Professional Documents
Culture Documents
Catalog 2600-600-2/USA
! WARNING
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED
HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide
product and/or system options for further investigation by users having technical expertise. It is important that you analyze
all aspects of your application including consequences of any failure, and review the information concerning the product
or system in the current product catalog. Due to the variety of operating conditions and applications for these products
or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products
and systems and assuring that all performance, safety and warning requirements of the application are met.
The products described herein, including without limitation, product features, specifications, designs, availability and
pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.
Offer of Sale
The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its
authorized distributors. This offer and its acceptance are governed by the provisions stated on the separate page of this
document entitled “Offer of Sale”.
ROLLER
BEARING
MAXIMUM
VOLUME
ADJUSTMENT
SHAFT
NEEDLE
BEARING
Fluid Recommendations
Premium quality hydraulic oil with a viscosity range
between 150-250 SSU (30-50 cst.) at 100°F (38°C).
Normal operating viscosity range between 80-1000
SSU (17-180 cst.). Maximum start-up viscosity is 4000
SSU (1000 cst.).
Performance Information
Series PV, Pressure Compensated, Variable Volume,
Piston Pumps
Features
• High Strength Cast-Iron Housing for high reliability
and quiet operation
• Modular Controls for field convertability
• Large Control Piston for fast response
De-stroking in 45 mS
On-stroking in 70 mS
• Thru-Shaft Option with 100% thru torque capability
• 9 Piston Design to minimize ripple
• Multiple Pressure Control with valves mounted
directly on pump
Specifications
Controls Pressure Ratings: 5000 PSI (350 bar) Continuous
• Pressure Compensation 6000 PSI (420 bar) Peak
• Load Sensing
• Remote Pressure Compensation Speed Ratings: 600 to 2750 RPM
• Adjustable Maximum Volume Stop
• Electrohydraulic Pressure Inlet Condition: 230 PSI (16 bar)
• Dual and Tri-Pressure Maximum Inlet Charge
• Low Pressure Standby 5 In. Hg. Max. Vacuum at
1800 RPM
• Horsepower Limiting
PV 1
Multiple Pump Displace- Rotation Variations Shaft & Volume Thru-Shaft Multiple Seals Control Design
Pumps Variable ment Mounting Stop Option Pump Options Series
Piston Option Option (Not
Required
Code Seals When
N Nitrile Ordering)
Displacement
Code
(cc/rev.) V Viton
Code Volume
016 16 Stop Option
020 20 Max. Vol.
1 Multiple Pump
023 23 Stop Code
Option
1 Single Pump with
Shipping Cover
PV of Same Size
Code Rotation* 2
Mounted
R CW
Pump with SAE “A”
L CCW 4
Pilot Mounted
* As viewed from 5 Pump with SAE “AA”
shaft end. Pilot Mounted
Performance Curves
Horsepower HP
Delivery GPM
Delivery GPM
Efficiency - %
Efficiency - %
12 24 60 12 24 60
8 16
Flow /GPM 40 8 16 40
Input HP
Input HP at Full
at Full Stroke
4 8 20 4 8 20
Stroke
power power
Compens ated Horse Compens ated Horse
0 0 0 0 0 0
0 1000 2000 3000 4000 5000 0 1000 2000 3000 4000 5000
Pressure - PSI Pressure - PSI
NOTE: The efficiencies and data in the graphs are good WHERE:
only for pumps running at speeds shown and stroked to
Q = Actual Output Flow in GPM
maximum. To calculate approximate horsepower for
the other conditions, use the following formula: PSI = Pressure At Pump Outlet
CHp= Input Horsepower @ Full compensation
HP = [ Q x (PSI)
1714 ] + (CHp) @ 1800 RPM (from graph read at
operating pressure)
Dimensions - Standard
Millimeter equivalents for inch dimensions are shown in (**). 1.81
(46.0)
NOTES:
1. Pump shown is a clockwise rotation pump. For counterclockwise
rotation the inlet and outlet ports will be reversed with the gauge
and drain ports on the outlet side.
