Professional Documents
Culture Documents
Changed
Changed
Changed
Changed
Changed Changed
Changed
Changed
Changed
Changed Changed
Changed
Changed
Changed
Changed Changed
Changed Changed
Changed Changed
Changed
Changed Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed Changed
Changed Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed Changed
Changed Changed
Changed Changed
Changed Changed
Changed Changed
Changed Changed
Changed Changed
Changed
Changed
Changed
Changed
Changed Changed
Changed
Changed Changed
Changed Changed
Changed Changed
Changed
Changed
Changed
Changed
Changed
Changed Changed
Changed
Changed
Changed Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed Changed
Changed Changed
Changed
Changed
Changed Changed
Changed Changed
Changed Changed
Changed
Changed
Changed
Changed
Changed Changed
Changed Changed
Changed Changed
Changed Changed
Changed Changed
Changed Changed
Changed Changed
Changed Changed
Changed Changed
Changed Changed
Changed Changed
Changed Changed
Changed Changed
Changed Changed
Changed Changed
Changed Changed
Changed Changed
Changed Changed
Changed Changed
Changed Changed
Changed
Changed Changed
Changed
Changed
Changed
Changed Changed
Changed Changed
Changed
Changed
Changed
Changed
Changed
New
Changed
Changed
Changed
Changed
Changed Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed Changed
Changed Changed
Changed
Changed
Changed
Changed
Changed Changed
Changed Changed
Changed Changed
Changed Changed
Changed
Changed Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed Changed
Changed Changed
Changed
Changed
Changed
Changed
Changed Changed
Changed Changed
Changed
Changed
Changed
Changed
Changed
Changed Changed
Changed
Changed Changed
Changed Changed
Changed Changed
Changed Changed
Changed Changed
Changed Changed
Changed Changed
Changed Changed
Changed
Changed
Changed
Changed Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed Changed
Changed New
New
Changed
New
Changed Changed
New
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
New
New
Changed New
Changed Changed
Changed
Changed
Changed New
Changed New
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed Changed
Changed
Changed Changed
Changed
Changed
New
New
New
Changed
Changed Changed
Changed
Changed Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed Changed
Changed
Changed
Changed
New
Removed Removed
Removed Removed
Removed Removed
Removed Removed
Removed
Removed
Removed
Removed
Removed
Removed
Removed
Removed
Removed
Removed
Removed
Removed
Removed
Removed
Removed
Removed
Removed
Removed
Removed
Removed
Removed
Removed
Removed
Removed
Removed
Removed
Removed
Removed
Removed
Removed
Removed
Removed
Removed
Removed
Fault ID and Name
2:EFaultId_UnitOverheatAl
6:EFaultId_SwDownloadAl
9:EFaultId_DacWordChangeAl
10:EFaultId_NoConnectionToUnitAl
12:EFaultId_TcomConfigAl
16:EFaultId_SynchronizationAl
23:EFaultId_IncompatibleSwVersionAl
24:EFaultId_ObsoleteSwVersionAl
26:EFaultId_NtpTimeNotSetAl
27:EFaultId_FileServerAl
28:EFaultId_SwPackageAl
29:EFaultId_FileCorruptionAl
48:EFaultId_UnitBlockedAl
49:EFaultId_CellBlockedAl
50:EFaultId_BTSBlockedAl
52:EFaultId_UnitAutonomousResetAl
69:EFaultId_Post_test_failedAl
94:EFaultId_UnknownUnitType
95:EFaultId_NotSupportedUnit
214:EFaultId_FlashWrAl
215:EFaultId_FlashRdAl
216:EFaultId_FlashEraseAl
217:EFaultId_FlashDrvAl
218:EFaultId_FlashDbChksumAl
412:EFaultId_LostFrameSync
418:EFaultId_OseFatalErr
476:EFaultId_Rp3BusError
1400:EFaultId_ExtAl0
1401:EFaultId_ExtAl1
1402:EFaultId_ExtAl2
1403:EFaultId_ExtAl3
1404:EFaultId_ExtAl4
1405:EFaultId_ExtAl5
1406:EFaultId_ExtAl6
1407:EFaultId_ExtAl7
1408:EFaultId_ExtAl8
1409:EFaultId_ExtAl9
1410:EFaultId_ExtAl10
1411:EFaultId_ExtAl11
1412:EFaultId_ExtAl12
1413:EFaultId_ExtAl13
1414:EFaultId_ExtAl14
1415:EFaultId_ExtAl15
1416:EFaultId_ExtAl16
1417:EFaultId_ExtAl17
1418:EFaultId_ExtAl18
1419:EFaultId_ExtAl19
1420:EFaultId_ExtAl20
1421:EFaultId_ExtAl21
1422:EFaultId_ExtAl22
1423:EFaultId_ExtAl23
1424:EFaultId_ExtAl24
1425:EFaultId_ExtAl25
1802:EFaultId_FileRequestFlashAl
1806:EFaultId_CommunicationFailureAl
1807:EFaultId_InvalidFrequencyChannelForBTSHW
1811:EFaultId_BbBus_ConfFailedAl
1815:EFaultId_BbBus_SyncFailedAl
1816:EFaultId_Trans_Clk_MsgAl
1817:EFaultId_Ov_Osc_HeatAl
1818:EFaultId_Ov_OscAl
1819:EFaultId_OcxoClkMissAl
1825:EFaultId_PublicIPmissingAl
1827:EFaultId_StartTempBelowMinAl
1834:EFaultId_AboveCurrentWindowAl
1835:EFaultId_BelowCurrentWindowAl
1836:EFaultId_ALOvercurrentAl
1837:EFaultId_VSWRMajorAl
1838:EFaultId_VSWRMinorAl
1839:EFaultId_LNAFailureAl
1840:EFaultId_TuningFailureAl
1841:EFaultId_UnitFaultyAl
1842:EFaultId_MotorJamAl
1843:EFaultId_ActuatorJamAl
1844:EFaultId_NotCalibratedAl
1845:EFaultId_NotConfiguredAl
1846:EFaultId_ActuatorInterferenceAl
1847:EFaultId_HardwareErrorAl
1848:EFaultId_WorkingSoftwareMissingAl
1850:EFaultId_SwCorruptedAl
1858:EFaultId_FaultyFcmConfigurationAl
1860:EFaultId_HeatingMatNotWorkingAl
1868:EFaultId_NotEnoughHwForLcrAl
1869:EFaultId_MinorTMAFaultAl
1870:EFaultId_MajorTMAFaultAl
1871:EFaultId_BusyAl
1872:EFaultId_FormatErrorAl
1873:EFaultId_UnsupportedProcedureAl
1874:EFaultId_OutOfRangeAl
1875:EFaultId_SRAMRdAl
1876:EFaultId_SRAMWrAl
1898:EFaultId_PpsRefMissAl
1899:EFaultId_2MExtRefMissAl
1900:EFaultId_FrConfiguringFailed
1901:EFaultId_FrCriticalFileNotFound
1902:EFaultId_FrFileNotFound
1903:EFaultId_FrFrameClockMissing
1904:EFaultId_FrRfBbBusSynchError
1905:EFaultId_FrRfBbBusConfigError
1906:EFaultId_FrRfBbBusConnTransError
1907:EFaultId_FrTxOutOfOrder
1908:EFaultId_FrGainAdjust
1910:EFaultId_FrFilterInputPowerMissing
1911:EFaultId_FrRxOutOfOrder
1912:EFaultId_FrOutOfOrder
1918:EFaultId_FrPowerOutputFault
1920:EFaultId_FrNoFeedBackSignal
1921:EFaultId_FrTransmissionQualityDetoriated
1922:EFaultId_FrTemperatureTooLow
1923:EFaultId_FrUnitUnidentified
1924:EFaultId_FrConfigurationFileCorrupted
1925:EFaultId_FrPostTestFailed
1926:EFaultId_FrModuleClockFaulty
1927:EFaultId_FrPowerDecreased
1928:EFaultId_FrFpgaSwUpdateFailed
1931:EFaultId_FrBlocked
1932:EFaultId_FrNoFansDetected
1933:EFaultId_FrFanBroken
1934:EFaultId_FrFanReducedSetSpeed
1935:EFaultId_FrFanOverSpeed
1936:EFaultId_FrTempHigh
1937:EFaultId_FrDangerouslyOverheat
1938:EFaultId_FrPipeOverheat
1955:EFaultId_IncrBerOnRp3
1956:EFaultId_CritBerOnRp3
1957:EFaultId_AntennaLineSwitchedOffAl
1958:EFaultId_Rp3CollisionOnFr
2000:EFaultId_OIC_TxAl
2001:EFaultId_OIC_PresAl
2002:EFaultId_OIC_RxAl
2004:EFaultId_OIC_LVDSRecAl
2005:EFaultId_OIC_SyncChAl
2006:EFaultId_OIC_DBRxFullAl
2007:EFaultId_OIC_DBTxFullAl
2010:EFaultId_OIC_EBFullAl
2011:EFaultId_OIC_MCUBFullAl
2014:EFaultId_Muksu_SFCRCompDevAl
2016:EFaultId_Muksu_SMTimeOffAl
2017:EFaultId_Muksu_SRx10b8bAl
2019:EFaultId_Muksu_SsubMmAl
2048:EFaultId_Casa2Rp1CrcAl
2049:EFaultId_Casa2Rp1FramePhaseAl
2054:EFaultId_MuksuRxClkErrorAl
2056:EFaultId_SwMismatchAl
2057:EFaultId_MuksuMsgInWrongSlotAl
2058:EFaultId_MuksuMsgRoutingFailedAl
2059:EFaultId_MuksuSummingNotEnabledAl
2060:EFaultId_MuksuTransmissionRuleCollisionAI
2061:EFaultId_MuksuOverloadCollisionAl
3000:EFaultId_SystemModuleFailure
3003:EFaultId_FbiaFailureAl
3010:EFaultId_RfModuleFailure
3050:EFaultId_FanFailure
3070:EFaultId_ConfigurationError
3080:EFaultId_BtsReferenceClockMissing
4000:EFaultId_IncoherencyInConfiguration
4001:EFaultId_BtsResetNeededAl
4003:EFaultId_TxFailureTurnMimoOffAl
4008:EFaultId_PowerLevelNotSupportedAl
4011:EFaultId_GPSSystemElementAl
4015:EFaultId_Srio_ConfFailedAl
4019:EFaultId_KeepAliveStatusErrorAl
4025:EFaultId_MtuConfigurationFailureAl
4026:EFaultId_TogglingAl
4030:EFaultId_NoCommDataAl
4036:EFaultId_InvalidConfigurationFileAl
4038:EFaultId_RadioMasterConflictAl
4040:EFaultId_InitFaultManAl
4043:EFaultId_TuningFrequencyOutOfRangeAl
4044:EFaultId_IncoherencyCellConfigurationAl
4045:EFaultId_AntennaLineFaultyAl
4046:EFaultId_AntennaLineDegradedAl
4069:EFaultId_Rs485PowerFailureAl
4071:EFaultId_SysDangerouslyOverheatAl
4072:EFaultId_ParallelLinkDifferenceTooLargeAl
4073:EFaultId_FanVendorNotDetectedAl
4076:EFaultId_DistributedSiteSupportNotEnabledAl
4077:EFaultId_FspOverheatingAl
4078:EFaultId_FanBrokenAl
4079:EFaultId_CoolingFanSpeedDecreasedAl
4080:EFaultId_FanOverSpeedAl
4082:EfaultId_FallbackDueToMaxResetLoopCounterValueAl
4083:EFaultId_FallbackDueToConfigurationDataMigrationFailureAl
4085:EfaultId_FallbackDueToTransportRequestAl
4088:EFaultId_FileSystemAccessFailedAl
4090:EFaultId_TxCarrierInputPowerLowAl
4091:EFaultId_BtsResetTimeIncreasedAl
4092:EFaultId_MurkkuDefaultInitFailedAl
4110:EFaultId_PeerSystemModuleConnectionLostAl
4114:EFaultId_SynchronizationMasterMissingAl
4122:EFaultId_GpsReceiverNotTrackingSatellitesAl
4123:EFaultId_GpsReceiverSurveyInProgressAl
4124:EFaultId_GpsReceiverNoStoredPositionAl
4125:EFaultId_GpsReceiverPositionQuestionableAl
4126:EFaultId_GpsReceiverEepromInvalidAl
4141:EFaultId_DcVoltageAdministrativelyDisabledAl
4142:EFaultId_Communication3gppAdministrativelyDisabledAl
4145:EFaultId_SignatureValidationFailedAl
4153:EFaultId_PpsRefClcMissInStrtAl
4180:EFaultId_OperationOnSharedOpticalPortFailedAl
4203:EFaultId_RtpmConnectionFaultAl
4208:EFaultId_RromIpConfigAl
4210:EFaultId_ExtGpsInHoldoverAl
6112:EFaultId_PhichPowerBoostAl
6117:EFaultId_HighInterferenceToUlSubframeAl
6150:EFaultId_GtpuPathFailure
6202:EFaultId_S1SctpEndpointAl
6203:EFaultId_X2SctpEndpointAl
6204:EFaultId_S1SctpPathAl
6252:EFaultId_FailureInNetworkPlanFile
6253:EFaultId_CellSetupFailed
6257:EFaultId_CellReconfigurationFailed
6261:EFaultId_TraceConnectionFaultyAl
6262:EFaultId_InvalidVendorSpecificFile
6263:EFaultId_TraceSessionAl
6264:EFaultId_S1ZeroCapPlmns
6265:EFaultId_MaximumNumberOfNeighbourEnbsOrCellsExceeded
6268:EfaultId_MaximumNumberOfWcdmaNbCellsAI
6269:EfaultId_MaximumNumberOfWcdmaNbRelsAI
6270:EfaultId_MaximumNumberOfWcdmaNbRelsPerCellAndCarrierAl
6274:EFaultId_NeighborCellAmbiguityDetected
6277:EFaultId_AutomaticCellRecoveryNotPossible
6278:EFaultId_MfbiCellConfigurationConflict
6279:EFaultId_PciConfusionDetectedAl
6280:EFaultId_PhaseSynchronizationErrorAl
6303:EFaultId_X2ResetRetryOut
6304:EFaultId_X2SetupRetryOut
6308:EFaultId_S1SetupRetryOut
6317:EFaultId_S1ResetRetryOut
6320:EFaultId_CellS1UnavailabilityAl
6321:EFaultId_S1EnbConfigurationUpdate
6322:EFaultId_RimInterfaceTimeout
6323:EFaultId_RimInterfaceError
6351:EFaultId_SystemInfoValueTagHandlingFailed
6450:EFaultId_TechnicalLogUploadRecommended
6502:EFaultId_HighMemoryConsumptionAl
6701:EFaultId_CriticalBitTogglingError
6706:EFaultId_DspPlatformFatalErrAl
6707:EFaultId_DspApplicationFatalErrAl
6708:EFaultId_ExternallyTriggeredDspFatalErrAl
61006:FTM_RESET
61010:FTM_BTS_RESET_REQUIRED
61022:BFD DOWN
61028:FTM_LOF
61029:FTM_LOS
61030:FTM_DPD
61050:FTM_SFP
61058:FTM_SYNC_LOSS
61059:FTM_TIMING_SOURCE_LOS
61074:CRL Update failure
61075:Link OAM loopback alarm
61076:Link OAM link lost alarm
61077:Link OAM critical link event alarm
61079:SFP HW Failure
61104:FTM_EBER
61150:FTM_LOMF
61151:FTM_AIS
61152:FTM_RDI
61201:TRANSPORT_MODULE_MISSING
61410:Ethernet OAM CCM fault
61411:Ethernet OAM ETH_AIS_fault
61500:FTM_SECURITY
61510:NO_CERTIFICATE
61605:BFD DOWN Ingress
61606:BFD DOWN Egress
61607:AUTO NEGO MIS MATCH
61610:RTT_THRESHOLD_CROSSED
61611:PLR_THRESHOLD_CROSSED
61613:NTP_SERVER_UNREACHABLE
61616:VENDOR_CERTIFICATE_EXPIRING
61618:TRUST_ANCHOR_EXPIRING
61619:FTM_FAULT_TOGGLING
61623:SSM_TIMEOUT
61624:SSM_POORQUALITY
61631:TOP_MASTER_UNUSABLE
61632:IPV6_DUPLICATE_ADDRESS_DETECTED
61634:UNSUPPORTED_HW_DEVICE
61639:IPSEC_EMERGENCY_BYPASS_ACTIVE
61641:IP_TRAFFIC_CAPTURE_ONGOING
61643:IPsec_tunnel_switchover
1857:EFaultId_IncoherencyWithRFModulesAl
4097:EFaultId_BtsConfNotSupportedAl
4198:EFaultId_UnitAutonomousResetDelayedOrAbandonedAl
6259:EFaultId_AntennaCarrierMessageFailed
0:EFaultId_ChangeFanAl
1:EFaultId_FanPowerAl
30:EFaultId_SwUpdateAl
4081:EFaultId_MurkkuReleaseFromResetFailedAl
6267:EFaultId_CellActivationFailedAl
1820:EFaultId_OcxoPulseMissingAl
1831:EFaultId_ActiveClkTuningAl
1856:EFaultId_IncoherencyInCellConfigurationAl
1866:EFaultId_RulesMissingAl
1867:EFaultId_RulesParsingAl
1896:EFaultId_RnwParameterMismatchAl
1930:EFaultId_FRLossOfSecondaryOptIf
2008:EFaultId_OIC_CBRxFullAl
2009:EFaultId_OIC_CBTxFullAl
3020:EFaultId_BaseBandBusFailure
3030:EFaultId_FailureInOptical_Rp3Interface
3040:EFaultId_TemperatureAlarm
3060: EFaultId_CommissioningError
3090:EFaultId_BtsInternalSwManagementProblem
3100:EFaultId_AntennaLineFailure
3120: EFaultId_MastHeadAmplifierFault
3511:EFaultId_NoConnectionToFtAl
4009:EFaultId_RnwParameterMissingAl
4010:EFaultId_PLLStatusNotLockedAl
4029:EFaultId_SwCorruptedPermanentAl
4039:EFaultId_Rp301LinkConflictAl
4057:EfaultId_RfSwitchedOffAl
4064:EFaultId_MissingRp301LinkAl
4068:EFaultId_FspResetAl
4102:EFaultId_BootConfigurationInconsistencyAl
4107:EFaultId_RfPowerSwitchedOffFromBtsSmAl
4144:EFaultId_IpAddressConflict
4152:EFaultId_PowerLevelNotSuitableAl
4161:EFaultId_LossOfPrimaryOptIfAl
Fault Name
Unit temperature is high
Unit SW download failed
Difference between BTS master clock and reference frequency
No connection to unit
Baseband resources mapping to cells failure
Unit synchronization failed
Incompatible SW version detected
Obsolete SW version detected
BTS time not corrected
Error in file server during file download
File corrupted in SW download
BTS SW download or activation failed
Unit blocked
Cell blocked
BTS blocked
# autonomous reset as recovery action
POST test failed
Unknown HW resource
Unit not supported by current BTS SW version
Flash operation failure
Flash operation failure
Flash operation failure
Flash operation failure
Flash operation failure
Fault between FSM and FSP because of the lack of RP1 clock
Fatal OSE Error
Antenna link is down
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
BTS file error
Communication failure
Invalid frequency channel for the BTS HW
Baseband bus configuration of <x> was rejected
Not able to synchronize baseband bus with <x>
Transmission clock missing
Oven oscillator heating failure
BTS master clock tuning failure
Oven oscillator clock missing
Transmission parameters missing
Starting temperature below minimum
Mast Head Amplifier fault above current window, <line>
Mast Head Amplifier fault below current window, <line>
Antenna line failure
VSWR major alarm
VSWR minor alarm
Low noise amplifier failure
Filter tuning failure
Filter unit faulty
RET Antenna control failure
RET Antenna control failure
RET Antenna control failure
RET Antenna control failure
RET Antenna control failure
Antenna line device HW failure
Antenna line device missing software
SW corrupted
Faulty configuration of system modules
Heating element not working
BTS configuration error (not enough HW for LCR)
MHA operation degraded
MHA operation failure
Antenna Line Device Operation Failure
Antenna Line Device Operation Failure
Antenna Line Device Operation Failure
Antenna Line Device Operation Failure
SRAM operation failure
SRAM operation failure
PPS reference missing
2M external reference missing
RF Module configuring failed
RF Module critical file not found
RF Module file not found
Frame clock missing
RF BB bus synchronization error
RF BB bus configuration error
RF BB bus connection transmission error
TX out of order
RF Module gain adjusting failure
RF Module filter input power missing
RX out of order
RF Module out of order
RF Module power supply output faulty
No feedback signal
Transmission quality deteriorated
Temperature too low (Heating ongoing)
Unit unidentified
Configuration file corrupted
Post test failed
Module Clock faulty
RF Power decreased
FPGA SW update failed
RF Module blocked
No module fan detected
Cooling fan broken: <X>
Cooling fan has reduced from the set speed
Cooling fan is over speeding
Unit (module) temperature is high
Unit (module) dangerously overheating
Pipe dangerously overheating
Increased BER detected on the optical connection to Radio Module
Critical BER detected on the optical connection to Radio Module
Antenna line switched off
RP3 routing collisions are detected on FR module
Optical Interface faulty
Optical Interface faulty
Receiving failure in Optical Interface
10b8b coding error in optical interface device <opt link/RP3>
Synchronization failure in Optical Interface <opt link/RP3 link>
Optical Interface Data/Control/Ethernet Buffer Full
Optical Interface Data/Control/Ethernet Buffer Full
Optical Interface Data/Control/Ethernet Buffer Full
OIC MCU Buffer Full
Frame clock deviation fault
BB bus reception error (summing device)
BB bus transmission error
Address mismatch in summing
Synchronization error in RP1 receiver
Synchronization error in RP1 receiver
Buffer over/underflow in clock crossing logic
Firmware SW mismatch
BB bus message in the wrong slot
Message routing problem in receiver (RX)
Summing not enabled for message type
Transmission rule collision in Muksu
Overload collision in transmitter
System Module failure
Failure in replaceable baseband unit
RF Module failure
Fan failure
Configuration error: <x>
BTS reference clock missing
Incoherence in cell configuration
BTS reset required
TX failure in MIMO
Power level not supported
GPS Receiver alarm: control interface not available
SRIO chain configuration was rejected
Master unit has lost connection to the slave unit
Internal MTU configuration failure
Toggling: <Fault name>
BTS is uncommissioned
Invalid configuration file
Radio master conflict
Unit initialization failure
Tuning frequency out of range
Incoherency in cell configuration
Antenna line faulty
Antenna line operation degraded
RS485 IUANT port failure
Module dangerously overheating
Parallel RP3-01 link length mismatch
Fan vendor not detected
Distributed site support not enabled
FSP overheating
Cooling fan broken
Cooling fan speed decreased
Cooling fan is over speeding
SW fallback
SW fallback
SW fallback
File System access failed
Cell power failure
BTS reset time increased
Summing service default initialization failed
Peer system module connection lost
Synchronization master missing
GPS receiver alarm: not tracking satellites
GPS receiver alarm: survey in progress
GPS receiver alarm: no stored position
GPS receiver alarm: position questionable
GPS receiver alarm: EEPROM invalid
DC voltage administratively disabled
3GPP/AISG communication administratively disabled
Validation of signed file failed
Reference clock missing in startup
Operation on shared optical port failed
Failure in connection to Real-time PM Collection Entity
Unit initialization failure
External GPS receiver in holdover
Phich Power Boost not applied
High interference to UL subframe
GTP-U Path Failure
Transport layer connection failure in S1 interface
Transport layer connection failure in X2 interface
S1 SCTP path failure
Incorrect radio network parameters
Cell configuration data distribution failed
Cell reconfiguration data distribution failed
Failure in connection between BTS and iOMS or 3rd party tool
BTS vendor-specific file fault
Failure in trace session
No MME capacity assigned by Core Network
Maximum number of neighbor eNBs/cells exceeded
Maximum number of WCDMA neighbor cells is exceeded
Maximum number of WCDMA neighbor relations is exceeded
Maximum number of WCDMA neighbor relations per cell and carrier is exceeded
Neighbor cell ambiguity detected
Automatic cell recovery not possible
MFBI cell configuration conflict
PCI confusion detected
Phase error exceeds 5 us limit
X2 interface recovery failure
X2 interface setup failure
S1 interface setup failure
S1 interface recovery failure
Cell lost S1 availability
S1 eNB configuration update
RIM interface timeout
RIM interface error
System information broadcast parameters overflow
Diagnostic Files collected
High memory consumption
Critical bit toggling error
DSP platform fatal error
DSP application fatal error
Externally triggered DSP fatal error
BTS booted at $date due to $RCause
BTS reset required
BFD group $bfdGrpId down
LOF on unit $U, interface $IF
LOS on unit $U, [Ethernet] interface $IF
Dead Peer Detected
Missing or non-compliant SFP module on unit $U, interface $I
Synchronization lost
$Protocol Timing source lost [on unit $U] [, interface $IF]
CRL update failure
Link OAM loopback inserted on unit $U, interface $F by $P peer
Link OAM link lost on unit $U, interface $F
Link OAM critical link event $E on unit $U, interface $F
SFP HW Failure
EBER on unit $U, interface $IF
LOMF on slot $U, interface $IF
AIS on unit $U, interface $IF
RDI on unit $U, interface $IF
Transport module missing: $unit
CCM fault level $ prio $p cause $c
ETH AIS fault interface $IF level $l mac $x
Five failed logins to FTM due to wrong user name or password.
Automatic BTS Operator Certificate retrieval unsuccessful
BFD $session down, ingress, $sourceIP to $destinationIP
BFD $session down, egress, $sourceIP to $destinationIP
Auto-negotiation mismatch, on unit $U, Ethernet interface $IF
TWAMP RTT Threshold Crossed
TWAMP PLR Threshold Crossed
NTP server is not accessible
Vendor BTS certificate is about to expire
BTS and/or peer trust anchor expired or due to expire
FTM Toggling <Fault name>
SyncE SSM Timed Out on unit $UID, interface $IF
SyncE Quality Level Degraded on unit $UID, interface $IF
ToP master service $IP unusable
Dup Addr on {duplicateIpv6Address} {VID: id}
Unsupported HW device
IPsec emergency bypass active
IP Traffic Capturing Ongoing [port $port,] [mac $m]
IPsec tunnel switchover
Incoherency with RF Modules
BTS configuration not supported
Notification about autonomous recovery reset delayed or abandoned
Antenna Carrier configuration failure
Fan module operation degraded: <X>
Fan module faulty: <X>
BTS SW download or activation failed
Summing service release from reset failed
Failure during cell activation
Oven oscillator Missing Pulse
Active clock tuning fault
Incoherency in cell configuration
Fault diagnostics rule file error
Fault diagnostics rule file error
RNW parameter mismatch
RF loss of secondary optical interface
Optical Interface Data/Control/Ethernet Buffer Full
Optical Interface Data/Control/Ethernet Buffer Full
Baseband bus failure
Failure in optical RP3 interface
Temperature alarm
Commissioning error: <x>
BTS internal SW management problem
Antenna Line Device failure
Mast Head Amplifier fault
No connection to Flexi transport submodule
Missing RNW parameter
PLL status not locked
SW corrupted
RP3-01 link conflict
Radio resources switched off
Missing RP3-01 link
FSP in resetting state
Boot configuration inconsistency detected
Power on #smodLogicalId #pwrLineId line switched off remotely by user
IP address conflict
Power level not supported for cells using the same radio module
Loss of primary Opt IF
Fault Name in issue 01
Unit temperature is high
Unit SW download failed
Difference between BTS master clock and reference frequency
No connection to unit
Baseband resources mapping to cells failure
Unit synchronization failed
Incompatible SW version detected
Obsolete SW version detected
BTS time not corrected
Error in file server during file download
File corrupted in SW download
BTS SW download or activation failed
Unit blocked
Cell blocked
BTS blocked
# autonomous reset as recovery action
POST test failed
Unknown HW resource
Unit not supported by current BTS SW version
Flash operation failure
Flash operation failure
Flash operation failure
Flash operation failure
Flash operation failure
Fault between FSM and FSP because of the lack of RP1 clock
Fatal OSE Error
Antenna link is down
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
BTS file error
Communication failure
Invalid frequency channel for the BTS HW
Baseband bus configuration of <x> was rejected
Not able to synchronize baseband bus with <x>
Transmission clock missing
Oven oscillator heating failure
BTS master clock tuning failure
Oven oscillator clock missing
Transmission parameters missing
Starting temperature below minimum
Mast Head Amplifier fault above current window, <line>
Mast Head Amplifier fault below current window, <line>
Antenna line failure
VSWR major alarm
VSWR minor alarm
Low noise amplifier failure
Filter tuning failure
Filter unit faulty
RET Antenna control failure
RET Antenna control failure
RET Antenna control failure
RET Antenna control failure
RET Antenna control failure
Antenna line device HW failure
Antenna line device missing software
SW corrupted
Faulty configuration of system modules
Heating element not working
BTS configuration error (not enough HW for LCR)
MHA operation degraded
MHA operation failure
Antenna Line Device Operation Failure
Antenna Line Device Operation Failure
Antenna Line Device Operation Failure
Antenna Line Device Operation Failure
SRAM operation failure
SRAM operation failure
PPS reference missing
2M external reference missing
RF Module configuring failed
RF Module critical file not found
RF Module file not found
Frame clock missing
RF BB bus synchronization error
RF BB bus configuration error
RF BB bus connection transmission error
TX out of order
RF Module gain adjusting failure
RF Module filter input power missing
RX out of order
RF Module out of order
RF Module power supply output faulty
No feedback signal
Transmission quality deteriorated
Temperature too low (Heating ongoing)
Unit unidentified
Configuration file corrupted
Post test failed
Module Clock faulty
RF Power decreased
FPGA SW update failed
RF Module blocked
No module fan detected
Cooling fan broken: <X>
Cooling fan has reduced from the set speed
Cooling fan is over speeding
Unit (module) temperature is high
Unit (module) dangerously overheating
Pipe dangerously overheating
Increased BER detected on the optical connection to Radio Module
Critical BER detected on the optical connection to Radio Module
Antenna line switched off
RP3 routing collisions are detected on FR module
Optical Interface faulty
Optical Interface faulty
Receiving failure in Optical Interface
10b8b coding error in optical interface device <opt link/RP3>
Synchronization failure in Optical Interface <opt link/RP3 link>
Optical Interface Data/Control/Ethernet Buffer Full
Optical Interface Data/Control/Ethernet Buffer Full
Optical Interface Data/Control/Ethernet Buffer Full
OIC MCU Buffer Full
Frame clock deviation fault
BB bus reception error (summing device)
BB bus transmission error
Address mismatch in summing
Synchronization error in RP1 receiver
Synchronization error in RP1 receiver
Buffer over/underflow in clock crossing logic
Firmware SW mismatch
BB bus message in the wrong slot
Message routing problem in receiver (RX)
Summing not enabled for message type
Transmission rule collision in Muksu
Overload collision in transmitter
System Module failure
Failure in replaceable baseband unit
RF Module failure
Fan failure
Configuration error: <x>
BTS reference clock missing
Incoherence in cell configuration
BTS reset required
TX failure in MIMO
Power level not supported
GPS Receiver alarm: control interface not available
SRIO chain configuration was rejected
Master unit has lost connection to the slave unit
Internal MTU configuration failure
Toggling: <Fault name>
BTS is uncommissioned
Invalid configuration file
Radio master conflict
Unit initialization failure
Tuning frequency out of range
Incoherency in cell configuration
Antenna line faulty
Antenna line operation degraded
RS485 IUANT port failure
Module dangerously overheating
Parallel RP3-01 link length mismatch
Fan vendor not detected
Distributed site support not enabled
FSP overheating
Cooling fan broken
Cooling fan speed decreased
Cooling fan is over speeding
SW fallback
SW fallback
SW fallback
File System access failed
Cell power failure
BTS reset time increased
Summing service default initialization failed
Peer system module connection lost
Synchronization master missing
GPS receiver alarm: not tracking satellites
GPS receiver alarm: survey in progress
GPS receiver alarm: no stored position
GPS receiver alarm: position questionable
GPS receiver alarm: EEPROM invalid
DC voltage administratively disabled
3GPP/AISG communication administratively disabled
Validation of signed file failed
Reference clock missing in startup
Operation on shared optical port failed
Failure in connection to Real-time PM Collection Entity
Unit initialization failure
External GPS receiver in holdover
Phich Power Boost not applied
High interference to UL subframe
GTP-U Path Failure
Transport layer connection failure in S1 interface
Transport layer connection failure in X2 interface
S1 SCTP path failure
Incorrect radio network parameters
Cell configuration data distribution failed
Cell reconfiguration data distribution failed
Failure in connection between BTS and iOMS or 3rd party tool
BTS vendor-specific file fault
Failure in trace session
No MME capacity assigned by Core Network
Maximum number of neighbor eNBs/cells exceeded
Maximum number of WCDMA neighbor cells is exceeded
Maximum number of WCDMA neighbor relations is exceeded
Maximum number of WCDMA neighbor relations per cell and carrier is exceeded
Neighbor cell ambiguity detected
Automatic cell recovery not possible
MFBI cell configuration conflict
PCI confusion detected
Phase error exceeds 5 us limit
X2 interface recovery failure
X2 interface setup failure
S1 interface setup failure
S1 interface recovery failure
Cell lost S1 availability
S1 eNB configuration update
RIM interface timeout
RIM interface error
System information broadcast parameters overflow
Diagnostic Files collected
High memory consumption
Critical bit toggling error
DSP platform fatal error
DSP application fatal error
Externally triggered DSP fatal error
BTS booted at $date due to $RCause
BTS reset required
BFD group $bfdGrpId down
LOF on unit $U, interface $IF
LOS on unit $U, [Ethernet] interface $IF
Dead Peer Detected
Missing or non-compliant SFP module on unit $U, interface $I
Synchronization lost
$Protocol Timing source lost [on unit $U] [, interface $IF]
CRL update failure
Link OAM loopback inserted on unit $U, interface $F by $P peer
Link OAM link lost on unit $U, interface $F
Link OAM critical link event $E on unit $U, interface $F
SFP HW Failure
EBER on unit $U, interface $IF
LOMF on slot $U, interface $IF
AIS on unit $U, interface $IF
RDI on unit $U, interface $IF
Transport module missing: $unit
CCM fault level $ prio $p cause $c
ETH AIS fault interface $IF level $l mac $x
Five failed logins to FTM due to wrong user name or password
Automatic BTS Operator Certificate retrieval unsuccessful
BFD $session down, ingress, $sourceIP to $destinationIP
BFD $session down, egress, $sourceIP to $destinationIP
Auto-negotiation mismatch, on unit $U, Ethernet interface $IF
TWAMP RTT Threshold Crossed
TWAMP PLR Threshold Crossed
NTP server is not accessible
Vendor BTS certificate is about to expire
BTS and/or peer trust anchor expired or due to expire
FTM Toggling <Fault name>
SyncE SSM Timed Out on unit $UID, interface $IF
SyncE Quality Level Degraded on unit $UID, interface $IF
ToP master service $IP unusable
Dup Addr on {duplicateIpv6Address} {VID: id}
Unsupported HW device
IPsec emergency bypass active
IP Traffic Capturing Ongoing [port $port,] [mac $m]
IPsec tunnel switchover
Fault Name in release RL60 Used in Product
Unit temperature is high Base Station
Unit SW download failed Base Station
Difference between BTS master clock and reference frequency Base Station
No connection to unit Base Station
Unit initialization failure Base Station
Unit synchronization failed Base Station
Incompatible SW version detected Base Station
Incompatible SW version detected Base Station
BTS time not corrected Base Station
Base Station
File corrupted in SW download Base Station
Base Station
Unit blocked Base Station
Cell blocked Base Station
BTS blocked Base Station
Base Station
POST test failed Base Station
Unknown HW resource Base Station
Unit not supported by current BTS SW version Base Station
Flash operation failure Base Station
Flash operation failure Base Station
Flash operation failure Base Station
Flash operation failure Base Station
Flash operation failure Base Station
Fault between FSM and FSP because of the lack of RP1 clock Base Station
Fatal OSE Error Base Station
Antenna link is down Base Station
[User defined] Base Station
[User defined] Base Station
[User defined] Base Station
[User defined] Base Station
[User defined] Base Station
[User defined] Base Station
[User defined] Base Station
[User defined] Base Station
[User defined] Base Station
[User defined] Base Station
[User defined] Base Station
[User defined] Base Station
[User defined] Base Station
[User defined] Base Station
[User defined] Base Station
[User defined] Base Station
[User defined] Base Station
[User defined] Base Station
[User defined] Base Station
[User defined] Base Station
[User defined] Base Station
[User defined] Base Station
[User defined] Base Station
[User defined] Base Station
[User defined] Base Station
[User defined] Base Station
BTS file error Base Station
Communication failure Base Station
Invalid frequency channel for the BTS HW Base Station
Baseband bus configuration of <x> was rejected Base Station
Not able to synchronize baseband bus with <x> Base Station
Base Station
Oven oscillator heating failure Base Station
BTS master clock tuning failure Base Station
Oven oscillator clock missing Base Station
Transmission parameters missing Base Station
Starting temperature below minimum Base Station
Mast Head Amplifier fault above current window, <line> Base Station
Mast Head Amplifier fault below current window, <line> Base Station
Antenna line failure Base Station
VSWR major alarm Base Station
VSWR minor alarm Base Station
Low noise amplifier failure Base Station
Base Station
Base Station
RET Antenna control failure Base Station
RET Antenna control failure Base Station
RET Antenna control failure Base Station
RET Antenna control failure Base Station
RET Antenna control failure Base Station
Antenna line device HW failure Base Station
Base Station
SW corrupted Base Station
Faulty configuration of system modules Base Station
Heating element not working Base Station
BTS config error (not enough HW for LCR) Base Station
Base Station
MHA unit operation failure Base Station
Antenna Line Device Operation Failure Base Station
Antenna Line Device Operation Failure Base Station
Antenna Line Device Operation Failure Base Station
Antenna Line Device Operation Failure Base Station
SRAM operation failure Base Station
SRAM operation failure Base Station
Base Station
2M external reference missing Base Station
RF Module configuring failed Base Station
RF Module critical file not found Base Station
RF Module file not found Base Station
Frame clock missing Base Station
RF BB bus synchronization error Base Station
RF BB bus configuration error Base Station
RF BB bus connection transmission error Base Station
TX out of order Base Station
RF Module gain adjusting failure Base Station
RF Module filter input power missing Base Station
RX out of order Base Station
RF Module out of order Base Station
RF Module power output faulty Base Station
No feedback signal Base Station
Transmission quality deteriorated Base Station
Temperature too low (Heating ongoing) Base Station
Unit unidentified Base Station
Configuration file corrupted Base Station
Post test failed Base Station
Module Clock faulty Base Station
RF Power decreased Base Station
FPGA SW update failed Base Station
RF Module blocked Base Station
No module fan detected Base Station
Cooling fan broken: <X> Base Station
Cooling fan has reduced from the set speed Base Station
Cooling fan is over speeding Base Station
Unit (module) temperature is high Base Station
Unit (module) dangerously overheating Base Station
Pipe dangerously overheating Base Station
Increased BER detected on the optical connection to Radio Module Base Station
Critical BER detected on the optical connection to Radio Module Base Station
Antenna line switched off Base Station
RP3 routing collisions are detected on FR module Base Station
Optical Interface faulty Base Station
Optical Interface faulty Base Station
Receiving failure in Optical Interface Base Station
10b8b coding error in optical interface device <opt link/RP3> Base Station
Synchronization failure in Optical Interface <opt link/RP3 link> Base Station
#N/A Base Station
Optical Interface Data/Control/Ethernet Buffer Full Base Station
Optical Interface Data/Control/Ethernet Buffer Full Base Station
OIC MCU Buffer Full Base Station
Frame clock deviation fault Base Station
BB bus reception error (summing device) Base Station
BB bus transmission error Base Station
Address mismatch in summing Base Station
Synchronization error in RP1 receiver Base Station
Synchronization error in RP1 receiver Base Station
Buffer over/underflow in clock crossing logic Base Station
Firmware SW mismatch Base Station
BB bus message in the wrong slot Base Station
Message routing problem in receiver (RX) Base Station
Summing not enabled for message type Base Station
Transmission rule collision in Muksu Base Station
Overload collision in transmitter Base Station
System Module failure Base Station
Failure in replaceable baseband unit Base Station
Base Station
Base Station
Base Station
BTS reference clock missing Base Station
Incoherency in cell configuration Base Station
BTS reset required Base Station
TX failure in MIMO Base Station
Power level not supported Base Station
GPS Receiver alarm: control interface not available Base Station
SRIO chain configuration was rejected Base Station
Master unit has lost connection to the slave unit Base Station
Internal MTU configuration failure Base Station
Toggling: <Fault name> Base Station
BTS is uncommissioned Base Station
Invalid configuration file Base Station
Radio master conflict Base Station
Base Station
Filter unit operation failed Base Station
Base Station
Antenna line faulty Base Station
Antenna line operation degraded Base Station
RS485 IUANT port failure Base Station
Module dangerously overheating Base Station
Parallel RP3-01 link length mismatch Base Station
Fan vendor not detected Base Station
Distributed site support not enabled Base Station
FSP overheating Base Station
Cooling fan broken Base Station
Cooling fan speed decreased Base Station
Cooling fan is over speeding Base Station
SW fallback Base Station
SW fallback Base Station
SW fallback Base Station
File System access failed Base Station
Cell power failure Base Station
BTS reset time increased Base Station
Summing service default initialization failed Base Station
Peer system module connection lost Base Station
Synchronization master missing Base Station
GPS receiver alarm: not tracking satellites Base Station
GPS receiver alarm: survey in progress Base Station
GPS receiver alarm: no stored position Base Station
GPS receiver alarm: position questionable Base Station
GPS receiver alarm: EEPROM invalid Base Station
DC voltage administratively disabled Base Station
3GPP/AISG communication administratively disabled Base Station
Validation of signed file failed Base Station
Base Station
#N/A Base Station
#N/A Base Station
Unit initialization failure Base Station
#N/A Base Station
Phich Power Boost not applied Base Station
#N/A Base Station
GTP-U Path Failure Base Station
Transport layer connection failure in S1 interface Base Station
Transport layer connection failure in X2 interface Base Station
S1 SCTP path failure Base Station
Incorrect radio network parameters Base Station
Cell configuration data distribution failed Base Station
Cell reconfiguration data distribution failed Base Station
Failure in connection between BTS and iOMS or 3rd party tool Base Station
BTS vendor-specific file fault Base Station
Failure in trace session Base Station
No MME capacity assigned by Core Network Base Station
Maximum number of neighbor eNBs/cells exceeded Base Station
#N/A Base Station
#N/A Base Station
#N/A Base Station
Neighbor cell ambiguity detected Base Station
Automatic cell recovery not possible Base Station
MFBI cell configuration conflict Base Station
#N/A Base Station
#N/A Base Station
X2 interface recovery failure Base Station
X2 interface setup failure Base Station
S1 interface setup failure Base Station
S1 interface recovery failure Base Station
Cell lost S1 availability Base Station
S1 eNB configuration update Base Station
RIM interface timeout Base Station
RIM interface error Base Station
System information broadcast parameters overflow Base Station
Technical log buffer freezing Base Station
High memory consumption Base Station
Critical bit toggling error Base Station
#N/A Base Station
#N/A Base Station
#N/A Base Station
BTS booted at $date due to $RCause Base Station
BTS reset required Base Station
BFD group $bfdGrpId down Base Station
LOF on unit $U, interface $IF Base Station
LOS on unit $U, [Ethernet] interface $IF Base Station
Dead Peer Detected Base Station
Missing or non-compliant SFP module on unit $U, interface $I Base Station
Synchronization lost Base Station
$Protocol Timing source lost [on unit $U] [, interface $IF] Base Station
CRL update failure Base Station
Link OAM loopback inserted on unit $U, interface $F by $P peer Base Station
Link OAM link lost on unit $U, interface $F Base Station
Link OAM critical link event $E on unit $U, interface $F Base Station
SFP HW Failure Base Station
EBER on unit $U, interface $IF Base Station
LOMF on slot $U, interface $IF Base Station
AIS on unit $U, interface $IF Base Station
RDI on unit $U, interface $IF Base Station
Transport module missing: $unit Base Station
CCM fault level $ prio $p cause $c Base Station
ETH AIS fault interface $IF level $l mac $x Base Station
Five failed logins to FTM due to wrong user name or password Base Station
Automatic BTS Operator Certificate retrieval unsuccessful Base Station
BFD $session down, ingress, $sourceIP to $destinationIP Base Station
BFD $session down, egress, $sourceIP to $destinationIP Base Station
Auto-negotiation mismatch, on unit $U, Ethernet interface $IF Base Station
TWAMP RTT Threshold Crossed Base Station
TWAMP PLR Threshold Crossed Base Station
NTP server is not accessible Base Station
Vendor BTS certificate due to expire Base Station
BTS and/or peer trust anchor expired or due to expire Base Station
FTM Toggling <Fault name> Base Station
SyncE SSM Timed Out on unit $UID, interface $IF Base Station
SyncE Quality Level Degraded on unit $UID, interface $IF Base Station
ToP master service $IP unusable Base Station
Dup Addr on {duplicateIpv6Address} {VID: id} Base Station
Unsupported HW device Base Station
IPsec emergency bypass active Base Station
IP Traffic Capturing Ongoing [port $port,] [mac $m] Base Station
#N/A Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Base Station
Used in Product in issue 01 Used in Product in release RL60
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station
Base Station Base Station
Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station
Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station #N/A
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station
Base Station
Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station
Base Station Base Station
Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station
Base Station #N/A
Base Station #N/A
Base Station Base Station
Base Station #N/A
Base Station Base Station
Base Station #N/A
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station #N/A
Base Station #N/A
Base Station #N/A
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station #N/A
Base Station #N/A
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station #N/A
Base Station #N/A
Base Station #N/A
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station Base Station
Base Station #N/A
Detecting Unit
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM, FCT
FCM, FCT
FCM
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM, FCT
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT, FTM; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FSP, FBB
Flexi BTS FDD, Flexi BTS TDD: FSP, FBB; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FSP, FBB; Flexi Zone Micro: Flexi Zone Micro BTS
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT, FSP, FBB; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT, FSP, FBB; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM
FR
FR
FR
Flexi BTS FDD, Flexi BTS TDD: FR; Flexi Zone Micro: Flexi Zone Micro BTS
FR
FR
FR
FR
RET
RET
RET
RET
RET
FR, RET, MHA
MHA, RET
FCM, FCT
FCM, FCT
FCM
FCM, FCT
MHA in AISG mode
MHA in AISG mode
FCM, FCT
FCM, FCT
FCM, FCT
FCM, FCT
Flexi BTS FDD: FCM; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD: FCM; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FR; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FR; Flexi Zone Micro: Flexi Zone Micro BTS
FR
FR
FR
FR
Flexi BTS FDD, Flexi BTS TDD: FR; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FR; Flexi Zone Micro: Flexi Zone Micro BTS
FR
Flexi BTS FDD, Flexi BTS TDD: FR; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FR; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FR; Flexi Zone Micro: Flexi Zone Micro BTS
FR
FR
FR
Flexi BTS FDD, Flexi BTS TDD: FR; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FR; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FR; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FR; Flexi Zone Micro: Flexi Zone Micro BTS
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FCM, FCT, FBB
FCM, FCT, FBB
FCM, FCT, FBB
FCM, FCT. FBB
FCM, FCT, FBB
FCM, FCT, FBB
FCM, FCT, FBB
FCM, FCT, FBB
FCM, FCT, FBB
FCM
FCM, FCT, FBB
FCM, FCT, FBB
FCM, FCT, FBB
FCM
FCM
FCM, FCT, FBB
Flexi BTS FDD, Flexi BTS TDD: FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM
FCM, FCT, FBB
FCM, FCT, FBB
FCM, FCT, FBB
FCM, FCT, FBB
Flexi BTS FDD, Flexi BTS TDD: FSM; Flexi Zone Micro: Flexi Zone Micro BTS
FCT, FBB
Flexi BTS FDD, Flexi BTS TDD: FSM, FR; Flexi Zone Micro: Flexi Zone Micro BTS
FSM, FR
Flexi BTS FDD, Flexi BTS TDD: FSM; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FSM; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FSM; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FR
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FR
FR
FR
FCM
FCM, FCT
FCM, FCT
FCM, FCT
FCT
FCM, FCT
FCM, FCT
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM, FCT
FCM, FCT
FCT, FBB
FCM, FCT
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM/FCT
FCM/FCT
FCM, FCT
FCM, FCT
FCM, FCT
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM, FCT
FBBC
Flexi BTS FDD,Flexi BTS TDD,Flexi Zone Micro FDD,Flexi Zone Micro TDD
Flexi BTS FDD, Flexi BTS TDD: FCM,FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FSP, FBB
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM, FCT
FCM, FCT
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro FDD, Flexi Zone Micro TDD: Flexi Zone Micro BTS
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: LNADJ; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD: FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FST; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM/FCT; Flexi Zone Micro: Flexi Zone Micro BTS; Flexi Zone: FZC, FZAP
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FSP; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FSP, FBB; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FSP, FBB; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FSP, FBB; Flexi Zone Micro: Flexi Zone Micro BTS
FTLB, FTIB, FSM, FTIF
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
FTLB, FTIB, FSM, FTIF
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF, FSIH; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
FTLB, FTIB, FSM, FTIF
FTLB, FTIB, FSM, FTIF
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FIIB, FILB, FSIB, FTIA, FTIB, FTLB, FTFB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
FTLB, FTIB, FSM, FTIF
FTLB, FTIB, FSM, FTIF
FTLB, FTIB, FSM, FTIF
FTLB, FTIB, FSM, FTIF
FSM, FTIF
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTIB, FTFB, FTLB, FSM, FSI, FTIF, FIIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTIB, FTFB, FTLB; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
FSM, FTIF
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FSM, FSI, FTIF, FIIF, FTLB, FTIB; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
FSM
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
FTLB, FTIB, FSM, FTIF, FSIH; Flexi Zone Micro BTS.
FCM,FCT
FCT
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM
FCM
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCT, FBB
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM, FCT
FSM
FCM
FCM [FSMr2] / FCT [FSMr3]
FCM [FSMr2] / FCT [FSMr3]
FCM / FCT
FRx/LTX
FCM, FCT
FCM, FCT
FSM, FR
FSM, FR
FSM, FR
FSM, FR
FSM
FSM, Antenna Line Device itself
FSM, FR
FSM
FSM
FCM
FCM/FCT
FCM
FCM, FCT
FCM
FCM/FCT
(FSMr2): FCM, (FSMr3): FCT
FCM, FCT
FCM, FCT
FCM, FCT
FCM/FCT
Detecting Unit in issue 01
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM, FCT
FCM, FCT
FCM
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS; Flexi Zone: Flexi Zone Access Point
FCM, FCT
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS; Flexi Zone: Flexi Zone Controller, Flexi Zo
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS; Flexi Zone: Flexi Zone Controller, Flexi Zo
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT, FTM; Flexi Zone Micro: Flexi Zone Micro BTS; Flexi Zone: Flexi Zone Access Point
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FSP, FBB
Flexi BTS FDD, Flexi BTS TDD: FSP, FBB; Flexi Zone Micro: Flexi Zone Micro BTS; Flexi Zone: Flexi Zone Access Point
Flexi BTS FDD, Flexi BTS TDD: FSP, FBB; Flexi Zone Micro: Flexi Zone Micro BTS
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT, FR
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD, Flexi Zone Micro FDD, Flexi Zone Micro TDD: FCM, FCT Flexi Zone: FZC, FZAP
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS; Flexi Zone: Flexi Zone Access Point
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT, FSP, FBB; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT, FSP; Flexi Zone Micro: Flexi Zone Micro BTS; Flexi Zone: Flexi Zone Access Point
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS; Flexi Zone: Flexi Zone Access Point
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS; Flexi Zone: Flexi Zone Access Point
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS; Flexi Zone: Flexi Zone Access Point
FCM
FR
FR
FR
Flexi BTS FDD, Flexi BTS TDD: FR; Flexi Zone Micro: Flexi Zone Micro BTS
FR
FR
FR
FR
RET
RET
RET
RET
RET
FR, RET, MHA
MHA, RET
FCM, FCT
FCM, FCT
FCM
FCM, FCT
MHA in AISG mode
MHA in AISG mode
FCM, FCT
FCM, FCT
FCM, FCT
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCM; Flexi Zone Micro: Flexi Zone Micro BTS; Flexi Zone: Flexi Zone Access Point
Flexi BTS FDD, Flexi BTS TDD: FCM; Flexi Zone Micro: Flexi Zone Micro BTS; Flexi Zone: Flexi Zone Access Point
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS; Flexi Zone: Flexi Zone Access Point
Flexi BTS FDD, Flexi BTS TDD: FR; Flexi Zone Micro: Flexi Zone Micro BTS; Flexi Zone: Flexi Zone Access Point
Flexi BTS FDD, Flexi BTS TDD: FR; Flexi Zone Micro: Flexi Zone Micro BTS; Flexi Zone: Flexi Zone Access Point
FR
FR
FR
FR
Flexi BTS FDD, Flexi BTS TDD: FR; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FR; Flexi Zone Micro: Flexi Zone Micro BTS
FR
Flexi BTS FDD, Flexi BTS TDD: FR; Flexi Zone Micro: Flexi Zone Micro BTS; Flexi Zone: Flexi Zone Access Point
Flexi BTS FDD, Flexi BTS TDD: FR; Flexi Zone Micro: Flexi Zone Micro BTS; Flexi Zone: Flexi Zone Access Point
Flexi BTS FDD, Flexi BTS TDD: FR; Flexi Zone Micro: Flexi Zone Micro BTS; Flexi Zone: Flexi Zone Access Point
FR
FR
FR
Flexi BTS FDD, Flexi BTS TDD: FR; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FR; Flexi Zone Micro: Flexi Zone Micro BTS; Flexi Zone: Flexi Zone Access Point
Flexi BTS FDD, Flexi BTS TDD: FR; Flexi Zone Micro: Flexi Zone Micro BTS; Flexi Zone: Flexi Zone Access Point
Flexi BTS FDD, Flexi BTS TDD: FR; Flexi Zone Micro: Flexi Zone Micro BTS; Flexi Zone: Flexi Zone Access Point
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FCM, FCT, FBB
FCM, FCT, FBB
FCM, FCT, FBB
FCM, FCT. FBB
FCM, FCT, FBB
FCM, FCT, FBB
FCM, FCT, FBB
FCM, FCT, FBB
FCM, FCT, FBB
FCM
FCM, FCT, FBB
FCM, FCT, FBB
FCM, FCT, FBB
FCM
FCM
FCM, FCT, FBB
Flexi BTS FDD, Flexi BTS TDD: FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM
FCM, FCT, FBB
FCM, FCT, FBB
FCM, FCT, FBB
FCM, FCT, FBB
Flexi BTS FDD, Flexi BTS TDD: FSM; Flexi Zone Micro: Flexi Zone Micro BTS
FCT, FBB
FSM, FR
FSM, FR
Flexi BTS FDD, Flexi BTS TDD: FSM; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FSM; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FSM; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FR
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FR
FR
FR
FCM
FCM, FCT
FCM, FCT
FCM, FCT
FCT
FCM, FCT
FCM, FCT
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS; Flexi Zone: Flexi Zone Access Point
FCM, FCT
FCM, FCT
FCT, FBB
FCM, FCT
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM/FCT
FCM/FCT
FCM, FCT
FCM, FCT
FCM, FCT
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM, FCT
FBBC
Flexi BTS FDD,Flexi BTS TDD,Flexi Zone Micro FDD,Flexi Zone Micro TDD
Flexi BTS FDD, Flexi BTS TDD: FCM,FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FSP, FBB
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
FCM, FCT
FCM, FCT
FCM, FCT
FCM, FCT
FCM, FCT
Flexi BTS FDD, Flexi BTS TDD: LNADJ; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD: FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FST; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM/FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FCM, FCT; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FSP; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FSP, FBB; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FSP, FBB; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FSP, FBB; Flexi Zone Micro: Flexi Zone Micro BTS
FTLB, FTIB, FSM, FTIF
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS; Flexi Zone: Flexi Zone Acces
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
FTLB, FTIB, FSM, FTIF
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS; Flexi Zone: Flexi Zone Acces
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF, FSIH; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
FTLB, FTIB, FSM, FTIF
FTLB, FTIB, FSM, FTIF
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FIIB, FILB, FSIB, FTIA, FTIB, FTLB, FTFB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
FTLB, FTIB, FSM, FTIF
FTLB, FTIB, FSM, FTIF
FTLB, FTIB, FSM, FTIF
FTLB, FTIB, FSM, FTIF
FSM, FTIF
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTIB, FTFB, FTLB, FSM, FSI, FTIF, FIIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTIB, FTFB, FTLB; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
FSM, FTIF
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FSM, FSI, FTIF, FIIF, FTLB, FTIB; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
FSM
Flexi BTS FDD, Flexi BTS TDD: FTLB, FTIB, FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS TDD: FSM, FTIF; Flexi Zone Micro: Flexi Zone Micro BTS
FTLB, FTIB, FSM, FTIF, FSIH; Flexi Zone Micro BTS.
Detecting Unit in release RL60 Source
FCM, FCT FCM, FCT, FSP, FTM, FBB_x000D_
FCM/FCT Flexi BTS FDD, Flexi BTS TDD:_x000D_
FCM -Flexi FCM_x000D_
BTS FDD:_x000D_
-- FCT_x000D_ FCM_x000D_
FCM/FCT --- FSP_x000D_ FSP_x000D_
-Flexi FCT_x000D_
FBB_x000D_
FCM/FCT -_x000D_ FBB_x000D_
BTS FDD, Flexi BTS TDD:_x000D_
-FCM_x000D_
-Flexi FTM_x000D_
DSP_x000D_
FCM/FCT FCM,
-FCT_x000D_ Zone
FCT, Micro
MHA_x000D_ FDD, Flexi Zone Micro
FSP, FBB
_x000D_
TDD:_x000D_
FCM -_x000D_
FCM,
Flexi RET_x000D_
FCT, Micro
Zone FR, FSP,
FDD, FTM
Flexi Zone Micro
-- FSP_x000D_ FR_x000D_
FCM TDD:_x000D_
Flexi
FCM Zone Micro FDD, Flexi Zone Micro
FCM / FCT -Flexi
TDD:_x000D_ FlexiBTS
Zone Micro BTS
FDD, Flexi BTS TDD:_x000D_
Flexi
-FCM,FCT_x000D_ Zone Micro BTS
FCM_x000D_
- FCT _x000D_
FCM/FCT FCM,
_x000D_ FCT, FR
Flexi Zone MicroFlexi
BTS FDD, FDD,BTSFlexi Zone Micro
TDD:_x000D_
FSM -TDD:_x000D_
FR FCM_x000D_
- FCT_x000D_ FSP
FSM LCR
- FR_x000D_
FCM/FCT _x000D_
Flexi BTS FDD, Flexi BTS TDD:_x000D_
-Flexi
Flexi Zone FCM_x000D_MicroFlexi
BTS FDD, FDD,BTSFlexi Zone Micro
TDD:_x000D_
-TDD:_x000D_
-Flexi FCT_x000D_
FCM_x000D_
FCM/FCT, FT -- FSP
_x000D_ BTS FDD, Flexi BTS TDD:_x000D_
-Flexi FCT_x000D_
FSP_x000D_
FCM/FCT -- FR_x000D_ ZoneFDD,
BTS MicroFlexi
FDD,BTSFlexi Zone Micro
TDD:_x000D_
-TDD:_x000D_ DSP_x000D_
FSP_x000D_
FCM/FCT -- FSP_x000D_
FSP, FBB, FR, FTM
-- FTM_x000D_ Flexi Zone Micro BTS
FBB_x000D_
FBB_x000D_
FCM/FCT --Flexi FCM_x000D_
BTS FDD, Flexi BTS TDD:_x000D_
FR_x000D_
_x000D_
-Flexi FCT_x000D_
FCM_x000D_
FCM/FCT -_x000D_ FTM_x000D_
BTS FDD, Flexi BTS TDD:_x000D_
-_x000D_
-Flexi FBB_x000D_
FCT_x000D_
FCM_x000D_
FCM/FCT -_x000D_ ZoneFDD,
BTS
FSP_x000D_MicroFlexi
FDD,BTSFlexi Zone Micro
TDD:_x000D_
-Flexi
TDD:_x000D_
-Flexi Zone Micro FDD, Flexi Zone Micro
FCT_x000D_
FCM_x000D_
FCM/FCT _x000D_
-TDD:_x000D_ ZoneFDD,
BTS
FSP_x000D_MicroFlexi
FDD,BTSFlexi Zone Micro
TDD:_x000D_
-TDD:_x000D_ FSP_x000D_
FCT_x000D_
FCM/FCT --Flexi
_x000D_
Flexi Zone
FCM_x000D_
Flexi Zone
BTS
Flexi
--TDD:_x000D_
Micro
Micro
FDD,
Zone
FSP_x000D_
FDD,
BTS
Flexi
Micro BTS
Flexi Zone Micro
BTS TDD:_x000D_
-Flexi FSP
FCT_x000D_
Zone
FCM_x000D_Micro FDD, Flexi Zone Micro
FSP _x000D_
FSP,FBB FSP
--TDD:_x000D_
FSP_x000D_
Flexi FCT_x000D_
Zone Micro FDD, Flexi Zone Micro
FSP _x000D_
FSP, FSPFBB
-TDD:_x000D_
FSP_x000D_
FSPC Flexi
_x000D_
Flexi Zone Micro FDD, Flexi Zone Micro
FSPBTS FDD, Flexi BTS TDD:_x000D_
-TDD:_x000D_
FCM, FCT -Flexi Zone Micro FDD, Flexi Zone Micro
FSP_x000D_
FCM,FCT,FR_x000D_
--TDD:_x000D_
FSP
FBB_x000D_
FCM, FCT FCM,FCT,FR_x000D_
- FSP
_x000D_
FCM, FCT Flexi Zone Micro FDD, Flexi Zone Micro
FCM,FCT,FR_x000D_
FCM, FCT TDD:_x000D_
FCM,FCT,FR_x000D_
- FSP_x000D_
FCM, FCT FCM,FCT,FR_x000D_
FCM, FCT FCM,FCT,FR_x000D_
FCM, FCT FCM,FCT,FR_x000D_
FCM, FCT FCM,FCT,FR_x000D_
FCM, FCT FCM,FCT,FR_x000D_
FCM, FCT FCM,FCT,FR_x000D_
FCM, FCT FCM,FCT,FR_x000D_
FCM, FCT FCM,FCT,FR_x000D_
FCM, FCT FCM,FCT,FR_x000D_
FCM, FCT FCM,FCT,FR_x000D_
FCM, FCT FCM,FCT,FR_x000D_
FCM, FCT FCM,FCT,FR_x000D_
FCM, FCT FCM,FCT,FR_x000D_
FCM, FCT FCM,FCT,FR_x000D_
FCM, FCT FCM,FCT,FR_x000D_
FCM, FCT FCM,FCT,FR_x000D_
FCM, FCT FCM,FCT,FR_x000D_
FCM, FCT FCM,FCT,FR_x000D_
FCM, FCT FCM,FCT,FR_x000D_
FCM, FCT FCM,FCT,FR_x000D_
FCM, FCT FCM,FCT,FR_x000D_
FCM, FCT FCM,FCT,FR_x000D_
FCM [FSMr2] / FCT [FSMr3] FCM, FCT, FSP (rel.2), FR
FCM/FCT Flexi BTS FDD, Flexi BTS TDD:_x000D_
FCM -LCR FCM_x000D_
- FCT_x000D_
FCM/FCT, FSP -Flexi BTS FDD, Flexi BTS TDD:_x000D_
FTM_x000D_
FCM/FCT, FSP -Flexi
- FCM_x000D_ FSP_x000D_
BTS FDD, Flexi BTS TDD:_x000D_
-- FCT_x000D_ FR_x000D_
FSP_x000D_
Flexi
-- FSP_x000D_ BTS FDD, Flexi BTS TDD:_x000D_
-FCM, FBB_x000D_
OptIF_x000D_
FCM_x000D_
FCM, FCT -- FR_x000D_ FCT _x000D_
MHA_x000D_
FBB_x000D_
-_x000D_
--Flexi FCT_x000D_
OptIF_x000D_
FCM/FCT _x000D_
_x000D_ RET_x000D_
BTS FDD, Flexi BTS TDD:_x000D_
--Flexi
_x000D_ FBB_x000D_
Zone Micro
FCM, FCT Flexi
FCM,
_x000D_
FCM_x000D_
Zone Micro FDD,
FCT_x000D_FDD, Flexi
Flexi Zone
Zone Micro
Micro
Flexi
-TDD:_x000D_ Zone
FCT_x000D_
TDD:_x000D_
_x000D_ Micro FDD, Flexi Zone Micro
FCM/FCT Flexi
-TDD:_x000D_
_x000D_FSP ZoneFDD,
BTS MicroFlexi
FDD,BTS
Flexi Zone Micro
TDD:_x000D_
--TDD:_x000D_
Flexi Zone Micro BTS
FTM_x000D_
FCM - FSP_x000D_
Flexi
FCM Zone Micro FDD, Flexi Zone Micro
FSP
-TDD:_x000D_
FCT_x000D_
FR, FF MHA
_x000D_
- FSP
FR, FF Flexi
MHA Zone Micro FDD, Flexi Zone Micro
Flexi Filter, FR TDD:_x000D_
Antenna line
- Flexi Zone Micro BTS
Flexi Filter, FR Flexi BTS FDD, Flexi BTS TDD:_x000D_
Flexi Filter, FR -Antenna
Antennaline
Line_x000D_
_x000D_
Flexi Filter RX1-n
Flexi Zone Micro FDD, Flexi Zone Micro
TDD:_x000D_
TX1-n, RX1-n
-TX1-n
Antenna Line
_x000D_
TILT RX1-n
RET
TILT RET
TILT RET
TILT RET
TILT RET
FR, TILT RX1-n, TX1-n, RET, MHA
MHA, RET
FCM/FCT FR, FTM
FCM/FCT - FCM_x000D_
FCM -FCM
FCT
FCM, FCT LCR
MHA in AISG mode
AISG MHA MHA in AISG mode_x000D_
FSM FR, MHA AISG, RET
FSM FR, MHA AISG, RET
FSM FR, MHA AISG, RET
FSM FR, MHA AISG, RET
FSM Flexi BTS FDD:_x000D_
FSM -Flexi FCM_x000D_
BTS FDD:_x000D_
_x000D_
-Flexi FCM_x000D_
Flexi BTS
ZoneFDD,
MicroFlexi
FDD,BTS TDD:_x000D_
Flexi Zone Micro
_x000D_
-TDD:_x000D_
FCM_x000D_
FCM/FCT FCM,
Flexi FCT
Zone Micro FDD, Flexi Zone Micro
-- FCT_x000D_
FSP
FRx/LTX TDD:_x000D_
FR
_x000D_
FRx/LTX -Flexi
FR FSPZone Micro FDD, Flexi Zone Micro
FRx/LTX TDD:_x000D_
FR
- Flexi Zone Micro BTS
FRx / LTX FR, RX1-n
FRx / LTX FR, TX1-n, RX1-n
FRx/LTX FR, TX1-n, RX1-n
FRx/LTX FR, TX1-n
FRx/LTX Flexi BTS FDD, Flexi BTS TDD:_x000D_
FRx/LTX -Flexi TX1-n_x000D_
BTS FDD, Flexi BTS TDD:_x000D_
_x000D_
-TX1-n FR_x000D_
FRx/LTX Flexi Zone Micro FDD, Flexi Zone Micro
- TX1-n_x000D_
FRx/LTX TDD:_x000D_
Flexi
_x000D_ BTS FDD, Flexi BTS TDD:_x000D_
FRx/LTX FR ZoneLine
-FlexiAntenna
RX1-n_x000D_
Micro FDD, Flexi Zone Micro
_x000D_
TDD:_x000D_
FR Flexi Zone
Flexi BTS FDD,
MicroFlexi
FDD,BTS TDD:_x000D_
Flexi Zone Micro
-- FR_x000D_
FR_x000D_
FRx/LTX TDD:_x000D_
TX1-n
-- Antenna Line
TX1-n_x000D_
-TX1-n
Antenna Line
FRx/LTX _x000D_
FRx/LTX Flexi
FR Zone Micro FDD, Flexi Zone Micro
FRx/LTX TDD:_x000D_
FR
- FR
FRx/LTX FR, TX1-n, RX1-n
FRx/LTX FR
FRx/LTX FR
FRM2/LTX TX1-n
FRM2/LTX FR
FRx/LTX FR
FR/RFSW FR
FR/RFSW FAN, FAN_GROUP
FR/RFSW FAN, FAN_GROUP
FR/RFSW FAN, FAN_GROUP
FR/RFSW FR
FR/RFSW RFM connected over OBSAI RP1
FR interface:_x000D_
TX1-n
FR_x000D_
FRx / LTX FR
_x000D_
FRx / LTX RRU
FR connected over CPRI Ir
FR interface:_x000D_
Antenna line
FR, TX1-n
FR FR
FCM, FCT OptIF
FCM, FCT OptIF
FCM, FCT OptIF
FCM, FCT OptIF
FCM, FCT OptIF
#N/A OptIF
FCM, FCT OptIF
FCM, FCT OptIF
FCM, FCT FCM, FCT, FBB
FCM, FCT FCM
FCM, FCT FSP, FBB, OptIf
FCM, FCT, FSP FCM, FCT, FBB
FCM, FCT FCM, FCT, FBB
FCM FCM
FCM FCM
FCM OptIf
FCT, FSP Flexi BTS FDD, Flexi BTS TDD:_x000D_
FCM, FCT -FSP,OptIF FCT_x000D_
_x000D_
FCM, FCT FSP,FBB,OptIF
Flexi Zone Micro FDD, Flexi Zone Micro
FCM, FCT TDD:_x000D_
FCM,FCT,FBB
FCM, FCT -FCM,FCT,FBB FSP
FCM, FCT FCM,FCT,FBB
FSM Flexi BTS FDD, Flexi BTS TDD:_x000D_
FSM -FBB FSM_x000D_
_x000D_
FR
Flexi Zone Micro FDD, Flexi Zone Micro
TDD:_x000D_
FSM/FAN, FR
-Flexi FlexiBTS
Zone Micro
FDD, BTS
Flexi BTS TDD:_x000D_
FSM -Flexi FSM_x000D_
BTS FDD, Flexi BTS TDD:_x000D_
-- FR_x000D_ FSM_x000D_
FCM Flexi
-_x000D_ BTS Line_x000D_
Antenna FDD, Flexi BTS TDD:_x000D_
FSM --FR, FCM_x000D_
LCR_x000D_
FSP,
Flexi
-- FCT_x000D_ ZoneFBB, FCM,
Micro FDD, FCT
Flexi Zone Micro
FSM TDD:_x000D_
LCR LCG_x000D_
_x000D_
_x000D_
-LCR
Flexi Flexi ZoneMicro
Micro BTS Flexi Zone Micro
FSM Flexi Zone Zone Micro FDD,
FDD, Flexi Zone Micro
FCM/FCT TDD:_x000D_
TDD:_x000D_
Flexi BTS FDD, Flexi BTS TDD:_x000D_
-- Flexi Flexi Zone
Zone Micro
GNSS_x000D_ Micro BTS_x000D_
BTS
FSM FSP
-_x000D_ LCR
FCM/FCT Flexi
Flexi BTS ZoneFDD,MicroFlexi
FDD,BTS TDD:_x000D_
Flexi Zone Micro
FCM -TDD:_x000D_ FCM [FSMr2]_x000D_
Flexi BTS FDD, Flexi BTS TDD: _x000D_
-- FCT [FSMr3]_x000D_
FlexiBTS
Zone
FCM_x000D_ Micro BTS
FSM Flexi
-- FSP_x000D_ FDD, Flexi BTS TDD:_x000D_
All FCT_x000D_
units_x000D_
FCM / FCT -- FBB_x000D_
Flexi BTS FDD, Flexi BTS TDD:_x000D_
FSP_x000D_
_x000D_
-Flexi DSP_x000D_
FCM_x000D_
FCM / FCT -Flexi FBB_x000D_
BTS
ZoneFDD,MicroFlexi
FDD,BTS TDD:_x000D_
Flexi Zone Micro
_x000D_
-_x000D_ FCT_x000D_
-TDD:_x000D_
FCM_x000D_
FCM FR
Flexi Zone Micro FDD, Flexi
_x000D_
-Flexi
-Flexi FlexiZone
FCT_x000D_
Zone Micro
MicroFDD,
BTS Flexi Zone
Zone Micro
Micro
TDD:_x000D_
Zone
BTS
TDD:_x000D_
_x000D_ Micro
FDD, FDD,
Flexi Flexi
BTS Zone Micro
TDD:_x000D_
Flexi Filter, External Filter, RFM FlexiFSP
-TDD:_x000D_
- FCM_x000D_
FSPZone Micro FDD, Flexi Zone Micro
TX1-n_x000D_
Flexi Zone Micro BTS
-RX1-n
FCT_x000D_
TDD:_x000D_
LCR
-- FSP_x000D_
Flexi Zone Micro BTS
FR -Antenna
FBB_x000D_
line
FR _x000D_
Antenna Line
Flexi Zone Micro FDD, Flexi Zone Micro
Flexi Filter, FR Antenna
TDD:_x000D_line
FCM -FSP
FSP
FCM OptIF
FCT FAN1-n
FSM Optif
FCT FSP, FBB
FCT Fan/Fan group
FCT Fan/Fan group
FCT Fan/Fan group
FSMr2: FCM, FSMr3: FCT Flexi BTS FDD, Flexi BTS TDD:_x000D_
FSMr2: FCM, FSMr3: FCT 4082:_x000D_
Flexi BTS FDD, Flexi BTS TDD:_x000D_
-4082:_x000D_ FSMr2: FCM, FSP_x000D_
FSMr2: FCM, FSMr3: FCT -Flexi BTS FDD, Flexi BTS TDD:_x000D_
FSMr3:
-4082:_x000D_ FSMr2: FCT_x000D_
FCM, FSP_x000D_
FCM, FCT _x000D_
Flexi
-- FSMr3: BTSFCT_x000D_
FDD, Flexi BTS TDD:_x000D_
-4083:_x000D_ FSMr2:
FCM_x000D_FCM, FSP_x000D_
FSM _x000D_
LCR
-- FSMr3:
4083:_x000D_ FSMr2: FCT_x000D_
FCT_x000D_FCM_x000D_
FSM -_x000D_
-- FCM_x000D_
_x000D_ FSMr3: FCT_x000D_
4083:_x000D_
-Flexi FSMr2:
FCTFBB FCM_x000D_
FCT _x000D_
-FCT, Zone
FSMr3: Micro FDD, Flexi Zone Micro
FCT_x000D_
-TDD:_x000D_
4085: FSMr2:(forFCM_x000D_
FSMr3
FCM, FCT _x000D_
FCM,
-- FSMr3: FCT, Optif only)_x000D_
FCT_x000D_
4085: FSMr3:
FSP FCT_x000D_
(for FSMr3
FCM _x000D_
FCM,
_x000D_ FCT, OptIF only)_x000D_
-4085: FSMr3: FCT_x000D_
(for FSMr3 only)_x000D_
FCM/FCT Flexi
_x000D_ Zone
BTS MicroFlexi
FDD, FDD, Flexi
BTS Zone Micro
TDD:_x000D_
-TDD:
-Flexi FSMr3: FCT_x000D_
_x000D_
GNSS_x000D_
FCM/FCT GNSS
_x000D_ Zone Micro FDD, Flexi Zone Micro
-TDD: 4082:
_x000D_ FSP_x000D_
_x000D_
FCM/FCT Flexi
GNSS
-- 4083:
Flexi Zone
Zone Micro
Flexi ZoneFDD,
Micro Flexi
Micro
FDD, Zone
Zone Micro
BTS_x000D_
Flexi Micro
TDD: 4082: FSP_x000D_
_x000D_
FCM/FCT -- 4085:
TDD:_x000D_
GNSS Flexi Zone Micro BTS
-- 4083: Flexi
4082:Zone Zone Micro BTS_x000D_
FSP_x000D_
FCM/FCT -- Flexi
4085:
GNSS Flexi Micro
4083: Flexi Zone
BTS BTS
Zone Micro
Micro BTS_x000D_
FCM, FCT -Antenna
4085: Flexi
LineZone Micro BTS
FCM, FCT Antenna Line
FCT Flexi BTS FDD, Flexi BTS TDD:_x000D_
-FCM, FCT_x000D_
FCT
_x000D_
#N/A FBBC
Flexi Zone Micro FDD, Flexi Zone Micro
#N/A TDD:_x000D_
Flexi BTS FDD, Flexi BTS TDD:_x000D_
FCM/FCT -Flexi FSPBTS FDD, Flexi BTS TDD:_x000D_
FCM_x000D_
-- FCT_x000D_ FCM_x000D_
#N/A GNSS
_x000D_
- FCT_x000D_
FSM Flexi
_x000D_ Zone MicroFlexi
BTS FDD, FDD,BTS
Flexi Zone Micro
TDD:_x000D_
#N/A TDD:_x000D_
LCR_x000D_
Flexi
LCR Zone Micro FDD, Flexi Zone Micro
-TDD:_x000D_
_x000D_ Flexi Zone Micro BTS
FCM,FCT GTP-U
Flexi
- FlexiZone ZoneMicro
MicroFDD,
BTS Flexi Zone Micro
FCM/FCT TDD:_x000D_
LNMME
FCM,FCT LCR
LNADJ
FCM/FCT LNMME
FCM/FCT Flexi BTS FDD, Flexi BTS TDD:_x000D_
FCM,FCT -LCR FCM_x000D_
- FCT_x000D_
FCM,FCT LCR
_x000D_
FCM/FCT Flexi BTS ZoneFDD,
MicroFlexi
FDD,BTS
Flexi Zone Micro
TDD:_x000D_
FCM/FCT -TDD:_x000D_
FCM_x000D_
Flexi BTS FDD, Flexi BTS TDD:_x000D_
Flexi
-- FCT_x000D_ Zone Micro BTS
FCM_x000D_
FCM, FCT Flexi
_x000D_ BTS FDD, Flexi BTS TDD:_x000D_
-- FCT_x000D_
FCM_x000D_
FCM Flexi
_x000D_ ZoneFDD,
BTS MicroFlexi
FDD,BTS
Flexi Zone Micro
TDD:_x000D_
--TDD:_x000D_
FCT_x000D_
FCM_x000D_
FCM/FCT Flexi
_x000D_ ZoneFDD,
BTS MicroFlexi
FDD,BTS
Flexi Zone Micro
TDD:_x000D_
Flexi Zone Micro BTS
--TDD:_x000D_
FCT_x000D_
FCM_x000D_
#N/A Flexi
FCM,
_x000D_ Zone
FCT Micro FDD, Flexi Zone Micro
Flexi Zone Micro BTS
-TDD:_x000D_
FCT_x000D_
#N/A Flexi
FCM,
_x000D_Zone
FCT Micro FDD, Flexi Zone Micro
- Flexi Zone Micro BTS
TDD:_x000D_
#N/A Flexi
FCM,ZoneFCT Micro FDD, Flexi Zone Micro
-TDD:_x000D_
Flexi Zone Micro BTS
FSP LCR
- Flexi Zone Micro BTS
FCT LCR
LNADJ LNADJ
#N/A LNCEL
#N/A Flexi BTS FDD:_x000D_
FCM,FCT -LNADJ
FCM, FCT_x000D_
_x000D_
FCM,FCT LNADJ
Flexi Zone Micro:_x000D_
FCM,FCT -LNMME
Flexi Zone Micro BTS
FCM,FCT LNMME
FSM Flexi BTS FDD, Flexi BTS TDD:_x000D_
FCM LCR_x000D_
Flexi BTS FDD, Flexi BTS TDD:_x000D_
_x000D_
-Flexi FCM_x000D_
FCM,FCT Flexi BTS
ZoneFDD,
MicroFlexi
FDD,BTS TDD:_x000D_
Flexi Zone Micro
-LNADJG_x000D_ FCT_x000D_
FCM,FCT TDD:_x000D_
Flexi BTS FDD, Flexi BTS TDD:_x000D_
_x000D_
Flexi
lcrId
LNADJG_x000D_ Zone
of the Micro
cell FDD, Flexi Zone Micro
FSP Flexi
LCR
TDD:_x000D_ Zone Micro FDD, Flexi Zone Micro
_x000D_
TDD:_x000D_
FSP, FSM -Flexi
Flexi FlexiBTS
Zone
Zone Micro
FDD,
MicroFlexi
FDD,BTS TDD:_x000D_
Flexi Zone Micro
-- FCM FCM/FCT_x000D_
FSM TDD:_x000D_
Flexi BTS FDD, Flexi BTS TDD:_x000D_
_x000D_
-FSP,FBB Flexi Zone Micro
FCM_x000D_
FSP Flexi Zone Micro FDD, Flexi Zone Micro
- FCT_x000D_
#N/A TDD,
Flexi
- FSP_x000D_ FlexiFDD,
BTS Zone:_x000D_
Flexi BTS TDD:_x000D_
#N/A -Flexi FSP
FSP_x000D_
- FBB_x000D_ BTS FDD, Flexi BTS TDD:_x000D_
--_x000D_ FBB_x000D_
FSP_x000D_
#N/A Flexi
_x000D_ BTS FDD, Flexi BTS TDD:_x000D_
-Flexi
-Flexi Zone Micro FDD, Flexi Zone Micro
FBB_x000D_
FSP_x000D_
FTLB, FTIB, FSM, FTIF NE-FTM-1 Zone Micro FDD, Flexi Zone Micro
TDD:_x000D_
_x000D_
-TDD:_x000D_
FBB_x000D_
FTLB, FTIB, FSM, FTIF -FTM FSPZone Micro FDD, Flexi Zone Micro
Flexi
_x000D_
-TDD:_x000D_
FSP
FTLB, FTIB, FSM, FTIF Flexi Zone Micro FDD, Flexi Zone Micro
BFDGRP
-TDD:_x000D_
FSP
FTLB, FTIB, FSM, FTIF PPTT
- FSP
FTLB, FTIB, FSM, FTIF ETHLK
FTLB, FTIB, FSM, FTIF IKESA
FTLB, FTIB, FSM, FTIF ETHLK
FTLB, FTIB, FSM, FTIF STPG
FTLB, FTIB, FSM, FTIF STPG
FTLB, FTIB, FSM, FTIF CERTH
FTLB, FTIB, FSM, FTIF ETHLK
FTLB, FTIB, FSM, FTIF ETHLK
FTLB, FTIB, FSM, FTIF ETHLK
FIIB, FILB, FSIB, FTIA, FTIB, FTLB, FTFB, FSM, FTIF ETHLK
FTLB, FTIB, FSM, FTIF PPTT
FTLB, FTIB, FSM, FTIF PPTT
FTLB, FTIB, FSM, FTIF PPTT
FTLB, FTIB, FSM, FTIF PPTT
FSM, FTIF UNIT
FTLB, FTIB, FSM, FTIF OAMMA, OAMMD
FTIB, FTFB, FTLB, FSM, FSI, FTIF, FIIF OAMMEP
FTLB, FTIB, FSM, FTIF NE-FTM-1
FTLB, FTIB, FSM, FTIF CERTH
FTLB, FTIB, FSM, FTIF BFD
FTLB, FTIB, FSM, FTIF BFD
FTIB, FTFB, FTLB ETHLK
FTLB, FTIB, FSM, FTIF TWAMP
FTLB, FTIB, FSM, FTIF TWAMP
FSM, FTIF INTP
FTLB, FTIB, FSM, FTIF CERTH
FTLB, FTIB, FSM, FTIF CERTH
FTLB, FTIB, FSM, FTIF FTM
STPG
STPG
FSM,FSI,FTIF,FIIF,FTLB,FTIB TOPM_x000D_
FSM,FTIF IEIF,IVIF_x000D_
FSM UNIT
FTLB, FTIB, FSM, FTIF IPSECC
FSM,FTIF IPNO
#N/A IPSECC
FR
FSP, FBB
FCM, FCT, FR, FTM, FSP
Flexi BTS FDD, Flexi BTS TDD:_x000D_
-FAN TX_x000D_
- RX_x000D_
FAN
_x000D_
Flexi BTSZoneFDD,
MicroFlexi
FDD,BTS
Flexi Zone Micro
TDD:_x000D_
-TDD:_x000D_
FCM_x000D_
- FCT_x000D_
-- TX1-n_x000D_
FCT_x000D_
FBB
LCR
RX1-n_x000D_
- FR_x000D_
_x000D_
FCM, FCT
Flexi
FSM Zone Micro FDD, Flexi Zone Micro
TDD:_x000D_
FR
- FSP
FCM [FSMr2]/FCT [FSMr3]
FCM [FSMr2]/FCT [FSMr3]
FlexiBTS: FCM (FSMr2) / FCT (FSMr3)
FR
OptIF
OptIF
FSM, FR
FSM, FR
FSM, FR
FSM, FR, FT
FSM, FCT, FR, FT, FSP, Faraday
FR, MHA, TILT, EFIL
FF, AISG MHA
FTM
LCR
FSP
Filter, FR, FTM/FCT
OptIF
Antenna line
RX, TX
FSP
FSMr2: FCM, FSP MCU
FSMr3: FCT
FCM, FCT
FCM, FCT
LCR
RF
Source in issue 01 Source in release RL60
FCM, FCT, FSP, FTM, FCM, FCT, FSP, FTM_x000D_
FBB_x000D_
Flexi BTS FDD, Flexi BTS FCM/FCT, FSP, FR, Faraday / Nyquist
TDD:_x000D_
Flexi BTS FDD:_x000D_ FCM_x000D_
-- FCM_x000D_ FCM_x000D_ _x000D_
--- FCT_x000D_ FSP_x000D_
FCT_x000D_
FSP, FT, FF, MHA, TILT, FR, FA, extension
-FSP_x000D_
-_x000D_ FBB_x000D_
FSP_x000D_ FSM_x000D_
FCM/FCT, FSP_x000D_
-FBB_x000D_
-FCM, FTM_x000D_
FBB_x000D_ _x000D_
_x000D_
Flexi
-_x000D_ Zone
FCT, Micro
MHA_x000D_ FDD, Flexi
FSP, FBB FCM/FCT, FSP, DSP
-Zone DSP_x000D_
Micro TDD:_x000D_
-Flexi
FCM,
_x000D_ RET_x000D_
FCT, Micro
Zone FR, FSP,
FDD, FTM
Flexi FCM, FR, FF, FA, FSP, FTM
-- FSP_x000D_ FR_x000D_
Flexi
Zone
FCM Zone
Micro Micro FDD,
TDD:_x000D_ Flexi FCM, FR, FF, FA, FSP, FTM
-Zone
Flexi BTS FDD, Flexi BTS FSP Micro TDD:_x000D_ FCM/FCT _x000D_
-TDD:_x000D_ Flexi Zone Micro BTS
FCM,FCT_x000D_
- FCM_x000D_
FCM,
- FCT FCT, FR
_x000D_ FlexiBTS: FCM (FSMr2) / FCT (FSMr3),
_x000D_
Flexi BTS FDD, Flexi BTS FR
Flexi
FR Zone Micro FDD, Flexi
TDD:_x000D_ FR
-Zone Micro TDD, Flexi
FCM_x000D_
LCR
-Zone:_x000D_ FCT_x000D_ LCR
- FR_x000D_
Flexi FSPBTS FDD, Flexi BTS FCM (FSMr2), FCT (FSMr3)
_x000D_
TDD:_x000D_
Flexi BTS FDD, Flexi BTS
-Flexi
TDD:_x000D_ Zone Micro FDD, Flexi
FCM_x000D_
Flexi
-Zone BTS
MicroFDD,
FCT_x000D_ Flexi BTS
TDD:_x000D_ FSP, DSP, FT, FCM/FCT
-TDD:_x000D_ FCM_x000D_
-- FSP
_x000D_
Flexi BTS FDD, Flexi BTS
FCT_x000D_ - FSP (fixed and plug-in cards)
-TDD:_x000D_
Flexi FSP_x000D_
Zone FR,
Micro FDD, Flexi -All
FR
-FSP,
--Zone FR_x000D_
FBB,
DSP_x000D_ FTM possible units.
