Professional Documents
Culture Documents
• Sea water desalination • PCB manufacture • Chemical plant manufacturing • Ore extraction
• Wastewater treatment • Solar cell manufacturing • Acid production • Copper electrolysis
• Exhaust air scrubbers • Electroplating • Fertilizer production • Acid regeneration
• Biogas treatment • Glass finishing • Chlor-alkali electrolysis • Nickel electrolysis
• Ultra-pure water • Coating lines ... • Steel pickling
• Process water ... ...
• Manufacturing of bio fuels
...
Pumps 2 3 Pumps
Product range
Pumps
ASV Stübbe produces pumps for the safe
transport of aggressive and corrosive
Pumps
liquids of up to 400m³/h. Our range includes
horizontal as well as vertical pumps from
highly corrosion and wear resistant materials.
Centrifugal pumps 6
Centrifugal pump NM 8
Centrifugal pump NMB 9
Sump pumps 16
Sump pump ET 18
Sump pump ETL 20
Sump pump ETLB 22
Instrumentation
Pump guards 24
Our systems for filling level, pressure and
flow control are of robust design and suitable
Motor and design 26
for fast end efficient systems integration. We
manufacture corrosion resistant instrumenta-
tion technology for tank and plant builders.
Pumps 4 5 Pumps
Centrifugal pumps
Horizontal pumps
Sliding bearings
Pumps 6 7 Pumps
Centrifugal Centrifugal
pump NM pump NMB
Standard chemical pumps from Series NM The compact NMB block pumps are based on the
meet the installation dimension specifica- hydraulics from the NM series. In this version,
tions according to DN 24256 ans ISO 2558. however, the motor is directly flanged to the
The robust hydraulic parts is made of high- housing and has no further bearing or coupling
grade plastic reinforced by an additional elements. The economic design principle covers the
metal frames. Pumps from the NM series are performance range from 1.1 - 7.5 kW. Just like the
avaialable as hydraulic with coupling or as NM series the hydraulic part can be equipped with
complete units including standard motor and a variety of sliding bearing combinations, quench
base plate. Because of the wide performance systems or buffer fluid connections.
spectrum of the NM range these pumps can
be found in virtually all areas where aggressive Hmax 59 m
or corrosive liquids are being handled. Qmax 110 m³/h
Hmax 98 m
Qmax 530 m³/h
Pumps 8 9 Pumps
Centrifugal
pump SHB
- double acting - 11 kW
Hmax 40 m
Qmax 125 m³/h
Pumps 10 11 Pumps
Magnetic coupled
centrifugal pump
SHM
Body Bearing Motor
Hmax 43 m
Qmax 78 m³/h
Pumps 12 13 Pumps
Eccentric pump L/F
PVC-U PVC-U
- PP - EPDM ...
Material PE PP PVDF PE PP PVDF
hmax [m] 25 25
ASV-Eccentric pumps
Eccentric pumps are displacement pumps. Eccentric pumps are dry-run capable, self-
The fluid is pumped by an eccenter moving priming displacement pumps. They are
the fluid between a thick rubber liner and the specifically suitable for frequency regulation
pump housing. Eccentric pumps are dry run or mobile applications. By design they require
capable, free of cavitation and self-priming. only little maintenance and are available in
Based on their special design with high-grade two different versions.
rubber liners and robust plastic housings they Type F pumps are flanged directly to the motor,
are multi-purpose pumps even for difficult, whereas type L pumps have a coupling and
aggressive fluids with high viscosities or come on a base plate. Both types come with
particle contents. hose nozzels for a flexible conneciton to the
pipeline systems.
