You are on page 1of 34

Totally Integrated Automation

SIMATIC S7-300
The universal
mini PLC system
with a wide range
of functions

SIMATIC S7-300
Contents
Highlights / Positioning

n Highlights / Positioning
n The CPUs
n The Modules
n Design and Installation
n Communications and Human-Machine Interface
n Configuring, Programming, Maintenance
n Summary

! Management Summary
n

SIMATIC S7-300
SIMATIC S7-300
Within the System Family
High-end range/
medium range
S7-400

The universal
Mid- and low-end mini PLC that
performance range
S7-300
gets on with
the job at top
Micro PLCs speed
S7-200

+ Programming devices
+ STEP 7 software
+ Communication
+ Human-machine interface

SIMATIC S7-300
!
SIMATIC S7-300

SIMATIC S7-300
!
SIMATIC S7-300 –
Greatness is not a question of Size!
The CPU only measures 80x125x130 mm

èThe compact, universal machine controllers

SIMATIC S7-300
!
SIMATIC S7-300 –
Easy-to-Use!
n Assembly and installation
n No slot rules
n Integrate communications
n Configuration and programming
with STEP 7

è Time is saved on configuration,


software generation,
installation and start-up

SIMATIC S7-300
!
SIMATIC S7-300 –
Fast, Powerful and Universal!
n Instruction processing
only 0,1 to 0,8 µs per binary instruction
n Comprehensive instruction set
with powerful instructions
n Expandable:
n up to 1024 inputs/outputs (centralized)
n up to 16 K inputs/outputs (distributed)

è Future-oriented, innovative
automation solutions

SIMATIC S7-300
!
SIMATIC S7-300 –
Extremly Multi-Faceted and Flexible!
n Made-to-measure CPU performance
- from entry-level to high-performance CPU
n A module variety that leaves nothing to be desired -
the extensive I/O module kit
n Expandable up to four tiers
configurations
n Communication via networks
and point-to-point links
n Even for extremely harsh
environmental conditions
è Individual, low-cost solutions

SIMATIC S7-300
!
Contents
The CPUs
n Highlights / Positioning
n The CPUs
n The Modules
n Design and Installation
n Communications and Human-Machine Interface
n Configuring, Programming, Maintenance
n Summary

SIMATIC S7-300
CPUs in the Fast Lane
n High processing power, e.g.
High Power CPU 318-2
n only 0,1 µs per binary instruction
n two 12 Mbit/s interfaces onboard
n Central data management on the CPU
n Maintenance-free thanks to retentive memory
n Communication via the integral interfaces MPI
(multipoint interface) and PROFIBUS-DP
n CPUs 312/314 IFM with
n integrated technological functions
n onboard I/O

SIMATIC S7-300
The CPUs –
Made-to-Measure Performance (I)

CPU 313 CPU 314 CPU 315 CPU 316-2DP CPU 318-2
(CPU 315-DP)
Instructions/Data 4K/- 8K/- 16 (21) K / - 42 K / - 84 K / 256 Kbyte
User memory 12 Kbyte 24 KByte 48 (64) KByte 128 KByte 512 Kbyte
Free addressing no no yes yes yes
DI / DO 256 1024 1024 1024 1024
AI / AO 64 256 256 256 256
Processing time/ 0,6 ms 0,3 ms 0,3 ms 0,3 ms 0,1 ms
1 K bin. instructions
Bit memories 2048 2048 2048 2048 8192
Counters 64 64 64 64 512
Timers 128 128 128 128 512
(PROFIBUS- PROFIBUS- PROFIBUS-DP
DP interface DP interface (Master/Slave)
master/slave master/slave with 125 stations;
with 64 DP- with 64 DP- MPI usable as
stations) stations DP (12 MBaud)

SIMATIC S7-300
Die CPUs –
Made-to-Measure Performance (II)

CPU 312 IFM CPU 314 IFM

Instructions 2K 10 K
User memory 6 KByte 32 KByte
Free addressing no no
DI / DO 256 1024
AI / AO 64 256
Processing time/ 0,6 ms 0,3 ms
1 K binary instructions
Bit memories 1024 2048
Counters 32 64
Timers 64 128
For integrated 10 DE / 6 DA 20 DE / 16 DA /
functions 4 AE / 1 AA