Micro
FSP_x000D_ TDD:_x000D_ - FTM
---Flexi FSP_x000D_
FTM_x000D_
BTS
Flexi FDD,
Zone
FBB_x000D_ Flexi BTS
Micro -FCM/FCT,
FF FSP
-TDD:_x000D_
-Flexi FBB_x000D_
FCM_x000D_
-BTS_x000D_
_x000D_ FR_x000D_
BTS FDD, Flexi BTS FCM/FCT, FSP
-TDD:_x000D_
-_x000D_ FCT_x000D_
FCM_x000D_
FTM_x000D_
_x000D_
Flexi
--_x000D_ BTS FDD, Flexi BTS
FBB_x000D_
FCT_x000D_ FCM/FCT, FSP
Flexi
Flexi
TDD:_x000D_ Zone:
FCM_x000D_
Zone _x000D_
Micro FDD,BTSFlexi
-_x000D_
Flexi
-Flexi FSP_x000D_
BTS
Flexi FDD,
Zone
Zone
FCT_x000D_MicroFlexi
FDD, Flexi FCM/FCT, FSP
Zone
-Flexi Micro
FCM_x000D_
Zone TDD:_x000D_
Micro FDD, Flexi
-_x000D_
TDD:_x000D_
Controller_x000D_
Zone
-Flexi MicroFDD,
FSP_x000D_
BTS
FSP_x000D_
FCT_x000D_ TDD:_x000D_
Flexi BTS FCM/FCT, FSP
Zone
-Flexi
--FSP,FBB Micro
Zone
FCM_x000D_
Flexi Zone TDD,
Micro Flexi
FDD,
Access
Micro Flexi
Point
_x000D_
TDD:_x000D_
Zone:_x000D_
-Zone Flexi
FSP_x000D_
Micro
FCT_x000D_ Micro BTS
ZoneTDD:_x000D_
BTS FSP
-Flexi
_x000D_ Zone Micro FDD, Flexi
FCM_x000D_
-FSP,
-Zone FSP
FSP_x000D_
FBB
MicroMicro
FCT_x000D_ TDD:_x000D_ FSP
Flexi
_x000D_ Zone FDD, Flexi
-Zone
Flexi FSPBTS
FSP_x000D_
MicroFDD, Flexi BTS
TDD:_x000D_ FSP, FSM
Flexi
_x000D_
TDD:_x000D_Zone Micro FDD, Flexi
-FCM,FCT,FR_x000D_
Zone FSPMicro TDD:_x000D_ FCM, FCT
-Flexi Zone Micro FDD, Flexi
FSP_x000D_
--Zone
FSP
FCM,FCT,FR_x000D_
Micro TDD:_x000D_
FBB_x000D_ FCM, FCT
FSP
- FCM_x000D_
FCM,FCT,FR_x000D_ FCM, FCT
-FCM,FCT,FR_x000D_
FCT_x000D_ FCM, FCT
_x000D_
FCM,FCT,FR_x000D_
Flexi Zone Micro FDD, Flexi FCM, FCT
Zone Micro TDD:_x000D_
FCM,FCT,FR_x000D_ FCM, FCT
-FCM,FCT,FR_x000D_
FSP_x000D_ FCM, FCT
FCM,FCT,FR_x000D_ FCM, FCT
FCM,FCT,FR_x000D_ FCM, FCT
FCM,FCT,FR_x000D_ FCM, FCT
FCM,FCT,FR_x000D_ FCM, FCT
FCM,FCT,FR_x000D_ FCM, FCT
FCM,FCT,FR_x000D_ FCM, FCT
FCM,FCT,FR_x000D_ FCM, FCT
FCM,FCT,FR_x000D_ FCM, FCT
FCM,FCT,FR_x000D_ FCM, FCT
FCM,FCT,FR_x000D_ FCM, FCT
FCM,FCT,FR_x000D_ FCM, FCT
FCM,FCT,FR_x000D_ FCM, FCT
FCM,FCT,FR_x000D_ FCM, FCT
FCM,FCT,FR_x000D_ FCM, FCT
FCM,FCT,FR_x000D_ FCM, FCT
FCM,FCT,FR_x000D_ FCM, FCT
FCM,FCT,FR_x000D_ FCM, FCT
FCM,FCT,FR_x000D_ FCM, FCT
FCM,FCT,FR_x000D_ FCM, FCT
FCM, FCT, FSP (rel.2), FR FCM, FSP [FSMr2] / FCT, FSP [FSMr3]
Flexi BTS FDD, Flexi BTS FCM/FCT, FSP, FTM, FR, FF, MHA,
TDD:_x000D_
LCR RET_x000D_
LCR
- FCM_x000D_
-Flexi BTS FDD, Flexi BTS
FCT_x000D_ FSM/FCT, FSP, OptIF
TDD:_x000D_
- FTM_x000D_
Flexi BTS FDD, Flexi BTS FSP, FCM/FCT, OptIF
-TDD:_x000D_
-Flexi FCM_x000D_
FSP_x000D_
-- FCT_x000D_ BTS FDD, Flexi BTS
TDD:_x000D_ FR_x000D_
FSP_x000D_
-- FSP_x000D_
FCM, FCT _x000D_
FBB_x000D_
OptIF_x000D_ FCM, FCT _x000D_
-_x000D_ FCM_x000D_
---Flexi FR_x000D_
MHA_x000D_
FBB_x000D_
BTS FDD, Flexi BTS
FCT_x000D_
_x000D_
FCM/FCT
-TDD:_x000D_
-FCM,
_x000D_ OptIF_x000D_
RET_x000D_
_x000D_
--Flexi FCT_x000D_
FBB_x000D_ FCM, FCT_x000D_
_x000D_
Flexi
_x000D_ Zone
FCM_x000D_
Zone Micro FDD,
MicroFlexi Flexi
FDD,BTS
Flexi _x000D_
_x000D_
Flexi
Flexi
-Zone BTS
Zone
Micro
FCT_x000D_FDD,
Micro
TDD, FDD,
Flexi Flexi FT, FCT
Zone
Flexi
TDD:_x000D_ Micro
Zone TDD:_x000D_
Micro FDD, Flexi
Zone
Zone:_x000D_
_x000D_
FCM
--Zone FlexiMicro TDD, Flexi
ZoneTDD:_x000D_
Micro Zone BTS
-(Flexi
Flexi FSP Micro
FTM_x000D_
Zone Access
Zone Micro FDD, Flexi
BTS_x000D_
MHA
-Zone FSPMicro TDD, Flexi
FCT_x000D_ MHA
Point):_x000D_
_x000D_
_x000D_
MHA
-Flexi FSP_x000D_
Zone:_x000D_ MHA
Flexi Zone:_x000D_
Zone Micro FDD, Flexi
-_x000D_
-ZoneFSP
Antenna line
FlexiMicro
Zone Access Point Antenna line
Flexi Zone TDD:_x000D_
(Flexi ZoneBTS
Flexi BTS FDD,
- Flexi Zone Micro Flexi Antenna line
Controller):_x000D_
TDD:_x000D_
BTS_x000D_
Antenna
Flexi Zoneline Antenna connector
-_x000D_
Antenna Line_x000D_
Controller_x000D_
RX1-n
_x000D_ RX1-n
Flexi Zone:_x000D_
Flexi
- FlexiZone
TX1-n, RX1-n
Zone Micro
Acces FDD,
PointFlexi
Zone Micro
TX1-n _x000D_ TDD:_x000D_
-RX1-n
Antenna Line
RET TILT
RET TILT
RET TILT
RET TILT
RET TILT
RX1-n, TX1-n, RET, MHA RX, TX, TILT, MHA, EFIL
MHA, RET
FR, FTM Filter, FR, FTM/FCT
- FCM_x000D_ FCM/FCT
-FCM
FCT FCM
LCR LCR
MHA in AISG mode
MHA in AISG mode_x000D_ AISG MHA
FR, MHA AISG, RET Flexi Filter, FA, AISG MHA, TILT
FR, MHA AISG, RET Flexi Filter, FA, AISG MHA, TILT
FR, MHA AISG, RET Flexi Filter, FA, AISG MHA, TILT
FR, MHA AISG, RET Flexi Filter, FA, AISG MHA, TILT
Flexi BTS FDD:_x000D_ FSM
-Flexi FCM_x000D_
BTS FDD:_x000D_ FSM
_x000D_
-Flexi FCM_x000D_
Flexi BTS
ZoneFDD,
MicroFlexi
FDD,BTS
Flexi
_x000D_
TDD:_x000D_
Zone
FCM,
Flexi Micro
FCT TDD, Flexi
Zone Micro FDD, Flexi FCM/FCT
-Zone:_x000D_FCM_x000D_
Zone
-FR Micro TDD, Flexi
FCT_x000D_ LTX
-Zone:_x000D_
FSP
_x000D_
FR LTX
-Flexi FSP
FR Zone Micro FDD, Flexi LTX
Zone Micro TDD:_x000D_
FR,
- Flexi RX1-n
Zone Micro BTS LTX, RX1-n
FR, TX1-n, RX1-n LTX, TX1-n, RX1-n
FR, TX1-n, RX1-n LTX, TX1-n, RX1-n
FR, TX1-n LTX / TX1-n
Flexi BTS FDD, Flexi BTS TX1-n
TDD:_x000D_
Flexi BTS FDD, Flexi BTS TX1-n
-TDD:_x000D_
TX1-n_x000D_
TX1-n
_x000D_ TX1-n
- FR_x000D_
Flexi ZoneFDD,
BTS
- TX1-n_x000D_ MicroFlexi
FDD,BTS
Flexi LTX, RX1-n
Zone
TDD:_x000D_
_x000D_
FR Micro TDD:_x000D_ LTX
-Flexi Antenna Line
RX1-n_x000D_
Flexi Zone
_x000D_
MicroFlexi
BTS FDD, FDD,BTS
Flexi FR, TX1-n
Zone
TDD:_x000D_ Micro TDD:_x000D_
Flexi
TX1-n Zone Micro FDD, Flexi
-- FR_x000D_ TX1-n
Zone FR_x000D_
MicroLine_x000D_
TDD:_x000D_
-TX1-n
-- Antenna
TX1-n_x000D_ TX1-n
Antenna
_x000D_ Line_x000D_
_x000D_
FR
_x000D_ LTX
Flexi
Flexi Zone:_x000D_
Zone Micro FDD, Flexi
Flexi
-FR FlexiZone:_x000D_
ZoneTDD,
AccesFlexi
Point LTX
Zone
-FR,
FlexiMicro
ZoneRX1-n
Acces Point
TX1-n,
Zone:_x000D_ LTX/TX1-n/RX1-n
-FR
FR LTX
FR LTX
TX1-n TX1-n
FR LTX
FR LTX
FR RFSW
FAN, FAN_GROUP FAN, FAN_GROUP
FAN, FAN_GROUP Fan supervision
FAN, FAN_GROUP RFSW
FR RFSW
FR RFSW
TX1-n TX1-n
FR FR
FR FR
Antenna line Antenna line
FR FR
OptIF OptIF
OptIF OptIF
OptIF OptIF
OptIF OptIF
OptIF OptIF
OptIF #N/A
OptIF OptIF
OptIF OptIF
FCM, FCT, FBB FCM, FCT
FCM FCM, FCT
FSP, FBB, OptIf FSP, OptIF
FCM, FCT, FBB FCM, FCT, FSP
FCM, FCT, FBB FCM, FCT, FSP
FCM FSM
FCM FSM
OptIf OptIf
Flexi BTS FDD, Flexi BTS FCT, PSP
TDD:_x000D_
FSP,OptIF FSP, OptIF
- FCT_x000D_
FSP,FBB,OptIF
_x000D_ FSP, OptIF
Flexi
FCM,FCT,FBB Zone Micro FDD, Flexi FCM (MUKSU2), FCT (MURKKU2)
Zone
FCM,FCT,FBB Micro TDD:_x000D_ FCM (MUKSU2), FCT (MURKKU2)
- FSP
FCM,FCT,FBB FCM (MUKSU2), FCT (MURKKU2)
Flexi BTS FDD, Flexi BTS FSM
TDD:_x000D_
FBB FBB
- FSM_x000D_
FR
_x000D_
Flexi
FSM/FAN, Zone FR Micro FDD, Flexi
Zone
Flexi BTS FDD, Micro TDD:_x000D_
Flexi BTS
-TDD:_x000D_ Flexi Zone Micro BTS
Flexi BTS FDD, Flexi BTS FSM
-TDD:_x000D_ FSM_x000D_
Flexi
-- FR_x000D_ BTS FDD, Flexi BTS FSM, LCR
TDD:_x000D_ FSM_x000D_
-FR,
_x000D_ Antenna Line_x000D_
FSP, FBB, FCM, FCT FR, FSP
-- FCM_x000D_ LCR_x000D_
Flexi
LCR
-- FCT_x000D_ Zone Micro FDD, Flexi LCR
LCG_x000D_
-Zone
LCR
_x000D_
Micro TDD:_x000D_
FR_x000D_ LCR
-_x000D_ Flexi Zone Micro BTS
Flexi BTS ZoneFDD,MicroFlexi
FDD,BTS
Flexi FCM/FCT
Flexi
Zone
TDD:_x000D_ Zone
Micro Micro FDD, Flexi
TDD:_x000D_
FSP
Zone FSPC
- GNSS_x000D_ FlexiMicro
ZoneTDD:_x000D_
Micro BTS
-_x000D_
Flexi FlexiBTS
Zone Micro
FDD, Flexi BTS FCM [FSMr2], FCT [FSMr3], FSP, DSP
BTS_x000D_
TDD:_x000D_
Flexi Zone Micro
BTS FDD, FlexiFDD,BTS
Flexi FCM, FSP
-TDD:
Zone LCRMicro
FCM [FSMr2]_x000D_
_x000D_ TDD:_x000D_
Flexi
-- FCT BTS FDD, Flexi BTS FSM, FR
TDD:_x000D_ Flexi [FSMr3]_x000D_
Zone Micro BTS
FCM_x000D_
-- FSP_x000D_
Flexi BTS FDD, Flexi BTS
FCT_x000D_ FCM (FSMr2) / FCT (FSMr3)
All
-Flexi
TDD:_x000D_ units_x000D_
FBB_x000D_
-_x000D_ FSP_x000D_
BTS FDD, Flexi BTS FCM (FSMr2) / FCT (FSMr3)
--TDD:_x000D_DSP_x000D_
FCM_x000D_
FBB_x000D_
Flexi
FR
-_x000D_ Zone Micro FDD, Flexi
FCT_x000D_ FR
-_x000D_
Zone FCM_x000D_
MicroFDD,
TDD:_x000D_
_x000D_
Flexi
-Flexi Zone
BTS
Zone Micro
Micro FDD,BTS
Flexi Flexi
Flexi
FCT_x000D_
-TDD:_x000D_
Zone Flexi Zone
Micro
Zone MicroFDD,
BTS Flexi
TDD:_x000D_
Micro FDD, Flexi
Zone Micro TDD:_x000D_
_x000D_
TX1-n_x000D_ TX1-n / RX1-n
-Zone
-LCR
Flexi
RX1-nFSP Micro
FCM_x000D_ TDD:_x000D_
FSPZone Micro FDD, Flexi
-ZoneFlexiMicro
ZoneTDD:_x000D_
FCT_x000D_ Micro BTS
-Antenna
- FSP_x000D_lineMicro BTS
Flexi Zone Antenna line
-Antenna
FBB_x000D_
Line Antenna Line
_x000D_
Antenna
Flexi Zone line
Micro FDD, Flexi Antenna line
Zone
FSP Micro TDD:_x000D_ FSP
-OptIF
FSP OptIF
FAN1-n FAN1-n
Optif FR
FSP, FBB FSP
Fan/Fan group Fan/Fan group
Fan/Fan group Fan/Fan group
Fan/Fan group Fan/Fan group
Flexi BTS FDD, Flexi BTS 4082:
TDD:_x000D_
Flexi BTS FDD, Flexi BTS FSMr2:
4082: FCM, FSP MCU
4082:_x000D_
TDD:_x000D_ FSMr3:
FSMr2: FCT
-Flexi BTSFCM,
FSMr2: FDD, Flexi BTS 4082: FCM, FSP MCU
4082:_x000D_
TDD:_x000D_ FSMr3:
FSMr2: FCT
FCM, FSP MCU
FSP_x000D_
Flexi
-4082:_x000D_ BTS
FSMr2: FCM,FDD, Flexi BTS 4083:
FCM, FCT
-FSP_x000D_
TDD:_x000D_ FSMr3: FCT_x000D_ FSMr3:
FSMr2: FCT
FCM
LCR
--_x000D_ FSMr2: FCM, 4083:
LCR
--FSP_x000D_ FCM_x000D_
FSMr3: FCT_x000D_ FSMr3:
FSMr2: FCT
-4083:_x000D_ FCM_x000D_
FCT_x000D_ FSM FCM
4083:
_x000D_ FSMr3: FSMr3: FCT
-_x000D_
-4083:_x000D_
FCT, FCT FBBFCT_x000D_
FSMr2: FCM_x000D_ FSMr2:
4085:
FCT (forFCMFSMr3 only)
_x000D_
--FCM,
Flexi FSMr3:
Zone FCT_x000D_
Micro FSMr3:
FSMr3: FCT
FCT
4083:_x000D_ FSMr2:
FCT, Optif FDD, Flexi
FCM_x000D_ 4085: (for FSMr3 only)
FCM, FCT
_x000D_
Zone
--FCM, Micro
FSMr3: TDD, Flexi
FCT_x000D_ FSMr3: FCT
4085:
Zone:_x000D_ FSMr2:
FCT,
(forFCM_x000D_
OptIF
FSMr3 4085: (for
FSM FSMr3 only)
_x000D_
-Flexi FSMr3: FCT_x000D_ FSMr3: FCT
-only)_x000D_
4085: FSPBTS FDD, Flexi BTS
(for FSMr3 FCM/FCT
_x000D_
-TDD:_x000D_ FSMr3: FCT_x000D_
only)_x000D_
GNSS
4085: (for FSMr3 FCM/FCT
-_x000D_
-only)_x000D_ GNSS_x000D_
FSMr3: FCT_x000D_
GNSS
Flexi
_x000D_ Zone Micro FDD, Flexi FCM/FCT
_x000D_
-Flexi FSMr3: FCT_x000D_
Zone
GNSS
Flexi Micro
Zone
Zone TDD: FDD,
Micro
Micro _x000D_
FDD, Flexi
Flexi FCM/FCT
_x000D_
-GNSS
Zone 4082: FSP_x000D_
Micro TDD:_x000D_
Zone Micro TDD: _x000D_ FCM/FCT
-Flexi
-Zone
Zone
4083:
Flexi
4082: Zone Micro
Flexi ZoneFDD,
Micro
FSP_x000D_
Flexi
Micro
BTS
Antenna
BTS_x000D_ Micro TDD: _x000D_
Line Antenna Line, ALD
-- 4083: 4082: Flexi Zone Micro
-BTS_x000D_
Antenna 4085: FSP_x000D_
Flexi
LineZone Micro ALD
-BTS 4083: Flexi Zone Micro
-BTS_x000D_
Flexi 4085:
BTS Flexi Zone
FDD, Micro
Flexi BTS FCT
BTS
TDD:_x000D_
- 4085:FCT
FCM, Flexi Zone Micro
-BTS FCT_x000D_
FBBC
_x000D_ #N/A
Flexi BTS ZoneFDD,MicroFlexi
FDD,BTS
Flexi #N/A
Zone
TDD:_x000D_ Micro
Flexi BTS FDD, Flexi BTS TDD:_x000D_ FCM/FCT
-TDD:_x000D_ FSP
FCM_x000D_
GNSS
-- FCT_x000D_ #N/A
FCM_x000D_
_x000D_
Flexi
- FCT_x000D_ BTS FDD, Flexi BTS FSP
Flexi
LCR Zone Micro FDD, Flexi
TDD:_x000D_
_x000D_ #N/A
-Zone
Flexi MicroMicro
FSP_x000D_
Zone TDD:_x000D_
FDD, Flexi
GTP-U
-Zone FlexiMicro
ZoneTDD:_x000D_
FBB_x000D_ Micro BTS GTP-U
_x000D_
LNMME
- Flexi Zone Micro BTS LNMME
Flexi
LNADJ Zone Micro FDD, Flexi LNADJ
Zone Micro TDD:_x000D_
LNMME
- FSP LNMME
Flexi BTS FDD, Flexi BTS FSM
TDD:_x000D_
LCR LCR
- FCM_x000D_
LCR
- FCT_x000D_ LCR
_x000D_
Flexi BTS FDD, Flexi BTS FCM_x000D_
Flexi
Flexi Zone
TDD:_x000D_ BTS FDD,MicroFlexi
FDD,BTS
Flexi FSM
-Zone
TDD:_x000D_ Micro
FCM_x000D_ TDD:_x000D_
Flexi BTS
Flexi
-- FCT_x000D_ ZoneFDD, Flexi
Micro BTSBTS FCM, FCT
FCM_x000D_
TDD:_x000D_
_x000D_
Flexi
-- FCT_x000D_ BTS FDD, Flexi BTS FCM
Flexi FCM_x000D_
TDD:_x000D_ Zone Micro FDD, Flexi
_x000D_
Flexi
--Zone BTS FDD, Flexi BTS
FCT_x000D_ FCM
Flexi
TDD:_x000D_ Micro
FCM_x000D_
Zone TDD:_x000D_
Micro FDD, Flexi
_x000D_
FCM,
--Zone FlexiFCT
ZoneTDD:_x000D_
FCT_x000D_ Micro BTS #N/A
Flexi Micro
FCM_x000D_
Zone Micro FDD, Flexi
_x000D_
FCM,
-Zone FCT
FlexiMicro
ZoneTDD:_x000D_
FCT_x000D_ Micro BTS #N/A
Flexi
_x000D_
FCM, Zone
FCT Micro FDD, Flexi #N/A
-Zone
FlexiMicro
ZoneTDD:_x000D_
Micro BTS
Flexi
LCR Zone Micro FDD, Flexi LCR
-Zone
FlexiMicro
ZoneTDD:_x000D_
Micro BTS
LCR
- Flexi Zone Micro BTS LCR
LNADJ LNADJ
LNCEL #N/A
Flexi BTS FDD:_x000D_ #N/A
-LNADJ
FCM, FCT_x000D_ LNADJ
_x000D_
LNADJ
Flexi Zone Micro:_x000D_ LNADJ
-LNMME
Flexi Zone Micro BTS LNMME
LNMME LNMME
Flexi BTS FDD, Flexi BTS lcrId of the cell
TDD:_x000D_
Flexi BTS FDD, Flexi BTS FCM
LCR_x000D_
TDD:_x000D_
Flexi
_x000D_ BTS FDD, Flexi BTS FCM,FCT
-TDD:_x000D_ FCM_x000D_
Flexi
-LNADJG_x000D_ Zone MicroFlexi
BTS FDD,
FCT_x000D_ FDD,BTS
Flexi FCM,FCT
Zone
TDD:_x000D_
_x000D_
LCR Micro TDD:_x000D_ LCR
Flexi
-lcrId Zone
of the Micro
FCM_x000D_cell FDD, Flexi
Flexi
Zone
Flexi Zone
Micro
BTS Micro FDD,BTS
TDD:_x000D_
FDD, Flexi Flexi FSP, FSM
-Zone FCT_x000D_
Micro TDD:_x000D_
-Flexi
TDD:_x000D_
_x000D_ FlexiBTS
Zone Micro
FDD, Flexi BTS FCM/FCT, FSP
-- FCM FCM/FCT_x000D_
Flexi
TDD:_x000D_
FSP,FBB Zone Micro FDD, Flexi FSP
_x000D_
-Zone Micro TDD:_x000D_
FCM_x000D_
Flexi
- FCT_x000D_ Zone
FlexiBTS Micro
FDD,
Zone FDD,BTS
Flexi
Micro Flexi #N/A
Zone
TDD:_x000D_
- FSP_x000D_
Flexi Micro TDD:_x000D_
BTS FDD, Flexi BTS #N/A
-TDD:_x000D_
-Flexi FSP
FSP_x000D_
FBB_x000D_
--_x000D_ BTS FDD, Flexi BTS
FBB_x000D_ #N/A
FSP_x000D_
TDD:_x000D_
_x000D_
NE-FTM-1
-Flexi Zone Micro FDD, Flexi
FBB_x000D_ NE-FTM-1
-Flexi FSP_x000D_
Zone
Zone
_x000D_
FTM
-Zone MicroMicro
FBB_x000D_
FDD, Flexi
TDD:_x000D_ FTM
-_x000D_ Micro TDD:_x000D_
FSPZone Micro FDD, Flexi
Flexi
BFDGRP
-Zone
FSPMicro TDD:_x000D_ BFDGRP
Flexi
PPTT Zone Micro FDD, Flexi PPTT
-Zone
FSPMicro TDD:_x000D_
-ETHLK
FSP ETHLK
IKESA IKESA
ETHLK ETHLK
STPG STPG
STPG STPG
CERTH CERTH
ETHLK ETHLK
ETHLK ETHLK
ETHLK ETHLK
ETHLK ETHLK
PPTT PPTT
PPTT PPTT
PPTT PPTT
PPTT PPTT
UNIT UNIT
OAMMA, OAMMD OAMMA, OAMMD
OAMMEP OAMMEP
NE-FTM-1 NE-FTM-1
CERTH CERTH
BFD BFD
BFD BFD
ETHLK ETHLK
TWAMP TWAMP
TWAMP TWAMP
INTP INTP
CERTH CERTH
CERTH CERTH
FTM FTM
STPG STPG
STPG STPG
TOPF TOPF
IEIF,IVIF_x000D_ IEIF,IVIF_x000D_
UNIT UNIT
IPSECC IPSECC
IPNO IPNO
IPSECC #N/A
Meaning
The temperature of a unit exceeds the threshold value.
A software update in the module or submodule has failed.
Flexi BTS FDD:_x000D_
The reference
Connection to afrequency
module that thatbelongs
the BTStomaster the BTS clock receives has
configuration haschanged
been lost.by about 0.2 ppm or more (which equals the change
_x000D_
Failure
The cause wasofdetected
the alarm when
might eNodeB
be:_x000D_O&M system presented available FSPs to Cplane software in order to map FSPs to cell. Th
_x000D_
FCM/FSP synchronization has failed.
1. The reference
Incompatible frequency
software has beenhas changed
detected.because of a fault in the transmission network synchronization (which in turn is cause
reference synchronization. The alarm can also be activated if the faulty reference synchronization is corrected and there is, aga
The file system format of the downloaded software is incompatible with the file system format used in the BTS.
_x000D_
2. TheBTS
Flexi reference
FDD, Flexi frequency fluctuates continuously because of a significant amount of jitter/wander in the transmission network
BTS TDD:_x000D_
T
TheG.823/824/825._x000D_
The BTS is unable to obtain acannot
SNTP time or GPS time file frombe the
fetched within(error
file server the timein FTP limit._x000D_
open or FTP get). The file server is down, the file is missing,
_x000D_
occured.
The
Flexi downloaded
3. If the
ZoneBTS-integrated
Micro FDD, SW isFlexi
corrupted
transport
Zonepart or isreceives
Micro incorrectly theformed.
TDD:_x000D_ synchronization information via the 2.048 MHz synchronization input (extern
case._x000D_
UTC time source is not
Flexi BTS FDD, Flexi BTS TDD:_x000D_available in the BTS.
_x000D_
Setting
A module non-active
is blocked SW block(s)
with BTS Site thatManager.
contain a_x000D_
new SW version as active has failed during new SW version activation._x000D_
4. There
_x000D_
The is
purpose an equipment
is to avoid fault
fault in the BTS. The
indications that might equipment
be raised fault is, however,
during not the
the module most common
maintenance task.reason.
_x000D_ Normally, the reason
Flexi
_x000D_
Flexi BTS
Zone FDD,
Micro Flexi
FDD, BTS
Flexi TDD:_x000D_
Zone Micro TDD:_x000D_
The
The fault
fault is raisedthat
notifies onlythe
when
user anhas LTE systemthe
blocked module
cell (FSM)
with BTS isSite
theManager._x000D_
master agent of the blocked radio module (FR) or when an LT
Flexi
The
blocked Zone
SW
BTS isMicro
update
sharedblocked toFDD,
the Flexi
BTS
with
(WCDMA/LTE) BTS Zone
hasSite
radioMicro
failed. The
Manager. TDD:_x000D_
module, error
The might
purpose
fault:1931 beiscaused
is to avoid
raised. by fault
a module reset during
indications the SW
that might update,
be raised a hardware
during problem
a BTS mainten
_x000D_
The reference frequency that the BTS master clock receives has experienced a significant change during the measurement per
Flexi Zone
Flexi BTS FDD, MicroFlexi FDD,BTS Flexi TDD:_x000D_
Zone Micro TDD:_x000D_
_x000D_
The fault informs thehasoperator that BTS
the BTS isManager.
trying
The
The user
unit
cause has
or blocked
module
of the alarmthe beencelltested
might with Sitethe
during BTS to correct a
power-on fault
self testsituation
(POST)by andperforming a recovery
a failure has reset to a unit, the site,
been detected.
In case of an RF module resetbe:_x000D_
in RF chaining configuration, the BTS also resets all RF modules that are further in the chain._x0
_x000D_
A unit cannot be identified by its product code or by its physical device address (object ID).
_x000D_
1. TheZone
Flexi reference
A non-supported Micro frequency
FDD,has
unit Flexi has
beenZone changed because
Micro TDD:_x000D_
detected in the System of a fault
Module.in the transmission
Typically, networkwhen
this happens synchronization (which in
a new unit version is turn is cause
installed whil
reference
The BTS synchronization.
tries to recover a The
fault alarm
situationcan byalso be activated
performing a site if the
reset. faulty reference synchronization is corrected and there is, aga
A flash memory operation failure has occurred. If this alarm continuously appears, the flash chip might be broken.
_x000D_
2. The reference
A flash memory operation frequencyfailure
fluctuates continuously
has occurred. because
If this of a significant
alarm continuously amountthe
appears, of flash
jitter/wander in the
chip might be transmission
broken. network
T G.823/824/825._x000D_
A flash memory operation failure has occurred. If this alarm continuously appears, the flash chip might be broken.
_x000D_
A flash
3. If thememory operation
BTS integrated failure has
transport partoccurred.
receives the If this alarm continuously
synchronization appears,
information via the
the flash
2.048chipMHzmight be broken. input (extern
synchronization
case._x000D_
A flash memory operation failure has occurred. If this alarm continuously appears, the flash chip might be broken.
_x000D_
Synchronization between the FCM/FCT and FSP is lost.
4. There is an equipment fault in the BTS. The equipment fault is, however, not the most common reason. Normally, the reason
Flexi BTS FDD, Flexi BTS TDD:_x000D_
The
Antennaoperating
(RP3)system (OSE)the
link is down: goes into the error
transmitter handlerdrops
or receiver with a fromfatalsynchronization.
status. The cause might be, for example, an out of memory
_x000D_
The
If onlystate
oneofFSP the inexternal
the BTS alarm line shows
generates that an
this fault, external
there alarm is notified._x000D_
is malfunction in one of the FSP submodules. If all FSPs generate this fau
_x000D_
_x000D_
The state of the external alarm line shows that an external alarm is notified._x000D_
The
Flexi user
Zonespecifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
_x000D_
The state ofMicro FDD,
the external Flexi
alarmZone lineMicro
shows TDD:_x000D_
that an external alarm is notified._x000D_
The
_x000D_operating
user system
specifies, (OSE)
during goes into the the
commissioning, error handler
alarm with aseverity,
number, fatal status. The cause
and polarity thatmight be, for
indicates theexample,
fault. an out of memory
The state of the external alarm line shows that an external alarm is notified._x000D_
The
_x000D_user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
The state of the external alarm line shows that an external alarm is notified._x000D_
The
_x000D_user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
The state of the external alarm line shows that an external alarm is notified._x000D_
The
_x000D_user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
The state of the external alarm line shows that an external alarm is notified._x000D_
The
_x000D_user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
The state of the external alarm line shows that an external alarm is notified._x000D_
The
_x000D_user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
The state of the external alarm line shows that an external alarm is notified._x000D_
The
_x000D_user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
The state of the external alarm line shows that an external alarm is notified._x000D_
The
_x000D_user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
The state of the external alarm line shows that an external alarm is notified._x000D_
The
_x000D_user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
The state of the external alarm line shows that an external alarm is notified._x000D_
The
_x000D_user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
The state of the external alarm line shows that an external alarm is notified._x000D_
The
_x000D_user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
The state of the external alarm line shows that an external alarm is notified._x000D_
The
_x000D_user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
The state of the external alarm line shows that an external alarm is notified._x000D_
The
_x000D_user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
The state of the external alarm line shows that an external alarm is notified._x000D_
The
_x000D_user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
The state of the external alarm line shows that an external alarm is notified._x000D_
The
_x000D_user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
The user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
The state of the external alarm line shows that an external alarm is notified._x000D_
_x000D_
The state of the external alarm line shows that an external alarm is notified._x000D_
The user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
_x000D_
The state of the external alarm line shows that an external alarm is notified._x000D_
The user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
_x000D_
The state of the external alarm line shows that an external alarm is notified._x000D_
The user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
_x000D_
The state of the external alarm line shows that an external alarm is notified._x000D_
The user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
_x000D_
The state of the external alarm line shows that an external alarm is notified._x000D_
The user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
_x000D_
The state of the external alarm line shows that an external alarm is notified._x000D_
The user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
_x000D_
The state of the external alarm line shows that an external alarm is notified._x000D_
The user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
_x000D_
The state of the external alarm line shows that an external alarm is notified._x000D_
The user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
_x000D_
Software download to FSP, DSP, or FR has failed.
The user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
Communication with an application has failed. It has not replied to the message that has been sent/resent to it.
Flexi BTS FDD, Flexi BTS TDD:_x000D_
The
The radio channel
baseband busthat has configuration
related been requested in the
of <x> commissioning
was rejected by the fileHW
is not
SW,supported supported
DSP, or RF SW. by the detected BTS radio or M
_x000D_
The
Flexibaseband
Zone Microbus synchronization
FDD, toward
Flexi Zone Micro <x> has failed.
TDD:_x000D_
The requested channel
reference clock in the start-up
monitoring phase is
has detected not acceptable
a loss of signal infor
thethe BTS hardware,
reference receivedbecause
from theof an incorrect frequency band a
FT.
The OCXO warm-up takes too long and the OCXO does not become active within a period of eight minutes from power-on. The
Flexi BTS FDD, Flexi BTS TDD: _x000D_
The
The OCXO adjustment
output signal of thearea
OXCO is reaching
is missingitsand
limitthe
value. The DAC
FCM/FCT worddeliver
cannot value the
of the OCXO
30.72 MHzisSystem
lower than or required
Clock equal to the Min.Ocxo
by the other
_x000D_
A request
Flexi ZonetoMicro
retrieve
FDD,theFlexi
public IP address
Zone information of the FCM/FCT from the FTM has failed.
Micro TDD:_x000D_
Master
The clock frequency
temperature is tuned
measured fromto within
the sensor5%specified
of its minimum or maximum offset. Flexi
in "Temp.Cold.Start.Sensor" Zone Micro
(= FSP)is BTS "Temp.Cold.Start.Limit"_
less than does not use DAC tuning
The BTS cannot start properly because the FSPs cannot be powered up at conditions that are too cold.
The Masthead Amplifier (MHA) does not work properly. However, the system cannot determine the impact on the RX signal leve
The Masthead Amplifier (MHA) does not work properly. Because of the low current drawn by the device, it is assumed that it do
To
Thestabilize the situation
Radio Module (60W and
RRH) keep the RX
or Filter (allsignal onhas
others) the detected
required level, there is
overcurrent onathe
need to switch
antenna line.DC
Thepower off for
antenna linealarming MHA
might be dam
Module.
Flexi BTS FDD, Flexi BTS TDD:_x000D_
The
The VSWR
VSWR valuevalue exceeds
exceeds thethe level
level defined
defined as as criterion
criterion for
for VSWR
VSWR Major
Minor event.
event. The
The impedance
impedance of of the
the antenna
antenna line
line does
does not
not ma
ma
_x000D_
The Radio Module has detected a malfunction
Flexi Zone Micro FDD, Flexi Zone Micro TDD:_x000D_ of an internal LNA unit.
detected
The Radio VSWR
Module is exceeds
unable tothetunedefined threshold.
to a required The antenna
sub-band properlyand/or antenna feed line is disconnected, mismatched, or da
(tuning_x000D_
failure), or another major failure has been detected
The Radio Module has detected an internal filter failure. by the Radio Module_x000D_
(unit faulty).
1845: TILT is not configured._x000D_
Others:
1845: TILTAntenna
is not tilting is not possible or might function incorrectly.
configured._x000D_
Others:
1845: TILTAntenna
is not tilting is not possible or might function incorrectly.
configured._x000D_
Others:
1845: TILTAntenna
is not tilting is not possible or might function incorrectly.
configured._x000D_
Others:
1845: Antenna
TILT is not tilting is not possible or might function incorrectly.
configured._x000D_
Others:
A hardware failure has is
Antenna tilting not reported
been possible orby might function
ALD (RET, MHA)incorrectly.
or by RFSW (Filter) ._x000D_
Note: Filter in Radio Module is considered as ALD even
The unit is in download mode state. This fault is returned when an though it isunsupported
an internal part of FR. occurs in download mode.
procedure
A corrupted SW file in the FLASH has been detected._x000D_
The
The unit cannot complete
synchronization set-upthe start-up.
between a BTS configured as slave and a BTS working as master has failed during BTS startup. A
The heater control connection of the FSM is faulty, there is no heater, or the heater is faulty.
During BTS startup or BTS recomissioning, the BTSOAM has detected that there are not enough: _x000D_
a) radioinresources
A fault or _x000D_
the Masthead Amplifier (MHA) is detected. MHA functionality is degraded. The real impact cannot be determined.
b) FSP resources or_x000D_
A fault in the Masthead Amplifier
c) cables between the system (MHA)and
module is detected.
the radio MHA is not
module working._x000D_
or cables between the extension baseband module (FBBx) and the
The device is not working properly, the configuration is not valid, or a given parameter is incorrect.
The device is not working properly, the configuration is not valid, or a given parameter is incorrect.
The device is not working properly, the configuration is not valid, or a given parameter is incorrect.
The device is not working properly, the configuration is not valid, or a given parameter is incorrect.
SRAM memory operation failure has occurred. If this fault appears continuously, the SRAM chip might be broken.
SRAM memory operation failure has occurred. If this fault appears continuously, the SRAM chip might be broken.
The reference clock monitoring has detected a loss of PPS signal in the reference received from the GPS receiver.
The reference clock monitoring has detected a loss of 2.048 MHz signal received from an external reference source, connected
The RF module configuration has failed because of HW or SW fault.
A critical configuration file is missing from the RF Module.
The RF Module SW detected that a non-critical configuration file is missing.
The System Module clock reference differs from the RF Module clock.
The baseband bus between the System Module and RF Module is out of synchronization.
The RF Module baseband bus is configured incorrectly.
There is an error in the baseband or optical bus.
The RF module's TX path is not usable.
Flexi BTS FDD, Flexi BTS TDD:_x000D_
The
The TX
RF output
Modulepower adjustment
filter has measured failed._x000D_
too low TX power.
_x000D_
Flexi
Flexi BTS
ZoneFDD,
MicroFlexi
FDD,BTS TDD:_x000D_
Flexi Zone Micro TDD:_x000D_
The
CLGC RF module's
The RFconvergence RX RF
module is outfailed, synthesizer
targetiscannot
gainbecause
of order not
of alocked._x000D_
be achieved.
software or hardware fault.
_x000D_
The power
Flexi supplyFDD,
Zone Micro supervision has Micro
Flexi Zone detected an overvoltage, undervoltage, or overcurrent in the RF module.
TDD:_x000D_
The RX path insignal
feedback the FR to module is faulty.
predistortion is too weak or missing. The TX performance is degraded.
The TX signal adjustment fails.
During RF startup: The temperature inside the RF Module is too low. Heating of module is ongoing. Wait until the alarm is cance
_x000D_
The permanent memory in the RF module is corrupted and the module product code or serial number is missing, or the module
During RF runtime: The temperature inside the RF module is going too low. Problem might occur.
The RF Module SW detected conflicting or corrupted configuration data.
An RF module's power-on self-test has failed at start-up.
The RF module has lost lock to the incoming clock.
The highest temperature exceeds the power decrease limit in the RF module.
The FPGA software update has failed in RF module.
The fault is detected in a radio sharing configuration wherein a WCDMA FSM is_x000D_
the
Themaster FSM and
radio module an LTE
cannot FSMthe
identify is the
fanslave FSM.
type that is The
usedfault means
or the fan isthat
notFR is blocked._x000D_
installed at all.
In case the LTE FSM is the master FSM or the LTE system module shares CPRI/Ir radio module with the SCDMA system modu
Fan(s) are not running in RF module.
Fan(s) in RF module are rotating slower than requested.
Fan(s) in RF module rotate faster than required.
The validated RF module temperature is higher than the predefined maximum allowed value.
The validated RF sensor temperature is greater than or equal to the predefined value on the unit property file.
The validated temperature of any PA sensor in RF module is higher than or equal to the predefined value on unit property file.
Increased bit error rate has been detected on the optical link to the radio module, which results in sporadical LCV errors in dow
Abnormally high bit error rate has been detected on the optical link to the radio module, which results in permanent baseband p
The Tx in the RF module has been switched off to protect the radio module hardware, which might be damaged because of hig
The FR module detected permanent RP3 routing collisions in either downlink (TX), or uplink (RX) transmission directions.
The Small Form Factor Pluggable (SFP) malfunction has occurred (fault 2000), or the SFP module is not physically present (the
The Small Form Factor Pluggable (SFP) malfunction has occurred (fault 2000), or the SFP module is not physically present (the
The incoming optical signal to the Small Form Factor Pluggable (SFP) is missing, too weak, or the fiber cable has been detache
_x000D_
The data is faulty because there is interference in the fiber cable._x000D_
The connection between the System Module and the RF Module is broken OR connection between the Baseband Module (for e
_x000D_
The RP3 channel has lost the frame synchronization state that it had achieved.
A physical connection failure has occurred between the optical interface and the summing function (for example, caused by bad
The RP3 or Ethernet buffering is not working, and the buffer becomes full. The optical device is malfunctioning. The fault might
FaultRP3
The 2006ormay be detected
Ethernet in is
buffering Flexi
not BTS TDDand
working, only._x000D_
the buffer becomes full. The optical device is malfunctioning. The fault might
Fault
Fault 2007
2006 may
may bebe detected
detected inin Flexi
Flexi BTS FDD only._x000D_
BTS TDD only._x000D_
Fault
Fault 2010
2007 may
may bebe detected
detected both
in Flexiin Flexi BTS FDD
BTS FDD and TDD.
only._x000D_
Fault 2010 may be detected both in Flexi BTS FDD and TDD.
The RP3 or Ethernet buffering is not working, and the buffer becomes full. The optical device is malfunctioning. The fault might
Fault 2006 may
The control messagebe detected in Flexi BTS
traffic between TDD only._x000D_
the modules is malfunctioning.
Fault 2007 may be detected in Flexi BTS FDD only._x000D_
The
Faultsynchronization
2010 may be detected to the clock bothcontrol
in Flexiunit BTS frame
FDDpulse
and TDD.that has been achieved earlier differs from the currently received fram
The master frame in the received baseband bus frame is not in the correct place related to the internally-generated master fram
A decoding error has been detected in the baseband internal link. The data packet is lost or the content is corrupted._x000D_
_x000D_
There is a baseband bus address mismatch in the summing. There are two possible causes:_x000D_
This
_x000D_ situation is also triggered when the links do not synchronize with each other.
The frame alignment has been lost or the frame burst has a CRC error when the_x000D_
1. A configuration
System Module is error
working (twoasdifferent
a lost baseband units functioning)
synchronization - after an acknowledgement, the fault returns._x000D_
The
_x000D_frame alignment has been or the frame slave system
burst has a CRCmodule._x000D_
error when the_x000D_
System
2. Module is working
on the as
bus a
- synchronization
The clock crossing buffer underflow or overflow in the RX block and data
Data corruption appears once whenslave system
unsynchronized module._x000D_ is sent by
the received datathemight
baseband.
be not valid. The fault is an indicati
The SW update to the BTS has failed or the BTS SW is corrupted.
The baseband bus message multiplexing slot for the message cannot be fulfilled.
An interrupt is generated if a message does not get routed._x000D_
_x000D_
Summing checks the headers of the messages to be summed. If the header is not an allowed type, summing is not performed a
This is considered normal when Faradays are starting up and RP3 sync is done.
The transmitter has detected an RP3 message from a summing coincident with a transmission rule.
The transmitter has detected more data coming from a summing than the current link rate can support.
The BTS has detected an abnormal operation or a failure in the internal functionality of the System Module._x000D_
_x000D_
The BTS has detected an abnormal operation or a failure in the BTS replaceable_x000D_
baseband
The BTS has unit.detected an abnormal operation or a failure in the internal functionality of the RF Module.
A fan, all the fans or more than one fan in the same fan group are rotating slower or faster than requested, are not rotating at al
There is a compatibility problem in the BTS HW/SW versions or the HW/HW configuration. Another possibility is that there is a m
Flexi BTS FDD, Flexi BTS TDD:_x000D_
This
Flexi BTSBTS fault
FDD,indication
Flexi BTSisTDD:_x000D_
generated if the reference clock monitoring function of the BTS does not receive the configured sync
_x000D_
Too many cellsdetected
are commissioned to BTS. _x000D_
The BTS has
Background information:_x000D_an RF Module that cannot be put into use without a BTS reset._x000D_
_x000D_
_x000D_
There
A
Flexi is a failure
TX Zone
path fixed
Microsynchronization
has
FDD, occurred,
Flexi Zone priority
which list in in
results thethe
FlexiBTS:_x000D_
Multiple Input Multiple Output (MIMO) functionality not being operational or
An FSP overheat
_x000D_ has occurred. In Micro
order TDD:_x000D_
to put the card back into use, the FSP must be restored to normal temperature and the
More
The power level that is defined in the RNW part of the SCForfile
_x000D_ LNCELs than the supported maximum is configured tooismany LCRs areby
not supported commissioned
the HW. to one RF Module._x000D_
-Priority 1: PPS (Pulse Per Second) signal connected to the Synchronization Input interface (Sync In) of the System Module. No
The
_x000D_BTS has detected a ancommunication
FSP Module that cannotwith
problem be the
put GPSinto use without a BTS reset.
receiver._x000D_
_x000D_
-Priority
The 2: external 2.048MHz
baseband-bus-related SRIO signal connectedfor
configuration to Faraday
the Synccore In interface
has been (NOTE:
rejected Notbyused in phaseSW.
the platform synchronization mode)._x00
The
_x000D_fault is ignored until the GPS receiver has reached commissioned state.
Flexi BTS FDD, Flexi BTS TDD:_x000D_
-Priority
The 3: the reference signal coming from the
lostintegrated transmission unit (FTM) (NOTE: Only ToP is used in phase synchron
The connection
_x000D_internal maximum to the FSP transferor DSPunit has
(MTU) been or the submodule
configuration has failed on reports
FCM,an FSP,error
or situation._x000D_
FBB.
_x000D_
Normally,
4026: all the FlexiBTS
EFaultId_TogglingAlFault sources
Flexi Zone Micro FDD, Flexi Zone Micro TDD:_x000D_ is are
used not
to in
informuse at
the the same
operator time
that (it depends
another_x000D_ on the network planning and BTS configuration).
generate
BTS fault
The connection
Flexi a fault.
(the
BTS FDD, to During
original
FlexitheBTS runtime
fault) is
DSPTDD:_x000D_ operation,
toggling._x000D_
module has been lost. the BTS fault functionality runs autonomously - notices also added/vanished source
_x000D_
The
The alarm that
commissioning is related
file to the
download original fault is suppressed and the new
has been started neither from BTS Site Manager, nor from NetActalarm, which is related to fault 4026:autoconfiguration.
during EFaultId_TogglingA
Flexi
The
_x000D_ BTS FDD,
source for Flexi
the FTM BTS TDD:_x000D_
(which is the priority 3 source for the FlexiBTS) can be TDM interface signal (e.g. E1, T1...), physical la
_x000D_
The BTSOAM
commissioning file isrelated
corrupted or original
an incorrect SCF file hasif been detected during BTSdefined
startup as isfollows:_x000D_
priority
Toggling
The
Flexi selection
alarms has is
that not
are
noticedfixed but
that user-selectable.
to
the
Zone Micro FDD, Flexi Zone Micro TDD:_x000D_ the
connected Furthermore,
faults
radio are
unit suppressed
already a signal
has untillisted
another the in the
toggling
radio FTM
master references
condition is not received,
cleared._x000D_
apart from the FlexiaSystem
BASE SM
_x000D_
_x000D_
The
A
1. commissioning
module initialization
Commissioning filehas
data: download
the has been file
failed._x000D_ started neither from BTS Site Manager, nor from NetAct during autoconfiguration. A
Flexi
The
_x000D_ Zone Micro
severity of this FDD,BTSFlexi faultcommissioning
Zone
is theMicro as theisseverity
sameTDD:_x000D_ corrupted or aoriginal_x000D_
of the parameter has a missing or incorrect value._x000D_
_x000D_
The
The Radio
GPSBTS
toggling Module
source
fault. (ifhas detected that
provisioned) is thethe requested
highest frequency
priority reference is source.
not compatible
The GPS with the capabilities
source is considered offered
to bebyunusable
the Radio asModu
a ref
2.
The RNW
BTS data: "RNW
supports a has
ToP
Flexi BTS FDD, Flexi BTS TDD:_x000D_ wrong
or SyncE format",
reference"RNW could
source not
that be
have parsed", "RNW
configurable has wrong
priorities schema",
relative to "Validation
each other failed
through due
the to incom
"synchro
_x000D_
The cell configuration
An alarm
_x000D_ message hasisbeen not officially
received supported.
from the antenna Too many cells
line. The are assigned
antenna linetoisthe Tx group of the radio module._x000D_
faulty.
_x000D_
Flexi
An
Flexi Zone
alarm Micro
Micro FDD,
Zonemessage has Flexi
FDD, beenZone
Flexi received
Zone Micro
Micro TDD:_x000D_
from the antenna line device. The antenna line operation is degraded.
TDD:_x000D_
The commissioning
cell configuration
The Radio file
Module hasisdetected is missing,
not officially or an incorrect
supported. condition
an overcurrent SCF
The fileon
configuredhas been
RS485 detected
cell ,IUANT
which has during
antenna
port._x000D_ BTSpaths
startup as follows:_x000D_
in the resourceList antenna path
_x000D_
Some antenna line device is causing overload. Antenna line devices powered by the RS485 IUANT are out of order because of
The highest validated
1. Commissioning data: temperature
the commissioning value onfile theisFSP boardorexceeds
missing a parameter the threshold
has a missing value.or incorrect value._x000D_
-_x000D_
The mutual length difference of the parallel RP3-01/CPRI links toward one radio module is too large (more than 60 meters in O
-2.
FanRNW
RF data:has
sharing
delivered "RNW
by been not
unknown found",
disabledvendor "RNW
with has wrong
is master
detected WCDMA format",
(system because
module "RNW the could
mutual
hardware not be or
length
rel.2) parsed",
difference
_x000D_ "RNW has wrong
between schema",
the cables "Validation
of the WCDMA
the fandistance
A long speed is(high too low for successful
latency) between detection.
the FSM and Another
antenna detection
has been attempt occurs
detected butafter
the the fan test timer
Distributed expireshas
Site feature (system modu
not been e
_x000D_
The
Faulttemperature
is reported both on the forFSP board has
operational andexceeded
non-operationalthe criticalfansthreshold
in hardware value. detection phase only.
Fan(s) are not running although the temperature (indicated by Tcontrol) is higher than the value of the T.start parameter in the B
Fan(s) speed is deviating too much from the requested control.
Fan(s) are running faster than requested.
4082:_x000D_
The source unit has reached the maximum number of reset retries, that is, the source unit cannot successfully finish start-up af
4082:_x000D_
If
TheBTS O&Munit
source hashasdetected
reached thatthe
themaximum
BTS can number start withofpreviously-active
reset retries, thatSW version
is, the source- BTS
unitO&M processed
cannot consistent
successfully fallbackaf
finish start-up a
4082:_x000D_
1. previously-active SW version is running instart
all HW units in the BTS and_x000D_
If
TheBTS O&M
source has detected that the BTS can with previously-active SW version - BTS O&M processed consistent fallback a
2.
File
1. the BTS isunit
system up has
access
previously-active
reached
andoperations
SWrunning.
version
the
like
is
maximum
_x000D_ file system
running in
number
allmounting
HW
of reset
units
retries,
orinfile
theopening
BTS
thathave
is, the
and_x000D_
source unit cannot successfully finish start-up af
failed.
If BTS O&M has detected that the BTS can start with previously-active SW version - BTS O&M processed consistent fallback a
Otherwise:_x000D_
2.
The
1. the BTSRadio
Flexi is up Module
previously-active and running. _x000D_
has detected low downlink carrier ininput power from the Flexi System Module.
1. previously-active SW
Otherwise:_x000D_ SW version
version is is running
not running in allinHW all HWunitsunits the
in BTS
BTS and_x000D_
and,_x000D_
2.
2. the
During
the BTS
BTS is
reset,
is up
the
not and
BTS
up running.
andhasrunning_x000D_
detected that an SW
(recovery RF module
update connected
is still to the system module is affected by a power cycle failure and
supported)._x000D_
1. previously-active SW version is not running in all HW units in BTS and,_x000D_
Otherwise:_x000D_
_x000D_
The
2. summing
the BTS is not service
up SW
anddefault configuration
running has
SWinfailed.
1. previously-active
_x000D_ version is(recovery
not running update
all HWisunitsstill supported)._x000D_
in BTS and,_x000D_
_x000D_
1.The
2. the master
BTS is system
not up module
and runninghas lost optical
(recovery SW connection
update is to the
still peer system module._x000D_
supported)._x000D_
4083:_x000D_
_x000D_
2.In BTS configuration where one system module provides PPS synchronization slavesignalsystem
to another system module (sync hub co
_x000D_
Synchronization
The source is lost
unitmodule
has when theSW
requested system
fallback module
because is working as a synchronization
of a critical problem that has occurred module.
during This
start-up usually
after indicates
the SW updateth
4083:_x000D_
master
_x000D_ system does not work, that is, it is in reset state or powered off.
_x000D_
The
The fault
source indicates
unit haspoor GPS antenna
requested SW fallback installation.
because of a critical problem that has occurred during start-up after the SW update
4083:_x000D_
If BTS O&M has detected that the BTS can start with previously-active SW version - BTS O&M processed consistent fallback a
_x000D_
The source
The GPS receiver
unit hasis requested
running a site/self
SW survey.
fallback because of a critical problem that has occurred during start-up after the SW update
1.
If previously-active
BTS O&M SW version
has detected is running
thatstored
the BTS canin all HW
start withunits in the BTS
previously-active and_x000D_
SW version - BTS O&M processed consistent fallback a
_x000D_
There
2. the is no accurate
BTS is up andSW position
running. _x000D_ in the EEPROM.
1.
If previously-active
BTS O&M has detected version is running
that position
the BTSbut instart
canhas all HW withunits in the BTS and_x000D_
previously-active SW version - BTS O&M processed consistent fallback a
Otherwise:_x000D_
The
2. receiver
the BTS is is
upused
and in stored
running. _x000D_ been moved to a new position after that.
1.
1. previously-active
previously-active SW version
SWdetected
version is is running
notonerunningin all HW
in all units in the
HW unitssegments BTS
in the BTSand_x000D_
and,_x000D_
Otherwise:_x000D_
The
2. theGPS
the BTSreceiver
is not
up andhas running. that
_x000D_ or more EEPROM have been found to be corrupted at reset and had to be s
2.
1. BTS is
previously-active up SW
and running
version is(recovery
not running SWinupdateall HW isunits
still supported)._x000D_
in the BTS and,_x000D_
Otherwise:_x000D_
Feeding voltage is disabled for the selected Antenna Line.
_x000D_
2.
1. the BTS is not up SW
previously-active andversion
runningis(recovery
nottherunning SWinupdate HWisunits
allAntenna still supported)._x000D_
in the BTS and,_x000D_
_x000D_
The HDLC link has been
_x000D_ disabled for reporting Line or IUANT port.
2. the BTS
4085:_x000D_ is not up and running (recovery SW update is still supported)._x000D_
_x000D_
SW file validation against its signature has failed.
_x000D_
Transport
4085:_x000D_ SW on the source unit has indicated the need for software fallback._x000D_
_x000D_
Phase
If BTS O&M synchronization
has hasthat
been commissioned at thepreviously-active
btsSyncMode, but SWPPS and/or ToPO&M
reference clock has not become avai
Transport
4085:_x000D_ SW ondetected
the source thehas
unit BTS can startthe
indicated withneed version
for software fallback._x000D_ - BTS processed consistent fallback a
1.
If previously-active
Shared
BTS O&M OptIFhas mode SW version
cannotthat
detected be theis running
read/changed
BTS in all
can start HW
from/in
with units
FBBC in the
card.BTS
previously-active and_x000D_
SW version - BTS O&M processed consistent fallback a
Transport
2. the BTS SW onand
the running.
is occurred
up source unit has
_x000D_ indicated the need for software fallback._x000D_
1.
A
If previously-active
has SW inversion
the is running
connection to in
theall HW
configuredunits in
BTS O&M has detected that the BTS can start with previously-active SW versionManagement
failure the
Real-timeBTS and_x000D_
Performance (RTPM) entity,
- BTS O&M processed for example,
consistent the
fallback a
Otherwise:_x000D_
2. the BTS is up and running. _x000D_
1.
TRS
1. previously-active
IP configuring SW
or version is
re-configuring running
by RROMin all HW
has units
failed.
previously-active SW version is not running in all HW units in the BTS and,_x000D_ in the BTS and_x000D_
Otherwise:_x000D_
2. the BTS is
2. the
External
1. BTS is up
notand
GPS/GNSS
previously-active up SWrunning.
and running
receiver
version
_x000D_
is(recovery
module not has
running SWin
lost update
the HWisunits
allsatellite still supported).
visibility
in theand
BTSand is currently operating in holdover mode.
and,_x000D_
Otherwise:_x000D_
2.
The
1. the BTS is not
configured PHICH
previously-active up and running
SWtransmission (recovery
version is notpower running SW
boost update
cannot
in all is
HW unitsstill supported).
be applied either
in the BTS partly or at all because of a lack of remaining power
and,_x000D_
2. the
The RIPBTS is not upInterference
(Received and runningPower) (recovery valueSWper update
Physicalis still supported).
Resource Block (PRB) of the cell for UL subframes exceeds the pre
In GTP-U supervision, a network element did not respond to the GTP-U: Echo Request message within time.
The transport path (SCTP) for connection to MME is broken. This might be because of an unplugged cable to MME. There is no
The transport path (SCTP) for connection to an adjacent BTS is broken. This might be because of an unplugged cable to the ad
One of the transport paths (SCTP) in SCTP connection to MME has failed. Only applicable when SCTP multi-homing is support
There was an opening, reading, or file content problem with a radio network_x000D_
configuration
A BTS raises file thisat theifBTS
fault startup or at
it experiences activationinofinternal
a problem delta configuration_x000D_
configuration_x000D_
file.
data BTS The detected
distribution problem
(cellfault
setup) canto be a file
C- and U-Planehandling problem
SW components. (for example,_x000D_
The raises this if it experiences
open, read, and write operations fail) as well as a content problems a problem in internal configuration_x000D_
(for example,_x000D_
data
nofailure
A distribution
valid RAML2.1
has occurred (cell setup)
format). to C-Plane and U-Plane SW components.
in the trace connection between the BTS and the iOMS or a third party tool._x000D_
_x000D_
There was an opening, reading, or file content problem with a BTS vendor-specific file at BTS startup._x000D_
The
A failure faulthas
is also detected
occurred when
during a vendor-specific fileofis trace
activation/deactivation missing.session (subscriber trace, cell trace, or interface trace session)._x0
_x000D_
The BTS has encountered a few possibly misconfigured PLMNs, which cannot be used by the BTS for accepting calls from new
In
_x000D_ case of subscriber trace, the possible reasons are:_x000D_
This
-These Thealarm indicates
Subscriber Tracethatfeature
the maximumis not numberatofthe
enabled LNADJ and/or LNADJL objects was exceeded in the eNB and that the new o
PLMNs that are considered misconfigured by BTS._x000D_
the BTS are:_x000D_
-- The
This Id used
alarm
currently for the that
indicates
configured subscriber
at the BTStrace
a WCDMA session
for neighbor
one or more is already
cell, which in is use
cells_x000D_ for another
reported by an UE active
via subscriber
ANR specific trace session._x000D_
measurements could not be stor
-This
form The
- served number
of:_x000D_ of
byindicates
alarm subscriber
one or more that MMEs trace
a WCDMA sessions
and therefore at the BTS has
currentlywhich
neighbor relation, reached
broadcast the maximum
by BTS's
is reported by a cells. number
However,
UE via of subscriber trace
none ofmeasurements,
ANR specific sessions
these PLMNs have couldsupporte
serving
not be
-neighbor
"A Handover
neighbour
_x000D_ cellat the
WCDMA BTS is
cell
in the form:_x000D_ongoing
which for
is the
reportedUE to
by be
an traced._x000D_
UE due to activated ANR feature(s) could not be stored because the maximu
This
_x000D_
%d, alarm indicates
ecgiPlmnId: that
MNC= %s, a WCDMA neighbor relation, which is reported by a UE because of activated UTRAN ANR feature:_x0
All
"LTE
-In previously
cell registered
ECGI{ecgiAdjEnbId UEsMCC= in
=onethese
%d, %d})"._x000D_
PLMNs =
ofecgiLcrId remain
%d, unaffected.
ecgiPlmnId = { %d, %d, %d}} , WCDMA cell CGI {rncId= %d,toCellId= %d, c
Ahascasebeen stored
target but
cell at
of cell/interface
handover least
trace,
cannot theuniquely
be LNRELW's
possible reasons
selected mobility parameters
are:_x000D_
because (psHoAllowed,
several candidates srvccAllowed)
are available for a has been
certain PCIsetvalue 'forbidden',
and carrierb
(limit
-The in
Thebase3GPP
Cell Trace 36.331
feature (32)).
is not_x000D_
enabled at the BTS._x000D_
The station
additional has info
alarm executed
holds the baseband
ARFCN board
of theis(FSP)
affectedrecovery activities. All baseband boards areandavailable again but notnumb
all c
- The Id used for the cell/interface trace session already carrier
in use forfrequency
anotheras well cell/interface
active as the LNCEL LNRELW
trace session._x000D_ instance
"Affected
The
- TheEARFCN WCDMA
number anARFCN
of cell
of LTE carrier cell
and neighbor
interface = %d,
trace aLTE
is sessionscell ECGI{ecgiAdjEnbId
mapped atEARFCN
the BTS has according = to
reached %d,theecgiLcrId
the = %d,
MFBI-profile
maximum ecgiPlmnId
configuration
number of cell and= { interface
%d,
(that is, %d, %d}}
trace ,sess
the requiremenWC
As a fault
This consequence,
occurs when HOCGI to this neighbor cellindicate
measurements is not possible
that twoand call drop
or more cellsrate
thatmight increase
operate on theifsame
there frequency
is no otheruse suitable handov
the same PC
This fault indicates that:_x000D_
1.
