Professional Documents
Culture Documents
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
Ravindra Kumar Soni
OVERALL ANALYSIS COMPARISON REPORT SOLUTION REPORT
(Enroll User) Sign out
Q. 1
B
HOME
ideal
MY TEST
C
BOOKMARKS elicit
Correct Option
MY PROFILE
Solution :
(c)
REPORTS Option (c) is the correct option. The meaning of the word EDUCE is to develop something
potential or latent; elicit means to draw out something hidden or latent.
BUY PACKAGE
D
ASK AN EXPERT
demand
QUESTION ANALYTICS
Q. 2
Choose the most appropriate word to fill in the blanks in the given sentence:
The gyration in art has not lost its steam; it _________ on as fiercely as ever.
FAQ Have any Doubt ?
A
Trudges
B
ambles
C
meanders
D
rages
Correct Option
Solution :
(d)
Not lost its steam implies that it is going strong leading to option (d).
QUESTION ANALYTICS
Q. 3
B
Where shall I send the flowers to?
C
In my family, money was never spoken about.
Solution :
HOME (d)
Option (d) is the only option which is grammatically incorrect.
MY TEST The structure of sentence while using prepositions, we can use which and whom but NOT
who and that.
The correct usage for (d) will be “What does she look like?”
BOOKMARKS Similarly, option (b) is correct whereas ‘To where shall I send the flowers?’ will be incorrect
usage.
MY PROFILE Likewise, option (a) and (c) have correct use of prepositions.
REPORTS
QUESTION ANALYTICS
BUY PACKAGE
ASK AN EXPERT Q. 4
From a container containing 100 litres of pure milk, 20% quantity was removed and replaced by
water. This process was repeated 2 more times. After the third iteration, the quantity of milk left
in the container is
FAQ Have any Doubt ?
A
50 litres
B
51.2 litres
Your answer is Correct
Solution :
(b)
C
49.6 litres
D
60 litres
QUESTION ANALYTICS
Q. 5
If N = 15! – 13!, then the largest prime number that divides N is _____________.
FAQ Have any Doubt ?
Ravindra Kumar Soni
19 (Enroll User) Sign out
Correct Option
Solution :
19
HOME
Q. 6
MY TEST
Consider the statements given below:
S1: Only students can participate in the race.
BOOKMARKS
S2: Some participants in the race are girls.
S3: All girl participants in the race are invited for coaching.
MY PROFILE Which of the following conclusions can be drawn from the above 3 statements?
FAQ Have any Doubt ?
REPORTS
A
BUY PACKAGE All participants in the race are invited for coaching.
ASK AN EXPERT
B
All students are invited for coaching.
C
All participants in the race are students.
Your answer is Correct
Solution :
(c)
Option (c) is the converse of S1. Since ONLY students can participate in the race, it implies
that ALL participants in the race are students.
S3 negates option (a) as well as (b) since ONLY girls are invited for coaching.
D
None of the above 3 options is a valid conclusion.
QUESTION ANALYTICS
Q. 7
300 staff members went for a picnic. 180 members played volleyball, 150 played throw ball and
120 played cricket, whereas 15 did not play any game. 150 members played exactly one game. If
30 members played all the three games, then the number of members played exactly two games
will be
FAQ Have any Doubt ?
A Ravindra Kumar Soni
105 (Enroll User) Sign out
Your answer is Correct
Solution :
(a)
HOME
B
MY TEST 120
BOOKMARKS C
126
MY PROFILE
REPORTS D
165
BUY PACKAGE
QUESTION ANALYTICS
ASK AN EXPERT
Q. 8
In a certain coding language, MATH is coded as PDXL and BIO is coded as FLR. In the same
language LIFE can be coded as
FAQ Have any Doubt ?
