Professional Documents
Culture Documents
www.corus-servicecentres.com
Index Index
3.0 Certification
2 3
1.0 Product Standards
The past fifteen years have seen a major transformation in respect of 2. The standards covering hot dip galvanised products were also
the standards used to describe steels used widely in industry today; amongst the first to be published; cold forming grades in 1991
practically all relevant British standards have been declared obsolete (EN 10142) and structural grades in 1992 (EN 10147). These
and have been replaced with European standards. An important two standards have been subject to more change than most,
principle governing the relationship between European and national culminating in a complete restructuring encompassing all hot dip
standards, whether they be British, French or German etc, is that coated products - a pair of new product standards published in
adoption of the former is mandatory, albeit that a reasonable 2004. Accordingly, following a transition period, these two
transition period is allowed - usually 12 to 18 months. This means standards will be obsolete. The replacements are EN 10326
that once a European standard replacing an existing national covering structural steels, and EN 10327 covering steels suitable
standard has been published, the latter is, within a short period of for cold forming. To repeat, these two standards contain
time withdrawn and is no longer available from the national technical delivery information relating to all the established
standards body. metallic hot dipped products currently on the market.
European standards are exactly what they say they are. Thus BS EN In this section, there have already been two references to 'steel
10025 contains exactly the same text in the body of the document names'. As part of the important principle of European
as does DIN EN 10025 in Germany, apart from the obvious use of harmonisation, sets of rules have been constructed to govern the
the appropriate language; the contents of the tables are identical. way steel names are put together. These are set out in EN 10027-
1:1992 and PD 6622:1998; the latter is a Published Document
Euronorms and European standards are not one and the same. In
entitled 'Designation Systems for Steel - Additional Symbols', also
many instances, Euronorms were transformed into corresponding
referred to as CR 10260.
European standards, e.g. Eu 130 covering cold reduced formable
grades became EN 10130. (Euronorms were never widely used in
The following points have been extracted from these documents
the UK).
with the intention of providing an insight into the significance of the
A key characteristic of the way European standards are put together elements which go to make up the grades sold commonly by Corus
is that separate documents exist for, on the one hand, a description Service Centres. Key principles employed are:
of the products themselves, including a listing of the grades, or 'steel
names' as they are known, and on the other, the associated 1. There shall be one unique steel name for each steel.
dimensional tolerances and other physical attributes, e.g. flatness, 2. The symbols (letters and numbers) comprising the name shall be
straightness, sectional properties etc. written without any breaks.
3. The complete designation of a steel product where quoted in
A further feature is that there is an obligation on the relevant orders or similar contractual documents shall include, in addition
technical committees responsible for drawing up the standards to to the steel name, a reference to the document which contains
conduct reviews of their contents every five years or so. This means the technical delivery conditions specified for the grade. Thus,
that since the whole process of European standards harmonisation EN 10025-2 S275JR is acceptable, whereas simply S275JR is
started, some standards have already undergone very significant not.
revision, in some cases more than once. In terms of the products
sold by Corus Service Centres, there have been two important
examples of this since this booklet was last revised in 2004:
4 5
1.0 Product Standards
Sub group 1
}
S = Structural steels followed by a number
P = Steels for pressure purposes being the specified
minimum yield strength
L = Line pipe steels in MPa(1) for the
E = Engineering steels smallest thickness range.
Sub group 2
D = flat products for cold forming, followed by one of the
following letters:
6 7
1.1 Structural steels 1.3 Flat products for cold forming
Group 1 additional symbols are: Only group 1 additional symbols apply in this case, but a wide range
of symbols for ‘steel products’, i.e. coated products can apply as the
Impact Energy - Joules (J). Test Temperature
following demonstrates.
27J. 40J. 60J. 0
C.
JR KR LR 20 Additional symbols Additional symbols
J0 K0 L0 0 for steel: for steel products:
J2 K2 L2 -20 D = for hot dip coating +AS - aluminium silicon alloy
J3 K3 L3 -30 coating (‘Aludip’)
J4 K4 L4 -40 EK = for conventional enamelling +AZ - aluminium zinc alloy
J5 K5 L5 -50 (>50% Al ‘Aluzinc’)
J6 K6 L6 -60 ED = for direct-on enamelling +T - lead tin alloy (Terne)
Plus: +Z - zinc (galvanised)
M = thermomechanically rolled +ZA - zinc aluminium alloy
N = normalised, or normalised rolled (>50% Zn ‘Galfan’)
Q = quenched and tempered +ZE - electrolytic zinc (‘Zintec’)
G = other characteristics followed, where necessary by +ZF - hot dip zinc iron alloy
1 or 2 digits. (galvanneal)
+ZN - electrolytic zinc nickel
Group 2 additional symbols include:
alloy (‘Nizec’)
C = special cold forming D = hot dip coating
E = enamelling H = hollow section
L = low temperature W = weather resistant Steel names - Group 2
The detail of Group 2 is more difficult to grasp, but it does contain
Examples covered by these codes are stainless steels, high speed tool steels and 'engineering bar'. All
EN 10025-2 S275JR EN 10025-2 S275JRC these sub groups are defined in terms of their chemical composition.
EN 10025-5 S355K2W EN 10025-2 S355K2 In the steel service centre context, the remaining remarks are
EN 10210-1 S355J0H EN 10210-1 S275NLH confined to engineering bar, i.e. grades once covered by BS 970,
and which now find near equivalents in EN 10083. Thus:
EN 10219-1 S275MLH EN 10326 S350GD+Z
En3A is C22E which means 0.22% carbon average
(i.e. carbon content multiplied by 100, and E
1.2 Steels for pressure purposes signifies a maximum sulphur content).
8 9
2.0 European Standards:
Cross-reference with obsolete standards
EN 10025-2:2003 Hot rolled products of BS 4360: 1986 Weldable structural steels. S275JR 43B
non-alloy structural S355JR 50B
steels.
EN 10025:1990 Hot rolled products of non- S275JR Fe430B
EN 10025:1993 alloy structural steels S355JR Fe510B
EN 10130:1999 Cold-rolled low-carbon EN 10130:1991 Cold rolled low carbon steel DC01A FeP01A
steel flat products for flat products for cold
cold forming. BS 1449: forming. DC01A CR4GP
Part 1 1983
EN 10142:2000 Continuously hot-dip EN 10142:1991 Continuously hot-dip coated DX51D+Z275- FeP02G Z275
zinc coated low carbon low carbon steel sheet and N-A-C NA C
steel strip and sheet for strip for cold forming.
cold forming. BS 2989:1982 Continuously hot-dip zinc DX51D+Z275- Z2 G275 N
coated and iron-zinc alloy N-A-C Chromated
coated steel: wide strip,
sheet/plate and slit wide strip
EN 10147:2000 Continuously hot-dip EN 10147:1992 Continuously hot-dip zinc S350GD+Z275- Fe E350 G Z275
zinc coated structural coated unalloyed structural N-A-C NA C
steel strip and sheet BS 2989:1982 steel sheet and strip. Z35 G275 N
As above Chromated
10 11
2.2 Tolerances on dimensions and shape - 2.3.1 Hot finished hollow sections
flat rolled products
EN 10210 “Hot finished structural hollow sections of non-alloy and
Product Product Current Obsolete fine grain structural steels” has superseded sections defined by
Standard Tolerance Tolerance BS 4848: Part 2: 1991, and made from steels described by
Standard Standard BS 4360:1986.
Part 1:1994 Technical delivery requirements.
Part 2:1997 Tolerances, dimensions and sectional properties.
Reversing EN 10025-2 EN 10029: Various
mill plate 1991 Current S275J0H S275J2H S355J0H S355J2H
Obsolete 43C 43D 50C 50D
Hot rolled EN 10025-2 EN 10051: BS 1449
EN 10111 1992 2.3.2 Cold formed hollow sections
Obsolete Dimensions
and BS 4: Part 1 Not BS 4848:
properties 1980 applicable Part 4: 1972
12 13
2.5. Engineering bar
2.5.1 Rounds
Type Standard Grade* Size Range Size Range (Former Desgnation) Comments
Hot Rolled Brights 1955 1983/91/96
Cast iron:
- Grey EN 1561 EN-GJL-250 35 - 400 BS 1452:1990 GG25
- Spheroidal graphite EN 1563 EN-GJS-450-10 35 - 400 BS 2789:1985 GGG40
14 15
3.0 Certification
Introduction Changes
In the most recent editions of this stock range book, and for obvious Whereas previously, there were seven (7) certification options, there
good reason much has been made of the transition from national are now only (4); these can be summarised as follows:
specifications to European standards. The distinction has been
drawn between product standards and tolerance standards. By way Old New Content Non-specific/ Document
of contrast, little has been made of the very considerable number of Ref Ref Specific validated by
European standards which stand beside the two main groups, each Test Data
in a very important support role. Amongst these are those standards
2.1 2.1 Statement of Not The
which define the procedures to be adopted for carrying out the
compliance with order Applicable manufacturer
various mechanical tests applied to confirm the product meets with
the ordered specification. Another such standard is the one which 2.2 2.2 As above Non-specific As above
governs the whole subject of certification. In the case of European
standards this is EN 10204, which was first published in the United 2.3 Defunct - - -
Kingdom in 1991 as BS EN 10204:1991 Metallic products - Types of 3.1.A 3.2 See below
inspection documents.
3.1.B 3.1 Statement of Specific Note 1
Developments compliance with order
In the intervening years, and in accordance with the existing 3.1.C 3.2 Statement of compliance Specific Note 2
requirements to maintain the relevance of standards, reviews are 3.2 3.2 compliance with order
conducted at intervals by the appropriate technical committees. An
issue of which due account has had to be taken is the emergence
from Brussels of a number of directives targeted at specific market Note 1 The manufacturer's authorised inspection representative
sectors. Thus, as noted elsewhere in this book, EN 10025:2004 independent of the manufacturing department.
addresses the issues raised by the EU Construction Products
Directive. In the case of EN 10204:2004, a means is provided to Note 2 The manufacturer's authorised inspection representative
conform with the Essential Requirements of the New Approach independent of the manufacturing department and either the
Directive 97/23/EC of the European Parliament and the Council of purchaser's authorised inspection representative or the inspector
29 May 1997 on the approximation of the laws of the Member designated by the official regulations.
States concerning pressure equipment. For more information, reference should be made to the text of the
standard itself from which the tabulation above has been adapted.
Additional information is to be found in EN 10168:2004 Steel
products - Inspection documents - List of information and
description
16 17
4.0 Stock Range
Rounds
Thickness Thickness
3 4 5 6 8 10 12 15 16 20 25 30 35 40 45 50 60 65 75
6 0.22
8 0.39 0.50
25 3.85 0.59 0.79 0.98 1.18 1.57 1.96 2.36 2.94 3.92 4.91
30 5.55 0.71 0.94 1.18 1.41 1.88 2.36 2.83 3.53 4.71 5.89 7.07
35 7.55 0.82 1.10 1.37 1.65 2.20 2.75 3.30 4.12 9.62
40 9.86 0.94 1.26 1.57 1.88 2.51 3.14 3.77 4.71 6.28 7.85 9.42 12.60
45 12.50 1.06 1.49 1.77 2.12 2.83 3.53 4.24 5.31 7.07 8.83 10.65 15.90
50 15.41 1.18 1.57 1.96 2.36 3.14 3.93 4.71 5.89 7.85 9.81 11.78 15.70 19.60
60 22.20 1.41 1.88 2.36 2.83 3.77 4.71 5.65 7.07 9.42 11.78 14.13 16.49 18.84 28.30
65 26.00 1.53 2.04 2.55 3.06 4.08 5.10 6.12 7.65 10.21 12.76 15.31 17.85 20.41 22.96 25.52 33.20
70 30.20 1.65 2.76 3.30 4.40 5.50 6.59 8.24 10.99 13.74 16.49 21.96 27.48
75 34.70 1.77 2.36 2.94 3.53 4.71 5.89 7.07 8.83 11.80 14.70 17.70 23.60 29.45 35.45 38.32 44.20
80 38.50 1.89 2.51 3.14 3.77 5.02 6.28 7.54 9.42 12.56 15.70 18.84 22.02 25.12 28.26 31.40 40.82 40.82
85 44.50
90 49.90 2.12 2.83 3.53 4.24 5.65 7.07 8.48 10.60 14.13 17.66 21.20 24.73 28.26 31.79 35.33
95 55.60
100 61.70 2.36 3.14 3.93 4.71 6.28 7.85 9.42 11.78 15.70 19.63 23.55 27.48 31.40 35.33 39.25 47.10 51.11 58.90
105 68.00
110 74.60 2.59 4.32 5.18 6.91 8.64 10.36 12.95 17.27 21.59 25.90 34.54 38.86 43.18
115 81.50
120 88.00 4.71 5.65 7.54 9.42 11.30 14.09 18.84 23.55 28.35
125 96.30
Continued...
18 19
4.1 Rounds, squares and flats
Mass per unit
length (kg/m)
Squares and Flats Squares and Flats
Diameter
Width /
Rounds
Thickness Thickness
3 4 5 6 8 10 12 15 20 25 30 35 40 45 50 60 65 75
130 104.00 3.06 4.08 5.10 6.12 8.16 10.21 12.25 15.31 20.41 25.51 30.62 40.80 45.92 51.03 61.23 76.50
135 112.00
140 121.00 6.59 8.79 10.99 13.20 16.49 21.98 27.48 32.99
145 130.00
150 139.00 3.54 4.71 5.89 7.07 9.42 11.78 14.13 17.66 23.55 29.44 35.33 47.10 52.99 58.88 70.65 76.65 88.32
155 148.00
165 168.00
170 178.00
180 200.00 7.07 8.48 11.31 14.13 16.96 21.20 28.26 35.33 42.39 56.52 70.60
185 211.00
190 223.00
195 234.00
200 247.00 6.30 9.42 12.60 15.70 18.84 23.55 31.41 39.25 47.10 62.80 70.65 78.50 117.75
210 272.00
220 298.00 8.64 10.36 13.82 17.27 20.72 25.91 34.54 43.18 51.81 69.08 86.35
240 356.00
250 385.00 11.78 15.70 19.60 23.55 29.44 39.25 49.06 58.88 78.50 88.31 98.13
260 417.00
270 448.00
280 483.00
300 555.00 14.13 23.55 28.26 35.33 47.10 58.88 70.65 94.20 105.98 117.75 141.35
305 573.00
20 21
4.2 Half rounds 4.5 Continuously rolled hot rolled sheet and plate
To EN 10025-2:2004 S275JR The thinner gauges of hot rolled strip are produced on continuous
wide strip mills. They are coiled up after rolling and when cold they
Solid Feather edge Square edge are cut up into sheets (< 3 mm) or plates (>/= 3 mm)
Size(mm) kg/m Size(mm) kg/m Size(mm) kg/m
In terms of thickness, there is considerable overlap between the
50 x 25 7.71 19 x 4.8 0.49 38 x 13 x 6.4 3.18 products of reversing mills and strip mills, but the latter benefits from
19 x 6.4 0.67 having the capability of rolling very much wider than a strip mill. On
62 x 31 11.86 19 x 10.0 1.10 44 x 13 x 6.4 3.57 the other hand, the strip mill product is characterised by a better
surface finish and improved control of thickness.
76 x 38 17.90 25 x 4.8 0.64 51 x 13 x 6.4 4.17
25 x 6.0 0.86 51 x 13 x 8.0 5.13 The range of materials available from a strip mill is almost limitless,
25 x 10.0 1.37 51 x 13 x 9.5 6.55 but for general engineering applications and fabrication work, three
products are capable of meeting most common requirements:
32 x 6.0 1.07
32 x 10.0 1.65 EN 10111:1998 DD11 as HR4 ceases to be available
BS 1449-1.2:1991 HR4 - Drawing quality
38 x 6.0 1.26
38 x 10.0 1.95 EN 10025-2:2004 S275JR - Mild steel,
38 x 13.0 3.18 Structural quality; guaranteed minimum
yield stress: 275 MPa
51 x 10.0 2.60 EN 10025-2:2004 S355JR - HYS,
51 x 13.0 4.17 Structural quality; guaranteed minimum
yield stress: 355 MPa
4.3 Re-rolled tees While there is obvious flexibility in cutting up coils, certain standard
sizes (mm) are commonly available:
Metric (mm) kg/m
2000 2500 3000 6000 4000 4000 4000 6000
40 x 40 x 5 2.97
x x x x x x x x
40 x 40 x 6 3.52
1000 1250 1500 1500 1750 1830 2000 2000
50 x 50 x 6 4.47
Thickness
Section No. Calculated weight (mm) 1.6 2.0 2.5 3.0 4.0 5.0
kg per metre
Mass
13 13.306 (kg/m2) 12.6 15.7 19.6 23.6 31.4 39.6
16 15.947 Thickness
(mm) 6.0 8.0 10.0 12.5 15.0 20.0
20 19.861
Mass
28 28.523 (kg/m2) 47 63 79 98 118 157
35 35.213
50 50.412
22 23
4.6 Cold reduced mild steel sheet 4.7 Mild steel hot dip galvanised sheets
The normal cut-off point for hot rolled products is around 1.5mm A range of standard sizes of hot dip galvanised sheet is available,
thick. Customers requiring thinner material should buy a cold manufactured to EN 10327:2004. It should be noted BS 2989 and
reduced product. While this is more expensive it offers significant all versions of EN 10142 are obsolete. Thus the designations Z2 and
benefits; the surface is far superior, as is the dimensional control, FeP02G are also obsolete. Instead, reference should be made to
especially thickness. Nevertheless, in pure dimensional terms there is DX51D+Z275-N-A-C. This is now the correct designation for the
an area of overlap between hot rolled and cold reduced products of product which used to be known as Z2, with a 275 gram/metre2 zinc
approximately 1.5mm, between about 1.5mm and 3.0mm. coating, including both surfaces exhibiting a spangle finish, which
has been chromated to protect it from the formation of white rust.
However, it should be remembered that the strength of the cold
reduced product will be significantly less than that of what appears It should be added that the availability of bright spangle galvanised
to be an equivalent hot rolled product. sheets is likely to diminish, as the switch to “minimised” spangle and
smooth continues. This is for environmental reasons; the spangle is
Standard cold reduced products are manufactured to the European promoted by the addition of lead, or latterly antimony to the zinc
standard EN 10130, which replaced BS 1449. bath. Both elements are toxic.
General purpose ‘mild steel’ sheets to EN 10130, made to Standard sheet sizes (mm) commonly available are:
DC01 Am oiled, are available in a variety of standard sizes in
thicknesses from 0.6 mm to 3.0 mm.
2000 2500 3000
These standard sheet sizes (mm) are: x x x
1000 1250 1500
2000 2500 3000
x x x
Standard thicknesses (mm) with the corresponding mass per unit
1000 1250 1500 area values (kg/m2) are shown in the table below. It should be noted
that in measuring the thickness of these products, it is the combined
thickness of steel substrate plus zinc which is quoted - not the
Standard thicknesses (mm), with corresponding mass per unit area substrate on its own.
values (kg/m2) are shown in the following table:
Thickness
Thickness (mm) 0.5 0.6 0.8 0.9 1.0 1.2
(mm) 0.6 0.8 0.9 1.0 1.2 1.25
Mass
Mass (kg/m2) 3.96 4.75 6.32 7.10 7.89 9.46
(kg/m2) 4.71 6.28 7.07 7.85 9.42 9.62
Thickness
Thickness (mm) 1.25 1.5 1.6 2.0 2.5 3.0
(mm) 1.5 1.6 2.0 2.5 3.0
Mass
Mass (kg/m2) 9.85 11.81 12.60 15.74 19.66 23.59
(kg/m2) 11.78 12.56 15.70 19.63 23.55
24 25
4.8 Reversing mill plate Plate thicknesses (mm) available, together with the corresponding
mass per unit area (kg/m2), are as follows - shaded items indicate
‘standards’:
A comprehensive range of sizes of reversing mill plate is available,
suitable for a wide variety of applications.