The TheX2absolute
interfacevalue resetof has estimated
failed after phase several errorattempts.
of an eNB, Thiswhich is in holdover,
indicates that a severe has exceeded
failure hasthe limit of 5forus,_x000D_
occurred, example there is s
or_x000D_
There
2. eNBisisno more X2 connectivity
than 6 hourstoisan adjacent
holdover mode BTS,what the means
adjacent BTS
that has failed,
estimated and error
phase so on. value may be not credible. It is assumed
Flexi BTS FDD, Flexi BTS TDD:_x000D_
There
S1 interface is no S1 resetconnectivity
has failedtoafter an MME. several _x000D_
attempts. This indicates that a severe failure has occurred, for example there is some
_x000D_
The cell is deactivated
Fault is generated if S1 setup procedure has subsequently because S1 is unavailable (that is, none beenofattempted
the PLMNs and configured for the cell currently
failed "maxS1SetRetry" number have a serving M
of times._x000
provided.
_x000D_
The Otherwise, the period
S1 eNB configuration update procedure has failed._x000D_ length is set to 15 min. _x000D_
_x000D_
Flexi
_x000D_
A
Note: RIMZone request
Ais cell
Micro
is to FDD,
the serving Flexi Zone BSS S1 Micro
has TDD:_x000D_
failed after several attempts. This means that System Information for the is related GERAN
There
The MME nocouldS1considered
connectivity
not be informed toto haveanaboutMME, availability MMEwhen
themodification
the there
of at is
has failed, and at least
least sooneon.one
ofIftheconfigured
the PLMN
fault is canceled,
following of autonomous
the cell which
eNB configuration currently
recovery
data:_x000D_ serve
actions (r
availability.
-AeNB RIM Name_x000D_
association could not be established because a RIM Error PDU has been received or a RIM Application Error has been d
-System-Information-Broadcast-related
Supported TAs (TAC, PLMN Identities)_x000D_ parameters have changed more than 32 times within three hours.
-Diagnostic Default paging DRX
Files have been collected for an internal reason and are available in the BTS.
Physical memory supervision has detected that memory usage has exceeded 90%(FCM/FCT)/98%(FSP).
A non-correctable bit-toggling error has been detected in the critical DSP memory.
A fatal error of the DSP HWAPI SW has occurred._x000D_
_x000D_
A fatal error of the DSP Application SW has occurred._x000D_
Flexi
_x000D_ BTS FDD, Flexi BTS TDD:_x000D_
The
If an BTS
FSP hasthe purposely triggered a GPIO reset is forathe DSP._x000D_
Flexi
_x000D_ BTS in FDD, BTS Flexi generates
BTS TDD:_x000D_ this fault, there malfunction in_x000D_
a
The
If corresponding
an transport
FSP in thepart FSP
BTS of the sub-module._x000D_
generates BTS has thisbeen fault, reset
there atisthe a date and time
malfunction given in the notification._x000D_
in_x000D_
_x000D_
If
_x000D_ all FSPstogenerate this fault, there isbeena malfunction in thethe FSM._x000D_
a
A
Flexi corresponding
change
Zone the
Micro FDD, FSP
BTS IPsub-module._x000D_
settings
Flexi Zone has Micro received
TDD:_x000D_ from BTS Site Manager. To activate the change, the BTS needs to be re
_x000D_
1.FSMr2
If all FSPs supports
generate the this following
fault, cause
there is formalfunction
a the reset:_x000D_ in the FSM._x000D_
If
The
Flexi
_x000D_ an alarm
FSP
Zoneinis the
MicroraisedBTSFDD,if generates
the Flexi BFD thisMicro
service
Zone fault, there
is TDD:_x000D_
not is a malfunction
available anymore on in thethe whole
BTS for BTS.all BFD sessions belonging to that BFD group.
_x000D_
If
"trs
Loss
Flexi anpower-on
FSP inMicro
of frame.
Zone the ItBTS
reset":
is not
FDD, generates
Coldpossible
Flexi startZone this
:to_x000D_ fault,traffic
carry
Micro thereon
TDD:_x000D_ is the
a malfunction in the whole
interface referenced BTS.
in the alarm text. All other transmission alarms related
"trs
If an watchdog
Flexi BTS FDD, Flexi BTS TDD:FSP in the reset":
BTS System
generates overload_x000D_
this fault, there is a malfunction in the whole BTS.
"trs
Probable
No startup
signal isfailure":
cause receivedfor E1 Failure
oninterfaces:
theinduring
interface startup
The referenced _x000D_
interface atinthethefar end text.
alarm is notAllconfigured to be a framed
other transmission alarmsE1related
interface.
to this signal are suppre
A
"trs dead peer
software was
failure":detectedSoftware one of the
failure_x000D_ IPsec associations of the FTM._x000D_
There
"trs
Probable
Flexi is no
management
BTS cause
FDD,response for reset":
Flexi T1 tointerfaces:
BTS the
Reset requests
TDD: Thesent
triggered bytomanagement
interface theatpeer, either
the far during
is not the
interface:_x000D_
end IKE SA to
configured setup,
be a the IPsec SA setup or during DPD._x000
T1 interface.
Probable
Note: When causes IPSec for Ethernet
backup interfaces:
tunnel feature is enabled, this alarm should not be raised due
"trs
The
-_x000D_
Primary fallback":
small
a cable and cut Fallback
isform-factoror therepluggable
secondary executed_x000D_
is
timingno cable (SFP)
source connected module
lost. Thetodetected
LTE in the on
theisinterface
running interface
internalconnector
clock or in does not failures
to
hold-over comply
modewith
whensecurity
trying torequirements.
and no timing
setup primar
signal is sen
_x000D_
-One the ofelectrical signal is excessively attenuated
Possible
FSMr3
Flexi Zone reasons:_x000D_
the Micro
supportssynchronisation
the
FDD, following
Flexifar sources
cause
Zone in
Microfor the the
TDD: configured
reset:_x000D_ priority list is unavailable.
-This
The
-This the port
first
a cable
can atcut
and
is
be the
second
or connected
there synchronization
isorBTS
no end
thecable node sources
connected is switched
from off
the
toissource.
the configured priority list are unavailable. On failure, the LTE switches auto
interface_x000D_
_x000D_
The small
alarm isthe
form-factor
raisedprimary pluggable
if the secondary
(SFP)
cannot module
update clock the not supported,
Certificate not present,
Revocation or could
List (CRL). not berefer
Please recognized.
PDDB parameter CERTH::CR
-The
"trs thepower-on
signalform-factor
small is excessively
reset": Cold
pluggable attenuated_x000D_
start_x000D_
(SFP) module detected in the interface connector does not comply
Flexi
Probable
A
-The
In Zone
loopback
the
the port
alarm:at Micro
cause:
isthe FDD,transmission
The
requested
connected Flexi
forfaranZoneEthernet
end Micro
links selected
node TDD:
interface
is switched for clock
either
off source
locally are BTS
at the faulty.orThe
the reason
Link OAM canclient of with
be alarms theon the
BTS theSFP setmodule
isinterfaces types
(for
into loopbackexa
"trs
No watchdog
SFP
signal module
is reset":
received was onSystem
expected
the overload_x000D_
by
interface the SW,
referenced but found
in themissing.
alarm text. All other transmission alarms related to this signal are suppre
Protocol
On
"trs an
Probable software can
interface
causes: be forPDH,
failure": which Timing
Software over
the Link Packet
OAM
failure_x000D_ (ToP) and Synchronuous
functionality was switched on, ethernet.
no Link OAM PDUs were received during the period spe
-"trs
A Link OAM
Probable No management
SFP module
causes PDU for reset":
is inserted
containing Reset at
Ethernetainterfaces: triggered
the SFP-based by management
Ethernet interface_x000D_
interface.
critical link event flag was received on the Ethernet interface. The alarm is raised with the first de
Unit
-"trs The Number
spurious
SFPismodule's is optional:
reset": Reset
interface reason
contacts detection are failed_x000D_
corroded
--For
A amalfunctioning
cable
PDH and cut or there
of
Synchronousthe is
SFP no cable
transceiver
Ethernet, connected
Unit was to theisor
detected.
number
dirty, preventing either read access to the SFP module at the time of rea
interface
0 or 1.
-_x000D_
The
-Excessive
The The
the SFP
following
electrical module critical
signal type link is not
events
isaexcessively supported.
are possible:
attenuated
-It
-2. is SFP
not
"$date"
hasbit reported
present error for Timing
is rate. anThe
transmission
Over
measured Packet(TOP).faultbitPeriodcondition
error rate and has disabled
exceeds the threshold the laser
valuetransmitter.
of BER-3
Errored(10E-3).
- Critical the atformat
portEvent: the either local
connected time
far stamp
Errored endSymbol node (GMT+/-xx:xx)
is switched .off
Event, E.g:an2014-04-12
Errored Frame 00:51:26
Event GMT+0530_x000D_
an Frame Period Event or an Errored
_x000D_
-The
Loss Dyingfault is generated
of Gasp:
multiframe. eitherThe the only localwhen
interface or the the interface
remote
referenced inisthe
peer not
has configured
a fatal
alarm texterror
has asand LMP
lost is
the(that
about is,togenerated
multiframe restart. only when the interface is configured
alignment.
The
Probable
-Alarm Linkinterface
Fault: causes:
thevaluelocal ispeeroptional: has detected a physical link fault byin receiving direction, e.g.device
a LOS.
The
-ProbableForfault
the PDH
signal isthe
indication generated
level valuesignal
is toorangeonly
low when
is received.
depends
(optical the This
oninterface
signal
the is
is not
hardware configured
generated
unitaretype: aselectrical
an
1..16 LMP (that
intermediate is,PDH
generated only
in thewhen the interface
forward direction is configured
because it d
cause: the interface type connectors
has not been or cables
configured dirty,
to meet the framingconnectors or cables
of the interface atare
thecorroded)
far end. For E1 interfaces
- the
Remote For specified
Synchonuous
defectmaximum Ethernet
indication. It isthe
length sentofvalue
the
by cable range
the is=exceeded
1..3
intermediate or the far end equipment because it detects a serious fault in the receive
All
-Unit It other
the not transmission
ismissing.present
connector is for
not alarmsover
Timing
properly related Packet.
connected to this to signal
the unit are suppressed.
The slot has been configured to hold a unit but the plug-in_x000D_
-unit theisreceiver
Probable not cause: or the
physically Thefar farend
present endtransmitter
has
in the a slot._x000D_
LOS, has LOF failedor AIS alarm on its receiving interface.
Probable
The alarmcause: is triggered There is a transmission
whenever a service problem
OAM error somewhere
related to in the
the transmission
intermediate network and AIS is sent instead of user traffic.
_x000D_
of Continuity Check Messages (CCM) persists on aAIS given Ethernetitinterface
When
Probable a MEP receives
causes:_x000D_ a valid ETH-AIS frame and is enabled, shall trigger an AIS alarm containing the following informati
as soon as
-receiving one interface
of the error condtions below occurs.
_x000D_
Five consecutive
The following alarms failed arelogin attempts to the FTM have been performed.
defined:
-A the -MD
unit levelbeen
has configured
1)requested
MDL_MISMATCH,
-Source certificate
MAC address priority
could not 5 but benot
(highest detected_x000D_
retrieved priority): from CCM the is receivedauthority
certificate with MDL (CA).
-A the
lower unit
than
requested is broken
the highest
certificate and therefore
configured
could not not
beone detected_x000D_
in
renewed the BTS
from and
the not matching
certificate any
authority of (CA).
The
-the alarm
theconfigured
unit has is raised
been if the alarmbut
configured is enabled,
some other theunit BFDisstate for the session is not AdminDown and nevertheless no BFD packet is
detected_x000D_
NOTE: In FSMr2, ones. pure number interface arethe used (eg. 1,2,3). But for FSMr3 unit types, interface is provided as: from
"module type n
_x000D_
The
Ex:
A alarm
CCM
requested is
fault raised
level
certificate if the
- prio could alarm
5 BTS,
cause
not beis enabled,
MDL_MISMATCH
retrieved BFD
as the number state of the session
of"interface
certificates is received
not AdminDown and the
from repository BFD
serverpacket
(RA) or the far
certificate end
au
NOTE:
NOTE: In Flexi
unitindicates Zone
variable should Micro interface
be5:replaced is provided
by appropriate as: EIF
HW which
namesisconfigured number". (unitTypeConfigured)
2)
This MAID_MISMATCH
alarm priority
that there isCCM a mismatchis received between with MDL BTS configuration configured
and auto-negotiation result.during runtime reporting.
in
The theRTTBTS, but withalarm
threshold MAIDisnot sent matching
in case any the MA average configured
value of in the
the RTT BTS exceeds_x000D_
on
this
the MDL.
configured threshold. shall be sent in case the configured value of PLR is exceeded.
The
Ex:CCM PLR faultthreshold level 5alarm prio 5 cause MAID_MISMATCH
3) MAID_MISMATCH
BTS shall report this alarm priority 5:CCM
if the NTPisserver received is not with matchingorMDL
accessible if theand NTP MAID,
server cannot be used._x000D_
but the
Note 1: VLAN
Filtering membership
time is not of the to
used received
clear the frame does not match the VLAN configuration of the addressed MA.
alarm._x000D_
Ex:CCM
Note fault level
2: Filtering time 5 prio
is not 5 cause
applicable MAID_MISMATCH
for FSMr2._x000D_
4)may
It ERR_CCM,
take up to priority
1 minute 4:CCM is received
to raise the alarm withon knownFSMr2. MDL and MAID, but MEPID
is not configured in the Remote MEP list of the MA.
Ex: CCM fault level 5 prio 4 cause REMOTEMEP_NOT_CONFIGURED
5) ERR_CCM, priority 4: CCM is received with known MDL, MAID and MEPID,but CCM interval coded in the received CCM doe
The BTS shall raise a "Vendor BTS certificate due to expire" alarm when the Vendor BTS certificate is about to expire._x000D_
_x000D_
NE stores trust anchors for its own trust chain and for peers. When own or any trust anchors are about to expire/expired this al
The period of notification in advance is configurable and the same as for CA certificate expiry._x000D_
FTM
_x000D_ Fault, for which fault name is mentioned in the Fault name field, is toggling in the FTM. Toggling fault condition is informed
Fault._x000D_
1
Inday case...the
4999 days with
incoming SSM default
is not 1825
receiveddays._x000D_
for a certain time period (configured via "ssmTimeout" parameter) this an alarm is rais
This alarm is raised when the received SSM indicates lower clock quality (e.g. "do not use" or "EEC") than required.
The reference clock monitoring has detected a loss of ToP reference clock signal received from the master clock behind $IP._x
-During
The eNB the does
BTS IP notaddress
receiveconfiguration
a reply from ToP Master
the BTS testswithin a certain
the direct time (5
attached sec) upon
network it hasother,
whether sent a sync request
already message_x00
configured BTSs, on
-warning
The eNB receives
shall contain fromthe ToP Master
corresponding a granted
IP message
address. For rates
each (sync
DAD message
event a rate,
separate delay message
reporting shall rate),
be that does
indicated._x000D_not match
SW does not support the detected HW unit type._x000D_
_x000D_
BTS has entered IPsec emergency bypass active state.
Probable
BTS causes:_x000D_
has entered IPsec emergency bypass active state where
The
_x000D_base station is currently capturing IP traffic towards a localconfigured
port or intoIPsec
a file policies are ignored
on the base station. and all traffic is sent unprot
ifThis
thealarm
- The traffic
system capturing
module's
will isSW
be triggered happening
when attowards
version isleast a local
too old_x000D_
one port,
primary port tunnel
IPsec and destination mac has
fails and BTS address needs
switched to be
over to provided.
secondary IPsec tunnel.
Port
As values
-Incorrect
Supported
a result can
HW
of be LMP
variant
failure in or
not
at < HW MODULE
present
least one in system
primary NAME
module>-<PORT ID>.
i.e LMP orcell configuration
FSM-EIF1, for RFor
FSM-EIF2 modules
FTIF-EIF1 with a different frequency. The same cell is configured for two RF IPsec
IPsec tunnel, BTS has automatically switched over to secondary modules tunnel
thattermin
are n
_x000D_
The FSP does not support the requested BTS configuration.
In case of multiband RF variants, the Tx and Rx frequencies and channel numbers must always be in the same operating band
The BTS has tried to correct a fault situation by performing a recovery unit, site or BTS reset, but some reason, the recovery is
Antenna carrier resources were not successfully set up during cell setup or cell deletion procedure because of the failure of RX
A fan is not rotating or is rotating more slowly than the requested speed, or the RPM information for the fan is not available.
All the fans or more than one fan in the same fan group are rotating more slowly than requested.
The SW update to the BTS has failed. The error can be caused by a module reset during the SW update, a hardware problem i
_x000D_
The summing service release from reset has failed.
Cell activation procedure has failed because of an error in the processing of cell configuration data. The corresponding cell can
The output signal of the OXCO has some problems and one or more clock pulses are missed.
The sample set of phase measurement not fulfilled the filtering criteria. _x000D_
The
Moretuning
than oneof oscillator is not able totypes
sector configuration calculate
(A, G,theH)new
are DAC value.to the same RF Module.
configured
The Fault diagnostics rule file is missing or its parsing has failed.
The Fault diagnostics rule file is missing or its parsing has failed.
The RNW configuration data contains a request to create a cell for a non-existing LCR: the LCR ID parameter associated with t
Secondary optical link between the System Module and RF Module is lost.
The RP3 or Ethernet buffering is not working, and the buffer becomes full. The optical device is malfunctioning. The fault might
The RP3 or Ethernet buffering is not working, and the buffer becomes full. The optical device is malfunctioning. The fault might
The FlexiBTS has detected an abnormal operation or a failure in the BTS internal baseband bus. The failure cannot be attribute
The FlexiBTS has detected an abnormal operation or a failure in an optical RP3 interface between two modules. The failure can
The internal temperature of the RF Module or System Module exceeds the threshold value, or the ambient temperature of the m
Some of the commissioning parameters are either missing or faulty, or there is a mismatch between them.
A software update to a module or sub-assembly has failed, or a corrupted SW file has been detected in the FLASH.
The System Module or the device itself has detected an abnormal operation or a failure in the antenna line device.
The FlexiBTS has detected an abnormal operation or a failure in the Masthead Amplifier (MHA).
The connection to the Flexi Transport submodule (FTM) is lost.
Note that the Tower Mounted Amplifier (TMA) is a synonym for the MHA and is used by the Antenna Interface Standards Group
Mandatory parameter missing in the radio network configuration data.
The BTS monitors the FSP phase-locked loop (PLL) lock status and PLL locking fails.
A corrupted SW file in the FLASH has been detected._x000D_
The
FSMunit cannot
notices complete
a shared radiothemodule
start-up.
is connected to different OptIF connectors on peer system modules.
The cells, whose TX carriers are served by the affected Antenna Lines are deactivated to reduce the power transmitted by the P
mismatch).
Not enough RP3-01 links connected between FSM and FR. Commissioned cells cannot be routed via existing RP3-01 links.
FSP is undergoing a cold reset.
During SW update it was detected that configurations of active and passive SW in HW unit are same. Active and passive SW co
- before SW download
- during SW activation before active and passive SW switch
- during start-up
Power feeding for given Radio Module has been switched off by user from BTS Site Manager remotely.
RF module cannot be detected due to IP address conflict between RP3-01 nodes.
Power level is too high for at least one of the cells using the same radio module while at the same time at least one of the cells
FSM notices that a primary optical link connection to the Radio Module has been lost and the radio has been detected only via
Meaning in issue 01
The temperature of a unit exceeds the threshold value.
A software update in the module or submodule has failed.
Flexi BTS FDD:_x000D_
The reference
Connection to afrequency
module that thatbelongs
the BTStomasterthe BTS clock receives has
configuration haschanged
been lost.by about 0.2 ppm or more (which equals the change
_x000D_
Failure
The cause wasofdetected
the alarm while
mightoperation
be:_x000D_ when eNodeB O&M system presents available FSP to Cplane software in order to map FS
_x000D_ synchronization has failed._x000D_
FCM/FSP
1. The reference
Incompatible frequency
software has beenhas changed
detected.because of a fault in the transmission network synchronization (which in turn is cause
reference synchronization. The alarm can also be activated if the faulty reference synchronization is corrected and there is, aga
The file system format of the downloaded software is incompatible with the file system format used in the BTS.
_x000D_
2. TheBTS
Flexi reference
FDD, Flexi frequency fluctuates continuously because of a significant amount of jitter/wander in the transmission network
BTS TDD:_x000D_
T
TheG.823/824/825._x000D_
The BTS is unable to obtain acannot
SNTP time or GPS time file frombe the
fetched within(error
file server the time
in FTP limit._x000D_
open or FTP get). The file server is down, the file is missing,
_x000D_
occured.
The
Flexi downloaded
3. If the
ZoneBTS-integrated
Micro FDD, SW isFlexi
corrupted
transport
Zonepart or isreceives
Microincorrectly
TDD, Flexi theformed.
synchronization
Zone:_x000D_ information via the 2.048 MHz synchronization input (extern
case._x000D_
UTC time source is not available
Flexi BTS FDD, Flexi BTS TDD:_x000D_ in BTS or Flexi Zone Access Point.
_x000D_
Setting
A module non-active
is blocked SW block(s)
with BTS Site thatManager._x000D_
contain a new SW version as active has failed during new SW version activation._x000D_
4. There
_x000D_
_x000D_ is an equipment fault in the BTS. The equipment fault is, however, not the most common reason. Normally, the reason
Flexi
_x000D_
Flexi BTS
Zone FDD,
Micro Flexi
FDD, BTS
Flexi TDD:_x000D_
Zone Micro TDD:_x000D_
The
The purpose
fault is tothat
notifies avoid
thefault
user indications
has blocked that themight
cell be
withraised
BTS during
Site the module maintenance task._x000D_
Manager._x000D_
Flexi
The
The Zone
SW
BTS
fault is
is Micro
updateblocked
raised FDD,
to the
only Flexi
BTS
with BTS
when Zone
hasSite
an LTEMicro
failed. The
Manager.TDD:_x000D_
system error
The might
modulepurpose be
(FSM) caused
is to
is avoid
the by a module
fault
master reset
of theduring
indications
agent that theradio
might
blocked SW update,
be raised
module a(FR).
hardware
during a In
BTS problem
mainten
other case
_x000D_
The reference frequency that the BTS master clock receives has experienced a significant change during the measurement per
Flexi Zone
Flexi BTS FDD, Micro Flexi
FDD, BTS
Flexi TDD:_x000D_
Zone Micro TDD:_x000D_
_x000D_
The fault informs thehas
operator that BTS
the BTS isManager.
trying
The
The user
unit
cause has
or blocked
module
of the alarmthebeencelltested
might with Sitethe
during BTS to correct a
power-on fault
self testsituation
(POST)by performing
and a recovery
a failure has reset to a unit, the site,
been detected.
In case of an RF module resetbe:_x000D_
in RF chaining configuration, the BTS also resets all RF modules that are further in the chain._x0
_x000D_
A unit cannot be identified by its product code or by its physical device address (object ID).
_x000D_
1. TheZone
Flexi reference
A non-supported Micro frequency
FDD,has
unit Flexi has
beenZone changed because
Micro TDD:_x000D_
detected in the System of a fault in the
Module. transmission
Typically, networkwhen
this happens synchronization (which in
a new unit version is turn is cause
installed whil
reference
The BTS synchronization.
tries to recover a The
fault alarm can
situation byalso be activated
performing a siteif the
reset. faulty reference synchronization is corrected and there is, aga
A flash memory operation failure has occurred. If this alarm continuously appears, the flash chip might be broken.
_x000D_
2. The reference
A flash memory operationfrequencyfailure
fluctuates continuously
has occurred. because
If this of a significant
alarm continuously amountthe
appears, of flash
jitter/wander in the
chip might be transmission
broken. network
T G.823/824/825._x000D_
A flash memory operation failure has occurred. If this alarm continuously appears, the flash chip might be broken.
_x000D_
A flash
3. If thememory operation
BTS integrated failure has
transport partoccurred.
receives the If this alarm continuously
synchronization appears,
information via the
the flash
2.048chipMHzmight be broken. input (extern
synchronization
case._x000D_
A flash memory operation failure has occurred. If this alarm continuously appears, the flash chip might be broken.
_x000D_
Synchronization between the FCM/FCT and FSP is lost.
4. There is an equipment fault in the BTS. The equipment fault is, however, not the most common reason. Normally, the reason
Flexi BTS FDD, Flexi BTS TDD:_x000D_
The
Antennaoperating
(RP3)system (OSE)the
link is down: goes into the error
transmitter handlerdrops
or receiver with a fromfatalsynchronization.
status. The cause can be, for example, an out of memory s
_x000D_
The
If onlystate
oneofFSP the inexternal
the BTS alarm line shows
generates that an
this fault, external
there alarm is notified._x000D_
is malfunction in one of the FSP submodules. If all FSPs generate this fau
_x000D_
_x000D_
The state of the external alarm line shows that an external alarm is notified._x000D_
The
Flexi user
Zonespecifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
_x000D_
The state ofMicro FDD,
the external Flexi
alarmZone lineMicro
shows TDD:_x000D_
that an external alarm is notified._x000D_
The
_x000D_operating
user system
specifies, (OSE)
during goes into the the
commissioning, error handler
alarm with aseverity,
number, fatal status. The cause
and polarity thatcan be, forthe
indicates example,
fault. an out of memory s
The state of the external alarm line shows that an external alarm is notified._x000D_
The
_x000D_user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
The state of the external alarm line shows that an external alarm is notified._x000D_
The
_x000D_user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
The state of the external alarm line shows that an external alarm is notified._x000D_
The
_x000D_user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
The state of the external alarm line shows that an external alarm is notified._x000D_
The
_x000D_user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
The state of the external alarm line shows that an external alarm is notified._x000D_
The
_x000D_user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
The state of the external alarm line shows that an external alarm is notified._x000D_
The
_x000D_user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
The state of the external alarm line shows that an external alarm is notified._x000D_
The
_x000D_user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
The state of the external alarm line shows that an external alarm is notified._x000D_
The
_x000D_user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
The state of the external alarm line shows that an external alarm is notified._x000D_
The
_x000D_user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
The state of the external alarm line shows that an external alarm is notified._x000D_
The
_x000D_user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
The state of the external alarm line shows that an external alarm is notified._x000D_
The
_x000D_user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
The state of the external alarm line shows that an external alarm is notified._x000D_
The
_x000D_user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
The state of the external alarm line shows that an external alarm is notified._x000D_
The
_x000D_user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
The state of the external alarm line shows that an external alarm is notified._x000D_
The
_x000D_user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
The user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
The state of the external alarm line shows that an external alarm is notified._x000D_
_x000D_
The state of the external alarm line shows that an external alarm is notified._x000D_
The user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
_x000D_
The state of the external alarm line shows that an external alarm is notified._x000D_
The user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
_x000D_
The state of the external alarm line shows that an external alarm is notified._x000D_
The user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
_x000D_
The state of the external alarm line shows that an external alarm is notified._x000D_
The user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
_x000D_
The state of the external alarm line shows that an external alarm is notified._x000D_
The user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
_x000D_
The state of the external alarm line shows that an external alarm is notified._x000D_
The user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
_x000D_
The state of the external alarm line shows that an external alarm is notified._x000D_
The user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
_x000D_
The state of the external alarm line shows that an external alarm is notified._x000D_
The user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
_x000D_
Software download to FSP, DSP, or FR has failed.
The user specifies, during commissioning, the alarm number, severity, and polarity that indicates the fault.
Communication with an application has failed. It has not replied to the message that has been sent/resent to it.
Flexi BTS FDD, Flexi BTS TDD:_x000D_
The
The radio channel
baseband busthat has configuration
related been requested in the
of <x> commissioning
was rejected by the fileHW
is not
SW,supported supported
DSP, or RF SW. by the detected BTS radio or M
_x000D_
The
Flexibaseband
Zone Microbus synchronization
FDD, toward
Flexi Zone Micro <x> has failed.
TDD:_x000D_
The requested channel
reference clock in the start-up
monitoring phase is
has detected not acceptable
a loss of signal infor
thethe BTS hardware,
reference receivedbecause
from theof an incorrect frequency band a
FT.
The OCXO warm-up takes too long and the OCXO does not become active within a period of eight minutes from power-on. The
Flexi BTS FDD, Flexi BTS TDD: _x000D_
The
The OCXO adjustment
output signal of thearea
OXCO is reaching
is missingitsand
limitthe
value. The DAC
FCM/FCT worddeliver
cannot value the
of the OCXO
30.72 MHzisSystem
lower than or required
Clock equal to the Min.Ocxo
by the other
_x000D_
A request
Flexi ZonetoMicro
retrieve
FDD,theFlexi
public IP address
Zone information of the FCM/FCT from the FTM has failed.
Micro TDD:_x000D_
Master
The clock frequency
temperature is tuned
measured fromto within
the sensor5%specified
of its minimum or maximum offset. Flexi
in "Temp.Cold.Start.Sensor" Zone Micro
(= FSP)is BTS "Temp.Cold.Start.Limit"_
less than does not use DAC tuning
The BTS cannot start properly because the FSPs cannot be powered up at conditions that are too cold.
The Masthead Amplifier (MHA) does not work properly. However, the system cannot determine the impact on the RX signal leve
The Masthead Amplifier (MHA) does not work properly. Because of the low current drawn by the device, it is assumed that it do
To
Thestabilize the situation
Radio Module (60W and
RRH) keep the RX
or Filter (allsignal onhas
others) the detected
required level, there is
overcurrent onathe
need to switch
antenna line.DC
Thepower off for
antenna linealarming MHA
might be dam
Module.
Flexi BTS FDD, Flexi BTS TDD:_x000D_
The
The VSWR
VSWR valuevalue exceeds
exceeds thethe level
level defined
defined as as criterion
criterion for
for VSWR
VSWR MajorMinor event.
event. The
The impedance
impedance of of the
the antenna
antenna line
line does
does not
not ma
ma
_x000D_
The Radio Module has detected a malfunction
Flexi Zone Micro FDD, Flexi Zone Micro TDD:_x000D_ of an internal LNA unit.
detected
The Radio VSWR
Module is exceeds
unable tothetunedefined threshold.
to a required The antenna
sub-band properlyand/or antenna feed line is disconnected, mismatched, or da
(tuning_x000D_
failure), or another major failure has been
Radio Module has detected internal filter failure. detected by the Radio Module_x000D_
(unit faulty).
1845: TILT is not configured._x000D_
Others:
1845: TILTAntenna
is not tilting is not possible or might function incorrectly.
configured._x000D_
Others:
1845: TILTAntenna
is not tilting is not possible or might function incorrectly.
configured._x000D_
Others:
1845: TILTAntenna
is not tilting is not possible or might function incorrectly.
configured._x000D_
Others:
1845: Antenna
TILT is not tilting is not possible or might function incorrectly.
configured._x000D_
Others:
A hardware failure has is
Antenna tilting not reported
been possible orby might function
ALD (RET, incorrectly.
MHA) or by RFSW (Filter) ._x000D_
Note: Filter in Radio Module is considered as ALD even
The unit is in download mode state. This fault is returned when an though it isunsupported
an internal part of FR. occurs in download mode.
procedure
A corrupted SW file in the FLASH has been detected._x000D_
The
The unit cannot complete
synchronization set-upthe start-up.
between a BTS configured as slave and a BTS working as master has failed during BTS startup. A
The heater control connection of the FSM is faulty, there is no heater, or the heater is faulty.
During BTS startup or BTS recomissioning, the BTSOAM has detected that there are not enough: _x000D_
a) radioinresources
A fault or _x000D_
the Masthead Amplifier (MHA) is detected. MHA functionality is degraded. The real impact cannot be determined.
b) FSP resources or_x000D_
A fault in the Masthead Amplifier
c) cables between the system (MHA)and
module is detected.
the radio MHA is not
module working._x000D_
or cables between the extension baseband module (FBBx) and the
The device is not working properly, the configuration is not valid, or a given parameter is incorrect.
The device is not working properly, the configuration is not valid, or a given parameter is incorrect.
The device is not working properly, the configuration is not valid, or a given parameter is incorrect.
The device is not working properly, the configuration is not valid, or a given parameter is incorrect.
SRAM memory operation failure has occurred. If this fault appears continuously, the SRAM chip might be broken.
SRAM memory operation failure has occurred. If this fault appears continuously, the SRAM chip might be broken.
The reference clock monitoring has detected a loss of PPS signal in the reference received from the GPS receiver.
The reference clock monitoring has detected a loss of 2.048 MHz signal received from an external reference source, connected
The RF module configuration has failed because of HW or SW fault.
A critical configuration file is missing from the RF Module.
The RF Module SW detected that a non-critical configuration file is missing.
The System Module clock reference differs from the RF Module clock.
The baseband bus between the System Module and RF Module is out of synchronization.
The RF Module baseband bus is configured incorrectly.
There is an error in the baseband or optical bus.
The RF module's TX path is not usable.
Flexi BTS FDD, Flexi BTS TDD:_x000D_
The
The TX
RF output
Modulepower adjustment
filter has measured failed._x000D_
too low TX power.
_x000D_
Flexi
Flexi BTS
ZoneFDD,
MicroFlexi
FDD,BTS TDD:_x000D_
Flexi Zone Micro TDD:_x000D_
The
CLGC RF module's
The RFconvergence RX RF
module is outfailed, synthesizer
targetiscannot
gainbecause
of order not
of alocked._x000D_
be achieved.
software or hardware fault.
_x000D_
The power
Flexi supplyFDD,
Zone Micro supervision has Micro
Flexi Zone detected an overvoltage, undervoltage, or overcurrent in the RF module.
TDD:_x000D_
The RX path insignal
feedback the FR to module is faulty.
predistortion is too weak or missing. The TX performance is degraded.
The TX signal adjustment fails.
During RF startup: The temperature inside the RF Module is too low. Heating of module is ongoing. Wait until the alarm is cance
_x000D_
The permanent memory in the RF module is corrupted and the module product code or serial number is missing, or the module
During RF runtime: The temperature inside the RF module is going too low. Problem might occur.
The RF Module SW detected conflicting or corrupted configuration data.
An RF module's power-on self-test failed at start-up.
The RF module has lost lock to the incoming clock.
The highest temperature exceeds the power decrease limit in RF module.
The FPGA software update has failed in RF module.
The fault is detected in radio sharing configuration where WCDMA FSM is master FSM and LTE FSM is slave FSM. The fault m
In
Thethe casemodule
radio where cannot
LTE is master
identifyFSM
the fanandtype
FR that
is blocked
is usedfault 48:EFaultId_UnitBlockedAl
or the fan is not installed at all. is detected, not 1931.
Fan(s) are not running in RF module.
Fan(s) in RF module are rotating slower than requested.
Fan(s) in RF module rotate faster than required.
The validated RF module temperature is higher than the predefined maximum allowed value.
The validated RF sensor temperature is greater than or equal to the predefined value on the unit property file.
The validated temperature of any PA sensor in RF module is higher than or equal to the predefined value on unit property file.
Increased bit error rate has been detected on the optical link to the radio module, which results in sporadical LCV errors in dow
Abnormally high bit error rate has been detected on the optical link to the radio module, which results in permanent baseband p
The Tx in the RF module has been switched off to protect the radio module hardware, which might be damaged because of hig
The FR module detected permanent RP3 routing collisions in either downlink (TX), or uplink (RX) transmission directions.
The Small Form Factor Pluggable (SFP) malfunction has occurred (fault 2000), or the SFP module is not physically present (the
The Small Form Factor Pluggable (SFP) malfunction has occurred (fault 2000), or the SFP module is not physically present (the
The incoming optical signal to the Small Form Factor Pluggable (SFP) is missing, too weak, or the fiber cable has been detache
_x000D_
The data is faulty because there is interference in the fiber cable._x000D_
The connection between the System Module and the RF Module is broken OR connection between the Baseband Module (for e
_x000D_
The RP3 channel has lost the frame synchronization state that it had achieved.
A physical connection failure has occurred between the optical interface and the summing function (for example, caused by bad
The RP3 or Ethernet buffering is not working, and the buffer becomes full. The optical device is malfunctioning. The fault might
FaultRP3
The 2006ormay be detected
Ethernet in is
buffering Flexi
not BTS TDDand
working, only._x000D_
the buffer becomes full. The optical device is malfunctioning. The fault might
Fault
Fault 2007
2006 may
may bebe detected
detected inin Flexi
Flexi BTS FDD only._x000D_
BTS TDD only._x000D_
Fault
Fault 2010
2007 may
may bebe detected
detected both
in Flexiin Flexi BTS FDD
BTS FDD and TDD.
only._x000D_
Fault 2010 may be detected both in Flexi BTS FDD and TDD.
The RP3 or Ethernet buffering is not working, and the buffer becomes full. The optical device is malfunctioning. The fault might
Fault 2006 may
The control message be detected in Flexi BTS
traffic between TDD only._x000D_
the modules is malfunctioning.
Fault 2007 may be detected in Flexi BTS FDD only._x000D_
The
Faultsynchronization
2010 may be detected to the clock bothcontrol
in Flexiunit BTS frame
FDDpulseand TDD. that has been achieved earlier differs from the currently received fram
The master frame in the received baseband bus frame is not in the correct place related to the internally generated master fram
A decoding error has been detected in the baseband internal link. The data packet is lost or the content is corrupted._x000D_
_x000D_
There is a baseband bus address mismatch in the summing. There are two possible causes:_x000D_
This
_x000D_situation is also triggered when the links do not synchronize with each other.
The frame alignment has been lost or the frame burst has a CRC error when the_x000D_
1. A configuration
System Module is error
working (twoasdifferent
a lost baseband units functioning)
synchronization - after an acknowledgement, the fault returns._x000D_
The frame
_x000D_ alignment has been or the frame slave burst hassystema CRCmodule._x000D_
error when the_x000D_
System
2. Module is working
on the as
bus a
- synchronization
The clock crossing buffer underflow or overflow in the RX block and data
Data corruption appears once whenslave system
unsynchronized module._x000D_ is sent by
the received datathemight
baseband.
be not valid. The fault is an indicati
The SW update to the BTS has failed or the BTS SW is corrupted.
The baseband bus message multiplexing slot for the message cannot be fulfilled.
An interrupt is generated if a message does not get routed._x000D_
_x000D_
Summing checks the headers of the messages to be summed. If the header is not an allowed type, summing is not performed a
This is considered normal when Faradays are starting up and RP3 sync is done.
The transmitter has detected an RP3 message from a summing coincident with a transmission rule.
The transmitter has detected more data coming from a summing than the current link rate can support.
The BTS has detected an abnormal operation or a failure in the internal functionality of the System Module._x000D_
_x000D_
The BTS has detected an abnormal operation or a failure in the BTS replaceable_x000D_
baseband
The FlexiBTS unit.has detected an abnormal operation or a failure in the internal functionality of the RF Module.
A fan, all the fans or more than one fan in the same fan group are rotating slower than requested, are not rotating at all, or the R
There is a compatibility problem in the BTS HW/SW versions or the HW/HW configuration. Another possibility is that there is a m
Flexi BTS FDD, Flexi BTS TDD:_x000D_
This
Flexi BTS
BTS fault
FDD,indication
Flexi BTSisTDD:_x000D_
generated if the reference clock monitoring function of the BTS does not receive the configured sync
_x000D_
1.Too many
The BTS
Background hascells
detectedare commissioned
information:_x000D_an RF Moduletothat BTS. _x000D_
cannot be put into use without a BTS reset._x000D_
2.Cable
_x000D_ between system module and radio module or between extension baseband module and radio module presented in site
There
A is a failure
TX path
_x000D_ fixed synchronization
has occurred, which priority list in in
results thethe
FlexiBTS:_x000D_
Multiple Input Multiple Output (MIMO) functionality not being operational or
An FSP overheat has occurred. In order to put the card back into use, the FSP must be restored to normal temperature and the
_x000D_
Flexi Zone Micro
The power
_x000D_ level that FDD, is Flexi
defined Zone Micro
in the RNW TDD:_x000D_
part of the SCF file is not supported by the HW.
-Priority
More 1: PPSthan
LNCELs (Pulse the Per Second)
supported signal connected
maximum is configured to theorSynchronization
too many LCRs Input interface (Sync
are commissioned to In)
oneofRF theModule._x000D_
System Module. No
The BTS
_x000D_ has detected an
a FSP Module
communication that cannot
problem be the
with put GPS
into use without
receiver._x000D_a BTS reset.
_x000D_
-Priority
The 2: external 2.048MHz
baseband-bus-related SRIO signal connectedfor
configuration to Faraday
the Synccore In interface
has been (NOTE:
rejected Notbyused in phaseSW.
the platform synchronization mode)._x00
The fault is ignored until the GPS receiver has reached commissioned state.
_x000D_
Flexi BTS FDD, Flexi BTS TDD:_x000D_
-Priority
The 3: the reference signal coming from the
lostintegrated transmission unit (FTM) (NOTE: Only ToP is used in phase synchron
The connection
internal maximum
_x000D_
to the FSP transferor DSPunit has
(MTU) been or the submodule
configuration has failed on reports
FCM,an FSP,error
or situation._x000D_
FBB.
_x000D_
Normally,
4026: all the FlexiBTS
EFaultId_TogglingAlFault sources
Flexi Zone Micro FDD, Flexi Zone Micro TDD:_x000D_ is are
used not
to in
informuse at
the the same
operator time
that (it depends
other_x000D_ on the network planning and BTS configuration).
generate
BTS fault a fault.
(original
The connection
Flexi BTS FDD, to During
Flexifault)
theBTS runtime
is operation,
toggling._x000D_
DSPTDD:_x000D_
module has been lost. the BTS fault functionality runs autonomously - notices also added/vanished source
_x000D_
The
The alarm related
commissioning to the
file original
download fault is suppressed and the new alarm_x000D_
has been started neither from BTS Site Manager, nor from NetAct during autoconfiguration. A
Flexi
The
related BTS
source FDD,
to theforfault
theFlexi FTM
4026:BTS TDD:_x000D_
(which is the priority 3 source
EFaultId_TogglingAlFault for the FlexiBTS) can be TDM interface signal (e.g. E1, T1...), physical la
is raised._x000D_
_x000D_
The BTSOAM
commissioning filefixed
is corrupted or an incorrect SCF file hasif been detected during BTSdefined
startup apart
as is
follows:_x000D_
priority
_x000D_
The
Flexi selection has
Zone Micro FDD, is not
noticed but
that user-selectable.
the connected Furthermore,
radio unit already a signal
has listed
another in
radiothe FTM
master references not
fromreceived,
the FlexiaSystem
BASE SM
1. Commissioning
_x000D_
Toggling alarms data:Flexi
related thethe
to
Zone Micro TDD:_x000D_
commissioning
original faults file
are issuppressed
corrupted oruntil a parameter
the_x000D_ has a missing or incorrect value._x000D_
The
A
2. commissioning
module
RNW initialization
data: "RNW file download
has
has has been
failed._x000D_
wrong format", "RNW startedcould neither
not befrom BTS Site
parsed", "RNW Manager,
has wrong nor schema",
from NetAct during autoconfiguration.
"Validation A
failed due to incom
Flexi
toggling
_x000D_ Zone Micro
condition FDD, Flexi
is cleared._x000D_Zone Micro TDD:_x000D_
_x000D_
Radio
The GPS
_x000D_ Module
source has(ifdetected
provisioned) that requested
is the highest frequency
priority doesn't
reference fit to the capabilities
source. The GPS offeredsource is byconsidered
Radio Module.
to be unusable as a ref
_x000D_
The BTS
Severity
Flexi supports
BTSofFDD,
this BTS a ToP
FlexiFault or SyncE
BTSisTDD:_x000D_ reference source that
the same as the severity of the original_x000D_ have configurable priorities relative to each other through the "synchro
Flexi
toggling
ThealarmZone
cell BTSMicro
Fault
configuration FDD,isFlexi Zone Micro
not officially TDD:_x000D_
supported. Too many cells are assigned
An
The message
commissioning has
file isbeen received
missing, or an from the antenna
incorrect SCF file line.
hasThebeenantenna
detected linetoisthe Tx group of the radio module._x000D_
faulty.
during BTS startup as follows:_x000D_
_x000D_
_x000D_
An alarm message has been received
Flexi Zone Micro FDD, Flexi Zone Micro TDD:_x000D_ from the antenna line device. The antenna line operation is degraded.
1. Commissioning
cell configuration
The Radio data:
Module hasisdetected the commissioning
not officially file is
supported. condition
an overcurrent missing or a
The cell configured, parameter
on RS485 IUANT has
which has a antenna or
missing
port._x000D_ incorrect
paths in thevalue._x000D_
resourceList antenna paths
_x000D_
Some antenna line device is causing overload. Antenna line devices powered by the RS485 IUANT are out of order because of
The
2. RNWhighest
data:validated
"RNW not temperature
found", "RNW valuehas on wrong
the FSP board "RNW
format", exceeds the not
could threshold value."RNW has wrong
be parsed", schema", "Validation
- The mutual length difference of the parallel RP3-01/CPRI links toward one radio module is too large (more than 60 meters in O
-The
RF fan
sharing
speed hasis been
too low disabled with master
for successful WCDMA
detection. because
Another the mutual
detection attempt length
occursdifference
after thebetween
fan test the
timercables of the WCDMA
expires.
A long distance (high latency) between the FSM and antenna has been detected but the Distributed Site feature has not been e
The temperature on the FSP board has exceeded the critical threshold value.
Fan(s) are not running although the temperature (indicated by Tcontrol) is higher than the value of the T.start parameter in the B
Fan(s) speed is deviating too much from the requested control.
Fan(s) are running faster than requested.
4082:_x000D_
The source unit has reached the maximum number of reset retries, that is, the source unit cannot successfully finish start-up af
4082:_x000D_
_x000D_
The source unit has reached the maximum number of reset retries, that is, the source unit cannot successfully finish start-up af
4082:_x000D_
4083:_x000D_
_x000D_
The source
The
File source unit
system
4083:_x000D_ unit
accesshas reached
requests SW the
operations maximum
fallback
like file because
system number of reset
of a critical
mounting retries,
or problem
file opening that is,
hasthe
thathave source during
occurred
failed. unit cannot successfully
start-up after the SW finish start-up
update, af
that
_x000D_
_x000D_
The source
Flexi
4083:_x000D_ unit requests
Radio Module has SWdetected
fallback because
low downlink of a carrier
critical input
problem powerthatfrom
has the
occurred during start-up
Flexi System Module.after the SW update, that
4085:_x000D_
_x000D_
The
During
Transport source
reset,
SWunitonrequests
the BTS hasSW
the source fallback
detected
unit because
that
indicates antheRFneedof a critical
module problem
for connected
software tothat
thehas
fallback. occurred
system moduleduring start-upbyafter
is affected the SW
a power update,
cycle failurethat
and
4085:_x000D_
_x000D_
The summing
Transport SW service defaultunit
on the source configuration
indicates the hasneedfailed. for software fallback.
4085:_x000D_
The
Transport SW on the source unit indicates the need for to
master system module has lost optical connection the peer
software system module.
fallback.
Synchronization is lost when the system module is working as a synchronization slave system module. This usually indicates th
The fault indicates poor GPS antenna installation.
The GPS receiver is running a site/self survey.
There is no accurate position stored in the EEPROM.
The receiver is used in stored position but has been moved to a new position after that.
The GPS receiver has detected that one or more EEPROM segments have been found to be corrupted at reset and had to be s
Feeding voltage is disabled for the selected Antenna Line.
The HDLC link has been disabled for the reporting Antenna Line or IUANT port.
SW file validation against its signature has failed.
Phase synchronization has been commissioned at the btsSyncMode, but PPS and/or ToP reference clock has not become avai
Shared OptIF mode cannot be read/changed from/in FBBC card.
A failure has occurred in the connection to the configured Real-time Performance Management (RTPM) entity, for example, the
TRS IP configuring or re-configuring by RROM has failed.
External GPS/GNSS receiver module has lost the satellite visibility and and is currently operating in holdover mode.
The configured PHICH transmission power boost cannot be applied either partly or at all because of a lack of remaining power
The RIP (Received Interference Power) value per Physical Resource Block (PRB) of the cell for UL subframes exceeds the pre
In GTP-U supervision, a network element did not respond to the GTP-U: Echo Request message within time.
The transport path (SCTP) for connection to MME is broken. This might be because of an unplugged cable to MME. There is no
The transport path (SCTP) for connection to an adjacent BTS is broken. This might be because of an unplugged cable to the ad
One of the transport paths (SCTP) in SCTP connection to MME has failed. Only applicable when SCTP multi-homing is support
There was an opening, reading, or file content problem with a radio network_x000D_
configuration
A BTS raises file thisat theifBTS
fault startup or at
it experiences activationinofinternal
a problem delta configuration_x000D_
configuration_x000D_
file.
data BTS The detected
distribution problem
(cellfault
setup) canto be a file
C- and U-Planehandling problem
SW components. (for example,_x000D_
The raises this if it experiences
open, read, and write operations fail) as well as a content problemsa problem in internal configuration_x000D_
(for example,_x000D_
data
nofailure
A distribution
valid RAML2.1 (cell
has occurred setup)
format). to C-Plane and U-Plane SW components.
in the trace connection between the BTS and the iOMS or a third party tool._x000D_
_x000D_
There was an opening, reading, or file content problem with a BTS vendor-specific file at BTS startup._x000D_
The
A failure faulthas
is also detected
occurred when
during a vendor-specific fileofis trace
activation/deactivation missing.session (subscriber trace, cell trace, or interface trace session)._x0
_x000D_
The BTS has encountered a few possibly misconfigured PLMNs, which cannot be used by the BTS for accepting calls from new
In
_x000D_ case of subscriber trace, the possible reasons are:_x000D_
This
-These Thealarm indicates
Subscriber Tracethatfeature
the maximumis not numberatofthe
enabled LNADJ and/or LNADJL objects was exceeded in the eNB and that the new o
PLMNs that are considered misconfigured by BTS._x000D_
the BTS are:_x000D_
-- The
This Id used
alarm
currently for the that
indicates
configured subscriber BTStrace
a WCDMA
at the session
for neighbor
one or more is already
cell, which in is use
cells_x000D_ for another
reported by an UE active
via subscriber
ANR specific trace session._x000D_
measurements could not be stor
-This
formThe
- served number
of:_x000D_
alarm of
byindicatessubscriber
one or more that MMEs trace
a WCDMA sessions
and therefore at the BTS has
currentlywhich
neighbor relation, reached
broadcast the
by BTS's
is reported maximum
by a cells. number
However,
UE via of subscriber trace
none ofmeasurements,
ANR specific sessions
these PLMNs have couldsupporte
serving
not be
-neighbor
"A Handover
neighbour
_x000D_ at
cell the
WCDMA BTS is
cell
in the form:_x000D_ongoing
which for
is the
reportedUE to
by be
an traced._x000D_
UE due to activated ANR feature(s) could not be stored because the maximu
This
_x000D_
%d, alarm indicates
ecgiPlmnId: that
MNC= %s, a WCDMA
MCC= neighbor
%d})"._x000D_ relation, which is reported by a UE because of activated UTRAN ANR feature:_x0
All
"LTE
1) previously
has cell
not beenregistered
ECGI{ecgiAdjEnbId
stored inUEs
casein these
= the
%d, PLMNs
ecgiLcrId
actual number =remain unaffected.
%d, LNRELW
ecgiPlmnId = cell
{ %d, %d, %d}} , WCDMAcarriercell CGI(in{rncId= %d,profile)is
CellId= %d,equac
In case
A handover of cell/interface
target trace,
cell cannot theuniquely
be possible reasonsofbecause
selected are:_x000D_ per
several (LNCEL)
candidates per
are UTRAN
available for a certainANRPRW
PCI value and carrier
2)
-ThehasCell
The been stored
Trace but atisleast
feature one of LNRELW's
not enabled at the mobility parameters (psHoAllowed, srvccAllowed) has been set to 'forbidden',
BTS._x000D_
(limitbase
in station
3GPP has executed
36.331 (32)). baseband
_x000D_ board (FSP) recovery activities. All baseband boards are available again but not all c
- The Id used for the cell/interface trace session is already in use for another active cell/interface trace session._x000D_
The additional
- TheEARFCN
number of alarm
of an LTE
cell infoneighbor
and holds thecell
interface ARFCN
trace of the at
is sessions
a mapped affected
EARFCN
the BTS carrier frequency
according
has reached theasmaximum
to the well as the
MFBI-profile LNCEL ofand
cell LNRELW
configuration
number (that
and instance
is, the
interface tracenumb
requiremen
sess
"Affected
As a fault
This WCDMA
consequence,
occurs when ARFCN
HOCGI carrier
to this = %d,cell
neighbor
measurements LTE iscell
notECGI{ecgiAdjEnbId
indicate possible
that twoand call drop
or more = %d,
cellsrate ecgiLcrId
thatmight
operate =on
%d,
increasetheecgiPlmnId
ifsame is no=other
{ %d,use
there frequency %d,
suitable
the%d}} , WC
handov
same PC
This fault indicates that the estimated phase error of an eNB, which is in holdover, has exceeded the limit of 5 us.
The X2 interface reset has failed after several attempts. This indicates that a severe failure has occurred, for example there is s
There is no X2 connectivity to an adjacent BTS, the adjacent BTS has failed, and so on.
Flexi BTS FDD, Flexi BTS TDD:_x000D_
There
S1 interface is no S1 resetconnectivity
has failedtoafter an MME. several _x000D_
attempts. This indicates that a severe failure has occurred, for example there is some
_x000D_
The cell is deactivated
Fault is generated if S1 setup procedure has subsequently because S1 is unavailable (that is, none beenofattempted
the PLMNs and configured for the cell currently
failed "maxS1SetRetry" number have a serving M
of times._x000
provided.
_x000D_
The Otherwise, the period
S1 eNB configuration update procedure has failed._x000D_ length is set to 15 min. _x000D_
_x000D_
Flexi
_x000D_
A
Note: RIMZone request
Ais cell
Micro
is to FDD,
the serving Flexi Zone BSS S1 Micro
has TDD:_x000D_
failed after several attempts. This means that System Information for the is related GERAN
There
The MME nocouldS1considered
connectivity
not be informed toto haveanaboutMME, availability MMEwhen
themodification
the there
of at is
has failed, andat least
least so
one on.one
ofIftheconfigured
the PLMN
fault is canceled,
following of autonomous
the cell which
eNB configuration currently
recovery
data:_x000D_ serve
actions (r
availability.
-AeNB RIM Name_x000D_
association could not be established because a RIM Error PDU has been received or a RIM Application Error has been d
-System-Information-Broadcast-related
Supported TAs (TAC, PLMN Identities)_x000D_ parameters have changed more than 32 times within three hours.
-Diagnostic Default paging DRX
Files have been collected for an internal reason and are available in the BTS.
Physical memory supervision has detected that memory usage has exceeded 90%(FCM/FCT)/98%(FSP).
A non-correctable bit-toggling error has been detected in the critical DSP memory.
A fatal error of the DSP HWAPI SW has occurred._x000D_
_x000D_
A fatal error of the DSP Application SW has occurred._x000D_
Flexi
_x000D_ BTS FDD, Flexi BTS TDD:_x000D_
The
If an BTS
FSP hasthe purposely triggered a GPIO reset is forathe DSP._x000D_
Flexi
_x000D_ BTS in FDD, BTS Flexi generates
BTS TDD:_x000D_ this fault, there malfunction in_x000D_
a
The
If corresponding
an transport
FSP in thepart FSP
BTS of the sub-module._x000D_
generates BTS has thisbeen fault, reset
there atisthe a date and time
malfunction given in the notification._x000D_
in_x000D_
_x000D_
If
_x000D_ all FSPstogenerate this fault, there isbeena malfunction in thethe FSM._x000D_
a
A
Flexi corresponding
change
Zone the
Micro FDD, FSP
BTS IPsub-module._x000D_
settings
Flexi Zone has Micro received
TDD:_x000D_ from BTS Site Manager. To activate the change, the BTS needs to be re
_x000D_
1.FSMr2
If all FSPs supports
generate the this following
fault, cause
there is formalfunction
a the reset:_x000D_ in the FSM._x000D_
If
The
Flexi
_x000D_ an alarm
FSP
Zoneinis the
MicroraisedBTSFDD,if generates
the Flexi BFD thisMicro
service
Zone fault, there
is TDD:_x000D_
not is a malfunction
available anymore on in thethe whole
BTS for BTS.all BFD sessions belonging to that BFD group.
_x000D_
If
"trs
Loss
Flexi anpower-on
FSP inMicro
of frame.
Zone the ItBTS
reset":
is not
FDD, generates
Coldpossible
Flexi startZone this
:to_x000D_ fault,traffic
carry
Micro thereon
TDD:_x000D_ is the
a malfunction in the whole
interface referenced BTS.
in the alarm text. All other transmission alarms related
"trs
If an watchdog
FSP
Flexi BTS FDD, Flexi BTS TDD:_x000D_ in the reset":
BTS System
generates overload_x000D_
this fault, there is a malfunction in the whole BTS.
"trs
Probable
No startup
signal isfailure":
cause receivedfor E1 Failure
oninterfaces:
theinduring
interface startup
The referenced _x000D_
interface atinthe
thefar end text.
alarm is notAllconfigured to be a framed
other transmission alarmsE1related
interface.
to this signal are suppre
A
"trs dead peer
software was
failure":detectedSoftware one of the
failure_x000D_ IPsec associations of the FTM._x000D_
_x000D_
There is no response tointerfaces:
the requests
"trs
Probable
Flexi
Probable management
BTS cause
FDD,
causes for reset":
Flexi
for T1 BTS
Ethernet Reset
TDD: Thesent
triggered
interfaces:_x000D_ bytomanagement
interface theatpeer, either
the far end during
is not the
interface:_x000D_ IKE SA to
configured setup,
be a the IPsec SA setup or during DPD._x000
T1 interface.
Note:
"trs
The When
fallback":
small IPSec
Fallback backup tunnel
executed_x000D_ feature is enabled, this alarm should not be raised duenot failures
to whensecurity
trying torequirements.
setup primar
-_x000D_
Primary a cable isform-factor
and cut or therepluggable
secondary is
timingno cable (SFP)
source connected module
lost. Thetodetected
LTE in the on
theisinterface_x000D_
running interface
internalconnector
clock or in does
hold-over comply
modewith and no timing signal is sen
_x000D_
-One the ofelectrical signal is excessively attenuated_x000D_
Possible
FSMr3
Flexi Zone reasons:_x000D_
the Micro
supportssynchronisation
the
FDD, following
Flexifar sources
cause
Zone in
Microfor the the
TDD: configured
reset:_x000D_ priority list is unavailable.
-This
The
-This the port
first
a cable
can atcut
and
is
be the
second
the or connected
there
primary synchronization
isorBTS
no end
thecable
secondary node sources
connected is switched
clock from
toissource.
the off_x000D_
the configured priority list are unavailable. On failure, the LTE switches auto
interface_x000D_
_x000D_
The
_x000D_ small
alarm form-factor
is raised if pluggable
the (SFP)
cannot module
update the not supported,
Certificate not present,
Revocation or could
List (CRL). not berefer
Please recognized.
PDDB parameter CERTH::CR
-The
"trs thepower-on
signalform-factor
small is excessively
reset": Cold
pluggable attenuated_x000D_
start_x000D_
(SFP) module detected in the interface connector does not comply
Flexi
Probable
A
-The
In Zone
loopback
the
the port
alarm:at Micro
cause:
isthe FDD,transmission
The
requested
connected Flexi
forfaranZoneEthernet
end Micro
links selected
node TDD:_x000D_
interface
is switched for clock
either
off source
locally are BTS
at the faulty.orThe
the reason
Link OAM canclient of with
be alarms theon the
BTS theSFP setmodule
isinterfaces types
(for
into loopbackexa
"trs
No watchdog
SFP
signal module
is reset":
received was onSystem
expected
the overload_x000D_
by
interface the SW,
referenced but found
in themissing.
alarm text. All other transmission alarms related to this signal are suppre
Protocol
On
"trs
Probable an
software can
interface
causes: be forPDH,
failure": which Timing
Software over
the Link Packet
OAM
failure_x000D_ (ToP) and Synchronuous
functionality was switched on, ethernet.
no Link OAM PDUs were received during the period spe
_x000D_
-"trs
A
Probable No management
SFP
Link OAM module
causes PDU for reset":
is inserted
containing Reset at triggered
the
Ethernetainterfaces:_x000D_ SFP-based by management
Ethernet interface_x000D_
interface.
critical link event flag was received on the Ethernet interface. The alarm is raised with the first de
Unit
-"trs The Number
spurious
SFPismodule's is optional:
reset": Reset
interface reason
contacts detection are failed_x000D_
corroded
--For
A amalfunctioning
cable
PDH and cut or there
of
Synchronousthe is
SFP no cable
transceiver
Ethernet, connected
Unit was to theisor
detected.
number
dirty, preventing either read access to the SFP module at the time of rea
interface_x000D_
0 or 1.
-_x000D_
The
-Excessive
The The
the SFP
following
electrical module critical
signal type link is not
events
isaexcessively supported.
are possible:
attenuated_x000D_
-It
-2. is SFP
not
"$date"
hasbit reported
present error for Timing
is rate. anThe
transmission
Over
measured Packet(TOP).faultbitPeriodcondition
error rate and has disabled
exceeds the threshold the laser
valuetransmitter.
of BER-3
Errored(10E-3).
- Critical the atformat
portEvent: the either local
connected time
far stamp
Errored endSymbol node (GMT+/-xx:xx)
is switched .off_x000D_
Event,E.g:an2014-04-12
Errored Frame 00:51:26
Event GMT+0530_x000D_
an Frame Period Event or an Errored
_x000D_
-The
Loss
_x000D_ Dyingfault is generated
of Gasp:
multiframe. eitherThe the only localwhen
interface or the the interface
remote
referenced inisthe
peer not
has configured
a fatal
alarm texterror
has asand LMP
lost is
the(that
about is,togenerated
multiframe restart. only when the interface is configured
alignment.
The
Probable
-Alarm Linkinterface
Fault: causes:
thevaluelocal ispeeroptional: has detected a physical link fault byin receiving direction, e.g.device
a LOS.
The
-ProbableForfault
the PDH
signal isthe
indication generated
level valuesignal
is toorangeonly
low when
is received.
depends
(optical the This
oninterface
signal
the is
is not
hardware configured
generated
unitaretype: aselectrical
an
1..16 LMP (that
intermediate is,PDH
generated only
in thewhen the interface
forward direction is configured
because it d
cause: the interface type connectors
has not been or cables
configured dirty,
to meet the framingconnectors or cables
of the interface atare
thecorroded)
far end. For E1 interfaces
- the
Remote For specified
Synchonuous
defectmaximum Ethernet
indication. It isthe
length sentofvalue
the
by cable range
the is=exceeded
1..3
intermediate or the far end equipment because it detects a serious fault in the receive
All
-Unit It other
the not transmission
ismissing.present
connector is for
not alarmsover
Timing
properly related Packet.
connected to this to signal
the unitare suppressed.
The slot has been configured to hold a unit but the plug-in_x000D_
-unit theisreceiver
Probable not cause: or the
physically Thefar farend
present endtransmitter
has
in the a slot._x000D_
LOS, has LOF failedor AIS alarm on its receiving interface.
Probable
The alarmcause: is triggered There is a transmission
whenever a service problem
OAM error somewhere
related to in the
the transmission
intermediate network and AIS is sent instead of user traffic.
_x000D_
of Continuity Check Messages (CCM) persists on aAIS given Ethernetitinterface
When
Probable a MEP receives
causes:_x000D_ a valid ETH-AIS frame and is enabled, shall trigger an AIS alarm containing the following informati
as soon as
-receiving one interface
of the error condtions below occurs.
_x000D_
Five consecutive
The following alarms failed arelogin attempts to the FTM have been performed.
defined:
-A the -MD
unit levelbeen
has configured
1)requested
MDL_MISMATCH,
-Source certificate
MAC address priority
could not 5 but benot
(highest detected_x000D_
retrieved priority): from CCMthe is receivedauthority
certificate with MDL (CA).
-A the
lower unit
than
requested is broken
the highest
certificate and therefore
configured
could not not
beone detected_x000D_
in
renewed the BTS
from and
the not matching
certificate any
authority of (CA).
The
-the alarm
theconfigured
unit has is raised
been if the alarmbut
configured is enabled,
some other theunit BFDisstate for the session is not AdminDown and nevertheless no BFD packet is
detected_x000D_
NOTE: In FSMr2, ones. pure number interface arethe used (eg. 1,2,3). But for FSMr3 unit types, interface is provided as: from
"module type n
_x000D_
The
Ex:
A alarm
CCM
requested is
fault raised
level
certificate if the
- prio could alarm
5 BTS,
cause
not beis enabled,
MDL_MISMATCH
retrieved BFD
as the numberstate of the session
of"interface
certificates is received
not AdminDown and the
from repository BFD
server packet
(RA) or the far
certificate end
au
NOTE:
NOTE: In Flexi
unitindicates Zone
variable should Micro interface
be5:replaced is provided
by appropriate as: EIF
HW which
namesisconfigured number". (unitTypeConfigured)
2)
This MAID_MISMATCH
alarm priority
that there isCCM a mismatchis received between with MDL BTS configuration configured
and auto-negotiation result.during runtime reporting.
in
The theRTTBTS, but withalarm
threshold MAIDisnot sent matching
in case any the MA average configured
value of in the
the RTTBTS exceeds_x000D_
on
this
the MDL.
configured threshold. shall be sent in case the configured value of PLR is exceeded.
The
Ex:CCM PLR faultthreshold level 5alarm prio 5 cause MAID_MISMATCH
3) MAID_MISMATCH
BTS shall report this alarm priority 5:CCM
if the NTPisserver received is not with matchingorMDL
accessible if theand NTP MAID,
server cannot be used._x000D_
but the
Note 1: VLAN
Filtering membership
time is not of the to
used received
clear the frame does not match the VLAN configuration of the addressed MA.
alarm._x000D_
Ex:CCM
Note fault level
2: Filtering time 5 prio
is not 5 cause
applicable MAID_MISMATCH
for FSMr2._x000D_
4)may
It ERR_CCM,
take up to priority
1 minute 4:CCM is received
to raise the alarm withon knownFSMr2. MDL and MAID, but MEPID
is not configured in the Remote MEP list of the MA.
Ex: CCM fault level 5 prio 4 cause REMOTEMEP_NOT_CONFIGURED
5) ERR_CCM, priority 4: CCM is received with known MDL, MAID and MEPID,but CCM interval coded in the received CCM doe
The BTS shall raise a "Vendor BTS certificate due to expire" alarm when the Vendor BTS certificate is about to expire._x000D_
_x000D_
NE stores trust anchors for its own trust chain and for peers. When own or any trust anchors are about to expire/expired this al
The period of notification in advance is configurable and the same as for CA certificate expiry._x000D_
FTM
_x000D_ Fault, for which fault name is mentioned in the Fault name field, is toggling in the FTM. Toggling fault condition is informed
Fault._x000D_
1
Inday case...the
4999 days with
incoming SSM default
is not 1825
receiveddays._x000D_
for a certain time period (configured via "ssmTimeout" parameter) this an alarm is rais
This alarm is raised when the received SSM indicates lower clock quality (e.g. "do not use" or "EEC") than required.
The reference clock monitoring has detected a loss of ToP reference clock signal received from the master clock behind $IP.
-During
The eNBthe does
BTS IP notaddress
receiveconfiguration
a reply from ToP Master
the BTS within
tests a certain
the direct time (5
attached sec) upon
network it hasother,
whether sent a sync request
already message
configured BTSs, on
-warning
The eNB receives
shall contain fromthe ToP Master
corresponding a granted
IP message
address. For rates
each (sync
DAD message
event a rate,
separate delay message
reporting shall rate),
be that does not match
indicated._x000D_
SW does not support the detected HW unit type._x000D_
_x000D_
BTS has entered IPsec emergency bypass active state.
Probable
BTS causes:_x000D_
has entered IPsec emergency bypass active state where
The
_x000D_base station is currently capturing IP traffic towards a localconfigured
port or intoIPsec
a file policies are ignored
on the base station. and all traffic is sent unprot
ifThis
thealarm
- The traffic
system capturing
module's
will isSW
be triggeredhappening
when attowards
version isleast a local
too old_x000D_
one port,
primary port tunnel
IPsec and destination mac has
fails and BTS address needs
switched to be
over to provided.
secondary IPsec tunnel.
Port values
- Supported
As can
a result ofHW be LMP
variant
failure or
in atnot < HW MODULE
present
least in system
one primary NAME >-<PORT
module
IPsec ID>.
tunnel, BTS has automatically switched over to secondary IPsec tunnel termin
i.e LMP or FSM-EIF1, FSM-EIF2 or FTIF-EIF1
Meaning in release RL60
The temperature of a unit exceeds the threshold value.
Software update in the module or submodule has failed.
The reference frequency that the BTS master clock receives has changed by about 0.2 ppm or more (which equals the change
_x000D_
Connection to a module that belongs to the BTS configuration has been lost.
The cause of the alarm might be:_x000D_
A module initialization has failed._x000D_
_x000D_
1. The reference
FCM/FSP frequencyhas
synchronization hasfailed._x000D_
changed because of a fault in the transmission network synchronization (which in turn is cause
reference synchronization. The
A new module with incompatible SW hasalarm canprobably
also be activated if the in
been inserted faulty reference synchronization is corrected and there is agai
the BTS.
_x000D_
A new
2. The module
referencewith incompatible
frequency SW has
fluctuates probably been
continuously inserted
because in the amount
of a great BTS. of jitter/wander in the transmission network. The
G.823/824/825._x000D_
The SNTP time cannot be fetched from the transport system (FTM) within the time limit.
_x000D_
3. If the BTS-integrated transport part receives the synchronization information via the 2.048 MHz synchronization input (extern
The downloaded SW is corrupted or incorrectly formed.
case._x000D_
_x000D_
4. There isisan
A module equipment
blocked fault Site
with BTS in the BTS. The equipment fault is, however, not the most common reason. Normally, the reason
Manager._x000D_
_x000D_
The user has blocked the cell with BTS Site Manager.
The purpose is to avoid fault indications that might be raised during the module maintenance task.
The BTS is blocked with BTS Site Manager. The purpose is to avoid fault indications that might be raised during a BTS mainten
The unit or module has been tested during the BTS power-on self test (POST) and a failure has been detected.
A unit cannot be identified by its product code or by its physical device address (object ID).
A non-supported unit has been detected in the System Module. Typically, this happens when a new unit version is installed whil
A flash memory operation failure. If this alarm continuously appears, the flash chip might be broken.
A flash memory operation failure. If this alarm continuously appears, the flash chip might be broken.
A flash memory operation failure. If this alarm continuously appears, the flash chip might be broken.
A flash memory operation failure. If this alarm continuously appears, the flash chip might be broken.
A flash memory operation failure. If this alarm continuously appears, the flash chip might be broken.
Synchronization between the FCM/FCT and FSP is lost.
The operating system (OSE) goes into the error handler with a fatal status. The cause can be, for example, an out of memory s
_x000D_
Antenna (RP3) link is down: transmitter or receiver drops from synchronization.
If only one FSP in BTS generates this fault, there is malfunction in one of the FSP submodules. If all FSPs generate this fault, th
High or low voltage on the external alarm line.
High or low voltage on the external alarm line.
The user specifies the fault text during commissioning.
High or low voltage on the external alarm line.
The user specifies the fault text during commissioning.
High or low voltage on the external alarm line.
The user specifies the fault text during commissioning.
High or low voltage on the external alarm line.
The user specifies the fault text during commissioning.
High or low voltage on the external alarm line.
The user specifies the fault text during commissioning.
High or low voltage on the external alarm line.
The user specifies the fault text during commissioning.
High or low voltage on the external alarm line.
The user specifies the fault text during commissioning.
High or low voltage on the external alarm line.
The user specifies the fault text during commissioning.
High or low voltage on the external alarm line.
The user specifies the fault text during commissioning.
High or low voltage on the external alarm line.
The user specifies the fault text during commissioning.
High or low voltage on the external alarm line.
The user specifies the fault text during commissioning.
High or low voltage on the external alarm line.
The user specifies the fault text during commissioning.
High or low voltage on the external alarm line.
The user specifies the fault text during commissioning.
High or low voltage on the external alarm line.
The user specifies the fault text during commissioning.
High or low voltage on the external alarm line.
The user specifies the fault text during commissioning.
High or low voltage on the external alarm line.
The user specifies the fault text during commissioning.
The user specifies the fault text during commissioning.
High or low voltage on the external alarm line.
High or low voltage on the external alarm line.
The user specifies the fault text during commissioning.
High or low voltage on the external alarm line.
The user specifies the fault text during commissioning.
High or low voltage on the external alarm line.
The user specifies the fault text during commissioning.
High or low voltage on the external alarm line.
The user specifies the fault text during commissioning.
High or low voltage on the external alarm line.
The user specifies the fault text during commissioning.
High or low voltage on the external alarm line.
The user specifies the fault text during commissioning.