A
ILBG
B
MLBJ
C Ravindra Kumar Soni
PMJI (Enroll User) Sign out
D
PLJH
Your answer is Correct
Solution :
(d)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
QUESTION ANALYTICS
Q. 9
The value of is
B
5000
Your answer is Correct
Solution :
(b)
C Ravindra Kumar Soni
(Enroll User) Sign out
D
2
QUESTION ANALYTICS
If the difference between the compound interest (yearly) and simple interest on a certain sum of
money is Rs.72 at an interest of 12% per annum for 2 years, then the principal amount is
HOME Rs._____________.
FAQ Have any Doubt ?
MY TEST
BOOKMARKS 5000
Correct Option
MY PROFILE
Solution :
5000
REPORTS
BUY PACKAGE
ASK AN EXPERT
QUESTION ANALYTICS
Q. 11
The tension in the given string holding a solid block A below the surface of liquid is T0 at rest.
Assume the density of liquid is more than the density of solid block. When the vessel B is given
an upward acceleration a, the tension T in the given string is given by
Correct Option
Solution :
(a)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
QUESTION ANALYTICS
Q. 12
Solution :
(a)
B
saturated vapour at 0°C
D
HOME
saturated vapour at atmospheric pressure
MY TEST
QUESTION ANALYTICS
BOOKMARKS
MY PROFILE
Q. 13
REPORTS A particle of mass m is suspended from a ceiling through a string of length and moves in a
horizontal circle of radius r , then
BUY PACKAGE
ASK AN EXPERT
B
C Ravindra Kumar Soni
(Enroll User) Sign out
Solution :
(d)
Ravindra Kumar Soni
Course: GATE+ESE
Mechanical Engineering (ME)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
QUESTION ANALYTICS
Q. 14
A
Permeability of moulding sand is increased with coarse grain size
B
Refractoriness of moulding sand is increased with fine grain size
Correct Option
Solution :
(b)
C
Permeability of moulding sand is increased with decreasing clay content
D
Green compression strength of moulding sand increases with fine grain size
QUESTION ANALYTICS
Q. 15
Solution :
(a)
B
increases heat transfer rate
D
HOME
decreases compressor power
MY TEST
QUESTION ANALYTICS
BOOKMARKS
MY PROFILE
Q. 16
REPORTS A solid bar of 20 mm diameter and 0.8 m long. It is subjected to a torque of 30 Nm. What is the
maximum strain energy stored? (Take G = 90 GPa)
FAQ Have any Doubt ?
BUY PACKAGE
A
ASK AN EXPERT
0.455 J
B
4.55 J
C
2.55 J
D
0.255 J
Your answer is Correct
Solution :
(d)
QUESTION ANALYTICS
Q. 17
An electric light fixture weighing 200 N is supported as shown
Ravindrabelow. TheSoni
Kumar tensile force in the wire
BC is (Enroll User) Sign out
A
57.2 N
HOME
MY TEST B
77.0 N
BOOKMARKS
C
MY PROFILE
68.2 N
REPORTS
D
BUY PACKAGE 87.5 N
Your answer is Correct
ASK AN EXPERT
Solution :
(d)
QUESTION ANALYTICS
Q. 18
The total number of instantaneous centre of rotation for a pantograph mechanism are:
FAQ Have any Doubt ?
A
6
Correct Option
Solution :
(a)
B
10
Your answer is Wrong
C Ravindra Kumar Soni
15 (Enroll User) Sign out
D
5
QUESTION ANALYTICS
BOOKMARKS
B
24.5 MPa
MY PROFILE
REPORTS C
25 MPa
Your answer is Correct
BUY PACKAGE
Solution :
ASK AN EXPERT
(c)
D
40 MPa
QUESTION ANALYTICS
Q. 20
A bracket is welded to the vertical plate by means of two fillet welds as shown in figure. The
stresses induced in the weld are
B
both shear and bending stress
Your answer is Correct
Solution :
(b)
The given weld is subjected to primary shear and bending stress.
