You are on page 1of 114

Job: Calc.

By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

————————————————————————————————————————————————————————————————————————————————
MATERIALS

MP1: Grade 1637 Ep 195.0


Type: Prestressing Steel - Horizontal

Tensile strength f pk : 1860.0 MPa


0,1% Proof stress f p0,1k : 1637.0 MPa
Elastic modulus Ep : 195.0 GPa
Shear modulus : 75.0 GPa
Relaxation loss after 1000 hours: 2.5 %
Relaxation class : 2
Density : 77.0 kN/m³

MP2: C40/50 Ecm 35.2


Type: Concrete - Parabola-Rectangle

Design Code part : EN 1992-1-1


Characteristic strength f ck : 40.0 MPa

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 1
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

f ck,cube : 50.0 MPa


Elastic modulus E cm : 35.220462 GPa
Elastic modulus - long term : 11.840787 GPa
Shear modulus : 14.675193 GPa
Poisson's ratio : 0.2
Ultimate compressive strain ε cu : 0.0035
Tensile strength f ctm : -3.508821 MPa
Cement class : N - Normal and rapid hardening
Contains silica fume : No
Coefficient of thermal expansion: 0.00001 /°C
Density : 24.0 kN/m³
Density increase for rft. : 1.0 kN/m³

MP3: Grade 500 Es 200.0


Type: Reinforcing Steel - Horizontal

Yield strength f yk : 500.0 MPa


Elastic modulus Es : 200.0 GPa
Shear modulus : 76.923077 GPa
Characteristic strain limit ε uk : 0.025
Density : 77.0 kN/m³

MP4: Elastic m odulus 1.0


Type: E (for m odular ratio)

Elastic modulus : 1.0 GPa


Shear modulus : 0.4166666 GPa
Poisson's ratio : 0.2
Coefficient of thermal expansion: 0.00001 /°C

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 2
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

MP5: Defined - Elastic


Type: Defined Stress-Strain

Defined type : Elastic


Factored strength : 440.0 MPa
Elastic modulus : 200.0 GPa
Shear modulus : 76.92308 GPa
Poisson's ratio : 0.3
Stress limit - Compression : 440.0 MPa
- Tension : -440.0 MPa

————————————————————————————————————————————————————————————————————————————————
DESIGN SECTION - SS1: PRESTRESS TO HK
--------------------------------------------------------------------------------

ELEMENTS
———————————————————————————————————————————————————————————————————————————
Name Library Material Property
———————————————————————————————————————————————————————————————————————————
SE1: Deck User Library MP2: C40/50 Ecm 35.2

Elem ent coordinates for SE1: Deck


———————————————————————————————————————————————————————————————————————
Node y-z coords mm Node y-z coords mm Node y-z coords mm
———————————————————————————————————————————————————————————————————————
1 8.422E7 -5.1E7 10 8.535E7 -5.1E7 18 8.501E7 -5.21E7
2 8.422E7 -5.1E7 11 8.53E7 -5.1E7 19 8.488E7 -5.23E7
3 8.398E7 -5.1E7 12 8.53E7 -5.1E7 20 8.464E7 -5.24E7
4 8.398E7 -5.1E7 13 8.507E7 -5.1E7 21 8.44E7 -5.23E7
5 8.393E7 -5.1E7 14 8.507E7 -5.1E7 22 8.428E7 -5.21E7
6 8.416E7 -5.25E7 15 8.503E7 -5.1E7 23 8.416E7 -5.14E7
7 8.419E7 -5.26E7 16 8.503E7 -5.1E7 24 8.426E7 -5.1E7
8 8.509E7 -5.26E7 17 8.512E7 -5.14E7 25 8.426E7 -5.1E7
9 8.513E7 -5.25E7
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 3
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

--------------------------------------------------------------------------------

TENDONS
———————————————————————————————————————————————————————————————————————————
Ref Y-Z coords Area Initial Material Property
mm mm² Force kN
———————————————————————————————————————————————————————————————————————————
1 8.424E7 -5.25E7 140.0 194.803 MP1: Grade 1637 Ep 195.0
2 8.429E7 -5.25E7 140.0 194.803 MP1: Grade 1637 Ep 195.0
3 8.434E7 -5.25E7 140.0 194.803 MP1: Grade 1637 Ep 195.0
4 8.439E7 -5.25E7 140.0 194.803 MP1: Grade 1637 Ep 195.0
5 8.444E7 -5.25E7 140.0 194.803 MP1: Grade 1637 Ep 195.0
6 8.449E7 -5.25E7 140.0 194.803 MP1: Grade 1637 Ep 195.0
7 8.454E7 -5.25E7 140.0 194.803 MP1: Grade 1637 Ep 195.0
8 8.464E7 -5.25E7 140.0 194.803 MP1: Grade 1637 Ep 195.0
9 8.474E7 -5.25E7 140.0 194.803 MP1: Grade 1637 Ep 195.0
10 8.484E7 -5.25E7 140.0 194.803 MP1: Grade 1637 Ep 195.0
11 8.489E7 -5.25E7 140.0 194.803 MP1: Grade 1637 Ep 195.0
12 8.494E7 -5.25E7 140.0 194.803 MP1: Grade 1637 Ep 195.0
13 8.499E7 -5.25E7 140.0 194.803 MP1: Grade 1637 Ep 195.0
14 8.504E7 -5.25E7 140.0 194.803 MP1: Grade 1637 Ep 195.0
15 8.424E7 -5.24E7 140.0 194.803 MP1: Grade 1637 Ep 195.0
16 8.434E7 -5.24E7 140.0 194.803 MP1: Grade 1637 Ep 195.0
17 8.439E7 -5.24E7 140.0 194.803 MP1: Grade 1637 Ep 195.0
18 8.449E7 -5.24E7 140.0 194.803 MP1: Grade 1637 Ep 195.0
19 8.459E7 -5.24E7 140.0 194.803 MP1: Grade 1637 Ep 195.0
20 8.464E7 -5.24E7 140.0 194.803 MP1: Grade 1637 Ep 195.0
21 8.469E7 -5.24E7 140.0 194.803 MP1: Grade 1637 Ep 195.0
22 8.479E7 -5.24E7 140.0 194.803 MP1: Grade 1637 Ep 195.0
23 8.494E7 -5.24E7 140.0 194.803 MP1: Grade 1637 Ep 195.0
24 8.504E7 -5.24E7 140.0 194.803 MP1: Grade 1637 Ep 195.0
25 8.405E7 -5.11E7 140.0 194.803 MP1: Grade 1637 Ep 195.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 4
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

26 8.418E7 -5.11E7 140.0 194.803 MP1: Grade 1637 Ep 195.0


27 8.51E7 -5.11E7 140.0 194.803 MP1: Grade 1637 Ep 195.0
28 8.524E7 -5.11E7 140.0 194.803 MP1: Grade 1637 Ep 195.0

————————————————————————————————————————————————————————————————————————————————
DESIGN BEAM - SB1: SPAN 1
--------------------------------------------------------------------------------

BEAM DEFINITION

EN 1992-2 Pre-tensioned Prestressed Beam


With recom m ended NDP values

Total length of pre-tensioned beam : 24 m


Distance from left support to beam end face : 0 m
Distance from right support to beam end face : 0 m
Total distance between supports : 24 m

Beam section varies along length of beam.

Number of different sections : 2


No. of longitudinal construction stages : 2
No. of superimposed construction stages : 1

Stage 1

Precast beam:
Precast beam is standard section: U12 Beam
Property set: MP2: C40/50 Ecm 35.2
Age of beam at transfer: 4.0 days
Corresponding concrete strength at transfer: 23.8094 MPa

In situ concrete - stage 1A:


In situ is from non-standard section: Rectangle
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 5
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Property set: MP2: C40/50 Ecm 35.2


Age of beam when stage 1A concrete is cast: 14 days

Shear resistance width: 326.0 mm

Stage 2

Precast beam:
Precast beam is standard section: U12 Beam
Property set: MP2: C40/50 Ecm 35.2
Age of beam at transfer: 4.0 days
Corresponding concrete strength at transfer: 23.8094 MPa

In situ concrete - stage 1B:


In situ is from non-standard section: Rectangle
Property set: MP2: C40/50 Ecm 35.2
Age of beam when stage 1B concrete is cast: 30 days

Shear resistance width: 326.0 mm

Tendons
—————————————————————————————————————————————————————————————————————————————
y-z coordinates area transmission coeffients φ draw-in property type
mm mm² α 1 α2 η p1 η1 η p2 mm mm/beam ref
—————————————————————————————————————————————————————————————————————————————
-380.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-340.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-300.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-250.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-200.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
-150.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 6
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

-100.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
-50.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
-6.E-14 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
50.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
100.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
150.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
200.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
250.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
300.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
340.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
380.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-150.0 110.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-100.0 110.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-50.0 110.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-6.E-14 110.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
50.0 110.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
100.0 110.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
150.0 110.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-300.0 160.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
300.0 160.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-606.0 1500.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-471.0 1500.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
471.0 1500.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
606.0 1500.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress

Debonded Tendons
———————————————————————————————————————————————————
y-z coordinates distance from left end (m)
mm start end
———————————————————————————————————————————————————
-200.0 60.0 1.5 22.5
-150.0 60.0 2.0 22.0
-100.0 60.0 1.5 22.5

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 7
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

-50.0 60.0 2.0 22.0


-6.E-14 60.0 3.5 20.5
50.0 60.0 3.5 20.5
100.0 60.0 2.0 22.0
150.0 60.0 1.5 22.5
200.0 60.0 1.5 22.5
250.0 60.0 2.0 22.0

Reinforcem ent
————————————————————————————————————————————————————————————————————
y-z coordinates diameter Property Start End Length
mm mm ref m m m
————————————————————————————————————————————————————————————————————
900.0 1734.0 32.0 MP3 20.4 24.0 3.6
700.0 1734.0 32.0 MP3 20.4 24.0 3.6
500.0 1734.0 32.0 MP3 20.4 24.0 3.6
300.0 1734.0 32.0 MP3 20.4 24.0 3.6
100.0 1734.0 32.0 MP3 20.4 24.0 3.6
-100.0 1734.0 32.0 MP3 20.4 24.0 3.6
-300.0 1734.0 32.0 MP3 20.4 24.0 3.6
-500.0 1734.0 32.0 MP3 20.4 24.0 3.6
-700.0 1734.0 32.0 MP3 20.4 24.0 3.6
-900.0 1734.0 32.0 MP3 20.4 24.0 3.6
900.0 1734.0 20.0 MP3 0.0 3.6 3.6
700.0 1734.0 20.0 MP3 0.0 3.6 3.6
500.0 1734.0 20.0 MP3 0.0 3.6 3.6
300.0 1734.0 20.0 MP3 0.0 3.6 3.6
100.0 1734.0 20.0 MP3 0.0 3.6 3.6
-100.0 1734.0 20.0 MP3 0.0 3.6 3.6
-300.0 1734.0 20.0 MP3 0.0 3.6 3.6
-500.0 1734.0 20.0 MP3 0.0 3.6 3.6

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 8
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

-700.0 1734.0 20.0 MP3 0.0 3.6 3.6


-900.0 1734.0 20.0 MP3 0.0 3.6 3.6

Location of sections

Position along span


from left support: Section
dimension (m) proportion
0.0 0.0 1 Stage 1
20.4 0.85 1 Stage 1
20.4 0.85 2 Stage 2
24.0 1.0 2 Stage 2

--------------------------------------------------------------------------------
PRE-TENSIONED BEAM LOADING DATA

Differential tem perature secondary loads - heating


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 0.0 0.0 51.4579 34.3053 0.0 0.0
1.2 0.05 61.7437 41.1625 51.4579 34.3053 0.0 0.0
2.4 0.1 123.499 82.3327 51.4585 34.3056 0.0 0.0
3.6 0.15 185.244 123.496 51.4637 34.3091 0.0 0.0
4.8 0.2 247.012 164.675 51.4816 34.321 0.0 0.0
6.0 0.25 308.8 205.867 51.4914 34.3276 0.0 0.0
7.2 0.3 370.591 247.061 51.49 34.3267 0.0 0.0
8.4 0.35 432.376 288.251 51.4827 34.3218 0.0 0.0
9.6 0.4 494.15 329.433 51.4557 34.3038 0.0 0.0
10.8 0.45 555.869 370.58 51.498 34.332 0.0 0.0
12.0 0.5 617.745 411.83 51.5158 34.3439 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 9
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

13.2 0.55 679.507 453.005 51.4685 34.3123 0.0 0.0


14.4 0.6 741.269 494.18 51.4203 34.2802 0.0 0.0
15.6 0.65 802.916 535.277 51.3576 34.2384 0.0 0.0
16.8 0.7 864.527 576.352 51.3443 34.2295 0.0 0.0
18.0 0.75 926.142 617.428 51.342 34.228 0.0 0.0
19.2 0.8 987.748 658.499 51.3449 34.2299 0.0 0.0
20.4 0.85 1049.37 699.58 51.3372 34.2248 0.0 0.0
21.6 0.9 1110.96 740.638 51.3251 34.2167 0.0 0.0
22.8 0.95 1172.55 781.7 51.328 34.2186 0.0 0.0
24.0 1.0 1234.14 822.763 51.328 34.2186 0.0 0.0

These actions are transferred from the following analysis run:

Location: Span 1
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Linebeam with Temperature or Shrinkage
- ULS factor: 1.5 SLS factor: 1.0

Differential tem perature secondary loads - cooling


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 0.0 0.0 18.0401 12.0267 0.0 0.0
1.2 0.05 -21.648 -14.432 18.0401 12.0267 0.0 0.0
2.4 0.1 -43.297 -28.865 18.0448 12.0299 0.0 0.0
3.6 0.15 -64.956 -43.304 18.0445 12.0297 0.0 0.0
4.8 0.2 -86.604 -57.736 18.0453 12.0302 0.0 0.0
6.0 0.25 -108.26 -72.176 18.0555 12.037 0.0 0.0
7.2 0.3 -129.94 -86.625 18.047 12.0314 0.0 0.0
8.4 0.35 -151.58 -101.05 18.0465 12.031 0.0 0.0
9.6 0.4 -173.25 -115.5 18.054 12.036 0.0 0.0
10.8 0.45 -194.91 -129.94 18.056 12.0374 0.0 0.0
12.0 0.5 -216.58 -144.39 18.0629 12.0419 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 10
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

13.2 0.55 -238.26 -158.84 18.0441 12.0294 0.0 0.0


14.4 0.6 -259.89 -173.26 18.0322 12.0214 0.0 0.0
15.6 0.65 -281.53 -187.69 18.0235 12.0157 0.0 0.0
16.8 0.7 -303.15 -202.1 18.001 12.0007 0.0 0.0
18.0 0.75 -324.74 -216.49 18.0018 12.0012 0.0 0.0
19.2 0.8 -346.35 -230.9 18.0016 12.001 0.0 0.0
20.4 0.85 -367.94 -245.29 17.9958 11.9972 0.0 0.0
21.6 0.9 -389.54 -259.69 17.9992 11.9995 0.0 0.0
22.8 0.95 -411.14 -274.09 17.9983 11.9989 0.0 0.0
24.0 1.0 -432.74 -288.49 17.9983 11.9989 0.0 0.0

These actions are transferred from the following analysis run:

Location: Span 1
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Linebeam with Temperature or Shrinkage
- ULS factor: 1.5 SLS factor: 1.0

Shrinkage and creep secondary effects


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 0.0 2.81E-4 8.36666 6.19753 0.0 0.0
1.2 0.05 -10.038 -7.4357 8.36666 6.19753 0.0 0.0
2.4 0.1 -20.08 -14.874 8.37055 6.20041 0.0 0.0
3.6 0.15 -30.128 -22.317 8.36709 6.19785 0.0 0.0
4.8 0.2 -40.161 -29.749 8.37201 6.20149 0.0 0.0
6.0 0.25 -50.22 -37.2 8.38868 6.21384 0.0 0.0
7.2 0.3 -60.293 -44.662 8.37956 6.20708 0.0 0.0
8.4 0.35 -70.331 -52.097 8.36901 6.19926 0.0 0.0
9.6 0.4 -80.379 -59.54 8.37378 6.2028 0.0 0.0
10.8 0.45 -90.428 -66.984 8.38319 6.20977 0.0 0.0
12.0 0.5 -100.5 -74.444 8.38837 6.21361 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 11
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

13.2 0.55 -110.56 -81.897 8.37237 6.20176 0.0 0.0


14.4 0.6 -120.59 -89.328 8.35277 6.18724 0.0 0.0
15.6 0.65 -130.61 -96.746 8.32777 6.16872 0.0 0.0
16.8 0.7 -140.58 -104.13 8.30326 6.15056 0.0 0.0
18.0 0.75 -150.53 -111.51 8.29885 6.1473 0.0 0.0
19.2 0.8 -160.5 -118.89 8.30171 6.14942 0.0 0.0
20.4 0.85 -170.46 -126.27 8.30021 6.14831 0.0 0.0
21.6 0.9 -180.42 -133.64 8.29831 6.1469 0.0 0.0
22.8 0.95 -190.37 -141.02 8.29838 6.14695 0.0 0.0
24.0 1.0 -200.33 -148.39 8.29838 6.14695 0.0 0.0

These actions are transferred from the following analysis run:

Location: Span 1
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Linebeam with Temperature or Shrinkage
- ULS factor: 1.35 SLS factor: 1.0

Settlem ent of supports


- none defined -

Beam Erection
Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 0.0 0.0 320.479 237.392 0.0 0.0
1.2 0.05 365.357 270.635 288.443 213.662 0.0 0.0
2.4 0.1 692.279 512.799 256.444 189.958 0.0 0.0
3.6 0.15 980.778 726.502 224.466 166.271 0.0 0.0
4.8 0.2 1230.93 911.799 192.445 142.552 0.0 0.0
6.0 0.25 1442.6 1068.6 160.425 118.833 0.0 0.0
7.2 0.3 1616.12 1197.13 128.236 94.9897 0.0 0.0
8.4 0.35 1750.74 1296.85 96.4267 71.4272 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 12
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

9.6 0.4 1847.14 1368.25 64.2798 47.6147 0.0 0.0


10.8 0.45 1905.02 1411.13 32.3861 23.9897 0.0 0.0
12.0 0.5 1924.72 1425.72 0.23915 0.17715 0.0 0.0
13.2 0.55 1905.82 1411.72 32.1608 23.8228 0.0 0.0
14.4 0.6 1848.15 1369.0 64.3921 47.6978 0.0 0.0
15.6 0.65 1751.54 1297.44 96.2859 71.3229 0.0 0.0
16.8 0.7 1616.84 1197.66 128.475 95.1666 0.0 0.0
18.0 0.75 1443.45 1069.22 160.537 118.917 0.0 0.0
19.2 0.8 1231.6 912.299 192.516 142.604 0.0 0.0
20.4 0.85 981.347 726.924 224.62 166.385 0.0 0.0
21.6 0.9 692.553 513.002 256.535 190.026 0.0 0.0
22.8 0.95 365.498 270.739 288.566 213.752 0.0 0.0
24.0 1.0 0.0 0.0 320.6 237.482 0.0 0.0

These actions are transferred from the following analysis run:

Location: Span 1
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Linebeam with Erection of beam
- ULS factor: 1.35 SLS factor: 1.0

Construction stage 1A
Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 0.0 0.0 154.457 114.412 0.0 0.0
1.2 0.05 175.866 130.271 138.658 102.709 0.0 0.0
2.4 0.1 332.788 246.51 122.89 91.0297 0.0 0.0
3.6 0.15 470.741 348.697 107.122 79.35 0.0 0.0
4.8 0.2 589.805 436.893 91.3866 67.6937 0.0 0.0
6.0 0.25 689.916 511.049 75.5452 55.9594 0.0 0.0
7.2 0.3 771.148 571.221 59.7248 44.2406 0.0 0.0
8.4 0.35 833.353 617.299 43.9256 32.5375 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 13
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

9.6 0.4 876.596 649.33 28.0631 20.7875 0.0 0.0


10.8 0.45 900.874 667.314 12.3272 9.13125 0.0 0.0
12.0 0.5 906.296 671.33 3.49313 2.58751 0.0 0.0
13.2 0.55 892.69 661.252 19.3978 14.3688 0.0 0.0
14.4 0.6 859.91 636.971 35.197 26.0719 0.0 0.0
15.6 0.65 808.125 598.611 51.0384 37.8063 0.0 0.0
16.8 0.7 737.408 546.228 66.8587 49.525 0.0 0.0
18.0 0.75 647.707 479.783 82.7002 61.2594 0.0 0.0
19.2 0.8 538.99 399.252 98.4572 72.9313 0.0 0.0
20.4 0.85 411.349 304.703 114.296 84.6641 0.0 0.0
21.6 0.9 274.166 203.086 114.233 84.6172 0.0 0.0
22.8 0.95 137.085 101.544 114.238 84.6211 0.0 0.0
24.0 1.0 0.0 0.0 114.238 84.6211 0.0 0.0

These actions are transferred from the following analysis run:

Location: Span 1
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Linebeam with Construction stage 1A
- ULS factor: 1.35 SLS factor: 1.0

Construction stage 1B
Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 4.12E-5 3.05E-5 0.61860 0.45822 0.0 0.0
1.2 0.05 0.74239 0.54992 0.61843 0.45809 0.0 0.0
2.4 0.1 1.48424 1.09943 0.61868 0.45828 0.0 0.0
3.6 0.15 2.22609 1.64896 0.61882 0.45838 0.0 0.0
4.8 0.2 2.96815 2.19863 0.61841 0.45808 0.0 0.0
6.0 0.25 3.71032 2.74838 0.61814 0.45788 0.0 0.0
7.2 0.3 4.45107 3.29709 0.61952 0.45890 0.0 0.0
8.4 0.35 5.19252 3.84631 0.61798 0.45776 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 14
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

