Professional Documents
Culture Documents
com
Overview
This manual is the RF test manual which includes the test preparation and test procedure.
1.Test preparation
1.1.Hardware connection
Hardware connection diagram as follow:
Connect RF antenna and 5V power adapter to module. Connect B2’s RS232 interface and Ethernet interface to PC
directly.
1.2.Software
WinPcap.exe
QATool_Dbg.exe
Serial port software(Such as USR-WIFI232-Setup.exe to send AT commands)
2.Test procedure
Step 1: Install WinPcap.exe on PC firstly.
Step 2: Complete hardware connection in 1.1.Hardware connection and run the serial port software
USR-WIFI232-Setup.exe.
1.Write correct Com port and baud rate.(Default baud rate of B2 is 57600)
2.Click ‘Open Com’ to open Com port and software displays ‘Close Com’ means opening Com port
successfully.
3.Click ‘+++a’ to enter AT command mode. Left bottom part of software- ’logs’ returns ‘a+ok’ means module
entering AT command mode.
4.Send command ‘AT+EPHY’. Left bottom part of software- ’logs’ returns ‘AT+EPHY+OK’ means ‘AT+EPHY’
command configuring module successfully.
5.Send command ‘AT+ATED’. Left bottom part of software- ’logs’ returns ‘AT+ATED+OK’ means ‘AT+ATED’
command configuring module successfully.
Step 4: Run software QATool_Dbg.exe and finish following steps to enter software parameters interface.
3.Contact Us
Company: Jinan USR IOT Technology Limited
Address: Floor 11, Building 1, No. 1166 Xinluo Street, Gaoxin District, Jinan, Shandong, 250101, China
Web: www.usriot.com
Support: h.usriot.com
Email: sales@usr.cn
Tel: 86-531-88826739/86-531-55507297
4.Disclaimer
This document provides the information of USR-WIFI232-B2 products, it hasn’t been granted any intellectual
property license by forbidding speak or other ways either explicitly or implicitly. Except the duty declared in
sales terms and conditions, we don’t take any other responsibilities. We don’t warrant the products sales and use
explicitly or implicitly, including particular purpose merchant-ability and marketability, the tort liability of any
other patent right, copyright, intellectual property right. We may modify specification and description at any
time without prior notice.
5.Update History