SAE “BB” SPLINE SHAFT
2. Pump shown with standard pressure compensator (P*S). 15T 16/32 PITCH
30° INVOLUTE
Splined Shaft
5.20
INLET PORT (130.0)
1-1/4" SAE 4 BOLT FLANGE LIFT HOOK THREAD 3.15
STANDARD PRESSURE 5/16-18UNC-2B (80.0)
SERIES (CODE 61)
1.26 2.05
MAXIMUM VOLUME (32.0)
ADJUSTMENT (52.1)
SENSITIVITY: 1.000 (25.4)
1.7 CC/REV ø .998 (25.3)
PER TURN
4.49
2.52 (114.0)
(64.0)
1.71
(43.4) 4.92
(125.0)
4.000 (101.6)
.65 ø 3.998 (101.5)
(16.5)
5.23
(132.8) CASE DRAIN PORT
SAE-10 STRAIGHT
THREAD O-RING PORT
5.99 (7/8-14UN-2B REF.) Rear View
(152.1)
6.88
SENSITIVITY: (174.8)
“W” - 950 PSI/TURN
“H” - 570 PSI/TURN
“D” - 380 PSI/TURN Top View
10.33 5.750
(262.4) (146.1)
3.536
GAUGE PORT (89.8)
.35 (8.9)
SAE-4 STRAIGHT
5.35 THREAD O-RING PORT
(135.8) (7/16-20UNF-2B REF.)
Side View
MOUNTING INTERFACE
NG 6, CETOP 3
SENSITIVITY
200 PSI
PER TURN
4.49 4.49
(114.0) (114.0)
12.81
(325.4)
FROM
MOUNTING
SURFACE
7.73
(196.3)
4.49
(114.0)
Thru-Shaft
Option A B C D E F G
2.001/2.003 1.625 8.84
Y (50.83/50.88) (41.3) 5/16-18UNC 9 Tooth 20/40 Pitch (224.5) N/A N/A
3.251/3.253 2.094 8.84
A (82.58/82.63) (53.2) 3/8-16UNC 9 Tooth 16/32 Pitch (224.5) N/A N/A
3.150/3.152 DIN 5480 Spline 8.84 1.74
H (80.02/80.07) N/A N/A N25 x 1.5 x 15 (224.5) (44.2) 3/8-16UNC
5.00
(127.0)
B B E
G
F F D
Performance Information
Series PV, Pressure Compensated, Variable Volume,
Piston Pumps
Features
• High Strength Cast-Iron Housing for high reliability
and quiet operation
• Modular Controls for field convertability
• Large Control Piston for fast response
De-stroking in 45 mS
On-stroking in 70 mS
• Thru-Shaft Option with 100% thru torque capability
• 9 Piston Design to minimize ripple
• Multiple Pressure Control with valves mounted
directly on pump
Specifications
Controls Pressure Ratings: 5000 PSI (350 bar) Continuous
6000 PSI (420 bar) Peak
• Pressure Compensation
• Load Sensing
Speed Ratings: 600 to 2400 RPM
• Remote Pressure Compensation
• Adjustable Maximum Volume Stop
Inlet Condition: 230 PSI (16 bar)
• Electrohydraulic Pressure Maximum Inlet Charge
• Dual and Tri-Pressure 5 In. Hg. Max. Vacuum at
• Low Pressure Standby 1800 RPM
• Horsepower Limiting
Case Drain 30 PSI (2 bar) Maximum
Schematic Symbol Conditions:
(Basic Pump)
Operating -40°F to 160°F
Temp. Range: (-40°C to 70°C)
* The noise level values are based on anechoic room measurements at a distance of 1 meter in accordance with DIN 45645.
PV 1
Multiple Pump Displace- Rotation Variations Shaft & Volume Thru-Shaft Multiple Seals Control Design
Pumps Variable ment Mounting Stop Option Pump Options Series
Piston Option Option (Not
Required
Code Seals When
N Nitrile Ordering)
Displacement
Code V Viton
(cc/rev.) Volume
Code
032 32 Stop Option
040 40 Multiple Pump
Max. Vol. Code
1 Option
046 46 Stop
Single Pump with
1
Shipping Cover
2 PV of Same Size
Mounted
Code Rotation *
Pump with SAE ‘A’
R CW 4
Pilot Mounted
L CCW
Pump with SAE ‘B’
7
* As viewed from Pilot Mounted
shaft end.
