You are on page 1of 126

STEREO DVD TUNER DECK

EV51DVD

SOUND MODE TIMER/CLOCK ADJ

KARAOKE DISPLAY

ST. MEMORY ENTER

DVD/CD TAPE
4/1 – VOLUME + ¡/¢

TUNING – PLAY/PAUSE STOP TUNING +


TUNER LINE

OPEN/CLOSE

DOLBY NR(DEMO) REVERSE MODE

ASES REC/STOP

MIC VOL

ORDER NO.
MIN MAX

MIC
(MAIN)

MIC
(SUB)

RRV2636
XV-EV51

STEREO DVD TUNER DECK

XV-EV51
XV-EV21
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Regienal restriction
Model Type Power Requirement Remarks
codes (Region No.)

XV-EV51 ZLXJ/NC DC Power supplied from other system component 4


XV-EV21 ZLXJ/NC DC Power supplied from other system component 4

This product does not function properly independently; to avoid malfunctions, be sure
to connect it to the prescribed system component(s), otherwise damage may result.
Component System System Service manual

MINI SYSTEM EVA-5CH EVA-2CH

Stereo DVD Tuner Deck XV-EV51 XV-EV21 RRV2636(This manual)

Stereo Power Amplifier M-EV51 M-EV21 RRV2663(EV51), RRV2664(EV21)

Speaker System S-EV51V S-EV21V RRV2640(EV51), RRV2641(EV21)

For details, refer to "Important symbols for good services" .

PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan


PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2002
T-ZZR AUG. 2002 printed in Japan
1 2 3 4

SAFETY INFORMATION
A

This service manual is intended for qualified service technicians ; it is not meant for the casual do-
it-yourselfer. Qualified technicians have the necessary test equipment and tools, and have been
trained to properly and safely repair complex products such as those covered by this
manual.Improperly performed repairs can adversely affect the safety and reliability of the product
and may void the warranty. If you are not qualified to perform the repair of this product properly and
safely, you should not risk trying to do so and refer the repair to a qualified service technician.

WARNING !
B
THE AEL (ACCESSIBLE EMISSION LEVEL) OF THE LASER POWER OUTPUT IS LESS THAN CLASS 1
BUT THE LASER COMPONENT IS CAPABLE OF EMITTING RADIATION EXCEEDING THE LIMIT FOR
CLASS 1.
A SPECIALLY INSTRUCTED PERSON SHOULD DO SERVICING OPERATION OF THE APPARATUS.

LASER DIODE CHARACTERISTICS


FOR DVD : MAXIMUM OUTPUT POWER : 5 mW
WAVELENGTH : 650 nm
FOR CD : MAXIMUM OUTPUT POWER : 5 mW
WAVELENGTH : 780 nm

LABEL CHECK

Additional Laser Caution

1. Laser Interlock Mechanism


• Loading switch (S101 on the LOAB Assy) is used for interlock
mechanism of the laser.
When this switch turned ON in SW2 (XCLOSE) side (OPEN signal is
(Printed on the Rear Panel A)
0V and XCLOSE signal is 3.5V), a laser becomes the status which
can completely oscillation.
Furthermore, the laser completely oscillates in the disc judgment and
disc playback.
When player is power ON state and laser diode is not completely
E oscillating, 780nm laser diode is always oscillating by half power.
• Laser diode is driving with Q101 (650nm LD) and Q102 (780nm LD)
XV-EV51/ZLXJ/NC on the DVDM Assy.
Therefore, when short-circuit between the emitter and collector of
these transistors or the base voltage is supplied for transistors turn
on, the laser oscillates. (failure mode)
• In the test mode ∗ , there is the mode that the laser oscillates except
for the disc judgment and playback. LD ON mode in the test mode
oscillates with the laser forcibly.
The interlock mechanism mentioned above becomes invalid in this
mode.

2. When the cover is open, close viewing through the objective lens with
the naked eye will cause exposure to the laser beam.

F ∗ : See page 80.

2 XV-EV51
1 2 3 4
5 6 7 8

[ Important symbols for good services ]


In this manual, the symbols shown-below indicate that adjustments, settings or cleaning should be made securely. A
When you find the procedures bearing any of the symbols, be sure to fulfill them:
1. Product safety
You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and
should keep the safety during servicing by following the safety instructions described in this manual.

2. Adjustments
To keep the original performances of the product, optimum adjustments or specification confirmation is indispensable.
In accordance with the procedures or instructions described in this manual, adjustments should be performed.

3. Cleaning
B
For optical pickups, tape-deck heads, lenses and mirrors used in projection monitors, and other parts requiring cleaning,
proper cleaning should be performed to restore their performances.

4. Shipping mode and shipping screws


To protect the product from damages or failures that may be caused during transit, the shipping mode should be set or
the shipping screws should be installed before shipping out in accordance with this manual, if necessary.

5. Lubricants, glues, and replacement parts


Appropriately applying grease or glue can maintain the product performances. But improper lubrication or applying
glue may lead to failures or troubles in the product. By following the instructions in this manual, be sure to apply the
prescribed grease or glue to proper portions by the appropriate amount.For replacement parts or tools, the prescribed
ones should be used. C

Discs compatible with this


player
Any disc that displays one of the following
logos should play in this player. Other D
formats, including DVD-Audio, DVD-RAM,
DVD-ROM, CD-ROM (except those that
contain MP3 files), SACD and Photo CD will
not play.

DVD-Video

Audio-CD Video-CD CD-R * CD-RW *

E
* : Video Mode Only

XV-EV51 3
5 6 7 8
1 2 3 4

CONTENTS
SAFETY INFORMATION ..................................................................................................................................... 2
1. SPECIFICATIONS ............................................................................................................................................ 5
A 2. EXPLODED VIEWS AND PARTS LIST ............................................................................................................ 6
2.1 PACKING ................................................................................................................................................... 6
2.2 EXTERIOR SECTION................................................................................................................................ 8
2.3 FRONT PANEL SECTION ....................................................................................................................... 10
2.4 LOADING MECHANISM ASSY ............................................................................................................... 12
2.5 TRAVERSE MECHANISM ASSY............................................................................................................. 14
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM .......................................................................................... 16
3.1 BLOCK DIAGRAM ................................................................................................................................... 16
3.2 OVERALL WIRING DIAGAM ................................................................................................................... 20
3.3 FM/AM TUNER MODULE ........................................................................................................................ 24
3.4 IF ASSY ................................................................................................................................................... 26
3.5 AF ASSY(1/2) .......................................................................................................................................... 28
B
3.6 AF ASSY(2/2) .......................................................................................................................................... 30
3.7 DECK ASSY ............................................................................................................................................ 32
3.8 DVDM ASSY(1/2)..................................................................................................................................... 34
3.9 DVDM ASSY(2/2)..................................................................................................................................... 36
3.10 DVD IF ASSY ......................................................................................................................................... 38
3.11 DISP1, DISP2, DISP3 and LED ASSYS ................................................................................................ 40
3.12 DSP ASSY ............................................................................................................................................. 42
3.13 MIC ASSY .............................................................................................................................................. 44
4. PCB CONNECTION DIAGRAM ..................................................................................................................... 46
4.1 LOAB ASSY ............................................................................................................................................. 46
4.2 FM/AM TUNER MODULE ........................................................................................................................ 47
C 4.3 DVDM ASSY ............................................................................................................................................ 48
4.4 DVD IF ASSY ........................................................................................................................................... 52
4.5 IF ASSY ................................................................................................................................................... 54
4.6 AF ASSY .................................................................................................................................................. 56
4.7 DECK ASSY ............................................................................................................................................ 58
4.8 DISP1, DISP2, DISP3 and LED ASSYS .................................................................................................. 60
4.9 MIC ASSY ................................................................................................................................................ 62
4.10 DSP ASSY(XV-EV51 Only).................................................................................................................... 63
5. PCB PARTS LIST ........................................................................................................................................... 64
6. ADJUSTMENT ............................................................................................................................................... 72
6.1 DECK SECTION ...................................................................................................................................... 72
6.1.1 Adjustment condition ......................................................................................................................... 72
D 6.1.2 Playback and Recording section ....................................................................................................... 73
6.2 TUNER SECTION .................................................................................................................................... 75
6.3 DVD SECTION ADJUSTMENT ITEMS ana LOCATION.......................................................................... 76
6.4 JIGS and MEASURING INSTRUMENTS ................................................................................................ 76
6.5 NECESSARY ADJUSTMENT POINTS ................................................................................................... 77
6.6 TEST MODE ............................................................................................................................................ 78
6.7 MECHANISM ADJUSTMENT .................................................................................................................. 79
7. GENERAL INFORMATION ............................................................................................................................. 82
7.1 DIAGNOSIS ............................................................................................................................................. 82
7.2 PARTS.................................................................................................................................................... 101
7.3 CLEANING............................................................................................................................................. 120
8. PANEL FACILITIES ...................................................................................................................................... 121
E

4 XV-EV51
1 2 3 4
5 6 7 8

1. SPECIFICATIONS
A
Specifications
Amplifier Section Miscellaneous
X-EV51DVD model Power Requirements
Continuous Power Output: Multi voltage model ....... AC 110-127/ 220-230/
Front ................................... 80 W per channel 240V(switchable), 50/60 Hz
(1kHz, 10 %, 8 Ω) Power Consumption
Center...................... 33 W (1kHz, 10 %, 8 Ω)
Surround............................. 33 W per channel X-EV51DVD model
Singapore, Malaysia, Hong Kong models.......175 W
(1kHz, 10 %, 8 Ω)
All other model .................................... 465 W
X-EV21DVD model
X-EV21DVD model
Continuous Power (RMS) ............. 80 W + 80 W B
Singapore, Malaysia models .................. 150 W
(1 kHz, THD 10%, 8 Ω)
All other model .................................... 540 W
Disc section Power Consumption in standby mode .............1 W
Digital audio
Dimensions:
characteristics ................ DVD fs: 96 kHz, 24-bit
DVD Tuner Deck .................. 170 (W) x292.5(H)
Type ........... DVD system, Video CD system and
x 260 (D) mm
Compact Disc digital audio system
Power Amplifier ....................... 170 (W) x 190 (H)
Frequency response ................... 4 Hz to 44 kHz
x 254 (D) mm
S/N ratio .................................................... 95 dB
Dynamic range ......................................... 95 dB Weight:
Total harmonic distortion ..................... 0.005 % DVD Tuner Deck
Wow and Flutter..................Limit of measurement XV-EV51 ................................................ 3.6 kg
(± 0.001 % W.PEAK) or less (EIAJ) XV-EV21 ................................................ 3.5 kg
Power Amplifier
Cassette deck section C
M-EV51 .................................................. 5.3 kg
Systems.........................4 track, 2-channel stereo M-EV21 .................................................. 4.8 kg
Heads.......................Recording/playback head x 1
Erasing head x 1
Motor ................................... DC servo motor x 1 Accessories (Stereo DVD Tuner Deck)
Tape types ...............................TYPE I (Normal) Operating instructions..........................................2

FM tuner section Accessories (Stereo Power Amplifier)


Frequency Range........................87.5 - 108MHz Remote control ....................................................1
Antenna ..................................75 Ω, unbalanced Power cord
Australian, New Zealand, Central
AM tuner section
and South American models........................... 2
FrequencyRange
All other models ............................................. 1
With 9 kHz step .......... 531 kHz to 1,602 kHz
Power plug adapter (excluding Singapore,
With 10 kHz step ........ 530 kHz to 1,700 kHz D
Hong Kong and Malaysian models)..................... 1
Antenna ........................................ Loop antenna
Video cord............................................................ 1
System cable (EV51DVD) ................................... 2
Manufactured under license from Dolby System cable (EV21DVD) ................................... 1
Laboratories. “Dolby”, “Pro Logic”, and the FM antenna.......................................................... 1
double-D symbol are trademarks of Dolby AM loop antenna.................................................. 1
Laboratories. Dry cell batteries (AA/R6) ................................... 2

"DTS" and "DTS Digital Surround" are registered


trademarks of Digital Theater Systems, Inc. • Specifications and design subject to
Manufactured under license from Digital Theater possible modification without notice,
Systems, Inc. due to improvements.
E
Accessories
MONO SYSTEM DISP
DVD DISP

TOP MENU

DVD MENU

FOLDER +
RETURN
AUDIO SUBTITLE ANGLE ZOOM
LINE

INPUT CHANNEL VOLUME


MUTE

ENTER
CLEAR
E/

0
ST +

TV CONTROL
CLOCK ADJ.
FM/AM

PROGRAM REPEAT RANDOM


TIMER

VOLUME

TEST TONE CH LEVEL SLEEP


7

6
9
TUNE +

TUNE –
ENTER

33
3
SURROUND ADVANCED

SELECT
KARAOKE ECHO
TAPE

I — KEYCON — i
STANDBY/ON

5
8
8
DSP

SYSTEM SETUP

ST –

Video Cord
DVD/CD

FOLDER –
DVD SETUP

SHIFT
/e
SOUND

4
7
4
1
MODE

AC Power Cord (VDE1034)


(XDG3001) Remote control unit
(XXD3049)

AM loop antenna
System Cable ×1
(ATB7009) FM wire antenna (XDE3053) AA size IEC R6P
(ADH7004) Dry cell batteries (x2) F

XV-EV51 5
5 6 7 8
1 2 3 4

2. EXPLODED VIEWS AND PARTS LIST


NOTES: Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
A The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
Screws adjacent to mark on product are used for disassembly.
For the applying amount of lubricants or glue, follow the instructions in this manual.
(In the case of no amount instructions, apply as you think it appropriate.)
2.1 PACKING

8
B

2
3

6
5

D
4

6 XV-EV51
1 2 3 4
5 6 7 8

PACKING parts List


Mark No. Description Part No. Mark No. Description Part No.
1 Operating Instructions XRB3017 5 Front Pad M XHA3130
6 Rear Pad M XHA3131 A
(English)
2 Operating Instructions XRC3073 7 Packing Case See Contrast table (2)
(Chinese) 8 Correct Sheet XRH3007
NSP 3 Polyethylene Bag Z21-038
(0.03 x 230 x 340)

4 Packing Sheet AHG7053

(2) CONTRAST TABLE


XV-EV51/ZLXJ/NC and XV-EV21/ZLXJ/NC are constructed the same except for the following :
Mark No. Symbol and Description XV-EV51/ZLXJ/NC XV-EV21/ZLXJ/NC B
7 Packing Case XHD3305 XHD3308

XV-EV51 7
5 6 7 8
1 2 3 4

2.2 EXTERIOR SECTION

A 3 37
27
35
C 39
XV-EV51
Only
7
K
40 28

B E
F 25 29
G 40 24
Refer to 23
C 4
"2.4 LOADING MECHA ASSY". 32
B 40
D B 9

A E H
38
2 32 8
40 I
40 21 O
G
16 XV-EV51
12 H 38 Only
38
39 39
52 38
L 48 39
O 44 K
39 J M N
11 39 I
C
40
39
39

42 30
F L 39
5
45 K
J
39 M
39 N 46 39 19
40 47
39
43
49 G 14
D
50
51
C 13
6 18
41
D E F A
22 15 10
1
40
20
39

Refer to
"2.3 FRONT PANEL SECTION".

A
B

E
36
42
17
NON-CONTACT

CONTACT SIDE

31

26
33
SIDE

43
34
F
39

8 XV-EV51
1 2 3 4
5 6 7 8

EXTERIOR SECTION parts List


Mark No. Description Part No. Mark No. Description Part No.
1 FM/AM TUNER Module AXQ7228 27 Deck Lens XAK3327
28 Deck Door XAN3047 A
2 IF Assy See Contrast table (2)
3 AF Assy See Contrast table (2) 29 Ratch Mold XMR3001
4 DECK Assy See Contrast table (2) 30 Side Bonnet L XNE3026
5 DVDM Assy AWM7684
31 Side Bonnet R XNE3027
6 DVD IF Assy AWM7677 32 Binder ZCA-SKB90BK
7 DSP Assy See Contrast table (2) 33 Tray Cap XAK3325
8 DECK Mechanism Unit XYM3015 34 DVD Badge XAK3331
NSP 9 LOADING MECHA Assy VWT1203 35 Top Panel XAK3326
10 DC Fan Motor AXM7025
NSP 36 Front Panel Assy See Contrast table (2)
B
NSP 11 Earth Lead Wire DE012VF0 NSP 37 Top Panel Assy XXG3131
12 11P Flat Flexible Cable XDD3114 38 Screw VPZ30P080FZK
13 13P Flat Flexible Cable XDD3115 39 Screw BBZ30P080FZK
14 30P Flat Flexible Cable XDD3116 40 Screw BBZ30P080FMC
15 16P Flat Flexible Cable XDD3117
41 Screw BPZ30P350FZK
16 Connector Assy 5P XDE3055 42 Screw VPZ30P080FNI
NSP 17 Chassis XNA3011 43 Screw BBZ30P080FNI
18 Rear Panel A See Contrast table (2) 44 Adapter 02 L ANW7247
19 Rear Panel B See Contrast table (2) 45 Adapter 02 R ANW7248
20 Mecha Frame XNG3082
C
46 Shield Case ANK7108
21 DVD Shield XNG3083 47 Heat plate ANG7426
22 GND Plate XNG3084 48 Radiation Sheet AEB7255
23 Ratch Spring ABH7130 49 Cushion AEB7267
24 Damper Assy AXA7052 50 FFC Barrier AEC7443
25 Door Spring L XBH3010
51 FFC Spacer AEC7442
26 Leg Cushion XEB3028 52 Caution Label VRW1699

(2) CONTRAST TABLE


XV-EV51/ZLXJ/NC and XV-EV21/ZLXJ/NC are constructed the same except for the following : D
XV-EV51/ZLXJ/
Mark NO Symbol and Description XV-EV21/ZLXJ/NC
NC
2 IF Assy XWZ3617 XWZ3627
3 AF Assy XWZ3618 XWZ3628
4 DECK Assy XWX3067 XWX3066
7 DSP Assy AWX8059 Not used
18 Rear Panel A XNC3160 XNC3180

19 Rear Panel B XNC3161 XNC3176


NSP 37 Front Panel Assy XXG3129 XXG3130

XV-EV51 9
5 6 7 8
1 2 3 4

2.3 FRONT PANEL SECTION

A
8
33

J 33
D5108
D5107
9 6
6

B 11
13

11

14 B 4 33
15
12
L
C 33

18
21 16 19
C
B
2
33
22 35
A
26 I
30 17
D
27
34
24
33
A H 28
23
3 33
29
25 33 33

37 31
E
33
10

38
M
NON-CONTACT

36 39 5
CONTACT SIDE
SIDE

F 32 20

10 XV-EV51
1 2 3 4
5 6 7 8

FRONT PANEL SECTION parts List


Mark No. Description Part No. Mark No. Description Part No.
1 DISP 1 Assy XWZ3619 21 Display Button L XAD3149
22 Display Button R XAD3150 A
2 DISP 2 Assy XWZ3620
3 DISP 3 Assy XWZ3621 23 Play Button XAD3151
4 LED Assy XWZ3622 24 Dolby Button L XAD3154
5 MIC Assy See Contrast table (2) 25 Dolby Button R XAD3155

6 LED (D5107, D5108) NSPWF50BS-9706 26 FUNC. Button L XAD3152


7 LCD XAV3016 27 FUNC. Cover L XAK3328
8 11P Flat Flexible Cable XDD3113 28 FUNC. Button R XAD3153
9 LCD Holder XMR3052 29 FUNC. Cover R XAK3329
10 MIC Knob XAA3024 30 Front Panel M See Contrast table (2)

B
11 Diffusion Sheet XAK3321 31 Damper Assy XXA3029
12 Display Window See Contrast table (2) 32 Leg Cushion XEB3028
13 LCD LT Cond XAK3323 33 Screw VPZ30P080FZK
14 LCD Cover XAK3324 34 FUNC. Assy R XAD3158
15 Sensor Cover XAK3330 35 FUNC. Assy L XAD3157

16 Tray Lens XAK3332 36 Cushion XEB3004


17 FUNC. LT Cond XAK3333 37 Gap Cover XMR3055
18 LT Cond XAK3334 38 Magnet XMF3003
19 LT Cover XAK3335 39 Screw 2x4 B XBA3011
20 Jack Door XAN3048
C

(2) CONTRAST TABLE


XV-EV51/ZLXJ/NC and XV-EV21/ZLXJ/NC are constructed the same except for the following :
Mark No. Symbol and Description XV-EV51/ZLXJ/NC XV-EV21/ZLXJ/NC
5 MIC Assy XWZ3626 XWZ3623
12 Display Window XAK3322 XAK3343
30 Front Panel M XMB3084 XMB3089

XV-EV51 11
5 6 7 8
1 2 3 4

2.4 LOADING MECHANISM ASSY

Note : 8 To
6 DVDM
A
Refer to CN8

" Application of Lubricant".


8
8
To DVDM
CN4
Daifree To DVDM
GEM1036 CN2 2
8 Refer to
"2.5 TRAVERSE MECHANISM
ASSY-S".

12
Lubricating Oil 18 20
3
GYA1001

13
23 A 22
17
4 5
16

22 19
C

21

15
22
7 A

10
14
11
Lubricating Oil
D GYA1001
1
9 D
22 22
LOADING MECHANISM ASSY parts List
Mark No. Description Part No. Mark No. Description Part No.

NSP 1 LOAB Assy VWG2346 16 Drive Gear VNL1923


2 Traverse Mechanism Assy-S VXX2858 17 SW Lever VNL1925
3 Loading Motor Assy VXX2505 18 Clamper Plate VNE2251
4 Motor Pulley PNW1634 19 Bridge VNE2252
E 5 Carriage DC Motor / 0.3W PXM1027 20 Clamper VNL1924

6 Flexible Cable (26P) VDA1864 21 Screw JGZ17P028FMC


7 Connector Assy 2P VKP2253 22 Screw Z39-019
8 Float Rubber VEB1327 23 Tray VNL1920
9 Belt VEB1330
10 Stabilizer VNE2253

11 Loading Base VNL1917


12 Float Base DVD VNL1918
13 Drive Cam VNL1919
F
14 Gear Pulley VNL1921
15 Loading Gear VNL1922

12 XV-EV51
1 2 3 4
5 6 7 8

Application of Lubricant
A
Lubricating Oil
GYA1001
Around the shaft

No. 11
Loading Base

Lubricating Oil
GYA1001

Lubricating Oil
No. 13 Lubricating Oil GYA1001
Drive Cam GYA1001

No. 13
Rear View Top View Drive Cam
Inner side of a ditch Inner side of a ditch
Lubricating Oil Lubricating Oil
GYA1001 GYA1001

D
No. 23 Daifree No. 23 Daifree
Tray GEM1036 Tray GEM1036
Concave of unevenness Concave of unevenness

Inner side of a ditch


Daifree E
GEM1036

Top View Bottom View


Side of the rib
Concave of unevenness
Daifree
Daifree GEM1036
GEM1036

XV-EV51 13
5 6 7 8
1 2 3 4

2.5 TRAVERSE MECHANISM ASSY

17 (Torque : 0.12 ± 0.01 N•m)

Silicone Adhesive
12 GEM1037

8
3
18

10 18
B
18
10 7

14
9
1
6

19

C Silicone Adhesive
GEM1037
13 4 (Adjustment Screw)
16 17 (Torque : 0.12 ± 0.01 N•m)

To
DVDM
CN8

5 15

Screw Tight
D Silicone Adhesive
5 GYL1001
GEM1037
To SSIB
CN1 17 (Torque : 0.12 ± 0.01 N•m)

16
2

E To DVDM
CN4
NON-CONTACT

CONTACT SIDE

11
SIDE

14 XV-EV51
1 2 3 4
5 6 7 8

TRAVERSE MECHANISM ASSY parts List


Mark No. Description Part No.
1 Spindle Motor VXM1088
A
2 Stepping Motor VXM1090
> 3 Pickup Assy-S OXX8004
4 Skew Screw VBA1080
5 Skew Spring VBH1335

6 Guide Bar VLL1514


7 Sub Guide Bar VLL1515
8 Hold Spring VNC1017
9 Joint Spring VNC1019
10 Support Spring VNC1020

B
NSP 11 Mechanism Chassis VNE2248
12 Slider VNL1811
13 Spacer VNL1913
14 Joint VNL1914
15 FFC Holder VNL1915

16 Screw BBZ20P050FZK
17 Tapping Screw OBA8009
18 Screw PMA26P100FMC
19 Damper Sheet VEB1335

XV-EV51 15
5 6 7 8
1 2 3 4

3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM


3.1 BLOCK DIAGRAM
A

3.1.1 SIGNAL ROUTE(1/2)


B IF ASSY
CN5903
Refer to 3.1.2 SIGNAL ROUTE(2/2)

CN
B
F DVDM ASSY

(D)
CN5901
G
DVD IF ASSY (V)

(Y)

(C)

16,17
C CN5801

E DECK ASSY (D)

EV-51 : PDC093
EV-21 : PDC097

8 4 3 7 5,6
CN5509

17 16 2

CN2506
RECL

PBL

(REC)

J DISP1 ASSY
CN5101

8
4 3 7 5,6

DSP ASSY
H XV-EV51 Only

16 XV-EV51
1 2 3 4
5 6 7 8

SIGNAL ROUTE (SL)


(PB) : SL AUDIO SIGNAL
: PB SIGNAL (FL)
(REC) : FL AUDIO SIGNAL
: RECORDING SIGNAL (C)
(TX) : C AUDIO SIGNAL
: AUDIO SIGNAL (TUNER) (SW)
(V) : SW AUDIO SIGNAL
(V) : V SIGNAL VIDEO (D)
: DIGITAL AUDIO ROUTE
(Y)
(Y) : Y SIGNAL VIDEO
(C)
(C) : C SIGNAL VIDEO

C AF ASSY
B
CN5504 CN8101 (PB)
M MIC ASSY
(TX)

(PB) JA5401

J5401

(PB)
(PB)
M-EV51
CN8901
(POWER AMPLIER) C
(REC)
Service Manual
CN5503

CN8301
Order No.RRV2663

(TX)
CN5501

CN8701
D
A
CN3002
FM/AM TUNER
MODULE

XV-EV51 17
5 6 7 8
1 2 3 4

3.1.2 SIGNAL ROUT(2/2)


Work RAM for Error Correction Work RAM for MPEG Decode X601
27MHz
IC302 IC604
K6T1008V2E-TB70 X301 K4S641632F-TC75 2 6 5 3
A 1M SRAM 20MHz 64M SDRAM
IC605 TC7WU04FU
CN25
1 131 132 120 (26P)

RF(TP) 3 RFSACD FREOUT FREIN PIXCLK


PIO381 7 SQUEEZ
CN151 IC301 3
FE_DATA
(26P) (26P) PIO382 8 LETTER
Spindle B1 L6315ATXXTY OUT_DATA(0) 84 16 S_DATA
Q607
4
20 7 10 A B_OUT 25
Motor B2 FRONT END IC 5
21 6 12 B Q606
B3 • RF Demodulation G_OUT 26 7
15 12 18 C
B4 • Servo Control R_OUT 27 Q605 9
16 11 16 D • Servo Decode Q604 11
A Y_OUT 32
19 8 25 E • Error Correction
PICKUP C C_OUT 33 Q603 13
17 10 24 F PC(2) PC(6)
ASSY FACT TACT
123 124 38 42 CV_OUT 34 Q602 15
FDO TDO FG SPDL
PDM A_DATA0
B 3 20 PCMDATA0 52 22
T_RTN IN3- IN4- A_BCK
24 3 13 VM4- DAC_SCLK 51 21
T_DRV IC351 LOAD_DRV
25 2 12 VM4+ IN5- 17 116 HSYNC A_MCLK
26
F_RTN
1 10 VM3+
M56788AFP _PWM0 PCKCLK 55 24
F_DRV FTS Driver 5
23 4 9 VM3- A_LRCK
Focus, Tracking, LRCLK 56 26
Stepper and
Loading Drive 4
Stepping VM1+ VM1- VM2- VM2+ VM5- VM5+
Motor CN4 34 35 31 32 15 14
IC601
(Carriage) (4P) STI5519AVB-B0C
ST1-
4 BACK END IC CN22
M ST1+ (30P)
3 • System Control
ST2+ 2 • MPEG Video Decode
ST2-
1 • Video Encode
• Video DAC
Loading CN601 • Audio Decode
Motor (5P) CN9
C Assy LOD-
(5P) (MP3, Dolby)
1 1 1 • Sub-picture Decode DOUT
– + LOD+ SPDIF 57 1
M 2
3.3V
2 2
SW2 XCLOSE
CN602 3 3 205 XCLOSE
(2P) SW1 OPEN
5 5 204 OPEN
S101

D LOAB ASSY CN2


2
(12P)
H1+ 4 9 H1+
H1- 5 10 H1- IC251 FG
H2+ 6 11 H2+ BA6664FM FG 24
H2- 7 12 H2- Spindle
EC 22
H3+ 8 13 H3+ Driver SPDL PDM IC603
D H3- 9 14 H3- • Spindle Drive VYW1948
A1 3 • FG Detection 8M FLASH ROM
7 A1
A2 2 4 A2
A3 1
3
2 A3
F DVDM ASSY
CN401
(13P)

18 XV-EV51
1 2 3 4
5 6 7 8

1– =: Refer to "3.1.3 WAVEFORMS".


