You are on page 1of 1

1.

ENTER DATA ON YELLOW CELLS HERE:


1.1 MATERIAL

name= UR2202 ONLY THE YELLOW CELLS HAVE TO BE FILLED !!!


2
E= 200000 N/mm
2
Ftu= 650 N/mm ALL OTHER VALUES ARE CALCULATED
2
Fty= 450 N/mm
e max = 30 %

1.2. LINEAR STRESS (that you want to correct using the NEUBER plasticity correction))

2
KtS = 575.728 N/mm

2. BE SURE THAT THE VALUE OF KtS . Kte (cell G40) - AFTER FILLING DATA ON THE YELLOW CELLS - WAS AUTOMATICALLY COPIED TO CELL D17 (blue).
KtS . Kte = 1.657 (used for the goal-seek macro) 1.657334 <---- this cell is used for the macro and should present the same value of C17 when the calculation is finished

3. PRESS THE BUTTON FOR RUNNING THE NEUBER MACRO AND SEE MESSAGE BESIDE BUTTON.

CALCULATION COMPLETE AND CORRECT

4. COPY THE BLOCK FOR THE CONDITION YOU WANT TO YOUR REPORT - FOUR POSSIBILITIES - AS THE BLUE TITLES
CALCULATION FOR LIMIT AND ULTIMATE LOAD WITH RESULT AS RESERVE FACTOR (RF) CALCULATION FOR LIMIT AND ULTIMATE LOAD WITH RESULT AS MARGIN OF SAFETY (MS)

material: UR2202 material: UR2202


2
E= 200000 N/mm E= 200000 N/mm 2
Ftu = 650 N/mm 2 Ftu = 650 N/mm 2
Fty = 450 N/mm 2 Fty = 450 N/mm 2
e max = 30 % e max = 30 %
ey= 0.00225 (Fty / E ) ey= 0.00225 (Fty / E )
KtS = 575.728 --> Kte = 0.00288 KtS = 575.728 --> Kte = 0.00288
KtS . Kte = 1.657 KtS . Kte = 1.657
0
e max - e y = 0.02415 e max - e y = 0.02415
Dp = Ftu - Fty = 200 Dp = Ftu - Fty = 200
R1 = Dp / ( e max - e y ) = 8279.88 R1 = Dp / ( e max - e y ) = 8279.88338
for given ep in the plastic region: Sp = Fty + R1(ep - ey) (1) for given ep in the plastic region: Sp = Fty + R1(ep - ey) (1)

NEUBER states that: KtS . Kte = ep . Sp (2) NEUBER states that: KtS . Kte = ep . Sp (2)

Finding the values of ep and Sp that match equations (1) and (2): Finding the values of ep and Sp that match equations (1) and (2):
2 2
Sp = 461.1 N/mm (corrected stress value) Sp = 461.1 N/mm (corrected stress value)
ep = 0.00359 (corrected strain value) ep = 0.00359 (corrected strain value)

KtS / 1.5 = 383.819 < 450 ( KtS / 1.5 < Fty ) KtS / 1.5 = 383.819 < 450 ( KtS / 1.5 < Fty )

For Ultimate Load RF = 1.40 ( Ftu / Sp ) For Ultimate Load MS = 0.40 ( Ftu / Sp )

For Limit Load RF = 1.17 ( Fty / ( Sp / 1.5) ) For Limit Load MS = 0.17 ( Fty / ( Sp / 1.5) )

CALCULATION FOR ULTIMATE LOAD WITH RESULT AS RESERVE FACTOR (RF) CALCULATION FOR ULTIMATE LOAD WITH RESULT AS MARGIN OF SAFETY (MS)

material: UR2202 material: UR2202

E= 200000 N/mm 2 E= 200000 N/mm 2


Ftu = 650 N/mm 2 Ftu = 650 N/mm 2
Fty = 450 N/mm 2 Fty = 450 N/mm 2
e max = 30 % e max = 30 %
ey= 0.00225 (Fty / E ) ey= 0.00225 (Fty / E )

KtS = 576 --> K te = 0.00288 KtS = 575.728 --> Kte = 0.00288


KtS . Kte = 1.657 KtS . Kte = 1.657

e max - e y = 0.02415 e max - e y = 0.02415


Dp = Ftu - Fty = 200 Dp = Ftu - Fty = 200
R1 = Dp / ( e max - e y ) = 8279.88 R1 = Dp / ( e max - e y ) = 8279.88338

for given ep in the plastic region: Sp = Fty + R1(ep - ey) (1) for given ep in the plastic region: Sp = Fty + R1(ep - ey) (1)

NEUBER states that: KtS . Kte = ep . Sp (2) NEUBER states that: KtS . Kte = ep . Sp (2)

Finding the values of ep and Sp that match equations (1) and (2): Finding the values of ep and Sp that match equations (1) and (2):

2 2
Sp = 461.1 N/mm (corrected stress value) Sp = 461.1 N/mm (corrected stress value)
ep = 0.00359 (corrected strain value) ep = 0.00359 (corrected strain value)

For Ultimate Load RF = 1.40 ( Ftu / Sp ) For Ultimate Load MS = 0.40 ( Ftu / Sp )

You might also like