Performance Curves
Horsepower HP
Delivery GPM
Delivery GPM
Efficiency - %
Efficiency - %
18 60 60 24 60 60
Flow/ GPM
Flow /GPM
12 40 40 16 40 40
Input HP Input HP
at Full at Full
Stroke Stroke
6 20 20 8 20 20
rsepowe r
Compe nsated Ho Horsepower
Compensated
0 0 0 0 0 0
0 1000 2000 3000 4000 5000 0 1000 2000 3000 4000 5000
Pressure - PSI Pressure - PSI
NOTE: The efficiencies and data in the graphs are good only WHERE:
for pumps running at speeds shown and stroked to maximum. Q = Actual Output Flow in GPM
To calculate approximate horsepower for the other conditions,
use the following formula: PSI = Pressure At Pump Outlet
CHp = Input Horsepower @ Full compensation
@ 1800 RPM (from graph read at
HP = [ Q x (PSI)
1714 ] + (CHp) operating pressure)
Dimensions — Standard
Millimeter equivalents or inch dimensions are shown in (**).
2.19
NOTES: (55.6)
1. Pump shown is a clockwise rotation pump. For counterclockwise
rotation the inlet and outlet ports will be reversed with the gauge
and drain ports on the outlet side.
SAE “C” SPLINE SHAFT
2. Pump shown with standard pressure compensator (P*S). 14 TOOTH 12/24 PITCH
30° INVOLUTE SPLINE
Splined Shaft
.83
(21.1)
5.23
(132.8)
CASE DRAIN PORT
SAE-12 STRAIGHT
THREAD O-RING PORT
7.07 (1-1/16-12UN-2B REF.) Rear View
(179.6)
SENSITIVITY: 7.96
“W” - 950 PSI/TURN (202.2)
“H” - 570 PSI/TURN
“D” - 380 PSI/TURN
Top View
7.125
(180.9)
11.50 2.59
(292.1) (65.8) 4.508
(114.5)
GAUGE PORT .50
SAE-4 STRAIGHT (12.7)
THREAD O-RING PORT
(7/16-20UNF-2B REF.) .312 (7.9)
SAE KEY
5.98 .55 (14.0)
(151.9) 4 PLACES
4.17 4.25
(105.9) 2.68 (108.0) ø5.000 (127.0)
(68.1) 1.97 4.998 (126.9)
(50.0)
4.508
(114.5)
7.13
(181.1) .67 1.391 (35.3) .71 (18.0)
(17.0) 1.381 (35.1) 2 PLS.
NAMEPLATE ROTATION
OUTLET PORT 7.60 ARROW 4.32 4.32
1" SAE 4 BOLT FLANGE (193.0) (109.7) (109.7)
HIGH PRESSURE SERIES 7.68
(CODE 62) (195.1) Front View
9.39
(238.5)
Side View
MOUNTING INTERFACE
NG 6, CETOP 3
SENSITIVITY
200 PSI
PER TURN
5.12 5.12
(130.0) (130.0)
14.25
(361.9)
FROM
MOUNTING
SURFACE
8.20
(208.3)
5.12
(130.0)
Thru-Shaft
Option A B C D E F G
6.54
(166.1)
B B
C C G
Performance Information
Series PV, Pressure Compensated, Variable Volume,
Piston Pumps
Features
• High Strength Cast-Iron Housing for high reliability
and quiet operation
• Modular Controls for field convertability
• Large Control Piston for fast response
De-stroking in 45 mS
On-stroking in 70 mS
• Thru-Shaft Option with 100% thru torque capability
• 9 Piston Design to minimize ripple
• Multiple Pressure Control with valves mounted
directly on pump
Specifications
Controls Pressure Ratings: 5000 PSI (350 bar) Continuous
• Pressure Compensation 6000 PSI (420 bar) Peak
• Load Sensing
• Remote Pressure Compensation Speed Ratings: 600 to 2100 RPM (PV063)
600 to 2000 RPM (PV080)
• Adjustable Maximum Volume Stop
600 to 1900 RPM (PV092)
• Electrohydraulic Pressure
• Dual and Tri-Pressure Inlet Conditions: 230 PSI (16 bar)
• Low Pressure Standby Maximum Inlet Charge
• Horsepower Limiting 5 In. Hg. Max. Vacuum at
1800 RPM
Schematic Symbol
(Basic Pump) Case Drain 30 PSI (2 bar) Maximum
Conditions:
* The noise level values are based on anechoic room measurements at a distance of 1 meter in accordance with DIN 45645.