Thickness
(mm) 8 10 12.5 15 20 25
Specifically, this includes structural grades suitable for general
fabrication and engineering purposes, grades for pipe making and Mass
ship building, and for fired and unfired pressure vessels. Finally, there (kg/m2) 62.80 78.50 98.10 117.75 157.00 196.25
are materials suitable for applications where wear resistance is a Thickness
requirement. Examples include: (mm) 30 35 40 45 50 55
Mass
Structural EN 10025-2:2004 S275JR - Mild Steel (kg/m2) 235.50 274.75 314.00 353.25 392.50 431.75
S355JR - HYS
Thickness
Pipe making API A, B (mm) 60 65 70 75 80 85
X42, X46 Mass
X52 (kg/m2) 471.00 510.25 549.50 588.75 628.00 667.25
Thickness
Ship building Lloyds Register Grade A (mm) 90 95 100 105 110 115
Mass
Pressure vessel EN 10028-2:1993 161-360
(kg/m2) 706.50 745.75 785.00 863.50 902.75 942.00
400
430 Thickness
(mm) 130 135 140 150 160 180
Wear resistance Abrazo 160 EN 10083-1:1991 C30E Mass
(BS 970 En 5 -> 080M30) (kg/m2) 1021 1060 1099 1178 1256 1413
Thickness
180 EN 10083-1:1991 C40E
(mm) 200 250
(BS 970 En 8 -> 080M40)
Mass
200 EN 10083-1:1991 C55E (kg/m2) 1570 1963
(BS 970 En 9 -> 070M55)
26 27
4.9.1 Flooring products -
Flowforge® steel flooring panels
20 x 3 20 x 5 25 x 3 25 x 5 30 x 3 30 x 5 35 x 3 35 x 5 40 x 3 40 x 5 45 x 5 50 x 5 55 x 5 60 x 5
Weight kg/m 2
13.50 21.40 16.50 26.30 19.40 31.20 22.30 36.10 25.30 41.00 45.90 50.80 55.70 60.60
1800 3.88 3.70 6.17 5.53 9.21 13.12 18.00 23.96 30.55
Clear Span (mm)
1650 3.02 5.04 4.81 8.01 7.18 11.96 17.03 23.37 30.55 36.36
1500 3.88 4.03 6.72 6.40 10.67 9.55 15.92 22.68 30.55 36.97 44.00
1350 3.20 5.33 5.53 9.21 8.78 14.63 13.11 21.85 30.55 37.72 45.64 54.32
1200 3.88 5.80 7.59 7.87 13.12 12.50 20.84 18.33 30.55 38.67 47.74 57.76 68.75
1050 3.48 5.80 6.80 11.33 11.75 19.59 18.33 30.55 23.94 39.90 50.51 62.35 75.45 89.79
900 5.53 9.21 10.80 18.00 18.33 30.55 24.95 41.58 32.59 54.32 68.75 84.87 102.7 122.2
750 9.55 15.92 18.33 30.55 26.40 44.00 35.93 59.88 46.93 78.22 99.00 122.22 147.9 176.00
600 18.33 30.55 28.64 47.74 41.25 68.75 56.14 93.57 73.33 122.22 154.68 190.97 231.1 275.00
This will be the most cost effective section for you to use to fully
achieve your loading requirements
28 29
4.9.2 Flooring Products - Durbar floor plate
1000 1250
x x
2000 2500
Thickness
(mm)
(on plain) 3 4.5 6 8
Mass per
unit area
(kg/m2) 24.9 36.9 48.7 64.4
30 31
b y
*1016 x 305 x 487 487.0 1036.1 308.5 30.0 54.1 30.0 867.8 2.85 29.0 1020400 26720
*1016 x 305 x 438 438.0 1025.9 305.4 26.9 49.0 30.0 868.0 3.12 32.3 908900 23440
*1016 x 305 x 393 393.0 1016.0 303.0 24.4 43.9 30.0 868.2 3.45 35.7 806600 20490
*1016 x 305 x 349 349.0 1008.1 302.0 21.1 40.0 30.0 868.0 3.78 41.2 722100 18460
*1016 x 305 x 314 314.0 1000.0 300.0 19.1 35.9 30.0 868.2 4.18 45.6 643200 16230
*1016 x 305 x 272 272.0 990.1 300.0 16.5 31.0 30.0 868.0 4.84 52.7 552900 14000
*1016 x 305 x 249 249.0 980.2 300.0 16.5 26.0 30.0 868.0 5.77 52.7 480300 11750
*1016 x 305 x 222 222.0 970.3 300.0 16.0 21.1 30.0 867.8 7.11 54.4 406900 9544
914 x 419 x 388 388.0 921.0 420.5 21.4 36.6 24.1 799.6 5.74 37.4 719600 45440
914 x 419 x 343 343.3 911.8 418.5 19.4 32.0 24.1 799.6 6.54 41.2 625800 39160
914 x 305 x 289 289.1 926.6 307.7 19.5 32.0 19.1 824.4 4.81 42.3 504200 15600
914 x 305 x 253 253.4 918.4 305.5 17.3 27.9 19.1 824.4 5.47 47.7 436300 13300
914 x 305 x 224 224.2 910.4 304.1 15.9 23.9 19.1 824.4 6.36 51.8 376400 11240
914 x 305 x 201 200.9 903.0 303.3 15.1 20.2 19.1 824.4 7.51 54.6 325300 9423
838 x 292 x 226 226.5 850.9 293.8 16.1 26.8 17.8 761.7 5.48 47.3 339700 11360
838 x 292 x 194 193.8 840.7 292.4 14.7 21.7 17.8 761.7 6.74 51.8 279200 9066
838 x 292 x 176 175.9 834.9 291.7 14.0 18.8 17.8 761.7 7.76 54.4 246000 7799
762 x 267 x 197 196.8 769.8 268.0 15.6 25.4 16.5 686.0 5.28 44.0 240000 8175
762 x 267 x 173 173.0 762.2 266.7 14.3 21.6 16.5 686.0 6.17 48.0 205300 6850
762 x 267 x 147 146.9 754.0 265.2 12.8 17.5 16.5 686.0 7.58 53.6 168500 5455
762 x 267 x 134 133.9 750.0 264.4 12.0 15.5 16.5 686.0 8.53 57.2 150700 4788
686 x 254 x 170 170.2 692.9 255.8 14.5 23.7 15.2 615.1 5.40 42.4 170300 6630
686 x 254 x 152 152.4 687.5 254.5 13.2 21.0 15.2 615.1 6.06 46.6 150400 5784
686 x 254 x 140 140.1 683.5 253.7 12.4 19.0 15.2 615.1 6.68 49.6 136300 5183
686 x 254 x 125 125.2 677.9 253.0 11.7 16.2 15.2 615.1 7.81 52.6 11800 4383
610 x 305 x 238 238.1 635.8 311.4 18.4 31.4 16.5 540.0 4.96 29.3 209500 15840
610 x 305 x 179 179.0 620.2 307.1 14.1 23.6 16.5 540.0 6.51 38.3 153000 11410
610 x 305 x 149 149.1 612.4 304.8 11.8 19.7 16.5 540.0 7.74 45.8 125900 9308
610 x 229 x 140 139.9 617.2 230.2 13.1 22.1 12.7 547.6 5.21 41.8 111800 4505
610 x 229 x 125 125.1 612.2 229.0 11.9 19.6 12.7 547.6 5.84 46.0 98610 3932
610 x 229 x 113 113.0 607.6 228.2 11.1 17.3 12.7 547.6 6.60 49.3 87320 3434
610 x 229 x 101 101.2 602.6 227.6 10.5 14.8 12.7 547.6 7.69 52.2 75780 2915
533 x 210 x 122 122.0 544.5 211.9 12.7 21.3 12.7 476.5 4.97 37.5 76040 3388
533 x 210 x 109 109.0 539.5 210.8 11.6 18.8 12.7 476.5 5.61 41.1 66820 2943
533 x 210 x 101 101.0 536.7 210.0 10.8 17.4 12.7 476.5 6.03 44.1 61520 2692
533 x 210 x 92 92.1 533.1 209.3 10.1 15.6 12.7 476.5 6.71 47.2 55230 2389
533 x 210 x 82 82.2 528.3 208.8 9.6 13.2 12.7 476.5 7.91 49.6 47540 2007
457 x 191 x 98 98.3 467.2 192.8 11.4 19.6 10.2 407.6 4.92 35.8 45730 2347
457 x 191 x 89 89.3 463.4 191.9 10.5 17.7 10.2 407.6 5.42 38.8 41020 2089
457 x 191 x 82 82.0 460.0 191.3 9.9 16.0 10.2 407.6 5.98 41.2 37050 1871
457 x 191 x 74 74.3 457.0 190.4 9.0 14.5 10.2 407.6 6.57 45.3 33320 1671
457 x 191 x 67 67.1 453.4 189.9 8.5 12.7 10.2 407.6 7.48 48.0 29380 1452
*Please consult with Account Manager for steel supply lead time.
32 33
b y
Designation Radius of Gyration Elastic Modulus Plastic Modulus Buckling Torsional Warping Torsional Area of Mass
Parameter Index Constant Constant Section per Metre
Axis Axis Axis Axis Axis Axis
x-x y-y x-x y-y x-x y-y H J
cm cm cm3 cm3 cm3 cm3 u x dm6 cm4 cm2 kg/m
*1016 x 305 x 487 40.6 6.57 19720 1732 23200 2800 0.867 21.1 64.4 4299 620 486.6
*1016 x 305 x 437 40.4 6.49 17740 1535 20760 2469 0.868 23.1 55.9 3185 557 436.9
*1016 x 305 x 393 40.2 6.40 15900 1353 18540 2168 0.868 25.5 48.4 2330 500 392.7
*1016 x 305 x 349 40.3 6.44 14350 1223 16590 1941 0.872 27.9 43.3 1718 445 349.4
*1016 x 305 x 314 40.1 6.37 12880 1082 14850 1713 0.872 30.7 37.7 1264 400 314.3
*1016 x 305 x 272 40.0 6.35 11190 934 12830 1470 0.873 35.0 32.2 835 347 272.3
*1016 x 305 x 249 39.0 6.09 9821 784 11350 1245 0.861 39.9 26.8 582 317 248.7
*1016 x 305 x 222 38.0 5.81 8409 636 9807 1020 0.850 45.7 21.5 390 283 222.0
914 x 419 x 388 38.2 9.59 15630 2161 17670 3341 0.885 26.7 88.9 1734 494 388.0
914 x 419 x 343 37.8 9.46 13730 1871 15480 2890 0.883 30.1 75.8 1193 437 343.3
914 x 305 x 289 37.0 6.51 10880 1014 12570 1601 0.867 31.9 31.2 926 368 289.1
914 x 305 x 253 36.8 6.42 9501 871 10940 1371 0.866 36.2 26.4 626 323 253.4
914 x 305 x 224 36.3 6.27 8269 739 9535 1163 0.861 41.3 22.1 422 286 224.2
914 x 305 x 201 35.7 6.07 7204 621 8351 982 0.854 46.8 18.4 291 256 200.9
838 x 292 x 226 34.3 6.27 7985 773 9155 1212 0.870 35.0 19.3 514 289 226.5
838 x 292 x 194 33.6 6.06 6641 620 7640 974 0.862 41.6 15.2 306 247 193.8
838 x 292 x 176 33.1 5.90 5893 535 6808 842 0.856 46.5 13.0 221 224 175.9
762 x 267 x 197 30.9 5.71 6234 610 7176 959 0.869 33.2 11.3 404 251 196.8
762 x 267 x 173 30.5 5.58 5387 514 6198 807 0.864 38.1 9.39 267 220 173.0
762 x 267 x 147 30.0 5.40 4470 411 5156 647 0.858 45.2 7.40 159 187 146.9
762 x 267 x 134 29.7 5.30 4018 362 4644 570 0.854 49.8 6.46 119 171 133.9
686 x 254 x 170 28.0 5.53 4916 518 5631 811 0.872 31.8 7.42 308 217 170.2
686 x 254 x 152 27.8 5.46 4374 455 5000 710 0.871 35.5 6.42 220 194 152.4
686 x 254 x 140 27.6 5.39 3987 409 4558 638 0.868 38.7 5.72 169 178 140.1
686 x 254 x 125 27.2 5.24 3481 346 3994 542 0.862 43.9 4.80 116 159 125.2
610 x 305 x 238 26.3 7.23 6589 1017 7486 1574 0.886 21.3 14.5 785 303 238.1
610 x 305 x 179 25.9 7.07 4935 743 5547 1144 0.886 27.7 10.2 340 228 179.0
610 x 305 x 149 25.7 7.00 4111 611 4594 937 0.886 32.7 8.18 200 190 149.1
610 x 229 x 140 25.0 5.03 3622 391 4142 611 0.875 30.6 3.99 216 178 139.9
610 x 229 x 125 24.9 4.97 3221 343 3676 535 0.873 34.1 3.45 154 159 125.1
610 x 229 x 113 24.6 4.88 2874 301 3281 469 0.870 38.0 2.99 111 144 113.0
610 x 229 x 101 24.2 4.75 2515 256 2881 400 0.864 43.1 2.52 77.0 129 101.2
533 x 210 x 122 22.1 4.67 2793 320 3196 500 0.877 27.6 2.32 178 155 122.0
533 x 210 x 109 21.9 4.60 2477 279 2828 436 0.875 30.9 1.99 126 139 109.0
533 x 210 x 101 21.9 4.57 2292 256 2612 399 0.874 33.2 1.81 101 129 101.0
533 x 210 x 92 21.7 4.51 2072 228 2360 356 0.872 36.5 1.60 75.7 117 92.1
533 x 210 x 82 21.3 4.38 1800 192 2059 300 0.864 41.6 1.33 51.5 105 82.2
457 x 191 x 98 19.1 4.33 1957 243 2232 379 0.881 25.7 1.18 121 125 98.3
457 x 191 x 89 19.0 4.29 1770 218 2014 338 0.880 28.3 1.04 90.7 114 89.3
457 x 191 x 82 18.8 4.23 1611 196 1831 304 0.877 30.9 0.922 69.2 104 82.0
457 x 191 x 74 18.8 4.20 1458 176 1653 272 0.877 33.9 0.818 51.8 94.6 74.3
457 x 191 x 67 18.5 4.12 1296 153 1471 237 0.872 37.9 0.705 37.1 85.5 67.1
*Please consult with Account Manager for steel supply lead time.
34 35
b y
Designation Mass Depth Width Thickness Thickness Root Depth Ratios for Second Moment
per of Section of Section Web Flange Radius between Local Buckling of Area
metre fillets Axis Axis
h b s t r d Flange Web x-x y-y
kg/m mm mm mm mm mm mm b/2t d/s cm4 cm4
457 x 152 x 82 82.1 465.8 155.3 10.5 18.9 10.2 407.6 4.11 38.8 36590 1185
457 x 152 x 74 74.2 462.0 154.4 9.6 17.0 10.2 407.6 4.54 42.5 32670 1047
457 x 152 x 67 67.2 458.0 153.8 9.0 15.0 10.2 407.6 5.13 45.3 28930 913
457 x 152 x 60 59.8 454.6 152.9 8.1 13.3 10.2 407.6 5.75 50.3 25500 795
457 x 152 x 52 52.3 449.8 152.4 7.6 10.9 10.2 407.6 6.99 53.6 21370 645
406 x 178 x 74 74.2 412.8 179.5 9.5 16.0 10.2 360.4 5.61 37.9 27310 1545
406 x 178 x 67 67.1 409.4 178.8 8.8 14.3 10.2 360.4 6.25 41.0 24330 1365
406 x 178 x 60 60.1 406.4 177.9 7.9 12.8 10.2 360.4 6.95 45.6 21600 1203
406 x 178 x 54 54.1 402.6 177.7 7.7 10.9 10.2 360.4 8.15 46.8 18720 1021
406 x 140 x 46 46.0 403.2 142.2 6.8 11.2 10.2 360.4 6.35 53.0 15690 538
406 x 140 x 39 39.0 398.0 141.8 6.4 8.6 10.2 360.4 8.24 56.3 12510 410
356 x 171 x 67 67.1 363.4 173.2 9.1 15.7 10.2 311.6 5.52 34.2 19460 1362
356 x 171 x 57 57.0 358.0 172.2 8.1 13.0 10.2 311.6 6.62 38.5 16040 1108
356 x 171 x 51 51.0 355.0 171.5 7.4 11.5 10.2 311.6 7.46 42.1 14140 968
356 x 171 x 45 45.0 351.4 171.1 7.0 9.7 10.2 311.6 8.82 44.5 12070 811
356 x 127 x 39 39.1 353.4 126.0 6.6 10.7 10.2 311.6 5.89 47.2 10170 358
356 x 127 x 33 33.1 349.0 125.4 6.0 8.5 10.2 311.6 7.38 51.9 8249 280
305 x 165 x 54 54.0 310.4 166.9 7.9 13.7 8.9 265.2 6.09 33.6 11700 1063
305 x 165 x 46 46.1 306.6 165.7 6.7 11.8 8.9 265.2 7.02 39.6 9899 896
305 x 165 x 40 40.3 303.4 165.0 6.0 10.2 8.9 265.2 8.09 44.2 8503 764
305 x 127 x 48 48.1 311.0 125.3 9.0 14.0 8.9 265.2 4.47 29.5 9575 461
305 x 127 x 42 41.9 307.2 124.3 8.0 12.1 8.9 265.2 5.14 33.2 8196 389
305 x 127 x 37 37.0 304.4 123.3 7.1 10.7 8.9 265.2 5.77 37.4 7171 336
305 x 102 x 33 32.8 312.7 102.4 6.6 10.8 7.6 275.9 4.74 41.8 6501 194
305 x 102 x 28 28.2 308.7 101.8 6.0 8.8 7.6 275.9 5.78 46.0 5366 155
305 x 102 x 25 24.8 305.1 101.6 5.8 7.0 7.6 275.9 7.26 47.6 4455 123
254 x 146 x 43 43.0 259.6 147.3 7.2 12.7 7.6 219.0 5.80 30.4 6544 677
254 x 146 x 37 37.0 256.0 146.4 6.3 10.9 7.6 219.0 6.72 34.8 5537 571
254 x 146 x 31 31.1 251.4 146.1 6.0 8.6 7.6 219.0 8.49 36.5 4413 448
254 x 102 x 28 28.3 260.4 102.2 6.3 10.0 7.6 225.2 5.11 35.7 4005 179
254 x 102 x 25 25.2 257.2 101.9 6.0 8.4 7.6 225.2 6.07 37.5 3415 149
254 x 102 x 22 22.0 254.0 101.6 5.7 6.8 7.6 225.2 7.47 39.5 2841 119
203 x 133 x 30 30.0 206.8 133.9 6.4 9.6 7.6 172.4 6.97 26.9 2896 385
203 x 133 x 25 25.1 203.2 133.2 5.7 7.8 7.6 172.4 8.54 30.2 2340 308
203 x 102 x 23 23.1 203.2 101.8 5.4 9.3 7.6 169.4 5.47 31.4 2105 164
178 x 102 x 19 19.0 177.8 101.2 4.8 7.9 7.6 146.8 6.41 30.6 1356 137
152 x 89 x 16 16.0 152.4 88.7 4.5 7.7 7.6 121.8 5.76 27.1 834 89.8
127 x 76 x 13 13.0 127.0 76.0 4.0 7.6 7.6 96.6 5.00 24.1 473 55.7
36 37
b y
Designation Radius of Gyration Elastic Modulus Plastic Modulus Buckling Torsional Warping Torsional Area of Mass
Parameter Index Constant Constant Section per Metre
Axis Axis Axis Axis Axis Axis
x-x y-y x-x y-y x-x y-y u x H J
cm cm cm3 cm3 cm3 cm3 dm6 cm4 cm2 kg/m
457 x 152 x 82 18.7 3.37 1571 153 1811 240 0.873 27.4 0.591 89.2 105 82.1
457 x 152 x 74 18.6 3.33 1414 136 1627 213 0.873 30.1 0.518 65.9 94.5 74.2
457 x 152 x 67 18.4 3.27 1263 119 1453 187 0.869 33.6 0.448 47.7 85.6 67.2
457 x 152 x 60 18.3 3.23 1122 104 1287 163 0.868 37.5 0.387 33.8 76.2 59.8
457 x 152 x 52 17.9 3.11 950 84.6 1096 133 0.859 43.9 0.311 21.4 66.6 52.3
406 x 178 x 74 17.0 4.04 1323 172 1501 267 0.882 27.6 0.608 62.8 94.5 74.2
406 x 178 x 67 16.9 3.99 1189 153 1346 237 0.880 30.5 0.533 46.1 85.5 67.1
406 x 178 x 60 16.8 3.97 1063 135 1199 209 0.880 33.8 0.466 33.3 76.5 60.1
406 x 178 x 54 16.5 3.85 930 115 1055 178 0.871 38.3 0.392 23.1 69.0 54.1
406 x 140 x 46 16.4 3.03 778 75.7 888 118 0.871 38.9 0.207 19.0 58.6 46.0
406 x 140 x 39 15.9 2.87 629 57.8 724 90.8 0.858 47.5 0.155 10.7 49.7 39.0
356 x 171 x 67 15.1 3.99 1071 157 1211 243 0.886 24.4 0.412 55.7 85.5 67.1
356 x 171 x 57 14.9 3.91 896 129 1010 199 0.882 28.8 0.330 33.4 72.6 57.0
356 x 171 x 51 14.8 3.86 796 113 896 174 0.881 32.1 0.286 23.8 64.9 51.0
356 x 171 x 45 14.5 3.76 687 94.8 775 147 0.874 36.8 0.237 15.8 57.3 45.0
356 x 127 x 39 14.3 2.68 576 56.8 659 89.1 0.871 35.2 0.105 15.1 49.8 39.1
356 x 127 x 33 14.0 2.58 473 44.7 543 70.3 0.863 42.2 0.0812 8.79 42.1 33.1
305 x 165 x 54 13.0 3.93 754 127 846 196 0.889 23.6 0.234 34.8 68.8 54.0
305 x 165 x 46 13.0 3.90 646 108 720 166 0.891 27.1 0.195 22.2 58.7 46.1
305 x 165 x 40 12.9 3.86 560 92.6 623 142 0.889 31.0 0.164 14.7 51.3 40.3
305 x 127 x 48 12.5 2.74 616 73.6 711 116 0.873 23.3 0.102 31.8 61.2 48.1
305 x 127 x 42 12.4 2.70 534 62.6 614 98.4 0.872 26.5 0.0846 21.1 53.4 41.9
305 x 127 x 37 12.3 2.67 471 54.5 539 85.4 0.872 29.7 0.0725 14.8 47.2 37.0
305 x 102 x 33 12.5 2.15 416 37.9 481 60.0 0.866 31.6 0.0442 12.2 41.8 32.8
305 x 102 x 28 12.2 2.08 348 30.5 403 48.5 0.859 37.4 0.0349 7.40 35.9 28.2
305 x 102 x 25 11.9 1.97 292 24.2 342 38.8 0.846 43.4 0.0273 4.77 31.6 24.8
254 x 146 x 43 10.9 3.52 504 92.0 566 141 0.891 21.2 0.103 23.9 54.8 43.0
254 x 146 x 37 10.8 3.48 433 78.0 483 119 0.890 24.3 0.0857 15.3 47.2 37.0
254 x 146 x 31 10.5 3.36 351 61.3 393 94.1 0.880 29.6 0.0660 8.55 39.7 31.1
254 x 102 x 28 10.5 2.22 308 34.9 353 54.8 0.874 27.5 0.0280 9.57 36.1 28.3
254 x 102 x 25 10.3 2.15 266 29.2 306 46.0 0.866 31.5 0.0230 6.42 32.0 25.2
254 x 102 x 22 10.1 2.06 224 23.5 259 37.3 0.856 36.4 0.0182 4.15 28.0 22.0
203 x 133 x 30 8.71 3.17 280 57.5 314 88.2 0.881 21.5 0.0374 10.3 38.2 30.0
203 x 133 x 25 8.56 3.10 230 46.2 258 70.9 0.877 25.6 0.0294 5.96 32.0 25.1
203 x 102 x 23 8.46 2.36 207 32.2 234 49.8 0.888 22.5 0.0154 7.02 29.4 23.1
178 x 102 x 19 7.48 2.37 153 27.0 171 41.6 0.888 22.6 0.00987 4.41 24.3 19.0
152 x 89 x 16 6.41 2.10 109 20.2 123 31.2 0.890 19.6 0.00470 3.56 20.3 16.0
127 x 76 x 13 5.35 1.84 74.6 14.7 84.2 22.6 0.895 16.3 0.00199 2.85 16.5 13.0
38 39
b y
Designation Mass Depth Width Thickness Thickness Root Depth Ratios for Second Moment of
per of Section of Section Web Flange Radius between Local Buckling Area
metre fillets Flange Web Axis Axis
h b s t r d b/2t d/s x-x y-y
kg/m mm mm mm mm mm mm cm4 cm4
*356 x 406 x 634 633.9 474.6 424.0 47.6 77.0 15.2 290.2 2.75 6.10 274800 98130
*356 x 406 x 551 551.0 455.6 418.5 42.1 67.5 15.2 290.2 3.10 6.89 226900 82670
*356 x 406 x 467 467.0 436.6 412.2 35.8 58.0 15.2 290.2 3.55 8.11 183000 67830
*356 x 406 x 393 393.0 419.0 407.0 30.6 49.2 15.2 290.2 4.14 9.48 146600 55370
356 x 406 x 340 339.9 406.4 403.0 26.6 42.9 15.2 290.2 4.70 10.9 122500 46850
356 x 406 x 287 287.1 393.6 399.0 22.6 36.5 15.2 290.2 5.47 12.8 99880 38680
356 x 406 x 235 235.1 381.0 394.8 18.4 30.2 15.2 290.2 6.54 15.8 79080 30990
356 x 368 x 202 201.9 374.6 374.4 16.5 27.0 15.2 290.2 6.94 17.6 66260 23690
356 x 368 x 177 177.0 368.2 372.6 14.4 23.8 15.2 290.2 7.83 20.2 57120 20530
356 x 368 x 153 152.9 362.0 370.5 12.3 20.7 15.2 290.2 8.95 23.6 48590 17550
356 x 368 x 129 129.0 355.6 368.6 10.4 17.5 15.2 290.2 10.5 27.9 40250 14610
305 x 305 x 283 282.9 365.3 322.2 26.8 44.1 15.2 246.7 3.65 9.21 78870 24630
305 x 305 x 240 240.0 352.5 318.4 23.0 37.7 15.2 246.7 4.22 10.7 64200 20310
305 x 305 x 198 198.1 339.9 314.5 19.1 31.4 15.2 246.7 5.01 12.9 50900 16300
305 x 305 x 158 158.1 327.1 311.2 15.8 25.0 15.2 246.7 6.22 15.6 38750 12570
305 x 305 x 137 136.9 320.5 309.2 13.8 21.7 15.2 246.7 7.12 17.9 32810 10700
305 x 305 x 118 117.9 314.5 307.4 12.0 18.7 15.2 246.7 8.22 20.6 27670 9059
305 x 305 x 97 96.9 307.9 305.3 9.9 15.4 15.2 246.7 9.91 24.9 22250 7308
254 x 254 x 167 167.1 289.1 265.2 19.2 31.7 12.7 200.3 4.18 10.4 30000 9870
254 x 254 x 132 132.0 276.3 261.3 15.3 25.3 12.7 200.3 5.16 13.1 22530 7531
254 x 254 x 107 107.1 266.7 258.8 12.8 20.5 12.7 200.3 6.31 15.6 17510 5928
254 x 254 x 89 88.9 260.3 256.3 10.3 17.3 12.7 200.3 7.41 19.4 14270 4857
254 x 254 x 73 73.1 254.1 254.6 8.6 14.2 12.7 200.3 8.96 23.3 11410 3908
203 x 203 x 86 86.1 222.2 209.1 12.7 20.5 10.2 160.8 5.10 12.7 9449 3127
203 x 203 x 71 71.0 215.8 206.4 10.0 17.3 10.2 160.8 5.97 16.1 7618 2537
203 x 203 x 60 60.0 209.6 205.8 9.4 14.2 10.2 160.8 7.25 17.1 6125 2065
203 x 203 x 52 52.0 206.2 204.3 7.9 12.5 10.2 160.8 8.17 20.4 5259 1778
203 x 203 x 46 46.1 203.2 203.6 7.2 11.0 10.2 160.8 9.25 22.3 4568 1548
152 x 152 x 37 37.0 161.8 154.4 8.0 11.5 7.6 123.6 6.71 15.4 2210 706
152 x 152 x 30 30.0 157.6 152.9 6.5 9.4 7.6 123.6 8.13 19.0 1748 560
152 x 152 x 23 23.0 152.4 152.2 5.8 6.8 7.6 123.6 11.2 21.3 1250 400
*Please consult with Account Manager for steel supply lead time.
