Professional Documents
Culture Documents
S P E C I F I C AT I O N S H E E T
Series TC1
The FEBCO SeriesTC1 is designed for the following applications: Test cock for backflow preventers Isolation valve for gauges Balancing Valve for gauges
Features
Bronze body Full port design for low pressure drop. PTFE stem packing seal, thrust washer and seat. Quarter-turn open or close with slot for coin or screw driver to operate. Ideal for throttling and balancing applications of non-abrasive fluids where flow is 20% to 100% of valve capacity. Low operating torque. TC1
WEIGHT
F G mm in. mm lbs. kgs. in.
F A
B mm in. mm
mm
18
in.
134 178
45 48
1116
11 16
17 17
1116
11 16
17 17
.06 .06
.03 .03
Dimensions shown are nominal, allowance must be made for normal manufacturing tolerances.
FEBCO product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact FEBCO Technical Service. FEBCO reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on FEBCO products previously or subsequently sold.
USA: 4381 N. Brawley Ste. 102 Fresno, CA 93722 Tel. (559) 441-5300 Fax: (559) 441-5301 www.FEBCOonline.com Canada: 5435 North Service Rd. Burlington, ONT. L7L 5H7 Tel. (905) 332-4090 Fax: (905) 332-7068 www.FEBCOonline.ca
ES-F-TC1 0630
2009 FEBCO