G DVD IF ASSY A
CN1902
(16P)
CN1962
(26P) 11 C832
Y
YOUT b 28 10
3
4 IC801 YOUT a 27
B 12 C822
5 14 Cb IN MM1567AJ C
COUT 33 6
7
G
12 CY IN 6 IN • 6 OUT 7 C812

CN5901
R VIDEO AMP V
9 16 Cr IN VOUT b 31 8
S_Y
11 6 Y IN VOUT a 30
S_C • LPF
13 2 C IN • AMP G
8
CYOUT b 25 12
V • Driver

B
15 4 V IN CYOUT a 24

R
9
22
CrOUT b 19 16 B
21 CrOUT a 18
24 B
10
CbOUT b 22 14
26 CbOUT a 21

R721 2 5 CN1901
(30P)
1 BCKIN
6 IC711 LOUT

B CN5903
Vout L 7 28
R722 PCM1742KE
2 DATA
1 Audio 2ch DAC AUDIO
16 MCLK OUT
3 4 ROUT
R723 Vout R 8 30
3 LRCKIN
CN1961 DIGITAL
(30P) C
OUT
1 24

3.1.3 WAVEFORMS
Note : The encircled numbers denote measuring point in the schematic diagram.

F DVDM ASSY
Measurement condition : No. 1 and 2 : reference A1 (DVD), T2-chp 19, Color-bar
IC301 - pin 3 [RF] IC251 - pin 24 [FG] IC251 - pin 2, 4, 7
1 V: 200mV/div. H: 0.1µsec/div.
2 V: 1V/div. H: 5msec/div.
3 [Spidle driver -A3, A2, A1]
V: 2V/div. H: 2msec/div.

GND [PLAY]

IC301 - pin 42 [SPDL_PDM]


4 [STOP→PLAY→STOP] [PLAY] [STOP]

Accelertar Brakes
ON ON
E
STOP PLAY STOP

V: 2V/div. H: 1sec/div. V: 2V/div. H: 500nsec/div. V: 2V/div. H: 500nsec/div.


IC601 - pin 116 [LOAD_DRV]
5 V: 1V/div. H: 5µsec/div. [Tray stops] [Tray is opening] [Tray is closing]

XV-EV51 19
5 6 7 8
1 2 3 4

3.2 OVERALL WIRING DIAGAM

A 3.2.1 OVERALL WIRING DIAGRAM(MEDIA PART 1/2)


Note : When ordering service parts, be sure to refer to "EXPLODED VIEWS and PARTS LIST" or "PCB PARTS LIST"

CN8701
CN8901

XV-EV51 Only
XV-EV51
Only CN5902

B
CN8001

C 1/2 - 2/2
AF ASSY
(XWZ3618 / XV-EV51) CN8101 DSPCK

(XWZ3628 / XV-EV21)

K DSPRQ
DSPRO
DSPCS
CDCOVF

(AWZ8059 / XV-EV51)
C

DSP ASSY
CN8002

DIRRX1 CN5507
DIRRX2
DIRRX3
MIC ASSY DIRRX4
DIRTX
(XWZ3626/
XV-EV51)
CN8751
(XWZ3623/ XDSPRST

XV-EV21)
CN8003

D
M J5401 CN8301 ADCR

ADCL
CN5506

E
CN5101 CN5508
I CN5102
DISP3 ASSY DISP2 ASSY
L (XWZ3621) (XWZ3620)
J5102
LED ASSY
(XWZ3622)

H
5301 J5202
DISP1 ASSY
F
J (XWZ3619)

J5203
CN5203

20 XV-EV51
1 2 3 4
5 6 7 8

A
XV-EV51 Only

FM/AM TUNER
CN3002 M-EV51 CN3001

(AXQ7228)
MODULE
(STEREO POWER AMPLIFIER)
Service Manual
DECK
order no. RRV2663 MECHA. (XYM3015)
CN5502
CN5501
CN5701
CN201 A ERASE
HEAD B

REC/PB
HEAD

XDD3115
CN5503 CN5801

CN2301 C

B IF ASSY
CN2302
(XWZ3617 / XV-EV51)
(XWZ3627 / XV-EV21)

CN5802
E
CN2506 DECK ASSY
CN5504 CN5903 (XWX3067 / XV-EV51)
(XWX3066 / XV-EV21)

CN1901 CN1961 D
DVD IF ASSY

DVDM ASSY
(AWM7684)
G DVD IF ASSY
XDD3116

(AWM7677)

F 1/2 - 2/2
CN1962
E
DVD IF ASSY

CN5505
CN1902
CN5509
XDD3117
CN5901 F

XDD3113

XV-EV51 21
5 6 7 8
1 2 3 4

3.2.2 OVERALL WIRING DIAGRAM (MEDIA PART 2/2)


A

F 1/2 - 2/2
DVDM ASSY
(AWM7684)

(F)
: FOCUS SERVO LOOP LINE
(T)
: TRACKING SERVO LOOP LINE
(S)
: SLIDER SERVO LOOP LINE
(AWM7677)/CN1961
DVD IF ASSY

B
G

(F)
(F) PICKUP ASSY-S
(F) (F) (OXX8003)
C (T)
(T)

(F) (F)
(F) (F)

(F)
(T)
(T)
(F)
(AWM7677)/CN1962
DVD IF ASSY

STEPPING MOTOR SPINDLE


(S) : VXM1090 MOTOR
(S) : VXX1088
(S)
G

(S)

LOAB ASSY
D (VWG2346) LOADING
MOTOR ASSY
: VXX2505
E

F
A
D B C D E
22 XV-EV51
1 2 3 4
5 6 7 8

3.1.3 WAVEFORMS
Note : The encircled numbers denote measuring point in the schematic diagram. A

F DVDM ASSY
Measurement condition : No. 1 and 2 : reference A1 (DVD), T2-chp 19, Color-bar
IC301 - pin 3 [RF] IC251 - pin 24 [FG] IC251 - pin 2, 4, 7
1 V: 200mV/div. H: 0.1µsec/div.
2 V: 1V/div. H: 5msec/div.
3 [Spidle driver -A3, A2, A1]
V: 2V/div. H: 2msec/div.

GND [PLAY] B
IC301 - pin 42 [SPDL_PDM]
4
[STOP→PLAY→STOP] [PLAY] [STOP]

Accelertar Brakes
ON ON
STOP PLAY STOP

V: 2V/div. H: 1sec/div. V: 2V/div. H: 500nsec/div. V: 2V/div. H: 500nsec/div.

IC601 - pin 116 [LOAD_DRV]


5 V: 1V/div. H: 5µsec/div.
[Tray stops] [Tray is opening] [Tray is closing]
C

G DVD IF ASSY
Measurement condition : No. 1 to 6 : reference A1 (DVD), T2-chp 1
No. 7 to 12 : reference A1 (DVD), T2-chp 19, Color-bar
IC711 - pin 16 [AUDIO DAC -MCK] IC711 - pin 1 [AUDIO DAC -BCK] IC711 - pin 3 [AUDIO DAC -LRCK]
1 V: 1V/div. H: 20nsec/div.
2 V: 2V/div. H: 200nsec/div.
3 V: 2V/div. H: 5µsec/div. D

GND

IC711 - pin 3 Foot of C812 (IC801 - pin 30, 31)


4 [AUDIO DAC -LRCK]
7 [Composite Video output]
V: 2V/div. H: 500nsec/div. V: 1V/div. H: 10µsec/div.

IC711 - pin 1
5 [AUDIO DAC -BCK] 4 E
V: 2V/div. H: 500nsec/div.
5
IC711 - pin 2
6 [AUDIO DAC -DATA]
V: 2V/div. H: 500nsec/div. 6

Foot of C842 (IC801 - pin 24, 25) Foot of C832 (IC801 - pin 27, 28)
8 [Component Video output -Y]
11 [S Video output -Y]
V: 1V/div. H: 10µsec/div. V: 1V/div. H: 10µsec/div.

Foot of C852 (IC801 - pin 18, 19) Foot of C822 (IC801 - pin 33) 11
9 [Component Video output -Cb]
8 12 [S Video output -C]
V: 2V/div. H: 10µsec/div. V: 1V/div. H: 10µsec/div.
12
9
10 Foot of C862 (IC801 - pin 21, 22) F
[Component Video output -Cr]
V: 2V/div. H: 10µsec/div. 10
A B C D
XV-EV51 23
5 6 7 8
1 2 3 4

3.3 FM/AM TUNER MODULE

A FM/AM TUNER MODULE (AXQ7228)

B
FM FRONT END
(FM)

(FM)
(FM)

(FM)
(FM)
C

(FM)
(FM)

(FM) (FM)
(AM) (AM)
(AM)
(AM)

MW RF TUNING BLOCK
(AM)

(FM)
D

(AM)

OSC : 981 - 2052kHz 9k step

A
24 XV-EV51
1 2 3 4
5 6 7 8

: The power supply is shown with the marked box.


(TX)
: AUDIO SIGNAL ROUTE (TUNER)
(AM)
: AM SIGNAL ROUTE
(FM)
: FM SIGNAL ROUTE
B

(AM)
(AM)

CN5701
(AM)
(AM)

(AM)
(TX)
(FM)
(TX)
(AM)

B
C
(AM)
(FM)
(AM)

(TX)
(TX) CN201

(FM) (FM)
(TX)
(AM)
L201

ATE7003
D

A
XV-EV51 25
5 6 7 8
1 2 3 4

3.4 IF ASSY

G CN1902
A B IF ASSY
(XWZ3617
/ XV-EV51) CN5901
(XWZ3627

CN5502
(S_Y)

CN5902
/ XV-EV21)

(S_C)
(V)
(V)
(S_Y)

(S_C)
(S_Y)

CN5503
CN8901

C
CN5507
C 2/2
K CN8001

(TX)
CN5504
EV- EV-
51 21

D
CN8101

(D)
C 2/2
K CN8002

(CD)

EV-51
CN5506 EV-21
EV-51
E Only
XV-EV51
(CD)
ONLY CN5505
CN5508
CN8751
K CN8003

XV-EV21
Only
C 2/2

CN5903

F
(CD)

B
(D)

G CN1902
26 XV-EV51
1 2 3 4
5 6 7 8

TO M-EV51 or M-EV21 Power Amplfier A

: The power supply is shown with the marked box.

CN5501
B

CN5701

CN201
(TX)

A
EV-51
EV-21

To. Mecha Deck


CN5802
EV-51

CN5801 E
E
EV-51
CN2506
CN5509

SIGNAL ROUTE
(CD) (V)
: CD AUDIO SIGNAL ROUTE : V SIGNAL ROUTE F
(TX) (S_C)
XV-EV21 : AUDIO SIGNAL ROUTE (TUNER) : S-VIDEO OUT C SIGNAL ROUTE
Only (D) (S_Y)
J CN5101 : DIGITAL SIGNAL ROUTE : S-VIDEO OUT Y SIGNAL ROUTE
B
XV-EV51 27
5 6 7 8
1 2 3 4

3.5 AF ASSY(1/2)

A
(AUX) (AUX)

(CD)
(AUX)
2/2

(TX) (TX)
B
C

(TX)
(AUX)
(REC)
(PB)
(PB)
CN8101
(CD)
C
B CN5504

(REC)

(CD)
(REC)

(CD)
(TX)
(REC)

XV-EV51 Only
(REC) (TX)

EV-51
EV-21

F (REC) (REC)

C 1/2
28 XV-EV51
1 2 3 4
5 6 7 8

SIGNAL ROUTE A
(PB) (AUX)
: PB SIGNAL : AUX SIGNAL
(REC) (MIC)
(CD) (CD) : RECORDING SIGNAL : MIC OUT SIGNAL
(TX)
: AUDIO SIGNAL (TUNER)
JA8401 (CD)
: CD SIGNAL

(CD)

C 1/2AF ASSY CN8301

M J5401
(XWZ3618 / XV-EV51) (MIC)
(XWZ3628 / XV-EV21)

(MIC)

C 2/2
D
(MIC) (TX) (MIC)

(REC)

EV21 Only

2/2
(REC) (TX) (REC)

C
E
XV-EV51 Only
(REC)
(REC)

2/2
C

(REC) F

: The power supply is shown with the marked box.

C 1/2
XV-EV51 29
5 6 7 8
1 2 3 4

3.6 AF ASSY(2/2)

C 1/2
(MIC) (MIC)
A

SIGNAL ROUTE
(MIC)
: MIC SIGNAL
(TX)
: AUDIO SIGNAL (TUNER)

B
C 1/2

XV-EV51
Only

D CN8751
B CN5505

C 2/2
30 XV-EV51
1 2 3 4
5 6 7 8

(MIC)
C 2/2AF ASSY A

(XWZ3618 / XV-EV51)
(XWZ3628 / XV-EV21)
(MIC)

CN8901
(TX) B

CN5503
(MIC)
(MIC)

B
XV-EV51
Only

(TX)
C

(TX)

CN8701

To M-EV51 Power Amplfier

C 1/2
D

F
: The power supply is shown with the marked box.

C 2/2
XV-EV51 31
5 6 7 8
1 2 3 4

3.7 DECK ASSY

A DECK ASSY
E (XWX3067/XV-EV51)
(XWX3066/XV-EV21)

(PB)
CN2301

(PB)

B CN2302

(REC)

(REC)

(REC)
C

(REC)

(REC)

E
32 XV-EV51
1 2 3 4
5 6 7 8

A
: The power supply is shown with the marked box.

(PB)

(PB)

(PB)
B

(PB)
(PB)
(REC)

EV51:-16.3dBV
EV21:- 6.5dBV

(REC)

(REC)
C

EV-51
EV-21

D
SIGNAL ROUTE
(PB)
: PB SIGNAL
(REC)
: RECORDING SIGNAL

E
(REC)
(PB)

CN2506

B CN5801 F

E
XV-EV51 33
5 6 7 8
1 2 3 4

3.8 DVDM ASSY(1/2)

F 2/2
A
F 1/2 DVDM ASSY (AWM7684)

(S)
(S)
(S)

(S)
B D
CN601

(F)

(T)
(F)

(T)
C
PICKUP ASSY-S

(RF)
(RF)
(RF)

D (RF)
(RF)
(RF)
(F)
(T)
(T)
(F) (F)
(T)

(T)
(T)
STEPPING
MOTOR

E (S)
(S)
(S)
(S)
3
SPINDLE
MOTOR

F 1/2
34 XV-EV51
1 2 3 4
5 6 7 8

A
1,2,3,4 : Refer to "3.1.3 WAVEFORMS".
(RF)
: RF SIGNAL ROUTE
: DATA SIGNAL ROUTE
(F)
: FOCUS SERVO LOOP LINE
(T)
: TRACKING SERVO LOOP LINE
(S)
: SLIDER SERVO LOOP LINE

B
F 2/2

IC302
K6T1008V2E-TB70
WORK SRAM (1M)

1
(RF)

E
(RF)

: The power supply is shown with the marked box. F

F 1/2
XV-EV51 35
5 6 7 8
1 2 3 4

3.9 DVDM ASSY(2/2)

A F 2/2
DVDM ASSY
(AWM7684)

IC603 VYW1848
(MBM29LV800TA-90PFTN)
PGM 8M FLASH MEMORY

D
(G/Y)

(V)

(D)
(B/Cb)

(S_C)
(S_Y)
(R/Cr)

E
(D)
(D)

F 2/2 F 1/2
36 XV-EV51
1 2 3 4
5 6 7 8

: The power supply is shown with the marked box. A

5: Refer to "3.1.3 WAVEFORMS".

CN1961
C
(D) (D)
IC604
K4S641632F-TC75
64M SDRAM

(V) (V) G
(S_C) (S_C)

CN1962
(S_Y) (S_Y)
(R/Cr) (R/Cr) D
(G/Y) (G/Y)
(B/Cb) (B/Cb)
(V)
(V)

(R/Cr)
(R/Cr)

(S_C)
: DATA SIGNAL ROUTE
(V)
(S_C) : V SIGNAL ROUTE
(S_C)
: S-VIDEO OUT C SIGNAL ROUTE E
(G/Y) (S_Y)
(G/Y) : S-VIDEO OUT Y SIGNAL ROUTE
(R/Cr)
: R/Cr SIGNAL ROUTE
(G/Y)
: G/Y SIGNAL ROUTE
(B/Cb)
(S_Y) : B/Cb SIGNAL ROUTE
(S_Y)
: AUDIO SIGNAL ROUTE
(D)
(B/Cb) : AUDIO (DIGITAL) SIGNAL ROUTE
(B/Cb)

F 2/2
XV-EV51 37
5 6 7 8
1 2 3 4

3.10 DVD IF ASSY

G DVD IF ASSY (AWM7677)


(D) (D) (D)

B
F 2/2 CN21

(D)

(S_C) (S_C) (S_C)

(V) (V) (V)

(S_Y) (S_Y)
(S_Y)
D
(G/Y)

(G/Y) (G/Y)
(B/Cb)
(B/Cb) (B/Cb)

(R/Cr) (R/Cr) (R/Cr)


F 2/2 CN25

(S_C) (V)

(S_Y)

(R/Cr)
E
(G/Y) (G/Y)

(B/Cb) (B/Cb)

G
38 XV-EV51
1 2 3 4
5 6 7 8

(V) (R/Cr)
A
: V SIGNAL ROUTE : R/Cr SIGNAL ROUTE
(S_C) (G/Y)
: S-VIDEO OUT C SIGNAL ROUTE : G/Y SIGNAL ROUTE
(S_Y) (B/Cb)
: S-VIDEO OUT Y SIGNAL ROUTE : B/Cb SIGNAL ROUTE
(D) : AUDIO SIGNAL ROUTE
(D)
: AUDIO (DIGITAL) SIGNAL ROUTE

(D)
2 5
1
6

3 4

(D)
C

BCN5903
(V) (S_C) (D)

(S_Y)
D
(G/Y)

(B/Cb)

(R/Cr)

CN5901

E
(V) (S_C) (S_C) (V) (S_C)

(S_Y) (S_Y) (S_Y)


B

(G/Y) (G/Y)

(B/Cb) (B/Cb) (B/Cb)

(R/Cr) (R/Cr) (R/Cr)

1, 2, 3, 4, 5, 6: Refer to "3.1.3 WAVEFORMS"


F
: The power supply is shown with the marked box.

G
XV-EV51 39
5 6 7 8
1 2 3 4

3.11 DISP1, DISP2, DISP3 and LED ASSYS

A
LED ASSY
L (XWZ3622)

CN5203

J5203

B
I DISP 2 ASSY
(XWZ3620)

J DISP 1 ASSY
(XWZ3619)
C

CN5101

CN5509
B
D

CN5102

E J5102
I

DISP 1 ASSY
S5101: Sound Mode
S5102: EV-51_Karaoke
EV-21_Vlrtual Surround
S5103: ST Memory
S5104: Enter
S5105: Display
S5106: TIME/CLOCK ADJ
F

I J L
40 XV-EV51
1 2 3 4
5 6 7 8

J5102

CN5102
J
B
J5202

I DISP 2 ASSY
(XWZ3620)
C

DISP 2 ASSY
S5201: PLAY
H DISP 3 ASSY
(XWZ3621)
S5202: VOL - J5202
S5203: ( - )
S5204: DVD / CD
S5205: STOP
S5206: VOL +
S5207: ( + )
S5208: TAPE
S5209: LINE 1 D
S5210: OPEN/CLOSE
S5211: TUNNER

DISP 3 ASSY
S5301: ASES
S5202: DOBLY NR
S5203: REV MODE
S5204: REC/STOP

: The power supply is shown with the marked box.

H I
XV-EV51 41
5 6 7 8
1 2 3 4

3.12 DSP ASSY

K DSP ASSY
(AWZ8059)
XV-EV51 : Only

K
42 XV-EV51
1 2 3 4
5 6 7 8

CN5503
B
C

CN5506
B
D

CN5504
E

F
: The power supply is shown with the marked box.

K
XV-EV51 43
5 6 7 8
1 2 3 4

3.13 MIC ASSY

M MIC ASSY
(XWZ3626 / XV-EV51)
(XWZ3623 / XV-EV21)

B JA5401

EV-51
EV-21

JA5402

M
44 XV-EV51
1 2 3 4
5 6 7 8

C CN8301

J5401

M
XV-EV51 45
5 6 7 8
1 2 3 4

4. PCB CONNECTION DIAGRAM


4.1 LOAB ASSY
A

NOTE FOR PCB DIAGRAMS :


1. Part numbers in PCB diagrams match those in the schematic 3. The parts mounted on this PCB include all necessary parts for
diagrams. several destinations.
2. A comparison between the main parts of PCB and schematic For further information for respective destinations, be sure to
diagrams is shown below. check with the schematic diagram.
Symbol In PCB Symbol In Schematic 4. View point of PCB diagrams.
Part Name
Diagrams Diagrams
B C E B C E
Connector Capacitor
B
Transistor
B C E

B C E B C E SIDE A
Transistor
B C E with resistor

D G S D G S
Field effect
D G S transistor
P.C.Board Chip Part SIDE B

Resistor array

C
3-terminal
regulator

SIDE A SIDE B

D
D LOAB ASSY D LOAB ASSY

(VNP1837-B) (VNP1837-B)

CN602 CN601 CN601 CN602

M F CN9
E
LOADING
MOTOR
ASSY

D
46 XV-EV51
1 2 3 4
5 6 7 8

4.2 FM/AM TUNER MODULE

SIDE A SIDE B A

A FM/AM TUNER MODULE SIDE A

CN201
B CN5701 (ANP7338-B)
Q202

A FM/AM TUNER MODULE SIDE B

(ANP7338-B)
Q201 IC201 Q203 Q205 F
IC202 Q204

A A
XV-EV51 47
5 6 7 8
F
E
B
A

D
C

48
F
CN12 R585 R575
F

R502 R501 R582 24 2


R503 R588

R584
SIDE A

1
1

1
23 1
C 23
1
4 1 CN601

CN11
R541
A C624 D
R398 R551 C625 C603
208 157 157
R552
4.3 DVDM ASSY

24

23

R553

1
1

10
156

R571
R572
C607 R600

1
DVDM ASSY

R670

1
CN602

C608

1
C623 156

Q607
Q606

2
2

C616
Q607 Q606

R617
R545
1
Q605

Q605 C609 E
24 2
IC601

23

R612

CN25
R613
Q604 Q603

C621

CONTACT SIDE
Q603 Q604

VNP1866

XV-EV51
R555
Q602

CN25
Q602
R556

CN23
IC601
R558

G CN1962
R630

C626
CN603
2

52
R559

3
3

R562
C610
105

V+5V
R619 53 R565
104
R620

26
26
C622 R566
R546

R621 C628

E88558
C611

26
R622 R624 C316 R563 C612 R662
R316 R317
C605

R623 R340 A

1
R399
C335

R625
R581

R583 C650 R642


C606
R580
R578 R564
R576
R574

R587
R589
R586

1
C321 IC301

1
C317

R339 108
C328 73 B R310 R309
C327 E
72

C322 R641
109
R306

B C340 R569
R567
R643

C333 C641

4
4

R322 C615

CN21
IC303

L310

R304 C613
L308

R330 C651
C323

R632

CN22
C302
R305 R631
C315
IC301

CN22

G CN1961
C342

C301
CONTACT SIDE
IC303
R300

C332
R301

C326
C313 R332
R400
4

ND SIDE
01
C329

R401 D301
C
R632

22
C302
R305 R631

C315
IC301

CN22

1961
C342
C301

CONT
IC303
R300
C332
C326 R301
C313 R332

R400
C329
R401 D301

X301
C104
C334 R259
R258

144
R333 C259

37
IC110
5

5
36 R257
IC111 1

SECOND SIDE
R155 C311 C343 C331 37 R256
FC

R302
C109 C105 C338

C330
R255

1
8
R303
R396 C339
R254

30
R379
C359

R395
R329

30
DC

C401
C
IC110

R394 C256
C324

30

R380
R328
R366
1

41
C325
C

58
28

R393
R359 R361 R3 C373 R353
IC111

C360 R358 R351

R362
5
R360 C357 R4
R357 R365 C351

R392
R338
C103 R157 GND 21 1
V+5S

11
30

29

R146

1
IC251

6
6

R145

R121

C108
C251 C258 R261 C257

IC251

R147
C106

R158 R144
CN9
650 R123

780
R156
R266

C353
Q102
IC351 Q101

C107
14
15

5
Q102 Q101 22 F

5
R137
R136

R133
R140
RF C255
1 25 IC351 C248
C249 CN5

XV-EV51
17 1
CN7
C361

CN90
2 26
R368

26

CN9
1
R354
R372
R371
C366
C365

D CN601
R378 CONTACT SIDE

7
7

R355
R370

C362 12 CN2 1
F R377
CN8 R391 C250 1 4
B C391 CN4 A

(VNP1866-D)
CN8
CN4
CN2

ASSY
PICKUP
MOTOR
MOTOR
SPINDLE
8

8
STEPPING

F
SIDE A

49
E
A

D
C

F
B
R337
R336

4 C643

SIDE
IC

9 8 7 6 5 4 3 2

23 C404
9
8
R320

71 L300 9 L311
C308 IC304 R385
R319 R331
R673

C318
C309

R384
R407

R318
C307
R315

CN22
V+3R5D
R321

C341 R405
IC302

C412
C310

C413
4

4
R406
Q300

C
B
A

Q300

HEAT-RESISTANCE
IC302

R153
6
1
Q105

PRE-FLAX
4
R154
3

C254 C405 C403


Q105
R152
R151

C305 VREF21

30
C304
R1
LEAD FREE SOLDER

R150 R149
NORMAL SOLDER

C253

V+5S C111
C113
3

3
R113 R2
R375 R374
R262 R265

R367 R376 R141

3
4

1
R345
Q103

C369 R139 R142


R344

R111
R346

1
6

CN9

XV-EV51
GNDM R138 C102
C149 R115 R125
Q103 C112 C101

5
R356 C110
DVDM ASSY

R110
25 R118 1 R129 R179
1 V+12M
17 R128 R178
V+6B C368
R341 26 2 R127 R177
2

2
C148
C158
R172
R171
4 R100

R373 R327
R126 R176
1

R364 R326
12 CN4
CN2
1
C157
26 1
F

CN2 CN4 CN8


1

1
SIDE B

F
50
C

D
A

F
B

F
C

D
A

51
SIDE B

F
8
8

(VNP1866-D)
R639
C631
R601
R602 C630
R653

24 1 R577
R671
C629

R640
IC603

Q601
R547 R579
R590 R666
R652 Q652 R504
C634 R647

R654
R668

R650

R542
R718
D601
IC603

R554
R651 Q651
Q651
Q652

R648

IC605 R543 R720


4 1 R719

1
7

7
R717
IC605

3 1 R544
C632
X601

1
Q601

5
8 L601
4 6 R689
25 R686

XV-EV51
R683 R691
84
R638

C648
C614

C638 C619
R570 R695 R680 R690
R646 C633

R618
54 28 R677 R688

CN25
R674 R687

R616
R645

C645
R568 R685
R684
IC604

L603

C617
R681 R682
R678 R679
6

6
R561
R560
R675 R676
R604 1 27
C635

R603 L602
R505 C637

R557 R702
IC604

C618
C696 C636

AWM7
VWS1 0
C627

C698
1
R610 C620

26 3
C699
R699

C697 R609
R607

9
8
7
6
5
4

2
1
9
8
7
6
5
4
3
2
1
0
R608 R626

9
8
7
6
5
4
3
2
1
0
3 2 1 0

R605
0
0

R606 R660

A-
FIRST SIDE
L324 C319

V+2R5
R313 R311

CN
1N
R334 R335
1
1

Q
J

5
5

R312

16
1
R659
7 6 5 4 3 2 1 0

R314

C414 C643
IC304

R337
R336
23 C404

9
8
R320
71 L300 9 L311
C308 IC304 R385
R319 R331

R673
C318

C309
R384

R40
R318
C307
SIDE A

F CN22 F CN25
4

4
(ANP7425-A)
IC1904
IC1905
IC1902

IC1906
IC1901
IC1903

CN1961 CN1962
R1993 CN1961 CN1962
Rch

UPSIDE

CN1963
R1992

GNDA
ICT

C1947
FC

C1932

R1981
3

3
26
C1955
Lch

DOUT

CONTACT
11 1 4 4 1 1
A

R1932 3030 26
1 C1948
CN1902 R1931
C1931

C1981 C1972 C1974


L1981
C1971 R1924
V+12

C1973
11

C1941
R1926
V+6M
GNDM

R1925

C1945
R1930
C1943
V+2.5

C1922

R1929
C1923

C1925

D
CN1902

NE M B1

R1928
8 1
V+3.5

8 1

C1926
C1950
GNDD

C1979 C1977 C1975

XV-EV51
C1930 C1910
R1983 C1980 C1978 C1976
R1982 DVD IF UNIT

C1928
9 16
9 16
C1918
AWM7677

C1915
1616

C1929 IC1905
R1927 IC1921 C1916 R1904
C1908 R1902 C1914 C1917
CONTACT

C1996
UPSIDE

C1906 D1901 C1990


L1903
C1903
R1901 C1909
C1993

IC1906
8 55

IC1901

C1997
C1992
B CN5901

C
11 44
C1991
B

R1903
IC1902

IC1903

Q1901
C1919

IC1904
VPRE+5M
2

2
C1994

1/4
L1901
V+3.3
V+5V

C1911
C1907
C1902
C1905 V+5D C1995 D1902
G DVDIF ASSY

VPRE+5 C1912
4.4 DVD IF ASSY
1

1
SIDE A

G
52
C

D
A

F
5 6 7 8

SIDE B SIDE B A

G DVD IF ASSY
CN1901

1091NC
30 30 1
1
CONTACT B
UPSIDE

3191C
0491R 5391D
4391R 5391R
2191R

1191R

2391Q
Q1931 Q1932

2491R

1391Q
1791R

2391D

3391D
1691Q
2791R
Q1961

3 2 1 0
7 1
CN1961

0
0
7 1 1 3691C

1
1

2691C
2691CI
5691R

4091C
IC1962

3691R
9 8 7 6 5 4 3 2 1 0
4691R 8 41

7691R
8691R 8 41 C

5791R
4791R

1691CI 2691R
14 8

1691C
14 8

4391D
1091C
IC1961

9691R
11 7

1491R
1691R
1 7
C
B
A

6691R
0791R Q1921
1291Q

8991C
2291Q
3291R
0291R

Q1922

2091L
7891R
CN1962

2291R
1291R

5
3391R

7291C

4291C
8391R IC1889
1291C

1 9991C
6491R 6891R
6891C 8891C

D
4991R

5991R

6891CI
7591C

7891C
1591C

5091R

1491CI
34 18
8091R

34 18 6391R
3391C
3591C

0291C 7391R 9391R


6091R 7091R 1391D IC1941
2591R

2891C
2591C

1 17
1 17
6591C
9891C

9491C
5491R

4591C
Q1941
3491R

Q1942
4891C

3891C

1491Q
8891R

4491R
2491Q 5891R E
5891C

(ANP7425-A)

