You are on page 1of 32

08 71 00 Door Hardware

08 74 00 Access Control
Lock Systems

CAT. NO.
LP10

COMMERCIAL DOOR HANDLES


• Ladder Pull Handles
• Locking Ladder Pull
Handles
• One and Two Point
Center Locks
• Deadbolt Handles
• Panic Handles
• Electronic Egress
Handles
• Center Locks
• Push Pull Handles
• Aluminum Door Handles
• Custom Door Handles

®
ISO 9001:2000 Certified

C.R. LAURENCE COMPANY


crlaurence.com I Worldwide Supplier
CRL LADDER PULLS
For Pricing on CRL Products, Call Toll Free
(800) 421-6144, or Visit crlaurence.com

CRL Straight Style Ladder Pulls


• Eleven Sizes in Two Popular Finishes
for 3/8" to 3/4" (10 to 19 mm) Glass
• Extra Height for Eye-Catching
Contemporary and Elegant Appearance
• 1-1/4" (32 mm) Diameter Heavy Wall
304 Alloy Stainless Steel Tubing
• Custom Finishes and Sizes Available
CRL Ladder Style Pull Handles add elegance and
eye-catching appeal to commercial glass doors. They are
designed for back-to-back mounting with supplied
through-bolts.
Ladder Style Pulls are intended for use with full size glass
doors made from 3/8" to 3/4" (10 to 19 mm) thick
tempered glass. Stock sizes range from 24" to 84" (610
to 2134 mm) overall height. Standard finishes are polished
stainless and brushed stainless.
Custom sizes and finishes are available to meet
architectural specifications. For additional information or
to begin the custom design process, contact CRL Technical
Sales at (800) 421-6144 in the U.S., (877) 421-6144 from
Canada, or (323) 588-1281 International, and ask for Ext.
7700. You can also e-mail us through our web site at
crlaurence.com. From the home page click on Contact Us,
and then click on Technical Sales for Commercial Products.

STRAIGHT STYLE LADDER PULL HANDLES Optional Mid-Posts give extra


strength to very long Ladder Pulls.
MOUNTING HOLES
Must be factory-installed.
CAT. NO. OVERALL LENGTH CENTER-TO-CENTER FINISH Call for details.
24LPPS 24" (610 mm) 12" (305 mm) Polished Stainless
24LPBS 24" (610 mm) 12" (305 mm) Brushed Stainless
30LPPS 30" (762 mm) 18" (457 mm) Polished Stainless Optional Offset
30LPBS 30" (762 mm) 18" (457 mm) Brushed Stainless Mid-Posts are
36LPPS 36" (914 mm) 24" (610 mm) Polished Stainless available to convert
36LPBS 36" (914 mm) 24" (610 mm) Brushed Stainless Straight Style Ladder
Pulls to Offset Mount.
42LPPS 42" (1067 mm) 30" (762 mm) Polished Stainless Two pair per set.
42LPBS 42" (1067 mm) 30" (762 mm) Brushed Stainless Minimum order is
48LPPS 48" (1219 mm) 36" (914 mm) Polished Stainless one set.
48LPBS 48" (1219 mm) 36" (914 mm) Brushed Stainless
54LPPS 54" (1372 mm) 42" (1067 mm) Polished Stainless
54LPBS 54" (1372 mm) 42" (1067 mm) Brushed Stainless
60LPPS 60" (1524 mm) 48" (1219 mm) Polished Stainless
60LPBS 60" (1524 mm) 48" (1219 mm) Brushed Stainless
66LPPS 66" (1676 mm) 54" (1372 mm) Polished Stainless
CAT. NO.
66LPBS 66" (1676 mm) 54" (1372 mm) Brushed Stainless LP0PS
72LPPS 72" (1829 mm) 60" (1524 mm) Polished Stainless Polished Stainless
72LPBS 72" (1829 mm) 60" (1524 mm) Brushed Stainless Offset Mid-Posts
78LPPS 78" (1981 mm) 66" (1676 mm) Polished Stainless
78LPBS 78" (1981 mm) 66" (1676 mm) Brushed Stainless CAT. NO.
84LPPS 84" (2134 mm) 72" (1829 mm) Polished Stainless LP0BS
84LPBS 84" (2134 mm) 72" (1829 mm) Brushed Stainless Brushed Stainless
Top View
Minimum order: 1 each. Sizes and finishes can be combined for quantity pricing. Additional holes required if extra Mid-Posts added (see top right). Offset Mid-Posts
Straight Style Glass Fabrication Required: Two 5/8" (16 mm) Diameter Holes.

L101 A C.R. LAURENCE COMPANY crlaurence.com


CRL LADDER PULLS
For Pricing on CRL Products, Call Toll Free
(800) 421-6144, or Visit crlaurence.com

CRL "S" Style Ladder Pulls


• Three Sizes in Two Popular Finishes for 3/8" to 3/4"
(10 to 19 mm) Glass
• Designer Left and Right Hand Models Available
• 1-1/4" (32 mm) Diameter Heavy Wall
304 Alloy Stainless Steel Tubing
• Custom Finishes and Sizes Available
CRL "S" Style Ladder Style Pull Handles are for back-to-back
mounting with supplied through-bolts.
"S" Style Ladder Style Pulls are intended for use with full size
glass doors made from 3/8" to 3/4" (10 to 19 mm) thick tempered glass.
Stock sizes range from 24" to 48" (610 to 1219 mm) overall height.
Standard finishes are polished stainless and brushed stainless. The
Pulls are handed left and right to ensure the exposed set-screws are
always on the interior side of the door. Handing is determined from the
exterior side looking in.
Custom sizes and finishes are available to meet architectural
specifications. For additional information or to begin the custom design
process, contact CRL Technical Sales at (800) 421-6144 in the U.S.,
(877) 421-6144 from Canada, or (323) 588-1281 International, and
ask for Ext. 7700. You can also e-mail us through our web site at
crlaurence.com. From the home page click on Contact Us, and then
click on Technical Sales for Commercial Products.

"S" STYLE LADDER PULL HANDLES


MOUNTING HOLES
CAT. NO. HANDING * OVERALL LENGTH CENTER-TO-CENTER FINISH
24SLPPS Left Hand 24" (610 mm) 12" (305 mm) Polished Stainless
24SLPBS Left Hand 24" (610 mm) 12" (305 mm) Brushed Stainless
24SRPPS Right Hand 24" (610 mm) 12" (305 mm) Polished Stainless
24SRPBS Right Hand 24" (610 mm) 12" (305 mm) Brushed Stainless
36SLPPS Left Hand 36" (914 mm) 24" (610 mm) Polished Stainless
36SLPBS Left Hand 36" (914 mm) 24" (610 mm) Brushed Stainless
36SRPPS Right Hand 36" (914 mm) 24" (610 mm) Polished Stainless
36SRPBS Right Hand 36" (914 mm) 24" (610 mm) Brushed Stainless
48SLPPS Left Hand 48" (1219 mm) 36" (914 mm) Polished Stainless
48SLPBS Left Hand 48" (1219 mm) 36" (914 mm) Brushed Stainless
48SRPPS Right Hand 48" (1219 mm) 36" (914 mm) Polished Stainless
* Handing determined
"S" Style from the exterior "S" Style 48SRPBS Right Hand 48" (1219 mm) 36" (914 mm) Brushed Stainless
*Left Hand looking in *Right Hand Minimum order: 1 each. Sizes and finishes can be combined for quantity pricing. Glass Fabrication Required: Two 5/8" (16 mm) Diameter Holes.
"S" Style Handles exceeding 48" (1219 mm) overall length must be discussed with CRL Technical Sales to determine proper application.

e-mail: architectural@crlaurence.com I (800) 421-6144 ext. 7700 I Fax (800) 587-7501 L102
CRL LOCKING LADDER PULLS
For Pricing on CRL Products, Call Toll Free
(800) 421-6144, or Visit crlaurence.com

CRL Locking Ladder Pulls


• Locks Operate at a Comfortable Height Above the Floor
new COMFORTABLE
LOCK HEIGHT

• No Kneeling or Bending to Lock or Unlock Doors


• Seven Styles in Stock, Custom Sizes Available
on Special Order
• Made of Durable Alloy 316 Stainless Steel Tubing
• Single and Double Locking Options Available
• 1-1/4" (32 mm) Long Deadbolt - All Units
The newest and most practical option for 'all-glass' entrances is CRL's new Locking
Ladder Pulls. No more kneeling down to unlock the entry doors in the morning, or having to
bend over after a long day at work to reach for the lock at the bottom edge of the door.
Simply turn a key or thumbturn located at a comfortable height above the finished floor to
lock or unlock your doors. CRL Locking Ladder Pulls have a fully concealed deadbolt locking
mechanism with models available that lock into the floor, both floor and head locking, and
Horizontal Pulls that lock into a jamb or sidelite. These Locking Ladder Pulls are intended
for use with glass doors made from 3/8" to 1/2" (10 to 12 mm) thick tempered glass.
For additional information contact CRL Technical Sales (800) 421-6144 in the U.S.,
(877) 421-6144 from Canada, or (323) 588-1281 International, and ask for Ext. 7700.
You can also send e-mail from the crlaurence.com home page. Click on Contact Us,
and then click on Technical Sales for Commercial Products.

Vertical Double Locking Ladder Pulls

Horizontal Locking Ladder Pulls

Vertical Double Locking


Ladder Pulls Vertical Floor Locking Ladder Pulls

L103 A C.R. LAURENCE COMPANY crlaurence.com


CRL LOCKING LADDER PULLS
For Pricing on CRL Products, Call Toll Free
(800) 421-6144, or Visit crlaurence.com

CRL 53" Locking Ladder Pulls


• Lock Operates at a Comfortable 47-1/4"
new COMFORTABLE
LOCK HEIGHT

(1200 mm) Above the Floor


• Available in Brushed Stainless
or With Black Leather Wrapped Handle*
• 1" (25 mm) Diameter Alloy 316
Stainless Steel Tubing
Our new 53" (1346 mm) Locking Ladder Pulls have a fully concealed
deadbolt locking mechanism that is operated at 47-1/4" (1200 mm) above the
floor. No need to bend, simply turn a key or thumbturn located at a comfortable
height above the finished floor to lock or unlock your doors. These Locking
Ladder Pulls are intended for use with glass doors made from 3/8" to 1/2"
(10 to 12 mm) thick tempered glass. They lock into the floor only, and are
available in brushed stainless steel, or for a truly unique look, black leather
wrapped handle over brushed stainless steel. One Cat. No. 58DKBS Dustproof
Keeper is included with each Locking Ladder Pull. Key Cylinder Cores are sold
separately (see page L110). NOTE: Glass fabrication is required. Please visit
crlaurence.com for details. For Push/Pull Indicators in complementary finishes
please visit crlaurence.com.

Interior Installation With Black Leather Wrapped Locking Ladder Pull Handles

1" (25 mm)


dia.

1" (25 mm)


dia.
11-1/16"
(281 mm)

* Leather Wrapped
Handles are
for Interior
Applications Easy to Operate Designer Thumbturn
Only 53"
(1346 mm)
43-7/16"
30-3/16" (1103 mm)
(767 mm)

Floor Locking Only 6" (152 mm)

*CAT. NO. LLP053LBS CAT. NO. LLP053BS 7-Pin Small Format Interchangeable Cores (SFIC)
Brushed Stainless Steel Brushed Stainless Steel for easy re-keying of handles. See page L110 for
Locking Ladder Pull Handle Locking Ladder 2-7/16" additional information on Cylinder Cores
with Black Leather Wrap Pull Handle CL (62 mm) sold separately.

e-mail: architectural@crlaurence.com I (800) 421-6144 ext. 7700 I Fax (800) 587-7501 L104
CRL LOCKING LADDER PULLS
For Pricing on CRL Products, Call Toll Free
(800) 421-6144, or Visit crlaurence.com

CRL 59" Locking Ladder Pull


• Lock Operates at a Comfortable 47-1/4"
new
(1200 mm) Above the Floor
• Locks Into the Floor
• 1-3/8" (35 mm) Diameter Alloy 316
Brushed Stainless Steel Tubing
Our new Locking Ladder Pulls have a fully concealed deadbolt locking COMFORTABLE
LOCK HEIGHT
mechanism that is operated at 47-1/4" (1200 mm) above the floor. No need
to bend, simply turn a key or thumbturn located at a comfortable height above
the finished floor to lock or unlock your doors. These Locking Ladder Pulls are
intended for use with glass doors made from 3/8" to 1/2" (10 to 12 mm) thick
tempered glass. They lock into the floor only, and are available in brushed
stainless steel. One Cat. No. 58DKBS Dustproof Keeper is included with each
Locking Ladder Pull. Key Cylinder Cores are sold separately (see page L110).
NOTE: Glass fabrication is required. Please visit crlaurence.com for details.
For Push/Pull Indicators in complementary finishes please visit crlaurence.com.

1-3/8"
(35 mm)
dia.

59"
(1499 mm)

Double Door Installations Require Two Locking Handles


41-1/4"
(1048 mm)

Floor
Locking
Only
6" (152 mm)

CAT. NO. LLP059BS


Brushed Stainless Steel 2-11/16" Easy to Operate Designer 7-Pin Small Format Interchangeable Cores (SFIC) for easy re-keying
Locking Ladder Pull Handle CL Thumbturn of handles. See page L110 for additional information on
(69 mm) Cylinder Cores sold separately.