9.6 0.4 5.93534 4.39655 0.61789 0.45770 0.0 0.0


10.8 0.45 6.67912 4.94749 0.61625 0.45648 0.0 0.0
12.0 0.5 7.4189 5.49548 0.61740 0.45733 0.0 0.0
13.2 0.55 8.15799 6.04295 0.62082 0.45986 0.0 0.0
14.4 0.6 8.90072 6.59312 0.62362 0.46194 0.0 0.0
15.6 0.65 9.64893 7.14735 0.61748 0.45739 0.0 0.0
16.8 0.7 10.3925 7.69812 0.62111 0.46008 0.0 0.0
18.0 0.75 11.1373 8.24982 0.62247 0.46109 0.0 0.0
19.2 0.8 11.8825 8.80182 0.62259 0.46118 0.0 0.0
20.4 0.85 12.6281 9.35411 0.62239 0.46103 0.0 0.0
21.6 0.9 3.89845 2.88774 15.1736 11.2397 0.0 0.0
22.8 0.95 -23.787 -17.62 30.9682 22.9394 0.0 0.0
24.0 1.0 -70.426 -52.167 46.7632 34.6394 0.0 0.0

These actions are transferred from the following analysis run:

Location: Span 1
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Linebeam with Construction stage 1B
- ULS factor: 1.35 SLS factor: 1.0

Construction stage 2
- none defined -

Construction stage 3
- none defined -

Surfacing 1
Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 0.0 0.0 43.173 35.9775 0.0 0.0
1.2 0.05 48.6468 40.539 37.9017 31.5848 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 15
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

2.4 0.1 90.9679 75.8066 32.6314 27.1929 0.0 0.0


3.6 0.15 126.961 105.801 27.363 22.8025 0.0 0.0
4.8 0.2 156.629 130.524 22.0863 18.4053 0.0 0.0
6.0 0.25 179.965 149.97 16.824 14.02 0.0 0.0
7.2 0.3 196.973 164.144 11.5634 9.63618 0.0 0.0
8.4 0.35 207.671 173.06 6.27563 5.22969 0.0 0.0
9.6 0.4 212.029 176.69 1.02475 0.85395 0.0 0.0
10.8 0.45 210.086 175.072 4.28692 3.57243 0.0 0.0
12.0 0.5 201.787 168.156 9.54322 7.95268 0.0 0.0
13.2 0.55 187.171 155.976 14.8022 12.3351 0.0 0.0
14.4 0.6 166.253 138.544 20.0438 16.7032 0.0 0.0
15.6 0.65 139.037 115.864 25.3045 21.0871 0.0 0.0
16.8 0.7 105.508 87.9236 30.5627 25.4689 0.0 0.0
18.0 0.75 65.6816 54.7347 35.8306 29.8588 0.0 0.0
19.2 0.8 19.5107 16.2589 41.0847 34.2372 0.0 0.0
20.4 0.85 -32.965 -27.471 46.3666 38.6388 0.0 0.0
21.6 0.9 -91.768 -76.473 51.6402 43.0335 0.0 0.0
22.8 0.95 -156.9 -130.75 56.9093 47.4244 0.0 0.0
24.0 1.0 -228.35 -190.29 62.1797 51.8164 0.0 0.0

These actions are transferred from the following analysis run:

Location: Span 1
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Linebeam with Superimposed dead load
- ULS factor: 1.2 SLS factor: 1.0

Traffic gr1a TS - for Bending design 1 : [Max +ve]


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
1.2 0.05 854.667 633.087 709.467 525.531 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 16
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

2.4 0.1 1615.1 1196.37 672.924 498.462 0.0 0.0


3.6 0.15 2268.31 1680.23 315.115 233.418 0.0 0.0
4.8 0.2 2755.07 2040.79 320.808 237.636 0.0 0.0
6.0 0.25 3176.37 2352.87 326.84 242.104 0.0 0.0
7.2 0.3 3517.23 2605.36 68.4824 50.7277 0.0 0.0
8.4 0.35 3731.69 2764.21 71.7493 53.1476 0.0 0.0
9.6 0.4 3856.7 2856.82 33.8133 25.0469 0.0 0.0
10.8 0.45 3906.39 2893.62 39.7936 29.4768 0.0 0.0
12.0 0.5 3811.32 2823.2 29.7955 22.0707 0.0 0.0
13.2 0.55 3669.4 2718.07 18.6391 13.8068 0.0 0.0
14.4 0.6 3451.55 2556.7 272.082 201.542 0.0 0.0
15.6 0.65 3149.5 2332.97 259.091 191.919 0.0 0.0
16.8 0.7 2813.98 2084.43 245.507 181.857 0.0 0.0
18.0 0.75 2376.93 1760.69 635.734 470.914 0.0 0.0
19.2 0.8 1861.25 1378.7 408.877 302.872 0.0 0.0
20.4 0.85 1358.92 1006.61 391.076 289.686 0.0 0.0
21.6 0.9 790.009 585.192 563.572 417.46 0.0 0.0
22.8 0.95 274.079 203.022 12.0761 8.94526 0.0 0.0
24.0 1.0 288.573 213.757 12.0761 8.94526 0.0 0.0

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 1
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum -ve Moments
- ULS factor: 1.35 SLS factor: 1.0

Traffic gr1a UDL - for Bending design 1 : [Max +ve]


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 17
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

1.2 0.05 448.204 332.003 349.317 258.753 0.0 0.0


2.4 0.1 847.362 627.676 316.818 234.68 0.0 0.0
3.6 0.15 1196.39 886.213 251.814 186.529 0.0 0.0
4.8 0.2 1487.5 1101.85 219.249 162.406 0.0 0.0
6.0 0.25 1729.4 1281.04 186.75 138.333 0.0 0.0
7.2 0.3 1920.14 1422.33 121.848 90.2577 0.0 0.0
8.4 0.35 2054.17 1521.61 89.1836 66.062 0.0 0.0
9.6 0.4 2139.02 1584.46 56.7086 42.0063 0.0 0.0
10.8 0.45 2171.8 1608.74 88.0606 65.2301 0.0 0.0
12.0 0.5 2148.35 1591.37 100.37 74.3481 0.0 0.0
13.2 0.55 2076.01 1537.79 110.3 81.7039 0.0 0.0
14.4 0.6 1950.8 1445.04 682.133 505.284 0.0 0.0
15.6 0.65 1770.98 1311.84 688.501 510.001 0.0 0.0
16.8 0.7 1542.35 1142.48 693.624 513.795 0.0 0.0
18.0 0.75 1259.63 933.061 1539.09 1140.07 0.0 0.0
19.2 0.8 923.124 683.795 1117.86 828.046 0.0 0.0
20.4 0.85 562.293 416.514 1024.29 758.732 0.0 0.0
21.6 0.9 325.647 241.22 1276.37 945.459 0.0 0.0
22.8 0.95 216.414 160.307 24.7818 18.3569 0.0 0.0
24.0 1.0 198.487 147.027 8.30669 6.1531 0.0 0.0

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 1
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum -ve Moments
- ULS factor: 1.35 SLS factor: 1.0

Traffic gr1b-gr5 - for Bending design 1 : [Max +ve]


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 18
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0


1.2 0.05 584.067 432.642 486.716 360.53 0.0 0.0
2.4 0.1 1104.44 818.103 460.165 340.863 0.0 0.0
3.6 0.15 1550.85 1148.78 106.345 78.7743 0.0 0.0
4.8 0.2 1893.69 1402.73 394.456 292.19 0.0 0.0
6.0 0.25 2145.64 1589.36 160.322 118.757 0.0 0.0
7.2 0.3 2376.19 1760.14 184.25 136.482 0.0 0.0
8.4 0.35 2541.15 1882.33 243.602 180.446 0.0 0.0
9.6 0.4 2687.26 1990.56 271.918 201.421 0.0 0.0
10.8 0.45 2719.29 2014.29 239.298 177.258 0.0 0.0
12.0 0.5 2611.34 1934.33 209.702 155.335 0.0 0.0
13.2 0.55 2485.67 1841.23 179.456 132.931 0.0 0.0
14.4 0.6 2422.56 1794.49 364.158 269.746 0.0 0.0
15.6 0.65 2170.78 1607.99 371.711 275.342 0.0 0.0
16.8 0.7 1930.93 1430.32 53.2598 39.4517 0.0 0.0
18.0 0.75 1653.69 1224.95 436.651 323.445 0.0 0.0
19.2 0.8 1292.8 957.631 455.79 337.622 0.0 0.0
20.4 0.85 983.531 728.541 48.4362 35.8786 0.0 0.0
21.6 0.9 622.675 461.241 503.662 373.083 0.0 0.0
22.8 0.95 183.152 135.668 8.06976 5.9776 0.0 0.0
24.0 1.0 192.837 142.842 8.06976 5.9776 0.0 0.0

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 1
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum -ve Moments
- ULS factor: 1.35 SLS factor: 1.0

Traffic gr1a TS - for Bending design 2 : [Max -ve]


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 19
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

dim (m ) pro ULS SLS ULS SLS ULS SLS


0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
1.2 0.05 -65.151 -48.26 54.2869 40.2125 0.0 0.0
2.4 0.1 -130.3 -96.521 54.2876 40.2131 0.0 0.0
3.6 0.15 -195.43 -144.77 54.2811 40.2082 0.0 0.0
4.8 0.2 -260.59 -193.03 54.2679 40.1984 0.0 0.0
6.0 0.25 -325.7 -241.26 54.2729 40.2021 0.0 0.0
7.2 0.3 -390.77 -289.46 54.3323 40.2462 0.0 0.0
8.4 0.35 -455.93 -337.73 54.2463 40.1825 0.0 0.0
9.6 0.4 -521.06 -385.97 54.2459 40.1822 0.0 0.0
10.8 0.45 -586.2 -434.22 54.2267 40.1679 0.0 0.0
12.0 0.5 -651.23 -482.39 54.2843 40.2106 0.0 0.0
13.2 0.55 -716.31 -530.6 54.3915 40.29 0.0 0.0
14.4 0.6 -781.56 -578.93 54.4421 40.3275 0.0 0.0
15.6 0.65 -846.89 -627.32 54.4869 40.3607 0.0 0.0
16.8 0.7 -912.31 -675.78 54.6117 40.4531 0.0 0.0
18.0 0.75 -977.88 -724.35 54.6115 40.453 0.0 0.0
19.2 0.8 -1043.4 -772.88 54.6388 40.4732 0.0 0.0
20.4 0.85 -1109.0 -821.45 54.6644 40.4921 0.0 0.0
21.6 0.9 -1174.5 -870.03 54.65 40.4814 0.0 0.0
22.8 0.95 -1240.1 -918.61 54.642 40.4755 0.0 0.0
24.0 1.0 -1589.2 -1177.2 513.937 380.694 0.0 0.0

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 1
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum +ve Moments
- ULS factor: 1.35 SLS factor: 1.0

Traffic gr1a UDL - for Bending design 2 : [Max -ve]


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 20
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

(from left support) kN.m kN kN


dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
1.2 0.05 -47.326 -35.056 148.007 109.634 0.0 0.0
2.4 0.1 -94.648 -70.11 148.012 109.638 0.0 0.0
3.6 0.15 -141.96 -105.16 147.993 109.625 0.0 0.0
4.8 0.2 -189.29 -140.21 147.96 109.6 0.0 0.0
6.0 0.25 -236.58 -175.24 147.967 109.605 0.0 0.0
7.2 0.3 -283.86 -210.26 148.117 109.716 0.0 0.0
8.4 0.35 -331.18 -245.32 147.905 109.559 0.0 0.0
9.6 0.4 -378.49 -280.36 147.896 109.553 0.0 0.0
10.8 0.45 -425.81 -315.41 147.835 109.507 0.0 0.0
12.0 0.5 -473.04 -350.4 148.002 109.631 0.0 0.0
13.2 0.55 -520.31 -385.42 148.3 109.852 0.0 0.0
14.4 0.6 -567.7 -420.52 148.419 109.94 0.0 0.0
15.6 0.65 -615.15 -455.67 148.564 110.047 0.0 0.0
16.8 0.7 -662.68 -490.88 148.886 110.286 0.0 0.0
18.0 0.75 -710.31 -526.15 148.895 110.292 0.0 0.0
19.2 0.8 -757.91 -561.41 148.953 110.335 0.0 0.0
20.4 0.85 -830.18 -614.94 232.623 172.314 0.0 0.0
21.6 0.9 -1082.0 -801.47 400.104 296.374 0.0 0.0
22.8 0.95 -1513.4 -1121.1 538.236 398.694 0.0 0.0
24.0 1.0 -2086.6 -1545.7 1537.6 1138.97 0.0 0.0

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 1
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum +ve Moments
- ULS factor: 1.35 SLS factor: 1.0

Traffic gr1b-gr5 - for Bending design 2 : [Max -ve]


Actions are defined for the distance between supports
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 21
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Span Location Bending Moment Shear Force Axial Force


(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
1.2 0.05 -43.514 -32.232 36.258 26.8578 0.0 0.0
2.4 0.1 -87.03 -64.466 36.2573 26.8573 0.0 0.0
3.6 0.15 -130.53 -96.689 36.2539 26.8547 0.0 0.0
4.8 0.2 -174.05 -128.92 36.245 26.8482 0.0 0.0
6.0 0.25 -217.53 -161.14 36.2477 26.8501 0.0 0.0
7.2 0.3 -260.99 -193.33 36.2903 26.8817 0.0 0.0
8.4 0.35 -304.52 -225.57 36.2283 26.8358 0.0 0.0
9.6 0.4 -348.01 -257.79 36.2355 26.8411 0.0 0.0
10.8 0.45 -391.52 -290.02 36.2175 26.8278 0.0 0.0
12.0 0.5 -434.96 -322.19 36.2545 26.8552 0.0 0.0
13.2 0.55 -478.42 -354.39 36.326 26.9082 0.0 0.0
14.4 0.6 -522.0 -386.67 36.3646 26.9367 0.0 0.0
15.6 0.65 -565.64 -418.99 36.3891 26.9549 0.0 0.0
16.8 0.7 -609.33 -451.36 36.477 27.02 0.0 0.0
18.0 0.75 -653.13 -483.8 36.473 27.017 0.0 0.0
19.2 0.8 -696.88 -516.21 36.4949 27.0332 0.0 0.0
20.4 0.85 -740.68 -548.65 36.5108 27.045 0.0 0.0
21.6 0.9 -784.48 -581.1 36.5015 27.0382 0.0 0.0
22.8 0.95 -828.28 -613.54 36.4951 27.0334 0.0 0.0
24.0 1.0 -1067.0 -790.4 352.584 261.173 0.0 0.0

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 1
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum +ve Moments
- ULS factor: 1.35 SLS factor: 1.0

Traffic gr1a TS - for Shear design 1


Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 22
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Actions are defined for the distance between supports


Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 0.0 0.0 773.76 573.156 0.0 0.0
1.2 0.05 854.667 633.087 709.467 525.531 0.0 0.0
2.4 0.1 1615.1 1196.37 672.924 498.462 0.0 0.0
3.6 0.15 2135.91 1582.16 593.297 439.479 0.0 0.0
4.8 0.2 2659.16 1969.75 553.904 410.299 0.0 0.0
6.0 0.25 3205.51 2374.45 532.536 394.471 0.0 0.0
7.2 0.3 3295.93 2441.43 457.909 339.192 0.0 0.0
8.4 0.35 3608.63 2673.06 429.536 318.175 0.0 0.0
9.6 0.4 3681.74 2727.21 383.428 284.021 0.0 0.0
10.8 0.45 3841.29 2845.4 399.337 295.805 0.0 0.0
12.0 0.5 3634.74 2692.4 426.452 315.89 0.0 0.0
13.2 0.55 3450.84 2556.18 462.088 342.288 0.0 0.0
14.4 0.6 3345.66 2478.27 514.589 381.177 0.0 0.0
15.6 0.65 3003.66 2224.94 547.949 405.888 0.0 0.0
16.8 0.7 2598.2 1924.59 580.806 430.226 0.0 0.0
18.0 0.75 2376.93 1760.69 635.734 470.914 0.0 0.0
19.2 0.8 1610.41 1192.89 643.311 476.527 0.0 0.0
20.4 0.85 1153.64 854.545 687.073 508.943 0.0 0.0
21.6 0.9 654.049 484.481 727.935 539.211 0.0 0.0
22.8 0.95 18.2273 13.5017 752.839 557.659 0.0 0.0
24.0 1.0 -617.07 -457.09 775.228 574.243 0.0 0.0

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 1
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum Shears
- ULS factor: 1.35 SLS factor: 1.0

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 23
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Traffic gr1a UDL - for Shear design 1


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 0.0 0.0 398.086 294.878 0.0 0.0
1.2 0.05 428.962 317.749 350.35 259.518 0.0 0.0
2.4 0.1 790.315 585.418 320.089 237.103 0.0 0.0
3.6 0.15 995.18 737.17 264.183 195.691 0.0 0.0
4.8 0.2 1188.65 880.479 239.053 177.076 0.0 0.0
6.0 0.25 1291.8 956.892 215.293 159.477 0.0 0.0
7.2 0.3 1276.74 945.734 172.167 127.531 0.0 0.0
8.4 0.35 1360.68 1007.91 148.895 110.292 0.0 0.0
9.6 0.4 1358.84 1006.55 131.29 97.2515 0.0 0.0
10.8 0.45 688.009 509.637 145.73 107.948 0.0 0.0
12.0 0.5 628.201 465.334 167.466 124.049 0.0 0.0
13.2 0.55 557.478 412.946 188.308 139.487 0.0 0.0
14.4 0.6 596.708 442.006 231.491 171.475 0.0 0.0
15.6 0.65 496.939 368.103 252.29 186.882 0.0 0.0
16.8 0.7 311.788 230.954 276.242 204.624 0.0 0.0
18.0 0.75 138.228 102.391 330.25 244.629 0.0 0.0
19.2 0.8 -185.46 -137.38 358.138 265.288 0.0 0.0
20.4 0.85 -559.65 -414.56 386.677 286.427 0.0 0.0
21.6 0.9 -961.53 -712.25 446.846 330.997 0.0 0.0
22.8 0.95 -1493.3 -1106.2 478.44 354.4 0.0 0.0
24.0 1.0 -2076.3 -1538.0 509.729 377.577 0.0 0.0

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 1
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum Shears
- ULS factor: 1.35 SLS factor: 1.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 24
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Traffic gr1b-gr5 - for Shear design 1


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 0.0 0.0 540.0 400.0 0.0 0.0
1.2 0.05 584.067 432.642 486.716 360.53 0.0 0.0
2.4 0.1 1104.44 818.103 460.165 340.863 0.0 0.0
3.6 0.15 1467.21 1086.83 407.563 301.899 0.0 0.0
4.8 0.2 1893.69 1402.73 394.456 292.19 0.0 0.0
6.0 0.25 2211.59 1638.21 368.5 272.963 0.0 0.0
7.2 0.3 2287.86 1694.71 317.835 235.433 0.0 0.0
8.4 0.35 2512.06 1860.79 299.049 221.518 0.0 0.0
9.6 0.4 2687.26 1990.56 271.918 201.421 0.0 0.0
10.8 0.45 2687.6 1990.81 277.894 205.847 0.0 0.0
12.0 0.5 2596.95 1923.67 301.582 223.394 0.0 0.0
13.2 0.55 2400.33 1778.02 318.824 236.166 0.0 0.0
14.4 0.6 2422.56 1794.49 364.158 269.746 0.0 0.0
15.6 0.65 2080.82 1541.35 374.688 277.547 0.0 0.0
16.8 0.7 1802.13 1334.91 396.026 293.353 0.0 0.0
18.0 0.75 1653.69 1224.95 436.651 323.445 0.0 0.0
19.2 0.8 1292.8 957.631 455.79 337.622 0.0 0.0
20.4 0.85 901.794 667.995 474.129 351.207 0.0 0.0
21.6 0.9 486.229 360.169 491.557 364.116 0.0 0.0
22.8 0.95 64.649 47.8882 507.441 375.882 0.0 0.0
24.0 1.0 -352.64 -261.22 521.553 386.336 0.0 0.0

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 1
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum Shears
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 25
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

- ULS factor: 1.35 SLS factor: 1.0

--------------------------------------------------------------------------------

ANALYSIS DATA

Data for loss calculations

Shrinkage strain is calculated from the data provided.


Creep coefficient is calculated from the data provided.
Differential shrinkage is calculated from the data provided.
Percentage of total long term loss which occurs before the section is
made composite is 30.0 %

Age at start of drying shrinkage = 1.0 day


Ambient relative humidity = 80.0 %
Ambient temperature = 20.0 °C
Maximum Curing temperature = 20.0 °C

Creep calculations are based upon EN 1992-1-1

Data for shear calculations

Material property for transverse reinforcement: MP3: Grade 500 Es 200.0


Angle between concrete strut and beam axis, θ = 21.8014°
Angle between shear reinforcement and beam axis, α = 90.0°
Enhancement close to supports is included
Dimension from left support c/l to face of support = 0.0 m
Dimension from right support c/l to face of support = 0.0 m
Surface condition for precast / in-situ interface = Smooth
Longitudinal force ratio β is calculated
Angle for compression strut in slab, θf = 38.6598°

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 26
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

DESIGN BEAM - SB2: SPAN 2


--------------------------------------------------------------------------------

BEAM DEFINITION

EN 1992-2 Pre-tensioned Prestressed Beam


With recom m ended NDP values

Total length of pre-tensioned beam : 24 m


Distance from left support to beam end face : 0 m
Distance from right support to beam end face : 0 m
Total distance between supports : 24 m

Beam section varies along length of beam.