Ravindra Kumar Soni
Course: GATE+ESE
Mechanical Engineering (ME) C
primary and secondary shear stresses
HOME D
bending stress only
MY TEST
MY PROFILE
Q. 21
REPORTS
For a given material, Young’s modulus is 100 GN/m2 and shear modulus is 40 GN/m2. The value
BUY PACKAGE of Poissons ratio is
FAQ Have any Doubt ?
ASK AN EXPERT
A
0.16
B
0.25
Your answer is Correct
Solution :
(b)
C
0.45
D
0.33
QUESTION ANALYTICS
Q. 22
A
x2 + y2 + z2 = 0
B
x+y+z=0
C Ravindra Kumar Soni
xy + yz + z x = 0 (Enroll User) Sign out
Your answer is Correct
Solution :
(c)
HOME
MY TEST
BOOKMARKS
D
x2y + y2z +z2x = 0
MY PROFILE
BUY PACKAGE
Q. 23
ASK AN EXPERT
For an air standard Brayton cycle, increase in the maximum cycle temperature of the cycle, while
keeping the pressure ratio same would result in
FAQ Solution Video Have any Doubt ?
A
increase in air standard efficiency
B
decrease in air standard efficiency
C
no change in air standard efficiency
Your answer is Correct
Solution :
(c)
D
increase in efficiency but reduction in work
QUESTION ANALYTICS
Q. 24
A cubic equation is defined by the determinant The sum of and product of roots
Solution :
(a)
B
HOME 3a and 2a3
MY TEST
C
3a3 and –2a3
BOOKMARKS
MY PROFILE D
0 and 2a3
REPORTS
QUESTION ANALYTICS
BUY PACKAGE
ASK AN EXPERT
Q. 25
if Ifis a radius vector and is a constant vector, then ‘grad
is
FAQ Have any Doubt ?
A
0
Solution :
(b)
QUESTION ANALYTICS
Q. 26
3
A solid sphere of 8 cm diameter, has an internal energy generation
Ravindra Kumarrate 5000
Soni W/m . If external
surface temperature of the sphere is 6.5°C, then the temperature at the centre of sphere
(Enroll User) Signisout
_______°C. Take K (for sphere material) = 0.2 W/m°C
FAQ Solution Video Have any Doubt ?
13.16(13.15 - 13.17)
Your answer is Correct13.166
Solution :
13.16(13.15 - 13.17)
Ravindra Kumar Soni
Course: GATE+ESE
Mechanical Engineering (ME)
HOME
MY TEST
QUESTION ANALYTICS
BOOKMARKS
MY PROFILE
Q. 27
REPORTS
A turbine develops 1000 kW when running at 2500 rpm. The turbine is running under head of 25
m, if head on turbine is increased to 100 m, then power developed by the turbine is __________kW.
BUY PACKAGE FAQ Solution Video Have any Doubt ?
ASK AN EXPERT
8000
Your answer is Correct8000
Solution :
8000
QUESTION ANALYTICS
Q. 28
The demand and forecast of cars during the last year are 10000 and 12000 respectively. If the
forecast for current year, using simple exponential smoothing is 11400, then the value of
exponential smoothing constant α is ___________.
FAQ Solution Video Have any Doubt ?
0.3
Your answer is Correct.3
Solution :
0.3
QUESTION ANALYTICS
Q. 29
Patients arrive at a clinic at an average rate of 10 in 5 hour shift. The
Ravindra arrival
Kumar of patients follow
Soni
Poisson distribution. The average checkup time of a patient isUser)
(Enroll 20 minutes. The checkupSigntime
out
follows exponential distribution. The probability if a new customer arrives and he has to wait is
__________.
FAQ Solution Video Have any Doubt ?