40 41
b y
Designation Radius of Gyration Elastic Modulus Plastic Modulus Buckling Torsional Warping Torsional Area of Mass
Parameter Index Constant Constant Section per Metre
Axis Axis Axis Axis Axis Axis
x-x y-y x-x y-y x-x y-y u x H J
cm cm cm3 cm3 cm3 cm3 dm6 cm4 cm2 kg/m
*356 x 406 x 634 18.4 11.0 11580 4629 14240 7108 0.843 5.46 38.8 13720 808 633.9
*356 x 406 x 551 18.0 10.9 9962 3951 12080 6058 0.841 6.05 31.1 9240 702 551.0
*356 x 406 x 467 17.5 10.7 8383 3291 10000 5034 0.839 6.86 24.3 5809 595 467.0
*356 x 406 x 393 17.1 10.5 6998 2721 8222 4154 0.837 7.86 18.9 3545 501 393.0
356 x 406 x 340 16.8 10.4 6031 2325 6999 3544 0.836 8.85 15.5 2343 433 339.9
356 x 406 x 287 16.5 10.3 5075 1939 5812 2949 0.835 10.2 12.3 1441 366 287.1
356 x 406 x 235 16.3 10.2 4151 1570 4687 2383 0.834 12.1 9.54 812 299 235.1
356 x 368 x 202 16.1 9.60 3538 1264 3972 1920 0.844 13.4 7.16 558 257 201.9
356 x 368 x 177 15.9 9.54 3103 1102 3455 1671 0.844 15.0 6.09 381 226 177.0
356 x 368 x 153 15.8 9.49 2684 948 2965 1435 0.844 17.0 5.11 251 195 152.9
356 x 368 x 129 15.6 9.43 2264 793 2479 1199 0.844 19.9 4.18 153 164 129.0
305 x 305 x 283 14.8 8.27 4318 1529 5105 2342 0.855 7.65 6.35 2034 360 282.9
305 x 305 x 240 14.5 8.15 3643 1276 4247 1951 0.854 8.74 5.03 1271 306 240.0
305 x 305 x 198 14.2 8.04 2995 1037 3440 1581 0.854 10.2 3.88 734 252 198.1
305 x 305 x 158 13.9 7.90 2369 808 2680 1230 0.851 12.5 2.87 378 201 158.1
305 x 305 x 137 13.7 7.83 2048 692 2297 1053 0.851 14.2 2.39 249 174 136.9
305 x 305 x 118 13.6 7.77 1760 589 1958 895 0.850 16.2 1.98 161 150 117.9
305 x 305 x 97 13.4 7.69 1445 479 1592 726 0.850 19.3 1.56 91.2 123 96.9
254 x 254 x 167 11.9 6.81 2075 744 2424 1137 0.851 8.49 1.63 626 213 167.1
254 x 254 x 132 11.6 6.69 1631 576 1869 878 0.850 10.3 1.19 319 168 132.0
254 x 254 x 107 11.3 6.59 1313 458 1484 697 0.848 12.4 0.898 172 136 107.1
254 x 254 x 89 11.2 6.55 1096 379 1224 575 0.850 14.5 0.717 102 113 88.9
254 x 254 x 73 11.1 6.48 898 307 992 465 0.849 17.3 0.562 57.6 93.1 73.1
203 x 203 x 86 9.28 5.34 850 299 977 456 0.850 10.2 0.318 137 110 86.1
203 x 203 x 71 9.18 5.30 706 246 799 374 0.853 11.9 0.250 80.2 90.4 71.0
203 x 203 x 60 8.96 5.20 584 201 656 305 0.846 14.1 0.197 47.2 76.4 60.0
203 x 203 x 52 8.91 5.18 510 174 567 264 0.848 15.8 0.167 31.8 66.3 52.0
203 x 203 x 46 8.82 5.13 450 152 497 231 0.847 17.7 0.143 22.2 58.7 46.1
152 x 152 x 37 6.85 3.87 273 91.5 309 140 0.848 13.3 0.0399 19.2 47.1 37.0
152 x 152 x 30 6.76 3.83 222 73.3 248 112 0.849 16.0 0.0308 10.5 38.3 30.0
152 x 152 x 23 6.54 3.70 164 52.6 182 80.2 0.840 20.7 0.0212 4.63 29.3 23.0
*Please consult with Account Manager for steel supply lead time.
42 43
b y
r2 r1 98
o
5.3 Joists s x x
h
Material to EN 10025-2:2004 t y
Dimensions and properties to BS 4-1:1993
Inside Slope 8o
Designation Mass Depth of Width of Thickness Thickness Radius Radius Depth Ratios for Second Moment Radius of
per Section Section Web Flange Root Toe between Local Buckling of Area gyration
metre fillets Flange Web Axis Axis Axis Axis
h b s t r1 r2 d b/2t d/s x-x y-y x-x y-y
4
kg/m mm mm mm mm mm mm mm cm cm4 cm cm
254 x 203 x 82 82.0 254.0 203.2 10.2 19.9 19.6 9.7 166.6 5.11 16.3 12020 2280 10.7 4.67
203 x 152 x 52 52.3 203.2 152.4 8.9 16.5 15.5 7.6 133.2 4.62 15.0 4798 816 8.49 3.50
152 x 127 x 37 37.3 152.4 127.0 10.4 13.2 13.5 6.6 94.3 4.81 9.07 1818 378 6.19 2.82
127 x 114 x 29 29.3 127.0 114.3 10.2 11.5 9.9 4.8 79.5 4.97 7.79 979 242 5.12 2.54
127 x 114 x 27 26.9 127.0 114.3 7.4 11.4 9.9 5.0 79.5 5.01 10.7 946 236 5.26 2.63
102 x 102 x 23 23.0 101.6 101.6 9.5 10.3 11.1 3.2 55.2 4.93 5.81 486 154 4.07 2.29
102 x 44 x 7 7.5 101.6 44.5 4.3 6.1 6.9 3.3 74.6 3.65 17.3 153 7.82 4.01 0.907
89 x 89 x 19 19.5 88.9 88.9 9.5 9.9 11.1 3.2 44.2 4.49 4.65 307 101 3.51 2.02
76 x 76 x 13 12.8 76.2 76.2 5.1 8.4 9.4 4.6 38.1 4.54 7.47 158 51.8 3.12 1.79
Designation Elastic Modulus Plastic Modulus Buckling Torsional Warping Torsional Area of Mass
Parameter Index Constant Constant Section per Metre
Axis Axis Axis Axis
x-x y-y x-x y-y u x H J
cm3 cm3 cm3 cm3 dm6 cm4 cm2 kg/m
254 x 203 x 82 947 224 1077 371 0.890 11.0 0.312 152 105 82.0
203 x 152 x 52 472 107 541 176 0.891 10.7 0.0711 64.8 66.6 52.3
152 x 127 x 37 239 59.6 279 99.8 0.866 9.33 0.0183 33.9 47.5 37.3
127 x 114 x 29 154 42.3 181 70.8 0.853 8.76 0.00807 20.8 37.4 29.3
127 x 114 x 27 149 41.3 172 68.2 0.868 9.32 0.00788 16.9 34.2 26.9
102 x 102 x 23 95.6 30.3 113 50.6 0.836 7.43 0.00321 14.2 29.3 23.0
102 x 44 x 7 30.1 3.51 35.4 6.03 0.872 14.9 0.000178 1.25 9.50 7.5
89 x 89 x 19 69.0 22.8 82.7 38.0 0.830 6.57 0.00158 11.5 24.9 19.5
76 x 76 x 13 41.5 13.6 48.7 22.4 0.852 7.22 0.000595 4.59 16.2 12.8
All joists subject to minimum order size. Please refer to Account Manager.
44 45
y
b cy
5.4 Channels r1
h s d x x
Designation Mass Depth Width Thickness Thickness Distance Root Depth Ratios for Second Moment
per of Section of Section Web Flange of Radius between Local Buckling of Area
metre Cy fillets Flange Web Axis Axis
h b s t r1 d b/t d/s x-x y-y
4
kg/m mm mm mm mm mm mm mm cm cm4
430 X 100 X 64 64.4 430 100 11.0 19.0 2.62 15 362 5.26 32.9 21940 722
380 X 100 X 54 54.0 380 100 9.5 17.5 2.79 15 315 5.71 33.2 15030 643
300 X 100 X 46 45.5 300 100 9.0 16.5 3.05 15 237 6.06 26.3 8229 568
300 X 90 X 41 41.4 300 90 9.0 15.5 2.60 12 245 5.81 27.2 7218 404
260 X 90 X 35 34.8 260 90 8.0 14.0 2.74 12 208 6.43 26.0 4728 353
260 X 75 X 28 27.6 260 75 7.0 12.0 2.10 12 212 6.25 30.3 3619 185
230 X 90 X 32 32.2 230 90 7.5 14.0 2.92 12 178 6.43 23.7 3518 334
230 X 75 X 26 25.7 230 75 6.5 12.5 2.30 12 181 6.00 27.8 2748 181
200 X 90 X 30 29.7 200 90 7.0 14.0 3.12 12 148 6.43 21.1 2523 314
200 X 75 X 23 23.4 200 75 6.0 12.5 2.48 12 151 6.00 25.2 1963 170
180 X 90 X 26 26.1 180 90 6.5 12.5 3.17 12 131 7.20 20.2 1817 277
180 X 75 X 20 20.3 180 75 6.0 10.5 2.41 12 135 7.14 22.5 1370 146
150 X 90 X 24 23.9 150 90 6.5 12.0 3.30 12 102 7.50 15.7 1162 253
150 X 75 X 18 17.9 150 75 5.5 10.0 2.58 12 106 7.50 19.3 861 131
125 X 65 X 15 14.8 125 65 5.5 9.5 2.25 12 82 6.84 14.9 483 80.0
100 X 50 X 10 10.2 100 50 5.0 8.5 1.73 9 65 5.88 13.0 208 32.3
46 47
y
b cy
Material to EN 10025-2:2004 t y
Tolerances to BS EN 10279:2000
Designation Radius of Gyration Elastic Modulus Plastic Modulus Buckling Torsional Warping Torsional Area of Mass
Parameter Index Constant Constant Section per Metre
Axis Axis Axis Axis Axis Axis
x-x y-y x-x y-y x-x y-y u x H J
cm cm cm3 cm3 cm3 cm3 dm6 cm4 cm2 kg/m
430 x 100 x 64 16.3 2.97 1020 97.9 1222 176 0.917 22.5 0.219 63.0 82.1 64.4
380 x 100 x 54 14.8 3.06 791 89.2 933 161 0.932 21.2 0.150 45.7 68.7 54.0
300 x 100 x 46 11.9 3.13 549 81.7 641 148 0.944 17.0 0.0813 36.8 58.0 45.5
300 x 90 x 41 11.7 2.77 481 63.1 568 114 0.934 18.4 0.0581 28.8 52.7 41.4
260 x 90 x 35 10.3 2.82 364 56.3 425 102 0.942 17.2 0.0379 20.6 44.4 34.8
260 x 75 x 28 10.1 2.30 278 34.4 328 62.0 0.932 20.5 0.0203 11.7 35.1 27.6
230 x 90 x 32 9.27 2.86 306 55.0 355 98.9 0.950 15.1 0.0279 19.3 41.0 32.2
230 x 75 x 26 9.17 2.35 239 34.8 278 63.2 0.947 17.3 0.0153 11.8 32.7 25.7
200 x 90 x 30 8.16 2.88 252 53.4 291 94.5 0.954 12.9 0.0197 18.3 37.9 29.7
200 x 75 x 23 8.11 2.39 196 33.8 227 60.6 0.956 14.8 0.0107 11.1 29.9 23.4
180 x 90 x 26 7.40 2.89 202 47.4 232 83.5 0.949 12.8 0.0141 13.3 33.2 26.1
180 x 75 x 20 7.27 2.38 152 28.8 176 51.8 0.946 15.3 0.00754 7.34 25.9 20.3
150 x 90 x 24 6.18 2.89 155 44.4 179 76.9 0.936 10.8 0.00890 11.8 30.4 23.9
150 x 75 x 18 6.15 2.40 115 26.6 132 47.2 0.946 13.1 0.00467 6.10 22.8 17.9
125 x 65 x 15 5.07 2.06 77.3 18.8 89.9 33.2 0.942 11.1 0.00194 4.72 18.8 14.8
100 x 50 x 10 4.00 1.58 41.5 9.89 48.9 17.5 0.942 10.0 0.000491 2.53 13.0 10.2
Please consult with Account Manager for steel supply lead time.
48 49
y
b cy
Material to EN 10025-2:2004 t y
Tolerances to BS EN 10279:2000
Designation Mass Depth Width Thickness Thickness Distance Root Depth Ratios for Second Moment
per of Section of Section Web Flange of Radius between Local Buckling of Area
metre Cy fillets Flange Web Axis Axis
h b s t r1 d b/t d/s x-x y-y
kg/m mm mm mm mm mm mm mm cm4 cm4
76 x 38 6.70 76.2 38.1 5.1 6.8 1.19 7.6 45.8 5.60 8.98 74.1 10.7
Designation Radius of Gyration Elastic Modulus Plastic Modulus Buckling Torsional Warping Torsional Area of Mass
Parameter Index Constant Constant Section per Metre
Axis Axis Axis Axis Axis Axis
x-x y-y x-x y-y x-x y-y u x H J
cm cm cm3 cm3 cm3 cm3 dm6 cm4 cm2 kg/m
76 x 38 16.0 2.74 991.1 80.14 1207 153.1 0.908 9.170 0.000101 1.23 8.53 6.70
Also available*
40 x 20 x 5 60 x 30 x 6 80 x 45 x 6
40 x 35 x 5 60 x 40 x 6 100 x 50 x 6
50 x 25 x 5 65 x 42 x 5.5 120 x 55 x 7
50 x 38 x 5 70 x 40 x 6 140 x 60 x 7
50 51
v y u
o
a t 90
5.5 Equal angles x x r1
c r2
c t
y
Material to EN 10025-2:2004 u a
v
Dimensions and properties to EN 10056-1:1999
Designation Mass Radius Radius Area of Distance of Second Moment of Area Radiation of gyration Elastic
per Root Toe Section centre of gravity Axis Axis Axis Axis Axis Axis Modulus
metre r1 r2 cx and cy x-x, y-y u-u v-v x-x, y-y u-u v-v Axis
2
Max Min Max Min x-x, y-y
kg/m mm mm cm cm cm4 cm4 cm4 cm cm cm cm3
200 x 200 x 24 71.1 18.0 9.0 90.6 5.85 3356 5332 1391 6.08 7.65 3.91 237
200 x 200 x 20 59.9 18.0 9.0 76.6 5.70 2877 4569 1185 6.13 7.72 3.93 201
200 x 200 x 18 54.3 18.0 9.0 69.4 5.62 2627 4174 1080 6.15 7.76 3.95 183
200 x 200 x 16 48.5 18.0 9.0 62.0 5.54 2369 3765 973 6.18 7.79 3.96 164
150 x 150 x 18 40.1 16.0 8.0 51.2 4.38 1060 1680 440 4.55 5.73 2.93 99.8
150 x 150 x 15 33.8 16.0 8.0 43.2 4.26 909 1442 375 4.59 5.78 2.95 84.6
150 x 150 x 12 27.3 16.0 8.0 35.0 4.14 748 1187 308 4.62 5.82 2.97 68.9
150 x 150 x 10 23.0 16.0 8.0 29.5 4.06 635 1008 262 4.64 5.85 2.99 58.0
120 x 120 x 15 26.6 13.0 6.5 34.0 3.52 448 710 186 3.63 4.57 2.34 52.8
120 x 120 x 12 21.6 13.0 6.5 27.6 3.41 371 589 153 3.66 4.62 2.35 43.1
120 x 120 x 10 18.2 13.0 6.5 23.3 3.32 316 502 130 3.69 4.65 2.37 36.4
120 x 120 x 8 14.7 13.0 6.5 18.8 3.24 259 411 107 3.71 4.67 2.38 29.5
100 x 100 x 15 21.9 12.0 6.0 28.0 3.02 250 395 105 2.99 3.76 1.94 35.8
100 x 100 x 12 17.8 12.0 6.0 22.8 2.91 208 330 86.5 3.02 3.81 1.95 29.4
100 x 100 x 10 15.0 12.0 6.0 19.2 2.83 178 283 73.7 3.05 3.84 1.96 24.8
100 x 100 x 8 12.2 12.0 6.0 15.6 2.75 146 232 60.5 3.07 3.86 1.97 20.2
90 x 90 x 12 15.9 11.0 5.5 20.3 2.66 149 235 62.0 2.71 3.40 1.75 23.5
90 x 90 x 10 13.4 11.0 5.5 17.2 2.58 128 202 52.9 2.73 3.43 1.76 19.9
90 x 90 x 8 10.9 11.0 5.5 13.9 2.50 105 167 43.4 2.75 3.46 1.77 16.2
90 x 90 x 7 9.61 11.0 5.5 12.3 2.46 93.2 148 38.6 2.76 3.47 1.77 14.3
90 x 90 x 6 8.30 11.0 5.5 10.6 2.41 81.0 128 33.6 2.76 3.48 1.78 12.3
80 x 80 x 10 11.9 10.0 4.8 15.1 2.34 87.6 139 36.4 3.41 3.03 1.55 15.5
80 x 80 x 8 9.63 10.0 4.8 12.3 2.26 72.4 115 29.9 2.43 3.06 1.56 12.6
80 x 80 x 6 7.34 10.0 4.8 9.36 2.17 56.0 88.7 23.2 2.45 3.08 1.57 9.60
Also available*
75 x 75 x 8
75 x 75 x 6
Note: Sizes listed in bold italics are not covered by EN 10056-1: 1999.
