You are on page 1of 2

User Manual: BOD Incubator : JB-DWB: 2013-2014

Front Panel:

3
1

4
2

7 9
8

1. Actual/Running value of temperature (PV) display


2. Set value of temperature (SV) display
3. Actual/Running value of Timer(ET) display
4. Set value of Timer (ST) display
5. Power ON/OFF KEY
6. SET (Selection Key)
7. Shift Key
8. UP Key
9. Down Key

JANNAT BIOSYSTEMS Pvt Ltd , SCO-1132-1133, Cabin No.21, Sector-22B, Chandigarh-160022


Contact No. +91-9780073209 Email: jbpl.cdg@gmail.com, www.jbplcdg.com
(ISO 9001:2008 & 123485;2003 Certified Organization)
User Manual: BOD Incubator : JB-DWB: 2013-2014

Working:

1. Press Power Button on Front Panel to ON instrument.


2. Now instrument is start to heat or Cool as per set value of Temperature and Actual
as well as Set value temperature display on LCD Panel.
3. If real time temperature below “Set point Temperature” then Heater is ON and
Heating indication light constantly glows and if real time temperature (PV)
Above “Set point Temperature” then Cooling is ON and Cooling indication light
constantly glows.

Change Set Point Temperature:

Main Screen on Display

If User/ feel to change/adjust “Set point temperature” then they adjust the same by using
Temperature decrement and Increment (෺ or ෻) Keys.

1. Press SET Key


2. Now
3. Edit Temperature value by pressing<UP> or <DN> buttons (In-between 0° C to 99.9° C)
4. After that again press < SET > Button to save user setting.
5. Now “TIMER” edit menu shows on screen. If user want to edit/modify timer setting then once
again press <UP> or <DN> buttons to modify timer (In-between 00 Minute to 9999)
(Optional)
6. After that again press < SET > Button to save user setting.
7. When Finished the setting leave the all button. After that new set value will
take effect automatically and display mode change to Actual temperature mode

J ANNAT BIOSYSTEMS Pvt Ltd


Address: SCO-1132-1133, Cabin No.21, Sector-22B, Chandigarh-160022
Contact No. +91-9780073209
Email: jbpl.cdg@gmail.com
www.jbplcdg.com

An ISO9001:2008, WHO-GMP & ISO13485:2003


Certified Company

JANNAT BIOSYSTEMS Pvt Ltd , SCO-1132-1133, Cabin No.21, Sector-22B, Chandigarh-160022


Contact No. +91-9780073209 Email: jbpl.cdg@gmail.com, www.jbplcdg.com
(ISO 9001:2008 & 123485;2003 Certified Organization)

You might also like