PV
Multiple Pump Displace- Rotation Variations Shaft & Volume Thru-Shaft Multiple Seals Control Design
Pumps Variable ment Mounting Stop Option Pump Options Series
Piston Option Option (Not
Required
When
Code Seals Ordering)
N Nitrile
Displacement
Code V Viton
(cc/rev.)
063 63
080 80 Code Multiple Pump Option
092 92 Single Pump with
1
Shipping Cover
2 PV of Same Frame Size
Mounted
Pump with SAE ‘A’ Pilot
Code Multiple Pumps Code Rotation* 4
Mounted
Omit Single Pump R CW
Pump with SAE ‘B’ Pilot
L CCW 7
Factory mounted Mounted
— to rear of another * As viewed from Pump with SAE ‘C’ Pilot
pump 8
shaft end. Mounted
K 125mm Pilot Side * Maximum pressure adjustment not included, but recommended.
** Valve to be mounted at factory must be ordered as a separate line
*15 Tooth Spline item. Consult factory.
Performance Curves
Horsepower HP
Delivery GPM
Delivery GPM
Efficiency - %
Efficiency - %
30 120 Flow /GPM 60 60 150 60
Flow /GPM
20 80 40 40 100 40
Input HP Input HP
at Full at Full
10 40 20 20 50 Stroke 20
Stroke
Compensated Hors
epower Compensat ed Horsepower
0 0 0 0 0 0
0 1000 2000 3000 4000 5000 0 1000 2000 3000 4000 5000
Pressure - PSI Pressure - PSI
Dimensions — Standard
Millimeter equivalents for inch dimensions are shown in (**). 2.95
(74.9)
NOTE: SAE “D” SPLINE
13T 8/16DP
1. Pump shown is a clockwise rotation pump. For counterclockwise 30° INVOLUTE
rotation the inlet and outlet ports will be reversed with the gauge and
drain ports on the outlet side.
2. Pump shown with standard pressure compensator (P*S).
Splined Shaft
INLET PORT
2" SAE 4 BOLT FLANGE LIFT HOOK THREAD
STANDARD PRESSURE 5/16-18UNC-2B
SERIES (CODE 61) 1.71
(43.4)
7.64
MAXIMUM VOLUME (194.1)
ADJUSTMENT
SENSITIVITY: 4.33
3.8CC/REV. (110.0)
PER TURN
ø 1.750 (44.5)
1.749 (44.4)
6.26
1.71 (159.0)
(43.4) 3.74
(95.0)
5.23 1.18
(132.8) (30.0)
7.12
(180.8) 5.16
(131.1)
5.31
(134.9) 3.44
(87.4) ø 6.000 (152.4)
9.06 5.998 (152.3)
1.89
(230.1) (48.0)
6.364
(161.6
Side View
MOUNTING INTERFACE
NG 6, CETOP 3
SENSITIVITY
200 PSI
PER TURN
6.26 6.26
(436.9) (436.9)
17.20
(436.9)
FROM
MOUNTING
SURFACE
8.99
(228.3)
6.26
(436.9)
Thru-Shaft
Option A B C D E F G
3.251/3.253 2.094 12.84
A N/A 3/8-16UNC N/A 9 Tooth 16/32 Pitch
(82.57/82.62) (53.18) (326.1)
4.001/4.003 2.875 1.786 12.84
B 1/2-13UNC 1/2-13UNC 13 Tooth 16/32 Pitch
(101.62/101.67) (73.02) (45.36) (326.1)
4.001/4.003 2.875 1.786 12.84
W 1/2-13UNC 1/2-13UNC 15 Tooth 16/32 Pitch
(101.62/101.67) (73.02) (45.36) (326.1)
5.001/5.003 3.560 2.254 12.84
C 5/8-11UNC 1/2-13UNC 14 Tooth 12/24 Pitch
(127.02/127.07) (90.42) (57.25) (326.1)
4.922/4.924 2.783 DIN 5480 Spline 12.84
K N/A N/A 5/8-11UNC
(125.02/125.07) (70.68) N40 x 1.5 x 25 (326.1)
8.31
(211.1)
B B G
C
D
A
F
Performance Information
Series PV 130/180 Pressure Compensated, Variable
Volume, Piston Pumps
Features
• High Strength Cast-Iron Housing for reliable and
quiet operation
• Modular Controls for field convertibility
• Large Control Piston for smooth/fast response...