0.67
Correct Option
Solution :
Ravindra Kumar Soni 0.67
Course: GATE+ESE
Mechanical Engineering (ME)
HOME
MY TEST
BOOKMARKS
BUY PACKAGE
Q. 30
ASK AN EXPERT
In a machining operation, doubling the cutting speed reduces the tool life to of the
0.25
Your answer is Correct.25
Solution :
0.25
QUESTION ANALYTICS
Q. 31
Solution :
0.141(0.140 - 0.150)
QUESTION ANALYTICS
HOME
MY TEST
Q. 32
BOOKMARKS A hole is specified as The mating shaft has a clearance fit with minimum clearance
of 0.02 mm. The hole tolerance is to be 1.5 times the shaft tolerance. The maximum clearance
MY PROFILE
between the hole and the shaft is _________mm.
BUY PACKAGE
0.04
ASK AN EXPERT Your answer is Correct.04
Solution :
0.04
QUESTION ANALYTICS
Q. 33
A helical spring is made of 15 mm wire closely coiled to a mean diameter of 120 mm with 20
coils. If compression in the coil is 80 mm, the value of gradually applied load is __________N.
(Take Gwire = 84 GPa)
FAQ Have any Doubt ?
Ravindra Kumar Soni
1230.47(1230 - 1231) (Enroll User) Sign out
Your answer is Correct1230.46
Solution :
1230.47(1230 - 1231)
MY TEST
Q. 34
BOOKMARKS
The particular integral solution of the differential equation The value of
MY PROFILE k is ________.
FAQ Solution Video Have any Doubt ?
REPORTS
BUY PACKAGE 16
Your answer is Correct16
ASK AN EXPERT
Solution :
16
QUESTION ANALYTICS
Q. 35
1
Your answer is Correct1
Solution :
1
QUESTION ANALYTICS
Q. 36
A heat engine receives 1500 J of heat supply at 1000 K and 1000 J of heat supply at 1500 K.
While rejecting heat to the sink at 500 K. The maximum work done by the engine is
FAQ Solution Video Have any Doubt ?
A Ravindra Kumar Soni
1083.33 J (Enroll User) Sign out
B
779.33 J
C
1416.67 J
Your answer is Correct
Ravindra Kumar Soni
Course: GATE+ESE Solution :
Mechanical Engineering (ME) (c)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
D
1720.67 J
QUESTION ANALYTICS
Q. 37
2000 cc of air takes 90 seconds to pass through a standard specimen of sand (5.08 cm high and
5.08 cm diameter). The manometer indicates pressure as 5 g/cm2. In this case the permeability
number is
FAQ Solution Video Have any Doubt ?
A
30
B
42
C Ravindra Kumar Soni
51 (Enroll User) Sign out
D
67
Correct Option
Solution :
(d)
HOME
MY TEST
BOOKMARKS
MY PROFILE
BUY PACKAGE
Q. 38
ASK AN EXPERT
The pressure in a liquid at two points in the same horizontal plane are equal. Consider an elevator
accelerating upwards and a car accelerating on a horizontal road. The above statement is correct
in
FAQ Solution Video Have any Doubt ?
A
car only
Your answer is Wrong
B
elevator only
Correct Option
Solution :
(b)
In case of elevator, the pseudo force is acting downwards and as such pressure will
increase but by equal amounts at all the points in horizontal plane. As such there is no
difference in the pressure between the two points in horizontal plane.
C
both of them
D
neither of them
QUESTION ANALYTICS
Q. 39
The work cycle of a mechanical component subjected toRavindra
completely reversed
Kumar Soni bending stresses
consists of two elements (Enroll User) Sign out
(i) ± 300 MPa for 50% of life
(ii) ± 500 MPa for 50% of life
Machine element has an ultimate strength (σu) of 600 MPa, and endurance limit (σe) of 200 MPa.
