You are on page 1of 21

2/5/2019 MADE EASY ONLINE TEST SERIES

https://gw-mdsy.s3-accelerate.amazonaws.com/2019/student/profile/102988
Debashis Dash 
(Enroll User) Sign out

SINGLE SUBJECT : FLUID MECHANICS & HYDRAULIC MACHINES (GATE -


2019) - REPORTS
Debashis Dash OVERALL ANALYSIS COMPARISON REPORT SOLUTION REPORT
Course: GATE
Mechanical Engineering (ME)
ALL(33) CORRECT(0) INCORRECT(0) SKIPPED(33)

HOME

MY TEST Q. 1

BOOKMARKS Radius of a pipe is varying as where A is in meter and is in mm. Ratio of Reynolds
number between two points which are 2 m apart is approximately:
MY PROFILE FAQ Have any Doubt ?

REPORTS A
5
BUY PACKAGE
B
ASK AN EXPERT 6
Correct Option
OFFER
Solution :
EXCLUSIVE OFFER FOR OTS (b)
STUDENTS ONLY ON BOOK
PACKAGES

C
9

D
8

QUESTION ANALYTICS

Q. 2

A tank filled with water is moving in horizontal direction with a constant acceleration. Because of
acceleration, liquid surface take the shape as shown. Now along which line linear variation in static
pressure occur.

FAQ Have any Doubt ?

A
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1050&t=a&testType=2 1/21
2/5/2019 MADE EASY ONLINE TEST SERIES

Parallel to liquid surface AB


Debashis Dash 
(Enroll User) Sign out
B
Perpendicular to liquid surface AB
Correct Option

Solution :
(b)

Debashis Dash
Course: GATE C
Mechanical Engineering (ME) In horizontal (direction of a)

HOME
D
In vertical (direction of g)
MY TEST

BOOKMARKS QUESTION ANALYTICS

MY PROFILE

Q. 3
REPORTS
A balloon filled with helium (ρHe  < ρair) of dia 0.5 m and a ball (ρball > ρair) diameter 3 m is left in air.
BUY PACKAGE Just after release, balloon lifts up and ball goes down. Which of the following statement is correct,
FAQ Have any Doubt ?
ASK AN EXPERT
A
OFFER Buoyancy force is greater, in balloon than ball.

EXCLUSIVE OFFER FOR OTS


STUDENTS ONLY ON BOOK B
PACKAGES Buoyancy force is greater, in ball than balloon.
Correct Option

Solution :
(b)

C
Buoyancy in both balloon and ball is equal.

D
The numeric value of densities should be given to conclude anything.

QUESTION ANALYTICS

Q. 4

There are three containers as shown in figure labelled by A, B and C. All have equal cross section
area at bottom. Water is filled upto equal height in all of them and they are placed on weighing
machine as shown. Select the correct order:

FAQ Have any Doubt ?

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1050&t=a&testType=2 2/21
2/5/2019 MADE EASY ONLINE TEST SERIES

A
C<A<B Debashis Dash 
(Enroll User) Sign out

B
A≠B=C

C
B<A<C
Debashis Dash Correct Option
Course: GATE
Mechanical Engineering (ME) Solution :
(c)
HOME

MY TEST

BOOKMARKS

MY PROFILE

REPORTS

BUY PACKAGE

ASK AN EXPERT

OFFER

EXCLUSIVE OFFER FOR OTS D


STUDENTS ONLY ON BOOK A=B=C
PACKAGES

QUESTION ANALYTICS

Q. 5

A closed bent as shown in figure is dipped in a open channel. A small orifice is made at the end. Upto
what height ‘h’ water will spurt?

FAQ Have any Doubt ?

A
1.174 m
Correct Option

Solution :
(a)

B
1.374 m

C
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1050&t=a&testType=2 3/21
2/5/2019 MADE EASY ONLINE TEST SERIES
0.100 m
Debashis Dash 
(Enroll User) Sign out
D
1.274 m

QUESTION ANALYTICS

Debashis Dash Q. 6
Course: GATE
Mechanical Engineering (ME) An irrotational fluid is flowing ideally inside a circular pipe. One can apply Bernoulli’s equation
FAQ Have any Doubt ?

