You are on page 1of 9

TRACK AND FIELD EQUIPMENT

NU FOTO SPECS / DETAIL QUANTYTY


MB
1. TRIANGULAR LANE MARKERS FOR ATHLETIC - Made of white fibreglass with diffrent colour digits 2 set
TRACK ( STARTING BOX ) on all side. BLACK, YELLOW , RED
- Hight : 63 cm
-1 set ( 1-8 )

2. STARTING BLOCK COMPETITION - Heavy slotted aluminium channel with trick ribs to 16 pcs
slip anchor plates for increased groud stability.
-Extra large foot pads allow for easy foot placement
ang efficent push off
-centre rail: 86cm long x 102 mm wide with 18 slots
-Pad: 24.5 cm(L) x 13.5 cm (W)
- Five angle adjustments, 45 degrees, 60 degress, 70
degrees, 80 degrees, 90 degrees.
3. STARTERS STAND - Made of top quality aluminium. 2 pcs
- The Stand includes 2 whell for convenient
transport on and off on the field.
Size: 28”L x 55”H x 24”W.

4. TRACK JUDGES STAND - Track judges stand for 8 people with plastic seat. 2 pcs
- Platform for judges, to seat 8 people.
- Made from aluminum.
- The basic framework is contructed from aluminum
profile ( 80 x 60 x 3 mm) with highly rounded edges.
- The steps consist of aluminum side profile which
are inserted all arround into end section profile.
- The guard rails can be screwed and so that
platform takes up less space when stored.
- The wheels, with a diameter of 200mm . allow the
whole platform to moved easily by one person.
- The axes for the wheels are inserted in the basic
frame and welded all around.
5. OFFICIAL FINISH POST -Fabricated with 2” x 5” x 1/8” wall aliminium 1 set
extrusion.
- 55’ High upright with rounded safety conner.
- Powder- croatedwhite for high visibility.
- Rollaway base.
6. LAP COUNTER WITH BELL - The aluminium frame and plated-stell base remain 1 pc
solid in any weather
- The swivel top allows the number indicator to be
turned 360 degrees on the 63”H pole for full viewing
from anywhere.
- The weels provide transportion on and off field.
- The unit have two 10”L flip indicator with numbers
0-9.
- The indicator have side flip levers attached for
quick and easy number changes.
-A large brass bell is fastened to the number
indicator.
7 HIGH JUMP LANDING MAT - Vinyl-coated mesh top have welded & quad- 1 pc
stitched seam for maximum strenght.
- Vinyl side safety skirt keeps unit tighter than
competitors’ with top buckle only tipe units.
-box-tacked bottom buckling system include military-
spec velcro.
- tri-folded vinyl-coated heavy duty handles
- Military-spec hardware component.
- Heavy 22-ounce double knife-coated vinyl
encasement bottoms.
- 2 center units ( each 6’ x 12’ )
- 2 side units ( each 6’x 11’)
- 1 skirt top pad ( 2” x 12’ x 24’)
- Overrall sizes: 12’ x 24’ x 28”( top pad )

8. HIGH JUMP PAD WEATHER COVER - HeavY 18-ounce doble knife-coatedgray vinyl cover 1 pc
protects high jump pad from the elements when not
use.
- Provides superior moisture and UV protection.
- Available to fit high jump pad ( 12’x24’x28”)

9. HIGH JUMP BAR FRAME MOBILE - Prevent landing pads from moving from proper 1 pc
position, even after many landings, with a aluminum
lip at the sides and back.
- Structural aluminum planks welded to an elevated
aluminum frame.
- Four (4) easily movable sections make set up and
breakdown a simple task.
- SizesAvailable to fit high jum pad ( 12’ x 24’)

10 HIGH JUMP STANDS - Custom built aluminum outer tube permits inner 2 set
tube assembly to trvel freely.
- All heights marked English and metric scale.
- Crossbar pad easily adjust 3’ to 9’
- Sturdy, low-profile base.
- Rollaway wheels simplify moving and storage.
11. HIGH JUMP CROSSBAR - Fiberglass shaft is 1-1/4” diameter and an overall 4 pcs
leght 13’1-1/2”.
- Built-in roving
- Synthetic shack-absorbing protective plugs on ends
for longer life.
- Exclusive vinyl end cover provide anchor points to
hold bar secure even stiff winds.

