You are on page 1of 43

ZXSDR B8200 L200

LTE Baseband Unit


Maintenance Guide

Version: V2.10.050

ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26771900
Fax: +86-755-26770801
URL: http://ensupport.zte.com.cn
E-mail: support@zte.com.cn
LEGAL INFORMATION
Copyright © 2011 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or
distribution of this document or any portion of this document, in any form by any means, without the prior written
consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by
contractual confidentiality obligations.
All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE
CORPORATION or of their respective owners.
This document is provided “as is”, and all express, implied, or statutory warranties, representations or conditions
are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose,
title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the
use of or reliance on the information contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications
covering the subject matter of this document. Except as expressly provided in any written license between ZTE
CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter
herein.
ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice.
Users may visit ZTE technical support website http://ensupport.zte.com.cn to inquire related information.
The ultimate right to interpret this product resides in ZTE CORPORATION.

Revision History

Revision No. Revision Date Revision Reason

R1.0 2011–9–15 First Edition

Serial Number: SJ-20110830195539-003

Publishing Date: 2011-9-15(R1.0)


Contents
About This Manual ......................................................................................... I
Chapter 1 Overview .................................................................................... 1-1
1.1 Maintenance Category........................................................................................ 1-1
1.2 Common Maintenance Methods .......................................................................... 1-1
1.3 Precautions........................................................................................................ 1-3

Chapter 2 Maintenance Information ......................................................... 2-1


2.1 Basic Maintenance Information Record................................................................ 2-1
2.2 Version Information Collection Table .................................................................... 2-1

Chapter 3 Routine Maintenance................................................................ 3-1


3.1 Routine Maintenance Information Definition ......................................................... 3-1
3.2 Routine Maintenance Items................................................................................. 3-2
3.3 Routine Maintenance Schedule........................................................................... 3-2
3.4 Daily Maintenance Items..................................................................................... 3-2
3.5 Monthly Maintenance Items ................................................................................ 3-3
3.6 Quarterly Maintenance Items .............................................................................. 3-3
3.7 Semiannual Maintenance Items .......................................................................... 3-5
3.8 Annual Maintenance Items.................................................................................. 3-5

Chapter 4 Maintenance Record Table....................................................... 4-1


4.1 Daily Maintenance Record .................................................................................. 4-1
4.2 Monthly Maintenance Record.............................................................................. 4-2
4.3 Quarterly Maintenance Record............................................................................ 4-3
4.4 Semiannual Maintenance Record ........................................................................ 4-4
4.5 Annual Maintenance Record ............................................................................... 4-4
4.6 Emergency Fault Handling Record ...................................................................... 4-5
4.7 Module Replacement Record .............................................................................. 4-6
4.8 Cable Replacement Record ................................................................................ 4-7

Chapter 5 Replacing Boards ..................................................................... 5-1


5.1 Replacing CC Board........................................................................................... 5-1
5.2 Replacing FS Board ........................................................................................... 5-2
5.3 Replacing BPL Board ......................................................................................... 5-3
5.4 Replacing SA Board ........................................................................................... 5-4
5.5 Replacing FAN Module ....................................................................................... 5-5
5.6 Replacing PM Module......................................................................................... 5-5

I
Chapter 6 Replacing Cables ...................................................................... 6-1
6.1 Replacing SA Cable ........................................................................................... 6-1
6.2 Replacing S1/X2 Gigabit Ethernet Cable.............................................................. 6-4
6.3 Replacing S1/X2 Electric Ethernet Cable ............................................................. 6-6
6.4 Replacing Dry Contact Cable .............................................................................. 6-7
6.5 Replacing GPS receiving Antenna Cable ............................................................. 6-8
6.6 Replacing Fiber Cable ........................................................................................ 6-9

Glossary .......................................................................................................... I

II
About This Manual
Purpose
The purpose of this manual is to let the carrier master the system maintenance of ZXSDR
B8200 L200.

Intended Audience
This document is intended for:
l Maintenance engineer
l Operation engineer

Prerequisite Skill and Knowledge


To use this document effectively, users should have a general understanding of wireless
telecommunications technology. Familiarity with LTE wireless network and its related
components is helpful.

What is in This Manual


This manual contains the following chapters:

Chapter Summary

Chapter 1, Overview Describes the common maintenance categories, maintenance


principles, and analysis methods, and precautions during
the routine maintenance

Chapter 2, Maintenance Information Describes the collection forms of the general maintenance
information and version information

Chapter 3, Routine Maintenance Describes the basic content of the routine maintenance of
the equipment, and lists the routine maintenance items of
different periods under different conditions

Chapter 4, Maintenance Record Describes the maintenance record for the service personnel
Table to refer to

Chapter 5, Replacing Boards Describes how to replace the boards

Chapter 6, Replacing Cables Describes how to replace the engineering cables

I
II
Chapter 1
Overview
Table of Contents
Maintenance Category ...............................................................................................1-1
Common Maintenance Methods .................................................................................1-1
Precautions ................................................................................................................1-3

1.1 Maintenance Category


According to the daily maintenance, the maintenance can be classified into four
categories: routine maintenance, notice processing, alarm processing, and common
problem processing.

Routine Maintenance
Routine maintenance is the periodical maintenance. It is to check the equipment running
state periodically. The problem detected during the check should be handled in time. Thus,
the hidden problem can be discovered and prevented, and the problem can be discovered
and handled promptly.

Notice Processing
Notice processing is to analyze various notices during the system running, judge whether
anomaly exists, and handle accordingly.

Alarm Processing
Alarm processing is to analyze various alarms during the system running, judge whether
the system runs normally, and handle accordingly.

Common Problem Processing


Common problem processing is to analyze and handle the detected problem.

1.2 Common Maintenance Methods


This topic describes the most common maintenance methods. During the actual
equipment maintenance, you need to combine various methods.