Number of different sections : 3


No. of longitudinal construction stages : 2
No. of superimposed construction stages : 1

Section 1

Precast beam:
Precast beam is standard section: U12 Beam
Property set: MP2: C40/50 Ecm 35.2
Age of beam at transfer: 4.0 days
Corresponding concrete strength at transfer: 23.8094 MPa

In situ concrete - stage 1A:


In situ is from non-standard section: Rectangle
Property set: MP2: C40/50 Ecm 35.2
Age of beam when stage 1A concrete is cast: 14 days

Shear resistance width: 326.0 mm

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 27
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Section 2

Precast beam:
Precast beam is standard section: U12 Beam
Property set: MP2: C40/50 Ecm 35.2
Age of beam at transfer: 4.0 days
Corresponding concrete strength at transfer: 23.8094 MPa

In situ concrete - stage 1B:


In situ is from non-standard section: Rectangle
Property set: MP2: C40/50 Ecm 35.2
Age of beam when stage 1B concrete is cast: 30 days

Shear resistance width: 326.0 mm

Section 3

Precast beam:
Precast beam is standard section: U12 Beam
Property set: MP2: C40/50 Ecm 35.2
Age of beam at transfer: 4.0 days
Corresponding concrete strength at transfer: 23.8094 MPa

In situ concrete - stage 1B:


In situ is from non-standard section: Rectangle
Property set: MP2: C40/50 Ecm 35.2
Age of beam when stage 1B concrete is cast: 30 days

Shear resistance width: 326.0 mm

Tendons
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 28
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

—————————————————————————————————————————————————————————————————————————————
y-z coordinates area transmission coeffients φ draw-in property type
mm mm² α 1 α2 η p1 η1 η p2 mm mm/beam ref
—————————————————————————————————————————————————————————————————————————————
-380.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-340.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-300.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-250.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-200.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
-150.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
-100.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
-50.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
-6.E-14 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
50.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
100.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
150.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
200.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
250.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
300.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
340.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
380.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-100.0 110.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-50.0 110.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-6.E-14 110.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
50.0 110.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
100.0 110.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-450.0 210.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-350.0 210.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
350.0 210.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
450.0 210.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-606.0 1500.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-471.0 1500.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
471.0 1500.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 29
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

606.0 1500.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress

Debonded Tendons
———————————————————————————————————————————————————
y-z coordinates distance from left end (m)
mm start end
———————————————————————————————————————————————————
-200.0 60.0 1.5 22.5
-150.0 60.0 1.5 22.5
-100.0 60.0 2.0 22.0
-50.0 60.0 2.0 22.0
-6.E-14 60.0 1.5 22.5
50.0 60.0 2.0 22.0
100.0 60.0 2.0 22.0
150.0 60.0 1.5 22.5
200.0 60.0 1.5 22.5

Reinforcem ent
————————————————————————————————————————————————————————————————————
y-z coordinates diameter Property Start End Length
mm mm ref m m m
————————————————————————————————————————————————————————————————————
900.0 1734.0 32.0 MP3 20.4 24.0 3.6
700.0 1734.0 32.0 MP3 20.4 24.0 3.6
500.0 1734.0 32.0 MP3 20.4 24.0 3.6
300.0 1734.0 32.0 MP3 20.4 24.0 3.6
100.0 1734.0 32.0 MP3 20.4 24.0 3.6
-100.0 1734.0 32.0 MP3 20.4 24.0 3.6
-300.0 1734.0 32.0 MP3 20.4 24.0 3.6
-500.0 1734.0 32.0 MP3 20.4 24.0 3.6
-700.0 1734.0 32.0 MP3 20.4 24.0 3.6

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 30
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

-900.0 1734.0 32.0 MP3 20.4 24.0 3.6


900.0 1734.0 32.0 MP3 0.0 3.6 3.6
700.0 1734.0 32.0 MP3 0.0 3.6 3.6
500.0 1734.0 32.0 MP3 0.0 3.6 3.6
300.0 1734.0 32.0 MP3 0.0 3.6 3.6
100.0 1734.0 32.0 MP3 0.0 3.6 3.6
-100.0 1734.0 32.0 MP3 0.0 3.6 3.6
-300.0 1734.0 32.0 MP3 0.0 3.6 3.6
-500.0 1734.0 32.0 MP3 0.0 3.6 3.6
-700.0 1734.0 32.0 MP3 0.0 3.6 3.6
-900.0 1734.0 32.0 MP3 0.0 3.6 3.6

Location of sections

Position along span


from left support: Section
dimension (m) proportion
0.0 0.0 2 Section 2
3.5999999 0.15 2 Section 2
3.5999999 0.15 1 Section 1
20.4 0.85 1 Section 1
20.4 0.85 3 Section 3
24.0 1.0 3 Section 3

--------------------------------------------------------------------------------
PRE-TENSIONED BEAM LOADING DATA

Differential tem perature secondary loads - heating


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 31
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

0.0 0.0 1234.14 822.763 12.8981 8.59872 0.0 0.0


1.2 0.05 1218.67 812.446 12.8981 8.59872 0.0 0.0
2.4 0.1 1203.19 802.126 12.8989 8.59929 0.0 0.0
3.6 0.15 1187.71 791.808 12.9048 8.60321 0.0 0.0
4.8 0.2 1172.22 781.479 12.8955 8.59701 0.0 0.0
6.0 0.25 1156.76 771.175 12.8839 8.58927 0.0 0.0
7.2 0.3 1141.3 760.864 12.8931 8.59538 0.0 0.0
8.4 0.35 1125.82 750.546 12.9077 8.60514 0.0 0.0
9.6 0.4 1110.32 740.212 12.8717 8.58114 0.0 0.0
10.8 0.45 1094.93 729.951 12.8778 8.58521 0.0 0.0
12.0 0.5 1079.41 719.607 12.8735 8.58236 0.0 0.0
13.2 0.55 1064.03 709.354 12.8882 8.59212 0.0 0.0
14.4 0.6 1048.48 698.986 12.8815 8.58765 0.0 0.0
15.6 0.65 1033.11 688.743 12.8412 8.56079 0.0 0.0
16.8 0.7 1017.66 678.44 12.8699 8.57992 0.0 0.0
18.0 0.75 1002.23 668.151 12.8589 8.57259 0.0 0.0
19.2 0.8 986.799 657.866 12.8659 8.57727 0.0 0.0
20.4 0.85 971.349 647.566 12.8687 8.5791 0.0 0.0
21.6 0.9 955.915 637.276 12.8626 8.57506 0.0 0.0
22.8 0.95 940.479 626.986 12.8606 8.57376 0.0 0.0
24.0 1.0 925.049 616.699 12.8606 8.57376 0.0 0.0

These actions are transferred from the following analysis run:

Location: Span 2
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Linebeam with Temperature or Shrinkage
- ULS factor: 1.5 SLS factor: 1.0

Differential tem perature secondary loads - cooling


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 32
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

0.0 0.0 -432.74 -288.49 4.38032 2.92021 0.0 0.0


1.2 0.05 -427.48 -284.99 4.38032 2.92021 0.0 0.0
2.4 0.1 -422.22 -281.48 4.38099 2.92066 0.0 0.0
3.6 0.15 -416.97 -277.98 4.37943 2.91962 0.0 0.0
4.8 0.2 -411.71 -274.48 4.37088 2.91392 0.0 0.0
6.0 0.25 -406.48 -270.98 4.37271 2.91514 0.0 0.0
7.2 0.3 -401.22 -267.48 4.38248 2.92165 0.0 0.0
8.4 0.35 -395.96 -263.97 4.38095 2.92063 0.0 0.0
9.6 0.4 -390.7 -260.47 4.37836 2.9189 0.0 0.0
10.8 0.45 -385.45 -256.97 4.36584 2.91056 0.0 0.0
12.0 0.5 -380.23 -253.48 4.36615 2.91077 0.0 0.0
13.2 0.55 -374.97 -249.98 4.37317 2.91545 0.0 0.0
14.4 0.6 -369.73 -246.49 4.36798 2.91199 0.0 0.0
15.6 0.65 -364.49 -242.99 4.37195 2.91463 0.0 0.0
16.8 0.7 -359.24 -239.49 4.36768 2.91178 0.0 0.0
18.0 0.75 -354.01 -236.0 4.36646 2.91097 0.0 0.0
19.2 0.8 -348.76 -232.51 4.36699 2.91133 0.0 0.0
20.4 0.85 -343.53 -229.02 4.3644 2.9096 0.0 0.0
21.6 0.9 -338.28 -225.52 4.36649 2.911 0.0 0.0
22.8 0.95 -333.05 -222.03 4.36543 2.91028 0.0 0.0
24.0 1.0 -327.81 -218.54 4.36543 2.91028 0.0 0.0

These actions are transferred from the following analysis run:

Location: Span 2
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Linebeam with Temperature or Shrinkage
- ULS factor: 1.5 SLS factor: 1.0

Shrinkage and creep secondary effects


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 33
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

0.0 0.0 -200.33 -148.39 2.58297 1.91331 0.0 0.0


1.2 0.05 -197.23 -146.1 2.58297 1.91331 0.0 0.0
2.4 0.1 -194.13 -143.8 2.58416 1.9142 0.0 0.0
3.6 0.15 -191.03 -141.5 2.58476 1.91464 0.0 0.0
4.8 0.2 -187.93 -139.21 2.58922 1.91794 0.0 0.0
6.0 0.25 -184.82 -136.9 2.58268 1.9131 0.0 0.0
7.2 0.3 -181.73 -134.62 2.57664 1.90862 0.0 0.0
8.4 0.35 -178.63 -132.32 2.5835 1.91371 0.0 0.0
9.6 0.4 -175.53 -130.02 2.5833 1.91355 0.0 0.0
10.8 0.45 -172.43 -127.73 2.6028 1.928 0.0 0.0
12.0 0.5 -169.28 -125.4 2.6109 1.934 0.0 0.0
13.2 0.55 -166.17 -123.09 2.60115 1.92678 0.0 0.0
14.4 0.6 -163.04 -120.77 2.62038 1.94102 0.0 0.0
15.6 0.65 -159.88 -118.43 2.6245 1.94407 0.0 0.0
16.8 0.7 -156.74 -116.11 2.62079 1.94132 0.0 0.0
18.0 0.75 -153.59 -113.77 2.63186 1.94952 0.0 0.0
19.2 0.8 -150.43 -111.43 2.62976 1.94797 0.0 0.0
20.4 0.85 -147.28 -109.09 2.6281 1.94674 0.0 0.0
21.6 0.9 -144.12 -106.76 2.63209 1.9497 0.0 0.0
22.8 0.95 -140.96 -104.41 2.63212 1.94972 0.0 0.0
24.0 1.0 -137.8 -102.08 2.63212 1.94972 0.0 0.0

These actions are transferred from the following analysis run:

Location: Span 2
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Linebeam with Temperature or Shrinkage
- ULS factor: 1.35 SLS factor: 1.0

Settlem ent of supports


- none defined -

Beam Erection
Actions are defined for the distance between supports
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 34
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Span Location Bending Moment Shear Force Axial Force


(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 0.0 0.0 320.252 237.224 0.0 0.0
1.2 0.05 365.041 270.401 288.19 213.474 0.0 0.0
2.4 0.1 691.604 512.299 256.191 189.771 0.0 0.0
3.6 0.15 979.807 725.783 224.213 166.083 0.0 0.0
4.8 0.2 1229.56 910.783 192.15 142.333 0.0 0.0
6.0 0.25 1440.79 1067.25 160.214 118.677 0.0 0.0
7.2 0.3 1613.84 1195.44 128.067 94.8647 0.0 0.0
8.4 0.35 1748.25 1295.0 96.2579 71.3021 0.0 0.0
9.6 0.4 1844.69 1366.44 63.9423 47.3647 0.0 0.0
10.8 0.45 1902.15 1409.0 32.3017 23.9272 0.0 0.0
12.0 0.5 1921.81 1423.56 0.15480 0.11466 0.0 0.0
13.2 0.55 1902.7 1409.41 32.0764 23.7603 0.0 0.0
14.4 0.6 1844.78 1366.5 64.139 47.5104 0.0 0.0
15.6 0.65 1748.67 1295.31 96.2436 71.2916 0.0 0.0
16.8 0.7 1614.18 1195.69 128.433 95.1353 0.0 0.0
18.0 0.75 1440.87 1067.31 160.242 118.698 0.0 0.0
19.2 0.8 1229.37 910.643 192.094 142.292 0.0 0.0
20.4 0.85 979.533 725.58 224.03 165.948 0.0 0.0
21.6 0.9 691.572 512.276 256.113 189.713 0.0 0.0
22.8 0.95 365.006 270.375 288.15 213.444 0.0 0.0
24.0 1.0 0.0 0.0 320.184 237.174 0.0 0.0

These actions are transferred from the following analysis run:

Location: Span 2
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Linebeam with Erection of beam
- ULS factor: 1.35 SLS factor: 1.0

Construction stage 1A
Actions are defined for the distance between supports
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 35
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Span Location Bending Moment Shear Force Axial Force


(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 0.0 0.0 110.508 81.8574 0.0 0.0
1.2 0.05 132.601 98.2227 110.51 81.8594 0.0 0.0
2.4 0.1 265.201 196.445 110.542 81.8828 0.0 0.0
3.6 0.15 397.831 294.689 110.561 81.8969 0.0 0.0
4.8 0.2 521.008 385.932 94.7404 70.1781 0.0 0.0
6.0 0.25 625.147 463.072 79.0046 58.5219 0.0 0.0
7.2 0.3 710.44 526.252 63.1631 46.7875 0.0 0.0
8.4 0.35 776.801 575.408 47.385 35.1 0.0 0.0
9.6 0.4 824.241 610.549 31.6069 23.4125 0.0 0.0
10.8 0.45 852.654 631.596 15.8498 11.7406 0.0 0.0
12.0 0.5 862.336 638.768 0.01265 0.00937 0.0 0.0
13.2 0.55 852.844 631.736 15.8119 11.7125 0.0 0.0
14.4 0.6 824.283 610.58 31.59 23.4 0.0 0.0
15.6 0.65 776.906 575.486 47.3892 35.1031 0.0 0.0
16.8 0.7 710.588 526.361 63.2517 46.8531 0.0 0.0
18.0 0.75 625.179 463.096 78.9666 58.4937 0.0 0.0
19.2 0.8 520.913 385.861 94.7447 70.1812 0.0 0.0
20.4 0.85 397.712 294.602 110.447 81.8125 0.0 0.0
21.6 0.9 265.201 196.445 110.521 81.8672 0.0 0.0
22.8 0.95 132.596 98.2192 110.495 81.848 0.0 0.0
24.0 1.0 0.0 0.0 110.495 81.848 0.0 0.0

These actions are transferred from the following analysis run:

Location: Span 2
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Linebeam with Construction stage 1A
- ULS factor: 1.35 SLS factor: 1.0

Construction stage 1B
Actions are defined for the distance between supports
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 36
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Span Location Bending Moment Shear Force Axial Force


(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 -70.426 -52.167 47.2342 34.9883 0.0 0.0
1.2 0.05 -23.222 -17.201 31.4391 23.2882 0.0 0.0
2.4 0.1 5.02824 3.72462 15.644 11.5881 0.0 0.0
3.6 0.15 14.3246 10.6108 0.15016 0.11123 0.0 0.0
4.8 0.2 14.1431 10.4764 0.14815 0.10974 0.0 0.0
6.0 0.25 13.9641 10.3438 0.15128 0.11206 0.0 0.0
7.2 0.3 13.7802 10.2076 0.14658 0.10858 0.0 0.0
8.4 0.35 13.6009 10.0747 0.14740 0.10919 0.0 0.0
9.6 0.4 13.4208 9.94135 0.14666 0.10864 0.0 0.0
10.8 0.45 13.2432 9.80981 0.14452 0.10705 0.0 0.0
12.0 0.5 13.0656 9.67822 0.14749 0.10925 0.0 0.0
13.2 0.55 12.8898 9.54803 0.14765 0.10937 0.0 0.0
14.4 0.6 12.7139 9.41772 0.14633 0.10839 0.0 0.0
15.6 0.65 12.54 9.28888 0.14848 0.10998 0.0 0.0
16.8 0.7 12.3622 9.15717 0.14188 0.10510 0.0 0.0
18.0 0.75 12.1917 9.03088 0.14567 0.10791 0.0 0.0
19.2 0.8 12.0187 8.90277 0.14633 0.10839 0.0 0.0
20.4 0.85 11.8435 8.77297 0.14319 0.10606 0.0 0.0
21.6 0.9 2.19448 1.62554 15.9387 11.8064 0.0 0.0
22.8 0.95 -26.409 -19.562 31.734 23.5067 0.0 0.0
24.0 1.0 -73.967 -54.79 47.529 35.2067 0.0 0.0

These actions are transferred from the following analysis run:

Location: Span 2
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Linebeam with Construction stage 1B
- ULS factor: 1.35 SLS factor: 1.0

Construction stage 2
- none defined -
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 37
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Construction stage 3
- none defined -

Surfacing 1
Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 -228.35 -190.29 55.1583 45.9653 0.0 0.0
1.2 0.05 -165.32 -137.77 49.8879 41.5733 0.0 0.0
2.4 0.1 -108.62 -90.517 44.6159 37.1799 0.0 0.0
3.6 0.15 -58.246 -48.538 39.3505 32.7921 0.0 0.0
4.8 0.2 -14.19 -11.825 34.0813 28.4011 0.0 0.0
6.0 0.25 23.5342 19.6118 28.8219 24.0183 0.0 0.0
7.2 0.3 54.9551 45.7959 23.5233 19.6027 0.0 0.0
8.4 0.35 80.0306 66.6922 18.2651 15.2209 0.0 0.0
9.6 0.4 98.7771 82.3142 13.0122 10.8435 0.0 0.0
10.8 0.45 111.216 92.6797 7.75337 6.46114 0.0 0.0
12.0 0.5 117.34 97.7832 2.4729 2.06075 0.0 0.0
13.2 0.55 117.151 97.6262 2.80933 2.34111 0.0 0.0
14.4 0.6 110.62 92.1831 8.05113 6.70928 0.0 0.0
15.6 0.65 97.8 81.5 13.3445 11.1204 0.0 0.0
16.8 0.7 78.629 65.5242 18.6027 15.5022 0.0 0.0
18.0 0.75 53.151 44.2925 23.8738 19.8948 0.0 0.0
19.2 0.8 21.3492 17.791 29.1513 24.2928 0.0 0.0
20.4 0.85 -16.784 -13.987 34.4087 28.6739 0.0 0.0
21.6 0.9 -61.237 -51.031 39.6758 33.0631 0.0 0.0
22.8 0.95 -112.01 -93.343 44.9483 37.457 0.0 0.0
24.0 1.0 -169.11 -140.93 50.2187 41.849 0.0 0.0

These actions are transferred from the following analysis run:

Location: Span 2
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 38
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Analysis time: 5/1/2018 11:10:52 AM


Analysis Loadcase - Linebeam with Superimposed dead load
- ULS factor: 1.2 SLS factor: 1.0

Traffic gr1a TS - for Bending design 1 : [Max +ve]


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 288.573 213.758 69.3145 51.3441 0.0 0.0
1.2 0.05 336.348 249.146 365.869 271.014 0.0 0.0
2.4 0.1 848.157 628.265 430.528 318.91 0.0 0.0
3.6 0.15 1444.15 1069.74 653.884 484.359 0.0 0.0
4.8 0.2 1926.33 1426.91 260.343 192.846 0.0 0.0
6.0 0.25 2324.35 1721.74 270.657 200.487 0.0 0.0
7.2 0.3 2732.52 2024.09 487.028 360.761 0.0 0.0
8.4 0.35 3004.03 2225.2 126.158 93.45 0.0 0.0
9.6 0.4 3157.17 2338.64 304.448 225.517 0.0 0.0
10.8 0.45 3330.77 2467.24 31.6517 23.4457 0.0 0.0
12.0 0.5 3362.15 2490.48 6.574 4.86963 0.0 0.0
13.2 0.55 3316.74 2456.84 44.6685 33.0878 0.0 0.0
14.4 0.6 3182.78 2357.61 336.204 249.04 0.0 0.0
15.6 0.65 2927.99 2168.88 328.402 243.261 0.0 0.0
16.8 0.7 2685.07 1988.94 175.455 129.966 0.0 0.0
18.0 0.75 2314.55 1714.48 508.415 376.604 0.0 0.0
19.2 0.8 1855.79 1374.66 289.705 214.596 0.0 0.0
20.4 0.85 1395.48 1033.69 296.297 219.479 0.0 0.0
21.6 0.9 843.955 625.152 668.154 494.929 0.0 0.0
22.8 0.95 327.694 242.737 17.6287 13.0583 0.0 0.0
24.0 1.0 348.847 258.406 17.6287 13.0583 0.0 0.0

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 39
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Location: Span 2
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum -ve Moments
- ULS factor: 1.35 SLS factor: 1.0

Traffic gr1a UDL - for Bending design 1 : [Max +ve]


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 198.487 147.027 186.305 138.003 0.0 0.0
1.2 0.05 175.921 130.312 11.5759 8.57476 0.0 0.0
2.4 0.1 256.4 189.926 122.752 90.9277 0.0 0.0
3.6 0.15 466.878 345.836 239.01 177.044 0.0 0.0
4.8 0.2 776.444 575.144 265.909 196.969 0.0 0.0
6.0 0.25 1077.01 797.783 233.386 172.878 0.0 0.0
7.2 0.3 1328.43 984.025 200.931 148.838 0.0 0.0
8.4 0.35 1521.42 1126.98 135.93 100.689 0.0 0.0
9.6 0.4 1664.87 1233.23 103.579 76.7254 0.0 0.0
10.8 0.45 1758.88 1302.87 38.7893 28.7328 0.0 0.0
12.0 0.5 1794.69 1329.4 6.574 4.86963 0.0 0.0
13.2 0.55 1781.4 1319.56 115.514 85.5657 0.0 0.0
14.4 0.6 1717.57 1272.27 763.474 565.536 0.0 0.0
15.6 0.65 1596.66 1182.71 780.484 578.136 0.0 0.0
16.8 0.7 1426.55 1056.7 506.96 375.526 0.0 0.0
18.0 0.75 1204.79 892.439 1237.84 916.921 0.0 0.0
19.2 0.8 926.83 686.541 832.882 616.95 0.0 0.0
20.4 0.85 655.471 485.534 767.696 568.664 0.0 0.0
21.6 0.9 490.95 363.667 1431.3 1060.22 0.0 0.0
22.8 0.95 444.484 329.247 2.78273 2.06128 0.0 0.0
24.0 1.0 498.247 369.072 70.2201 52.0149 0.0 0.0

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 40
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Location: Span 2
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum -ve Moments
- ULS factor: 1.35 SLS factor: 1.0

Traffic gr1b-gr5 - for Bending design 1 : [Max +ve]


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 192.837 142.843 46.3192 34.3105 0.0 0.0
1.2 0.05 283.101 209.704 10.2563 7.59728 0.0 0.0
2.4 0.1 644.878 477.688 455.898 337.702 0.0 0.0
3.6 0.15 1021.88 756.946 466.71 345.711 0.0 0.0
4.8 0.2 1313.3 972.812 122.334 90.6178 0.0 0.0
6.0 0.25 1638.33 1213.58 409.888 303.62 0.0 0.0
7.2 0.3 1923.88 1425.09 386.088 285.991 0.0 0.0
8.4 0.35 2047.52 1516.68 44.4501 32.926 0.0 0.0
9.6 0.4 2211.13 1637.88 268.16 198.637 0.0 0.0
10.8 0.45 2366.31 1752.82 240.431 178.097 0.0 0.0
12.0 0.5 2307.49 1709.25 215.704 159.781 0.0 0.0
13.2 0.55 2273.06 1683.75 96.32 71.3482 0.0 0.0
14.4 0.6 2232.33 1653.58 328.232 243.135 0.0 0.0
15.6 0.65 2042.87 1513.24 353.028 261.502 0.0 0.0
16.8 0.7 1833.72 1358.31 73.6767 54.5753 0.0 0.0
18.0 0.75 1613.37 1195.09 412.902 305.853 0.0 0.0
19.2 0.8 1283.08 950.428 435.82 322.83 0.0 0.0
20.4 0.85 984.821 729.497 48.8334 36.1729 0.0 0.0
21.6 0.9 662.71 490.896 496.852 368.039 0.0 0.0
22.8 0.95 219.82 162.83 11.8254 8.75956 0.0 0.0
24.0 1.0 234.009 173.34 11.8254 8.75956 0.0 0.0

The actions are factored for transverse distribution.


Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 41
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

These actions are transferred from the following analysis run:

Location: Span 2
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum -ve Moments
- ULS factor: 1.35 SLS factor: 1.0

Traffic gr1a TS - for Bending design 2 : [Max -ve]


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 -1589.3 -1177.2 80.8812 59.912 0.0 0.0
1.2 0.05 -1492.2 -1105.3 80.8824 59.9129 0.0 0.0
2.4 0.1 -1395.1 -1033.4 80.8943 59.9217 0.0 0.0
3.6 0.15 -1298.0 -961.48 80.7694 59.8292 0.0 0.0
4.8 0.2 -1201.1 -889.67 80.8379 59.8799 0.0 0.0
6.0 0.25 -1104.1 -817.83 80.8896 59.9182 0.0 0.0
7.2 0.3 -1006.9 -745.89 80.8328 59.8762 0.0 0.0
8.4 0.35 -910.0 -674.07 80.8442 59.8846 0.0 0.0
9.6 0.4 -812.95 -602.19 80.7413 59.8084 0.0 0.0
10.8 0.45 -716.07 -530.42 80.6574 59.7462 0.0 0.0
12.0 0.5 -619.23 -458.69 80.6328 59.728 0.0 0.0
13.2 0.55 -626.82 -464.31 69.5363 51.5084 0.0 0.0
14.4 0.6 -710.21 -526.08 69.6156 51.5671 0.0 0.0
15.6 0.65 -793.76 -587.97 69.5692 51.5328 0.0 0.0
16.8 0.7 -877.23 -649.8 69.5959 51.5525 0.0 0.0
18.0 0.75 -960.73 -711.65 69.6606 51.6005 0.0 0.0
19.2 0.8 -1044.3 -773.57 69.6764 51.6121 0.0 0.0
20.4 0.85 -1127.9 -835.5 69.6748 51.6109 0.0 0.0
21.6 0.9 -1211.5 -897.44 69.6807 51.6153 0.0 0.0
22.8 0.95 -1295.2 -959.37 69.6692 51.6068 0.0 0.0
24.0 1.0 -1378.8 -1021.3 69.6692 51.6068 0.0 0.0

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 42
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 2
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum +ve Moments
- ULS factor: 1.35 SLS factor: 1.0

Traffic gr1a UDL - for Bending design 2 : [Max -ve]


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 -2086.6 -1545.7 517.58 383.393 0.0 0.0
1.2 0.05 -1543.1 -1143.1 395.065 292.641 0.0 0.0
2.4 0.1 -1153.8 -854.69 250.892 185.846 0.0 0.0
3.6 0.15 -943.58 -698.95 107.005 79.2627 0.0 0.0
4.8 0.2 -889.76 -659.08 10.1689 7.53254 0.0 0.0
6.0 0.25 -877.57 -650.06 10.1823 7.54245 0.0 0.0
7.2 0.3 -865.29 -640.96 10.1352 7.50754 0.0 0.0
8.4 0.35 -853.14 -631.95 10.1398 7.51097 0.0 0.0
9.6 0.4 -840.91 -622.9 10.0249 7.42582 0.0 0.0
10.8 0.45 -828.87 -613.98 9.92745 7.35367 0.0 0.0
12.0 0.5 -816.92 -605.13 9.91577 7.34501 0.0 0.0
13.2 0.55 -804.94 -596.25 129.231 95.7269 0.0 0.0
14.4 0.6 -793.07 -587.46 129.467 95.9018 0.0 0.0
15.6 0.65 -781.39 -578.8 129.309 95.7846 0.0 0.0
16.8 0.7 -769.61 -570.08 129.416 95.8634 0.0 0.0
18.0 0.75 -757.87 -561.39 129.608 96.0059 0.0 0.0
19.2 0.8 -746.22 -552.76 129.667 96.0499 0.0 0.0
20.4 0.85 -790.25 -585.37 238.07 176.348 0.0 0.0
21.6 0.9 -993.62 -736.02 375.84 278.4 0.0 0.0
22.8 0.95 -1370.3 -1015.0 532.119 394.162 0.0 0.0
24.0 1.0 -1897.3 -1405.4 614.673 455.313 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 43
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 2
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum +ve Moments
- ULS factor: 1.35 SLS factor: 1.0

Traffic gr1b-gr5 - for Bending design 2 : [Max -ve]


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 -1067.0 -790.4 54.3055 40.2263 0.0 0.0
1.2 0.05 -1001.9 -742.13 54.3046 40.2257 0.0 0.0
2.4 0.1 -936.7 -693.86 54.3188 40.2361 0.0 0.0
3.6 0.15 -871.49 -645.55 54.2293 40.1699 0.0 0.0
4.8 0.2 -806.41 -597.34 54.2787 40.2065 0.0 0.0
6.0 0.25 -741.29 -549.1 54.307 40.2274 0.0 0.0
7.2 0.3 -676.08 -500.8 54.2764 40.2047 0.0 0.0
8.4 0.35 -610.98 -452.58 54.2764 40.2047 0.0 0.0
9.6 0.4 -545.82 -404.31 54.2081 40.1542 0.0 0.0
10.8 0.45 -480.78 -356.13 54.1563 40.1158 0.0 0.0
12.0 0.5 -415.77 -307.98 54.1493 40.1106 0.0 0.0
13.2 0.55 -418.87 -310.28 46.4669 34.42 0.0 0.0
14.4 0.6 -474.59 -351.55 46.5188 34.4584 0.0 0.0
15.6 0.65 -530.43 -392.91 46.4892 34.4364 0.0 0.0
16.8 0.7 -586.2 -434.23 46.5089 34.4511 0.0 0.0
18.0 0.75 -642.0 -475.56 46.5558 34.4858 0.0 0.0
19.2 0.8 -697.86 -516.93 46.5576 34.4871 0.0 0.0
20.4 0.85 -753.73 -558.32 46.5597 34.4886 0.0 0.0
21.6 0.9 -809.6 -599.71 46.5647 34.4924 0.0 0.0
22.8 0.95 -865.48 -641.1 46.5558 34.4858 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 44
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

24.0 1.0 -921.35 -682.48 46.5558 34.4858 0.0 0.0

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 2
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum +ve Moments
- ULS factor: 1.35 SLS factor: 1.0

Traffic gr1a TS - for Shear design 1


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 -382.72 -283.5 780.608 578.228 0.0 0.0
1.2 0.05 127.163 94.1949 738.897 547.331 0.0 0.0
2.4 0.1 646.195 478.663 691.571 512.275 0.0 0.0
3.6 0.15 1241.08 919.318 657.696 487.183 0.0 0.0
4.8 0.2 1777.9 1316.96 622.579 461.17 0.0 0.0
6.0 0.25 2251.52 1667.8 586.542 434.475 0.0 0.0
7.2 0.3 2659.04 1969.66 549.766 407.234 0.0 0.0
8.4 0.35 2841.41 2104.75 493.483 365.543 0.0 0.0
9.6 0.4 3091.17 2289.75 455.627 337.502 0.0 0.0
10.8 0.45 2999.34 2221.73 388.925 288.093 0.0 0.0
12.0 0.5 2981.56 2208.56 341.16 252.711 0.0 0.0
13.2 0.55 3062.18 2268.28 401.75 297.592 0.0 0.0
14.4 0.6 3140.72 2326.46 468.647 347.146 0.0 0.0
15.6 0.65 2876.57 2130.79 506.516 375.197 0.0 0.0
16.8 0.7 2536.86 1879.16 526.636 390.101 0.0 0.0
18.0 0.75 2266.05 1678.55 598.435 443.286 0.0 0.0
19.2 0.8 1784.0 1321.48 633.853 469.521 0.0 0.0
20.4 0.85 1242.85 920.631 668.208 494.969 0.0 0.0
21.6 0.9 648.148 480.109 701.287 519.472 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 45
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

22.8 0.95 141.91 105.119 747.065 553.381 0.0 0.0


24.0 1.0 -634.34 -469.88 761.101 563.779 0.0 0.0

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 2
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum Shears
- ULS factor: 1.35 SLS factor: 1.0

Traffic gr1a UDL - for Shear design 1


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 -2085.0 -1544.4 517.58 383.393 0.0 0.0
1.2 0.05 -1521.6 -1127.1 454.475 336.648 0.0 0.0
2.4 0.1 -1021.0 -756.31 423.544 313.736 0.0 0.0
3.6 0.15 -577.39 -427.69 393.369 291.384 0.0 0.0
4.8 0.2 -279.85 -207.3 336.852 249.52 0.0 0.0
6.0 0.25 -12.595 -9.3293 312.74 231.659 0.0 0.0
7.2 0.3 222.315 164.678 285.704 211.633 0.0 0.0
8.4 0.35 328.773 243.536 240.175 177.907 0.0 0.0
9.6 0.4 499.682 370.135 216.78 160.578 0.0 0.0
10.8 0.45 405.56 300.415 183.739 136.103 0.0 0.0
12.0 0.5 463.418 343.272 165.6 122.667 0.0 0.0
13.2 0.55 461.805 342.077 167.291 123.919 0.0 0.0
14.4 0.6 488.859 362.118 205.181 151.986 0.0 0.0
15.6 0.65 377.255 279.448 228.494 169.255 0.0 0.0
16.8 0.7 252.924 187.351 248.336 183.953 0.0 0.0
18.0 0.75 129.191 95.6973 298.712 221.268 0.0 0.0
19.2 0.8 -163.07 -120.8 326.044 241.514 0.0 0.0
20.4 0.85 -503.69 -373.1 354.08 262.281 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 46
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

21.6 0.9 -859.88 -636.95 413.08 305.985 0.0 0.0


22.8 0.95 -1345.8 -996.92 444.326 329.131 0.0 0.0
24.0 1.0 -1885.5 -1396.6 475.334 352.1 0.0 0.0

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 2
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum Shears
- ULS factor: 1.35 SLS factor: 1.0

Traffic gr1b-gr5 - for Shear design 1


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 -112.07 -83.012 532.253 394.261 0.0 0.0
1.2 0.05 203.523 150.758 506.898 375.48 0.0 0.0
2.4 0.1 620.926 459.945 487.603 361.187 0.0 0.0
3.6 0.15 1021.88 756.946 466.71 345.711 0.0 0.0
4.8 0.2 1146.48 849.242 409.898 303.628 0.0 0.0
6.0 0.25 1638.33 1213.58 409.888 303.62 0.0 0.0
7.2 0.3 1923.88 1425.09 386.088 285.991 0.0 0.0
8.4 0.35 1957.51 1450.01 336.972 249.609 0.0 0.0
9.6 0.4 2188.25 1620.92 318.33 235.8 0.0 0.0
10.8 0.45 2138.6 1584.15 274.437 203.286 0.0 0.0
12.0 0.5 2270.66 1681.97 259.267 192.05 0.0 0.0
13.2 0.55 2193.29 1624.66 284.325 210.611 0.0 0.0
14.4 0.6 2232.33 1653.58 328.232 243.135 0.0 0.0
15.6 0.65 2042.87 1513.24 353.028 261.502 0.0 0.0
16.8 0.7 1712.04 1268.18 365.111 270.453 0.0 0.0
18.0 0.75 1613.37 1195.09 412.902 305.853 0.0 0.0
19.2 0.8 1283.08 950.428 435.82 322.83 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 47
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

20.4 0.85 914.198 677.184 458.008 339.265 0.0 0.0


21.6 0.9 597.212 442.38 489.364 362.492 0.0 0.0
22.8 0.95 185.169 137.162 508.133 376.395 0.0 0.0
24.0 1.0 -228.47 -169.23 524.847 388.775 0.0 0.0

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 2
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum Shears
- ULS factor: 1.35 SLS factor: 1.0

--------------------------------------------------------------------------------

ANALYSIS DATA

Data for loss calculations

Shrinkage strain is calculated from the data provided.


Creep coefficient is calculated from the data provided.
Differential shrinkage is calculated from the data provided.
Percentage of total long term loss which occurs before the section is
made composite is 30.0 %

Age at start of drying shrinkage = 1.0 day


Ambient relative humidity = 80.0 %
Ambient temperature = 20.0 °C
Maximum Curing temperature = 20.0 °C

Creep calculations are based upon EN 1992-1-1

Data for shear calculations


Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 48
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Material property for transverse reinforcement: MP3: Grade 500 Es 200.0


Angle between concrete strut and beam axis, θ = 21.8014°
Angle between shear reinforcement and beam axis, α = 90.0°
Enhancement close to supports is included
Dimension from left support c/l to face of support = 0.0 m
Dimension from right support c/l to face of support = 0.0 m
Surface condition for precast / in-situ interface = Smooth
Longitudinal force ratio β is calculated
Angle for compression strut in slab, θf = 38.6598°

DESIGN BEAM - SB3: SPAN 3


--------------------------------------------------------------------------------

BEAM DEFINITION

EN 1992-2 Pre-tensioned Prestressed Beam


With recom m ended NDP values

Total length of pre-tensioned beam : 24 m


Distance from left support to beam end face : 0 m
Distance from right support to beam end face : 0 m
Total distance between supports : 24 m

Beam section varies along length of beam.

Number of different sections : 3


No. of longitudinal construction stages : 2
No. of superimposed construction stages : 1

Section 1

Precast beam:
Precast beam is standard section: U12 Beam
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 49
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Property set: MP2: C40/50 Ecm 35.2


Age of beam at transfer: 4.0 days
Corresponding concrete strength at transfer: 23.8094 MPa

In situ concrete - stage 1A:


In situ is from non-standard section: Rectangle
Property set: MP2: C40/50 Ecm 35.2
Age of beam when stage 1A concrete is cast: 14 days

Shear resistance width: 326.0 mm

Section 2

Precast beam:
Precast beam is standard section: U12 Beam
Property set: MP2: C40/50 Ecm 35.2
Age of beam at transfer: 4.0 days
Corresponding concrete strength at transfer: 23.8094 MPa

In situ concrete - stage 1B:


In situ is from non-standard section: Rectangle
Property set: MP2: C40/50 Ecm 35.2
Age of beam when stage 1B concrete is cast: 30 days

Shear resistance width: 326.0 mm

Section 3

Precast beam:
Precast beam is standard section: U12 Beam
Property set: MP2: C40/50 Ecm 35.2
Age of beam at transfer: 4.0 days
Corresponding concrete strength at transfer: 23.8094 MPa
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 50
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

In situ concrete - stage 1B:


In situ is from non-standard section: Rectangle
Property set: MP2: C40/50 Ecm 35.2
Age of beam when stage 1B concrete is cast: 30 days

Shear resistance width: 326.0 mm

Tendons
—————————————————————————————————————————————————————————————————————————————
y-z coordinates area transmission coeffients φ draw-in property type
mm mm² α 1 α2 η p1 η1 η p2 mm mm/beam ref
—————————————————————————————————————————————————————————————————————————————
-300.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-250.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-200.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-150.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-100.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-50.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-6.E-14 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
50.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
100.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
150.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
200.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
250.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
300.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-50.0 110.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-6.E-14 110.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
50.0 110.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-400.0 160.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-350.0 160.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 51
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

-300.0 160.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
300.0 160.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
350.0 160.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
400.0 160.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-450.0 210.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
-350.0 210.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
350.0 210.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
450.0 210.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
-606.0 1500.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-471.0 1500.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
471.0 1500.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
606.0 1500.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress

Debonded Tendons
———————————————————————————————————————————————————
y-z coordinates distance from left end (m)
mm start end
———————————————————————————————————————————————————
-350.0 160.0 3.0 21.0
-300.0 160.0 2.5 21.5
300.0 160.0 2.5 21.5
350.0 160.0 3.0 21.0
-450.0 210.0 3.5 20.5
-350.0 210.0 2.0 22.0
350.0 210.0 2.0 22.0
450.0 210.0 3.5 20.5

Reinforcem ent
————————————————————————————————————————————————————————————————————
y-z coordinates diameter Property Start End Length
mm mm ref m m m

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 52
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

————————————————————————————————————————————————————————————————————
900.0 1734.0 32.0 MP3 20.4 24.0 3.6
700.0 1734.0 32.0 MP3 20.4 24.0 3.6
500.0 1734.0 32.0 MP3 20.4 24.0 3.6
300.0 1734.0 32.0 MP3 20.4 24.0 3.6
100.0 1734.0 32.0 MP3 20.4 24.0 3.6
-100.0 1734.0 32.0 MP3 20.4 24.0 3.6
-300.0 1734.0 32.0 MP3 20.4 24.0 3.6
-500.0 1734.0 32.0 MP3 20.4 24.0 3.6
-700.0 1734.0 32.0 MP3 20.4 24.0 3.6
-900.0 1734.0 32.0 MP3 20.4 24.0 3.6
900.0 1734.0 32.0 MP3 0.0 3.6 3.6
700.0 1734.0 32.0 MP3 0.0 3.6 3.6
500.0 1734.0 32.0 MP3 0.0 3.6 3.6
300.0 1734.0 32.0 MP3 0.0 3.6 3.6
100.0 1734.0 32.0 MP3 0.0 3.6 3.6
-100.0 1734.0 32.0 MP3 0.0 3.6 3.6
-300.0 1734.0 32.0 MP3 0.0 3.6 3.6
-500.0 1734.0 32.0 MP3 0.0 3.6 3.6
-700.0 1734.0 32.0 MP3 0.0 3.6 3.6
-900.0 1734.0 32.0 MP3 0.0 3.6 3.6

Location of sections

Position along span


from left support: Section
dimension (m) proportion
0.0 0.0 2 Section 2
3.5999999 0.15 2 Section 2
3.5999999 0.15 1 Section 1
20.4 0.85 1 Section 1
20.4 0.85 3 Section 3
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 53
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

24.0 1.0 3 Section 3

--------------------------------------------------------------------------------
PRE-TENSIONED BEAM LOADING DATA

Differential tem perature secondary loads - heating


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 925.047 616.698 13.1353 8.75687 0.0 0.0
1.2 0.05 940.809 627.206 13.1353 8.75687 0.0 0.0
2.4 0.1 956.572 637.714 13.1343 8.75621 0.0 0.0
3.6 0.15 972.331 648.221 13.1363 8.75753 0.0 0.0
4.8 0.2 988.099 658.732 13.1567 8.77116 0.0 0.0
6.0 0.25 1003.91 669.271 13.1348 8.75651 0.0 0.0
7.2 0.3 1019.62 679.748 13.1079 8.73861 0.0 0.0
8.4 0.35 1035.37 690.244 13.1189 8.74593 0.0 0.0
9.6 0.4 1051.11 700.738 13.136 8.75732 0.0 0.0
10.8 0.45 1066.89 711.262 13.1506 8.76709 0.0 0.0
12.0 0.5 1082.67 721.779 13.1537 8.76912 0.0 0.0
13.2 0.55 1098.46 732.308 13.139 8.75936 0.0 0.0
14.4 0.6 1114.2 742.802 13.1421 8.76139 0.0 0.0
15.6 0.65 1130.0 753.335 13.1393 8.75956 0.0 0.0
16.8 0.7 1145.74 763.825 13.1503 8.76689 0.0 0.0
18.0 0.75 1161.56 774.375 13.1537 8.76912 0.0 0.0
19.2 0.8 1177.31 784.871 13.1229 8.74858 0.0 0.0
20.4 0.85 1193.06 795.372 13.127 8.75132 0.0 0.0
21.6 0.9 1208.81 805.874 13.1297 8.75313 0.0 0.0
22.8 0.95 1224.57 816.38 13.1328 8.75523 0.0 0.0
24.0 1.0 1240.33 826.886 13.1328 8.75523 0.0 0.0