G
XV-EV51 53
5 6 7 8
4 3 2 1
XV-EV51 54
B
CN1901 CN2506 MECHA. CN5101 CN201
CN8751 CN8101
G E DECK J C C A
F
(XNP3060-D)
CN5903 CN5801 CN5802 CN5509 CN5504 CN5505 CN5701
C D
123.0

17

C5803 A For Binder


17

C5709 IC5801
IC5801

DISP FFC
W201
W202

11 11 CN5509 1 1 X5701
W205
SIDE

17.RECL C5804
W203
W204

W219
W218
CONTACT

KN5502 16.PBL W206


W207

15.GNDA
IC5701
14.PBR
10
IC5701

W217

W216

CN5903 VA+12V
1
13 1

13.RECR W221
W225 CONTACT
W212

12.XPBMUTE
W211

CN5801
W208
W209
W210

W222 SIDE
30

11.DOLBY ON/OFF
W227 R5802
10.RECMUTE Q5805
Q5805
C5713
9.PB/XREC W223 W226
CN5701

8.XBEATCUT
7.BIAS L5701
1

Q5802 R5712
1

Q5802
R5807
W215

6.GNDD
10

W214

DECK FFC
1

5.VA+12V W224 W230


GNDM
2SD2012

C5806 R5804
GNDU
E

4.VA+12V CN5802
W233
13

OPEN

W220 W228 W229


W232
W231

3.MS
2.VB+12V 10
1

VD+5V
E
W237
CDL

1.GNDB W242
GNDA

W234
W213
CDR

CONTACT W253
W235

W259 R5913
W236
DSPMUTE

11 1
C5953

SIDE 11 1
GNDA

Q5806
VD+5V VM+12V C5701
Q5806
SIDE

W480 W260
PRINTED

W244
GNDD
C5805
B
W250
W263

VA+12V
W262

J1
W241
W481
C5956

Q5701
W261 Q5701
W482

W243
W252
W254
W256
W257
W281

1
W251
W258

W255

W239 D5703
C5959

W249

C5702
W248

30
C5955

SIDE
W277

W265 W238 W286


SYSDOUT
W245
W246

SYSDIN

CONTACT
SYSCLK
W278

Q5955
Q5955
W247
W279

V+8V
W280
W266 TEST W287
C5958

VE+5V

VUN+5VM
CN5505

W276

W284 D5701
W271
VDET
W275

W267
17

W288
W273
W272

VUN+5V
17

W282
W269 W289
VM+12V W285
KEY3

KEY1
KEY2

W264
Q5951
Q5951 W268 W290
VUN+12V
ST/TUNE

SERVICE
W270 W274
Q5952 W295
Q5952
GNDD
W283

7.NC
W291
C5951
X5501

6.GNDU
5.VE+56
W299

D
V+5BU
W300

4.XRESET
W292
GNDU
W495

2.FLASH DO
1.FLASH E/D IC5501
3.FLASH CLK
1
1

15.C

R5953
IC5501

14.GNDA
W293
1

D5953 13.SW
OPEN

R5957
W294
D5951 12.GNDA W304 VA+12V
W301

W296
W298
GNDU

W297
15 15

7 CN5502
7 1 1
14

R5954 11.LS W305 VM+12V


10.GNDA
W308 9.RS
W309 8.GNDA

W313

W311
7.FL 21.ECHOVOL
CN5508
OPEN

W306 VD+5V 6.GNDA 20.LEVELIN


VE+5V
W302

CONTACT
W490

4.GNDA 19.KEYSTB
C5504
W489

CMKS-P3X

SIDE 18.KEYSCK
2121

5.FR
3.RECL 17.KEYSDATA

D5507
D5506
1.XCDRST 2.GNDA
W493

IF ASSY

J2
2.SEL1 W314 D5503
W338

D5504 1.RECR 16.VOCALC


1
1

3.SEL2
W337
W488

L5501 15.VOCALB
4.SCLK W312 14.VOCALA
C5507
W315 13.ASSELB

C5510
5.SMDATA
W334

D5509 W339 12.ASSELA


6.MSDATA
W318
OPEN
W333

W484
W316
W317

7.ACK W321 R5601 11.CDL


D5505 W340
W336

10.GNDA
W335

C5502

W494
W332

8.MUTE 9.CDR
CN5504

11

R5606 W341
D5508 8.GNDA
VA+12TX

VE+5V

W485
11

9.GNDD W320 C5508 7.RECR


- +
W342
W330
6.PBR

W325
W326
W327
W328
W329
10.NC W323
DVDCS
11.VDET 5.GNDA

C5528
11.A/D MODE
IN OUT C5718

1
W343

CN5901
4.PBL
C
12.GNDD D5502 D5501
CN5506

10.CSRST
13.NC IC5507 3.RECL
IC5507

16
9.CDCS W344 2.
1

14.NC NJM7805FA 8.CDPDN


15.NC AUXMUTE
1

7.GNDD
W345

EXPCS
16.VUN+5V PRINTED SIDE C5501 W324 6.NC 1.

VE+56
17.VUN+5V ATTCONT

C5526
1

GNDU
1

W331 5.NC

GNDU
5 CH

18.VUN+5VM W356 4.NC

W491
W479
W478

19.VUN+5VM VA+12V

W352
3.NC
OPEN

W353

W382
W381
W380
20.GNDD(M) C5717

W322
W350
J4
W357

W351
2.RX1 OPEN

W384

W349
21.GNDD(M) 1.GNDD
CN5510

22.GNDD W358

AC
DSPMUTEOUT

W355
23.GNDD 21.DSPMUTEOUT
W367

W348

1
17

2121

W354
1
1

24.SPDIF 20.XDSPMUTEIN
W359 W360 W366
17

19.CA18
25.GNDD

16
18.CSDI
26.VUN+12V W361 W364

W347
IC5591
27.GNDA

IC5591
(1 RED,2 BLACK)

PRINTED W369

SPDIF
GNDD

28.CDL W362 W365


SIDE

SPCONT

D5511
PROTECT
EVOLCLK
OUT NJM78M56FA W368

W498
W346 29.GNDA W363

W378
DSPOUT
17.CA19
IN

EVOLDATA
30.CDR

SIDE
EVOLCS
16.NC

CONTACT
15.CSCS
W390
IC5508

W500
CN5503
14.CSDO

5.FLP
18.AC
DSPCLK

4.FLN
3.FRP
IC5508

C5904
2.FRN
13.CSREQ

1.KEY4
6.GNDA
W395

W375
16.GNDD
17.GNDD
12.CA17

15.GNDM

7.SPCON
20.UN+56

12.VU+5V
13.VU+5V

W372
CN5507

W370
W373
19.VA-12V

C5902

W379
14.VU+12V
11.CA16

8.EVOL-CLK
10.EVOL-CE
W388

11.PROTECT
W499

9.EVOL-DATA
W385 10.CA15
1
GNDD 9.CSCLK

W374
8.FS96
W389

W376
W377
GNDM

R5914

C5531
C5530
7.CDDO

W371
GNDM
W393
A

11
JA5903 KEY4 W387 6.ABOOT
GNDD 5.CDERR

J3
VE+56
B
W386 W486
W397 4.VD+5V

W383
W396
VU+12V 3.VD+5V
CN5501

W497

OPEN
1 2.GNDD W483

7.NC
W496
CN5902 1 1.GNDD

1.TXD
3.RTS
4.CTS

2.RXD
5.V+5D
W399

6.GNDD
20 GNDM

KN5501
1 7

GNDV
GNDC
W400

UN+56
CONTACT 1 7 20 GNDA KN5503
B UPPER SIDE CN5510
CN5901 CN5503 CN5506 CN5507 CN5508 CN5501
To FAN
Power amplfier K C CN8901
G To M-EV51 or M-EV21 CN8001
CN1902 K K
CN8003 CN8002 IF ASSY B
A
SIDE A
4.5 IF ASSY
4 3 2 1
5 6 7 8

SIDE B A

B IF ASSY

CN5501 CN5507 CN5503


C5614 C5615

3695C
1195R 12.CA17
1 7 7095C 1.GNDD GNDA
13.CSREQ
5095C 2.GNDD
14.CSDO
3.VD+5V

2095L
9095R 20 4.VD+5V 15.CSCS C5616
5.CDERR 16.NC
0195R 17.CA19 GNDM

CN5902
6.ABOOT
8095R 18.CSDI
2195R 7.CDDO

Y
19.CA18

C
6095R 1 8.FS96
20.XDSPMUTEIN
1.VE+56
CN5501 9.CSCLK 2.GNDD

9065C
2695C
VU+12V 3.VA-12V
1.KEY4 8.EVOL-CLK 10.CA15 4.GNDD
11.CA16 21.DSPMUTEOUT
B
2.FRN 9.EVOL-DATA GNDD 5.VU+12V

6095C
VE+56

15.GNDA
1
3.FRP 0185C 6.GNDA
4.FLN
5.FLP GNDM 7.
10.EVOL-CE

1
1095R
GNDA

16.TXL
6.GNDA

CN5503
11.PROTECT
1095C 7.SPCON
12.VU+5V GNDD 8.FLN
3095R 3095L 7065D 8065D
9.FLP

CN5507
4095R

19.VA-12V
7095R 3095C

20.UN+56
10.FRN
7065C

17.MUTE
0165D

OUT
13.VU+5V
14.VU+12V
15.GNDM
16.GNDD
5095R

17.GNDD
18.AC
1255C 11.FRP

IN
12. VA+12V
1955CI

B
9055C 13.VA+12TX
IC5591

C
1165D 14.TXR

E
2065D 1065D

3155D
4155D
0165C

8
2155D
1065C 2065C
1165C

9065D
4065C

IC5508
9

8
3065C
IC5508

CN5501
4065D

1955C
16.NC
3065D

GNDD

7055Q
6065D
15.GND
6065C 5065D
Q5507

CN5501
14.NC 6955C 8065C 5065C

XWZ3627
XWZ3624
XWZ3617
4695R
IF ASSY

13.GND

17
12.NC
16

4595D

6611

11
GNDU
5165R

3355C
11.GND
3695R
Q5512

21
1695C 5695R

4955R
10.S-Y 2955C 2155Q
6695R
CN5901

9.GND 7065R
9055Q 1.ATTCONT
Q5509
5255C

2065R 5955C

1
8.V 1955R 2.AUXMUTE

0155D

16.VOCALC
1.GNDD 3.RECL 4.PBL
CN5901

7.GND GNDU
2.RX1 5.GNDA
9655R
6.S-C
5.GND
30.CDR
8065R
9255C
5055Q 8655R 8055Q
3-6.NC Q5529 Q5508
Q5505
6.PBR
29.GNDA
7.GNDD

1
4.CTS
8.CDPDN

CN5506
28.CDL

CN5504

13.ASSELB

17.KEYSDATA
7.RECR
3.RTS 27.GNDA
6655R

0695C
7655R
2.RXD 26.VUN+12V
6955R

9955R
5655R
1

IN

OUT

8.GNDA
C
25.GNDD
1.TXD
24.SPDIF
IC5507
7955R 4655R 9.CDCS
IC5507
3655R
6055Q

CN5504
23.GNDD
7255C 8955R 9.CDR
2655R
Q5506

11

14.VOCALA
22.GNDD

VA+12TX

18.KEYSCK
10.GNDA
21.GNDD(M) 1055R 10.CSRST
3055C 6555R 11.A/D MODE
10.NC
5055R 11.CDL
20.GNDD(M)
13.SW

CN5508
9.GNDD

15.VOCALB
19.VUN+5VM
8.MUTE
18.VUN+5VM 14.GNDA 12.ASSELA
15.C

1
7.ACK
1155C 1.RECR

21.ECHOVOL

20.LEVELIN
19.KEYSTB
17.VUN+5V
4055R

6.MSDATA 2255C
16.VUN+5V 2.GNDA
3055R

5.SMDATA 8265R
15.NC 8.GNDA 3.RECL

2355C
4.SCLK 14.NC
8055R 9.RS 5.FR Q5502
2055Q

3.SEL2 13.NC
6055C 10.GNDA 4.GNDA
2.SEL1 12.GNDD
7855R 11.LS 6.GNDA
1855R

2155C 3165R

21
1.XCDRST 11.VDET 12.GNDA 7.FL
5055C

Q5501

1165R
1655R 9555R 0955R
1055Q

0855R

3755R 0655R 8555R


GNDU

0755R CN5502
CN5502

7555R
18

5755R 1755R
08
08
18

2165R
6755R 2755R 5555R 4555R 3555R IC5501

I
C
55
5065R 4755R 7455R 2555R 2955R

10

1155Q
8755R 7755R 1555R 0555R 8855R
6055R 9755R Q5511

0155Q
15
7055R 2055R 7 1 VM+12V
1

Q5510
00

9055R 0155R 0255C VA+12V


1155R 2155R

CMKS-P3X
3595Q Q5953
00

4165R

CN5505
1

8455R

2165C
3165C
3155C

1
151
6455R 9455R
11

Q5954

9065R
4595Q 9855R

0165R
D
05 0
4155C

1.SWFMIX
1595R
5595R

2.DTSDMIX
GNDD 3955R 4455R 0065R

CN5505
3.RECR 4.GNDA
2595R 3455R 5455R
9155C 5.RECL 6.GNDA
6595R

VUN+12V 0455R 2455R 7.FR 8.GNDA


3955C

9355R 1455R
13
033

13

9.FL 10.GNDA
0

Q5952 7355R 8355R 11.RS 12.GNDA Q5952


Q5951
VM+12V
13.LS 14.GNDA Q5951
VUN+5V
1265R 6855R 15.SW 16.GNDA
8155C 3855R
6255R 17.C
VUN+5VM
6155C 5855R 5255R 1075R

17
2855R 2CH DVD
7155C 4855R 5155C
0365R 3155R 1255R 8255R
1355R 3065R
4155R 7255R

CDR
4955C 9255R
Q5955

2075R
4595C 9265R 7155R 4255R 4065R
8595R 1.GNDB
0255R 1.NC
2.RDS Q5955
6155R 5355R 6355R 3.V+10
7595C

2.VB+12V
Q5701
VE+5V

Q5701
3355R 4355R
10.MOTOR

8155R 4.TUNE
1365R

11.RECR

8.VD+5V

2355R

CDL
2595D 9155R
5.ST/TUNE
30

4.PULSE

3.MS
7085C 0355R
4185R

4.VA+12V 6.TXMUTE
5.VA+12V 5CH DVD 5075R 7.TXL
6185R

2255R
9085C

2595C 8.GNDTX
6.GNDD 7.BIAS 1085D 9.TXR
3255R
9.RECF

0185R
7.GNDM
6.MODE
5.HALF

8.XBEATCUT
2.SOL 3.NC

3075C
B

VD+5V
CN5903

10.TXODATA
GNDA

9.PB/XREC 11 1
4075R 11.TXCLK
Q5806

1.GNDM

7075R
GNDD

12.TXIDATA
10.RECMUTE
5185R 3185R
6075R 8075R 13.TXCE Q5806
3075R

CN5802
E
TXR

5085R
10 4085Q Q5804
1
E

TXL
1085Q

11.DOLBY ON/OFF
9085R

Q5801
GNDM

CN5701
12.XPBMUTE 3085Q GNDU
Q5803
3085R
1

1085C 6085R
1085R
6175C
CN5903

CN5701

2085C
4175C
Q5805

13.RECR Q5802
2175C Q5802 Q5805
16

14.PBR
8 8
61
1
2695R

5175C
1
7085Q

15.GNDA
8075C Q5807
1

1185R

13

16.PBL VA+12V CN5509


17.RECL 10
8085C

1175R
GNDA

11
1
CN5801

RECR
8
8

99

6611

11
11.GNDD
10.GNDD
9.VA+12V
8.REMOCON
7.KEY1
6.KEY2

4.LCDDATA
3.LCDCLK
2.VE+5V
1.GNDU

8085Q 1175C 0175C 1075CI IC5701 Q5808


5.KEY3

3175R 0175R
1085CI 2185R
9075R 6075C
Q5801
17

RECL
5075C 4175R

CN5801 CN5802 CN5509


(XNP3060-D)
F

B
XV-EV51 55
5 6 7 8
4 3 2 1
XV-EV51 56
C
M J5401 F
(XNP3060-C)
CN8301
C8601
C8701
C8702
FC

IC8601
ICT
IC8601
IC8701

C8614
IC8701
C8613
W120 C8602 W176
C8713
IC8703
B
IC8703
W159

C8625 C8714
For Binder W177
W116

W121

W160
IC8702
W161
E
IC8702

IC8602
R8724

IC8602
IC8603

C8622
W487

W117

4 1
W162
C8620
IC8603
C8626
W492
C8751

4 1
W178
W179

W163 CN8301 C8752


W139
PRODUCTION CODE
W119

W140 IC8751
IC8751

W141
W122
W123

1 C
2 GNDA W142
R8625

3 SW
SIDE
R8626

4 GNDA W164
CONTACT

W143
W125

5 LS
W124

6 GNDA
7 RS W144 C8762
8 GNDA
CMKS-P3X

C8829
IC8753
9 FL
IC8753

W145
1 1

10 GNDA C8831
11 FR
12 GNDA
IC8801

IC8801
13 ANAL
14 GNDA
15 ANAR W126 W166 V+12V
16 DTSMIX
CN5505
17 SWFMIX C8761
W167 V-12V
W165

W103
W104 W146
W181

W101 C8312
W105
D
B
W147
IC8752

CN8751
W102 IC8752
W106 C8823
C8201

CN8751
W127
W180
W184

W148

17 17
C8833 C8789
W182
W183

C8308
W128

C8305

W107
W168
C8834
W185

IC8301
C8309
W186

C8307 C8310
IC8301

SIDE
CONTACT
W129 W169
W149
V+12V
V-12V

W108
W130

1 1
C8118
C8119

C8117

C8120
IC8201
W150
C8826
IC8201

W131
IC8111 C8822
AF ASSY

W151
CN5504
IC8111
1 ECHOLVOL

CN8101
W109 2 LEVELIN 11 CDL
3 KEYSTB 12 GNDA C8221 C8213

B IC8101
W110 4 KEYSCK 13 CDR
C
5 KEYSDATA 14 GNDA

CN8101
W111 6 VOCALC 15 RECR Q8201
Q8201

IC8101
7 VOCALB D8201 C8222
16 PBR
8 VOCALA
9 ASSELB 17 GNDA

IC8802
IC8802
18 PBL

21 21
W112 10 ASSELA R8216
C8907 19 RECL C8905
C8908 20 AUXMUTE
W113 W170

W132
W152

D8901
21 ATTNCONT

SIDE
W187
W114 R8814 L8201

CONTACT
D8902

IC8803

C8509
IC8803
1 GNDTX

1 1
2 TXL R8901 R8904
3 GNDTX

IC8901

C8902
SIDE

C8510
4 TXR
NJM7812
5 VA+12TX
PRINTED IC8901
6 VA+12V
W171

W138
W136
W155
7 FRP
W172

W137
CN5503
8 FRN

C8113

W133
9 FLP W173
10 FLN

W157
11 GNDA

W135
W153

W134
W156
12 GNDA

W158
W154
W174

B
13 VU+12V C8906
14 GNDD
15 VA-12V W175 W189

CN8901
16 GNDD
17 VE+56
W190

17 17
B

CP
CN

SLP
SLN

SRN

SRP
C8111

SWP
SWN

CN8901
JA8401
10 9 2

CN8701
7 5 3 1
CN8701
(M-EV51 CN-3002)
AF ASSY C
TO. STEREO POWER AMPLIFIER
A
SIDE A
4.6 AF ASSY
4 3 2 1
5 6 7 8

SIDE B A

C AF ASSY
CN8701
C8404 R8411 C8407 C8401 3158C 8158C C8785
C8516 C8517

2378C
4378C
1378C
3378C

0878C
2878C
1878C
3878C
C8402 R8516 R8515 C8514

7158R
8
R8402
D8710
4878C D8761
C8735

3048Q
D8759
R8404
C8406 Q8403

2158R
R8406 D8712 D8755

3058Q
L8701 1
R8408
CN8701 Q8503

VE+56
Q8502

4158R
Q8402

GNDD

2058Q
Q8401 Q8402 Q8501
R8401

1048D
R8410
D8705
Q8401 B

1058Q
17
FOR R8403 D8707

GNDA(AUXIN)
17 VE+56 SERVICE C8403
16 GNDD C8736 C8730

5158C
R8405

2088D
CN8901
15 VA-12V R8513 D8706

AUXMUTE

ATTNCONT
C8405 D8711

AUXINL
D8756 D8762

4098C
7278C
14 GNDD R8511
D8709

GNDA
R8407

AUXOUTR
AUXOUTL
R8518 D8758 D8760

TXR
13 VU+12V R8519 C8728 C8729

GNDTX
R8409

GNDA
D8708

VA-12V
12 GNDA

VU+12V
11 GNDA D8757
10 FLN C8778
C8776 C8779

TXL
9 FLP VA+12V C8775

AUXINR

VA+12V
8 FRN

TXR
7 FRP VA-12V

IN
6 VA+12V R8815

PBL
1018R
5 VA+12TX
IC8901

AUXINL
CDL
C8811

3088CI
4 TXR

IC8901
3098C
3 GNDTX
2 TXL C8813
1 GNDTX IC8803

8
R8811

1
R8813
C8807

CN8901
RECL

OUT
C8809
Q8101 R8812 Q8101
Q8102 R8810

AF ASSY
4

5
C8810 VA-12V Q8102

PBR
R8808
C8808

9088R
PBR RECR
R8102 C8812 IC8802

8
C8103 C8101
CN8101
IC8101

2088CI
21

8
21.ATTNCONT

5128R
20.AUXMUTE
Q8201

Q8201
1018CI

5
R8103

CDR
GNDA
C8105 C8806
CN8101

R8107
C8220 C8212
GNDA C8223
C

11
6611
R8209
IC8111 R8208 R8214

51

41
R8104

51

41
FADEROL

5 5

44
C8211
C8106
R8213
R8217
C8206 R8212
IC8111 IC8201

8
R8108

11
FADEROR
R8112 C8108 R8204 C8210
R8111

7018C
20
19RECL
18PBL C8209
R8105
17GNDA R8106 FADEROL C8208
16PBR C8203
1

15RECR
GNDA C8207

82
82
14GNDA

1
1
13CDR C8205
12 GNDA R8303 C8306
4038C

11 CDL
10 ASSELA IC8301
9.ASSELB R8203
9

8 C8204
8.VOCALA IC8201 R8773
C8311 R8202
7.VOCALB R8769
R8308 R8767
2038R

6.VOCALC
C8769
IC8301
5.KEYSDATA
4.KEYSCK R8201 R8211
3.KEYSTB C8303 R8210
2.LEVELIN C8219 CMKS-P3X
C8202 Q3010
6611

C8302

3778C
R8207
1.ECHOLVOL
1

LEVELIN C8218
17

C8301
R8301 R8304
R8205 C8771 Q3009
DSPINR LPFOR C8217
C8315 C8788
R8206 Q4002

8
CN8751

1
GNDA GNDA C8216
R8305
DSPINL LPFOL
R8312 C8215
C8214 R8771
Q301
C8313
D

5
R8802 R8801 C8830 IC8752
C8824
R8803 C8803

7678C
R8306 R8768 C8772
CN8751

6138C
11

R8307
8
1088CI

C8774
R8774
IC8801
6188R

KEYSDATA R8777
1

R8772 C8759
4

R8751
KEYSCK R8770 IC8753
1

C8753
4678C
7288C

17 SWFMIX C8768 C8770 R8759


KEYSTB
4

3678C
16 DTSMIX
15 ANAR C8828 IC8753
14 GNDA
GNDA R8778
13 ANAL
C8628 R8758
DSPINL

ECHVOL
1.ECHOVOL
4.GNDA
3.MIC
2.VA+12V

12 GNDA
1

8
R8624
C8760
11 FR
R8622 IC8751
LFE

10 GNDA LFE
9 FL IC8751
7168C

C8618
2068D

8 GNDA
C8758
7 RS R8614
1268R
1168R

R8754 R8779
7268C

6 GNDA R8623 R8612


5 LS C8756 R8753
7578C

R8752 R8757
C8754
4 GNDA
R8781
R8613
3 SW
CN8301 C8755
SW
4268C

2 GNDA
C8621
1 C
R8719
C

C8619 C8719 C8725 C8723


4 1 R8723
8

7
1

C8786 C8519 R8721


R8729
1

8
2068CI

2078CI

C8737 C8724
R8722 IC8602 IC8702
4

R8728
E
3068CI

C8722
C8726
41

R8726
R8718
4

R8727 C8721
IC8603 IC8703
8
1

C8623 R8717
XWZ3618
XWZ3625
XWZ3628

D8601
8578Q

1478R

R8743
6178C
6168C

IC8703
4

C8615
C8715
Q8758
FR

Q8754
1

8
4578Q

8
1

C8710
R8704 Q8759 IC8701
9578Q

R8720 IC8701
4

C8707 Q8753
4

RS

C8720
C8610 R8606 R8702
IC8601 R8745
C8704 C8709 IC8601
3578Q

R8605 C8609 C8608 R8608 C8708 R8742 R8707


R8748 R8703
R8603 R8607 C8606 R8604 R8746 C8705 R8701
LS

R8744
C8605 C8607 C8604 R8602 C8706 C8703 R8747
FL

R8601 C8603 R8708

(XNP3060-C)

C
XV-EV51 57
5 6 7 8
F
E
B
A

D
C

58
E
SIDE A

1
1

DECK MECHA
4.7 DECK ASSY

DECK ASSY

CN2302
BIG

2
2

DECK TP DECK ASSY CMKS-P3X BIAS Adj.