De-stroking in 90 mS
On-stroking in 145 mS
• Multiple Pressure Control with valves mounted
directly on pump
Controls
• Pressure Compensation
Specifications
• Load Sensing
Pressure Ratings: 5000 PSI (350 bar) Continuous
• Remote Pressure Compensation 6000 PSI (420 bar) Peak
• Adjustable Maximum Volume Stop
• Electrohydraulic Pressure Speed Ratings: 750 to 1800 RPM
• Dual and Tri-Pressure
• Low Pressure Standby Inlet Condition: 725 PSI (50 bar) Maximum
• Horsepower Limiting 3 In-Hg Vacuum at 1500 RPM
0 In-Hg Vacuum at 1800 RPM
Schematic Symbol
Case Drain 7 PSI (.5 bar) Maximum
(Basic Pump) Conditions:
Installation Data
Housing Material: Cast Iron
See Installation Information on page 3 of this catalog
for specific recommendations pertaining to system
cleanliness, fluids, start-up, inlet conditions, shaft Filtration: Maintain SAE Class 4 (ISO 16/13)
alignment, drain line restrictions and other important
factors relative to the proper installation and use of Mounting: SAE “D” 4-Bolt Flange
these products.
PV R 1 T 1
Variable Series Rotation Pump Shaft Displacement Multiple Seals Compensator Design
Piston & Size Variations Limited Thru-Shaft Pump Series
Pump Adapter/ Option (Not
Pump Required
When
Ordering)
Code Rotation
R CW Code Seals
N Nitrile
V Viton
Displacement
Code
(cc/rev.) Code Multiple Pump Option
130 130 1 Single Pump
180 180
Code Compensator
Code Pump Variations • • • Standard Pressure Compensator
1 Standard Adjustment Type
S Screw With Nut
9* Reduced Stroke
Pressure Range
* Specify reduced
W 70-350 bar (1000-5000 PSI)
displacement in cc/rev.
when ordering. H 40-210 bar (580-3050 PSI)
D 10-140 bar (150-2000 PSI)
Option
F Fast Response
• • • Remote Pressure Compensator
Code Shaft & Mounting Flange Control Port
Shaft Flange Size C SAE Dash-4 (7/16-20UNF) *
1 NG6/Cetop3 Pattern *
D SAE Keyed SAE “D” 4-Bolt
Z NG6 with Pressure Valve Mounted **
K Metric Keyed 160mm 4-Bolt
Control Type
R Remote Compensator
F Load Sensing Compensator
Option
F Fast Response
• L • Horsepower Compensator
Displacement Control Port
Code
Limiter C NG6 with PVAC1PCS *S** Valve Mounted
1 Max. Volume Stop Z NG6 with Pressure Valve Mounted **
HP setting at 1800 RPM
K 30.0 (1050 in-lb Torque)
M 35.0 (1225 in-lb Torque)
PV130
Performance Curves
40 160 80 60 240 80
Flow/GPM Flow/GPM
Horsepower HP
Horsepower HP
Delivery GPM
Delivery GPM
Efficiency - %
Efficiency - %
30 120 60 45 180 60
er e r
p ow pow
rse rse
20 80
Ho 40 30 120
Ho 40
w w
ll Flo ll Flo
10 40 Fu 20 15 60 Fu 20
power power
Compensated Horse Compensated Horse
0 0 0 0 0 0
0 1000 2000 3000 4000 5000 0 1000 2000 3000 4000 5000
Pressure - PSI Pressure - PSI
Flow/GPM
Delivery GPM
Delivery GPM
Efficiency - %
Efficiency - %
45 180 60 60 300 60
r
we we
r
e po po
30 120
H ors 40 40 200
ors
e 40
w H
Flo low
Fu
ll ll F
15 60 20 20 100 Fu 20
HP = [ GPM x (PSI)
1714
] + Compensated HP
Dimensions – Standard
Millimeter equivalents for inch dimensions are shown in (**).
