Professional Documents
Culture Documents
SPN FMI PARAMETERS FMI Description PARAMETER Description Adv4 Adv3 Adv2R Basic 2 Basic R
Machine Ignition Voltage Missing Current Below Normal or Open Input Speed detected but no voltage received from
521501 5 X X X X X
at Clutch Controller Circuit engine ignition switch.
Clutch Oil Temperature Fault Data Valid but Above Normal Clutch disengaged after 15 minutes of a temperature
521507 16 X X X
while Engaged Operating Range fault being reported.
Current Below Normal or Open PWM Coil may be defective with too high of a
521510 5 PWM Coil Fault X X X
Circuit resistance or a wire may be cut.
Current Above Normal or PWM Coil may be defective with too low of a
521510 6 PWM Coil Fault X X X
Grounded Circuit resistance or a wire may be grounded.
Current Below Normal or Open ON/OFF Coil may be defective with too high of a
521511 5 ON/OFF Coil Fault X X X X X
Circuit resistance or a wire may be cut.
Current Above Normal or ON/OFF Coil may be defective with too low of a
521511 6 ON/OFF Coil Fault X X X X X
Grounded Circuit resistance or a wire may be grounded.
Equipment Safety Fault while Current Below Normal or Open Switch not returning voltage to the controller. Clutch
521512 5 X X X X
Disengaged Circuit can not be engaged.
Equipment Safety Fault while Current Below Normal or Open Switch not returning voltage to the controller. Clutch
521513 5 X X X X
Engaged Circuit will not automatically disengage due to this fault.
Engagement Prevented because Data Valid but Above Normal Clutch will not engage if the engine speed is above
521514 16 X X X X X
of Engine Speed Operating Range 1100 RPM.
Engine Stalled while Attempting Data Valid but Below Normal Engine speed went to zero or was lost while
521515 18 X X X X X
Engagement Operating Range attempting to engage the clutch.
Disengagement Prevented Data Valid but Above Normal Clutch will not disengage if the engine speed is
521516 16 X X X X X
because of Engine Speed Operating Range above 1200 RPM.
Data Valid but Above Normal While attempting to engage, the clutch overload had
521518 0 Clutch Overload X X X
Operating Range not completely dissipated.
Page 8 of 11