L105 A C.R. LAURENCE COMPANY crlaurence.com


CRL LOCKING LADDER PULLS
For Pricing on CRL Products, Call Toll Free
(800) 421-6144, or Visit crlaurence.com

CRL 84" Double Locking Ladder Pull


• Top and Bottom Double Locking Ladder Pull Handle
new CAT. NO. LPK1BS
1-3/8" (35 mm) Diameter
Brushed Stainless
• Lock Operates at a Comfortable 47-1/4" (1200 mm) Ladder Keeper
Above the Floor (see page L110 for more options)

• 1-3/8" (35 mm) Diameter Alloy 316 Brushed


Stainless Steel Tubing 1-3/8" (35 mm)
Our new Double Locking Ladder Pulls have a fully concealed deadbolt COMFORTABLE
locking mechanism that is operated at 47-1/4" (1200 mm) above the floor. LOCK HEIGHT

No need to bend, simply turn a key or thumbturn located at a comfortable


height above the finished floor to lock or unlock your doors. These Locking
Ladder Pulls are intended for use with glass doors made from 3/8" to 1/2" 7-15/16" 3-15/16"
(100 mm)
(10 to 12 mm) thick tempered glass. They lock both at the header or transom (202 mm)
2" (51 mm)
and floor for ultimate security. Available in brushed stainless steel. Two Cat.
No. 58DKBS Dustproof Keepers are included with each Locking Ladder Pull.
Optional Ladder Keepers for glass transoms are available separately (see top 1-3/8"
right). Key Cylinder Cores are sold separately (see page L110). NOTE: Glass (35 mm) dia.
fabrication is required. Please visit crlaurence.com for details. For Push/Pull
Indicators in complementary finishes please visit crlaurence.com.
6" (152 mm)

30-3/4"
(781 mm)
Double
Locking
Top and
Bottom

84"
(2134 mm)

Double Door Installations Require Two Locking Handles


41-1/4"
(1048 mm)

6" (152 mm)

CL
2-11/16"(69 mm)

Easy to Operate Designer 7-Pin Small Format Interchangeable Cores (SFIC) for easy re-keying CAT. NO. LLP084BS
Thumbturn of handles. See page L110 for additional information on Brushed Stainless Steel Double
Cylinder Cores sold separately. Locking Ladder Pull Handle

e-mail: architectural@crlaurence.com I (800) 421-6144 ext. 7700 I Fax (800) 587-7501 L106
CRL LOCKING LADDER PULLS
For Pricing on CRL Products, Call Toll Free
(800) 421-6144, or Visit crlaurence.com

CRL 55" Triangular Locking Ladder Pulls


• New Triangular Design Locks at Floor Only
new COMFORTABLE
LOCK HEIGHT

• Left and Right Hand Models for Single


and Double Doors
• 1" (25 mm) Diameter Alloy 316 Brushed
Stainless Steel Tubing
Our new Triangular Locking Ladder Pulls have a fully concealed deadbolt locking mechanism
that is operated at 43-5/16" (1100 mm) above the floor. No need to bend, simply turn a key or
thumbturn located at a comfortable height above the finished floor to lock or unlock your doors.
These Locking Ladder Pulls are intended for use with glass doors made from 3/8" to 1/2" (10 to
12 mm) thick tempered glass. They lock into the floor only, and are available in brushed stainless
steel. One Cat. No. 58DKBS Dustproof Keeper is included with each Locking Ladder Pull. Key
Cylinder Cores are sold separately (see page L110). NOTE: Glass fabrication is required. Please
visit crlaurence.com for details. For Push/Pull Indicators in complementary finishes please visit
crlaurence.com.

1"
(25 mm)
dia.
Single Door Installation With Right Hand Locking Handle

7-7/8"
(200 mm)

55"
(1397 mm)
37-5/16"
(948 mm)

Easy to Operate Designer Thumbturn

Floor
Locking
Only 6" (152 mm)

CAT. NO. LLP055TLBS CAT. VIEW


NO. LLP055TRBS CL
2-7/16"
(62 mm)
* Left Hand Triangular Locking * Right Hand Triangular Locking 7-Pin Small Format Interchangeable Cores (SFIC)
Ladder Pull Handle Ladder Pull Handle for easy re-keying of handles. See page L110 for
additional information on Cylinder Cores
* Handing is determined from the exterior looking in sold separately.

L107 A C.R. LAURENCE COMPANY crlaurence.com


CRL LOCKING LADDER PULLS
For Pricing on CRL Products, Call Toll Free
(800) 421-6144, or Visit crlaurence.com

CRL 84" Triangular Double Locking Ladder Pulls CAT. NO.


• New Triangular Design Locks at Both Top and Bottom LPK4BS
1" (25 mm) Diameter
• Left and Right Hand Models for Single and Double Doors Brushed Stainless
Ladder Keeper
• 1" (25 mm) Diameter Alloy 316 Brushed Stainless 1-3/8"
Steel Tubing (35 mm)
dia.
Our new Triangular Locking Ladder Pulls have a fully concealed deadbolt locking
mechanism that is operated at 43-5/16" (1100 mm) above the floor. No need to bend,
simply turn a key or thumbturn located at a comfortable height above the finished floor to 7-15/16" 3-15/16"
(100 mm)
lock or unlock your doors. These Locking Ladder Pulls are intended for use with glass (202 mm)
2" (51 mm)
doors made from 3/8" to 1/2" (10 to 12 mm) thick tempered glass. They lock both at the
header or transom and floor for ultimate security. Available in brushed stainless steel.
Two Cat. No. 58DKBS Dustproof Keepers are included with each Locking Ladder Pull. 2"
3-15/16"
Keepers for glass transoms are available separately (see top right). Key Cylinder Cores (100 mm) (51 mm)
are sold separately (see page L110). NOTE: Glass fabrication is required. Please visit
crlaurence.com for details. For Push/Pull Indicators in complementary finishes please 6"
visit crlaurence.com. (152 mm)

new COMFORTABLE
LOCK HEIGHT

26-13/16"
(681 mm)

Double 84"
Locking (2134 mm)
Top and
Bottom

7-7/8"
(200 mm)

7-7/8"
(200 mm)

43-5/16"
(1100 mm)
Double Door Installations Require One Left Single Door Installations
and One Right Hand Locking Handle Require One Left or Right
Handed Locking Handle
29-7/16"
(748 mm)

6"
(152 mm)

C
2-7/16" (62 mm) L

Easy to Operate Designer Thumbturn 7-Pin Small Format Interchangeable Cores (SFIC)
CAT. NO. LLP084TLBS CAT. NO. LLP084TRBS
* Left Hand Brushed Stainless Triangular * Right Hand Brushed Stainless Triangular
for easy re-keying of handles. See page L110 for Double Locking Ladder Pull Handle Double Locking Ladder Pull Handle
additional information on Cylinder Cores
sold separately. * Handing is determined from the exterior looking in

e-mail: architectural@crlaurence.com I (800) 421-6144 ext. 7700 I Fax (800) 587-7501 L108
CRL LOCKING LADDER PULLS
For Pricing on CRL Products, Call Toll Free
(800) 421-6144, or Visit crlaurence.com

CRL 24" Horizontal Locking new


Ladder Pull and Keeper
• Horizontal Locking Ladder Pull Handle COMFORTABLE

for Contemporary Look LOCK HEIGHT

• For Double and Single Doors


• 1" (25 mm) Diameter Alloy 316 Brushed
Stainless Steel Tubing
Our new Horizontal Locking Ladder Pull will give your 3/8" to 1/2" (10 to 12 mm) tempered
glass doors a contemporary look. They have a fully concealed deadbolt locking mechanism that
locks into a complementary Horizontal Keeper for double door or single door with fixed glass
panel installations. On single door installations the concealed locking mechanism engages into
a Dustproof Keeper on the wall. No need to bend, simply turn key or thumbturn located at a
comfortable height above the finished floor to lock or unlock your doors. These Horizontal
Locking Ladder Pulls are available in brushed stainless steel. One Cat. No. 58DKBS Dustproof
Keeper is included with each Locking Ladder Pull. Matching Horizontal Keeper Ladder Pull
Handles are sold separately (see below). Key Cylinder Cores are sold separately (see page
L110).
NOTE: Glass fabrication is required. Please visit crlaurence.com for details. Placement of pulls
in relation to vertical edge of door is critical and dependent upon application, handing of doors
and jamb conditions. For Push/Pull Indicators in complementary finishes please visit
crlaurence.com.

CAT. NO. LLP024BS CAT. NO. LPK3BS


Brushed Stainless Steel Horizontal Locking Ladder Pull Handle Brushed Stainless Steel Horizontal Keeper Ladder Pull Handle

3-11/16" (93 mm) 4-5/8" (117 mm)

23-5/8" 23-5/8"
(600 mm) (600 mm)

1" (25 mm)


dia. 9-3/8" 13-1/16"
(238 mm) (331 mm)
CL
2-7/16"
(62 mm)

Easy to Operate Designer Thumbturn


1" (25 mm) 17-5/16" 21-3/4"
dia. (440 mm) (553 mm)

Double Door Installations


Require One Locking Handle
and One Keeper Handle, 7-Pin Small Format Interchangeable
as well as a Bottom Patch Cores (SFIC) for easy re-keying of
Lock Installed on the Inactive Single Door Installations handles. See page L110 for
Leaf to Properly Secure Require One Locking additional information on Cylinder
the Pair of Doors Handle and a Dustproof Keeper Cores sold separately.

L109 A C.R. LAURENCE COMPANY crlaurence.com


CRL LOCKING LADDER PULL ACCESSORIES
For Pricing on CRL Products, Call Toll Free
(800) 421-6144, or Visit crlaurence.com

CRL 1-3/8" (35 mm) Ladder Keeper CRL 1" (25 mm) Ladder Keeper
• 1-3/8" (35 mm) Diameter • 1" (25 mm) Diameter Alloy
Alloy 316 Brushed Stainless 316 Brushed Stainless
Steel Tubing Steel Tubing
new new
This Ladder Keeper is designed to work This Ladder Keeper is designed to
with Cat. No. LLP084BS Locking Ladder work with Cat. No.'s LLP084TLBS,
Pulls only when used with a glass transom. 7-15/16"
LLP084TRBS, and LLP024BS Locking 7-15/16"
Intended for use with 3/8" to 1/2" (10 to 12 (202 mm) Ladder Pulls only when used with a glass (202 mm)
mm) tempered glass. Brushed stainless transom or sidelite. Intended for use with
steel finish to complement the Locking 3/8" to 1/2" (10 to 12 mm) tempered
Ladder Pulls. See page L106 for glass. Brushed stainless steel finish to
dimensions. Please visit crlaurence.com complement the Locking Ladder Pulls.
for information on Cat. No. USW10 See page L108 for dimensions. Please
Universal Spanner Wrench. Minimum visit crlaurence.com for information on
order is one each. Cat. No. USW10 Universal Spanner
Wrench. Minimum order is one each.
CAT. NO. LPK1BS CAT. NO. LPK4BS

CRL 1-3/8" (35 mm) Single Hole Keeper CRL Dustproof Keeper
Spring-loaded
• 1-3/8" (35 mm) Diameter new • For CRL Locking new Dust Cap
Alloy 316 Brushed Stainless Ladder Pulls
Steel Tubing • Accepts 5/8"
This Keeper only requires a single (16 mm) Throw Bolt
hole in the glass. It is designed to
work with Cat. No. LLP084BS
• Alloy 316 Brushed
Locking Ladder Pulls only when used 2-5/8" Stainless Steel
with a glass transom. Intended for (67 mm)
use with 3/8" to 1/2" (10 to 12 mm) Our new Dustproof Keeper is
tempered glass. Brushed stainless intended to work with all CRL Locking
steel finish to complement the Ladder Pulls with a concealed
Locking Ladder Pulls. Please visit deadbolt locking mechanism. Brushed
crlaurence.com for information stainless steel finish. Requires a hole
on Cat. No. USW10 Universal 1" (25 mm) in diameter by 1-7/8"
Spanner Wrench. Minimum (48 mm) deep. Minimum order
order is one each. CAT. NO. LPK2BS is one each. CAT. NO. 58DKBS

CRL Small Format Interchangeable Cores Core

• 7-Pin Re-Keyable new


• For All CRL Locking Ladder Pulls
• Key Alike Your Whole Project
• Ten Different Keys Available
All CRL Locking Ladder Pull Handles are designed to accept Lock
Housing
our new 7-Pin Small Format Interchangeable Cores. Each Core is Control
sold separate from the Locking Ladder Pull Handle and is easy to Key
install. Simply insert the supplied Control Key into the Core and
rotate it 15 degrees clockwise. Then insert the Core into the
Handle's Lock Housing and turn the Control Key back 15 degrees
CAT. NO. KEY NUMBER CAT. NO. KEY NUMBER
to the original starting point. Remove the Control Key and you're
1C01 1 1C06 6
done, it's that easy. 1C02 2 1C07 7
Choose from ten different key numbers to ensure that your 1C03 3 1C08 8
whole project is either keyed alike or keyed differently. Brushed 1C04 4 1C09 9
stainless steel finish to complement the lock housing. Each Core 1C05 5 1C10 10
comes with one Control Key and two Regular Keys. Minimum order: 1 each. Minimum order: 1 each.

e-mail: architectural@crlaurence.com I (800) 421-6144 ext. 7700 I Fax (800) 587-7501 L110
CRL ONE AND TWO POINT CENTER LOCKS
For Pricing on CRL Products, Call Toll Free
(800) 421-6144, or Visit crlaurence.com

CRL One and Two Point Center Locks


With Bottom Rail Extension Rod Throw
new COMFORTABLE
LOCK HEIGHT

• Lets You Lock Doors at a Comfortable Height


• Secures Your 'All-Glass' Doors Better MANUFACTURED IN THE USA
BY C.R. LAURENCE
An ISO9001:2000 Certified Company

Than Ever Before Patent Pending


• One and Two Point Locking Options Available
We have expanded our Center Lock line by adding a new series of 4" x 10" Center Lock and
Center Lock Glass Keepers that allow you to secure your 'all-glass' doors easier than ever before.
This innovative new series allows for one point and two point locking of 'all-glass' doors.
Unlike previous two point locking applications that force you to reach for the bottom rail of the
door, our system allows you to operate the lock at a comfortable 36" to 42" (914 to 1067 mm)
above the floor. No more bending or kneeling. Simply turn the key or thumbturn found on the
Center Lock and your door is locked into the floor (one point), or locked into the floor and jamb
or Glass Mounted Keeper (two points).
For additional information or assistance in choosing the right Center Lock for your application,
contact CRL Technical Sales at (800) 421-6144 in the U.S., (877) 421-6144 from Canada,
or (323) 588-1281 International, and ask for Ext. 7700. You can also send e-mail from the CRL Two Point Center Lock with Optional DEK4102 Series Glass Keeper
crlaurence.com home page. Click on Contact Us, and then click on Technical Sales for
Commercial Products.