1-1

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


ZXSDR B8200 L200 Maintenance Guide

Fault Symptom Analysis


Generally, the wireless network equipment consists of several equipment entities. The
symptom varies with the fault that occurs on different entity. When you discover a fault
or receive a fault report, you can analyze the fault symptom, judge the fault on which
equipment entity causes this symptom. Thus, you can focus on checking the faulty
equipment entity.
In case of a sudden fault, it is especially important to analyze the fault symptom. Only
after analyzing the fault symptom carefully, can you locate the faulty equipment entity
precisely. It helps avoid performing incorrect operation on the equipment that runs normal,
and shorten the time to rectify the fault.

Alarm and Log Analysis


The eNodeB system can record errors that occur during the equipment running and
important running parameters. The errors and important running parameters are mainly
recorded in the log record file (including the operation log and system log) and the alarm
database of NetNumen server.
The functions of alarm management are:

l Checking the running states of the eNodeB system, NetNumen server node and
database, and external power.
l Collecting the fault and anomaly information generated during the running
l Presenting the information in the form of text, figure, voice, and light.
These functions help you learn the information in time and handle accordingly to ensure
the normal and reliable running of the eNodeB system.
In addition, the alarm information is recorded in the database for later reference and
analysis. You can check the operation log and system log through the log management
system. The log can be filtered according to your filtering criteria and displayed in the
time sequence order or in the inverted time sequence order. Thus, you can conveniently
check useful log information.

The alarm and log analysis helps analyze the cause of the fault and detect the hidden
problem of the system.

Signaling Tracing Analysis


The signaling tracing tool provided by the system helps analyze and locate the fault
effectively. According to the signaling tracing, you can learn whether the signaling flow is
correct, whether all messages in the signaling flow are correct, and whether all parameters
in the message are correct. Through the analysis, you can find the cause of the fault.

Instrument and Meter Test Analysis


Instrument and meter test is one of the most common methods used to locate faults.
Through the instrument and meter test, you can test the system running indexes and

1-2

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


Chapter 1 Overview

environment indexes, compare the test results with the indexes in the normal state, and
analyze the cause of the difference.

Comparison and Replacement


Replace the part that may be faulty with a normal part. If the fault is rectified after the
replacement, the fault is located.
This method is simple and practical. In addition, you can compare whether the states,
parameter and log files, and parameter settings of the same parts are the same. You can
implement the modification test to rectify the fault during the safe time.

Warning!
Perform this method during the safe time (00:00–04:00 in non-holidays is recommended).
Avoid the operation during the peak service hours and holidays.

1.3 Precautions
During the daily maintenance, pay attention to the following precautions:
1. Ensure that the equipment room is of normal temperature, clean, duct-proof and
moisture-proof. Prevent the rodent from entering the equipment room.
2. Ensure that the primary power supply of the system is stable and reliable. Check
the grounding and lightning protection grounding of the system regularly. Especially
before thunderstorm season and after thunderstorm, check the lightning protection
system and ensure that the facilities are normal.
3. Set up a sophisticated maintenance system to normalize the daily work of the service
personnel. Produce a detailed duty log. Record the daily running status, version, data
update, upgrade, and problem handling of the system in details to help the problem
analysis and handling. Produce a hand-over record to clarify the responsibility.
4. Do not play games and surf the Internet on the PC terminal. Do not install , run and
copy any software not related with the system on the PC terminal. Do not abuse the
PC terminal.
5. Set the NetNumen password according to the user levels, manage it strictly, change it
regularly, and keep it open only to the service personnel.
6. The service personnel should receive the induction training to learn certain equipment
and network knowledge. Perform the maintenance operation according to the
description in the related equipment manual. Wear the antistatic wrist strap before
touching the equipment to prevent the accident due to the man-made factor.
7. Do not blindly reset the equipment, load data or change data. Do not change the EMS
database data at random. Back up the data before changing the data. After changing
the data, confirm that the equipment runs normally in a certain period of time (generally
a week) before deleting the backup data. Record the change in time when changing
the data.

1-3

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


ZXSDR B8200 L200 Maintenance Guide

8. Prepare the following common instruments and meters: flathead screwdriver, cross
screwdriver, signaling analyzer, network cable pliers, multimeter, AC power for
maintenance, telephone line, and network cable. Test the meters regularly to ensure
the accuracy.
9. Check the spare parts and accessories regularly to ensure that they are in stock and
complete. Prevent them from being affected with damp and going mouldy. Store the
spare parts and accessories and the replaced parts and accessories separately, and
label them. Replenish the common spare parts and accessories in time when they are
used up.
10. Store the software and documentation that may be used during the maintenance in
the specified place. Thus, you can easily obtain them when necessary.
11. Lighting in the equipment room should meet the maintenance requirement. Repair the
broken light in time.
12. Handle the detected problem in time. In the case of the problem that cannot be
handled, contact the local ZTE branch office.
13. Place the contact information of the local ZTE branch office at a handy place and
inform all the service personnel to ensure a timely contact when necessary. Update
the contact list regularly.

Danger!
Checking and adjusting the power should be performed by professionals. Otherwise,
casualty and equipment failure may occur.

Warning!
Before changing and synchronizing data, obtain permission of the person in charge.
Otherwise, changing data at random may cause catastrophic failure.

1-4

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


Chapter 2
Maintenance Information
Table of Contents
Basic Maintenance Information Record ......................................................................2-1
Version Information Collection Table...........................................................................2-1

2.1 Basic Maintenance Information Record


Table 2-1 lists the equipment information to be collected during the ZXSDR B8200 L200
maintenance.

Table 2-1 Basic Maintenance Information Record

Basic Maintenance Information Record

ZXSDR B8200 North latitude


L200 name

ZXSDR B8200 East longitude


L200 type

ZXSDR B8200 Altitude


L200 No.