The fatigue curve for the element on a log-log plot is shown below. Then total life of the
component is
MY TEST A
3320 cycles
Correct Option
BOOKMARKS
Solution :
MY PROFILE (a)
REPORTS
BUY PACKAGE
ASK AN EXPERT
B
30660 cycles
C
1660 cycle
D
1700 cycles
QUESTION ANALYTICS
Q. 40 Ravindra Kumar Soni
(Enroll User) Sign out
Two vertical rods of steel and copper are fixed rigidly at the top. Each rod is 400 cm long. A cross
bar fixed to the rods at the lower ends carries a load of 4000 N as shown in figure. The bar
remain horizontal even after loading. What is the cross-section area of steel bar, if cross-section
area of copper bar is 100 mm2. Take Esteel = 200 GPa and Ecopper = 100 GPa
HOME
FAQ Have any Doubt ?
MY TEST
A
150 mm2
BOOKMARKS Your answer is Correct
MY PROFILE Solution :
(a)
REPORTS
BUY PACKAGE
ASK AN EXPERT
B
50 mm2
C
100 mm2
D
200 mm2
QUESTION ANALYTICS
Q. 41
If EI be flexural rigidity of the beam then which of the following
Ravindra is total
Kumar deflection
Soni at free end of
the cantilever ? (Enroll User) Sign out
HOME
B
MY TEST
BOOKMARKS
MY PROFILE C
REPORTS
BUY PACKAGE
D
ASK AN EXPERT
Solution :
(d)
QUESTION ANALYTICS
Q. 42
Figure shown below shows the layout of a quick return mechanism. Time ratio for working stroke
to the return stroke is 2. If the length of the working stroke is 100 mm, then the value of AP (in
mm) is
Solution :
(a)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
B
57.7
C
115.4
D
103.5
QUESTION ANALYTICS
Q. 43
A mechanical vibrating system vibrates with a frequency of 1 Hz when there is no damping. Later
damping is provided to the system, and the frequency of damped vibration is 0.8 Hz. The
damping factor of the damper is
FAQ Have any Doubt ?
A
0.75
B
0.8
C Ravindra Kumar Soni
0.5 (Enroll User) Sign out
D
0.6
Your answer is Correct
Solution :
(d)
HOME
MY TEST
MY PROFILE
Q. 44
REPORTS
A drum brake is shown in the figure. The drum is rotating in clockwise direction. The coefficient
BUY PACKAGE of friction between drum and shoe is 0.25. The brake torque carrying capacity is 1000 Nm. The
actuating force P in N is
ASK AN EXPERT
A
16000
B
8000
Your answer is Correct
Solution :
(b)
C Ravindra Kumar Soni
10000 (Enroll User) Sign out
D
1600
QUESTION ANALYTICS
HOME
MY TEST
MY PROFILE A
REPORTS
Your answer is Correct
BUY PACKAGE
Solution :
ASK AN EXPERT (a)
QUESTION ANALYTICS
Q. 46
In an IC engine piston effort is 50 kN, when crank has travelled
Ravindra 60°Kumar
from IDC.Taking
Soni obliquity ratio
as 4, what will be the thrust force on connecting rod at this instant
(Enroll User) ? Sign out
FAQ Have any Doubt ?
A
11 kN
B
51 kN
Correct Option
Ravindra Kumar Soni
Course: GATE+ESE Solution :
(b)
Mechanical Engineering (ME)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT C
48 kN
D
231 kN
QUESTION ANALYTICS
Q. 47
A solid shaft of 80 mm diameter is used for power transmission. It is replaced by hollow shaft of
outer diameter 100 mm. If power transmission capacity and material of both the shaft is same,
what is the internal diameter of hollow shaft for the same maximum stress?
FAQ Have any Doubt ?
A
83.6 mm
Your answer is Correct
Solution :
(a)
B
754 mm
C Ravindra Kumar Soni
91.1 mm (Enroll User) Sign out
D
67.6 mm
QUESTION ANALYTICS
BUY PACKAGE
ASK AN EXPERT
B
3.57 mm
Your answer is Wrong
C
5.1 mm
D
2.35 mm
QUESTION ANALYTICS
Q. 49
Three samples A, B and C of the same gas (γ = 1.5) have equal volume and temperatures. The
volume of each sample is doubled, the process being isothermal for A, adiabatic for B and
isobaric for C. If the final pressures are equal for the three samples, the ratio of initial pressure of
A, B and C respectively is
FAQ Solution Video Have any Doubt ?