High or low voltage on the external alarm line.
The user specifies the fault text during commissioning.
High or low voltage on the external alarm line.
The user specifies the fault text during commissioning.
BPF file or optical interface FPGA file is invalid or missing. The FSP MCU SW file is invalid or missing.
The user specifies the fault text during commissioning.
Communication with an application failed. It has not replied to the message that has been sent/resent to it.
The requested channel in the startup phase is not acceptable for the BTS hardware, because of an incorrect frequency band an
The baseband bus related configuration of <x> was rejected by the HW SW, DSP, or RF SW.
The baseband bus synchronization towards <x> failed.
The OCXO warm-up takes too long and the OCXO does not become active within a period of eight minutes from the power-on.
The OCXO adjustment area is reaching its limit value. The DAC word value of the OCXO is lower than 205 or greater than 3891
The output signal of the OXCO is missing and the FCM/FCT cannot deliver the 30.72 MHz System Clock required by the other
A request to retrieve the public IP address information of the FCM/FCT from the FTM fails.
The temperature measured from sensor specified in "Temp.Cold.Start.Sensor" (= FSP)is less than "Temp.Cold.Start.Limit"
The
The BTS cannot
Masthead start properly,
Amplifier (MHA) because
does not the FSPs
work cannot
properly. bereceived
The poweredRF
upsignal
at too level
cold conditions.
is decreased.
The Masthead Amplifier (MHA) does not work properly. The received RF signal level is decreased.
If both stages of the LNA on the uplink path fail, the MHA swithes the LNA to by-pass mode. In by-pass mode, the MHA has no
Radio
or just Module
one (60W RRH) or Filter (all others) has detected overcurrent on the antenna line. The antenna line might be damage
of them.
If both stages of the LNA on the uplink path fail, the MHA swithes the LNA to by-pass mode. In by-pass mode, the MHA has no
VSWR
branches value exceeds
or just one ofthe defined level. The antenna line is mismatched or damaged.
them.
Radio Module (60W RRH)/the Filter (all others) has detected a VSWR value exceeding the defined level. The antenna line is sl
The filter has detected a malfunction in the LNA unit.
A fault in the Masthead Amplifier (MHA) is detected. The fault reduces the gain performance or completely prevents the MHA fro
The device is not working properly, the configuration is not valid, or a given parameter is incorrect.
The device is not working properly, the configuration is not valid, or a given parameter is incorrect.
The device is not working properly, the configuration is not valid, or a given parameter is incorrect.
The device is not working properly, the configuration is not valid, or a given parameter is incorrect.
The SRAM memory operation failure. If this fault appears continuously, the SRAM chip might be broken.
The SRAM memory operation failure. If this fault appears continuously, the SRAM chip might be broken.
The reference clock monitoring has detected a loss of 2.048 MHz signal received from an external reference source, connected
The RF Module configuration failed because of HW or SW fault.
A critical configuration file is missing from the RF Module.
The RF Module SW detected that a non-critical configuration file is missing.
The System Module clock reference differs from the RF Module clock.
The baseband bus between the System Module and RF Module is out of synchronization.
The RF Module baseband bus is configured incorrectly.
There is an error in the baseband or optical bus.
The RF Module TX path is not usable.
The TX output power adjustment failed.
The RF Module filter has measured too low TX power.
The RF Module RX RF synthesizer is not locked.
The RF Module is out of order because of a software or hardware fault.
The Power Supply has detected an overvoltage, undervoltage or overcurrent in the RF Module.
The feedback signal to predistortion is too weak or missing. The TX performance is degraded.
The TX signal adjustment fails.
During RF startup: The temperature inside the RF Module is too low. Heating of module is ongoing. Wait until the alarm is cance
The permanent memory in the module is corrupted and the module product code or serial number is missing, or the module pro
During RF runtime: The temperature inside the RF module is going too low. Problem might occur.
The RF Module SW detected conflicting or corrupted configuration data.
An RF Module power-on self-test failed at start-up.
The RF Module lost lock to the incoming clock.
The highest temperature exceeds the power decrease limit.
The FPGA software update has failed.
A shared (Medusa) FR is blocked.
Radio Module cannot identify the used fan type or the fan is not installed at all.
Fan(s) are not running.
Fan(s) are rotating slower than requested.
Fan(s) rotate faster than requested.
Validated module temperature is higher than the predefined maximum allowed value.
Validated sensor temperature is greater than or equal to the predefined value on unit property file.
The validated temperature of any PA sensor is higher than or equal to the predefined value on unit property file.
Increased bit error rate has been detected on the optical link to radio module which results in sporadical LCV errors in downlink
Abnormally high bit error rate has been detected on the optical link to radio module which results in permanent baseband proce
Antenna line has been disabled to protect HW
FR module detected permanent RP3 routing collisions either in downlink (TX), or in uplink (RX) transmission direction.
The Small Form Factor Pluggable (SFP) malfunction has occurred, or the SFP module is not physically present (there is no elec
The Small Form Factor Pluggable (SFP) malfunction has occurred, or the SFP module is not physically present (there is no elec
The incoming optical signal to the Small Form Factor Pluggable (SFP) is missing, too weak, or the fibre cable has been detache
The fibre cable has an interference; the data becomes faulty.
The connection between the System Module and the RF Module units (Linear Transceiver, Antenna Filter or Antenna Line Devi
The RP3 channel lost the frame synchronization state that it had achieved.
A physical connection failure between the optical interface and the summing function (caused by bad circuit joints, for example)
#N/A
The RP3 or Ethernet buffering is not working, and the buffer becomes full. The optical device is malfunctioning. The fault might
The RP3 or Ethernet buffering is not working, and the buffer becomes full. The optical device is malfunctioning. The fault might
The control message traffic between the modules is malfunctioning.
Synchronization to the clock control unit frame pulse has been achieved earlier, but it differs from the currently received frame p
The master frame in the received baseband bus frame is not in the correct place related to the internally generated master fram
A decoding error has been detected in the baseband internal link. The data packet is lost, or the content is corrupted._x000D_
_x000D_
There is a baseband bus address mismatch in the summing. There are two possible causes:
This situation is also triggered when the links do not synchronize with each other.
The frame alignment is lost or the frame burst has a CRC error when the_x000D_
1. A configuration
System Module is error
working(two different baseband units functioning) - after an acknowledgement the fault returns.
The frame alignment is lostas
or athe
synchronization slave
frame burst has system
a CRC errormodule._x000D_
when the_x000D_
System
2.
Clock Modulebuffer
Datacrossing is working
corruption as -aappears
on underflow
the bus synchronization
or overflow RXslave
onceinwhen system module._x000D_
unsynchronized
block and the data is
received sent
data by the
might be baseband.
not valid. The fault is an indication of ei
The SW update to the BTS has failed or BTS SW corrupted.
Baseband bus message multiplexing slot for the message is not possible to be fulfilled.
If a message does not get routed, an interrupt is generated._x000D_
_x000D_
Summing checks headers of the messages to be summed. If the header is none of the allowed types, no summing is performed
Considered normal when Faradays are starting up and RP3 sync done.
Transmitter detected an RP3 message from a summing coincident with a transmission rule.
Transmitter detected more data coming from a summing than the current link rate can support.
The FlexiBTS has detected an abnormal operation or a failure in the internal functionality of the System Module._x000D_
_x000D_
The BTS has detected an abnormal operation or a failure in the BTS replaceable_x000D_
baseband unit.
This BTS fault indication is generated if the reference clock monitoring function of the BTS does not receive the highest configu
matter
Too many whatLCRsthe lower level source statuses
are commissioned to one RF are.
Module.
The BTS detected
Background an RF Module that cannot be put into use without a BTS reset. The RF Module type differs from the previous
information:
_x000D_
There
Because is aoffixed synchronization
TX path failure MIMOpriority list Input
(Multiple in the Multiple
FlexiBTS: Output) functionality is not operational or is degraded in the cell relate
FSP overheat occurred. Restoring the FSP normal temperature and resetting BTS is needed in order to put the card back into u
The power level defined in the RNW file is not supported by the HW.
_x000D_
-Priority 1: PPS (Pulse Per Second) signal connected to the Synchronization Input interface (Sync In) of the System Module. No
startup:
BTS has No FSP
detected units detected
communication by the time
problem RP3GPS
with the configuration starts._x000D_
receiver._x000D_
_x000D_
-Priority
The 2: external
baseband 2.048MHz
bus related SRIO signal connectedfor
configuration toFaraday
the Synccore In interface.
was rejected by the platform SW.
The BTS
Fault detected
is ignored anthe
until FSP Module
GPS thathas
receiver cannot be put
reached theinto use without astate.
commissioned BTS reset. The FSP Module product code differs from t
Connection to the DSP submodule has been lost or the submodule reports an error situation.
-Priority 3: the reference signal coming from the integrated transmission unit (FTM).
Internal Maximum Transfer Unit (MTU) configuration failed on FCM or FSP.
Normally,
BTS Fault,allwhich
the FlexiBTS
fault name sources are not in
is mentioned in the
use"Fault
at thename"
same timefield,(itisdepends onthe
toggling in theBTS.
network planning
Toggling alarmand BTS configuration).
condition is informed
generate
Fault. a fault. During runtime operation, the BTS fault functionality runs autonomously -
Commissioning file download has been started neither from BTS Site Manager, nor from NetAct during autoconfiguration. notices also added/vanished source
Autoc
The source
The commissioning file is(which
for the FTM missing, or an
is the incorrect
priority SCFfor
3 source filethe
hasFlexiBTS)
been detected
can beduring BTS startup
TDM interface as follows:
signal (e.g. E1, T1...), physical la
priority selection
FSM should is not
be the radiofixed but user-selectable.
master for RFSW, but noticesFurthermore,
that RFSW if a signal
alreadylisted
hasinanother
the FTM references
radio is not received, a BASE S
master defined.
1. Commissioning data: the commissioning file is missing or a parameter has a missing or incorrect value.
2. RNWhas
A filter data:
not"RNW not found",
been able to tune"RNW
on an has wrong format",
appropriate "RNW
sub-band could(tuning
properly not befailure),
parsed",or"RNW hasmajor
another wrong schema",
failure "Validation
has been detecte
An alarm message has been received from the antenna line. The antenna line is faulty.
An alarm message has been received from the antenna line device. The antenna line operation is degraded.
Radio Module or Filter (all others) has detected overcurrent on RS485 IUANT
port. Some antenna
The highest validatedline device is causing
temperature value onoverload.
the FSP Depending on HW
board exceeds theimplementation
threshold value.antenna line devices powered by the R
-Overcurrent
The parallelwasRP3-01 linkson
detected towards
RS485one radioport.
IUANT module have
Some too large
antenna line mutual
device length difference
is causing (more
overload than 60exists
or shortcut meters).
on The
port.main
Ante
-Fan
RF speed
sharingis has been disabled on master WCDMA.
too low for successful detection. Detection attempt takes place again after the fan test timer expires.
A long distance (high latency) between the FSM and the antenna has been detected, but the Distributed Site feature is not enab
Temperature on FSP board exceeds critical threshold value.
Fan(s) are not running although the control is higher than 0.
Fan(s) speed is deviating too much from the requested control.
Fan(s) are running faster than requested.
4082:
Source
4082: unit reached maximum number of reset retries, that is the source unit cannot finish successfully start-up after SW updat
Source
4082: unit reached maximum number of reset retries, that is the source unit cannot finish successfully start-up after SW updat
4083:
Source
Source
File unit
unit reached
System requests maximum
SW fallback
access operations number
likedue
file toofcritical
resetmounting
System retries,
problemthat is the
which
or file sourcefailed.
occurred
opening inunit cannotafter
start-up finish
SW successfully
update, thatstart-up after SW data
is configuration updatm
4083:
Source
Flexi
4083: unit Module
Radio requestshasSWdetected
fallback lowduedownlink
to criticalcarrier
problem which
input power occurred in start-up
from the after SW
Flexi System update, that is configuration data m
Module.
4085:
Source
BTS hasunit
Transport requests
detected
SW RFSW
on source fallback
module
unit powerduecycle
indicates to critical
need failureproblem which
and is trying
for software occurred
to
fallback. recoverinfrom
start-up after SW
the failure update,
during BTS that
resetisprocedure.
configuration data m
4085:
BTS reset will last longer due to additional actions performed by BTS to recover from faulty situation.
Summing service
Transport default unit
SW on source configuration
indicates needhas failed.
for software fallback.
4085:
The master system module has lost optical
Transport SW on source unit indicates need for softwareconnection tofallback.
the peer system module.
Synchronization is lost when the System Module is working as a synchronization slave System Module. This indicates usually th
Poor GPS antenna installation
The GPS receiver is running a site/self survey
There is no accurate position stored in EEPROM.
The receiver is used in stored position but has been moved to a new position after that.
GPS receiver has detected that one or more EEPROM segments have been found to be corrupted at reset and had to be set to
Feeding voltage is disabled for selected Antenna Line.
HDLC link is disabled for reporting Antenna Line or IUANT port.
SW file validation against its signature failed.
#N/A
#N/A
Application of LTE505 feature related transport network configuration or re-configuration has failed.
#N/A
Configured PHICH transmission power boost cannot be applied either partly or at all due to a lack of remaining power after con
#N/A
In GTP-U supervision, a network element did not respond to the GTP-U: Echo Request message within time.
The transport path (SCTP) for connection to MME has broken. The reason for this can be an unplugged cable to MME. No tran
The transport path (SCTP) for connection to an adjacent BTS has broken. The reason for this might be an unplugged cable to t
One of the transport paths (SCTP) in SCTP connection to MME has failed. Only applicable when SCTP multi-homing is support
There was an opening, reading, or file content problem with a radio network configuration file at the BTS startup or at activation
RAML2.1
BTS raisesformat).this fault if it experiences a problem in internal configuration
data raises
BTS distribution (cellifsetup)
this fault to C- andaU-Plane
it experiences problemSW components
in internal configuration
data distribution (cell setup) to C-Plane and U-Plane SW components.
This fault defines a failure in the trace connection between the BTS and the iOMS or a third party tool._x000D_
_x000D_
There was an opening, reading, or file content problem with a BTS vendor-specific file at BTS startup.
Failure has occurred during activation/deactivation of Trace Session (Subscriber trace or Cell trace or Interface trace session)._
_x000D_
BTS has encountered few possibly misconfigured PLMNs that cannot be used by BTS for accepting calls from new UEs selecti
In case of Subscriber trace, the possible reasons are:_x000D_
This
-These alarm indicates
Subscriber Trace that the maximum number
enabledofat LNADJ and/or LNADJL was exceeded in the eNB and that the new object wa
PLMNs that feature has
are considered not been
misconfigured bythe
BTSBTS._x000D_
are:
-#N/A
- Id used for
currently the subscriber
configured at BTS trace session
for one is already
or more cells in use for another active subscriber trace session._x000D_
-#N/A
Count of subscriber trace sessions at
- served by one or more MMEs and therefore currentlythe BTS has reached the maximum
broadcast number of subscriber trace sessions supported by t
by BTS's cells
- Handover
but none of at
theseBTSPLMNs
is ongoing
have for the UEMME(s)
serving to be traced_x000D_
with relative capacity greater than zero. Because of this, BTS cannot select any
#N/A
_x000D_
In
A case of Cell/Interface
Allhandover
previously target
registered trace,
cell cannot
UEs in the
be possible
uniquely
these PLMNs reasons
selected
remain are:_x000D_
because several candidates are available for a certain PCI value and carrier
unaffected.
-Base
Cell station
Trace feature has not been enabled at the BTS._x000D_
executed baseband board (FSP) recovery activities. All baseband boards are available again but not all cells could
- Id used for the cell/interface trace session is already in use for another active cell/interface trace session._x000D_
The EARFCN
- Count of cell of a LTE
and neighbor
interface tracecell is a mapped
sessions EARFCN
at the BTS according
has reached thetomaximum
the MFBI-profile
numberconfiguration, that is, trace
of cell and interface the requirement
sessions s
As
#N/Aa consequence HO to this neighbor cell is not possible and call drop rate might increase in case no other suitable handover
#N/A
The X2 interface reset has failed after several attempts. This indicates that a severe failure has occurred, for example there is s
There is no X2 connectivity to an adjacent BTS, the adjacent BTS has failed, and so on.
There is no S1 connectivity to an MME, the MME has failed, etc. If the fault is canceled, autonomous recovery actions (reset) so
S1 interface reset has failed after several attempts. This indicates that a severe failure has occurred, for example there is some
Cell is deactivated due to no S1 availability (that is, none of the PLMNs configured for the cell have a serving MME currently) fo
Otherwise,
S1 eNB configuration the period update length isprocedure
set to 15 has min.failed.
A
Note: RIMArequest
cellcould to the serving
is considered BSS S1
to have failed after several
availability when attempts.
there atThis
is one leastmeans
one that System
configured Information for which
the related GERAN neig
The MME not be informed about modification of at least of the following eNBPLMN of the cell
configuration data: is currently serve
S1
-An eNBavailability.
RIM association could not be established because an RIM Error PDU has been received or an RIM Application Error has be
Name
-System Supported TAs (TAC,
Information PLMN Identities)
Broadcast related parameters have changed more than 32 times within 3 hours.
-The Default paging DRX
technical log buffer has been frozen in the BTS for an internal reason.
Physical memory supervision detects that usage of memory has exceeded 90%(FCM/FCT)/ 98%(FSP).
Non correctable bit toggling error is detected in the critical DSP memory.
#N/A
#N/A
#N/A
The transport part of the BTS has been reset at the date and time given in the notification.
A change to the BTS IP settings has been received from the BTS Site Manager. To activate the change, the BTS needs to be re
1.FSMr2 supports the following cause for the reset:
The alarm is raised if the BFD service is not available anymore on the BTS for all BFD sessions belonging to that BFD group.
"trs power-on
Loss of frame.reset": It is not Cold start :to carry traffic on the interface referenced in the alarm text. All other transmission alarms related
possible
"trs watchdog
No signal is received on the interfacereset": System overloadreferenced in the alarm text. All other transmission alarms related to this signal are suppre
"trs startup
Probable failure":
cause for E1Failure during The
interfaces: startup interface at the far end is not configured to be a framed E1 interface.
A
"trs dead peer was
software failure":detected
Software in one of the IPsec associations of the FTM.
failure
Probable causes for Ethernet interfaces:
"trs
Probable
The
-Possibly management
smallis
a cable cause
cut orfor
form-factor reset":
there isReset
T1pluggable
interfaces:
no cable triggered
The
(SFP) by management
interface
module
connected atthe
theinterface
todetected interface:
farinend
theisinterface
not configured
connector to be a T1
does notinterface.
comply with security requirements.
"trs
-- the
Primary fallback":
electrical
and Fallback
signal
secondary executed
is excessively
timing source attenuated
lost. ThetoLTE
a cable is cut or there is no cable connected theisinterface
running on internal clock or in hold-over mode and no timing signal is sen
--FSMr3 the
the
One of supports port
signal at isthe connected
excessively
the synchronisationthe following
far end
attenuated
sources
cause in
node
for the is switched
theconfigured
reset:
off
priority list is unavailable.
The
-This
This thefirst
portand
can atisthe
be second connected
primary synchronization
far end nodesourcesisclock from
switched the
off configured priority list are unavailable. On failure, the LTE switches auto
alarm raised if theorBTS the secondary
cannot update thesource.
Certificate Revocation_x000D_
"trs
List
Probable
A power-on
(CRL).cause:
loopback reset":
Please The
is requested refer Cold for start
PDDB
transmission parameter
an Ethernet links selectedCERTH::CRLInfo:
interface for clock
either CRLUpdateFailureReason_x000D_
source
locally are BTS
at the faulty.orThe
the reason
Link OAM canclient
be alarms
of theon theisinterfaces
BTS (for exa
set into loopback
In
"trsthe
for alarm:
watchdog
failure reasons. reset": System overload
Protocol
On
"trs an can failure":
interface
software be for PDH, which Timing
Software over
the Link failure Packet
OAM (ToP) and Synchronuous
functionality was switched on, ethernet.
no Link OAM PDUs were received during the period spe
"trs management reset": Reset triggered by management interface
A Link OAM PDU containing a critical link event flag was received on the Ethernet interface. The alarm is raised with the first de
Unit
"trs Number reset":
spurious is optional: Reset
A
-For malfunctioning
PDH and of the
Synchronous SFPreasontransceiver
Ethernet,
detection
Unitwas failed
detected.
number is 0 or 1.
The
The following
SFP has critical
reported linka events
transmission are possible:
fault condition and has disabled the laser
-It
Excessive
-2.Criticalis not present
The "$time" bit error
Event:format for Timing
rate.
either is The
anGMT. Over
Errored Packet(TOP).
measured
E.g.Symbol bit
2013-03-07 error
Period rate
00:51:26
Event, exceeds
GMT
an the threshold
Errored Frame Event valuetransmitter.
of BER-3
an Errored(10E-3).
Frame Period Event or an Errored
- Dying
Loss of Gasp:
multiframe. eitherThe the interface
local or the remote peer
referenced in the has a fatal
alarm texterror
has and lost is
theabout to restart.
multiframe alignment.
The
Probable
-Alarm Linkinterface
Fault:causes:
thevaluelocal ispeer
optional:has detected a physical link fault by in receiving direction, e.g.device
a LOS.
-Probable
the indication
For signal
PDH the
level valuesignal
is toorangeis received.
low depends
(optical This
on not signal
the is generated
hardware unitare
type: an
1..16intermediate PDH in theare
forward direction because it d
cause: the interface type connectors
has been or cables
configured dirty,
to meet electrical
the framingconnectors or cables
of the interface at thecorroded)
far end. For E1 interfaces
- the
RemoteFor specified
Synchonuous
defectmaximum Ethernet
indication. It isthe
length sentofvalue
the range
by cable
the is=exceeded
1..3
intermediate or the far end equipment because it detects a serious fault in the receive
All It other
not transmission
ismissing.present is for alarmsover related to this signal are suppressed.
-Unit the connector The slotTiming
not properly
has been Packet.
connected
configured toto theholdunit a unit but the plug-in
-unittheisreceiver
Probable not cause: or the
physically Thefar farend
present endtransmitter
has
in the a slot.
LOS, has LOFfailedor AIS alarm on its receiving interface.
Probable
The alarmcause:is triggered Therewhenever
is a transmission a service problem
OAM error somewhere
related to in the
the transmission
intermediate network and AIS is sent instead of user traffic.
of Continuity
When a MEP Check
receives Messages
a valid (CCM) persists
ETH-AIS frame on aAIS
and given
is Ethernetitinterface
enabled, shall trigger an AIS alarm containing the following informati
Probable
as soon ascauses:
one interface
of the error condtions below occurs.
Five -receiving
consecutive failed
The following
-MD levelbeen alarms arelogin attempts to the FTM have been performed.
defined:
-A the unit
1)requested has
MDL_MISMATCH, certificate configured
priority
could not 5 but benot
(highest detected
priority):
retrieved from CCM the is receivedauthority
certificate with MDL (CA).
-A the -Source
unit is MAC address
broken and therefore not detected
lower than
requested the highest
certificate configured
could not be one in
renewed the BTS
from and
the not matching
certificate any
authority
The alarm is raised if the alarm is enabled, the BFD state for the session is not AdminDown and nevertheless no BFD packet is of (CA).
the configured
NOTE: In FSMr2, ones. purethe number interface areappropriate
used (eg. 1,2,3). But for FSMr3 unit types, interface is provided as: from
"module type n
NOTE:
The
Ex:
A alarm
CCM
requestedunit isvariable
fault level -ifshould
raised
certificate prio
could benot
alarm
5 cause replaced
isbe enabled, by
MDL_MISMATCH
retrieved the asBFD the state HW
number ofnames
the configured
session
of certificates (unitTypeConfigured)
is received
not AdminDown and the
from repository during
BFD
server runtime
packet
(RA) reporting.
the far
or certificate end
au
2)
ThisMAID_MISMATCH
alarm indicates that priority
there5:isCCM is received
a mismatch between with MDL BTS which is configured
configuration and auto-negotiation result.
in the BTS, but with MAID not matching any MA configured
The RTT threshold alarm is sent in case the average value of the RTT exceeds the configured threshold. in the BTS on
this MDL.
The
Ex:CCM PLR faultthresholdlevel 5alarm prio 5shall cause be MAID_MISMATCH
sent in case the configured value of PLR is exceeded.
3) MAID_MISMATCH
BTS shall report this alarm priority 5:CCM
if the NTPisserver received is not with matchingorMDL
accessible if theandNTP MAID,
server cannot be used.
but theFiltering
Note: VLAN membershiptime is related of only
the received
to startupframe does notthe
and starting match
alarmthe notVLAN configuration
for clearing of the addressed MA.
the alarm.
Ex:CCM fault level 5 prio 5 cause MAID_MISMATCH
4) ERR_CCM, priority 4:CCM is received with known MDL and MAID, but MEPID
is not configured in the Remote MEP list of the MA.
Ex: CCM fault level 5 prio 4 cause REMOTEMEP_NOT_CONFIGURED
5) ERR_CCM, priority 4: CCM is received with known MDL, MAID and MEPID,but CCM interval coded in the received CCM doe
The BTS shall raise a "Vendor BTS certificate due to expire" alarm when the Vendor BTS certificate is about to expire._x000D_
_x000D_
NE stores trust anchors for its own trust chain and for peers. When own or any trust anchors are about to expire/expired this al
The period of notificaton in advance is configurable and the same as for CA certificate expiary described in WBTS_SEC_46333
FTM
_x000D_ Fault, for which fault name is mentioned in the Fault name -field, is toggling
in
1
Inday the
caseFTM.
...the
4999 Toggling
days with
incoming fault
SSM condition
default is informed
is not 1825 to user time
days._x000D_
received for a certain with this new
period (configured via "ssmTimeout" parameter) this an alarm is rais
FTM Fault. Toggling faults are supressed until the toggling alarm condition
This
is alarm Severity
cleared. is raised of
whenthis the
FTMreceived
Fault is SSM indicates
the same than lower clock quality
the severity of (e.g. "do not use" or "EEC") than required.
the toggling
The reference FTM Fault.
clock monitoring has detected a loss of ToP reference clock signal received from the master clock behind $IP.
-During
The eNB the does
BTS IP notaddress
receiveconfiguration
a reply from ToP Master
the BTS within
tests a certain
the direct time (5
attached sec) upon
network it hasother,
whether sent a sync request
already message
configured BTSs, on
-warning
The eNB receives
shall containfrom
the ToP Master
corresponding a granted
IP message
address. For rates
each (sync
DAD message
event a rate,
separate delay message
reporting shall rate),
be that does not match
indicated._x000D_
SW does not support the detected HW unit type.
BTS has entered IPsec emergency bypass active state.
Probable
BTS causes: IPsec emergency bypass active state where configured IPsec policies are ignored and all traffic is sent unprot
has entered
The base station is currently capturing IP traffic towards a local port or into a file on the base station.
if-#N/A
the traffic
The system capturing
module'sisSW happening
version towards
is too olda local port, port and destination mac address needs to be provided.
Port values can be LMP or < HW
- Supported HW variant not present in system MODULE NAME >-<PORT ID>.
module
i.e LMP or FSM-EIF1, FSM-EIF2 or FTIF-EIF1
State State in issue 01 State in release RL60 Unit Status
Start / Cancel Start / Cancel Start / Cancel Working
Start Start Start Out of order
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Out of order
Start Start Start / Cancel Out of order
Start Start Start Out of order
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Degraded,Working
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Out of order
Start Start Start Out of order
Transient Transient Working
Start Start Start Degraded,Out of order
Start Start Start Out of order
Start Start Start Out of order
Start Start Start Degraded
Start Start Start Degraded
Start Start Start Degraded
Start Start Start Degraded
Start Start Start Degraded
Start Start Start Out of order
Start Start Start Out of order
Start Start Start Out of order
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Working
Start Start Start Out of order,Working
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Out of order
Start Start Start Out of order
Start / Cancel Start / Cancel Start Out of order
Start / Cancel Start / Cancel Degraded,Out of order,Working
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Degraded,Out of order
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Degraded
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Degraded
Start Start Start Out of order
Start Start Start / Cancel Degraded,Out of order
Start / Cancel Start / Cancel Start / Cancel Degraded,Out of order,Working
Start / Cancel Start / Cancel Start / Cancel Degraded,Working
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Out of order
Start Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Degraded
Start / Cancel Start / Cancel Start / Cancel Degraded
Start / Cancel Start / Cancel Start / Cancel Degraded
Start / Cancel Start / Cancel Start / Cancel Degraded
Start / Cancel Start / Cancel Start / Cancel Degraded
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Degraded
Start Start Start Out of order
Start / Cancel Start Start Out of order
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Degraded
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Degraded
Start / Cancel Start / Cancel Start / Cancel Degraded
Start / Cancel Start / Cancel Start / Cancel Degraded
Start / Cancel Start / Cancel Start / Cancel Degraded
Start Start Start Degraded
Start Start Start Degraded
Start / Cancel Start / Cancel Degraded,Out of order,Working
Start / Cancel Start / Cancel Start / Cancel Degraded,Working
Start Start Start Out of order
Start Start Start Out of order
Start Start Start Degraded
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Degraded
Start / Cancel Start / Cancel Start / Cancel Degraded,Out of order
Start / Cancel Start / Cancel Start / Cancel Degraded
Start Start Start Out of order
Start Start Start Degraded,Out of order
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Degraded
Start / Cancel Start / Cancel Start / Cancel Degraded
Start / Cancel Start / Cancel Start / Cancel Out of order,Working
Start Start Start Degraded,Out of order
Start / Cancel Start / Cancel Start / Cancel Degraded
Start Start Start Out of order
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Degraded
Start Start Start Degraded
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start Start Working
Start / Cancel Start / Cancel Start / Cancel Degraded
Start / Cancel Start / Cancel Start / Cancel Degraded
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Degraded,Out of order
Start / Cancel Start / Cancel Start / Cancel Degraded
Start Start Start Out of order
Start Start Start Out of order
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Degraded
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel #N/A Degraded
Start / Cancel Start / Cancel Start / Cancel Degraded
Start / Cancel Start / Cancel Start / Cancel Degraded
Start / Cancel Start / Cancel Start / Cancel Working
Start Start Start Out of order
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Degraded
Start Start Start Out of order
Start Start Start Out of order
Start Start Start Degraded
Start Start Start Out of order,Working
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Degraded
Start / Cancel Start / Cancel Start / Cancel Degraded
Start / Cancel Start / Cancel Start / Cancel Degraded
Start / Cancel Start / Cancel Start / Cancel N/A
Start / Cancel Start / Cancel Start / Cancel N/A
Start / Cancel Start / Cancel N/A
Start / Cancel Start / Cancel N/A
Start Start N/A
Start / Cancel Start / Cancel Start / Cancel N/A
Start / Cancel Start / Cancel Start / Cancel Out of order,Working
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Working
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Degraded,Out of order
Start Start Start Out of order
Start / Cancel Start / Cancel Start / Cancel Out of order
Start Start Start Degraded,Out of order
Start / Cancel Start / Cancel Start / Cancel N/A
Start Start Start Working
Start / Cancel Start / Cancel Start / Cancel Out of order,Working
Start Start Start Degraded
Start Start Out of order
Start / Cancel Start / Cancel Start / Cancel Out of order
Start Start Working
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Degraded
Start Start Start Degraded
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Working
Start Start Start Out of order
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Degraded,Out of order
Start / Cancel Start / Cancel Start / Cancel Degraded
Start / Cancel Start / Cancel Start / Cancel Degraded
Start Start Start Degraded,Out of order
Start Start Start Degraded,Out of order
Start Start Start Degraded,Out of order
Start Start Start Out of order
Start / Cancel Start / Cancel Start / Cancel Degraded,Out of order
Start Start Start Working
Start Start Start Out of order
Start / Cancel Start / Cancel Start / Cancel Working
Start Start Start Out of order
Start / Cancel Start / Cancel Start / Cancel Degraded,Out of order,Working
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Degraded
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Out of order,Working
Start / Cancel Start / Cancel Degraded
Start Start #N/A Degraded
Start / Cancel Start / Cancel #N/A Working
Start / Cancel Start / Cancel Start / Cancel Degraded,Out of order
Start / Cancel Start / Cancel #N/A Degraded,Out of order,Working
Transient Transient Transient Working
Start / Cancel Start / Cancel #N/A Degraded
Start / Cancel Start / Cancel Start / Cancel Degraded
Start / Cancel Start / Cancel Start / Cancel Out of order
Start / Cancel Start / Cancel Start / Cancel Degraded
Start / Cancel Start / Cancel Start / Cancel Degraded
Start Start Start Out of order
Start Start Start Out of order
Start Start Start Out of order
Start / Cancel Start / Cancel Start / Cancel Working
Start Start Start Out of order
Transient Transient Transient Working
Start / Cancel Start / Cancel Start / Cancel Degraded
Transient Transient Transient Working
Transient Transient #N/A Working
Transient Transient #N/A Working
Transient Transient #N/A Working
Transient Transient Transient Working
Start Start Start Out of order
Transient Transient Transient Working
Transient Transient #N/A Working
Start / Cancel Start / Cancel #N/A Working
Start / Cancel Start / Cancel Start / Cancel Degraded
Start / Cancel Start / Cancel Start / Cancel Degraded
Start / Cancel Start / Cancel Start / Cancel Degraded,Out of order
Start / Cancel Start / Cancel Start / Cancel Degraded,Out of order
Start / Cancel Start / Cancel Start / Cancel Out of order
Start Start Start Working
Start / Cancel Start / Cancel Start / Cancel Degraded
Start / Cancel Start / Cancel Start / Cancel Degraded
Transient Transient Transient Working
Start / Cancel Start / Cancel Transient Working
Start / Cancel Start / Cancel Start / Cancel Working
Start Start Start Working
Start Start #N/A Out of order
Start Start #N/A Out of order
Start Start #N/A Out of order
Transient Transient Transient Minor
Start Start Start Major
Start / Cancel Start / Cancel Start / Cancel Critical
Start / Cancel Start / Cancel Start / Cancel Critical
Start / Cancel Start / Cancel Start / Cancel Critical
Start / Cancel Start / Cancel Start / Cancel Major
Start / Cancel Start / Cancel Start / Cancel Critical
Start / Cancel Start / Cancel Start / Cancel Major
Start / Cancel Start / Cancel Start / Cancel Minor
Start / Cancel Start / Cancel Start / Cancel Major
Start / Cancel Start / Cancel Start / Cancel Major
Start / Cancel Start / Cancel Start / Cancel Major
Start / Cancel Start / Cancel Start / Cancel Major
Start / Cancel Start / Cancel Start / Cancel Critical
Start / Cancel Start / Cancel Start / Cancel Major
Start / Cancel Start / Cancel Start / Cancel Major
Start / Cancel Start / Cancel Start / Cancel Major
Start / Cancel Start / Cancel Start / Cancel Major
Start / Cancel Start / Cancel Start / Cancel Critical
Start / Cancel Start / Cancel Start / Cancel Major
Start / Cancel Start / Cancel Start / Cancel Major
Transient Transient Transient Warning
Start / Cancel Start / Cancel Start / Cancel Major
Start / Cancel Start / Cancel Start / Cancel Major
Start / Cancel Start / Cancel Start / Cancel Major
Start / Cancel Start / Cancel Start / Cancel Major
Start / Cancel Start / Cancel Start / Cancel Major
Start / Cancel Start / Cancel Start / Cancel Major
Start / Cancel Start / Cancel Start / Cancel Major
Start / Cancel Start / Cancel Start / Cancel Major
Start / Cancel Start / Cancel Start / Cancel Major
Start / Cancel Start / Cancel Start / Cancel
Start / Cancel Start / Cancel Start / Cancel Minor
Start / Cancel Start / Cancel Start / Cancel Minor
Start / Cancel Start / Cancel Start / Cancel Minor
Start / Cancel Start / Cancel Start / Cancel Minor
Start / Cancel Start / Cancel Start / Cancel Critical
Start / Cancel Start / Cancel Start / Cancel Major
Start / Cancel Start / Cancel Start / Cancel Minor
Start / Cancel Start / Cancel #N/A Major
Start / Cancel Out of order
Start Out of order
Transient Working
Start Out of order
Start / Cancel Degraded,Out of order
Start / Cancel Out of order
Start / Cancel Degraded,Working
Start Out of order
Start Out of order
Start / Cancel Out of order
Start / Cancel Degraded
Start / Cancel Out of order
Start Out of order
Start Out of order
Start / Cancel Working
Start / Cancel Out of order
Start / Cancel Degraded
Start / Cancel Degraded
Start / Cancel N/A
Start / Cancel N/A
Start / Cancel N/A
Start N/A
Start N/A
Start / Cancel N/A
Start / Cancel N/A
Start / Cancel N/A
Start / Cancel Out of order
Start / Cancel Out of order
Start Out of order
Start / Cancel Degraded
Start Working
Start / Cancel Out of order
Start Out of order
Start Out of order
Start / Cancel Working
Start / Cancel Working
Start / Cancel Out of order
Start / Cancel Out of order
Unit Status in issue 01 Unit Status in release RL60
Working Working
Out of order Out of order
Working Working
Out of order Out of order
Out of order Out of order
Out of order Out of order
Out of order Out of order,Working
Working Out of order,Working
Working Working
Working
Working Working
Degraded,Working
Out of order Out of order
Out of order Out of order
Out of order Working
Working
Degraded,Out of order Out of order
Out of order Out of order
Out of order Out of order
Degraded Degraded
Degraded Degraded
Degraded Degraded
Degraded Degraded
Degraded Degraded
Out of order Out of order
Out of order Out of order
Out of order Out of order
Working Working
Working Working
Working Working
Working Working
Working Working
Working Working
Working Working
Working Working
Working Working
Working Working
Working Working
Working Working
Working Working
Working Working
Working Working
Working Working
Working Working
Working Working
Working Working
Working Working
Working Working
Working Working
Working Working
Working Working
Working Working
Working Working
Out of order,Working Out of order,Working
Out of order Out of order
Out of order Out of order
Out of order Out of order
Out of order Out of order
Degraded,Out of order,Working
Out of order Out of order
Degraded,Out of order Degraded
Out of order Out of order
Degraded Degraded
Out of order Out of order
Degraded Out of order
Out of order Out of order
Degraded,Out of order Degraded
Degraded,Out of order,Working Out of order
Degraded,Working Degraded
Out of order Out of order
Out of order
Out of order
Degraded Degraded
Degraded Degraded
Degraded Degraded
Degraded Degraded
Degraded Degraded
Degraded Degraded
Degraded
Out of order Out of order
Out of order Out of order
Working Working
Out of order Out of order
Degraded
Out of order Degraded,Out of order
Degraded Degraded
Degraded Degraded
Degraded Degraded
Degraded Degraded
Degraded Degraded
Degraded Degraded
Degraded,Out of order,Working
Degraded,Working Degraded,Working
Out of order Out of order
Out of order Out of order
Degraded Degraded
Out of order Out of order
Out of order Out of order
Out of order Out of order
Degraded Degraded
Degraded,Out of order Out of order
Degraded Degraded
Out of order Out of order
Degraded,Out of order Out of order
Out of order Out of order
Out of order Out of order
Degraded Degraded
Degraded Degraded
Out of order,Working Out of order,Working
Degraded,Out of order Degraded
Degraded Degraded
Out of order Out of order
Out of order Out of order
Degraded Degraded
Degraded Degraded
Out of order Out of order
Working Working
Degraded Degraded,Out of order
Degraded Degraded
Working Working
Working Working
Out of order Out of order
Degraded,Out of order Degraded,Out of order
Degraded Degraded
Out of order Out of order
Out of order Out of order
Working Working
Out of order Out of order
Out of order Out of order
Out of order Out of order
Degraded Degraded
Out of order Out of order
Degraded #N/A
Degraded Degraded
Degraded Degraded
Working Working
Out of order Out of order
Out of order Out of order
Out of order Out of order
Degraded Degraded
Out of order Out of order
Out of order Out of order
Degraded Degraded
Out of order,Working Out of order,Working
Out of order Out of order
Out of order Degraded,Out of order
Degraded Degraded
Degraded Degraded
Degraded Degraded
N/A N/A
N/A N/A
N/A
N/A
N/A
N/A N/A
Out of order,Working Out of order,Working
Out of order Out of order
Working Working
Out of order Out of order
Degraded,Out of order Working
Out of order Out of order
Out of order Out of order
Degraded,Out of order Out of order
N/A N/A
Working Working
Out of order,Working Out of order,Working
Degraded Degraded
Out of order
Out of order Out of order
Working
Out of order Out of order
Degraded Degraded
Degraded Degraded
Out of order Out of order
Out of order Out of order
Working Working
Out of order Out of order
Out of order Out of order
Degraded,Out of order Degraded,Out of order
Degraded Degraded
Degraded Degraded
Degraded,Out of order Out of order
Degraded,Out of order Out of order
Degraded,Out of order Out of order
Out of order,Working Out of order
Degraded,Out of order Out of order
Working Working
Out of order Out of order
Working Working
Out of order Out of order
Degraded,Out of order,Working Working
Out of order Working
Out of order Working
Out of order Working
Out of order Working
Degraded Out of order,Working
Out of order Out of order
Out of order,Working Out of order,Working
Degraded
Degraded #N/A
Working #N/A
Degraded,Out of order Degraded,Out of order
Degraded,Out of order,Working #N/A
Working Working
Degraded #N/A
Degraded Degraded
Out of order Degraded,Out of order
Degraded Degraded
Degraded Degraded
Out of order Out of order
Out of order Out of order
Out of order Out of order
Working Working
Out of order Out of order
Working Working
Degraded Working
Working Working
Working #N/A
Working #N/A
Working #N/A
Working Working
Out of order Out of order
Working Working
Working #N/A
Working #N/A
Degraded Degraded
Degraded Degraded
Degraded,Out of order Degraded,Out of order
Degraded,Out of order Degraded,Out of order
Out of order Out of order
Working Working
Degraded Degraded
Degraded Degraded
Working Working
Working Working
Working Working
Working Working
Out of order #N/A
Out of order #N/A
Out of order #N/A
Minor Minor
Major Major
Critical Critical
Critical Critical
Critical Critical
Major Major
Critical Critical
Major Major
Minor Minor
Major Major
Major Major
Major Major
Major Major
Critical Critical
Major Major
Major Major
Major Major
Major Major
Critical Critical
Major Major
Major Major
Warning Warning
Major Major
Major Major
Major Major
Major Major
Major Major
Major Major
Major Major
Major Major
Major Major
Minor Minor
Minor Minor
Minor Minor
Minor Minor
Critical Critical
Major Major
Minor Minor
Major #N/A
Unit Status Attributes
Degraded - Validated temperature of any PA sensor is greater than or equal to Tdanger (when any TX/RX resources are availab
alarming FRM)_x000D_
_x000D_
Out of order - dangerously high temperature occurs longer than tT+danger and PA is turned off (when no RX/TX resources are
on alarming FRM)
Flexi BTS FDD, Flexi BTS TDD:_x000D_
Working - if raised for SSD firmware update._x000D_
Out of order - in any other case._x000D_
_x000D_
Flexi Zone Micro FDD, Flexi Zone Micro TDD:_x000D_
Out of order
Not all fans failed: alarming fan = out of order, fan group = degraded_x000D_
All fans failed: all fans and fan group = out of order
Alarming fan = degraded, fan group = degraded
The card may be used (e.g. radio may be connected to port 1 and provide services for some cells) and this is why it is "Degrade
Degraded - Validated temperature of any PA sensor is greater than or equal to Tdanger (when any TX/RX resources are availab
alarming FRM)_x000D_
_x000D_
Out of order - dangerously high temperature occurs longer than tT+danger and PA is turned off (when no RX/TX resources are
on alarming FRM)
Flexi BTS FDD, Flexi BTS TDD:_x000D_
Working - if raised for SSD firmware update._x000D_
Out of order - in any other case._x000D_
_x000D_
Flexi Zone Micro FDD, Flexi Zone Micro TDD:_x000D_
Out of order
Not all fans failed: alarming fan = out of order, fan group = degraded_x000D_
All fans failed: all fans and fan group = out of order
Alarming fan = degraded, fan group = degraded
The card may be used (e.g. radio may be connected to port 1 and provide services for some cells) and this is why it is "Degrade
Degraded (MinorTMAFault)
Degraded - Validated temperature of any PA sensor is greater than or equal to Tdanger (when any TX/RX
resources are available on alarming FRM)
Out of order - dangerously high temperature occurs longer than tT+danger and PA is turned off (when no RX/TX
resources are available on alarming FRM)
#N/A
Working - if raised for SSD firmware update.
Working (FSM)
Out of Order (LCR)
Out of order: when the problems prevents BTS to reach operational state (wrong or missing RNW data/active
commissioning data not readable).
Working: if there have been problems with commissioning data in SW package but still BTS is operational.
Not all fans failed: alarming fan = out of order, fan group = degraded
All fans failed: all fans and fan group = out of order
Alarming fan = degraded, fan group = degraded
#N/A
#N/A
Status "degraded" is used for failure of LTE505 re-configuration during eNB runtime._x000D_
Status
#N/A "out of order" is used for failure of LTE505 configuration at eNB startup.
#N/A
Unit status is "Degraded" if the fault is on an S1 interface with at least one other S1 interface available for use.
_x000D_
Unit status is "Out of Order" when all S1 interfaces are faulty.
#N/A
#N/A
#N/A
#N/A
#N/A
Unit status is Degraded if at least one other S1 interface is operational, or else the Unit status is Out of order.
Unit status is Degraded if at least one other S1 interface is operational, or else the Unit status is Out of order
#N/A
#N/A
#N/A
Severity of this FTM Fault is the same than the severity of
the toggling FTM Fault.
#N/A
Effect
The operation of the BTS possibly decreases.
Flexi BTS FDD, Flexi BTS TDD:_x000D_
If thefault
This FSPdoesupdate notfails, the BTS affect
immediately capacitythe drops.
operationsIf theofoptical
the BTS,interface
but it FPGA SW update
is a notification thatfails,
the communication
BTS master clock to radio modules
frequency dev
_x000D_
The BTS master clock tuning continues regardless of the alarm, but because the BTS master clock adjustment is quite slow to
The module
Flexi Zone Micro in question
FDD, Flexiis outZone
of use. This
Micro fault cancels all the active faults for the same module.
TDD:_x000D_
The BTSare
All cells is not
not operational._x000D_
operational.
The BTS capacity possibly decreases. Some cells might become disabled._x000D_
The BTS is provided
Resources out of order. by the module cannot be used, which means that some features might not work._x000D_
_x000D_
Resources provided by the module cannot be used, which means that some features might not work._x000D_
If the fault is reported for FR module, BTSOM does not know the real FR module state, and thus BTS SM keeps FR LED displa
_x000D_
Real time isthe
Therefore, notRF available.
LEDforand Alarms,SM logs, and all reports have incorrect time._x000D_
If the fault is
_x000D_ reported FRBTSmodule, LED display
the BTSOM status
does notcannot
knowbe aligned.
the FR module's real state, and thus the BTS SM keeps the F
The BTS continues
situation. Therefore,its operation
there with the old
is no possibility file. the RF LED and BTS SM LED display status.
When btsSyncMode is PhaseSync and thetoalarm
align occurs during startup, the BTS will not go onAir as long as the alarm is active
The
_x000D_BTS continues its operation with the old software.
When
If the SW btsSyncMode
download to is any
Phase HWSync, the failed,
unit has alarm is thecanceled during startup,
eNB continues operating and thethe
with alarm is present
currently for more
running than five minutes, th
SW version._x000D_
_x000D_
The BTS does not send faults related to the blocked module to the network management system (NMS). The fault sending to B
If the SW activation has failed on FCM/FCT in the master FSM, the eNB continues operating with the currently running SW vers
_x000D_
The
_x000D_BTS does not send any faults related to the blocked cell or the modules commissioned to the blocked cell to the network m
It is not possible to establish phone calls through the blocked module. In the case of dual mode configuration, that is, the radio
_x000D_
If
The
BTStheBTS SW does
OAM activation
system not is has
send failed on another
any other
needed. HW unit
faults other than(for example,
transport RFtounit),
faults then:_x000D_
the network management system (NMS) when the BTS is
Calls
1. The
_x000D_ through
eNB the blocked
restarts and cell are with
operates transferred
the new toSWanother cell.installed._x000D_
version It is not possible to establish new calls through the blocked cell.
Flexi BTS FDD, Flexi BTS TDD:_x000D_
2.
All
The Eventually,
cells if the SM
are disabled.
operator (BTS eNBand is integrated
OMS/NetAct) to theis NetAct,
informedafter thethe
about automatic recovery SW update,
autonomously-triggered the eNB
recovery restarts and operates wit
reset._x000D_
Flexi
_x000D_ BTS FDD, Flexi BTS TDD:_x000D_
_x000D_
FCM/FCT or FTM is fault source: BTS startup is terminated._x000D_
Flexi
Flexi Zone
BTS
Zone Micro
FDD,
Micro FDD,
Flexi
FDD, BTSFlexi
Flexi Zone
ZoneisMicro
TDD:_x000D_
Micro TDD:_x000D_
TDD:_x000D_
FSP
The or
SW DSP is fault source: FSP not taken into use._x000D_
The BTSupdate
Depending
Depending
_x000D_ is on theto reported
operational.
on the this BTS severity,
reported might notthe
severity, beBTS
the possible
BTS capacity
capacitywithout special
might
might have actions.
have decreased
decreased The(BASE
BTS continues
(BASE STATIONits
STATION operation with
OPERATION
OPERATION the old software
DEGRADED,
DEGRADED, CEL
CEL
_x000D_
For resources that are not in use (not commissioned) lack of support_x000D_
Flexi
The BTS
Flexi Zone Micro
Zonememory
Micro FDD, Flexi
operations,
FDD, Zone Micro
for example
Flexi Zone Micro TDD:_x000D_
the software download and parameter updates, are not stable._x000D_
TDD:_x000D_
is
BTS reported
service byisminor
degradedseverity alarm
or out (BASE STATION NOTIFICATION).
_x000D_
BTS BTS
The is notmemory
operational.operations, forofexample
service. the software download and parameter updates, are not stable._x000D_
The
_x000D_ISTI (In Service Time Indicator) value for HW Repair Center might not be correct or readable.
The BTS memory operations, for example the software download and parameter updates, are not stable._x000D_
The
_x000D_ISTI (In Service Time Indicator) value for HW Repair Center might not be correct or readable.
The BTS memory operations, for example the software download and parameter updates, are not stable._x000D_
The
_x000D_ISTI (In Service Time Indicator) value for HW Repair Center might not be correct or readable.
The BTS memory operations, for example the software download and parameter updates, are not stable._x000D_
The
_x000D_ISTI (In Service Time Indicator) value for HW Repair Center might not be correct or readable.
The BTS capacity decreases. The digital signal processing (DSP) does not work correctly.
The ISTI (In Service Time Indicator) value for HW Repair Center might not be correct or readable.
The BTS capacity decreases or the BTS is not operational. The Digital Signal Processing (DSP) does not work correctly.
Flexi BTS FDD, Flexi BTS TDD:_x000D_
The
There BTS is not
is no actual operational
effect to BTSor thefunctionality.
capacity is degraded._x000D_
This is user-specific.
_x000D_
There is no actual effect to BTS functionality.
Flexi Zone Micro FDD, Flexi Zone Micro TDD:_x000D_ This is user-specific.
The
There BTS is not
is no actual operational.
effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
The BTS is not operational.
Some action inside the BTS is interrupted. The BTS does not operate normally. The fault is in the unit reported in the fault sourc
Flexi BTS FDD, Flexi BTS TDD:_x000D_
The
This BTS
fault capacity
preventspossibly
the BTSdecreases.
from functioning. The cell with incorrect
Depending configuration
on <x>, some processing is not working._x000D_
resources, some cells, or the whole BTS are
_x000D_
This fault can prevent the BTS from
Flexi Zone Micro FDD, Flexi Zone Micro TDD: _x000D_ functioning when the RF Module is needed for the required cell configuration.
The BTS
Flexi BTScapacity
FDD, Flexi possibly decreases.
BTS TDD:_x000D_
_x000D_
The system clock frequency starts drifting and the air interface frequency accuracy starts to degrade. The BTS might work prop
FDD:_x000D_
Flexi BTS
If other FDD, Flexi
references areBTS TDD:_x000D_
available, the synchronization reference source changes to another source. Tuning then follows this new
The
If
The BTS
other
BTS can
is notoperate
references areproperly for months
not available,
operational. the BTS or even
master a year
clockwhen being
(OCXO) in theis5%
tuning margin
halted andarea, but eventually
the BTS the DAC
synchronization dropsvalue reac
to holdo
synchronization
_x000D_ setting defined in the BTS commissioning._x000D_
The BTS is not commissioned or integrated to the network. The BTS cannot be accessed or configured remotely._x000D_
_x000D_
TDD:_x000D_
_x000D_
Effects
The BTS
If other in FDD Frequency
cannot
references goare
to the Synchronization
operational
available, state.mode:_x000D_
the synchronization reference source changes to another source. Tuning then follows this new
Assuming
The MHA is degraded and the RX signal has
If no other that
valid the BTS
reference reference
available, signal
BTS correct
tuning
level mode
might accuracy
bemoves whennormal
from
decreased. the DAC
The size value
to of
holdover.reaches
the cell the
be adjustment
If holdover
might limit 0because
is not possible
reduced. or 4095 (mea
of ins
not met any more. Even in that stage the BTS might still be operational but the system performance might drop, affecting, for ex
_x000D_
The MHA is faulty and the RX performance might be degraded. The size of the cell might be reduced.
_x000D_
Flexi Zone Micro FDD, Flexi Zone Micro TDD:_x000D_
Effects
The
Tuning in FDD
antenna
does not Phase
line is notSynchronization
follow operating
the external mode:_x000D_
correctly. The cell capacity might be decreased.
reference._x000D_
When
ClockBTS
Flexi the
tuningDAC
FDD, value
is halted reaches
and the
Flexi BTS the adjustment
BTS continues its
TDD:_x000D_ limit 0 or 4095,
operation the basic
based on theLTE system
internal ovenoperation effects are the same as in Freque
oscillator._x000D_
more._x000D_
The air interface accuracy of 0.05 ppm is kept for at least 24 hours. Within that time, the BTS can work properly but
In
The VSWR
outputThreshold
_x000D_ power at Tuning modeis- there
the antenna decreased is no impact
because toof
the state
the of the of
reflection cell/radio
the signalmodule._x000D_
in the TX path. The antenna is the
not network
working
_x000D_
Flexi
The Zone
RX pathMicro FDD,
operating Flexi Zone
performance
In case of not CPRI/IR radios:_x000D_ Micro
is TDD:_x000D_
decreased.
This
TXs faultgo
that
The signal ispath
an indication
through thatThe
the affected
is unusable. theantenna
system
cells thatclock
line
arearetuning range is unit
disabled._x000D_
using the faulty nearing
might itsnot
limitwork.
after which the system clock frequency can longe
the
As Flexi
asignal Zone
result:_x000D_ Micro BTS must be scheduled for replacement. The amount of time between the reporting of the 1818 fault and
The
cannot be path is unusable.
supported. However,Theif cells
there using
is a the faulty
defect unit might
associated withnot
thework.
system clock, a much shorter period might be available.
- The cell that has lost its only TX or has no Primary TX available is disabled._x000D_
The
- TheBTScellcapacity
that still might
has itsbe decreased.
Primary TX available, but has lost its Secondary TX, is degraded. Such a cell also loses its MIMO/VA
- theBTS
The radio modulemight
capacity becomes degraded_x000D_
be decreased.
_x000D_
The BTS capacity might be decreased.
In case of CPRI/IR radios:_x000D_
The
TXs BTS
that gocapacity
through might be decreased.
the affected antenna line are not disabled._x000D_
As
TheaBTSresult:_x000D_
capacity might be decreased.
- radio
The module
antenna lineautonomously
device does not reduces
work RF power.The
properly. _x000D_
cell operation is degraded.
_x000D_
The device is out of use.
_x000D_
Flexi Zone Micro
The module mightFDD,haveFlexi
beenZone
startedMicrowithTDD:_x000D_
an old SW version and is therefore not compatible with other modules.
The
The cell
BTSiscapacity
disabled._x000D_
is lost.
Downlink signal transmission on the given antenna line is disabled and the corresponding FR transmitter is unusable. Thus, the
Heating from the heating element is not available. The module temperature might not reach the working level or might reach it v
The BTS capacity drops. The cell is not operational.
The MHA's gain might be decreased. The cell performance might be decreased as well. The real level of gain provided by MHA
MHA doesn't provide gain in RX path. The cell performance might be decreased. Within recovery action missing gain is compen
Some antenna line device functions might not work properly.
Some antenna line device functions might not work properly.
Some antenna line device functions might not work properly.
Some antenna line device functions might not work properly.
The BTS functionality is degraded and/or resources are unavailable.
The BTS functionality is degraded and/or resources are unavailable.
Flexi BTS FDD, Flexi BTS TDD:_x000D_
_x000D_
If other references are available, the synchronization reference source changes to another source. Tuning then follows this new
FDD:_x000D_
_x000D_
Calls
If are not possible through thethe affected cell(s).
If other
other references
references are are available,
not available, synchronization
the BTS master clock reference
(OCXO)source changes
tuning to another
is halted and thesource, the tuning follows
BTS synchronization thistonew
drops r
holdo
_x000D_
Calls are not possible through the affected cell(s).
If
Theother
RF references are not available,
Module is configured tuning does
using defaults and the not performance
follow the external
is not asreference any more. Clock tuning is halted and the BTS
expected.
_x000D_
Calls
If the are
FCMnot possible
[FSMr3: through
FCT] the affected
is approaching thecell(s)
end of (7653 CELL but
its lifetime FAULTY)._x000D_
the reference frequency is still correct, the BTS and system p
_x000D_
_x000D_
Calls are not possible through the affected cell(s) (7653 CELL FAULTY)._x000D_
There might be problems in the calls through the affected cell(s) (7654 CELL OPERATION DEGRADED).
TDD:_x000D_
_x000D_
Calls are not possible through the affected cell(s) (7653 CELL FAULTY)._x000D_
If othermight
There
_x000D_ references are available,
be problems the synchronization
in the calls through the affected reference
cell(s)source
(7654 changes to another DEGRADED)._x000D_
CELL OPERATION source. Tuning then follows this new
There
_x000D_ can be problems in the phone calls through the affected cell(s) or calls can be impossible.
There can be problems in calls through the affected cell(s) (7654 CELL OPERATION DEGRADED)._x000D_
If
No noimpact
Flexi
_x000D_other valid
on
BTS FDD, reference
system (7652
Flexi BTS available,
BASE STATION
TDD:_x000D_ BTS tuning mode moves from normal to holdover. If holdover is not possible because of ins
NOTIFICATION).
_x000D_
Calls
No are
impact not
on possible
system through
(7652 the
BASE affected
STATION cell(s)._x000D_
NOTIFICATION)
There might be problems in the calls through the affected cell(s).
Flexi Zone Micro FDD, Flexi Zone Micro TDD:_x000D_
_x000D_
Calls
The BTS
Flexi are not
Zone possible
supports
Micro through
an integrated
FDD, Flexi Zone theGPS affected
Micro cell(s).
receiver. If there is a prolonged loss of the GPS 1PPS clock there is likely a hardware fail
TDD:_x000D_
The Flexi
Calls Zone
are not Micro BTS
possible through RX theis disabled
affectedand the (7653
cell(s) cell is CELL
unusable, the BTS is rebooted (7653 CELL FAULTY)._x000D_
FAULTY)._x000D_
The Flexi
_x000D_ Zone Micro BTS RX is disabled, calls are
The TX/RX paths of the RF module are out of order and phone calls throughpossible using the remaining RX, but cell
the affected capacity
cell(s) are notand performance might d
possible.
The problems might occur in the calls through the affected cell(s) (7654 CELL OPERATION DEGRADED).
Flexi BTS FDD, Flexi BTS TDD:_x000D_
The
There TXcan
partbeisproblems
out of power in the and calls
calls are notthe
through possible
affected through
cell(s).the affected cell(s)._x000D_
_x000D_
There mightMicro
Flexi Zone be problems
FDD, Flexi in the
Zone calls through
Micro the affected cell(s).
TDD:_x000D_
Callsfault
This are not possible
should cancel through the affected cell.
itself. _x000D_
Heating of the module is ongoing._x000D_
The RF Module configuration might fail and cause another fault, and there can be problems in the calls through the affected cel
During RF startup affected cell resources are not reported to RROM.
The default configuration is used and the cell TX and/or RX performance is degraded. There can be problems in the calls throu
The cell's TX and/or RX performance might be degraded because of the failure or calls are not possible through the affected ce
Flexi BTS FDD, Flexi BTS TDD:_x000D_
The
The TXcommunication
power level is between
decreased the System
and there Module
can beand RF module
problems with might
phonebe corrupted.
calls through Calls are not cell(s).
the affected possible through the affecte
_x000D_
There can be
Flexi Zone problems
Micro FDD, Flexiin callsZonethrough
Microthe affected cell(s).
TDD:_x000D_
The
It communication
is not betweenphone
possible to establish the System Module the
calls through andblocked
RF module might be corrupted. Calls are not possible through the affecte
FR._x000D_
_x000D_
The fault may mean that FAN in radio module is not working. In this case_x000D_
The
radio BTS doesmay not be
send faults that are related to the blocked Flexi Radio module (FR) to the network management system (NM
If the module
fans do not rotate overheated._x000D_
as required, the module's temperature might rise too high.
_x000D_
If
Thethefault
fanscando be
notcanceled
rotate as only required,
for somethe module
types oftemperature
radio modules might
i.e. rise too high.
the_x000D_
radio
If the modules
fans rotate where
fasterfans
than are detected
required, based
they cause on unnecessary
speed response algorithm_x000D_
noise.
(FRM3.x, FRGT from version 102 and FRGS from version X21)_x000D_
The RF module might overheat, but there is no immediate effect on the module's operation.
Calls are not possible through the affected cell(s).
There might be problems with calls made through the affected cell(s).
Calls and data transmissions are possible with degraded quality and lower bandwidth because of increased bit error rate on opt
Calls and data transmissions are not possible through the affected cell(s).
The cell, using the RF module which notified the fault, is disabled._x000D_
_x000D_
The Flexi BTS unit in question is transmitting or receiving data with degraded performance. The fault does not trigger special ac
Downlink signal transmission on the given antenna line is disabled and the corresponding FR transmitter is unusable. Hence, th
The traffic between the System Module and the connected radio module is interrupted. The cell operation is faulty._x000D_
_x000D_
The traffic between the System Module and the connected radio module is interrupted. The cell operation is faulty._x000D_
The traffic between the Baseband Module (for example, FBBC) and the connected radio module is interrupted. The cell operatio
_x000D_
The cell(s) of the RF Module behind the broken connection are not operational and the RF Module cannot be used.
_x000D_
The traffic between the Baseband Module (for example, FBBC) and the connected radio module is interrupted. The cell operatio
If
Thethecell
_x000D_ fault is reported
operation for primaryThe
is degraded. optical interface,
optical connection
interface to radio modulesif further
loses its synchronization in theofchain
the amount is exceeds
errors affected the
by what is indicat
defined limit.
If
RP3thetraffic
fault istoreported for primary
the connected optical is
RF Module interface, connection
malfunctioning. Thetorelated
radio modules
cell(s) arefurther in the chain is affected by what is indicat
not operational.
Baseband bus RP3 traffic to the RF Module is not working. Cell operation is degraded._x000D_
Baseband bus RP3 traffic to the RF Module is not working. Cell operation is degraded._x000D_
Baseband bus RP3 traffic to the RF Module is not working. Cell operation is degraded._x000D_
There is possibly no immediate effect on the BTS operation, but it might cause an optical interface alarm.
The traffic between the System Module and RF Module is unreliable. Some calls or other connections might be lost.
The connection to the associated link is lost. The data is partially or completely lost. The worst-case fault effect can expand furt
_x000D_
Data traffic to the connected RF Module is malfunctioning. BTS operation is faulty._x000D_
This fault can prevent the BTS operation when the RF Module is needed for the required cell configuration._x000D_
RP3 traffic from the baseband is malfunctioning. The System Module or FBBx Module operation is degraded.
_x000D_
fault is visible
The System Moduleonly for the
is out first radio
of order in the
and the BTSchain.
is outFault 10 sends for the other FRs when pooling breaks because of the lost
of order._x000D_
The System Module is out of order and the BTS is out of order._x000D_
Baseband bus RP3/RP3-01 traffic might work incorrectly. The cell operation is degraded.
An SW update is needed.
The BTS operation is degraded because some of the BTS resources are not available.
The BTS operation is degraded because some of the BTS resources are not_x000D_
available.
The BTS operation is degraded because some of the BTS resources are not available.
The BTS operation is degraded because some of the BTS resources are not available.
The BTS operation is degraded because some of the BTS resources are not available.
Depending on the reported alarms, the BTS capacity might have decreased (BASE STATION OPERATION DEGRADED) or the
Depending on the reported severity, the BTS capacity might have decreased (BASE STATION OPERATION DEGRADED), or th
Depending on the reported alarms, the BTS capacity might have decreased (CELL OPERATION DEGRADED or CELL FAULTY
If the fans are not rotating as expected, there is a risk that the module_x000D_
temperature
Depending on orthe
acoustic
reported noise levelsthe
alarms, risefault
toosituation
high. Formight
example,
haveano Temperature_x000D_
impact on the operation (BASE STATION NOTIFICATION),
fault
(BASE might be
STATION generated
FAULTY). from the alarming module.
Flexi BTS FDD, Flexi BTS TDD:_x000D_
_x000D_
Flexi BTS FDD, Flexi BTS TDD:_x000D_
FDD:_x000D_
The BTS capacity or might have
The
1. newreported
If the installed alarm failed HWdecreased._x000D_
is 7652 resources
BASE STATION are notNOTIFICATION,
available beforethe theBTSBTSishasusingbeen
thereset.
lower priority synchronization source as a
_x000D_
2.
Any If the reported
attempt by thealarm is
operator 7651to BASE
configure
Flexi Zone Micro FDD, Flexi Zone Micro TDD:_x000D_ STATION
modes OPERATION
other than DEGRADED,
single TX mode the
for BTS
the has
cell willno
bevalid synchronization sources as a
unsuccessful.
fault situation
Configured lasts
LNCELs
The cells remain down. for a long
greater time,
than the
the accuracy
maximum starts
allowed to drift
are slowly.
ignored. However,
Configured it might
Cells take
that several
exceed weeks
the beforeallowed
maximum the BTS/RAN
numb
_x000D_
The fault has no direct impact on the operation (BASE STATION NOTIFICATION).
TDD:_x000D_
1.
The If the
BTSreported
does notalarmfunctionis 7652 BASESome
correctly. STATION NOTIFICATION,
BB processing resourcesthe BTS
in theisBTS
usingaretheoutlower priority synchronization source as a
of use.
depends on the quality of the used lower
The BTS resources have decreased or the BTS is faulty. level source._x000D_
_x000D_
Flexi
_x000D_ BTS FDD, Flexi BTS TDD:_x000D_
The BTSreported
2. If the
Depending operation
on thealarm is degraded
reported is 7651
alarm, (FSP
BASEthe is faulty,
STATION
fault alarm 7651),not
OPERATION
situation might orDEGRADED,
a cellan
have of impact
the BTStheonis outhas
BTS
the of order (FSP
no valid
operation is faulty, alarm
synchronization
(BASE STATION 7653),
orsources or
asthe
CELL NOTI a
_x000D_
fault
FAULTY).situation lasts for a long time, the accuracy starts to drift slowly. However, it might take several weeks before the BTS/RAN
The
Flexi BTS
ZoneisMicro
not commissioned.
FDD, Flexi Zone Micro TDD:_x000D_
_x000D_
The
Flexi
_x000D_BTS
BTSoperation
FDD, Flexi is BTS
degraded (FSP) or the BTS is not operational (FCM/all FSPs).
TDD:_x000D_
BTS
This startup
If thefault canisprevent
reported interrupted
alarm isthe
7650 andBASE
BTS the
fromBTS is out of
STATION
functioning order._x000D_
FAULTY,
when theradio
the BTS unit
has isbeen in holdover mode and holdover time is run out. BTS is
needed_x000D_
_x000D_
_x000D_
for the required cell configuration.
The
Flexi BTS isMicro
not operational or is degraded.
Flexi Zone
Zone Micro FDD, FDD, Flexi
Flexi Zone
Zone MicroMicro TDD:_x000D_
TDD:_x000D_
The
None BTS
signalcapacity
path is might
unusable. decrease
The or there
cells usingmight be interference
the faulty in calls
unit might not work.(commissioning data)._x000D_
BTS startup is interrupted and the BTS is out of order (RNW data).
This cell-specific fault does not prevent cell configuration. It is for informative purposes only.
The antenna line is not operating correctly. The cell is disabled. _x000D_
The antenna line is not operating correctly. The cell capacity decreases.
The RS485 interface is not operating correctly. Communication with TILT devices is not possible.
BB resources are shut down, the BTS operation will be faulty. _x000D_
FCM
Cells and FTM
are not are kept Itpowered.
activated. relates to cells that were going to use the radio unit connected to the system module via the faulty fibe
Fan control is not optimized. _x000D_
The
The effect
Radio to noise/temperature
Module connected tolevel is marginal.
this OptIF is not started.
The FSP resource is shut down and the BTS operation is degraded or faulty._x000D_
The
If theFCTfansand possibly
do not rotateother FSPs thatthe
as requested, aremodule
not alarming are kept
temperature powered.
might rise too high.
If the fan(s) do not rotate as requested, the module temperature might rise too high.
If the fans rotate faster than requested, unnecessary noise is emitted.
The source unit has an inconsistent SW version.
The source unit has an inconsistent SW version.
The source unit has an inconsistent SW version.
Flexi BTS FDD, Flexi BTS TDD:_x000D_
The
The module cannot:_x000D_
cell is disabled (the downlink carrier that transmits PSS/SSS signals has failed)._x000D_
1.
The savecell to
is file the cause
degraded ofdownlink
(thewill the SW carrier
fallbackthat
on transmits
request_x000D_PSS/SSS signals is working)._x000D_
The ongoing BTS reset
or_x000D_ last longer.
2.
The mount
cell orthe BTS passive
is notfile system and
operational or isthus read the cause of the SW fallback on request from the file._x000D_
degraded.
_x000D_
1.Other than sync hub configuration: the master system module works properly._x000D_
Flexi
2.In Zonehub
sync Micro FDD, Flexi the
configuration: Zone Microradio
shared TDD:_x000D_
module
The
The system module
BTS cannot:_x000D_ is out of order and the BTS is outmight
of order.be lost and the cell that is supported by the radio module might be d
1.
The savefaulttohasfile no
thedirect
causeimpact
of the onSWthe fallback on request_x000D_
operation (BASE STATION NOTIFICATION).
or_x000D_
The fault has no direct impact on the operation (BASE STATION NOTIFICATION).
2. mount the passive file system and thus read the cause of the SW fallback on request from the file.
The fault has no direct impact on the operation (BASE STATION NOTIFICATION).
The fault has no direct impact on the operation (BASE STATION NOTIFICATION).
The fault has no direct impact on the operation (BASE STATION NOTIFICATION).
DC voltage is disabled on reporting Antenna Line.
The HDLC link will be disabled on the reporting Antenna Line or IUANT port.
In case of problem detection in SW activation, the SW activation and consequent reset are aborted._x000D_
In
Whencasethe of eNB
problem detection
is sync in start-up,
hub slave the BTS
and rfsharing is remains
enabled,out of order.
start-up RollbackOtherwise,
is stopped. to the previous SWisand
start-up anotherwithout
continued SW download
the refe
The radio unit that is connected to port 3 or 4 of FBBC card cannot provide services to cell/cells and the cell/cells are degraded
The BTS is operational.
When the fault is detected during startup, the BTS is not operational. When the fault is detected during runtime, the requested n
Flexi BTS FDD:_x000D_
If
Theanother
PHICH synchronization
transmission power sourceis isnot
available,
boostedthe BTS or
enough starts
at alltocompared
use that for tothe
theBTS reference.
operator's Then there are no effects to the
setting.
_x000D_
Cell operation
If there are no is downgraded.
other synchronization sources available, the external GPS/GNSS receiver module continues providing the refere
of
Forthe S1:phase
The eNB drifting,
lost the
the phase deviation
connection is considered
to S-GW. to reach
All calls using thethe threshold
failed GTP-Uvalue and then
data path the features
are released, andrequiring phase
new GTP-U sync
data tun
still within the required limits,
The S1 interface is unavailable. _x000D_ typically over several months._x000D_
_x000D_
_x000D_
The X2 interface is unavailable. Handover of calls to or from cells of the associated adjacent BTS is not possible. Base station (
_x000D_
If no other S1 interface is available for use, BTS operation is considered faulty and no calls can be set up. _x000D_
Flexi
One
_x000D_ BTS
of theTDD:_x000D_
transport paths(SCTP) in SCTP connection to MME has failed. Only applicable when SCTP multi-homing is supporte
If another
If there
BTS synchronization
is atconfigured
is not othersource
least one according toisradio
available,
S1 interface BTS
available
network starts
for
plan file.toBTS
use, useisthat for the
operation is BTS reference.
considered
waiting_x000D_ Then there
degraded areBTS
and the no effects to the BT
can continue op
_x000D_
for the correct radio network configuration file.
The
If therecellareis disabled.
no other synchronization sources available, the external GPS/GNSS receiver module continues providing the refere
because
The cell isofdisabled.
the phase drifting, the phase deviation is considered to reach the threshold value and then the air interface (cells) a
In the case of subscriber trace activation, if the failed trace connection was used for sending the trace reports, the BTS conside
_x000D_
BTS startup is interrupted and the BTS is not operational.
In the case of cell trace and interface trace, if the failed trace connection was used for sending the trace reports, the BTS does
Trace session (for subscriber/cell/interface) cannot be activated/deactivated.
The BTS cannot accept new UEs attempting registration in any of the reported misconfigured PLMNs. Such an attempt by new
_x000D_
The fault has no effect on the base station operation but the LNADJ and/or LNADJL object was not stored in the eNB.
The UEs that might have already registered in misconfigured PLMN(s) remain unimpacted.
The fault has no effect on the base station operation but LNADJW object with newly learnt WCDMA neighbor cell configuration
The fault has no effect on the base station operation but LNRELW object with newly-learnt WCDMA neighbor relation configura
The fault has no effect on the base station operation. The WCDMA neighbor relation, which is reported by a UE because of acti
1)
Nohas not been
handover canstored because to
be performed the actual
cells withnumber of LNRELW
the affected PCI andper cell (LNCEL) per UTRAN carrier (in ANRPRW profile) is equ
frequency.
2) has been stored but at least one of LNRELW's mobility paremeters (psHoAllowed, srvccAllowed) has been set to 'forbidden'
The cell that cannot be recovered remains unavailable.