With
CRL One Point Center Lock With
Bottom Rail Extension Rod Throw
new No Handle "D" Handle

• Available With or Without Back-to-Back "D" Handle


• Completely Fabricated and Ready to Install
• Available in Five Standard Architectural Finishes
• Custom Finishes Available on Special Order
• For 1/2" (12 mm) Tempered Glass
Glass Cut-Out
This 4" x 10" Center Lock has an extended throw that latches through the bottom door Required
rail and into the floor. It is completely activated at a comfortable distance above the floor
utilizing a built-in Adams Rite 1860-02 Lock with a modified extension rod allowing the throw
to enter the floor. A small edge channel that travels down from the Center Lock to the
bottom rail conceals the extension rod. The Center Lock is non-handed, with a Thumbturn
for the inside, and a Keyed Cylinder for the outside. You can order them with or without
an 8" (203 mm) back-to-back "D" Handle.
One Point
ORDERING NOTE: This innovative system is intended for the fabrication of new doors Locking
only. Retrofit applications are not recommended because the bottom door rail must be System
factory-modified to accept the Extension Rod Throw, and the door glass requires a specially
shaped cut-out to accept the Center Lock. Please contact Commercial Products Technical
Sales for ordering assistance.

NOTE: In applications where A.D.A. Codes are a concern, a 10" (254 mm)
tall bottom rail should be used with this Center Lock.

NO HANDLE WITH "D" HANDLE


CAT. NO. CAT. NO. FINISH
DE4100BS DE4101BS Brushed Stainless
DE4100PS DE4101PS Polished Stainless
DE4100PB DE4101PB Polished Brass
DE4100SC DE4101SC Satin Anodized
DE4100DU DE4101DU Black Bronze Anodized
Minimum order: 1 each. All Center Locks can be combined for quantity pricing.

L111 A C.R. LAURENCE COMPANY crlaurence.com


CRL ONE AND TWO POINT CENTER LOCKS
For Pricing on CRL Products, Call Toll Free
(800) 421-6144, or Visit crlaurence.com

CRL Two Point Center Lock With COMFORTABLE


Bottom Rail Extension Rod Throw LOCK HEIGHT

• Completely Fabricated and Ready to Install




Available in Five Standard Architectural Finishes
Custom Finishes Available on Special Order
new
• For 1/2" (12 mm) Tempered Glass
This 4" x 10" Center Lock has two throws, an extended throw that latches through the bottom door Two Point
rail into the floor, and a horizontal throw that latches into the jamb or adjacent Glass Mount Keeper (sold Locking
separately, see crlaurence.com). It is completely activated at a comfortable distance above the floor System
utilizing a built-in Adams Rite 1860-02 Lock with a modified extension rod allowing the throw to enter the
floor. A small edge channel that travels down from the Center Lock to the bottom rail conceals the
extension rod. It includes an 8" (203 mm) back-to-back "D" Handle, a Thumbturn on the inside, and a
Keyed Cylinder on the outside. 'No handle' option available on special order.

ORDERING NOTE: This innovative system is intended for the fabrication of new doors only. Retrofit Glass Cut-Out
applications are not recommended because the bottom door rail must be factory-modified to accept the Required
Extension Rod Throw, and the door glass requires a specially shaped cut-out to accept the Center Lock.
Please contact Commercial Products Technical Sales for ordering assistance.
NOTE: In applications where A.D.A. Codes are a concern, a 10" (254 mm)
tall bottom rail should be used with this Center Lock.
CAT. NO. HANDING FINISH
DE4102BS Non-Handed Brushed Stainless
DE4102PS Non-Handed Polished Stainless
DE4102PB Non-Handed Polished Brass MANUFACTURED IN THE USA
BY C.R. LAURENCE
DE4102SC Non-Handed Satin Anodized An ISO9001:2000 Certified Company

DE4102DU Non-Handed Black Bronze Anodized Patent Pending


Minimum order: 1 each. All Center Locks can be combined for quantity pricing.

CRL One Point Center Lock Plus Keeper COMFORTABLE


With Bottom Rail Extension Rod Throw LOCK HEIGHT

• Perfect Solution for Double Doors


Keeper
• Available in Five Standard Architectural Finishes
• Completely Fabricated and Ready to Install new
• For 1/2" (12 mm) Tempered Glass
This 4" x 10" Center Lock has an extended throw that latches through the bottom door rail into the
floor, and a strike for the horizontal throw from adjacent Center Lock (sold separately, see above). It is
completely activated at a comfortable distance above the floor utilizing a built-in Adams Rite 1860-02
Lock with a modified extension rod allowing the throw to enter the floor. A small edge channel that
travels down from the Center Lock to the bottom rail conceals the extension rod. It includes an 8"
(203 mm) back-to-back "D" Handle, a Thumbturn on the inside, and a Keyed Cylinder on the outside.
'No handle' option available on special order.
Glass Cut-Out
Required
ORDERING NOTE: This innovative system is intended for the fabrication of new doors only. Retrofit
applications are not recommended because the bottom door rail must be factory-modified to accept the
Extension Rod Throw, and the door glass requires a specially shaped cut-out to accept the Center Lock.
Please contact Commercial Products Technical Sales for ordering assistance.
NOTE: In applications where A.D.A. Codes are a concern, a 10" (254 mm)
tall bottom rail should be used with this Center Lock.
One
CAT. NO. HANDING FINISH
Point
DE4103BS Non-Handed Brushed Stainless Locking
DE4103PS Non-Handed Polished Stainless System
DE4103PB Non-Handed Polished Brass MANUFACTURED IN THE USA
BY C.R. LAURENCE
DE4103SC Non-Handed Satin Anodized An ISO9001:2000 Certified Company

DE4103DU Non-Handed Black Bronze Anodized Patent Pending


Minimum order: 1 each. All Center Locks can be combined for quantity pricing.

e-mail: architectural@crlaurence.com I (800) 421-6144 ext. 7700 I Fax (800) 587-7501 L112
CRL ACCESS CONTROL HANDLES
For Pricing on CRL Products, Call Toll Free
(800) 421-6144, or Visit crlaurence.com

CRL Deadbolt Handles COMFORTABLE


• Key or Thumbturn Activated Deadbolt LOCK HEIGHT

• UL Classified, ANSI Certified


• For 1/2" or 3/4" (12 or 19 mm) Tempered Glass Doors
• Wide Selection of Exterior Fixed Handles BY C.R. LAURENCE
MANUFACTURED IN THE USA

• Available in Top Locking Only, Bottom Locking Only, An ISO9001:2000 Certified Company

or Both Top and Bottom Locking


• Available in Polished and Brushed Stainless,
Satin and Polished Brass, and Oil Rubbed Bronze
• Custom Finishes Available By Special Order
• Custom Sizes Ship Within One to Two Weeks
• Models for Aluminum or Wood Doors Available on Special Order
CRL manufactures a complete line of Deadbolt Handles designed to offer easily accessible locking
hardware for 'all-glass' doors in an elegant tubular device, while maximizing your viewing area. Our
Deadbolt Handles add a contemporary look to any 1/2" or 3/4" (12 or 19 mm) tempered glass door.
The interior portion of the device is a slender 1-1/4" (32 mm) tube. The locking hardware is
completely concealed within the tube. The top deadbolt retracts with just a simple turn of a key or
thumbturn conveniently located at a comfortable height above the finished floor. To complement the
sleek interior look, we offer a variety of exterior pull handles that can be as simple as a horizontal handle
or one that mirrors the interior device.
All top locking Deadbolt Handles can be used in conjunction with an Electric Strike, allowing for
remote keyless entry. For your convenience, Custom Headers are available with all strike hardware
installed.
Where A.D.A. Codes are not a concern, we offer our bottom locking Deadbolt Handles. These
Deadbolts are of the same sleek design as the top locking Deadbolt Handles, except they Latch at the
bottom of the door into the floor or threshold. Strikes are available for either threshold or no threshold
applications, providing secure, accurate engagement of the deadbolt with every closing.
All of our Deadbolt Handles go through rigorous testing before they leave our manufacturing facility,
ensuring that a high quality, dependable Deadbolt Handle is installed every time. Most importantly,
they are all UL Classified to ANSI A156.16-1997 Standard. For more information on Deadbolt Handles,
please visit our web site at crlaurence.com.

DEADBOLT DB130 DEADBOLT DB131 DEADBOLT DB132 DEADBOLT DB160 DEADBOLT DB170 DEADBOLT DB150 DEADBOLT DB140
Locks at top only Locks at bottom only Locks at top and Locks at top only Locks at top only Locks at bottom only Locks at bottom only
bottom
MaXIMUM DOOR HEIGHTS: SpEcIfIcaTIONS:
Exterior - 96" (2.44 m) for 1/2" (12 mm) Glass Thickness Material: 1-1/4" (32 mm) Diameter Brass or Stainless Steel Tubing (1.5 mm thick)
- 102" (2.59 m) for 3/4" (19 mm) Glass Thickness Glass Thicknesses: 1/2" (12 mm) or 3/4" (19 mm)
Interior - 102" (2.59 m) for 1/2" (12 mm) Glass Thickness Glass fabrication: Please contact CRL Technical Sales
- 108" (2.74 m) for 3/4" (19 mm) Glass Thickness certification: UL Classified
Exception - When using "F" Style Exterior Handle ANSI A156.16-1997
- 108" (2.74 m) for either 1/2" or 3/4"
(12 or 19 mm) Glass Thickness

Contact CRL Technical Sales at (800) 421-6144 in the U.S., (877) 421-6144 from Canada, or (323) 588-1281 International, and ask for Ext. 7700.
You can also send e-mail from the crlaurence.com home page. Click on Contact Us, and then click on Technical Sales for Commercial Products.

L113 A C.R. LAURENCE COMPANY crlaurence.com


CRL ACCESS CONTROL HANDLES
For Pricing on CRL Products, Call Toll Free
(800) 421-6144, or Visit crlaurence.com

CRL Top Locking Deadbolt Handle Details

Keyed Access – Cylinder Out / Thumbturn In


Glass Mount Detail at Latch Rail Mount Detail at Latch (With Removable Core)

Glass Mount Detail at Latch With Header and Hole for Latch Rail Mount Detail at Latch With Header and PK Strike Glass Mount Detail at Latch With Header and ESK Strike

CRL Bottom Locking Deadbolt Handle Details

Keyed Access – Cylinder Out / Cylinder In


Glass Mount Detail at Latch Rail Mount Detail at Latch (With Removable Core)

Glass Mount Detail at Latch With Threshold Rail Mount Detail at Latch at Floor With Glass Mount Detail at Latch at Floor
Prepped for Latch AMR209PS Dustproof Keeper With 777SP Flat Strike
Contact CRL Technical Sales at (800) 421-6144 in the U.S., (877) 421-6144 from Canada, or (323) 588-1281 International, and ask for Ext. 7700.
You can also send e-mail from the crlaurence.com home page. Click on Contact Us, and then click on Technical Sales for Commercial Products.

e-mail: architectural@crlaurence.com I (800) 421-6144 ext. 7700 I Fax (800) 587-7501 L114
CRL ACCESS CONTROL HANDLES
For Pricing on CRL Products, Call Toll Free
(800) 421-6144, or Visit crlaurence.com

CRL Panic Handles


• Manually Operated Roller Latch Bolt
• UL, ULC, and ANSI/BHMA Certified
• For 1/2" or 3/4" (12 or 19 mm) Tempered Glass Doors MANUFACTURED IN THE USA
BY C.R. LAURENCE
An ISO9001:2000 Certified Company

• Wide Selection of Exterior Fixed Handles


• Available in Polished and Brushed Stainless,
Satin and Polished Brass, and Oil Rubbed Bronze
• Custom Finishes Available By Special Order
• Custom Sizes Ship Within One to Two Weeks
• Models for Aluminum or Wood Doors Available
on Special Order
CRL manufactures a complete line of Panic Handles designed with the 'all-glass' door in mind.
These elegant tubular devices give you maximum viewing area and a contemporary look when
used on 1/2" or 3/4" (12 or 19 mm) tempered glass doors. The most popular of these Panics is
our PA100 Series. They provide a solution to the strict Americans With Disabilities Act (A.D.A.)
Codes that confront every manufacturer and installer of 'all-glass' doors.
The interior portion of the device is a slender 1-1/4" (32 mm) tube stretching across the door
and then gently turning upwards to the top of the door, eliminating any interference at the lower
half of the door, which must remain clear of obstructions to pass A.D.A. demands. The operating mechanism is completely concealed within the tube,
and retracts a roller latch bolt at the top of the door when pushed gently. Complementing the sleek interior look, we offer a large selection of exterior pull
handles that can be as simple as a horizontal handle (Model PA100A) to one that mirrors the interior device (Model PA100D).
All PA100 Series Panic Handles come with a 'dogging' feature that allows you to lock the device in the open position by simply sliding a lever, giving free
access during business hours. They also can be used in conjunction with an Electric Strike, allowing for remote keyless entry. For your convenience,
Custom Headers are available with all strike hardware installed.
When A.D.A. Codes are not a concern, we also offer our PA110 Series Panic Handles. These Panics are of the same sleek design as the PA100 Series,
except they stretch across the door and then bend downward to the bottom of the door, latching at the floor or threshold. They operate just like the PA100
Series Panics, and have the same 'dogging' feature. Strikes are available for either threshold or no threshold applications providing secure, accurate latching
every time.
All of our PA100 and PA110 Panic Handles go through rigorous testing before they leave our manufacturing facility, ensuring that a high quality,
dependable Panic will serve your customer for years to come. Most importantly, they are all UL305, ULC/5132-93, and ANSI/BHMA A156.3-2001, Grade 1
Certified. For more information on Panic Handles, please visit our web site at crlaurence.com.