B
C Ravindra Kumar Soni
(Enroll User) Sign out
Solution :
(d)
Ravindra Kumar Soni
Course: GATE+ESE
Mechanical Engineering (ME)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
QUESTION ANALYTICS
Q. 50
The sum of squares of the roots of quardratic equation x2 + (2 – a)x + 1 = a, has minimum value,
then the value of ‘a’ must be
FAQ Have any Doubt ?
A
0
B
1
Your answer is Correct
Solution :
(b)
C Ravindra Kumar Soni
2 (Enroll User) Sign out
D
–2
QUESTION ANALYTICS
BOOKMARKS
B
1.859
MY PROFILE
REPORTS C
1.895
Your answer is Correct
BUY PACKAGE
Solution :
ASK AN EXPERT
(c)
D
1.880
QUESTION ANALYTICS
Q. 52
Air at 20°C flows over a flat plate at 80°C. On measuring, it is observed that temperature at a
distance of 1 mm from the surface of the plate is 60°C. Take thermal conductivity of air K = 0.03
W/m°C. The value of local heat transfer coefficient (in W/m2°C) is __________. Assume linear
variation of temperature
FAQ Solution Video Have any Doubt ?
Ravindra Kumar Soni
10 (Enroll User) Sign out
Your answer is Correct10
Solution :
10
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
QUESTION ANALYTICS
Q. 53
A Francis turbine runner is designed to develop 7000 kW shaft power, under a net available head
of 5 m. The outer and inner diameter of runner are 6 m and 2 m respectively. The speed ratio of
turbine is 0.6. The specific speed of turbine is ___________unit.
FAQ Solution Video Have any Doubt ?
211.5(210 - 213)
Correct Option
Solution :
211.5(210 - 213)
QUESTION ANALYTICS
Q. 54
A shaft of 120 mm diameter rotates at 100 rpm in a 200 mm long bearing. The angular space
between the shaft and bearing is filled with oil of viscosity 0.7 poise. If the thickness of oil film is
0.075 mm, the power absorbed in the bearing is __________W.
FAQ Solution Video Have any Doubt ?
Ravindra Kumar Soni
27.78(27 - 28) (Enroll User) Sign out
Correct Option
Solution :
27.78(27 - 28)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
Your Answer is 27739.39
ASK AN EXPERT
QUESTION ANALYTICS
Q. 55
If shape factor between the two identical discs is 0.05. The shape factor of cylindrical surface
with respect to itself is ___________.
FAQ Solution Video Have any Doubt ?
Ravindra Kumar Soni
0.8812(0.87 - 0.89) (Enroll User) Sign out
Your answer is Correct.8812
Solution :
0.8812(0.87 - 0.89)
HOME
MY TEST
BOOKMARKS
REPORTS
Q. 56
BUY PACKAGE
A gas turbine power plant, working on Brayton cycle with regenerator effectiveness 70%. If the
ASK AN EXPERT turbine outlet temperature is 1000 K and compressor outlet temperature is 400 K. The
temperature of air at inlet to burner is _________K.
FAQ Solution Video Have any Doubt ?
820
Your answer is Correct820
Solution :
820
QUESTION ANALYTICS
Q. 57
A steam power cycle consists of single stage of expansion. Steam enters and leaves turbine at
specific enthalpy of 3565 kJ/kg and 2300 kJ/kg respectively. Steam leaves condenser at 0.10 bar
and with specific volume of 10–3 m3/kg. Steam pressure at turbine inlet is 150 bar. The steam
rate of plant is __________kg/kWh.