ZXSDR B8200
L200 ID (OMC
configuration)

City/County Telephone of the


equipment room

Position of the
equipment room

Adopted daisy
chain mode (de-
scribe the link
structure)

2.2 Version Information Collection Table


Collect and record the ZXSDR B8200 L200 version information to help the ZXSDR B8200
L200 maintenance. Table 2-2 lists the ZXSDR B8200 L200 version information to be
collected.

2-1

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


ZXSDR B8200 L200 Maintenance Guide

Table 2-2 ZXSDR B8200 L200 version information

Module Version

CC version

BPL version

SA version

FA version

PM version

Remarks:

2-2

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


Chapter 3
Routine Maintenance
Table of Contents
Routine Maintenance Information Definition ...............................................................3-1
Routine Maintenance Items ........................................................................................3-2
Routine Maintenance Schedule ..................................................................................3-2
Daily Maintenance Items ............................................................................................3-2
Monthly Maintenance Items........................................................................................3-3
Quarterly Maintenance Items......................................................................................3-3
Semiannual Maintenance Items .................................................................................3-5
Annual Maintenance Items .........................................................................................3-5

3.1 Routine Maintenance Information Definition


Routine maintenance means to implement preventive check on the equipment regularly.
This guarantees the stable running of the equipment for a long period.
Routine maintenance mainly includes the following two aspects:

l Check and test the running status, functions, major performance indicators, and
hardware completeness of the ZXSDR B8200 L200 equipment regularly and in
a planned way. The check and test must be done according to the technical
specifications and technical requirements of the equipment parts.
l Regular check and cleaning. Check the hardware of the ZXSDR B8200 L200 and its
attachment equipment. If any problem is detected, make adjustment, correction, or
replacement immediately to ensure the hardware completeness. Regularly maintain
and clean the part that is highly dustproof or vulnerable. Regularly clean the major
parts of other peripheral equipment to ensure the normal running.
Make reasonable periodical table for the periodical check and maintenance work according
to the actual condition, and conform with the specified maintenance period to implement
the work.

Note:
The ZXSDR B8200 L200 is an unattended equipment. Its realtime running status can be
observed on the OMC side. The OMC service personnel are responsible to implement the
daily maintenance of the ZXSDR B8200 L200.

3-1

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


ZXSDR B8200 L200 Maintenance Guide

3.2 Routine Maintenance Items


Routine maintenance consists of various regular check and maintenance tasks. This
guarantees that the equipment runs in the best state to meet the service requirement of
the subscribers and prevents potential failure.
Routine maintenance of the equipment includes but is not limited to the following items:
l Checking the working environment of the equipment
l Collecting performance statistics of the equipment
l Maintaining the alarm system
l Backing up data
l Checking spare parts
l Maintaining the board
l Checking the log
l Checking the grounding and lightening protection systems
l Checking the running status of the power module
l Checking the antenna feeder system
l Preparing for holidays
l

3.3 Routine Maintenance Schedule


According to different maintenance periods, routine maintenance can be categorized into
periodical maintenance and casual maintenance.

The periods of periodical maintenance are daily, monthly, quarterly, semiannual, and
annual. The items of casual maintenance are determined according to the actual condition
of the faulty equipment.
The specific items, operation guide, and reference standard of the periodical maintenance
vary with the period. The actual condition and service of each carrier vary. Therefore,
determine a proper period of routine maintenance according to the actual condition.

3.4 Daily Maintenance Items


Table 3-1 lists the daily maintenance items of the ZXSDR B8200 L200.

Table 3-1 Daily Maintenance Items

Maintenance Item Sub-Item Description

Checking the alarm Alarm processing Check all alarms from the time of last check
and notice to the current time on the EMS terminal and
categorize and process the alarms according
to the alarm level

Notice processing Analyze the notice that appears frequently.


Ignore the common notice

3-2

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


Chapter 3 Routine Maintenance

Maintenance Item Sub-Item Description

Troubleshooting Handling common troubles Handle the common troubles in the alarms
such as transmission failure and board failure

Handling the subscriber Analyze and handle the network quality


complaints problem reported by subscribers

3.5 Monthly Maintenance Items


Table 3-2 lists the monthly maintenance items of the ZXSDR B8200 L200.

Table 3-2 Monthly Maintenance Items

Maintenance Item Description

Checking the tem- Check the temperature and humidity of the equipment and equipment room.
perature and hu- Check the temperature in the alarm management system of the OMC. Measure
midity the humidity with a hygrometer

Checking the run- Check the running status of the module in the alarm management system of the
ning status of the OMC. As for the faulty module, check through the diagnostic test system
module

Checking the voice Implement the test by using a terminal on the ZXSDR B8200 L200 site. Observe
service and data the service. Survey the service condition of each sector. Check whether discon-
service nection, interruption, and throughput abnormality exist

Checking the run- Check the power supply of the ZXSDR B8200 L200
ning status of the
power module

Checking the
grounding and light-
ening protection Check the working status of the grounding and lightening protection systems
system and check whether connections are reliable

Other remarks:

3.6 Quarterly Maintenance Items


Table 3-3 lists the quarterly maintenance items of the ZXSDR B8200 L200.

3-3

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


ZXSDR B8200 L200 Maintenance Guide

Table 3-3 Quarterly Maintenance Items

Maintenance Item Description

Checking the running status of the ZXSDR Check the running status of the module in the alarm
B8200 L200 module management system of the OMC. As for the faulty mod-
ule, check through the diagnostic test system

Checking the voice service and data service Implement the test by using a terminal on the ZXSDR
B8200 L200 site. Observe the service. Survey the ser-
vice condition of each sector. Check whether discon-
nection, interruption, and throughput abnormality exist

Checking the running status of the power Check the power voltage of the ZXSDR B8200 L200
module

Checking the grounding and lightning protec- Check the working status of the grounding and lighten-
tion systems ing protection systems and check whether connections
are reliable

Checking the standing wave ratio (SWR) of Check whether SWR alarm is generated. Measure the
the antenna feeder SWR of each antenna feeder. Pay special attention to
connecting the feeder reliably after measuring the SWR