MaXIMUM DOOR HEIGHTS:


Exterior - 96" (2.44 m) for 1/2" (12 mm) Glass Thickness
- 102" (2.59 m) for 3/4" (19 mm) Glass Thickness
Interior - 102" (2.59 m) for 1/2" (12 mm) Glass Thickness
- 108" (2.74 m) for 3/4" (19 mm) Glass Thickness
Exception - When using "F" Style Exterior Handle
- 108" (2.74 m) for either 1/2" or 3/4"
(12 or 19 mm) Glass Thickness

SpEcIfIcaTIONS:
Material: 1-1/4" (32 mm) Diameter Brass or Stainless
Steel Tubing (1.5 mm thick)
Glass Thicknesses: 1/2" (12 mm) or 3/4" (19 mm)
Glass fabrication: Please contact CRL Technical Sales
certification: UL Classified
ULC/5132-93 PANIC PA100 PANIC PA110
ANSI/BHMA A156.3-2001 Grade 1 Latches at top only Latches at bottom only

Contact CRL Technical Sales at (800) 421-6144 in the U.S., (877) 421-6144 from Canada, or (323) 588-1281 International, and ask for Ext. 7700.
You can also send e-mail from the crlaurence.com home page. Click on Contact Us, and then click on Technical Sales for Commercial Products.
NOTE: All Access Control Handles on this page function as health and safety tools, and may only be purchased through CRL Authorized Glass Temperers and Door Manufacturers.

L115 A C.R. LAURENCE COMPANY crlaurence.com


CRL ACCESS CONTROL HANDLES
For Pricing on CRL Products, Call Toll Free
(800) 421-6144, or Visit crlaurence.com

CRL Top Latching Panic Handle Details

Keyed Access
Glass Mount Detail at Latch Rail Mount Detail at Latch (With Removable Core)

Glass Mount Detail at Latch With Header and PK Strike Rail Mount Detail at Latch with Header and ESK Strike Retainer Plate

CRL Bottom Latching Panic Handle Details

Keyed Access
Glass Mount Detail at Latch Rail Mount Detail at Latch (With Removable Core)

Glass Mount Detail at Latch With Floor Mount Ramp Strike Rail Mount Detail at Latch With Threshold Ramp Strike Retainer Plate

Contact CRL Technical Sales at (800) 421-6144 in the U.S., (877) 421-6144 from Canada, or (323) 588-1281 International, and ask for Ext. 7700.
You can also send e-mail from the crlaurence.com home page. Click on Contact Us, and then click on Technical Sales for Commercial Products.
NOTE: All Access Control Handles on this page function as health and safety tools, and may only be purchased through CRL Authorized Glass Temperers and Door Manufacturers.

e-mail: architectural@crlaurence.com I (800) 421-6144 ext. 7700 I Fax (800) 587-7501 L116
CRL ACCESS CONTROL HANDLES
For Pricing on CRL Products, Call Toll Free
(800) 421-6144, or Visit crlaurence.com

CRL Electronic Egress Control Handles


• Works With Electromagnetic Locks MANUFACTURED IN THE USA
BY C.R. LAURENCE
An ISO9001:2000 Certified Company

• UL and ULC Recognized Component


• For 1/2" or 3/4" (12 or 19 mm) Tempered Glass Doors
• Available in Polished and Brushed Stainless,
Satin and Polished Brass, and Oil Rubbed Bronze
• Custom Finishes Available By Special Order
• Wide Selection of Exterior Fixed Handles
• Custom Sizes Ship Within One to Two Weeks
• Models for Aluminum or Wood Doors Available
on Special Order
CRL EG100 Series Electronic Egress Control Handles are an economical method to control
access into, and safe exit from, areas that call for security and still maintain the beauty and view
of an 'all-glass' door. These elegant tubular devices give you maximum viewing area and a
contemporary look when used on 1/2" or 3/4" (12 or 19 mm) tempered glass doors. Like our
Panic and Deadbolt Handle Line, these Handles also meet the rigid requirements imposed by the
A.D.A. Codes on every manufacturer and installer of 'all-glass' doors. The interior portion of the
device is a slender 1-1/4" (32 mm) tube stretching across the door and then gently turning upwards
to the top of the door. This eliminates any interference in the lower half of the door, which must CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION
remain clear of obstructions to pass A.D.A. demands. OFFICE OF THE STATE FIRE MARSHALL
FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM
An Electronic Switch is completely concealed within the tube and releases a Magnetic Lock
Listing No. 3774-1603:100
at the top or bottom of the door when gently pushed. To complement the sleek interior look, we
offer a variety of exterior pull handles that can be as simple as a horizontal handle (Model EG100A)
to one that mirrors the interior device (Model EG100D). A Magnetic Lock must be ordered separately.
Please contact CRL Technical Sales. For your convenience, Custom Headers are available with all lock hardware installed.
If A.D.A. Codes are not a concern, we also have our EG110 Series Electronic Egress Control Handles. These Handles are of the same sleek design
and operation as the EG100 Series, except they stretch across the door and then bend downward to the bottom of the door. All of our EG100 and EG110
Electronic Egress Control Handles come equipped with surge suppression ZNR that is compatible with most Shear Locks. However, we suggest that the
lock manufacturer be contacted to ensure compatibility with this feature. All CRL Electronic Egress Control Handles go through rigorous testing before they
leave our manufacturing facility, ensuring that a high quality, dependable product is installed every time. Most importantly, they are all UL and ULC
Recognized Components, tested to NFPA Life and Safety Code Standards. For more information on Electronic Egress Control Handles, please visit our
web site at crlaurence.com.

MaXIMUM DOOR HEIGHTS:


Exterior - 96" (2.44 m) for 1/2" (12 mm) Glass Thickness
- 102" (2.59 m) for 3/4" (19 mm) Glass Thickness
Interior - 102" (2.59 m) for 1/2" (12 mm) Glass Thickness
- 108" (2.74 m) for 3/4" (19 mm) Glass Thickness
Exception - When using "F" Style Exterior Handle
- 108" (2.74 m) for either 1/2" or 3/4"
(12 or 19 mm) Glass Thickness

SpEcIfIcaTIONS:
Material: 1-1/4" (32 mm) Diameter Brass or Stainless
Steel Tubing (1.5 mm thick)
Glass Thicknesses: 1/2" (12 mm) or 3/4" (19 mm)
Glass fabrication: Please contact CRL Technical Sales
certification: UL294-2001 UL Recognized Component
ULC-S533-2002 ULC Recognized Component ELECTRONIC ELECTRONIC
NFPA 101-2002 Life and Safety Code EGRESS EG100 EGRESS EG110
Latches at top only Latches at bottom only

Contact CRL Technical Sales at (800) 421-6144 in the U.S., (877) 421-6144 from Canada, or (323) 588-1281 International, and ask for Ext. 7700.
You can also send e-mail from the crlaurence.com home page. Click on Contact Us, and then click on Technical Sales for Commercial Products.
NOTE: All Access Control Handles on this page function as health and safety tools, and may only be purchased through CRL Authorized Glass Temperers and Door Manufacturers.

L117 A C.R. LAURENCE COMPANY crlaurence.com


CRL ACCESS CONTROL HANDLES
For Pricing on CRL Products, Call Toll Free
(800) 421-6144, or Visit crlaurence.com

CRL Top Locking Electronic Egress Control Handle Details

Rail Mount Detail at Header and Wire Loop for EG100 Keyed Access (With Removable Core)

Rail Mount Detail at Top of EG100 With Header and SDC1562 Shear Lock Retainer Plate

CRL Bottom Locking Electronic Egress Control Handle Details

Rail Mount Detail at Sill/Jamb and Wire Loop for EG110 Keyed Access (With Removable Core)

Rail Mount Detail at Bottom of EG110 With Threshold and SDC1562 Shear Lock Retainer Plate

Contact CRL Technical Sales at (800) 421-6144 in the U.S., (877) 421-6144 from Canada, or (323) 588-1281 International, and ask for Ext. 7700.
You can also send e-mail from the crlaurence.com home page. Click on Contact Us, and then click on Technical Sales for Commercial Products.
NOTE: All Access Control Handles on this page function as health and safety tools, and may only be purchased through CRL Authorized Glass Temperers and Door Manufacturers.

e-mail: architectural@crlaurence.com I (800) 421-6144 ext. 7700 I Fax (800) 587-7501 L118
For Pricing on CRL Products, Call Toll Free
CRL CENTER LOCKS AND ACCESSORIES (800) 421-6144, or Visit crlaurence.com

CRL Center Locks


• Available in Two Sizes: 4" x 10" and 6" x 10" MANUFACTURED IN THE USA
BY C.R. LAURENCE
• Choose From Three Types: Deadlatch, An ISO9001:2000 Certified Company

Long Throw Deadlock, and Hook Throw Deadlock


• For Use With 1/2" (12 mm) Tempered Glass; Custom Sizes
for Other Glass Thicknesses Available on Special Order
• Installs Easily With Bolts; No Messy Silicone or
Cement Required
• Available in Five Stock Finishes Plus Custom Finishes
on Special Order

CRL Center Locks are available in three types: Deadlatch, Long Throw Deadlock,
and Hook Throw Deadlock. A variety of pull handles and latch-operating devices
(Thumbturns, Keyed Cylinders, Lever Handles, and Paddle Handles) are available to
accommodate different requirements.
We carry stock units for immediate shipment, and can fabricate custom units that
can be shipped within one week. Available in five stock finishes: Brushed Stainless,
Polished Stainless, Polished Brass, Black Bronze Anodized, and Satin Anodized,
with custom finishes available on special order. NOTE: A glass cut-out is required.
CRL Offers an easy-to-use ordering menu that takes you through all the required
information needed to produce your Center Lock. It can be faxed or e-mailed to you,
or accessed at crlaurence.com.

CRL 4" x 10" Center Locks and Glass Keepers


CRL Center Locks With Deadlatch CRL Center Lock Glass Keepers
• For Use With 1/2" (12 mm) • For Use With 1/2" (12 mm)
Tempered Glass Tempered Glass
• Installs Easily With Bolts; • Installs Easily With Bolts;
No Silicone or Cement Required No Silicone or Cement Required
• Available in Five Stock Finishes • Non-Handed Stock Models
• Custom Sizes for Other Glass Available in Five Standard
Thicknesses and Custom Finishes Finishes
RH/LHR Shown Non-Handed
Can Be Special Ordered • Custom Sizes for Other Glass
CRL 4" x 10" Center Locks With Deadlatch come with a Deadlatch that can Thicknesses and Custom Finishes
be dogged in the open position, an 8" (203 mm) Back-to-Back "D" Handle, Can Be Special Ordered
a Thumbturn on the inside, and a Keyed Cylinder on the outside. The dogging
feature is engaged by simply pushing both deadlatch bolts fully into the open CRL 4" x 10" Center Lock Glass Keepers have a Strike Plate with a
position, then engaging the dogging clips by turning either the Keyed Cylinder latch entry ramp on both sides, making them universal for all applications.
or Thumbturn until the clips snap in place. Available in five attractive finishes for 1/2" (12 mm) heavy glass doors.
Available in five attractive finishes for 1/2" (12 mm) heavy glass doors. Custom Glass Keepers With Deadlatch Electric Strikes are available on special
Locks with different accessories are available on special order (see page L123). order (see page L123).

LH/RHR* RH/LHR*
CAT. NO. CAT. NO. FINISH CAT. NO. HANDING FINISH
DL410LBS DL410RBS Brushed Stainless DLK410BS Non-Handed Brushed Stainless
DL410LPS DL410RPS Polished Stainless DLK410PS Non-Handed Polished Stainless
DL410LPB DL410RPB Polished Brass DLK410PB Non-Handed Polished Brass
DL410LSC DL410RSC Satin Anodized DLK410SC Non-Handed Satin Anodized
DL410LDU DL410RDU Black Bronze Anodized Glass Cut-Out DLK410DU Non-Handed Black Bronze Anodized Glass Cut-Out
Minimum order: 1 each. *See page L121 for handing chart. All Center Locks and Keepers Required Minimum order: 1 each. All Center Locks and Keepers can be combined for quantity pricing. Required
can be combined for quantity pricing.

