Professional Documents
Culture Documents
HOME » PRODUCT FINDER » STOCK® HPG FEEDER - HIGH PRESSURE GRAVIMETRIC FEEDER
The HPG series is designed for pulverized coal fired boilers that
require feeders to withstand explosion pressures as high as 50 PSI Inquiry / Contact
(3.5 bar) in accordance with NFPA 85, and provide maximum safety
and accurate coal feeding. This feeder has a typical conveying
Newsletter registration
length of 7’ (2134mm) and can be designed as a drop in
replacement. Stock® HPG feeders maintain accuracy within ± ¼ of
1 percent of the total coal flow.
The HPG offers reliable coal flow to the pulverizer under a wide
range of coal conditions. The known coal mass flow rate will allow
more accurate control of excess air. This will minimize NOx
formation in stack gases. Less stratification of excess air between
burners and better pressure and heat control result from the equal
delivery of coal to each pulverizer in direct relation to the firing rate
demand. Optimum air/fuel ratios are achieved when changing
loads. Coal and air are kept in proportion by the boiler control
system and can be controlled. Coal leaving the pulverizer can be
maintained relatively constant, ensuring proper distribution at the
burner.
Standard inlet widths are 24” (610mm) and 36” (914mm). Inlet
shapes can be round or rectangular with length to width ratios up
to 3:1. Feed rates up to 100 tons per hour are standard with higher
capacities available.
Summary of Benefits
https://www.schenckprocess.com/in/products/weighfeeder-multidos-hpg#&gid=1&pid=4 1/3
1/3/2019 Stock® HPG feeder - High Pressure Gravimetric Feeder
Data sheets
MULTIDOS® HPG
Modular Feeder
Specials / Studies
Etc
https://www.schenckprocess.com/in/products/weighfeeder-multidos-hpg#&gid=1&pid=4 2/3
1/3/2019 Stock® HPG feeder - High Pressure Gravimetric Feeder
Brochures
Flow sheets
FlowSheet Power
https://www.schenckprocess.com/in/products/weighfeeder-multidos-hpg#&gid=1&pid=4 3/3