12. HIGH JUMP MEASURING DEVICE - Fabricated of durable square aluminum extrusions, 2 pcs
which provide steady measurements.
- Provides Metric scales from 4’6” to 8’
13 COMPETITION HURDLE - Aluminium frame enginereed for durability and -
low maintenance.
- Flat base, stabilizer bar and reinforced pos welded
into world strongest 3-way hurdle frame.
- Moveable wieghts, galvanized steel ( rust-free) ,
match hurdle height for consistent pull-over
resistance.
- Push-button height adjusment to 0.762m, 0.840m,
0.914m, 0.990m, 1.067m.
- Upper cross can be insert into protective top and
screwed onto it.
- Upper crossbar made from fibreglass.

- Dimension :

Base Profile : 50 x 50 x 3mm


Joining rod : 42mm D x 3.5 mm
Vertical profile: 42 x 42 x 3mm
Adjustable vertical profile : 35 x35 x 2.5 cm
Crossbar : Fibreglass, 70 x 15mm, Insert to vertical
profile.

- FULL COLOR DIGITAL PRITING ON ALL HURDLE TOP


CROSSBAR.

- Printed initial “SENADI”ON BOTH SIDE TOP


CROSSBAR.
14 COMPETITION WATER DITCH HURDLE - bar frame made from aluminum. 1pc
- Crossbar is a synthetic material one with an
intergrated aluminium core.
- Can be adjustable in hight 76.2 m and 91.4 cm
- The crossbar measure a total lenght of 3.66m,
- The crossbar is a square 12.7cm
- Printed initial “SENADI”ON BOTH SIDE TOP
CROSSBAR.
15 COMPETITION STEEPLECCHASE HURDLE - Made from an aluminium support structure. 4 pcs
- With crossbar support
- Top Crossbar is a synthetic material one with an
intergrated aluminium core.
- Can be adjustable in hight 76.2 m and 91.4 cm
- The crossbar measure a total lenght of 5m,
- The crossbar is a square 12.7cm
- Printed initial “SENADI”ON BOTH SIDE TOP
CROSSBAR.

16 TROLLEY FOR STEEPLECHASE HUDLE - Made from Aluminium 1 pc


- It provides space for one set hurdles.
-It is equipped with 200mm wheels.
- The Trolley can fit for steeplechase hurdle,
17 MOBILE TWO-WHEEL HURDLE CART - Made from aluminium 10 pcs
- Dimension: 47” x 25 “ x 10”
- Fit for 10 hurdles
18. MOBILE ALUMINIUM DISCUS CART - Lightweight welded aluminium frame 1 pc
- Store and protect up to 36 discii
- Hold up to 36 discii
-Dimension: 5’L x 2’W x 3’ H
- Mobility
- Front swivel semi-pneumatic wheel casters
- Convenient handle
- 8” fixed wheel
- 8” swivel wheel
19 MOBILE ALUMINIUM SHOTPUT CART - Lightweight welded aluminium frame 1 pc
- Store and protect up to 36 shots
- Hold up to 36 shots
- Mobility
- Front swivel semi-pneumatic wheel casters
- Convenient handle
-Dimension : 5’L x 2’W x 3 ‘H
- Double floor
- 8” fixed wheel
- 8” swivel wheel
20 MOBILE ALUMINIUM JAVELIN RACK - Hold up to 20 jevelins on the field. 1 pc
- Aluminum frame contruction
-Soft poly-top cushions implements while keeping
them secure
-Dimension : 5’L x 2’W x 3 ‘H

-
21 MOBILE ALUMINIUM HAMMER RACK - hammers hang to prevent kinks or bends in wires. 1pc
-Hold up to 16 hammers.
-Dimension : 5’L x 2’W x 3 ‘H

-
22 TAKE OFF BOARD COMPETITION - Take-off board “ three in one ( 122 x 34 x 10 cm) 2 set
“ THREE IN ONE” - Take-off board can be used in tree separatebways:

1. Take-off for competition, reversible profile with an


inlay for indicator board,
2. Take-off board for school sport or training. In this
case the reversbile profile just has to to be turned
round
3. Take-off board used a blanking board

- The aluminium carrier profile of the “ tree in one”


take-off board is covered with a hardened running
track sythetic.
- Board the running track synthetic and the white
plastic on the take-off surface are a additionally UV
stabilised to prevent the colours from fadling

23 TAKE OFF MARKERS -Two 18”sq pannels with bold silscreened lines to 3 pairs
help athletes locate take-off board for long jump and
triple jump.
-Aluminium ”A-frame” design
- Set of 2 take-off markers.
24 MOBILE STARTING BLOCK CART COMBO - Made from aluminium 2 pcs
- 8 units adjustable table track starting block
- Mobile
-FW- 8” fixed wheel
-SW- 8” swivel wheel

25 STELL DISCUS - Stainless steel rims and plastic side 1kg - 10 pcs
- wieght 1 kg and 1.5 kg 1.5kg- 10 pcs
26 BRASS SHOTS - Solid brass turned on CNC lathe within 1/1000 2.72kg- 7 pcs
tolerance of physical diemension 3kg - 7 pcs
- Weught -2.72kg 3kg, 4kg, 5kg 4kg- 7 pcs
5 kg -7 pcs
27 ALUMINIUM TOE BOARD - Cast aluminium models all rule specifications 2 pcs
- Available for level or recessed throwing area.
- Custom silkscreen .