HOME
A
Between only two lines in the direction of flow
MY TEST

BOOKMARKS B
Between any two points inside the fluid
MY PROFILE Correct Option

REPORTS Solution :
(b)
Since flow is ideal and irrotational Bernoulli’s equation can be applied between any two points
BUY PACKAGE
inside the fluid.

ASK AN EXPERT
C
OFFER Between two cross section of pipe only

EXCLUSIVE OFFER FOR OTS


STUDENTS ONLY ON BOOK D
PACKAGES Between two points in a stream line.

QUESTION ANALYTICS

Q. 7

Which of the following graphs correctly represents the relationship between head and specific speed
for Kaplan and Francis turbines?
FAQ Have any Doubt ?

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1050&t=a&testType=2 4/21
2/5/2019 MADE EASY ONLINE TEST SERIES

Debashis Dash 
Correct Option
(Enroll User) Sign out

Solution :
(c)

Debashis Dash
Course: GATE
Mechanical Engineering (ME)

HOME

MY TEST

BOOKMARKS

MY PROFILE QUESTION ANALYTICS

REPORTS
Q. 8
BUY PACKAGE
Consider the following arrangement:

ASK AN EXPERT

OFFER

EXCLUSIVE OFFER FOR OTS


STUDENTS ONLY ON BOOK
PACKAGES

A and B are weighing machine based on springs. Initially the steel cube was not dipped, now when
the steel cube is dipped by some depth, reading on the weighing machines will
FAQ Have any Doubt ?

A
Increase
Correct Option

Solution :
(a)

B
Decrease

C
Does not change

D
Can’t say anything

QUESTION ANALYTICS

Q. 9

A small diameter glass tube is inserted in water as shown. Due to capillary there is level rise of water
by 5 cm inside the tube. Now a hole at height of 2 cm from the water surface level is done. Select the
correct conclusion.

FAQ Have any Doubt ?

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1050&t=a&testType=2 5/21
2/5/2019 MADE EASY ONLINE TEST SERIES

A
Debashis Dash 
Water will leakout as pressure at point (3) is more than atmosphere.
(Enroll User) Sign out

B
Water will leakout as pressure at point (3) is less than atmosphere.

C
Air will leak inside as pressure at point (3) is less than atmosphere.
Debashis Dash Correct Option
Course: GATE
Mechanical Engineering (ME)
Solution :
(c)
HOME The meniscus of fluid the pressure force is partially balanced by surfaced tension  force, so
pressure at point (1) is decreased from atmospheric pressure. Since at point (2) pressure is
equal to atmospheric pressure. So at point (3) pressure will be  intermediate and less than
MY TEST
atmospheric pressure. Hole created will cause the high pressure air to rush in the tube.

BOOKMARKS
D
MY PROFILE Air will leak inside as pressure at point (3) is more than atmosphere.

REPORTS
QUESTION ANALYTICS

BUY PACKAGE

ASK AN EXPERT Q. 10

A cylinder (diameter 4 m) of weight 50 kN is placed on the bottom of the tank as shown and oil and
OFFER water is poured in left and right side of tank respectively. Magnitude of horizontal force at centre that
should be applied on cylinder so that it does not roll is (for unit length) ________ kN.
EXCLUSIVE OFFER FOR OTS
STUDENTS ONLY ON BOOK
PACKAGES

FAQ Have any Doubt ?

0.7084 (0.700 - 0.715)


Correct Option

Solution :
0.7084 (0.700 - 0.715)

QUESTION ANALYTICS

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1050&t=a&testType=2 6/21
2/5/2019 MADE EASY ONLINE TEST SERIES

Debashis Dash 
(Enroll User) Sign out
Q. 11

Temperature of air in atmosphere is changing as T = t0 – kZ where Z is in meter and measured from


the earth’s surface to upwards. If the pressure and temperature at earth surface is equal to 101.325
kPa and 300 K. Pressure at height of 1 km is________ bar. Take k = 9 × 10–3 °C/m
FAQ Have any Doubt ?

