Professional Documents
Culture Documents
SIMBANK S1 is an equipment which can integrated storage 192 SIM cards. It can be
managed by SIM server remotely. Its maximum capacity is 192.Hot swapping of SIM cards is
environment; The management and monitoring platform can also easily get: card status, device Commented [P3]: The Ucloudlink OSS system can also
manage the sinbank ,such as SIM card status, alarm of
status, fault and error alarm of SIMBANK. SIMBANK S1 can be able to be long-term stable SIMBANK .
SIMBANK S1, with a maximum storage capacity of 192 SIM cards, is able to manage, read
and write the SIM cards remotely. Through SIMBANK S1 and SIM server of GlocalMe, SIM cards
can be called remotely. SIM card hot swapping is supported by S1. The installation of SIMBANK
S1 is quite easy and doesn’t have tough site requirements. Once integrated with Management &
Monitor platform, it’s able to: 1) Monitor SIM card status; 2) Monitor SIMBANK S1 status; 3)
Report alarm and malfunction, making it possible to operate stably without much attention in
long term.
II Appearance
redundancy ,;;
upgrade;r;
Formatted: 列出段落1
IV Product specification
Details as belowFollows:
Changeing RecordsNote
Formatted Table
Rev Date
Formatted Table
Type specification
Voltage 12V-24V,>25W
Voltage & Power
Hardware SIM Voltage 3V/1.8V self-adaption
Interface
RJ45 Dual-RJ45, self-adaption
Dual-Power Supply,12-24V,
DC Power:RCA5.5
self-adaption
Detecting Temperature of
Sensor Temperature Sensor
Environment
Configureing and
Web Configure Page
UI MonitorDetecting
Language English
Diagnosis Support
LRemoteong-distance
Local upgrade
maintenance Firmware upgrade
RemoteOnline upgrade
Formatted Table
China GB,CCC
CE EN55022、EN55024、
Europe
EN60950-1
CertificationAuthentication
America FCC Part15B Class A
Japan VCCI,V-3
authentication service uUsing TCP protocol. The terminals, such as Mobile Phone, establish a
connection with service center using TCP. , From the service center, tThe terminals can get the
beFollows:
Managemenand monitoring center Encrypting & authentication
Service center
Firewall
internet
Ucoludlink Global Service center
internet
Firewal
BS
Ethernet-switch Terminal
Distributed Machine
Room
Application diagram
DeploymentUsing Cases:
1. For Lless than two sets of SIMBANK equipmentS1, you do not need to use the cabinet is not
required, SIMBANK S1 can be stacked up and down, as shown below:
2. For Large scale application, you should install S1 needs to be installed into the cabinet, as
shown below, 42U height cigh cabinet can housebe installed 34 S1 SIMBANK S1s.
Note: customers can choose different heights of the cabinet according to the actual needs. As
shown in the figure above, the cabinet needs to be equipped with an Ethernet switch。