Professional Documents
Culture Documents
PROTECTA Series
EN 60669-1 CEI 23-50
Switches for household and similar fixed-electrical installation. Plugs and sockets for domestic and similar applications.
Part 1: general requirements. Part 1: general requirements.
IEC 60884-1
Plugs and socket-outlets for household and similar purposes.
Part 1: general requirements.
TECHNICAL CHARACTERISTICS
Rated current: 10A-13A-15A-16A
Rated voltage: 250V~
Frequency: 50Hz
Insulating voltage: 250V~
VERSIONS TECHNICAL CHARACTERISTICS Protection degree: IP66
Operating ambient temperature: -5°C +60°C
Rated current: 10A-10AX-20A-20AX
One way switch single pole Installation ambient temperature: -20°C +60°C
- flush mounting Rated voltage: 250V~ Cabling 10A: 0,75 mmq - 2,5 mmq
- surface mounting Frequency: 50Hz capacity 13A: 2,5 mmq - 6 mmq
of the terminal: 15A: 2,5 mmq - 6 mmq
Insulating voltage: 250V~ 16A: 1 mmq - 2,5 mmq
Two way switch single pole Protection degree: IP66 (according to ref. standard)
- flush mounting Operating ambient temperature: -20°C +60°C Glow Wire test: 650°C / 850°C
- surface mounting Halogen Free: Yes
Cabling 3x2,5mm2
capacity 2x4mm2 Material: Engineering plastic
Intermediate switch of the terminal: 1x6mm2 Cable inlets: M20
- flush mounting Glow Wire test: 650°C/850°C Colour: Base: Grey RAL 7035
- surface mounting Cover: tinted transparent
Halogen free: Yes
Material: Engineering plastic
Bell push switch single pole The IP66 degree of protection with the plug inserted is Italian bivalent Italian German standard 16A French
Cable inlet: M20 guaranteed mainly with angled plugs which can be standard 16A standard – 16A 137.4412 standard – 16A
- flush mounting
coupled with the respective Standard sockets. P17/P11 P30 137.6412 P31
- surface mounting Colour: Grey RAL 7035 This is the breakdown for the main Italian and 137.4403 137.4404 137.4407 137.4411
LED colour: Orange European standards (Europe mainland): 137.6403 137.6404 137.6407 137.6411
Plug 10A 2P+E extra flat Wireable (body length up to 50 mm) •
Double pole switch
SPA11 Permanent (body length up to 50 mm) •
- flush mounting
- surface mounting Plug 16A 2P+E extra flat Wireable (body length up to 50 mm) •
SPA17 Permanent (body length up to 50 mm) •
Plug 10A 2P straight Wireable (body length up to 41 mm) • • •
S10 “Europlug” Permanent (body length up to 50 mm) • • •
BEHAVIOUR WITH CHEMICAL AND ATMOSPHERIC AGENTS Wireable (body length up to 41 mm) •
Plug 10A 2P+E straight S11
Permanent (body length up to 50 mm) •
PROTECTA Series
Tinted polycarbonate cover
EN 60670-1 (2005-10) to see inside
Boxes and enclosures for electrical accessories
Polycarbonate box
for household and similar fixed electrical installations. shockproof, chemical
Part 1: general requirements. and UV resistant 3 pin operated shutter
on socket
Empty enclosure to be
assembled as for specific
VERSIONS TECHNICAL CHARACTERISTICS needs
Easy clip-on modular
Protection degree: IP66 (*) devices to suit individual
Empty 1-module enclosure requirements
- flush mounting Operating ambient temperature: -5°C +60°C
- surface mounting Installation ambient temperature: -20°C +60°C
Glow Wire test: 650°C
Empty 2-module enclosure Halogen free: Si
- flush mounting
Material: Engineering plastic Stylish design of flush
- surface mounting
mounting box
IK degree at 20°C: IK07