Debashis Dash
0.903 (0.89 - 0.91)
Course: GATE
Correct Option
Mechanical Engineering (ME)

Solution :
HOME 0.903 (0.89 - 0.91)

MY TEST

BOOKMARKS

MY PROFILE

REPORTS

BUY PACKAGE

ASK AN EXPERT

OFFER QUESTION ANALYTICS

EXCLUSIVE OFFER FOR OTS


STUDENTS ONLY ON BOOK
PACKAGES Q. 12

A closed tank is shown in figure below:

If the absolute pressure at point A is 150 kPa. The gauge pressure at point ‘B’ when atmosphere
pressure is 760 mm of Hg is equal to________ kPa.
FAQ Have any Doubt ?

31.92 (31.5 - 32.5)


Correct Option

Solution :
31.92 (31.5 - 32.5)

QUESTION ANALYTICS

Q. 13

A hydraulic power plant as shown in figure takes in 25 m3/s of water through its turbine and
discharges it at V2 = 1.5 m/s at atmospheric pressure. The head loss in the turbine and penstock
system is hf = 20 m. The power extracted by the turbine is________ MW (Tage, g = 10 m/s2)
(Correct upto two decimal place)

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1050&t=a&testType=2 7/21
2/5/2019 MADE EASY ONLINE TEST SERIES

Debashis Dash 
(Enroll User) Sign out

Have any Doubt ?

18.72 (18.70 - 18.74)


Debashis Dash Correct Option
Course: GATE
Mechanical Engineering (ME)
Solution :
18.72 (18.70 - 18.74)
HOME

MY TEST

BOOKMARKS

MY PROFILE

REPORTS

BUY PACKAGE
QUESTION ANALYTICS
ASK AN EXPERT

OFFER
Q. 14
EXCLUSIVE OFFER FOR OTS
A car with arrangement for water flow is attached to the wall by a spring as shown in figure below.
STUDENTS ONLY ON BOOK
The compression of the spring, if its spring constant is 1.8 kN/m, will be ________ cm.
PACKAGES
[Correct upto two decimal place]

FAQ Have any Doubt ?

6.262 (6.20 - 6.32)


Correct Option

Solution :
6.262 (6.20 - 6.32)

QUESTION ANALYTICS

Q. 15

A barometer is used to measure the height of a building. At the ground floor barometer reads 755
mm Hg and at the rooftop it reads 740 mm Hg. Consider an average density of air as 1.175 kg/m3.
The height of building is________m.
Have any Doubt ?

173.596 (172.5 - 173.7)


Correct Option

Solution :
173.596 (172.5 - 173.7)

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1050&t=a&testType=2 8/21
2/5/2019 MADE EASY ONLINE TEST SERIES

Debashis Dash 
(Enroll User) Sign out

Debashis Dash
Course: GATE
Mechanical Engineering (ME)

HOME

MY TEST

BOOKMARKS

MY PROFILE
QUESTION ANALYTICS
REPORTS

BUY PACKAGE
Q. 16

ASK AN EXPERT Water flows in a pipe network as shown

OFFER

EXCLUSIVE OFFER FOR OTS


STUDENTS ONLY ON BOOK
PACKAGES

Value of to satisfy the continuity of fluid motion is equal to________.


Have any Doubt ?

180
Correct Option

Solution :
180

QUESTION ANALYTICS

Q. 17

An ideal fluid flows from a small hole at the bottom of a large tank radially. If the steady column flow
rate is 2 What will be convective acceleration in radial direction at 10 cm from the hole.
FAQ Have any Doubt ?

A
100 mm/s2

B
0.101 mm/s2

C
20.26 mm/s2
Correct Option

Solution :
( )
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1050&t=a&testType=2 9/21
2/5/2019 MADE EASY ONLINE TEST SERIES
(c)
Debashis Dash 
(Enroll User) Sign out

Debashis Dash
Course: GATE
Mechanical Engineering (ME)

HOME

MY TEST
D
324 mm/s2
BOOKMARKS

MY PROFILE QUESTION ANALYTICS

REPORTS

Q. 18
BUY PACKAGE
During axi-symmetric region of irrotational flow Laplace equation is
ASK AN EXPERT ψ = Stream function
Φ = Velocity potential function
FAQ Have any Doubt ?
OFFER

EXCLUSIVE OFFER FOR OTS A


STUDENTS ONLY ON BOOK Valid for Both ψ and Φ
PACKAGES

B
Valid for ψ but not for Φ

C
Valid for Φ but not ψ
Correct Option

Solution :
(c)

D
Can’t use Laplace equation in axis symmetric flow.