Measuring the ground resistance and check- Measure the ground resistance with a ground resis-
ing the grounding cable tance tester, and check whether the resistance is qual-
ified

Check whether the connector of each grounding cable


is in loose contact or aged

Checking the connector of the antenna Check whether the surface is in good condition. Unfold
feeder and the water resistance, and ground- the insulating tape when necessary. Pay attention to
ing connection of the lightning protection folding the insulating tape again after the check
grounding kit

Checking whether the antenna is firm and Check whether the antenna is beyond the scope re-
checking the pitch angle and directional an- quirement of the network plan due to the wind. Use
gle of the directional antenna the spanner and angle meter to adjust the antenna.
Be careful not to overexert on screwing the nut by the
spanner

Checking the lightning protection Check whether the connection of the lightning protec-
tion grounding cable is reliable, and check the rust re-
sistance of the connection

Other remarks:

3-4

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


Chapter 3 Routine Maintenance

3.7 Semiannual Maintenance Items


Table 3-4 lists the semiannual maintenance items of the ZXSDR B8200 L200.

Table 3-4 Semiannual Maintenance Items

Maintenance Item Description Remarks

Checking the lightning Check the working ground Implement an additional


protection grounding of the equipment. Check check before and after nature
the protective ground of the disaster such as typhoon and
equipment room. Check thunderstorm
the grounding trunk line of the
eNodeB. Check the construction
lightning protection ground. Test
all the ground resistances

3.8 Annual Maintenance Items


Table 3-5 lists the annual maintenance items of the ZXSDR B8200 L200.

Table 3-5 Annual Maintenance Items

Maintenance Item Description

Checking the cleanness and airtightness of Clean the surface of the cabinet with a vacuum cleaner
the cabinet or towel. Pay special attention not to touch the switch
or power by mistake. After opening the cabinet, check
whether there is water in the cabinet and whether the
upper and lower covers of the cabinet are airtight

Checking the temperature and humidity Check the temperature in the alarm management sys-
tem of the OMC. Measure the humidity with a hygrom-
eter

Checking the running status of the module Check the running status of the module in the alarm
management system of the OMC. As for the faulty mod-
ule, check through the diagnostic test system

Checking the voice service and data service Implement the test by using a terminal on the ZXSDR
B8200 L200 site. Observe the service. Survey the ser-
vice condition of each sector. Check whether discon-
nection, interruption, and throughput abnormality exist

Checking the running status of the power Check the power voltage of the ZXSDR B8200 L200
module

Checking the grounding and lightning protec- Check the working status of the grounding and lightning
tion systems protection systems. Check whether the connection is
reliable and whether the discharge arrester is burnt

3-5

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


ZXSDR B8200 L200 Maintenance Guide

Maintenance Item Description

Checking the SWR of the antenna feeder Check whether SWR alarm is generated. Measure the
SWR of each antenna feeder. Pay special attention to
connecting the antenna feeder reliably after measuring
the SWR

Measuring the ground resistance and check- Measure the ground resistance with a ground resis-
ing the grounding cable tance tester, and check whether the resistance is qual-
ified

Check whether the connector of each grounding cable


is in loose contact or aged

Checking the connector of the antenna


feeder and the water resistance, and ground- Check whether the surface is in good condition. Unfold
ing connection of the lightning protection the insulating tape when necessary. Pay attention to
grounding kit folding the insulating tape again after the check

Checking whether the antenna is firm and Check whether the antenna is beyond the scope re-
checking the pitch angle and directional an- quirement of the network plan due to the wind. Use
gle of the directional antenna the spanner and angle meter to adjust the antenna.
Be careful not to overexert on screwing the nut by the
spanner

Checking the lightning protection Check whether the connection of the lightning protec-
tion grounding cable is reliable, and check the rust re-
sistance of the connection point

Other remarks:

3-6

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


Chapter 4
Maintenance Record Table
Table of Contents
Daily Maintenance Record .........................................................................................4-1
Monthly Maintenance Record .....................................................................................4-2
Quarterly Maintenance Record...................................................................................4-3
Semiannual Maintenance Record...............................................................................4-4
Annual Maintenance Record ......................................................................................4-4
Emergency Fault Handling Record .............................................................................4-5
Module Replacement Record .....................................................................................4-6
Cable Replacement Record........................................................................................4-7

4.1 Daily Maintenance Record


Date: Year Month Day

Time on duty: From to Handover from: Handover to:

Current alarm processing record of the eNodeB

eNodeB No. Alarm content Alarm start Alarm end Remarks


time time

Anomaly history alarm record of the eNodeB

eNodeB No. Anomaly alarm content and processing Remarks

Anomaly history notification record of the eNodeB

eNodeB No. Anomaly notice content and processing Remarks

4-1

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


ZXSDR B8200 L200 Maintenance Guide

Subscriber complaint processing

eNodeB No. Complaint content and processing Remarks

Handover content:

Verified by team leader:

4.2 Monthly Maintenance Record


Time: Year Month Day...Hour Service personnel:

Check Item Condition Description Handling Method Remarks

Are the position


parameters of the
eNodeB the same as
the actual position
parameters?

Is the equipment rack


clean?

Is the cable rack firm?

Are the fiber connectors


and other connectors
in good contact?

Are the indicator lights


of the equipment in the
normal state?

Check the temperature


and humidity

Check the voice service


and data service

Check the grounding


and lightening
protection systems

4-2

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


Chapter 4 Maintenance Record Table

Check the spare parts Are the spare parts and □ Yes □ No
and accessories accessories in stock
and in good condition?

Verified by team leader:

4.3 Quarterly Maintenance Record


ZXSDR B8200 L200 Name: Time: Year Month Day

Service personnel:

Maintenance Item Condition Remarks

Is the ZXSDR B8200 L200 □ Yes □ No


module running normally?

Is the data service running □ Yes □ No


normally?