Please refer to Corus for further information.
52 53
v y u
o
a t 90
5.5 Equal angles x x r1
c r2
c t
y
Material to EN 10025-2:2004 u a
v
Dimensions and properties to EN 10056-1:1999
Designation Mass Radius Radius Area of Distance of Second Moment of Area Radiation of gyration Elastic
per Root Toe Section centre of gravity Axis Axis Axis Axis Axis Axis Modulus
metre r1 r2 cx and cy x-x, y-y u-u v-v x-x, y-y u-u v-v Axis
2
Max Min Max Min x-x, y-y
kg/m mm mm cm cm cm4 cm4 cm4 cm cm cm cm3
70 x 70 x 10 10.3 9.0 2.4 13.1 2.10 558.0 91.6 4.4 2.10 2.64 1.36 11.8
70 x 70 x 8 8.36 9.0 2.4 10.7 2.02 48.3 76.5 20.1 2.12 2.67 1.37 9.70
70 x 70 x 6 6.38 9.0 2.4 8.19 1.94 37.7 59.8 15.6 2.15 2.70 1.38 7.45
60 x 60 x 10 8.69 8.0 2.4 11.1 1.85 35.3 55.6 15.0 1.78 2.24 1.16 8.51
60 x 60 x 8 7.09 8.0 2.4 9.07 1.78 29.6 46.7 12.4 1.80 2.27 1.18 7.00
60 x 60 x 6 5.42 8.0 2.4 6.95 1.70 23.2 36.8 9.64 1.83 2.30 1.18 5.39
60 x 60 x 5 4.57 8.0 2.4 5.86 1.65 19.8 31.4 8.23 1.84 2.31 1.18 4.56
50 x 50 x 8 5.82 7.0 2.4 7.44 1.53 16.5 25.9 6.96 1.49 1.87 0.968 4.74
50 x 50 x 6 4.47 7.0 2.4 5.72 1.45 13.0 20.6 5.43 1.51 1.90 0.974 3.67
50 x 50 x 5 3.77 7.0 2.4 4.83 1.41 11.1 17.07 4.63 1.52 1.91 0.979 3.11
50 x 50 x 4 3.06 7.0 2.4 3.92 1.37 9.16 14.5 3.82 1.53 1.92 0.987 2.52
50 x 50 x 3 2.33 7.0 2.4 2.99 1.32 7.06 11.1 2.97 1.54 1.93 0.996 1.92
45 x 45 x 6 4.00 7.0 2.4 5.12 1.33 9.30 14.7 3.90 1.35 1.69 0.872 2.93
45 x 45 x 5 3.38 7.0 2.4 4.33 1.29 7.99 12.6 3.33 1.36 1.71 0.877 2.49
45 x 45 x 4 2.74 7.0 2.4 3.52 1.24 6.58 10.4 2.75 1.37 1.72 0.883 2.02
45 x 45 x 3 2.09 7.0 2.4 2.69 1.20 5.08 8.03 2.14 1.37 1.73 0.892 1.54
40 x 40 x 6 3.52 6.0 2.4 4.49 1.20 6.37 10.1 2.68 1.19 1.50 0.773 2.28
40 x 40 x 5 2.97 6.0 2.4 3.80 1.17 5.48 8.68 2.29 1.20 1.51 0.776 1.93
40 x 40 x 4 2.42 6.0 2.4 3.09 1.12 4.53 7.18 1.89 1.21 1.52 0.781 1.58
40 x 40 x 3 1.84 6.0 2.4 2.36 1.08 3.51 5.55 1.47 1.22 1.53 0.788 1.20
30 x 30 x 5 2.18 5.0 2.4 2.78 0.919 2.17 3.42 0.919 0.883 1.11 0.575 1.04
30 x 30 x 4 1.78 5.0 2.4 2.27 0.879 1.81 2.86 0.756 0.893 1.12 0.577 0.852
30 x 30 x 3 1.36 5.0 2.4 1.74 0.836 1.41 2.23 0.588 0.900 1.13 0.581 0.652
25 x 25 x 5 1.77 3.5 2.4 2.25 0.796 1.19 1.87 0.515 0.728 0.912 0.478 0.701
25 x 25 x 4 1.45 3.5 2.4 1.84 0.758 1.00 1.58 0.421 0.737 0.926 0.478 0.574
25 x 25 x 3 1.12 3.5 2.4 1.41 0.718 0.784 1.24 0.325 0.745 0.939 0.480 0.440
Note: Sizes listed in bold italics are not covered by EN 10056-1: 1999.
Please refer to Corus for further information.
54 55
v y u r2
Designation Mass per Radius Radius Area of Distance of Second Moment of Area Radiation of gyration Elastic
metre Root Toe Section centre of Axis Axis Axis Axis Axis Axis Axis Axis Modulus
r1 r2 gravity x-x y-y u-u v-v x-x y-y u-u v-v Axis Axis
Cx Cy Max Min x-x y-y
2 4 4 4 4
kg/m mm mm cm cm cm cm cm cm cm cm cm cm cm cm3 cm3
200 x 150 x 18 47.1 15.0 4.8 60.1 6.34 3.86 2390 1155 2922 623 6.30 4.38 6.97 3.22 175 104
200 x 150 x 15 39.6 15.0 4.8 50.6 6.22 3.75 2037 989 2495 531 6.34 4.42 7.02 3.24 148 87.8
200 x 150 x 12 32.0 15.0 4.8 40.9 6.10 3.36 1667 812 2045 435 6.38 4.46 7.07 3.26 120 71.4
200 x 100 x 15 33.7 15.0 4.8 43.1 7.17 2.23 1772 303 1879 197 6.41 2.65 6.60 2.13 138 39.0
200 x 100 x 12 27.3 15.0 4.8 34.9 7.04 2.11 1454 252 1544 162 6.45 2.68 6.65 2.15 112 31.9
200 x 100 x 10 23.0 15.0 4.8 29.4 6.95 2.03 1233 215 1310 138 6.48 2.70 6.68 2.17 94.5 26.9
150 x 90 x 15 26.6 12.0 4.8 34.0 5.21 2.24 764 207 844 127 4.74 2.47 4.99 1.93 78.0 30.6
150 x 90 x 12 21.6 12.0 4.8 27.6 5.09 2.12 630 172 698 105 4.78 2.50 5.03 1.95 63.6 25.0
150 x 90 x 10 18.2 12.0 4.8 23.2 5.00 2.04 536 147 595 89.1 4.81 2.52 5.06 1.96 53.6 21.2
150 x 75 x 15 24.8 11.0 4.8 31.7 5.53 1.81 715 120 756 79.2 4.75 1.95 4.89 1.58 75.5 21.1
150 x 75 x 12 20.2 11.0 4.8 25.7 5.41 1.70 591 100 626 65.2 4.79 1.98 4.93 1.59 61.6 17.3
150 x 75 x 10 17.0 11.0 4.8 21.7 5.32 1.62 503 86.3 534 55.7 4.82 2.00 4.96 1.60 52.0 14.7
125 x 75 x 12 17.8 11.0 4.8 22.7 4.31 1.84 355 96.0 392 58.8 3.95 2.06 4.15 1.61 43.4 17.0
125 x 75 x 10 15.0 11.0 4.8 19.2 4.23 1.76 303 82.5 336 50.2 3.98 2.08 4.19 1.62 36.7 14.4
125 x 75 x 8 12.2 11.0 4.8 15.5 4.14 1.68 249 68.1 275 41.2 4.00 2.10 4.21 1.63 29.7 11.7
100 x 75 x 12 15.4 10.0 4.8 19.7 3.27 2.03 189 90.3 230 49.5 3.10 2.14 3.42 1.59 28.1 16.5
100 x 75 x 10 13.0 10.0 4.8 16.6 3.19 1.96 162 77.7 198 42.2 3.12 2.16 3.45 1.60 23.8 14.0
100 x 75 x 8 10.6 10.0 4.8 13.5 3.11 1.88 133 64.2 163 34.7 3.15 2.18 3.48 1.61 19.3 11.4
† 100 x 65 x 10 12.3 10.0 4.8 15.6 3.36 1.64 154 51.1 175 30.2 3.14 1.81 3.35 1.39 23.2 10.5
† 100 x 65 x 8 9.94 10.0 4.8 12.7 3.28 1.56 127 42.3 145 24.9 3.17 1.83 3.38 1.40 18.9 8.6
† 100 x 65 x 7 8.77 10.0 4.8 11.2 3.23 1.51 113 37.7 128 22.1 3.18 1.84 3.39 1.41 16.6 7.6
80 x 60 x 8 8.32 8.0 4.8 10.6 2.55 1.56 65.8 31.5 80.2 17.1 2.49 1.72 2.75 1.27 12.1 7.09
80 x 60 x 7 7.36 8.0 4.8 9.35 2.50 1.52 58.5 28.1 71.4 15.2 2.50 1.73 2.76 1.27 10.6 6.26
80 x 60 x 6 6.34 8.0 4.8 8.08 2.46 1.48 50.9 24.5 62.2 13.2 2.51 1.74 2.77 1.28 9.19 5.41
75 x 50 x 8 7.39 7.0 2.4 9.44 2.53 1.29 52.4 15.6 60.1 10.9 2.36 1.40 2.52 1.07 10.5 5.00
75 x 50 x 6 5.65 7.0 2.4 7.22 2.44 1.21 40.9 14.6 47.1 8.48 2.38 1.42 2.55 1.08 8.10 3.87
65 x 50 x 8 6.76 6.0 2.4 8.61 2.12 1.37 34.9 17.8 43.1 9.62 2.01 1.44 2.25 1.06 7.97 4.92
65 x 50 x 6 5.18 6.0 2.4 6.59 2.04 1.30 27.4 14.1 34.0 7.49 2.04 1.46 2.27 1.07 6.14 3.80
65 x 50 x 5 4.35 6.0 2.4 5.55 2.00 1.26 23.3 12.0 29.0 6.38 2.05 1.47 2.28 1.07 5.18 3.21
60 x 30 x 6 4.00 6.0 2.4 5.09 2.20 0.724 18.3 30.5 19.3 2.01 1.90 0.774 1.95 0.629 4.82 1.34
60 x 30 x 5 3.36 6.0 2.4 4.30 2.16 0.684 15.7 2.64 16.6 1.72 1.91 0.783 1.96 0.632 4.08 1.14
40 x 25 x 4 1.93 4.0 2.4 2.45 1.36 0.621 3.86 1.15 4.32 0.692 1.26 0.685 1.33 0.532 1.46 0.612
Note: Sizes listed in bold italics are not covered by EN 10056-1: 1999.
Please refer to Corus for further information.
Please refer to Account Manager for rolling availability. † Please refer to Account Manager for steel supply lead times.
56 57
5.7 Celsius® hot finished structural hollow sections
Dimensional tolerances
Square/Rectangular Circular
Outside dimension (D B and H) ± 1% with a min of ± 0.5mm ± 1% with a min of ± 0.5mm and max of ±10mm
Note. Positive deviation limited Note. Positive deviation limited by mass tolerance
by mass tolerance
Straightness Maximum 0.2% of the total length. Maximum 0.2% of the total length.
60 61
5.7 Celsius® hot finished structural hollow sections
62 63
5.7 Celsius® hot finished structural hollow sections
500 x 300 or Celsius 355 upon request and subject to increased minimum quantities.
®
T
Y
Celsius® 275 EN 10210 S275J2H
Hot finished circular hollow sections
Outside Thickness Mass Sectional Moment Radius Elastic Plastic Torsional Torsional Superficial Approx.
diameter area of of modulus modulus constant constant area/m length/
inertia gyration tonne
D T M A I i Wel Wpl lt Ct As
mm mm kg/m cm2 cm4 cm cm3 cm3 cm4 cm3 m2/m m/t
76.1 2.9 5.24 6.67 44.7 2.59 11.8 15.5 89.5 23.5 0.239 191
114.3 3.6 9.83 12.5 192 3.92 33.6 44.1 384 67.2 0.359 102
5.0 13.5 17.2 257 3.87 45.0 59.8 514 89.9 0.359 74.2
6.3 16.8 21.4 313 3.82 54.7 73.6 625 109 0.359 59.6
139.7 5.0 16.6 21.2 481 4.77 68.8 90.8 961 138 0.439 60.2
6.3 20.7 26.4 589 4.72 84.3 112 1177 169 0.439 48.2
Non-regular production
66 67
Y
40 x 40 4.0 4.39 5.59 11.8 1.45 5.91 7.44 19.5 8.54 0.150 228
50 x 50 4.0 5.64 7.19 25.0 1.86 9.99 12.3 40.4 14.5 0.190 177
5.0 6.85 8.73 28.9 1.82 11.6 14.5 47.6 16.7 0.187 146
60 x 60 5.0 8.42 10.7 53.3 2.23 17.8 21.9 86.4 25.7 0.227 119
80 x 80 6.3 14.2 18.1 162 2.99 40.5 49.7 262 58.7 0.304 70.2
100 x100 4.0 11.9 15.2 232 3.91 46.4 54.4 361 68.2 0.390 83.9
5.0 14.7 18.7 279 3.86 55.9 66.4 439 81.8 0.387 68.0
6.3 18.2 23.2 336 3.80 67.1 80.9 534 97.8 0.384 54.9
10.0 27.4 34.9 462 3.64 92.4 116 761 133 0.374 36.5
120 x120 6.3 22.2 28.2 603 4.62 100 120 950 147 0.464 45.1
150 x150 6.3 28.1 35.8 1223 5.85 163 192 1909 240 0.584 35.6
10.0 43.1 54.9 1773 5.68 236 286 2832 344 0.574 23.2
200 x200 10.0 58.8 74.9 4471 7.72 447 531 7031 655 0.774 17.0
400 x400 12.5 151 192 47839 15.8 2392 2782 73906 3530 1.57 6.63
Non-regular production
68 69
Y
120 x 80 6.3 18.2 23.2 440 230 4.36 3.15 73.3 57.6 91.0 68.2 487 92.9 0.384 54.9
10.0 27.4 34.9 609 313 4.18 2.99 102 78.1 131 97.3 688 126 0.374 36.5
150 x 100 6.3 23.1 29.5 898 474 5.52 4.01 120 94.8 147 110 986 153 0.484 43.2
160 x 80 6.3 22.2 28.2 903 299 5.66 3.26 113 74.8 142 86.8 730 127 0.464 45.1
10.0 33.7 42.9 1284 411 5.47 3.10 161 103 209 125 1041 175 0.454 29.7
200 x 100 8.0 35.1 44.8 2234 739 7.06 4.06 223 148 282 172 1804 251 0.579 28.5
10.0 43.1 54.9 2664 869 6.96 3.98 266 174 341 206 2156 295 0.574 23.2
12.5 52.7 67.1 3136 1004 6.84 3.87 314 201 408 245 2541 341 0.568 19.0
250 x 150 6.3 38.0 48.4 4143 1874 9.25 6.22 331 250 402 283 4054 413 0.784 26.3
12.5 72.3 92.1 7387 3265 8.96 5.96 591 435 740 514 7326 717 0.768 13.8
300 x 200 16.0 115 147 17390 9109 10.9 7.87 1159 911 1441 1080 19252 1468 0.959 8.67
400 x 200 16.0 141 179 35738 11824 14.1 8.13 1787 1182 2256 1374 28871 2010 1.16 7.12
450 x 250 16.0 166 211 55705 22041 16.2 10.2 2476 1763 3070 2029 50545 2947 1.36 6.04
Non-regular production
70 71
D
Y
5.7 Celsius® hot finished structural hollow sections
X X
T
Y
Celsius® 355 EN 10210 S355J2H
Hot finished circular hollow sections
Outside Thickness Mass Sectional Moment Radius Elastic Plastic Torsional Torsional Superficial Approx.
diameter area of of modulus modulus constant constant area/m length/
inertia gyration tonne
D T M A I i Wel Wpl lt Ct As
mm mm kg/m cm2 cm4 cm cm3 cm3 cm4 cm3 m2/m m/t
26.9 3.2 1.87 2.38 1.70 0.85 1.27 1.81 3.41 2.53 0.085 535
33.7 2.6 1.99 2.54 3.09 1.103 1.84 2.52 6.19 3.67 0.106 415
3.2 2.41 3.07 3.60 1.084 2.14 2.99 7.21 4.28 0.106 341
4.0 2.93 3.73 4.19 1.060 2.49 3.55 8.38 4.97 0.106 341
42.4 3.2 3.09 3.94 7.62 1.39 3.59 4.93 15.2 7.19 0.133 323
4.0 3.79 4.83 8.99 1.36 4.24 5.92 18.0 8.48 0.133 264
48.3 3.2 3.56 4.53 11.6 1.60 4.80 6.52 23.2 9.59 0.152 281
4.0 4.37 5.57 13.8 1.57 5.70 7.87 27.5 11.4 0.152 229
5.0 5.34 6.8 16.2 1.54 6.69 9.42 32.3 13.4 0.152 187
60.3 3.2 4.51 5.74 23.5 2.02 7.78 10.4 46.9 15.6 0.186 222
4.0 5.55 7.07 28.2 2.00 9.34 12.7 56.3 18.7 0.189 180
5.0 6.82 8.69 33.5 1.96 11.1 15.3 67.0 22.2 0.189 147
76.1 2.9 5.24 6.67 44.7 2.59 11.8 15.5 89.5 23.5 0.239 191
3.2 5.75 7.33 48.8 2.58 12.8 17.0 97.6 25.6 0.239 174
4.0 7.11 9.06 59.1 2.55 15.5 20.8 118 31.0 0.239 141
5.0 8.77 11.2 70.9 2.52 18.6 25.3 142 37.3 0.239 114
88.9 3.2 6.76 8.62 79.2 3.03 17.8 23.5 158 35.6 0.27 148
4.0 8.38 10.7 96.3 3.00 21.7 28.9 193 43.3 0.279 119
5.0 10.3 13.2 116 2.97 26.2 35.2 233 52.4 0.279 96.7
6.3 12.8 16.3 140 2.93 31.5 43.1 280 63.1 0.279 77.9
114.3 3.2 8.77 11.2 172 3.93 30.2 39.5 345 60.4 0.359 114
3.6 9.83 12.5 192 3.92 33.6 44.1 384 67.2 0.359 102
4.0 10.9 13.9 211 3.90 36.9 48.7 422 73.9 0.359 92
5.0 13.5 17.2 257 3.87 45.0 59.8 514 89.9 0.359 74.2
6.3 16.8 21.4 313 3.82 54.7 73.6 625 109 0.359 59.6
139.7 5.0 16.6 21.2 481 4.77 68.8 90.8 961 138 0.439 60.2
6.3 20.7 26.4 589 4.72 84.3 112 1177 169 0.439 48.2
8.0 26.0 33.1 720 4.66 103 139 1441 206 0.439 38.5
10.0 32.0 40.7 862 4.60 123 169 1724 247 0.439 31.3
168.3 5.0 20.1 25.7 856 5.78 102 133 1712 203 0.529 49.7
6.3 25.2 32.1 1053 5.73 125 165 2107 250 0.529 39.7
8.0 31.6 40.3 1297 5.67 154 206 2595 308 0.529 31.6
10.0 39.0 49.7 1564 5.61 186 251 3128 372 0.529 25.6
T
Y
Celsius® 355 EN 10210 S355J2H
Hot finished circular hollow sections
Outside Thickness Mass Sectional Moment Radius Elastic Plastic Torsional Torsional Superficial Approx.