QUESTION ANALYTICS

Q. 19

In a two dimensional laminar flow near a solid wall as shown the velocity component is given by

 
where U is free stream velocity. Which of the following expression represents the velocity component
perpendicular to wall?
FAQ Have any Doubt ?

B
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1050&t=a&testType=2 10/21
2/5/2019 MADE EASY ONLINE TEST SERIES
B
Debashis Dash 
(Enroll User) Sign out

Debashis Dash Correct Option


Course: GATE
Mechanical Engineering (ME) Solution :
(c)

HOME

MY TEST

BOOKMARKS

MY PROFILE

REPORTS

BUY PACKAGE

ASK AN EXPERT

OFFER

EXCLUSIVE OFFER FOR OTS


STUDENTS ONLY ON BOOK
PACKAGES

QUESTION ANALYTICS

Q. 20

A siphon tube is used to discharge oil at 25°C from a tank as shown. For flow to be continuous what
is the value of maximum height ‘H’? (Atmospheric pressure head as 10.2 of water and there is no
frictional losses)

FAQ Have any Doubt ?

A
8.5 m
Correct Option

Solution :
(a)

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1050&t=a&testType=2 11/21
2/5/2019 MADE EASY ONLINE TEST SERIES

Debashis Dash 
(Enroll User) Sign out

Debashis Dash
Course: GATE
Mechanical Engineering (ME)

HOME

MY TEST

BOOKMARKS

MY PROFILE

REPORTS

BUY PACKAGE B
9.5 m
ASK AN EXPERT

C
OFFER
12 m
EXCLUSIVE OFFER FOR OTS
STUDENTS ONLY ON BOOK
PACKAGES D
7m

QUESTION ANALYTICS

Q. 21

Air is flowing in a pipe from section (1) to section (2) in a pipe adiabatically (reversible) as shown.
Neglecting the intermolecular forces, the velocity of flow at exit is

FAQ Have any Doubt ?

A
22.44 m/s
Correct Option

Solution :
(a)
 

B
44.22 m/s

C
23.33 m/s

D
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1050&t=a&testType=2 12/21
2/5/2019 MADE EASY ONLINE TEST SERIES
D
12.33 m/s
Debashis Dash 
(Enroll User) Sign out

QUESTION ANALYTICS

Q. 22

A cubical steel block is floating in mercury as shown. Now a small disturbing couple is applied about
Debashis Dash one of its transverse axis. The body will oscillate with a natural frequency of
Course: GATE
Mechanical Engineering (ME)

HOME

MY TEST Have any Doubt ?

BOOKMARKS A
848 Hz
MY PROFILE

B
REPORTS
1.35 Hz

BUY PACKAGE
C
ASK AN EXPERT 7.4 Hz

OFFER
D
EXCLUSIVE OFFER FOR OTS Body will not oscillate
STUDENTS ONLY ON BOOK Correct Option
PACKAGES
Solution :
(d)

QUESTION ANALYTICS

Q. 23

A man of mass 785 N(on earth) is standing on a platform as shown. In the column at left side,
what should be height of water if the whole arrangement is shifted on moon (Note: gmoon = gearth/6).

FAQ Have any Doubt ?

A
0.8 m
Correct Option

Solution :
(a)

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1050&t=a&testType=2 13/21
2/5/2019 MADE EASY ONLINE TEST SERIES

Debashis Dash 
(Enroll User) Sign out

B
0.133 m
Debashis Dash
Course: GATE
Mechanical Engineering (ME) C
4.8 m
HOME

D
MY TEST
0.167 m

BOOKMARKS
QUESTION ANALYTICS
MY PROFILE

REPORTS
Q. 24

BUY PACKAGE
In a turbulent flow over plate velocity profile is approximated as (1/7) power law i.e.