SIMATIC S7-300
Test and Diagnostics Functions
n System diagnostics:
n Fault diagnostics from CPU to I/O
n Internal CPU services (e.g. error message with time stamp)

n Process diagnostics:
n Monitoring critical process signals at the program level
n Simply assign parameters using S7-PDIAG and ProAgent
n CPU generates messages automatically for S7 HMI
è So that your service personnel can diagnose
the problem sooner

SIMATIC S7-300
S7-300
Communications Integrated:
MPI / PROFIBUS-DP Interface
PG (Master)
n Interfaces OP (Maste
n MPI integrated into every CPU
n DP in 315-2DP, 316-2DP, 318-2
ET 200U (Slave)

n Programming from any point ET 200M


(Slave)
in the network (Routing)
ET 200X (Slave)
n HMI services for connection of OP/OS ET 200B/L
(Slave)
n No additional programming
n Minimum CPU cycle load

n Communications functions for S7 PROFIBUS-


DP
n Low-cost communication without S7-300

the need for additional hardware

SIMATIC S7-300
CPU 312 IFM, CPU 314 IFM
with Integrated Functions
IFM
n Ready-to-use solutions for simple
engineering tasks
n Inputs/outputs integrated on the CPU
n Interrupt inputs for fast response to process signals
n High-speed up-and-down counter
n Included in package
n Technology blocks for counting, frequency
measurement, positioning, closed-loop control
n Standard displays for operator panels

è Saves engineering costs, time


and mounting space

SIMATIC S7-300
Contents
The Modules
n Highlights / Positioning
n The CPUs
n The Modules
n Design and Installation
n Communications and Human-Machine Interface

n Configuring, Programming, Maintenance


n Summary

SIMATIC S7-300
Modules for the S7-300
Power Supplies
n classified according to capacity
Signal modules
n for digital und analog signals and Ex(i) zones
Point-to-point CPs
n for RS232(C), 20mA, RS422/485
Function modules
n for high-speed counting, positioning and
closed-loop control
M7-300, the automation computer
n for standard software and real-time tasks
è Flexible combinations for all applications

SIMATIC S7-300
Signal Modules to Suit Any Requirement
Digital Digital Analog Analog
inputs outputs inputs outputs

Voltage/ DC 24 V DC 24 V +/- 80mV...10 V, +/- 10 V, 0...10 V,


current range AC 120 / 230 V AC 120 / 230 V +/-3.2mA, +/- 20 mA,
0.5 / 1 / 2 A 0/4...20mA etc. 0/4...20mA, etc.

Channels 8, 16, 32 4, 8, 16, 32 2, 4, 8 2, 4


(optically- electronic/relay with integrated
isolated) linearization

Sensors Switches, 2-,3-,4-wire resistor


2-wire BEROS (Pt100),
thermocouple, etc.

Resolution 9 to 16 bit 12 to 16 bit


incl. sign bit incl. sign bit
Encoding time 2.5 ... 100 ms 0.8 ms

Ex(i) Namur/ Ex(i) Namur/ Ex(i) Ex(i) Ex(i)


Diagnostics yes yes yes yes

SIMATIC S7-300
Point-to-Point CPs for Special Interfaces
Robot
n 1 or 2 interfaces, Porgramming
controls

up to 76 kbit/s device, PC,


computers
n Different physical
transmission Opto-electronics
Scanner, barc
environment reader, identif
system
n Standard or
custom-specific Printer
protocols
S7-300
S7-300

SIMATIC S5 and also PLCs Weighing system


from other manufacturers controllers

SIMATIC S7-300
Function Modules –
The Intelligent I/O for the Specialists
n Function modules
for a wide range of engineering tasks
è Counting, positioning, closed-loop control
n Numerous special functions –
one Parameterization, integrated in STEP 7
è Whether you are setting machine data, traverse
programs or numerical values
n Central data management
è Parameterization of the whole progammable
controller via one interface
è Insertion and removal of modules without losing
data or wasting time