REC LEVEL Adj. C2405 C2421
3 1 A
C2209 W263 1 2
R L DI P OPEN
3

1
1 C2217 Lch 1 2

2
CN2507 C2403 L2401
C2407

L2403

VREF
C2207

4
C2203
CN2302

VA12

3
W259 C2417

SIDE
C2409 C2810

F2201
W261 VA12

VR2401
IC2401

PRINTED
C2419 C2808

C2205

W253
Lch

C2215
RCH LCH W260 VREF

W247
W248

W246
1
L2402

W249
Q2806
IC2201

5
C2218

2
C2420 C2809
C2425

4
W254
W255
W256
W257

VREF
VREF
C2410

3
W250
VR2801

W258

F2202
PRINTED
SIDE
C2418

VR2402
W242 W262

W252 GNDA
W234
C2210 W237 C2422

W251
C2262 Rch 6 4
W243

W241

C2251
GNDA
C2408
D2303

C2404

C2204

XV-EV51
C2406
L2801

IC2202 BIG Lch GNDA


VR2802

L2404

VA12
D2305

C2201
C2311
OPEN

D2256 Rch 1 3

C2208
C2261 W236 C2307
4

C2309 PRINTED SIDE

D2201
VR2301
D2301

GNDA

C2206

C2216
Q2301

W240

MS
W235 VA12
C2255

VA12
VREF
Q2802

W233
C2804
C2805

W238
W239

C2254
W244
1

R2321
C2314

C2801
Q2302
1

W224

IC2301

W231
W221

VA12

GNDA
W232
D2302

W230
D2304

CN2301

W227

W219
GNDA
C2308 D2306

W220

GNDA
W218
ICT FC
C2202
C2310
C2806

3
3

W223
VR2302

C2312
C2802

C2807

W228
Q2801

C2803
Q2805

Rch

XNP3061-A
W222
CN2506

PBL
PBR
RECR
17 1
1 17

W225
W229
Q2803

MS
VB+12

XPBMUTE
DOL ON\OFF
PB/XREC
XBEATCUT
BIAS
DGND
VA+12

17.RECL
15.GNDA
R2805
R2806
R2803
L2802

1.GNDB

10.RECMUTE
5.VA+12
CONTACT SIDE PB LEVEL Adj. Production Code

CN2506 CN2301
IC2202 IC2201 VR2401 IC2401 Q2301 VR2801 Q2806
IC2301 VR2802
VR2402 Q2805 Q2302
VR2301 Q2803 Q2802
VR2302 Q2801

(XNP3061-A)
B CN5801 DECK MECHA

4
4
5 6 7 8

SIDE B A

BIG

5182R
L2801
R2898

Q2806
Q2806
R2801 R2802

VR2802
L2802

CN2302
6182R

VR2801

BIAS
Q2801 Q2802

VR2801
VR2801
Q2801
Q2802

CN2302
B

3182R
R2814

Adj.
VREF
D2303

D2302
D2304 R2424 R2899
R9005

CN2301

3242R
CN2301
D2301

L
R

1032R

3242C
4242C
1

6242R

5242R
2032C

L2402

L2401
Q2803 Q2804 Q2805
C2301
Q2803

VREF
Q2301
Q2302
Q2455

2032R
Q2456
R2456 R2455

5542Q
6542Q
D2305
E

C2401

8082R 7082R
Q2804
R2432 R2431
Q2302

D2306

9932R
Q2301
C2432

8
1

3142R
IC2401

4142R
Q2303
Q2304

1042CI
4032Q

3032Q
R2412

5
2042C
1182R

4
Q2805 7032D
R2303

1342C
1142R
C2303
R2418

3 2 1 0
R2410 R2409

9082R

0
0
R2810 C2315 R2416 R2417
R2304

L2403

1
1
L2404

9142R
C2322 C2304

1232C

9 8 7 6 5 4 3 2 1 0
R2415
C2324
C
XNP3061-A

9942R
0242R
IC2201 Q2306

4
6032R
R2305
R2307
R2309

8942R
2132R

1542R
2542R
R2308

1
1
1032CI
8
2242R
Q2401
Q2302

R2421
R2310

5032Q
2042Q
Q2305

3232C

1042Q
1132R

C
B
A
Q2306 C2451
1042D

GNDA

REC LEVEL
1542Q
2542Q

VA12
8032D
Q2451
Q2452 Q2351 Q2353 Q2352

VREF
VA12

3042R

VREF
R2404

VR2401
R2352

L
R2320
1532Q

R2319

VR2402
PB LEVEL Adj.
VR2401
VR2402

1042R

1142C
Adj.
VR2301

C2412
VR2302
VR2301

3532Q

2042R
BIG
R

VA12

TP1 CMKS-P3X
TP2
VREF

R9008
GNDA

VR2302

3122R
2532Q

C2452
R2453
R2351 D
GNDA
VA12
3542Q
Q2460
Q2453

XWX3067
XWX3066

0642Q

8
9

8
4542Q

1022CI
IC2201
Q2454

1.GNDB 1122R C2230


2.VB+12
3.MS
0122R

4.VA+12 GNDA
1

GNDA
61

5.VA+12
61

6.DGND
5522Q
Q2252

1322C

7.BIAS D2201 VREF


1922R
4522Q
Q2254

C2212 C2211
6722R
8.XBEATCUT
9.PB/XREC 7722R Q2253
Q2253

10.RMUTE MS
11.DOL ON C2252
12.XPBMUTE R2254
1522Q

R2253
13.RECR
14.PBR
Q2251
Q2252

D2256

15.GNDA R2251
R2272 R2255
16.PBL
2522D

VA12
17.RECL R2252
2522Q
3722R

6522R
0722R

D2255
6009R

R2206
4022R

C2253 E
8022R
7022R

R2268 R2257 R2203


C2256
1

R2269
C2257 R2265
IC2202

4
CN2506

F2201
2022CI

F2202

1022R

GNDA
6622R
CN2506

1722R
7622R
3822R

R2260 R2259
5022R
L1

GNDA R2275
CN2507

D2253 D2254
1622R
Q2201

Q2261 R2274
Q2263

VREF
Q2262

3
17

3622R
R
2022R
3622Q

4612R
4622R
3612R

R2281
2622R

Q2262
2822R

(XNP3061-A)

E
XV-EV51 59
5 6 7 8
1 2 3 4

4.8 DISP1, DISP2, DISP3 and LED ASSYS

SIDE A
A B CN5509
J CN5101

1
5101
W462

DISP1 ASSY CONTACT ON CN5101

W463
UPPER SIDE
1 11
11 1 5.LCDDATA
4.LCDCLK
C5103 3.VCC
1.GNDU 2.GNDU
2.VE+5 1.VLCD
W464
3.LCDCLK
4.LCDDATA
5.KEY 3

W471

W465
6.KEY 2

L5101
7.KEY 1
8.REMIN
9.VA+12

5
10.GNDD R5106

5
11.GNDC

W472
D5101
W466

V5101

C5108
CMKS-P3X
B

1
S5101
S5106
DISPLAY1 ASSY

SOUND
MODE

2CH VIRTUAL S5102


SURROUND
5CH S5105
KARAOKE

D5103 S5103
ST MEMORY
D5102

5.VA+12V S5104
4.KEY 3 ENTER
W467

3.KEY 2
2.GNDU
1.GNDD
W473

W474
C 5 1CN5102

1 5
OPEN D5105
W468
D5108 D5107

(XNP3060-C)

I
DISP2 ASSY J5102 5 1
D5201
W475

R5211

1
D5204

5
D5108 D5107 D5202
MANUAL SOLDER MANUAL SOLDER

D
1

S5202 S5206 S5208


1

VOL +
5.VA+12V

VOL - TAPE
2.GNDU
1.GNDD
4.KEY 3
3.KEY 2
J5202

DVD/CD |<</<< >>/>> |


1.WHITE

3
2.GRAY

S5204 TUNNING - TUNNING +


S5201 S5205
S5203 S5207

L 1
J5203
S5211 1.GNDU
2.KEY 5
PLAY/PAUSE

S5210
STOP

LED ASSY 3.GNDU


OPEN/CLOSE
W458

D5203 OPEN
MANUAL SOLDER TUNER
CMKS-P3X S5209
LINE
XWZ3622 LED ASSY DISPLAY2 ASSY
CN5203

1 2
1.WHITE
2.GRAY
D5203

1 2
(XNP3060-C)
E (XNP3060-C)

DISPLAY3 ASSY
S5302 S5303
1.GNDU
DOBLY NR CMKS-P3X REVERSE
2.KEY 5 (DEMO) MODE
3.GNDU
1
1

S5301 S5304
ASSES REC/STOP
J5202
3

H DISP3 ASSY

(XNP3060-C)
F

H I J L
60 XV-EV51
1 2 3 4
5 6 7 8

SIDE B A

J DISP1 ASSY
CN5101

5345C
11 CN5101 1

4015C

2015C
9015R
5015C
A

6015C
1.VLCD
2.GNDU

9.VA+12
8.REMIN

6.KEY 2
5.KEY 3
4.LCDDATA
3.LCDCLK
2.VE+5
1.GNDU
11.GNDC
10.GNDD

7.KEY 1
3.VCC
4.LCDCLK
5.LCDDATA

1115R
5
7015C

1115C

V5101
C B
DISPLAY1 ASSY

0115R
9015C
0115C
1
XWZ3619

5.VA+12V
4.KEY 2
1.GNDD
2.GNDU
3.KEY 3
TIMER/CLOCK ADJ

1015R
CMKS-P3X S5101
S5106
SOUND MODE

S5102

2015R
5CH:KARAOKE

5015R
S5105
DISPLAY 2CH:VIRTUAL SURROUND

4015R
S5103

3015R
S5104 ST MEMORY
ENTER
Q5101
D

7015R

1015Q
C

1015C
6015D

8015R
1 5

B CN5102

CN5102 (XNP3060-C)

I DISP2 ASSY J5102


1 5

1.GNDD
2.GNDU
3.KEY2
4.KEY3
5.VA+12V
J5102

VOL +

4025R
D

1
S5206
7025R

S5208 S5204
1025Q

J5202
2025R

DVD/CD

J5202
Q5201 TAPE VOL -
1025C

3
R5206 S5202
3025R 1.GNDU
2125R

2.KEY 5
S5207 S5205 S5201 3.GNDU
1025R

S5203
5025R

STOP |<</<< TUNNING -

1
PLAY/PAUSE
>>/>>|tunning +
6025D

J5203

S5210
L
8025R

LINE
S5209 S5211

0125R
9025R
4125R

OPEN/CLOSE
3125R

TUNER
LED ASSY
7025D

DISPLAY2 ASSY

CN5203
CMKS-P3X
CMKS-P3X
XWZ3620

5025D

ASSY
LED
1 XWZ3622
(XNP3060-C)
(XNP3060-C)
E
DISPLAY3 ASSY
XWZ3621
2035R

S5303 DOBLY NR(DEMO)

REVERSE MODE S5302


J5202
3035R

1.GNDU
S5304 ASSES
1035R

2.KEY 5
1

3.GNDU
S5301
J5202
3

REC/STOP

H DISP3ASSY CMKS-P3X

(XNP3060-C)
F

H I J L
XV-EV51 61
5 6 7 8
1 2 3 4

4.9 MIC ASSY

A SIDE A SIDE A

M MIC ASSY

C CN8301 VR5401
C5431

1
B

C5421
C5410

W454
W459
J5401

W453
C5416
2
C5433
W476
1
IC5402
1

W477
R5413
1.ECHOVOL
W457 JA5401
J5401

C5409
2.VA+12V W452

C5422
3.MIC

C5432

C5413
4

4.GNDA 1
R5401
4

W469
5 MIC ASSY

W460
R5411
L5401

C5420
W470 3

C5401
Q5402
IC5401 W456
D5401
C5426
CMKS-P3X JA5402
KN5401

W461
4
5

C
(XNP3060-C)
Q5402 IC5401 IC5402

SIDE B

D
3
9245C

0345C

9245R
2045C
3045C
5045C
4045C
3045R
6045C
4045R
5045R
6045R

5
4
7245C
6245R
5245R
CMKS-P3X

1
4245R
3245R
2245R

16
16 9
1045Q

3 2145R
2045R

4245C
1245R
1045CI

3245C
0245R

9145C
6345C
8145C
8245C

6145R

5
4
4 1
1345R

2045CI

4
4345R
3345R
J5401

11
4

8
5245C

1
2145C
9045R
8045R
8045C
2345R

0345R
7145R
7145C
1.ECHOVOL
1

5 8
7045R
2.VA+12V

4345C
4.GNDA

5145R

XWZ3626 3
4145R
4145C
J5401

1145C
7045C
3.MIC

8145R

5145C
9145R

XWZ3623 2
1
E MIC ASSY

(XNP3060-C)
Q5401 IC5401 IC5402

M M
62 XV-EV51
1 2 3 4
5 6 7 8

4.10 DSP ASSY(XV-EV51 Only)

SIDE A SIDE A A

K DSP ASSY(XV-EV51_Only)
B CN5507 B CN5506 B CN5508

CN8001 CN8002 CN8003

IC8201 Q8301 Q8201 IC8501 IC8101 IC8102 IC8301 IC8401


IC8204 IC8601 IC8021
Q8351 (ANP7442-B)

SIDE B

CN8001 CN8002 CN8003


IC8202 Q8353
(ANP7442-B)
IC8203

K K
XV-EV51 63
5 6 7 8
1 2 3 4

5. PCB PARTS LIST


NOTES: Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
A The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
When ordering resistors, first convert resistance values into code form as shown in the following examples.
Ex.1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J=5%,
and K=10%).
560 Ω 56 x 10 1 561 RD1/4PU 5 6 1 J
47k Ω 47 x 10 3 473 RD1/4PU 4 7 3 J
0.5 Ω R50 RN2H R 5 0 K
1Ω 1R0 RS1P 1 R 0 K
Ex.2 When there are 3 effective digits (such as in high precision metal film resistors).
5.62k Ω 562 x 10 1 5621 RN1/4PC 5 6 2 1 F

B Mark No. Description Part No. Mark No. Description Part No.
IC8101 CS493292
LIST OF ASSEMBLIES > IC8021 NJM2391DL1-25
XV-EV51/ZLXJ/NC > IC8011 NJM2391DL1-33
1..DSP ASSY AWX8059 IC8201 PD8104A

NSP 1..MEDIA ASSY XWM3206 IC8501 TC74LVX244FT


2..IF ASSY XWZ3617 IC8202, IC8203 TC74VHC574F
2..AF ASSY XWZ3618 IC8601 TC74VHCT08AFT
2..DISP 1 ASSY XWZ3619 IC8102 TC7WU04FU
2..DISP 2 ASSY XWZ3620 Q8351 RN2903
2..DISP 3 ASSY XWZ3621
2..LED ASSY XWZ3622 Q8301 UMD2N
C 2..MIC ASSY XWZ3626 Q8353 UN5212
D8301-D8304 1SS355
1..DECK ASSY XWZ3067 D8353 DAN202K
D8351, D8352 DAP202K
NSP 1..DVD ASSY AXA7110
2..DVD IF ASSY AWM7677
COILS AND FILTERS
2..DVDM ASSY AWM7684
L8011, L8102, L8201 Chip Inductor QTL1013
L8301, L8302, L8501, L8601 QTL1013
NSP 1..LOADING MECHANISM ASSY VWT1203
L8305 Chip Beads VTL1089
NSP 2..LOAB ASSY VWG2346

1..FM/AM TUNER MODULE AXQ7228 CAPACITORS


C8305, C8306 CCSRCH120J50
XV-EV21/ZLXJ/NC C8117 CCSRCH271J50
D
C8107, C8109, C8113, C8120, C8122 CCSRCH471J50
NSP 1..MEDIA ASSY XWM3208 C8205, C8206, C8209, C8210, C8308 CCSRCH471J50
2..IF ASSY XWZ3627 C8318, C8503, C8603 CCSRCH471J50
2..AF ASSY XWZ3628
2..DISP 1 ASSY XWZ3619 C8115, C8116 CCSRCH6R0D50
2..DISP 2 ASSY XWZ3620 C8302, C8501, C8601 CEAL100M16
2..DISP 3 ASSY XWZ3621 C8001, C8014, C8024, C8103, C8307 CEAL101M10
2..LED ASSY XWZ3622 C8316, C8323 CEAL101M10
2..MIC ASSY XWZ3623 C8320 CEAL220M6R3

1..DECK ASSY XWZ3066 C8123 CEAL2R2M50


C8011, C8021 CEAL4R7M16
NSP 1..DVD ASSY AXA7110 C8906 CKSRYB102K50
E
2..DVD IF ASSY AWM7677 C8102, C8106, C8108, C8114 CKSRYB103K50
2..DVDM ASSY AWM7684 C8118, C8119, C8121, C8124, C8202 CKSRYB103K50

NSP 1..LOADING MECHANISM ASSY VWT1203 C8204, C8207, C8208, C8211, C8309 CKSRYB103K50
NSP 2..LOAB ASSY VWG2346 C8317, C8324, C8502, C8602, C8920 CKSRYB103K50
C8319, C8329-C8332, C8903, C8907 CKSRYB104K25
1..FM/AM TUNER MODULE AXQ7228 C8911 CKSRYB104K25
C8301, C8304, C8321 CKSRYB473K25

RESISTORS
Mark No. Description Part No. R8313, R8501 RAB4C101J
R8312 RS1/16S1802F
F
K DSP Assy (EV51 Only) Other Resistors

OTHERS
RS1/16S###J

SEMICONDUCTORS CN8002 11P SOCKET AKP7069


IC8301 AK4586VQ CN8003 15P SOCKET AKP7071
64 XV-EV51
1 2 3 4
5 6 7 8

Mark No. Description Part No. Mark No. Description Part No.
CN8001 21P SOCKET AKP7074 X201 Crystal RES.(7.2MHz) ASS1093
X8301 CRYSTAL RES.(12.28MHz) ASS7046
8903 SCREW PLATE

KN8901, KN8902 EARTH METAL FIT.


VNE1948

VNF1084
B IF ASSY (XWZ3617) A

X8101 CRYSTAL RES.(27MHz) VSS1172 SEMICONDUCTORS


IC5591, IC5801 BU4094BCF

A FM/AM TUNER MODULE > IC5507


> IC5508
IC5501
NJM7805FA
NJM78M56FA
PDC093A
SEMICONDUCTORS Q5951, Q5801, Q5952 2SB1237X
IC201 BA1451F
IC202 LC72131MD Q5501, Q5953, Q5954 2SC2412K
Q201, Q204, Q205 2SC2412K Q5701 2SD1858X
Q202 DTA124ES Q5806 2SD2012
Q203 DTC124EK Q5803 DTA124EK B
Q5505, Q5509 DTA143EK
D201 1SS133
D202 MTZJ5.1C Q5506, Q5507, Q5508 DTC124EK
Q5502, Q5807, Q5808, Q5802, Q5805 DTC143EK
COILS AND FILTERS D5501, D5502, D5506, D5508, D5509 1SS133
L201 (FM Detector coil) ATE7003 D5703, D5951, D5953, D5801, D5952 1SS133
F202 (Ceramic filter) ATF-107 D5954 1SS355
F201 (Ceramic filter) ATF-119
F203 (AM Ceramic filter) ATF1155 D5511 MTZJ11B
D5701 MTZJ11C
CAPACITORS D5507 MTZJ6.8B
C206 CCSRCH100D50 D5609, D5512, D5513, D5514 UDZS6.8B
C212, C213, C226, C233-C235 CCSRCH101J50 C
C240 CCSRCH101J50 COILS AND FILTERS
C231, C232 CCSRCH150J50 L5501 LAU220J
C223 CEAT100M50
CAPACITORS
C229 CEAT101M10 C5502 (0.047F) ACH1246
C224 CEAT1R0M50 C5962, C5963, CCSRCH101J50
C227 CEAT220M25 C5901, C5903, C5906 CCSRCH331J50
C241 CEAT2R2M50 C5958, C5959 CEAL100M16
C243 CEAT330M16 C5531 CEAL100M50

C228 CEAT3R3M50 C5530 CEAL1R0M50


C237 CEAT470M10 C5510, C5702, C5717, C5718, C5803 CEAT100M50
C211 CEJA1R0M50 C5804, C5953, C5955, C5956 CEAT100M50 D
C210 CEJA470M16 C5526 CEAT101M16
C204, C238, C602 CKSRYB102K50 C5507, C5805 CEAT1R0M50

C101, C102, C208, C220, C239 CKSRYB103K50 C5951 CEAT220M50


C242, C601 CKSRYB103K50 C5501, C5504, C5806 CEAT470M16
C216, C217 CKSRYB123K50 C5528 CEAT470M50
C225 CKSRYB153K50 C5902, C5904 CEAT471M6R3
C201, C205, C209, C214, C230 CKSRYB223K50 C5506, C5612, C5613CKSRYB102K50

C236, C603 CKSRYB223K50 C5516, C5517, C5518, C5521, C5529 CKSRYB103K50


C221 CKSRYB224K10 C5593, C5594, C5601, C5603, C5605 CKSRYB103K50
C202, C222 CKSRYB473K16 C5607, C5609, C5610, C5703, C5808 CKSRYB103K50
C215 CKSRYB681K50 C5809, C5810, C5952, C5954, C5957 CKSRYB103K50 E
C5503, C5505, C5509, C5512, C5515 CKSRYB104K16
RESISTORS
R211 RD1/4PU221J C5527, C5532, C5591, C5616, C5802 CKSRYB104K16
R221 RD1/4PU222J C5960 CKSRYB104K16
R233 RD1/4PU391J C5592, C5801 CKSRYB221K50
R243 RS1/10S0R0J C5961 CKSRYB224K10
R103 RS1/10S331J C5807 CKSRYB473K25

R104 RS1/10S391J C5614 CKSRYF105Z10


Other Resistors RS1/16S###J
RESISTORS
OTHERS R5957 RD1/2PM121J F
CN201 13P Connector 52044-1345 R5953 RD1/2PM331J
BN201 4P Terminal AKA7003 R5802, R5804, R5807 RD1/4PU102J
Shield Case T ANK7072 R5954 RD1/4PU152J
Shield Case B ANK7073 R5601, R5606 RD1/4PU473J
XV-EV51 65
5 6 7 8
1 2 3 4

Mark No. Description Part No. Mark No. Description Part No.
C5501, C5504, C5526, C5806 CEAT470M16
Other Resistors RS1/16S###J C5528 CEAT470M50
A C5902, C5904 CEAT471M6R3
OTHERS C5506, C5612, C5613 CKSRYB102K50
CN5502 7P Connector 52045-0745 C5516-C5518, C5521, C5529 CKSRYB103K50
CN5509, CN5802 11P Connector 52045-1145
CN5701 13P Connector 52045-1345 C5593, C5594, C5601, C5603, C5605 CKSRYB103K50
CN5506 11P Plug AKP7058 C5607, C5609, C5610, C5703 CKSRYB103K50
CN5508 15P Plug AKP7060 C5808-C5810, C5952, C5954, C5957 CKSRYB103K50
C5503, C5505, C5509, C5512, C5515 CKSRYB104K16
CN5503, CN5505, CN5801 17P Plug AKP7061 C5527, C5532, C5616, C5802, C5960 CKSRYB104K16
CN5504, CN5507 21P Plug AKP7063
X5501 Ceramic RES. (10MHz) ASS7034 C5801 CKSRYB221K50
CN5510 2P Plug KM200SA2 C5961 CKSRYB224K10
CN5901 16P Connector VKN1192 C5807 CKSRYB473K25
B
CN5903 30P Connector VKN1206 RESISTORS
CN5902 7P Connector VKN1211 R5957 RD1/2PM121J
KN5501, KN5502 Earth metal FIT. VNF1084 R5953 RD1/2PM331J
KN5503 Earth metal FIT. VNF1084 R5802, R5804, R5807 RD1/4PU102J
JA5903 2P Pinjack XKB3039 R5954 RD1/4PU152J
R5601, R5606 RD1/4PU473J
CN5501 20P Socket XKP3051
OTHERS

B IF ASSY(XWZ3627) CN5502 7P Connector


CN5509, CN5802 11P Connector
CN5701 13P Connector
52045-0745
52045-1145
52045-1345
SEMICONDUCTORS CN5503, CN5801 17P Plug AKP7061
C IC5801 BU4094BCF CN5504 21P Plug AKP7063
> IC5507 NJM7805FA
> IC5508 NJM78M56FA X5501 Ceramic RES. (10MHz) ASS7034
IC5501 PDC097A CN5510 2P Plug KM200SA2
Q5951, Q5955 2SA1282 CN5901 16P Connector VKN1192
CN5903 30P Connector VKN1206
Q5801, Q5804 2SB1132 CN5902 7P Connector VKN1211
Q59522 SB1237X
Q5501, Q5701 2SD1858X KN5501, KN5502 Earth metal FIT. VNF1084
Q5806 2SD2012 L5902, L5903 VTL1084
Q5510, Q5511 2SD2114K JA5903 2P Pinjack XKB3039
CN5501 20P Socket XKP3051
Q5512, Q5803 DTA124EK

C AF ASSY(XWZ3618)
D Q5505, Q5509 DTA143EK
Q5506-Q5508 DTC124EK
Q5502, Q5805 DTC143ES
D5501, D5502, D5504, D5506 1SS133 SEMICONDUCTORS
IC8111, IC8801 AN4558NS
D5508, D5509, D5703, D5951, D5953 1SS133 IC8301 BA3838F
D5510, D5801, D5952, D5954 1SS355 IC8101 BU4052BCF
D5511 MTZJ11B IC8602 BU4066BCF
D5701 MTZJ11C IC8201 M65847AFP
D5507 MTZJ6.8B
IC8601, IC8603, IC8701, IC8702, IC8703NJM4558MD
D5609, D5610 UDZS15B IC8751, IC8752, IC8753, IC8802, IC8803NJM4558MD
D5512-D5514 UDZS6.8B IC8901 NJM7812FA
E Q8401, Q8402 2SC2412K
COILSANDFILTERS Q8201 2SD1858X
L5501 LAU220J
Q8501, Q8502 2SD2114K
CAPACITORS Q8403, Q8503, Q8754, Q8758 DTA124EK
C5502 (0.047F) ACH1246 Q8101, Q8102, Q8753, Q8759 DTC124EK
C5962, C5963 CCSRCH101J50 D8401, D8802 1SS355
C5901, C5903, C5906 CCSRCH331J50 D8201 MTZJ5.6B
C5958, C5959 CEAL100M16
C5531 CEAL100M50 D8901, D8902 MTZJ6.8B
D8601, D8602 UDZS6.8B
C5530 CEAL1R0M50
F C5510, C5702, C5717, C5718 CEAT100M50 CAPACITORS
C5803, C5804, C5953, C5955, C5956 CEAT100M50 C8212 CCSRCH101J50
C5507, C5805 CEAT1R0M50 C8705, C8706, C8709, C8710, C8755 CCSRCH331J50
C5951 CEAT220M50 C8759 CCSRCH331J50
C8217 CCSRCH471J50
66 XV-EV51
1 2 3 4
5 6 7 8

Mark No. Description Part No. Mark No. Description Part No.
C8609, C8610 CCSRCH820J50
SEMICONDUCTORS
C8111 CEAL100M50 IC8111, IC8801 AN4558NS A
C8113, C8119, C8120, C8221, C8509 CEAT100M50 IC8301 BA3838F
C8510, C8752, C8752, C8822, C8826 CEAT100M50 IC8101 BU4052BCF
C8833, C8834 CEAT100M50 IC8201 M65847AFP
C8789, C8823 CEAT101M16 IC8802, IC8803 NJM4558MD

C8902 CEAT1R0M50 IC8901 NJM7812FA


C8305, C8308, C8309, C8310, C8601 CEAT2R2M50 Q8401, Q8402 2SC2412K
C8602, C8701, C8702, C8751 CEAT2R2M50 Q8201 2SD1858X
C8117, C8118, C8201, C8213, C8222 CEAT470M16 Q8501, Q8502 2SD2114K
C8307, C8625, C8626, C8829, C8831 CEAT470M16 Q8403, Q8503 DTA124EK