These actions are transferred from the following analysis run:

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 54
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Location: Span 3
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Linebeam with Temperature or Shrinkage
- ULS factor: 1.5 SLS factor: 1.0

Differential tem perature secondary loads - cooling


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 -327.81 -218.54 4.60499 3.06999 0.0 0.0
1.2 0.05 -333.33 -222.22 4.60499 3.06999 0.0 0.0
2.4 0.1 -338.86 -225.91 4.60419 3.06946 0.0 0.0
3.6 0.15 -344.38 -229.59 4.60358 3.06905 0.0 0.0
4.8 0.2 -349.91 -233.27 4.60327 3.06885 0.0 0.0
6.0 0.25 -355.43 -236.95 4.60846 3.07231 0.0 0.0
7.2 0.3 -360.97 -240.65 4.60693 3.07129 0.0 0.0
8.4 0.35 -366.49 -244.32 4.59778 3.06519 0.0 0.0
9.6 0.4 -372.0 -248.0 4.59991 3.06661 0.0 0.0
10.8 0.45 -377.53 -251.68 4.60724 3.07149 0.0 0.0
12.0 0.5 -383.06 -255.37 4.60663 3.07109 0.0 0.0
13.2 0.55 -388.58 -259.05 4.60541 3.07027 0.0 0.0
14.4 0.6 -394.11 -262.74 4.60602 3.07068 0.0 0.0
15.6 0.65 -399.64 -266.42 4.60983 3.07322 0.0 0.0
16.8 0.7 -405.18 -270.12 4.61273 3.07515 0.0 0.0
18.0 0.75 -410.71 -273.8 4.60274 3.06849 0.0 0.0
19.2 0.8 -416.22 -277.48 4.6027 3.06847 0.0 0.0
20.4 0.85 -421.75 -281.17 4.60491 3.06994 0.0 0.0
21.6 0.9 -427.27 -284.85 4.60181 3.06787 0.0 0.0
22.8 0.95 -432.8 -288.53 4.60317 3.06878 0.0 0.0
24.0 1.0 -438.32 -292.21 4.60317 3.06878 0.0 0.0

These actions are transferred from the following analysis run:

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 55
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Location: Span 3
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Linebeam with Temperature or Shrinkage
- ULS factor: 1.5 SLS factor: 1.0

Shrinkage and creep secondary effects


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 -137.8 -102.08 2.62239 1.94251 0.0 0.0
1.2 0.05 -140.95 -104.41 2.62239 1.94251 0.0 0.0
2.4 0.1 -144.1 -106.74 2.6222 1.94237 0.0 0.0
3.6 0.15 -147.24 -109.07 2.62286 1.94286 0.0 0.0
4.8 0.2 -150.39 -111.4 2.62444 1.94403 0.0 0.0
6.0 0.25 -153.54 -113.73 2.62642 1.9455 0.0 0.0
7.2 0.3 -156.69 -116.07 2.62106 1.94153 0.0 0.0
8.4 0.35 -159.83 -118.39 2.62367 1.94346 0.0 0.0
9.6 0.4 -162.99 -120.73 2.62697 1.9459 0.0 0.0
10.8 0.45 -166.14 -123.06 2.6153 1.93726 0.0 0.0
12.0 0.5 -169.27 -125.38 2.6098 1.93319 0.0 0.0
13.2 0.55 -172.4 -127.7 2.62285 1.94285 0.0 0.0
14.4 0.6 -175.56 -130.05 2.61736 1.93878 0.0 0.0
15.6 0.65 -178.68 -132.36 2.6074 1.93141 0.0 0.0
16.8 0.7 -181.82 -134.68 2.6144 1.93659 0.0 0.0
18.0 0.75 -184.96 -137.0 2.61264 1.93529 0.0 0.0
19.2 0.8 -188.09 -139.33 2.61398 1.93628 0.0 0.0
20.4 0.85 -191.23 -141.65 2.61636 1.93804 0.0 0.0
21.6 0.9 -194.37 -143.98 2.61637 1.93805 0.0 0.0
22.8 0.95 -197.51 -146.3 2.61632 1.93801 0.0 0.0
24.0 1.0 -200.65 -148.63 2.61632 1.93801 0.0 0.0

These actions are transferred from the following analysis run:

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 56
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Location: Span 3
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Linebeam with Temperature or Shrinkage
- ULS factor: 1.35 SLS factor: 1.0

Settlem ent of supports


- none defined -

Beam Erection
Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 0.0 0.0 320.326 237.279 0.0 0.0
1.2 0.05 365.178 270.502 288.274 213.537 0.0 0.0
2.4 0.1 691.92 512.533 256.233 189.802 0.0 0.0
3.6 0.15 980.187 726.065 224.213 166.083 0.0 0.0
4.8 0.2 1230.0 911.111 192.108 142.302 0.0 0.0
6.0 0.25 1441.38 1067.69 160.088 118.583 0.0 0.0
7.2 0.3 1614.22 1195.72 127.983 94.8022 0.0 0.0
8.4 0.35 1748.51 1295.19 95.9204 71.0521 0.0 0.0
9.6 0.4 1844.36 1366.19 63.7736 47.2397 0.0 0.0
10.8 0.45 1901.65 1408.63 31.9641 23.6771 0.0 0.0
12.0 0.5 1920.76 1422.78 0.07053 0.05225 0.0 0.0
13.2 0.55 1901.56 1408.56 31.9077 23.6353 0.0 0.0
14.4 0.6 1844.1 1366.0 64.1389 47.5103 0.0 0.0
15.6 0.65 1747.87 1294.72 95.9906 71.1041 0.0 0.0
16.8 0.7 1613.42 1195.13 128.053 94.8541 0.0 0.0
18.0 0.75 1440.62 1067.13 159.989 118.51 0.0 0.0
19.2 0.8 1229.35 910.627 191.967 142.198 0.0 0.0
20.4 0.85 979.702 725.705 224.072 165.979 0.0 0.0
21.6 0.9 691.604 512.299 256.113 189.713 0.0 0.0
22.8 0.95 365.041 270.401 288.184 213.47 0.0 0.0
24.0 1.0 0.0 0.0 320.219 237.199 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 57
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

These actions are transferred from the following analysis run:

Location: Span 3
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Linebeam with Erection of beam
- ULS factor: 1.35 SLS factor: 1.0

Construction stage 1A
Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 0.0 0.0 110.552 81.8906 0.0 0.0
1.2 0.05 132.664 98.2695 110.552 81.8906 0.0 0.0
2.4 0.1 265.338 196.547 110.531 81.875 0.0 0.0
3.6 0.15 398.01 294.822 110.519 81.8656 0.0 0.0
4.8 0.2 521.197 386.072 94.6982 70.1468 0.0 0.0
6.0 0.25 625.411 463.267 78.9202 58.4594 0.0 0.0
7.2 0.3 710.651 526.408 63.0577 46.7094 0.0 0.0
8.4 0.35 776.843 575.439 47.3006 35.0375 0.0 0.0
9.6 0.4 824.135 610.471 31.4592 23.3031 0.0 0.0
10.8 0.45 852.422 631.424 15.7021 11.6312 0.0 0.0
12.0 0.5 861.893 638.439 0.05479 0.04058 0.0 0.0
13.2 0.55 852.359 631.377 15.7275 11.65 0.0 0.0
14.4 0.6 824.093 610.439 31.6743 23.4625 0.0 0.0
15.6 0.65 776.527 575.205 47.2838 35.025 0.0 0.0
16.8 0.7 710.24 526.103 63.1252 46.7594 0.0 0.0
18.0 0.75 625.063 463.01 78.8822 58.4313 0.0 0.0
19.2 0.8 520.902 385.853 94.7025 70.15 0.0 0.0
20.4 0.85 397.828 294.688 110.531 81.875 0.0 0.0
21.6 0.9 265.217 196.457 110.521 81.8672 0.0 0.0
22.8 0.95 132.609 98.2289 110.509 81.8584 0.0 0.0
24.0 1.0 0.0 0.0 110.509 81.8584 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 58
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

These actions are transferred from the following analysis run:

Location: Span 3
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Linebeam with Construction stage 1A
- ULS factor: 1.35 SLS factor: 1.0

Construction stage 1B
Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 -73.967 -54.79 47.5307 35.2079 0.0 0.0
1.2 0.05 -26.407 -19.561 31.7356 23.5078 0.0 0.0
2.4 0.1 2.19942 1.6292 15.9407 11.8079 0.0 0.0
3.6 0.15 11.8516 8.77899 0.14666 0.10864 0.0 0.0
4.8 0.2 12.0245 8.90704 0.15243 0.11291 0.0 0.0
6.0 0.25 12.2018 9.03839 0.14864 0.11010 0.0 0.0
7.2 0.3 12.3761 9.16748 0.14897 0.11035 0.0 0.0
8.4 0.35 12.5544 9.29956 0.14617 0.10827 0.0 0.0
9.6 0.4 12.7313 9.4306 0.14419 0.10681 0.0 0.0
10.8 0.45 12.9068 9.56061 0.14436 0.10693 0.0 0.0
12.0 0.5 13.0827 9.69086 0.14386 0.10656 0.0 0.0
13.2 0.55 13.259 9.82147 0.14485 0.1073 0.0 0.0
14.4 0.6 13.4323 9.94983 0.14856 0.11004 0.0 0.0
15.6 0.65 13.611 10.0822 0.14790 0.10955 0.0 0.0
16.8 0.7 13.7883 10.2136 0.14922 0.11053 0.0 0.0
18.0 0.75 13.9697 10.3479 0.14625 0.10833 0.0 0.0
19.2 0.8 14.1426 10.476 0.14773 0.10943 0.0 0.0
20.4 0.85 14.3195 10.607 0.14684 0.10877 0.0 0.0
21.6 0.9 5.01855 3.71744 15.6485 11.5915 0.0 0.0
22.8 0.95 -23.237 -17.213 31.4431 23.2912 0.0 0.0
24.0 1.0 -70.446 -52.182 47.2381 34.9912 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 59
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

These actions are transferred from the following analysis run:

Location: Span 3
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Linebeam with Construction stage 1B
- ULS factor: 1.35 SLS factor: 1.0

Construction stage 2
- none defined -

Construction stage 3
- none defined -

Surfacing 1
Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 -169.11 -140.93 50.223 41.8525 0.0 0.0
1.2 0.05 -112.01 -93.339 44.9529 37.4608 0.0 0.0
2.4 0.1 -61.225 -51.021 39.6802 33.0668 0.0 0.0
3.6 0.15 -16.772 -13.977 34.4129 28.6774 0.0 0.0
4.8 0.2 21.3648 17.804 29.1395 24.2829 0.0 0.0
6.0 0.25 53.1659 44.3049 23.8714 19.8928 0.0 0.0
7.2 0.3 78.6425 65.5354 18.6137 15.5114 0.0 0.0
8.4 0.35 97.8243 81.5203 13.3139 11.0949 0.0 0.0
9.6 0.4 110.641 92.2012 8.05512 6.7126 0.0 0.0
10.8 0.45 117.143 97.6189 2.80804 2.34003 0.0 0.0
12.0 0.5 117.343 97.7861 2.48705 2.07254 0.0 0.0
13.2 0.55 111.209 92.6738 7.74995 6.4583 0.0 0.0
14.4 0.6 98.7521 82.2935 13.0205 10.8504 0.0 0.0
15.6 0.65 79.9647 66.6372 18.274 15.2283 0.0 0.0
16.8 0.7 54.8621 45.7184 23.5471 19.6226 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 60
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

18.0 0.75 23.4368 19.5306 28.8168 24.014 0.0 0.0


19.2 0.8 -14.313 -11.927 34.1006 28.4172 0.0 0.0
20.4 0.85 -58.397 -48.664 39.3696 32.808 0.0 0.0
21.6 0.9 -108.81 -90.671 44.6396 37.1997 0.0 0.0
22.8 0.95 -165.53 -137.95 49.9111 41.5925 0.0 0.0
24.0 1.0 -228.59 -190.49 55.1815 45.9846 0.0 0.0

These actions are transferred from the following analysis run:

Location: Span 3
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Linebeam with Superimposed dead load
- ULS factor: 1.2 SLS factor: 1.0

Traffic gr1a TS - for Bending design 1 : [Max +ve]


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 348.847 258.405 80.8663 59.901 0.0 0.0
1.2 0.05 326.385 241.767 17.5166 12.9752 0.0 0.0
2.4 0.1 827.41 612.896 342.232 253.505 0.0 0.0
3.6 0.15 1364.88 1011.02 538.932 399.209 0.0 0.0
4.8 0.2 1865.93 1382.17 263.548 195.221 0.0 0.0
6.0 0.25 2283.13 1691.21 229.182 169.765 0.0 0.0
7.2 0.3 2683.96 1988.12 562.659 416.785 0.0 0.0
8.4 0.35 2961.97 2194.05 184.969 137.014 0.0 0.0
9.6 0.4 3158.9 2339.93 192.776 142.797 0.0 0.0
10.8 0.45 3310.19 2451.99 200.418 148.458 0.0 0.0
12.0 0.5 3349.16 2480.86 57.5525 42.6315 0.0 0.0
13.2 0.55 3324.44 2462.55 50.5168 37.4198 0.0 0.0
14.4 0.6 3227.73 2390.91 69.531 51.5045 0.0 0.0
15.6 0.65 2976.51 2204.82 234.157 173.45 0.0 0.0
16.8 0.7 2704.09 2003.03 225.762 167.231 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 61
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

18.0 0.75 2386.39 1767.69 604.956 448.115 0.0 0.0


19.2 0.8 1885.14 1396.4 404.217 299.42 0.0 0.0
20.4 0.85 1399.72 1036.83 392.571 290.793 0.0 0.0
21.6 0.9 878.927 651.057 723.945 536.255 0.0 0.0
22.8 0.95 306.599 227.11 375.646 278.256 0.0 0.0
24.0 1.0 288.599 213.777 69.4151 51.4186 0.0 0.0

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 3
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum -ve Moments
- ULS factor: 1.35 SLS factor: 1.0

Traffic gr1a UDL - for Bending design 1 : [Max +ve]


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 498.246 369.071 232.142 171.957 0.0 0.0
1.2 0.05 444.874 329.536 62.7129 46.454 0.0 0.0
2.4 0.1 487.432 361.061 95.0495 70.407 0.0 0.0
3.6 0.15 654.874 485.092 196.914 145.862 0.0 0.0
4.8 0.2 927.256 686.856 242.434 179.581 0.0 0.0
6.0 0.25 1202.22 890.531 209.9 155.481 0.0 0.0
7.2 0.3 1428.08 1057.84 177.507 131.487 0.0 0.0
8.4 0.35 1598.21 1183.86 112.363 83.2321 0.0 0.0
9.6 0.4 1715.93 1271.06 80.0127 59.2686 0.0 0.0
10.8 0.45 1784.9 1322.15 47.4819 35.1718 0.0 0.0
12.0 0.5 1796.78 1330.95 132.702 98.2978 0.0 0.0
13.2 0.55 1757.69 1301.99 151.126 111.945 0.0 0.0
14.4 0.6 1669.43 1236.61 221.526 164.093 0.0 0.0
15.6 0.65 1523.39 1128.44 615.832 456.172 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 62
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

16.8 0.7 1327.26 983.154 631.457 467.746 0.0 0.0


18.0 0.75 1082.02 801.5 1454.96 1077.75 0.0 0.0
19.2 0.8 777.764 576.122 1086.05 804.48 0.0 0.0
20.4 0.85 465.52 344.83 998.498 739.628 0.0 0.0
21.6 0.9 259.551 192.26 1590.84 1178.4 0.0 0.0
22.8 0.95 174.499 129.258 773.678 573.095 0.0 0.0
24.0 1.0 198.449 146.999 47.7319 35.3569 0.0 0.0

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 3
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum -ve Moments
- ULS factor: 1.35 SLS factor: 1.0

Traffic gr1b-gr5 - for Bending design 1 : [Max +ve]


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 234.009 173.34 54.246 40.1822 0.0 0.0
1.2 0.05 289.306 214.301 14.7539 10.9288 0.0 0.0
2.4 0.1 597.481 442.578 489.483 362.58 0.0 0.0
3.6 0.15 1015.18 751.984 442.898 328.072 0.0 0.0
4.8 0.2 1303.91 965.86 77.173 57.1652 0.0 0.0
6.0 0.25 1604.32 1188.39 392.789 290.955 0.0 0.0
7.2 0.3 1902.98 1409.61 389.626 288.612 0.0 0.0
8.4 0.35 2052.58 1520.43 88.5595 65.5996 0.0 0.0
9.6 0.4 2180.68 1615.32 224.059 165.97 0.0 0.0
10.8 0.45 2333.37 1728.42 252.358 186.932 0.0 0.0
12.0 0.5 2335.36 1729.9 259.665 192.345 0.0 0.0
13.2 0.55 2266.24 1678.69 52.1065 38.5974 0.0 0.0
14.4 0.6 2235.4 1655.85 80.3084 59.4877 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 63
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

15.6 0.65 2061.86 1527.3 349.534 258.914 0.0 0.0


16.8 0.7 1846.75 1367.97 118.354 87.67 0.0 0.0
18.0 0.75 1663.24 1232.03 344.332 255.061 0.0 0.0
19.2 0.8 1322.76 979.82 314.065 232.641 0.0 0.0
20.4 0.85 981.899 727.333 2.88061 2.13379 0.0 0.0
21.6 0.9 705.667 522.717 497.91 368.822 0.0 0.0
22.8 0.95 274.973 203.684 469.358 347.672 0.0 0.0
24.0 1.0 193.0 142.963 46.4215 34.3863 0.0 0.0

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 3
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum -ve Moments
- ULS factor: 1.35 SLS factor: 1.0

Traffic gr1a TS - for Bending design 2 : [Max -ve]


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 -1378.8 -1021.3 525.453 389.224 0.0 0.0
1.2 0.05 -1294.2 -958.66 69.4548 51.448 0.0 0.0
2.4 0.1 -1210.8 -896.92 69.4534 51.447 0.0 0.0
3.6 0.15 -1127.5 -835.17 69.4463 51.4417 0.0 0.0
4.8 0.2 -1044.2 -773.45 69.4333 51.432 0.0 0.0
6.0 0.25 -960.82 -711.72 69.4561 51.449 0.0 0.0
7.2 0.3 -877.44 -649.96 69.4153 51.4187 0.0 0.0
8.4 0.35 -794.21 -588.31 69.4863 51.4713 0.0 0.0
9.6 0.4 -710.82 -526.53 69.4211 51.4231 0.0 0.0
10.8 0.45 -627.52 -464.83 69.4432 51.4394 0.0 0.0
12.0 0.5 -621.68 -460.5 80.8404 59.8818 0.0 0.0
13.2 0.55 -718.76 -532.41 80.9144 59.9366 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 64
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

14.4 0.6 -815.78 -604.28 80.9447 59.959 0.0 0.0


15.6 0.65 -913.04 -676.32 80.9442 59.9587 0.0 0.0
16.8 0.7 -1010.2 -748.28 80.9959 59.9969 0.0 0.0
18.0 0.75 -1107.4 -820.28 80.9428 59.9576 0.0 0.0
19.2 0.8 -1204.5 -892.21 80.8462 59.8861 0.0 0.0
20.4 0.85 -1301.5 -964.06 80.8538 59.8917 0.0 0.0
21.6 0.9 -1398.5 -1035.9 80.8737 59.9065 0.0 0.0
22.8 0.95 -1495.5 -1107.8 80.8652 59.9002 0.0 0.0
24.0 1.0 -1592.6 -1179.7 80.8652 59.9002 0.0 0.0

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 3
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum +ve Moments
- ULS factor: 1.35 SLS factor: 1.0

Traffic gr1a UDL - for Bending design 2 : [Max -ve]


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 -1897.3 -1405.4 496.636 367.879 0.0 0.0
1.2 0.05 -1371.1 -1015.6 379.326 280.982 0.0 0.0
2.4 0.1 -993.56 -735.97 247.209 183.118 0.0 0.0
3.6 0.15 -789.68 -584.95 97.856 72.486 0.0 0.0
4.8 0.2 -746.14 -552.7 10.13 7.50368 0.0 0.0
6.0 0.25 -758.28 -561.69 10.1082 7.48758 0.0 0.0
7.2 0.3 -770.38 -570.65 10.1659 7.53032 0.0 0.0
8.4 0.35 -782.64 -579.74 10.1021 7.48304 0.0 0.0
9.6 0.4 -794.72 -588.68 10.17 7.53335 0.0 0.0
10.8 0.45 -806.93 -597.72 10.1373 7.50913 0.0 0.0
12.0 0.5 -819.15 -606.78 171.787 127.249 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 65
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

