Professional Documents
Culture Documents
Project
C1-22 : Functional Materials
18. Development of functional copolymers based on lactic acid.
19. Polysaccharide-based Mixtures as Rheology Modifiers : Phase I Study of Morphology and
Rheological Behavior.
20. Study of effect of nano-additives on polyethylene melt flow through die during fabrication.
21. Study of approach for embedding particles on fibers and fabrics for special surface
functions.
22. Structural Control of Micro and Nano-porous PP-based Membrane by Extrusion and
Stretching.
Project
C1-22 : Functional Materials
23. Functional biopolymers produced by fungi of Thailand for food and medical applications.
24. Synthesis of Novel Polymers containing [5]-Helicene Derivatives and their usage in Organic
Light-Emitting Diode
25. Synthesis of geopolymer using rice husk silica and Al-waste from aluminium industry.
26. Relationship between Chemical Compositions, Powder Forming, Microstructures and Mechanical
Properties of Sintered Frictional Materials.
27. Study on Nitrogen Solubility in Ferritic Steels.
28. Preliminary Study on Aluminium Foam Production Using Melt Route-Phase 2.
29. The Development of Freeze Casting Process for Environmentally Friendly and Energy-Saving
Production of Powder Materials.
30. An Investigation of Interfaces between organic and and inorganic and their effects on Electronic
Properties of polymer solar cells and organic transistors.
31. Mass and electrical transport study of lanthanum and cerium based conducting oxides.
32. Study on thin film fabrication for solid oxide fuel cells.
33. Understanding the effects of coal based gas contaminants and degradation mechanisms
on SOFCs.
96 34. Development of Ceramic catalyst for upgrading synthetic-gas production.
Annual Report 2009 MTEC
Project
C1-22 : Functional Materials
47. Synthesis of mesoporous silica SBA-15 for mixed matrix polysulfone membranes.
48. The synthesis of niobate compounds by hydrothermal process for Cr+ and methylene blue
adsorption.
49. Development of PEG/PMMA binder for powder injection moulding of ferrites.
50. Preparation and characterization of magnetic micro-carriers for protein purification.
51. Property Control of TiNi Based Shape Memory Alloys For Dental Applications in Thailand.
52. MCM-41 Synthesis and Modifications for Carbon Dioxide Capture.
53. Nano-calcium carbonate production by precipitation.
54. Development of chito-organoclay used as a functional material.
Project
C1-22 : Biomedical Materials
77. In vitro and in vivo interaction of calcium phosphate coating by sol-gel method to osteoblast
cells and bone tissue.
78. Development of new resin modified glass ionomer for dental application.
79. Development of synthesizing and forming biphasic calcium phosphate.
80. Surface plasmon resonance study of recombinant BMP-2 protein release from hydroxyapatite
carriers.
81. Cell-biomaterials interaction: The expression of bone-related proteins in vitro.
82. In vitro study on biodegradable polymer scaffolds for cartilage tissue engineering.
83. Study on preparation of new antibacterial materials suitable for use as wound dressings.
98 84. Study on microparticles of silk fibroin/chitosan blends prepared by water-in-oil emulsion solvent
Annual Report 2009 MTEC
Project
C1-22 : Corrosion
93. Surface Modification of Metals Using Active Screen Plasma Thermochemical Diffusion Process.
94. Development of a coating material and process to enhance corrosion resistance of steel
for biodiesel storage applications.
95. Study on Conditions for Oxide Removal from Sintered Stell Surfaces using Powder Metallurgical
Route.
Annex
Project
C1-22 : Corrosion
96. Anti-Galling for Metal Forming Die.
97. Effective Study of Wear on Biodiesel-fueled Engine Parts.
98. The Study of Atmospheric Corrosion Behavior of New-generation Stainless Steels with Various
Surface Conditions Exposed to Thailand’s Climate
99. Wear resistive performance of thermal spray nanocomposite coatings: A role of nano-particulates
reinforcements.
100. Studies of mechanical properties and tribological behaviour of SS316L/h-BN self-lubrication
composites.
101. Effect of shot peening on an activation energy of boriding process.
Project
C1-22 : Material Testing & Analysis
112. Development of an unbalanced magnetron sputtering coater.
113. Research and Development of Convergent Beam Electron Diffraction Technique for Materials
Science.
114. The Study of Retained Austenite Phase Content in Steel / Texture Analysis in Aluminum Foil by
X-Ray Diffraction Technique/X-Ray Diffraction Analysis Tutorial for Staff
115. Simple Detection of Heavy Metal Ions.
116. Development of biomedical and microbial testing methods.
Project
C1-22 : Material Testing & Analysis
117. Development of sample preparation and microstructure investigation of stainless steel tungsten
carbide composite fabricated by powder metallurgy.
118. Investigation of Particle Size Measurement of Rice Husk Ash by Laser Diffraction Technique with
Wet Analysis.
119. Study method for determination of distribution of polymer blend by FT-IR Imaging Microscopy.
120. The development of microstructural and x-ray microanalytical technique for non-and conductive
materials by the utilization electron microprobe analytical technique.
121. Study of beta crystallization in regrind polypropylene by Differential Scanning Calorimeter
(DSC).
122. Development of an analytical technique for the determination of eight different polycyclic
aromatic hydrocarbons (PAHs) in extender oils.
123. Mechanical Characterization via Experimental and Computational Nano-Indentation.
124. Online diagnosis systems for fatigue detection of SMA-based control valve.
125. A Development of Coefficient of Friction Tester with Adjustable Temperature for Plastics Sheets
and Films.
126. Use of ball on disc test to evaluate the localized fatigue properties of materials.
100 Project
Annual Report 2009 MTEC
C1-9 : CAD/CAE
127. Finite Element Analysis to Predict an Effect of Tread Pattern on Solid Tire Wear.
128. Study and Design Mesh Generation Program for Heat transfer Analysis by Artificial Neural Net
work.
129. Development of an Unstructured Finite Volume Program for Conjugate Heat Transfer Analysis.
130. Finite Element Software Development for the Problem Analysis of Mechanics of Solids and Heat
Conduction
131. CFD Software for Three-Dimensional Complex Geometry Flows.
132. Biomechanical study of the tendons around knee joint.
133. Compulational Modeling of Sacrificial Anode Cathodic Protection System.
134. Rotational Molding Machine Development for 20 Cubic Meter Plastic Silo Production.
135. Briquette Machine Development for Gasification Process.
136. Mould Design and Making for Metal Injection Moulded Cervical Plate and screw.
137. Steel Sheet Testing Tool Development Using Water Under High Pressure.
138. Contracted research on Development of Tool-Path Planning and Command-Code Generation for
Robot Thermal-Spray Coating System.