C8905, C8906, C8907, C8908 CEAT470M16 Q8101, Q8102 DTC124EK


C8312 CEAT4R7M50 D8401, D8802 1SS355 B
C8903 CKSQYF105Z25 D8201 MTZJ5.6B
C8220, C8605, C8606 CKSRYB102K50 D8901, D8902 MTZJ6.8B
C8101, C8103, C8107, C8108, C8203 CKSRYB103K50
CAPACITORS
C8204, C8205, C8218, C8313, C8514 CKSRYB103K50 C8212 CCSRCH101J50
C8519, C8615, C8616, C8619, C8621 CKSRYB103K50 C8217 CCSRCH471J50
C8623, C8624, C8715, C8716, C8723 CKSRYB103K50 C8111 CEAL100M50
C8724, C8725, C8726, C8727, C8728 CKSRYB103K50 C8113, C8119, C8120, C8221 CEAT100M50
C8729, C8730, C8736, C8763, C8764 CKSRYB103K50 C8509, C8510, C8822, C8826 CEAT100M50

C8771, C8772, C8773, C8774, C8775 CKSRYB103K50 C8833, C8834 CEAT100M50


C8776, C8778, C8779, C8810, C8811 CKSRYB103K50 C8789, C8823 CEAT101M16
C8812, C8813, C8828, C8830 CKSRYB103K50 C8902 CEAT1R0M50 C
C8301, C8302, C8303, C8407, C8515 CKSRYB104K16 C8305, C8308-C8310 CEAT2R2M50
C8518, C8754 CKSRYB104K16 C8117, C8118, C8201, C8213, C8222 CEAT470M16

C8219 CKSRYB122K50 C8307, C8829, C8831, C8905-C8908 CEAT470M16


C8603, C8604 CKSRYB222K50 C8312 CEAT4R7M50
C8904 CKSRYB223K50 C8903 CKSQYF105Z25
C8304 CKSRYB224K10 C8220 CKSRYB102K50
C8756 CKSRYB333K25 C8101, C8103, C8107, C8108 CKSRYB103K50

C8703, C8704, C8753 CKSRYB471K50 C8203-C8205, C8218, C8313, C8514 CKSRYB103K50


C8216 CKSRYB472K50 C8519, C8810-C8813, C8828, C8830 CKSRYB103K50
C8202, C8223, C8306, C8788, C8824 CKSRYB473K25
C8301-C8303, C8407, C8515, C8518 CKSRYB104K16
C8207, C8208, C8209 CKSRYB683K16 C8219 CKSRYB122K50 D
C8760 CKSRYB821K50 C8904 CKSRYB223K50

C8206 CKSRYB822K50 C8304 CKSRYB224K10


C8513 CKSRYF105Z10 C8216 CKSRYB472K50
C8214, C8215 CKSRYF224Z16 C8202, C8223, C8306, C8788, C8824 CKSRYB473K25
C8207-C8209 CKSRYB683K16
RESISTORS C8206 CKSRYB822K50
R8216 RD1/4PU102J
R8724, R8814 RD1/4PU470J C8513 CKSRYF105Z10
R8901, R8904 RD1/4PU471J C8214, C8215 CKSRYF224Z16
R8625, R8626RD1/4PU821J
R8717, R8718, R8721RS1/16S1002F RESISTORS
R8216 RD1/4PU102J E
R8722, R8767, R8768, R8769 RS1/16S1002F R8814 RD1/4PU470J
R8770, R8808, R8809, R8810, R8811 RS1/16S1002F R8901, R8904 RD1/4PU471J
Other Resistors RS1/16S###J R8808-R8811 RS1/16S1002F

OTHERS OTHERS
CN8301 4P Jumper connector 52147-0410 CN8301 4P Jumper connector 52147-0410
CN8751, CN8901 17P Socket AKP7072 CN8901 17P Socket AKP7072
CN8101 21P Socket AKP7074 CN8101 21P Socket AKP7074
Heat sink ANH-309 Heat sink ANH-309
Screw BBZ30P080FMC Screw BBZ30P080FMC

JA8401 4P Pinjack XKB3040 JA8401 4P Pinjack XKB3040 F


CN8701 8P Socket XKP3052

C AF ASSY(XWZ3628) J DISP 1 ASSY


XV-EV51 67
5 6 7 8
1 2 3 4

Mark No. Description Part No. Mark No. Description Part No.
SEMICONDUCTORS 5301 3P Cable holder 51048-0300
Q5101 2SC2412K
A D5102, D5103
D5105, D5106
1SS133
MTZJ6.8B L LED ASSY
COILS AND FILTERS SEMICONDUCTORS
L5101 LAU220J D5203, D5205 UDZS6.8B

SWITCHES AND RELAYS OTHERS


S5101, S5102, S5103, S5104, S5105 ASG7013 CN5203 KR Connector S2B-PH-K

CAPACITORS
C5109 CCSRCH100D50 M MIC ASSY
C5110 CCSRCH220J50
C5103 CEAT101M10 SEMICONDUCTORS
B
C5108 CEAT470M16 IC5401 M65855FP
C5106 CKSRYB102K50 IC5402 NJM4558MD
Q5402 2SJ103
C5101, C5104 CKSRYB103K50 Q5401 DTA143EK
C5111 CKSRYB104K16 D5401 MTZJ5.1B
C5105 CKSRYB681K50
COILS AND FILTERS
RESISTORS L5401 LAU100J
R5106 RD1/4PU101J
Other Resistors RS1/16S###J CAPACITORS
C5418, C5419, C5427, C5428 CCSRCH101J50
OTHERS C5409 CEAL220M16
C CN5101 11P Connector 52044-1145 C5416 CEAL2R2M50
5101 Remote recevier unit GP1U26X C5401 CEAT101M16
C5422 CEAT2R2M50

I DISP 2 ASSY C5420


C5432
CEAT470M16
CEAT4R7M50
SEMICONDUCTORS C5433 CEATR22M50
C5421, C5426 CEJQ2R2M50
Q5201 2SC2412K
C5431 CEJQ4R7M50
D5206, D5207 1SS355
D5202, D5204 MTZJ6.8B
C5410 CEJQR47M50
C5423 (XWZ3626) CKSRYB102K50
SWITCHES AND RELAYS C5423 (XWZ3623) CKSRYB331K50
S5201, S5202, S5203, S5204, S5205 ASG7013
D C5404, C5408, C5411, C5430 CKSRYB103K50
S5206, S5207, S5208, S5209, S5210 ASG7013 C5402, C5412, C5429, C5436 CKSRYB104K16
S5211 ASG7013
C5414 CKSRYB122K50
CAPACITORS C5405 CKSRYB123K50
C5201 CKSRYB103K50 C5406 CKSRYB472K50
C5407 CKSRYB473K25
RESISTORS
R5211 RD1/4PU101J RESISTORS
Other Resistors RS1/16S###J R5401 RD1/4PU561J
VR5401 10k-B XCS3007
OTHERS Other Resistors RS1/16S###J
5202 3P Cable holder 51048-0300
E 5201 5P Cable holder 51048-0500 OTHERS
J5202 3P Jumper wire D20PYY0320E 5401 4P Cable holder 51048-0400
J5102 Jumper wire D20PYY0510E J5401 Jumper wire D20PYY0430E
J5203 Connector Assy PF02PG-B07 KN5401 Earth metal FIT. VNF1084
JA5401, JA5402 MIC Jack XKN3012
LED Holder XMR3053

H DISP 3 ASSY G DVD IF ASSY


SEMICONDUCTORS
SWITCHES AND RELAYS > IC1902 BA06FP
S5301, S5302, S5303 ASG7013 IC1941 MM1567AJ
> IC1906 NJM2391DL1-33
F
RESISTORS > IC1901, IC1903 NJM78M05DL1A
Other Resistors RS1/16S###J IC1921 PCM1742KE

OTHERS > IC1904 PQ025EH01ZP

68 XV-EV51
1 2 3 4
5 6 7 8

Mark No. Description Part No. Mark No. Description Part No.
> IC1905S-8540 B00FN-IMA
IC1962 TC74VHC125FT D601 RB501V-40
IC1961 TC74VHCT125AFT A
Q1931 2SA1576A COILSANDFILTERS
L6990 (330mH) ATL7007
> Q1901C PH6312 L300 LCYA2R7J2520
Q1941, Q1961 RN1903 L5010, L5020, L5040 ( Chip 60mH) VTL1075
Q1942 RN2903
Q1921, Q1922, Q1932 UN5212 CAPACITORS
D1901, D1932-D1935 1SS355 C301, C302 CCSRCH100D50
C310 CCSRCH151J50
D1902 RB051L-40 C307 CCSRCH180J50
D1931 UDZS5.1B C360 CCSRCH330J50
C391 CCSRCH331J50
COILSANDFILTERS
L1901 (SMP Power Inductor) ATL7003 C351, C651 CCSRCH470J50 B
L1902 (SMP Power Inductor) ATL7004 C627, C638, C696 CCSRCH471J50
L1903 (SMP Power Inductor) ATL7005 C309 CCSRCH560J50
CAPACITORS C633, C634 CCSRCH6R0D50
C1931, C1932 CCSRCH102J50 C308 CCSRCH7R0D50
C1920 CCSRCH121J50
C1901, C1904, C1906, C1912, C1925 CEV101M16 C113 CEV100M35
C1930, C1953 CEV101M16 C104 CEV101M4
C1910, C1917 CEV221M4 C316, C317, C405, C617, C619 CEV101M6R3
C111, C404 CEV220M16
C1903, C1908, C1928, C1950, C1996 CEV470M6R3 C368 CEV470M16
C1915 CKSQYB105K16
C1902, C1905, C1907, C1909, C1918 CKSRYB104K16 C334 CKSQYB225K10
C1923, C1924, C1926, C1929, C1933 CKSRYB104K16 C340, C641 CKSRYB102K50 C
C1941, C1943, C1945, C1947-C1949 CKSRYB104K16 C259, C311 CKSRYB103K50
C106, C248-C251, C255, C313 CKSRYB104K16
C1951, C1952, C1955-C1957 CKSRYB104K16 C315, C636, C637, C697 CKSRYB104K16
C1961, C1962, C1991-C1995 CKSRYB104K16
C1914, C1999 CKSYB475K16 C257, C258 CKSRYB223K50
C1916, C1919, C1998 (Ceramic C) DCH1148 C357 CKSRYB472K50
C103, C105, C148, C157, C158 CKSRYF104Z25
RESISTORS C253, C256, C304, C321-C333 CKSRYF104Z25
R1903 (0.068 1/4w) ACN7113 C365, C366, C603, C605, C607 CKSRYF104Z25
R1904 (0.1 1/10w) ACN7114
R1994, R1995 RS1/10S0R0J C612, C615, C616, C632 CKSRYF104Z25
R1907 RS1/16S1502F C606, C608-C611, C613 CKSRYF105Z10
R1906 RS1/16S3902F C622, C623, C629, C635, C699 CKSRYF105Z10 D

R1908 RS1/16S4700F RESISTORS


R121 RAB4C220J
OTHERS R123 RAB4C390J
CN1901, CN1961 30P Connector RKN1039 R340, R407 RS1/10S0R0J
CN1902 16P Connector RKN1057 R341 RS1/10S101J
CN1962 26P Connector RKN1067 R126-R129, R176-R179 RS1/10S220J

F DVDM ASSY
R254-R259 RS1/10S3R3J
R326-R330 RS1/16S1001F
R147, R265, R266, R304, R322 RS1/16S1002F
SEMICONDUCTORS R377, R378, R392, R393 RS1/16S1002F
R344, R351, R353, R354 RS1/16S1003D E
IC110 BA10358FV
IC251 BA6664FM
R359, R360, R365, R367, R368 RS1/16S1003D
IC604 K4S641632F-TC75
R372, R374, R376 RS1/16S1003D
IC302 K6T1008V2E-TB70
R331, R385 RS1/16S1003F
IC301 L6315ATXXTY
R302 RS1/16S1202F
R358, R394 RS1/16S1503F
IC351 M56788AFP
> IC303 (1.8V) PQ018EZ01ZP
R146 RS1/16S1801F
IC601 STI5519AVB-B0C
R612, R613 RS1/16S1802F
IC605 TC7WU04FU
R675, R678, R681, R684, R687 RS1/16S2700F
IC603 VYW1948
R690 RS1/16S2700F
R345, R355, R370, R371 RS1/16S3902F
Q300, Q602-Q607 2SA1576A F
Q652 DTC114TUA
R346, R356, R357, R362, R364 RS1/16S6802F
Q101, Q102 HN1A01F
R373 RS1/16S6802F
Q103 HN1C01FU
R3730 RS1/16S8202F
Q601 RN4982
XV-EV51 69
5 6 7 8
1 2 3 4

Mark No. Description Part No. Mark No. Description Part No.
C2208 CEATR10M50
OTHERS C2205, C2206 CEATR22M50
A CN2 12P Connector AKN7031
CN8 26P Connector AKN7032 C2403 CEJQ1R0M50
CN4 4P Connector RKN1045 C2805, C2806, C2810 CEJQ330M10
CN9 PH Connector S5B-PH-SM3 C2314 CEJQ470M16
7P Flexible Cable VDA1681 C2315 CKSRYB102K50
C2231 CKSRYB103K50
CN25 26P Connector VKN1318
CN22 30P Connector VKN1322 C2431, C2432 CKSRYB122K50
X301 Crystal RES.(20MHz) VSS1171 C2211, C2212 CKSRYB152K50
X601 Crystal RES.(27MHz) VSS1172 C2252 CKSRYB334K10
C2808 CQHA822J2A

D LOAB ASSY
C2801 CQMA123J50

B C2421, C2422 CQMA152J50


OTHERS C2409, C2410 CQMA223J50
CN602 KR Connector S2B-PH-K C2803, C2804 CQMA472J50
CN601 KR Connector S5B-PH-K C2802 CQMA682J50
PCB BORD VNP1836 C2209, C2210 CQMBA103J50
101 Reaf SWITCH VSK1011
C2307, C2308 CQMBA682J50
C2405, C2406 CQMBA683J50
E DECK ASSY(XWX3067) RESISTORS
SEMICONDUCTORS R2805 RD1/2VM161J
R2803 RD1/2VM4R7J
IC2202, IC2301, IC2401 BA4558F-HT
VR2301,VR2302,VR2401,VR2402(4.7k)PCP1028
IC2201 HA12136AF
C VR2801, VR2802(100k-B) PCP1032
Q2254 2SA1037K
Q2801, Q2802, Q2805 2SC1815
Q2806 2SC2240 OTHERS
CN2506 AKP7072
Q2251-Q2253 2SC2412K CN2302 B2B-PH-K
Q2261, Q2262, Q2301, Q2302 2SK373 CN2507 B3P-SHF-1AA
Q2351, Q2460 DTA124EK CN2301 B4B-PH-K
Q2303, Q2304 DTC114TK PCB VEF1040
Q2255, Q2352, Q2263 DTC143EK

D2256, D2301-D2306
D2252-D2255, D2307
1SS133
1SS355
E DECK ASSY(XWX3066)
D2201 MTZJ6.2A SEMICONDUCTORS
D IC2202, IC2301, IC2401 BA4558F-HT
COILSANDFILTERS IC2201 HA12136AF
L2802 LFA121J Q2254 2SA1037K
L2801 (OSC 105kHz) RTD1082 Q2801, Q2802, Q2805 2SC1815
L2401, L2402 (10mH) RTF1004 Q2806 2SC2240
L2403, L2404 (4.7mH) RTF1021
F2201, F2202 (MPX. Filter) RTF1217 Q2251-Q2253 2SC2412K
Q2261, Q2262, Q2301, Q2302 2SK373
CAPACITORS Q2351, Q2460 DTA124EK
C2809 CCCSL151K2H Q2303, Q2304 DTC114TK
C2301, C2302 CCSRCH100D50 Q2255, Q2352, Q2263 DTC143EK
C2423, C2424 CCSRCH221J50
C2253 CCSRCH271J50 D2256, D2301-D2306 1SS133
E D2252-D2255, D2307 1SS355
C2256, C2257, C2321-C2324 CCSRCH470J50
D2201 MTZJ6.2A
C2401, C2402 CCSRCH470J50
C2303, C2304 CCSRCH681J50 COILSANDFILTERS
C2807 CEAL470M6R3 L2802 LFA121J
C2203, C2204, C2207, C2311, C2312 CEAT100M50 L2801 (OSC Coil 105k) RTD1082
C2215 CEAT101M16 L2401, L2402 (10mH) RTF1004
L2403, L2404 (4.7mH) RTF1021
C2201, C2202, C2217, C2218, C2255 CEAT1R0M50 F2201, F2202 (MPX FIL.) RTF1217
C2404, C2419, C2420 CEAT1R0M50
C2251 CEAT220M50 CAPACITORS
C2216 CEAT221M16 C2809 CCCSL151K2H
F C2254 CEAT2R2M50 C2301, C2302 CCSRCH100D50
C2423, C2424 CCSRCH221J50
C2309, C2310, C2407, C2408 CEAT330M50 C2253 CCSRCH271J50
C2425 CEAT470M16 C2303, C2304 CCSRCH681J50
C2261, C2262 CEAT4R7M50
70 XV-EV51
1 2 3 4
5 6 7 8

Mark No. Description Part No.


C2807 CEAL470M6R3
C2203, C2204, C2207, C2311, C2312 CEAT100M50
C2215 CEAT101M16 A
C2201, C2202, C2217, C2218, C2255 CEAT1R0M50
C2404, C2419, C2420 CEAT1R0M50

C2251 CEAT220M50
C2216 CEAT221M16
C2254 CEAT2R2M50
C2309, C2310, C2407, C2408 CEAT330M50
C2425 CEAT470M16

C2261, C2262 CEAT4R7M50


C2208 CEATR10M50
C2205, C2206 CEATR22M50
C2403 CEJQ1R0M50 B
C2805, C2806, C2810 CEJQ330M10

C2314 CEJQ470M16
C2315 CKSRYB102K50
C2231 CKSRYB103K50
C2431, C2432 CKSRYB122K50
C2211, C2212 CKSRYB152K50

C2252 CKSRYB334K10
C2808 CQHA822J2A
C2801 CQMA123J50
C2421, C2422 CQMA152J50
C2409, C2410 CQMA223J50 C

C2803, C2804 CQMA472J50


C2802 CQMA682J50
C2209, C2210 CQMBA103J50
C2307, C2308 CQMBA682J50
C2405, C2406 CQMBA683J50

RESISTORS
R2805 RD1/2VM161J
R2803 RD1/2VM4R7J
VR2301,VR2302,VR2401,VR2402(4.7k)PCP1028
VR2801, VR2802 (100k-B) PCP1032
D
OTHERS
CN2506 17P SOCKET AKP7072
CN2302 CONNECTOR POST B2B-PH-K
CN2507 3P CONNECTOR B3P-SHF-1AA
CN2301 KR CONNECTOR B4B-PH-K
PCB BINDER VEF1040

XV-EV51 71
5 6 7 8
1 2 3 4

6. ADJUSTMENT
6.1 DECK SECTION
A 6.1.1 Adjustment condition

For adjustment, use the stereo power amplifier (M-EV51 or M-EV21).

7 Adjustment Condition
(1) The ground at the time of adjustment shall be W166. 7 List of Adjustments
(Refer to Fig. 6–3). ¶ Playback Section
(2) Clean the heads and demagnetize them using a head eraser. (1) Tape Speed Confirmation
(3) Set the measurement level to 0 dBV = 1 Vrms. (2) Head Azimuth Adjustment
(4) Use the specified tape for adjustment. Use the labeled (A) side (3) Playback Level Adjustment
B of the test tape.
NCT–111 : For Tape Speed adjustment
NCT-112 : For Playback adjustment ¶ Recording Section
STD–633 : Normal blank tape (1) Recording Bias Adjustment
(2) Recording Level Adjustment
* As the reference recording level is 250 nwb/m for NCT–
112, the recording level will be higher than 4 dB for NCT–
112 (160nwb/m). When adjusting, pay carefully attention PLAY BACK
to the type of tape used.
12.5k
(5) Provide yourself with the following measuring devides: 250 10k
÷ AC millivoltmeter
3dB 3dB 4dB
÷ Low-frequency oscillator
C ÷ Attenuator
÷ Oscilloscope
(6) Adjust both right and left channels unless other wise specified.
(7) Turn the DOLBY NR switch off unless otherwize specified.
(8) Warm up the unit for several minutes before adjustment. In RECORDING
particular, be sure to warm up the unit in the REC/PLAY mode
for 3 to 5 minutes before starting recording/playback frequency 12.5k
characteristics adjustment. 250 10k
(9) Always follow the indicated adjustment order.
3dB 3dB 5dB
Otherwise, a complete adjustment may not be achieved.

D
Fig. 6-1 Frequency Characteristics

Dolby noise reduction manufactured under license from Dolby


Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.

0 dB 30s
0 dB: 315 Hz, 250 nwb/m
E 30 s 30 s 30 s 10s 10s .......................................................................................................... 10s
315 Hz –20 dB
12.5 6.3 500 250 125
6.3 kHz 10 kHz 315 Hz 14 kHz kHz 10 kHz 8 kHz kHz 4 kHz 2 kHz 1 kHz Hz Hz Hz 63 Hz 40 Hz

Fig. 6-2 Test Tape NCT– 112

72 XV-EV51
1 2 3 4
5 6 7 8

6.1.2 Playback and Recording section

A
7 Playback Section
(1) Tape Speed Confirmation
No. Mode Input Signal/Test Tape Adjustment Points Measurement Points Adjustment Value Remarks

VR2701 (DECK ASSY) P1 R (CN2507) +10


FWD adjustment
1 PLAY NCT-111 (3 kHz)
(Refer to Fig. 6-3) (DECK ASSY)
3000 Hz –10 Hz REV Confirmation
( 3000 Hz +40
–40 Hz )

(2) Head Azimuth Adjustment


¶ This unit is equipped with auto tape selector.
¶ Do not switch between forward and reverse operation with the screwdriver inserted. B

No. Mode Input Signal/Test Tape Adjustment Points Measurement Adjustment Remarks
Points Value

Head azimuth P3 L (CN2507) After adjustment, apply silicon


NCT-110 test tape Max. Playback
1 PLAY adjustment Screw P1 R (CN2507) bond to the head azimuth
(Playback: 10 kHz, –20 dB) signal level
(Refer to Fig. 6-3) (DECK ASSY) adjustment screw.

(3) Playback Level Adjustment


¶ Since this adjustment determines playback DolbyNR level, Perform it carefully.
Measurement Adjustment C
No. Mode Input Signal/Test Tape Adjustment Points Remarks
Points Value

L ch VR2301 P3 L (CN2507)
NCT-112 test tape
1 PLAY P1 R (CN2507) –3.7 dBV
(Playback: 315 Hz, 4 dB)
R ch VR2302 (DECK ASSY)

7 Recording Section
(1) Recording Bias Adjustment
¶ After the adjustment, caution should be exercised so as not to become under bias by checking the distortion rate.
D
No. Mode Input Signal/Test Tape Adjustment Points Measurement Adjustment
Points Value Remarks

REC/ Input a 315Hz signal to the LINE -


–23.7 dBV
IN terminal. ∗
1 Input signal level
PAUSE
P3 L (CN2507)
P1 R (CN2507)
Load the STD–633 test tape and L ch VR2801 Repeat adjustment until playback level of
REC = (DECK ASSY)
the 10kHz signal is within 0dBV ±0.5dB
2 record/playback the 315Hz and
PLAY from that of the 315Hz signal.
10kHz signals. (see the Note below) R ch VR2802

Note: Set the 10kHz input signal level to the same value as the 315Hz input signal level of step 1.

E
(2) Recording Level Adjustment

No. Mode Input Signal/Test Tape Adjustment Points Measurement Adjustment


Points Value Remarks

REC/ Input a 315Hz signal to the LINE-


–7.7 dBV
IN terminal.∗
1 Input signal level
PAUSE
P3 L (CN2507)
P1 R (CN2507)
L ch VR2401 Repeat recording, playback and
REC = STD–633 test tape and record/ (DECK ASSY)
2 adjustment until playback level of the
PLAY playback the 315Hz signal.
R ch VR2402 315Hz signal becomes –7.7dBV±0.5dB.

XV-EV51 73
5 6 7 8
4 3 2 1
XV-EV51 74
F
Fig. 6-3 Adjustment and Measurement Points
Adjustment Screw Adjustment Screw
XNP3061-A REV Azimuth FWD Azimuth
RCH
CN2507
R

W246
17

E
1
3

W247
W228

W219
C2261
C2262

GNDA W248
3
1
L

LCH

C2210

GNDA C2254
C2209

W218 3 2 1 3 2 1
IC2202
DECK TP

(DECK TP)
4 5 4 5
CN2507 MECHANISM UNIT
C2255

CN2506
17
F2202 F2201
1
PRINTED PRINTED
W225 SIDE SIDE
ICT FC
D2256

VA12
W220
17.RECL C2251
PBL
DI P

W227 W249
15.GNDA

CONTACT SIDE
PBR MS W250
RECR W230 D2201
C2215
W223 W251
VREF
XPBMUTE
DOL ON\OFF W252 GNDA W253
10.RECMUTE GNDA VREF
D
PB/XREC
XBEATCUT W231 C2203
BIAS C2216 C2204
DGND W232
VA12
IC2201
DECK ASSY

5.VA+12
VA+12 W233
MS W234
VB+12 W221
1.GNDB C2206 C2205
W254
W255
C2208
W263

W222 W256

GNDA
W236

W235 VA12
W257
C2207
C2201

W259
W238 VA12
(Rch)

GNDA
W237
VREF
W258
C2202 CMKS-P3X

C2218
VA12
VR2302 VR2301 VR2402
PB LEVEL

BIG

Rch
REC LEVEL

Lch
C2217

PB LEVEL Adj.
(Rch)

R2321
W239
W240
Lch
W229
VR2401 VR2402

Rch
VR2302

REC LEVEL
(Lch) C

C2312
VREF
C2311
VR2401

Adj.

W241
W242

GNDA
(Lch)

W261 VA12
W260 VREF
VR2301

C2309
C2403

C2404

C2310
C2418
C2417

IC2301
C2308
C2314
W224
C2807

C2307
L2404
W243
C2410 L2403

C2409
Q2805
C2408 C2407

Production Code
C2425
IC2401
W244
C2406
Q2301
B
Q2302
Q2803

C2405

C2420
C2419

D2305

D2306
1 4 OPEN
R2805

L2401

L2402

C2422
1 4
R2806

C2421

CN2301
R2803 D2302 D2301

(Rch)
D2303

VR2802
D2304

OPEN
Q2802

1
Q2801

BIAS
L2802
VR2802

C2808
BIAS

1 2
C2802 C2804

Adj.

Lch
2
CN2302

Rch
VR2801

(Lch)

C2810

PRINTED
6

1
VR2801

C2803
C2801
SIDE A

C2809
Q2806
BIG
A

3
4
W262

SIDE
L2801
C2806 C2805
E DECK ASSY
A
4 3 2 1
5 6 7 8

6.2 TUNER SECTION

A
6.2.1 AM TUNER SECTION
There is no adjustment in the AM tuner.
6.2.2 FM TUNER SECTION
Set the mode selector to FM BAND.
Connect the wiring as shown in Fig. 6-5.

ANT. Input level and signal condition Adjustment


Step Adjustment
No. Title Frequency Input Level Adjust
Modulation Contents
(MHz) (dBµV) point
T-METER Adjust L201 so that the DC voltage between Pin
1 Adjustment 98 OFF 80 L201 21 and Pin 23 of IC201 (Test point Vtm) gets B
within 0 ± 50mV.

DC
MPX SG FM SG PRODUCT Voltmeter

FM75Ω antenna terminal

Fig.6.5 Adjustment Wiring Diagram


C

A FM/AM TUNER UNIT

D
L201

IC201

pin 21 pin 23

E
SIDE B
Fig.6.6 Adjustment Point

XV-EV51 75
5 6 7 8
1 2 3 4

6.3 DVD SECTION ADJUSTMENT ITEMS ana LOCATION


Adjustment Items Adjustment Points (Mechanism Part)
A
[Mechanism Part]
Cautions: After adjustment, adjustment screw locks with the
1 Tangential and Radial Height Coarse Adjustment
Screw tight.
2 DVD Jitter Adjustment
3 Initialize the Focus Sweep Setting
1 2 1 2
Tangential Radial
adjustment adjustment
[Electrical Part] screw screw
Electrical adjustments are not required.