Is the power running normally? □ Yes □ No

Are the grounding and lightning □ Yes □ No


protection systems normal?

Are the ground resistance and □ Yes □ No


grounding wire normal?

Are the connector of the antenna □ Yes □ No


feeder and the water resistance
and grounding connection of the
lightning protection grounding
kit normal?

Is the dustproof assembly of the □ Yes □ No


fan module cleaned?

Fault description and


troubleshooting:

4-3

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


ZXSDR B8200 L200 Maintenance Guide

Outstanding issues:

Verified by team leader:

4.4 Semiannual Maintenance Record


Time: Year Month Day...Hour Service personnel:

Check Item Check Result Remarks

Is the working ground of the □ Yes □ No


equipment connected reliably?

Is the protection ground of the □ Yes □ No


equipment room connected reliably?

Is the grounding trunk line of the □ Yes □ No


eNodeB reliable?

Measure the ground resistance Value:

4.5 Annual Maintenance Record


Equipment name: Time: Year Month Day

Service personnel:

Condition
Check Item Description Remarks

Is the cabinet clean? □ Yes □ No

Are the temperature and humidity normal? □ Yes □ No

Is the module running normally? □ Yes □ No

Are the voice service and data service nor-


mal? □ Yes □ No

Is the power running normally? □ Yes □ No

Are the grounding and lightening protection


systems normal? □ Yes □ No

Is the SWR of the antenna feeder normal? □ Yes □ No

4-4

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


Chapter 4 Maintenance Record Table

Equipment name: Time: Year Month Day

Service personnel:

Condition
Check Item Description Remarks

Are the value of the ground resistance and


grounding cable normal? □ Yes □ No

Are the connector of the antenna feeder and


the water resistance and grounding connec-
tion of the lightening protection grounding kit
normal? □ Yes □ No

Is the antenna firm and are the pitch angle


and directional angle of the directional an-
tenna normal? □ Yes □ No

Is the lightening protection normal? □ Yes □ No

Fault description and troubleshooting:

Outstanding issues:

Verified by team leader:

4.6 Emergency Fault Handling Record


Emergency fault handling record

Site name: Handling person:

Occurrence time: Handling time:

Fault source: □ Customer complaint □ Alarm system □ Found during routine maintenance □ Others

Fault type:

4-5

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


ZXSDR B8200 L200 Maintenance Guide

Emergency fault handling record

Fault description:

Handling method:

Result:

Comment of the person in charge:

4.7 Module Replacement Record


Module replacement record

eNodeB No.: Service personnel:

Module Module Slot Fault Time Replace- SN of the Faulty SN of the


Name ment Time Module Replacement
Module

4-6

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


Chapter 4 Maintenance Record Table

4.8 Cable Replacement Record


Cable replacement record

eNodeB No.: Service personnel:

Cable Name Cable Fault Time Replace- SN of the Faulty SN of the


Connection ment Time Cable Replacement
Position Cable

4-7

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


ZXSDR B8200 L200 Maintenance Guide

4-8

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


Chapter 5
Replacing Boards
Table of Contents
Replacing CC Board...................................................................................................5-1
Replacing FS Board ...................................................................................................5-2
Replacing BPL Board .................................................................................................5-3
Replacing SA Board ...................................................................................................5-4
Replacing FAN Module...............................................................................................5-5
Replacing PM Module ................................................................................................5-5

5.1 Replacing CC Board


Prerequisites
l Wear the antistatic wrist strap.
l Ensure that the types of the new and old modules are the same.

Context
Replacing the control and clock module (CC) may have the following impacts on the
system:
l Two CCs (active/standby) configured for the system
If the board to be replaced is in the active state, remove the active board directly and
the standby board switches over automatically. You can also switch the board to the
standby board before the replacement. The replacement process does not affect the
system and services.

l One CC configured for the system


The system is paralyzed during the board replacement process.

Pay attention to the following precautions when replacing the CC:

l When replacing the CC, pay attention to the CC version and record it in time to prevent
the mismatch or incompatibility of the module with the system.
l Conform with the operation procedure strictly when replacing the CC. This prevents
great impact on the system running due to incorrect operation.
l Test and verify the functions of the new module or system in time after the replacement,
to ensure the replacement success.
l When removing or inserting the fiber, do not contaminate the fibre optic splice.

5-1

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


ZXSDR B8200 L200 Maintenance Guide

l Ensure that the module is in good contact with the slot when inserting the module.
Otherwise, electrical interference may occur during the equipment running or the
module may be damaged.
l When taking the module, wear standard antistatic wrist strap or antistatic gloves. The
grounding end of the antistatic wrist strap should be grounded properly.

Steps
1. Remove the module.
a. Open the lock and pull out the tact switch (namely, the handle) of the module for
two sections.
b. Pull out the module along the guide rails.
2. Insert the module.
a. Insert the module along the guide rails of the subrack.
b. Hold the tact switch on the left of the module and push the module in. Ensure that
the tact switch is in good contact with the lock point of the subrack.

Note:
In the case that the IP address of the eNodeB is obtained in the DHCP mode
automatically, you need to configure the IP address on the DHCP server after
inserting the new module. You need to ensure that the IP address corresponding to
the electronic barcode of the new CC is the same as the IP address corresponding
to the electronic barcode of the old CC. For related operations, contact ZTE techical
support.

– End of Steps –

5.2 Replacing FS Board


Prerequisites
l Wear the antistatic wrist strap.
l Ensure that the types of the new and old modules are the same.

Context
Replacing the FS board affects the system performance. The system in certain coverage
area is paralyzed.
Pay attention to the following precautions when replacing the FS:
l When replacing the FS, pay attention to the FS version and record it in time to prevent
the mismatch or incompatibility of the module with the system.