If an X2 link is available, no type of handover to the neighbor cell is possible at all._x000D_
If
Thethehandover
UE-basedfailure
ANR rate
is activated, there will
for the affected bemight
cell continuous retries to resolve the ECGI.
be increased.
All eICIC partnerships are terminated.
Handovers from or to cells of the related adjacent BTS are not possible.
Handovers to cells of the related adjacent BTS are not possible.
The S1 interface is not available for call setup and existing calls are released.
The S1 interface is unavailable and the BTS is not available for call setup.
The cell is deactivated (switched off) until S1 availability is regained.
If the update of the TAC or PLMN identities was not successful, the eNB performs S1 setup which means service loss for affect
System Information for the related GERAN neighbor cells is not reliable and will not be provided to UEs, which are released wit
System Information for the related GERAN neighbor cells is not reliable and will not be provided to UEs, which are released wit
Some of the UEs with a complete set of system information of the cell stored that has left the cell and has come back within thre
This fault has no effect on BTS operation.
There is high memory usage, which might result in memory outage.
Flexi BTS FDD, Flexi BTS TDD:_x000D_
Critical
The BTS impact on FSP
capacity operation._x000D_
decreases or the BTS is not operational. The Digital Signal_x000D_
_x000D_
Processing (DSP) does not work correctly.
The
FlexiBTS Zonecapacity
Micro FDD, decreases
Flexi Zone or the BTS TDD:_x000D_
Micro is not operational. The Digital Signal_x000D_
Processing
Critical
The BTS impact (DSP)
on the
capacity does not
operation.
decreases work correctly.
or the BTS is not operational. The Digital Signal_x000D_
Processing (DSP)
The fault has no further consequences. does not work correctly.
The BTS does not take the new settings into use before a reset.
The communication link between the BTS and the BFD peer is defective. No communication is possible.
Possible impact on the connections over this interface:
-Possible no calls impact
are possible
on the connections over this interface:
-- loss no of remote
calls management
are possible anymore access to other network elements in the RAN
Possible
-- loss of effects:_x000D_
synchronization if the interface
-Flexi loss of remote
no calls are management access
possible._x000D_ to isother
usednetwork
as synchronization source.
elements in the RAN
-- loss BTS
of FDD, Flexi
synchronization BTS if TDD:
the interface is used as a synchronization source
The lossinterface
of remote management
cannot access to other network elements in the RAN_x000D_
Possible impact:
- loss of synchronization The be BTS used
if is
for
thenot
transmission.
synchronized
interface is usedtoasthe network anymore.
a synchronization source._x000D_
-Flexi
The BTS IKE SAs
Zonemay and
MicroIPSec
haveFDD, SAs
to use
Flexi cannot
a Zone be established
synchronization or re-keyed
Micro TDD:interface that has a lower clock
quality:
The Certificate if the primary
interface cannot
Revocationclock
be used source
Listfor hasnotbeen
transmission.
could lost, the BTSNewswitches
Conditionally,
be updated. Bluetooth
revoked is enabled when the backhaul goes down.
certificates_x000D_
automatically
The
remain SFP unknown to
module's the
to secondary
laser
the is
BTS. not clock
switchedsource.
on orIf
noboth
SFP the primary
module anddetected
was the at all.
Normal
secondary traffic is interrupted.
clock areOnlylost, loopback OAM frames are transmitted
clock.and received over the interface. If the test frame gener
The Ethernet Linksources
is down. the BTS switches to the internal
The
An Ethernet EthernetLink interface
cannot might be out of order
be successfully or the remote peer might be out of order. Traffic might get lost.
established.
No Ethernet data or clock information
The Ethernet interface is defected or the remote peer is exchanged viaisthis interface.
defective. Traffic might get lost.
The SFP is not operational.
Possible impact on the connections over this interface:
Possible
- voice calls impact:
or data connections cannot be established.
--Possibleslow management
impact: the access
remote management to the management
connectivity
performance WBTS
cannotand be other
datanetwork
established.
collected elements in the RAN
on this interface becomes invalid.
-- poor loss voice
of quality and data
synchronization if theperformance
interface is used as a synchronization source
Possible
-- ifDepending impact
this interface on the
is part connections
of an IMA group, over the interface
this IMA in question:
-Possible areon
no calls impact use
possible of the Ethernet interface, the link
aboveis todescribed
be temporarily
impactsuspended from
can occur for operation
the local BTS and/or other BTS elemen
on the connections over this interface:
-- loss of remote
no calls management access to other network elements in the RAN
are possible
Possible impact:_x000D_
-_x000D_
loss of remote management access to other network elements in the RAN
The
-- losstransport connection towards
of synchronization the remote peer
as amay be defective. source
Traffic may get lost.
no calls are possible forifthe theconnections
interface is used
over this synchronization
unit_x000D_
The transport
_x000D_ connection towards the remote peer may be defective. Traffic may get lost.
-None
loss of remote management access to other network elements in the RAN
The requested service is not available.
The communication link between the BTS and the BTS peer is defective. Or the peer is defective. No communication is possibl
The communication link between the BTS and the BFD peer is defective. No communication is possible.
If the alarm is active, then potentially there is a synchronization loop
None
None
BTS will not have time synchronisation.
Flexi Zone Micro FDD, Flexi Zone Micro TDD:
SyncE is no longer
There might a working
be available synchronization
another synchronizationsource.
source at eNB; in that case the BTS switches automatically to the other clock
_x000D_
If no other synchronization source is available at eNB, it runs in hold-over mode; _x000D_
Possible
_x000D_ impact:_x000D_
_x000D_
Please
Configured referIPsec
to status of 3080:
policies EFaultId_BtsReferenceClockMissing
are ignored and all traffic is sent unprotected.
- No calls are possible for the connections over this unit
None
BTS traffic has switched over from the primary IPsec tunnel to secondary (backup) IPsec tunnel terminating on secondary secu
The capacity drops. Cell(s) might remain down.
BTS baseband processing power is decreased. If all FSPs are faulty, the BTS is not operational.
The BTS is operational.
Flexi BTS FDD, Flexi BTS TDD:_x000D_
The
If theaffected
redundant cellfans
might not becool
cannot fullythe
operational._x000D_
module sufficiently, the unit might overheat. For example, a temperature fault from the FC
_x000D_
If the Zone
Flexi fans are
Micro notFDD,
rotating
FlexiasZone
requested, the module temperature might rise too high.
Micro TDD:_x000D_
The
If thecell
SWisdownload
not operationalto anyand
HWtherefore, the BTS
unit has failed, the is not continues
eNB operational.operating with the currently running SW version._x000D_
_x000D_
The cell or BTS is not operational or is degraded.
If the SW activation has failed on FCM/FCT in the master FSM, the eNB continues operating with the currently running SW vers
The BTS continues to operate with the remaining cells on air or goes to IntegratedToRAN state if there are no more "enabled" c
_x000D_
If the
The BTS SW is activation has failed on another HW unit (for example, RF unit), then:_x000D_
not operational.
1. The eNB restarts
The BTS is not operational and operates
if no any with the new within
regulation SW version installed._x000D_
a days._x000D_
2.
The Eventually,
time if the
(days/weeks) eNB is integrated
howmight
long last to the NetAct,
untildown. after the
not meet the +/- 50ppbautomatic recovery
frequency SW update,
accuracy the eNB
requirement restartson
is depend and
theoperates wit
conditions
The capacity
_x000D_ drops. Cell(s) remain
Flexi
The BTSZonedoesMicro notFDD, Flexi Zone Micro TDD:_x000D_
operate.
The
The BTS does not operate. might not be possible without special actions. The BTS continues its operation with the old software
SW update to this BTS
The BTS resumes the startup but the cells assigned to non-existing LCR IDs are discarded.
Calls through the affected cell(s) are not possible
Baseband bus RP3 traffic to the RF Module is not working. Cell operation is degraded.
Baseband bus RP3 traffic to the RF Module is not working. Cell operation is degraded.
Depending on the reported alarms, the fault situation might have no impact on the operation (BASE STATION or CELL NOTIFIC
FAULTY).
Depending on the reported alarms, the fault situation might have no impact on the operation (BASE STATION NOTIFICATION)
(BASE STATION
Depending on theFAULTY).
reported alarms, the fault situation might have no impact on the operation (BASE STATION NOTIFICATION),
Depending on the reported alarms,the fault situation might have no impact on the operation (BASE STATION or CELL NOTIFIC
Depending on the reported alarms, the fault situation might have no impact on the operation (BASE STATION or CELL NOTIFIC
Depending on the reported alarms, the fault situation might have no impact on the operation (BASE STATION or CELL NOTIFIC
Depending on the reported alarms, the fault situation might have no impact on the operation (BASE STATION NOTIFICATION),
The BTS is not operational.
The related cell remains down.
The BTS is not operational or the capacity is degraded.
The module might have been started with an old SW version and is, therefore, not compatible with other modules.
This fault can prevent BTS from functioning when the RF Module is needed for the required cell configuration.
The affected cells are disabled.
Not enough RP3-01 capacity for commissioned cells. Commissioned cells using the missing RP3-01 link are not activated.
The BTS functionality is degraded and/or resources are unavailable.
Newly downloaded SW will overwrite active SW. Therefore, SW download and activation are not allowed. Currently active SW i
Radio module is powered off, therefore calls/data transfers cannot be served by that module.
IP address conflict has been reported between RP3-01 nodes.
When
All cellsthere is the
using the same
IP address
radio conflict,
module arethe conflicting
down. (later identified) RP3-01 node is not detected and thus it is not seen on the
This fault prevents the impacted RF unit from working.
Effect in issue 01
The operation of the BTS possibly decreases.
Flexi BTS FDD, Flexi BTS TDD:_x000D_
If thefault
This FSPdoesupdate notfails, the BTS affect
immediately capacitythe drops.
operationsIf theofoptical
the BTS, interface
but it FPGA SW update
is a notification thatfails,
the communication
BTS master clock to radio modules
frequency dev
_x000D_
The BTS master clock tuning continues regardless of the alarm, but because the BTS master clock adjustment is quite slow to
The module
Flexi Zone Micro in question is outZone
FDD, Flexi of use. This
Micro fault cancels all the active faults for the same module.
TDD:_x000D_
The BTScell orisall
notcellsoperational._x000D_
are not operational.
The BTS capacity possibly decreases. Some cells might become disabled._x000D_
The BTS is provided
Resources out of order. by the module cannot be used, which means that some features might not work._x000D_
_x000D_
Resources provided by the module cannot be used, which means that some features might not work._x000D_
If the fault is reported for FR module, BTSOM does not know the real FR module state, and thus BTS SM keeps FR LED displa
_x000D_
Real time isthe
Therefore, notRF available.
LEDforand Alarms,SM logs, and all reports have incorrect time.
If the fault is reported FRBTSmodule, LED display
the BTSOM status
does not cannot
knowbe aligned.
the FR module's real state, and thus the BTS SM keeps the F
The BTS continues
situation. Therefore,its operation
there with the old
is no possibility file. the RF LED and BTS SM LED display status.
to align
The BTS continues its operation with the old software.
If the SW download to any HW unit has failed, the eNB continues operating with the currently running SW version._x000D_
_x000D_
The BTS does not send faults related to the blocked module to the network management system (NMS). The fault sending to B
If the SW activation has failed on FCM/FCT in the master FSM, the eNB continues operating with the currently running SW vers
_x000D_
The
_x000D_BTS does not send any faults related to the blocked cell or the modules commissioned to the blocked cell to the network m
It is not possible to establish phone calls through the blocked module.
_x000D_
If theBTS
The SW does
activation has failed
not send on another
any other HW unit
faults other than(for example,
transport RFtounit),
faults then:_x000D_
the network management system (NMS) when the BTS is
Calls
1. The
_x000D_ through
eNB the blocked
restarts and cell are with
operates transferred
the new toSWanother
versioncell.installed._x000D_
It is not possible to establish new calls through the blocked cell.
Flexi BTS FDD, Flexi BTS TDD:_x000D_
2.
All
The Eventually,
cells if the SM
are disabled.
operator (BTS eNBandis integrated
OMS/NetAct) to theis NetAct,
informedafter aboutthetheautomatic recovery SW update,
autonomously-triggered the eNB
recovery restarts and operates wit
reset._x000D_
Flexi
_x000D_ BTS FDD, Flexi BTS TDD:_x000D_
_x000D_
FCM/FCT or FTM is fault source: BTS startup is terminated._x000D_
Flexi
Flexi Zone
BTS
Zone Micro
FDD,
Micro FDD,
Flexi
FDD, Flexi
BTS
Flexi Zone
ZoneisMicro
TDD:_x000D_
Micro TDD:_x000D_
TDD:_x000D_
FSP
The or
SW DSP is fault source: FSP not taken into use._x000D_
The BTSupdate
Depending
Depending
_x000D_ is on theto reported
operational.
on the this BTS severity,
reported might notthe
severity, beBTS
the possible
BTS capacity
capacitywithout
might
mightspecial
have actions.
have decreased
decreased The(BASE
BTS continues
(BASE STATIONits
STATION operation with
OPERATION
OPERATION the old software
DEGRADED,
DEGRADED, CEL
CEL
_x000D_
For resources that are not in use (not commissioned) lack of support_x000D_
Flexi
The BTS
Flexi Zone Micro
Zonememory
Micro FDD, Flexi
operations,
FDD, Zone Micro
for example
Flexi Zone Micro TDD:_x000D_
the software download and parameter updates, are not stable._x000D_
TDD:_x000D_
is
BTS reported
service byisminor
degradedseverity alarm
or out (BASE STATION NOTIFICATION).
_x000D_
BTS BTS
The is notmemory
operational.operations, forofexample
service._x000D_
the software download and parameter updates, are not stable._x000D_
_x000D_
The
_x000D_ISTI (In Service Time Indicator) value for HW Repair Center might not be correct or readable.
The
Flexi BTS memory operations, for example the software download and parameter updates, are not stable._x000D_
Zone:_x000D_
The
_x000D_ISTI (In Service Time Indicator) value for HW Repair Center might not be correct or readable.
FlexiBTS
The Zonememory
Accessoperations,
Point service forisexample
degraded theorsoftware
out of service.
download and parameter updates, are not stable._x000D_
The
_x000D_ISTI (In Service Time Indicator) value for HW Repair Center might not be correct or readable.
The BTS memory operations, for example the software download and parameter updates, are not stable._x000D_
The
_x000D_ISTI (In Service Time Indicator) value for HW Repair Center might not be correct or readable.
The BTS capacity decreases. The digital signal processing (DSP) does not work correctly.
The ISTI (In Service Time Indicator) value for HW Repair Center might not be correct or readable.
Flexi BTS FDD, Flexi BTS TDD, Flexi Zone Micro FDD, Flexi Zone Micro TDD:_x000D_
The
FlexiBTS BTScapacity
FDD, Flexi decreases or BTS is not operational. The Digital Signal Processing (DSP) does not work correctly._x000D_
BTS TDD:_x000D_
_x000D_
The BTS is not operational or thefunctionality.
capacity is degraded._x000D_
There
Flexi is no actual
Zone:_x000D_ effect to BTS This is user-specific.
_x000D_
The
There overall
is no Flexi
actual Zone Controller
effect to BTS capacity
functionality.
Flexi Zone Micro FDD, Flexi Zone Micro TDD:_x000D_ has decreased
This since the Flexi Zone Access Point is not operational.
is user-specific.
The BTS
There is not
is no actual operational.
effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
There is no actual effect to BTS functionality. This is user-specific.
The BTS is not operational.
Some action inside the BTS is interrupted. The BTS does not operate normally. The fault is in the unit reported in the fault sourc
Flexi BTS FDD, Flexi BTS TDD:_x000D_
The
This BTSfault capacity
preventspossibly
the BTSdecreases.
from functioning. The cell with incorrect
Depending configuration
on <x>, some processing is not working._x000D_
resources, some cells, or the whole BTS are
_x000D_
This fault can prevent the BTS from functioning
Flexi Zone Micro FDD, Flexi Zone Micro TDD, Flexi Zone: _x000D_ when the RF Module is needed for the required cell configuration.
The BTS
Flexi BTScapacity
FDD, Flexi possibly decreases.
BTS TDD:_x000D_
_x000D_
The system clock frequency starts drifting and the air interface frequency accuracy starts to degrade. The BTS might work prop
FDD:_x000D_
Flexi
If other BTS FDD, Flexi
references areBTS TDD:_x000D_
available, the synchronization reference source changes to another source. Tuning then follows this new
The
If
The BTS
other
BTS can
is notoperate
references areproperly for months
not available,
operational. the BTS or even
master a year
clockwhen being
(OCXO) in theis5%
tuning margin
halted andarea, but eventually
the BTS the DAC
synchronization drops value reac
to holdo
synchronization
_x000D_ setting defined in the BTS commissioning._x000D_
The
_x000D_ BTS is not commissioned or integrated to the network. The BTS cannot be accessed or configured remotely._x000D_
TDD:_x000D_
_x000D_
Effects
The
If otherBTS in FDD Frequency
cannot
references goare
to the Synchronization
operational
available, state.mode:_x000D_
the synchronization reference source changes to another source. Tuning then follows this new
Assuming
The MHA is degraded and the RX signal has
If no other that
validthe BTS
reference reference
available, signal
BTS correct
tuning
level mode
might accuracy
bemoves whennormal
from
decreased. the DAC
The size value
to of
holdover.reaches
the cell the
be adjustment
If holdover
might limit 0because
is not possible
reduced. or 4095 (mea
of ins
not
_x000D_met any more. Even in that stage the BTS might still be operational but the system performance might drop, affecting, for ex
The
_x000D_ MHA is faulty and the RX performance might be degraded. The size of the cell might be reduced.
Flexi Zone Micro FDD, Flexi Zone Micro TDD, Flexi Zone:_x000D_
Effects
The
Tuning in FDD
antenna
does not Phase
line is notSynchronization
follow operating
the external mode:_x000D_
correctly. The cell capacity might be decreased.
reference._x000D_
When
ClockBTS
Flexi the
tuningDAC value
is halted
FDD, reaches
and the
Flexi BTS the adjustment
BTS continues its
TDD:_x000D_ limit 0 or 4095,
operation the basic
based on theLTE system
internal ovenoperation effects are the same as in Freque
oscillator._x000D_
more._x000D_
The air interface accuracy of 0.05 ppm is kept for at least 24 hours. Within that time, the BTS can work properly but
In
The VSWR
_x000D_ outputThreshold
power at Tuning modeis- no
the antenna impact tobecause
decreased the state ofof the
the cell/Radio
reflection Module._x000D_
of the signal in the TX path. The antenna is the
not network
working
Otherwise TXes that go through the affected Antenna Line are disabled._x000D_
Flexi
The Zone
RX path
In result:_x000D_ Micro FDD,
operating Flexi Zone
performance Micro
is TDD:_x000D_
decreased.
This
-The fault
thesignal ispath
cell thatanhasindication
is lost thatThe
its only
unusable. the or
TX system
hasusing
cells noclock
thetuning
faulty range
PrimaryTx is nearing
available
unit might isnot its limit after which the system clock frequency can longe
disabled_x000D_
work.
the
-The Flexi
thesignal Zone
cell that Micro
stillishas BTS must
PrimaryThe be
TX cells scheduled
available, butfor replacement. The amount
TX isof time betweenSuchthe reporting of the
its 1818 fault and
cannot be path
supported. unusable.
However, if there using
is a thehas
defectfaultylostunit
its might
associated
Secondary
withnot
thework.
system
degraded.
clock, a much
a cell
shorter
also loses
period might
MIMO/VAM
be available.
ca
- the Radio Module becomes degraded_x000D_
The BTS capacity might be decreased.
_x000D_
Flexi
The BTSZonecapacity
Micro FDD,mightFlexi Zone Micro TDD:_x000D_
be decreased.
The cell is disabled._x000D_
The BTS capacity might be decreased.
Downlink signal transmission on the given antenna line is disabled and the corresponding FR transmitter is unusable. Thus, the
The BTS capacity might be decreased.
The BTS capacity might be decreased.
The antenna line device does not work properly. The cell operation is degraded.
The device is out of use.
The module might have been started with an old SW version and is therefore not compatible with other modules.
The BTS capacity is lost.
Heating from the heating element is not available. The module temperature might not reach the working level or might reach it v
The BTS capacity drops. The cell is not operational.
The MHA's gain might be decreased. The cell performance might be decreased as well. The real level of gain provided by MHA
MHA doesn't provide gain in RX path. The cell performance might be decreased. Within recovery action missing gain is compen
Some antenna line device functions might not work properly.
Some antenna line device functions might not work properly.
Some antenna line device functions might not work properly.
Some antenna line device functions might not work properly.
The BTS functionality is degraded and/or resources are unavailable.
The BTS functionality is degraded and/or resources are unavailable.
Flexi BTS FDD, Flexi BTS TDD:_x000D_
_x000D_
If other references are available, the synchronization reference source changes to another source. Tuning then follows this new
FDD:_x000D_
_x000D_
Calls
If are not possible through thethe affected cell(s).
If other
other references
references are are available,
not available, synchronization
the BTS master clock reference source
(OCXO) changes
tuning to another
is halted and thesource, the tuning follows
BTS synchronization thistonew
drops holdor
_x000D_
Calls are not possible through the affected cell(s).
If
Theother
RF references are not available,
Module is configured tuning does
using defaults and thenot performance
follow the external reference
is not as any more. Clock tuning is halted and the BTS
expected.
_x000D_
Calls
If the are
FCMnot possible
[FSMr3: through
FCT] the affected
is approaching thecell(s)
end of (7653 CELL but
its lifetime FAULTY)._x000D_
the reference frequency is still correct, the BTS and system p
_x000D_
_x000D_
Calls are not possible through the affected cell(s) (7653 CELL FAULTY)._x000D_
There might be problems in the calls through the affected cell(s) (7654 CELL OPERATION DEGRADED).
TDD:_x000D_
_x000D_
Calls are not possible through the affected cell(s) (7653 CELL FAULTY)._x000D_
If othermight
There
_x000D_ references are available,
be problems the synchronization
in the calls through the affected reference
cell(s)source
(7654 changes to another DEGRADED)._x000D_
CELL OPERATION source. Tuning then follows this new
There
_x000D_ can be problems in the phone calls through the affected cell(s) or calls can be impossible.
There can be problems in calls through the affected cell(s) (7654 CELL OPERATION DEGRADED)._x000D_
If
No noimpact
Flexi
_x000D_other valid
on
BTS FDD, reference
system (7652
Flexi BTS available,
BASE STATION
TDD:_x000D_ BTS tuning mode moves from normal to holdover. If holdover is not possible because of ins
NOTIFICATION).
_x000D_
Calls
No are
impact not
on possible
system through
(7652 the
BASE affected
STATION cell(s)._x000D_
NOTIFICATION)
There might be problems in the calls through the affected cell(s).
Flexi Zone Micro FDD, Flexi Zone Micro TDD:_x000D_
_x000D_
Calls
The BTS
Flexi are not
Zone possible
supports
Micro through
an integrated
FDD, Flexi Zone theGPS affected
Micro cell(s).
receiver. If there is a prolonged loss of the GPS 1PPS clock there is likely a hardware fail
TDD:_x000D_
The Flexi
Calls Zone
are not Micro BTS
possible through RX theis disabled
affectedand the (7653
cell(s) cell is CELL
unusable, the BTS is rebooted (7653 CELL FAULTY)._x000D_
FAULTY)._x000D_
The Flexi
_x000D_ Zone Micro BTS RX is disabled, calls are possible
The TX/RX paths of the RF module are out of order and phone calls through using the remaining RX, but cell
the affected capacity
cell(s) are notand performance might d
possible.
The problems might occur in the calls through the affected cell(s) (7654 CELL OPERATION DEGRADED).
Flexi BTS FDD, Flexi BTS TDD:_x000D_
The
There TXcanpartbeisproblems
out of powerin the and calls
calls are notthe
through possible
affected through
cell(s).the affected cell(s)._x000D_
_x000D_
There can be
Flexi Zone problems
Micro FDD, Flexiin theZonecallsMicro
through the affected cell(s).
TDD:_x000D_
Callsfault
This are not
shouldpossible
cancel through the affected cell.
itself. _x000D_
Heating of the module is ongoing._x000D_
The RF Module configuration might fail and cause another fault, and there can be problems in the calls through the affected cel
During RF startup affected cell resources are not reported to RROM.
The default configuration is used and the cell TX and/or RX performance is degraded. There can be problems in the calls throu
The cell's TX and/or RX performance might be degraded because of the failure or calls are not possible through the affected ce
Flexi BTS FDD, Flexi BTS TDD:_x000D_
The
The TXcommunication
power level is between
decreased the System
and there Module
can beand RF module
problems with might
phonebe corrupted.
calls through Calls are not cell(s).
the affected possible through the affecte
_x000D_
There can be
Flexi Zone problems
Micro FDD, Flexiin callsZonethrough
Microthe affected cell(s).
TDD:_x000D_
The
It communication
is not betweenphone
possible to establish the System Module the
calls through andblocked
RF module might be corrupted. Calls are not possible through the affecte
FR._x000D_
_x000D_
Default values for fan parameters are to be used.
The BTS does not send faults related to the blocked Flexi Radio module (FR) to the network management system (NMS). Fault
If the fans do not rotate as required, the module's temperature might rise too high.
If the fans do not rotate as required, the module temperature might rise too high.
If the fans rotate faster than required, they cause unnecessary noise.
The RF module might overheat, but there is no immediate effect on the module's operation.
Calls are not possible through the affected cell(s).
There might be problems with calls made through the affected cell(s).
Calls and data transmissions are possible with degraded quality and lower bandwidth because of increased bit error rate on opt
Calls and data transmissions are not possible through the affected cell(s).
The cell, using the RF module which notified the fault, is disabled._x000D_
_x000D_
The Flexi BTS unit in question is transmitting or receiving data with degraded performance. The fault does not trigger special ac
Downlink signal transmission on the given antenna line is disabled and the corresponding FR transmitter is unusable. Hence, th
The traffic between the System Module and the connected radio module is interrupted. The cell operation is faulty._x000D_
_x000D_
The traffic between the System Module and the connected radio module is interrupted. The cell operation is faulty._x000D_
The traffic between the Baseband Module (for example, FBBC) and the connected radio module is interrupted. The cell operatio
_x000D_
The cell(s) of the RF Module behind the broken connection are not operational and the RF Module cannot be used.
_x000D_
The traffic between the Baseband Module (for example, FBBC) and the connected radio module is interrupted. The cell operatio
If
Thethecell
_x000D_ fault is reported
operation for primaryThe
is degraded. optical interface,
optical interface connection to radio modulesif further
loses its synchronization in theofchain
the amount is exceeds
errors affected the
by what is indicat
defined limit.
If
RP3thetraffic
fault istoreported for primary
the connected optical is
RF Module interface, connection
malfunctioning. Thetorelated
radio modules
cell(s) arefurther in the chain is affected by what is indicat
not operational.
Baseband bus RP3 traffic to the RF Module is not working. Cell operation is degraded._x000D_
Baseband bus RP3 traffic to the RF Module is not working. Cell operation is degraded._x000D_
Baseband bus RP3 traffic to the RF Module is not working. Cell operation is degraded._x000D_
There is possibly no immediate effect on the BTS operation, but it might cause an optical interface alarm.
The traffic between the System Module and RF Module is unreliable. Some calls or other connections might be lost.
The connection to the associated link is lost. The data is partially or completely lost. The worst-case fault effect can expand furt
_x000D_
Data traffic to the connected RF Module is malfunctioning. BTS operation is faulty._x000D_
This fault can prevent the BTS operation when the RF Module is needed for the required cell configuration._x000D_
RP3 traffic from the baseband is malfunctioning. The System Module or FBBx Module operation is degraded.
_x000D_
fault is visible
The System Moduleonly for the
is out first radio
of order in the
and the BTSchain.
is outFault 10 sends for the other FRs when pooling breaks because of the lost
of order._x000D_
The System Module is out of order and the BTS is out of order._x000D_
Baseband bus RP3/RP3-01 traffic might work incorrectly. The cell operation is degraded.
An SW update is needed.
The BTS operation is degraded because some of the BTS resources are not available.
The BTS operation is degraded because some of the BTS resources are not_x000D_
available.
The BTS operation is degraded because some of the BTS resources are not available.
The BTS operation is degraded because some of the BTS resources are not available.
The BTS operation is degraded because some of the BTS resources are not available.
Depending on the reported alarms, the BTS capacity might have decreased (BASE STATION OPERATION DEGRADED) or the
Depending on the reported severity, the BTS capacity might have decreased (BASE STATION OPERATION DEGRADED), or th
Depending on the reported alarms, the BTS capacity might have decreased (CELL OPERATION DEGRADED or CELL FAULTY
If the fans are not rotating as expected, there is a risk that the module temperature rises too high. For example, a Temperature
Depending on the reported alarms, the fault situation might have no impact on the operation (BASE STATION NOTIFICATION),
(BASE
Flexi BTS STATION FAULTY).
FDD, Flexi BTS TDD:_x000D_
_x000D_
Flexi BTS FDD, Flexi BTS TDD:_x000D_
FDD:_x000D_
The BTS capacity or might have
The
1. newreported
If the installed alarm failed HWdecreased._x000D_
is 7652 resources
BASE STATION are notNOTIFICATION,
available beforethe theBTS
BTSishasusingbeen
thereset.
lower priority synchronization source as a
_x000D_
2.
Any If the reported
attempt by thealarm is
operator 7651to BASE
configure
Flexi Zone Micro FDD, Flexi Zone Micro TDD:_x000D_ STATION
modes OPERATION
other than DEGRADED,
single TX mode the
for BTS
the has
cell willno
bevalid synchronization sources as a
unsuccessful.
fault situation
Configured lasts
LNCELs
The cells remain down. for a long
greater time,
than the
the accuracy
maximum starts
allowed to drift
are slowly.
ignored. However,
Configured it might
Cells take
that several
exceed weeks
the beforeallowed
maximum the BTS/RAN
numb
_x000D_
The fault has no direct impact on the operation (BASE STATION NOTIFICATION).
TDD:_x000D_
1.
The If the
BTSreported
does notalarmfunctionis 7652 BASESome
correctly. STATION NOTIFICATION,
BB processing resourcesthe BTS
in theisBTS
usingaretheoutlower priority synchronization source as a
of use.
depends on the quality of the used lower
The BTS resources have decreased or the BTS is faulty. level source._x000D_
_x000D_
Flexi
_x000D_ BTS FDD, Flexi BTS TDD:_x000D_
The BTSreported
2. If the
Depending operation
on thealarm is degraded
reported is 7651
alarm, (FSP
BASEthe is faulty,
STATION
fault alarm 7651)have
OPERATION
situation might or a cell of the BTS
DEGRADED,
no impact onthe isBTS
the out has
of order
operation (FSP
no(BASE
valid is faulty, alarm
synchronization
STATION 7653) oras
sources
or CELL thea
NOTIFIC
_x000D_
fault situation
FAULTY).
The
Flexi BTS notlasts
ZoneisMicro
for a long time, the accuracy starts to drift slowly. However, it might take several weeks before the BTS/RAN
commissioned.
FDD, Flexi Zone Micro TDD:_x000D_
_x000D_
The
Flexi
_x000D_BTS
BTSoperation
FDD, Flexi is BTS
degraded (FSP) or the BTS is not operational (FCM/all FSPs).
TDD:_x000D_
BTS
This startup
If thefault canisprevent
reported interrupted
alarm isthe
7650 andBASE
BTS the
fromBTS is out of
STATION
functioning order._x000D_
FAULTY,
when theradio
the BTS unit
has isbeen in holdover mode and holdover time is run out. BTS is
needed_x000D_
_x000D_
_x000D_
for the required cell configuration.
The
Flexi BTS isMicro
not operational or is degraded.
Flexi Zone
Zone Micro FDD, FDD, Flexi
Flexi Zone
Zone Micro
Micro TDD:_x000D_
TDD:_x000D_
The
None BTS
signalcapacity
path is might
unusable. decrease
The or there
cells usingmight be interference
the faulty in calls
unit might not work.(commissioning data)._x000D_
BTS startup is interrupted and the BTS is out of order (RNW data).
This cell-specific fault does not prevent cell configuration. It is for informative purposes only.
The antenna line is not operating correctly. The cell is disabled. _x000D_
The antenna line is not operating correctly. The cell capacity decreases.
The RS485 interface is not operating correctly. Communication with TILT devices is not possible.
BB resources are shut down, the BTS operation will be faulty. _x000D_
FCM
Cells and FTM
are not are kept Itpowered.
activated. relates to cells that were going to use the radio unit connected to the system module via the faulty fibe
Fan control is not optimized. _x000D_
The
The effect
Radio to noise/temperature
Module connected tolevel is marginal.
this OptIF is not started.
The FSP resource is shut down and the BTS operation will be degraded or faulty._x000D_
The
If theFCTfansand possibly
do not rotateother FSPs thatthe
as requested, aremodule
not alarming are kept
temperature powered.
might rise too high.
If the fan(s) do not rotate as requested, the module temperature might rise too high.
If the fans rotate faster than requested, unnecessary noise is emitted.
The source unit has an inconsistent SW version.
The source unit has an inconsistent SW version.
The source unit has an inconsistent SW version.
Flexi BTS FDD, Flexi BTS TDD:_x000D_
Module
The cell cannot:_x000D_
is disabled (the downlink carrier that transmits PSS/SSS signals has failed)._x000D_
1.
The savecell in
is file a cause(the
degraded of the SW fallback
downlink carrieron thatrequest_x000D_
transmits PSS/SSS signals is working)._x000D_
The ongoing
or_x000D_ BTS reset will last longer.
2.
The mount
cell orpassive
BTS isfile notsystem thus read
operational the cause of SW fallback on request from the file._x000D_
or is degraded.
_x000D_
None
Flexi Zone Micro FDD, Flexi Zone Micro TDD:_x000D_
The system
BTS/Flexi Zonemodule is out
Access of order
Point and the BTS is out of order.
cannot:_x000D_
1.
The savefaultinhasfile no
a cause
directof the SW
impact on fallback on request_x000D_
the operation (BASE STATION NOTIFICATION).
or_x000D_
The fault has no direct impact on the operation (BASE STATION NOTIFICATION).
2. mount passive File System thus read the cause of SW fallback on request from the file.
The fault has no direct impact on the operation (BASE STATION NOTIFICATION).
The fault has no direct impact on the operation (BASE STATION NOTIFICATION).
The fault has no direct impact on the operation (BASE STATION NOTIFICATION).
DC voltage is disabled on reporting Antenna Line.
The HDLC link will be disabled on the reporting Antenna Line or IUANT port.
In case of problem detection in SW activation, the SW activation and consequent reset are aborted._x000D_
In case is
Startup of continued
problem detection in start-up,clock
without reference the BTSbut BTSremains
is notout of order.
directed Rollback to the previous SW and another SW download
to OnAir.
Radio unit connected to port 3 or 4 of FBBC card cannot provide services to cell/cells and the cell/cells are degraded or not ope
The BTS is operational.
When the fault is detected during startup, the BTS is not operational. When the fault is detected during runtime, the requested n
Flexi BTS FDD:_x000D_
If
Theanother
PHICH synchronization
transmission power sourceis isnotavailable,
boostedthe BTS or
enough starts
at alltocompared
use that for tothe
theBTS reference.
operator's Then there are no effects to the
setting.
_x000D_
Cell operation
If there are no is downgraded.
other synchronization sources available, the external GPS/GNSS receiver module continues providing the refere
of
Forthe S1:phase
The eNB drifting,
lost the
the phase deviation
connection is considered
to S-GW. to reach
All calls using thethe threshold
failed GTP-Uvalue and then
data path the features
are released, andrequiring phase
new GTP-U sync
data tun
still within the required limits,
The S1 interface is unavailable. _x000D_ typically over several months._x000D_
_x000D_
_x000D_
The X2 interface is unavailable. Handover of calls to or from cells of the associated adjacent BTS is not possible. Base station (
_x000D_
If no other S1 interface is available for use, BTS operation is considered faulty and no calls can be set up. _x000D_
Flexi
One
_x000D_ BTS
of theTDD:_x000D_
transport paths(SCTP) in SCTP connection to MME has failed. Only applicable when SCTP multi-homing is supporte
If another
If there
BTS synchronization
is atconfigured
is not othersource
least one according toisradio
available,
S1 interface available
network BTS starts
for
plan file.toBTS
use, useisthat for the
operation is BTS reference.
considered
waiting_x000D_ Then there
degraded areBTS
and the no effects to the BT
can continue op
_x000D_
for the correct radio network configuration file.
The
If therecellareis disabled.
no other synchronization sources available, the external GPS/GNSS receiver module continues providing the refere
because
The cell isofdisabled.
the phase drifting, the phase deviation is considered to reach the threshold value and then the air interface (cells) a
In the case of subscriber trace activation, if the failed trace connection was used for sending the trace reports, the BTS conside
_x000D_
BTS startup is interrupted and the BTS is not operational.
In the case of cell trace and interface trace, if the failed trace connection was used for sending the trace reports, the BTS does
Trace session (for subscriber/cell/interface) cannot be activated/deactivated.
The BTS cannot accept new UEs attempting registration in any of the reported misconfigured PLMNs. Such an attempt by new
_x000D_
The fault has no effect on the base station operation but the LNADJ and/or LNADJL object was not stored in the eNB.
The UEs that might have already registered in misconfigured PLMN(s) remain unimpacted.
The fault has no effect on the base station operation but LNADJW object with newly learnt WCDMA neighbor cell configuration
The fault has no effect on the base station operation but LNRELW object with newly-learnt WCDMA neighbor relation configura
The fault has no effect on the base station operation. The WCDMA neighbor relation, which is reported by a UE because of acti
1)
Nohas not been
handover canstored because to
be performed the actual
cells withnumber of LNRELW
the affected PCI andper cell (LNCEL) per UTRAN carrier (in ANRPRW profile) is equ
frequency.
2) has been stored but at least one of LNRELW's mobility paremeters (psHoAllowed, srvccAllowed) has been set to 'forbidden'
The cell that cannot be recovered remains unavailable.
If an X2 link is available, no type of handover to the neighbor cell is possible at all._x000D_
If
Thethehandover
UE-basedfailure
ANR rate
is activated, there will
for the affected bemight
cell continuous retries to resolve the ECGI.
be increased.
The following feature(s), which require phase sync, are taken out of service: _x000D_
LTE1113
Handovers eICIC
from or to cells of the related adjacent BTS are not possible.
Handovers to cells of the related adjacent BTS are not possible.
The S1 interface is not available for call setup and existing calls are released.
The S1 interface is unavailable and the BTS is not available for call setup.
The cell is deactivated (switched off) until S1 availability is regained.
If the update of the TAC or PLMN identities was not successful, the eNB performs S1 setup which means service loss for affect
System Information for the related GERAN neighbor cells is not reliable and will not be provided to UEs, which are released wit
System Information for the related GERAN neighbor cells is not reliable and will not be provided to UEs, which are released wit
Some of the UEs with a complete set of system information of the cell stored that has left the cell and has come back within thre
This fault has no effect on BTS operation.
There is high memory usage, which might result in memory outage.
Flexi BTS FDD, Flexi BTS TDD:_x000D_
Critical
The BTS impact on FSP
capacity operation._x000D_
decreases or the BTS is not operational. The Digital Signal_x000D_
_x000D_
Processing (DSP) does not work correctly.
The
FlexiBTS Zonecapacity
Micro FDD, decreases
Flexi Zone or the BTS TDD:_x000D_
Micro is not operational. The Digital Signal_x000D_
Processing
Critical
The BTS impact (DSP)
on the
capacity does not
operation.
decreases work correctly.
or the BTS is not operational. The Digital Signal_x000D_
Processing (DSP)
The fault has no further consequences. does not work correctly.
The BTS does not take the new settings into use before a reset.
The communication link between the BTS and the BFD peer is defective. No communication is possible.
Possible impact on the connections over this interface:
-Possible no calls impact
are possible
on the connections over this interface:_x000D_
-- loss no of remote
calls management
are possible access to other network elements in the RAN
anymore_x000D_
Possible
-- loss of effects:_x000D_
synchronization if the interface
-Flexi loss of remote
no calls are management access
possible._x000D_ to isother
usednetwork
as synchronization source.
elements in the RAN_x000D_
-- loss BTS
of FDD, Flexi
synchronization BTS if TDD:
the interface is used as a synchronization source
The lossinterface
of remote management
cannot access to other network elements in the RAN_x000D_
Possible impact:
- loss of synchronization The be BTS used
if is
for
thenot
transmission.
synchronized
interface is usedtoasthe network anymore.
a synchronization source._x000D_
-Flexi
The BTS IKE SAs
Zonemay and
MicroIPSec
haveFDD, SAs
to use
Flexi cannot
a Zone be established
synchronization or re-keyed
Micro TDD:interface that has a lower clock
quality:
The Certificate if the primary
interface cannot
Revocationclock
be used source
Listfor hasnotbeen
transmission.
could lost, the BTSNewswitches
Conditionally,
be updated. Bluetooth
revoked is enabled when the backhaul goes down.
certificates_x000D_
automatically
The
remain SFP unknown to
module's the
to secondary
laser
the is
BTS. not clock
switchedsource.
on orIf
noboth
SFP the primary
module anddetected
was the at all.
Normal
secondary traffic is interrupted.
clock areOnlylost, loopback OAM frames are transmitted
clock.and received over the interface. If the test frame gener
The Ethernet Linksources
is down. the BTS switches to the internal
The
An Ethernet EthernetLink interface
cannot might be out of order
be successfully or the remote peer might be out of order. Traffic might get lost.
established.
No Ethernet data or clock information
The Ethernet interface is defected or the remote peer is exchanged viaisthis interface.
defective. Traffic might get lost.
The SFP is not operational.
Possible impact on the connections over this interface:
Possible
- voice calls impact:
or data connections cannot be established.
--Possibleslow management
impact: the access
remote management to the management
connectivity
performance WBTS
cannotand be other
datanetwork
established.
collected elements in the RAN
on this interface becomes invalid.
-- poor loss voice
of quality and data
synchronization if theperformance
interface is used as a synchronization source
Possible
-- ifDepending impact
this interface on the
is part connections
of an IMA group, over the interface
this IMA in question:
-Possible areon
no calls impact use
possible of the Ethernet interface, the link
aboveis todescribed
be temporarily
impactsuspended from
can occur for operation
the local BTS and/or other BTS elemen
on the connections over this interface:
-- loss of remote
no calls management access to other network elements in the RAN
are possible
Possible impact:_x000D_
-_x000D_
loss of remote management access to other network elements in the RAN
The
-- losstransport connection towards
of synchronization the remote peer
as amay be defective. source
Traffic may get lost.
no calls are possible forifthe theconnections
interface is used
over this synchronization
unit_x000D_
The transport
_x000D_ connection towards the remote peer may be defective. Traffic may get lost.
-None
loss of remote management access to other network elements in the RAN
The requested service is not available.
The communication link between the BTS and the BTS peer is defective. Or the peer is defective. No communication is possibl
The communication link between the BTS and the BFD peer is defective. No communication is possible.
If the alarm is active, then potentially there is a synchronization loop
None
None
BTS will not have time synchronisation.
Flexi Zone Micro FDD, Flexi Zone Micro TDD:
SyncE is no longer
There might a working
be available synchronization
another source.
synchronization source at eNB; in that case the BTS switches automatically to the other clock
The BTS does not send faults related to the blocked module to the network management system (NMS). The fault sending to B
_x000D_
The BTS does not send any faults related to the blocked cell or the modules commissioned to the blocked cell to the network m
It is not possible to establish phone calls through the blocked module.
The BTS does not send faults to the network management system (NMS) when the BTS is blocked. The fault cancellations are
Calls through the blocked cell are transferred to another cell. It is not possible to establish new calls through the blocked cell.
All cells are disabled.
Because the faulty FSP is not configured, the BTS capacity decreases or the BTS is faulty.
Depending on the reported severity, the BTS capacity might have decreased (BASE STATION OPERATION DEGRADED, CEL
Depending on the reported severity, the BTS capacity might have decreased (BASE STATION OPERATION DEGRADED, CEL
For
The resources
BTS memory thatoperations,
are not in use
for (not commissioned)
example lack
the software of support
download and parameter updates, are not stable.
is reported by minor severity alarm (BASE STATION NOTIFICATION).
The BTS memory operations, for example the software download and parameter updates, are not stable.
ISTI (In Service Time Indicator) value for HW Repair Center might not be correct or readable.
The BTS memory operations, for example the software download and parameter updates, are not stable.
ISTI (In Service Time Indicator) value for HW Repair Center might not be correct or readable.
The BTS memory operations, for example the software download and parameter updates, are not stable.
ISTI (In Service Time Indicator) value for HW Repair Center might not be correct or readable.
The BTS memory operations, for example the software download and parameter updates, are not stable.
ISTI (In Service Time Indicator) value for HW Repair Center might not be correct or readable.
BTS capacity decreases. The digital signal processing (DSP) does not work correctly.
ISTI (In Service Time Indicator) value for HW Repair Center might not be correct or readable.
The BTS capacity decreases or BTS is not operational. The Digital Signal Processing (DSP) does not work correctly.
BTS is not operational or the capacity is degraded.
No actual effect to BTS functionality. This is user-specific.
No actual effect to BTS functionality. This is user-specific.
No actual effect to BTS functionality. This is user-specific.
No actual effect to BTS functionality. This is user-specific.
No actual effect to BTS functionality. This is user-specific.
No actual effect to BTS functionality. This is user-specific.
No actual effect to BTS functionality. This is user-specific.
No actual effect to BTS functionality. This is user-specific.
No actual effect to BTS functionality. This is user-specific.
No actual effect to BTS functionality. This is user-specific.
No actual effect to BTS functionality. This is user-specific.
No actual effect to BTS functionality. This is user-specific.
No actual effect to BTS functionality. This is user-specific.
No actual effect to BTS functionality. This is user-specific.
No actual effect to BTS functionality. This is user-specific.
No actual effect to BTS functionality. This is user-specific.
No actual effect to BTS functionality. This is user-specific.
No actual effect to BTS functionality. This is user-specific.
No actual effect to BTS functionality. This is user-specific.
No actual effect to BTS functionality. This is user-specific.
No actual effect to BTS functionality. This is user-specific.
No actual effect to BTS functionality. This is user-specific.
No actual effect to BTS functionality. This is user-specific.
No actual effect to BTS functionality. This is user-specific.
No actual effect to BTS functionality. This is user-specific.
No actual effect to BTS functionality. This is user-specific.
The BTS is not operating.
Some activities inside the BTS are interrupted. The BTS does not operate normally. The fault is in the unit reported in the fault s
The BTS capacity possibly decreases.
This fault prevents the BTS from functioning. Depending on <x>, some processing resources, some cells, or the whole BTS are
This fault can prevent the BTS from functioning when the RF Module is needed for the required cell configuration.
The system clock frequency starts drifting and the air interface frequency accuracy starts to degrade. The BTS might work prop
The BTS can operate properly for months or even a year when being in the 5% margin area, but eventually the DAC value reac
synchronization setting defined in the BTS commissioning._x000D_
The BTS is not operational.
_x000D_
The BTS
Effects in is not Frequency
FDD commissioned or integratedmode:_x000D_
Synchronization to the network. The BTS cannot be accessed or configured remotely.
Assuming that thestart
The BTS cannot BTStoreference signal state.
the operational has correct accuracy when the DAC value reaches the adjustment limit 0 or 4095 (mea
not
If the MHA is faulty, the RX performance isBTS
met any more. Even in that stage the might still
degraded. The besize
operational but
of the cell the system
might performance might drop, affecting for ex
be reduced.
_x000D_
If the MHA
Effects is faulty,
in FDD PhasetheSynchronization
RX performance is degraded. The size of the cell might be reduced.
mode:_x000D_
When the DAC
The antenna value
line reaches
is not thecorrectly.
operating adjustment Thelimit
cell0capacity
or 4095 decreases.
the basic LTE system operation effects are the same as in Freque
The cell is disabled._x000D_
Downlink
The outputsignal transmission
power on the
at the antenna given antenna
is decreased line antenna
and the is disabled andworking
is not corresponding FR transmitter is unusable. Thus, the ove
optimally.
The RX path operating performance has decreased.
The module might have been started with an old SW version and is, therefore, not compatible with other modules.
The BTS capacity is lost.
Heating from the heating element is not available. The module temperature might not reach the working level or might reach it v
The BTS capacity drops.
The MHA gain is decreased or even producing a loss. The cell performance is decreased.
Some antenna line device functions may not work properly.
Some antenna line device functions may not work properly.
Some antenna line device functions may not work properly.
Some antenna line device functions may not work properly.
The BTS functionality is degraded and/or resources are unavailable.
The BTS functionality is degraded and/or resources are unavailable.
If other references are available, the synchronization reference source changes to another source. Tuning then follows this new
_x000D_
The calls are not possible through the affected cell(s).
If other references are not available, the BTS master clock (OCXO) tuning is halted and the BTS synchronization drops to holdo
The calls are not possible through the affected cell(s).
The RF Module is configured using defaults and the performance is not as expected.
Calls are not possible through the affected cell(s) (7653 CELL FAULTY).
Calls are not possible through the affected cell(s) (7653 CELL FAULTY).
There might be problems in the calls through the affected cell(s) (7654 CELL OPERATION DEGRADED).
Calls are not possible through the affected cell(s) (7653 CELL FAULTY).
There might be problems in the calls through the affected cell(s) (7654 CELL OPERATION DEGRADED).
There can be problems in the phone calls through the affected cell(s) or calls can be impossible.
There can be problems in calls through the affected cell(s) (7654 CELL OPERATION DEGRADED).
No
Callsimpact onpossible
are not system (7652 BASE
through STATION
the affected NOTIFICATION)
cell(s).
No
There might be problems in the calls through NOTIFICATION)
impact on system (7652 BASE STATION the affected cell(s).
Calls are not possible through the affected cell(s).
Calls are not possible through the affected cell(s) (7653 CELL FAULTY).
The TX/RX paths of the RF Module are out of order and phone calls through the affected cell(s) are not possible.
The problems might occur in the calls through the affected cell(s) (7654 CELL OPERATION DEGRADED).
The TX part is out of power and calls are not possible through the affected cell(s).
There can be problems in the calls through the affected cell(s).
There can be problems in the calls through the affected cell(s).
This fault should cancel itself.
Heating of the module
The RF Module is ongoing.
configuration might fail and cause another fault, and there can be problems in the calls through the affected cel
During RF startup affected cell resources are not reported to RROM.
The default configuration is used and the cell TX and/or RX performance is degraded. There can be problems in the calls throu
The cell TX and/or RX performance might be degraded because the failure or calls are not possible through the affected cell(s)
The communication between the System Module and RF Module might be corrupted. The calls are not possible through the aff
The TX power level is decreased and there can be problems with phone calls through the affected cell(s).
There can be problems in calls through the affected cell(s).
It is not possible to establish phone calls through the blocked FR.
Default values for fan parameters are to be used.
The BTS does not send faults related to the blocked Flexi Radio module (FR) to the network management system (NMS). Fault
If the fans do not rotate as requested, there is a risk that the module temperature rises too high.
If the fans do not rotate as requested, there is a risk that the module temperature rises too high.
If the fans rotate faster than requested, they cause unnecessary noise.
The RF Module may overheat, but there is no immediate effect on the module operation.
Calls are not possible through the affected cell(s)
There can be problems with calls made through the affected cell(s).
Calls and data transmissions are possible with degraded quality and lower bandwidth because of increased bit error rate on opt
Calls and data transmissions are not possible through the affected cell(s).
The cell is disabled.
Flexi BTS unit in question is transmitting or receiving data with degraded performance. Fault does not trigger special action on B
Downlink signal transmission on the given antenna line is disabled and corresponding FR transmitter is unusable, hence overal
The traffic between the System Module and the connected module is interrupted. The cell operation is faulty._x000D_
_x000D_
The traffic between the System Module and the connected module is interrupted. The cell operation is faulty._x000D_
If the fault is reported for primary optical interface, then connection to further radio modules in chain is affected what is indicated
_x000D_
The cell(s) of the RF Module behind the broken connection are not operational and the RF Module cannot be used.
If the fault is reported for primary optical interface, then connection to further radio modules in chain is affected what is indicated
The cell operation is degraded. The optical interface loses its synchronization if the amount of errors exceeds the defined limit.
RP3 traffic to the connected RF Module is malfunctioning. The related cell(s) are not operational.
#N/A
Baseband bus RP3 traffic to the RF Module is not working. Cell operation is degraded.
Baseband bus RP3 traffic to the RF Module is not working. Cell operation is degraded.
There is possibly no immediate effect on the BTS operation, but it might cause an optical interface alarm.
The traffic between the System Module and RF Module is unreliable. Some calls or other connections might be lost.
The connection to the associated link is lost. The data is partly/completely lost. The worst-case fault effect can expand further fr
_x000D_
Data traffic to the connected RF Module is malfunctioning. BTS operation is faulty._x000D_
This fault can prevent the BTS operation when the RF Module is needed for the required cell configuration._x000D_
RP3 traffic from the baseband is malfunctioning. The System Module operation is degraded.
_x000D_
Fault is visibleModule
The System for the is
first
outradio in chain
of order and only. Fault
the BTS is 10
outisofsending_x000D_
order._x000D_
for the other FRs, when pooling breaks because of the lost
The System Module is out of order and the BTS is out of order._x000D_sync.
Baseband bus RP3/RP3-01 traffic might work incorrectly. The cell operation is degraded.
SW update needed.
The BTS operation is degraded because some of the BTS resources are not available.
The BTS operation is degraded because some of the BTS resources are not_x000D_
available.
The BTS operation is degraded because some of the BTS resources are not available.
The BTS operation is degraded because some of the BTS resources are not available.
The BTS operation is degraded, because some of the BTS resources are not available.
Depending on the reported alarms, the BTS capacity might have decreased (BASE STATION OPERATION DEGRADED) or the
Depending on the reported severity, the BTS capacity might have decreased (BASE STATION OPERATION DEGRADED), or th
If the reported alarm is 7652 BASE STATION NOTIFICATION, the BTS is using the lower level synchronization source as a refe
The BTS capacity may have decreased.
If the reported alarm is 7651 BASE STATION OPERATION DEGRADED, the BTS has no valid synchronization sources as a re
The new lasts
situation installed
for aorlong
failed HWthe
time, resources
accuracyare not available
starts before
to drift slowly. the BTSit has
However, been
might takereset.
several weeks before the BTS/RAN oper
Because of TX failure MIMO (Multiple Input Multiple Output) functionality is not operational or degraded for the cell related to th
Cells remain down.
The fault has no direct impact on the operation (BASE STATION NOTIFICATION).
The BTS does not function correctly. Some BB processing resources in the BTS are out of use.
The BTS resources decreased or the BTS is faulty.
The BTS operation is degraded (FSP) or the BTS is not operational (FCM/all FSPs).
Depending on the reported alarm, the fault situation might have no impact on the operation (BASE STATION or CELL NOTIFIC
FAULTY).
The BTS is not commissioned.
The BTS capacity might decrease or there might be interference in calls (commissioning data).
BTS fault
This startup
canisprevent
interrupted
BTSandfromthe BTS is outwhen
functioning of order (RNW
the RF data).is needed
Module
for the required cell configuration.
The signal path is unusable. The cells using the faulty unit might not work.
STATION FAULTY
7652 BASE STATION NOTIFICATION 7651 BASE STATION OPERATION
7652 BASE STATION NOTIFICATION DEGRADED
7653 CELL FAULTY
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION DEGRADED7652
7650 BASE BASE STATION NOTIFICATION7653 CELL FAULTY
76
STATION FAULTY
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION
7650 BASE STATION FAULTY DEGRADED
7652
7651 BASE
BASE STATION
STATION NOTIFICATION
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION
7650
7653 BASE
CELL STATION OPERATION
DEGRADED7653
FAULTY CELL FAULTY
DEGRADED
FAULTY
7653
7651 CELL FAULTY
7654 BASE
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION
7650 CELL
BASE STATION
STATION OPERATION
DEGRADED7653
OPERATION CELL DEGRADED
FAULTY
7654
DEGRADED
FAULTY CELL OPERATION DEGRADED
7653
7651 CELL
BASE FAULTY
STATION OPERATION DEGRADED
7652 BASE STATION NOTIFICATION 7652 BASE STATION NOTIFICATION
7653 CELL FAULTY
7652 BASE STATION NOTIFICATION 7652
7654 BASE STATION NOTIFICATION
CELL OPERATION DEGRADED
7652 BASE STATION NOTIFICATION 7652 BASE STATION NOTIFICATION
7652 BASE STATION NOTIFICATION7655 CELL NOTIFICATION
7652 BASE STATION NOTIFICATION
7651 BASE STATION OPERATION DEGRADED7654 CELL7655
7651 CELL
BASE NOTIFICATION
OPERATION DEGRADED7655
STATION CELL NOTIFICATION
OPERATION DEGRADED
7654
7652 BASE STATION NOTIFICATION7653 CELL FAULTY
7654 CELL
7652 CELL
BASE OPERATION
OPERATION DEGRADED
DEGRADED
STATION NOTIFICATION
7655
7653 CELL NOTIFICATION
7653 CELL FAULTY
7653 CELL
CELL FAULTY
FAULTY
7654 CELL OPERATION DEGRADED
7650 BASE STATION FAULTY
7650 BASE STATION FAULTY
7652 BASE STATION NOTIFICATION 7652 BASE STATION NOTIFICATION
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION DEGRADED7653
7650 BASE CELL FAULTY
STATION FAULTY
7651
7650 BASE STATION FAULTY
7651 BASE STATION OPERATIONBASE STATION
DEGRADED7652
7650 BASE OPERATION
BASE STATION
STATION FAULTY DEGRADED
NOTIFICATION7653 CELL FAULTY
76
7653
7651 CELL
BASE FAULTY
STATION OPERATION DEGRADED
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION DEGRADED7652
7650 BASE BASE STATION NOTIFICATION7653 CELL FAULTY
76
STATION FAULTY
7652 BASE STATION NOTIFICATION
7651 BASE STATION OPERATION DEGRADED7654 CELL7651
7651
7653
BASE
OPERATION
BASE
CELL
STATION
STATION OPERATION DEGRADED
OPERATION
DEGRADED
FAULTY DEGRADED
7652
7654 BASE
CELL STATION NOTIFICATION
OPERATION DEGRADED
7651 BASE STATION OPERATION DEGRADED7654 CELL7651OPERATION
7654 CELL
BASE DEGRADED
OPERATION
STATION
7653 CELL FAULTY DEGRADED
OPERATION DEGRADED
7654
7651 BASE STATION OPERATION DEGRADED7654 CELL7651
7654 CELL
OPERATIONOPERATION
DEGRADED
CELL OPERATION
BASE STATION DEGRADED
DEGRADED
OPERATION DEGRADED
7654
7651 BASE STATION OPERATION DEGRADED7654 CELL7651 CELL
OPERATIONOPERATION
DEGRADED
BASE STATION DEGRADED
OPERATION DEGRADED
7651 BASE STATION OPERATION DEGRADED7654 CELL7654 CELL
OPERATIONOPERATION
DEGRADED DEGRADED
7651 BASE STATION OPERATION DEGRADED
7654
7650 BASE STATION FAULTY
7651 BASE STATION OPERATIONCELL OPERATION
DEGRADED7653
7650 BASE DEGRADED
CELL
STATION FAULTY FAULTY
7651
7650 BASE
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION STATION
STATION OPERATION
DEGRADED7653
BASE CELL FAULTY
DEGRADED
FAULTY
7653
7651 CELL FAULTY
7650 BASE
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION STATION
STATION OPERATION
DEGRADED7653
BASE CELL FAULTY
DEGRADED
FAULTY
7653
7651 CELL
BASE FAULTY
STATION OPERATION DEGRADED
7653 CELL FAULTY
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION DEGRADED7652
7650 BASE BASE STATION NOTIFICATION7655 CELL NOTIFICA
STATION FAULTY
7651
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION BASE STATION
DEGRADED7652
7650 BASE OPERATION DEGRADED
BASE STATION
STATION FAULTY NOTIFICATION7653 CELL FAULTY
76
7652
7651 BASE
BASE STATION
STATION NOTIFICATION
OPERATION DEGRADED
7653 CELL FAULTY
7653
7655 CELL FAULTY
7652 CELL
BASE NOTIFICATION
STATION NOTIFICATION
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION
7650 DEGRADED7652
7653 BASE
CELL BASE STATION NOTIFICATION7653 CELL FAULTY
76
STATION FAULTY
FAULTY
7651
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION BASE
7654 BASE
7650 CELL STATION
DEGRADED7652
OPERATION OPERATION
BASE DEGRADED
STATION
DEGRADED
STATION FAULTY NOTIFICATION7653 CELL FAULTY
76
7652
7651 BASE
BASE STATION
STATION NOTIFICATION
OPERATION DEGRADED
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION
7650
7653 DEGRADED7652
BASE
CELL BASE STATION NOTIFICATION
STATION FAULTY
FAULTY
7652
7651 BASE
BASE STATION
STATION NOTIFICATION
OPERATION DEGRADED
7650 BASE STATION FAULTY
7654
7650
7653 CELL
BASE OPERATION DEGRADED
STATION FAULTY
7652 CELL
BASE FAULTY
STATION NOTIFICATION
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION
7654 DEGRADED
7650 CELL
BASE OPERATION DEGRADED
STATION FAULTY
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION
7650 BASE STATION FAULTY DEGRADED
7651 BASE STATION OPERATION DEGRADED 7651 BASE STATION OPERATION DEGRADED
7650 BASE STATION FAULTY
7650 BASE STATION FAULTY
7654 CELL OPERATION DEGRADED 7654 CELL OPERATION DEGRADED
7654 CELL OPERATION DEGRADED 7654 CELL OPERATION DEGRADED
7652 BASE STATION NOTIFICATION7653 CELL FAULTY
7654
7652 CELL
BASE OPERATION DEGRADED
STATION NOTIFICATION
7653 CELL
7650 BASE STATION FAULTY
7652 BASE STATION NOTIFICATION7653 FAULTY
CELL FAULTY
7654
7650 BASE STATION FAULTY CELL OPERATION DEGRADED7655 CELL N
7654
7652 CELL OPERATION DEGRADED
7652 BASE STATION NOTIFICATION7654 CELL OPERATION7652 BASE STATION NOTIFICATION
BASE STATION
DEGRADED7655 CELL NOTIFICATION
NOTIFICATION
7653
7654 CELL
CELL FAULTY
OPERATION DEGRADED
7652 BASE STATION NOTIFICATION7653 CELL FAULTY
7654
7652
7654 CELL
BASE
CELL OPERATION DEGRADED
STATION NOTIFICATION
OPERATION DEGRADED
7655
7653 CELL
CELL NOTIFICATION
FAULTY
7652 BASE STATION NOTIFICATION7653 CELL FAULTY
7654
7655 CELL
7652 CELLOPERATION
BASE DEGRADED
NOTIFICATION
STATION NOTIFICATION
7654
7653 CELL
CELL OPERATION
FAULTY DEGRADED
7652 BASE STATION NOTIFICATION7653 CELL FAULTY
7654
7652 CELL
BASE OPERATION DEGRADED
STATION NOTIFICATION
7654
7653 CELL
CELL OPERATION DEGRADED
7652 BASE STATION NOTIFICATION7654 CELL OPERATION BASE FAULTY
7652DEGRADED
STATION NOTIFICATION
7654
7654 CELL
CELL OPERATION DEGRADED
7652 BASE STATION NOTIFICATION7654 CELL OPERATION BASE OPERATION
7652DEGRADED DEGRADED
STATION NOTIFICATION
7652 BASE STATION NOTIFICATION7654 CELL OPERATION7654 CELL
BASE OPERATION
7652DEGRADED DEGRADED
STATION NOTIFICATION
7652 BASE STATION NOTIFICATION7654 CELL OPERATION7654 CELL
BASE OPERATION
7652DEGRADED DEGRADED
STATION NOTIFICATION
7652 BASE STATION NOTIFICATION7654 CELL OPERATION7654DEGRADED
7652 CELL OPERATION
BASE DEGRADED
STATION NOTIFICATION
7652 BASE STATION NOTIFICATION7654 CELL OPERATION7654 CELL OPERATION
7652DEGRADED DEGRADED
BASE STATION NOTIFICATION
7652 BASE STATION NOTIFICATION7654 CELL OPERATION7654 CELL
BASE OPERATION
7652DEGRADED DEGRADED
STATION NOTIFICATION
7654
7650 BASE STATION FAULTY
7653 CELL FAULTY
7654 CELL CELL
BASE OPERATION
OPERATION
7650 DEGRADED
STATION DEGRADED
FAULTY
7650 BASE STATION FAULTY
7653
7650 CELL
BASE FAULTY
STATION FAULTY
7654 CELL OPERATION DEGRADED
7652 BASE STATION NOTIFICATION 7652 BASE STATION NOTIFICATION
7653 CELL FAULTY
7653 CELL FAULTY
7652 BASE STATION NOTIFICATION7654 CELL OPERATION7652DEGRADED
BASE STATION NOTIFICATION
7652 BASE STATION NOTIFICATION7654 CELL OPERATION7654DEGRADED
7652 CELL OPERATION
BASE DEGRADED
STATION NOTIFICATION
7654
7652 BASE STATION NOTIFICATION7655 CELL NOTIFICATION CELL OPERATION DEGRADED
7652 BASE STATION NOTIFICATION
7655
7652 CELL
7652 BASE STATION NOTIFICATION7655 CELL NOTIFICATION BASE NOTIFICATION
STATION NOTIFICATION
7655
7652 BASE STATION NOTIFICATION7655 CELL NOTIFICATION CELL NOTIFICATION
7652 BASE STATION NOTIFICATION
7655 BASE
7652 BASE STATION NOTIFICATION7655 CELL NOTIFICATION
7652 CELL NOTIFICATION
STATION NOTIFICATION
7655 CELL NOTIFICATION
7651 BASE STATION OPERATION DEGRADED 7651 BASE STATION OPERATION DEGRADED
7651 BASE STATION OPERATION DEGRADED 7651 BASE STATION OPERATION DEGRADED
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION DEGRADED7652
7650 BASE BASE STATION NOTIFICATION
STATION FAULTY
7651 BASE STATION OPERATION DEGRADED7652 BASE 7651 BASE
STATION
7651 STATION
STATION OPERATION DEGRADED
OPERATION
BASENOTIFICATION DEGRADED
7652
7652 BASE
BASE STATION
STATION NOTIFICATION
NOTIFICATION
7650 BASE STATION FAULTY
7652 BASE STATION NOTIFICATION7653 CELL FAULTY
7654
7650 BASE STATION FAULTY CELL OPERATION DEGRADED
7652 BASE STATION
7650 BASE STATION FAULTY
7652 BASE STATION NOTIFICATION7653 NOTIFICATION
CELL FAULTY
7654
7650 BASE STATION FAULTY CELL OPERATION DEGRADED
7653
7652 CELL
BASE FAULTY
STATION
7652 BASE STATION NOTIFICATION7654 CELL OPERATION
7652
7654 CELL STATION NOTIFICATION
DEGRADED
BASE OPERATIONNOTIFICATION
DEGRADED
7653
7654 CELL
CELL FAULTY
OPERATION DEGRADED
7652 BASE STATION NOTIFICATION7653 CELL FAULTY
7654
7652 CELL
BASEOPERATION
STATION DEGRADED
NOTIFICATION
7654 CELL OPERATION DEGRADED
7653
7652 BASE STATION NOTIFICATION7653 CELL FAULTY
7654 CELL
7652 CELL
BASE FAULTY
OPERATION DEGRADED
STATION NOTIFICATION
7654
7653 CELL
CELL OPERATION
FAULTY DEGRADED
7652 BASE STATION NOTIFICATION7653 CELL FAULTY
7654
7652 CELL
BASEOPERATION DEGRADED
STATION NOTIFICATION
7654
7653 CELL OPERATION DEGRADED
7654 CELL OPERATION DEGRADED 7654 CELL
CELL FAULTY
OPERATION DEGRADED
7654 CELL OPERATION DEGRADED
7650 BASE STATION FAULTY
7652 BASE STATION NOTIFICATION7653 CELL FAULTY
7654
7650 BASE STATION FAULTY CELL OPERATION DEGRADED
7652
7652 BASE STATION NOTIFICATION
7652 BASE STATION NOTIFICATION7654 CELL OPERATION BASE STATION
DEGRADED NOTIFICATION
7653 CELL FAULTY
7653 CELL FAULTY
7654 CELL OPERATION DEGRADED 7654
7653 CELL
CELL OPERATION
FAULTY DEGRADED
7654 CELL OPERATION DEGRADED
7654
7650 CELL
BASE OPERATION
7650 BASE STATION FAULTY
7652 BASE STATION NOTIFICATION7653 DEGRADED
CELL FAULTY
7654
STATION FAULTY CELL OPERATION DEGRADED
7652 BASE STATION
7650 BASE STATION FAULTY
7652 BASE STATION NOTIFICATION7653 NOTIFICATION
CELL FAULTY
7654
7650 BASE STATION FAULTY CELL OPERATION DEGRADED
7653
7652 CELL
BASE FAULTY
STATION
7650
7654 BASE
CELL STATION NOTIFICATION
7650 BASE STATION FAULTY
7652 BASE STATION NOTIFICATION7653 CELL FAULTY
7654
OPERATIONFAULTY CELL OPERATION DEGRADED
DEGRADED
7653
7652 CELL
BASE FAULTY
STATION NOTIFICATION
7652 BASE STATION NOTIFICATION7654 CELL OPERATION
7652
7654 DEGRADED
BASE
CELL STATION NOTIFICATION
OPERATION DEGRADED
7653
7654 CELL
CELL FAULTY
OPERATION DEGRADED
7652 BASE STATION NOTIFICATION7654 CELL OPERATION
7652 DEGRADED
BASE STATION NOTIFICATION
7654 CELL OPERATION DEGRADED
7654
7652 BASE STATION NOTIFICATION7653 CELL FAULTY
7654 CELL
7652 CELL
BASE OPERATION
OPERATION DEGRADED CELL NOTIFICATION
DEGRADED7655
STATION NOTIFICATION
7653
7652 BASE STATION NOTIFICATION7653 CELL FAULTY
7654 CELL
7652 CELL
BASE FAULTY
OPERATION DEGRADED
STATION NOTIFICATION
7654
7653 CELL
CELL OPERATION
FAULTY DEGRADED
7652 BASE STATION NOTIFICATION7654 CELL OPERATION
7652
7655 DEGRADED
BASE
CELL STATION NOTIFICATION
NOTIFICATION
7654
7654 CELL OPERATION DEGRADED
7650 CELL
BASE OPERATION
7650 BASE STATION FAULTY
7652 BASE STATION NOTIFICATION7653 DEGRADED
CELL FAULTY
7654
STATION FAULTY CELL OPERATION DEGRADED
7652 BASE STATION
7650 BASE STATION FAULTY
7652 BASE STATION NOTIFICATION7653 NOTIFICATION
CELL FAULTY
7654
7650 BASE STATION FAULTY CELL OPERATION DEGRADED
7653
7652 CELL
BASE FAULTY
STATION
7652 BASE STATION NOTIFICATION7654 CELL OPERATION
7652
7654 CELL STATION NOTIFICATION
DEGRADED
BASE OPERATIONNOTIFICATION
DEGRADED
7653
7654 CELL
CELL FAULTY
OPERATION DEGRADED
7652 BASE STATION NOTIFICATION7654 CELL OPERATION
7652 DEGRADED
BASE STATION NOTIFICATION
7654 CELL OPERATION DEGRADED
7654
7652 BASE STATION NOTIFICATION7653 CELL FAULTY
7654 CELL
7652 CELL
BASE OPERATION
OPERATION DEGRADED
DEGRADED
STATION NOTIFICATION
7652 BASE STATION NOTIFICATION 7653
7652 CELL
BASE FAULTY
STATION NOTIFICATION
7654 CELL OPERATION DEGRADED
7652 BASE STATION NOTIFICATION 7652 BASE STATION NOTIFICATION
7652 BASE STATION NOTIFICATION 7652 BASE STATION NOTIFICATION
7652 BASE STATION NOTIFICATION 7652 BASE STATION NOTIFICATION
7652 BASE STATION NOTIFICATION7655 CELL NOTIFICATION
7652 BASE STATION NOTIFICATION
7655 CELL
7652 BASE STATION NOTIFICATION7653 CELL FAULTY
7654
7652 CELLOPERATION
BASE NOTIFICATION
DEGRADED
STATION NOTIFICATION
7653
7652 BASE STATION NOTIFICATION7653 CELL FAULTY
7654 CELL
7652 CELL
BASE FAULTY
OPERATION DEGRADED
STATION NOTIFICATION
7654
7653 CELL
CELL OPERATION
FAULTY DEGRADED
7652 BASE STATION NOTIFICATION7654 CELL OPERATION
7652DEGRADED
BASE STATION NOTIFICATION
7654
7654 CELL OPERATION DEGRADED
7652 BASE STATION NOTIFICATION 7652 CELL
BASE OPERATION DEGRADED
STATION NOTIFICATION
7652 BASE STATION NOTIFICATION7653 CELL FAULTY
7654
7652 CELL
BASEOPERATION DEGRADED
STATION NOTIFICATION
7652 BASE STATION NOTIFICATION 7653 CELL FAULTY
7652 BASE STATION NOTIFICATION
7654 CELL OPERATION DEGRADED
7652 BASE STATION NOTIFICATION7653 CELL FAULTY
7654
7652 CELL
BASEOPERATION DEGRADED
STATION NOTIFICATION
7653
7652 BASE STATION NOTIFICATION7653 CELL FAULTY
7654 CELL
7652 CELL
BASE FAULTY
OPERATION DEGRADED
STATION NOTIFICATION
7654 CELL
7653 CELL OPERATION
CELLOPERATION
FAULTY DEGRADED
7652 BASE STATION NOTIFICATION7653 CELL FAULTY
7654
7652 BASE DEGRADED
STATION NOTIFICATION
7654
7653 CELL
CELL OPERATION DEGRADED
7652 BASE STATION NOTIFICATION7654 CELL OPERATION BASE FAULTY
7652DEGRADED
STATION NOTIFICATION
7654
7654 CELL
CELL OPERATION
OPERATION DEGRADED
DEGRADED
7652 BASE STATION NOTIFICATION7653 CELL FAULTY
7654
7652 CELL
BASEOPERATION DEGRADED
STATION NOTIFICATION
7653
7652 BASE STATION NOTIFICATION7654 CELL OPERATION CELL
BASE FAULTY
7652DEGRADED
STATION NOTIFICATION
7654 CELL
CELL OPERATION
7654DEGRADED
OPERATION DEGRADED
DEGRADED
7652 BASE STATION NOTIFICATION7654 CELL OPERATION
7652 BASE STATION NOTIFICATION
7654 CELL OPERATION DEGRADED
7652 BASE STATION NOTIFICATION7654 CELL OPERATION
7652DEGRADED
BASE STATION NOTIFICATION
7654
7652 CELL
7652 BASE STATION NOTIFICATION7655 CELL NOTIFICATION BASE OPERATION DEGRADED
STATION NOTIFICATION
7650 BASE STATION FAULTY
7655
7650 CELL
BASE NOTIFICATION
STATION FAULTY
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION DEGRADED7653
7650 BASE CELL FAULTY
7654 CELL OPERATION DEGRADED
STATION FAULTY
7651
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION BASE STATION
DEGRADED7653 OPERATION
CELL FAULTY
DEGRADED
7650 BASE STATION FAULTY
7653
7651 CELL
BASE FAULTY
STATION OPERATION DEGRADED
7651 BASE STATION OPERATION DEGRADED7654 CELL7651OPERATION
7654 BASE
CELL DEGRADED
STATION
OPERATIONOPERATION
DEGRADED DEGRADED
7653
7654 CELL
CELL FAULTY
OPERATION DEGRADED
7650 BASE STATION FAULTY
7650 BASE STATION FAULTY
7650 BASE STATION FAULTY
7650 BASE STATION FAULTY
7652 BASE STATION NOTIFICATION7654 CELL OPERATION
7652DEGRADED
BASE STATION NOTIFICATION
7654
7650 CELL
BASE OPERATION
7650 BASE STATION FAULTY
7652 BASE STATION NOTIFICATION DEGRADED
STATION FAULTY
7652
7650 BASE
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION STATION
STATION NOTIFICATION
DEGRADED7653
BASE CELL FAULTY
7654 CELL OPERATION DEGRADED
FAULTY
7651
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION BASE STATION
DEGRADED7653
7650 BASE OPERATION DEGRADED
CELL FAULTY
7654
STATION FAULTY CELL OPERATION DEGRADED
7653 CELL FAULTY
7651 BASE STATION OPERATION DEGRADED7654 CELL7651
7651
7654
BASE
OPERATION STATION OPERATION
DEGRADED
BASE OPERATION
STATION OPERATION DEGRADED
DEGRADED
7653 CELL
CELL FAULTY DEGRADED
7651 BASE STATION OPERATION DEGRADED7654 CELL7654
7651 CELL
OPERATION
BASE OPERATION
DEGRADED
STATION DEGRADED
OPERATION
7654 CELL OPERATION DEGRADED DEGRADED
7654
7651 BASE STATION OPERATION DEGRADED7654 CELL7651 CELL
OPERATION OPERATION
DEGRADED
BASE STATION DEGRADED
OPERATION DEGRADED
7654
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION CELL OPERATION
DEGRADED7652
7650 BASE DEGRADED
BASE
STATION FAULTY STATION NOTIFICATION7653 CELL FAULTY
76
7651
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION BASE STATION OPERATION
7650 BASE STATION FAULTYSTATION
DEGRADED7652 BASE DEGRADED
NOTIFICATION7653 CELL FAULTY
76
7652
7651 BASE
BASE STATION
STATION NOTIFICATION
OPERATION DEGRADED
7652 BASE STATION NOTIFICATION7653 CELL FAULTY
7654
7652
7653 CELL
BASE
CELL OPERATION DEGRADED
STATION NOTIFICATION
FAULTY
7652
7653 BASE
CELL STATION NOTIFICATION
FAULTY
7652 BASE STATION NOTIFICATION 7654
7652
7653 CELL
BASE
CELL OPERATION DEGRADED
STATION NOTIFICATION
FAULTY
7654
7655 CELL
CELL OPERATION DEGRADED
NOTIFICATION
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION
7650 DEGRADED7652
7654 BASE
CELL OPERATION BASE STATION NOTIFICATION7653 CELL FAULTY
76
DEGRADED
STATION FAULTY
7655
7651
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION CELL
BASE NOTIFICATION
STATION OPERATION
7650 BASE STATION FAULTYSTATION
DEGRADED7652 BASE DEGRADED
NOTIFICATION
7652
7651 BASE
BASE STATION
STATION NOTIFICATION
OPERATION DEGRADED
7652 BASE STATION NOTIFICATION7653 CELL FAULTY
7652
7653 BASE
CELL STATION NOTIFICATION
FAULTY
7652
7653 BASE
CELL STATION NOTIFICATION
FAULTY
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION
7650 DEGRADED7652
7654 BASE
CELL OPERATION BASE STATION NOTIFICATION7653 CELL FAULTY
76
DEGRADED
STATION FAULTY
7655 CELL NOTIFICATION 7655
7651 CELL
BASE NOTIFICATION
STATION OPERATION
7655 CELL NOTIFICATION DEGRADED
7652 BASE STATION NOTIFICATION
7653 CELL FAULTY
7653 CELL
7653 CELL FAULTY
FAULTY
7651 BASE STATION OPERATION DEGRADED7652 BASE STATION
7654
7651 CELLNOTIFICATION
BASE OPERATION DEGRADED
STATION OPERATION DEGRADED
7652
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION BASE STATION
DEGRADED7653
7650 BASE NOTIFICATION
CELL FAULTY
STATION FAULTY
7651
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION BASE STATION
DEGRADED7653
7650 BASE OPERATION
CELL FAULTY
DEGRADED
STATION FAULTY
7653
7651 CELL FAULTY
7650 BASE
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION STATION
STATION OPERATION
DEGRADED7653
BASE CELL FAULTY
DEGRADED
FAULTY
7653
7651 CELL
BASE FAULTY
STATION OPERATION DEGRADED
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION DEGRADED7652
7650 BASE BASE STATION
STATION FAULTY NOTIFICATION7653 CELL FAULTY
76
7653
7651 CELL
BASE FAULTY
STATION OPERATION DEGRADED
7652 BASE STATION NOTIFICATION 7652 BASE STATION NOTIFICATION
7652 BASE STATION NOTIFICATION
7650 BASE STATION FAULTY
7652 BASE STATION NOTIFICATION
7650
7653 BASE STATION FAULTY
CELL FAULTY
7653 CELL FAULTY
7652
7653 BASE
7654 STATION NOTIFICATION
CELL OPERATION
FAULTY DEGRADED
7655
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION CELL NOTIFICATION
DEGRADED
7650 BASE STATION FAULTY
7656
7651 BASE
BASE STATION
STATION CONNECTIVITY LOST
7652 BASE STATION NOTIFICATION7653 CELL FAULTY
7654
7652 CELL
BASE STATION OPERATION
OPERATION DEGRADED DEGRADED
NOTIFICATION
7655 CELL NOTIFICATION 7653
7653 CELL
CELL FAULTY
FAULTY
7654
7655 CELL
CELL OPERATION DEGRADED
NOTIFICATION
7653 CELL FAULTY
7654 CELL OPERATION DEGRADED 7653 CELL FAULTY
7654
7652 BASE STATION NOTIFICATION7654 CELL OPERATION CELL
BASE OPERATION
7652DEGRADED DEGRADED
STATION NOTIFICATION
7654
7652 BASE STATION NOTIFICATION7654 CELL OPERATION CELL
BASE OPERATION
7652DEGRADED DEGRADED
STATION NOTIFICATION
7654
7650 CELL
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION OPERATION
DEGRADED7653
BASE DEGRADED
CELL
STATION FAULTY FAULTY
7651 CELL
7652 BASE STATION NOTIFICATION7653 CELL FAULTY
7654
7652 BASE
BASE STATION NOTIFICATION
OPERATION
STATION OPERATION
DEGRADED DEGRADED
7653
7653 CELL FAULTY
7652 BASE STATION NOTIFICATION 7652 CELL
BASE FAULTY
STATION NOTIFICATION
7654 CELL OPERATION DEGRADED
7653 CELL FAULTY
7654 CELL OPERATION DEGRADED 7653 CELL FAULTY
7654
7650 CELL
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION OPERATION
DEGRADED7653
BASE DEGRADED
CELL
STATION FAULTY FAULTY
STATION FAULTY
7651
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION BASE STATION
DEGRADED7653
7650 BASE OPERATION
CELL FAULTY
DEGRADED
STATION FAULTY
7653
7651 CELL FAULTY
7650 BASE
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION STATION
STATION OPERATION
DEGRADED7653
BASE CELL FAULTY
DEGRADED
FAULTY
7653
7651 CELL
BASE FAULTY
STATION OPERATION DEGRADED
7650 BASE STATION FAULTY
7650 BASE STATION FAULTY
7653 CELL FAULTY
7653 CELL FAULTY
7654 CELL OPERATION DEGRADED 7652
7653 BASE STATION NOTIFICATION
CELL FAULTY
7652 BASE STATION NOTIFICATION 7654
7652 CELL
BASE OPERATION DEGRADED
STATION NOTIFICATION
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION DEGRADED7653
7650 BASE CELL FAULTY
STATION FAULTY
7652 BASE STATION NOTIFICATION 7651 BASE STATION OPERATION
7652 BASE STATION NOTIFICATION DEGRADED
7653 CELL FAULTY
7650 BASE STATION FAULTY
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION DEGRADED7652 BASE STATION
7651 BASENOTIFICATION
STATION OPERATION DEGRADED
7652 BASE STATION NOTIFICATION 7652
7652 BASE STATION
BASE STATION NOTIFICATION
NOTIFICATION
7652 BASE STATION NOTIFICATION 7652 BASE STATION NOTIFICATION
7652 BASE STATION NOTIFICATION 7652 BASE STATION NOTIFICATION
7652 BASE STATION NOTIFICATION 7652 BASE STATION NOTIFICATION
7652 BASE STATION NOTIFICATION7654 CELL OPERATION
7652DEGRADED7655
BASE STATIONCELL NOTIFICATION
NOTIFICATION
7654
7652 BASE STATION NOTIFICATION7654 CELL OPERATION CELL OPERATION
7652DEGRADED DEGRADED
BASE STATION NOTIFICATION
7655
7654 CELL NOTIFICATION
7650 CELL
BASE OPERATION
7650 BASE STATION FAULTY
7652 BASE STATION NOTIFICATION DEGRADED
STATION FAULTY
7651 BASE STATION OPERATION DEGRADED 7652
7651 BASE
BASE STATION
STATION NOTIFICATION
OPERATION DEGRADED
7651 BASE STATION OPERATION DEGRADED7652 BASE STATION NOTIFICATION7653
7651 BASE STATION OPERATION CELL DEGRADED
FAULTY
7654 CELL OPERATION DEGRA
7652 BASE STATION NOTIFICATION 7652 BASE STATION NOTIFICATION
7652 BASE STATION NOTIFICATION
7653 CELL FAULTY
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION
7650 DEGRADED
7654 BASE
CELL STATION FAULTY
OPERATION DEGRADED
7651
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION BASE STATION
STATION OPERATION
DEGRADED7652
7650 BASE BASE STATION
FAULTY DEGRADED
NOTIFICATION
7655 CELL NOTIFICATION 7651 BASE STATION OPERATION
7652 BASE STATION NOTIFICATION DEGRADED
7652
7655 BASE NOTIFICATION
STATION NOTIFICATION
7654 CELL OPERATION DEGRADED 7654 CELL
CELL OPERATION DEGRADED
7657 BASE STATION CONNECTIVITY
DEGRADED 7657 BASE STATION CONNECTIVITY DEGRADED
7656 BASE STATION CONNECTIVITY
LOST7657 BASE STATION CONNECTIVITY
STATION FAULTY
7651
7650 BASE STATION FAULTY
7651 BASE STATION OPERATIONBASE STATION
DEGRADED7653
7650 BASE OPERATION
CELL FAULTY
DEGRADED
STATION FAULTY
7653
7651 CELL FAULTY
7650 BASE
7650 BASE STATION FAULTY
7651 BASE STATION OPERATION STATION
STATION OPERATION
DEGRADED7653
BASE CELL FAULTY
DEGRADED
FAULTY
7653
7651 CELL FAULTY
7665 BASE STATION TRANSMISSION ALARM 7665 BASE
BASE STATION OPERATION DEGRADED
STATION TRANSMISSION ALARM
7653 CELL FAULTY
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7665 BASE STATION TRANSMISSION ALARM 7665 BASE STATION TRANSMISSION ALARM
