You are on page 1of 3

Landscape Design Software - Adding a Slope Page 1 of 3

Home Products Support Guarantee About Us Contact Us Site Map FAQ News

Landscape Design Software

Contents Index Previous Next

Adding a Slope

You can create simple or complex slopes, all using the same object. A simple slope is basically a ramp. The slope is added
by defining the start point and direction. Next, the rise and run can be adjusted to determine the angle/grade. You can
reposition or rotate the slope as needed to match your client's property.
To add a simple slope:
1. Click Add Slope.
2. Click to set the start point.
3. As you move the cursor, an arrow will show you the direction of the slope. Click to set the direction.
Below is an example of a simple slope:

A complex slope is one that is curved rather than straight. You can insert and move points to get the shape you want, and
adjust the rise and run at each point.
To make a complex slope:
1. Create a simple slope as described above.
2. Select the slope.
3. Click Edit Points.
4. To insert additional points, hold Ctrl while clicking on the base of the ramp. See Inserting & Deleting Points for
more information.
5. Select each point and change the point's rise and run as desired. You can also move each point as needed to
obtain the desired curvature.
A complex slope is shown below.

http://www.ideaspectrum.com/help/arch2_help/addingaslope.php 23/03/2011
Landscape Design Software - Adding a Slope Page 2 of 3

A complex slope was used to create the hillside in the following landscape design.

Tips:
Slopes only modify the terrain within the limits of the workspace. However, you can position points outside of the
workspace if needed to obtain the desired shape.
When you are finished changing the slope, lock or hide it to prevent if from being accidentally selected as you
work on other parts of your landscape design. See Show/hide objects and Using Layers for details.
In some situations, you may need to control the order that terrain sculpting objects are applied. See Controlling
the Terrain Sculpting Order for details.
Slopes only support smooth spline curves. You cannot edit the curve type at each point like you can with most
other shapes.
See also:
Slope Properties
Setting Object Properties
Selecting Objects
Selecting Points
Editing Objects

http://www.ideaspectrum.com/help/arch2_help/addingaslope.php 23/03/2011
Landscape Design Software - Adding a Slope Page 3 of 3

Adding Height Grid


Adding a Height Map

Home | Product Comparisons | How we are Different | About Us | Support | Site Map | Contact Us | Links
Copyright © 2011 Idea Spectrum. All rights reserved.

http://www.ideaspectrum.com/help/arch2_help/addingaslope.php 23/03/2011

You might also like