L119 A C.R. LAURENCE COMPANY crlaurence.com


For Pricing on CRL Products, Call Toll Free
CRL CENTER LOCKS AND ACCESSORIES (800) 421-6144, or Visit crlaurence.com

CRL 4" x 10" Center Locks and Glass Keepers


CRL Center Locks With CRL Center Locks MANUFACTURED IN THE USA
BY C.R. LAURENCE
An ISO9001:2000 Certified Company

Long Throw Deadlock With Hook Throw Deadlock


• Non-Handed Stock Models • Non-Handed Stock Models
Available in Five Finishes Available in Five Finishes
• Installs Easily With Bolts; • Installs Easily With Bolts;
No Silicone or Cement Required No Silicone or Cement Required
• For Use With 1/2" (12 mm) • For Use With 1/2" (12 mm)
Tempered Glass Tempered Glass
• Custom Sizes for Other Glass • Custom Sizes for Other Glass
Thicknesses Are Available Thicknesses Are Available
on Special Order on Special Order
4" x 10" Center Locks With Long Throw 4" x 10" Center Locks With Hook Throw
Deadlock include a DL2110 Long Throw Deadlock include a DL2130 Hook Throw
Deadlock, an 8" (203 mm) back-to-back Non-Handed Deadlock, an 8" (203 mm) back-to-back Non-Handed
"D" Handle, a Thumbturn on the inside, "D" Handle, a Thumbturn on the inside,
and a Keyed Cylinder on the outside. and a Keyed Cylinder on the outside.
CAT. NO. FINISH CAT. NO. FINISH
DT410BS Brushed Stainless DH410BS Brushed Stainless
DT410PS Polished Stainless DH410PS Polished Stainless
DT410PB Polished Brass DH410PB Polished Brass
DT410SC Satin Anodized DH410SC Satin Anodized
DT410DU Black Bronze Anodized Glass Cut-Out DH410DU Black Bronze Anodized
Minimum order: 1 each. All Center Locks and Keepers can be combined for quantity pricing. Required Minimum order: 1 each. All Center Locks and Keepers can be combined for quantity pricing. Glass Cut-Out
Required

CRL Glass Keepers for Center Locks CRL Glass Keepers for
With Long Throw Deadlock DE4102 Series Center Locks
• Non-Handed Stock Models • Non-Handed Stock Models
Available in Five Finishes Available in Five Finishes for
• Installs Easily With Bolts; 1/2" (12 mm) Tempered Glass
No Silicone or Cement Required • Installs Easily With Bolts;
• For Use With 1/2" (12 mm) No Silicone or Cement Required
Tempered Glass • Custom Sizes Available
• Custom Sizes for Other Glass on Special Order for Other
Thicknesses Are Available Glass Thicknesses
on Special Order
These non-handed 4" x 10" Glass
Non-Handed 4" x 10" Glass Keepers for Keepers are for use on glass panels
the 4" x 10" Long Throw and Hook Throw adjacent to swinging doors using our
Deadlocks. Available in five finishes for Non-Handed DE4102 Series Two-Point Center Locks Non-Handed
1/2" (12 mm) heavy glass doors. (see page L112).

CAT. NO. FINISH CAT. NO. FINISH


DTK410BS Brushed Stainless DEK4102BS Brushed Stainless
DTK410PS Polished Stainless DEK4102PS Polished Stainless
DTK410PB Polished Brass DEK4102PB Polished Brass
DTK410SC Satin Anodized DEK4102SC Satin Anodized
DTK410DU Black Bronze Anodized Glass Cut-Out DEK4102DU Black Bronze Anodized Glass Cut-Out
Minimum order: 1 each. All Center Locks and Keepers can be combined for quantity pricing. Required Minimum order: 1 each. All Center Locks and Keepers can be combined for quantity pricing. Required

e-mail: architectural@crlaurence.com I (800) 421-6144 ext. 7700 I Fax (800) 587-7501 L120
CRL CENTER LOCKS AND ACCESSORIES
For Pricing on CRL Products, Call Toll Free
(800) 421-6144, or Visit crlaurence.com

CRL 6" x 10" Center Locks With Deadlatch


• Five Different Lock Functions Available; Office,
Entrance, Passage, Storeroom, and Classroom
• For 1/2" (12 mm) Tempered Glass; Custom Units
for Other Glass Thicknesses on Special Order
• Ships in Under a Week
• Available in Five Finishes
• Hassle Free Installation Without the Mess
of Cement or Silicone
• Jamb Mount Strike Plates on Special Order
6" x 10" Center Locks with Deadlatch offer the most diversity in
lock function and security. Available in five attractive finishes for
1/2" (12 mm) heavy glass doors. The operation of the lock varies
with the lock function. A simple cut-out in the glass is all that is
required. No messy cement or silicone required for installing.
Center Locks are available left and right handed (see reference
diagram below).

INSIDE

Left Hand Right Hand


(LH) (RH)

Left Hand Reverse Right Hand Reverse


(LHR) (RHR)

OUTSIDE MANUFACTURED IN THE USA Glass Cut-Out


BY C.R. LAURENCE Required
An ISO9001:2000 Certified Company

CRL 6" x 10" Center Office Lock


With an "Office Lock," the Latchbolt is OFFICE LOCK
operated by lever on either side (except LH RH LHR RHR
CAT. NO. CAT. NO. CAT. NO. CAT. NO. FINISH
when outside lever is locked by rocker in
faceplate) or by a key outside. Auxiliary DL610L0BS DL610R0BS DL611L0BS DL611R0BS Brushed Stainless
DL610L0PS DL610R0PS DL611L0PS DL611R0PS Polished Stainless
Latchbolt deadlocks the main Latchbolt
DL610L0PB DL610R0PB DL611L0PB DL611R0PB Polished Brass
to prevent jimmying of lock. Turning inside DL610L0SC DL610R0SC DL611L0SC DL611R0SC Satin Anodized
lever will always retract the locking LHR DL610L0DU DL610R0DU DL611L0DU DL611R0DU Black Bronze Anodized
mechanism and allow exiting. Shown Minimum order: 1 each. All Center Locks and Keepers can be combined for quantity pricing.

CRL 6" x 10" Center Entrance Lock


With an "Entrance Lock," the Latchbolt ENTRANCE LOCK (WILL NOT WORK WITH ELECTRIC STRIKE)
is operated by lever on either side (except LH RH LHR RHR
CAT. NO. CAT. NO. CAT. NO. CAT. NO. FINISH
when outside lever is locked by rocker
in faceplate). Deadbolt is operated by key DL610LEBS DL610REBS DL611LEBS DL611REBS Brushed Stainless
DL610LEPS DL610REPS DL611LEPS DL611REPS Polished Stainless
outside and thumbturn inside. Inside lever
DL610LEPB DL610REPB DL611LEPB DL611REPB Polished Brass
operates Latchbolt and Deadbolt DL610LESC DL610RESC DL611LESC DL611RESC Satin Anodized
LHR
simultaneously to allow exiting. Shown DL610LEDU DL610REDU DL611LEDU DL611REDU Black Bronze Anodized
NOTE: Will not work with Electric Strikes. Minimum order: 1 each. All Center Locks and Keepers can be combined for quantity pricing.

L121 A C.R. LAURENCE COMPANY crlaurence.com


CRL CENTER LOCKS AND ACCESSORIES
For Pricing on CRL Products, Call Toll Free
(800) 421-6144, or Visit crlaurence.com

CRL 6" x 10" Center Passage Lock


With a "Passage Lock," the levers are PASSAGE LOCK
always operable, allowing the Latchbolt to LH RH LHR RHR
CAT. NO. CAT. NO. CAT. NO. CAT. NO. FINISH
be retracted at all times.
DL610LPBS DL610RPBS DL611LPBS DL611RPBS Brushed Stainless
DL610LPPS DL610RPPS DL611LPPS DL611RPPS Polished Stainless
DL610LPPB DL610RPPB DL611LPPB DL611RPPB Polished Brass
DL610LPSC DL610RPSC DL611LPSC DL611RPSC Satin Anodized
LHR
Shown DL610LPDU DL610RPDU DL611LPDU DL611RPDU Black Bronze Anodized
Minimum order: 1 each. All Center Locks and Keepers can be combined for quantity pricing.

CRL 6" x 10" Center Storeroom Lock


With a "Storeroom Lock," the Latchbolt is STOREROOM LOCK
operated by lever inside, and by key LH RH LHR RHR
CAT. NO. CAT. NO. CAT. NO. CAT. NO. FINISH
outside. The outside lever is always fixed.
Auxiliary Latchbolt deadlocks the main DL610LSBS DL610RSBS DL611LSBS DL611RSBS Brushed Stainless
DL610LSPS DL610RSPS DL611LSPS DL611RSPS Polished Stainless
Latchbolt to prevent jimmying of lock.
DL610LSPB DL610RSPB DL611LSPB DL611RSPB Polished Brass
Turning inside lever will always retract the DL610LSSC DL610RSSC DL611LSSC DL611RSSC Satin Anodized
locking mechanism to allow exiting. This LHR
Shown DL610LSDU DL610RSDU DL611LSDU DL611RSDU Black Bronze Anodized
lock is used primarily with Electric Strikes. Minimum order: 1 each. All Center Locks and Keepers can be combined for quantity pricing.

CRL 6" x 10" Center Classroom Lock


With a "Classroom Lock," the Latchbolt is CLASSROOM LOCK
operated by lever either side except when LH RH LHR RHR
CAT. NO. CAT. NO. CAT. NO. CAT. NO. FINISH
outside lever is locked by Key outside. Key
operates latch or unlocks outside lever. DL610LMBS DL610RMBS DL611LMBS DL611RMBS Brushed Stainless
DL610LMPS DL610RMPS DL611LMPS DL611RMPS Polished Stainless
Inside lever is always operable.
DL610LMPB DL610RMPB DL611LMPB DL611RMPB Polished Brass
DL610LMSC DL610RMSC DL611LMSC DL611RMSC Satin Anodized
LHR
Shown DL610LMDU DL610RMDU DL611LMDU DL611RMDU Black Bronze Anodized
Minimum order: 1 each. All Center Locks and Keepers can be combined for quantity pricing.

CRL 6" x 10" Center Push Button Locks and Glass Keepers
• Requires No Electrical Connections
• Complies With A.D.A. Standards
new MANUFACTURED IN THE USA
BY C.R. LAURENCE
An ISO9001:2000 Certified Company

• Five Finishes Available


CRL Push Button Lock and Glass Keeper assemblies require no electrical connections so the mounting
is exactly the same as our other 6" x 10" Center Locks. On the exterior side of the door is a Keypad with
five vertical push buttons, numbered in sequential order from top to bottom. On the interior side there is a
lever, which operates the Latchbolt at all times.
The lock complies with A.D.A. standards and is ideal for high frequency use in hospitals, entrances
to commercial and industrial buildings, apartments, condominiums, schools, etc.
The Center Lock Glass Keeper (sold separately), is specially machined to accept the strike from the
Push Button Lock. If a Center Lock Glass Keeper is not required, a Strike Plate for the jamb is supplied
with the Push Button Lock assembly.

PUSH BUTTON LOCKS* CENTER LOCK GLASS KEEPERS*


LH RH LHR RHR LH RH
CAT. NO. CAT. NO. CAT. NO. CAT. NO. FINISH CAT. NO. CAT. NO. FINISH
DL610LCBS DL610RCBS DL611LCBS DL611RCBS Brushed Stainless DLK610LCBS DLK610RCBS Brushed Stainless
DL610LCPS DL610RCPS DL611LCPS DL611RCPS Polished Stainless DLK610LCPS DLK610RCPS Polished Stainless
DL610LCPB DL610RCPB DL611LCPB DL611RCPB Polished Brass DLK610LCPB DLK610RCPB Polished Brass
DL610LCSC DL610RCSC DL611LCSC DL611RCSC Satin Anodized DLK610LCSC DLK610RCSC Satin Anodized
DL610LCDU DL610RCDU DL611LCDU DL611RCDU ▼ Black Bronze Anodized DLK610LCDU DLK610RCDU Black Bronze Anodized
Minimum order: 1 each. All Center Locks and Keepers can be combined for quantity pricing. Minimum order: 1 each. All Center Locks and Keepers can be combined for quantity pricing.
▼ Black Bronze Cover Plate with Satin Anodized Lock and Lever. * Push Button Lock and Glass Keeper are sold separately.
* Push Button Lock and Glass Keeper are sold separately.

e-mail: architectural@crlaurence.com I (800) 421-6144 ext. 7700 I Fax (800) 587-7501 L122
CRL CENTER LOCKS AND ACCESSORIES
For Pricing on CRL Products, Call Toll Free
(800) 421-6144, or Visit crlaurence.com

