There are various types of electric machines such as AC and DC.
AC is alternating current that can define as the flow of charge that changes direction periodically. The result obtained will be the voltage level also reverse along with the current. Basically AC is used to deliver power to industries, houses and office buildings. AC is produced by using called an alternator. In a DC circuit, electrons emerged from the minus or negative pole and move towards the plus or source of direct current is produced by batteries, electrochemical, and photovoltaic cells. But AC is most preferred across the world. In this scenario AC can be converted to DC. This will in multiple steps. Initially, power supply consists of transformer, which later converted into DC with the helpof a rectifier. It prevents the flow of current from reversing and a filter is used to eliminate current pulsations in the output of the rectifier. This is the phenomenon of how AC is converted into DC. In this experiment, we have to proceed the experiment in Geotech’s laboratory. This experiment was to identify different types of electric machines and relevant electric machines and propose suitable electric machines for the needs. The problem that we have to faced in this experiment is when we have to collect the information about the machine because we do not know about the electrical machine in the lab. So that we do some searching about the machine in some website. We also ask some workers that take in charge in that lab about the machine. From the interview we found that the machine can function as well so that the machine can generate much enough for the requirement. CONCLUSION
The objective in this experiment have been successfully achieved which
is student would able to identify different types of electric machines and analyse relevant electric machines and propose suitable electric machines for the needs . This experiment has given us a lot of new knowledge about power supply machines. We also know more about electric machines that being used during the generation or transmission of electricity to a building. We also have checked whether the electric machines currently being used for the power supply is suitable and sufficient.