D
6.4 JIGS and MEASURING INSTRUMENTS

Test mode remote control


Screwdriver (large) Screwdriver (medium) TV monitor unit (GGF1067)
E

Screw tight
(GYL1001)

Precise screwdriver DVD test disc


(GGV1025)

76 XV-EV51
1 2 3 4
5 6 7 8

6.5 NECESSARY ADJUSTMENT POINTS

When Adjustment Points A


Exchange Parts of Mechanism Assy

Mechanical ~, Ÿ, ! ∗ After adjustment, screw locks


Exchange the Pickup
point with the Screw tight.

Electric
point

Exchange the Traverse Mechanism


Mechanical !
point B

Electric
point

Mechanical Ÿ, ! ∗ After adjustment, screw locks


Exchange the Spindle Motor point with the Screw tight.

Electric
point
C

Exchange PCB Assy

Exchange PC Board
Mechanical
point
LOAB, DVDIF and DVDM ASSY
Electric
point
D


Purpose: To set the sweep which was correct with the
individual Traverse mechanism.

Be sure to perform the following step finally when replaced


Pickup, Traverse Mechanism and Spindle Motor.

ESC CLEAR
E

GGF1067
Test mode
remote control
unit

(It is necessary when performed adjustment procedure Ÿ.)

XV-EV51 77
5 6 7 8
1 2 3 4

6.6 TEST MODE

A TEST MODE: ON

Power Amplifier
ESC TEST

POWER

GGF1067
Test mode
ON remote control
unit
B
TEST MODE: DISC SET
CHECK
<TRAY OPEN> DVD Tuner Deck DVD, CD

OPEN/CLOSE DVD disc OPEN/CLOSE


(Player or Remote (Player or Remote
Control Unit) Control Unit)

DSC - &&&

TEST MODE: PLAY


<PLAY>

TV/LDP

An address is displayed
CAUTION:
Perform only trace, video and audio output are
D nothing.

< When playback with the target address of disc (DVD)>


For example, when playback with # 30000

During PLAY +10 3 0 0 0 0 CHP/TIM Press keys in order

030000

E
TEST MODE: OFF Power Amplifier

ESC

POWER
OR
GGF1067
Test mode
OFF remote control
unit
F

78 XV-EV51
1 2 3 4
5 6 7 8

6.7 MECHANISM ADJUSTMENT

1 Tangential and Radial Height Coarse Adjustment

START
Cautions:
• Remove the servo mechanism. Because there is not a Spacer for height adjustment in
• Remove a Spacer for height adjustment adjustment after the second time, will keep it at need.
attached to the back side (shaded area) (This parts is Traverse mechanism exclusive use of a model
of the Servo Mechanism (Float Base) with for 2001 years)
nippers.
7.3mm

Servo Mechanism B

Float Base
Put a spacer between a Tangential (or Radial) adjustment
screw and Mechanism Base and turn each screw to adjust
the height. (Refer to "6.3 ADJUSTMENT ITEMS AND
LOCATION".)

Spacer for Height adjustment


Note:
Turn the Short switch to Short side when Turn a flat side
removing the Pickup Flexible Cable. into bottom
(Refer to "7.1.6 DISASSEBLY".)
C

XV-EV51 79
5 6 7 8
1 2 3 4

2 DVD Jitter Adjustment


A • Playback method of inner and outer address for the purpose is refererd to "6.6 TEST MODE".
• Jitter indication of the monitor is refererd to "7.1.1 TEST MODE (Display Specification of the Test Mode)".
Use disc: GGV1025

START
Mechanism Assy
• Test mode • Play the DVD test disc
• Play the DVD test disc Adjust the Tangential at inner track
at outer track Adjustment Screw so that (around #30000)
(around #200000) jitter becomes minimum.

J : Min

Mechanism Assy

Adjust the Radial


Adjustment Screw so that
jitter becomes minimum.

J : Min

J: ----

• Play the DVD test disc


at outer track
Monitor (around #200000)
Player

Mechanism Assy

Readjust the Tangential


CHECK Adjustment Screw so that
Turn the POWER OFF in Confirm the error rate that is jitter becomes minimum.
case of NG once, and displayed "OK"
perform the adjustment NG
once again. (Example ERROR RATE: 6.6oe - 6 OK )
J : Min
K

E
O

If error rate is OK, Disc playback normally.


locks a root of • The measurement of block error rate
tangential and radial ESC
adjustment screws with ESC 5
the Screw tight, and
go to step ! .

Screw tight: GYL1001


Test mode end

80 XV-EV51
1 2 3 4
5 6 7 8

3 Initialize the Focus Sweep Setting A

Purpose: To set the sweep which was correct with the individual Traverse mechanism.

Turn on the Player

POWER ESC CLEAR

Note: Be sure to perform this step when replaced the Pickup or Traverse mechanism.

XV-EV51 81
5 6 7 8
1 2 3 4

7. GENERAL INFORMATION
7.1 DIAGNOSIS
A 7.1.1 TEST MODE
Test Mode Functional Specification
1 How to Enter Test mode
Turn the power on while short-circuiting with TEST jumper (W284) and VE+5 jumper (W282) on the IF Assy.
Indicate with "U-TEST" in this time.

2 Release the test mode


• Turn off the power.
• Press the [ESC] (A8-5F) key of the remote control unit and reset it.

3 Tray open / close


B
• Press the [REPEAT A-B] (A8 - 48) key of the remote control unit.
• Press the [OPEN / CLOSE] key of the main unit from the stop state.

4 Playback stop
• Press the [REPEAT] (A8 - 44) key of the remote control unit from the playback state.

5 LD ON
DVD : Press the [TEST] (A8-5E) and [1] (A8-01) keys in order, and turn on the laser diode (650n).
CD : Press the [TEST] (A8-5E) and [4] (A8-04) keys in order, and turn on the laser diode (780n).

6 Focus on / sweep
C 1. Lock the focus by pressing the [TEST] (A8-5E) and [2] (A8-02) keys in order.
2. Repeat focus sweep by pressing the [TEST] (A8-5E) and [3] (A8-03) keys in order.

7 Spindle FG servo
CAV : Press the [TEST] (A8-5E) and [5] (A8-05) keys in order,then rise up the spindle and it becomes FG servo on.
CLV : Press the [TEST] (A8-5E) and [9] (A8-09) keys in order,then rise up the spindle and it becomes FG servo on.

8 Tracking open / close


1. Open tracking by pressing the [STEP FWD] (A8-54) key of the remote control unit in the play state.
2. Close tracking by pressing the [STEP REV] (A8-50) key of the remote control unit in the play state.

9 Slider servo on/off


D 1. Turn on the slider servo by pressing the [TEST] (A8-5E) and [CX] (A8-0E) keys in order.
2. Turn off the slider servo by pressing the [TEST] (A8-5E) and [TV/LDP] (A8-0F) keys in order.

0 Slider in / out
Slider in : In the tracking off state, press the [SCAN REV] (A8-11) key of the remote control unit.
Slider out : In the tracking off state, press the [SCAN FWD] (A8-10) key of the remote control unit.

- Play (perform only the ID search and trace to the specified location)
Press the [TV/LDP] (A8-0F) key of the remote control unit from the stop state.
Perform only trace, video and audio output are nothing.

E = Screen display ON/OFF


1. Turn off the display by pressing the [AUDIO] (A8-1E) key of the remote control unit.
2. Turn on the display by pressing the [DISPLAY] (A8-43) key of the remote control unit.

82 XV-EV51
1 2 3 4
5 6 7 8

~ Search
1. Search address input entry
• It becomes the address input mode when pressing the [+10] (A8-1F) key. (Most significant digit of an address displays ">".)
• In this time, display the last address as the initial state. A

2. Search address input


• Press the [0] to [9] (A8-00 to 09) keys of the remote control unit. In the DVD, set an address with hexadecimal.
• In the address input mode, turn to the hexadecimal input by pressing the [PROGRAM] (A8-4C) key (display a "∗" mark)
and [1] to [6]keys are each input as A to F.
• In this time, do not accept the [7],[8],[9] and [0] keys. Hexadecimal input and decimal input can switch with toggle.
• In case of CD, perform only the absolute time search.

3. Search execution
• Press the [CHP/TM] (A8-13) key of the remote control unit.
• After the search, perform only trace and video and audio outputs are nothing.
B
4. Release the Search address input
• Clear the address by pressing the [CLEAR] (A8-45) key. Release the address input mode when pressing the [CLEAR]
key once again.

XV-EV51 83
5 6 7 8
1 2 3 4

Display Specification of the Test Mode

Character in bold : Item name 2


A
: Information display 3

1 7
8
5 9
6 12
13 14
15
16
17
10 18
B 11 19

1 Address indication 0 Disc sensing [DSC – ∗ ∗ ∗]


The address being traced is displayed in number. The type of discs loaded is displayed.
(as for the DVD, indication of decimal number is possible.) [DVD], [CD ], [VCD], [ ]
DVD : ID indication (hexadecimal number, 8 digits)
[∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗]
CD : A-TIME (min. sec.) [0 0 0 0 ∗ ∗ ∗ ∗] - Jitter value [J – ∗ ∗ ∗ ∗]
C
2 Code indication of remote control unit [R – ∗ ∗ ∗ ∗] = Version of the AV-1 chip / version of firmware
In case of double code, display a 2nd code. [AV: ∗ ∗ / ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗]

3 Main unit keycode indication [K – ∗ ∗] ~ Version of the FL controller [FL: ∗ ∗ ∗ ∗]

5 Tracking status [TRKG – ∗ ∗ ∗] ! Region setting of the player [REG: ∗]


Tracking on : [ON] Setting value : [1] to [6]
Tracking off : [OFF]
@ Destination setting of the FL controller
6 Spindle status [SPDL – ∗ ∗ ∗] [MDL: ∗ ∗ ∗ ∗ / ∗ ∗ ∗]
[OFF], [A/B] (ACC/BRK), [CAV], [CLV] Four characters in the front represent the type of model.
D Three characters in the back represent the destination code.
7 Mechanism (loading) position value [M – ∗ ∗] J: /J, K: /KU, /KC, /KU/KC, R: /RAM/RL/RD, LB: /LB,
Unknown : [01] or [41] WY: /WY
Open state : [04]
Close state : [08] # Part number of the flash ROM
During opening : [12] [∗ ∗ ∗ ∗ ∗ ∗]
During closing : [22]
$ Version of the flash ROM [V: ∗. ∗ ∗ ∗]
8 Slider position [S – ∗ ∗ ∗ ∗] Flash ROM size [FLSH = ∗]
CD TOC area : [IN ]
CD active area : [CD] % Revision of the system controller [S: ∗ . ∗ / ∗ ∗ ∗ ]

E 9 Output video system [V – ∗ ∗ ∗ ∗] ^ Revision of the DVD mechanism controller


NTSC system : [NTSC] [M: ∗ / ∗ ∗]
PAL system : [PAL]
Automatic setting : [AUTO]
Scart terminal output [SK – ∗ ∗]
(Display only the WY model which can do the output setting
of scart terminal.)
VIDEO : [00]
S-VIDEO : [01]
RGB : [02]

84 XV-EV51
1 2 3 4
5 6 7 8

Shortcut key Functional Specification


Only in the normal playback, the following setting can by pressing the required key after having pressed the "TEST" key of
the remote control unit. How to release: Press the "ESC" key. (function with indication) A
Command Contents Conditions Remote Control Key Name Remote Control Code
Memory clear & region / revision indication CLEAR (LD remote control unit) A8-45
Average value measurement of DVD error rate 5 (LD remote control unit) A8-05
CD error rate measurement 5 (LD remote control unit) A8-05
Aspect: Pan scan 2 A6-01
Aspect: Letter box 3 A6-02
Aspect: Wide 4 A6-03
Digital: PCM 5 A6-04
Digital: AC-3/PCM 6 A6-05
B
Virtual Dolby: VDD=OFF Only correspondence model 7 A6-06
Virtual Dolby: VDD=ON Only correspondence model 8 A6-07
Digital output ON REPEAT A A6-A1, AF-E8
Digital output OFF REPEAT B A6-95
DTS Digital Out ON STEP FWD A6-A1, AF-B7
DTS Digital Out OFF STEP REV A6-A1, AF-B8
Scart terminal output: VIDEO WY, Model to include scart AUDIO A6-A1, AF-BE
Scart terminal output: S-VIDEO WY, Model to include scart SUBTITLE A6-A1, AF-36
Scart terminal output: RGB WY, Model to include scart ANGLE A6-A1, AF-B5
Audio 5.1CH ON Only correspondence model KD_ENTER A6-74 C

FL indication of EDC / ID error CX (LD remote control unit) A8-0E


ZOOM ON Only correspondence model ZOOM A6-A1, AF-37
ZOOM OFF Only correspondence model < X3 (LD remote control unit) A8-59
Service mode indication (error rate indication, etc.) CHP/TIM (LD remote control unit) A8-13
Model information indication CHAP (LD remote control unit) A8-40
Background color change +10 (LD remote control unit) A8-1F
Audio last stage mute ON 9 A6-08
Audio last stage mute OFF 0 A6-09
Title search Input mode IN SIDE A (LD remote control unit) A8-4D D
Title No. input Numbers (LD remote control unit) A8-00 to A8-09
Search execution PLAY (LD remote control unit) A8-17
AUDIO (LD remote control unit) A8-1E
Region confirmation mode
Numbers (LD remote control unit) A8-01 to A8-08
• Service mode indication
ID Address
Always display error rate. Exponential indication ∗.∗∗e-∗ (with both DVD and CD)
EDC/ID/AV1 error history (ID Address, EDC/ID/AV1 Error, errors of past eight times)
Self-diagnostic function (when mechanism error occurred, display the mechanism error history)

• Error rate average value total (ESC +5)


Calculation number of times displays exponent from average value of eight times.
After the calculation result, display OK/NG. Tray is open in case of NG (with both DVD and CD) E
DVD: OK with less than 8.0e-4 CD: OK with less than 7.6e-4

Note: Because an OK/NG judgment cannot be DVD with a static image mode as menu screen, confirm it by an animation.

• Model information indication contents (ESC+CHAP)


Display = to ^ in the test mode indication. However, Change the indication of S as B.E VERSION and it of M as F.E VERSION.
Refer to the "Specification of Model Information Display".

• Background color change (ESC+ +10)


Change black and green with toggle whenever pressing the key (the background color that green is using with SETUP NAVIGATOR).

• Region confirmation mode (ESC+ A.MON + 1to 8)


Input region No. after pressing the ESC+A.MON keys. When it is different from the setting, display and open the tray.
F

XV-EV51 85
5 6 7 8
1 2 3 4

Specification of Model Information Display

A • Display contents

3
2
1

4
5

6
7
8
9
B
10

Character in bold : Item name


: Information display

1 Model name
Display it according to model information set from the FL controller.
2 Destination indication
Display it according to model information set from the FL controller.
C 3 Region No.
4 Part number
5 ROM version
6 Flash size
7 FL controller version

8 CHIP VERSION
Version of ST CHIP
CUT ID / JTAG ID

(two columns) (eight columns)


9 B.E VERSION
D Version of BACK END (version of ST core software)
. /
softwareVersion . softwareRevision / buildNumber
0 F.E VERSION
Version of FRONT END (version of mechanism controller CHIP software)
/
MainVersion / SubVersion

86 XV-EV51
1 2 3 4
5 6 7 8

Functional Specification of the Service Mode


• FL indication of EDC / ID error (short cut function)
Display it in FL with ESC+CX keys (LD remote control unit). A
Indication is released with ESC key during indication.

FL indication contents
00 /00 / 01 ∗

Display number of the location that caused EDC and ID errors

Retry number of times of the latest ID error

Retry number of times of the latest EDC error


B
∗ mark: When even once causes AV1 error, lights.

• Service mode screen display


Display to the screen with ESC+CHP/TIM keys.
Release the indication with ESC key.
Indication contents
ID Address 1
Always indicate error rate 2 and exponent indication
EDC/ID/AV1 error history (ID Address, EDC/ID/AV1 Error, past eight times) 3 C
Contents of AV1 error
BIT 0: EDC error, FEC I/F buffer overflow and not valid occur in the BE code (B.E error).
BIT 1: ID is different from the target in the BE code (B.E error).
BIT 2: There is error in the EDC data of 2 bytes which added to the FE (F.E error).

• Self-diagnostic function 4
Check that the F.E is normal or not.
FE OK : Abnormality is not found in the F.E.
FE Error : Abnormality is found in the F.E.
Indicate the mechanism error history by pressing the CHP/TIM key once again.
Change indication by pressing the CHP/TIM key with toggle afterwards.
Refer to the "Display of the Mechanism Error History". D

Indication plan contents

3
1
2

Character in bold : Item name


: Information display

XV-EV51 87
5 6 7 8
1 2 3 4

7.1.2 DISPLAY OF THE MECHANISM ERROR HISTORY


3 Error contents indication
When mechanism error (FE error) occurred, the mechanism Indicate the error contents which occurred with
A error history of maximum past eight times is displayed by character.
pressing the CHP/TIM key during service mode screen
display. Examples: When Error code is 0x13 (Focus lost timeout)
Indication displayed in the screen upper part is new error. and Servo state is 0x05 (Disc judge),
"Focus lost timeout in Disc judge"
• Indication contents
1 Error code ∗ Movement in the error occurrence: open the tray when
Two characters in the front represent the Error Code and SERVO STATE is Disc Judgs, and others stop.
two characters in the back represent the Servo State. However, error code is exception in the device error of
The detail is as follows. 0xd∗.

B Servo State Indication contents


Error Code
2 Error occurrence time 1 2
Error indicates the time which occurred after system 3
turned on the power supply. 1 2
∗ When time of new error is short, it becomes assumed 3
power off once.

C
• Table of Error Code • Table of Servo State
FOCUS ERROR 0x0∗ FOCUS TIMEOUT 0x1∗ 0x00 Reset
Focus on error 0x01 Focus on timeout 0x11 0x01 Stop (inside position)
Focus off error 0x02 Focus off timeout 0x12 0x02 Stop (any position)
Focus lost error 0x03 Focus lost timeout 0x13 0x03 Braking for stop
Focus balance adjust error 0x04 Focus balance adjust timeout 0x14 0x04 New disc
Focus gain adjust error 0x05 Focus gain adjust timeout 0x15 0x05 Disc judge
Focus sweep error 0x06 Focus sweep timeout 0x16 0x06 Reserved 1
Focus reflection error 0x07 Focus reflection timeout 0x17 0x07 Playing
TRACKING ERROR 0x2∗ TRACKING TIMEOUT 0x3∗ 0x08 Start up
D Tracking on error 0x21 Tracking on timeout 0x31 0x09 Seeking
Tracking off error 0x22 Tracking off timeout 0x32 0x0A Pausing
Tracking lost error 0x23 Tracking lost timeout 0x33 0x0B Reading BCA
Tracking balance adjust error 0x24 Tracking balance adjust timeout 0x34 0x0C Reserved 2
Tracking gain adjust error 0x25 Tracking gain adjust timeout 0x35 0x0D
Tracking jump error 0x26 Tracking jump timeout 0x36 0x0E
STEPPING ERROR 0x4∗ STEPPING TIMEOUT 0x5∗ 0x0F
Stepping on error 0x41 Stepping on timeout 0x51
Stepping off error 0x42 Stepping off timeout 0x52
Stepping lost error 0x43 Stepping lost timeout 0x53
Stepping move error 0x44 Stepping move timeout 0x54
E SPINDLE ERROR 0x6∗ SPINDLE TIMEOUT 0x7∗
Spindle on error 0x61 Spindle on timeout 0x71
Spindle off error 0x62 Spindle off timeout 0x72
Spindle lost error 0x63 Spindle lost timeout 0x73
Spindle CAV error 0x64 Spindle CAV timeout 0x74
Spindle CLV error 0x65 Spindle CLV timeout 0x75
ACQUISITION ERROR 0x8∗ ACQUISITION TIMEOUT 0x9∗
PLL lost error 0x83 PLL lost timeout 0x93
DECODER ERROR 0xa∗ DECODER TIMEOUT 0xb∗
ID lost error 0xa3 ID lost timeout 0xb3
DEVICE ERROR 0xd∗ FAIL SAFE 0xe∗
F SRAM error 0xd1 unexpected error 0xe1

88 XV-EV51
1 2 3 4
5 6 7 8

ERROR CODE TABLE


Error Name No. Causes Check Item Possibility of Trouble Remarks
FOCUS ERROR (0 x 0∗) A
Are not there a dirt or a scratch in 1. Pickup
Focus on error 0 x 01 Focus on could not be completed the Disc? Does LD become weak? 2. Driver
Does the lens move up and down? 3. L6315 (Front End IC)
Focus off error 0 x 02 Focus off could not be completed Unknown
Are not there a dirt or a scratch in
Focus lost error 0 x 03 Focus servo is lost 1. Pickup
the Disc? Does LD become weak?
Focus balance adjust error 0 x 04 AFB on could not be completed
Focus gain adjust error 0 x 05 Focus AGC could not be completed
Focus sweep error 0 x 06
Focus reflection error 0 x 07 Dimensions of S curve did not reach to the aim value Does LD become weak? 1. Pickup
FOCUS TIMEOUT (0 x 1∗)
Are not there a dirt or a scratch in 1. Pickup B
Focus on timeout 0 x 11 Did timeout at focus on the Disc? Does LD become weak? 2. Driver
Does the lens move up and down? 3. L6315 (Front End IC)
Focus off timeout 0 x 12 Did timeout at focus off

Focus lost timeout 0 x 13 Did timeout at focus backup

Focus balance adjust timeout 0 x 14 Did timeout at AFB


Focus gain adjust timeout 0 x 15 Did timeout at AGC
Focus sweep timeout 0 x 16
TRACKING ERROR (0 x 2∗)
1. Pickup
Tracking on error 0 x 21 Tracking on could not be completed 2. Driver
3. L6315 (Front End IC)
Tracking off error 0 x 22 Tracking off could not be completed C
Tracking lost error 0 x 23 Tracking servo is lost 1. Pickup
Tracking balance adjust error 0 x 24 ATB could not be completed 1. Pickup
Tracking gain adjust error 0 x 25 AGC could not be completed 1. Pickup
Tracking jump error 0 x 26 Tracking jump could not be completed
TRACKING TIMEOUT (0 x 3∗)
1. Pickup
Are not there a dirt or a scratch in
Tracking on timeout 0 x 31 Did timeout at tracking on 2. Driver
the Disc?
3. L6315 (Front End IC)
Tracking off timeout 0 x 32 Did timeout at tracking off
Are not there a dirt or a scratch in
Tracking lost timeout 0 x 33 Did timeout at tracking backup 1. Pickup
the Disc?
Tracking balance adjust timeout 0 x 34 Did timeout at ATB 1. Pickup D
Tracking gain adjust timeout 0 x 35 Did timeout at AGC 1. Pickup
Tracking jump timeout 0 x 36 Did timeout at tracking jump
STEPPING ERROR (0 x 4∗)
1. Pickup
Stepping on error 0 x 41 Stepping on could not be completed 2. Driver
3. L6315 (Front End IC)
Stepping off error 0 x 42 Stepping off could not be completed
Stepping lost error 0 x 43 Stepping servo is lost
Do move to inner and outer periphery
1. Stepping motor
of the stepping in the test mode?
Stepping move error 0 x 44 Stepping could not move 2. Inside switch
Do indicate "S-04" at the most inner
3. Driver
periphery of the stepping?
E
STEPPING TIMEOUT (0 x 5∗)
1. Pickup
Stepping on timeout 0 x 51 Did timeout at stepping on 2. Driver
3. L6315 (Front End IC)
Stepping off timeout 0 x 52 Did timeout at stepping off
Stepping lost timeout 0 x 53 Did timeout at stepping backup
Do move to inner and outer periphery
1. Stepping motor
of the stepping in the test mode?
Stepping move timeout 0 x 54 Did timeout at stepping movement 2. Inside switch
Do indicate "S-04" at the most inner
3. Driver
periphery of the stepping?

XV-EV51 89
5 6 7 8
1 2 3 4

Error Name No. Causes Check Item Possibility of Trouble Remarks


SPINDLE ERROR (0 x 6∗)
Spindle on error 0 x 61 Spindle on could not be completed
A Spindle off error 0 x 62 Spindle off could not be completed
Spindle lost error 0 x 63 Spindle lost control
Spindle CAV error 0 x 64 CAV on could not be completed
Spindle CLV error 0 x 65 CLV on could not be completed
SPINDLE TIMEOUT (0 x 7∗)
Spindle on timeout 0 x 71 Did timeout at spindle on
Spindle off timeout 0 x 72 Did timeout at spindle stop
Are not there a dirt or a scratch in 1. Spindle motor
Spindle lost timeout 0 x 73 Did timeout at spindle backup the Disc? 2. Spindle driver
Is FG output from the driver?
Is spindle rotating? 1. Spindle motor
Spindle CAV timeout 0 x 74 Did timeout at CAV on Is FG output from the driver? 2. Spindle driver
B Is the PDM output from L6315? 3. L6315 (Front End IC)
Spindle CLV timeout 0 x 75 Did timeout at CLV on
ACQUISITION ERROR (0 x 8∗)
Are not there a dirt or a scratch in 1. Pickup
PLL lost error 0 x 83 PLL is lost the Disc? 2. L6315 (Front End IC)
ACQUISITION TIMEOUT (0 x 9∗)
Are not there a dirt or a scratch in 1. Pickup
PLL lost timeout 0 x 93 Did timeout at PLL backup the Disc? 2. L6315 (Front End IC)
DECODER ERROR (0 x a∗)
Are not there a dirt or a scratch in 1. Pickup
ID lost error 0 x a3 ID is not readable the Disc? 2. L6315 (Front End IC)
DECODER TIMEOUT (0 x b∗)
C Are not there a dirt or a scratch in 1. Pickup
ID lost timeout 0xb3 Did timeout at ID backup the Disc? 2. L6315 (Front End IC)
DEVICE ERROR (0 x d∗)
1. SRAM
Power supply of SRAM
SRAM error 0 x d1 Cannot access SRAM 2. L6315 (Front End IC)
Is not bus line short-circuiting?
3. L6315-SRAM bus line
FAILSAFE (0 x e∗)
1. software runaway
Unexpected error 0 x e1 Unexpected error
3. Software bug

90 XV-EV51
1 2 3 4
5 6 7 8

7.1.3 TRUBLE SHOOTNG


Confirm the error history at first.
When a history was not displayed, refer to the following table.
A
Defectiveness Assumption
No. Symptoms Diagnosis Contents
Points
Cannot power on Check Voltage of CN8901-17pin(VE+56) on the AF assy. M-EV51(21) , system cable
connection
Check the stand by indicator. If the indicator brinking , AMP PROTECT , DVD POWER
the protect circuit working. (Stand by indicator brinking) SUPPLY
1 Check IC5501-4pin(AC PULSE). M-EV51(21) , system cable
connection
U-COM
Check IC5501-12pin,13pin (CF1,CF2)

B
Standby indicator brinking Check IC5501-17pin(VDET) is 3.5V 1.Connection of DVDIF assy & IF
(DVD ERR) assy.
2.DVD power supply,
3.M-EV51(21) POWER SUPPLY

2 Standby indicator brinking Check FAN connect in M-EV51(21). M-EV51(21) , system cable
(AMP ERR) connection
Check FAN connect in M-EV51(21). M-EV51(21) , system cable
connection
Check IC3301,IC3401 in AMP module. M-EV51(21) , system cable
connection
Check connection AF assy & IF assy. AF ASSY & IF ASSY C
Audio is not out put
3 DSP ASSY
Check signal waveform of CN8751 1,3,5,7,9,11pin
(C,SW,LS,RS,FL,FR) at DOLBY PROLOGIC mode.
Check signal waveform at CN8701-all pin., AF ASSY
CN8751-13,15pin(ANAL,ANAR)
VIDEO no out put Are the signals output from IC11-pin 9, 8 and 7 on the FLKB Assy ? IF assy & DVD IF assy
4 (around 0-3V) connection.
DVD IF ASSY

XV-EV51 91
5 6 7 8
1 2 3 4

Defectiveness Assumption
No. Symptoms Diagnosis Contents
Points
Cannot open a tray Does voltage of CN9-pin 3 and 5 on the DVDM Assy change normally ?
A (An opening screen is pin 3 (XCLOSE) : It is "H" level by the state that has finished doing CLOSE. Tray switch
displayed on the monitor) pin 5 (OPEN) : It is "H" level by the state that has finished doing OPEN.
Does LOAD_DRV signal come ? BACK END IC (DVDM IC601)
Is a signal output from IC351-pin 14 and 15 (CN9-pin 1 and 2) on the DVDM
Assy ? FTS Driver IC
4 (pin 15 : It is about 6V during tray opening, It is about 0V during tray closing) (DVDM IC351)
(pin 14 : It is about 0V during tray opening, It is about 6V during tray closing)

Are not there wire rod coming out, damage the connectors of CN9 and
Connector / wire rod
CN5 on the DVDM Assy ?
Does voltage of CN5-pin 1 on the DVDM Assy change when pressed
Inside switch
the inside switch ?
B Cannot playback Are the signals output from IC351-pin 9 and 10 on the DVDM Assy ? FTS Driver IC (DVDM IC351)
(Focus does not inn)
Does 650 LD emit light ?
Does a pickup lens do up / down ? Pickup
Does not an actuator spring bend ?
Are not resin part damage, a shaft missing ?
5 Mechanism Assy
Are not there falling off of turn table, lean abnormality ?
Is not flexible cable of CN7 on the DVDM Assy coming off and
Flexible cable / connector
damaged ?
Is signal output from IC301-pin 123 (FACT) on the DVDM Assy ?
FRONT END IC
(Device control of around 500 mV is output usually. It is ± around 100
(DVDM IC301)
mV swing by focus up / down.)
Cannot playback Are the signals output from IC251-pin 2 (A3), pin 4 (A2) and pin 7 (A1)
C (Spindle does not turn) on the DVDM Assy ? Spindle Driver IC
It is fixed, and is not there pin 18 HIGH whethere it is fixed, and there is (DVDM IC251)
not pin 23 LOW ?
6 Are not there part falling off, alien substance adhesion in spindle motor
Mechanism Assy (Spindle motor)
part ?
Is not flexible cable of CN7 on the DVDM Assy coming off and
Flexible cable / connector
damaged ?
Is signal output from IC301-pin 123 (SPDL_PDM) on the DVDM Assy ? FRONT END IC (DVDM IC301)
Cannot playback Does not 650nm LD deteriorate ?
(Playback stops) 650nm LD deteriorates.
If there is the both ends voltage of R121 on the DVDM Assy more than
(Cannot playback DVD)
0.7V, 650nm LD deteriorates surely.
D Does not 780nm LD deteriorate ?
780nm LD deteriorates.
7 If there is the both ends voltage of R123 on the DVDM Assy more than
(Cannot playback CD)
1.2V, 780nm LD deteriorates surely.
FG output : Spindle Driver IC
Is not there abnormality in FG waveform ?
(DVDM IC251)
Are not there scratch and a dirt on the disc ? Disc
Picture disturbance during
playback Are not there scratch and a dirt on the disc ?
8 Disc
(block noise, freeze, other) Do not you set a disc of standard outside ?