5-2

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


Chapter 5 Replacing Boards

l Conform with the operation procedure strictly when replacing the FS. This prevents
great impact on the system running due to incorrect operation.
l Test and verify the functions of the new module or system in time after the replacement,
to ensure the replacement success.
l Ensure that the module is in good contact with the slot when inserting the module. Oth-
erwise, electrical interference may occur during the equipment running or the module
may be damaged.
l When taking the module, wear standard antistatic wrist strap or antistatic gloves. The
grounding end of the antistatic wrist strap should be grounded properly.

Steps
1. Remove the module.
a. Open the lock and pull out the tact switch (namely, the handle) of the module for
two sections.
b. Pull out the module along the guide rails.
2. Insert the module.
a. Insert the module along the guide rails of the subrack.
b. Hold the tact switch on the left of the module, and push the module in. Ensure that
the tact switch is in good contact with the lock point of the subrack.
– End of Steps –

5.3 Replacing BPL Board


Prerequisites
l Wear the antistatic wrist strap.
l Ensure that the types of the new and old modules are the same.

Context
Replacing the BPL board affects the system performance. The system in certain coverage
area is paralyzed.

Pay attention to the following precautions when replacing the BPL:


l When replacing the BPL, pay attention to the BPL version and record it in time to
prevent the mismatch or incompatibility of the module with the system.
l Conform with the operation procedure strictly when replacing the BPL. This prevents
great impact on the system running due to incorrect operation.
l Test and verify the functions of the new module or system in time after the replacement,
to ensure the replacement success.
l When replacing the BPL, do not contaminate fiber connector if you need to remove
or insert the fiber.

5-3

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


ZXSDR B8200 L200 Maintenance Guide

l Ensure that the module is in good contact with the slot when inserting the module.
Otherwise, electrical interference may occur during the equipment running or the
module may be damaged.
l When taking the module, wear standard antistatic wrist strap or antistatic gloves. The
grounding end of the antistatic wrist strap should be grounded properly.

Steps
1. Remove the module.
a. Open the lock and pull out the tact switch (namely, the handle) of the module for
two sections.
b. Pull out the module along the guide rails.
2. Insert the module.
a. Insert the module along the guide rails of the subrack.

b. Hold the tact switch on the left of the module, and push the module in. Ensure that
the tact switch is in good contact with the lock point of the subrack.
– End of Steps –

5.4 Replacing SA Board


Prerequisites
l Wear the antistatic wrist strap.
l Ensure that the types of the new and old modules are the same.

Context
Replacing the site alarm module (SA) may have the following impacts on the system:
l The system environment monitoring is terminated.
l The system cannot implement the function of fan speed adjustment.
Pay attention to the following precautions when replacing the SA:
l When replacing the SA, pay attention to the SA version and record it in time to prevent
the mismatch or incompatibility of the module with the system.
l Conform with the operation procedure strictly when replacing the SA. This prevents
great impact on the system running due to incorrect operation.
l Test and verify the functions of the new module or system in time after the replacement,
to ensure the replacement success.
l Ensure that the module is in good contact with the slot when inserting the module.
Otherwise, electrical interference may occur during the equipment running or the
module may be damaged.
l When taking the module, wear standard antistatic wrist strap or antistatic gloves. The
grounding end of the antistatic wrist strap should be grounded properly.

5-4

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


Chapter 5 Replacing Boards

Steps
1. Remove the module.
a. Open the lock and pull out the tact switch (namely, the handle) of the module for
two sections.
b. Pull out the module along the guide rails.
2. Insert the module.
a. Insert the module along the guide rails of the subrack.
b. Hold the tact switch on the left of the module, and push the module in. Ensure that
the tact switch is in good contact with the lock point of the subrack.
– End of Steps –

5.5 Replacing FAN Module


Prerequisites
l Wear the antistatic wrist strap.
l Ensure that the types of the new and old modules are the same.

Context
Replacing the fan module (FA) may have the following impacts on the system:
l If the replacement takes a short time, the system does not reach the over-temperature
protection state. In this case, the system and service are not affected.
l If the replacement takes a long time, the local temperature is very high. In this case,
the system enters the automatic protection (such as automatic poweroff) state.

Steps
1. Remove the module.
Hold the handle of the FA and pull the FA out.
2. Insert the module.
Insert the module along the upper and lower guide rails. Ensure that the clip on the
fan subrack clamps the dustproof assembly tightly. The sound of the locker indicates
that the fan subrack and the dustproof assembly are installed and fixed firmly.
– End of Steps –

5.6 Replacing PM Module


Prerequisites
l Wear the antistatic wrist strap.

5-5

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


ZXSDR B8200 L200 Maintenance Guide

l Ensure that the types of the new and old modules are the same.

Context
Replacing the power module (PM) may have the following impacts on the system:
l Two PMs (load sharing): When you replace one of the PMs, the boards supported by
the PM are powered off. (The order in which the boards are inserted into the shelf
affects the loading of the PMs.)
l One PM: When you replace the PM, the whole system is powered off.
Pay attention to the following precautions when replacing the PM:
l Conform with the operation procedure strictly when replacing the PM. This prevents
great impact on the system running due to incorrect operation.
l Test and verify the functions of the new module or system in time after the replacement
to ensure the replacement success.
l Ensure that the module is in good contact with the slot when inserting the module.
Otherwise, electrical interference may occur during the equipment running or the
module may be damaged.
l When taking the module, wear standard antistatic wrist strap or antistatic gloves. The
grounding end of the antistatic wrist strap should be grounded properly.

Steps
1. Remove the module.
a. Open the lock and pull out the handle of the module.
b. Pull out the module along the guide rails.
2. Insert the module.

a. Insert the module along the guide rails of the subrack.


b. Hold the tact switch on the left of the module, and push the module in. Ensure that
the tact switch is in good contact with the lock point of the subrack.
– End of Steps –

5-6

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


Chapter 6
Replacing Cables
Table of Contents
Replacing SA Cable ...................................................................................................6-1
Replacing S1/X2 Gigabit Ethernet Cable ....................................................................6-4
Replacing S1/X2 Electric Ethernet Cable....................................................................6-6
Replacing Dry Contact Cable .....................................................................................6-7
Replacing GPS receiving Antenna Cable ...................................................................6-8
Replacing Fiber Cable ................................................................................................6-9

6.1 Replacing SA Cable


Prerequisites
l Wear the antistatic wrist strap.
l Ensure that the types of the new and old RS232/RS485 monitoring cables are the
same.