13.2 0.55 -831.37 -615.83 171.978 127.391 0.0 0.0


14.4 0.6 -843.5 -624.81 172.132 127.505 0.0 0.0
15.6 0.65 -855.89 -633.99 172.097 127.48 0.0 0.0
16.8 0.7 -868.16 -643.08 172.253 127.595 0.0 0.0
18.0 0.75 -880.51 -652.23 172.073 127.462 0.0 0.0
19.2 0.8 -892.71 -661.27 171.84 127.289 0.0 0.0
20.4 0.85 -945.93 -700.69 265.232 196.468 0.0 0.0
21.6 0.9 -1156.0 -856.32 415.97 308.126 0.0 0.0
22.8 0.95 -1544.5 -1144.1 568.128 420.835 0.0 0.0
24.0 1.0 -2090.4 -1548.4 658.362 487.676 0.0 0.0

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 3
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum +ve Moments
- ULS factor: 1.35 SLS factor: 1.0

Traffic gr1b-gr5 - for Bending design 2 : [Max -ve]


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 -921.35 -682.48 353.124 261.574 0.0 0.0
1.2 0.05 -865.49 -641.1 46.4473 34.4054 0.0 0.0
2.4 0.1 -809.75 -599.81 46.4445 34.4033 0.0 0.0
3.6 0.15 -754.0 -558.52 46.4471 34.4053 0.0 0.0
4.8 0.2 -698.29 -517.25 46.4414 34.4011 0.0 0.0
6.0 0.25 -642.54 -475.96 46.4367 34.3976 0.0 0.0
7.2 0.3 -586.79 -434.66 46.4198 34.385 0.0 0.0
8.4 0.35 -531.13 -393.43 46.4692 34.4216 0.0 0.0
9.6 0.4 -475.37 -352.12 46.4306 34.393 0.0 0.0
10.8 0.45 -419.65 -310.85 46.447 34.4052 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 66
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

12.0 0.5 -417.03 -308.91 54.2247 40.1664 0.0 0.0


13.2 0.55 -482.14 -357.14 54.2948 40.2184 0.0 0.0
14.4 0.6 -547.24 -405.36 54.2911 40.2156 0.0 0.0
15.6 0.65 -612.48 -453.69 54.2914 40.2159 0.0 0.0
16.8 0.7 -677.64 -501.95 54.3311 40.2453 0.0 0.0
18.0 0.75 -742.83 -550.25 54.3047 40.2257 0.0 0.0
19.2 0.8 -807.98 -598.51 54.2249 40.1666 0.0 0.0
20.4 0.85 -873.04 -646.7 54.2363 40.175 0.0 0.0
21.6 0.9 -938.12 -694.9 54.2488 40.1843 0.0 0.0
22.8 0.95 -1003.2 -743.12 54.2452 40.1816 0.0 0.0
24.0 1.0 -1068.3 -791.34 54.2452 40.1816 0.0 0.0

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 3
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum +ve Moments
- ULS factor: 1.35 SLS factor: 1.0

Traffic gr1a TS - for Shear design 1


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 -338.14 -250.47 786.609 582.673 0.0 0.0
1.2 0.05 17.6845 13.0996 732.566 542.642 0.0 0.0
2.4 0.1 765.451 567.001 717.417 531.42 0.0 0.0
3.6 0.15 1361.44 1008.47 685.296 507.626 0.0 0.0
4.8 0.2 1547.75 1146.48 598.832 443.579 0.0 0.0
6.0 0.25 2135.53 1581.87 580.764 430.195 0.0 0.0
7.2 0.3 2683.96 1988.12 562.659 416.785 0.0 0.0
8.4 0.35 2728.21 2020.9 487.802 361.335 0.0 0.0
9.6 0.4 3059.82 2266.54 459.487 340.361 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 67
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

10.8 0.45 3153.66 2336.04 411.844 305.07 0.0 0.0


12.0 0.5 3269.34 2421.74 366.75 271.667 0.0 0.0
13.2 0.55 3090.59 2289.32 398.317 295.049 0.0 0.0
14.4 0.6 2929.98 2170.35 436.34 323.215 0.0 0.0
15.6 0.65 2844.25 2106.85 493.655 365.67 0.0 0.0
16.8 0.7 2520.55 1867.08 531.233 393.506 0.0 0.0
18.0 0.75 2386.39 1767.69 604.956 448.115 0.0 0.0
19.2 0.8 1778.91 1317.71 622.861 461.379 0.0 0.0
20.4 0.85 1242.29 920.218 657.875 487.315 0.0 0.0
21.6 0.9 878.927 651.057 723.945 536.255 0.0 0.0
22.8 0.95 251.782 186.505 753.81 558.378 0.0 0.0
24.0 1.0 -652.79 -483.55 753.81 558.378 0.0 0.0

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 3
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum Shears
- ULS factor: 1.35 SLS factor: 1.0

Traffic gr1a UDL - for Shear design 1


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 -1897.3 -1405.4 496.636 367.879 0.0 0.0
1.2 0.05 -1353.2 -1002.4 433.495 321.107 0.0 0.0
2.4 0.1 -877.88 -650.28 402.704 298.299 0.0 0.0
3.6 0.15 -461.73 -342.02 372.778 276.132 0.0 0.0
4.8 0.2 -171.61 -127.12 315.363 233.602 0.0 0.0
6.0 0.25 98.8168 73.1976 289.353 214.336 0.0 0.0
7.2 0.3 287.921 213.275 266.622 197.497 0.0 0.0
8.4 0.35 348.487 258.138 219.959 162.933 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 68
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

9.6 0.4 480.628 356.021 197.999 146.666 0.0 0.0


10.8 0.45 593.95 439.963 175.338 129.88 0.0 0.0
12.0 0.5 576.704 427.188 168.556 124.856 0.0 0.0
13.2 0.55 517.505 383.337 184.79 136.881 0.0 0.0
14.4 0.6 376.061 278.564 207.403 153.632 0.0 0.0
15.6 0.65 332.664 246.418 248.169 183.829 0.0 0.0
16.8 0.7 155.374 115.092 272.811 202.082 0.0 0.0
18.0 0.75 63.4773 47.0202 319.227 236.465 0.0 0.0
19.2 0.8 -255.68 -189.4 346.88 256.948 0.0 0.0
20.4 0.85 -625.72 -463.49 375.309 278.007 0.0 0.0
21.6 0.9 -1007.8 -746.55 434.599 321.925 0.0 0.0
22.8 0.95 -1516.4 -1123.3 465.798 345.036 0.0 0.0
24.0 1.0 -2078.1 -1539.3 496.632 367.875 0.0 0.0

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 3
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum Shears
- ULS factor: 1.35 SLS factor: 1.0

Traffic gr1b-gr5 - for Shear design 1


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 -235.37 -174.35 525.214 389.048 0.0 0.0
1.2 0.05 183.096 135.627 508.306 376.523 0.0 0.0
2.4 0.1 597.481 442.578 489.483 362.58 0.0 0.0
3.6 0.15 996.252 737.964 469.054 347.448 0.0 0.0
4.8 0.2 1200.23 889.06 424.596 314.516 0.0 0.0
6.0 0.25 1524.27 1129.09 401.389 297.325 0.0 0.0
7.2 0.3 1902.98 1409.61 389.626 288.612 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 69
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

8.4 0.35 1941.99 1438.51 340.784 252.433 0.0 0.0


9.6 0.4 2122.7 1572.37 315.939 234.029 0.0 0.0
10.8 0.45 2314.89 1714.73 297.239 220.177 0.0 0.0
12.0 0.5 2335.36 1729.9 259.665 192.345 0.0 0.0
13.2 0.55 2200.93 1630.32 280.705 207.929 0.0 0.0
14.4 0.6 2078.64 1539.74 305.668 226.421 0.0 0.0
15.6 0.65 2061.86 1527.3 349.534 258.914 0.0 0.0
16.8 0.7 1829.21 1354.97 373.988 277.028 0.0 0.0
18.0 0.75 1639.64 1214.55 410.04 303.733 0.0 0.0
19.2 0.8 1310.6 970.813 433.31 320.97 0.0 0.0
20.4 0.85 942.488 698.139 455.788 337.621 0.0 0.0
21.6 0.9 705.667 522.717 497.91 368.822 0.0 0.0
22.8 0.95 108.173 80.1281 497.904 368.818 0.0 0.0
24.0 1.0 -318.76 -236.12 515.962 382.194 0.0 0.0

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 3
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum Shears
- ULS factor: 1.35 SLS factor: 1.0

--------------------------------------------------------------------------------

ANALYSIS DATA

Data for loss calculations

Shrinkage strain is calculated from the data provided.


Creep coefficient is calculated from the data provided.
Differential shrinkage is calculated from the data provided.
Percentage of total long term loss which occurs before the section is
made composite is 30.0 %
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 70
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Age at start of drying shrinkage = 1.0 day


Ambient relative humidity = 80.0 %
Ambient temperature = 20.0 °C
Maximum Curing temperature = 20.0 °C

Creep calculations are based upon EN 1992-1-1

Data for shear calculations

Material property for transverse reinforcement: MP3: Grade 500 Es 200.0


Angle between concrete strut and beam axis, θ = 21.8014°
Angle between shear reinforcement and beam axis, α = 90.0°
Enhancement close to supports is included
Dimension from left support c/l to face of support = 0.0 m
Dimension from right support c/l to face of support = 0.0 m
Surface condition for precast / in-situ interface = Smooth
Longitudinal force ratio β is calculated
Angle for compression strut in slab, θf = 38.6598°

DESIGN BEAM - SB4: SPAN 4


--------------------------------------------------------------------------------

BEAM DEFINITION

EN 1992-2 Pre-tensioned Prestressed Beam


With recom m ended NDP values

Total length of pre-tensioned beam : 24 m


Distance from left support to beam end face : 0 m
Distance from right support to beam end face : 0 m
Total distance between supports : 24 m

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 71
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Beam section varies along length of beam.

Number of different sections : 2


No. of longitudinal construction stages : 2
No. of superimposed construction stages : 1

Section 1

Precast beam:
Precast beam is standard section: U12 Beam
Property set: MP2: C40/50 Ecm 35.2
Age of beam at transfer: 4.0 days
Corresponding concrete strength at transfer: 23.8094 MPa

In situ concrete - stage 1A:


In situ is from non-standard section: Rectangle
Property set: MP2: C40/50 Ecm 35.2
Age of beam when stage 1A concrete is cast: 14 days

Shear resistance width: 326.0 mm

Section 2

Precast beam:
Precast beam is standard section: U12 Beam
Property set: MP2: C40/50 Ecm 35.2
Age of beam at transfer: 4.0 days
Corresponding concrete strength at transfer: 23.8094 MPa

In situ concrete - stage 1B:


In situ is from non-standard section: Rectangle
Property set: MP2: C40/50 Ecm 35.2
Age of beam when stage 1B concrete is cast: 30 days

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 72
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Shear resistance width: 326.0 mm

Tendons
—————————————————————————————————————————————————————————————————————————————
y-z coordinates area transmission coeffients φ draw-in property type
mm mm² α 1 α2 η p1 η1 η p2 mm mm/beam ref
—————————————————————————————————————————————————————————————————————————————
-380.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-340.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-300.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-250.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-200.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-150.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-100.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-50.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
-6.E-14 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
50.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
100.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
150.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
200.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
250.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
300.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
340.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
380.0 60.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-100.0 110.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
-50.0 110.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
-6.E-14 110.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
50.0 110.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Debonded
100.0 110.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-300.0 160.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
300.0 160.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 73
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

-350.0 210.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
350.0 210.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-606.0 1500.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
-471.0 1500.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
471.0 1500.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress
606.0 1500.0 150.0 1.0 0.19 3.2 1.0 1.2 16.0 1.44 MP1 Full stress

Debonded Tendons
———————————————————————————————————————————————————
y-z coordinates distance from left end (m)
mm start end
———————————————————————————————————————————————————
-50.0 60.0 2.5 21.5
-6.E-14 60.0 3.0 21.0
50.0 60.0 3.0 21.0
100.0 60.0 2.5 21.5
-100.0 110.0 4.0 20.0
-50.0 110.0 3.5 20.5
-6.E-14 110.0 4.0 20.0
50.0 110.0 3.5 20.5

Reinforcem ent
————————————————————————————————————————————————————————————————————
y-z coordinates diameter Property Start End Length
mm mm ref m m m
————————————————————————————————————————————————————————————————————
900.0 1734.0 20.0 MP3 20.4 24.0 3.6
700.0 1734.0 20.0 MP3 20.4 24.0 3.6
500.0 1734.0 20.0 MP3 20.4 24.0 3.6
300.0 1734.0 20.0 MP3 20.4 24.0 3.6
100.0 1734.0 20.0 MP3 20.4 24.0 3.6

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 74
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

-100.0 1734.0 20.0 MP3 20.4 24.0 3.6


-300.0 1734.0 20.0 MP3 20.4 24.0 3.6
-500.0 1734.0 20.0 MP3 20.4 24.0 3.6
-700.0 1734.0 20.0 MP3 20.4 24.0 3.6
-900.0 1734.0 20.0 MP3 20.4 24.0 3.6
900.0 1734.0 32.0 MP3 0.0 3.6 3.6
700.0 1734.0 32.0 MP3 0.0 3.6 3.6
500.0 1734.0 32.0 MP3 0.0 3.6 3.6
300.0 1734.0 32.0 MP3 0.0 3.6 3.6
100.0 1734.0 32.0 MP3 0.0 3.6 3.6
-100.0 1734.0 32.0 MP3 0.0 3.6 3.6
-300.0 1734.0 32.0 MP3 0.0 3.6 3.6
-500.0 1734.0 32.0 MP3 0.0 3.6 3.6
-700.0 1734.0 32.0 MP3 0.0 3.6 3.6
-900.0 1734.0 32.0 MP3 0.0 3.6 3.6

Location of sections

Position along span


from left support: Section
dimension (m) proportion
0.0 0.0 2 Section 2
3.5999999 0.15 2 Section 2
3.5999999 0.15 1 Section 1
24.0 1.0 1 Section 1

--------------------------------------------------------------------------------
PRE-TENSIONED BEAM LOADING DATA

Differential tem perature secondary loads - heating


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 75
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

(from left support) kN.m kN kN


dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 1240.33 826.888 51.7308 34.4872 0.0 0.0
1.2 0.05 1178.25 785.502 51.7308 34.4872 0.0 0.0
2.4 0.1 1116.18 744.118 51.7374 34.4916 0.0 0.0
3.6 0.15 1054.08 702.722 51.7357 34.4905 0.0 0.0
4.8 0.2 992.012 661.341 51.7348 34.4898 0.0 0.0
6.0 0.25 929.92 619.947 51.7595 34.5063 0.0 0.0
7.2 0.3 867.789 578.526 51.7905 34.527 0.0 0.0
8.4 0.35 805.623 537.082 51.7709 34.514 0.0 0.0
9.6 0.4 743.539 495.693 51.7622 34.5082 0.0 0.0
10.8 0.45 681.394 454.262 51.7117 34.4745 0.0 0.0
12.0 0.5 619.431 412.954 51.6544 34.4362 0.0 0.0
13.2 0.55 557.423 371.615 51.6089 34.4059 0.0 0.0
14.4 0.6 495.569 330.38 51.6084 34.4056 0.0 0.0
15.6 0.65 433.563 289.042 51.6409 34.4273 0.0 0.0
16.8 0.7 371.631 247.754 51.5992 34.3995 0.0 0.0
18.0 0.75 309.725 206.483 51.6082 34.4055 0.0 0.0
19.2 0.8 247.772 165.181 51.6251 34.4168 0.0 0.0
20.4 0.85 185.825 123.883 51.6177 34.4118 0.0 0.0
21.6 0.9 123.889 82.5926 51.6198 34.4132 0.0 0.0
22.8 0.95 61.9371 41.2914 51.6187 34.4124 0.0 0.0
24.0 1.0 0.0 0.0 51.6187 34.4124 0.0 0.0

These actions are transferred from the following analysis run:

Location: Span 4
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Linebeam with Temperature or Shrinkage
- ULS factor: 1.5 SLS factor: 1.0

Differential tem perature secondary loads - cooling


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 76
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

(from left support) kN.m kN kN


dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 -438.32 -292.22 18.281 12.1873 0.0 0.0
1.2 0.05 -416.39 -277.59 18.281 12.1873 0.0 0.0
2.4 0.1 -394.45 -262.97 18.2821 12.188 0.0 0.0
3.6 0.15 -372.51 -248.34 18.2825 12.1883 0.0 0.0
4.8 0.2 -350.57 -233.71 18.286 12.1907 0.0 0.0
6.0 0.25 -328.62 -219.08 18.2877 12.1918 0.0 0.0
7.2 0.3 -306.68 -204.45 18.3 12.2 0.0 0.0
8.4 0.35 -284.7 -189.8 18.3068 12.2045 0.0 0.0
9.6 0.4 -262.74 -175.16 18.2904 12.1936 0.0 0.0
10.8 0.45 -240.81 -160.54 18.2627 12.1751 0.0 0.0
12.0 0.5 -218.91 -145.94 18.2569 12.1713 0.0 0.0
13.2 0.55 -196.99 -131.33 18.2449 12.1633 0.0 0.0
14.4 0.6 -175.13 -116.75 18.2366 12.1577 0.0 0.0
15.6 0.65 -153.22 -102.15 18.2491 12.1661 0.0 0.0
16.8 0.7 -131.33 -87.552 18.2383 12.1589 0.0 0.0
18.0 0.75 -109.45 -72.967 18.2325 12.155 0.0 0.0
19.2 0.8 -87.57 -58.38 18.2422 12.1614 0.0 0.0
20.4 0.85 -65.669 -43.779 18.246 12.164 0.0 0.0
21.6 0.9 -43.78 -29.187 18.2419 12.1613 0.0 0.0
22.8 0.95 -21.888 -14.592 18.2413 12.1609 0.0 0.0
24.0 1.0 0.0 0.0 18.2413 12.1609 0.0 0.0

These actions are transferred from the following analysis run:

Location: Span 4
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Linebeam with Temperature or Shrinkage
- ULS factor: 1.5 SLS factor: 1.0

Shrinkage and creep secondary effects


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 77
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

(from left support) kN.m kN kN


dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 -200.65 -148.63 8.38572 6.21165 0.0 0.0
1.2 0.05 -190.59 -141.18 8.38572 6.21165 0.0 0.0
2.4 0.1 -180.52 -133.72 8.38455 6.21078 0.0 0.0
3.6 0.15 -170.46 -126.27 8.38068 6.20791 0.0 0.0
4.8 0.2 -160.41 -118.82 8.38829 6.21355 0.0 0.0
6.0 0.25 -150.33 -111.36 8.40018 6.22236 0.0 0.0
7.2 0.3 -140.25 -103.89 8.41336 6.23212 0.0 0.0
8.4 0.35 -130.14 -96.4 8.40334 6.2247 0.0 0.0
9.6 0.4 -120.08 -88.949 8.40598 6.22665 0.0 0.0
10.8 0.45 -109.97 -81.456 8.38415 6.21048 0.0 0.0
12.0 0.5 -99.959 -74.044 8.34621 6.18238 0.0 0.0
13.2 0.55 -89.935 -66.618 8.33021 6.17053 0.0 0.0
14.4 0.6 -79.967 -59.235 8.32898 6.16961 0.0 0.0
15.6 0.65 -69.945 -51.811 8.33533 6.17432 0.0 0.0
16.8 0.7 -59.962 -44.416 8.31845 6.16182 0.0 0.0
18.0 0.75 -49.981 -37.023 8.32194 6.1644 0.0 0.0
19.2 0.8 -39.989 -29.622 8.32978 6.17021 0.0 0.0
20.4 0.85 -29.989 -22.214 8.33452 6.17372 0.0 0.0
21.6 0.9 -19.986 -14.805 8.33042 6.17068 0.0 0.0
22.8 0.95 -9.9963 -7.4047 8.32875 6.16944 0.0 0.0
24.0 1.0 0.00267 0.00198 8.32875 6.16944 0.0 0.0

These actions are transferred from the following analysis run:

Location: Span 4
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Linebeam with Temperature or Shrinkage
- ULS factor: 1.35 SLS factor: 1.0

Settlem ent of supports


- none defined -

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 78
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Beam Erection
Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 0.0 0.0 320.384 237.322 0.0 0.0
1.2 0.05 365.241 270.549 288.359 213.599 0.0 0.0
2.4 0.1 692.089 512.658 256.275 189.833 0.0 0.0
3.6 0.15 980.356 726.19 224.339 166.177 0.0 0.0
4.8 0.2 1230.27 911.315 192.234 142.396 0.0 0.0
6.0 0.25 1441.72 1067.94 160.214 118.677 0.0 0.0
7.2 0.3 1614.73 1196.1 128.109 94.8959 0.0 0.0
8.4 0.35 1749.43 1295.88 96.0049 71.1147 0.0 0.0
9.6 0.4 1845.41 1366.97 64.111 47.4896 0.0 0.0
10.8 0.45 1903.17 1409.75 32.133 23.8022 0.0 0.0
12.0 0.5 1922.44 1424.03 0.23912 0.17713 0.0 0.0
13.2 0.55 1903.21 1409.78 31.7389 23.5103 0.0 0.0
14.4 0.6 1846.04 1367.44 64.139 47.5104 0.0 0.0
15.6 0.65 1749.9 1296.22 96.2014 71.2603 0.0 0.0
16.8 0.7 1615.24 1196.47 128.222 94.9791 0.0 0.0
18.0 0.75 1442.2 1068.3 160.242 118.698 0.0 0.0
19.2 0.8 1230.65 911.596 192.262 142.416 0.0 0.0
20.4 0.85 980.662 726.416 224.283 166.135 0.0 0.0
21.6 0.9 692.247 512.776 256.409 189.932 0.0 0.0
22.8 0.95 365.336 270.619 288.429 213.651 0.0 0.0
24.0 1.0 0.0 0.0 320.463 237.38 0.0 0.0

These actions are transferred from the following analysis run:

Location: Span 4
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Linebeam with Erection of beam
- ULS factor: 1.35 SLS factor: 1.0

