Professional Documents
Culture Documents
for
SME/E-smith-6.01.01 Server
HARDWARE
Components needed:
1 computer (Pentium III or higher, 256M Ram or higher, 10G Drive, CD, Keyboard,
Monitor, network connection to the Internet).
SOFTWARE NEEDED
…OR…
Create the installation cd from the CD Image (*.iso) that can be downloaded from the
following location.
SETUP PROCESS
1) When prompted for the admin password, type in a password, press [ Enter ]
2) Retype the password, press [ Enter ]
3) Tab to "Yes" press [ Enter ]
4) Enter a valid IP Address (or a domain name if you have one) from your local
network for the domain name.
5) Tab to "next" and press [ Enter ]
6) Type in a server name (i.e e-smith, etc.) tab to "Next", press [ Enter ]
7) Confirm that your Ethernet card(s) has(have) been detected.
Press [ Enter ] to select.
8) Enter the IP Address you used for the domain name or one on your network.
9) Tab to "Next" and press [ Enter ]
10) Enter the subnet mask for your network (255.255.255.___)
11) Tab to "Next" and press [ Enter ]
12) Operation Mode: select Server Only
13) DNS: Leave blank, tab to "Next" press [ Enter ]
14) Proxy: NO - tab to "Next" press [ Enter ]
15) Status to e-smith: NO press [ Enter ]
16) Console: Login arrow down to login, tab to "Next" press [ Enter ]
17) Notify updates by e-mail, (enter address or not) Press [ Enter ]
18) Activate Configuration: YES press [ Enter ]
19) Wait….. for reboot.
20) You are now ready to install the ISDW software.
Page 2 of 2