You are on page 1of 1

Hardware DLL Installation Procedure

1. Install the hardware DLL using the provided self-extracting executable file. The installation will not prompt the user
for a folder or any installation settings. Once the “setup.exe” is initiated, the installation will proceed and install the
files with minimal user interaction. During the installation, it is imperative that none of the Olympus instruments be
plugged into the PC.

2. Wait for the installation to complete. Once completed, the files will be located in the following location:

a. Windows XP

C:\Program Files\Olympus NDT\Olympus Ultrasonic Measurement Device Driver Library

b. Windows 7

C:\Program Files (x86)\Olympus NDT\Olympus Ultrasonic Measurement Device Driver Library

3. With the installation, there is a document named “usageManual.doc” which is located in the directory listed in item
#2. This document describes how to use the DLL in order to communicate with the Olympus instruments.

4. When developing and running your application, the files located in the directory listed in item #2 must be copied to
the same folder as the executable file. This is necessary in order to communicate with the instruments.

You might also like