Professional Documents
Culture Documents
Imagination at work.
PGT25 Power Turbine
PGT25 Power Turbine
Overview
Mainly consists:
PT Stator
PT Rotor
Bearing Housing
Operative Speed:
3250 ÷ 6825 rpm
6500 nominal
Support Legs
Gib - key
Stage 8
bleed air
The 1st stage turbine casing contains the 1st stage shrouds which prevent the casing shell from
coming in contact with the hot gases and bear the honey-comb seals which form a seal
barrier, against hot gases escaping, with the 1st stage turbine bucket tip teeth. The 1st stage
shrouds support also the 1st stage nozzles support ring on the front side and the 2nd stage
nozzles on the rear side.
The 2nd stage turbine casing contains the 2nd stage shrouds which prevent the casing
shell from coming in contact with the hot gases and bear the honey-comb seals which
form a seal barrier, against hot gases escaping, with the 2nd stage bucket tip teeth .
The 2nd stage shrouds support also the 2nd stage nozzles.
The twist locks are rotated 180° and punched to lock the buckets in place
Journal bearing
Oil ejector
Sealing air for bearing comes from CDP air, pass through an injector mounted
inside the turbine enclosure that is mixed with ambient air