CRL 4" x 10" Center Lock Glass Keepers CRL 6" x 10" Center Lock Glass Keepers
With Deadlatch Electric Strike With Deadlatch Electric Strike
• Accepts 1/2" (12 mm) Tempered Glass
• Accepts 1/2" (12 mm) Tempered Glass
• Available in Five Finishes • Ships In Under a Week
• Available in Five Finishes
4" x 10" Center Lock Glass Keepers with Deadlatch
Electric Strike are handed to match the appropriate
6" x 10" Center Lock Glass Keepers with Deadlatch
Center Lock. To simplify ordering use the same
Electric Strike are handed to match the appropriate
handing as the lock. That way you match the Glass
Center Lock. To simplify ordering use the same handing
Keeper with Deadlatch Electric Strike to Center Lock
as the lock. That way you match the Glass Keeper with
handing, which eliminates confusion. These units are
Deadlatch Electric Strike to Center Lock handing, which
special order and can be shipped within one week.
eliminates confusion. NOTE: Will not work with Entrance
For more information, contact CRL Technical Sales at
RH/LHR Shown Lock configuration. These units are special order and RH/LHR Shown
(800) 421-6144 in the U.S., (877) 421-6144 from
can be shipped within one week. Please contact
Canada, or (323) 588-1281 International, and ask for
Technical Sales at (800) 421-6144 in the U.S., (877)
Ext. 7700. You can also e-mail us through our web
421-6144 from Canada, or (323) 588-1281 International,
site at crlaurence.com. From the home page click on
and ask for Ext. 7700.
Contact Us, and then click on Technical Sales for
Commercial Products.
LH/RHR* RH/LHR* LH/RHR* RH/LHR*
CAT. NO. CAT. NO. FINISH CAT. NO. CAT. NO. FINISH
DLEL410BS DLER410BS Brushed Stainless DLEL610BS DLER610BS Brushed Stainless
DLEL410PS DLER410PS Polished Stainless DLEL610PS DLER610PS Polished Stainless
DLEL410PB DLER410PB Polished Brass DLEL610PB DLER610PB Polished Brass
DLEL410SC DLER410SC Satin Anodized DLEL610SC DLER610SC Satin Anodized
DLEL410DU DLER410DU Black Bronze Anodized DLEL610DU DLER610DU Black Bronze Anodized
Minimum order: 1 each. *See page L121 for handing chart. All Center Locks and Keepers can be Glass Cut-Out Minimum order: 1 each. *See page L121 for handing chart. All Center Locks and Keepers can be Glass Cut-Out
combined for quantity pricing. Extra gaskets available on special order for use with 3/8" (10 mm) glass. combined for quantity pricing. Extra gaskets available on special order for use with 3/8" (10 mm) glass.
Required Required

CRL 6" x 10" Center Lock Glass Keepers CRL Custom Center Locks
• Installs Easily With Bolts; No and Glass Keepers
Silicone or Cement Required • Custom Units for 3/8"
• Available in Five Popular Finishes to 3/4" (10 to 19 mm)
• For 1/2" (12 mm) Tempered Glass Glass Thicknesses
6" x 10" Center Lock Glass Keepers have a strike • Ready to Ship Within
plate with a latch entry ramp on both sides, making
them universal for all applications. Available in five
One Week
attractive finishes for 1/2" (12 mm) tempered glass • Installs Easily With
doors. For more information, contact CRL Technical
Sales at (800) 421-6144 in the U.S., (877) 421-6144 Bolts; No Silicone or
from Canada, or (323) 588-1281 International, Cement Required
and ask for Ext. 7700. You can also e-mail us Non-Handed
through our web site at crlaurence.com. From
the home page click on Contact Us, and then click
on Technical Sales for Commercial Products. CRL Custom Center Locks with Deadlatch are available in both
4" x 10" and 6" x 10" sizes with many options. You have a choice of
Actuating Mechanisms, Keyed Cylinder or Thumbturn, Handle and
ENTRANCE FOR OTHER Crossbar, or even Combination Locks.
LOCK* LOCKS Strike Plates or Glass Keepers must be ordered separately. Glass
CAT. NO. CAT. NO. FINISH Keepers with Electric Strikes are shown above. To simplify quoting and
DLK610EBS DLK610BS Brushed Stainless ordering we have an Easy-to-Use Ordering Menu available upon request.
DLK610EPS DLK610PS Polished Stainless
We will fax it to you, or you can get it from crlaurence.com. Please
DLK610EPB DLK610PB Polished Brass
DLK610ESC DLK610SC Satin Anodized
contact Technical Sales at (800) 421-6144 in the U.S., (877) 421-6144
DLK610EDU DLK610DU Black Bronze Anodized from Canada, or (323) 588-1281 International. Ask for Ext. 7700.
Minimum order 1 each. All Center Locks and Keepers can be combined for quantity pricing. *Used only
Glass Cut-Out
with Entrance Locks. Required

L123 A C.R. LAURENCE COMPANY crlaurence.com


CRL GLASS MOUNTED DOOR HANDLES
For Pricing on CRL Products, Call Toll Free
(800) 421-6144, or Visit crlaurence.com

CRL Glass Mounted Ladder CRL Glass Mounted Ladder


Style Pull Handle With Style Pull Handle With
Acrylic Semi-Inserts Acrylic Full Inserts
INcLUDES: INcLUDES:
1 Set: CA18X18 Pull Handles 1 Set: CB18X18 Pull Handles
(Back-to-Back Mounting) (Back-to-Back Mounting)
2 Each: Through-Bolts for Glass Mounting 2 Each: Through-Bolts for Glass Mounting
4 Each: 1-1/4" (32 mm) Diameter 4 Each: 1-1/4" (32 mm) Diameter
Matching Finish Metal Washers Matching Metal Finish Washers
and Rubber Gaskets and Rubber Gaskets

SpEcIfIcaTIONS: SpEcIfIcaTIONS:
for Use With: for Use With:
3/8" to 3/4" (10 to 19 mm) Glass 3/8" to 3/4" (10 to 19 mm) Glass
construction: construction:
1" (25 mm) Diameter Stainless Steel 1" (25 mm) Diameter Stainless Steel
or Brass Tubing with Acrylic Semi-Insert or Brass Tubing with Acrylic Full Insert
(White Accent Lines in Acrylic) (Accent Lines in Acrylic)
Glass fabrication Required: Glass fabrication Required:
Two 5/8" (16 mm) Diameter Holes, Two 5/8" (16 mm) Diameter Holes,
18" (457 mm) Center-to-Center 18" (457 mm) Center-to-Center
Overall Length: Overall Length:
24-1/2" (622 mm)
27" (685 mm)

CAT. NO. FINISH CAT. NO. FINISH


CA18X18BR Polished Brass CB18X18BR Polished Brass
CA18X18PS Polished Stainless CB18X18PS Polished Stainless
Minimum order: 1 each. All Pull Handles can be Minimum order: 1 each. All Pull Handles can be
combined for quantity pricing. combined for quantity pricing.

CRL Glass Mounted Ring CRL Glass Mounted Ladder


Style Pull Handle Style Pull Handle With
Undercut Accent Rings
INcLUDES: INcLUDES:
1 Set: CR18X18 Pull Handles 1 Set: CT18X18 Pull Handles
(Back-to-Back Mounting) (Back-to-Back Mounting)
2 Each: Through-Bolts for Glass Mounting 2 Each: Through-Bolts for Glass Mounting
4 Each: 1-1/4" (32 mm) Diameter 4 Each: 1-1/4" (32 mm) Diameter
Matching Finish Metal Washers Matching Finish Metal Washers
and Rubber Gaskets and Rubber Gaskets

SpEcIfIcaTIONS: SpEcIfIcaTIONS:
for Use With: for Use With:
3/8" to 3/4" (10 to 19 mm) Glass 3/8" to 3/4" (10 to 19 mm) Glass
construction: construction:
1" (25 mm) Diameter Stainless 1" (25 mm) Diameter Stainless
Steel or Brass Tubing Steel or Brass Tubing
Glass fabrication Required: Glass fabrication Required:
Two 5/8" (16 mm) Diameter Holes, Two 5/8" (16 mm) Diameter Holes,
18" (457 mm) Center-to-Center 18" (457 mm) Center-to-Center
Overall Length: Overall Length:
19" (483 mm) 25" (635 mm)

CAT. NO. FINISH CAT. NO. FINISH


CR18X18BR Polished Brass CT18X18BR Polished Brass
CR18X18PS Polished Stainless CT18X18PS Polished Stainless
Minimum order: 1 each. All Pull Handles can be CT18X18BS Brushed Stainless
combined for quantity pricing.
Minimum order: 1 each. All Pull Handles can be
combined for quantity pricing.

e-mail: architectural@crlaurence.com I (800) 421-6144 ext. 7700 I Fax (800) 587-7501 L124
CRL GLASS MOUNTED DOOR HANDLES
For Pricing on CRL Products, Call Toll Free
(800) 421-6144, or Visit crlaurence.com

CRL Straight and Offset STRAIGHT BACK-TO-BACK PULL HANDLES


CAT. NO. SIZE FINISH
Back-to-Back Pull Handles CM10X10BS 10" (254 mm) Brushed Stainless
CM10X10PS 10" (254 mm) Polished Stainless
• Stocked in Up to Five Architectural Finishes CM10X10BR 10" (254 mm) Polished Brass
• For Use With 3/8" to 3/4" (10 to 19 mm) Glass CM10X10SA 10" (254 mm) Satin Anodized
CM10X10DU 10" (254 mm) Dark Bronze Anodized
• Complete With Matching Finish Metal Washers CM12X12BS 12" (305 mm) Brushed Stainless
and Through-Bolts for Mounting CM12X12PS 12" (305 mm) Polished Stainless
CM12X12BR 12" (305 mm) Polished Brass
SpEcIfIcaTIONS: CM12X12SA 12" (305 mm) Satin Anodized
for Use With: CM12X12DU 12" (305 mm) Dark Bronze Anodized
3/8" to 3/4" CM18X18BS 18" (457 mm) Brushed Stainless
(10 to 19 mm) Glass CM18X18PS 18" (457 mm) Polished Stainless
construction: CM18X18BR 18" (457 mm) Polished Brass
1" (25 mm) Diameter CM24X24BS 24" (610 mm) Brushed Stainless
Stainless Steel or Brass Tubing CM24X24PS 24" (610 mm) Polished Stainless
Glass fabrication Required: CM24X24BR 24" (610 mm) Polished Brass
Two 5/8" (16 mm) Diameter Holes, Minimum order: 1 each. All Pull Handles can be combined for quantity pricing.
10x10: 10" (254 mm) Center-to-Center
OFFSET BACK-TO-BACK PULL HANDLES
12x12: 12" (305 mm) Center-to-Center
18x18: 18" (457 mm) Center-to-Center CAT. NO. SIZE FINISH
24x24: 24" (610 mm) Center-to-Center CD10X10BS 10" (254 mm) Brushed Stainless
Optional 1-1/4" (32 mm) Diameter Offset CD10X10PS 10" (254 mm) Polished Stainless
available on Special Order CD10X10BR 10" (254 mm) Polished Brass
Straight
CD10X10SA 10" (254 mm) Satin Anodized
Extra bolts available, sold separately: CD10X10DU 10" (254 mm) Dark Bronze Anodized
CD12X12BS 12" (305 mm) Brushed Stainless
INcLUDES: caT. NO. DEScRIpTION
CD12X12PS 12" (305 mm) Polished Stainless
1 Set: CM10X10, CM12X12, CM18X18, TB2cH Through-Bolts for 3/8" to 3/4" 12" (305 mm)
CM24X24, CD10X10, CD12X12 CD12X12BR Polished Brass
(10 to 19 mm) Glass
CD12X12SA 12" (305 mm) Satin Anodized
or CD18X18 Pull Handles TB4cH Through-Bolts for 1-3/4"
(Back-to-Back Mounting) CD12X12DU 12" (305 mm) Dark Bronze Anodized
(45 mm) Wood or Metal
CD18X18BS 18" (457 mm) Brushed Stainless
2 Each: Through-Bolts for Glass Mounting Door Frames
f40WK Matching Washer Set and CD18X18PS 18" (457 mm) Polished Stainless
4 Each: 1-1/4" (32 mm) Diameter
Through-Bolt for 3/8" to 3/4" CD18X18BR 18" (457 mm) Polished Brass
Matching Finish Metal Washers
and Rubber Gaskets (10 to 19 mm) Glass Minimum order: 1 each. All Pull Handles can be combined for quantity pricing.