Audio is not output Check the waveform (BCK, LRCK, MCLK, DATA). BACK END IC (DVDM IC601)
9 (Picture is normal)
Is signal output from IC711-pin 7 and 8 on the JCKB Assy ? AUDIO DAC IC (JCKB IC711)

92 XV-EV51
1 2 3 4
5 6 7 8

EVA emergency processing specification


A
1. About Emergency process
When abnormality of hardware of power supply short circuits and so on occurred, turn the power OFF
without an usual step in a moment. And perform process to limit the later power ON operation.

2. Category of error to perform the Emergency process


As for the error to perform the Emergency process, there are two kinds of the following.
• PROTECT error: Error by power supply of the amplifier section and abnormality of the fan
Overcurrent detection of amplifier
DC voltage detection of amplifier
Fan open and lock detection
Abnormal detection of 8V and 15V

• DVD error: Error by power-failure in the DVD module


B
3. Condition to enter Emergency process
• PROTECT error: When PROTECT port (pin 92) of the microcomputer was L more than 90 mS (less than
0.15VDD +0.4V).
• DVD error: When 3.3DET port (pin 17) of the microcomputer was more than 90mS, and were less than 2.5V
or more than 4.25V.
* Do not perform the error detection during 1.5 seconds after the power ON operation start at both ports.

4. State after the power OFF


STANDBY LED flashes in case of both of PROTECT and DVD errors

5. Possibility or no of re-power ON
• PROTECT error: Power ON is once again possible after the power OFF 60 seconds later.
Indicates "POW ERR" instead of "WELCOME" in this time.
* When pulled the AC power cord out after the power OFF within 60 seconds, cannot turn the power ON for 60 C
seconds after inserting the AC power cord once again.
* Flash of STANBY LED is continued even if it passes after the power OFF for 60 seconds.

• DVD error: Power ON is once again possible after the power OFF 60 seconds later.
Indicates "DVD ERR" instead of "WELCOME" in this time.
* When pulled the AC power cord out after the power OFF within 60 seconds, cannot turn the power ON for 60
seconds after inserting the AC power cord once again.
* Flash of STANBY LED is continued even if it passes after the power OFF for 60 seconds.

6. Recovery method of within 60 seconds after PROTECT error, and after DVD error
When turn the power ON once again after turning the power OFF within 60 seconds in the PROTECT error, and
after turned the power OFF in the DVD error, it is necessary to start with the test mode.
To enter the Test mode, turn the power on while short-circuiting with TEST jumper (W284) and VE+5 jumper
(W282) on the IF Assy. D
Indicate with "U-TEST" in this time.

In addition, RAM of the microcomputer is reset to the factory shipping state when releasing the service test
mode with the power OFF. Then power ON can normally from the next time.
(When error is left, enter the Emergency process once again.)

Protection circuit
1 Diagnosis method when the protection circuit turned to OFF at normal connection (MEDIA-AMP)

When enter the individual operation


mode, a protection circuit does not work.
E

2 The release method that "power cannot turn on for 60 seconds"

Enter the test mode by supplying AC power


(or DC power in the individual operation) while
short-circuiting the jumpers with "TEST" indication
on the IF ASSY, waiting for 60 seconds is released.
Be because the microcomputer was reset then.

XV-EV51 93
5 6 7 8
1 2 3 4

7 SINGLE OPERATION METHOD


A
Individual operation method of XV-EV51,EV21 (MEDIA)

Jigs and Measuring instruments

V A

B
DC power-
supply

Single purpose operation method.


1 Supply DC power to each point, and all the divided GND short-circuits.

DC apply point

Voltage Locations Apply Point Name Assy Name


1 8V W497 IC5508 IN IF Assy
C
2 8V W264 V+8V IF Assy
3 16V C8902 + side VU+12V AF Assy

IGND short circuit point

Locations GND Name Assy Name


1 CN8901 16PIN GNDD AF ASSY
2 W132 GNDA AF ASSY
3 W395 GNDM IF ASSY
D

2 Supply a DC power while short-circuiting the jumpers (W282 and W285) with "SERVICE" indication on the IF Assy.

TEST MODE : STOP → CANCEL

DC power-
IF ASSY supply
ST. M

V A
EM

DC Output (+8.0V)
OR

·S
E
Y

TO
P 7
Power SW
+8.0V
off
GND
STOP The DC power supply
All Operations (+8.0V) is turned off.

94 XV-EV51
1 2 3 4
5 6 7 8

7.1.4 SEQUENCE AFTER POWER ON

Flow chart from power on to the picture output


A

STANDBY

Power on operation by a user Spindle turn


(remote controller key or product key)

Read ID information code


FL controller receives a message

Various setting B
[FL controller]
LCD lighting / outputs a power on signal
(POWER ON: "L"→"H") The picture output

[FL controller]
Release the reset for BACK END
(XRESET: "L"→"H")

[BACK END] C
Accesses flash ROM and 64M SDRAM

[BACK END]
Accesses FRON END

[BACK END]
Request communication to the FL
controller (FP_ACK)
D

[FL controller]
Outputs the signal which can
communicate to BACK END (FP_XRDY)

BACK END – FL controller


communication

The opening picture output E

[FRONT END]
Identifies the following:
• Slider positioning (INSIDE SW)
• Spindle FG stop

Disc detection (Focus control)


F

XV-EV51 95
5 6 7 8
1 2 3 4

7.1.5 DISASSEMBLY
1 Deck Mechanism Section 2 Front Panel Section
A 1 Remove the Side Bonnet L and R (screws × 14) 1 Remove two screws
2 Remove two screws 2 Remove a FFC and connector

2 2 3 Unhook × 4
4 Remove the Front Panel Section

AF Assy

B
CN8301
2

IF Assy
2

CN5509

Rear View

3 Release two binders


4 Remove the earth lead wire (screw × 1)

5 Remove the Deck Mechanism Section


(FFC × 1, connectors × 2)

Deck Mechanism Section

5
D

4
5
CN5802
3
Earth
5 3 3
Lead
Wire CN2302
5
E
4 CN2301

3 3

1
1
IF Assy DECK Assy Note : Front Panel can removes with the state which
Tray Panel was attached to it.
Note : Operation check of the main unit is possible In this time, remove bottom part of the Front Panel
even if removes the Deck Mechanism Section. first so that the Tray Panel is not caught.

96 XV-EV51
1 2 3 4
5 6 7 8

3 DVD Mechanism Section


1 Remove three screws 5 Remove four screws
A
5 Top View 5
Rear View

1 1 1
C

5 DVD Mechanism Section 5

2 Remove a screw 6 Remove the DVDM and DVD IF Assys (screws × 6)


3 Remove a Fan connector (with Shield Plate and Plastic Plate)

4 Remove the DVD Shield Section Caution : Be careful to installation order of


the Shield Plate and Plastic Plate.
Shield Plate and Plastic Plate
DVDM Assy D
5 5 ×2

5
5 ×3
4
3
CN5510

2 E

DVD Shield

DVD Mechanism Section


DVD IF Assy

Bottom View

XV-EV51 97
5 6 7 8
1 2 3 4

7 Styling like figure below.

A DECK Assy

AF Assy
Rear View
DVD IF Assy Turn the Pickup Short SW
before Pickup Flexible Cable removed.

DVDM Assy

Short
B

DSP Assy
(XV-EV51 Only) " before Pickup Flexible cable removed
make short by solder "
IF Assy

LOADING MECHA Assy

Diagnosis

D 4 Tray
1 Remove the Bridge (screw ×1).
2 Pull out the Tray and remove it while unhooking a hook.
Caution in the Tray Insertion
2 -1 1 -1 In the Tray insertion, insert it after matching a triangle mark
of the Loading Base and a position of pin of the Drive Cam.
1 -2
Triangle Mark Loading Base
Hook

2 -2
Pin Drive Cam

98 XV-EV51
1 2 3 4
5 6 7 8

5 Traverse Mechanism Assy-S When Removing The Pickup Assy-S

1 Remove the FFC Holder with the state which Flexible Cable 3 Remove two Skew Screws and two Skew Springs
was atatched. (Screw × 1) A
Cautions :
4 Remove the Pickup Assy-s
Screw is locked with Silicone Adhesive.
Please lock it with Silicone Adhesive when installs it.
Silicone 4
1 -1 Adhesuve 3
Traverse Mechanism Assy-S GEM1037 Pickup Assy-S
Skew
Screw
3
Skew Skew
Spring
Skew Screw
1 -2
Spring
B

FFC Holder

Bottom View C

2 Remove the Pickup Flexible Cable

Pickup Assy-S

5 Remove two Screws


Cautions :
Screw is locked with Silicone Adhesive.
Please lock it with Silicone Adhesive when installs it.

3 Unhook ( × 4) D
4 Remove the Traverse Mechanism Assy-S
5 Silicone Adhesive
GEM1037
Slider
3 ×2
Hold Spring
4

2
E
Pickup Assy-S

Joint
3 ×2 Traverse Mechanism Assy-S Silicone Adhesive
5 GEM1037

XV-EV51 99
5 6 7 8
1 2 3 4

STYLING THE PICKUP FLEXIBLE CABLE

A
1 FOLD a edge of lining part of the Pickup Flexible Cable.

2 Insert the Pickup Flexible Cable in connector, and lock it surely.

Pickup Assy-S

B
2 7
1
8

Bottom View

Conducting Plane FFC Holder


Caution :
Move the Pickup to the innermost of the disc

C
3 Perform the styling as shown in figure below. 10 Lose slack

Fold position of step 6

D
1
Bottom View
2
3 Bottom View

Fold at the position


of reference line. 6 Reference line

11

55

4 12

Bottom View

Bottom View
F

100 XV-EV51
1 2 3 4
5 6 7 8

7.2 PARTS
• The information shown in the list is basic information and may not correspond exactly to that shown in the schematic diagrams.
List of IC A
BA6664FM, L6315ATXXTY, M56788AFP, STI5519AVB-B0C, PCM1742KE, MM1567AJ, PDC093

BA6664FM (DVDM ASSY : IC251)


• Spindle Driver
Block Diagram

A3 2 DRIVER 28 RNF
27 VM B
TSD
A2 4 GAIN
GAIN 26 GSW
CONTROL SWITCH
A1 7 Vcc
CURRENT 25 VCC
SENSE AMP
TL
24 FG
HALL AMP TORQUE
GND 8 PS 23 PS

SENSE AMP
H1+ 9 22 EC

H1- 10 Vcc 21 ECR C


Vcc

H2+ 11 20 FR

H2- 12 R 19 FG2
D Q
SHORT BRAKE 18 SB
CK Q
H3+ 13
17 CNF

H3- 14 BRAKE MODE 16 BR

HALL BIAS 15 VH D

Pin Function
No. Pin Name Pin Function No. Pin Name Pin Function
1 N.C. N.C. 16 BR Brake mode switching pin
2 A3 Output pin 17 CNF Capacitor connection pin for phase compensation
3 N.C. N.C. 18 SB Short brake pin
4 A2 Output pin 19 FG2 FG 3-phase mix signal output pin
5 N.C. N.C. 20 FR Rotation detecting pin
E
6 N.C. N.C. 21 ECR Control reference pin of output voltage
7 A1 Output pin 22 EC Output voltage control pin
8 GND GND pin 23 PS Power save pin
9 H1+ 24 FG FG signal output pin
10 H1- 25 VCC Power supply pin
11 H2+ 26 GSW Gain switching pin
Hall signal input pins
12 H2- 27 VM Motor power pin
13 H3+ 28 RNF Resistor connection pin for output current detection
14 H3- FIN FIN GND
F
15 VH Hall bias pin

XV-EV51 101
5 6 7 8
1 2 3 4

L6315ATXXTY (DVDM ASSY : IC301)


• Front End IC
A Block Diagram

102 XV-EV51
1 2 3 4
5 6 7 8

Pin Function
No. Pin Name I/O Pin Function
1 IREF Analog input Bandgap filtering input A
2 GNDAI Analog ground Analog power supply ground
3 RFSACD Analog output RF output for SA-CD support
4 RFIN Analog input RF path data input (after AC coupling)
5 RFOUT Analog output RF path data output (before AC coupling)
6 VCCA18 Analog supply Input stage power supply
7 TST_ADC Analog output RF path analog test pin
8 TST_SLICE Analog output PM analog test pin
9 TST_PM Analog output PM analog test pin
10 A Analog input Input stages laser diode A
B
11 GNDMN Analog ground Input stages ground main
12 B Analog input Input stages laser diode B
13 VCC33MN Analog supply Input stages 3.3 V misc.
14 REFD Analog output Reference voltage for pickup
15 VCC18IS Analog supply Input stages 1.8 V main
16 D Analog input Input stages laser diode D
17 VCCA18IS Analog supply Input stages 1.8 V misc.
18 C Analog input Input stages laser diode C
19 VCC33IS Analog supply Input stages 3.3 V misc.
C
20 GNDAIS Analog ground Input stages ground misc.
21 VCC33SD Analog supply Input stages 3.3 V side
22 VCC18SD Analog supply Input stages 1.8 V side
23 GNDSD Analog ground Input stages ground side
24 F Analog input Input stages laser diode F
25 E Analog input Input stages laser diode E
26 VSHIELIS Analog ground IS shield
27 VDDADC Analog supply ADC digital power supply
28 VSSADC Analog ground ADC digital ground supply
29 VCCADC Analog supply ADC analog power supply D

30 GNDADC Analog ground ADC analog ground supply


31 VSHIELDADC Analog ground ADC shield
32 NC − −
33 BOOT_MODE Digital input Boot mode
34 VSS Digital ground VSS I/O
35 VDD3 Digital supply VDD I/O (3.3 V)
36 PC[0] (NC) Digital I/O −
37 PC[1] (PS) Digital I/O Driver IC power save
38 PC[2] (FG) Digital I/O FG pulse input E
39 PC[3] (SB) Digital I/O Spindle short brake
40 PC[4] (SLDPOS) Digital I/O Slider position input

XV-EV51 103
5 6 7 8
1 2 3 4

No. Pin Name I/O Pin Function


41 PC[5] (VROFST) Digital I/O VREF offset adjustment (stand-by)
A 42 PC[6] (SPDL_PDM) Digital I/O Spindle drive output
43 PC[7] (OEICG) Digital I/O OEIC gain sw
44 VSS Digital ground VSS core
45 VDD3S Digital supply VDD core
46 VSS_SPL Digital ground VSS I/O
47 RAM_DQM Digital output SDRAM DQM
48 RAM_WEN Digital output RAM write enable
49 RAM_CASN / Sradr14
50 RAM_RASN / Sradr15

B 51 RAM_A[13]
52 RAM_A[12]
53 RAM_A[11]
54 RAM_A[10]
55 RAM_A[0]
56 RAM_A[1]
57 RAM_A[2] Digital output SRAM address
58 RAM_A[3]
59 RAM_A[4]
60 RAM_A[5]
C
61 RAM_A[6]
62 RAM_A[7]
63 RAM_A[8]
64 RAM_A[9]
65 RAM_CLK / Sradr16
66 VDD_SPL Digital supply VDD I/O
67 VDD3 Digital supply VDD I/O
68 VSS Digital ground VSS I/O
69 RAM_DQ[0]
D
70 RAM_DQ[1]
71 RAM_DQ[2]
72 RAM_DQ[3]
Digital I/O SRAM data
73 RAM_DQ[4]
74 RAM_DQ[5]
75 RAM_DQ[6]
76 RAM_DQ[7]
77 VDD3S Digital supply VDD core
78 VSS Digital ground VSS core
E 79 OUT_REQ Reserved Must be set to ground
80 OUT_ERR Digital output Output interface

104 XV-EV51
1 2 3 4
5 6 7 8

No. Pin Name I/O Pin Function


81 OUT_SYNC Digital output Output interface
82 OUT_DVALID Digital output Output interface A
83 OUT_CLK Digital output Output interface
84 OUT_DATA[0] (FE_DATA) Digital output Output interface
85 OUT_DATA[1] (FE_EVALID) Digital output Output interface: BW com
86 OUT_DATA[2] (FE_ECCBST) Digital output Output interface: BW com
87 OUT_DATA[3]
88 OUT_DATA[4]
89 OUT_DATA[5] Digital output Reserved
90 OUT_DATA[6]
91 OUT_DATA[7] B
92 VDD3 Digital supply VDD I/O
93 VSS Digital ground VSS I/O
94 PE[0] (FE_INIT) Digital I/O FE initialize input
95 PE[1] (NC) Digital I/O −
96 PE[2] (DMA) Digital I/O DMA input
97 PE[3] (SCL) Digital I/O I2C clock input
98 PE[4] (SDA) Digital I/O I2C data input
99 PD[0] (NC) Digital I/O −
100 PD[1] (NC) Digital I/O −
C
101 PD[2] (NC) Digital I/O −
102 PD[3] (NC) Digital I/O −
103 PD[4] (NC) Digital I/O −
104 PD[5] (NC) Digital I/O −
105 PD[6] (NC) Digital I/O −
106 PD[7] (NC) Digital I/O −
107 VDD3 Digital supply VDD I/O
108 VSS Digital ground VSS I/O
109 VPP_TEST Digital input Test input
D
110 VCCD_BYP Digital supply VDD core
111 VCCD_OUT − No voltage to be applied
112 VSS Digital ground VSS core
113 VDD3S Digital supply VDD core
114 VSS Digital ground VSS I/O
115 VDD3 Digital supply VDD I/O
116 RESET_IN Digital input Global reset signal
117 VCC18DAC Analog supply DAC analog power supply
118 STEPER1 Analog output DAC spindle motor
119 STEPER2 Analog output DAC sled motor E

120 REFEXT Analog input DAC external reference

XV-EV51 105
5 6 7 8
1 2 3 4

No. Pin Name I/O Pin Function


121 REFGND Analog ground DAC analog ground supply
A 122 REFDAC Analog output DAC reference voltage
123 FACT Analog output DAC focus actuator
124 TACT Digital output DAC tracking actuator
125 GNDDAC Analog ground DAC analog ground
126 NC − −
127 VCCA33 Analog supply DAC analog power supply
128 NC − −
129 GNDPLL Analog ground PM analog ground
130 PLLOFF Analog input PM reference disable PLL

B 131 FREOUT Analog output PM reference frequency output


132 FREIN Analog input PM reference frequency input
133 VCCPLL Analog supply PM analog power supply
134 SREG1 Analog output External bipolar base
135 VCCR33 Analog supply Analog power supply for regulator
136 SREG2 Analog output External bipolar base
137 LD1 Analog output Laser control laser diode 1
138 LD2 Analog output Laser control laser diode 2
139 VCCA33 Analog supply Analog power supply for input stages +
140 LCREF Analog output Laser control DAC reference
C
141 LMD1 Analog input Laser control monitor diode 1
142 LMD2 Analog input Laser control monitor diode 2
143 GNDL Analog ground Ground for laser control detection
144 VBGFILT Analog input Bandgap filtering input

106 XV-EV51
1 2 3 4
5 6 7 8

M56788AFP (DVDM ASSY : IC351)


• FTS Driver IC
A
Block Diagram

XV-EV51 107
5 6 7 8
1 2 3 4

STI5519AVB-B0C (DVDM ASSY : IC601)


• Back End IC
A Block Diagram

108 XV-EV51
1 2 3 4
5 6 7 8

Pin Function
No. Pin Name I/O Pin Function
1 FP_SO OUT Front Panel interface. (Soft) Serial transfer data output. A
2 A_DATA3 OUT Reserved
3 XAMUTE OUT Analog audio output line muteing output 'L'.
4 VDD_3V3 − 3.3 V Power supply
5 VSS − Ground
Reserved
6 AQE_XCS OUT
Audio Quality Enhancer IC's chip-select output.
7 SQUEEZ OUT S-Video output S1/S2 control signal at squeez output mode 'H'.
S-Video output S1/S2 control signal & EURO(SCART) connecter (FUNCTION SWITCHING) signal at
8 LETTER OUT
letter-box output mode 'H'.
TRYPOS OUT In case of NOT carusel 5 disc changer, this port is N.C.(output) B
9 Carousel 5 Disc Chenger only
TRYPOS IN Tray rotete puls input.
Capture function can be used.
For EURO(SCART) connecter (BLINKING) signal
10 V_SEL1 OUT
'L' : RGB output disable 'H' : RGB output enable
11 RTS OUT UART(RS-232C) Request To Send signal output.
For EURO(SCART) connecter V/Y, R/C signal select
12 V_SEL2 OUT
'L' : VRGB output = VRGB 'H' : VRGB output = YCGB
13 CTS IN UART(RS-232C) Clear To Send signal input.
14 VDD_2V5 − 2.5 V Power supply
15 VSS − Ground C
Front-End L6315 stream interface.
16 FE_DATA IN
Searial data input.
Front-End L6315 stream interface.
17 FE_BCLK IN
Searial clock input.
Front-End L6315 stream interface.
18 FE_DVALID IN
Data valid flag input.
Front-End L6315 stream interface.
19 FE_SYNC IN
Searial synchronize flag input.
Front-End L6315 stream interface.
20 FE_EVALID IN
If STi5588 then RS-SPLIT error valid flag.
Front-End L6315 stream interface.
21 FE_ECCBST IN D
If STi5588 then RS-SPLIT ECC Block Start flag.
22 TP- ( VQE_XCS ) OUT Reserved
23 VDD_RGB − RGB circuit 2.5 V Power supply
24 VSS_RGB − RGB circuit Ground
25 B_OUT OUT B / Cb
26 G_OUT OUT G/Y
27 RC_OUT OUT R / Cr
28 VREF_RGB IN RGB DAC reference
29 IREF_RGB IN RGB DAC electric current reference
30 VDD/YCC − YC circuit 2.5 V Power supply E

31 VSS_YCC − YC circuit Ground


32 Y_OUT OUT Y
33 C_OUT OUT C
34 CV_OUT OUT CV
35 VREF_YC IN YCC DAC reference

XV-EV51 109
5 6 7 8
1 2 3 4

No. Pin Name I/O Pin Function


36 IREF_YC IN YCC DAC electric current reference
A 37 VDD_2V5 − 2.5 V Power supply
38 VSS − Ground
In case of NOT Karaoke model,
this port is N.C.(output).
39 XAMUTE2 OUT
Karaoke model
Before MIC mixing stage audio muteing output 'L'.
In case of NOT Karaoke model,
this port is N.C.(output).
40 MIC_XON1 OUT
Karaoke model
MIC mixing chanel control output.
In case of NOT Karaoke model,
OUT
this port is N.C.(output).
B MIC_ON2 : MIC_ON1 : mode
41 MIC_XON2 0 0 : Don't use.
OUT 0 1 : Mix to Center Speaker
1 0 : Mix to main L/R channel
1 1 : OFF
42 TP-x OUT Reserved
In case of NOT carusel 5 disc changer,
OUT
this port is N.C.(output)
43 CLAMP
Carousel 5 Disc Chenger only.
IN
'H' show disc clampe complete postion.
In case of NOT carusel 5 disc changer,
OUT
this port is N.C.(output)
44 XUNCLAMP
C Carousel 5 Disc Chenger only.
IN
'H' show disc un-clampe complete postion.
45 KDSP_RST OUT Reserved
In case of NOT Karaoke model,
this port is N.C.(output)
46 44X48 OUT
Karaoke model
KARAOKE-DSP master clock 1/2 mode 'L'.
47 VDD3V3 − 3.3 V Power supply
48 VDD_PCM − 2.5 V Power supply
49 VSS_PCM − Ground
50 VSS − Ground
D
51 A_BCK OUT Audio DAC clock
52 A_DATA0 OUT Audio DAC Front L,R data
53 A_DATA1 OUT Audio DAC Center, LFE data
54 A_DATA2 OUT Audio DAC Surround L,R data
55 A_MCLK OUT Audio DAC Master clock
56 A_LRCK OUT Audio DAC L/R clock
57 DOUT OUT S/PDIF(IEC60958) digital audio output.
58 SMI_A4
59 SMI_A5
E
60 SMI_A6
OUT SMI SDRAM addresss
61 SMI_A7
62 SMI_A8
63 SMI_A9
64 VDD_2V4 − 2.5 V Power supply

110 XV-EV51
1 2 3 4
5 6 7 8

No. Pin Name I/O Pin Function


65 VSS − Ground
66 SMI_A3 A
67 SMI_A2
68 SMI_A1
69 SMI_A0
OUT SMI SDRAM address
70 SMI_A10
71 SMI_A11
72 SMI_A12
73 SMI_A13
74 SMI_CS0 OUT SMI SDRAM chip select
75 SMI_CS1 OUT 2nd SMI SDRAM chip select B
76 SMI_RAS OUT SMI SDRAM RAS
77 SMI_CAS OUT SMI SDRAM CAS
78 SMI_WE OUT SMI SDRAM Write Enable
79 SMI_DQML OUT SMI SDRAM Lower DQM
80 SMI_DQMU OUT SMI SDRAM Upper DQM
81 VDD_3V3 − 3.3 V Power supply
82 SMI_CLK IN SDRAM clock input.
83 VSS − Ground
84 SMI_D0
C
85 SMI_D1
86 SMI_D2
87 SMI_D3
88 SMI_D4
I/O SMI SDRAM data
89 SMI_D5
90 SMI_D6
91 SMI_D7
92 SMI_D8
93 SMI_D9
D
94 VDD_2V5 − 2.5 V Power supply
95 SMI_CLK OUT SDRAM clock output.
96 VSS − Ground
97 SMI_D10
98 SMI_D11
99 SMI_D12
I/O SMI SDRAM data
100 SMI_D13
101 SMI_D14
102 SMI_D15
In case of NOT Karaoke model, E
this port is N.C.(output).
103 KDSP_XCS OUT
Karaoke model
Exteranal DSP chip select 'L'.
In case of NOT Karaoke model,
this port is N.C.(output).
104 KDSP_THRU OUT
Karaoke model
Exteranal DSP through pass mode 'L'.