SIMATIC S7-300
Contents
Design and Installation
n Highlights / Positioning
n The CPUs
n The Modules
n Design and Installation
n Communications and Human-Machine Interface

n Configuring, Programming, Maintenance


n Summary

SIMATIC S7-300
A Modular System
with Compact Design
n Rugged, enclosed modules
n Integrated, easy-to-connect
backplane bus
n High module density,
up to 32 channels per module
n Low mounting depth due to
recessed and covered
connectors and plugs
n Power supply modules in the case of
AC mains connection for supplying the
S7-300 and sensors/actuators

SIMATIC S7-300
Mounting Made Easy
n Simply snap the module on
to the mounting rail
n No slot rules
n No jumper settings required
on the module
n Horizontal or vertical mounting
n Front connectors with srew or
spring-loades terminals
n Self-coding front connectors
make sure that the right connector
is plugged in after module replacement

SIMATIC S7-300
SIMATIC TOP Connect –
The User-Friendly Wiring Solution
n Saves the intermediate terminal
in the switchgear cubicle
n Direct connection of sensors/
actuators using 2, 3 and 4-wiring
techniques
n Terminal blocks
Dista
n can be connected to standard I/O modules max
via front connectors with prefabricated cables
n with integrated relays
è Simple and polarity-reversal-
proof connection of actuators
and sensors
TOP Connect: Terminal blocks

SIMATIC S7-300
Multi-Tier Expansion via
Interface Modules
n Two-tier configuration
n up to 16 modules in central
controller and expansion unit up to 10 m

Expansion units
è Low-cost solution

n Four-tier configuration up to 10 m
n up to 32 modules in central
controller and up to 3
expansion units
è Flexible solution up to 10 m

Central controller

SIMATIC S7-300
Contents
Communication and HMI
n Highlights / Positioning
n The CPUs
n The Modules
n Design and Installation
n Communications and Human-Machine Interface

n Configuring, Programming, Maintenance


n Summary

SIMATIC S7-300
With S7-300 to all Communication Networks

Data
Communication Field
Data and Field Communication
Communication

PROCESS FIELD BUS

SIMATIC S7-300
SIMATIC Human-Machine Interface –
The Window to Your Plant/Process /Machine
Panel PC oder OS
n SIMATIC Panels:
n Push Button Panels,
Text Displays, WinCC
Operator Panels,
Touch Panels MPI
or Multi Panels via MPI or
PROFIBUS-DP
n Multiple panels for an S7-300
n One panel for several Multi Panels
automation systems Push
Button
n ProTool/Pro for simple PC-based Panels

visualization tasks
Text Displays,
n WinCC - the powerful process Operator Panels,
Touch Panels
visualization system
SIMATIC S7-300
Contents
Configuring, Programming, Maintenance
n Highlights / Positioning
n The CPUs
n The Modules
n Design and Installation
n Communication and Human-Machine Interface

n Configuring, Programming, Maintenance


n Summary

SIMATIC S7-300
Programming and Configuring –
Made Easy with STEP 7
n Easy to use
n Object-oriented, intuitive user-interface
n Configuring instead of programming
n Uniformity across the family -
common database
n Powerful functions -
e.g. module parameters set by software
n We work according to standards!
n Programming languages in conformity
with IEC 1131-3
n Windows 95/98/NT operating system

SIMATIC S7-300
Easy Maintenance
n Easy changeover of user program
n Memory Card
n Update Device
n Download via teleservice

n Maintenance-free through battery-less


operation
n Retentive feature for data, flags, timers and counters
n Additional retentive feature through
accumulator/lithium battery

n Easy, reliable module replacement without


the need for a programming device
n Module parameters are stored centrally in the CPU
n CPU initializes newly replaced modules

SIMATIC S7-300
Contents
Summary
n Highlights / Positioning
n The CPUs
n The Modules
n Design and Installation
n Communication and Human-Machine Interface
n Configuring, Programming, Maintenance
n Summary

SIMATIC S7-300
SIMATIC S7-300 –
the Modular, Universal Mini PLC System
n Easy-to-use
èTime is saved on installation
and engineering

n Fast, powerful and universal


èFuture-oriented, innovative
automation solutions

n Extremly multi-faceted and flexible


èIndividual, low-cost solutions

SIMATIC S7-300
Modular mini PLC
With a Wide Range of Functions!

Totally Integrated
Automation
with
SIMATIC S7-300

SIMATIC S7-300

You might also like