Professional Documents
Culture Documents
Notes:
4) Add a SPST switch & connect the brown wire, so that when the brown wire is grounded the
VPU-12 will be in the clear mode. Program the VPU-12 for latched with a -/+ polarity.
Code 16 is selected if wires (P1-8, 10, 11, 12) are NOT connected.
Code 1 is selected if wires (P1-8, 10, 11, 12) are grounded.
This application note was derived using the best information available to us at the time of publication. Midian assumes no responsibility
for the accuracy of this document or any damage to equipment resulting from use of this application note.
Midian Electronics, Inc 2030 N. Forbes Blvd. #101 Tucson, AZ 85745 USA
Orders: 1-800-MIDIANS (643-4267) Phone: 520-884-7981 Fax: 520-884-0422
E-mail: support@midians.com Website: www.midians.com