NOTES:
1. Pump shown is a clockwise rotation pump. For counterclockwise 12.00
rotation the inlet and outlet ports will be reversed with the gauge (304.8)
and drain ports on the outlet side. TO MOUNTING
FLANGE
2. Pump shown with standard pressure compensator (P*S).
INLET PORT
SAE 2-1/2"
STANDARD
PRESSURE SERIES
4-BOLT FLANGE
(CODE 61)
View A
Inlet Port
SAE-16 STRAIGHT
THREAD O-RING PORT
(1 5/16-12UNF-2B REF.)
8.42
(213.9)
7/16-14UNC-2A 1.89 6.46
(48.0) View (164.1)
A
7.56
(192.0)
1.37 4.33
(34.8) (110.0)
7.68
(195.1)
3.94
ø 1.750 (44.5) (100.1)
5.23 1.748 (44.4)
(132.8)
ø 6.000 (152.4)
5.998 (152.3)
7.87 (199.9)
12.30 (312.4)
15.67 (398.0)
14.17 (359.9)
.31 (7.9) 2.94
(74.7)
.50 (12.7)
7/16 SAE
KEY
ø 9.000
(228.6)
OUTLET
PORT
SAE 1-1/4" ø 1.946 (49.49)
HIGH 1.936 (49.17)
PRESSURE
SERIES
4-BOLT
FLANGE
(CODE 62)
.83
(21.1)
11.61 (294.9)
Front View
Side View
Performance Information
Series PV250 Pressure Compensated, Variable
Volume, Piston Pumps
Features
• High Strength Cast-Iron Housing for reliable and
quiet operation
• Modular Controls for field convertibility
• Large Control Piston for smooth/fast response...
De-stroking in 90 mS
On-stroking in 145 mS
• Multiple Pressure Control with valves mounted
directly on pump
Controls
• Pressure Compensation
Specifications
• Load Sensing
Pressure Ratings: 5000 PSI (350 bar) Continuous
• Remote Pressure Compensation
6000 PSI (420 bar) Peak
• Adjustable Maximum Volume Control
• Electrohydraulic Pressure Control
Speed Ratings: 750 to 1800 RPM
• Dual and Tri-Pressure
• Low Pressure Standby Inlet Condition: 725 PSI (50 bar) Maximum
• Horsepower Limiting 3 In-Hg Vacuum at 1500 RPM
0 In-Hg Vacuum at 1800 RPM
Schematic Symbol
Case Drain 7 PSI (.5 bar) Maximum
(Basic Pump) Conditions:
Installation Data
Housing Material: Cast Iron
See Installation Information on page 3 of this catalog
for specific recommendations pertaining to system
cleanliness, fluids, start-up, inlet conditions, shaft Filtration: Maintain SAE Class 4 (ISO 16/13)
alignment, drain line restrictions and other important
factors relative to the proper installation and use of Mounting: SAE “E” 4-Bolt Flange
these products.
* Since many variables such as mounting, tank style, plant layout, etc., effect noise levels, it cannot be assumed that the above readings wil be
equal to those in the field. The above values are for guidance in selecting the proper pump. Noise levels are A-weighted, mean sound pressure
levels at 1 meter from the pump, measured and recorded in accordance with applicable ISO and NFPA standards.