diameter area of of modulus modulus constant constant area/m length/
inertia gyration tonne
D T M A I i Wel Wpl lt Ct As
mm mm kg/m cm2 cm4 cm cm3 cm3 cm4 cm3 m2/m m/t
193.7 5.0 23.3 29.6 1320 6.67 136 178 2640 273 0.609 43.0
6.3 29.1 37.1 1630 6.63 168 221 3260 337 0.609 34.3
8.0 36.6 46.7 2016 6.57 208 276 4031 416 0.609 27.3
10.0 45.3 57.7 2442 6.50 252 338 4883 504 0.609 22.1
219.1 5.0 26.4 33.6 1928 7.57 176 229 3856 352 0.688 37.9
6.3 33.1 42.1 2386 7.53 218 285 4772 436 0.688 30.2
8.0 41.6 53.1 2960 7.47 270 357 5919 540 0.688 24.0
10.0 51.6 65.7 3598 7.40 328 438 7197 657 0.688 19.4
12.5 63.7 81.1 4345 7.32 397 534 8689 793 0.688 15.7
244.5 8.0 46.7 59.4 4160 8.37 340 448 8321 681 0.768 21.4
10.0 57.8 73.7 5073 8.30 415 550 10146 830 0.768 17.3
12.5 71.5 91.1 6147 8.21 503 673 12295 1006 0.768 14.0
16.0 90.2 115 7533 8.10 616 837 15066 1232 0.768 11.1
273.0 6.3 41.4 52.8 4696 9.43 344 448 9392 688 0.858 24.1
8.0 52.3 66.6 5852 9.37 429 562 11703 857 0.858 19.1
10.0 64.9 82.6 7154 9.31 524 692 14308 1048 0.858 15.4
12.5 80.3 102 8697 9.22 637 849 17395 1274 0.858 12.5
16.0 101 129 10707 9.10 784 1058 21414 1569 0.858 9.86
323.9 6.3 49.3 62.9 7929 11.2 490 636 15858 979 1.02 20.3
8.0 62.3 79.4 9910 11.2 612 799 19820 1224 1.02 16.0
10.0 77.4 98.6 12158 11.1 751 986 24317 1501 1.02 12.9
12.5 96.0 122 14847 11.0 917 1213 29693 1833 1.02 10.4
16.0 121 155 18390 10.9 1136 1518 36780 2271 1.02 8.23
355.6 16.0 134 171 24663 12.0 1387 1847 49326 2774 1.12 7.46
406.4 12.5 121 155 30031 13.9 1478 1940 60061 2956 1.28 8.24
16.0 154 196 37449 13.8 1843 2440 74898 3686 1.28 6.49
457.0 16.0 174 222 53959 15.6 2361 3113 107919 4723 1.44 5.75
508.0 10.0 123 156 48520 17.6 1910 2480 97040 3820 1.60 8.14
16.0 194 247 74909 17.4 2949 3874 149818 5898 1.60 5.15
Non-regular production
74 75
Y
40 x 40 3.0 3.41 4.34 9.78 1.50 4.89 5.97 15.7 7.10 0.152 293
3.2 3.61 4.60 10.2 1.49 5.11 6.28 16.5 7.42 0.152 277
4.0 4.39 5.59 11.8 1.45 5.91 7.44 19.5 8.54 0.150 228
5.0 5.28 6.73 13.4 1.41 6.68 8.66 22.5 9.60 0.147 189
50 x 50 3.0 4.35 5.54 20.2 1.91 8.08 9.70 32.1 11.8 0.192 230
3.2 4.62 5.88 21.2 1.90 8.49 10.2 33.8 12.4 0.192 217
4.0 5.64 7.19 25.0 1.86 9.99 12.3 40.4 14.5 0.190 177
5.0 6.85 8.73 28.9 1.82 11.6 14.5 47.6 16.7 0.187 146
6.3 8.31 10.6 32.8 1.76 13.1 17.0 55.2 18.8 0.184 120
60 x 60 3.0 5.29 6.74 36.2 2.32 12.1 14.3 56.9 17.7 0.232 189
3.2 5.62 7.16 38.2 2.31 12.7 15.2 60.2 18.6 0.232 178
4.0 6.90 8.79 45.4 2.27 15.1 18.3 72.5 22.0 0.230 145
5.0 8.42 10.7 53.3 2.23 17.8 21.9 86.4 25.7 0.227 119
6.3 10.3 13.1 61.6 2.17 20.5 26.0 102 29.6 0.224 97.2
8.0 12.5 16.0 69.7 2.09 23.2 30.4 118 33.4 0.219 79.9
70 x 70 3.6 7.40 9.42 68.6 2.70 19.6 23.3 108 28.7 0.271 135
5.0 9.99 12.7 88.5 2.64 25.3 30.8 142 36.8 0.267 100
6.3 12.3 15.6 104 2.58 29.7 36.9 169 42.9 0.264 81.5
8.0 15.0 19.2 120 2.50 34.2 43.8 200 49.2 0.259 66.5
80 x 80 3.6 8.53 10.9 105 3.11 26.2 31.0 164 38.5 0.311 117
4.0 9.41 12.0 114 3.09 28.6 34.0 180 41.9 0.310 106
5.0 11.6 14.7 137 3.05 34.2 41.1 217 49.8 0.307 86.5
6.3 14.2 18.1 162 2.99 40.5 49.7 262 58.7 0.304 70.2
8.0 17.5 22.4 189 2.91 47.3 59.5 312 68.3 0.299 57.0
90 x 90 3.6 9.66 12.3 152 3.52 33.8 39.7 237 49.7 0.351 104
4.0 10.7 13.6 166 3.50 37.0 43.6 260 54.2 0.350 93.7
5.0 13.1 16.7 200 3.45 44.4 53.0 316 64.8 0.347 76.1
6.3 16.2 20.7 238 3.40 53.0 64.3 382 77.0 0.344 61.6
8.0 20.1 25.6 281 3.32 62.6 77.6 459 90.5 0.339 49.9
100 x 100 4.0 11.9 15.2 232 3.91 46.4 54.4 361 68.2 0.390 83.9
5.0 14.7 18.7 279 3.86 55.9 66.4 439 81.8 0.387 68.0
6.3 18.2 23.2 336 3.80 67.1 80.9 534 97.8 0.384 54.9
8.0 22.6 28.8 400 3.73 79.9 98.2 646 116 0.379 44.3
10.0 27.4 34.9 462 3.64 92.4 116 761 133 0.374 36.5
▲ SAW process
Non-regular production †† Hot formed from seamless hollow Continued...
76 77
Y
120 x 120 5.0 17.8 22.7 498 4.68 83.0 97.6 777 122 0.467 56.0
6.3 22.2 28.2 603 4.62 100 120 950 147 0.464 45.1
8.0 27.6 35.2 726 4.55 121 146 1160 176 0.459 36.2
10.0 33.7 42.9 852 4.46 142 175 1382 206 0.454 29.7
12.5 40.9 52.1 982 4.34 164 207 1623 236 0.448 24.5
140 x 140 5.0 21.0 26.7 807 5.50 115 135 1253 170 0.547 47.7
6.3 26.1 33.3 984 5.44 141 166 1540 206 0.544 38.3
8.0 32.6 41.6 1195 5.36 171 204 1892 249 0.539 30.7
10.0 40.0 50.9 1416 5.27 202 246 2272 294 0.534 25.0
12.5 48.7 62.1 1653 5.16 236 293 2696 342 0.528 20.5
150 x 150 5.0 22.6 28.7 1002 5.90 134 156 1550 197 0.587 44.3
6.3 28.1 35.8 1223 5.85 163 192 1909 240 0.584 35.6
8.0 35.1 44.8 1491 5.77 199 237 2351 291 0.579 28.5
10.0 43.1 54.9 1773 5.68 236 286 2832 344 0.574 23.2
12.5 52.7 67.1 2080 5.57 277 342 3375 402 0.568 19.0
16.0†† 65.2 83.0 2430 5.41 324 411 4026 467 0.559 15.3
160 x 160 5.0 24.1 30.7 1225 6.31 153 178 1892 226 0.627 41.5
6.3 30.1 38.3 1499 6.26 187 220 2333 275 0.624 33.3
8.0 37.6 48.0 1831 6.18 229 272 2880 335 0.619 26.6
10.0 46.3 58.9 2186 6.09 273 329 3478 398 0.614 21.6
12.5 56.6 72.1 2576 5.98 322 395 4158 467 0.608 17.7
180 x 180 6.3 34.0 43.3 2168 7.07 241 281 3361 355 0.704 29.4
8.0 42.7 54.4 2661 7.00 296 349 4162 434 0.699 23.4
10.0 52.5 66.9 3193 6.91 355 424 5048 518 0.694 19.0
12.5 64.4 82.1 3790 6.80 421 511 6070 613 0.688 15.5
16.0 80.2 102 4504 6.64 500 621 7343 724 0.679 12.5
200 x 200 5.0 30.4 38.7 2445 7.95 245 283 3756 362 0.787 32.9
6.3 38.0 48.4 3011 7.89 301 350 4653 444 0.784 26.3
8.0 47.7 60.8 3709 7.81 371 436 5778 545 0.779 21.0
10.0 58.8 74.9 4471 7.72 447 531 7031 655 0.774 17.0
12.5 72.3 92.1 5336 7.61 534 643 8491 778 0.768 13.8
16.0 90.3 115 6394 7.46 639 785 10340 927 0.759 11.1
250 x 250 6.3 47.9 61.0 6014 9.93 481 556 9238 712 0.984 20.9
8.0 60.3 76.8 7455 9.86 596 694 11525 880 0.979 16.6
10.0 74.5 94.9 9055 9.77 724 851 14106 1065 0.974 13.4
12.5 91.9 117 10915 9.66 873 1037 17164 1279 0.968 10.9
16.0 115 147 13267 9.50 1061 1280 21138 1546 0.959 8.67
▲ SAW process
Non-regular production †† Hot formed from seamless hollow Continued...
78 79
Y
300 x 300 6.3 57.8 73.6 10547 12.0 703 809 16136 1043 1.18 17.3
8.0 72.8 92.8 13128 11.9 875 1013 20194 1294 1.18 13.7
10.0 90.2 115 16026 11.8 1068 1246 24807 1575 1.17 11.1
12.5 112 142 19442 11.7 1296 1525 30333 1904 1.17 8.97
16.0 141 179 23850 11.5 1590 1895 37622 2325 1.16 7.12
350 x 350 8.0 85.4 109 21129 13.9 1207 1392 32384 1789 1.38 11.7
10.0 106 135 25884 13.9 1479 1715 39886 2185 1.37 9.44
12.5 131 167 31541 13.7 1802 2107 48934 2654 1.37 7.62
16.0 166 211 38942 13.6 2225 2630 60990 3264 1.36 6.04
400 x 400 10.0 122 155 39128 15.9 1956 2260 60092 2895 1.57 8.22
12.5 151 192 47839 15.8 2392 2782 73906 3530 1.57 6.63
16.0 191 243 59344 15.6 2967 3484 92442 4362 1.56 5.24
20.0▲
▲ 235 300 71535 15.4 3577 4247 112489 5237 1.55 4.25
▲ SAW process
Non-regular production †† Hot formed from seamless hollow
80 81
Y
350 x 350 19.0 190 242 43360 13.4 2478 2967 70930 3738 1.33 5.26 8–15
22.0 217 276 48360 13.2 2763 3343 80180 4178 1.32 4.61 8–15
25.0 ▲ 242 309 52890 13.1 3022 3695 88880 4581 1.31 4.12 7–12
400 x 400 22.0 251 320 74710 15.3 3735 4476 122400 5637 1.52 3.98 8–15
25.0 282 359 82150 15.1 4108 4967 136100 6210 1.51 3.55 7–12
450 x 450 12.0 162 207 65430 17.8 2908 3371 102400 4367 1.76 6.17 8–15
16.0 213 271 84070 17.6 3736 4376 133500 5617 1.75 4.70 8–15
19.0 250 318 97060 17.5 4314 5092 155800 6492 1.73 4.00 8–15
22.0 286 364 109200 17.3 4854 5775 177200 7315 1.72 3.50 8–15
25.0 ▲ 321 409 120600 17.2 5359 6427 197700 8088 1.71 3.12 7–13
28.0 ▲ 355 452 131200 17.0 5830 7047 217300 8813 1.70 2.82 7–13
32.0 ▲ 399 509 144100 16.8 6404 7826 242000 9707 1.69 2.50 7–13
500 x 500 12.0 181 231 90750 19.8 3630 4196 141500 5449 1.96 5.53 8–15
16.0 238 303 117100 19.6 4682 5461 184800 7035 1.95 4.20 8–15
19.0 280 356 135500 19.5 5422 6368 216100 8153 1.93 3.58 8–15
22.0 320 408 153000 19.4 6120 7239 246200 9213 1.92 3.12 8–15
25.0 360 459 169400 19.2 6778 8074 275300 10220 1.91 2.78 7–13
28.0 ▲ 399 508 184900 19.1 7396 8874 303300 11160 1.90 2.51 7–13
32.0 ▲ 450 573 204000 18.9 8161 9886 338900 12340 1.89 2.22 7–13
36.0 ▲ 498 635 221500 18.7 8860 10840 372500 13430 1.88 2.01 7–13
550 x 550 16.0 263 335 157700 21.7 5734 6666 247900 8613 2.15 3.80 8–15
19.0 309 394 183000 21.5 6656 7787 290200 10000 2.13 3.23 8–15
22.0 355 452 207100 21.4 7532 8868 331300 11330 2.12 2.82 8–15
25.0 ▲ 399 509 230000 21.3 8362 9909 371000 12590 2.11 2.50 7–13
28.0 ▲ 443 564 251600 21.1 9149 10910 409400 13790 2.10 2.26 7–13
32.0 ▲ 500 637 278600 20.9 10130 12190 458600 15300 2.09 2.00 7–13
36.0 ▲ 555 707 303500 20.7 11040 13400 505400 16700 2.08 1.80 7–13
40.0 ▲ 608 775 326500 20.5 11870 14540 549800 18000 2.06 1.64 7–13
600 x 600 * 25.0 ▲ 439 559 303400 23.3 10110 11930 486600 15220 2.31 2.28 7–13
28.0 ▲ 487 620 332700 23.2 11090 13160 537700 16700 2.30 2.05 7–13
32.0 ▲ 550 701 369400 23.0 12310 14730 603400 18570 2.29 1.82 7–13
36.0 ▲ 611 779 403700 22.8 13460 16220 666400 20330 2.28 1.64 7–13
40.0 ▲ 671 855 435500 22.6 14520 17640 726400 21970 2.26 1.49 7–13
700 x 700 * 25.0 ▲ 517 659 494100 27.4 14110 16540 784900 21220 2.71 1.93 7–13
28.0 ▲ 575 732 543500 27.2 15530 18280 869200 23360 2.70 1.74 7–13
32.0 ▲ 651 829 606200 27.0 17320 20530 978300 26080 2.69 1.54 7–13
36.0 ▲ 724 923 665400 26.9 19010 22690 1083700 28660 2.68 1.38 7–13
40.0 ▲ 797 1015 721200 26.7 20600 24760 1185200 31110 2.66 1.26 7–13
800 x 800 * 25.0 ▲ 596 759 751473 31.5 18787 21895 1185200 28224 3.11 1.68 7–13
28.0 ▲ 663 844 828537 31.3 20713 24245 1314593 31135 3.10 1.51 7–13
32.0 ▲ 751 957 927137 31.1 23178 27289 1482801 34868 3.09 1.33 7–13
36.0 ▲ 837 1067 1021072 30.9 25527 30230 1646062 38436 3.08 1.19 7–13
40.0 ▲ 922 1175 1110434 30.7 27761 33071 1804359 41843 3.06 1.08 7–13
45.0 ▲ 1026 1307 1215843 30.5 30396 36480 1995219 45881 3.05 0.975 7–13
50.0 ▲ 1127 1436 1314421 30.3 32861 39735 2178258 49680 3.03 0.887 7–13
60.0 ▲ 1321 1683 1491769 29.8 37294 45788 2520720 56592 2.99 0.757 7–13
50 x 30 3.2 3.61 4.60 14.2 6.20 1.76 1.16 5.68 4.13 7.25 5.00 14.2 6.80 0.152 277
60 x 40 3.0 4.35 5.54 26.5 13.9 2.18 1.58 8.82 6.95 10.9 8.19 29.2 11.2 0.192 230
4.0 5.64 7.19 32.8 17.0 2.14 1.54 10.9 8.52 13.8 10.3 36.7 13.7 0.190 177
5.0 6.85 8.73 38.1 19.5 2.09 1.50 12.7 9.77 16.4 12.2 43.0 15.7 0.187 146
80 x 40 3.2 5.62 7.16 57.2 18.9 2.83 1.63 14.3 9.46 18.0 11.0 46.2 16.1 0.232 178
4.0 6.90 8.79 68.2 22.2 2.79 1.59 17.1 11.1 21.8 13.2 55.2 18.9 0.230 145
5.0 8.42 10.7 80.3 25.7 2.74 1.55 20.1 12.9 26.1 15.7 65.1 21.9 0.227 119
6.3 10.3 13.1 93.3 29.2 2.67 1.49 23.3 14.6 31.1 18.4 75.6 24.8 0.224 97.2
8.0 12.5 16.0 106 32.1 2.58 1.42 26.5 16.1 36.5 21.2 85.8 27.4 0.219 79.9
90 x 50 3.6 7.40 9.42 98.3 38.7 3.23 2.03 21.8 15.5 27.2 18.0 89.4 25.9 0.271 135
5.0 9.99 12.7 127 49.2 3.16 1.97 28.3 19.7 36.0 23.5 116 32.9 0.267 100
6.3 12.3 15.6 150 57.0 3.10 1.91 33.3 22.8 43.2 28.0 138 38.1 0.264 81.5
100 x 50 3.0 6.71 8.54 110 36.8 3.58 2.08 21.9 14.7 27.3 16.8 88.4 25.0 0.292 149
3.2 7.13 9.08 116 38.8 3.57 2.07 23.2 15.5 28.9 17.7 93.4 26.4 0.929 140
4.0 8.78 11.2 140 46.2 3.53 2.03 27.9 18.5 35.2 21.5 113 31.4 0.290 114
5.0 10.8 13.7 167 54.3 3.48 1.99 33.3 21.7 42.6 25.8 135 36.9 0.287 92.8
6.3 13.3 16.9 197 63.0 3.42 1.93 39.4 25.2 51.3 30.8 160 42.9 0.284 75.4
8.0 16.3 20.8 230 71.7 3.33 1.86 46.0 28.7 61.4 36.3 186 48.9 0.279 61.4
100 x 60 3.6 8.53 10.9 145 64.8 3.65 2.44 28.9 21.6 35.6 24.9 142 35.6 0.311 117
5.0 11.6 14.7 189 83.6 3.58 2.38 37.8 27.9 47.4 32.9 188 45.9 0.307 86.5
6.3 14.2 18.1 225 98.1 3.52 2.33 45.0 32.7 57.3 39.5 224 53.8 0.304 70.2
8.0 17.5 22.4 264 113 3.44 2.25 52.8 37.8 68.7 47.1 265 62.2 0.299 57.0
120 x 60 3.6 9.66 12.3 227 76.3 4.30 2.49 37.9 25.4 47.2 28.9 183 43.3 0.351 103
5.0 13.1 16.7 299 98.8 4.23 2.43 49.9 32.9 63.1 38.4 242 56.0 0.347 76.1
6.3 16.2 20.7 358 116 4.16 2.37 59.7 38.8 76.7 46.3 290 65.9 0.344 61.6
8.0 20.1 25.6 425 135 4.08 2.30 70.8 45.0 92.7 55.4 344 76.6 0.339 49.9
120 x 80 5.0 14.7 18.7 365 193 4.42 3.21 60.9 48.2 74.6 56.1 401 77.9 0.387 68.0
6.3 18.2 23.2 440 230 4.36 3.15 73.3 57.6 91.0 68.2 487 92.9 0.384 54.9
8.0 22.6 28.8 525 273 4.27 3.08 87.5 68.1 111 82.6 587 110 0.379 44.3
10.0 27.4 34.9 609 313 4.18 2.99 101.6 78.1 131 97.3 688 126 0.374 36.5
150 x 100 5.0 18.6 23.7 739 392 5.58 4.07 98.5 78.5 119 90.1 807 127 0.487 53.7
6.3 23.1 29.5 898 474 5.52 4.01 120 94.8 147 110 986 153 0.484 43.2
8.0 28.9 36.8 1087 569 5.44 3.94 145 114 180 135 1203 183 0.479 34.7
10.0 35.3 44.9 1282 665 5.34 3.85 171 133 216 161 1432 214 0.474 28.4
12.5 42.8 54.6 1488 763 5.22 3.74 198 153 256 190 1679 246 0.468 23.3
160 x 80 4.0 14.4 18.4 612 207 5.77 3.35 76.5 51.7 94.7 58.3 493 88.1 0.470 69.3
5.0 17.8 22.7 744 249 5.72 3.31 93.0 62.3 116 71.1 600 106 0.467 56.0
6.3 22.2 28.2 903 299 5.66 3.26 113 74.8 142 86.8 730 127 0.464 45.1
8.0 27.6 35.2 1091 356 5.57 3.18 136 89.0 175 106 883 151 0.459 36.2
10.0 33.7 42.9 1284 411 5.47 3.10 161 103 209 125 1041 175 0.454 29.7
200 x 100 5.0 22.6 28.7 1495 505 7.21 4.19 149 101 185 114 1204 172 0.587 44.3
6.3 28.1 35.8 1829 613 7.15 4.14 183 123 228 140 1475 208 0.584 35.6
8.0 35.1 44.8 2234 739 7.06 4.06 223 148 282 172 1804 251 0.579 28.5
10.0 43.1 54.9 2664 869 6.96 3.98 266 174 341 206 2156 295 0.574 23.2
12.5 52.7 67.1 3136 1004 6.84 3.87 314 201 408 245 2541 341 0.568 19.0
200 x 120 5.0 24.1 30.7 1685 762 7.40 4.98 168 127 205 144 1648 210 0.627 41.5
6.3 30.1 38.3 2065 929 7.34 4.92 207 155 253 177 2028 255 0.624 33.3
8.0 37.6 48.0 2529 1128 7.26 4.85 253 188 313 218 2495 310 0.619 26.6
10.0 46.3 58.9 3026 1337 7.17 4.76 303 223 379 263 3001 367 0.614 21.6
200 x 150 8.0 41.4 52.8 2971 1894 7.50 5.99 297 253 359 294 3643 398 0.679 24.1
10.0 51.0 64.9 3568 2264 7.41 5.91 357 302 436 356 4409 475 0.674 19.6
250 x 100 10.0 51.0 64.9 4733 1072 8.54 4.06 379 214 491 251 2908 376 0.674 19.6
12.5 62.5 79.6 5622 1245 8.41 3.96 450 249 592 299 3436 438 0.668 16.0
250 x 150 5.0 30.4 38.7 3360 1527 9.31 6.28 269 204 324 228 3278 337 0.787 32.9
6.3 38.0 48.4 4143 1874 9.25 6.22 331 250 402 283 4054 413 0.784 26.3
8.0 47.7 60.8 5111 2298 9.17 6.15 409 306 501 350 5021 506 0.779 21.0
10.0 58.8 74.9 6174 2755 9.08 6.06 494 367 611 426 6090 605 0.774 17.0
12.5 72.3 92.1 7387 3265 8.96 5.96 591 435 740 514 7326 717 0.768 13.8
16.0 90.3 115 8879 3873 8.79 5.80 710 516 906 625 8868 849 0.759 11.1
300 x 100 8.0 47.7 60.8 6305 1078 10.2 4.21 420 216 546 245 3069 387 0.779 21.0
10.0 58.8 74.9 7613 1275 10.1 4.13 508 255 666 296 3676 458 0.774 17.0
300 x 200 6.3 47.9 61.0 7829 4193 11.3 8.29 522 419 624 472 8476 681 0.984 20.9
8.0 60.3 76.8 9717 5184 11.3 8.22 648 518 779 589 10562 840 0.979 16.6
10.0 74.5 94.9 11819 6278 11.2 8.13 788 628 956 721 12908 1015 0.974 13.4
12.5 91.9 117 14273 7537 11.0 8.02 952 754 1165 877 15677 1217 0.968 10.9
16.0 115 147 17390 9109 10.9 7.87 1159 911 1441 1080 19252 1468 0.959 8.67
400 x 200 8.0 72.8 92.8 19562 6660 14.5 8.47 978 666 1203 743 15735 1135 1.18 13.7
10.0 90.2 115 23914 8084 14.4 8.39 1196 808 1480 911 19259 1376 1.17 11.1
12.5 112 142 29063 9738 14.3 8.28 1453 974 1813 1111 23438 1656 1.17 8.97
16.0 141 179 35738 11824 14.1 8.13 1787 1182 2256 1374 28871 2010 1.16 7.12
450 x 250 8.0 85.4 109 30082 12142 16.6 10.6 1337 971 1622 1081 27083 1629 1.38 11.7
10.0 106 135 36895 14819 16.5 10.5 1640 1185 2000 1331 33284 1986 1.37 9.44
12.5 131 167 45026 17973 16.4 10.4 2001 1438 2458 1631 40719 2406 1.37 7.62
16.0 166 211 55705 22041 16.2 10.2 2476 1763 3070 2029 50545 2947 1.36 6.04
500 x 300 8.0 97.9 125 43728 19951 18.7 12.6 1749 1330 2100 1480 42563 2203 1.58 10.2
10.0 122 155 53762 24439 18.6 12.6 2150 1629 2595 1826 52450 2696 1.57 8.22
12.5 151 192 65813 29780 18.5 12.5 2633 1985 3196 2244 64389 3281 1.57 6.63
16.0 191 243 81783 36768 18.3 12.3 3271 2451 4005 2804 80329 4044 1.56 5.24
20.0▲▲ 235 300 98777 44078 18.2 12.1 3951 2939 4885 3408 97447 4842 1.55 4.25
▲ SAW process
Non-regular production
90 91
5.7 Celsius® hot finished structural hollow sections
92 93
5.7 Celsius® hot finished structural hollow sections
Designation
Celsius® 355 Ovals are designated by their outside dimensions and
thickness in millimetres followed by
their product standard and the material grade.
