You are on page 1of 27

D/C No.

S1-8000-001IK

SA8000 Separation/Assembly Manual Date 2001-12-12

Page 1/27

Detail
◁◁ SA8000 SEPARATION ▷▷

1. SA8000 has very similar shape with SA6000CMT.


But the separation method is a little different.
D/C No. S1-8000-001IK

SA8000 Separation/Assembly Manual Date 2001-12-12

Page 2/27

Detail
◁◁ FRONT COVER OPEN ▷▷

1. Press the plastic in red circle. And pull the front cover.
You can take off the front cover.
D/C No. S1-8000-001IK

SA8000 Separation/Assembly Manual Date 2001-12-12

Page 3/27

Detail
1. Loosen a screw (2ea) in red circle, and pull the front
cover to below (like red arrow). You can take off the
front cover from the SA8000.
D/C No. S1-8000-001IK

SA8000 Separation/Assembly Manual Date 2001-12-12

Page 4/27

Detail
◁◁ PSA OPEN ▷▷

1. Loosen a screw (5ea) in red circle, and separate the


PSA from the SA8000.
D/C No. S1-8000-001IK

SA8000 Separation/Assembly Manual Date 2001-12-12

Page 5/27

Detail
1. Loosen a screw (10ea) in red circle, and separate the
B/D cover from the SA8000.
D/C No. S1-8000-001IK

SA8000 Separation/Assembly Manual Date 2001-12-12

Page 6/27

Detail
1. This picture is a step to remove PSA.
D/C No. S1-8000-001IK

SA8000 Separation/Assembly Manual Date 2001-12-12

Page 7/27

Detail
1. From left side, CW, BF1, BF2, DSP, DSC, V/M, PC
MOTH.
D/C No. S1-8000-001IK

SA8000 Separation/Assembly Manual Date 2001-12-12

Page 8/27

Detail
◁◁ SEPARATE MONITOR ▷▷

1. Loosen a screw (4ea) in red circle, and separate the


monitor from the SA8000.
D/C No. S1-8000-001IK

SA8000 Separation/Assembly Manual Date 2001-12-12

Page 9/27

Detail
◁◁ SIDE COVER OPEN ▷▷

1. To separate side cover, Loosen a screw (6ea) on front


and back.
D/C No. S1-8000-001IK

SA8000 Separation/Assembly Manual Date 2001-12-12

Page 10/27

Detail
1. Loosen a screw (7ea) in red circle, and separate the
Aluminum cover.
D/C No. S1-8000-001IK

SA8000 Separation/Assembly Manual Date 2001-12-12

Page 11/27

Detail
◁◁ HDD CHANGING ▷▷

1. The low square box of the picture is HDD guard box.


To change HDD, you have to take off this box.
D/C No. S1-8000-001IK

SA8000 Separation/Assembly Manual Date 2001-12-12

Page 12/27

Detail
1. Loosen a screw (3e a) in red circle, and pull the HDD
guard box. You can take off the HDD from the system.
D/C No. S1-8000-001IK

SA8000 Separation/Assembly Manual Date 2001-12-12

Page 13/27

Detail
1. You can take of HDD easily as left picture.
D/C No. S1-8000-001IK

SA8000 Separation/Assembly Manual Date 2001-12-12

Page 14/27

Detail
◁◁ POWER COVER OPEN ▷▷

1. To separate Power, press the plastic in red circle. And


pull the back cover. You can take off the low back cover.
D/C No. S1-8000-001IK

SA8000 Separation/Assembly Manual Date 2001-12-12

Page 15/27

Detail
1. Pull out the connector in red circle.
2. Loosen a screw (6ea) in blue circle, and open the
back Power cover.
D/C No. S1-8000-001IK

SA8000 Separation/Assembly Manual Date 2001-12-12

Page 16/27

Detail
◁◁ SEPARATE POWER ▷▷

1. Loosen a screw (2ea) in red circle, and pull the Power


module. You can take off the Power module form the
system.
D/C No. S1-8000-001IK

SA8000 Separation/Assembly Manual Date 2001-12-12

Page 17/27

Detail
◁◁ POWER COVER OPEN ▷▷

1. Loosen a screw (11ea) in red circle. Open the top


cover.
D/C No. S1-8000-001IK

SA8000 Separation/Assembly Manual Date 2001-12-12

Page 18/27

Detail
1. The picture is the inside form of Power.
D/C No. S1-8000-001IK

SA8000 Separation/Assembly Manual Date 2001-12-12

Page 19/27

Detail
◁◁ BACK COVER OPEN ▷▷

1. Loosen a screw (2ea) in red circle. Pull down the back


panel. You can open back cover panel.
D/C No. S1-8000-001IK

SA8000 Separation/Assembly Manual Date 2001-12-12

Page 20/27

Detail
◁◁ SEPARATE REAR PANEL ▷▷

1. Loosen a screw (4ea) in red circle. You can separate


the Rear panel from the system.
D/C No. S1-8000-001IK

SA8000 Separation/Assembly Manual Date 2001-12-12

Page 21/27

Detail
1. It is easy to separate Rear panel. Because it was
made by SLOT way.
D/C No. S1-8000-001IK

SA8000 Separation/Assembly Manual Date 2001-12-12

Page 22/27

Detail
◁◁ KEYBOARD & TOP COVER OPEN ▷▷

1. Open the cap (4ea) in red circle. And Loosen a screw


(4ea) in red circle
D/C No. S1-8000-001IK

SA8000 Separation/Assembly Manual Date 2001-12-12

Page 23/27

Detail
1. Loosen a screw (2ea) in red circle on the bottom
side of a keyboard.
D/C No. S1-8000-001IK

SA8000 Separation/Assembly Manual Date 2001-12-12

Page 24/27

Detail
1. Open the monitor neck cap. If you use small tool, you
could open it more easily.
D/C No. S1-8000-001IK

SA8000 Separation/Assembly Manual Date 2001-12-12

Page 25/27

Detail
1. Loosen a screw (4ea) in red circle. You can separate
monitor support.
D/C No. S1-8000-001IK

SA8000 Separation/Assembly Manual Date 2001-12-12

Page 26/27

Detail
1. Take off the rubber to surround monitor neck.
D/C No. S1-8000-001IK

SA8000 Separation/Assembly Manual Date 2001-12-12

Page 27/27

Detail
1. Lift the keyboard & top cover carefully.

You might also like