Professional Documents
Culture Documents
23
Link AB, of width b = 2 in. and thickness t = 14 in., is used to support the end of a
A
horizontal beam. Knowing that the average normal stress in the link is 20 ksi and
that the average shearing stress in each of the two pins is 12 ksi, determine (a) the
d diameter d of the pins, (b) the average bearing stress in the link.
b t
B
d
SOLUTION
Rod AB is in compression.
1
A bt where b 2 in. and t in.
4
1
P A ( 20)(2) 10 kips
4
P
Pin: P
AP
and AP d2
4
4 AP 4P (4)(10)
(a) d 1.03006 in.
P (12)
d 1.030 in.
P 10
(b) b 38.833 ksi
dt (1.03006)(0.25)
b 38.8 ksi
PROPRIETARY MATERIAL. Copyright © 2015 McGraw-Hill Education. This is proprietary material solely for authorized instructor use.
Not authorized for sale or distribution in any manner. This document may not be copied, scanned, duplicated, forwarded, distributed, or posted
on a website, in whole or part.
25
P PROBLEM 1.31
5.0 in.
3.0 in. The 1.4-kip load P is supported by two wooden members of uniform cross section
that are joined by the simple glued scarf splice shown. Determine the normal and
shearing stresses in the glued splice.
608
P'
SOLUTION
P 1400 lb 90 60 30
2
A0 (5.0)(3.0) 15 in
P cos 2 (1400)(cos30 )2
70.0 psi
A0 15
P sin 2 (1400)sin 60
40.4 psi
2 A0 (2)(15)
PROPRIETARY MATERIAL. Copyright © 2015 McGraw-Hill Education. This is proprietary material solely for authorized instructor use.
Not authorized for sale or distribution in any manner. This document may not be copied, scanned, duplicated, forwarded, distributed, or posted
on a website, in whole or part.
35
A
PROBLEM 1.42
600 lb/ft
35! Link AB is to be made of a steel for which the ultimate normal stress is
E
B C D 65 ksi. Determine the cross-sectional area of AB for which the factor
of safety will be 3.20. Assume that the link will be adequately
5 kips reinforced around the pins at A and B.
1.4 ft 1.4 ft 1.4 ft
SOLUTION
PROPRIETARY MATERIAL. Copyright © 2015 McGraw-Hill Education. This is proprietary material solely for authorized instructor use.
Not authorized for sale or distribution in any manner. This document may not be copied, scanned, duplicated, forwarded, distributed, or posted
on a website, in whole or part.
48
PROBLEM 1.47
1
2 P
c
b
40 mm
SOLUTION
PU 2A U 2 d2 U
4
(2)(0.012) 2 (145 106 ) 32.80 103 N
4
Based on tension in wood,
PU A U w (b d) U
PROPRIETARY MATERIAL. Copyright © 2015 McGraw-Hill Education. This is proprietary material solely for authorized instructor use.
Not authorized for sale or distribution in any manner. This document may not be copied, scanned, duplicated, forwarded, distributed, or posted
on a website, in whole or part.
53