XV-EV51 111
5 6 7 8
1 2 3 4

No. Pin Name I/O Pin Function


Reserved
105 LFEON OUT
for high-quality audio model's LFE control.
A
106 TP- OUT Not use.
107 VDD_3V3 − 3.3 V Power supply
108 VSS − Ground
109 TRST Diagnostic Controle Unit interface
110 TMS Diagnostic Controle Unit interface
111 TDTO Diagnostic Controle Unit interface
112 TDTI Diagnostic Controle Unit interface
113 TCK Diagnostic Controle Unit interface

114 ROTDRV OUT Carousel 5 disc changer model Tray rotation drive PWM output.
B
Boot select
115 B_F_ROM IN 'L' : Boot from DCU. 'H' : Boot form ROM.

116 LOAD_DRV OUT Tray Open/Close drive PWM output (SINGL & CAROUSEL)

117 CPU_OE OUT 8M / 16M bits FLASH memory for firmware.


118 CPU_SDCK OUT 64M bits SDRAM for debugging firmware .
119 VDD_2V5 − 2.5 V Power supply
120 CLK27M IN Master 27MHz system clock input.
121 VSS − Ground
C
122 VDD_PLL − Clock PLL circuit 2.5 V Power supply
123 VSS_PLL − Clock PLL circuit Ground
124 RESET IN Power ON system RESET signal 'L' input.
In case of NOT carusel 5 disc changer,
this port is N.C.(input).
125 DISC_SNS IN Carousel 5 disc changer model
Disc sense input.
Pull up resistor is in another changer board.

126 FP_XRDY IN Front Panel interface. Hand-shake(request) input.

Front-End L6315
127 FE_INT IN
D Interrupt request input.
Flash memory write enable
128 SD_DQML OUT
'L'. Debug SDRAM Lower DQM.
129 SD_DQMU OUT Debug SDRAM Upper DQM
130 SD_RXW Debug SDRAM Read/~Write
131 CPU_WAIT OUT CPU wait 'H' input
132 CE3 OUT Flash memory Chip Eenable 'L'
133 − OUT TP-x
134 − OUT TP-x
135 SD_XRAS OUT Debug SDRAM RAS 'L'
E 136 VDD_3V3 − 3.3V Vdd
137 VSS − GND
138 − OUT TP-x
139 SD_XCAS OUT Debug SDRAM CAS 'L'
140 SD_XCS OUT Debug SDRAM Chip Select 'L'

112 XV-EV51
1 2 3 4
5 6 7 8

No. Pin Name I/O Pin Function


141 CPU_D0
142 CPU_D1 A
143 CPU_D2
144 CPU_D3
I/O FLASH, Debug SDRAM DATA
145 CPU_D4
146 CPU_D5
147 CPU_D6
148 CPU_D7
149 VDD_2V5 − 2.5 V Power supply
150 VSS − Ground
151 CPU_D8 B
152 CPU_D9
153 CPU_D10
154 CPU_D11
I/O FLASH, Debug SDRAM DATA
155 CPU_D12
156 CPU_D13
157 CPU_D14
158 CPU_D15
159 VDD_3V3 − 3.3 V Power supply
160 VSS − Ground
C
161 CPU_A1
162 CPU_A2
163 CPU_A3
164 CPU_A4
165 CPU_A5
OUT FLASH, Debug SDRAM address
166 CPU_A6
167 CPU_A7
168 CPU_A8
169 CPU_A9
D
170 CPU_A10
171 VDD_2V5 − 2.5 V Power supply
172 VSS − Ground
173 CPU_A11
174 CPU_A12
175 CPU_A13
176 CPU_A14
177 CPU_A15
178 CPU_A16 OUT FLASH, Debug SDRAM address
179 CPU_A17 E

180 CPU_A18
181 CPU_A19
182 CPU_A20
183 CPU_A21
184 VDD_3V3 − 3.3 V Power supply

XV-EV51 113
5 6 7 8
1 2 3 4

No. Pin Name I/O Pin Function


185 VSS − Ground
A 186 XDRVMUTE OUT Motor driver muting signal 'L'.
Front-End L6315 stream interface.
187 RS_ERROR IN
If STi5588 then ECC Error flag.
Reserved
(Front-End L6315 command interface.)
188 I2C_SEL OUT
('L' : I2C bus connect to I2C_DMA)
('H' : I2C bus connect to I2C_COMAND)
189 DAC_SCK OUT Audio DAC serial control clock output.
190 DAC_SO OUT Audio DAC serial control data output.
191 DAC_XCS0 OUT Audio DAC serial control chip select output.
192 DAC_XCS1 OUT Reserved (Audio DAC serial control chip select output. For addition DAC)
B In case of NOT 6ch audio output model,
this port is N.C.(output).
193 6CH_MODE OUT
6ch audio output model
Audio quality up control signal output.
Front-End L6315 command interface
194 SDA SDA
I2C bus serial data line.
Front-End L6315 command interface
195 SCL SCL
I2C bus serial clock line.
Front-End L6315
196 FE_RST OUT
Hard reset output.
197 TXD TXD UART(RS-232C) data output
198 VDD_2V5 2.5 V Power supply
C
199 VSS IN Ground
200 RXD RXD UART(RS-232C) data input
201 TP-x OUT Reserved
202 TRIGIN − Diagnostic Controle Unit interface
203 TRIGOUT − Diagnostic Controle Unit interface
204 OPEN IN 'H' show tray loading "OPEN" complete position.
205 XCLOSE IN 'H' show tray loading "CLOSE" complete position.
Front Panel interface.
206 FP_ACK OUT
Hand-shake (acknowledge) output.
D Front Panel interface.
207 FP_SCK OUT
(Soft) Serial transfer clock output.
Front Panel interface.
208 FP_SI IN
(Soft) Serial transfer data input.

114 XV-EV51
1 2 3 4
5 6 7 8

PCM1742KE (DVD IF ASSY : IC1921)


• D/A Converter
A
Pin Arrangement Pin Function
No. Pin Name I/O Pin Function
1 BCK I Audio data bit clock input
1 BCK SCK 16 2 DATA I Audio data digital input
L-channel and R-channel Audio data
3 LRCK I
2 DATA ML 15 latch enable input
4 DGND − Digital ground
3 LRCK MC 14 5 VDD − Digital power supply +3.3V
6 VCC − Analog power supply +5V
4 DGND MD 13 7 VOUTL O Analog output for L-channel
8 VOUTR O Analog output for R-channel
B
5 VDD ZEROL/NA 12 9 AGND − Analog ground
10 VCOM − Common voltage decoupling
6 VCC ZEROR/ZEROA 11 Zero flag output for R-channel / Zero
11 ZEROR/ZEROA O
flag output for L/R-channel
7 VOUTL VCOM 10 Zero flag output for L-channel / No
12 ZEROL/NA O
assign
8 VOUTR AGND 9 13 MD I Mode control data input
14 MC I Mode control clock input
15 ML I Mode control latch input
16 SCK I System clock input

Block Diagram

BCK 1
LRCK 3 Audio 7 VOUTL
Serial
Port Output Amp and
DAC Low-pass Filter
DATA 2
4× / 8×
Oversampling Enhanced
Digital Filter D
Multi-level 10 VCOM
with Delta-Sigma
Function Modulator
Controller
ML 15
Serial
Control
MC 14 Port Output Amp and
DAC Low-pass Filter
8 VOUTR
MD 13

System Clock
E
System Clock Zero Detect Power Supply
SCK 16 Manager

12 11 5 9 6 8
ZEROL/NA

ZEROR/ZEROA

VDD
DGND

VCC
AGND

XV-EV51 115
5 6 7 8
1 2 3 4

MM1567AJ (DVD IF ASSY : IC1941)


• DVD Video Amp. IC
A Block Diagram

Pin Function
No. Pin Name Pin Function No. Pin Name Pin Function
1 VCC1 VCC 18 CrOUT Signal output (Cr)
2 CIN Crroma input 19 CrSAG SAG correction (Cr)
D 3 MUTE1 Mute select 20 GND2 GND
4 VIN Video input 21 CbOUT Signal output (Cb)
5 YC MIX YC MIX select 22 CbSAG SAG correction (Cb)
6 YIN Video input (Y) 23 GND2 GND
7 BIAS Bias 24 CYOUT Signal output (CY)
8 GND1 GND 25 CYSAG SAG correction (CY)
9 NC NC 26 GND2 GND
10 GND1 GND 27 YOUT Signal output (Y)
11 NC NC 28 YSAG SAG correction (Y)
12 CYIN Luminance input 29 GND2 GND

E 13 CLP Input clamp select 30 VOUT Signal output (V)


14 CbIN Component input (Cb) 31 VSAG SAG correction (V)
15 MUTE2 Mute select 32 GND2 GND
16 CrIN Component input (Cr) 33 COUT Chromatic output
17 GND2 GND 34 VCC2 VCC

116 XV-EV51
1 2 3 4
5 6 7 8

PDC093 (IF ASSY : IC5501)


• System Control Microcomputer A

Pin Function
No. Port Name Pin Name I/O Function
1 PA3/WR# DVD ON/OFF O Control power supply for DVD
2 PA4/RD# (HPDET) O Detect to insert headphone (reserve) → If don't use, set I/O to output
3 PA5/RS XCDRST O Reset for CD / VCD / DVD microcomputer
4 P70 / INT0 / T0LCP / AN8 ACPULSE I AC PULSE input
5 P71 / INT1 / T0HCP / AN9 CDERR I ERR and OVER input from CODEC
6 P72 / INT2 / T0IN RDSCLK I Clock input from RDS decoder (without RDS : Low output)
7 P73 / INT3 / T0IN REMOCON I REMOCON signal input
B
8 RES# XRESET I Reset input
9 XT1 / AN10 − −
10 XT2 / AN11 − −
11 VSS1 − −
12 CF1 − −
13 CF2 − −
14 VDD1 − − Power supply
15 P80 / AN0 SIMUKE I Destination setting input
16 P81 / AN1 LEVELIN I Level meter signal input
17 P82 / AN2 3.3DETECT I DVD 3.3V detection input
18 P83 / AN3 KEY4 I Key input (for AMP) C

19 P84 / AN4 ST/TUNE I STEREO tuned detection input


20 P85 / AN5 KEY1 I Key input
21 P86 / AN6 KEY2 I Key input
22 P87 / AN7 KEY3 I Key input
23 P10/SO0 SYS_DOUT O System bus data output (AMP side output)
24 P11 / SI0 / SB0 SYS_DIN I System bus data input (AMP side input)
25 P12 / SCK0 SYS_CLK I System bus clock input
Data output for CODEC + DIR IC, TC9164, EXPAND IC (only for DSP),
26 P13 / SO1 DSPDIN O
CRISTAL's DSP (AMP side output) [DSP core CDDI + CSDI]
Data input for CODEC + DIR IC, TC9164, EXPAND IC (only for DSP), D
27 P14 / SI1 / SB1 DSPDOUT I
CRISTAL's DSP AMP side input) [DSP core CDDO + CSDO]
Clock for CODEC + DIR IC, TC9164, EXPAND IC (only for DSP), CRISTAL's
28 P15 / SCK1 DSPCLK O
DSP [DSP core CDCK + CSCK]
29 P16/T1PWML SYS_CS2 O Chip select 2 for system bus
30 P17/T1PWMH/BUZ SYS_CS1 O Chip select 1 for system bus
31 PE0 TCEXPOE O Output enable to EXPAND IC for deck
32 PE1 TCEXPCLK O Clock to EXPAND IC for deck
33 PE2 TCEXPCE O Chip enable to EXPAND IC for deck
34 PE3 TCEXPDAT O Data to EXPAND IC for deck
35 PE4 TCHALF I Input switch of mecha half
36 PE5 TCMODE I Input switch of mecha mode E
37 PE6 TCRECF I Input switch of mecha during recording forward
38 PE7 TCRECR I Input switch of mecha during recording reverse
39 VSS4 − − Ground
40 VDD4 − − Power supply

XV-EV51 117
5 6 7 8
1 2 3 4

No. Port Name Pin Name I/O Function


41 PF0 TCMSIN I Input MS signal
42 PF1 TCPULSE I Input pulse of TC reel
A
43 PF2 XTESTMODE I Set TEST MODE for product line (service) and unit checker
44 PF3 SERVICE I Set SELF CHECK for service
45 PF4 DTSDMIX O Cntrol of gain-up for dts down-mix
46 PF5 SWFMIX O Control for subwoofer mix
47 PF6 ECHCNT1 O Control of echo level 1
48 PF7 ECHCNT2 O Control of echo level 2
49 SI2P0/SO2 LCDDAT O Data for FL (LCD) driver
50 SI2P1/SI2/SB2 LCDCE O Chip enable for FL (LCD) driver
51 SI2P2/SCK2 LCDCLK O Clock for FL (LCD) driver
52 SI2P3/SCK20 LCDRST O Reset for FL (LCD) driver
B
53 PWM1 − −
54 PWM0 − −
55 VDD2 − − Power supply
56 VSS2 − − Ground
57 P00 TXCE O Chip enable for tuner LSI
58 P01 NC O No connection
59 P02 XTMRLED O Control timer standby LED
60 P03 XSTBYLED O Control standby LED
61 P04 TXCLK O Clock for tuner LSI
62 P05 TXIDAT O Data for tuner LSI
C 63 P06 TXMUTE O Control mute of tuner
64 P07 RDSPOW O Control power supply of RDS
65 P20/INT4/T1IN RDSDATA I Input RDS data
66 P21/INT4/T1IN TXODAT I Input data from tuner LSI
67 P22/INT4/T1IN XDSPMUTE O Control mute of DSP (board)
68 P23/INT4/T1IN A/D MODE O DSP mute when ANALOG
69 P24/INT5/T1IN AUXMUTE O Control mute of AUX output
70 P25/INT5/T1IN DVDLAT I Input latch signal from DVD connection
71 P26/INT5/T1IN ATTCONT O Control ATT of AUX
72 P27/INT5/T1IN KCONSTB O Strobe for Key Control IC
D 73 P30 KCONCLK O Clock for Key Control IC
74 P31 KCONDATA O Data for Key Control IC
75 P32 VOCALC O
76 P33 VOCALB O
77 P34 VOCALA O
78 P35 ASSELB O Audio source select B
79 P36 ASSELA O Audio source select A (CD, TUNER, TAPE, AUX) BU4052
80 PB7/D7 DSP EXP CS O Chip select for EXPAND

118 XV-EV51
1 2 3 4
5 6 7 8

No. Port Name Pin Name I/O Function


81 PB6/D6 DSP EXP OE O Output enable for EXPAND (no use)
82 PB5/D5 CSCS O Chip select for CRISTAL's DSP A
83 PB4/D4 CSREQ I Request for CRISTAL's DSP
84 PB3/D3 FS96 I 96k input fron CODEC
85 PB2/D2 ABOOT O Chip select for SRAM / P2ROM
86 PB1/D1 CSRST O RESET for CRISTAL's DSP
87 PB0/D0 CDCS O Chip select for CODEC
88 VSS3 − − Ground
89 VDD3 − − Power supply
90 PC7/A7 CDPDN O Power down (RESET) for CODEC
91 PC6/A6 SYSPOW O Control power supply of system
92 PC5/A5 PROTECT I Protection and Fan Error detection input
B
93 PC4/A4 SPCONT O Control relay of speaker output
94 PC3/A3 SYSMUTE O Control mute of system
95 PC2/A2 VOLCE O Chip enable for E-vol IC
96 PC1/A1 VOLCLK O Clock for E-vol IC
97 PC0/A0 VOLDATA O Data for E-vol IC
98 PA0/CS2# FLASH E/D − for FLASH writing
99 PA1/CS1# FLASH DO − for FLASH writing
100 PA2/CS0# FLASH CLK − for FLASH writing
• Port 0 (P00-P07) can be selected for input or output by each 4 bits (P00-P03, P04-P07).
Set for input when reset. And it can be set C-MOS or Nch-OD by each 1 bit in option.
• Port 1 (P10-P17) can be selected for input or output by each 1 bit. Set for input when reset. C
And it can be set C-MOS or Nch-OD by each 1bit in option.
• Port 2 (P20-P27) can be selected for input or output by each 1 bit. Set for input when reset.
And it can be set C-MOS or Nch-OD by each 1 bit in option.
• Port 3 (P30-P36) can be selected for input or output by each 1 bit. Set for input when reset.
And it can be set C-MOS or Nch-OD by each 1 bit in option.
• Port 7 (P70-P73) can be selected for input or output by each 1 bit. Set for input when reset.
• Port 8 (P80-P87) can be selected for input or output by each 1 bit. Set for input when reset.
• Port A (PA0-PA5) can be selected for input or output by each 1 bit. Set for input when reset.
And it can be set C-MOS or Nch-OD by each 1 bit in option.
• Port B (PB0-PB7) can be selected for input or output by each 1 bit.
Set for input when reset. And it can be set C-MOS or Nch-OD by each 1 bit in option.
• Port C (PC0-PC7) can be selected for input or output by each 1 bit.
Set for input when reset. And it can be set C-MOS or Nch-OD by each 1 bit in option.
• Port E and PortF can be selected for input or output by each 2 bits. D
• In case of without RDS, it is best that RDSDATA and RDSCLK are assigned as I/O port which can be set output and output low level.
• Port 0 cannot output High level during HALT mode.

XV-EV51 119
5 6 7 8
1 2 3 4

7.3 CLEANING

A
Before shipping out the product, be sure to clean the following positions by using the prescribed cleaning tools:

Position to be cleaned Cleaning tools

Pickup lenses Cleaning liquid : GEM1004


Cleaning paper : GED-008

120 XV-EV51
1 2 3 4
5 6 7 8

8. PANEL FACILITIES
A

Front panel

6 7 8 9 10 11 12 13
The front panel controls for the EV51DVD model
are shown in the illustrations below. STEREODVD TUNER DECK
EV51DVD

1 SURROUND (EV51DVD model)


Selects a surround listening mode
SFC (EV21DVD model)
Selects sound modes or custom settings from B
the Sound Field Control SOUND MODE TIMER/CL
OCK ADJ

2 STANDBY/ON KARAOKE DISPLA


Y

Switches the player on or into standby ST. MEMORY ENTER

3 ADVANCED SURROUND (EV51DVD model)


Selects an advanced listening mode

CENTER SP (ON/OFF) (EV21DVD model)


DVD/CD TAPE
Switches the center speaker on or off 4/1 – VOLUME + ¡/¢

TUNING– PLAY/PAUSE STTOP UNING+


TUNER LINE

OPEN/CL
OSE
C

1 2 3 4 5 DOLBY NR(DEMO) REVERSE MODE

ASES REC/ST
OP

MIC VOL

MIN MAX

MIC
(MAIN)
D
STANDBY/ON

MIC
SURROUND ADVANCED (SUB)
SURROUND

POWER AMPLIFIER EV51D


VD

STANDBY

14 15 16 17 18 19 20 21

E
PHONES

XV-EV51 121
5 6 7 8
1 2 3 4

4 STANDBY indicator 14 ASES


Lights when the system is in standby Press for CD-to-tape synchro recording

5 PHONES jack
Headphone jack 15 DOLBY NR (DEMO)
Switches Dolby Noise Reduction on or off
6 DVD/CD and TUNER select button
Press to select the source you want to listen to
16 OPEN/CLOSE
7 SOUND MODE Opens the disc tray
B Adjusts the tone, balance and (EV51DVD model
only ) DSP controls 17 MIC VOL
Controls the volume of the karaoke mics
8 KARAOKE (EV51DVD model)
Selects audio channels for karaoke 18 MIC input jacks

VIRTUAL SURROUND (EV21DVD model) 19 VOLUME, TUNING and playback control


Switches the Virtual Surround effect on or off buttons
The TUNING /scan/skip buttons are used for tuning
into stations, skipping or scanning tracks on discs
9 ST. MEMORY or tapes. The playback control button is used for
Use for saving and listening to station presets playing, pausing and stopping playback.

20 REVERSE MODE
C 10 ENTER Selects the playback mode for tapes
Select an option or execute a command
21 REC/STOP
11 DISPLAY Starts/stops recording on the tape deck
Changes the information shown in the display

12 TIMER/CLOCK ADJ
Use for setting the clock, as well as for setting and
checking the timers

13 TAPE and LINE select button


Press to select the source you want to listen to

122 XV-EV51
1 2 3 4
5 6 7 8

Controls and displays


1 STANDBY/ON
Remote control Switches the player on or into standby

2 Function select buttons


The remote control for the EV51DVD model
s i Selects the source you want to listenot
shown in the illustration below
. 3 DVD control buttons
AUDIO
Selects the audio channel or language B

STANDBY/ON
SUBTITLE
1 Selects a subtitle display

2 DVD/CD TAPE FM/AM LINE ANGLE


Changes the camera angle during DVD multi-
angle scene playback
AUDIO SUBTITLE ANGLE ZOOM
3
DSP DVD DISP ZOOM
4 SURROUNDADVANCED MONO SYSTEM DISP
13 Changes the zoom level
I — KEYCON — i
KARAOKE ECHO TIMER MUTE 14
5 15
CLOCK ADJ.
16 4 DSP buttons (EV51DVD model)
C
6 VOLUME
SURROUND
SYSTEM SETUP TOP MENU
7 17 Selects a surround mode for multi-channel
TUNE +
DVD SETUP DVD MENU sound
ST – ST +
8 ENTER
ADV. SURROUND
SOUND
MODE RETURN Selects a DSP mode for multi-channel sound
9 TUNE –
18
/e 33 E/

10 1 3 ¡ Sound Field buttons (EV21DVD model )


FOLDER – FOLDER +

4 8 7 ¢ SFC
PROGRAM REPEAT RANDOM
Selects sound modes or custom settings from
1 2 3 the Sound Field Control
11 CLEAR
TEST TONE CH LEVEL SLEEP D
4 5 6 ENTER VIRTL. SURR.
Switches the Virtual Surround effect on or off
7 8 9 0
TV CONTROL

5 KARAOKE buttons
SHIFT
INPUT CHANNEL VOLUME
SELECT 19
12 KARAOKE
Selects audio channels for karaoke

ECHO
Changes the echo level on the karaoke mics

KEYCON (SHIFT+KARAOKE/ECHO)
Lowers/raises the pitch of the backing track E

XV-EV51 123
5 6 7 8
1 2 3 4

Controls and displays CH LEVEL (SHIFT+5)


Press to adjust the speaker level
A 6 VOLUME SLEEP (SHIFT+6)
Adjusts the volume level Switches the sleep timer on or off
7 DVD SETUP CLEAR
Press to make DVD settings Clears an entry
SYSTEM SETUP (SHIFT+DVD SETUP) ENTER
(EV51DVD model) Selects menu options, etc. (works exactly the
Press to make DSP settings same as the ENTER button in 8 above)

8 ENTER, TUNE & cursor control buttons 12 SHIFT


Navigates on-screen displays and menus. ENTER Press to access the functions/commands written in
selects an option or executes a command. green on the remote

B 9 SOUND MODE 13 SYSTEM DISP


Adjusts the tone, balance and (EV51DVD model Switches between information and clock displays
only ) DSP controls DVD DISP (SHIFT+SYSTEM DISP)
Changes the information shown in the display
10 Playback controls
3 14 MONO
Starts/resumes playback Press to listen to a stereo FM broadcast in
mono (sound quality is usually improved)
1 and /e
CENTER SP (SHIFT+MONO)
Use for reverse slow motion playback, frame
(EV21DVD model only)
reverse and reverse scanning
Switches the center speaker on or off
¡ and E/ 15 MUTE
Use for forward slow motion playback, frame Mutes the volume
C advance and forward scanning

4 16 TIMER/CLOCK ADJ.
Jumps to the beginning of the current chapter Use for setting the clock, as well as for setting and
or track, then to previous checking the timers
chapters/tracks
17 DVD MENU
¢ Jumps to the next chapter or track Displays the DVD menu (for CDs, Video
CDs, and MP3 discs, the Disc Navigator
8 Pauses playback; press again to restart
screen appears)
7 Stops playback
TOP MENU (SHIFT+DVD MENU)
Displays the top menu of a DVD disc
11 Number buttons and SHIFT functions
D The number buttons can be used for selecting tracks 18 RETURN
directly, the functions above the buttons are Press to return to a previous menu screen
accessed by pressing SHIFT at the same time as the
button. 19 TV CONTROL

PROGRAM (SHIFT+1)
Use to program/play a program list Refer to Setting the remote to control your TV
on page 27 to use these controls with your TV.
REPEAT (SHIFT+2)
Selects a repeat play mode Switches the TV on or into standby
RANDOM (SHIFT+3)
INPUT SELECT
Selects a random play mode
Switches the TV input
TEST TONE (SHIFT+4) CHANNEL +/–
E (EV51DVD model only) Selects channels
Outputs the test tone for speaker setup
VOLUME +/ –
(EV51DVD model only)
Adjusts the volume on the TV

124 XV-EV51
1 2 3 4
5 6 7 8

Controls and displays


A
6 MP3
Display Lights during playback of an MP3 disc

7 RPT-1
The front panel display for the EV51DVD model is RPTlights during repeat play ( RPT-1 lights during
shown in the illustration below
. repeat one-track play)

8 Format indicator (EV51DVD model only)


These indicators will light according to which
channels are encoded on the Dolby Digital or DTS
1 multi-channel disc currently in the player. LFE
lights when the disc has an LFE channel.
2
B
3 PGM RDMF PT-1 MONO STEREO TUNED 14 9 MONO
ADV.SURR. 96kHz 13 Lights when FM mono reception is selected
4
SFC MP3
5 12 10 STEREO
Lights when a stereo FM broadcast is being
6 7 8 9 10 11 received in auto stereo mode

11 96 kHz
Lights when a 96kHz source is detected
(wont light if the source is copy-protected)

15 SUB Wf 12
Lights during multi-angle scenes on a DVD disc
C

13
Lights when Virtual Surround is switched on

14 TUNED
Lights when a broadcast is being received
2 PRO LOGIC 19
15 Level meter
2 DIGITAL 18 Shows the level of the source selected
16 17 16 Speaker and playback indicators
The speaker indicators ( ) show the speakers
20 21 22 23 24 25 26 currently active. The playback indicator (3) lights
D
during playback.
2 NR B. CUT REC ASES
ECHO KEY KARAOKE L R WAKE – UP REC
17 2 DIGITAL
27 28 29 30 31 32 This lights to indicate decoding of a Dolby Digital
signal

1 Character display 18 DTS


This lights to indicate decoding of a DTS signal
2 RDM
Lights during random playback 19 2 PRO LOGIC II (EV51DVD model only)
This lights to indicate Prologic II decoding
3 PGM
Lights during program play 20 2 NR
Lights when Dolby Noise Reduction is on E
4 ADV. SURR. (EV51DVD model only)
Lights when one of the Advanced Surround
listening modes is selected

5 SFC (EV21DVD model only)


Lights when one of the Sound Field Control
listening modes is selected

XV-EV51 125
5 6 7 8
1 2 3 4

A
Controls and displays

19 2 PRO LOGIC II (EV51DVD model only) 25 ASES


This lights to indicate Prologic II decoding Lights during ASES recording

20 2 NR 26
Lights when Dolby Noise Reduction is on Lights when the sleep timer is active

21 B.CUT 27 ECHO
B Lights when the beat cut mode has been switched to Lights when the Karaoke ECHO effect is selected
B.CUT2
28 KEY
22 REC Lights when the Karaoke pitch control is selected
Lights when recording to the tape deck
29 KARAOKE LR
23 2 3 Lights when one of the Karaoke modes is selected:
Indicates the direction of tape playback
• KARAOKE (Vocal cancel) - Vocals in the
backing track are partially eliminated using
24
EQ.
Indicates the reverse mode:
• L - Left channel only. Use for tracks that
• - Single side playback
have a vocal recorded in the right channel.
• - Auto-reverse playback: stops after
C • R - Right channel only. Use for tracks that
finishing playback in the reverse (2)
have a vocal recorded in the left channel.
direction
• L R - Use to put a a single-channel vocal track
• - Continuous playback (up to 16
complete plays) into the center of the mix.

30 WAKE-UP
Lights in standby when the wake-up timer is set and
flashes when the wake-up timer activates

31
Lights in standby when either timer is set and
flashes when they activate

32 REC
D
Lights in standby when the record timer is set and
flashes when the timer starts recording

126 XV-EV51
1 2 3 4

You might also like