28 JAVELIN - Made from FULL CARBON with galvanizes steel 500g- 7 pcs
head. 600- 7 pcs
- The cord is a synthetic core in cotton plait.
Weight/ colour
500 g- Pink
600g- Orange
29 TEAM WINNER PODIUM - Made from aluminium 1 set
- 3 part :
1. 200cm x 60 cm x 50 cm
2. 200cm x 60 cm x 40 cm
3. 200 cm x 60 cm x 30 cm
- The podium is white powder coated.
- The top ssurface is covered with EPDM rubber.
- The parts are labelled with the respective numbers
1, 2, 3
30 INDIVIDUAL WINNER PODIUM - Made from Aluminium. 1 set
- 3 part.
1. 22”x 22”x 19”
2. 22”x 22” x 16”
3. 22” x 22” x 13”

- The podium white powder coated.


- The parts are labelled with the respective numbers
1, 2, 3.

31 SECTOR MARKER TAPE - Plastic marking tape for limiting sector . White 65m- 6
- spec /colour pcs
1. White 65m x 5cm White 25m- 2
2. White 25 m x 5 cm pcs
3. Yellow 25 m x 5 cm Yellow25m-2
- pcs
32 RUNNING TRACK DRYING MACHINE - Water absorbing roller and then release into 1pc
plastic bucket
- Roller width 80 cm
- Capacity bucket 17 letres ( weight about 50kg)
33 ALUMINIUM RELAY BATON - 11.5” x 1.5”. X 1.4” 4 dozen
- Weight 2.4 ounce
-Made from aluminium
34 RUNNING SPIKE SHOES - Made from PU leather and fabric Size/quantyty
-Rubber shoes. 36” - 10 sets
Europe size: 38” -10 sets
36,38.40.42.44 40”-10 sets
42” - 5 set
44”- 5 set
35 RUNNING VEST - Material - Polyester SIZE/QUATYTY
- ORANGE/ WHITE COLOUR
-Gnder- UNISEX
Type- Suit S - 30 PCS
- Dry Fit M - 20 PCS
- Asian Size: L =20 PCS
S,M,L,XL XL - 10 PCS
- PRINTED “HiP TRACK & FIELD” BOTH SIDE ( FRONT
& BACK )
36 RESISTANCE BANDS - RED BANDS 10 pcs
- 2-16 kg resistance
- circle lenght -208 cm
-Thickness- 0.45 cm
-Widgth- 1.27 cm

-PURPLE BANDS - 10 pcs


-11 - 36 kg resistance
- circle lenght -208 cm
-Thickness- 0.45 cm
-Widgth- 2.86 cm

37 WEIGHT TRAINING HURDLES - Pro weighted heavy-duty plastic training hurdles Hight/QTTY
are tip-resistant and optimum stability.
- Hight- 6”.9”,12” hurdles for countless drill 6” - 4 set
- Have Nylon carrying beg. 9” - 4set
- Set of 6 12”- 4 set
38 POWEL TRAINING SLED WITH BELT - Sled and attachment set available separately. 5 pcs
- Round tubing allow for smooth slide with less field
damage.
- Post holds up to 180 lbs
- Made from strong welded steel.
- Dimension: 37”L x 18”W x 9”W

- Beltadjust up to 42” waist w/hook & loop closure

39 BUMPER PLATE - Made from rubber. Weight/ QTTY


- Dimensions : 450mm diameters and 2” stailess
steel insert. 5kg - 10 pcs
- Weight : 5kg, 10kg 10kg- 4 pcs
40 DUMMBBEL - Set of 2 Weight/QTTY
- Weight 1kg. 2kg 1kg - 10 set
2kg - 5 set
41 ALUMINIUM BARBELL BAR - Lenght 72” 5 pcs
- Weight 7.5kg
- Handle Diameter 28mm
- Bearing: 2
42 ANKLE-WRIST WEIGHT - SET OF A PAIR 15 sets
- Dimensions: 5” x 9” x 12”
- Weight 2.5 lbs each
43 SPEED HARNESS - With shoulder harness and medium tubing, fit up 5 set
56” chest, 160lbs
- 2 shoulder harnesses
- 20 feet of fully-sheathed slastic resistance tubing.
- Dimension : 5” x 9” x 12”
- Weight 4.0 lbs
44 SUPER BUNGIE - 8’L x 1/2” diam, braided rubber bungee 5 pcs
- Nylon belt ( fit 16” to 40” )
- PVC handle
45 THE ACCELERATOR 360 - Includes 2-6” slastic x (R) bungee, 2 thigh cuffs, 1 5 pcs
adjustable swivel belt, and instruction.
- Dimension 6” x 15” x 15”
46 LEG SPEED BUILDER - set a pair. 5set
- Dimension: 5” x 9” x 12 “
47 PRO PADDED UPPER BODY HARNES - 2” wide 10 pcs
- Adjustable
- Nylon with neoprene padding.
- D-ring connector
- Dimension : 5” x 9” x 12”