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 79
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Construction stage 1A
Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 0.0 0.0 114.133 84.543 0.0 0.0
1.2 0.05 136.962 101.453 114.138 84.5469 0.0 0.0
2.4 0.1 273.945 202.922 114.138 84.5469 0.0 0.0
3.6 0.15 410.898 304.369 114.126 84.5375 0.0 0.0
4.8 0.2 538.389 398.807 98.3053 72.8187 0.0 0.0
6.0 0.25 646.916 479.197 82.5061 61.1156 0.0 0.0
7.2 0.3 736.449 545.518 66.728 49.4281 0.0 0.0
8.4 0.35 807.049 597.814 50.971 37.7563 0.0 0.0
9.6 0.4 858.771 636.127 35.1084 26.0062 0.0 0.0
10.8 0.45 891.467 660.346 19.3303 14.3188 0.0 0.0
12.0 0.5 905.262 670.564 3.55217 2.63124 0.0 0.0
13.2 0.55 900.01 666.674 12.0993 8.96248 0.0 0.0
14.4 0.6 876.005 648.893 28.0041 20.7438 0.0 0.0
15.6 0.65 832.889 616.955 43.7822 32.4312 0.0 0.0
16.8 0.7 770.81 570.971 59.6658 44.1969 0.0 0.0
18.0 0.75 689.768 510.939 75.465 55.9 0.0 0.0
19.2 0.8 589.71 436.822 91.243 67.5874 0.0 0.0
20.4 0.85 470.762 348.713 107.063 79.3063 0.0 0.0
21.6 0.9 332.788 246.51 122.884 91.0251 0.0 0.0
22.8 0.95 175.864 130.269 138.657 102.709 0.0 0.0
24.0 1.0 0.0 0.0 154.452 114.409 0.0 0.0

These actions are transferred from the following analysis run:

Location: Span 4
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Linebeam with Construction stage 1A
- ULS factor: 1.35 SLS factor: 1.0

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 80
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Construction stage 1B
Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 -70.446 -52.182 46.7675 34.6426 0.0 0.0
1.2 0.05 -23.802 -17.631 30.9721 22.9423 0.0 0.0
2.4 0.1 3.88727 2.87946 15.1774 11.2425 0.0 0.0
3.6 0.15 12.6229 9.3503 0.61818 0.45791 0.0 0.0
4.8 0.2 11.8787 8.79904 0.61377 0.45465 0.0 0.0
6.0 0.25 11.1399 8.2518 0.61785 0.45767 0.0 0.0
7.2 0.3 10.4007 7.70424 0.61839 0.45806 0.0 0.0
8.4 0.35 9.65842 7.15439 0.61439 0.45510 0.0 0.0
9.6 0.4 8.92144 6.60847 0.61814 0.45788 0.0 0.0
10.8 0.45 8.17982 6.05913 0.6214 0.46029 0.0 0.0
12.0 0.5 7.43406 5.50671 0.61723 0.45721 0.0 0.0
13.2 0.55 6.69471 4.95905 0.62304 0.46151 0.0 0.0
14.4 0.6 5.94778 4.40576 0.61686 0.45694 0.0 0.0
15.6 0.65 5.20567 3.85605 0.61925 0.45871 0.0 0.0
16.8 0.7 4.46309 3.30599 0.62084 0.45988 0.0 0.0
18.0 0.75 3.71791 2.75401 0.61991 0.45919 0.0 0.0
19.2 0.8 2.97419 2.2031 0.61929 0.45874 0.0 0.0
20.4 0.85 2.23154 1.653 0.62034 0.45951 0.0 0.0
21.6 0.9 1.48703 1.10151 0.61943 0.45883 0.0 0.0
22.8 0.95 0.74360 0.55081 0.61976 0.45908 0.0 0.0
24.0 1.0 0.0 0.0 0.61976 0.45908 0.0 0.0

These actions are transferred from the following analysis run:

Location: Span 4
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Linebeam with Construction stage 1B
- ULS factor: 1.35 SLS factor: 1.0

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 81
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Construction stage 2
- none defined -

Construction stage 3
- none defined -

Surfacing 1
Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 -228.59 -190.49 62.2473 51.8728 0.0 0.0
1.2 0.05 -157.06 -130.88 56.9767 47.4806 0.0 0.0
2.4 0.1 -91.844 -76.537 51.7064 43.0886 0.0 0.0
3.6 0.15 -32.958 -27.465 46.4376 38.698 0.0 0.0
4.8 0.2 19.5948 16.329 41.1821 34.3184 0.0 0.0
6.0 0.25 65.8488 54.874 35.9113 29.9261 0.0 0.0
7.2 0.3 105.784 88.1531 30.6276 25.523 0.0 0.0
8.4 0.35 139.402 116.168 25.3602 21.1335 0.0 0.0
9.6 0.4 166.676 138.896 20.0963 16.7469 0.0 0.0
10.8 0.45 187.632 156.36 14.7681 12.3067 0.0 0.0
12.0 0.5 202.207 168.506 9.50429 7.92024 0.0 0.0
13.2 0.55 210.456 175.38 4.23819 3.53182 0.0 0.0
14.4 0.6 212.374 176.978 1.0442 0.87016 0.0 0.0
15.6 0.65 207.97 173.308 6.32187 5.26822 0.0 0.0
16.8 0.7 197.243 164.37 11.6001 9.66674 0.0 0.0
18.0 0.75 180.163 150.136 16.8446 14.0372 0.0 0.0
19.2 0.8 156.783 130.653 22.1257 18.4381 0.0 0.0
20.4 0.85 127.068 105.89 27.3809 22.8174 0.0 0.0
21.6 0.9 91.0388 75.8657 32.6623 27.2186 0.0 0.0
22.8 0.95 48.683 40.5691 37.9356 31.613 0.0 0.0
24.0 1.0 0.0 0.0 43.206 36.005 0.0 0.0

These actions are transferred from the following analysis run:


Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 82
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Location: Span 4
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Linebeam with Superimposed dead load
- ULS factor: 1.2 SLS factor: 1.0

Traffic gr1a TS - for Bending design 1 : [Max +ve]


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 288.6 213.778 12.0122 8.8979 0.0 0.0
1.2 0.05 274.186 203.101 12.0113 8.89727 0.0 0.0
2.4 0.1 797.762 590.935 420.121 311.201 0.0 0.0
3.6 0.15 1351.5 1001.11 652.963 483.677 0.0 0.0
4.8 0.2 1920.75 1422.78 282.847 209.516 0.0 0.0
6.0 0.25 2365.39 1752.14 282.639 209.362 0.0 0.0
7.2 0.3 2794.65 2070.11 507.869 376.199 0.0 0.0
8.4 0.35 3191.65 2364.19 176.84 130.993 0.0 0.0
9.6 0.4 3475.88 2574.72 143.869 106.569 0.0 0.0
10.8 0.45 3689.41 2732.9 140.15 103.815 0.0 0.0
12.0 0.5 3808.68 2821.24 114.528 84.8355 0.0 0.0
13.2 0.55 3845.2 2848.3 104.804 77.6325 0.0 0.0
14.4 0.6 3839.62 2844.16 177.729 131.651 0.0 0.0
15.6 0.65 3734.77 2766.49 79.7896 59.1034 0.0 0.0
16.8 0.7 3523.84 2610.25 110.669 81.9768 0.0 0.0
18.0 0.75 3222.11 2386.75 149.281 110.578 0.0 0.0
19.2 0.8 2764.63 2047.87 464.775 344.278 0.0 0.0
20.4 0.85 2218.94 1643.66 459.097 340.072 0.0 0.0
21.6 0.9 1611.65 1193.81 288.213 213.491 0.0 0.0
22.8 0.95 855.998 634.073 713.342 528.401 0.0 0.0
24.0 1.0 0.0 0.0 0.0 0.0 0.0 0.0

The actions are factored for transverse distribution.


Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 83
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

These actions are transferred from the following analysis run:

Location: Span 4
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum -ve Moments
- ULS factor: 1.35 SLS factor: 1.0

Traffic gr1a UDL - for Bending design 1 : [Max +ve]


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 198.449 146.999 32.2844 23.9144 0.0 0.0
1.2 0.05 218.509 161.858 29.4204 21.7929 0.0 0.0
2.4 0.1 324.856 240.634 135.201 100.149 0.0 0.0
3.6 0.15 561.851 416.186 271.604 201.188 0.0 0.0
4.8 0.2 926.967 686.642 289.566 214.493 0.0 0.0
6.0 0.25 1261.03 934.095 257.144 190.477 0.0 0.0
7.2 0.3 1546.25 1145.37 224.618 166.384 0.0 0.0
8.4 0.35 1778.07 1317.09 159.505 118.152 0.0 0.0
9.6 0.4 1955.11 1448.23 126.921 94.0156 0.0 0.0
10.8 0.45 2083.09 1543.03 94.0163 69.6417 0.0 0.0
12.0 0.5 2155.96 1597.01 200.062 148.194 0.0 0.0
13.2 0.55 2175.37 1611.39 213.274 157.981 0.0 0.0
14.4 0.6 2145.4 1589.19 36.0776 26.7241 0.0 0.0
15.6 0.65 2060.06 1525.97 260.734 193.137 0.0 0.0
16.8 0.7 1922.13 1423.8 354.991 262.956 0.0 0.0
18.0 0.75 1735.11 1285.26 464.669 344.199 0.0 0.0
19.2 0.8 1491.41 1104.75 1160.65 859.74 0.0 0.0
20.4 0.85 1196.46 886.269 1181.86 875.453 0.0 0.0
21.6 0.9 852.399 631.407 872.596 646.368 0.0 0.0
22.8 0.95 450.645 333.811 1787.9 1324.37 0.0 0.0
24.0 1.0 0.0 0.0 0.0 0.0 0.0 0.0

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 84
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 4
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum -ve Moments
- ULS factor: 1.35 SLS factor: 1.0

Traffic gr1b-gr5 - for Bending design 1 : [Max +ve]


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 193.001 142.964 8.0329 5.95029 0.0 0.0
1.2 0.05 183.362 135.824 8.03222 5.94979 0.0 0.0
2.4 0.1 577.408 427.709 499.85 370.259 0.0 0.0
3.6 0.15 986.317 730.605 483.297 357.998 0.0 0.0
4.8 0.2 1336.58 990.06 47.5532 35.2246 0.0 0.0
6.0 0.25 1628.34 1206.18 369.027 273.353 0.0 0.0
7.2 0.3 1974.31 1462.45 402.432 298.098 0.0 0.0
8.4 0.35 2211.26 1637.97 105.11 77.859 0.0 0.0
9.6 0.4 2361.35 1749.15 212.158 157.154 0.0 0.0
10.8 0.45 2556.9 1894.0 242.925 179.945 0.0 0.0
12.0 0.5 2615.01 1937.05 17.6902 13.1039 0.0 0.0
13.2 0.55 2647.36 1961.01 47.0254 34.8336 0.0 0.0
14.4 0.6 2659.24 1969.81 76.0877 56.3613 0.0 0.0
15.6 0.65 2567.22 1901.65 305.602 226.372 0.0 0.0
16.8 0.7 2381.01 1763.71 330.735 244.989 0.0 0.0
18.0 0.75 2224.32 1647.65 158.375 117.315 0.0 0.0
19.2 0.8 1902.8 1409.48 325.027 240.76 0.0 0.0
20.4 0.85 1515.02 1122.23 420.848 311.739 0.0 0.0
21.6 0.9 1116.6 827.111 12.0292 8.91048 0.0 0.0
22.8 0.95 600.1 444.518 500.084 370.432 0.0 0.0
24.0 1.0 0.0 0.0 0.0 0.0 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 85
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 4
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum -ve Moments
- ULS factor: 1.35 SLS factor: 1.0

Traffic gr1a TS - for Bending design 2 : [Max -ve]


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 -1592.6 -1179.7 515.041 381.512 0.0 0.0
1.2 0.05 -1242.2 -920.18 54.4208 40.3117 0.0 0.0
2.4 0.1 -1176.9 -871.81 54.4168 40.3087 0.0 0.0
3.6 0.15 -1111.6 -823.44 54.4237 40.3139 0.0 0.0
4.8 0.2 -1046.3 -775.03 54.3141 40.2327 0.0 0.0
6.0 0.25 -981.07 -726.72 54.2661 40.1971 0.0 0.0
7.2 0.3 -915.95 -678.48 54.2942 40.2179 0.0 0.0
8.4 0.35 -850.87 -630.28 54.3689 40.2732 0.0 0.0
9.6 0.4 -785.65 -581.96 54.3871 40.2868 0.0 0.0
10.8 0.45 -720.46 -533.67 54.5451 40.4038 0.0 0.0
12.0 0.5 -654.99 -485.18 54.5232 40.3875 0.0 0.0
13.2 0.55 -589.62 -436.76 54.6416 40.4752 0.0 0.0
14.4 0.6 -524.03 -388.17 54.5423 40.4017 0.0 0.0
15.6 0.65 -458.57 -339.68 54.5544 40.4107 0.0 0.0
16.8 0.7 -393.07 -291.16 54.565 40.4185 0.0 0.0
18.0 0.75 -327.53 -242.61 54.5471 40.4052 0.0 0.0
19.2 0.8 -262.02 -194.09 54.5751 40.426 0.0 0.0
20.4 0.85 -196.53 -145.58 54.6015 40.4456 0.0 0.0
21.6 0.9 -131.02 -97.052 54.5999 40.4444 0.0 0.0
22.8 0.95 -65.511 -48.527 54.5991 40.4438 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 86
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

24.0 1.0 0.0 0.0 0.0 0.0 0.0 0.0

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 4
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum +ve Moments
- ULS factor: 1.35 SLS factor: 1.0

Traffic gr1a UDL - for Bending design 2 : [Max -ve]


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 -2090.4 -1548.4 531.35 393.593 0.0 0.0
1.2 0.05 -1515.5 -1122.6 437.245 323.885 0.0 0.0
2.4 0.1 -1083.0 -802.23 298.512 221.12 0.0 0.0
3.6 0.15 -830.93 -615.5 130.071 96.3491 0.0 0.0
4.8 0.2 -758.93 -562.17 39.4155 29.1967 0.0 0.0
6.0 0.25 -711.61 -527.12 39.3749 29.1666 0.0 0.0
7.2 0.3 -664.37 -492.13 39.3827 29.1724 0.0 0.0
8.4 0.35 -617.15 -457.15 39.4207 29.2006 0.0 0.0
9.6 0.4 -569.87 -422.12 39.4456 29.2189 0.0 0.0
10.8 0.45 -522.58 -387.1 39.5675 29.3092 0.0 0.0
12.0 0.5 -475.1 -351.93 39.558 29.3022 0.0 0.0
13.2 0.55 -427.67 -316.79 39.6171 29.346 0.0 0.0
14.4 0.6 -380.11 -281.57 39.5771 29.3164 0.0 0.0
15.6 0.65 -332.62 -246.39 39.591 29.3267 0.0 0.0
16.8 0.7 -285.12 -211.2 39.603 29.3355 0.0 0.0
18.0 0.75 -237.58 -175.98 39.5792 29.3179 0.0 0.0
19.2 0.8 -190.05 -140.78 39.5888 29.3251 0.0 0.0
20.4 0.85 -142.55 -105.59 39.5944 29.3292 0.0 0.0
21.6 0.9 -95.032 -70.394 39.5996 29.333 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 87
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

22.8 0.95 -47.518 -35.199 39.6033 29.3358 0.0 0.0


24.0 1.0 0.0 0.0 0.0 0.0 0.0 0.0

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 4
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum +ve Moments
- ULS factor: 1.35 SLS factor: 1.0

Traffic gr1b-gr5 - for Bending design 2 : [Max -ve]


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 -1068.3 -791.34 353.274 261.684 0.0 0.0
1.2 0.05 -830.15 -614.92 36.367 26.9385 0.0 0.0
2.4 0.1 -786.51 -582.6 36.3638 26.9362 0.0 0.0
3.6 0.15 -742.87 -550.27 36.3743 26.9439 0.0 0.0
4.8 0.2 -699.19 -517.92 36.2959 26.8859 0.0 0.0
6.0 0.25 -655.61 -485.64 36.263 26.8614 0.0 0.0
7.2 0.3 -612.09 -453.4 36.2751 26.8704 0.0 0.0
8.4 0.35 -568.61 -421.19 36.3329 26.9133 0.0 0.0
9.6 0.4 -525.02 -388.9 36.3454 26.9225 0.0 0.0
10.8 0.45 -481.45 -356.63 36.4399 26.9925 0.0 0.0
12.0 0.5 -437.7 -324.22 36.4318 26.9865 0.0 0.0
13.2 0.55 -394.02 -291.86 36.5142 27.0475 0.0 0.0
14.4 0.6 -350.19 -259.4 36.4526 27.002 0.0 0.0
15.6 0.65 -306.45 -227.0 36.4567 27.0049 0.0 0.0
16.8 0.7 -262.67 -194.57 36.4607 27.0079 0.0 0.0
18.0 0.75 -218.88 -162.13 36.4547 27.0034 0.0 0.0
19.2 0.8 -175.09 -129.7 36.4689 27.014 0.0 0.0
20.4 0.85 -131.33 -97.284 36.4916 27.0309 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 88
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

21.6 0.9 -87.558 -64.858 36.4885 27.0285 0.0 0.0


22.8 0.95 -43.779 -32.429 36.4859 27.0266 0.0 0.0
24.0 1.0 0.0 0.0 0.0 0.0 0.0 0.0

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 4
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum +ve Moments
- ULS factor: 1.35 SLS factor: 1.0

Traffic gr1a TS - for Shear design 1


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 -304.22 -225.35 776.316 575.049 0.0 0.0
1.2 0.05 20.3035 15.0396 753.059 557.821 0.0 0.0
2.4 0.1 655.55 485.593 728.332 539.506 0.0 0.0
3.6 0.15 1270.7 941.257 701.661 519.749 0.0 0.0
4.8 0.2 1729.58 1281.17 659.049 488.185 0.0 0.0
6.0 0.25 2258.25 1672.77 629.147 466.035 0.0 0.0
7.2 0.3 2734.82 2025.79 597.956 442.931 0.0 0.0
8.4 0.35 3008.36 2228.42 533.944 395.514 0.0 0.0
9.6 0.4 3353.1 2483.77 515.052 381.52 0.0 0.0
10.8 0.45 3626.94 2686.62 479.925 355.5 0.0 0.0
12.0 0.5 3551.18 2630.5 416.806 308.745 0.0 0.0
13.2 0.55 3740.79 2770.96 376.005 278.522 0.0 0.0
14.4 0.6 3600.67 2667.17 374.942 277.735 0.0 0.0
15.6 0.65 3692.03 2734.84 439.565 325.604 0.0 0.0
16.8 0.7 3436.34 2545.44 477.306 353.56 0.0 0.0
18.0 0.75 3090.76 2289.45 477.658 353.821 0.0 0.0
19.2 0.8 2754.92 2040.68 573.875 425.092 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 89
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

20.4 0.85 2208.26 1635.75 613.408 454.377 0.0 0.0


21.6 0.9 1567.63 1161.21 653.167 483.828 0.0 0.0
22.8 0.95 855.998 634.073 713.342 528.401 0.0 0.0
24.0 1.0 0.0 0.0 773.824 573.203 0.0 0.0

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 4
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum Shears
- ULS factor: 1.35 SLS factor: 1.0

Traffic gr1a UDL - for Shear design 1


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 -2089.1 -1547.5 531.35 393.593 0.0 0.0
1.2 0.05 -1499.3 -1110.6 467.809 346.525 0.0 0.0
2.4 0.1 -980.9 -726.6 436.724 323.5 0.0 0.0
3.6 0.15 -525.74 -389.44 406.517 301.124 0.0 0.0
4.8 0.2 -196.85 -145.81 347.939 257.733 0.0 0.0
6.0 0.25 124.142 91.9568 320.061 237.082 0.0 0.0
7.2 0.3 375.866 278.419 294.01 217.785 0.0 0.0
8.4 0.35 391.406 289.93 244.389 181.029 0.0 0.0
9.6 0.4 567.62 420.459 222.999 165.184 0.0 0.0
10.8 0.45 685.44 507.733 199.863 148.047 0.0 0.0
12.0 0.5 595.033 440.765 159.001 117.778 0.0 0.0
13.2 0.55 556.359 412.118 144.328 106.91 0.0 0.0
14.4 0.6 1252.95 928.109 120.848 89.517 0.0 0.0
15.6 0.65 1326.57 982.645 157.929 116.984 0.0 0.0
16.8 0.7 1294.17 958.645 179.758 133.154 0.0 0.0
18.0 0.75 1256.44 930.695 200.389 148.437 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 90
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

19.2 0.8 1250.3 926.146 247.056 183.004 0.0 0.0


20.4 0.85 1020.64 756.033 274.462 203.305 0.0 0.0
21.6 0.9 743.891 551.03 302.375 223.982 0.0 0.0
22.8 0.95 440.122 326.016 361.775 267.982 0.0 0.0
24.0 1.0 0.0 0.0 398.44 295.141 0.0 0.0

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 4
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum Shears
- ULS factor: 1.35 SLS factor: 1.0

Traffic gr1b-gr5 - for Shear design 1


Actions are defined for the distance between supports
Span Location Bending Moment Shear Force Axial Force
(from left support) kN.m kN kN
dim (m ) pro ULS SLS ULS SLS ULS SLS
0.0 0.0 -124.48 -92.206 534.172 395.683 0.0 0.0
1.2 0.05 68.5285 50.7619 507.451 375.89 0.0 0.0
2.4 0.1 490.353 363.224 491.647 364.183 0.0 0.0
3.6 0.15 901.858 668.043 474.479 351.466 0.0 0.0
4.8 0.2 1211.52 897.426 446.802 330.965 0.0 0.0
6.0 0.25 1569.6 1162.67 427.416 316.604 0.0 0.0
7.2 0.3 1974.31 1462.45 402.432 298.098 0.0 0.0
8.4 0.35 2085.33 1544.69 375.342 278.031 0.0 0.0
9.6 0.4 2323.97 1721.46 353.286 261.694 0.0 0.0
10.8 0.45 2517.55 1864.85 330.519 244.829 0.0 0.0
12.0 0.5 2540.84 1882.1 295.204 218.67 0.0 0.0
13.2 0.55 2625.35 1944.7 271.187 200.88 0.0 0.0
14.4 0.6 2522.59 1868.58 262.68 194.578 0.0 0.0
15.6 0.65 2567.22 1901.65 305.602 226.372 0.0 0.0
16.8 0.7 2381.01 1763.71 330.735 244.989 0.0 0.0
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 91
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

18.0 0.75 2136.47 1582.57 356.056 263.745 0.0 0.0


19.2 0.8 1894.67 1403.46 394.68 292.355 0.0 0.0
20.4 0.85 1515.02 1122.23 420.848 311.739 0.0 0.0
21.6 0.9 1073.06 794.857 447.093 331.18 0.0 0.0
22.8 0.95 600.1 444.518 500.084 370.432 0.0 0.0
24.0 1.0 0.0 0.0 540.0 400.0 0.0 0.0

The actions are factored for transverse distribution.