FAQ Solution Video Have any Doubt ?
Ravindra Kumar Soni
2.88(2.86 - 2.90) (Enroll User) Sign out
Your answer is Correct2.879
Solution :
2.88(2.86 - 2.90)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
QUESTION ANALYTICS
BUY PACKAGE
ASK AN EXPERT
Q. 58
In an orthogonal cutting operation, rake angle of tool is 10°, friction angle is 20° and shear angle
is 30°. The width of cut and uncut chip thickness are 2 mm and 0.2 mm respectively. If shear
strength of material is 400 N/mm2. The value of cutting force required is ___________ N.
FAQ Solution Video Have any Doubt ?
411.38(409 - 414)
Correct Option
Solution :
411.38(409 - 414)
QUESTION ANALYTICS
Q. 59
A given air sample at atmospheric pressure of 1 bar has specific humidity 0.02 kg vap./kg dry air
and relative humidity of 70%. The saturation pressure of air at its dry bulb temperature is
__________kPa.
FAQ Solution Video Have any Doubt ?
Ravindra Kumar Soni
4.428(4.3 - 4.6) (Enroll User) Sign out
Correct Option
Solution :
4.428(4.3 - 4.6)
HOME
MY TEST
BOOKMARKS
REPORTS
QUESTION ANALYTICS
BUY PACKAGE
ASK AN EXPERT Q. 60
For a manufacturing unit, demand of axles for the month of April and May is 1200 unit and 1000
units respectively. The forecast for April was 800 units. The forecast for June is _________.
Consider smoothing coefficient as 0.65.
FAQ Solution Video Have any Doubt ?
1021(1018 - 1024)
Your answer is Correct1021
Solution :
1021(1018 - 1024)
QUESTION ANALYTICS
Q. 61
A project consists of activities A to L. The duration of these activities
Ravindra (in days)
Kumar Soni are shown in
brackets of network diagram. Dotted line represent dummy activity.
(Enroll User) The minimum time required
Sign out
to finish the project is _____________days.
HOME
BOOKMARKS
39
MY PROFILE Your answer is Correct39
REPORTS Solution :
39
BUY PACKAGE
ASK AN EXPERT
QUESTION ANALYTICS
Q. 62
The voltage arc length characteristic of a DC arc is given by V = 25 + 5l where l = arc length in
mm. The power source characteristics can be approximated by a straight line. Open circuit
voltage is 100 V and short circuit current is 800 A. The optimum arc length is __________mm.
FAQ Solution Video Have any Doubt ?
Ravindra Kumar Soni
5 (Enroll User) Sign out
Your answer is Correct5
Solution :
5
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
QUESTION ANALYTICS
Q. 63
An engine working on ideal diesel cycle has a compression ratio of 19. The constant pressure
heat addition takes place for 8% of the stroke. Take γ = 1.4. The thermal efficiency (in %) for the
engine is ______________.
FAQ Solution Video Have any Doubt ?
62.02(61.00 - 63.00)
Your answer is Correct62.024
Solution :
62.02(61.00 - 63.00)
QUESTION ANALYTICS
Q. 64
If x2 + y2 = ax is the solution of the differential equation (x2 – y2)dx + mxydy = 0, then the value of
m will be equal to ________.
FAQ Have any Doubt ?
Ravindra Kumar Soni
2 (Enroll User) Sign out
Your answer is Correct2
Solution :
2
HOME
MY TEST
MY PROFILE
Q. 65
REPORTS
A car hire firm has two cars which it hires out day by day. The number of demands for a car in
each day is distributed as Poisson distribution with mean 1.5. The number of days in a leap year
BUY PACKAGE
on which neither of the two cars is on demand is ___________.
FAQ Solution Video Have any Doubt ?
ASK AN EXPERT
82 (81 - 83)
Correct Option
Solution :
82 (81 - 83)
QUESTION ANALYTICS