ASK AN EXPERT
Free stream velocity of water is 2 m/s. If the kinematic viscosity of water is equal to 10–6 m2/s. What
will be value of (approximated) wall shear stress at a distance of 1.2 m from leading edge, if
OFFER boundary layer is tripped at leading edge to make it turbulent?
FAQ Have any Doubt ?
EXCLUSIVE OFFER FOR OTS
STUDENTS ONLY ON BOOK
PACKAGES A
0.84 Pa

B
6.29 Pa
Correct Option

Solution :
(b)

C
2.44 Pa

D
Can’t be determined

QUESTION ANALYTICS

Q. 25

A man of volume 1.2 m3 measures his weight by a weighing machine as 700 N. If he measures his

weight on moon what will be reading of weighing machine? (ρair = 1.1 kg/m3

h)
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1050&t=a&testType=2 14/21
2/5/2019 MADE EASY ONLINE TEST SERIES
on earth)
Debashis FAQ Have any Doubt ?
Dash 
(Enroll User) Sign out
A
116.67 N

B
118.82 N
Correct Option
Debashis Dash
Course: GATE Solution :
Mechanical Engineering (ME) (b)

HOME

MY TEST

BOOKMARKS

MY PROFILE

REPORTS

BUY PACKAGE

ASK AN EXPERT

OFFER

EXCLUSIVE OFFER FOR OTS


STUDENTS ONLY ON BOOK
PACKAGES

C
114.51 N

D
The machine can’t take reading

QUESTION ANALYTICS

Q. 26

A conical wooden block (as shown) is floating in an oil of specific gravity 0.9. Wooden block has
specific gravity of 0.6.

Its metacentric height is equal to________ cm.


FAQ Have any Doubt ?

6.96 (6.8 - 7.2)


Correct Option

Solution :
6.96 (6.8 - 7.2)

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1050&t=a&testType=2 15/21
2/5/2019 MADE EASY ONLINE TEST SERIES

Debashis Dash 
(Enroll User) Sign out

Debashis Dash
Course: GATE
Mechanical Engineering (ME)

HOME

MY TEST

BOOKMARKS

MY PROFILE

REPORTS

BUY PACKAGE

ASK AN EXPERT

OFFER

EXCLUSIVE OFFER FOR OTS


STUDENTS ONLY ON BOOK
PACKAGES

QUESTION ANALYTICS

Q. 27

In the arrangement as shown; Gate ’OA’ has width of 2 m inside. Hinge passes through O and rope
AB is horizontal, volume of the weight ‘W ’ when it is made of a material which has a relative density
of 6.5 equal to______ Litre.

FAQ Have any Doubt ?

71.8 (71 - 72.5)


Correct Option

Solution :
71.8 (71 - 72.5)

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1050&t=a&testType=2 16/21
2/5/2019 MADE EASY ONLINE TEST SERIES

Debashis Dash 
(Enroll User) Sign out

Debashis Dash
Course: GATE
Mechanical Engineering (ME)

HOME

MY TEST

BOOKMARKS
QUESTION ANALYTICS

MY PROFILE

REPORTS Q. 28

The speed of propagation C of a capillary wave in deep water is known to be a function only of
BUY PACKAGE density ρ, wave length and surface tension σ. For a given density and wave length. if the surface
tension is doubled, propagation speed changes by ________ percentage.
ASK AN EXPERT Have any Doubt ?

OFFER
41.4 (41.0 - 41.8)
EXCLUSIVE OFFER FOR OTS Correct Option
STUDENTS ONLY ON BOOK
PACKAGES
Solution :
41.4 (41.0 - 41.8)

QUESTION ANALYTICS

Q. 29

The velocity of whirl at inlet to the runner of an inward flow reactions turbine is m/s and

the velocity of flow at inlet is m/s . The velocity of whirl at exit is   m/s , in the

same direction as at inlet and the velocity of flow at exit is m/s , where H is the head in
meters. The inner diameter of the runner is 0.7 times the outer diameter. Assume hydraulic efficiency
of 83%. The angles of the runner vanes at inlet is________ degree.
Have any Doubt ?