These actions are transferred from the following analysis run:

Location: Span 4
Analysis time: 5/1/2018 11:10:52 AM
Analysis Loadcase - Moving Load for Maximum Shears
- ULS factor: 1.35 SLS factor: 1.0

--------------------------------------------------------------------------------

ANALYSIS DATA

Data for loss calculations

Shrinkage strain is calculated from the data provided.


Creep coefficient is calculated from the data provided.
Differential shrinkage is calculated from the data provided.
Percentage of total long term loss which occurs before the section is
made composite is 30.0 %

Age at start of drying shrinkage = 1.0 day


Ambient relative humidity = 80.0 %
Ambient temperature = 20.0 °C
Maximum Curing temperature = 20.0 °C

Creep calculations are based upon EN 1992-1-1


Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 92
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Data for shear calculations

Material property for transverse reinforcement: MP3: Grade 500 Es 200.0


Angle between concrete strut and beam axis, θ = 21.8014°
Angle between shear reinforcement and beam axis, α = 90.0°
Enhancement close to supports is included
Dimension from left support c/l to face of support = 0.0 m
Dimension from right support c/l to face of support = 0.0 m
Surface condition for precast / in-situ interface = Smooth
Longitudinal force ratio β is calculated
Angle for compression strut in slab, θf = 38.6598°

————————————————————————————————————————————————————————————————————————————————
STRUCTURE GEOMETRY

Line Beam Structure with 4 spans as follows:

—————————————————————————————————————————————————————————————
Span Span Elements Support at Left of span
Ref Length in span Displacement Rotation
m
—————————————————————————————————————————————————————————————
1 24.0 20 fixed free
2 24.0 20 fixed free
3 24.0 20 fixed free
4 24.0 20 fixed free
End support: fixed free

————————————————————————————————————————————————————————————————————————————————
STRUCTURE PROPERTIES
--------------------------------------------------------------------------------
STRUCTURE PROPERTY DATA
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 93
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

SP1: Span 1

Type: Prestressed Design Beam


Reference: SB1: Span 1
Material: MP2: C40/50 Ecm 35.2
Slab density factor: 1.0

—————————————————————————————————————————————————————————————————————————————
Ref Dim Ax Ay Az Iy Iz C γ
m mm² mm² mm² mm 4 mm 4 mm 4 kN/m³
—————————————————————————————————————————————————————————————————————————————
1 0.6 1.1357E6 0.0 0.0 4.477E11 2.926E11 3.719E11 24.676448
2 4.2 1.121E6 0.0 0.0 4.413E11 2.877E11 3.719E11 25.0
3 21.0 776646.7 0.0 0.0 2.459E11 1.792E11 3.719E11 36.083889

Notes: Axes refer to line beam local axes.


γ = (unit length weight) / (transformed section area)
Based on transformed section properties for beam and slab

Cracked Section Details:


from left: 0.0 m
from right: 3.6 m

Assigned to the following line beam spans:


1

SP2: Span 2

Type: Prestressed Design Beam


Reference: SB2: Span 2

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 94
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Material: MP2: C40/50 Ecm 35.2


Slab density factor: 1.0

—————————————————————————————————————————————————————————————————————————————
Ref Dim Ax Ay Az Iy Iz C γ
m mm² mm² mm² mm 4 mm 4 mm 4 kN/m³
—————————————————————————————————————————————————————————————————————————————
1 0.6 776646.7 0.0 0.0 2.459E11 1.792E11 3.719E11 36.083889
2 4.2 1.121E6 0.0 0.0 4.413E11 2.877E11 3.719E11 25.0

Notes: Axes refer to line beam local axes.


γ = (unit length weight) / (transformed section area)
Based on transformed section properties for beam and slab

Cracked Section Details:


from left: 3.6 m
from right: 3.6 m

Assigned to the following line beam spans:


2

SP3: Span 3

Type: Prestressed Design Beam


Reference: SB3: Span 3
Material: MP2: C40/50 Ecm 35.2
Slab density factor: 1.0

—————————————————————————————————————————————————————————————————————————————
Ref Dim Ax Ay Az Iy Iz C γ
m mm² mm² mm² mm 4 mm 4 mm 4 kN/m³
—————————————————————————————————————————————————————————————————————————————

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 95
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

1 0.6 776646.7 0.0 0.0 2.459E11 1.792E11 3.719E11 36.083889


2 4.2 1.121E6 0.0 0.0 4.413E11 2.877E11 3.719E11 25.0

Notes: Axes refer to line beam local axes.


γ = (unit length weight) / (transformed section area)
Based on transformed section properties for beam and slab

Cracked Section Details:


from left: 3.6 m
from right: 3.6 m

Assigned to the following line beam spans:


3

SP4: Span 4

Type: Prestressed Design Beam


Reference: SB4: Span 4
Material: MP2: C40/50 Ecm 35.2
Slab density factor: 1.0

—————————————————————————————————————————————————————————————————————————————
Ref Dim Ax Ay Az Iy Iz C γ
m mm² mm² mm² mm 4 mm 4 mm 4 kN/m³
—————————————————————————————————————————————————————————————————————————————
1 0.6 776646.7 0.0 0.0 2.459E11 1.792E11 3.719E11 36.083889
2 4.2 1.121E6 0.0 0.0 4.413E11 2.877E11 3.719E11 25.0
3 21.0 1.1357E6 0.0 0.0 4.477E11 2.926E11 3.719E11 24.676448

Notes: Axes refer to line beam local axes.


γ = (unit length weight) / (transformed section area)
Based on transformed section properties for beam and slab

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 96
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Cracked Section Details:


from left: 3.6 m
from right: 0.0 m

Assigned to the following line beam spans:


4

————————————————————————————————————————————————————————————————————————————————
STRUCTURE LOADS

LIVE LOAD ENVELOPE DATA


Envelope for EN1991:2

The following vehicle loads may be included in the envelope:


For Group gr1a:
LM1: Tandem System and UDL (Persistent)
For Groups gr1b and gr5:
LM2: Single Axle with amplification factor
not applied.

Vehicles move in both directions - at increments of 1m.

To allow for transverse distribution of loads, the moment and shear


effects will be multiplied by the following factors prior to transfer to
beam design modules:
Transverse Distribution factor for sagging moments : 1.0
Transverse Distribution factor for hogging moments : 1.0
Transverse Distribution factor for shears : 1.0

————————————————————————————————————————————————————————————————————————————————
LOAD CASES

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 97
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

L1: DL Girder sp1

1 Load type: uniform


Direction of application: global negative Z axis (gravity)
Load w 1 = 19.7744kN/m at x 1 = 0.0% of beam length
Load w 2 = 19.7744kN/m at x 2 = 85.0% of beam length

Loading is applied to the following line beam spans:


1

2 Load type: uniform


Direction of application: global negative Z axis (gravity)
Load w 1 = 19.7744kN/m at x 1 = 85.0004% of beam length
Load w 2 = 19.7744kN/m at x 2 = 100.0% of beam length

Loading is applied to the following line beam spans:


1

L2: DL Girder sp2

1 Load type: uniform


Direction of application: global negative Z axis (gravity)
Load w 1 = 19.7744kN/m at x 1 = 0.0% of beam length
Load w 2 = 19.7744kN/m at x 2 = 15.0% of beam length

Loading is applied to the following line beam spans:


2

2 Load type: uniform


Direction of application: global negative Z axis (gravity)
Load w 1 = 19.7744kN/m at x 1 = 15.0004% of beam length

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 98
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Load w 2 = 19.7744kN/m at x 2 = 85.0% of beam length

Loading is applied to the following line beam spans:


2

3 Load type: uniform


Direction of application: global negative Z axis (gravity)
Load w 1 = 19.7744kN/m at x 1 = 85.0004% of beam length
Load w 2 = 19.7744kN/m at x 2 = 100.0% of beam length

Loading is applied to the following line beam spans:


2

L3: DL Girder sp3

1 Load type: uniform


Direction of application: global negative Z axis (gravity)
Load w 1 = 19.7744kN/m at x 1 = 0.0% of beam length
Load w 2 = 19.7744kN/m at x 2 = 15.0% of beam length

Loading is applied to the following line beam spans:


3

2 Load type: uniform


Direction of application: global negative Z axis (gravity)
Load w 1 = 19.7744kN/m at x 1 = 15.0004% of beam length
Load w 2 = 19.7744kN/m at x 2 = 85.0% of beam length

Loading is applied to the following line beam spans:


3

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 99
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

3 Load type: uniform


Direction of application: global negative Z axis (gravity)
Load w 1 = 19.7744kN/m at x 1 = 85.0004% of beam length
Load w 2 = 19.7744kN/m at x 2 = 100.0% of beam length

Loading is applied to the following line beam spans:


3

L4: DL Girder sp4

1 Load type: uniform


Direction of application: global negative Z axis (gravity)
Load w 1 = 19.7744kN/m at x 1 = 0.0% of beam length
Load w 2 = 19.7744kN/m at x 2 = 15.0% of beam length

Loading is applied to the following line beam spans:


4

2 Load type: uniform


Direction of application: global negative Z axis (gravity)
Load w 1 = 19.7744kN/m at x 1 = 15.0004% of beam length
Load w 2 = 19.7744kN/m at x 2 = 100.0% of beam length

Loading is applied to the following line beam spans:


4

L5: DL Stage1A sp1

1 Load type: uniform

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 100
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Direction of application: global negative Z axis (gravity)


Load w 1 = 9.75kN/m at x 1 = 0.0% of beam length
Load w 2 = 9.75kN/m at x 2 = 85.0% of beam length

Loading is applied to the following line beam spans:


1

L6: DL Stage1A sp2

1 Load type: uniform


Direction of application: global negative Z axis (gravity)
Load w 1 = 9.75kN/m at x 1 = 15.0004% of beam length
Load w 2 = 9.75kN/m at x 2 = 85.0% of beam length

Loading is applied to the following line beam spans:


2

L7: DL Stage1A sp3

1 Load type: uniform


Direction of application: global negative Z axis (gravity)
Load w 1 = 9.75kN/m at x 1 = 15.0004% of beam length
Load w 2 = 9.75kN/m at x 2 = 85.0% of beam length

Loading is applied to the following line beam spans:


3

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 101
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

L8: DL Stage1A sp4

1 Load type: uniform


Direction of application: global negative Z axis (gravity)
Load w 1 = 9.75kN/m at x 1 = 15.0004% of beam length
Load w 2 = 9.75kN/m at x 2 = 100.0% of beam length

Loading is applied to the following line beam spans:


4

L9: DL Stage1B sp1

1 Load type: uniform


Direction of application: global negative Z axis (gravity)
Load w 1 = 9.75kN/m at x 1 = 85.0004% of beam length
Load w 2 = 9.75kN/m at x 2 = 100.0% of beam length

Loading is applied to the following line beam spans:


1

L10: DL Stage1B sp2

1 Load type: uniform


Direction of application: global negative Z axis (gravity)
Load w 1 = 9.75kN/m at x 1 = 0.0% of beam length
Load w 2 = 9.75kN/m at x 2 = 15.0% of beam length

Loading is applied to the following line beam spans:


2

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 102
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

2 Load type: uniform


Direction of application: global negative Z axis (gravity)
Load w 1 = 9.75kN/m at x 1 = 85.0004% of beam length
Load w 2 = 9.75kN/m at x 2 = 100.0% of beam length

Loading is applied to the following line beam spans:


2

L11: DL Stage1B sp3

1 Load type: uniform


Direction of application: global negative Z axis (gravity)
Load w 1 = 9.75kN/m at x 1 = 0.0% of beam length
Load w 2 = 9.75kN/m at x 2 = 15.0% of beam length

Loading is applied to the following line beam spans:


3

2 Load type: uniform


Direction of application: global negative Z axis (gravity)
Load w 1 = 9.75kN/m at x 1 = 85.0004% of beam length
Load w 2 = 9.75kN/m at x 2 = 100.0% of beam length

Loading is applied to the following line beam spans:


3

L12: DL Stage1B sp4

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 103
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

1 Load type: uniform


Direction of application: global negative Z axis (gravity)
Load w 1 = 9.75kN/m at x 1 = 0.0% of beam length
Load w 2 = 9.75kN/m at x 2 = 15.0% of beam length

Loading is applied to the following line beam spans:


4

L13: SDL sp1

1 Load type: uniform


Direction of application: global negative Z axis (gravity)
Load w 1 = 3.66kN/m at x 1 = 0.0% of beam length
Load w 2 = 3.66kN/m at x 2 = 100.0% of beam length

Loading is applied to the following line beam spans:


1

L14: SDL sp2

1 Load type: uniform


Direction of application: global negative Z axis (gravity)
Load w 1 = 3.66kN/m at x 1 = 0.0% of beam length
Load w 2 = 3.66kN/m at x 2 = 100.0% of beam length

Loading is applied to the following line beam spans:


2

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 104
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

L15: SDL sp3

1 Load type: uniform


Direction of application: global negative Z axis (gravity)
Load w 1 = 3.66kN/m at x 1 = 0.0% of beam length
Load w 2 = 3.66kN/m at x 2 = 100.0% of beam length

Loading is applied to the following line beam spans:


3

L16: SDL sp4

1 Load type: uniform


Direction of application: global negative Z axis (gravity)
Load w 1 = 3.66kN/m at x 1 = 0.0% of beam length
Load w 2 = 3.66kN/m at x 2 = 100.0% of beam length

Loading is applied to the following line beam spans:


4

L17: Diff. Tem p. pos sp1

1 Nodal loading details in global direction:


Force (kN) Moment (kN.m)
X-Axis 0.0 0.0
Y-Axis 0.0 -667.63
Z-Axis 0.0 0.0

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 105
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Loading is applied to the following 1 joints:


1

2 Nodal loading details in global direction:


Force (kN) Moment (kN.m)
X-Axis 0.0 0.0
Y-Axis 0.0 -10.468
Z-Axis 0.0 0.0

Loading is applied to the following 1 joints:


17

3 Nodal loading details in global direction:


Force (kN) Moment (kN.m)
X-Axis 0.0 0.0
Y-Axis 0.0 678.101
Z-Axis 0.0 0.0

Loading is applied to the following 1 joints:


21

L18: Diff. Tem p. rev sp1

1 Nodal loading details in global direction:


Force (kN) Moment (kN.m)
X-Axis 0.0 0.0
Y-Axis 0.0 229.837
Z-Axis 0.0 0.0

Loading is applied to the following 1 joints:


1
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 106
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

2 Nodal loading details in global direction:


Force (kN) Moment (kN.m)
X-Axis 0.0 0.0
Y-Axis 0.0 9.88852
Z-Axis 0.0 0.0

Loading is applied to the following 1 joints:


17

3 Nodal loading details in global direction:


Force (kN) Moment (kN.m)
X-Axis 0.0 0.0
Y-Axis 0.0 -239.73
Z-Axis 0.0 0.0

Loading is applied to the following 1 joints:


21

L19: Diff. Shrinkage sp1

1 Nodal loading details in global direction:


Force (kN) Moment (kN.m)
X-Axis 0.0 0.0
Y-Axis 0.0 239.057
Z-Axis 0.0 0.0

Loading is applied to the following 1 joints:


1

2 Nodal loading details in global direction:


Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 107
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

Force (kN) Moment (kN.m)


X-Axis 0.0 0.0
Y-Axis 0.0 -239.06
Z-Axis 0.0 0.0

Loading is applied to the following 1 joints:


17

L20: Diff. Tem p. pos sp2

1 Nodal loading details in global direction:


Force (kN) Moment (kN.m)
X-Axis 0.0 0.0
Y-Axis 0.0 -678.1
Z-Axis 0.0 0.0

Loading is applied to the following 1 joints:


21

2 Nodal loading details in global direction:


Force (kN) Moment (kN.m)
X-Axis 0.0 0.0
Y-Axis 0.0 678.101
Z-Axis 0.0 0.0

Loading is applied to the following 1 joints:


41

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 108
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

L21: Diff. Tem p. rev sp2

1 Nodal loading details in global direction:


Force (kN) Moment (kN.m)
X-Axis 0.0 0.0
Y-Axis 0.0 239.725
Z-Axis 0.0 0.0

Loading is applied to the following 1 joints:


21

2 Nodal loading details in global direction:


Force (kN) Moment (kN.m)
X-Axis 0.0 0.0
Y-Axis 0.0 -239.73
Z-Axis 0.0 0.0

Loading is applied to the following 1 joints:


41

L22: Diff. Shrinkage sp2

1 Nodal loading details in global direction:


Force (kN) Moment (kN.m)
X-Axis 0.0 0.0
Y-Axis 0.0 239.057
Z-Axis 0.0 0.0

Loading is applied to the following 1 joints:


25

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 109
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

2 Nodal loading details in global direction:


Force (kN) Moment (kN.m)
X-Axis 0.0 0.0
Y-Axis 0.0 -239.06
Z-Axis 0.0 0.0

Loading is applied to the following 1 joints:


37

L23: Diff. Tem p. pos sp3

1 Nodal loading details in global direction:


Force (kN) Moment (kN.m)
X-Axis 0.0 0.0
Y-Axis 0.0 -678.1
Z-Axis 0.0 0.0

Loading is applied to the following 1 joints:


41

2 Nodal loading details in global direction:


Force (kN) Moment (kN.m)
X-Axis 0.0 0.0
Y-Axis 0.0 678.101
Z-Axis 0.0 0.0

Loading is applied to the following 1 joints:


61

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 110
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

L24: Diff. Tem p. rev sp3

1 Nodal loading details in global direction:


Force (kN) Moment (kN.m)
X-Axis 0.0 0.0
Y-Axis 0.0 239.725
Z-Axis 0.0 0.0

Loading is applied to the following 1 joints:


41

2 Nodal loading details in global direction:


Force (kN) Moment (kN.m)
X-Axis 0.0 0.0
Y-Axis 0.0 -239.73
Z-Axis 0.0 0.0

Loading is applied to the following 1 joints:


61

L25: Diff. Shrinkage sp3

1 Nodal loading details in global direction:


Force (kN) Moment (kN.m)
X-Axis 0.0 0.0
Y-Axis 0.0 239.057
Z-Axis 0.0 0.0

Loading is applied to the following 1 joints:


45
Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 111
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

2 Nodal loading details in global direction:


Force (kN) Moment (kN.m)
X-Axis 0.0 0.0
Y-Axis 0.0 -239.06
Z-Axis 0.0 0.0

Loading is applied to the following 1 joints:


57

L26: Diff. Tem p. pos sp4

1 Nodal loading details in global direction:


Force (kN) Moment (kN.m)
X-Axis 0.0 0.0
Y-Axis 0.0 -678.1
Z-Axis 0.0 0.0

Loading is applied to the following 1 joints:


61

2 Nodal loading details in global direction:


Force (kN) Moment (kN.m)
X-Axis 0.0 0.0
Y-Axis 0.0 678.101
Z-Axis 0.0 0.0

Loading is applied to the following 1 joints:


81

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 112
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

L27: Diff. Tem p. rev sp4

1 Nodal loading details in global direction:


Force (kN) Moment (kN.m)
X-Axis 0.0 0.0
Y-Axis 0.0 239.725
Z-Axis 0.0 0.0

Loading is applied to the following 1 joints:


61

2 Nodal loading details in global direction:


Force (kN) Moment (kN.m)
X-Axis 0.0 0.0
Y-Axis 0.0 -239.73
Z-Axis 0.0 0.0

Loading is applied to the following 1 joints:


81

L28: Diff. Shrinkage sp4

1 Nodal loading details in global direction:


Force (kN) Moment (kN.m)
X-Axis 0.0 0.0
Y-Axis 0.0 239.057
Z-Axis 0.0 0.0

Loading is applied to the following 1 joints:


Autodesk Structural Bridge Design (18.0.696)
© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 113
Job: Calc. By:
Project: Untitled Checked:

Data File: C:\Users\user\Desktop\ASBD\try-3.sst 5/1/2018 12:15:10 PM

Data Report

65

2 Nodal loading details in global direction:


Force (kN) Moment (kN.m)
X-Axis 0.0 0.0
Y-Axis 0.0 -239.06
Z-Axis 0.0 0.0

Loading is applied to the following 1 joints:


81

————————————————————————————————————————————————————————————————————————————————

End

Autodesk Structural Bridge Design (18.0.696)


© 2018 Autodesk, Inc. All rights reserved. 5/1/2018 3:31 PM 114

You might also like