Typ F Typ L
Pumps 14 15 Pumps
Sump pumps
Pressure connection DN 15 - DN 80 DN 20 - DN 80 DN 15 - DN 80
PP PP PP
hmax [m] 56 65 42
ETLB
dry
Qmax [m3/h] 120 240 100
installation
ET ETL ETLB
Sump pumps are intended for use in open or Every pump is being tested acc. to DIN 1944 requirements. Suction tube extentions up to
not pressurised containers or in pump sumps. and can be supplies with an certificate acc. to 2000 mm allow the complete evacuation of
Because of their special way of installation DIN 50049. tanks. Suction straines safeguard the trouble-
the unlike horizontal pumps do not require free operation even in case of bigger objects • Fluid-wetted shaft bearing • Powerful external bearing outside the tank • Design with long motor shafts without
mechanical shaft seals. In the presence of Customised solitions and accessories in the fluids. • Submersion depth up to 2.000 mm • For Motors up to 45 kW bearings
aggressive gases in the tanks an external Sump pumps often have to match specific In case of a lack of space inside the container • Dry-run capable bearing combinations available • Submersion depth up to 750 mm • Submersion depth up to 750 mm
seal is being achieved by the use of labyrint installation situations. Mounting plates, fixing the ETLB series can also be dry mounted. In • Dry-run safe • Dry-run safe
seal systems. Such are available in various holes and pressure port connections therefore this case the pump is mounted on the outside
materials up to titanium options. can be customised according to individual of the tank.
Pumps 16 17 Pumps
Sump pump
ET Motor
- 0,25 kW
...
- 22 kW
Hmax 56 m
Qmax 120 m³/h
Bearing
- SiCi / PTFE-Carbon
- SiCi / SiCi
- SiCg / SiCg
- HD Carbon / SiCi
Pumps 18 19 Pumps
Sump pump
ETL
Motor
- 0,18 kW
...
- 45 kW
Hmax 65 m
Qmax 240 m³/h - max 750 mm - PVDF
- Suction tube
max 1.500 mm
Pumps 20 21 Pumps
Sump pump
ETLB
Motor
- 0,18 kW
...
- 7,5 kW
- Suction tube
max 1.500 mm
Pumps 22 23 Pumps
Pump guards
Pumps 24 25 Pumps
Motor and design
[m]
An intelligent usage of electrical drives Optimum efficiency 44
43
Förderhöhe
42
offers an enormous potential for energy Reduced energy cost and overall cost evalua- 41
40
savings. According to latest international tions - perfect results can only be achieved by 39
38
37
surveys about 10%of the available electricity a precise matching of the operational features 36
35
worldwide is being consumed by pumps. To of the pump and the pipework. 34
33
32
realize this potential for energy efficiency the 31
55%
Wirk.
30
European Commission has as part of the EUP Further to the utilization for energy efficient 29
28
27
guide line passed the following legislation motors ASV Stübbe puts a focus on the opti- 26 53,8%
25
towards energy efficient AC standardmotors mization of the mechanical part of the pump 24
23
52,3%
23 m
1
22
and electrical drives: in order to achieve best possible efficiency 21
50,3%
20
• As of June 2011 inside the EU only AC ratings. 19
18
Ø 172
17
standard motors with a size of 0.75 to 16
15
375 kW meeting the IE2 regulations may IT based optimization tools allow the modifi- 14
13
46,4%
Ø 150
12 Ø 155,8
Ø 160
be put into circulation. cation of the impellers to reach the best ope- 11
10
• As of 2015 all standard motors bigger than rational features of the pump. Further to that 9
8
Ø 130
7
7.5 kW have to meet the specifications of all pumps are put to a 100% test to verify the 6
5
the IE3 standard or must be further to the practical performance of the design features. 4
3
2
IE2 standard requirements be equipped And of course all ASV-motors can be equipped 1
0
[m]