7653 CELL FAULTY
-
7650 BASE STATION FAULTY (the faulty FSP is not mapped
to any cell and all FSPs in the BTS are faulty)_x000D_
7651 BASE STATION OPERATION DEGRADED (the faulty
Flexi
FSP is BTS
notFDD, Flexi
mapped toBTS TDD:_x000D_
any cell and at least one other FSP is
7653 (cell cannot
operational)_x000D_ operate because of not enough available
and needed resources: Tx or Rx)_x000D_
7653 CELL FAULTY (the faulty FSP is mapped to the cell).
7654 (cell can still operate because it still has enough
available
Flexi BTSandFDD,needed resources:
Flexi BTS both Tx and Rx)_x000D_
TDD:_x000D_
_x000D_
7651 BASE STATION OPERATION
7650 BASE STATION FAULTY (1. FSM.2. DEGRADED
The faulty FBB is
Flexi
not mapped to any cell and all FSPs andTDD:_x000D_
Zone Micro
(FCM/FCT)_x000D_ FDD, Flexi Zone Micro FBBs in the BTS
7653
7654 FAULTY (otherDEGRADED
CELL OPERATION
are faulty)_x000D_ cell(s) can provide
(FR)_x000D_
service)_x000D_
7655
7651 CELL
BASE NOTIFICATION
STATION OPERATION (FR, if incompatible
DEGRADEDSW (theversion
faulty
7650
FBB is not mapped to any cell and at least one otherservice)
has BASE
been STATION
detected on FAULTY
a (no
unit)_x000D_ cell can provide FSP or
_x000D_
FBB is operational)_x000D_
Flexi
7653 Zone
CELLMicro FDD,
FAULTY Flexi
(the Zone
faulty FBB Micro TDD:_x000D_
is mapped to the
7655 CELL
cell)._x000D_ NOTIFICATION
#N/A
The estimated phase error in holdover has exceeded 5 us. #N/A
7656 BASE STATION CONNECTIVITY LOST(No other S1 7656 BASE STATION CONNECTIVITY LOST(No
interface
7656 BASE is operational.)_x000D_
STATION CONNECTIVITY LOST(No other S1 other S1 interface
7656 BASE is operational)_x000D_
STATION CONNECTIVITY LOST(No
_x000D_
interface is operational)_x000D_ _x000D_
other S1 interface is operational)_x000D_
7657
_x000D_BASE STATION CONNECTIVITY DEGRADED (An 7657 BASE STATION CONNECTIVITY
_x000D_
other S1 interface
7657 BASE is operational.)
STATION CONNECTIVITY DEGRADED (An DEGRADED (An otherCONNECTIVITY
7657 BASE STATION S1 interface is operational)
other S1 interface is operational) DEGRADED (An other S1 interface is operational)
- -
#N/A
LED Display
Stable green
Stable red (FBB) Stable red (FSM:7650,7653-all FSPs faulty) Blinking red (FSM:7651,7653-otherwise)
Stable green
Stable red (7650; 7653), blinking red (7651; 7653), alt. red and green (7653 and 7654 [MHA, TILT]), stable green (7652)
Stable red
Stable red (FBB) Stable red (FSM:7650,7653-all FSPs faulty) Blinking red (FSM:7651,7653-otherwise)
Stable red (7650, 7653), blinking red (7651, 7654)
Blinking yellow
Stable green
Stable green
Stable green
Blinking red (7651, 7654),Stable green (7655)
Stable yellow
Stable green
Stable green
Stable green
Stable red (FBB) Stable red (FSM:7650,7653-all FSPs faulty) Blinking red (FSM:7651,7653 -otherwise)
Stable red (7650), Blinking red (7651), N/A (7652, 7653, 7654)
Stable red (7650), Blinking red (7651), N/A (7652, 7653)
Blinking red
Blinking red
Blinking red
Blinking red
Blinking red
Stable red (FBB) Stable red (FSM:7650,7653-all FSPs faulty) Blinking red (FSM:7651,7653-otherwise)
Stable red (FBB) Stable red (FSM:7650,7653-all FSPs faulty) Blinking red (FSM:7651,7653-otherwise)
Stable red (FBB) Stable red (FSM:7650,7653-all FSPs faulty) Blinking red (FSM:7651,7653-otherwise).
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Stable red (7650), Blinking red (7651), Stable green (7652)
Stable red (7650; 7653; 7654), Blinking red (7651; 7653; 7654), Stable green(7652)
Stable green
Stable red (7650; 7653; 7654), blinking red (7651; 7653; 7654)
Optical port LED: stable red
Stable red (7650); Blinking red (7651), Stable Green (7652)
Stable red
Stable red (7650), Blinking red (7651)
Stable red
Blinking red
Stable red
Stable red (RF module faulty), Alternating red and green (RF module working, MHA faulty)
Stable red (RF module faulty), Alternating red and green (RF module working, MHA faulty)
Alternating red and green (RF working, Antenna Line faulty)(description only for RF module using RP1 protocol)
Stable red (all Antenna Lines of RF faulty); Blinking red (otherwise) (description only for RF using RP1 protocol)
Blinking red (description only for RF module using RP1 protocol)
Stable red (if all LNAs of the RF module are faulty); Blinking red (if some, but not all LNAs of the RF module are faulty)
Stable red (all DL and UL antenna-carriers activated on the FR are faulty); Blinking red (otherwise)
Stable red
Alternating red and green (RF module working, MHA faulty)
Alternating red and green (RF module working, MHA faulty)
Alternating red and green (RF module working, MHA faulty)
Alternating red and green (RF module working, MHA faulty)
Alternating red and green (RF module working, MHA faulty)
Stable Green (7652) Alternating Red and Green (7654)
N/A
Stable red
Stable red
Stable green
Stable green
Alternating red and green (RF working, MHA degraded)
Alternating red and green (RF working, MHA faulty)
Blinking red (Filter), Stable green (other)
Blinking red (Filter), Stable green (other)
Blinking red (Filter), Stable green (other)
Blinking red (Filter), Stable green (other)
Blinking red
Blinking red
Stable red; Blinking red; Stable green
Blinking red (7651), green (7652)
Stable red
Stable red
Blinking red
Stable red (7653), Blinking red (7654)(description only for RF module using RP1 protocol)
Stable red (all Antenna Lines of the RF module are faulty); Blinking red (not all Antenna Lines of the RF module are faulty)
Stable red (all Antenna Lines of the RF module are faulty); Blinking red (not all Antenna Lines of the RF module are faulty)
Blinking red
Stable red (all Antenna Lines of the RF module are faulty); Blinking red (not all Antenna Lines of the RF module are faulty)
Blinking red
Stable red (all Antenna Lines of the RF module are faulty); Blinking red (not all Antenna Lines of the RF module are faulty)
Blinking red (7654), Stable red (7653, 7650).
Stable red
RP1 RF only:Stable red-all activated antenna-carriers faulty; Blinking red- at least 1 activated ant.-carrier faulty or degraded
Blinking red
Blinking red
Stable red (7653)
Flexi BTS FDD&TDD:Blinking red (description only for RF module using RP1 protocol) Flexi Zone Micro FDD&TDD: Stable red
Blinking red
Stable red (description only for RF module using RP1 protocol)
Stable red (description only for RF module using RP1 protocol)
Blinking red
Blinking red
Stable red
Stable or blinking red (Fan)
FR module LED: Stable green (7652, Fan Group Degraded), Blinking red (7652, Fan Group Out of Order).
Stable/Blinking Yellow
Stable green
Stable green
RFM connected over OBSAI RP1 interface: Stable red; RRU connected over CPRI Ir interface:N/A
Blinking red (FR unit status: degraded), Stable Red (FR unit status: out of order)
Blinking red
Blinking red
Stable red (all activated carriers TX & RX of RF are faulty); Blinking red (not all activated carriers TX & RX of RF are faulty)
Stable green
Stable red (optical interfaces)
Stable red (optical interfaces)
Stable red (optical interfaces)
Blinking red(optical interfaces)
Stable red (optical interface)
Blinking red
Blinking red
Blinking red
Stable green
Stable red
Stable red (1.FBB, 2. Oprical Int. 3.FSM-7650,7653 all FSP faulty).Blinking red (FSM-7651,7653-otherwise)
Stable red (FBB) Stable red (FSM-7650,7653 all FSP faulty).Blinking red (FSM-7651,7653-otherwise)
Blinking red
Stable red
Stable red
Blinking red
Stable red (7650), Stable green (7652)
Stable red (1.Oprical Int. 2.FSM-7650,7653 all FSP faulty).Blinking red (FSM-7651,7653-otherwise)
Stable red (1.FBB, 2. Oprical Int. 3.FSM-7650,7653 all FSP faulty).Blinking red (FSM-7651,7653-otherwise)
Blinking Red (7651)
Blinking Red (7651)
Blinking Red (7651)
N/A
N/A
N/A
N/A
N/A
N/A
Stable green
Stable red (7650; 7653; 7654), blinking red (7651; 7653; 7654)
Stable green
Stable red
Stable green
Stable red (FBB) Stable red (FSM:7650,7653-all FSPs faulty) Blinking red (FSM:7651,7653-otherwise)
Stable red (FBB) Stable red (FSM:7650,7653-all FSPs faulty) Blinking red (FSM:7651,7653-otherwise)
Stable red (FBB) Stable red (FSM:7650,7653-all FSPs faulty) Blinking red (FSM:7651,7653-otherwise)
LED display should remain unchanged.
N/A
Stable red
FSM led: Blinking red
Stable red (7650), blinking red (7651)
Stable red
Stable green
Periodic red and green
Periodic red and green (RF working, Antenna Line degraded)
Alternating red and green
Stable red (FSM:7650,7653-all FSPs faulty) Blinking red (FSM:7651,7653-otherwise)
FSM Optif led: stable red.
Stable green (fan LED)
FSM Optif led: blinking red
Stable red (FBB) Stable red (FSM:7650,7653-all FSPs faulty) Blinking red (FSM:7651,7653-otherwise)
Stable Red(Fan Group Out Of Order), Stable Yellow(FAN Group Degraded)
Stable Yellow
Stable Yellow
Stable red (7650), Blinking red (7651, 7653)
Stable red (7650), Blinking red (7651, 7653)
Stable red (7650), Blinking red (7651, 7653)
Stable red (7650)
Stable green
Stable red (FBB) Stable red (FSM:7650,7653-all FSPs and FBBs faulty) Blinking red (FSM:7651,7653-otherwise)
N/A
Stable red
Stable green
Stable green
Stable green
Stable green
Stable green
Stable green
Stable green
Stable red (7650) Stable green (7652)
Blinking red
N/A
Stable green
Stable red (7650), Blinking red (7651)
Stable green (7652), Blinking red (7651), Stable red (7650)
Stable green
N/A
N/A
N/A
N/A
N/A
Stable red
Flexi BTS FDD, Flexi BTS TDD:N/A Flexi Zone Micro FDD, Flexi Zone Micro TDD:Stable red
Flexi BTS FDD, Flexi BTS TDD:N/AFlexi Zone Micro FDD, Flexi Zone Micro TDD:Stable red
Stable green
Stable red
N/A
Blinking red
Stable Green
Stable Green
Stable Green
Stable Green
Stable green
N/A
Stable green
Stable green
N/A
N/A
N/A
N/A
N/A
Stable green
Blinking red
Blinking red
Stable green
None
Stable green
Stable green
Stable red (FBB) Stable red (FSM:7650,7653-all FSPs faulty) Blinking red (FSM:7651,7653-otherwise)
Stable red (FBB) Stable red (FSM:7650,7653-all FSPs faulty) Blinking red (FSM:7651,7653-otherwise)
Stable red (FBB) Stable red (FSM:7650,7653-all FSPs faulty) Blinking red (FSM:7651,7653-otherwise)
Stable Green
Blinking Red
Stable red
Stable red
Stable red
Blinking red
Stable red
Blinking red
Stable Green
Blinking red
Blinking red
Blinking Red
Blinking red
Stable red
Blinking red
Blinking red
Blinking red
Blinking red
Stable red
Blinking red
Blinking red
Stable Green
Blinking red
Blinking red
Blinking red
Blinking Red
Blinking red
Blinking red
Blinking red
Blinking red
Blinking red
Stable Green
Flexi BTS FDD, Flexi BTS TDD:
Stable
Stable Green
Green
Stable Green
Flexi Zone Micro FDD, Flexi Zone Micro TDD:
Blinking red
Stable red
Blinking red
Stable Green
Blinking red
Stable green
Stable red (FBB) Stable red (FSM:7650,7653-all FSPs faulty) Blinking red (FSM:7651,7653-otherwise)
Stable green
Stable green
Stable red (FBB) Stable red (FSM:7650,7653-all FSPs and FBBs faulty) Blinking red (FSM:7651,7653-otherwise)
N/A
Stable red
Stable green
Stable green
Stable green
Stable green
Stable green
Stable green
Stable green
Stable red (7650) Stable green (7652)
Blinking red
N/A
Stable green
Stable red (7650), Blinking red (7651)
Stable green (7652), Blinking red (7651), Stable red (7650)
Stable green
N/A
N/A
N/A
N/A
N/A
Stable red
Flexi BTS FDD, Flexi BTS TDD:N/A Flexi Zone Micro FDD, Flexi Zone Micro TDD:Stable red
Flexi BTS FDD, Flexi BTS TDD:N/AFlexi Zone Micro FDD, Flexi Zone Micro TDD:Stable red
Stable green
Stable red
N/A
Blinking red
Stable Green
Stable Green
Stable Green
Stable Green
Stable green
N/A
Blinking yellow
Stable green
N/A
N/A
N/A
N/A
N/A
Stable green
Blinking red
Blinking red
Stable green
None
Stable green
Stable green
Stable red (FBB) Stable red (FSM:7650,7653-all FSPs faulty) Blinking red (FSM:7651,7653-otherwise)
Stable red (FBB) Stable red (FSM:7650,7653-all FSPs faulty) Blinking red (FSM:7651,7653-otherwise)
Stable red (FBB) Stable red (FSM:7650,7653-all FSPs faulty) Blinking red (FSM:7651,7653-otherwise)
Stable Green
Blinking Red
Stable red
Stable red
Stable red
Blinking red
Stable red
Blinking red
Stable Green
Blinking red
Blinking red
Blinking Red
Blinking red
Stable red
Blinking red
Blinking red
Blinking red
Blinking red
Stable red
Blinking red
Blinking red
Stable Green
Blinking red
Blinking red
Blinking red
Blinking Red
Blinking red
Blinking red
Blinking red
Blinking red
Blinking red
Stable Green
Flexi BTS FDD, Flexi BTS TDD:
Stable
Stable Green
Green
Stable Green
Flexi Zone Micro FDD, Flexi Zone Micro TDD:
Blinking red
Stable red
Blinking red
Stable Green
Blinking red
LED Display in release RL60
Stable green
Stable red ( 7650), Blinking Red ( 7651,7653)
Stable green
Stable red (7650; 7653), blinking red (7651; 7654), alt. red and green (7653 and 7654 [MHA, TILT]), stable green (7652)
Stable red (7650), blinking red (7651)
Stable red (FCM/FCT on MSM or all FSPs); Blinking red (not all FSPs)
Stable red (7650, 7653), blinking red (7651, 7654)
Stable red (7650, 7653), blinking red (7651, 7654)
Stable green
Stable green
Stable yellow
Stable green
Stable green
Stable red
Blinking red
Stable red
Blinking red
Stable red
Stable red (RF module faulty), Alternating red and green (RF module working, MHA faulty)
Stable red (RF module faulty), Alternating red and green (RF module working, MHA faulty)
Alternating red and green (RF working, Antenna Line faulty)
Stable red (all DL and UL antenna-carriers activated on the RF are faulty); Blinking red (otherwise)
Blinking red
Stable red (if all LNAs of the RF module are faulty); Blinking red (if not all LNAs of the RF module are faulty)
Stable red
Stable red
Stable green
Stable green
Blinking red
Stable red
Stable red
Blinking red
Stable red (7653), Blinking red (7654)
Stable red (all Antenna Lines of the RF module are faulty); Blinking red (not all Antenna Lines of the RF module are faulty)
Stable red (all Antenna Lines of the RF module are faulty); Blinking red (not all Antenna Lines of the RF module are faulty)
Blinking red
Stable red (all Antenna Lines of the RF module are faulty); Blinking red (not all Antenna Lines of the RF module are faulty)
Blinking red
Stable red (all Antenna Lines of the RF module are faulty); Blinking red (not all Antenna Lines of the RF module are faulty)
Blinking red (7654), Stable red (7653).
Stable red
Stable red (all activated antenna-carriers faulty); Blinking red (at least one activated antenna-carrier faulty or degraded )
Blinking red
Blinking red
Stable red (7653)
Blinking red
Blinking red
Stable red
Stable red
Blinking red
Blinking red
Stable red
Stable or blinking red (Fan)
FR module LED: Stable green (7652, Fan Group Degraded), Blinking red (7652, Fan Group Out of Order).
Stable/Blinking Yellow
None
Stable green
Stable red
Blinking red (FR unit status: degraded), Stable Red (FR unit status: out of order)
Blinking red
Blinking red
Stable red (all antenna lines of the RF module are faulty); Blinking red (not all antenna lines of the RF module are faulty)
N/A
Stable red (optical interfaces 1-5 leds)
Stable red (optical interfaces 1-5 leds)
Stable red (appropriate OptIF led 1-5)
Blinking red(optical interfaces)
Stable red (SFP led)
#N/A
Blinking red
Blinking red
Stable green
Stable red
Stable red
FSM LED: 7650:stable red, 7651:blinking red, plugin FSP LED: stable red if FSP faulty, blinking red if FSP degrade
Blinking red
Stable red
Stable red
N/A
Stable green
Source FSP, FR RP1 IF v.1.x: Stable red. Source FR RP1 IF v.2.x: N/A
Stable green
Stable green
Stable green
Stable red
Stable red (7650) , Blinking red (7651)
Stable red (7650), Blinking red (7651)
LED display should remain unchanged.
N/A
Stable red (7650), Stable green (7652)
Blinking red
Stable red
Stable green
Stable red
N/A
Stable red
Stable green
Stable green
Stable green
Stable green
Stable green
Stable green
STABLE GREEN
Stable red (7650) Stable green (7652)
#N/A
#N/A
Stable red (7650), Blinking red (7651)
#N/A
None
#N/A
N/A
N/A
N/A
N/A
Stable red
N/A
N/A
N/A
Stable red
N/A
N/A
Stable Green
#N/A
#N/A
#N/A
Stable green
N/A
#N/A
#N/A
N/A
N/A
N/A
N/A
N/A
Stable green
Blinking red
Blinking red
Stable green
None
Stable green
Stable green
#N/A
#N/A
#N/A
Stable Green
Blinking Red
Stable red
Stable red
Stable red
Blinking red
Stable red
Blinking red
Stable Green
Blinking red
Blinking red
Blinking Red
Blinking red
Stable red
Blinking red
Blinking red
Blinking red
Blinking red
Stable red
Blinking red
Blinking red
Stable Green
Blinking red
Blinking red
Blinking red
Blinking Red
Blinking red
Blinking red
Blinking red
Blinking red
Blinking red
Stable Green
Stable Green
Stable Green
Stable Green
Stable red
Blinking red
Stable Green
#N/A
Instructions
Check the active fan alarms and the air flow of the BTS.
1. Download the BTS SW again._x000D_
2.
There Reset are(block/unblock)
several possibilities the BTS._x000D_
for the alarm activation. Therefore, a BTS Clock Frequency History feature has been developed.
3.
history If step 2
feature,does not
see help,
the replace
online help the alarming
of BTS Site module._x000D_
Manager).
1. Make sure that the module is properly
_x000D_ connected. If the Depending
module LEDondoes the possible reason,
not light up, follow the
the module instructions
is faulty. Checkbelow:_x00
the modul
_x000D_
2. Check the fault history._x000D_
1.
1. Block/unblock the BTS._x000D_
In case of a fault in the transmission network synchronization, you must correct the network synchronization. The long-term a
_x000D_
2. Perform a power-off reset. that_x000D_
_x000D_
1. Block/unblock the module is causing the alarm._x000D_
3. If
If steps
the 1
basic and 2 do
accuracy not of help,
the replace
Iub signal the module but
is alarm.
correct, thatthere
is causing
istotoo the
muchalarm.
instability,
2. Replace the
Update the BTS with compatible SWmodule that is causing the
(check the SW versions see the active SW that is, the
version, jitter
and or wander
update is outside
the active the acc
SW version),
needed._x000D_
Update compatible SW to the BTS (check the SW versions to see the active SW version, and update the active SW version), un
_x000D_
3. Check
1. In casethe of aNTP BTSsetting._x000D_
equipment fault, the location might be:_x000D_
_x000D_
1.Retry the file update a few times._x000D_
Transport
2.
2.Check Checkthe part:_x000D_
the stratum
FTP accountparameter on the NTP server._x000D_
user settings._x000D_
1.
_x000D_ Retry the SW update._x000D_
3.Check thesnapshot
file and path names._x000D_
-2.
3.
Flexi
4.Check
Save
First,
Check
BTS the
checkthat
theFDD, the alarms
a GNSS
Flexi
administration
and
is of
BTS check
the
log TRS
configured
TDD:_x000D_the with
on the
download
and BTS status
Site
fileconnected.
server.
from the
Manager
_x000D_ andBTS act SWDLreport in the snapshot file.
accordingly._x000D_
-_x000D_
1. If there
Retry are
the no
SW alarms,
update._x000D_
Unblock the module with BTS Site Manager. check the TRS synchronization settings._x000D_
_x000D_
2. If other flash memory-related faults are currently active for the module that is causing the alarm, replace this module._x000D
To
FCM
_x000D_ cancel the fault, unblock the cell.
unit:_x000D_
_x000D_
Flexi
To cancel Zonethe Micro FDD,
fault, unblockFlexithe Zone BTS.Micro TDD:_x000D_
Unblocking the BTS causes a BTS reset.
-1. If the
Retry TDM
the reference
SW signal
update._x000D_ accuracy
Check the fault history and other active faults of the unit._x000D_ and the TRS are in order but the FCM unit is still alarming, run the fast tuning with BTS S
-_x000D_
2. IfIfthe alarm
other flash is still active after the
memory-related fastare
faults tuning is finished,
currently active reset
for the the site.replace
BTS, If the problem
the BTS. does not disappear in a few minutes, res
1. IfBlock/unblock
-Note: thatThis
does not the alarming
help, replace unit/module._x000D_
the FCM unit._x000D_
2. fault doesthe
Remove/reinsert notalarming
require any (special) actions.
unit/module._x000D_
_x000D_
Flexi BTS FDD, Flexi BTS TDD:_x000D_
3.
Note Replace
thatthe if the
the alarming
reason is unit/module.
in the transmission
Replace
1. Upgrade alarming
the systemunit/module._x000D_
module SW._x000D_network synchronization, replacing the faulty unit does not solve the problem. Furth
network,
_x000D_
2. not to a fault in the unit._x000D_
1. Replace
Check
_x000D_
Flexi Zonethe
the
Micro
unit._x000D_
otherFDD,active alarms.
Flexi ZoneIfMicro the ROM disk is corrupted, change the alarming module._x000D_
TDD:_x000D_
_x000D_
_x000D_
4. After
Replace
1. Check the thefault
the BTS. situation
other active has alarms.been If cleared,
the ROMyou diskmight need to tune
is corrupted, changethetheBTS master module._x000D_
alarming clock because the BTS master clock adjus
2. Block/unblock the alarming module. There are no recovery actions, therefore block/unblock can be tried once. If that does no
_x000D_
1. Check the other active alarms. If the ROM disk is corrupted, change the alarming module._x000D_
-_x000D_
2. manually
Block/unblock by changing
the alarmingthe DAC word (during
module. There are a site
no visit)_x000D_
recovery actions, therefore block/unblock can be tried once. If that does no
1.
-2.orCheck
with the tuning,
fast other active
in whichalarms.
the If themaster
BTS ROM disk clock isiscorrupted, achange
tuned in actions, the alarming
few minutes module._x000D_
automatically nearcan
thebeIub reference
once. If(normal tunin
Block/unblock the alarming module. There are no recovery
_x000D_ therefore block/unblock tried that does no
Note, however, that you should only use the fast tuning in case
1. Check the other active alarms. If the ROM disk is corrupted, change the alarming module._x000D_ the Iub reference signal is known to be a good one. Otherwise,
2. Block/unblock
_x000D_ the alarming module. There are no recovery actions, therefore block/unblock can be tried once. If that does no
1. Block/unblock the FSM._x000D_
Background
2. Block/unblock information:
the alarming The principle
module. is that in
There arethenomobile
recoverynetwork,
actions, thetherefore
synchronization goes from
block/unblock can be thetried
S1 interface. However,
once. If that does noin
2. If that
Note! does not
Perform the help,
steps replace
belowthe inthe
thefaulty
listed module.
order until the fault disappears._x000D_
operator. This does not harm system if the synchronization of the leased line service provider is also accurate or stable eno
_x000D_
Flexi BTS FDD, Flexi BTS TDD:_x000D_
Flexi
1. BTS FDD,
Restart Flexi BTS TDD:_x000D_
the BTS._x000D_
[User
1. defined]
2. Reset the System
If that does not help, Module._x000D_
replace the alarming module.In the case that FSP is alarming object, replace FSM because the alarm is
2. Replace
[User
_x000D_ defined] the System Module or FBBx module (according to fault source)._x000D_
_x000D_
Flexi Zone
[User defined] Micro FDD, Flexi Zone Micro TDD:_x000D_
Flexi
1. Zone Micro
Replace the FlexiFDD, ZoneFlexi Zone
Micro Micro TDD:_x000D_
BTS.
[User defined]
1. Replace the Flexi Zone Micro BTS.
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
Note: Perform the following steps in the listed order until the fault disappears:_x000D_
_x000D_
1. Make sure that the unit/module is properly connected. If the unit/module LED does not light up, the unit/module is faulty. Che
1. Use BTS Site Manager to perform a full commissioning to the BTS using the NetAct backup upload SCF file as template._x0
_x000D_
Flexi
2. BTS FDD, Flexi
Download BTSsoftware
TDD:_x000D_
2. Check the two
_x000D_ faultdifferent
history._x000D_ packages so that the faulty file is removed from the BTS._x000D_
3. Download the software
Flexi BTS FDD, Flexi BTS TDD:_x000D_
_x000D_ again._x000D_
Flexi
_x000D_
1. Zone Micro
Replace FDD, Flexi
the alarming Zone Micro TDD: _x000D_
module._x000D_
Flexi
Check BTS
the FDD, Flexi BTS
frequencies' TDD:_x000D_
parameters against the BTS HW configuration. Check whether the connected radio supports the carrier
4. Replace
_x000D_
Perform the the SysteminModule.
recovery theTDD:_x000D_
following sequence:_x000D_
HW
Flexi
Flexi that
BTS might
FDD,
Zoneif Micro have
Flexi
FDD, limitations
BTSFlexi Zonethe in the
Microsupported
TDD:_x000D_ frequency range and bandwidth.
1.
1. Check
Check if the
the cable
signal connecting
is being recieved system module and radio module or the cable connecting the extension baseband module
1. Download
Replace
2. Replace thethe thecable._x000D_
correct
alarming Module._x000D_ reference clock source._x000D_
configuration._x000D_
System from the
2.
2. Check
Reset the BTS._x000D_
FTM status._x000D_
_x000D_
3.
Flexi
3. CheckBTSthe
Change thesynchronization
FDD,
the faulty
Fleximodule (FBBx
BTS TDD:_x000D_settings or of FR)._x000D_
the FTM unit._x000D_
3.
4. Replace
If
Note! this does
Perform the BTS._x000D_
not
the help,
steps replace
below FCM/FCT
in the listed (system
order untilmodule)._x000D_
the fault disappears._x000D_
_x000D_
1. Block/unblock the System Module._x000D_
_x000D_
1. Check
Flexi the
Zone Micro other alarms
FDD,site Flexi of the
Zone BTS
Micro and FTM and act accordingly._x000D_
_x000D_
Commission
Flexi
2. If Zone
there are the
Microno BTS
FDD,
other FlexiwithZonecorrect
Micro
synchronization-related IP TDD:_x000D_
addresses.
TDD:_x000D_alarms active, start the fast tuning with BTS Site Manager._x000D_
1. Replace
2. Check the thebackhaul
System connection.
Module.
Replace
3.
1. Resetuntil
Wait the theBTS.
site.the
Run fast tuning
module again._x000D_
is automatically heated to the required start-up temperature._x000D_
4.
1. Check
Check the
_x000D_ the reference
antenna cables signaland accuracy
connectors by measuring
toward the it with
MHA.a frequency counter
Fix or replace the (note:
brokenrequires a good timebase for the counte
parts. _x000D_
tuning._x000D_
2. If the fault has been active for more than two hours, check the environmental conditions of the site.
_x000D_
1.
5. Check
If the antenna
that does not help, cables
replace and theconnectors
system toward the MHA. Fix or replace the broken parts. _x000D_
module._x000D_
2. Restart
_x000D_ the MHA by blocking and unblocking the Flexi Radio (FR) Module._x000D_
_x000D_
1. Check
NOTE! theoperation
This antenna line affectsandall antenna
antenna line devices.
lines and Fix related
cells or replace theFR
to the faulty parts/devices._x000D_
Module, not just the faulty one. If the alarm reappears
2.
2. Restart
Flexi
The Zone
alarm the
Micro
isMHA FDD,by blocking
cancelled FlexionlyZoneatand
RF unblocking
Micro
Module TDD:_x000D_
resettheorFlexi
BTS Radio
reset. (FR) Module. _x000D_
Flexi
NOTE! BTSThis FDD, Flexi
operation BTS
affectsTDD:_x000D_
all antenna
This
1. fault is most likelycables,
the result of a BTSlines and cells
hardware related
problem or to the FR Module,
aline
reference source not just
that the faulty
is being one. Ifbythe
followed thealarm
BTS reappears
that is in a
1. Check
1. Check the
Identify the
the
antenna
antenna
currently cables,
selected
connectors,
connectors,
synchronization
antenna,
antenna, and
and antenna
reference antenna
source line
of
devices
devices
the BTS
that
that
with
can
might
the
interfere
cause
active
with RF signal._x000D_
interference
1818 fault. If it with
is a the RF signal._
transport-based
2. Check
_x000D_ the antenna line (TX-cable-antenna) impedance matching._x000D_
alarms
Replace
_x000D_ orthe
faults associated
alarming Radiowith Module.the respective time servers (If there is a fault associated with a network-based time server, it is
2. Check the antenna
IEEE1588-2008 master line (TX-cable-antenna)
clock impedance matching.
Flexi
Replace Zone theMicro
alarmingFDD,Radio Zone ifMicro
and the 1818
Flexi Module/MultiRadio fault
TDD:_x000D_ subsequently
Combiner. clears._x000D_
2.
1. If the
CheckatheBTS uses its
connection GPS reference source while the 1818 fault or ifand
the antenna.
1818 fault_x000D_
persists for more than two hours after corre
Perform Radio Module and resetintegrity of antenna
(block/unblock). connectors,
If this does notcable,
help, replace the alarming Radio Module.
2. Reset the BTS device. If the alarm persists, replace the BTS.
Perform RET calibration. If that does not help, replace the RET unit._x000D_
In case of
Perform RET1845: send valid
calibration. configuration
If that does not help, file toreplace
the alarming
the RET device.
unit._x000D_
In case of 1845: send valid configuration file
Perform RET calibration. If that does not help, replace the RET unit._x000D_ to the alarming device.
In case of
Perform RET1845: send valid
calibration. configuration
If that does not help, file toreplace
the alarming
the RET device.
unit._x000D_
In case of
Perform RET1845: send valid
calibration. configuration
If that does not help, file toreplace
the alarming
the RET device.
unit._x000D_
In case of 1845: send valid configuration file to the alarming
1. Block/unblock the radio module to give a power-off reset to the antenna line devices._x000D_ device.
If
1.that
Uploaddoesthe notcorrect
help, replace
SW to the thedevice
antenna (if line device.
possible) or Note:
perform if the
an fault
ALD source is RX/TX,
power reset replace the
(for example radio
by RF module.
blocking/unblocking)._x0
2. If thatthe
Update does SWnot to help,
the BTS. replace the antenna line device.
Check that the WCDMA master system module is connected to the system module when the SCF parameter "syncMaster" = "F
1. Check whether the heating element exists at all._x000D_
2.
"NotCheck
enough the radio
heaterresources
control connection and thatdisplayed
for cell detected." the heaterinisthe working._x000D_
alarm additional info:_x000D_
3. Replace
_x000D_ the alarming component.
Reset the MHA (by Radio Module block/unblock). If this does not help, replace the alarming module.
The cell might not be set up because not enough radio resources are detected._x000D_
Reset
Check MHA (by Radio
if all cables andModule block/unblock).
SFPs connecting In case
the radio this wont
modules help
to the - replace
system module the alarming
(or to the module._x000D_
extension baseband module - FBBx
Alternatively,
1. recommission
Check the functionality of the
the BTSantennawith line fewer cells._x000D_
device._x000D_
_x000D_
1. Check the functionality of the antenna line device._x000D_
"Not
2. enough
Check
_x000D_ the DSP resources
compatibility for cellthe
between detected."
antennadisplayedline device in and
the alarm additional info:_x000D_
the BTS._x000D_
1.
If Check thebaseband
extension
_x000D_ functionality moduleof the(FBBx)
antenna is line device._x000D_
used:_x000D_
2. Check the compatibility between the antenna line device and the BTS._x000D_
_x000D_
1.Ensure
3.
1. Check the
_x000D_ all cables
thatfunctionality
the (Power
of the and
given parameters Baseband
are
antenna inline bus range.
cables) have been connected _x000D_
thedevice._x000D_
valid
2.
to Check
the
_x000D_ FBBx theunit._x000D_
compatibility between the antenna line device and the BTS._x000D_
3. Check that the given parameters are in the valid range.
_x000D_
Block and
2. Check the unblock
compatibility the system
between module._x000D_
the antenna line device and the BTS._x000D_
3.
3. Check that the
If this does
_x000D_ not given parameters
help, replace are inunit._x000D_
the FBBx the valid range.
_x000D_
3. Check that the given parameters are in the valid range.
If extension baseband module (FBBx) is not used:_x000D_
1.Block and unblock the system module._x000D_
1. Check the other active faults._x000D_
2.
1. Replace
Check the the alarming
other activemodule._x000D_
faults._x000D_
_x000D_
2. Replace the alarming module._x000D_
Flexi BTS FDD, Flexi BTS TDD:_x000D_
_x000D_
1. Check the GPS receiver installation._x000D_
Note! Perform the steps below in the listed order until the alarm disappears._x000D_
2. Check
_x000D_ the GPS receiver status._x000D_
Flexi
3. CheckBTSthe FDD, Flexi BTS
connection TDD:_x000D_
between
1.
1. Check
Confirm the cabling
if the current (connected
applied tothe SyncGPS
configuration In receiver and FSM._x000D_
interface)._x000D_
is within the configured RF HW capabilities._x000D_
_x000D_
Flexi
_x000D_ BTS FDD, Flexi BTS TDD:_x000D_
2.
1. Check
Flexi Zone
Verify BTS Micro connections
FDD, Flexi and
Zone commissioning
Micro theTDD:_x000D_ settings._x000D_the file if it is missing. Reset the FR module._x000D_
2. Check
Flexi
3. BTSififFDD,
Block/unblock
the
theHWP1 2.048
Flexi
the
file
MHz
BTS isreference
BTS._x000D_
present
TDD:_x000D_ insource FRismodule.
workingDownload normally and the 2.048 MHz signal is available._x000D_
1.
2.
1. Check
If
_x000D_ the file
Check the
that isGPS
present,
TEMP receiver
and CALI installation._x000D_
block/unblock files arethepresent
RF HWand unit._x000D_
upload missing file(s). Reset the RFbased
Module._x000D_
4.
2.
3. If HW
Instructions
Check
If the configuration
the
problem are
GPS divided
receiver
continues isinto
confirmed
threestep
status._x000D_
after as2correct,
sections.has been thisperformed,
Execute problem
the steps is caused
from the
replace bysection
the eNB
FR HW SW.
chosenCheck
unit._x000D_otheronactive
the bestalarms._x000D_
knowledge and comm
3.
2. Replace
If
_x000D_ the files the are alarming
present: module.
block/unblock FR HW unit._x000D_
_x000D_
Instructions
3. If the problem are divided
is into threeafter sections. 1Execute
replacesteps from section chosen based on best knowledge and common sense t
Flexi
Section
Flexi
_x000D_ Zone
Zone A: Micro
Check
Micro onstill
FDD,
FDD, theobserved
Flexi
system
Flexi Zone
Zone Micro
module step
Micro TDD:_x000D_
side:_x000D_
TDD:_x000D_
FR HW unit._x000D_
_x000D_
1. Confirm
Replace if existing
Flexi applied configuration is within the configured RF_x000D_
1.
1. Check
Section
Flexi
HW Zone A:if Check
Block/unblock the connector
Micro
capabilities._x000D_ on Zone
the
FDD, BTS._x000D_
system
Flexi
Micro
seal is BTS.
module
Zone
properly
Micro
mounted and firmly in place.
side:_x000D_
TDD:_x000D_
_x000D_
2.
2.
1. Check
Instructions
Replace
Check if
ifBTS the
are Small
divided
theconnections
Flexi
connector Form
Zone into
seal Micro Factor
three
isand Pluggable
sections.
BTS. mounted and
properly (SFP)
Execute is properly
steps from
firmly in place. _x000D_connected/mounted
section chosen based in the System
on best Module. and
knowledge If SFP connection/mo
common sense t
1.
2.
3. Block/unblock
Check
Check
_x000D_ if the LEDBTS._x000D_
indicates the commissioning
faulty SFP settings._x000D_
(connected to System Module). Replace the SFP if it is faulty._x000D_
2.
2.
3. Check
Flexi BTSifFDD,
Replace
Block/unblock the
the SFP Flexi
Flexi
the (Small
BTS Micro
Zone
BTS._x000D_ Form BTS.
TDD:_x000D_ Factor Pluggable) is properly connected/mounted in the System Module. If SFP connection/mo
4.
3.
1. Check
Section
Check A:ifif Check
Block/unblock the
the optical
LEDthe RFcable
onindicates
system HW is properly
module
the faulty
unit._x000D_ connected/mounted
side:_x000D_
SFP (connected to Systemin the SFP._x000D_
Module). Replace the SFP if it is faulty._x000D_
4.
1. If
Flexi
5. HW
Clean
CheckBTStheconfiguration
ififFDD,
connector is
Flexiconnectors
optical BTS
seal confirmed
TDD:_x000D_
is that
properly then
are this problem
connected
mounted and to is
the
firmly caused
SFP.
in in place. by eNB_x000D_
Reset the RF
_x000D_ RF HW HW unit._x000D_
unit by using block/unblock procedures and ch
4.
2.
SW.
1. Check
If the
Checkproblem
Block/unblock the
other optical
continues
active
RF HW cablealarms. is
after properly
unit._x000D_ step 1 connected/mounted
has been performed, the
replace SFP._x000D_
the
_x000D_
2.
1.
5. Check if
Block/unblock
Clean
_x000D_ the
the optical SFPRF (Small
HW
connectors Form
unit._x000D_ Factor
thatstep are1, Pluggable)
connected is
to HWproperly
SFP.unit._x000D_ connected/mounted
Reset RF HW unit by block/unblock in the System Module. Ifand
procedures SFPcheckconnection/mo
if this sol
2. If
Section
3.
_x000D_ problem
Check B:if Check
the is LED
stillonobserved
the
indicates radio after
module
the faulty SFP replace
side:_x000D_
(connectedRF to System Module). Replace the SFP if it is faulty._x000D_
_x000D_
Flexi
1. Zone
Block/unblock
_x000D_ Micro FDD,
the RF Flexi
HW Zone Micro
unit._x000D_ TDD:_x000D_
1.
4.
2. Check
If
Section
1. Check
_x000D_ B:ifthe
problem connector
the
Checkis optical
stillon
connection seal
cable
observed
radio andis isproperly
properly
after
module
integrity step mounted
of1,
side:_x000D_
thereplace
antennaandRF
connected/mounted firmly
HW in
connector,unit.place._x000D_
in the SFP._x000D_
cable, and antenna._x000D_
Flexi
2. CheckZone
BTS if Micro
FDD,
the FDD,
Flexi
Small BTS
FormFlexi Zone
TDD:_x000D_
Factor Micro
Pluggable TDD:_x000D_
(SFP) is properly connected/mounted inthat
the isRF module.
5.
1.
2. Clean
Check
If there
problem
Check
the
if are optical
connector
more
continues connectors
than seal two
after is RF
step that
properlyunits
1 are
has connected
mounted
within
been the and
BTS,
performed,to SFP.
firmly in Reset
block/unblock
replace place._x000D_RF
the HWRF
the
RF HW unit
HW byunit
unit.block/unblock causing theIf alarm._x000D_
procedures SFPand connection/mounti
check if this sol
1.
3.
2.
3. Check
_x000D_
Flexi
Check
ResetBTSthe ifthe
Block/unblock
if the
FDD,
the
configuration.
BTS SFP
the RF
optical
Flexi cable
BTS
(Small
device.
HW
If
_x000D_
isunit._x000D_
properly
TDD:_x000D_
Form
the Factor
alarm connected/mounted
Pluggable)
persists, replace is properly
the BTS.in the SFP._x000D_ in the RF module. If SFP connection/mounti
connected/mounted
2.
4. Reset
If the B:
Clean BTS.
problem
the _x000D_
opticalcontinues
onconnectors after step
at the 1RFhas been performed,
module end. Resetinreplace the the RF unitHW unit._x000D_
Section
1.
3.
1.
3. if Check
Block/unblock
Check
Block/unblock
If
_x000D_ that does the not
the
optical
RF help,
radio
RF
HW cable HW
replace
module
isunit._x000D_
properly
unit._x000D_ the
side:_x000D_
Flexi connected/mounted
Zone Micro BTS._x000D_ theRF HW
SFP._x000D_ by using block/unblock procedures and check if th
_x000D_
1.
2.
4. Check
If the
Clean
_x000D_ if
problem connector
theMicro opticalcontinues seal
connectors is properly
after step
at RF 1mounted
has
module been and firmly
peformed, in place._x000D_
replace the RF HW unit._x000D_
end. Reset RF HW unit by block/unblock procedures and check if this solves the
Flexi
1.
2. CheckZone
Block/unblock
Section C:if Check
the SFP FDD,
thethe RF Flexi
HW
optical
(Small Zone
Form Micro
unit._x000D_
connection:_x000D_
Factor TDD:_x000D_
Pluggable) is HW
properly
_x000D_
_x000D_
2.
1. If problem
Replace
_x000D_ is still
the optical
BTS. observed after step 1, replace RF unit. connected/mounted in the RF module. If SFP connection/mounti
1.
3.
In Check
Flexi
Section Zone
startup: if the
Micro
Wait FDD,
until thecables
cable
Flexi
alarm isare
Zoneis not
properlyMicro
canceled.overly bent.
connected/mounted
TDD:_x000D_
This If
might they takeare, upinreplace
the30
to the optical cables since overly bending the optical fiber ca
SFP._x000D_
minutes._x000D_
2.
2. If the C:
OPTIONAL: problemCheckstill
Test
of optical
thepersists
fiber
connection:_x000D_
after
cable step
(for 1, replace
example, the
measure RF HW the unit.
optical attenuation)
4.
1.
1. Clean
Replace
_x000D_
Check the
if the optical
optical BTS.
Flexi BTS FDD, Flexi BTS TDD:_x000D_ connectors
cables are not at RF
over module
bend. If end.
yes, Reset
replace RF the HW unit
optical by
cable sincefrom
block/unblock overthe System
procedures
bending theModule
and
optical end.
check
fiberif Check
this the
solves
cables mea
the
damage
3. OPTIONAL:
_x000D_
If
2.
1. the alarm
OPTIONAL:
Block/unblock is Test
not
Test the fiber
canceled:_x000D_
thethe RF fiber
HW cable
cable
unit._x000D_(for example, measure the optical attenuation)
(for example, measure the optical attenuation) from System Module end. Check measuring e from the RF Module end. Check the measurin
Flexi
_x000D_
Section
check BTS
if C: FDD,
Check
environment Flexi
ofthe BTS
optical
temperatureTDD:_x000D_
connection:_x000D_
is within design limits for radio module._x000D_
3.
2.
1. OPTIONAL:
If the problem
Block/unblock Test
still
RF fiber
persists
HW cable
after
unit._x000D_ (for
step example
1 has beenmeasure
performed, the optical
replace attenuation)
the RF HWfrom RF Module end. Check measuring equip
unit._x000D_
If
1. the
WhenCheck
Flexi
_x000D_ alarm if
environment
BTS still
optical
FDD, persists
Flexicables
temperature
BTS after
are executing
not
TDD:_x000D_ isover
out ofthe
bend. steps
limits If yes
thenfrom
then
alarmsections
replace
is A,
expectedthe B,optical
and
andC,no replace
cable since
further the RF bending
over
actions module._x000D_
are needed. the optical fiber cables dam
2.
1. If
_x000D_
2. problem is Test
OPTIONAL:
Block/unblock still
the observed
theRF fiber
HW after step
cable
unit._x000D_(for 1, replacemeasure
example, RF HW unit._x000D_
the optical attenuation) from System Module end. Check measuring e
If alarm
Flexi
_x000D_ Zone
BTS is still
Micro
FDD, observed
FDD,BTS
Flexi after
Flexi executing
Zone
TDD:_x000D_ Microsteps TDD:_x000D_from sections: A,B,C replace the RF module._x000D_
3.
2.
1. OPTIONAL:
If the problem Test the
persists fiber
after cable
step (for
1 hasexample,
been measure
performed, the
replaceoptical the attenuation)
RF HW from RF
unit._x000D_ Module end. Check measuring equip
1. Check
Flexi
Check
_x000D_ Zonethe
Instructions if Micro
the configuration
are divided
FDD, Flexi
ambient intoand three
Zone
temperature download
sections.
Micro updated
Execute
TDD:_x000D_
is within design configuration
the
limits stepsfor the from if radio
required._x000D_
the module.
section chosen
When the based on best
ambient knowledge
temperature isand
out common
of limits, t
2.
1. Block/unblock
_x000D_
Block/unblock
_x000D_ the
the BTS._x000D_
BTS._x000D_
If
3. alarm
Flexi
1. Zone is still
Block/unblock
Replace
Section A: Micro
the
Check observed
FDD,
RF
BTS. on HW
the after
Flexi executing
Zone
unit._x000D_
system Microsteps
module TDD:_x000D_from sections: A,B,C replace the RF module._x000D_
side:_x000D_
2.
1. If that
Check
Replace
_x000D_ does
if air
the not
flow
BTS. help,
is notreplace
blocked the byBTS.some objects or walls. Remove any objects that are blocking air flow and mount the modul
1.
No Check
actionifisthe
_x000D_ connector seal is properly mounted and firmly in place. _x000D_
needed.
2.
2. If problem
Check if the is Small
still observed after Pluggable
step 1, replace RF is HW unit. connected/mounted in the System Module. If the SFP's connecti
3. Check if the
1. fan or Form
excessive sunlight
air flow Factor
isisblocked
causingby any (SFP)
overheating. object. properly
Install
Remove sunshield
any objects following mounting
that might instructions
be blocking the fanandor recommendations.
air flow._x000D_
3.
2. Check
Check ifif the
the LED
fan indicates is
connector theproperly
faulty SFP mounted.(connected Mount tothe Systemfan Module).properly._x000D_
connector Replace the SFP if it is faulty._x000D_
1.
4. Check
Check ifif the fan
thecontinues,
optical or air cable flowisisproperly
blockedconnected/mounted
by any object. Remove in the any objects that might be blocking the fan or air flow._x000D_
SFP._x000D_
3.
2. If the alarm
Check ifif the fan connector resetisthe radio mounted.
properly module byMount using the block/unblock._x000D_
fan connector
5.
1.
4. Clean
Check
If alarm the the optical
continues,fan or connectors
air
replaceflow is
the that
blocked
fan are connected
by
module. any object.to the SFP.
Remove Reset
any the RFproperly._x000D_
objects_x000D_ HW unit by using block/unblock procedures and ch
3. If
_x000D_
that the
might alarm be continues,
blocking the reset
fan orthe air radio module
flow._x000D_ by using block/unblock._x000D_
1.
4. Check
If the B: if thecontinues,
alarm fan or air flow replaceis blocked
the fan by any object. Remove any objects that might be blocking the fan or air flow._x000D_
module.
Section
2.
2. Check
Check ifif Check
the
the fan
fan on the radio
connector
connector is
is module
properly
properly side:_x000D_
mounted.
mounted. Mount the the fan connector_x000D_
1.
1. Check
Check
properly._x000D_ifif the
the environmental
connector seal temperature
is properly is withinMount
mounted the design
and firmly
fan
in limitsconnector
of the radio
place._x000D_
properly._x000D_
module. If the environmental temperature is be
3. If
_x000D_ the alarm continues, reset the radio module by using block/unblock._x000D_
2.
3.
1.
4. If the
Check
If alarm
if
the alarm the Small
continues,
environmental
continues, Form Factor
reset
replace the Pluggable
temperatureradio
the fan module
is
module. (SFP)
withinby is
the properly
using design connected/mounted
block/unblock._x000D_
limits of the radio in the IfRF
module. themodule.
environmentalIf SFP connection/mounti
temperature is ou
2.
3.
4. Check
Check
If
_x000D_ the ifif the
alarm the air flowcable
optical
continues, is not is
replaceblocked
properly
the byconnected/mounted
fan any
module.object or walls. in Remove
the any_x000D_
SFP._x000D_
1. Check
objects if the environmental temperature is within the designaccording limits of the radio module. If the environmental temperature is ou
4.
2. Cleanthat
Check
_x000D_ the
if the might
optical beconnectors
air flow blocking
is not blocked air atflow
theby and
FR any mount
objectthe
module end.ormodule
ResetRemove
walls. the FR HW tounit
instructions
any_x000D_ by using and recommendations._x000D_
block/unblock procedures and check if th
_x000D_
Instructions
_x000D_
objects that are
might divided
be into three
blocking air sections.
flow and Execute
mount the steps
module from the section_x000D_
according to instructions and recommendations._x000D_
2.
3. Check
Checkbased if air flow is not blocked by any object or walls. toRemove any_x000D_
chosen
Section
_x000D_
Instructions
objects C:if Check
that
excessive
are
might
on best
the
divided
be
sunlight
knowledge
optical
into three
blocking
is causing
and
connection:_x000D_
air sections.
flow and
overheating.
common Execute
mount
sense
the
Install
steps
module
minimize
from sunshield,
thethe
according
following
cost
section_x000D_ mounting instructions and recommendations.
and_x000D_
to instructions and recommendations._x000D_
time
1. effort. _x000D_
the optical cables are not overly bent. If they are, replace the optical cable,
3. Check
chosen
_x000D_
1. The VSWR
_x000D_
if excessive
based measured sunlight
on best knowledge is
at the RFand causing overheating.
common exceeds
(transmitter) Install
sense to values minimize sunshield,_x000D_
that the arecost and_x000D_
acceptable by since
the RF overly
module. bending_x000D_the optical fiber cab
2. OPTIONAL:
following
time
3.
2. Checkeffort.mounting
ifthe_x000D_ Test
excessive the fiber
instructions
sunlight cable and
isand (for
causing example,
recommendations.
the overheating. measure Install the optical
sunshield,_x000D_ attenuation) from the System Module end. Check the mea
Section
1.
3. Check
OPTIONAL:
_x000D_ A:the Checkimpedance
BTS Test on thesystem
connections matching
fiber module
cable
of
(for
Antenna Line
side:_x000D_
commisionning
example, measure
System
settings._x000D_
the
(replace elements that cause mismatch)._x000D_
optical attenuation) from the FR Module end. Check the measurin
following
3.
1.
2. To
Checkcheck mounting
ifthat
Block/unblock if the
the connector
the instructions
above-mentioned
BTS seal
(using isand recommendations.
thesteps
properlylocal have
mounted
BTS Site solved and
Managerthe problem,
isproperly
firmly block/unblock
inconnected
connection place. if_x000D_
a remote the RF module._x000D_
connection is not possible).
_x000D_
Section
1. Check
_x000D_ A: Check the on
Small system Form module
Factor side:_x000D_
Pluggable (SFP) is in the System Module._x000D_
2.
If Check
the alarm ifif the small
continues form-factor
after is pluggable (SFP) isand properly connected/mounted_x000D_
1.
1.
in
Check
_x000D_
Note:
Check
the Forcing
systemthat the theconnector
the
module. RF HW
Small If Form
thetoexecuting
seal work
Factor
SFP's
properly
under steps
such
Pluggable from
mounted
connection/mounting
sections
conditions
(SFP) isisis A, B,
firmly
might
properly
not
and
result
correct,
C,inreplace
inconnected
place. _x000D_
permanentin the
the FR
readjust_x000D_
module._x000D_
damage
System to the RF HW.
Module._x000D_
_x000D_
2. Check
Replace
_x000D_ if the small
SFP form-factor
module. pluggable (SFP) is properly connected/mounted_x000D_
the
1.
Flexi
in theconnection/mounting._x000D_
CheckZone
systemthe Microstatus FDD, of the
IfFlexi module
Zone Micro behind the faulty link (power
TDD:_x000D_ is not correct, readjust_x000D_ on, and so on)._x000D_
2.
3. Replace themodule.
SFP module. the SFP's connection/mounting
theCheck
_x000D_
1. Replace
Reset if the
the the RFLED
BTS.
connection/mounting._x000D_
Module indicates behind that thethe SFPoptical
faulty is faulty (connected
interface to system module)._x000D_
by blocking/unblocking it._x000D_
Replace
2.
3. Check
Check
_x000D_ the
the
if theSFP
Small
LED if it
Formis faulty._x000D_
indicates Factor that Pluggable
the SFP (SFP)
is faulty from both
(connected ends to (the
system System Module and the module behind the faulty link). Th
module)._x000D_
1.
4. Exchange
Check if the the alarming
optical and working links, and check where the SFP._x000D_
alarm is reported now._x000D_
_x000D_
Replace
2. the
If that does
_x000D_ SFPnot it iscable
ifclear is properly
faulty._x000D_
the fault situation, connected/mounted
replace the RF Module in the that causes the alarm._x000D_
5.
3.
1.
4. Clean the
Exchange optical
connectors,
the alarmingconnectors test
andisthe that
fiber
working arecable,
connected
links, to thewhere
replace
and check itSFP. Reset
ifinit the
is
the the is
faulty._x000D_
alarm RF HW_x000D_
reported now._x000D_
2. Check
_x000D_
unitIf by
_x000D_
if the
theblock/unblock
alarming optical cable
link remains
procedures
properly
the same,
and
connected/mounted
checkreplace thisthe
ifand System
solves the Module._x000D_
SFP._x000D_
problem._x000D_
5.
3.
1. Clean
Reset
Exchange
_x000D_ the optical
System
the alarmingconnectors
Module._x000D_
and that
working are connected
links, to
check the SFP.
where Reset
the alarm the isRF HW_x000D_
reported now._x000D_
_x000D_
4.
2.
unitIf by
_x000D_ previous steps
theblock/unblock
alarming link remains do not the
procedures help, replace
same,
and check the
replaceif module
thisthe System
solves behind
the the faulty link.
Module._x000D_
problem._x000D_
3. If the B:
Section
_x000D_ alarming
CheckModule link
on radio changes, module replace the module behind that link.
side:_x000D_
_x000D_
4.
2. System
If the alarming link remainsis the onlysame,
the source causing
replace thethe alarm,Module._x000D_
System or if the actions mentioned above do not clear the fault situation,
1.
3. Check
If
Section
_x000D_ the B: if Check
alarmingthe connector
link
on radio changes, seal
moduleisreplace
properly themounted
side:_x000D_ module and behind is firmly
that link. in place._x000D_
2.
3. Check
1. If
Check if the small
if the connector
the alarming form-factor
link changes, seal isreplacepluggable
properly (SFP)
themounted
module and is properly
behind is firmly connected/mounted_x000D_
that link. in place._x000D_
in
2. the
Check RF ifmodule.the small If the SFP's connection/mounting
form-factor pluggable (SFP) is properly is not correct, readjust the_x000D_
connected/mounted_x000D_
connection/mounting._x000D_
in the RF module. If the SFP's connection/mounting is not correct, readjust the_x000D_
1. Exchange the alarming and working links, and check where the alarm is reported now._x000D_
_x000D_
Check the alarms for the connected module.
2. If the alarming link remains the same, replace the System Module._x000D_
1. Check the cables between the System Module and the RF Module._x000D_
_x000D_
_x000D_
3. Check
1. If the alarming
the cables linkbetween
changes,the replace
System theModule
moduleand behind
the RF thatModule,
link. the cable between the FBBx Module and the RF Module,
2. Reset the alarming System Module._x000D_
_x000D_
1. Check the cables between the System Module and the RF Module, and the cable between the FBBx Module and the RF Mo
_x000D_
2. Replace the unit that causes the alarm (System Module or FBBx).
_x000D_
3. Reset
Check thethe site._x000D_
antenna mapping to the local cells in the commissioning file.
2. Reset the System Module._x000D_
_x000D_
1. Check the RP3-01 cable between the synchronization master and synchronization_x000D_
_x000D_
4. Replace
slave system themodules._x000D_
alarming System Module.
3. Check
1. Replace the the alarming
RP3-01 cable module
between (System Module).
the synchronization master and synchronization_x000D_
2. Check
slave system the alarms
modules._x000D_ in the synchronization master system module and act accordingly._x000D_
1. Reset
3. Check the the status of the module behind themodule._x000D_
faulty link (power on, and so on)._x000D_
2. Check the synchronization
_x000D_ alarms in the synchronization master system master system module and act accordingly._x000D_
1.
3. Switch
Reset to the recently active BTS configuration._x000D_
2. Check the
_x000D_ the synchronization
alarming fiber connection. master system module._x000D_
If OptIf is the source:_x000D_
2. Retry the SW update.
_x000D_
If OptIf is the source:_x000D_
1. Check antenna mapping to the local cells in the commissioning file._x000D_
_x000D_
1. Check
2. Block/unblock the between
BTS._x000D_
1. Check the
_x000D_ antennacables mapping to the the System
local cells Module
in theand RF Module or
commissioning the cable between the FBB module and the RF Module (it
file._x000D_
3.
1.
2. Perform
Block/unblock
Check theblock/unblock
cables the BTS.
between on the
_x000D_ RF
the System Module._x000D_
Modulerelated and RF
2.
4. Check
Perform
_x000D_ loga for
BTS line code
reset. violation
_x000D_ (LCV) errors to Module or the_x000D_
optical links. cable between the FBB module and the RF Module (it
3.
1. Perform
Block/unblock
_x000D_ block/unblock
the BTS. on the
_x000D_ RF Module._x000D_
5.
2.
4. Replace
Check
Perform theathe RF module
configuration.
BTS behind the optical link._x000D_
_x000D_
3. Verify
Note:
_x000D_ SFP
Perform the reset.
(small steps _x000D_
form-factor
below inpluggablethe listedtransceiver)
order until the andBTS fiberfault
conditions.
disappears._x000D_
5.
2. Replace
Check
_x000D_ the the RF module
baseband busbehind
configurationthe optical relatedlink._x000D_
to RP3 link speeds.
If FSP
Note:
_x000D_ is the source:_x000D_
Perform the steps below in the listed order until the BTS fault indication disappears._x000D_
Flexi BTSthe
Perform FDD, Flexi BTSBTS TDD:_x000D_
1.
If
1.
Check
FSP
Note:
Reset thea System
is the
Perform System
other
source:_x000D_
the steps Module
active below
Module._x000D_
reset._x000D_
faults
in the and listed actorder
accordingly._x000D_
until the BTS fault disappears._x000D_
2.
1. If
Makethat
Perform
_x000D_ does
sure a not
that
System help,
the replace
plug-in
Module type the System
baseband
reset._x000D_ Module.
unit is installed correctly._x000D_
2.
3. Replace
Note:
Reset Perform
the the System
the
alarming steps Module._x000D_
below inunit._x000D_
baseband the listed order until the BTS fault disappears._x000D_
2. If that
Flexi
_x000D_ BTSdoes FDD, not Flexihelp, BTS replace the System Module._x000D_
TDD:_x000D_
4. Replace
Note:
_x000D_
1. Perform
Block/unblock the thealarmingsteps baseband
below in the unit.
listed order until the BTS fault disappears._x000D_
Flexi
1. Check
_x000D_ Zoneif Microfan orthe FDD, RFFlexi
air flow HW unit._x000D_
Zone
is blocked Micro
by some TDD:_x000D_
objects. Remove any blocking_x000D_
If
2. FBB
If
Flexi
1. the
Reset is
BTSthe
objects._x000D_ the
problem
FDD, source:_x000D_
still persists
Flexi BTS TDD:_x000D_
BTS._x000D_ after step 1, replace the RF HW unit._x000D_
1.
1. Check
Perform
_x000D_
Depending theafaninstalled
onSystem
the HW/SW
Module
installed and version
reset._x000D_
commissioned compatibility and the HWsource(s)
synchronization compatibility listedwith the current
in section BTS configuration._x000D_
"Meaning", see the commissioned syn
2. Replace
Check
Flexi
_x000D_ BTSifFDD, the Flexi
connector
Flexi Zone
BTSisMicro properly
TDD:_x000D_BTS.mounted. Mount fan connector properly._x000D_
2.
3.
If If
Flexi
_x000D_
If
otherthat
Zone
alarm does Micro not
is still
alarms are help,
FDD,
observed
reported replace
Flexi Zone
then the FBB
Micro
reset radio
- recommission card.
TDD:_x000D_
module
the BTS bywith
block/unblock._x000D_
the correct number
2.
1.
GPS Check
Reset
Checkreceiverthat
the the
(block/unblock)
other
(PPS BTSactive cellBTS
the parameters
BTS._x000D_
source):_x000D_ faults and from the
actfan Network
accordingly._x000D_ management systemofmatch_x000D_
cells per BTS_x000D_
4. If
_x000D_
the alarm
BTS HW is still observed
configuration then replace the module.
2.
1. Reset
If
Software
Flexi there
Zone the
and aBTS
isMicro GPS
hardware byreceiver
FDD, can(for
Flexi be
Zone
example,
blocking/unblocking
commissioned
reconfigured frequency,
it._x000D_
Micro TDD:_x000D_ atforthetheBTS power)._x000D_
setup site,where
note the following:
faulty TX isIf not the used._x000D_
GPS receiver is not locked to any satellite,
_x000D_
3.