Examples:
Celsius® 355 Ovals 400 x 200 x 10.0 EN 10210 S355J2H
Dimensional tolerances
Length +150mm-0
94 95
B
Y
5.7 Celsius® hot finished structural hollow sections X X
H
T
Y
Celsius® 355 EN 10210 S355J2H
Hot finished oval hollow sections
Size Thickness Mass Area Moment Radius Elastic Plastic Torsional Torsional Superficial Approx.
of of Modulus Modulus Constant Constant Area Length
Inertia Gyration /tonne
150 x 75 3.2 8.63 11.0 245 83.1 4.73 2.75 32.7 22.2 45.5 28.0 249 49.7 0.364 116
3.6 9.67 12.3 273 92.2 4.71 2.74 36.5 24.6 50.8 31.2 276 55.0 0.364 103
4.0 10.7 13.6 301 101 4.70 2.72 40.1 26.9 56.1 34.4 303 60.1 0.364 93.4
5.0 13.3 16.9 367 122 4.66 2.69 48.9 32.5 68.9 42.0 367 72.2 0.364 75.4
6.3 16.5 21.0 448 147 4.62 2.64 59.7 39.1 84.9 51.5 443 86.3 0.364 60.6
200 x 100 5.0 17.9 22.8 897 302 6.27 3.64 89.7 60.4 125 76.8 905 135 0.485 55.9
6.3 22.3 28.4 1103 368 6.23 3.60 110 73.5 155 94.7 1105 163 0.485 44.8
8.0 28.0 35.7 1358 446 6.17 3.54 136 89.3 193 117 1347 197 0.485 35.7
10.0 34.5 44.0 1637 529 6.10 3.47 164 106 235 141 1605 232 0.485 29.0
12.5 42.4 54.0 1954 619 6.02 3.39 195 124 284 169 1889 269 0.485 23.6
250 x 125 5.0 22.5 28.7 1784 605 7.89 4.59 143 96.8 198 122 1809 217 0.606 44.4
6.3 28.2 35.9 2205 742 7.84 4.55 176 119 246 151 2224 265 0.606 35.5
8.0 35.4 45.1 2732 909 7.78 4.49 219 145 307 188 2734 323 0.606 28.2
10.0 43.8 55.8 3316 1090 7.71 4.42 265 174 376 228 3288 385 0.606 22.8
12.5 53.9 68.7 3996 1292 7.63 4.34 320 207 458 276 3918 453 0.606 18.5
300 x 150 5.0 27.1 34.6 3120 1064 9.50 5.55 208 142 288 178 3177 319 0.727 36.9
6.3 34.0 43.3 3869 1311 9.45 5.50 258 175 358 221 3921 392 0.727 29.4
8.0 42.8 54.5 4813 1616 9.39 5.44 321 215 449 275 4846 481 0.727 23.4
10.0 53.0 67.5 5872 1950 9.32 5.37 391 260 551 336 5867 577 0.727 18.9
12.5 65.5 83.4 7120 2334 9.24 5.29 475 311 674 409 7047 686 0.727 15.3
16.0 82.5 105 8731 2809 9.12 5.17 582 374 837 503 8529 818 0.727 12.1
400 x 200 5.0 36.4 46.3 7507 2577 12.7 7.46 375 258 517 320 7681 582 0.969 27.5
6.3 45.6 58.1 9349 3193 12.7 7.41 467 319 646 399 9529 719 0.969 21.9
8.0 57.6 73.4 11689 3966 12.6 7.35 584 397 811 500 11858 890 0.969 17.4
10.0 71.5 91.1 14348 4829 12.5 7.28 717 483 1001 615 14473 1079 0.969 14.0
12.5 88.6 113 17531 5843 12.5 7.19 877 584 1232 753 17558 1299 0.969 11.3
16.0 112 143 21734 7143 12.3 7.07 1087 714 1541 936 21551 1577 0.969 8.92
500 x 250 6.3 57.3 73.0 18468 6339 15.9 9.32 739 507 1017 630 18894 1146 1.21 17.5
8.0 72.4 92.2 23165 7908 15.8 9.26 927 633 1281 791 23606 1425 1.21 13.8
10.0 90.0 115 28539 9682 15.8 9.19 1142 775 1585 976 28950 1739 1.21 11.1
12.5 112 142 35030 11791 15.7 9.10 1401 943 1956 1201 35333 2108 1.21 8.95
16.0 142 180 43709 14549 15.6 8.98 1748 1164 2459 1501 43737 2586 1.21 7.06
96 97
5.8 Cold formed hollow sections - Strongbox® 235
Strongbox® 235
Multipurpose 235 MPa strength hollow sections
in sizes up to 139.7 dia, 150 square and 200 x 100 rectangles.
These sections are designed to provide strength combined with a
capacity to be manipulated, as well as good weldability and the
possibility, if required, of responding well to hot dip galvanising -
see pages 88 to 101.
Yield strength
Rm minimum
MPa
235
Designation
Strongbox® 235 cold formed hollow sections are designated by their
product name, outside dimensions and thicknesses in millimetres.
Examples:
a) Strongbox® 235 - 114.3 x 5.0
b) Strongbox® 235 - 100 x 50 x 4.0
98 99
5.8 Cold formed hollow sections - Strongbox® 235
Dimensional tolerances
100 101
5.8 Cold formed hollow sections - Strongbox® 235
Strongbox® 235
Strongbox® 235 Standard mill Special mill lengths
lengths metres metres
Size Thickness *
mm
T
Y
Strongbox® 235
Circular hollow sections
Outside Thickness Mass Area Moment Radius Elastic Plastic Torsional Torsional Superficial Approx.
Diameter of of Modulus Modulus Constant Constant Area Length/
Inertia Gyration Tonne
D T M A I i Wel Wpl It Ct As
mm mm kg/m cm2 cm4 cm cm3 cm3 cm4 cm3 m2/m m
26.9 2.0 1.23 1.42 1.12 0.890 0.835 1.14 2.25 1.67 0.085 814
2.5 1.50 1.74 1.33 0.875 0.99 1.37 2.67 1.98 0.085 665
3.0 1.77 2.05 1.52 0.861 1.13 1.59 3.04 2.26 0.085 566
33.7 2.0 1.56 1.80 2.30 1.13 1.37 1.83 4.60 2.73 0.106 640
2.5 1.92 2.22 2.76 1.11 1.64 2.23 5.53 3.28 0.106 520
3.0 2.27 2.63 3.18 1.10 1.89 2.60 6.37 3.78 0.106 440
4.0 2.93 3.40 3.91 1.07 2.32 3.28 7.82 4.64 0.106 341
42.4 2.5 2.46 2.84 5.74 1.42 2.71 3.63 11.5 5.41 0.133 407
3.0 2.91 3.37 6.66 1.41 3.14 4.26 13.3 6.29 0.133 343
3.5 3.36 3.88 7.53 1.39 3.55 4.86 15.1 7.10 0.133 298
4.0 3.79 4.39 8.33 1.38 3.93 5.44 16.7 7.86 0.133 264
48.3 2.5 2.82 3.26 8.65 1.63 3.58 4.78 17.3 7.16 0.152 354
3.0 3.35 3.87 10.1 1.62 4.18 5.62 20.2 8.36 0.152 298
3.5 3.87 4.47 11.4 1.60 4.74 6.43 22.9 9.47 0.152 259
4.0 4.37 5.06 12.7 1.59 5.26 7.21 25.4 10.5 0.152 229
60.3 3.0 4.24 4.89 20.3 2.04 6.74 8.96 40.6 13.5 0.189 236
3.5 4.90 5.66 23.2 2.02 7.68 10.3 46.3 15.4 0.189 204
4.0 5.55 6.41 25.9 2.01 8.58 11.6 51.7 17.2 0.189 180
76.1 2.5 4.54 5.22 35.6 2.61 9.36 12.3 71.2 18.7 0.239 220
3.0 5.41 6.23 42.0 2.60 11.0 14.6 84.0 22.1 0.239 185
3.5 6.27 7.22 48.1 2.58 12.6 16.8 96.2 25.3 0.239 160
4.0 7.11 8.20 54.0 2.57 14.2 18.9 108 28.4 0.239 141
88.9 3.0 6.36 7.31 68.0 3.05 15.3 20.1 136 30.6 0.279 157
4.0 8.38 9.65 87.9 3.02 19.8 26.2 176 39.5 0.279 119
5.0 10.3 11.9 107 2.99 24.0 32.1 213 47.9 0.279 222
114.3 3.0 8.23 9.47 147 3.95 25.8 33.6 295 51.6 0.359 121
3.5 9.56 11.0 170 3.93 29.7 38.9 340 59.5 0.359 105
5.0 13.5 15.5 234 3.89 41.0 54.3 469 82.0 0.359 74.2
6.0 16.0 18.8 279 3.85 48.8 65.2 558 97.6 0.359 62.4
139.7 5.0 16.6 19.1 437 4.78 62.6 82.3 874 125 0.439 60.2
6.0 19.8 23.2 523 4.75 74.9 99.1 1046 150 0.439 50.5
104 105
Y
25 x 25 2.0 1.36 1.57 1.36 0.931 1.09 1.33 2.33 1.67 0.093 733
2.5 1.64 1.89 1.55 0.908 1.24 1.56 2.75 1.94 0.091 610
3.0 1.89 2.18 1.70 0.884 1.36 1.75 3.11 2.15 0.090 529
30 x 30 2.0 1.68 1.93 2.48 1.14 1.66 2.00 4.17 2.54 0.113 569
2.5 2.03 2.34 2.89 1.11 1.93 2.37 4.99 2.98 0.111 492
3.0 2.36 2.72 3.22 1.09 2.15 2.70 5.71 3.35 0.110 423
40 x 40 2.0 2.31 2.65 6.31 1.54 3.16 3.74 10.3 4.80 0.153 434
2.5 2.82 3.24 7.49 1.52 3.74 4.50 12.5 5.73 0.151 355
3.0 3.30 3.80 8.52 1.50 4.26 5.20 14.5 6.56 0.150 303
4.0 4.20 4.83 10.2 1.45 5.09 6.39 18.0 7.93 0.146 238
50 x 50 2.0 2.93 3.37 12.8 1.95 5.13 6.02 20.6 7.78 0.193 341
2.5 3.60 4.14 15.4 1.93 6.16 7.31 25.2 9.38 0.191 278
3.0 4.25 4.88 17.7 1.91 7.10 8.51 29.4 10.8 0.190 236
4.0 5.45 6.27 21.7 1.86 8.69 10.7 37.3 13.4 0.186 183
5.0 6.56 7.55 24.9 1.82 9.95 12.5 44.0 15.5 0.183 152
60 x 60 2.0 3.56 4.09 22.8 2.36 7.59 8.84 36.2 11.5 0.233 281
2.5 4.39 5.04 27.5 2.34 9.18 10.79 44.3 13.9 0.231 228
3.0 5.19 5.96 31.9 2.32 10.6 12.6 52.2 16.2 0.230 193
4.0 6.71 7.71 39.7 2.27 13.2 16.0 66.7 20.3 0.226 149
5.0 8.13 9.35 46.3 2.22 15.4 19.0 79.8 23.8 0.223 123
70 x 70 2.5 5.17 5.94 44.8 2.75 12.8 14.9 71.4 19.4 0.271 193
3.0 6.13 7.04 52.2 2.72 14.9 17.6 84.3 22.6 0.270 163
3.5 7.06 8.11 59.2 2.70 16.9 20.1 96.6 25.7 0.268 142
4.0 7.97 9.15 65.7 2.68 18.8 22.4 109 28.6 0.266 126
5.0 9.70 11.1 77.3 2.63 22.1 26.8 131 33.9 0.263 103
80 x 80 3.0 7.07 8.12 79.7 3.13 19.9 23.3 127 30.2 0.310 141
3.5 8.16 9.37 90.6 3.11 22.7 26.7 146 34.4 0.308 123
4.0 9.22 10.6 101 3.09 25.2 29.9 165 38.4 0.306 108
5.0 11.3 12.9 120 3.04 30.0 36.0 200 45.8 0.303 88.7
6.0 13.2 15.5 139 2.99 34.6 42.3 235 53.2 0.299 75.7
90 x 90 3.0 8.01 8.7 221 3.44 49.0 58.9 345 70.8 0.350 125
3.5 9.26 10.6 132 3.52 29.2 34.3 211 44.3 0.348 108
5.0 12.8 14.7 176 3.45 39.0 46.6 289 59.5 0.343 77.9
6.0 15.1 17.7 204 3.40 45.4 54.9 343 69.5 0.339 66.2
100 x 100 3.0 8.96 10.3 160 3.95 32.1 37.2 253 48.4 0.390 111.7
4.0 11.7 13.5 205 3.90 41.1 48.2 330 62.3 0.386 85.2
5.0 14.4 16.5 246 3.86 49.3 58.5 402 75.0 0.383 69.4
6.0 17.0 19.9 289 3.81 57.7 69.2 478 88.0 0.379 58.9
8.0 21.4 25.6 346 3.68 69.3 85.8 613 109 0.366 46.8
120 x 120 4.0 14.2 16.3 364 4.72 60.7 70.8 579 91.9 0.466 70.2
5.0 17.5 20.1 441 4.68 73.4 86.3 709 111 0.463 57.0
6.0 20.7 24.3 520 4.63 86.6 103 848 132 0.459 48.2
8.0 26.4 31.6 639 4.50 107 130 1104 166 0.446 37.9
150 x 150 4.0 18.0 20.7 731 5.95 97.5 113 1147 147 0.586 55.5
5.0 22.3 25.5 890 5.90 119 138 1413 179 0.583 44.9
6.0 26.4 30.9 1058 5.85 141 166 1697 213 0.579 37.9
8.0 33.9 40.6 1332 5.73 178 212 2239 275 0.566 29.5
50 x 25 2.0 2.15 2.47 7.61 2.57 1.76 1.02 3.04 2.06 3.85 2.38 6.48 3.61 0.143 465
2.5 2.62 3.01 8.99 3.01 1.73 1.00 3.60 2.41 4.62 2.84 7.77 4.27 0.141 382
3.0 3.07 3.53 10.2 3.39 1.70 0.98 4.07 2.71 5.31 3.25 8.93 4.83 0.140 326
50 x 30 2.0 2.31 2.65 8.65 3.92 1.81 1.22 3.46 2.61 4.29 3.02 8.94 4.44 0.153 434
2.5 2.82 3.24 10.3 4.63 1.78 1.20 4.11 3.08 5.16 3.62 10.8 5.28 0.151 355
3.0 3.30 3.80 11.7 5.24 1.75 1.17 4.68 3.49 5.95 4.17 12.5 6.03 0.150 303
4.0 4.20 4.83 14.0 6.20 1.70 1.13 5.58 4.14 7.31 5.11 15.4 7.24 0.146 238
60 x 40 2.5 3.60 4.14 20.0 10.7 2.20 1.61 6.68 5.35 8.19 6.20 23.0 8.93 0.191 278
3.0 4.25 4.88 23.1 12.3 2.18 1.59 7.69 6.14 9.53 7.21 26.9 10.3 0.190 236
4.0 5.45 6.27 28.3 15.0 2.12 1.55 9.42 7.48 11.9 9.01 33.9 12.7 0.186 183
80 x 40 3.0 5.19 5.96 47.4 16.1 2.82 1.64 11.8 8.03 14.9 9.22 40.2 14.1 0.230 193
4.0 6.71 7.71 58.9 19.8 2.76 1.60 14.7 9.88 18.9 11.6 50.9 17.5 0.226 149
90 x 50 3.0 6.13 7.04 74.2 29.8 3.25 2.06 16.5 11.9 20.4 13.6 70.0 20.5 0.270 163
3.5 7.06 8.11 84.0 33.7 3.22 2.04 18.7 13.5 23.3 15.5 80.1 23.2 0.268 142
4.0 7.97 11.4 114 44.8 3.17 1.98 25.3 17.9 32.2 21.2 107 30.5 0.266 126
5.0 9.70 11.1 110 43.6 3.14 1.98 24.4 17.4 31.2 20.7 107 30.4 0.263 103
100 x 50 3.0 6.60 7.58 96.4 32.9 3.57 2.08 19.3 13.1 24.1 14.9 80.8 22.9 0.290 152
4.0 8.59 9.87 122 41.1 3.51 2.04 24.3 16.5 30.8 19.0 104 28.9 0.286 116
5.0 10.5 12.0 144 48.2 3.46 2.00 28.8 19.3 37.0 22.7 124 34.1 0.283 95.4
6.0 12.3 14.4 166 55.0 3.40 1.96 33.1 22.0 43.3 26.5 145 39.1 0.279 81.5
100 x 60 3.0 7.07 8.12 109 49.7 3.67 2.47 21.8 16.6 26.7 18.8 111 28.0 0.310 141
3.5 8.16 9.37 124 56.4 3.64 2.45 24.8 18.8 30.6 21.5 127 31.9 0.308 123
4.0 9.22 10.6 138 62.7 3.62 2.43 27.7 20.9 34.3 24.1 143 35.6 0.306 108
5.0 11.3 12.9 164 74.0 3.56 2.39 32.9 24.7 41.3 29.0 173 42.3 0.303 88.7
6.0 13.2 15.5 190 85.1 3.51 2.35 38.0 28.4 48.5 33.9 203 48.9 0.299 75.7
120 x 60 3.0 8.01 9.20 171 58.6 4.31 2.52 28.5 19.5 35.4 21.9 142 33.9 0.350 125
3.5 9.26 10.6 195 66.6 4.29 2.50 32.5 22.2 40.6 25.1 163 38.7 0.348 108
4.0 10.5 12.0 218 74.1 4.26 2.48 36.3 24.7 45.6 28.2 184 43.2 0.346 95.4
5.0 12.8 14.7 260 87.9 4.20 2.44 43.4 29.3 55.1 34.0 222 51.5 0.343 77.9
6.0 15.1 17.7 303 102 4.14 2.40 50.5 33.8 65.0 39.9 262 59.8 0.339 66.2
120 x 80 4.0 11.7 13.5 267 143 4.45 3.26 44.5 35.8 54.0 40.9 302 59.4 0.386 85.2
5.0 14.4 16.5 320 171 4.40 3.22 53.4 42.8 65.5 49.6 368 71.4 0.383 69.4
6.0 17.0 19.9 375 200 4.35 3.17 62.6 49.9 77.6 58.7 436 83.6 0.379 58.9
8.0 21.4 25.6 449 239 4.19 3.06 74.9 59.7 95.9 72.6 556 103 0.366 46.8
150 x 100 4.0 14.9 17.1 538 289 5.61 4.11 71.7 57.8 86.4 65.5 602 95.7 0.486 67.2
5.0 18.3 21.0 652 349 5.56 4.07 86.9 69.8 105 79.9 737 116 0.483 54.5
6.0 21.7 25.4 770 411 5.51 4.03 103 82.3 126 95.2 880 137 0.479 46.1
8.0 27.7 33.1 950 507 5.36 3.92 127 101 159 120 1145 173 0.466 36.1
160 x 80 5.0 17.5 20.1 654 223 5.70 3.32 81.7 55.6 102 63.2 549 97.1 0.463 57.0
6.0 20.7 24.3 771 261 5.64 3.28 96.4 65.2 122 75.1 653 114 0.459 48.2
8.0 26.4 31.6 943 318 5.47 3.17 118 79.5 153 94.3 840 143 0.446 37.9
200 x 100 4.0 18.0 20.7 1084 373 7.24 4.25 108 74.5 134 82.9 895 129 0.586 55.5
5.0 22.3 25.5 1320 452 7.19 4.21 132 90.4 164 101 1099 157 0.583 44.9
6.0 26.4 30.9 1569 534 7.13 4.16 157 107 196 121 1314 186 0.579 37.9
8.0 33.9 40.6 1968 668 6.97 4.06 197 134 251 155 1718 237 0.566 29.5
Yield strength Tensile strength Elongation % Min Impact strength Chemical composition % max Carbon
ReH minimum Rm L0 = 5,65 √S0 10 x 10mm equivalent
MPa MPa Specimen (CEV) max
minimum
C Si Mn P S
T ≤ 16mm T<3 3mm ≤ T ≤ 40mm T ≤ 40mm ˚C J
355 510-680 490-630 20* -20 27 0.22 0.55 1.60 0.035 0.035 0.45
Designation
Hybox® 355 hollow sections are designated by their product name,
outside dimensions and thicknesses in millimetres.