CRL Glass Mounted Solid CRL Glass Mounted Mitered


Pull Handle new Corner Style Pull Handle new
SpEcIfIcaTIONS: SpEcIfIcaTIONS:
for Use With: 3/8" to 3/4" (10 to 19 mm) Glass for Use With: 3/8" to 3/4" (10 to 19 mm) Glass
construction: 1" (25 mm) Solid Stainless Steel or Brass construction: 1" (25 mm) Round Stainless Steel Tubing
Glass fabrication Required: Glass fabrication Required:
Two 5/8" (16 mm) Diameter Holes, 10x10: 10" (254 mm) Two 5/8" (16 mm) Diameter Holes,
Center-to-Center; 12x12: 12" (305 mm) Center-to-Center 10x10: 10" (254 mm) Center-to-Center
INcLUDES: 12x12: 12" (305 mm) Center-to-Center
1 Set: CS10X10 or CS12X12 Pull Handles 18x18: 18" (457 mm) Center-to-Center
(Back-to-Back Mounting) 24x24: 24" (610 mm) Center-to-Center
2 Each: Through-Bolts for Glass Mounting
4 Each: 1-1/4" (32 mm) Diameter Matching Finish Metal INcLUDES:
Washers and Rubber Gaskets 1 Set: MH10X10, MH12X12, MH18X18 or MH24X24
Pull Handles (Back-to-Back Mounting)
Extra bolts available, sold separately: 2 Each: Through-Bolts for Glass Mounting
caT. NO. DEScRIpTION Extra bolts available, sold separately:
TB2cH Through-Bolts for 3/8" to 3/4" (10 to 19 mm) Glass
CAT. NO. SIZE FINISH caT. NO. DEScRIpTION
TB4cH Through-Bolts for 1-3/4" (45 mm) Wood or Metal Door Frames
f40WK Matching Washer Set and Through-Bolt for 3/8" to 3/4" (10 to 19 mm) Glass TB2cH Through-Bolts for 3/8"
MH10X10BS 10" (254 mm) Brushed Stainless to 3/4" (10 to 19 mm)
CAT. NO. SIZE FINISH MH10X10PS 10" (254 mm) Polished Stainless Glass
MH12X12BS 12" (305 mm) Brushed Stainless TB4cH Through-Bolts for
CS10X10BS 10" (254 mm) Brushed Stainless MH12X12PS 12" (305 mm) Polished Stainless 1-3/4" (45 mm)
CS10X10PS 10" (254 mm) Polished Stainless MH18X18BS 18" (457 mm) Brushed Stainless Wood or Metal
CS10X10BR 10" (254 mm) Polished Brass MH18X18PS 18" (457 mm) Polished Stainless Door Frames
CS12X12BS 12" (305 mm) Brushed Stainless MH24X24BS 24" (610 mm) Brushed Stainless f40WK Matching Washer
CS12X12PS 12" (305 mm) Polished Stainless MH24X24PS 24" (610 mm) Polished Stainless Set and Through-Bolt
CS12X12BR 12" (305 mm) Polished Brass for 3/8" to 3/4"
Minimum order: 1 each. All Pull Handles can be combined for quantity pricing.
Minimum order: 1 each. All Pull Handles can be combined for quantity pricing. Optional 1-1/4" (32 mm) diameter available on special order. (10 to 19 mm) Glass

L125 A C.R. LAURENCE COMPANY crlaurence.com


CRL GLASS MOUNTED DOOR HANDLES
For Pricing on CRL Products, Call Toll Free
(800) 421-6144, or Visit crlaurence.com

CRL Glass Mounted Square Tube CRL Glass Mounted Rounded Corner
Style Pull Handle new Square Tube Style Pull Handle new
SpEcIfIcaTIONS: SpEcIfIcaTIONS:
for Use With: 3/8" to 3/4" (10 to 19 mm) Glass for Use With: 3/8" to 3/4" (10 to 19 mm) Glass
construction: 1" (25 mm) Square Stainless Steel Tubing construction: 1" (25 mm) Square Stainless Steel Tubing
Glass fabrication Required: Glass fabrication Required:
Two 5/8" (16 mm) Diameter Holes, Two 5/8" (16 mm) Diameter Holes,
10x10: 10" (254 mm) Center-to-Center 10x10: 10" (254 mm) Center-to-Center
12x12: 12" (305 mm) Center-to-Center 12x12: 12" (305 mm) Center-to-Center
18x18: 18" (457 mm) Center-to-Center 18x18: 18" (457 mm) Center-to-Center
24x24: 24" (610 mm) Center-to-Center 24x24: 24" (610 mm) Center-to-Center
INcLUDES:
INcLUDES:
1 Set: RST10X10, RST12X12, RST18X18 or RST24X24
1 Set: SQ10X10, SQ12X12, SQ18X18 or SQ24X24 Pull Handles (Back-to-Back Mounting)
Pull Handles (Back-to-Back Mounting)
2 Each: Through-Bolts for Glass Mounting
2 Each: Through-Bolts for Glass Mounting

Extra bolts available, sold separately: Extra bolts available, sold separately:
CAT. NO. SIZE FINISH CAT. NO. SIZE FINISH
caT. NO. DEScRIpTION caT. NO. DEScRIpTION
SQ10X10BS 10" (254 mm) Brushed Stainless RST10X10BS 10" (254 mm) Brushed Stainless
TB2cH Through-Bolts for 3/8" TB2cH Through-Bolts for 3/8"
SQ10X10PS 10" (254 mm) Polished Stainless RST10X10PS 10" (254 mm) Polished Stainless
to 3/4" (10 to 19 mm) to 3/4" (10 to 19 mm)
SQ12X12BS 12" (305 mm) Brushed Stainless Glass RST12X12BS 12" (305 mm) Brushed Stainless Glass
SQ12X12PS 12" (305 mm) Polished Stainless TB4cH Through-Bolts for RST12X12PS 12" (305 mm) Polished Stainless TB4cH Through-Bolts for
SQ18X18BS 18" (457 mm) Brushed Stainless 1-3/4" (45 mm) RST18X18BS 18" (457 mm) Brushed Stainless 1-3/4" (45 mm)
SQ18X18PS 18" (457 mm) Polished Stainless Wood or Metal RST18X18PS 18" (457 mm) Polished Stainless Wood or Metal
SQ24X24BS 24" (610 mm) Brushed Stainless Door Frames RST24X24BS 24" (610 mm) Brushed Stainless Door Frames
SQ24X24PS 24" (610 mm) Polished Stainless RST24X24PS 24" (610 mm) Polished Stainless
Minimum order: 1 each. All Pull Handles can be combined for quantity pricing. Minimum order: 1 each. All Pull Handles can be
combined for quantity pricing.

STRAIGHT COMBINATION PUSH AND PULL HANDLES


CRL Glass Mounted Straight and Offset CAT. NO. SIZE FINISH
Combination Push and Pull Handles CM10X28BS
CM10X28PS
10" X 28"
10" X 28"
Brushed Stainless
Polished Stainless
• Five Beautiful Architectural Finishes CM10X28BR 10" X 28" Polished Brass
• For Use With 3/8" to 3/4" (10 to 19 mm) Glass CM10X28SA 10" X 28" Satin Anodized
CM10X28DU 10" X 28" Dark Bronze Anodized
CM12X28BS 12" X 28" Brushed Stainless
CM12X28PS 12" X 28" Polished Stainless
CM12X28BR 12" X 28" Polished Brass
CM12X28SA 12" X 28" Satin Anodized
CM12X28DU 12" X 28" Dark Bronze Anodized
SpEcIfIcaTIONS: Minimum order: 1 each. All Pull Handles can be combined for quantity pricing.
for Use With:
3/8" to 3/4" (10 to 19 mm) Glass
construction:
Straight
1" (25 mm) Diameter
OFFSET COMBINATION PUSH AND PULL HANDLES
Stainless Steel or Brass Tubing
CAT. NO. SIZE FINISH
Glass fabrication Required:
CD10X28BS 10" X 28" Brushed Stainless
Three 5/8" (16 mm) Diameter Holes,
CD10X28PS 10" X 28" Polished Stainless
10" (254 mm) Center-to-Center
CD10X28BR 10" X 28" Polished Brass
12" (305 mm) Center-to-Center Offset CD10X28SA 10" X 28" Satin Anodized
28" (711 mm) Center-to-Center CD10X28DU 10" X 28" Dark Bronze Anodized
33" (838 mm) Center-to-Center CD10X33BS 10" X 33" Brushed Stainless
Optional 1-1/4" (32 mm) Diameter CD10X33PS 10" X 33" Polished Stainless
available on Special Order Extra bolts available, sold separately: CD10X33BR 10" X 33" Polished Brass
caT. NO. DEScRIpTION CD10X33SA 10" X 33" Satin Anodized
INcLUDES: TB2cH Through-Bolts for 3/8" to 3/4" (10 to 19 mm) Glass CD10X33DU 10" X 33" Dark Bronze Anodized
1 Set: CM10X28, CM12X28, CD10X28, CD10X33 TB4cH Through-Bolts for 1-3/4" (45 mm) Wood or Metal CD12X28BS 12" X 28" Brushed Stainless
or CD12X28 Combination Push-Pull Door Frames CD12X28PS 12" X 28" Polished Stainless
Handles (Back-to-Back Mounting) f40WK Matching Washer Set and Through-Bolt for 3/8" CD12X28BR 12" X 28" Polished Brass
2 Each: Through-Bolts for Glass Mounting to 3/4" (10 to 19 mm) Glass CD12X28SA 12" X 28" Satin Anodized
4 Each: 1-1/4" (32 mm) Diameter Matching Finish f40SK Matching Washer and Stud Kit for Single-Sided CD12X28DU 12" X 28" Dark Bronze Anodized
Metal Washers and Rubber Gaskets Attachment for 3/8" to 3/4" (10 to 19 mm) Glass Minimum order: 1 each. All Pull Handles can be combined for quantity pricing.

e-mail: architectural@crlaurence.com I (800) 421-6144 ext. 7700 I Fax (800) 587-7501 L126
CRL GLASS MOUNTED DOOR HANDLES
For Pricing on CRL Products, Call Toll Free
(800) 421-6144, or Visit crlaurence.com

CRL Glass Mounted Curved CRL Glass Mounted Elbow


Style Pull Handle Style Pull Handle
INcLUDES: INcLUDES:
1 Set: CC12X12 Pull Handles 1 Set: CV12X12 Pull Handles
(Back-to-Back Mounting) (Back-to-Back Mounting)
2 Each: Through-Bolts for 2 Each: Through-Bolts for
Glass Mounting Glass Mounting
4 Each: 1-1/4" (32 mm) Diameter 4 Each: 1-1/4" (32 mm) Diameter
Matching Finish Metal Washers Matching Finish Metal Washers
and Rubber Gaskets and Rubber Gaskets

SpEcIfIcaTIONS: SpEcIfIcaTIONS:
for Use With: for Use With:
3/8" to 3/4" (10 to 19 mm) Glass 3/8" to 3/4" (10 to 19 mm) Glass
construction: construction:
1" (25 mm) Diameter Stainless 1" (25 mm) Diameter Stainless
Steel or Brass Tubing Steel or Brass Tubing
Glass fabrication Required: Glass fabrication Required:
Two 5/8" (16 mm) Diameter Holes, Two 5/8" (16 mm) Diameter Holes,
12" (305 mm) Center-to-Center 12" (305 mm) Center-to-Center
Extra bolts available, sold separately: Extra bolts available, sold separately:
caT. NO. DEScRIpTION caT. NO. DEScRIpTION
TB2cH Through-Bolts for 3/8" to 3/4" TB2cH Through-Bolts for 3/8" to 3/4"
CAT. NO. FINISH (10 to 19 mm) Glass CAT. NO. FINISH (10 to 19 mm) Glass
CC12X12BS Brushed Stainless TB4cH Through-Bolts for 1-3/4" CV12X12BS Brushed Stainless TB4cH Through-Bolts for 1-3/4"
CC12X12PS Polished Stainless (45 mm) Wood or Metal CV12X12PS Polished Stainless (45 mm) Wood or Metal
CC12X12BR Polished Brass Door Frames CV12X12BR Polished Brass Door Frames
CC12X12DU Dark Bronze Anodized f40WK Matching Washer Set and Minimum order: 1 each. All Pull Handles can be f40WK Matching Washer Set and
combined for quantity pricing.
Minimum order: 1 each. All Pull Handles can be Through-Bolt for 3/8" to 3/4" Through-Bolt for 3/8" to 3/4"
combined for quantity pricing.
(10 to 19 mm) Glass (10 to 19 mm) Glass

CRL Glass Mounted Bracket CRL Glass Mounted Sculptured


Style Pull Handle Style Pull Handle
INcLUDES: INcLUDES:
1 Set: CX17X17 Pull Handles 1 Set: CQ10X10 Pull Handles
(Back-to-Back Mounting) (Back-to-Back Mounting)
2 Each: Through-Bolts for 2 Each: Through-Bolts for Glass Mounting
Glass Mounting 4 Each: 1-1/16" (27 mm) Diameter
4 Each: 1-1/4" (32 mm) Diameter Matching Finish Metal
Matching Finish Metal Washers and Rubber Gaskets
Washers and Rubber Gaskets

SpEcIfIcaTIONS: SpEcIfIcaTIONS:
for Use With: for Use With:
3/8" to 3/4" (10 to 19 mm) Glass 3/8" and 1/2" (10 and 12 mm) Glass
construction: construction: Cast Solid Brass
1" (25 mm) Diameter
Glass fabrication Required:
Stainless Steel Tubing
Two 5/8" (16 mm) Diameter Holes,
Glass fabrication Required:
10" (254 mm) Center-to-Center
Two 5/8" (16 mm) Diameter Holes,
16-3/4" (425 mm) Center-to-Center
CAT. NO. FINISH
CQ10X10CH Chrome Plated
CQ10X10BR Polished Brass
CQ10X10BSC Brushed Satin Chrome
CQ10X10BN Brushed Nickel
CQ10X10PN Polished Nickel
CAT. NO. FINISH CQ10X10ABR Antique Brass
CX17X17BS Brushed Stainless CQ10X10GP Gold Plated
CX17X17PS Polished Stainless CQ10X100RB Oil Rubbed Bronze
Minimum order: 1 each. All Pull Handles can be Minimum order: 1 each. All Pull Handles can be
combined for quantity pricing. combined for quantity pricing.

L127 A C.R. LAURENCE COMPANY crlaurence.com


CRL GLASS MOUNTED DOOR HANDLES
For Pricing on CRL Products, Call Toll Free
(800) 421-6144, or Visit crlaurence.com

CRL Variant Series Adjustable


Mounting Post Style Pull Handles
• Adjustable Mounting Posts Can Mount on 6" to 26-3/4"
(152 to 679 mm) Centers
CRL Variant Series Adjustable Mounting Post Style Pulls are designed to fit
on standard hole patterns of 12", 18", and 24" (305, 457, and 610 mm) centers,
but with its adjustable mounting posts will fit almost any hole pattern from 6" to 26-3/4"
(152 to 679 mm) centers. Mounting Posts can also be purchased separately.