The If that
installation
cells does
will(poornot
then help,
skyoperate replace
visibility).
in For
singlethe faulty
this,
mode the BTS.only
unless permanent
all the TX's cure
relatedis totochange
the the
proper GPS
cell antenna
are location. One indication of a fai
faulty._x000D_
Recommission
Flexi
3. CheckBTSthe FDD, the BTS
Flexi BTS
Network with the
TDD:_x000D_
management correct
system number of LCRs per RF Module.
alarms for the alarming local cell (LCR)._x000D_
_x000D_
Check
Define the
a other
valid TX active
power BTSlevel faults
value and in act radio
the accordingly.
network (RNW) configuration part of the site configuration file (SCF) and use th
_x000D_
Flexi
2. ThereBTSmight FDD,be Flexi BTS TDD:_x000D_
a malfunction in the GPS receiver. Perform a (remote) power reset for the GPS receiver._x000D_
_x000D_
4. Recommission
Perform the steps the
below BTSinto theensure
listed that order alluntil
parameters
the fault are correctly Ifconfigured.
disappears. after autonomous GPS power reset, the fault does not g
_x000D_
Replace
Flexi Zone theMicroalarming FDD,unit. Flexi Zone Micro TDD:_x000D_
_x000D_
3. There might be a malfunction in the BTS. Perform a BTS site configuration
reset._x000D_
Define
Flexi
Control BTS aInterface
valid
FDD, TX power
Flexi
not BTS level value
TDD:_x000D_
available:_x000D_ in the radio network (RNW) file and use the commissioning wizard in the BTS
_x000D_
Note! Perform the steps below in the listed order until the fault disappears._x000D_
1. The
Flexi
4. TheBTS BTS
GPS FDD,has
cable detected
Flexi and/or a malfunction
BTSconnectors
TDD:_x000D_ in the control interface of the GPS
might be damaged. Check the cable and the connectors._x000D_ receiver. A possible reason is that the BTS and the G
_x000D_
2.
1. Perform
Reset the a (remote)
System BTS
Module site
that reset
is for
causing the whole
the BTS._x000D_
alarm._x000D_
_x000D_
1.
1. Check
Reset the BTS._x000D_
the fault name of the toggling BTS fault._x000D_
3.
2.
5.
2. Perform
Replace
There
Follow theathe
might powerSystem
be aifreset
instructions HW for
Module
fault the
of the whole
in that
the GPS
toggling BTS._x000D_
is causing receiver.
BTS the Check
fault alarm._x000D_
to clear the
the operation
problem._x000D_ and change the HW, if needed._x000D_
2.
1.
4. Replace
Check
The
_x000D_ cablein the
NetActfaulty
between module._x000D_
autoconfiguration
the GPS receiver isand enabled
the and
BTS if the
might required
be working license and commissioning
incorrectly. Check if the pins file of
arethe available._x000D_
connectors (on both
_x000D_
_x000D_
2. Check the autoconnection/autoconfiguration information with BTS Site Manager._x000D_
5. The
Flexi
External
Note! BTScable
Zone between
Micro
FDD,
2.048MHz
Detailed FDD,
Flexi
information the
BTSFlexi GPS
signal:_x000D_ Zone receiver
TDD:_x000D_
about the Microtogglingand the
TDD:_x000D_ BTS might be faulty. Check the situation and
frequency can be found in the alarm history file, which can be downloaded change the cable, if needed._x00
using
Flexi
3.
6.
1. Load
There
Reset
Check Zone the
and the Micro
might correct
be FDD,
BTS._x000D_
correct Flexi
faultZone
commissioning
atheHW contents of Micro
in the file
GPS
the toTDD:_x000D_
the BTS.
receiver.
commissioning Check the operation
file._x000D_ and change the the
GPS module, ifofneeded._x000D_
1. If
There
1. there
Replacemight is an
be
the external
two
BTS. reasons 2.048MHzfor the signal
fault:_x000D_ source commissioned at the BTS site, check BTS faults that device and act acc
7.
2. There
Replace
_x000D_
further
1. The mightthe
actions._x000D_
radio unit be
BTS. a HW
that shouldfaultonlyin the beBTS connected SystemtoModule. LTE Flexi CheckSystem the Module
operation is and
alsochange
connectedthe toSystem
WCDMA Module,
system if needed._x000
module. _x00
Flexi
_x000D_
Flexi BTS
Zone FDD,
Micro Flexi
FDD, BTSFlexi TDD:_x000D_
Zone Micro TDD:_x000D_
_x000D_
In
1. this case,
Block/unblock disconnect
the alarming the radio unit
module._x000D_ from the WCDMA system module._x000D_
_x000D_
1.
2. Check is
Reconfigure
There and
might correct
anthe befrequency
error a in the
thecontents
malfunction settings in of
commissioning the the
correctly
BTS. commissioning
with respect
Perform
file._x000D_ a BTS file._x000D_
to site
the Radio Module's capabilities.
reset._x000D_
_x000D_
Flexi
_x000D_ Zone Micro FDD, Flexi Zone Micro TDD:_x000D_
_x000D_
In this
Check
2. If FSPcase, create
theorconfiguration the fault
commissioning
of the configured filecell.
with theorcorrect relation system If module - radio
is theunit and send the file tosystem
the BTS. Note
Perform
2.
FTM the FBB
Recommission
reference steps isthe
(TDM,
the
below BTS
SyncE
source,
inwith
the orlisted
the perform
ToPvalid order
as
FSP
until
commissioning
source):_x000D_
FBBfile.
the fault reset recovery.
disappears._x000D_ FCM/FCT fault source, perform module
_x000D_
To be
_x000D_ performed on the master RAT side:_x000D_
1.
3.
1. If
Ifbethere
steps
Check is
the an
1 and integrated
antenna2on dothe not
line transmission
help, replace
and antenna unitalarming
the
line (FTM) commissioned
device causes theatalarm._x000D_
module._x000D_
that the BTS site, note the following: The FTM unit operates so
Control
To
the FTM Interface
performed
synchronization not available:_x000D_
MasterRAT
priority side:_x000D_
setting) might be missing, causing the FTM's internal clock to drop to holdover mode. In this ca
_x000D_
2.
1. Fix
The
Check orBTSreplace
the has
antenna the faulty
detected lineaand parts/devices._x000D_
malfunction
antenna in antenna
line the control
device thatinterface
is causing ofFixthe
the GPS receiver.
alarm._x000D_ A possible reason is that the BTS and the G
_x000D_
1. Check
_x000D_
3. Perform thea RS485
radio IUANT
module interface
reset (onlyfor and
thethe master RATline devices. or
in sharing mode can request replace the faulty parts/devices._x000D_
for such an operation to be performed).
2.
2. Perform
Fix
Check or
TheZone alarm a
replace
the (remote)
alarms
isthe the
canceled ofBTS
faulty
the site
FTM
onlyZone reset
parts/devices.
when unit and
the RFact whole BTS._x000D_
accordingly._x000D_
Module is reset or ifdisappears.
the BTS is _x000D_ reset.
Flexi
Note!
3. Perform
Perform Micro
a power FDD,
steps
reset Flexi
below
for theinwhole Micro
the listed TDD:_x000D_
order
BTS._x000D_ until the fault
_x000D_
1. Block/unblock the BTS._x000D_
_x000D_
4. There
Replace might
parallel beRP3-01/CPRI
a HW fault in the GPS
fiber linksthe Receiver
toward oneor radio
the BTS. Replace
module so that thetheFlexi Zone Micro
maximum BTS.
mutual length difference between fiber
3. Check
Performthe synchronization settings the of
2. a power-off reset. _x000D_ FTM unit._x000D_
1. Check
synchronization the fans and ensure
master system that
module. ambient temperature on the site is acceptable. _x000D_
_x000D_
1.
3. Check the fan
2. stepsdoes
If that 1 and not2and do the
help, not connector._x000D_
help, replace
replace the alarming the module module. that is causing the alarm.
4. There
2. Replace mightthe be
fan. a malfunction in the BTS. Perform a BTS site reset._x000D_
Perform the steps below in the listed order until the fault disappears:_x000D_
_x000D_
1. Either
1. There
Check might enable
the fans the parameter actDistributedSite or switch toona the shorter fiber between the FSM and FR._x000D_
5. be and ensure that
an equipment the ambient
failure in the FTM temperature
unit. Check the operation site is acceptable._x000D_
and replace the unit, if needed. Note: Normally, the
2.
2. Restart
If that does the FSM.
not (frequent
help,
indication
1. Check activity
that the fan is replace
not BTS the
fault
blocked._x000D_ alarming
indication module.
activations/cancels instead of a stable BTS fault indication state) points to the in
_x000D_
2. Check that the fan connector is properly mounted._x000D_
If the
3. previous
If that does not steps help, do replace
not help,the there
fan.might be an equipment failure in the System Module. Check the operation and if perform
_x000D_
_x000D_
_x000D_
Flexi Zone Micro FDD, Flexi Zone Micro TDD:_x000D_
1. Check if the fan is not blocked._x000D_
2. Checkthe
Replace if the fan connector is properly mounted._x000D_
fan(s).
3. If that does not help, replace the fan.
The BTS did not start up successfully. _x000D_
_x000D_
The BTS did not start up successfully. _x000D_
If the fault is reported with alarm 7650 and SW is not consistent in the BTS, NetAct autonomously triggers an SW update with im
_x000D_
The BTSon
running did not startAfter up successfully. _x000D_
If the fault isthe
_x000D_
BTS.
reported with aalarm succesful 7650 SW andupdate:
SW is not _x000D_consistent in the BTS, NetAct autonomously triggers an SW update with im
1.
UpdateThe
running BTS
the
on will
BTS
the beSW,
BTS. onAir
unless
After with
a itthe
is
succesful previously-running
automatically
SW update:updated SW._x000D_
_x000D_ by NetAct.
If
2. the
SW fault
will is reported
be consistent with in alarm
the 7650 and SW is not consistent in the BTS, NetAct autonomously triggers an SW update with im
BTS._x000D_
1. The
Check
running BTS
on the will
the be onAir
other
BTS. active
After with
alarms the and
a succesful previously-running
act
SWaccordingly._x000D_
update: SW._x000D_
_x000D_
3.
2. The
SW
If that BTS
will
does be will report
consistent
not help, an in active
the
block/unblock SW fallback
BTS._x000D_ the systemfault, module._x000D_
but with alarm 7561. _x000D_
1.
None The BTS will be onAir with the previously-running SW._x000D_
_x000D_
3.
2. The
FSMr2:
SWis BTSbe
will If will
that report
does an
consistent notinactive
help, SW fallback
replace
the BTS._x000D_ the systemfault, but with alarm 7561. _x000D_
module._x000D_
If
FSM the
_x000D_
FSMr3: fault
fault
If the is source:_x000D_
reported
faulty cellwith alarm
is active
on theSW 7651
baseband and SW is consistent
extension module, in replace
the BTS,the theextension
operator module. must trigger an SW update to any availabl
3.
1. The
The
Reset BTS
BTS the will
will
Systemreport
be onAir an
Module with the
(note fallback
requested
that all fault,
SW
cells, but
running.
even with_x000D_
those alarm
that 7561.
are also _x000D_
operational, will betrigger
reset)._x000D_
If
Checkthe fault
_x000D_ the is reported
optical with alarm
connection between7651 and SW is consistent
the master LTE and peer in the GSM BTS, the operator
system modules._x000D_must an SW update to any availabl
2.
1. The
If
The
_x000D_ a SW
reset
BTS will
does
will be
be consistent
not resolve
onAir with in
the
the the faultBTS.
requested _x000D_
situation, SW replace
running. the System
_x000D_ Module._x000D_
If
1.
3. the
Wait
The
_x000D_ fault
for is
SW reported
start-up
fallback to with
be
fault alarm
completed
and the 7651
relatedif aand SWwill is consistent
synchronization
alarm master
be canceled._x000D_in the BTS,module
system the operator has been mustreset._x000D_
trigger an SW update to any availabl
2.
In
1.
2. The
the
The
If there SW
site
BTS is will
sharing
will
1858: be
be consistent
configuration
onAir with in
the the
where BTS.
requested
EFaultId_FaultyFcmConfigurationAl the _x000D_
LTE
SW system
running. module
_x000D_
after is connected to
synchronization the GSM
slave's recoverysystem module
reset, check viathe
theRP3-01
WCDMA system
cable be
_x000D_
FBB
Flexi
3. The
modules is
BTSfault
SW 2) FDD, source:_x000D_
fallback
the Flexi
optical BTS
fault and TDD:_x000D_
connection the related
between alarm the will
WCDMAbe canceled._x000D_
and LTE system modules._x000D_
2.
3.
If
1. The
Check
the
Reset the
Perform SW
fault the is
the stepswill be
alarms
reported
System consistent
in
below withthe
Module in in
(note the
synchronization
alarm 7651 BTS.
that _x000D_
(source master
all cells, as system
FSP)
even or
those module
7653 and
(source act
as accordingly._x000D_
FSP) in the
that are also operational, will be reset)._x000D_ BTS, NetAct autonomously triggers an S
_x000D_
Perform
3.
4. The
Reset SW the
the steps
fallback below
fault
synchronization in the
and thethe
listed
listed
master related
order
order
system alarm
until
until the
the
will
module. be
fault
fault disappears._x000D_
disappears._x000D_
canceled._x000D_
to
2.
Not
If
In the
If
the
sync
_x000D_ a SW
reset
tracking
fault
hub version
does not
isconfiguration,
reported running
resolve
satellites:_x000D_withincheckon
alarm the
the BTS.
fault
7651
alsoorder situation,
if(source
the until
radio replace
as FSP)
master the FBBx module._x000D_
ordisappears._x000D_
7653 (source
system module as FSP) in the
(WCDMA) BTS, NetAct autonomously triggers an S
is working.
_x000D_
Perform
OR_x000D_
1. The the
most steps
common below reason the for listed
this fault indication the fault
is that the GPS antenna installation has not been done properly, that is, the
to
Survey
If the
the
_x000D_ SW in
fault version
progress:_x000D_
isthereported running
with on
alarm the BTS.
7651 (source as FSP) ordisappears._x000D_
7653 by (source as FSP) in the BTS, NetAct autonomously triggersantenan S
1. Replace
antenna
Perform
1. Do has
the
nothing. steps FBBx
a The
good belowmodule.
sky
alarm visibility,
in
isonthe listed
informative the order
problem
only.until might
the
Normally, bethe
fault caused
GPS receiver installing runsthe theGPS survey antenna
for two tooreasons:
close toa) the transmitter
somebody has star
to
No
2. the
There
_x000D_ SW
stored might version
position:_x000D_
be running
abelow
malfunction the BTS.
in theorder GPSuntil receiver. Perform a (remote) power reset for the GPS receiver._x000D_
time
Perform
1. One during
ofthe the first
steps
GPS start-up._x000D_
receiver in the listed
settings is incorrect. the
Using fault disappears._x000D_
the manager SWand of the GPS the receiver, module,
set the receiver to store the positi
3. There
Position
2. Ifrevert might be
questionable:_x000D_
the isautomatic a HW
survey fault
takes in the GPS
placestorage every receiver.
now andCheck then, the operation change that GPS if needed._x000D_
_x000D_
If
Tothere
_x000D_
1. The GPS noreceiver
changes, tick mark DC has in the
Voltage
valid position
should
position be
data enabled
butselection,
it isfor not the itGPS
reporting
properly
mightAntenna
in
be an
receiver
line
indication
runs
Line.
with the the site/self
information
thesurvey
sky visibility
estimated every
from
is
timepoor
thethe and
GPS
actual
according
receivervt
satellite
install
EEPROM
installation the GPS a antenna._x000D_
invalid:_x000D_
is poor one - the GPS receiver turns the PPS reference OFF every now and then during the site survey. This mean
Flexi
instructions
To
3. The
1. theZone
Ifrevert GPS
GPS Micro
changes, and ifFDD,
there
the
installation
receiver has Flexi
are
parameter
is Zonebut
deviations
good
detected Microthewith TDD:_x000D_
the actual
Communication3gppEnabled
automatic
a malfunction theinstallation,
in survey must
still takes
EEPROM re-install
memoryplace ofthe
be enabled theGPS
every for antenna.
now
GPS the
and then,Note
reporting
receiver. that
Antenna
there
Perform might even bewhen
Line.
a (remote) the GPS
a malfunction
power an
in
reset
Perform
_x000D_
4.
2. There
Trigger the
If the aactions
might
SW updatesteps be below
detailed
a HW for in in
fault
BTS the
thein listed
toprevious
the
the GPS order steps
requested until
receiver. dothe
SW not fault
Check
version. disappears._x000D_
correct thethe situation,
operation andtherechange might thebeGPS a HW fault inifthe
module, GPS receiver. Check
needed.
NotThere
2. tracking might satellites:_x000D_
be a malfunction in the GPS receiver. Perform a (remote) power reset for the GPS receiver._x000D_
Depending
1. There
3. The most might on the
be ainstalled
common HW reason fault and in commissioned
for thisGPS
the faultreceiver.
indicationsynchronization
is thatthe
Check source(s),
theoperation
GPS andsee
antenna the commissioned
installation
change the GPS has not synchronization
been
module, ifdone
needed. properly,optionthatbelow
is, the
_x000D_
antenna has a good sky visibility, the problem might be caused
Fault 4180 is raised if switch setting is not successful. After the fourth try, group fault 3003 is raised. If there are other working by installing the GPS antenna too close to the transmitter antenc
GPS
2. There receiver
might (PPS
be a source):_x000D_
malfunction in the GPS receiver. Perform a (remote) power reset for the GPS receiver.
Note:
1. Check Perform the GPS the steps
receiver below in the listed order until the fault disappears._x000D_
installation._x000D_
1)
2.
Check Verify
Check if
thethe the IP address
GPS receiver
transport is properly
related status._x000D_
configuration configured
(C-Plane at the
address, BTS._x000D_
U-Plane address, Transport network id). If the fault was raised at s
2)
3. Verify
Check if the the Real-time
connection Performance
between the Management
GPS receiver entity
and is operational and available._x000D_
FSM._x000D_
1.
3) One
If theofabove the most havecommon been verified, reasons thefor this fault
operator canindication
reset the(especially
BTS at a suitable occasional time. indications) is that the GPS/GNSS antenna i
_x000D_
the GPS/GNSS antenna. Note that even when the GPS/GNSS antenna has a good sky visibility, the problem
The PHICH
FTM reference (Physical asHARQ
(ToPpossible Indication Channel) transmission power boost can be increased
source):_x000D_ by reducing the might
configuredbe caused
boosts
2. Check the other alarms/fault indications of the GPS/GNSS receiver and BTS and act accordingly._x000D_
1. Check
Perform that
network the signal
optimization. is being received from the ToP
3. There might be a malfunction in the GPS/GNSS receiver. Perform a (remote) power reset for the GPS/GNSS receiver modul Master._x000D_
2.
4. Check
1) If therethe
Check the is only FTM
GTP-U thestatus._x000D_
alarming
path supervision GPS/GNSS receiver connected
configuration of the eNB.to_x000D_ the GPS/GNSS antenna, check the antenna power feeding se
3.
of
2) Check
the
Check other the
the synchronization
receivers
supervised is OFF)._x000D_
network settings element of the for FTM
proper unit._x000D_
operation._x000D_
Note:
_x000D_ Perform the steps below in the listed order until the alarm disappears:_x000D_
5.
3)
1. Check
Check the
the hub connection
communication
connection between
with equipment
MME, GPS/GNSS in between receiver thethe module
eNB S1and and theGPS/GNSS
supervised antenna. Note that one antenna might be share
network element._x000D_
eNB is
Note: Perform
receiver. Sync_x000D_ theslavestepsand below in thebased
rfsharing is on whether
enabled:_x000D_
listed order until the BTS link
faultisdisappears:_x000D_
broken accordingly._x000D_
2.
1) Check
Remove
1.Check theif the
the MME
rootthe
connection is
cause operational._x000D_
with that ispath
adjacent leading to a SyncHub slave from being linksynchronized._x000D_
6.
1.
3. Perform
Check
Check ififisathe
whether local/physical
speed transport
and power
duplex reset isBTS,
setting forofthe
based
alive._x000D_
theperform
on whether
alarming
eNB S1remote GPS/GNSS
port
the X2 receiver
is re-commissioning
consistent
is broken respectively._x000D_
withmodule._x000D_
the switch portorthat is connectedthe directly to thetoeN
2)
2.
7.
2. If
Check
There
Checkthere might thea need
adjacent
be asteps
the configuration to change
HW below BTS
fault is settings,
ininthe
of transport GPS/GNSSeither
operational._x000D_
addresses antenna
at MME._x000D_ and/or possible antennavia lineNetAct
splitter, un-commission
possible line amplifier eNB prior
or lightning r
_x000D_
Note:
_x000D_ Perform the the listed order until the BTS fault disappears._x000D_
8.
If There might be a HW fault ina the GPS/GNSS receiver module. Check theverify operation and change the GPS/GNSS IPreceiver
addressmo
If this
_x000D_
FlexithisBTS fault
fault FDD, happens
happens Flexiright BTSafter
right after a commissioning
TDD:_x000D_ commissioning or or a a configuration
configuration change, change, verify the the following
IP address configuration
of the adjacent data: BTS. of
1. Check
Block/unblock the commissioning parameters with the BTS Site Manager Commissioning_x000D_
Flexi BTS FDD,the
Wizard._x000D_
BTS._x000D_
Flexi BTS TDD:_x000D_
_x000D_
Block/unblock the BTS._x000D_
_x000D_
Check
Flexi the connection
Zone Micro FDD,with Flexithe Zone iOMS Micro or the third party tool.
TDD:_x000D_
_x000D_
2. Load the correct commissioning file to the BTS.
1.
Note:
Flexi Check Perform
Zone and Micro update
theFDD, stepsconfiguration
below
Flexi Zone in the parameters
Micro listed order
TDD:_x000D_ related
until the to cell
BTSbandwidth and channels._x000D_
fault disappears._x000D_
2.
For Reset
_x000D_
1. Check failureand the BTS._x000D_
update configuration
in subscriber trace session parameters related to cell bandwidth
activation/deactivation, based on the anderror
channels._x000D_
cause provided as part of the additional info fo
3.
Flexi
2. Retry
Reset
- "SubscriberBTS configuration
the FDD, Flexi BTS
BTS._x000D_
& Equipment push._x000D_
TDD:_x000D_
Trace feature not enabled": Enable theBTS subscriber trace feature at theconfigured
BTS. Any at events correspondin
Check
1. Check and ensure
the otherinactive that the PLMNs
BTS faults. that have been listed with this fault and that have been BTS for one or mo
-3."trace
Retryreference
configuration use,push. trace cannot_x000D_ be started": This problem is out of the scope of what can be fixed at the BTS, and is with
2.
same Reset
1.Check Traceifthe the System
maximum
Reference Module number
Number. by blocking/unblocking
Aofpossible
LNADJ solution objects has isit._x000D_
tobeen reached. If all
try deactivating yes, check if there
subscriber traces areand LNADJ objects
activating them that can be man
again._x000D
3. Update
_x000D_
-Check
"max ifnumber maximum and activate
of UE number the SW
trace sessionof LNADJWto the BTS._x000D_
reached, trace cannot
was reached. If yes,becheck
started": This are
if there problemLNADJW is outobjects
of the scope
that can of bewhat can be deleted.
manually fixed at tT
4. Checkif(which
2.Check
sessions the theSW is files._x000D_
maximum the number number
maximum of LNADJL of objects
active has beentraces
subscriber reached. If yes, check
supported at the ifBTS
there
at are
any LNADJL
point in objects
time) at related
the BTS. with Lt
Tryca
Check
5. Replace if theFSM._x000D_
maximum number of LNRELW objects has been reached. If it has been, check if there are LNRELW objects that
- "Trace session cannot be started due to ongoing handover for the UE" OR "Trace session cannot be stopped due to ongoing
_x000D_
Check
NMS._x000D_ if:_x000D_
Flexi
1) the
_x000D_ Zone
Add the LNRELmaximum Microobject FDD, pointing
number Flexi Zone
of LNRELW to the Micro per TDD:_x000D_
correctcell neighbor
and WCDMA carrier
to allow thefrequency
handover has already
or enable thebeen reached
UE-based ANR. (is greater than or equa
1.
For Check
makes failure spacethe other
for new
in cell/interface activeLNRELW BTS faults.
object
tracetosession _x000D_
per cell and WCDMA
activation/deactivation, carrier frequency._x000D_
based on the error cause provided as part of the additional info
Reset
2.
2) Reset (block/unblock)
the maximum the feature BTSnumber the BTS
byisBlocking/Unblocking recover the faulty
it._x000D_ cell.of: psHoAllowed,
- "Cell trace notofenabled":
mobility parameters
Enable (either
the cell trace feature at the BTS. srvccAllowed)
Afterwards,oftry LNRELW
again toper cell and
activate theWCDMA
requiredcarrie cell/in
3. Update
Block/unblock and activate
the BTS. the SW to the BTS._x000D_
- "trace reference in use, trace cannot be started": This problem is out of the scope of what can be fixed at the BTS and is within
4.
theCheck
1. same the
Check forTrace SWReference
E-UTRAN files._x000D_cellsNumber.
that operate A possibleon thesolution
same frequency is to try deactivating
layer and use all cell
the sameand interfaces
PCI and that traces.areAfterwards, try activat
in close vicinity._x00
5.
2. Replace
- "max
Reassign number Flexi
PCIs Zone Micro
of cell/interface
for the BTS.
discovered trace cells. sessions reached, trace cannot be started": This problem is out of the scope of what can b
cell/interface trace sessions (which is the maximum number of active cell and interface trace sessions put together supported a
If the GPS is configured as reference clock, perform the following:_x000D_
1.
Note: Check the GPS
Perform receiver
the steps belowinstallation._x000D_
in the listed order until the alarm disappears._x000D_
2.
1. Check
Check the
the GPS receiver
availability of status._x000D_
the adjacent BTS._x000D_
Note:
3. Check Perform
the the steps below
connection between in the
thelisted order
GPSBTS._x000D_
receiveruntil theFSM._x000D_
and alarm disappears._x000D_
2.
1. Check
Check the connection
connectivity to with
the the
related adjacent
adjacent BTS._x000D_
_x000D_
Note:
3. Perform and
Disconnect the steps
reconnectbelowthe in adjacent
the listedBTS.
order until the alarm disappears:_x000D_
2.
If
1. Check
the
CheckTOP other
signalfaults._x000D_
is
availability configured
of MME._x000D_ as reference clock,until
perform the following:_x000D_
Note:
3. Check Perform the steps below in to
thethe
listed order tothe
thealarm disappears._x000D_
Check
2.
1. Check
Check thethe
other
the
parameters
connection
faults on
availability to ofrelated
the
MME TOP
and
MME._x000D_server.X2 interface
BTS._x000D_ adjacent BTS._x000D_
4.
Check
3. Reset
Check the
the BTS.
root cause reported in the fault. Based on the root cause, these necessary actions must be taken:_x000D_
2. Check the
_x000D_ the parameters
connection with related to S1 interface in the BTS and MME._x000D_
MME._x000D_
4.
Note:
3. Reset the BTS.
Perform
Disconnect the steps
and belowMME. in the listed order until the alarm disappears._x000D_
1.
1. "S1
Check linkthe
failure" -reconnect
Check
availability of for any active 6202 "Transport layer connection failure in S1 interface" faults. Take necessary action
MME._x000D_
Check
2. the value of the "rimStatus"
"Network parameter
- Checkinthe LNADJG objects to findreconfiguration
all impacted RIM associations._x000D_
2. Check theReconfiguration
_x000D_ connection withInduced" MME._x000D_ most recent network made w.r.t changes in the list of PLMNs
3.
Check
3. "MME Configuration
the value
Disconnect and Changes"
ofreconnect
the "rimStatus" MME. - Check the most recent configuration changes made at MME(s) with which the eNB is conne
parameter in LNADJG objects to find all impacted RIM associations._x000D_
If only a few LNADJG objects have "rimStatus" Unavailable, check if LNADJG identifiers (cell global id) of related GERAN cells
_x000D_
This
_x000D_ fault does not require any (special) actions.
If only a few LNADJG objects have "rimStatus" Unavailable, check if LNADJG identifiers (cell global id) of related GERAN cells
If many Technical
Collect
_x000D_ LNADJG Logs objects fromhaveBTS "rimStatus"
to clear anUnavailable,
alarm raisedcheck by this thefault.
connectivity to GSM network (MME<->SGSN<->BSC)._x000
If many
Flexi BTSLNADJG
FDD, Flexi objects
BTShave "rimStatus" Unavailable, check the connectivity to GSM network (MME<->SGSN<->BSC)._x000
TDD:_x000D_
Source: _x000D_
Note! Perform the steps below in the listed order until the fault disappears._x000D_
-_x000D_
FCM/FCT: Perform eNB reset._x000D_
Flexi
-Flexi
FSP/FBB:BTS FDD, Flexithe
Change BTS cellTDD:_x000D_
configuration to decrease call processing load._x000D_
Note: BTS FDD,
Perform Flexi
the stepsBTS TDD:_x000D_
below in the listed order until the fault disappears._x000D_
_x000D_
Flexi
Note! BTS FDD,
Perform Flexi
the steps BTS TDD:_x000D_
below in the listed order until the fault disappears._x000D_
1. Reset
Flexi
Note: Zonethe
Perform System
MicrotheFDD, Module._x000D_
steps Flexi
below Zone Micro TDD:_x000D_
inModule._x000D_
the listed order until the fault disappears._x000D_
1.
2. Reset
Flexi BTS
Replace the
FDD, System/Baseband
the Flexi
System BTS TDD:_x000D_
Module or FBBx module (according to the fault source)_x000D_
None
1.
2. Reset the System Module._x000D_
NoReplace
Note:
_x000D_
2.
Perform
actions
Replace
the the
are
the
System/Baseband
steps below in the
required
System
Module._x000D_
listed order until the fault disappears._x000D_
Module or FBBx module (according to the fault source)_x000D_
_x000D_
1. Reset
Flexi ZonetheMicro
System
FDD, Module._x000D_
Flexi Zone Micro TDD:_x000D_
_x000D_
Reset
Flexi
2. the BTS
Zone
Replace Micro when
the theFDD,
System allFlexi
required
Module ZoneorBTSMicro
FBBx IPmodule
settings(according
TDD:_x000D_ have beentoset. the fault source)_x000D_
Note:
Flexi Perform
Zone Micro steps
FDD, below
Flexi in
Zone the listed
Micro order until the fault
TDD:_x000D_ disappears._x000D_
1.
1. Reset
_x000D_
1) Check
Reset thethe
if BTS._x000D_
the
the steps far end
BTS._x000D_ has BFD switched on._x000D_
Perform
2. If
Flexi
2) the
Check fault
Zone Micro
cabling below
persists,
FDD,
and in the
replace
Flexi
network listed
the
Zone BTS.order
Micro
connections until the fault
TDD:_x000D_
toofthe end.disappears._x000D_
2.
E1
1. Replace
interfaces:
Reset the the Flexi
Check
BTS._x000D_Zone
that Micro
the BTS.
interface type thefar
far-end interface is also configured to be a framed E1 interface. If this is not t
Perform the steps below in the listed order until the fault disappears._x000D_
2.
1.
1. Replace
Check
Reset the Flexi
thatBTS._x000D_
the Zone Micro BTS.
the cables are connected to the correct connectors.
JT1 interfaces: Check that the interface type of the far-end interface is also configured to be a JT1 interface. If this is not the ca
2. Check
1. Replace thatthethe
Flexi Zoneare
cables Micro BTS._x000D_
connected to the correct connectors._x000D_
2.
2. Check
Check that
that the
the interface
interface at
at the
the far-end
far-end interface
interface is is switched
switched on. on._x000D_
Flexi BTS FDD, Flexi BTS TDD:
3.
1. Check whether there are active alarms at the far end. If there are, follow Ethernet
the instructions forofhandling
the unit.those alarms._x000D_
3. Insert
Use Check an
the BTS SFP
Sitemodule
whether there are
Manager withto the
active
checkcorrect
alarms
whichlaserthetype
far (class
atinterfaces end. If 1)
have to the
there
been are,Gigabit
follow the
configured interface
as instructions for handling
synchronization sources. those alarms.
Use
Flexi BTS
Zone Site
Micro Manager
FDD, to check
Flexi which interfaces have been configured as
4.
1. To verify
Check
synchronizationthat thatthethe hardware
cables
sources. are Zoneof theMicro
connected TDD:
interface
to theunit works
correct correctly, connect a loop cable and check whether the alarm disappear
connectors.
1. Plug-out/plug-in
Execute general SFP
configuration module. checks:_x000D_
2. Check whether the interface at the far end is switched on.
-2.
3. Checkwhether
Configuration
Check
None. for SFP validity
of CMP
there are (could
server IP be
active wrongat
address
alarms type).
and theport
farand
end.DNS server
If there are,IPfollow
address._x000D_
the instructions on handling those alarms.
For
-3. all interfaces,
Insert a
Configuration compliant
of do as
routingSFP follows:
module.
entries towards remote peers._x000D_
4. To
1)Checkverify that
cablingofand the hardware
network of the interface
connections unit
to the far works
end. correctly, connect a loop cable and check whether the alarm disappear
- Configuration IPSec policies towards remote peers._x000D_
1. Check
2)Check
Check
1)Inspect that
Link
remotedetailsthe
OAM
peerscables
of event-
theand are
type andconnected
Linkcritical
intermediate
of the OAM tostate
networkthe correct
event elements
through connectors.
information. interconnections._x000D_
online configuration management.
2. Check
3)Check
Check
2)Check the whether
Ethernet
Link LDAP OAM the interface
interface
connection
state at theof
configuration
towards
information farthe
the end
at is switched
local
Certificate on. side.
andRevocation
interface. remote Listnecessarily
server._x000D_
Replace
3. Check the
whetherfaulty SFP.
there Note that
are active only the
alarms at SFP might be faulty, not the entire hardware unit.
4)Insert
Check
3)Check acabling
DNS Link OAM
names._x000D_
and loopback.
network connections tothethefarfarend.
end.If there are,
follow
1. Clean
Check
4)Check the
thetheinstructions
cables
size
Ethernet of the and onconnectors.
file
interface handling
at those alarms.
the Certificate
configuration atRevocation
local and remoteList server.
side.
4. To verify
5)Insert
Check that a Link that
the OAMthe hardware
loopback.
configured of the
interface type interface
matches unit works correctly,interface
the configured connect type of the far end. If this is the case, the problem is
a
2.loop
Check cable
thatand the check
connectors whether arethe alarm connected
properly disappears.to the unit.
Check the intermediate transmission network for alarms indicating the root cause and follow the instructions for handling these
Monitor
3.
1. Checkthe that
the received
the cable
intermediate clock quality. to thenetwork
connected
transmission interface forinalarms
question is not damaged
indicating and isand
the root cause within the the
follow specifications.
instructions for handling thes
Replacing faulty hardware:_x000D_
4.
2.
1. Follow
To check the signal
inthe in thehardware,
thetransmit network and check
connect whether
a loop inany
cable andother alarms
check that concerning the fault
no alarms appear forare
thisoninterface.
(such as Laser End of Life).
1) Re-Plug
Check cabling. expected transport unit referenced the alarm text._x000D_
_x000D_
2) Check
Check CCM configuration at remote peer.
1)
2. In casecabling.
there is a unit present in the slot, remove it from the slot_x000D_
2)
and Check
Check plug
youritconfiguration
back in. If the
username atunit
and remote peer.
is still
password. not recognised and the alarm_x000D_
remains, replace
Provide the certificate. the faulty unit with a new one. _x000D_
_x000D_
1. Check the network
De-commissioning betweencommissioned
previously both BFD peers for physical link failures or misconfigurations.
hardware:_x000D_
1. Re-commission
Check the BFD configurationto remove the hardware
at local end. unit referenced in the alarm text._x000D_
2. Check if the BFD functionality in the peer is switched on and that the configurations of the BFD peers match.
_x000D_
Flexi BTS FDD, Flexi BTS TDD:
Note 1: Before
Try with re-commissioning,
local management or site the hardware
support equipment.unit must not be present in the slot._x000D_
Note 2: "Send all parameters" is required for re-commissioning.
Flexi Zone Micro FDD, Flexi Zone Micro TDD:
Confirm
check that
the Ethernet Synchronization
connectivity master/slave setting are correct on the BTS and backhaul equipment.
to NTP server_x000D_
Note: Flexi
check Zone
the NTP Microconfiguration
server BTS only supports
at BTS.slave mode.
check that the vendor BTS certificate expiry date and renew it.
Update trust anchors.
1. Check the fault name of the toggling FTM fault from the Fault name of_x000D_
this fault._x000D_
_x000D_
Flexi
2. Follow Zonethe Micro FDD, Flexi
instructions of theZone Micro FTM
toggling TDD:fault to clear the problem._x000D_
1. Confirm
_x000D_
Check that SyncE
the cable is desired as a synchronization source.
connectivity._x000D_
2.
Note!
CheckConfirm Detailed
the TOP that information
eNB configuration
configuration._x000D_about the settings
toggling for frequency
ssmEnabled canisbe correct.
found in_x000D_
3. Troubleshoot with Backhaul provider on the reason SSM errors.
alarm history file, which can be downloaded using BTS Site Manager. The log file is available with Snapshot._x000D_
SW upgrading:_x000D_
- Upgrade the FSM SW release to the latest version that includes the support for the new external tranport device variant._x000
_x000D_
An
UnitIPvariantTrafficreplacement:_x000D_
Capturing session is ongoing and base station traffic is captured to a local Ethernet interface or into a file on the ba
-Operator
Replacecan the check
unsupportedthe current device variant
remote to another
tunnel endpoint oneparameter
that the currently running SW release supports. on NetAct or BTS SM
(ipSecBkupTunCurrRemoteEndpoint)
1. Check which Radio Modules are in an incorrect frequency._x000D_
2. Replace
Note! Perform the theincompatible
steps below Radio
in the Module(s).
listed order until the fault disappears._x000D_
1. Change the BTS configuration._x000D_
Note: This fault does not require any (special) actions._x000D_
2. Reset
Check thethe BTS.
fault history andTDD:_x000D_
other active faults of the unit._x000D_
Flexi BTS FDD, Flexi BTS
Perform
1. Checkthe thesteps
fan and below in the listed order until the BTS fault disappears._x000D_
connector._x000D_
1.Check
2. the cables toward the radio module._x000D_
1. Replace
Checkthe
2.Reset the thefans
radio
fanandmodule.connector._x000D_
module._x000D_
2. Replace
3.Remove
Flexi BTS FDD, the faulty
the fan module.
Flexi unit._x000D_
BTS TDD:_x000D_
_x000D_
1. Retry the SW update._x000D_
If the FSM is the fault source:_x000D_
Flexi
2.
1. If
Reset Zone
other the Micro
flashSystem FDD,
memory-relatedFlexi Zone
Module (note Micro
faults
thatare allTDD:_x000D_
active for the
cells, even alarming
those whichmodule are also atoperational,
the same time,will replace the alarming module._x000D
be reset)._x000D_
1. Try
1.Remove
_x000D_ to block/unblock
the faulty the cell.
unit. _x000D_
2.
2. If a to reset does not resolve the fault situation, replace the System Module._x000D_
1. Try
Flexi Zone block/unblock
Block/unblock
_x000D_ Micro the FDD, the
FlexiFR
System module._x000D_
Zone
Module. Micro TDD:_x000D_
3.
1. If it
Retry doesthe not
SW help, reset
update._x000D_ the BTS.
If the
1. RunFBB fastistuning
the fault withsource:_x000D_
BTS Site Manager._x000D_
2.
1. If otherthe
Replace flash
the memory-related
System Module. faults thatare all active for the BTSwhich at the same alsotime, replace the BTS.
Recommission the LCRs in a(note
Reset
_x000D_ System Module way that only cells,
one even
sectorthosetype is usedare in one operational,
RF Module. will be reset)._x000D_
If a reset does the
2. Block/unblock not alarming
resolve the fault situation, replace the FBBx module._x000D_
unit._x000D_
Note:
OR_x000D_
_x000D_ Perform the following steps in the listed order until the fault disappears:
1.
3. Replace
Note: Perform the theFBBx
alarming module.
following unit._x000D_
steps in the listed order until the fault disappears:
1. Download two different software packages so that the faulty file is removed from the BTS.
1. Check that each cell object is assigned to an existing LCR ID in the Configuration file and make corrections if necessary.
1. Download two different software packages so that the faulty file is removed from the BTS.
2. Downloadare
Instructions thedivided
software into again.
three sections. Execute steps from section_x000D_
2. Download
chosen based theon corrected
best knowledge Configuration file andsense
reset to BTS.
2. Swap
1. Download the software
the alarming and again.working and links, common
and check whereminimize
the alarmthe is cost and_x000D_
reported now.
3. Replace
time the System Module.
effort. _x000D_
1. Swap the alarming and working links, and check where the alarm is reported now.
_x000D_
3. If
2. Replace
the alarming the Systemlink remainsModule. the same, replace the System Module.
Section
Note: A: Check
Perform theon stepssystem below module
in the side:_x000D_
listed order until the BTS fault disappears._x000D_
2.
1. If the alarming
Check if connector link remains
seal is the same,
properly replaceand
mounted thefirmly
System Module.
_x000D_
3. If the
Note: alarming
Perform thelinksteps changes,
below in replace
the listedthe order
module the in
behind
until place.
that
BTS link._x000D_
fault disappears._x000D_
2.
1. Check
_x000D_ if
the the SFP
other (Small
active BTSForm Factor
faults and Pluggable)
act is properly
accordingly._x000D_ connected/mounted_x000D_
3. If the
Note:
in alarming
Perform thelinksteps changes,
If below replace
in the listedthe order
module behind
until that fault
the correct
BTS link. disappears.
1. the
_x000D_
Check Systemthe otherModule. active SFP
BTSconnection/mounting
faults and act accordingly._x000D_ is not readjust_x000D_
the
2.
Note:
_x000D_connection/mounting._x000D_
Check the
Perform cables
the between
steps below thein System
the listed Module
order and
until RF
the Module._x000D_
BTS fault disappears.
1.
3. Check
Check
_x000D_ the
if theother
LED BTS
indicatesfaults the andfaultyact accordingly.
SFP (connected to System Module)._x000D_
2. Check
Note: the cables
Perform the steps between belowthe System
in the listedModule and the
order until RF BTS Module. faultNote that dirty optical connectors might cause the signal leve
disappears.
Replace
3.
1. Reset the
Check
_x000D_ theSFPRF if it is faulty._x000D_
Module
commissioning and/or System Module,
parameters with thedepending
BTS Site Manager on the alarm source:_x000D_
Commissioning Wizard.
2.
4. Check
Note:
Check
a. Resetthe
Perform
if theambient
the
the steps
optical
RF temperature
cable
Module below is
by properlyof listed
the BTS/modules.
inblocking/unblocking
the theIf BTS
order untilit._x000D_
connected/mounted the in ambient temperature is too high, make sure the airflow to the BTS
faultSFP._x000D_
the disappears.
3.
1. Depending
Check
threshold the
value. on the
other fault BTS
active source, faults.reset the ROM
If the RF Module
disk isand/or
corrupted, System changeModulethe by blocking/unblocking
alarming module. it._x000D_
5.
2. Clean
Load
Note:
_x000D_ b.Performthe
Reset
the optical
the
theSystem
correct connectors
commissioning
steps Module
below inthat are
byfile
the toconnected
blocking/unblocking
listed theorder
BTS.untilto SFP. Reset
theit._x000D_
BTS faultRFdisappears.
HW_x000D_
1.
unitCheck
byPerform the antenna procedures
block/unblock line and antenna and line devices.
check if Factor
this Makethe
solves sure that the antenna line connectors are in the right torque.
_x000D_
4.
2. Replace
Reset
Note:
3. Reset the
the the
RF alarming
the Module
alarming steps modulemodule's
and/or
below byin Small
System
the listedForm
Module,
order
blocking/unblocking until Pluggable
dependingthe BTS
it. onproblem._x000D_
the(SFP).
fault BTS Check also the SFP in the other end and replace it if ne
fault source:
disappears.
_x000D_
4.
1. Replace
Check
_x000D_
a. Reset the the
the alarming
cables
RF related
Module RF byModule._x000D_
to the Masthead
blocking/unblocking Amplifier
it. (MHA).
2.
1. ResetB:
Check
Section the
thatalarming
all mandatory RF module parameters by blocking/unblocking
exist in the radio it. network data for the specific cell.
5. b. ResetCheck
_x000D_
Replace
FlexiBTS:
4. Replace the
the
on radio
alarming
System
alarming RF
Modulemodule
module.
side:_x000D_
Module._x000D_
by blocking/unblocking it.
5.
2.
1. Check
If the System
Reset
Block/Unblock
_x000D_
1. Reset if connector
the
the Module
alarming
site. seal
MHA
the FSM._x000D_ ismodule
is the properly
source bymounted
or replacing andthe
blocking/unblocking firmly
RF in place._x000D_
Module
the RFdoesModule not which
clear the
the fault
MHAsituation, replace
is connected to. the alarming System
3.
2.
2. Replace
Download
Check
If blocking if the
theand
or faulty
SFP partsthe
activate
(Small
unblocking and/or
Form
thecorrected
FSM devices
Factordoes along
commissioning
Pluggable)
not theis
help, antenna
file to
properly
replace theline.
the BTS.
connected/mounted_x000D_
FSM.
6.
3. If the the
Update
Update System
and Module
SWactivate
to the BTS. is the
the SWonly to the alarming
BTS. source or replacing the RF Module does not clear the fault situation, replace the al
in
3. the
2. Replace
Replace RF module.the If SFP
the Transport
faulty device(s).connection/mounting
submodule, is not correct
whichtois shared
located inside readjust
the System the_x000D_
Module.
4. Replace
RP3-01 cablingthe
connection/mounting._x000D_ RF
from Module.
peer system modules radio module is to be corrected._x000D_
4. Check the SW files.
3. Check the
1. if theantenna
optical lines:
cable antennas,
is properlyantenna connected/mounted
cables, connector in the torques,
SFP._x000D_ and antenna line devices._x000D_
4.
2. Clean
Check
5. Replace
4064 the
the
triggered optical
antenna
the during
alarmingconnectors
line
BTS at RF
(TX-cable-antenna)
module.
startup:_x000D_ module end. Reset
impedance RF HW
matching. unit by block/unblock_x000D_
procedures
Note! andthe check if below
this solves the problem._x000D_
Note! Perform the steps below in
_x000D_
Perform steps in the
the listed
listed order
order until
until the
the fault
fault disappears._x000D_
disappears:
1. Check if other BTS fault indications are active. _x000D_
Section
Replace
2. Make C:the
sure Check
faulty of optical
unit. connection:_x000D_
that all RP3-01 fiber links and SFP transceivers between system module and radio module are properly connecte
1.
1. Reset
Check the
ifthe BTS.
optical cables are not over bend. If yes then replace the optical_x000D_
3.
2. Restart
Replace the Radio
faulty Module._x000D_
module/unit.
cable since over
4. Restart the BTS._x000D_ bending the optical fiber cables damages the cables and_x000D_
can
_x000D_detach or damage the connectors. _x000D_
2. OPTIONAL: Test the
4064 triggered during BTS runtime:_x000D_ fiber cable (f.ex. measure the optical attenuation)_x000D_
from
Change the faulty optical cable. check measuring equipment documentation_x000D_
System Module end. Please
for instruction details._x000D_
Enable power feeding towards Radio Module by switching RF power on in BTS Site Manager.
Update compatible SW for all conflicting RP3-01 nodes (check the SW versions to see the active SW version and update the ac
Note
Definethat in case
a valid TX of chained
power levelradio
valuemodules, the SW
in the Radio update
Network in this particular
configuration RNWcase can onlyforbealldone
parameters cellsone-by-one alongradio
using the same the RF ch
modu
In case the IP conflict situation is not solved, check the conflicting RP3-01 node on the site and ensure the SW update procedu
Optical cabling from the System Module to the Radio Module needs to be corrected.
Instructions in issue 01
Check the active fan alarms and the air flow of the BTS.
1. Download the BTS SW again._x000D_
2.
There Reset are(block/unblock)
several possibilities the BTS._x000D_
for the alarm activation. Therefore, a BTS Clock Frequency History feature has been developed.
3.
history If step 2
feature,does not
see help,
the replace
online help the alarming
of BTS Site module._x000D_
Manager).
1. Make sure that the module is properly
_x000D_ connected. If the Depending
module LEDondoes the possible reason,
not light up, follow the
the module instructions
is faulty. Checkbelow:_x00
the modul
_x000D_
2. Check the fault history._x000D_
1.Block/unblock
1. BTS._x000D_
In case of a fault in the transmission network synchronization, you must correct the network synchronization. The long-term a
_x000D_
2.If it doesn't helpthe replace thethat
module which the is causing the alarm. _x000D_
_x000D_
1. Block/unblock module is causing alarm._x000D_
_x000D_ If the thebasic accuracy of the Iub signal theis alarm.
correct,
2.
Update
Flexi
Replace
Zone Micro
the
BTS module
with
FDD,
that
compatible is causing
Flexi ZoneSW (check
Micro the SWbut
TDD:_x000D_
there istotoo
versions much
see instability,
the active SW that is, the
version, jitter
and or wander
update is outside
the active the acc
SW version),
needed._x000D_
1.
Update
_x000D_ Block/unblock
compatible theSW BTS._x000D_
to the BTS (check the SW versions to see the active SW version, and update the active SW version), un
2.
3. Check
1. Perform
In casethe a power-off
of aNTP reset. _x000D_
BTSsetting._x000D_
equipment fault, the location might be:_x000D_
3.
_x000D_ If steps 1 and 2 do not help, replace the module that is causing the alarm.
1.Retry the file update a few times._x000D_
Transport
2.
2.Check Checkthe part:_x000D_
the stratum
FTP accountparameter on the NTP server._x000D_
user settings._x000D_
1.
_x000D_ Retry the SW update._x000D_
3.Check thesnapshot
file and path names._x000D_
-2.
3.
Flexi
4.Check
Save
First,
Check BTS the
checkthat
theFDD, the alarms
a GNSS
Flexi
administration
and
is of
BTS check
the
log TRS
configured the with
TDD:_x000D_
on the
download
and BTS
fileconnected.
server.
status
Site from the
Manager
_x000D_ andBTS
act SWDLreport in the snapshot file.
accordingly._x000D_
-_x000D_
1. If there
Retry are
the no
SW alarms,
update._x000D_
Unblock the module with BTS Site Manager. check the TRS synchronization settings._x000D_
_x000D_
2. If other flash memory-related faults are currently active for the module that is causing the alarm, replace this module._x000D
To
FCM
_x000D_ cancel the fault, unblock the cell.
unit:_x000D_
_x000D_
Flexi
To cancel Zonethe Micro FDD,
fault, unblockFlexithe Zone BTS.Micro TDD:_x000D_
Unblocking the BTS causes a BTS reset.
-1. If the
Retry TDM
the reference
SW signal
update._x000D_ accuracy
Check the fault history and other active faults of the unit._x000D_ and the TRS are in order but the FCM unit is still alarming, run the fast tuning with BTS S
-_x000D_
2. IfIfthe alarm
other flash is still active after the
memory-related fastare
faults tuning is finished,
currently active reset the
for the site.replace
BTS, If the problem
the BTS. does not disappear in a few minutes, res
1. IfBlock/unblock
-Note: thatThis
does not the alarming
help, replace unit/module._x000D_
the FCM unit._x000D_
2. Remove/reinsertfault doesthe notalarming
require any (special) actions.
unit/module._x000D_
_x000D_
Flexi BTS FDD, Flexi BTS TDD:_x000D_
3.
Note Replace
thattheif the
the alarming
reason is unit/module.
in the transmission
Replace
1. Upgrade alarming
the systemunit/module._x000D_
module SW._x000D_network synchronization, replacing the faulty unit does not solve the problem. Furth
network,
_x000D_
2. not to a fault in the unit._x000D_
1. Replace
Check
_x000D_
Flexi Zonethe
the
Micro
unit._x000D_
otherFDD,active alarms.
Flexi ZoneIfMicro the ROM disk is corrupted, change the alarming module._x000D_
TDD:_x000D_
_x000D_
_x000D_
4. After
Replace
1. Check the thefault
the BTS. situation
other active has alarms.been If cleared,
the ROMyou diskmight need to tune
is corrupted, changethetheBTS master module._x000D_
alarming clock because the BTS master clock adjus
2. Block/unblock the alarming module. There are no recovery actions, therefore block/unblock can be tried once. If that does no
_x000D_
1. Check the other active alarms. If the ROM disk is corrupted, change the alarming module._x000D_
_x000D_
-_x000D_
2.manually
Block/unblock by changing
the alarmingthe DAC word (during
module. There are a site
no visit)_x000D_
recovery actions, therefore block/unblock can be tried once. If that does no
1. Check
-_x000D_
or with the tuning,
fast other active
in whichalarms.
the If themaster
BTS ROM disk clock isiscorrupted, achange
tuned in actions, the alarming
few minutes module._x000D_
automatically nearcan
thebeIub reference
once. If(normal tunin
2. Block/unblock the alarming module. There are no recovery
_x000D_ therefore block/unblock tried that does no
Note,
1. however, that you should only use the fast tuning in case
Check the other active alarms. If the ROM disk is corrupted, change the alarming module._x000D_ the Iub reference signal is known to be a good one. Otherwise,
_x000D_
2. Block/unblock the alarming module. There are no recovery actions, therefore block/unblock can be tried once. If that does no
_x000D_
1. Block/unblock the FSM._x000D_
_x000D_
Background
2. Block/unblock information:
the alarming The principle
module. is that in
There arethenomobile
recovery network, thetherefore
actions, synchronization goes from
block/unblock can be thetried
S1 interface. However,
once. If that does noin
2. If that
Note! does not
Perform the help,
steps replace
belowthe inthe
thefaulty
listed module.
order until the fault disappears._x000D_
operator.
_x000D_ This does not harm system if the synchronization of the leased line service provider is also accurate or stable eno
_x000D_
Flexi BTS FDD, Flexi BTS TDD:_x000D_
Flexi
1. If theBTS FDD, Flexi
alarming module BTSisTDD:_x000D_
the System Module (FSM1), restart the BTS._x000D_
[User
1. defined]
2. Reset
If that doesthe Systemnot help, Module._x000D_
replace the alarming FSM._x000D_
2. Replace
[User
_x000D_ defined] the System Module or FBBx module (according to fault source)._x000D_
_x000D_
Flexi Zone
[User defined] Micro FDD, Flexi Zone Micro TDD:_x000D_
Flexi
1. Zone Micro
Replace the BTS. FDD, Flexi Zone Micro TDD, Flexi Zone:_x000D_
[User
1. Replacedefined] the Flexi Zone Micro BTS.
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
Note: Perform the following steps in the listed order until the fault disappears:_x000D_
_x000D_
1. Make sure that the unit/module is properly connected. If the unit/module LED does not light up, the unit/module is faulty. Che
1. Use BTS Site Manager to perform a full commissioning to the BTS using the NetAct backup upload SCF file as template._x0
_x000D_
Flexi
2. BTS FDD, Flexi
Download BTSsoftware
TDD:_x000D_
2. Check the two
_x000D_ faultdifferent
history._x000D_ packages so that the faulty file is removed from the BTS._x000D_
3. Download the software
Flexi BTS FDD, Flexi BTS TDD:_x000D_
_x000D_ again._x000D_
Flexi
_x000D_
1. Zone Micro
Replace FDD, Flexi
the alarming Zone Micro TDD: _x000D_
module._x000D_
Flexi
Check BTS
the FDD, Flexi BTS
frequencies' TDD:_x000D_
parameters against the BTS HW configuration. Check whether the connected radio supports the carrier
4. Replace
_x000D_
Perform the the SysteminModule.
recovery theTDD:_x000D_
following sequence:_x000D_
HW
Flexi
Flexi that
BTS might
FDD,
Zoneif Micro have
Flexi
FDD, limitations
BTSFlexi Zonethe in the
Microsupported
TDD:_x000D_ frequency range and bandwidth.
1.
1. Check
Check if the
the cable
signal connecting
is being recieved system module and radio module or the cable connecting the extension baseband module
1. Download
Replace
2. Replace thethe thecable._x000D_
correct
alarming Module._x000D_ reference clock source._x000D_
configuration._x000D_
System from the
2.
2. Check
Reset the BTS._x000D_
FTM status._x000D_
_x000D_
3.
Flexi
3. CheckBTSthe
Change thesynchronization
FDD,
the faulty
Fleximodule (FBBx
BTS TDD:_x000D_settings or of FR)._x000D_
the FTM unit._x000D_
3.
4.
Note!Replace
If it does
Perform the
not BTS._x000D_
help,
the replace
steps below FCM/FCT
in the (system
listed ordermodule)._x000D_
until the fault disappears._x000D_
_x000D_
1. Block/unblock the System Module._x000D_
_x000D_
1.
FlexiCheck the
Zone Micro other alarms
FDD,site Flexi of the
Zone BTS
Micro and FTM and act accordingly._x000D_
_x000D_
Commission
Flexi
2. If Zone
there are the
Microno BTS
FDD,
other FlexiwithZonecorrect
Micro
synchronization-related IP TDD,
addresses.
TDD,
Flexi Zone:_x000D_
Flexi
alarms Zone:_x000D_
active, start the fast tuning with BTS Site Manager._x000D_
1. Replace
2. Check the thebackhaul
System connection.
Module.
Replace
3.
1. Resetuntil
Wait the theBTS.
site.the
Run fast tuning
module again._x000D_
is automatically heated to the required start-up temperature._x000D_
4.
1. Check
Check the
_x000D_ the reference
antenna cables signaland accuracy
connectors by measuring
toward the it with
MHA. a frequency
Fix or replacecounter
the (note:
brokenrequires a good timebase for the counte
parts. _x000D_
tuning._x000D_
2. If the fault has been active for more than two hours, check the environmental conditions of the site.
_x000D_
1.
5. Check
If the antenna
that does not help, cables
replace and theconnectors
system toward the MHA. Fix or replace the broken parts. _x000D_
module._x000D_
2. Restart
_x000D_ the MHA by blocking and unblocking the Flexi Radio (FR) Module._x000D_
_x000D_
1.
NOTE!Check theoperation
This antenna line affectsandall antenna
antenna line devices.
lines and Fix related
cells or replace theFR
to the faulty parts/devices._x000D_
Module, not just the faulty one. If the alarm reappears
2.
Flexi
2. Restart
The Zone
alarm the
Micro
isMHA FDD,by blocking
cancelled FlexionlyZoneatand
RF unblocking
Micro
Module TDD, theor
Flexi
reset Flexi Radio
Zone:_x000D_
BTS reset. (FR) Module. _x000D_
Flexi
NOTE! BTSThis FDD, Flexi
operation BTS
affectsTDD:_x000D_
all antenna
This
1. fault is most likelycables,
the result of a BTSlines hardwareand cells related
problem or to the FR Module,
aline
reference source not just
that the faulty
is being one. Ifbythe
followed thealarm
BTS reappears
that is in a
1. Check
1. Check the
Identify the
the
antenna
antenna
currently cables,
selected
connectors,
connectors,
synchronization
antenna,
antenna, and
and antenna
reference antenna
source line
of
devices
devices
the BTS
that
that
with
can
might
the
interfere
cause
active
with RF signal._x000D_
interference
1818 fault. If it with
is a the RF signal._
transport-based
2. Check
_x000D_ the antenna line (TX-cable-antenna) impedance matching._x000D_
alarms
Replace
_x000D_ orthe
faults associated
alarming Radiowith Module.the respective time servers (If there is a fault associated with a network-based time server, it is
2. Check the antenna
IEEE1588-2008 master line (TX-cable-antenna)
clock impedance matching.
Flexi
Replace Zone theMicro
alarmingFDD,Radio Zone ifMicro
and the 1818
Flexi Module/MultiRadio fault
TDD:_x000D_ subsequently
Combiner. clears._x000D_
2.
1. If the BTS
CheckRadio uses
the connection its GPS reference
and (block
integrity source
of antenna while the 1818
connectors, fault or ifand
cable, the antenna.
1818 fault_x000D_
persists for more than two hours after corre
Perform Module reset / unblock). If this doesn't help - replace alarming Radio Module.
2. Reset the BTS device. If the alarm persists, replace the BTS.
Perform RET calibration. If that does not help, replace the RET unit._x000D_
In case of
Perform RET1845: send valid
calibration. configuration
If that does not help, file toreplace
the alarming
the RET device.
unit._x000D_
In case of 1845: send valid configuration file
Perform RET calibration. If that does not help, replace the RET unit._x000D_ to the alarming device.
In case of
Perform RET1845: send valid
calibration. configuration
If that does not help, file toreplace
the alarming
the RET device.
unit._x000D_
In case of
Perform RET1845: send valid
calibration. configuration
If that does not help, file toreplace
the alarming
the RET device.
unit._x000D_
In case of 1845: send valid configuration file to the alarming
1. Block/unblock the radio module to give a power-off reset to the antenna line devices._x000D_ device.
.1.IfUpload
that does thenot help,SW
correct replace
to thethe antenna
device line device.
(if possible) Note: if an
or perform theALDfaultpower
sourcereset
is RX/TX, replaceby
(for example theRFradio module.
blocking/unblocking)._x0
2. If thatthe
Update does SWnot to help,
the BTS. replace the antenna line device.
Check that the WCDMA master system module is connected to the system module when the SCF parameter "syncMaster" = "F
1. Check whether the heating element exists at all._x000D_
2.
"NotCheck
enough the radio
heaterresources
control connection and thatdisplayed
for cell detected." the heaterinisthe working._x000D_
alarm additional info:_x000D_
3. Replace
_x000D_ the alarming component.
Reset the MHA (by Radio Module block/unblock). If this does not help, replace the alarming module.
The cell might not be set up because not enough radio resources are detected._x000D_
Reset
Check MHA (by Radio
if all cables andModule block/unblock).
SFPs connecting the radioIn case this wont
modules to thehelp - replace
system module the alarming
(or to the module._x000D_
extension baseband module - FBBx
Alternatively,
1. recommission
Check the functionality of the
the BTSantennawith line fewer cells._x000D_
device._x000D_
_x000D_
1. Check the functionality of the antenna line device._x000D_
"Not
2. enough
Check
_x000D_ the DSP resources
compatibility for cellthe
between detected."
antennadisplayed line device in and
the alarm additional info:_x000D_
the BTS._x000D_
1.
If Check thebaseband
extension
_x000D_ functionality of the(FBBx)
module antenna is line device._x000D_
used:_x000D_
2. Check the compatibility between the antenna line device and the BTS._x000D_
_x000D_
1.Ensure
3.
1. Check the
_x000D_ all cables
thatfunctionality
the (Power
of the and
given parameters Baseband
are
antenna inline bus range.
cables) have been connected _x000D_
thedevice._x000D_
valid
2.
to Check
the
_x000D_ FBBx theunit._x000D_
compatibility between the antenna line device and the BTS._x000D_
3. Check that the given parameters are in the valid range.
_x000D_
Block and
2. Check the unblock
compatibility the system
between module._x000D_
the antenna line device and the BTS._x000D_
3.
3. Check that the
If this does
_x000D_ not given parameters
help, replace are inunit._x000D_
the FBBx the valid range.
_x000D_
3. Check that the given parameters are in the valid range.
If extension baseband module (FBBx) is not used:_x000D_
1.Block and unblock the system module._x000D_
1. Check the other active faults._x000D_
2.
1. Replace
Check the the alarming
other activemodule._x000D_
faults._x000D_
_x000D_
2. Replace the alarming module._x000D_
Flexi BTS FDD, Flexi BTS TDD:_x000D_
_x000D_
1. Check the GPS receiver installation._x000D_
Note! Perform the steps below in the listed order until the alarm disappears._x000D_
2. Check
_x000D_ the GPS receiver status._x000D_
Flexi
3. CheckBTSthe FDD, Flexi BTS
connection TDD:_x000D_
between
1.
1. Check
Confirm the cabling
if the current (connected
applied tothe SyncGPS
configuration In receiver and FSM._x000D_
interface)._x000D_
is within the configured RF HW capabilities._x000D_
_x000D_
Flexi
_x000D_ BTS FDD, Flexi BTS TDD:_x000D_
2.
1. Check
Flexi Zone
Verify BTS Micro connections
FDD, Flexi and
Zone commissioning
Micro theTDD:_x000D_ settings._x000D_the file if it is missing. Reset the FR module._x000D_
2. Check
Flexi
3. BTSififFDD,
Block/unblock
the
theHWP1 2.048
Flexi
the
file
MHz
BTS isreference
BTS._x000D_
present
TDD:_x000D_ insource FRismodule.
workingDownload normally and the 2.048 MHz signal is available._x000D_
1.
2.
1. Check
If
_x000D_ the file
Check the
that isGPS
present,
TEMP receiver
and CALI installation._x000D_
block/unblock files arethepresent
RF HWand unit._x000D_
upload missing file(s). Reset the RFbased
Module._x000D_
4.
2.
3. If HW
Instructions
Check
If the configuration
the
problem are
GPS divided
receiver
continues isinto
confirmed
threestep
status._x000D_
after as2correct,
sections.has been thisperformed,
Execute problem
the steps is caused
from the
replace bysection
the eNB
FR HW SW.
chosenCheck
unit._x000D_otheronactive
the bestalarms._x000D_
knowledge and comm
3.
2. Replace
If
_x000D_ the files the are alarming
present: module.
block/unblock FR HW unit._x000D_
_x000D_
Instructions
3. If the problem are divided
is into threeafter sections. 1Execute steps from section chosen based on best knowledge and common sense t
Flexi
Section
Flexi
_x000D_ Zone
Zone A: Micro
Check
Micro onstill
FDD,
FDD, theobserved
Flexi
system
Flexi Zone
Zone Micro
module step
Micro TDD,
replace
TDD:_x000D_
FR HW
Flexi Zone:_x000D_
side:_x000D_ unit._x000D_
_x000D_
1. Confirm
Replace if existing
Flexi applied configuration is within the configured RF_x000D_
1.
1. Check
Section
Flexi
HW Zone A:if Check
Block/unblock the connector
Micro
capabilities._x000D_ on Zone
the
FDD, BTS._x000D_
system
Flexi
Micro
seal is BTS.
module
Zone
properly
Micro
mounted and firmly in place.
side:_x000D_
TDD:_x000D_
_x000D_
2.
2.
1. Check
Instructions
Replace
Check if
ifBTS the
are Small
divided
theconnections
Flexi
connector Form
Zone into
seal Micro Factor
three
isand Pluggable
sections.
BTS._x000D_
properly (SFP)
Execute
mounted and is properly
steps from connected/mounted
firmly in place. _x000D_ section chosen based in the System
on best Module. and
knowledge If SFP connection/mo
common sense t
1.
2.
3. Block/unblock
Check
Check
_x000D_ if the LEDBTS._x000D_
indicates the commissioning
faulty SFP settings._x000D_
(connected to System Module). Replace the SFP if it is faulty._x000D_
_x000D_
2.
2.
3. Check
Flexi BTSifFDD,
Replace
Block/unblock the
the SFP Flexi
Flexi
the (Small
BTS Micro
Zone
BTS._x000D_ Form BTS._x000D_
TDD:_x000D_ Factor Pluggable) is properly connected/mounted in the System Module. If SFP connection/mo
4.
3.
1. Check
Section
Flexi
Check A:ifif Check
Zone:_x000D_
Block/unblock the
the optical
LEDthe RFcable
onindicates
system HW is properly
module
the faulty
unit._x000D_ connected/mounted
side:_x000D_
SFP (connected in the SFP._x000D_
to System Module). Replace the SFP if it is faulty._x000D_
_x000D_
4.
1. If
Flexi
5. HW
Clean
CheckBTStheconfiguration
ififFDD,
connector is
Flexiconnectors
optical BTS
seal confirmed
TDD:_x000D_
is that
properly then
are this problem
connected
mounted and to is
the
firmly caused
SFP.
in in place. by eNB_x000D_
Reset the RF
_x000D_ RF HW HW unit._x000D_
unit by using block/unblock procedures and ch
1.
4.
2. Block/unblock
Check
If
Flexi
SW.
1. the problem
Zone:_x000D_
Check
Block/unblock the
other Flexi
optical
continues
active
RF HW Zone
cablealarms. Access
is
after properly
unit._x000D_ step Point._x000D_
1 connected/mounted
has been performed, the
replace SFP._x000D_
the
_x000D_
2.
1.
2.
5. Check
Replace
Clean
_x000D_ if
Block/unblock
thethe the SFPRF
Flexi
optical (Small
HW
Zone
connectors Form
unit._x000D_
Access Factor
that Point.
are1, Pluggable)
connected is
to HWproperly
SFP.unit._x000D_ connected/mounted
Reset RF HW unit by block/unblock in the System Module. Ifand
procedures SFPcheckconnection/mo
if this sol
1.
2.
3. Block/unblock
If
Section problem
Check
_x000D_ B:if Check
the is LED Flexi
still
on Zone
observed
the
indicates radio Access
after
module
the step
faulty Point._x000D_
replace
side:_x000D_
SFP (connectedRF to System Module). Replace the SFP if it is faulty._x000D_
_x000D_
Flexi
1.
2. Zone
Block/unblock
Replace
_x000D_ Micro
the FDD,
the
Flexi RF
Zone Flexi
HW Zone
Access Micro
unit._x000D_
Point. TDD:_x000D_
1.
4.
2. Check
If
Section
1. Check
_x000D_ B:ifthe
problem connector
the
Checkis optical
stillon
connection seal
cable
observed
radio andis isproperly
properly
after
module
integrity step mounted
of1,
side:_x000D_
thereplace
antennaandRF
connected/mounted firmly
HW in
connector, place._x000D_
in
unit. the SFP._x000D_
cable, and antenna._x000D_
Flexi
2. CheckZone
BTS if Micro
FDD,
the FDD,
Flexi
Small BTS
FormFlexi Zone
TDD:_x000D_
Factor Micro
Pluggable TDD, Flexito
(SFP) Zone:_x000D_
is properly connected/mounted inthat
the isRF module.
5.
1.
2. Clean
Check
If there
problem
Check
the
if are optical
connector
more
continues connectors
than seal two
after is RF
step that
properlyunits
1 are
has connected
mounted
within
been the and
BTS,
performed, SFP.
firmly in Reset
replaceplace._x000D_
block/unblock RF
the HWRF
the
RF HW unit
HW byunit
unit.block/unblock causing theIf alarm._x000D_
procedures SFPand connection/mounti
check if this sol
1.
3.
2.
3. Check
_x000D_
Flexi
Check
ResetBTSthe ifthe
Block/unblock
if the
FDD,
the
configuration.
BTS SFP
the RF
optical
Flexi cable
BTS
(Small
device.
HW
If
_x000D_
isunit._x000D_
properly
TDD:_x000D_
Form
the Factor
alarm connected/mounted
Pluggable)
persists, replace is properly
the in the
BTS. SFP._x000D_ in the RF module. If SFP connection/mounti
connected/mounted
2.
4. Reset
If the B:
Clean BTS.
problem
the _x000D_
opticalcontinues
onconnectors after step
at the 1RFhas been performed,
module end. Resetinreplace the the RF unitHW unit._x000D_
Section
1.
3.
1.
3. if Check
Block/unblock
Check
Block/unblock
If
_x000D_ that does the not
the
optical
RF help,
radio
RF
HW cable HW
replace
module
isunit._x000D_
properly
unit._x000D_ the
side:_x000D_
Flexi connected/mounted
Zone Micro BTS._x000D_ theRF HW
SFP._x000D_ by using block/unblock procedures and check if th
_x000D_
1.
2.
4. Check
If the
Clean if
problem connector
theMicro opticalcontinues seal
connectors is properly
after step
at RF 1mounted
has
module been and firmly
peformed, in place._x000D_
replace the RF HW unit._x000D_
_x000D_
Flexi
1.
Section
2. Check
_x000D_ Zone
Block/unblock
C:if Check
the SFP FDD,
RF the HW Flexi
optical
(Small Zone
unit._x000D_
Form Micro
connection:_x000D_
Factor TDD, end.
Pluggable) FlexiResetis
RF HW unit by block/unblock procedures and check if this solves the
Zone:_x000D_
properly connected/mounted in the RF module. If SFP connection/mounti
_x000D_
2.
1. If problem
Replace
_x000D_ is still
the optical
Flexi observed
Zone Microafter BTS step 1, replace
orconnected/mounted
Flexi Zone RF HW
Access unit.
Point.
1.
3.
In Check
Flexi Zone
startup:
Section if the
Micro
Wait
C: Check FDD,
until thecables
cable
Flexi
alarm isare
Zoneis not
properlyMicro
canceled.overly
TDD, bent.
This FlexiIf
might they are,
Zone:_x000D_
take upinreplace
the
to 30 the optical cables since overly bending the optical fiber ca
SFP._x000D_
minutes._x000D_
2.
2. If problem
OPTIONAL: stillofobserved
is Test optical connection:_x000D_
the fiber after
cable step
(for 1,Flexi
replace
example, RF
measure HW RF unit.
the optical attenuation)
4.
1. Clean
Replace
_x000D_
1. Check the
if the optical
optical Flexi
Flexi BTS FDD, Flexi BTS TDD:_x000D_ connectors
Zone
cables Micro
are not at
BTS RF
over module
or
bend. If end.
Zone
yes, Reset
Access
replace HW
Point.
the unit
optical by
cable sincefrom
block/unblock overthe System
procedures
bending theModule
and
optical end.
check
fiber if Check
this
cables the
solves mea
the
damage
3. OPTIONAL:
_x000D_
If
2.
1. the alarm
OPTIONAL:
Block/unblock is Test
not
Test the fiber
canceled:_x000D_
thethe RF fiber
HW cable
cable
unit._x000D_(for example, measure the optical attenuation)
(for example, measure the optical attenuation) from System Module end. Check measuring efrom the RF Module end. Check the measurin
Flexi
_x000D_
Section
check BTS
if C: FDD,
Check
environment Flexi
ofthe BTS
optical
temperatureTDD:_x000D_
connection:_x000D_
is within design limits for radio module._x000D_
3.
2.
1. OPTIONAL:
If the problem
Block/unblock Test
still
RF fiber
persists
HW cable
after
unit._x000D_ (for
step example
1 has beenmeasure
performed, the optical
replace attenuation)
the RF HWfrom RF Module end. Check measuring equip
unit._x000D_
If
1. the
WhenCheck
Flexi
_x000D_ alarm if
environment
BTS still
optical
FDD, persists
Flexicables
temperature
BTS after
are executing
not
TDD:_x000D_ isover
out ofthe
bend. steps
limits If yes
thenfrom
then
alarmsections
replace
is A,
expectedthe B,optical
and
andC,no replace
cable since
further the RF bending
over
actions module._x000D_
are needed. the optical fiber cables dam
2.
1. If
_x000D_
2. problem is Test
OPTIONAL:
Block/unblock still
the observed
theRF fiber
HW after step
cable
unit._x000D_(for 1, replacemeasure
example, RF HW unit._x000D_
the optical attenuation) from System Module end. Check measuring e
If alarm
Flexi
_x000D_ Zone
BTS is still
Micro
FDD, observed
FDD,BTS
Flexi after
Flexi executing
Zone
TDD:_x000D_ Microsteps TDD:_x000D_from sections: A,B,C replace the RF module._x000D_
3.
2.