PV R 1 T 1
Variable Series Rotation Pump Shaft Displace- Thru-Shaft Multiple Seals Compensator Design
Piston & Size Variations ment Adapter/ Pump Series
Pump Limited Pump Option (Not
Required
When
Ordering)
Code Seals
N Nitrile
Displacement V Viton
Code
(cc/rev.)
250 250
Performance Curves
Fluid: Standard Hydraulic Oil 100 SSU @ 120°F (49°C)
Flow/GPM
Overall Efficiency Overall Efficiency
80 300 80 100 400 80
Flow/GPM
Horsepower HP
Horsepower HP
Delivery GPM
Delivery GPM
Efficiency - %
Efficiency - %
r
60 225
e r 60 75 300
owe 60
ow ep
se
p rs
r Ho
40 150 Ho 40 50 200
ow
40
w l
ll Flo l lF
Fu Fu
20 75 20 25 100 20
Compensated Ho
rsepower Horsepower
Compensated
0 0 0 0 0 0
0 1000 2000 3000 4000 5000 0 1000 2000 3000 4000 5000
Pressure - PSI Pressure - PSI
NOTE: The efficiencies and data in the graphs are
accurate for pumps running at 1200 or 1800 RPM and
maximum stroke. To calculate approximate horsepower
HP = [ GPM x (PSI)
1714 ] + Compensated HP
SENSITIVITY
200 PSI
PER TURN
10.00
9.34 9.34 (254.0)
(237.2) (237.2)
Dimensions – Standard
Millimeter equivalents for inch dimensions are shown in (**).
NOTES:
1. Pump shown is a clockwise rotation pump. For counterclockwise
rotation the inlet and outlet ports will be reversed with the gauge and
drain ports on the outlet side.
2. Pump shown with standard pressure compensator (P*S). 12.99 (329.9)
12.80 (325.1)
GAUGE PORT 6.89 (175.0)
SAE-4 STRAIGHT
THREAD O-RING PORT 6.00 (152.4)
(7/16-20UNF-2B REF.)
INLET PORT
SAE 3 1/2
STANDARD PRESSURE 2.36
SERIES 4-BOLT FLANGE (59.9) 10.17 9.34
(CODE 61) (258.3) (237.2)
5.37
ø 6.500 (165.10) (136.4)
6.498 (165.05)
11.02
8.40 (279.9)
(213.4)
.50
(12.7)
5.51
(139.9)
CASE DRAIN PORT
SAE-20 STRAIGHT
THREAD O-RING PORT
(1 5/8-12UN-2B REF.)
9.84 (249.9)
16.79 (426.5)
1.48 5/8-11UNC-2B
(37.6) X 1.26 DP -4 PLS
Top View Rear View
ALTERNATE CASE
DRAIN PORT FOR
VERTICAL MOUNTS
SAE-8 STR. THREAD
O-RING PORT
LIFT HOOK (3/4-16UN-2B REF.)
2 PLACES
22.20 (563.8) 6.93 (176.0)
20.18 (528.3) 5.08
(129.0)
7.36 (193.0)
12.50
(317.5)
1.02
(25.9)
5.40
(137.2) ø 2.000 (50.80)
1.998 (50.74)
11.00
(279.4)
2.22
(56.4)
1.00
(25.4) 11.00 (279.4)
6.50 (16.51) 5.98 (151.9) .63
(16.0) Front View
15.87 (403.1) 3.84
(97.5)
18.60 (472.4)
OUTLET PORT
SAE 1 1/2
HIGH PRESSURE Side View
SERIES 4-BOLT
(CODE 62)
COMPENSATOR COMPENSATOR
SPOOL SPRING
COMPENSATOR
ADJUSTING
SCREW
ROD
AREA
SWASH
PLATE
BORE
AREA FLOW
OUTLET
PORT
PRESSURE
INLET
PORT
SWASH
PLATE
FLOW
OUTLET
PORT
PRESSURE
INLET
PORT NOTE:
If the control port is blocked,
the pump will be a fixed
displacement pump.