25.31 (25.15 - 25.45)


https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1050&t=a&testType=2 17/21
2/5/2019 MADE EASY ONLINE TEST SERIES
( )
Correct Option
Debashis Dash 
(Enroll User) Sign out
Solution :
25.31 (25.15 - 25.45)

Debashis Dash
Course: GATE
Mechanical Engineering (ME)

HOME

MY TEST

BOOKMARKS

MY PROFILE

REPORTS

BUY PACKAGE QUESTION ANALYTICS

ASK AN EXPERT

Q. 30
OFFER
A tube of length 30 cm and cross section area of 5 cm2 is filled with 100 cc water, one end of tube is
EXCLUSIVE OFFER FOR OTS
STUDENTS ONLY ON BOOK closed and another is open. Now this tube is rotated in horizontal plane about a vertical axis which
PACKAGES passes through open end. Now when the tube is rotating at 100 rad/s a small orifice hole is done on
closed end. Velocity of water coming out ________m/s. [Correct upto one decimal place]
FAQ Have any Doubt ?

28.28 (28.00 - 28.60)


Correct Option

Solution :
28.28 (28.00 - 28.60)

QUESTION ANALYTICS

Q. 31

Water flows in a rectangular cross section duct as shown. Pressure difference between point (A) and
(B) is 3 mm of Hg. Duct is 0.5 m deep and 0.25 m wide. When the flow is approximated as
i i l d if h di h i
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1050&t=a&testType=2 18/21
2/5/2019 MADE EASY ONLINE TEST SERIES
irrotational and uniform then discharge is________
Debashis Dash 
(Enroll User) Sign out

Debashis Dash
Course: GATE
Mechanical Engineering (ME)
FAQ Have any Doubt ?

HOME
113.5 (112.8 - 114.2)
MY TEST Correct Option

BOOKMARKS Solution :
113.5 (112.8 - 114.2)
MY PROFILE

REPORTS

BUY PACKAGE

ASK AN EXPERT

OFFER

EXCLUSIVE OFFER FOR OTS


STUDENTS ONLY ON BOOK
PACKAGES

QUESTION ANALYTICS

Q. 32

A velocity field is given by as initial condition.

Where are in meter. The displacement of a particle of fluid when time changes from t = 0 to t
= 1 seconds is equal to _________ m.
FAQ Have any Doubt ?

35.40 (35.2 - 35.6)


Correct Option

Solution :
35.40 (35.2 - 35.6)

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1050&t=a&testType=2 19/21
2/5/2019 MADE EASY ONLINE TEST SERIES

Debashis Dash 
(Enroll User) Sign out

Debashis Dash
Course: GATE
Mechanical Engineering (ME)

HOME

MY TEST

BOOKMARKS

MY PROFILE

REPORTS

QUESTION ANALYTICS
BUY PACKAGE

ASK AN EXPERT
Q. 33

OFFER To spray water in a cricket ground, an unequal arm type sprinkler is used. The pivot is assumed to be
spring loaded. The whole assembly can rotate about an axis passing through the pivot. The total
EXCLUSIVE OFFER FOR OTS
discharge is equal to and diameter of each nozzle is 8 mm. If the arms rotate at 100 rpm as
STUDENTS ONLY ON BOOK
PACKAGES shown and stiffness of spring is 2 N-m/rad magnitude of angular deflection of spring is ________
degree.

FAQ Have any Doubt ?

25.57 (25 - 26)


Correct Option

Solution :
25.57 (25 - 26)

QUESTION ANALYTICS
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1050&t=a&testType=2 20/21
2/5/2019 MADE EASY ONLINE TEST SERIES
QUESTION ANALYTICS

Debashis Dash 
(Enroll User) Sign out

Debashis Dash
Course: GATE
Mechanical Engineering (ME)

HOME

MY TEST

BOOKMARKS

MY PROFILE

REPORTS

BUY PACKAGE

ASK AN EXPERT

OFFER

EXCLUSIVE OFFER FOR OTS


STUDENTS ONLY ON BOOK
PACKAGES

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1050&t=a&testType=2 21/21

You might also like