You are on page 1of 14

TurboForce™ Diamond

Impregnated Drill Bits


Advantages

▌ Longer Intervals Drilled


▌ Higher Rates of Penetration
in Interbedded Formations
▌ Superior Reliability with
Increased Diamond Content
▌ Lower Cost per Foot
▌ Better Design Aligned
to Specific Applications

© 2014 HALLIBURTON. ALL RIGHTS RESERVED. 2


TurboForce™ Drill Bit Differentiators

Features Benefits
Mass Balancing Proprietary mass distribution calculation and
balancing methods
• Negates unbalanced centrifugal forces
• Increases stability

Continuous Shoulder Increased diamond content


• Increases run length
• Increases stability

Hydro-Dynamic Bridges Improved cleaning/cooling of cutting structure


• Strengthens high diamond volume blades
• Directs fluid to be more effective

Wear Indicator Better and easier determination of dull condition


• Optimizes decisions for product usage
• Increases accuracy for product optimization

Optimized Active Gauge Optimized active gauge geometry


• Increases stability
• Reduces differential sticking

© 2014 HALLIBURTON. ALL RIGHTS RESERVED. 3


Mass Balancing

▌ The TurboForce™ mass balancing and distribution method:


 Reduces the mass imbalance force
 Results in longer runs

Unbalanced Internally Balanced


If RPM = 1200 If RPM = 1200
Then force angle = 158° Then force angle = ---
Centrifugal force = 275 N Centrifugal force = 0 N

© 2014 HALLIBURTON. ALL RIGHTS RESERVED. 4


Continuous Shoulder

▌ The TurboForce™ optimized shoulder profile:


 Stability is improved with increased contact area
 Drill bit life is improved with increased diamond content
 Results in longer runs

TurboForce™ Bit IQ Series™ Bit

© 2014 HALLIBURTON. ALL RIGHTS RESERVED. 5


Hydro-Dynamic Bridges

▌ TurboForce™ hydro-dynamic bridges:


 Improve flow across bottom hole
 Result in better cleaning and cooling

© 2014 HALLIBURTON. ALL RIGHTS RESERVED. 6


Wear Indicator

▌ TurboForce™ bits have a unique


wear indicator:
 Additive uniquely
developed in a proprietary NEW

manufacturing process
 Results in easily
recognizable and more
precisely measured bit wear

WORN

© 2014 HALLIBURTON. ALL RIGHTS RESERVED. 7


Optimized Active Gauge

▌ TurboForce™ new active gauge geometry:


 Increases stabilization and lowers torque
 Results in reduced differential sticking and less chance
of a stuck bit

© 2014 HALLIBURTON. ALL RIGHTS RESERVED. 8


Case History – 8 ½ TF510D – Grady County, Oklahoma

 Bromide Formation
 Footage: 390 ft
 ROP: 6.9 ft/hr
 RPM: 1140
 WOB: 5-8 Klbs
 Dull Grade: 6-7-WT-A-X-In-No-TD

© 2014 HALLIBURTON. ALL RIGHTS RESERVED. 9


Case History – 8 ¼ TF510 – Middle East

 Red Sea
 Footage: 798ft
 ROP: 4.23 ft/hr
 RPM: 866
 WOB: 10-15 Klbs
 Dull Grade: 5-8–WT–S–X-In–No-CP

© 2014 HALLIBURTON. ALL RIGHTS RESERVED. 10


Case History – 8 ½ TF610D – Grady County, Oklahoma

 Bromide 2 & 3 Formation


 Footage: 303 ft
 ROP: 10.1 ft/hr
 RPM: 1200
 WOB: 3-8 Klbs
 Dull Grade: 7-8–RO–A–X-In–BT-PR

© 2014 HALLIBURTON. ALL RIGHTS RESERVED. 11


Case History – 8-1/2 TF616D in Congo for ENI

 8- ½ TF616D
 M’boundi Field
 Djeno conglomerate 65%
 Footage: 481 m (out 1598m)
 ROP: 4.1 m/hr
 WOB: 4-7 T
 Neyrfor 1300 RPM
 Dull Grade: 5-2–CR–C–X-In–CT-PR
 TF good run in very hard
conglomerate

© 2014 HALLIBURTON. ALL RIGHTS RESERVED. 12


Case History – 8-1/2 TF616D in Congo for ENI

 Third longest run of the field in Djeno Formation

iQ TF

© 2014 HALLIBURTON. ALL RIGHTS RESERVED. 13


Summary

▌ TurboForce™ Diamond Impregnated Drill Bits


 Longer Intervals Drilled
 Higher Rates of Penetration in
Interbedded Formations
 Superior Reliablity with Increased
Diamond Content
 Lower Cost per Foot
 Better Design Aligned
to Specific Applications

© 2014 HALLIBURTON. ALL RIGHTS RESERVED. 15

You might also like