Context
The RS232/RS485 monitoring cable is used to connect the external monitoring
equipment.Figure 6-1 shows the appearance of the cable.

Figure 6-1 RS232/RS485 monitoring cable

The connector at end A is DB9 (M). End A is connected to the DB9 (end B2) of the SA
panel cable.Figure 6-2 shows the appearance of the SA panel cable.

6-1

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


ZXSDR B8200 L200 Maintenance Guide

Figure 6-2 Appearance of the SA panel cable

Steps
1. Ensure that the types of the new and old RS232/RS485 monitoring cables are the
same.
Before the replacement, ensure that the appearances of the new and old cables are
the same. In addition, ensure that the codes of the new and old cables are the same.
2. Make the joint of the new cable.
Table 6-1 lists the signal descriptions of the RS232/RS485 monitoring cable.

6-2

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


Table 6-1 Signal descriptions of the RS232/RS485 monitoring cable
SJ-20110830195539-003|2011-9-15(R1.0)

Signal GNDD RS485_TX+ RS485_TX- GNDD RS485_RX+ RS485_RX- RS232_RXD RS232_TXD GNDD
Definition

Pins at end A 1 6 7 4 8 9 2 3 5

Cable 1 White (White Blue) Green (White Orange)

Pins at end / /
B1

Cable 2 Blue Orange White/white

Pins at end /
B2

• () indicates a twisted pair.


• 1 and 4 are a (white and green) twisted pair.
• Pin2 is the blue core of the (white and blue) twisted pair. Pin3 is the orange core of the (white and orange) twisted pair. Pin5 is connected to the white cores of the
6-3

(white and blue) and (white and orange) twisted pairs.


ZTE Proprietary and Confidential

Chapter 6 Replacing Cables


ZXSDR B8200 L200 Maintenance Guide

3. Remove the old cable.


a. Cut off the cable strap.
b. Disconnect the connector at end A of the old cable.
c. Remove the old cable.
4. Lay the new RS232/RS485 monitoring cable.
a. Lay the new cable according to the cabling direction and line order of the old
cable. When laying the cable, conform with the technique requirement of the cable
binding of the equipment.
b. Insert end A of the new cable into interface B2 of the SA data cable and fix the
new cable.
5. Check the cable replacement result.
Check whether the board related with the replacement cable works normally and
whether the related alarms are generated in the alarm management system.
6. After the replacement, tidy the site.
Dispose the replaced old cable properly, and tidy the site.
– End of Steps –

6.2 Replacing S1/X2 Gigabit Ethernet Cable


Context
The GE communications fiber of the S1/X2 interface is the information transmission
media between the ZXSDR B8200 L200 and other eNodeB/core network. During the
fiber replacement, the communications between the ZXSDR B8200 L200 and other
eNodeB/core network is temporarily interrupted.

Caution!
When replacing the fiber, pay attention to the following precautions :
l Do not break the protection layer of the fiber during the operation.
l Do not contaminate the fiber connector.
l Do not overexert on pulling out the old fiber or binding the new fiber.
l Curve the turning point of the new fiber.

Steps
1. Confirm the type of the new fiber.
Before replacing the fiber, ensure that the types of the new fiber and the old fiber to
be replaced are the same.

6-4

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


Chapter 6 Replacing Cables

2. Paste temporary labels on the new fiber.


Paste temporary labels at two ends of the new fiber to form a matching relation.
Differentiate the fibers by labels if more than one fiber need to be replaced.
3. Lay the new fiber.
The position and cabling mode of the new fiber must be the same as that of the old
fiber to be replaced.
4. Disconnect one connector of the old fiber and connect the connector of the new fiber.

Caution!
l Remove one connector of the old fiber to be replaced, and cover the optical
interface with the protective cap to prevent it being contaminated.
l Insert the connector of the new fiber and ensure that the connector is clamped
firmly.

5. Disconnect the other connector of the old fiber and connect the connector of the new
fiber.
Find the connector at the other end of the old fiber according to the number of the old
fiber and remove the connector. Find the connector at the other end of the new fiber
according to the temporary labels of the new fiber and insert the connector.

Caution!
l Remove one connector of the old fiber to be replaced, and cover the optical
interface with the protective cap to prevent it being contaminated.
l Insert the connector of the new fiber and ensure that the connector is clamped
firmly.

6. Check the fiber replacement result.


Check whether the board related with the replacement fiber works normally and
whether the related alarms are generated in the alarm management system.

7. Bind the new fiber.


Cut off the cable strap, remove the replaced old fiber, and then lay the new fiber. When
binding the fiber, conform with the technique requirement of the equipment and fiber
binding.

8. Paste the engineering labels on the fiber.


Remove the temporary labels and paste the engineering labels on the new fiber. The
contents in the labels of the new fiber should be the same as that of the old fiber.

6-5

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


ZXSDR B8200 L200 Maintenance Guide

9. After the replacement, tidy the site and dispose the replaced old Ethernet cable
properly.
– End of Steps –

6.3 Replacing S1/X2 Electric Ethernet Cable


Prerequisites
l Wear the antistatic wrist strap.
l Ensure that the types of the new and old Ethernet cables are the same.

Context
The electrical Ethernet communications cable of the S1/X2 interface is the information
transmission media between the ZXSDR B8200 L200 and other eNodeB/core network.
During the cable replacement, the communications between the ZXSDR B8200 L200 and
other eNodeB/core network is temporarily interrupted.