48 LONG JUMP SAND PIT COVER - Made from PVC netting fibre. 2 pcs
- Material is spike proof.
- Dimesion : 4 meter x 8 meter
49 DIGITAL STOP WATH - 100 Lap memory, stroke rate, time, day date 30 pcs
display.
- Measures up to 9hrs 59 secs 99/100ths sec. Triple
display show.
- Cumulative and lap split time to the last split, and
cumulative running time
- 100 cumulative and split time can be stored in
memory. Time out ( start, stop, resume) function is
also include.
50 MEASUREMENT TAPE ( STEEL) - Made from steel with a white coating. Lenght/QTTY
- The handle is made from impact resistant PVC.
- Lenght. 10m- 3 pcs
1. 10m 20m - 3pcs
2. 20m 30m - 3pcs
3. 30m 50m- 3pcs
4. 50m 100m - 3 pcs
5. 100m
51 MARKER CONES, SET OF 50 - Made from durable plastic. 4 set
= Set of 50 pieces.
- The cones are stackable and measure a diameter of
approximately 18cm. The hieght is approximately
7cm.
- With carrying rod.
- Colour is yellow. White, blue, red, green
52 RUNNER UP MAKER - Made from iron. 50 pcs
- The markers are available in assorted colours

53 KETTLEBELL - KETTLEBELL 4 KG ( 18cm L x 10cm W x 18cm H ) 4kg - 6 pcs


-KETTLEBELL 6 KG ( 20cm L x 11cm W x 20cm H ) 6kg - 4 pcs
-KETTLEBELL 8 KG ( 20cm L x 12cm W x 22cm H ) 8kg - 2 pcs
-KETTLEBELL 10 KG( 20cm L x 13cm W x 23cm H ) 10kg - 2 pcs
54 - Features fold-down gates, pneumatic tier and 500 1 pcs
TRACK WAGON lbs weight capacity.
- Measures 48”L x 24”W x 12” D x 25”H

55 Lenght - 24” 2 pcs


BUMPER PLATE RACK Width - 24”
Height - 38”
Steel Notes - 2x2” 11 gauge steel
Foot Print - 24” x 24”
56 BACKPACK BLOWER WITH TUBE - Displacement : 64.8 cc 2 pcs
- Engine Power: 2.0 kW ( 2.7 bhp)
- Weight : 10 kg
- Full Capacity 1400 cc ( 47.3 oz)
- Air Volume with tube : 810 m3/h ( 477 cfm)
- With out tube ; 1380m3/h ( 812 cfm)
- Air Velocity 81m/sec ( 181 mph)
57 ARTIFICIAL GRASS - Material: Plastic. 1 pc
- Specifition :
Pile Hiight : 35mm
Gauge : 3/16”
Stitch Rate: 30 cm
Saiz : 2 m x 50 m
58. WALKIE TALKIE -Frequnency , UHF 400-470MHz. 20 pcs
- 16 channel.
- Enables to connect with each other in long range
of abaut 2 milesi croweded area and up 5 miles i
awide outdoor range.
-DCS and CTCSS Function.

59 EMERGENCY ALARM SOUND ANG LIGHT - Voltage DC24V / AC220V 2 set


- Horn 20W
- Volume 120db, 8 level adjustment
-working current, 10m
- Function, sound and light
60. LARGE FLAT BED TROLLEY - Aluminum Construction, 2 pcs
- Overall size : 3m x 1.5m x 30 cm
- Handle for pulling manually.
- With towing eye for tractor

61 CANOPY - Specification : 10’ x 15’ 6 pcs


- Aluminum frame.
- Diameter frame 32mm
- 5 height setting.
- Heavy-duty roller
- Fabric : DenierPolyester
62 IFLATABLE ARCH W 24’ H 14’ 2 PCS
Material PVC COATED
With Air Blower

* JUST PICTURE ILLUSTRATION

You might also like