SpEcIfIcaTIONS:
for Use With:
3/8" to 3/4" (10 to 19 mm) Glass MANUFACTURED IN THE USA
BY C.R. LAURENCE
construction:
An ISO9001:2000 Certified Company

1" (25 mm) Diameter Stainless Steel Tubing


Glass fabrication Required:
Two 5/8" (16 mm) Diameter Holes,
VPS x 16: 12" (305 mm) Center-to-Center
VPS x 22: 18" (457 mm) Center-to-Center
VPS x 28: 24" (610 mm) Center-to-Center
NOTE: Hole centers shown are for standard
mounting locations. You may vary actual hole centers.
INcLUDES:
1 Set: 1" (25 mm) Diameter VPS16, VPS22, or VPS28
Pull Handles (Back-to-Back Mounting)
2 Each: Through-Bolts for Glass Mounting Pull Set With VP1 Pull Set With VP2
Mounting Posts Mounting Posts
4 Each: Adjustable Mounting Posts
(VP1 or VP2 Depending on Handle Style)

VARIANT PULL SET WITH VP1 MOUNTING POSTS VARIANT PULL SET WITH VP2 MOUNTING POSTS ADDITIONAL MOUNTING POSTS
CAT. NO. ROD LENGTH FINISH CAT. NO. ROD LENGTH FINISH CAT. NO. TYPE FINISH
VPS116BS 16" (406 mm) Brushed Stainless VPS216BS 16" (406 mm) Brushed Stainless VP1BS VP1 Brushed Stainless
VPS116PS 16" (406 mm) Polished Stainless VPS216PS 16" (406 mm) Polished Stainless VP1PS VP1 Polished Stainless
VPS122BS 22" (559 mm) Brushed Stainless VPS222BS 22" (559 mm) Brushed Stainless VP2BS VP2 Brushed Stainless
VPS122PS 22" (559 mm) Polished Stainless VPS222PS 22" (559 mm) Polished Stainless VP2PS VP2 Polished Stainless
VPS128BS 28" (711 mm) Brushed Stainless VPS228BS 28" (711 mm) Brushed Stainless Minimum order: 1 set. Each set includes: 2 each Through-Bolts for Glass
VPS128PS 28" (711 mm) Polished Stainless VPS228PS 28" (711 mm) Polished Stainless Mounting; 4 each Adjustable Mounting Posts

Minimum order: 1 each. All Pull Handles can be combined for quantity pricing. Minimum order: 1 each. All Pull Handles can be combined for quantity pricing.

CRL Frameless Sliding Door Handle


MANUFACTURED IN THE USA
BY C.R. LAURENCE
• Four Architectural Finishes Available An ISO9001:2000 Certified Company

for 1/2" (12 mm) Glass


• Low Projection Will Not Interfere With Sliding Door Action
CRL Frameless Sliding Door Handles feature a low profile projection that will not
interfere with the sliding action of the door passing another panel or even a pocket type
installation into the wall. These Handles are available in four stock architectural finishes
to complement our Frameless Sliding Door Systems. Custom finishes and custom
sizes are also available upon request.

Glass fabrication Required: CAT. NO. FINISH


Glass Cut-Out With Polished Edges; SGH8CH Chrome
Two 1/2" (13 mm) Diameter Holes SGH8BR Lacquered Brass
SGH8BN Brushed Nickel
SGH8SC Satin Chrome
Minimum order: 1 each. Finishes can be combined
for quantity pricing.

e-mail: architectural@crlaurence.com I (800) 421-6144 ext. 7700 I Fax (800) 587-7501 L128
CRL ALUMINUM DOOR HANDLES
For Pricing on CRL Products, Call Toll Free
(800) 421-6144, or Visit crlaurence.com

CRL Extruded Aluminum Pull Handle 2"


(51 mm)
• Solid Extruded Aluminum Handle Mounts to Door 10" CTC
(254 mm)
With Concealed Fasteners
• Two Finishes Available
2-5/16" 4-1/4"
The Extruded Aluminum Pull Handle comes with two studs (59 mm) (108 mm)
that are tapped (1/4-20 thread) into the aluminum door frame 11-7/16"
on 10" (254 mm) centers. Then the Handle is slipped over the (290 mm)
studs and secured with Allen screws to provide a concealed
11-1/8"
fastener look. Available in choice of satin anodized and dark (283 mm)
bronze finishes. One per package.

Pull Handle Mounting Plate

DL915 EXTRUDED ALUMINUM PULL HANDLE DL916 OPTIONAL MOUNTING PLATE


CAT. NO. DESCRIPTION FINISH CAT. NO. DESCRIPTION FINISH
DL915A Pull Handle Satin Anodized DL916A Mounting Plate Satin Anodized
DL915DU Pull Handle Dark Bronze Anodized DL916DU Mounting Plate Dark Bronze Anodized
Minimum order: 1 each. Finishes can be combined for quantity pricing. Minimum order: 1 each. Finishes can be combined for quantity pricing.

CRL Tapered Door Pull CRL Entrance Door Pull


• Solid Pull has Clear Anodized • Solid Pull has Clear Anodized
Brushed Aluminum Finish Brushed Aluminum Finish
• Complete With Through-Bolts for • Complete With Through-Bolts
Mounting 8" CTC for Mounting 10" CTC
(203 mm) 16"
(254 mm)
(406 mm) 11-1/2"
This Tapered Door Pull is made from This solid aluminum Entrance Door (292 mm)
solid aluminum bar stock, tapered on each Pull has a black accent strip along the
end, and has a projection height of 1-1/2" full length of the pull. Projection
(38 mm) from the face of the door. height is 2-7/8" (73 mm) from the face
Brushed aluminum finish is clear anodized. of the door. Brushed aluminum finish
Complete with through-bolts for mounting. is clear anodized. Complete with
Minimum order is one each. through-bolts for mounting. Minimum
CAT. NO. 9590 order is one each. CAT. NO. 9561

CRL Solid Offset CRL Solid Offset


Back-to-Back Pull Handle Single-Sided Pull Handle
for Aluminum Doors (251"mm) for Aluminum Doors
10" CTC
Diameter
• Two Finishes Available • Two Finishes Available (254 mm)
10" CTC
This set of 1" (25 mm) extruded aluminum (254 mm) Extra sturdy 1" (25 mm) extruded aluminum 1"
Offset Door Pulls comes in your choice of Offset Door Pull in your choice of satin anodized (25 mm)
satin anodized or dark bronze finishes. or dark bronze finishes. Diameter
Dimensions: 10" (254 mm) center-to-center Dimensions: 10" (254 mm) center-to-center
mounting holes; 2-1/4" (57 mm) clearance; mounting holes; 2-1/4" (57 mm) clearance;
3-1/4" (83 mm) projection. 3-1/4" (83 mm) projection.

CAT. NO. FINISH CAT. NO. FINISH


2952PRA Satin Anodized 2952A Satin Anodized
2952PRBRZ Dark Bronze Anodized Mounting 2952BRZ Dark Bronze Anodized Mounting
Minimum order: 1 pair. All Pull Handles can be Threaded Shoulder Bolt Minimum order: 1 each. All Pull Handles can
Through-Bolt and
combined for quantity pricing. and Set Screw be combined for quantity pricing. Finish Washer

L129 A C.R. LAURENCE COMPANY crlaurence.com


CRL ALUMINUM DOOR HANDLES
For Pricing on CRL Products, Call Toll Free
(800) 421-6144, or Visit crlaurence.com

CRL Solid Aluminum Push Bar CRL Tubular Offset Single-Sided


and Pull Set Pull Handle

• Available in Five
Architectural Finishes
33" CTC
(838 mm) • Ready to Mount
1"
(25 mm)
10" CTC Diameter
• Two Finishes Available Constructed of 1" (25 mm)
(254 mm)
to Fit 36" (914 mm) 1" stainless steel or brass tubing
(25 mm)
Narrow Stile Doors with 1-1/4" (32 mm) diameter
Diameter
10" CTC
matching backing plates.
(254 mm) Choice of five architectural
1" (25 mm) extruded aluminum Push
finishes to complement any décor.
and Pull Set in your choice of dark
Dimensions: 10" (254 mm)
bronze or satin anodized finish.
center-to-center mounting holes;
Dimensions: 10" (254 mm) center-to-
2" (51 mm) clearance; 3-1/4"
center mounting holes for Offset Pulls,
(83 mm) projection.
33" (838 mm) for Push Bars; 3-1/4"
pull projection; 2-1/4" (57 mm) bar
projection; length to fit 36" (914 mm)
narrow stile doors. CAT. NO. FINISH
CD10BS Brushed Stainless
CD10PS Polished Stainless
CAT. NO. FINISH CD10BR Polished Brass
2958A Satin Anodized CD10SA Satin Anodized
2958BRZ Dark Bronze Anodized Mounting CD10DU Dark Bronze Anodized Mounting
Minimum order: 1 each. All Door Handles can be Threaded Shoulder Bolt Minimum order: 1 each. All Door Handles can be combined for Through-Bolt and
combined for quantity pricing. and Set Screw quantity pricing. Finish Washer

CRL Makes Custom Door Handles


• Solid or Tubular Construction Imagination Design Reality
• Available Diameters: 3/4",
1", 1-1/4", and 1-1/2"
(19, 25, 32, and 38 mm)
• Over 20 Standard Finishes
• Custom Finish Matching
• Available in Brass,
Stainless Steel, It starts with your idea, but CRL can make it a reality.
Aluminum or Bronze Metals Our 270,000 square foot manufacturing plant in
Los Angeles can make just about any design you might
• Special CNC Machined Shapes imagine. Just send your specifications to our Technical MANUFACTURED IN THE USA
BY C.R. LAURENCE
An ISO9001:2000 Certified Company
Sales Staff and they will assist you in designing the
• Various Fastening Options Custom Handle required for your project. Our engineering
for Most Applications staff can supply you with a 3D CAD model of your
design to help ensure that we make exactly what you
• Round, Square or Flat Bar Stock desire.
• Custom Cast Metal Designs For additional information, or to begin the design
process, contact CRL Technical Sales at (800) 421-6144
• Bending, Mitering, in the U.S., (877) 421-6144 from Canada, or (323) 588-1281
International. Ask for Ext. 7700. You can also e-mail us
and Welding through our web site at crlaurence.com. From the home
• Metal Etched Logos page click on Contact Us, and then click on Technical
Sales for Commercial Products.

e-mail: architectural@crlaurence.com I (800) 421-6144 ext. 7700 I Fax (800) 587-7501 L130
MORE CRL PRODUCTS AND INFORMATION SOURCES
CRL Wedge-Lock™ Door Rails
• Full Length Door Rails for Single or Double Doors, MANUFACTURED IN THE USA
BY C.R. LAURENCE
Available in Five Different Profiles An ISO9001:2000 Certified Company

• Six Popular Stock Finishes


• Stocked for 3/8", 1/2" and 3/4"
(10, 12, and 19 mm) Glass
• Custom Finishes, Lengths
and Heights Available
• Matching Profile Sidelite
Rails Also Available

U.S. Patents 6,434,905 and 6,912,818 B2 2-5/16" 4" 4" 6" 10"
Foreign Patents Pending Low Profile Tapered Square Square Square

CRL Heavy CRL Laguna CRL Push or Pull


Glass Sliding Pivot Door Indicators for Doors
Doors System • Variety of Styles and Finishes Available
• Variety of Styles and • Mix and Match for • Installs in Seconds
Finishes Available for Various Configurations • Big, Easy to Read Letters
Use With 3/8" or 1/2" • High Quality Stainless • Also Available in French or Spanish
(10 or 12 mm) Steel Material
Tempered Glass
• Maximizes Glass and
• Each Unit Custom Built Minimizes Hardware
to Fit the Opening
• For 3/8" or 1/2"
• Saves Valuable Floor (10 or 12 mm)
Space - Will Not Project Tempered Glass
Out of the Door Opening

CRL’s SPS Stacking Partition System Featuring Intelli-Track™ (Patent Pending) VISIT THE WORLD Of
• Provides the 'All-Glass' Look When crlaurence.com
Closed and the Wide Open Look
When Opened
• Glass Panels Disappear from Sight
When Parked in the Parking Closet
• A Large Variety of Parking
Configurations to Accommodate
Almost Any Installation • Access to All CRL Products • CRL Locations with Addresses,
• Glass Panels Can Be Simply Stacked Through Our Easy-to-Use A to Z Directions, Phone and Fax
Against the End Wall Product Index Numbers
or Stored Out • See All of the CRL Catalogs • Direct E-Mail Connections
of Sight in a Closet to CRL Departments
• Technical Articles and Product
• Directional Rollers Support • Account Policies and
Provide Door Control Credit Terms
• Ordering and Shipping
Information • A Calendar of Industry
• Help in Using the Site Trade Shows

Visit our "Installation Image Gallery" at crlaurence.com


to see beautiful completed jobs using CRL products
CRL Specialty Catalogs can be viewed online at crlaurence.com

Architectural Door Controls Hospitality and Architectural Frameless Shower Transaction and Architectural
AVD4992b-LP10-1/09

Hardware Hardware and Service Railing Systems Door Hardware Security Metals
Accessories Hardware and Supplies Hardware
AH10 DC07 HS07 7730
Ask for Extension HR09 SD10 TH10 AM09

A C.R. LAURENCE COMPANY crlaurence.com

You might also like