with rev regulators. with rev regulators. 6
NPSH-Werte
Ø 172
5,5
• As of 2017 the IE3 regulation also applies 5
4,5
Ø 130
Ø 155,8
to 0.75 to 7,5 kW electric motors. Integrated modular systems and a high verti- 4
3,5 3,69 m
3
cal integration allow short lead times and the 2,5
2
All listed pumps are fitted with motors best possible availability. 1,5
1
0,5
according to IE 2 standard. [%]
0
Wirkungsgrad
55
50 51,5 %
45
40
35
30 Ø 130
25
20
15
10
5
0
[kW] Wellenleistung P2
Ø 172 (P2)
5,5
5
4,5 Ø 155,8 (P2)
4
3,5 3,62 kW
3
2,5
Ø 130 (P2) Hydraulic pump design with operational
2
1,5 performance, NPSH-value, efficiency
1
0,5
0
30 m³/h and shaft power rating
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 [m³/h]
Pumps 26 27 Pumps
Subsidiaries and Partners
EUROPE: CHINA:
Headquarter: ASV Stübbe España S.L. Beijing Branch ASV Stuebbe Pumps & Valves
Rambla Josep Ma Jujol Avic Building, No.10B, Central Road, East 3rd (ShenZhen) Co., LTD
ASV Stübbe GmbH & Co. KG 33-35 locales E1-F1 Ring Road, ChaoYang District, Beijing China Building H Dakenglong Industrial Park,
Hollwieser Str. 5 E-08970 Sant Joan Despí 100022, 2405A No. 222 Buxin Road, Guanlan subdistrict,
D-32602 Vlotho, Germany Barcelona Tel: +86 (10) 65673748 Bao’an District, ShenZhen 518110
Tel. +49(0)5733 799-0 Tel: +34 (0) 93 477 46 10 Fax: +86 (10) 65673780 Tel: +86 (0) 755-88 83 19 87
Fax +49(0)5733 799-5000 Fax: +34 (0) 93 477 46 11 asv-stuebbe@asv-stuebbe.cn Fax: +86 (0) 755-29 83 20 80
contact@asv-stuebbe.de yserrano@asv-stuebbe-spain.com asv-stuebbe@asv-stuebbe.cn
www.asv-stuebbe.de Shanghai Branch
ASV Stübbe France SARL Unit 1,No.1078 Huajiang Road, Jiangding ASV Stuebbe Pumps & Valves
Immeuble « Le Cérès » District, (Suzhou) Co., LTD
21-23 rue du Petit Albi Shanghai China 201804, No. 16 Nanguandu Road, Yuexi, Wuzhong
BP 48453 Tel: +86 (0)21-63261281 District, Suzhou, Jiangsu China 215104
95807 Cergy Pontoise Cedex Fax: +86 (0)21-63261282 Tel: +86 (0)512-66566846
Tel: +33 (0) 1 30 75 10 45 asv-stuebbe@asv-stuebbe.cn Fax: +86 (0)512-66566932
Fax: +33 (0) 1 30 75 10 46 contact@asv-suzhou.com
michel.janas@asv-stubbe.fr Chengdu Branch
Rm. 2408, Building A, Government Plaza
ASV Stuebbe Ukraine TOV No. 216, Lower Dongdajie Street
Baseina Str., 5b, of. 30 Chengdu, Sichuan province, China 610015
01001 Kyiv Tel: +86 (0)28-86672976/ 86653723
Tel: +38 044 303 93 64 Fax: +86 (0)28-86672387
Fax: +38 044 234 38 00 asv-stuebbe@asv-stuebbe.cn
asv_ukraine@ukr.net
Distribution partners:
Czech Republic
Denmark
Finland
Great Britain
Italy
Netherlands
Norway
Poland
Russia
Sweden
Australia
Canada
Chile
production site South Africa
Pumps 28 29 Pumps
sales location Uzbekistan
Quality Management
and Service
Service to us means 360° support for our Quality, perfection and reliability are the
customers. From the selection of the proper guiding principles of our company. After all,
materials through to after sales service - use our products are used for the safe handling
our expertise and experience to minimise of water polluting and hazardous substances
your cost and effort and maximise your and have to reliably resist the most aggressive
market impact. media.
Quality management
In-process inspections and quality control Materials and products are permanently system certified according
of components guarantee high quality final inspected in demanding quality tests in to DIN EN ISO 9001:2008
products. our own company laboratory.
Pumps 30 31 Pumps
ASV Stübbe GmbH & Co. KG
Hollwieser Str. 5
D-32602 Vlotho, Germany
Tel.+49(0)5733 799-0
Fax +49(0)5733 799-5000
contact@asv-stuebbe.de
www.asv-stuebbe.de
340200-2012-03-01