1. OPTIONAL:
If the problem Test the
continues fiber cable
after step (for 1 example,
has been measure
performed, the optical
replace attenuation)
the RF HW from RF
unit._x000D_ Module end. Check measuring equip
1. Check
Flexi
Check
_x000D_ Zonethe
Instructions if Micro configuration
are divided
environment FDD, Flexi into and
three
Zone
temperature download
sections.
Micro updated
Execute
TDD:_x000D_
is within design configuration
the
limitssteps for from
radioif required._x000D_
the section
module. chosen
When based ontemperature
environment best knowledge is out and common
of limits then
2. Block/unblock
_x000D_
1. Block/unblock
_x000D_ the
the BTS._x000D_
Flexi Zone Micro BTS or from
the Flexi Zone A,B,C Access Point._x000D_
If
1.
3. alarm
Flexi Zone is
Block/unblock
Replace
Section still
Micro
thenotobserved
FDD,
RF
BTS. HW after
Flexi executing
Zone
unit._x000D_ Micro steps
TDD, Flexi sections:
Zone:_x000D_ replace the RF module._x000D_
2.
1. If thatA:
Check
Replace
_x000D_ if Check
does airflow
the Flexi
on
help, thereplace
is Zone
not systemthe
blocked
Micro
module
by Flexi
BTS some side:_x000D_
Zone
objects
or Flexi Micro
Zone BTS orRemove
orAccess
walls. the Flexi
Point. any Zone
objectsAccess Point.airflow and mount module according to
blocking
1.
No Check
action
_x000D_ if is the connector
needed. seal is properly mounted and firmly in place. _x000D_
2.
2. If problem is Small
still observed after Pluggable
step 1, replace RF is HW unit. connected/mounted in the System Module. If the SFP's connecti
3. Check
1. Check ifif the the fan or Form
excessive sunlight
air flow Factor
isisblocked
causingby any (SFP)
overheating. object. properly
Install
Remove sunshield
any objects following mounting
that might instructions
be blocking the fanandor recommendations.
air flow._x000D_
3.
2. Check
Check ifif the
the LED
fan indicates is
connector theproperly
faulty SFP mounted.(connected Mount tothe System
fan Module).properly._x000D_
connector Replace the SFP if it is faulty._x000D_
1.
4. Check
Check ifif the fan
thecontinues,
optical or air cable flowisisproperly
blockedconnected/mounted
by any object. Remove in the any objects that might be blocking the fan or air flow._x000D_
SFP._x000D_
3.
2. If the alarm
Check ifif the fan connector resetisthe radio mounted.
properly module byMount using the block/unblock._x000D_
fan connector
5.
1.
4. Clean
Check
If alarm the the optical
continues,fan or connectors
air
replaceflow is
the that
blocked
fan are connected
by
module. any object.to the SFP.
Remove Reset
any the RFproperly._x000D_
objects_x000D_ HW unit by using block/unblock procedures and ch
3. If
_x000D_
that the
might alarm be continues,
blocking the reset
fan orthe air radio module
flow._x000D_ by using block/unblock._x000D_
1.
4. Check
If the B: if thecontinues,
alarm fan or air flow replaceis blocked
the fan by any object. Remove any objects that might be blocking the fan or air flow._x000D_
module.
Section
2.
2. Check
Check ifif Check
the
the fan
fan on the radio
connector
connector is
is module
properly
properly side:_x000D_
mounted.
mounted. Mount the the fan connector_x000D_
1.
1. Check
Check
properly._x000D_ifif the
the environmental
connector seal temperature
is properly is withinMount
mounted the design
and firmly
fan
in limitsconnector
of the radio
place._x000D_
properly._x000D_
module. If the environmental temperature is be
3. If
_x000D_ the alarm continues, reset the radio module by using block/unblock._x000D_
2.
3.
1.
4. If the
Check
If alarm
if
the alarm the Small
continues,
environmental
continues, Form Factor
reset
replace the Pluggable
temperatureradio
the fan module
is
module. (SFP)
withinby is
the properly
using design connected/mounted
block/unblock._x000D_
limits of the radio in the IfRF
module. themodule.
environmentalIf SFP connection/mounti
temperature is ou
2.
3.
4. Check
Check
If
_x000D_ the ifif the
alarm the air flowcable
optical
continues, is not is
replaceblocked
properly
the byconnected/mounted
fan any
module.object or walls. in Remove
the any_x000D_
SFP._x000D_
1. Check
objects if the environmental temperature is within the designaccording limits of the radio module. If the environmental temperature is ou
4.
2. Cleanthat
Check
_x000D_ the
if the might
optical beconnectors
air flow blocking
is not blocked air atflow
theby and
FR any mount
objectthe
module end.ormodule
ResetRemove
walls. the FR HW tounit
instructions
any_x000D_ by using and recommendations._x000D_
block/unblock procedures and check if th
_x000D_
Instructions
_x000D_
objects that are
might divided
be into three
blocking air sections.
flow and Execute
mount the steps
module from the section_x000D_
according to instructions and recommendations._x000D_
2.
3. Check
Checkbased if air flow is not blocked by any object or walls. toRemove any_x000D_
chosen
Section
_x000D_
Instructions
objects C:if Check
that
excessive
are
might
on best
the
divided
be
sunlight
knowledge
optical
into three
blocking
is causing
and
connection:_x000D_
air sections.
flow and
overheating.
common Execute
mount
sense
the
Install
steps
module
minimize
fromsunshield,
thethe
according
following
cost
section_x000D_ mounting instructions and recommendations.
and_x000D_
to instructions and recommendations._x000D_
time
1. effort. _x000D_
the optical cables are not overly bent. If they are, replace the optical cable,
3. Check
chosen
_x000D_
1. The VSWR
_x000D_
if excessive
based measured sunlight
on best knowledge is
at the RFand causing overheating.
common exceeds
(transmitter) Install
sense to values minimizesunshield,_x000D_
that the arecost and_x000D_
acceptable by since
the RF overly
module. bending_x000D_the optical fiber cab
2. OPTIONAL:
following
time
3.
2. Checkeffort.mounting
ifthe_x000D_ Test
excessive the fiber
instructions
sunlight cable and
isand (for
causing example,
recommendations.
the overheating. measure Install the optical
sunshield,_x000D_ attenuation) from the System Module end. Check the mea
Section
1.
3. Check
OPTIONAL:
_x000D_ A:the Checkimpedance
BTS Test on thesystem
connections matching
fiber module
cable
of
(for
Antenna Line
side:_x000D_
commisionning
example, measure
System
settings._x000D_
the
(replace elements that cause mismatch)._x000D_
optical attenuation) from the FR Module end. Check the measurin
following
3.
1.
2. To
Checkcheck mounting
ifthat
Block/unblock if the
the connector
the instructions
above-mentioned
BTS seal
(using isand recommendations.
thesteps
properlylocal have
mounted
BTS Site solved and
Managerthe problem,
isproperly
firmly block/unblock
inconnected
connection place. if_x000D_
a remote the RF module._x000D_
connection is not possible).
_x000D_
Section
1. Check
_x000D_ A: Check the on
Small system Form module
Factor side:_x000D_
Pluggable (SFP) is in the System Module._x000D_
2.
If Check
the alarm ifif the small
continues form-factor
after is pluggable (SFP) isand properly connected/mounted_x000D_
1.
1.
in
Check
_x000D_
Note:
Check
the Forcing
systemthat the theconnector
the
module. RF HW
Small If Form
thetoexecuting
seal work
Factor
SFP's
properly
under steps
such
Pluggable from
mounted
connection/mounting
sections
conditions
(SFP) isisis A, B,
firmly
might
properly
not
and
result
correct,
C,inreplace
inconnected
place. _x000D_
permanentin the
the FR
readjust_x000D_
module._x000D_
damage
System to the RF HW.
Module._x000D_
_x000D_
2. Check
Replace
_x000D_ if the small
SFP form-factor
module. pluggable (SFP) is properly connected/mounted_x000D_
the
1.
Flexi
in theconnection/mounting._x000D_
CheckZone
systemthe Microstatus FDD, of the
IfFlexi module
Zone Micro behind the faulty link
TDD, Flexi Zone:_x000D_ (power on, and so on)._x000D_
2.
3. Replace themodule.
SFP module. the SFP's connection/mounting is not correct, readjust_x000D_
theCheck
_x000D_
1. Replace
Reset if the
the the RFLED
BTS.
connection/mounting._x000D_
Module indicates behind that thethe SFPoptical
faulty is faulty (connected
interface to system module)._x000D_
by blocking/unblocking it._x000D_
Replace
2.
3. Check
Check
_x000D_ the
the
if theSFP
Small
LED if it
Formis faulty._x000D_
indicates Factor that Pluggable
the SFP (SFP)
is faulty from both
(connected ends to (the
system System Module and the module behind the faulty link). Th
module)._x000D_
1.
4. Exchange
Check if the the alarming
optical and working links, and check where the SFP._x000D_
alarm is reported now._x000D_
_x000D_
Replace
2. the
If that does
_x000D_ SFPnot it iscable
ifclear is properly
faulty._x000D_
the fault situation, connected/mounted
replace the RF Module in the that causes the alarm._x000D_
5.
3.
1.
4. Clean the
Exchange optical
connectors,
the alarmingconnectors test
andisthe that
fiber
working arecable,
connected
links, to thewhere
replace
and check itSFP. Reset
ifinit the
is
the the is
faulty._x000D_
alarm RF HW_x000D_
reported now._x000D_
2. Check
_x000D_
unitIf by
_x000D_
if the
theblock/unblock
alarming optical cable
link remains
procedures
properly
the same,
and
connected/mounted
checkreplace thisthe
ifand System
solves the Module._x000D_
SFP._x000D_
problem._x000D_
5.
3.
1. Clean
Reset
Exchange
_x000D_ the optical
System
the alarmingconnectors
Module._x000D_
and that
working are connected
links, to
check the SFP.
where Reset
the alarm the isRF HW_x000D_
reported now._x000D_
_x000D_
4.
2.
unitIf by
_x000D_ previous steps
theblock/unblock
alarming link remains do not the
procedures help, replace
same,
and check the
replaceif module
thisthe System
solves behind
the the faulty link.
Module._x000D_
problem._x000D_
3. If the B:
Section
_x000D_ alarming
CheckModule link
on radio changes, module replace the module behind that link.
side:_x000D_
_x000D_
4.
2. System
If the alarming link remainsis the onlysame,
the source causing
replace thethe alarm,Module._x000D_
System or if the actions mentioned above do not clear the fault situation,
1.
3. Check
If
Section
_x000D_ the B: if Check
alarmingthe connector
link
on radio changes, seal
moduleisreplace
properly themounted
side:_x000D_ module and behind is firmly
that link. in place._x000D_
2.
3. Check
1. If
Check if the small
if the connector
the alarming form-factor
link changes, seal isreplacepluggable
properly (SFP)
themounted
module and is properly
behind is firmly connected/mounted_x000D_
that link. in place._x000D_
in
2. the
Check RF ifmodule.the small If the SFP's connection/mounting
form-factor pluggable (SFP) is properly is not correct, readjust the_x000D_
connected/mounted_x000D_
connection/mounting._x000D_
in the RF module. If the SFP's connection/mounting is not correct, readjust the_x000D_
1. Exchange the alarming and working links, and check where the alarm is reported now._x000D_
_x000D_
Check the alarms for the connected module.
2. If the alarming link remains the same, replace the System Module._x000D_
1. Check the cables between the System Module and the RF Module._x000D_
_x000D_
_x000D_
3. Check
1. If the alarming
the cables linkbetween
changes,the replace
System theModule
moduleand behind
the RF thatModule,
link. the cable between the FBBx Module and the RF Module,
2. Reset the alarming System Module._x000D_
_x000D_
1. Check the cables between the System Module and the RF Module, and the cable between the FBBx Module and the RF Mo
_x000D_
2. Replace the unit that causes the alarm (System Module or FBBx).
_x000D_
3. Reset
Check thethe site._x000D_
antenna mapping to the local cells in the commissioning file.
2. Reset the System Module._x000D_
_x000D_
1. Check the RP3-01 cable between the synchronization master and synchronization_x000D_
_x000D_
4. Replace
slave system themodules._x000D_
alarming System Module.
3. Check
1. Replace the the alarming
RP3-01 cable module
between (System Module).
the synchronization master and synchronization_x000D_
2. Check
slave system the alarms
modules._x000D_ in the synchronization master system module and act accordingly._x000D_
1. Reset
3. Check the the status of the module behind themodule._x000D_
faulty link (power on, and so on)._x000D_
2. Check the synchronization
_x000D_ alarms in the synchronization master system master system module and act accordingly._x000D_
1.
3. Switch
Reset to the recently active BTS configuration._x000D_
2. Check the
_x000D_ the synchronization
alarming fiber connection. master system module._x000D_
If OptIf is the source:_x000D_
2. Retry the SW update.
_x000D_
If OptIf is the source:_x000D_
1. Check antenna mapping to the local cells in the commissioning file._x000D_
_x000D_
1. Check
2. Block/unblock the between
BTS._x000D_
1. Check the
_x000D_ antennacables mapping to the the System
local cells Modulein theand RF Module or
commissioning the cable between the FBB module and the RF Module (it
file._x000D_
3.
1.
2. Perform
Block/unblock
Check theblock/unblock
cables the BTS.
between on the
_x000D_ RF
the System Module._x000D_
Modulerelated and RF
2.
4. Check
Perform
_x000D_ loga for
BTS line code
reset. violation
_x000D_ (LCV) errors to Module or the_x000D_
optical links. cable between the FBB module and the RF Module (it
3.
1. Perform
Block/unblock
_x000D_ block/unblockthe BTS. on the
_x000D_ RF Module._x000D_
5.
2.
4. Replace
Check
Perform theathe RF module
configuration.
BTS behind the optical link._x000D_
_x000D_
3. Verify
Note:
_x000D_ SFP
Perform the reset.
(small steps _x000D_
form-factor
below inpluggable the listedtransceiver)
order until the andBTS fiberfault
conditions.
disappears._x000D_
5.
2. Replace
Check
_x000D_ the the RF module
baseband busbehind
configuration the optical relatedlink._x000D_
to RP3 link speeds.
If FSP
Note:
_x000D_ is the source:_x000D_
Perform the steps below in the listed order until the BTS fault indication disappears._x000D_
Flexi BTSthe
Perform FDD, Flexi BTSBTS TDD:_x000D_
1.
If
1.
Check
FSP
Note:
Reset is the
Performthea System
System
other
source:_x000D_
the steps Module
active below
Module._x000D_
reset._x000D_
faults
in the and listed actorderaccordingly._x000D_
until the BTS fault disappears.
2.
1. If
Makethat
Perform does
sure a not
that
System help,
the replace
plug-in
Module type the System
baseband
reset._x000D_ Module.
unit is installed correctly._x000D_
2.
3. Replace
Note:
Reset Performthethe System
the
alarming steps Module._x000D_
below inunit._x000D_
baseband the listed order until the BTS fault disappears.
2.
1. If that does
Block/unblock
_x000D_ notRF help,HW replace
unit. the System Module._x000D_
4. Replace
Note:
_x000D_ Perform the the alarmingsteps belowbaseband in the unit.
listed order until the BTS fault disappears._x000D_
Flexi
1. Check
_x000D_ Zoneif Micro fan or FDD, air flow Flexi Zone Micro
is blocked by some TDD:_x000D_
objects. Remove any blocking
If
2. FBB
If
Flexi
1. Reset
objects. is
problem
BTSthe the
FDD, source:_x000D_
is still observed
Flexi BTS TDD:_x000D_
BTS._x000D_ after step 1 replace RF HW unit.
1.
1. Check
Perform
Depending theafaninstalled
onSystem
the HW/SW
Module
installed and version
reset._x000D_
commissioned compatibility and the HWsource(s)
synchronization compatibility listedwith the current
in section BTS configuration._x000D_
"Meaning", see the commissioned syn
2. Replace
Check
Flexi
_x000D_ BTSifFDD, the Flexi
connector
Flexi Zone
BTSisMicro properly
TDD:_x000D_BTS.mounted. Mount fan connector properly.
2.
If If
_x000D_
3. If
FSM that
alarm doesis still
is fault not
source help,
observed andreplace
then
other the
reset
alarms FBB radio card.
are module
reported by- recommission
block/unblock. thesystem
BTS with the correct number of cells per BTS_x000D_
2. Check
Reset
GPS that
(block/unblock)
receiver the
(PPS BTS cellBTS._x000D_
the parameters
source):_x000D_ from the Network management match_x000D_
4.
If
the If
FR alarm
is fault is still
source observed
- correct thenthe replace
cables the fan
connection module.to be consistent with site configuration file. There shall be cable between FS
1. IfBTS
Software
_x000D_ thereHW is aconfiguration
and GPS receiver
hardware can(for be example,
commissioned
reconfigured frequency,
atforthetheBTS power)._x000D_
setup site,where
note the following:
faulty TX isIf not the used._x000D_
GPS receiver is not locked to any satellite,
_x000D_
installation
The cells will(poor
then sky visibility).
operate For this,
in single mode theunless
only permanent
all the TX'scure related is totochange
the properthe GPScell areantenna location. One indication of a fai
faulty._x000D_
_x000D_
Flexi
3. CheckBTSthe FDD, NetworkFlexi BTS TDD:_x000D_
management system alarms for the alarming local cell (LCR)._x000D_
_x000D_
Check
Flexi
Define the
Zonea other
Micro
valid TX active
FDD,
power BTS
Flexi
level faults
Zone
value and
Micro
in act
the accordingly.
TDD:_x000D_
radio network (RNW) configuration part of the site configuration file (SCF) and use th
_x000D_
Flexi
2. ThereBTSmight FDD,be FlexiaBTS BTS TDD:_x000D_
malfunction in the GPS receiver. Perform a (remote) power reset for the GPS receiver._x000D_
Recommission
_x000D_
4. Recommission
Perform the steps the the
below with
BTSinto the
theensure correct
listed that order number
alluntil of
parameters LCRs
the fault are per RF Module.
correctly Ifconfigured.
disappears. after autonomous GPS power reset, the fault does not g
_x000D_
Replace
Flexi Zone theMicroalarming FDD,unit. Flexi Zone Micro TDD:_x000D_
_x000D_
3. There might be a malfunction in the BTS. Perform a BTS site configuration
reset._x000D_
Define
Flexi
Control BTS aInterface
valid
FDD, TX power
Flexi
not BTS level value
TDD:_x000D_
available:_x000D_ in the radio network (RNW) file and use the commissioning wizard in the BTS
_x000D_
Note! Perform the steps below in the listed order until the fault disappears._x000D_
1. The
Flexi
4. TheBTS BTS
GPS FDD,has
cable detected
Flexi a malfunction
BTSconnectors
and/or TDD:_x000D_ in the control interface of the GPS
might be damaged. Check the cable and the connectors._x000D_ receiver. A possible reason is that the BTS and the G
_x000D_
2.
1. Perform
Reset the a (remote)
System BTS
Module site
that resetis for
causing the whole
the BTS._x000D_
alarm._x000D_
_x000D_
1.
1. Check
Reset the BTS._x000D_
the fault name of the toggling BTS fault._x000D_
3.
2.
5.
2. Perform
Replace
There
Follow theathe
might power System
be aifreset
instructions HW for
Module
fault the
of the whole
in that
the
togglingGPS BTS._x000D_
is causing receiver.
BTS the Check
fault alarm._x000D_
to clear the
the operation
problem._x000D_ and change the HW, if needed._x000D_
2.
1.
4. Replace
Check
The cable in the
NetAct faulty
between module._x000D_
autoconfiguration
the GPS receiver isand enabled
the and
BTS if the
might required
be working license and commissioning
incorrectly. Check file of
aretheavailable._x000D_
_x000D_
_x000D_
Note!
_x000D_
2. Check Detailedthe information about
autoconnection/autoconfiguration the toggling frequency
information can be
with found
BTS in
Site alarm history
Manager._x000D_ file,ifwhich
the pins can be connectorsusing
downloaded (on both
BTS
5. TheBTS
Flexi
External cable
Zone FDD,
2.048MHzbetween
Micro FDD,
Flexi the
BTSFlexi GPS Zone receiver
TDD:_x000D_
signal:_x000D_ Micro and the BTS might be faulty. Check the situation and change the cable, if needed._x00
TDD:_x000D_
Flexi
3.
6. Load
ThereZone the Micro
might correctbe FDD, Flexi
faultZone
commissioning of Micro
file toTDD:_x000D_
the BTS. Check
1.
1. Reset
Check
If
There
1.
and
there
Replacemight the
isthe
an
be twoathe
BTS._x000D_
correct external
BTS.
HW contents
reasons 2.048MHz in the
for the GPS
the
signal
fault:_x000D_receiver.
commissioning
source commissioned the operation
file._x000D_ at the BTS and change
site, check the the
GPS BTS module,
faults ifofneeded._x000D_
that device and act acc
7.
2. There
Replace
_x000D_
further
1. The mightthe
actions._x000D_
radio unit be
BTS. a
that HW shouldfault in
only the be BTSconnected System Module.
to LTE Check
Flexi System the operation
Module is and
also change
connected the System
to WCDMA Module,
system if needed._x000
module. _x00
Flexi
_x000D_
Flexi BTS
Zone FDD,
Micro Flexi
FDD, BTSFlexi TDD:_x000D_
Zone Micro TDD:_x000D_
_x000D_
In
1. this case,
Block/unblock disconnectthe alarming the radio unit
module._x000D_ from the WCDMA system module._x000D_
_x000D_
1.
2. Check is
Reconfigure
There and
mightanthecorrect
befrequency
error a in the
thecontents
malfunction settings in of
commissioning inthe
the aBTS. commissioning
proper way with
Perform
file._x000D_ a BTS file._x000D_
respect to Radio Module capabilities.
site reset._x000D_
_x000D_
Flexi
_x000D_ Zone Micro FDD, Flexi Zone Micro TDD:_x000D_
_x000D_
In this
Check
2. If FSPcase, create
theorconfiguration the fault
commissioning
of the configured filecell.
with theorcorrect relation system If module - radio
is theunit and send the file tosystem
the BTS. Note
Perform
2.
FTM Recommissionthe FBB
reference steps isthe
(TDM,
the
belowBTS
SyncE
source,
inwith
the orlisted
the
ToPvalid
perform
order
as
FSP
until
commissioning
source):_x000D_
FBBfile.
the fault reset recovery.
disappears._x000D_ FCM/FCT fault source, perform module
_x000D_
To be
_x000D_ performed on the master RAT side:_x000D_
1.
3.
1. If
Ifbethere
steps
Check is
the an
1 and integrated
antenna 2on dothe not
line transmission
help, replace
and antenna unitalarming
the
line (FTM) commissioned
device causes theatalarm._x000D_
module._x000D_
that the BTS site, note the following: The FTM unit operates so
Control
To
the FTM Interface
performed
synchronization not available:_x000D_
MasterRAT
priority side:_x000D_
setting) might be missing, causing the FTM's internal clock to drop to holdover mode. In this ca
_x000D_
2.
1. Fix
The
Check orBTS replace
the has
antenna the faulty
detected lineaand parts/devices._x000D_
malfunction
antenna in antenna
line the control
device thatinterface
is causing ofFix the
the GPS receiver.
alarm._x000D_ A possible reason is that the BTS and the G
_x000D_
1. Check
_x000D_
3. Perform thea RS485
radio IUANT
module interface
reset (onlyfor and
thethe master RATline devices. or
in sharing mode can request replace the faulty
for suchparts/devices._x000D_
an operation to be performed).
2.
2. Perform
Fix
Check or
TheZone alarm a
replace
the (remote)
alarms
isthe the
canceled ofBTS
faulty
the site
FTM
onlyZone reset
parts/devices.
when unit and
the RFact whole BTS._x000D_
accordingly._x000D_
Module is reset or ifdisappears.
the BTS is _x000D_ reset.
Flexi
Note!
3. Perform
Perform Micro
a power FDD,
steps
reset Flexi
below
for theinwhole Micro
the listed TDD:_x000D_
order
BTS._x000D_ until the fault
_x000D_
1. Block/unblock the BTS._x000D_
_x000D_
4. There
Replace might
parallel beRP3-01/CPRI
a HW fault in the GPS
fiber linksthe Receiver
toward oneor radio
the BTS. Replace
module so that thetheFlexi Zone Micro
maximum mutual BTS.length difference between fiber
3. Check
Performthe synchronization settings the of
2. a power-off reset. _x000D_ FTM unit._x000D_
1. Check
synchronization the fans and ensure
master system that
module. ambient temperature on the site is acceptable. _x000D_
_x000D_
1.
3. Check the fan
2. stepsdoes
If that 1 and not2and do the
help, not connector._x000D_
help, replace
replace the alarming the module module. that is causing the alarm.
4. There
2. Replace mightthe be
fan. a malfunction in the BTS. Perform a BTS site reset._x000D_
Perform the steps below in the listed order until the fault disappears:_x000D_
_x000D_
1. Either
1. There
Check might enable
the fans the parameter actDistributedSite or switch toona the shorter fiber between the FSM and FR._x000D_
5. be and ensure that
an equipment the ambient
failure in the FTM temperature
unit. Check the operation site is acceptable._x000D_
and replace the unit, if needed. Note: Normally, the
2.
2. Restart
If that does the FSM.
not (frequent
help,
indication
1. Check activity
that the fan is replace
not BTS the
fault
blocked._x000D_ alarming
indication module.
activations/cancels instead of a stable BTS fault indication state) points to the in
_x000D_
2. Check that the fan connector is properly mounted._x000D_
If the
3. previous
If that does not steps help,do replace
not help,the therefan.might be an equipment failure in the System Module. Check the operation and if perform
_x000D_
_x000D_
_x000D_
Flexi Zone Micro FDD, Flexi Zone Micro TDD:_x000D_
1. Check if the fan is not blocked._x000D_
2. Checkthe
Replace if the fan connector is properly mounted._x000D_
fan(s).
3. If that does not help, replace the fan.
If the BTS is not automatically updated by the NetAct: Update the BTS SW with the SW version running on the BTS before the
If the BTS is not automatically updated by the NetAct: Update the BTS SW with the SW version running on the BTS before the
If the BTS is not automatically updated by the NetAct: Update the BTS SW with the SW version running on the BTS before the
Update the BTS SW, unless it is automatically updated by NetAct.
1. Check the other active alarms and act accordingly._x000D_
2.
None If that does not help, block/unblock the system module._x000D_
3. FSMr2: If that does not help, replace the system module._x000D_
FSM is fault
FSMr3: If thesource:_x000D_
faulty cell is on the baseband extension module, replace the extension module.
1.
Check Reset thethe System
optical Module (note
connection between that the all cells,
master even andthose peer thatsystem are modules.
also operational, will be reset)._x000D_
2. If a reset does not resolve the fault situation, replace the System Module._x000D_
1. Wait for start-up to be completed if a synchronization master system module has been reset._x000D_
_x000D_
2.
FBB
Flexi If there
is
BTSfault is
FDD, 1858: EFaultId_FaultyFcmConfigurationAl
source:_x000D_
Flexi BTS TDD:_x000D_ after synchronization slave's recovery reset, check the RP3-01 cable be
3.
1. Check
Reset the
Perform the
the steps alarms
System in
below the
Module in synchronization
(note that master
all cells, even system those module
that areand alsoact accordingly._x000D_
operational, will be reset)._x000D_
Perform
4. Reset the
thedoes steps below
synchronization in the
the listed
listed
master
order
order
system
until
until the
the
module.
fault
fault disappears._x000D_
disappears._x000D_
2.
Not If
_x000D_ a reset
tracking not resolve
satellites:_x000D_ the fault situation, replace the FBBx module._x000D_
Perform
OR_x000D_
1. The most the steps common below reason in the forlisted orderindication
this fault until the fault is that disappears._x000D_
the GPS antenna installation has not been done properly, that is, the
Survey
_x000D_ in progress:_x000D_
1. Replace
antenna
Perform
1. Do has
the
nothing. the a
steps FBBx belowmodule.
The alarm is informative only. Normally, the GPS by
good sky visibility,
in the listedthe problem
order until might
the be
fault caused
disappears._x000D_installing
receiver runsthe theGPS survey antenna
for twotooreasons:
close toa) the transmitter
somebody anten
has star
No
2.
_x000D_ stored
There might position:_x000D_
be a malfunction in the GPS receiver. Perform a (remote) power reset for the GPS receiver._x000D_
time
Perform
1. during the first
One ofquestionable:_x000D_steps
the GPS start-up._x000D_
below
receiver in the listed
settings order
is incorrect.until the
Using fault disappears._x000D_
thethe manager SWand of the GPS the receiver, module,
set the receiver to store the positi
3. There
Position
2. Ifrevert might
the isautomatic be asurveyHW fault takes in the
place GPS every receiver.
now and Check then, operation change that GPS if needed._x000D_
_x000D_
If
Tothere
_x000D_
1. The GPS noreceiver
changes, tick mark DC has in the
Voltage
valid position
should
position storage
be
data enabled
butselection,
it isfor not the itGPS
reporting
properly
might be an
receiver
Antenna
in line
indication
runs
Line.
with the the site/self
information
thesurvey
sky visibility
estimated everyfrom
is
timepoor
thethe and
GPS
actual
according
receivervt
satellite
install
EEPROM
installation the GPS a antenna._x000D_
invalid:_x000D_
is poor one - the GPS receiver turns the PPS reference OFF every now and then during the site survey. This mean
Flexi
instructions
To
3. The
1. Zone
Ifrevert
the GPS
GPS changes,Micro
and ifFDD,
there
the
installation
receiver has Flexi
are
parameter
is Zonebut
deviations
good
detected Micro
thewithTDD:_x000D_
the actual
Communication3gppEnabled
automatic
a malfunction theinstallation,
in survey EEPROM must
still takes re-install
memoryplace ofthe
be enabled theGPS
every for antenna.
now
GPS the
and then,Note
reporting
receiver. that
Antenna
there
Perform mighteven bewhen
Line.
a (remote) the GPS
a malfunction
power an
in
reset
Perform
_x000D_
4.
2. There
Trigger the
If the aactions
might
SW update steps be below
detailed
a HW for in in
fault
BTS the
thein listed
toprevious
the
the GPS ordersteps
requested until
receiver.dothe
SW not fault
Check
version. disappears._x000D_
correct thethe situation,
operation andtherechange might thebeGPS a HW fault inifthe
module, GPS receiver. Check
needed.
NotThere
2. tracking might satellites:_x000D_
be a malfunction in the GPS receiver. Perform a (remote) power reset for the GPS receiver._x000D_
Depending
1. There
3. The most might on the
commonbe ainstalled
HW reason fault and in commissioned
for thisGPS
the faultreceiver. synchronization
indication is thatthe
Check source(s),
theoperation
GPS andsee
antenna the commissioned
installation
change the GPS has not synchronization
been
module, ifdone
needed.properly,option
thatbelow
is, the
_x000D_
antenna
Fault 4180 is raised if switch setting is not succesfull. After fourth try a group fault 3003 is raised. If there are other workinganten
has a good sky visibility, the problem might be caused by installing the GPS antenna too close to the transmitter cells
GPS
2. There receiver
might(PPS be astepssource):_x000D_
malfunction inthethelisted
GPSorder receiver. Perform adisappears._x000D_
(remote) power reset for the GPS receiver.
Note: Perform the
1. Check the GPS receiver installation._x000D_ below in until the fault
1) Verify
_x000D_
Check theif the transportIP address related is configuration
properly configured (C-Plane at theaddress, BTS._x000D_U-Plane address, Transport network id). If the fault was raised at s
2)
2. Verify
Check if the the Real-time
GPS receiver Performance
status._x000D_ Management entity is operational and available._x000D_
1.
3) One
If theofabove the most havecommon been verified, reasons thefor this fault
operator can indication
reset the(especially
BTS at a suitable occasional time.indications) is that the GPS/GNSS antenna i
_x000D_
the GPS/GNSS antenna. Note that even when the GPS/GNSS antenna has a good sky visibility, the problem
The
3. PHICH (Physical HARQ Indication Channel) transmission power boost can be increased by reducing the might be caused
configured boosts
2. Check
Check the the connectionother possible between
alarms/fault the GPS receiver
indications and
of theFSM._x000D_
GPS/GNSS receiver and BTS and act accordingly._x000D_
_x000D_
Perform network optimization.
3. There might be a malfunction in the GPS/GNSS receiver. Perform a (remote) power reset for the GPS/GNSS receiver modul
FTM
4. If
1) Check reference
there the is only (ToP
GTP-U the as path source):_x000D_
alarming GPS/GNSS
supervision receiver connected
configuration of the eNB.to_x000D_ the GPS/GNSS antenna, check the antenna power feeding se
1.
of
2) Check
the
Check other the
the signal
receivers
supervised is being
is recieved
OFF)._x000D_
network element from for theproper
ToP Master._x000D_
operation._x000D_
Note:
_x000D_ Perform the steps below in the listed order until the alarm disappears:_x000D_
5.
3)
1. Check
Check the
the connectioncommunication
connection between
with equipment
MME, GPS/GNSS in between receiver thethe module
eNB S1and andtheGPS/GNSS
supervised antenna. Note that one antenna might be share
network element._x000D_
2. Check
Note: Perform
receiver. the
_x000D_ FTM status._x000D_
the steps below in thebased listed on orderwhether
until the BTS link
faultisdisappears:_x000D_
broken accordingly._x000D_
2. Check
_x000D_
1.Check theif the MME
connection is operational._x000D_
with adjacent
6.
1.
3. Perform
Check
Check whether
ififthe athe local/physical
speed the and transport power
duplex path resetisBTS,
setting forofthe
based
alive._x000D_
the eNB
on whether
alarming S1 port GPS/GNSS the X2receiver
is consistent
link is broken respectively._x000D_
withmodule._x000D_
the switch port that is connected directly to the eN
3.
2.
7. Check
There might the synchronization
adjacent
be asteps HW below BTS
fault settings
is of
operational._x000D_
ininthe the FTM unit.
2. Check
_x000D_
Note:
_x000D_ Perform the configuration
the of transport theGPS/GNSS
listed orderantenna
addresses theand/or
at MME._x000D_
until BTS fault possible antenna line splitter, possible line amplifier or lightning
disappears._x000D_
8.
If There might be a HW fault in the GPS/GNSS receiver module. Check the operation and change the GPS/GNSS IPreceiver
addressmo
If this
_x000D_
FlexithisBTS fault
fault FDD, happens
happens Flexiright BTSafter
right after a
a commissioning
TDD:_x000D_ commissioning or or a a configuration
configuration change, change, verify verify thethe following
IP address configuration
of the adjacent data: BTS. of
1. Check
Block/unblock the commissioning parameters with the BTS Site Manager Commissioning_x000D_
Flexi BTS FDD,the
Wizard._x000D_
BTS._x000D_
Flexi BTS TDD:_x000D_
_x000D_
Block/unblock the BTS._x000D_
_x000D_
Check
Flexi the connection
Zone Micro FDD,with Flexithe ZoneiOMS Microor the third party tool.
TDD:_x000D_
_x000D_
2. Load the correct commissioning file to the BTS.
1.
Note:
Flexi Check Perform
Zone and Micro update
theFDD, stepsconfiguration
below
Flexi Zone in the parameters
Microlisted order
TDD:_x000D_ related
until the to cell
BTSbandwidth and channels._x000D_
fault disappears._x000D_
2.
For Reset
_x000D_
1. Check failureandthe BTS._x000D_
update configuration
in subscriber trace session parameters related to cell bandwidth
activation/deactivation, based on the anderror
channels._x000D_
cause provided as part of the additional info fo
3.
Flexi
2. Retry
Reset BTS
- "Subscriber configuration
the FDD, Flexi BTS
BTS._x000D_
& Equipment push._x000D_
TDD:_x000D_
Trace feature not enabled": Enable theBTSsubscriber trace feature at theconfigured
BTS. Any at events correspondin
Check
1. Check and ensure
the otherinactive that the PLMNs
BTS faults. that have been listed with this fault and that have been BTS for one or mo
-3."trace
Retryreference
configuration use,push. trace cannot_x000D_ be started": This problem is out of the scope of what can be fixed at the BTS, and is with
2.
same Reset
1.Check Traceifthe the System
maximum
Reference Module number
Number. by blocking/unblocking
Aofpossible
LNADJ solution objects has isit._x000D_
tobeen reached. If all
try deactivating yes, check if there
subscriber tracesareandLNADJ objects
activating them that can be man
again._x000D
3. Update
_x000D_
-Check
"max ifnumber maximum and activate
of UE number the SW
trace session to
of LNADJW the BTS._x000D_
reached, trace cannot
was reached. If yes, becheck
started": This are
if there problemLNADJW is outobjects
of the scope
that can of be
what can be deleted.
manually fixed at tT
4. Checkif(which
2.Check
sessions the theSW is files._x000D_
maximum the number number
maximum of LNADJL of objects
active has beentraces
subscriber reached. If yes, check
supported at the ifBTS
there
at are
any LNADJL
point in objects
time) at related
the BTS.with Lt
Tryca
Check
5. Replace if theFSM._x000D_maximum number of LNRELW objects has been reached. If it has been, check if there are LNRELW objects that
- "Trace session cannot be started due to ongoing handover for the UE" OR "Trace session cannot be stopped due to ongoing
_x000D_
Check
NMS._x000D_ if:_x000D_
Flexi
1) the
_x000D_ Zone
maximum
Add the LNREL Microobject FDD, pointing
number Flexi Zone
of LNRELW to the Micro per TDD:_x000D_
cell neighbor
correct and WCDMA to allowcarrier
thefrequency
handover has already
or enable thebeen reached
UE-based ANR.(is greater than or equa
1.
For Check
makes failurespacethe other
for new
in cell/interface activeLNRELW BTS faults.
object
tracetosession _x000D_
per cell and WCDMA
activation/deactivation, carrier frequency._x000D_
based on the error cause provided as part of the additional info
Reset
2.
2) Reset (block/unblock)
the maximum the feature BTSnumber the BTS
byisBlocking/Unblocking recover the faulty
it._x000D_ cell.of: psHoAllowed,
- "Cell trace notofenabled":
mobility parameters
Enable (either
the cell trace feature at the BTS. srvccAllowed)
Afterwards,oftry LNRELW
again toper cell and
activate theWCDMA
requiredcarrie
cell/in
3. Update
Block/unblock and activate
the BTS. the SW to the BTS._x000D_
- "trace reference in use, trace cannot be started": This problem is out of the scope of what can be fixed at the BTS and is within
4.
theCheck
1. same the
Check for Trace SWReference
E-UTRAN files._x000D_cellsNumber.
that operate A possibleon thesolution
same frequency is to try deactivating
layer and use all cell and interfaces
the same PCI and that traces.areAfterwards, try activat
in close vicinity._x00
5.
2. Replace
- "max
Reassign number Flexi
PCIs Zone Micro
of cell/interface
for the BTS.
discovered trace cells. sessions reached, trace cannot be started": This problem is out of the scope of what can b
cell/interface trace sessions (which is the maximum number of active cell and interface trace sessions put together supported a
If the GPS is configured as reference clock, perform the following:_x000D_
1.
Note: Check the GPS
Perform receiver
the steps below installation._x000D_
in the listed order until the alarm disappears._x000D_
2.
1. Check
Check the
the GPS receiver
availability of status._x000D_
the adjacent BTS._x000D_
Note:
3. Check Perform
the the steps below
connection between in thethelisted order
GPSBTS._x000D_
receiver until and theFSM._x000D_
alarm disappears._x000D_
2.
1. Check
Check the connection
connectivity to with
the the
related adjacent
adjacent BTS._x000D_
_x000D_
Note:
3. Perform and
Disconnect the steps
reconnect belowthe in adjacent
the listedBTS. order until the alarm disappears:_x000D_
2.
If
1. Check
the
CheckTOP other
signal
availabilityfaults._x000D_
is configured
of MME._x000D_ as reference clock,until
perform the following:_x000D_
Note:
3. Check Perform the steps below in tothethe listed order tothethealarm disappears._x000D_
Check
2.
1. Check
Check thethe
other
the
parameters
connection
faults on
availability to of related
the
MME TOP and
MME._x000D_ server. X2 interface
BTS._x000D_ adjacent BTS._x000D_
4.
Check
3. Reset
Check thethe rootBTS.cause reported in the fault. Based on the root cause, these necessary actions must be taken:_x000D_
2.
_x000D_ Check the the parameters
connection with related to S1 interface in the BTS and MME._x000D_
MME._x000D_
4.
Note:
3. Reset
Disconnect the BTS.
Perform the steps
and belowMME. in the listed order until the alarm disappears._x000D_
1.
1. "S1
Check linkthe failure" -reconnect
Check
availability of for any active 6202 "Transport layer connection failure in S1 interface" faults. Take necessary action
MME._x000D_
Check
2. "Networkthe value of the "rimStatus" parameter
- Checkinthe LNADJG objects to findreconfiguration
all impacted RIM associations._x000D_
2.
_x000D_ Check theReconfiguration
connection withInduced" MME._x000D_ most recent network made w.r.t changes in the list of PLMNs
3.
Check
3. "MME Configuration
the value
Disconnect and ofreconnectChanges"
the "rimStatus" MME. - Check the most recent configuration changes made
parameter in LNADJG objects to find all impacted RIM associations._x000D_ at MME(s) with which the eNB is conne
If
_x000D_only a few LNADJG objects have "rimStatus" Unavailable, check if LNADJG identifiers (cell global id) of related GERAN cells
This
_x000D_ fault does not require any (special) actions.
If only a few LNADJG objects have "rimStatus" Unavailable, check if LNADJG identifiers (cell global id) of related GERAN cells
If
Collect
_x000D_many Technical
LNADJG Logs objects from have BTS "rimStatus"
to clear anUnavailable,
alarm raisedcheck by this thefault.
connectivity
Until the to GSMisnetwork
alarm (MME<->SGSN<->BSC)._x000
active collecting of next memory dumps
If many
Flexi BTS LNADJGFDD, Flexi objectsBTShave "rimStatus" Unavailable, check the connectivity to GSM network (MME<->SGSN<->BSC)._x000
TDD:_x000D_
Source: _x000D_
Note! Perform the steps below in the listed order until the fault disappears._x000D_
-_x000D_
FCM/FCT: Perform eNB reset._x000D_
Flexi
-Flexi BTS FDD,
FSP/FBB: Change Flexithe BTS cellTDD:_x000D_
configuration to decrease call processing load._x000D_
Note: BTS
Perform FDD, theFlexi
steps BTS TDD:_x000D_
below in the listed order until the fault disappears._x000D_
_x000D_
Flexi
Note! BTS
Perform FDD, Flexi
the steps BTS TDD:_x000D_
below in the listed order until the fault disappears._x000D_
1.
Flexi
Note: ResetZone the
Perform System
Micro the FDD,
stepsModule._x000D_
Flexi
below Zone Micro
inModule._x000D_
the listedTDD:_x000D_
order until the fault disappears._x000D_
1.
Flexi
2. ResetBTS
Replace the FDD,
theSystem/Baseband
Flexi
System BTS Module TDD:_x000D_or FBBx module (according to the fault source)_x000D_
None
1.
2. Reset the System Module._x000D_
NoReplace
Note:
_x000D_
2.
Perform
actions
Replace
the the
are
the
System/Baseband
steps below in the
required
System
Module._x000D_
listed order until the fault disappears._x000D_
Module or FBBx module (according to the fault source)_x000D_
_x000D_
1.
Flexi ResetZone theMicro System FDD, Module._x000D_
Flexi Zone Micro TDD:_x000D_
_x000D_
Reset
Flexi
2. the BTS
Zone
Replace Micro
the thewhen
FDD,
System allFlexi
required
Module Zone orBTSMicro
FBBx IPmodule
settings(according
TDD:_x000D_ have beentoset. the fault source)_x000D_
Note:
Flexi Perform
Zone Micro steps
FDD, below
Flexi Zone in the
Microlisted order until the fault
TDD:_x000D_ disappears._x000D_
1.
1. Reset
_x000D_
1) Check
Reset the the
if the
the stepsBTS._x000D_
far end
BTS._x000D_ has BFD switched on._x000D_
Perform
2.
Flexi
2) If the
CheckZonefault Micro
cabling below
persists,
FDD,
and replace
Flexi
networkin the the
Zone listed
BTS.
Micro
connections order until
TDD:_x000D_
toofthethe faultend.disappears._x000D_
2.
E1
1. Replace
interfaces:
Reset the the Flexi
Check
BTS._x000D_ Zone
that Micro
the BTS.
interface type thefar far-end interface is also configured to be a framed E1 interface. If this is not t
Perform the steps below in the listed order until the fault disappears._x000D_
2.
1.
1. Replace
Check
Reset the Flexi
thatBTS._x000D_
the Zone Micro BTS.
the cables are connected to the correct connectors._x000D_
JT1
_x000D_ interfaces: Check that the interface type of the far-end interface is also configured to be a JT1 interface. If this is not the ca
2. Check
1. Replace that thethe Flexi Zoneare
cables Micro BTS._x000D_
connected to the correct connectors._x000D_
2.
2. Check
Check that
that the
the interface
interface at
at the
the far-end
far-end interface
interface is is switched
switched on._x000D_
on._x000D_
Flexi
_x000D_ BTS FDD, Flexi BTS TDD:
3.
1. Check whether there are active alarms at the far end. If there are, follow Ethernet
the instructions forofhandling
the unit.those alarms._x000D_
3. Insert
Use Check
the BTSan
whetherSFP
Sitemodule
there are
Manager with to the
active
check correct
alarms
which laser thetype
far (class
atinterfaces end. have If 1) to the
there
been are, Gigabit
follow the
configured interface
as instructions for handling
synchronization sources. those alarms._x000D_
_x000D_
Use BTS Site Manager to check which interfaces have been configured as
Flexi
4.
1. To
CheckZone
verify thatMicro
that the FDD,
the Flexi
hardware
cables are Zone of theMicro
connected TDD:
interface
to theunit works
correct correctly, connect a loop cable and check whether the alarm disappear
connectors.
synchronization
1.
ExecutePlug-out/plug-in
general sources.
SFP
configuration module. checks:_x000D_
2. Check whether the interface at the far end is switched on.
-2.
3.
None. Checkwhether
Configuration
Check for SFP validity
of CMP
there server
are (could IP be
active wrongat
address
alarms type).
and theport
farand
end.DNS server
If there are,IPfollow
address._x000D_
the instructions on handling those alarms.
For
-3. all interfaces,
Insert
Configuration a compliant
of do as
routingSFP follows:
module.
entries towards remote peers._x000D_
4. To
1)Check verify that
cablingofand the hardware
network of the
connections interface unit
to the far worksend. correctly, connect a loop cable and check whether the alarm disappear
- Configuration IPSec policies towards remote peers._x000D_
1. Check
2)Check
Check
1)Inspect that
Link
remotedetails the
OAM
peerscables
of event-
theand typeareand connected
Linkcritical
intermediate
of the OAM tostate
networkthe correct
event information.
elements
through connectors.
interconnections._x000D_
online configuration management.
2. Check
3)Check
Check
2)Check the whether
Ethernet
Link LDAP OAM the interface
interface
connection
state at theof
configuration
towards
information farthe
the end
at is switched
local
Certificate andRevocation
interface. remoteon. side. Listnecessarily
server._x000D_
Replace
3. Check the
whether faulty SFP.
there Note
are active that only the
alarms at SFP might be faulty, not the entire hardware unit.
4)Insert
Check
3)Check acabling
DNS Link OAM
names._x000D_
and loopback.
network connections tothethefarfarend.
end.If there are,
follow
1. Clean
Check
4)Check the
thetheinstructions
size
Ethernet cables
of the and onconnectors.
file
interface handling
at those alarms.
the Certificate
configuration atRevocation
local and remote List server.
side.
4. To
5)Insert verify
Check that a Link that
the OAM the hardware
loopback.
configured of the
interface type interface
matches unit works correctly,interface
the configured connect type of the far end. If this is the case, the problem is
a
2.loop
Check cablethatand the check
connectors whether arethe alarm connected
properly disappears.to the unit.
Check the intermediate transmission network for alarms indicating the root cause and follow the instructions for handling these
Monitor
3.
1. Checkthe that
the received
the cable
intermediate clock quality. to thenetwork
connected
transmission interface forinalarms
question is not damaged
indicating and isand
the root cause within the the
follow specifications.
instructions for handling thes
Replacing faulty hardware:_x000D_
4.
2.
1. Follow
To check the signal
inthe in thehardware,
thetransmit network and
connectcheck whether
a loop inany
cable and other alarms
check that concerning the fault
no alarms appear forare
thisoninterface.
(such as Laser End of Life).
1) Re-Plug
Check cabling. expected transport unit referenced the alarm text._x000D_
_x000D_
2) Check
Check CCM configuration at remote peer.
1)
2. In casecabling. there is a unit present in the slot, remove it from the slot_x000D_
2)
and Check
Check plug youritconfiguration
back in. If the
username atunit
and remote is still
password. peer.not recognised and the alarm_x000D_
remains, replace
Provide the certificate. the faulty unit with a new one. _x000D_
_x000D_
1. Check the network
De-commissioning betweencommissioned
previously both BFD peers for physical link failures or misconfigurations.
hardware:_x000D_
1. Re-commission
Check the BFD configuration to remove the at localhardware
end. unit referenced in the alarm text._x000D_
2. Check if the BFD functionality in the peer is switched on and that the configurations of the BFD peers match.
_x000D_
Flexi BTS FDD, Flexi BTS TDD:
Note
Try with 1: Before re-commissioning,
local management or site the supporthardware
equipment.unit must not be present in the slot._x000D_
Note 2: "Send all parameters" is required for re-commissioning.
Flexi Zone Micro FDD, Flexi Zone Micro TDD:
Confirm
check that
the Ethernet Synchronization
connectivity master/slave setting are correct on the BTS and backhaul equipment.
to NTP server_x000D_
Note: Flexi
check Zone
the NTP Microconfiguration
server BTS only supports
at BTS.slave mode.
check that the vendor BTS certificate expiry date and renew it.
Update trust anchors.
1. Check the fault name of the toggling FTM fault from the Fault name of_x000D_
this fault._x000D_
_x000D_
Flexi Zonethe
2. Follow Micro FDD, Flexi
instructions Zone
of the Micro FTM
toggling TDD:fault to clear the problem._x000D_
1. Confirm
_x000D_
Check that SyncE
the cable is desired as a synchronization source.
connectivity.
2. Confirm
Note!
Check that information
Detailed
the TOP eNB configuration settings
about the
configuration. for frequency
toggling ssmEnabled
canisbe
correct.
found in_x000D_
3. Troubleshoot with Backhaul provider on the reason SSM errors.
alarm history file, which can be downloaded using BTS Site Manager. The log file is available with Snapshot._x000D_
SW upgrading:_x000D_
- Upgrade the FSM SW release to the latest version that includes the support for the new external tranport device variant._x000
_x000D_
An
UnitIPvariant
Trafficreplacement:_x000D_
Capturing session is ongoing and base station traffic is captured to a local Ethernet interface or into a file on the ba
-Operator
Replacecan the check
unsupported device
the current variant
remote to another
tunnel oneparameter
endpoint that the currently running SW release supports. on NetAct or BTS SM
(ipSecBkupTunCurrRemoteEndpoint)
Instructions in release RL60
Check the active fan alarms and the airflow of the BTS.
1. Download the BTS SW again.
2.
There Reset are(block/unblock)
several possibilities the BTS.
for the alarm activation, therefore a BTS Clock Frequency History feature has been developed. Y
3. If
history Step 2
feature,does not
see help,
the replace
online help the alarming
of BTS module. Depending on the possible reason, follow the instructions below:_x00
Site Manager).
1. Make sure that the module is properly connected. If the module LED does not light up, the module is faulty. Check the alarmi
_x000D_
2. Check the fault history._x000D_
FlexiBTS:_x000D_
1. In case of a fault in the transmission network synchronization, you must correct the network synchronization. The long-term a
_x000D_
1. Block/unblock
Block/unblock the
_x000D_
1.
Note:_x000D_ the alarming
alarming module._x000D_
module._x000D_
_x000D_
If the basic accuracy of the Iub signal isreset
in order, but thereto is too much
2.
If
Update
2.
Replace
Fault
If FSP 10 the
isfor
theFR
compatible alarming
is SW
fault activemodule._x000D_
after
to the
source, LTE
BTS
perform FSM
(check
the FSPthe andversions
SW
reset LTE-2G
recovery. RF Sharing
Ifsee the
FCM/FCT isinstability,
isinthe
active use,
SW that is,
check
version,
fault source,
theupdate
if and
alarm jitter/wander
7602the
perform BCF
the is outside
NOTIFICATION
active
system SW the accep
version),
module (Sh
reset un
r
needed._x000D_
_x000D_
_x000D_
Update compatible SW to the BTS (check the SW versions to see the active SW version, and update the active SW version), un
_x000D_
3.
3. If
1. InStep
casethe
Check 1ofandaNTP2 does
BTS not help,fault,
equipment
setting._x000D_ replace the alarming
the location mightmodule._x000D_
be:_x000D_
_x000D_
Transport
2. Check the part:_x000D_
stratum parameter on the NTP server._x000D_
1. Retry the SW update.
_x000D_
2. Savecheck
- First, the snapshot
the alarms andofcheck
the TRSthe with
download
BTS Sitestatus from the
Manager andBTS
act SWDLreport in the snapshot file.
accordingly._x000D_
-Unblock
If there theare module
no alarms, check the TRS
with BTS Site Manager. synchronization settings._x000D_
_x000D_
To
FCM cancel the fault, unblock the cell.
unit:_x000D_
_x000D_
To cancel the fault, unblock the BTS. Unblocking the BTS causes a Site Reset (FSMr3) or BTS Reset (FSMr2).
- If the TDM reference signal accuracy and the TRS are in order but the FCM unit is still alarming, run the fast tuning with BTS S
- If the alarm is still active after the fast tuning is finished, reset the site. If the problem does not disappear in a few minutes, res
FlexiBTS:
- If that does not help, replace the FCM unit._x000D_
_x000D_the alarming unit/module.
Replace
1.
Note Block/unblock
that if the the alarming
in theunit/module.
1. Upgrade the reason
system is module transmission
SW. network synchronization, replacing the faulty unit does not solve the problem. Furth
_x000D_
2. Replace the unit.active
2.
4. Remove/reinsert
1. After
Check thethe other
fault the alarming
situation alarms.
has beenunit/module.
If cleared,
the ROMyou diskmight
is corrupted,
need to tunechangethethe
BTS alarming
master module.
clock because the BTS master clock adjus
_x000D_
1. Check the other active alarms. If the ROM disk is corrupted, change the alarming module.
3.
2. Replace by
Block/unblock
-1.manually thechanging
alarming unit/module.
the alarming
the module.
DAC word There are no visit)_x000D_
recovery actions and because of that the block/unblock can be tried once.
If the(during a site
Check the other active alarms. ROM disk is corrupted, change the alarming module.
- orBlock/unblock
2. with fast tuning, the in which the
alarming BTS master
module. There areclocknoisrecovery
tuned in actions
a few minutes automatically
and because of that the near the Iub reference
block/unblock (normal
can be tunin
tried once.
1. Check
Note, the other active alarms. If the ROM disktuning
is corrupted, change the alarming module.
2. Block/unblock the alarming module. There are no recovery actions and because of that the block/unblock can be tried once. t
however, that you should only use the fast in case the Iub reference signal is known to be a good one. Otherwise
_x000D_
1. Check the other active alarms. If the ROM disk is corrupted, change the alarming module.
2. Block/unblock
Background the alarming
information: module. is
The principle There arethe
that in nomobile
recovery actionsthe
network, and because of that
synchronization goesthe from
block/unblock can be tried
the S1 interface. once.in
However,
1. If only one FSP in the BTS generates this alarm, the FSP is faulty.
operator.
2. This does
Block/unblock thenot harm the
alarming system
module. if theare
There synchronization
no recovery actions of the leased line service
and because of thatprovider is also accurate
the block/unblock can beortried
stable eno
once.
Note! Perform the steps below in the listed order until the fault disappears._x000D_
2. If all FSPs generate this alarm, the FSM is faulty.
_x000D_
1. If the alarming module is the System Module (FSM1), restart BTS.
1.
2. Reset
If that the System
does notthe Module._x000D_
help, replace the alarming FSM.
3. Block/unblock
[User
_x000D_ defined] FSM.
2. Replace
[User defined] the System Module._x000D_
4. If that does not help, replace the faulty module.
_x000D_
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
[User defined]
Note: Perform the following steps in the listed order until the fault disappears:
1. Make sure that the unit/module is properly connected. If the unit/module LED does not light up, the unit/module is faulty. Che
1. Use BTS Site Manager to perform a full commissioning to the BTS using the NetAct backup upload SCF file as template.
_x000D_
Check the frequencies' parameters against the BTS HW configuration. The frequency is out of the min/max limit of the HW, or t
2. Check the
frequency fault history._x000D_
range
2. Download
Replace
_x000D_ the two and
alarming bandwidth.
different software packages so that the faulty file is removed from the BTS.
module.
Change the faulty module.
3. Download the software again.
4. Replace
Replace thethe SystemSystem
alarming Module. Module._x000D_
_x000D_
Note! Perform the steps below in the listed order until the fault disappears._x000D_
_x000D_
1. Block/unblock the System Module._x000D_
1. Check the other alarms of the BTS and FTM and act accordingly._x000D_
_x000D_
Commission
_x000D_ the BTS site with correct IP addresses.
2. Replace the System Module.
2. Wait
1. If there arethe
until nothe
other synchronization-related
module alarms
is automatically heated active,
to the start the
required fast tuning
start-up with BTS Site Manager._x000D_
temperature.
_x000D_
1. Check the antenna cables and connectors towards the MHA. Fix or replace the broken parts.
3. If
2. Reset the site.
the fault Run fast
has been tuning
active again._x000D_
for more than two hours, check the environmental conditions of the site.
1. Check the antenna cables and connectors towards the MHA. Fix or replace the broken parts.
_x000D_
2. Restart the MHA by blocking and unblocking the Flexi Radio (FR) Module.
4.
1. Check
NOTE! This referenceline
theoperation
antenna signal
andall
affects accuracy
antenna
antennabylines
linemeasuring
devices.
and it with
Fix
cells a frequency
or replace
related theFR
to the counter
faulty (note: requires
parts/devices._x000D_
Module, not just a good
the faulty one.timebase for the
If the alarm counte
reappears
2. Restart the
tuning._x000D_
2. Alarm is MHA byonly
cancelled blocking
at RF and unblocking
Module reset orthe
BTSFlexi Radio (FR)
reset. Module.
1. Check
NOTE! theoperation
This antenna cables, connectors,
affects all antenna,
antenna lines and possible
and cells related toantenna line devices._x000D_
the FR Module, not just the faulty one. If the alarm reappears
_x000D_
_x000D_
1.
5. Check
If that the antenna
does not cables,
help, replace connectors,
the system antenna,
module. and possible antenna line devices.
2. Check the antenna line (TX-cable-antenna) impedance matching.
Replace the alarming Radio module.
2. Check the antenna line (TX-cable-antenna) impedance matching.
2. Follow the instructions of the toggling FTM fault to clear the problem.
Check the cable connectivity.
Note! Detailed
Check the TOPinformation about the toggling frequency can be found in
configuration.
alarm history file, which can be downloaded using BTS Site Manager. The
SW upgrading:
log file is available with Snapshot."
- Upgrade the FSM SW release to the latest version that includes the support for the new external tranport device variant.
An
UnitIPvariant
Trafficreplacement:
Capturing session is ongoing and base station traffic is captured to a local Ethernet interface or into a file on the ba
-#N/A
Replace the unsupported device variant to another one that the currently running SW release supports.
Related Faults
3000:EFaultId_SystemModuleFailure, 3003:EFaultId_FbiaFailureAl
3070:EFaultId_ConfigurationError
3000:EFaultId_SystemModuleFailure, 3003:EFaultId_FbiaFailureAl
3000:EFaultId_SystemModuleFailure, 3003:EFaultId_FbiaFailureAl
3070:EFaultId_ConfigurationError , 3003:EFaultId_FbiaFailureAl
3070:EFaultId_ConfigurationError , 3003:EFaultId_FbiaFailureAl
3000:EFaultId_SystemModuleFailure, 3003:EFaultId_FbiaFailureAl
3000:EFaultId_SystemModuleFailure, 3003:EFaultId_FbiaFailureAl
19248, 3003:EFaultId_FbiaFailureAl
3003:EFaultId_FbiaFailureAl
3000:EFaultId_SystemModuleFailure, 19268, 21234, 29615, 3003:EFaultId_FbiaFailureAl
3070:EFaultId_ConfigurationError
3003:EFaultId_FbiaFailureAl
3003:EFaultId_FbiaFailureAl
3080:EFaultId_BtsReferenceClockMissing
3000:EFaultId_SystemModuleFailure
3000:EFaultId_SystemModuleFailure
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3070:EFaultId_ConfigurationError
3070:EFaultId_ConfigurationError
3000:EFaultId_SystemModuleFailure
3000:EFaultId_SystemModuleFailure
3080:EFaultId_BtsReferenceClockMissing
3080:EFaultId_BtsReferenceClockMissing
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3050:EFaultId_FanFailure
3050:EFaultId_FanFailure
3050:EFaultId_FanFailure
3050:EFaultId_FanFailure
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3000:EFaultId_SystemModuleFailure, 3003:EFaultId_FbiaFailureAl
3003:EFaultId_FbiaFailureAl
3003:EFaultId_FbiaFailureAl
3003:EFaultId_FbiaFailureAl
3070:EFaultId_ConfigurationError
3080:EFaultId_BtsReferenceClockMissing
3000:EFaultId_SystemModuleFailure, 3003:EFaultId_FbiaFailureAl
3000:EFaultId_SystemModuleFailure, 3003:EFaultId_FbiaFailureAl
3070:EFaultId_ConfigurationError , 3003:EFaultId_FbiaFailureAl
3010:EFaultId_RfModuleFailure
3070:EFaultId_ConfigurationError
3050:EFaultId_FanFailure
21228, 3003:EFaultId_FbiaFailureAl
3050:EFaultId_FanFailure
3050:EFaultId_FanFailure
3050:EFaultId_FanFailure
3000:EFaultId_SystemModuleFailure, 3003:EFaultId_FbiaFailureAl
3080:EFaultId_BtsReferenceClockMissing
3003:EFaultId_FbiaFailureAl
3070:EFaultId_ConfigurationError
3080:EFaultId_BtsReferenceClockMissing
3000:EFaultId_SystemModuleFailure, 3003:EFaultId_FbiaFailureAl
3000:EFaultId_SystemModuleFailure, 3003:EFaultId_FbiaFailureAl
3000:EFaultId_SystemModuleFailure, 3003:EFaultId_FbiaFailureAl
19228
21229
21229
21233
3000:EFaultId_SystemModuleFailure, 3003:EFaultId_FbiaFailureAl
3000:EFaultId_SystemModuleFailure
3070:EFaultId_ConfigurationError
3090:EFaultId_BtsInternalSwManagementProblem
3090:EFaultId_BtsInternalSwManagementProblem
3060: EFaultId_CommissioningError
3030:EFaultId_FailureInOptical_Rp3Interface
3030:EFaultId_FailureInOptical_Rp3Interface
1811:EFaultId_BbBus_ConfFailedAl, 1815:EFaultId_BbBus_SyncFailedAl, 2016:EFaultId_Muksu_SMTimeOffAl, 2017:EFaultId
10:EFaultId_NoConnectionToUnitAl , 1806:EFaultId_CommunicationFailureAl, 2000:EFaultId_OIC_TxAl, 2001:EFaultId_OIC_P
2008:EFaultId_OIC_CBRxFullAl, 2009:EFaultId_OIC_CBTxFullAl, 2010:EFaultId_OIC_EBFullAl,
2:EFaultId_UnitOverheatAl , 1827:EFaultId_StartTempBelowMinAl, 2007:EFaultId_OIC_DBTxFul
4071:EFaultId_SysDangerouslyOverheatAl, 4077:EFaultId_
2009:EFaultId_OIC_CBTxFullAl, 2010:EFaultId_OIC_EBFullAl, 2007:EFaultId_OIC_DBTxFullAl, 2008:EFaultId_OIC_CBRxFul
1825:EFaultId_PublicIPmissingAl, 4036:EFaultId_InvalidConfigurationFileAl, 6252:EFaultId_FailureInNetworkPlanFile
2010:EFaultId_OIC_EBFullAl, 2011:EFaultId_OIC_MCUBFullAl, 2014:EFaultId_Muksu_SFCRCompDevAl, 18648, 4039:EFault , 4038:EF
29:EFaultId_FileCorruptionAl , 30:EFaultId_SwUpdateAl , 29:EFaultId_FileCorruptionAl , 30:EFaultId_SwUpdateAl , 28:EFaultId
215:EFaultId_FlashRdAl, 216:EFaultId_FlashEraseAl,
10:EFaultId_NoConnectionToUnitAl 217:EFaultId_FlashDrvAl,
, 1847:EFaultId_HardwareErrorAl, 218:EFaultId_FlashDbChksumAl,
1806:EFaultId_CommunicationFailureAl, 214:EFaultI
1871:EFaultId_
216:EFaultId_FlashEraseAl, 217:EFaultId_FlashDrvAl,
1873:EFaultId_UnsupportedProcedureAl 218:EFaultId_FlashDbChksumAl, 214:EFaultId_FlashWrAl,
, 1874:EFaultId_OutOfRangeAl , 1871:EFaultId_BusyAl, 215:EFaultI
1872:EFaultId_FormatErrorA
1834:EFaultId_AboveCurrentWindowAl,
4029:EFaultId_SwCorruptedPermanentAl, 1834:EFaultId_AboveCurrentWindowAl, 1869:EFaultId_MinorTMAFaultAl,
1850:EFaultId_SwCorruptedAl, 4029:EFaultId_SwCorruptedPermanentAl, 1870:EFaul
6:EFaultI
1874:EFaultId_OutOfRangeAl
10:EFaultId_NoConnectionToUnitAl , 1806:EFaultId_CommunicationFailureAl
3070:EFaultId_ConfigurationError
3000:EFaultId_SystemModuleFailure
3090:EFaultId_BtsInternalSwManagementProblem
3030:EFaultId_FailureInOptical_Rp3Interface
3030:EFaultId_FailureInOptical_Rp3Interface
3000:EFaultId_SystemModuleFailure
3070:EFaultId_ConfigurationError
3030:EFaultId_FailureInOptical_Rp3Interface
Related Faults in issue 01
3000:EFaultId_SystemModuleFailure, 3003:EFaultId_FbiaFailureAl
3070:EFaultId_ConfigurationError , 3003:EFaultId_FbiaFailureAl
3000:EFaultId_SystemModuleFailure, 3003:EFaultId_FbiaFailureAl
3000:EFaultId_SystemModuleFailure, 3003:EFaultId_FbiaFailureAl
3070:EFaultId_ConfigurationError , 3003:EFaultId_FbiaFailureAl
3070:EFaultId_ConfigurationError , 3003:EFaultId_FbiaFailureAl
3000:EFaultId_SystemModuleFailure, 3003:EFaultId_FbiaFailureAl
3000:EFaultId_SystemModuleFailure, 3003:EFaultId_FbiaFailureAl
19248, 3003:EFaultId_FbiaFailureAl
3003:EFaultId_FbiaFailureAl
3000:EFaultId_SystemModuleFailure, 3003:EFaultId_FbiaFailureAl
3070:EFaultId_ConfigurationError
3003:EFaultId_FbiaFailureAl
3003:EFaultId_FbiaFailureAl
3080:EFaultId_BtsReferenceClockMissing
3000:EFaultId_SystemModuleFailure
3000:EFaultId_SystemModuleFailure
3070:EFaultId_ConfigurationError
3070:EFaultId_ConfigurationError
3000:EFaultId_SystemModuleFailure
3000:EFaultId_SystemModuleFailure
3080:EFaultId_BtsReferenceClockMissing
3080:EFaultId_BtsReferenceClockMissing
1923:EFaultId_FrUnitUnidentified
3000:EFaultId_SystemModuleFailure, 3003:EFaultId_FbiaFailureAl
3003:EFaultId_FbiaFailureAl
3003:EFaultId_FbiaFailureAl
3003:EFaultId_FbiaFailureAl
3070:EFaultId_ConfigurationError
3080:EFaultId_BtsReferenceClockMissing
3000:EFaultId_SystemModuleFailure, 3003:EFaultId_FbiaFailureAl
3000:EFaultId_SystemModuleFailure, 3003:EFaultId_FbiaFailureAl
3070:EFaultId_ConfigurationError , 3003:EFaultId_FbiaFailureAl
3070:EFaultId_ConfigurationError
3000:EFaultId_SystemModuleFailure, 3003:EFaultId_FbiaFailureAl
3080:EFaultId_BtsReferenceClockMissing
3003:EFaultId_FbiaFailureAl
3070:EFaultId_ConfigurationError
3080:EFaultId_BtsReferenceClockMissing
3080:EFaultId_BtsReferenceClockMissing
3000:EFaultId_SystemModuleFailure, 3003:EFaultId_FbiaFailureAl
3000:EFaultId_SystemModuleFailure, 3003:EFaultId_FbiaFailureAl
3000:EFaultId_SystemModuleFailure, 3003:EFaultId_FbiaFailureAl
3090:EFaultId_BtsInternalSwManagementProblem
3000:EFaultId_SystemModuleFailure
3070:EFaultId_ConfigurationError , 3003:EFaultId_FbiaFailureAl
3070:EFaultId_ConfigurationError
3090:EFaultId_BtsInternalSwManagementProblem
3090:EFaultId_BtsInternalSwManagementProblem
3090:EFaultId_BtsInternalSwManagementProblem
3090:EFaultId_BtsInternalSwManagementProblem
3090:EFaultId_BtsInternalSwManagementProblem
3000:EFaultId_SystemModuleFailure
3000:EFaultId_SystemModuleFailure
3030:EFaultId_FailureInOptical_Rp3Interface, 3003:EFaultId_FbiaFailureAl
3090:EFaultId_BtsInternalSwManagementProblem, 3003:EFaultId_FbiaFailureAl
3000:EFaultId_SystemModuleFailure, 3030:EFaultId_FailureInOptical_Rp3Interface, 3100:EFaultId_AntennaLineFailure, 3511:
3070:EFaultId_ConfigurationError
3020:EFaultId_BaseBandBusFailure
3020:EFaultId_BaseBandBusFailure, 3003:EFaultId_FbiaFailureAl
3000:EFaultId_SystemModuleFailure
3000:EFaultId_SystemModuleFailure
3060: EFaultId_CommissioningError
3040:EFaultId_TemperatureAlarm
3120: EFaultId_MastHeadAmplifierFault
3120: EFaultId_MastHeadAmplifierFault
3010:EFaultId_RfModuleFailure
3100:EFaultId_AntennaLineFailure
3090:EFaultId_BtsInternalSwManagementProblem
3070:EFaultId_ConfigurationError
3070:EFaultId_ConfigurationError
3120: EFaultId_MastHeadAmplifierFault
3100:EFaultId_AntennaLineFailure
3100:EFaultId_AntennaLineFailure
3100:EFaultId_AntennaLineFailure
3100:EFaultId_AntennaLineFailure
3000:EFaultId_SystemModuleFailure
3000:EFaultId_SystemModuleFailure
3080:EFaultId_BtsReferenceClockMissing
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3010:EFaultId_RfModuleFailure
3050:EFaultId_FanFailure
3050:EFaultId_FanFailure
3050:EFaultId_FanFailure
3050:EFaultId_FanFailure
3030:EFaultId_FailureInOptical_Rp3Interface
3030:EFaultId_FailureInOptical_Rp3Interface
3030:EFaultId_FailureInOptical_Rp3Interface
3030:EFaultId_FailureInOptical_Rp3Interface
3030:EFaultId_FailureInOptical_Rp3Interface
#N/A
3030:EFaultId_FailureInOptical_Rp3Interface
3030:EFaultId_FailureInOptical_Rp3Interface
3030:EFaultId_FailureInOptical_Rp3Interface
3030:EFaultId_FailureInOptical_Rp3Interface
3020:EFaultId_BaseBandBusFailure, 3003:EFaultId_FbiaFailureAl
3020:EFaultId_BaseBandBusFailure, 3003:EFaultId_FbiaFailureAl
3020:EFaultId_BaseBandBusFailure
3030:EFaultId_FailureInOptical_Rp3Interface
3030:EFaultId_FailureInOptical_Rp3Interface
3020:EFaultId_BaseBandBusFailure
3020:EFaultId_BaseBandBusFailure, 3003:EFaultId_FbiaFailureAl
3020:EFaultId_BaseBandBusFailure
3020:EFaultId_BaseBandBusFailure
3020:EFaultId_BaseBandBusFailure
10:EFaultId_NoConnectionToUnitAl , 16:EFaultId_SynchronizationAl, 69:EFaultId_Post_test_failedAl, 418:EFaultId_OseFatalE
1876:EFaultId_SRAMWrAl, 1875:EFaultId_SRAMRdAl,
10:EFaultId_NoConnectionToUnitAl 1876:EFaultId_SRAMWrAl,
, 69:EFaultId_Post_test_failedAl, 4010:EFaultId_PLLStatusNotLockedAl
94:EFaultId_UnknownUnitType, , 40
214:EFaultId_FlashWrAl
216:EFaultId_FlashEraseAl, 217:EFaultId_FlashDrvAl, 218:EFaultId_FlashDbChksumAl, 214:EFaultId_FlashWrAl, 215:EFaultI
217:EFaultId_FlashDrvAl, 218:EFaultId_FlashDbChksumAl, 214:EFaultId_FlashWrAl, 215:EFaultId_FlashRdAl, 216:EFaultId_F
1815:EFaultId_BbBus_SyncFailedAl, 2016:EFaultId_Muksu_SMTimeOffAl, 2017:EFaultId_Muksu_SRx10b8bAl, 2019:EFaultId
2058:EFaultId_MuksuMsgRoutingFailedAl
1816:EFaultId_Trans_Clk_MsgAl, 1898:EFaultId_PpsRefMissAl, 1899:EFaultId_2MExtRefMissAl
3070:EFaultId_ConfigurationError
3070:EFaultId_ConfigurationError
3020:EFaultId_BaseBandBusFailure
3000:EFaultId_SystemModuleFailure, 3003:EFaultId_FbiaFailureAl
3000:EFaultId_SystemModuleFailure
3060: EFaultId_CommissioningError
3060: EFaultId_CommissioningError
3010:EFaultId_RfModuleFailure
3040:EFaultId_TemperatureAlarm
3050:EFaultId_FanFailure
3040:EFaultId_TemperatureAlarm
3050:EFaultId_FanFailure
3050:EFaultId_FanFailure
3050:EFaultId_FanFailure
3000:EFaultId_SystemModuleFailure
3030:EFaultId_FailureInOptical_Rp3Interface
#N/A
#N/A
3070:EFaultId_ConfigurationError
#N/A
#N/A
3060: EFaultId_CommissioningError
3090:EFaultId_BtsInternalSwManagementProblem
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A
#N/A