Examples:
a) Hybox® 355 - 114.3 x 5.0 EN10219 S355J2H.
b) Hybox® 355 - 100 x 50 x 4.0 EN10219 S355J2H
114 115
5.9 Cold formed structural hollow sections -
Hybox® 355
Dimensional tolerances
Circular Square/Rectangular
Outside dimensions ±1% with a min. Side length (mm) Tolerance
(D, B and H) of ±0.50mm and a max. H,B < 100 ±1% with a min. of
of ±10mm ±0.5 mm
116 117
5.9 Cold formed structural hollow sections -
Hybox® 355
118 119
D
Y
5.9 Cold formed structural hollow sections -
X X
Hybox® 355
T
Y
Hybox 355 ®
Outside Thickness Mass Area Moment Radius Elastic Plastic Torsional Torsional Superficial Approx.
Diameter of of Modulus Modulus Constant Constant Area Length/
Inertia Gyration Tonne
D T M A I i Wel Wpl It Ct As
mm mm kg/m cm2 cm4 cm cm3 cm3 cm4 cm3 m2/m m
26.9 2.0 1.23 1.56 1.22 0.883 0.907 1.24 2.44 1.81 0.0845 814
2.5 1.50 1.92 1.44 0.867 1.07 1.49 2.88 2.14 0.0845 665
3.0 1.77 2.25 1.63 0.852 1.21 1.72 3.27 2.43 0.0845 566
33.7 2.5 1.92 2.45 3.00 1.11 1.78 2.44 6.00 3.56 0.106 520
3.0 2.27 2.89 3.44 1.09 2.04 2.84 6.88 4.08 0.106 440
42.4 2.5 2.46 3.13 6.26 1.41 2.95 3.99 12.5 5.91 0.133 407
3.0 2.91 3.71 7.25 1.40 3.42 4.67 14.5 6.84 0.133 343
48.3 2.5 2.82 3.60 9.46 1.62 3.92 5.25 18.9 7.83 0.152 354
3.0 3.35 4.27 11.0 1.61 4.55 6.17 22.0 9.11 0.152 298
3.5 3.87 4.93 12.4 1.59 5.15 7.04 24.9 10.3 0.152 259
4.0 4.37 5.57 13.8 1.57 5.70 7.87 27.5 11.4 0.152 229
60.3 3.0 4.24 5.40 22.2 2.03 7.37 9.86 44.4 14.7 0.189 236
3.5 4.90 6.25 25.3 2.01 8.4 11.3 50.6 16.8 0.189 204
4.0 5.55 7.07 28.2 2.00 9.34 12.7 56.3 18.7 0.189 180
76.1 2.5 4.54 5.78 39.2 2.60 10.3 13.5 78.4 20.6 0.239 220
3.0 5.41 6.89 46.1 2.59 12.1 16.0 92.2 24.2 0.239 185
4.0 7.11 9.06 59.1 2.55 15.5 20.8 118 31.0 0.239 141
88.9 3.0 6.36 8.10 74.8 3.04 16.8 22.1 150 33.6 0.279 157
3.5 7.37 9.39 85.7 3.02 19.3 25.5 171 38.6 0.279 136
4.0 8.38 10.7 96.3 3.00 21.7 28.9 193 43.3 0.279 119
5.0 10.3 13.2 116 2.97 26.2 35.2 233 52.4 0.279 96.7
114.3 3.0 8.23 10.5 163 3.94 28.4 37.2 325 56.9 0.359 121
3.5 9.56 12.2 187 3.92 32.7 43.0 374 65.5 0.359 105
4.0 10.9 13.9 211 3.90 36.9 48.7 422 73.9 0.359 91.9
5.0 13.5 17.2 257 3.87 45.0 59.8 514 89.9 0.359 74.2
6.0 16.0 20.4 300 3.83 52.5 70.4 600 105 0.359 62.4
139.7 4.0 13.4 17.1 393 4.80 56.2 73.7 786 112 0.439 74.7
5.0 16.6 21.2 481 4.77 68.8 90.8 961 138 0.439 60.2
6.0 19.8 25.2 564 4.73 80.8 107 1129 162 0.439 50.5
8.0 26.0 33.1 720 4.66 103 139 1441 206 0.439 38.5
10.0 32.0 40.7 862 4.60 123 169 1724 247 0.439 31.3
Continued...
120 121
D
Y
5.9 Cold formed structural hollow sections -
X X
Hybox® 355
T
Y
Hybox 355 ®
Outside Thickness Mass Area Moment Radius Elastic Plastic Torsional Torsional Superficial Approx.
Diameter of of Modulus Modulus Constant Constant Area Length/
Inertia Gyration Tonne
D T M A I i Wel Wpl It Ct As
mm mm kg/m cm2 cm4 cm cm3 cm3 cm4 cm3 m2/m m
168.3 4.0 16.2 20.6 697 5.81 82.8 108 1394 166 0.529 61.7
5.0 20.1 25.7 856 5.78 102 133 1712 203 0.529 49.7
6.0 24.0 30.6 1009 5.74 120 158 2017 240 0.529 41.6
8.0 31.6 40.3 1297 5.67 154 206 2595 308 0.529 31.6
10.0 39.0 49.7 1564 5.61 186 251 3128 372 0.529 25.6
12.5 48.0 61.2 1868 5.53 222 304 3737 444 0.529 20.8
193.7 4.0 18.7 23.8 1073 6.71 111 144 2146 222 0.609 53.4
4.5 21.0 26.7 1198 6.69 124 161 2395 247 0.609 47.6
5.0 23.3 29.6 1320 6.67 136 178 2640 273 0.609 43.0
6.0 27.8 35.4 1560 6.64 161 211 3119 322 0.609 36.0
8.0 36.6 46.7 2016 6.57 208 276 4031 416 0.609 27.3
10.0 45.3 57.7 2442 6.50 252 338 4883 504 0.609 22.1
12.5 55.9 71.2 2934 6.42 303 411 5869 606 0.609 17.9
219.1 4.5 23.8 30.3 1747 7.59 159 207 3494 319 0.688 42.0
5.0 26.4 33.6 1928 7.57 176 229 3856 352 0.688 37.9
6.0 31.5 40.2 2282 7.54 208 273 4564 417 0.688 31.7
8.0 41.6 53.1 2960 7.47 270 357 5919 540 0.688 24.0
10.0 51.6 65.7 3598 7.40 328 438 7197 657 0.688 19.4
12.0 61.3 78.1 4200 7.33 383 515 8400 767 0.688 16.3
12.5 63.7 81.1 4345 7.32 397 534 8689 793 0.688 15.7
16.0 80.1 102 5297 7.20 483 661 10590 967 0.688 12.5
244.5 5.0 29.5 37.6 2699 8.47 221 287 5397 441 0.768 33.9
6.0 35.3 45.0 3199 8.43 262 341 6397 523 0.768 28.3
8.0 46.7 59.4 4160 8.37 340 448 8321 681 0.768 21.4
10.0 57.8 73.7 5073 8.30 415 550 10150 830 0.768 17.3
12.0 68.8 87.7 5938 8.23 486 649 11880 972 0.768 14.5
12.5 71.5 91.1 6147 8.21 503 673 12290 1006 0.768 14.0
16.0 90.2 115 7533 8.10 616 837 15070 1232 0.768 11.1
273.0 5.0 33.0 42.1 3781 9.48 277 359 7562 554 0.858 30.3
6.0 39.5 50.3 4487 9.44 329 428 8974 657 0.858 25.3
8.0 52.3 66.6 5852 9.37 429 562 11703 857 0.858 19.1
10.0 64.9 82.6 7154 9.31 524 692 14308 1048 0.858 15.4
12.0 77.2 98.4 8396 9.24 615 818 16792 1230 0.858 12.9
12.5 80.3 102 8697 9.22 637 849 17395 1274 0.858 12.5
16.0 101 129 10707 9.10 784 1058 21414 1569 0.858 9.86
Continued...
122 123
D
Y
5.9 Cold formed structural hollow sections -
X X
Hybox® 355
T
Y
Hybox 355 ®
Outside Thickness Mass Area Moment Radius Elastic Plastic Torsional Torsional Superficial Approx.
Diameter of of Modulus Modulus Constant Constant Area Length/
Inertia Gyration Tonne
D T M A I i Wel Wpl It Ct As
mm mm kg/m cm2 cm4 cm cm3 cm3 cm4 cm3 m2/m m
323.9 5.0 39.3 50.1 6369 11.3 393 509 12739 787 1.02 25.4
6.0 47.0 59.9 7572 11.2 468 606 15145 935 1.02 21.3
8.0 62.3 79.4 9910 11.2 612 799 19820 1224 1.02 16.0
10.0 77.4 98.6 12158 11.1 751 986 24317 1501 1.02 12.9
12.0 92.3 118 14320 11.0 884 1168 28639 1768 1.02 10.8
12.5 96.0 122 14847 11.0 917 1213 29693 1833 1.02 10.4
16.0 121 155 18390 10.9 1136 1518 36780 2271 1.02 8.23
355.6 5.0 43.2 55.1 8464 12.4 476 615 16927 952 1.12 23.1
6.0 51.7 65.9 10071 12.4 566 733 20141 1133 1.12 19.3
8.0 68.6 87.4 13201 12.3 742 967 26403 1485 1.12 14.6
10.0 85.2 109 16223 12.2 912 1195 32447 1825 1.12 11.7
12.0 102 130 19139 12.2 1076 1417 38279 2153 1.12 9.83
12.5 106 135 19852 12.1 1117 1472 39704 2233 1.12 9.45
16.0 134 171 24663 12.0 1387 1847 49326 2774 1.12 7.46
406.4 6.0 59.2 75.5 15128 14.2 745 962 30257 1489 1.28 16.9
8.0 78.6 100 19874 14.1 978 1270 39748 1956 1.28 12.7
10.0 97.8 125 24476 14.0 1205 1572 48952 2409 1.28 10.2
12.0 117 149 28937 14.0 1424 1867 57874 2848 1.28 8.57
12.5 121 155 30031 13.9 1478 1940 60061 2956 1.28 8.2
16.0 154 196 37449 13.8 1843 2440 74898 3686 1.28 6.5
457.0 6.0 66.7 85 21618 15.9 946 1220 43236 1892 1.44 15.0
8.0 88.6 113 28446 15.9 1245 1613 56893 2490 1.44 11.3
10.0 110 140 35091 15.8 1536 1998 70183 3071 1.44 9.07
12.0 132 168 41556 15.7 1819 2377 83113 3637 1.44 7.59
12.5 137 175 43145 15.7 1888 2470 86290 3776 1.44 7.30
16.0 174 222 53959 15.6 2361 3113 107919 4723 1.44 5.75
508.0 6.0 74.3 95 29812 17.7 1174 1512 59623 2347 1.60 13.5
8.0 98.6 126 39280 17.7 1546 2000 78560 3093 1.60 10.1
10.0 123 156 48520 17.6 1910 2480 97040 3820 1.60 8.14
12.0 147 187 57536 17.5 2265 2953 115072 4530 1.60 6.81
12.5 153 195 59755 17.5 2353 3070 119511 4705 1.60 6.55
16.0 194 247 74909 17.4 2949 3874 149818 5898 1.60 5.15
124 125
Y
Hybox® 355
Square hollow sections
Size Thickness Mass Area Moment Radius Elastic Plastic Torsional Torsional Superficial Approx.
of of Modulus Modulus Constants Constants Area Length/
Inertia Gyration Tonne
25 x 25 2.0 1.36 1.74 1.48 0.924 1.19 1.47 2.53 1.80 0.093 733
2.5 1.64 2.09 1.69 0.899 1.35 1.71 2.97 2.07 0.091 610
3.0 1.89 2.41 1.84 0.874 1.47 1.91 3.33 2.27 0.090 529
30 x 30 2.0 1.68 2.14 2.72 1.13 1.81 2.21 4.54 2.75 0.113 596
2.5 2.03 2.59 3.16 1.10 2.10 2.61 5.40 3.20 0.111 492
3.0 2.36 3.01 3.50 1.08 2.34 2.96 6.15 3.58 0.110 423
40 x 40 2.0 2.31 2.94 6.94 1.54 3.47 4.13 11.3 5.23 0.153 434
2.5 2.82 3.59 8.22 1.51 4.11 4.97 13.6 6.21 0.151 355
3.0 3.30 4.21 9.32 1.49 4.66 5.72 15.8 7.07 0.150 303
4.0 4.20 5.35 11.1 1.44 5.54 7.01 19.4 8.48 0.146 238
50 x 50 2.0 2.93 3.74 14.1 1.95 5.66 6.66 22.6 8.51 0.193 341
2.5 3.60 4.59 16.9 1.92 6.78 8.07 27.5 10.2 0.191 278
3.0 4.25 5.41 19.5 1.90 7.79 9.39 32.1 11.8 0.190 236
4.0 5.45 6.95 23.7 1.85 9.49 11.70 40.4 14.4 0.186 183
5.0 6.56 8.36 27.0 1.80 10.8 13.7 47.5 16.6 0.183 152
60 x 60 3.0 5.19 6.61 35.1 2.31 11.7 14.0 57.1 17.7 0.230 193
4.0 6.71 8.55 43.6 2.26 14.5 17.6 72.6 22.0 0.226 149
5.0 8.13 10.4 50.5 2.21 16.8 20.9 86.4 25.6 0.223 123
70 x 70 2.5 5.17 6.59 49.4 2.74 14.1 16.5 78.5 21.2 0.271 193
3.0 6.13 7.81 57.5 2.71 16.4 19.4 92.4 24.7 0.270 163
3.5 7.06 8.99 65.1 2.69 18.6 22.2 106 28.0 0.268 142
4.0 7.97 10.1 72.1 2.67 20.6 24.8 119 31.1 0.266 126
5.0 9.70 12.4 84.6 2.62 24.2 29.6 142 36.7 0.263 103
80 x 80 3.0 7.07 9.0 87.8 3.12 22.0 25.8 140 33.0 0.310 141
3.5 8.16 10.4 99.8 3.10 25.0 29.5 161 37.6 0.308 123
4.0 9.22 11.7 111 3.07 27.8 33.1 180 41.8 0.306 108
5.0 11.3 14.4 131 3.03 32.9 39.7 218 49.7 0.303 88.7
6.0 13.2 16.8 149 2.98 37.3 45.8 252 56.6 0.299 75.7
Continued...
126 127
Y
Hybox® 355
Square hollow sections
Size Thickness Mass Area Moment Radius Elastic Plastic Torsional Torsional Superficial Approx.
of of Modulus Modulus Constants Constants Area Length/
Inertia Gyration Tonne
90 x 90 3.0 8.01 10.2 127 3.53 28.3 33.0 201 42.5 0.350 125
3.5 9.26 11.8 145 3.51 32.2 37.9 232 48.5 0.348 108
4.0 10.5 13.3 162 3.48 36.0 42.6 261 54.2 0.346 95.4
5.0 12.8 16.4 193 3.43 42.9 51.4 316 64.7 0.343 77.9
6.0 15.1 19.2 220 3.39 49.0 59.5 368 74.2 0.339 66.2
100 x 100 3.0 8.96 11.4 177 3.94 35.4 41.2 279 53.2 0.390 112
4.0 11.7 14.9 226 3.89 45.3 53.3 362 68.1 0.386 85.2
5.0 14.4 18.4 271 3.84 54.2 64.6 441 81.7 0.383 69.4
6.0 17.0 21.6 311 3.79 62.3 75.1 514 94.1 0.379 58.9
8.0 21.4 27.2 366 3.67 73.2 91.1 645 114.0 0.366 46.8
120 x 120 4.0 14.2 18.1 402 4.71 67.0 78.3 637 101 0.466 70.2
5.0 17.5 22.4 485 4.66 80.9 95.4 778 122 0.463 57.0
6.0 20.7 26.4 562 4.61 93.7 112 913 141 0.459 48.2
8.0 26.4 33.6 677 4.49 113 138 1163 175 0.446 37.9
10.0 31.8 40.6 777 4.38 129 162 1376 203 0.437 31.4
140 x 140 4.0 16.8 21.3 652 5.52 93.1 108 1023 140 0.546 59.7
5.0 20.7 26.4 791 5.48 113 132 1256 170 0.543 48.3
6.0 24.5 31.2 920 5.43 131 155 1479 198 0.539 40.8
8.0 31.4 40.0 1127 5.30 161 194 1901 248 0.526 31.8
10.0 38.1 48.6 1312 5.20 187 230 2274 291 0.517 26.2
150 x 150 4.0 18.0 22.9 808 5.93 108 125 1265 162 0.586 55.5
5.0 22.3 28.4 982 5.89 131 153 1554 197 0.583 44.9
6.0 26.4 33.6 1146 5.84 153 180 1833 230 0.579 37.9
8.0 33.9 43.2 1412 5.71 188 226 2364 289 0.566 29.5
10.0 41.3 52.6 1653 5.61 220 269 2839 341 0.557 24.2
160 x 160 4.0 19.3 24.5 987 6.34 123 143 1541 185 0.626 51.9
5.0 23.8 30.4 1202 6.29 150 175 1896 226 0.623 42.0
6.0 28.3 36.0 1405 6.25 176 206 2239 264 0.619 35.4
8.0 36.5 46.4 1741 6.12 218 260 2897 334 0.606 27.4
10.0 44.4 56.6 2048 6.02 256 311 3490 395 0.597 22.5
Continued...