VARIABLE
ORIFICE
SWASH
PLATE
SYSTEM FLOW
OUTLET
PRESSURE PORT
BORE
END
PRESSURE
INLET
PORT
Horsepower Compensator Control (*LC) connect outlet pressure to the spring cavity of the *F1
The horsepower requirement to operate a pump is compensator and the direct acting relief mounted in
the product of flow rate, pressure, and pump efficiency. the horsepower control block. With the compensator
With a constant flow rate, the horsepower requirement spool pressure balanced, the additional spring force
increases with pressure. When the work pressure will keep the spool pushed to the left and the pump
reaches the pump compensating pressure, the flow will be a maximum swash plate tilt angle. When the
working pressure reaches the setting of relief valve in
rate will reduce along with the horsepower
the HP control block, oil will flow through the orifice in
requirement. In application, minimizing the input power
the gauge port causing a pressure differential across
while maximizing the pump output is very important.
the compensator. When the differential is equal to the
In many of these applications, the system requirements
compensator spring setting, the compensator spool
are well suited for higher flows at lower pressures
will move to the right and meter oil into the bore end
and lower flows at higher pressures. Both conditions
of the servo piston and destroke the pump. As the
require a relatively low input horsepower, but with a
pump starts to destroke, the servo piston and cam
standard pressure compensated pump, it must go to
piston will move to the right. As the cam piston moves
maximum pressure at maximum flow before the flow
to the right, it increases the spring setting of the relief
(and input horsepower) will reduce.
valve in the HP control block, which in turn increases
The horsepower control was designed for these the pressure in the compensator spring cavity. The
applications. The horsepower control on the PV pump cam piston and relief valve in the HP control block is
uses the load sense compensator (*FC or *F1) along a mechanical/pressure feedback system between the
with a horsepower control block. Shown in the figure swash plate tilt angle (pump flow) and the pressure in
below, the horsepower block consists of a cam piston the compensator spring cavity (outlet pressure minus
that moves with the servo piston and a direct acting differential). By machining a special profile on the
relief that rides on the side of the cam piston. The side of the cam piston, the relationship of outlet flow
compensator used in the figure is the *F1 with a direct versus system pressure as shown in the graph can
acting relief mounted on top of the compensator be controlled. The advantage of this control is to be
housing using the NG6 machined interface. Tubing is able to use a smaller prime mover and still meet all
then plumbed externally using the gauge port to the pressure and flow requirements of the system.
COMPENSATOR COMPENSATOR
SPOOL ADJUSTMENT CONSTANT
HORSEPOWER
CURVE
EXTERNAL SPRING
TUBING CAVITY
FLOW
GAUGE PORT
WITH ORIFICE
*F1
COMPENSATOR
DIRECT BODY PRESSURE
ACTING
RELIEF
SERVO PISTON
SWASH
PLATE
CAM–PISTON OUTLET
PORT
HORSEPOWER
CONTROL
BLOCK
INLET
PORT
Product Information
Parker Hannifin’s North American
customers seeking product infor-
The Filtration Group is a leading
mation, the location of a nearby worldwide manufacturer and marketer
distributor, or repair services will of quality filtration and clarification
receive prompt attention by calling products. Its goal is to provide
the Parker Product Information customers with the best value, top
Center at our toll-free number: quality, sound technical support, and
1-800-C-PARKER (1-800-272-7537). global availability.
In the UK, a similar service is avail-
able by calling : 0500-103-203.
The Aerospace Group is a leader in the
development, design, manufacture and
servicing of hydraulic and fuel control
systems and components for aerospace
and related high-technology markets. It
serves both commercial and military
aviation customers around the world.
Parker Hannifin Corporation Catalog 2600-600-2/USA, 5M
Hydraulic Pump/Motor Division 6/97 IGS Printed in U.S.A.
100 Parker Drive
Otsego, Michigan 49078
Hydraulics Tel: (616) 694-9411
Fax: (616) 694-4638
Web site: http://www.parker.com