Professional Documents
Culture Documents
Student Workbook
Trademarks
Intergraph, the Intergraph logo, SmartSketch, FrameWorks, SmartPlant, INtools, MARIAN, and PDS are
registered trademarks of Intergraph Corporation. Microsoft and Windows are registered trademarks of Microsoft
Corporation. MicroStation is a registered trademark of Bentley Systems, Inc. ISOGEN is a registered trademark of
Alias Limited. Other brands and product names are trademarks of their respective owners.
Preface
Preface
This document is designed as an aid for students attending the SmartPlant 3D Reference Data
class presented by Intergraph Corporation, and it’s a supplement to the standard product
documentation.
Objective
Course description
Objective
After completing this lab, you will be able to:
Note : This lab is intended as a basic introduction to spec creation. As such it is limited to
straight pipe and few fittings (Example: 90 and 45 degree elbows, tees, etc). It is not intended
as an example of a functional design spec.
2. Select the following worksheets while holding down the control key:
a. PipingMaterialsClassData
b. PipingCommodityFilter
c. BendAngles
d. PipeNominalDiameters
e. StandardNotesData
3. Save the worksheets to a new Excel Workbook named “CC150-1.xls” in your own working
directory.
2. Add the following data in the columns noted for the new piping specification.
a. SpecName : CC150-1
d. FluidService : Process
h. RevisionNumber : A
i. PipingNote1: 203
2. Add records for preferred bend angles for the new specification as shown below:
2. Add records for pipes, bends, size changes and tee as shown below:
PipeBend (default) 0.75”- 1.5” S-XS PAAZZBPZZABAABSAAZZUS Pipe, plain ends, ASTM-A106-B, [401] Bend
Radius 3 D
45 Deg Elbow (Default) 2”-24” S-STD MBXZZBOZZAAEADCZZUS 45 deg LR elbow, [403], BE, ASTM-A234-WPB,
ASME-B16.9
45 Deg Trimmable Elbow 2”-24” S-STD MBXZZBOZZAAEADCZZUS 45 deg LR elbow, [403], BE, ASTM-A234-WPB,
(Default) ASME-B16.9
90 Deg Elbow (Default) 2”-24” S-STD MCMZZBOZZAAEADCZZUS 90 deg LR elbow, [403], BE, ASTM-A234-WPB,
ASME-B16.9
90 Deg Trimmable Elbow 2”-24” S-STD MCMZZBOZZAAEADCZZUS 90 deg LR elbow, [403], BE, ASTM-A234-WPB,
(Default) ASME-B16.9
Concentric Size Change 4”-24” S-STD MBCZZBOZZAAEADCZZUS Concentric reducer, [414], BE, ASTM-A234-WPB,
ASME-B16.9
Eccentric Size Change 4”-24” S-STD MBJZZBOZZAAEADCZZUS Eccentric reducer, [414], BE, ASTM-A234-WPB,
ASME-B16.9
Tee 2”-24” S-STD Tee01 Tee, [403], BE, ASTM-A234-WPB, ASME-B16.9
4. Select Start => Programs => Intergraph SmartPlant3D => Database Tools => Bulkload
Reference Data.
6. Select the “Add” option under “Excel Files” and select CC150-1.xls
7. Under Bulkload Mode options, select the A/M/D bulkload mode and uncheck “Update Object
Type Hierarchy and Catalog Views” option.
Note: “Update Object Type Hierarchy and Catalog Views” option is provided that will allow
the catalog administrator to choose when the Business Object Classification Hierarchy (BOC)
and catalog views are updated.
8. Select an existing piping catalog. Find your catalog server name and database/schema names
from the pull down menus. Obtain these names from the instructor.
Note : If the file is loaded into a new catalog, then additional data files will be required and the
spec will be unusable until the required files are loaded into the database – this lab assumes
that a functional catalog with existing specs and rules exists.
10. Point the Symbol path to the symbols share for this class.
12. Review the log file once the Bulkload process is complete.