Steps
1. Remove the faulty cable.
Pinch the turnup of the cable connector and pull out the cable.
2. Lay the new Ethernet cable and bind the cable.
Cut off the cable strap, remove the replaced old Ethernet cable, and then lay the new
Ethernet cable. When binding the cable, conform with the technique requirement of
the cable binding of the equipment.

3. Install the Ethernet cable. Insert the connector into the cable interface according to
the shape of the cable interface.
4. Check the Ethernet cable replacement result.

Check whether the board related with the replacement Ethernet cable works normally
and whether the related alarms are generated in the alarm management system.
5. Paste the engineering labels on the Ethernet cable.
Paste the engineering labels on the Ethernet cable. The contents in the labels of the
new Ethernet cable should be the same as that of the old Ethernet cable.

6. After the replacement, tidy the site and dispose the replaced old Ethernet cable
properly.
– End of Steps –

6-6

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


Chapter 6 Replacing Cables

6.4 Replacing Dry Contact Cable


Prerequisites
l Wear the antistatic wrist strap.
l Complete installing the SA board and its panel cable.
l Ensure that the types of the new and old dry contact input/output cables are the same.

Context
The input dry contact cable is used to import the dry contact signal of the peripheral
equipment.Figure 6-3 shows the appearance of the cable.

Figure 6-3 Input/Output dry-contact interface cable

End A is connected to the DB25 plug (end B3) of the SA panel cable (supporting four
interfaces).Figure 6-4 shows the appearance of the SA panel cable.

Figure 6-4 Appearance of the SA panel cable

Steps
1. Label the new cable.

Put the same labels on the new cable as the labels on the old cable according to the
terminals and line order.
2. Connect end B of the new cable.

i. Disconnect one connector of end B of the old cable, and connect the cable of the
same line order and color at end B of the new cable.

6-7

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


ZXSDR B8200 L200 Maintenance Guide

ii. Repeat the preceding procedure. Disconnect a connector of an old cable and
connect a connector of a new cable until all the connectors of the new cables are
connected.
3. Remove the old cable.
i. Cut off the cable strap.
ii. Disconnect the connector at end A of the old cable.
iii. Remove the old cable.
4. Lay the new dry contact input/output cable.
i. Lay the new cable according to the cabling direction and line order of the old
cable. When laying the cable, conform with the technique requirement of the cable
binding of the equipment.
ii. Connect end A of the new cable to the SA panel cable and fix it.
5. Check the cable replacement result.
Check whether the board related with the replacement cable works normally and
whether the related alarms are generated in the alarm management system.
6. After the replacement, tidy the site and dispose the replaced old cable properly.
– End of Steps –

6.5 Replacing GPS receiving Antenna Cable


Prerequisites
l Wear the antistatic wrist strap.
l Ensure that the types of the new and old GPS receiver antenna cables are the same.

Context
The GPS receiver antenna cable in the ZXSDR B8200 L200 system is used to import the
GPS antenna signal to the SMA antenna interface of the CC.

Steps
1. Twist off the interface of the cable connected to the GPS antenna feeder.
2. Twist off the interface of the cable connected to the CC.
3. Cut off the cable strap and remove the GPS receiver antenna cable.
4. Connect the corresponding end of the new GPS receiver antenna cable to the interface
of the SMA antenna of the CC.
5. Connect the corresponding end of the new GPS receiver antenna cable to the GPS
antenna feeder.
6. Fix the cable with the cable strap.

6-8

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


Chapter 6 Replacing Cables

7. After the replacement, tidy the site. Dispose the replaced GPS receiver antenna cable
properly and tidy the site.
– End of Steps –

6.6 Replacing Fiber Cable


Context
When replacing the fiber, pay attention to the following precautions:
l Do not break the protection layer of the fiber during the operation.
l Do not contaminate the fiber connector.
l Do not overexert on pulling out the old fiber or binding the new fiber.
l Curve the turning point of the new fiber.

Steps
1. Confirm the type of the new fiber.
Before replacing the fiber, ensure that the types of the new fiber and the old fiber to
be replaced are the same.
2. Paste temporary labels on the new fiber.
Paste temporary labels at two ends of the new fiber to form the matching relation.
Differentiate the fibers by labels in the case that more than one fiber need to be
replaced.
3. Lay the new fiber.

The position and cabling mode of the new fiber must be the same as that of the old
fiber.

4. Disconnect one connector of the old fiber and connect the connector of the new fiber.

Caution!
l Remove one connector of the old fiber to be replaced, and cover the optical
interface with the protective cap to prevent it being contaminated.
l Insert the connector of the new fiber and ensure that the connector is clamped
firmly.

5. Remove the other connector of the old fiber and insert the connector of the new fiber.
Find the connector at the other end of the old fiber according to the number of the old
fiber and remove the connector. Find the connector at the other end of the new fiber
according to the temporary label of the new fiber and insert the connector.

6-9

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


ZXSDR B8200 L200 Maintenance Guide

Caution!
l Remove one connector of the old fiber to be replaced, and cover the optical
interface with the protective cap to prevent it being contaminated.
l Insert the connector of the new fiber and ensure that the connector is clamped
firmly.

6. Check the fiber replacement result.


Check whether the board related with the replacement fiber works normally and
whether the related alarms are generated in the alarm management system.
7. Bind the new fiber.
Cut off the cable strap, remove the replaced old fiber, and then lay the new fiber. When
binding the fiber, conform with the technique requirement of the fiber binding.
8. Paste the engineering labels on the fiber.
Remove the temporary labels on the new fiber and paste the engineering labels on
the fiber. The contents in the labels of the new fiber should be the same as that of the
old fiber.

9. After the replacement, tidy the site.


Dispose the replaced old fiber properly, and tidy the site.
– End of Steps –

6-10

SJ-20110830195539-003|2011-9-15(R1.0) ZTE Proprietary and Confidential


Glossary
CC
- Control and Clock Module
FA
- Fan Array Module
OMC
- Operation & Maintenance Center
PM
- Power Module
SA
- Site Alarm Module

You might also like