You are on page 1of 3

LIST OF IS CODES

S No IS Code No Description
Sl No.1 to Sl No.7 are Design of Gates
1 IS 11388-2012 Recommendations for design of Trash Racks for Intakes
2. IS 2062-2011 Hot Rolled Medium and High Tensile Structural steel -
Specification
3. IS 4622-2003 Recommendations for Structural Design of Fixed-Wheel
Gates
4. IS 9761-1995 Hydro Power Intakes-Criteria for Hydraulic Design
5. IS: 800
6. IS 1570-1985
7. IS 11855-1986

IS11639:1986 part I
5. IS11639:1986 part 2 Structural Design of Penstocks
IS11639:1986 part 3
Is 4800
6.
7. IS 7396 Criteria for Hydraulic Design of Surge Tanks
8. IS 4800

9. IS 456-2000
IRC-6-2014
IRC-21-2000
IRC-18-2000 Design of Iconic Bridge codes for Precast Post-Tension
Pre stressed Concrete-I Girder
concrete –
Tata MC Gr hill
10 1. IS 2002-2009 Steel Liner

2.IS11639-
3.IS 2062-
Sl No.11 to Sl No.15 for design of Tail Race Channel
1 IS 9451-1994
2 IS 5256-1992
3 IS 4558-1995
4 IS 13143-1991
5 IS 10430-2000
6 IS 3873-1993
7 IS 3384
Tunnelling Methods

1. IS 15026-2002 Tunnelling Methods in rock masses


2. IS 13365 – 1992 Guidelines for quantitative classification systems of rock
(Part-2) mass
3. IS 5878-1971 (Part 2)
3. IS 5878-1971 (Part 4) Tunnel Supports
4. IS 5878-1971 (Part 6) Steel lining
5. IS 9012-1978 Recommended practice for shotcreting
6. IS 4880 (part 6) Code of practice for design of Tunnels

Stability Analysis of Earth Dams


1 IS 7894-1975 Stability Analysis of Earth Dams

Design of Truss Members


1 IS 800-2007 Steel code
2 IS 875-2015 Design Loads (Part 3 wind loads)
3 IS 1161 Pipe sections
4 IS 801 Cold form Design steel
5. IS 802 Over Head transmission lines
5 SP 62 Building Construction Practices
6 SP64 Explanatory Hand Book for IS 875
7 IS 808 Hot rolled steel beams, Columns, channels and Angle
Sections
Tunnelling methods in Rock masses

You might also like