128 129
Y
Hybox® 355
Square hollow sections
Size Thickness Mass Area Moment Radius Elastic Plastic Torsional Torsional Superficial Approx.
of of Modulus Modulus Constants Constants Area Length/
Inertia Gyration Tonne
180 x 180 5.0 27.0 34.4 1737 7.11 193 224 2724 290 0.703 37.1
6.0 32.1 40.8 2037 7.06 226 264 3223 340 0.699 31.2
8.0 41.5 52.8 2546 6.94 283 336 4189 432 0.686 24.1
10.0 50.7 64.6 3017 6.84 335 404 5074 515 0.677 19.7
12.0 58.5 74.5 3322 6.68 369 454 5865 584 0.658 17.1
12.5 60.5 77.0 3406 6.65 378 467 6050 600 0.656 16.5
200 x 200 5.0 30.1 38.4 2410 7.93 241 279 3763 362 0.783 33.2
6.0 35.8 45.6 2833 7.88 283 330 4459 426 0.779 27.9
8.0 46.5 59.2 3566 7.76 357 421 5815 544 0.766 21.5
10.0 57.0 72.6 4251 7.65 425 508 7072 651 0.757 17.6
12.0 66.0 84.1 4730 7.50 473 576 8230 743 0.738 15.2
12.5 68.3 87.0 4859 7.47 486 594 8502 765 0.736 14.6
250 x 250 6.0 45.2 57.6 5672 9.92 454 524 8843 681 0.979 22.1
8.0 59.1 75.2 7229 9.80 578 676 11598 878 0.966 16.9
10.0 72.7 92.6 8707 9.70 697 822 14197 1062 0.957 13.8
12.0 84.8 108 9859 9.55 789 944 16691 1226 0.938 11.8
12.5 88.0 112 10161 9.52 813 975 17283 1266 0.936 11.4
300 x 300 8.0 71.6 91.2 12801 11.8 853 991 20312 1293 1.17 14.0
10.0 88.4 113 15519 11.7 1035 1211 24966 1572 1.16 11.3
12.0 104 132 17767 11.6 1184 1402 29514 1829 1.138 9.65
12.5 108 137 18348 11.6 1223 1451 30601 1892 1.14 9.3
130 131
Y
Hybox® 355
Rectangular hollow sections
Size Thickness Mass Area Moment Radius Elastic Plastic Torsional Torsional Superficial Approx.
of of Modulus Modulus Constant Constant Area Length
Inertia Gyration /tonne
50 x 25 2.0 2.15 2.74 8.38 2.81 1.75 1.01 3.35 2.25 4.26 2.62 7.06 3.92 0.143 465
2.5 2.62 3.34 9.89 3.28 1.72 0.99 3.95 2.62 5.11 3.12 8.43 4.60 0.141 382
3.0 3.07 3.91 11.2 3.67 1.69 0.97 4.47 2.93 5.86 3.56 9.64 5.18 0.140 326
50 x 30 2.0 2.31 2.94 9.54 4.29 1.80 1.21 3.81 2.86 4.74 3.33 9.77 4.84 0.153 434
2.5 2.82 3.59 11.3 5.05 1.77 1.19 4.52 3.37 5.70 3.98 11.7 5.72 0.151 355
3.0 3.30 4.21 12.8 5.70 1.75 1.16 5.13 3.80 6.57 4.58 13.5 6.49 0.150 303
4.0 4.20 5.35 15.3 6.69 1.69 1.12 6.10 4.46 8.05 5.58 16.5 7.71 0.146 238
60 x 30 3.0 3.77 4.81 20.5 6.80 2.06 1.19 6.83 4.53 8.82 5.39 17.5 7.95 0.170 265
4.0 4.83 6.15 24.7 8.06 2.00 1.14 8.23 5.37 10.92 6.62 21.5 9.52 0.166 207
60 x 40 2.5 3.60 4.59 22.1 11.7 2.19 1.60 7.36 5.87 9.06 6.84 25.1 9.72 0.191 278
3.0 4.25 5.41 25.4 13.4 2.17 1.58 8.46 6.72 10.5 7.94 29.3 11.2 0.190 236
4.0 5.45 6.95 31.0 16.3 2.11 1.53 10.3 8.14 13.2 9.89 36.7 13.7 0.186 183
5.0 6.56 8.36 35.3 18.4 2.06 1.48 11.8 9.21 15.4 11.5 42.8 15.6 0.183 152
70 x 40 3.0 4.72 6.01 37.3 15.5 2.49 1.61 10.7 7.75 13.4 9.05 36.5 13.2 0.210 212
4.0 6.08 7.75 46.0 18.9 2.44 1.56 13.1 9.44 16.8 11.3 45.8 16.2 0.206 164
70 x 50 3.0 5.19 6.61 44.1 26.1 2.58 1.99 12.6 10.4 15.4 12.2 53.6 17.1 0.230 193
4.0 6.71 8.55 54.7 32.2 2.53 1.94 15.6 12.9 19.5 15.4 68.1 21.2 0.226 149
80 x 40 3.0 5.19 6.61 52.3 17.6 2.81 1.63 13.1 8.78 16.5 10.2 43.9 15.3 0.230 193
4.0 6.71 8.55 64.8 21.5 2.75 1.59 16.2 10.7 20.9 12.8 55.2 18.8 0.226 149
5.0 8.13 10.4 75.1 24.6 2.69 1.54 18.8 12.3 24.7 15.0 65.0 21.7 0.223 123
80 x 50 3.0 5.66 7.21 61.1 29.4 2.91 2.02 15.3 11.8 18.8 13.6 65.0 19.7 0.250 177
4.0 7.34 9.35 76.4 36.5 2.86 1.98 19.1 14.6 24.0 17.2 82.7 24.6 0.246 136
5.0 8.91 11.4 89.2 42.3 2.80 1.93 22.3 16.9 28.5 20.5 98.4 28.7 0.243 112
80 x 60 3.0 6.13 7.81 70.0 44.9 3.00 2.40 17.5 15.0 21.2 17.4 88.3 24.1 0.270 163
4.0 7.97 10.1 87.9 56.1 2.94 2.35 22.0 18.7 27.0 22.1 113 30.3 0.266 126
5.0 9.70 12.4 103 65.7 2.89 2.31 25.8 21.9 32.2 26.4 136 35.7 0.263 103
90 x 50 3.0 6.13 7.81 81.9 32.7 3.24 2.05 18.2 13.1 22.6 15.0 76.7 22.4 0.270 163
3.5 7.06 8.99 92.7 36.9 3.21 2.03 20.6 14.8 25.8 17.1 87.5 25.3 0.268 142
4.0 7.97 10.1 103 40.7 3.18 2.00 22.8 16.3 28.8 19.1 97.7 28.0 0.266 126
5.0 9.70 12.4 121 47.4 3.12 1.96 26.8 18.9 34.4 22.7 116 32.7 0.263 103
Continued...
132 133
Y
Hybox® 355
Rectangular hollow sections
Size Thickness Mass Area Moment Radius Elastic Plastic Torsional Torsional Superficial Approx.
of of Modulus Modulus Constant Constant Area Length
Inertia Gyration /tonne
100 x 40 3.0 6.13 7.81 92.3 21.7 3.44 1.67 18.5 10.8 23.7 12.4 59.0 19.4 0.270 163
4.0 7.97 10.1 116 26.7 3.38 1.62 23.1 13.3 30.3 15.7 74.5 24.0 0.266 126
5.0 9.70 12.4 136 30.8 3.31 1.58 27.1 15.4 36.1 18.5 87.9 27.9 0.263 103
100 x 50 3.0 6.60 8.41 106 36.1 3.56 2.07 21.3 14.4 26.7 16.4 88.6 25.0 0.290 152
4.0 8.59 10.9 134 44.9 3.50 2.03 26.8 18.0 34.1 20.9 113 31.3 0.286 116
5.0 10.5 13.4 158 52.5 3.44 1.98 31.6 21.0 40.8 25.0 135 36.8 0.283 95.4
6.0 12.3 15.6 179 58.7 3.38 1.94 35.8 23.5 46.9 28.5 154 41.4 0.279 81.5
100 x 60 3.0 7.07 9.01 121 54.6 3.66 2.46 24.1 18.2 29.6 20.8 122 30.6 0.310 141
3.5 8.16 10.4 137 61.9 3.63 2.44 27.4 20.6 33.8 23.8 139 34.8 0.306 123
4.0 9.22 11.7 153 68.7 3.60 2.42 30.5 22.9 37.9 26.6 156 38.7 0.306 108
5.0 11.3 14.4 181 80.8 3.55 2.37 36.2 26.9 45.6 31.9 188 45.8 0.303 88.7
6.0 13.2 16.8 205 91.2 3.49 2.33 41.1 30.4 52.5 36.6 216 51.9 0.299 75.7
100 x 80 3.0 8.01 10.2 149 106 3.82 3.22 29.8 26.4 35.4 30.4 196 41.9 0.350 125
4.0 10.5 13.3 189 134 3.77 3.17 37.9 33.5 45.6 39.2 254 53.4 0.346 95.4
5.0 12.8 16.4 226 160 3.72 3.12 45.2 39.9 55.1 47.2 308 63.7 0.343 77.9
120 x 40 3.0 7.07 9.01 148 25.8 4.05 1.69 24.7 12.9 32.2 14.6 74.6 23.5 0.310 141
4.0 9.22 11.7 187 31.9 3.99 1.65 31.1 15.9 41.2 18.5 94.2 29.2 0.306 108
5.0 11.3 14.4 221 36.9 3.92 1.60 36.8 18.5 49.4 22.0 111 34.1 0.303 88.7
120 x 60 3.0 8.01 10.2 189 64.4 4.30 2.51 31.5 21.5 39.2 24.2 156 37.1 0.350 125
3.5 9.26 11.8 216 73.1 4.28 2.49 35.9 24.4 44.9 27.7 179 42.2 0.348 1080
4.0 10.5 13.3 241 81.2 4.25 2.47 40.1 27.1 50.5 31.1 201 47.0 0.346 95.4
5.0 12.8 16.4 287 96.0 4.19 2.42 47.8 32.0 60.9 37.4 242 55.8 0.343 77.9
6.0 15.1 19.2 328 109 4.13 2.38 54.7 36.3 70.6 43.1 280 63.6 0.339 66.2
120 x 80 4.0 11.7 14.9 295 157 4.44 3.24 49.1 39.3 59.8 45.2 331 64.9 0.386 85.2
5.0 14.4 18.4 353 188 4.39 3.20 58.9 46.9 72.4 54.7 402 77.8 0.383 69.4
6.0 17.0 21.6 406 215 4.33 3.15 67.7 53.8 84.3 63.5 469 89.4 0.379 58.9
8.0 21.4 27.2 476 252 4.18 3.04 79.3 62.9 102 76.9 584 108 0.366 46.8
140 x 80 3.0 9.90 12.6 334 141 5.15 3.35 47.8 35.3 58.2 39.6 317 59.7 0.430 101
4.0 13.0 16.5 430 180 5.10 3.30 61.4 45.1 75.5 51.3 412 76.5 0.426 77.0
5.0 16.0 20.4 517 216 5.04 3.26 73.9 54.0 91.8 62.2 501 91.8 0.423 62.6
6.0 18.9 24.0 597 248 4.98 3.21 85.3 62.0 107 72.4 584 106 0.419 53.0
8.0 23.9 30.4 708 293 4.82 3.10 101 73.3 131 88.4 731 129 0.406 41.8
10.0 28.7 36.6 804 330 4.69 3.01 115 82.6 152 103 851 147 0.397 34.8
Continued...
134 135
Y
Hybox® 355
Rectangular hollow sections
Size Thickness Mass Area Moment Radius Elastic Plastic Torsional Torsional Superficial Approx.
of of Modulus Modulus Constant Constant Area Length
Inertia Gyration /tonne
150 x 100 4.0 14.9 18.9 595 319 5.60 4.10 79.3 63.7 95.7 72.5 662 105 0.486 67.2
5.0 18.3 23.4 719 384 5.55 4.05 95.9 76.8 117 88.3 809 127 0.483 54.5
6.0 21.7 27.6 835 444 5.50 4.01 111 88.8 137 103 948 147 0.479 46.1
8.0 27.7 35.2 1008 536 5.35 3.90 134 107 169 128 1206 182 0.466 36.
10.0 33.4 42.6 1162 614 5.22 3.80 155 123 199 150 1426 211 0.457 29.9
160 x 80 4.0 14.2 18.1 598 204 5.74 3.35 74.7 50.9 92.9 57.4 494 88.0 0.466 70.2
5.0 17.5 22.4 722 244 5.68 3.30 90.2 61.0 113 69.7 601 106 0.463 57.0
6.0 20.7 26.4 836 281 5.62 3.26 105 70.2 132 81.3 702 122 0.459 48.2
8.0 26.4 33.6 1001 335 5.46 3.16 125 83.7 163 100 882 150 0.446 37.9
180 x 80 4.0 15.5 19.7 802 227 6.37 3.39 89.1 56.7 112 63.5 578 100 0.506 64.5
5.0 19.1 24.4 971 272 6.31 3.34 108 68.1 137 77.2 704 120 0.503 52.3
6.0 22.6 28.8 1128 314 6.25 3.30 125 78.5 160 90.2 823 139 0.499 44.2
8.0 28.9 36.8 1362 377 6.08 3.20 151 94.1 198 111 1036 170 0.486 34.6
10.0 35.0 44.6 1570 429 5.94 3.10 174 107 234 131 1214 196 0.477 28.6
180 x 100 4.0 16.8 21.3 926 374 6.59 4.18 103 74.8 126 84.0 845 127 0.546 59.7
5.0 20.7 26.4 1124 452 6.53 4.14 125 90.4 154 103 1045 154 0.543 48.3
6.0 24.5 31.2 1310 524 6.48 4.10 146 105 181 120 1227 179 0.539 40.8
8.0 31.4 40.0 1598 637 6.32 3.99 178 127 226 150 1565 222 0.526 31.8
10.0 38.1 48.6 1859 736 6.19 3.89 207 147 268 177 1859 260 0.517 26.2
200 x 100 4.0 18.0 22.9 1200 411 7.23 4.23 120 82.2 148 91.7 985 142 0.586 55.5
5.0 22.3 28.4 1459 497 7.17 4.19 146 99.4 181 112 1206 172 0.583 44.9
6.0 26.4 33.6 1703 577 7.12 4.14 170 115 213 132 1417 200 0.579 37.9
8.0 33.9 43.2 2091 705 6.95 4.04 209 141 267 165 1811 250 0.566 29.5
10.0 41.3 52.6 2444 818 6.82 3.94 244 164 318 195 2154 292 0.557 24.2
200 x 120 4.0 19.3 24.5 1353 618 7.43 5.02 135 103 164 115 1345 172 0.626 51.9
5.0 23.8 30.4 1649 750 7.37 4.97 165 125 201 141 1652 210 0.623 42.0
6.0 28.3 36.0 1929 874 7.32 4.93 193 146 237 166 1947 245 0.619 35.4
8.0 36.5 46.4 2386 1079 7.17 4.82 239 180 298 209 2507 308 0.606 27.4
10.0 44.4 56.6 2806 1262 7.04 4.72 281 210 356 250 3007 364 0.597 22.5
200 x 150 4.0 21.2 26.9 1584 1021 7.67 6.16 158 136 187 154 1942 219 0.686 47.3
5.0 26.2 33.4 1935 1245 7.62 6.11 193 166 230 189 2391 267 0.683 38.2
6.0 31.1 39.6 2268 1457 7.56 6.06 227 194 271 223 2826 313 0.679 32.1
8.0 40.2 51.2 2829 1816 7.43 5.95 283 242 344 283 3665 396 0.666 24.9
10.0 49.1 62.6 3348 2143 7.31 5.85 335 286 413 339 4428 471 0.657 20.4
Continued...
136 137
Y
Hybox® 355
Rectangular hollow sections
Size Thickness Mass Area Moment Radius Elastic Plastic Torsional Torsional Superficial Approx.
of of Modulus Modulus Constant Constant Area Length
Inertia Gyration /tonne
250 x 150 5.0 30.1 38.4 3304 1508 9.28 6.27 264 201 320 225 3285 337 0.783 33.2
6.0 35.8 45.6 3886 1768 9.23 6.23 311 236 378 266 3886 396 0.779 27.9
8.0 46.5 59.2 4886 2219 9.08 6.12 391 296 482 340 5050 504 0.766 21.5
10.0 57.0 72.6 5825 2634 8.96 6.02 466 351 582 409 6121 602 0.757 17.6
12.0 66.0 84.1 6458 2925 8.77 5.90 517 390 658 463 7088 684 0.738 15.2
12.5 68.3 87.0 6633 3002 8.73 5.87 531 400 678 477 7315 704 0.736 14.6
300 x 100 6.0 35.8 45.6 4777 842 10.2 4.30 318 168 411 188 2403 306 0.779 27.9
8.0 46.5 59.2 5978 1045 10.0 4.20 399 209 523 238 3080 385 0.766 21.5
10.0 57.0 72.6 7106 1224 9.90 4.11 474 245 631 285 3681 455 0.757 17.6
12.5 68.3 87.0 8010 1374 9.59 3.97 534 275 732 330 4292 521 0.736 14.6
300 x 200 6.0 45.2 57.6 7370 3962 11.3 8.29 491 396 588 446 8115 651 0.979 22.1
8.0 59.1 75.2 9389 5042 11.2 8.19 626 504 757 574 10627 838 0.966 16.9
10.0 72.7 92.6 11313 6058 11.1 8.09 754 606 921 698 12987 1012 0.957 13.8
12.0 84.8 108 12788 6854 10.9 7.96 853 685 1056 801 15236 1167 0.938 11.8
12.5 88.0 112 13179 7060 10.8 7.94 879 706 1091 828 15768 1204 0.936 11.4
400 x 200 8.0 71.6 91.2 18974 6517 14.4 8.45 949 652 1173 728 15820 1133 1.17 14.0
10.0 88.4 113 23003 7864 14.3 8.36 1150 786 1434 888 19368 1373 1.16 11.3
12.0 104 132 26248 8977 14.1 8.24 1312 898 1656 1027 22782 1591 1.14 9.6
12.5 108 137 27100 9260 14.1 8.22 1355 926 1714 1062 23594 1644 1.14 9.30
138 139
6.0 Service Centre Directory - UK and Ireland
Multi Products UK Corus Long Products Corus Service Centre Corus Strip Products -
Service Centre Farningham Road Station Sales Office
Corus Long Products The Steelpark South Darenth Unit 5, Walker Park
Service Centre Steelpark Way, Wednesfield Nr. Dartford, Kent DA4 9LD Blackamoor Road
Mossend Engineering Works Wolverhampton WV11 3SQ T +44 (0) 1322 227272 Guide
Unthank Road, Bellshill T +44 (0) 1902 484100 F +44 (0) 1322 864893 Blackburn BB1 2QE
Lanarkshire ML4 1DJ F +44 (0) 1902 484136 T +44 (0) 1254 55161
T +44 (0) 1698 748424 Corus Service Centre F +44 (0) 1254 693491
F +44 (0) 1698 747191 Corus Metal Centre Badminton Road Trading Estate
Unit 12 -13 Yate, Bristol BS37 5JU
Corus Service Centre Whitehall Road Industrial Estate T +44 (0) 1454 315314
Garmouth Road Whitehall Road, Great Bridge F +44 (0) 1454 326946 Hot Rolled & Profiles
Mosstodloch, Fochabers West Midlands DY4 7JT
Morayshire IV32 7LH T +44 (0) 121 522 5490 Corus Steel Service Centre Corus Plate
T +44 (0) 1343 820606 F +44 (0) 121 557 9320 Grange Stores Processing Centre
F +44 (0) 1343 821295 Port Talbot Works, Margam Mossend Engineering Works
Corus Service Centre Port Talbot SA13 2NG Unthank Road
Corus Metal Centre Spittlegate Industrial Estate T +44 (0) 1639 89 88 22 Bellshill
Midlothian Innovation Centre Grantham, Lincs NG31 7UP F +44 (0) 1639 89 59 14 Lanarkshire ML4 1DJ
Pentlandfield, Roslin T +44 (0) 1476 565522 T +44 (0) 1698 748424
Midlothian EH25 9RE F +44 (0) 1476 562459 Corus Metal Centre F +44 (0) 1698 747191
T +44 (0) 131 440 9036 or +44 (0) 1476 564238 Cross Grange Trading Estate
F +44 (0) 131 440 9038 Fairfax Road, Heathfield Corus Hot Rolled
Corus Metal Centre Newton Abbot, Devon TQ12 6UD Processing Centre
Corus Service Centre Foxhall Business Centre T +44 (0) 1626 835008 Oldfield Lane
Chainbridge Road Industrial Estate Foxhall Road, F +44 (0) 1626 835009 Wortley
Blaydon-on-Tyne Nottingham NG7 6LH Leeds LS12 4DH
Tyne & Wear NE21 5SS T +44 (0) 115 845 0229 T +44 (0) 113 263 4242
T +44 (0) 191 414 2121 F +44 (0) 115 845 0332 F +44 (0) 113 231 0491
F +44 (0) 191 414 2210 Regional Strip
Corus Service Centre Corus Hot Rolled
Corus Metalshop Fengate Drove Corus Strip Processing Centre
Unit 1, Trident Business Centre Brandon, Suffolk IP27 0PR Processing Centre PO Box 4
Startforth Road, Riverside Park T +44 (0) 1842 816200 The Steelpark Bridgnorth Road
Middlesbrough TS2 1PT F +44 (0) 1842 813019 Steelpark Way Wombourne
T +44 (0) 1642 243777 Wednesfield Wolverhampton
F +44 (0) 1642 243888 Corus Metal Centre Wolverhampton WV11 3SQ West Midlands WV5 8AT
12-14 Bridle Close T +44 (0) 1902 484200 T +44 (0) 1902 324444
Corus Service Centre Stewarts Road F +44 (0) 1902 484234 F +44 (0) 1902 324204
Unit 5, Walker Park Finedon Road Industrial Estate
Blackamoor Road Wellingborough Corus Service Centre Corus Plate Processing Centre
Guide, Blackburn BB1 2QE Northants NN8 4RN Marlow Steel Works Park Road, Cradley
T +44 (0) 1254 55161 T +44 (0) 1933 440123 Colndale Road Halesowen
F +44 (0) 1254 670836 F +44 (0) 1933 440326 Poyle Trading Estate West Midlands B63 2RN
Colnbrook, Slough SL3 0HL T +44 (0) 1384 894242 (Sales)
Corus Metalshop Corus Metal Centre T +44 (0) 1753 683131 T +44 (0) 1384 897377 (Admin)
Rutland Road, Sheffield S3 9PG Severn Drive F +44 (0) 1753 684372 F +44 (0) 1384 898018
T +44 (0) 114 275 8833 Tewkesbury Business Centre
F +44 (0) 114 273 7766 Tewkesbury Corus Service Centre Corus Plate Processing -
Gloucestershire GL20 8TX Severn Bridge Industrial Estate Sales Office
Corus Service Centre T +44 (0) 1684 856626 Caldicot Oldfield Lane
Wakefield Road F +44 (0) 1684 856726 South Wales NP26 5PW Wortley
Stourton, Leeds LS10 1AY T +44 (0) 1291 421732 Leeds LS12 4DH
T +44 (0) 113 276 0660 F +44 (0) 1291 425085 T +44 (0) 113 230 8500
F +44 (0) 113 272 7197 F +44 (0) 113 230 8525
140 141
6.0 Service Centre Directory - UK and Ireland
Corus Colorsteels -
Sales Office
First Floor, St James’ House
Pendleton Way
Salford, Manchester M6 5FW
T +44 (0) 161 736 0191
F +44 (0) 161 745 7962
Corus Colorsteels -
Sales Office
The Steelpark, Steelpark Way
Wednesfield
Wolverhampton WV11 3SQ
T +44 (0) 1902 484272
F +44 (0) 1902 484279
142 143
Care has been taken to ensure that the contents of this publication are
accurate, but Corus UK Limited and its subsidiary companies do not accept
responsibility for errors or for information which is found to be misleading.
Suggestions for or descriptions of the end use or application of products or
methods of working are for information only and Corus UK Limited and its
subsidiaries accept no liability in respect thereof. Before using products
supplied or manufactured by Corus UK Limited customers should satisfy
themselves of their suitability.