Professional Documents
Culture Documents
This equipment has been tes ted and found to comply with the limits of a Class
B digital devic e, purs uant to Part 15 of the FCC Rules . T hese limits are designed
to provide reasonable protec tion against harmful interference in a residential
installation. T his equipment generates , uses , and c an radiate radio frequency
energy and, if not ins talled and used in accordance with the instructions , may
cause harmful interference to radio communications . There is no guarantee
that interference will not occur in a particular ins tallation.
The content of this user’s manual is subject to be c hanged without notice and
we will not be res ponsible for any mis takes found in this user’s manual. All the
brand and produc t names are trademarks of their respec tive companies .
Table of Contents
Note: The package contents may differ by area or your motherboard version.
1
Motherboard Manual
ITE's "Smart Guardia n" function ITE's "Smart Guardia n" function
Dual C hannel Mo de DDR 2 memory module Dual C hannel Mo de DDR 2 memory module
IDE Ultra DMA 33~100 B us Master Mode Ultra DMA 33~100 B us Master Mode
SATA Data transfer rates up to 3.0 Gb/s. Data transfer rates up to 3.0 Gb/s.
SATA Version 2.0 specification complia nt. SATA Version 2.0 specification complia nt.
LAN 10/ 100/1000 Mb/s auto negotiation 10/ 100/1000 Mb/s auto negotiation
High- Defi nition Audio s upport High- Defi nition Audio s upport
2
945P-A7G/945PL-A7G
945P-A7G 945PL-A7G
Chassis open hea der ( optional) x1 Chassis open hea der ( optional) x1
Board Size 205 (W) x 305 (L) mm 205 (W) x 305 (L) mm
3
Motherboard Manual
Line Out
Mic In 1/
Bass/ Center
Cente r Line In
Re ar Line Out
Side Mic In
Since the audio c hip s upports High Definiti on Audio Specific ation, the func tion of eac h audi o
jack c an be defined by software. T he input / output function of each audio jac k listed above
represents the default s etti ng. However, when c onnecti ng exter nal microphone to the audio
port, pleas e us e the Line In (blue) and Mic In (Pink) audio j ac k.
4
945P-A7G/945PL-A7G
1.6 MOT HERBOARD LAYOUT ( FOR V ER 6.X)
JKBMS1
LGA775
COM1
JCOM1
CPU1
JPRNT1
DDR2_B1
JATX PWR2
JCFA N1
Intel
JRJ45 USB1
945P
or
945PL
JAUDIOF1
JATX PWR1
JA UDIO 1
JCDIN1
Codec PEX16_1
PEX1_1
Intel
ICH7
PEX1_2
Super
I/O BAT1
IDE1
PCI1
BIOS
SATA1 SATA3
PCI2
JCI1(Opt ional)
5
Motherboard Manual
JKBMS1
LGA775
COM1
JCOM1
CPU1
JPRNT1
DDR2_B1
JATXPWR2
JCFAN1
Intel
JRJ45 USB1
945P
or
945PL
JAUDIO2 JAUDIOF1
JATXPWR1
JCDIN1
Codec PEX16_1
PEX1_1
Intel
ICH7
PEX1_2
Super
I/O BAT1
IDE1
PCI1
BIOS
SATA1 SATA3
PCI2
JCI1(Optional)
6
945P-A7G/945PL-A7G
Special Notice:
Remove Pin Cap before installation, and make good preservation
for future use. When the CPU is removed, cover the Pin Cap on the
empty socket to ensure pin legs won’t be damaged.
Pin-Cap
Step 1: Pull the socket locking lever out from the socket and then raise the
lever up to a 90-degree angle.
7
Motherboard Manual
Step 2: Look for the triangular cut edge on socket, and the golden dot on
CPU should point forwards this triangular cut edge. The CPU will
fit only in the correct orientation.
Step 2-1:
Step 2-2:
Step 3: Hold the CPU down firmly, and then lower the lever to locked
position to complete the installation.
Step 4: Put the CPU Fan and heatsink assembly on the CPU and buckle it
on the retention frame. Connect the CPU FAN power cable into
the JCFAN1. This completes the installation.
8
945P-A7G/945PL-A7G
JCFAN1
4
Pin Assignment
1 Ground
1 2 +12V
3 FAN RPM rate
sense
4 Smart Fan
Control
Pin Assignment
1 Ground
2 +12V
JSFAN1 3 FAN RPM rate
3 1 sense
Note:
The JCFAN1 and JSFAN1 s upport 4-pin and 3-pin head connec tor. When connecting
with wires onto c onnectors, please note that the red wire is the positi ve and s houl d be
connected to pi n#2, and the bl ac k wire is Ground and s hould be c onnected to GND.
9
Motherboard Manual
2.3 INST ALLING SYST EM MEMORY
A. Memory Modules
DDR2_B1
1. Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.
2. Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.
10
945P-A7G/945PL-A7G
B. Memory Capacity
For 945P-A7G
DIMM Socket DDR Module Total Memory Size
Location
DDR2_A1 256MB/512MB/1GB *1
DDR2_A2 256MB/512MB/1GB *1
Max memory 4GB.
DDR2_B1 256MB/512MB/1GB *1
DDR2_B2 256MB/512MB/1GB *1
For 945PL-A7G
DIMM Socket DDR Module Total Memory Size
Location
DDR2_A1 256MB/512MB/1GB *1
Max memory 2GB.
DDR2_B1 256MB/512MB/1GB *1
Install memory module of the same density in pairs, shown in the f ollowing table.
For 945P-A7G
Dual Channel Status DDR2_A1 DDR2_A2 DDR2_B1 DDR2_B2
Enabled O X O X
Enabled X O X O
Enabled O O O O
For 945PL-A7G
Dual Channel Status DDR2_A1 DDR2_B1
Disabled O X
Disabled X O
Enabled O O
The DRAM bus width of the memory module must be the same (x8 or
x16)
11
Motherboard Manual
33 1
34 2
IDE1
40 39
2 1
12
945P-A7G/945PL-A7G
PEX16_1
PEX1_1
PEX1_2
PCI1
PCI2
PCI3
13
Motherboard Manual
PWR_LED
SLP On/Off
+ + -
9 16
1 8
+ -
SPK RST
HLED
14
945P-A7G/945PL-A7G
1 4
Pin Assignment
1 +12V
2 3 2 +12V
3 Ground
4 Ground
15
Motherboard Manual
JUSB3/JUSB4: Heade rs for USB 2.0 Ports at Front Panel
This motherboard prov ides 2 USB 2.0 headers, which allows user to connect
additional USB cable on the PC front panel, and also can be connected with
internal USB dev ices, like USB card reader.
Pin Assignment
1 +5V (fused)
2 +5V (fused)
3 USB-
4 USB-
5 USB+
6 USB+
7 Ground
JUSB3 JUSB4 8 Ground
2 10 9 Key
10 NC
1 9
Pin Assignment
1 Mic Left in
2 Ground
3 Mic Right in
1 2 4 GPIO
5 Right line in
6 Jack Sense
9 10 7 Front Sense
8 Key
9 Left line in
10 Jack Sense
Pin Assignment
4 1 1 Left Channel
Input
2 Ground
3 Ground
4 Right Channel
Input
16
945P-A7G/945PL-A7G
3 1
3 1
Pin 2-3 Close:
Clear CMOS data.
Pin Assignment
1 Case open signal
2 Ground
2 1
17
Motherboard Manual
Pin Assignment
1 Ground
7 4 1
2 T X+
SATA2 SATA4 3 T X-
4 Ground
5 RX-
6 RX+
7 Ground
Pin Assignment
1 +5V
2 SPDIF_OUT
3 Ground
1 3
18
945P-A7G/945PL-A7G
CHAPTER 4: USEFUL HELP
4.1 DRIVER INST ALLAT ION NOT E
After you installed your operating system, please insert the Fully Setup
Driver CD into your optical drive and install the driver for better system
performance.
You will see the following window after you insert the CD
The setup guide will auto detect your motherboard and operating system.
Note:
If this window didn’t show up after you ins ert the Driver CD, please use file brows er to
locate and execute the file SETUP.EXE under your optical drive.
A. Driver Installati on
To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.
B. Softwar e Installation
To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.
C. Manual
Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.
Note:
You will need Acrobat R eader to open the manual file. Pleas e download the latest version
of Acrobat Reader software from
http://www.adobe.com/products/acrobat/readstep 2.html
19
Motherboard Manual
4.2 AWARD BIOS BEEP CODE
Beep Sound Meaning
One long beep followed by two shortVideo card not found or v ideo card
beeps memory bad
High-low siren sound CPU overheated
System will shut down automatically
One Short beep when system boot-up No error found during POST
Long beeps every other second No DRAM detected or install
After confirmed, please follow steps below to relief the CPU protection
function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.
20
945P-A7G/945PL-A7G
4.4 TROUBLESHOOT ING
Probable Solution
1. No power to the system at all 1. Make sure power cable is
Power light don’t illuminate, f an securely plugged in.
inside power supply does not turn 2. Replace cable.
on. 3. Contact technical support.
2. Indicator light on key board does
not turn on.
System inoperativ e. Keyboard lights Using even pressure on both ends of
are on, power indicator lights are lit, the DIMM, press down firmly until the
and hard driv e is spinning. module snaps into place.
System does not boot from hard disk 1.Check cable running from disk to
driv e, can be booted f rom optical driv e. disk controller board. Make sure
both ends are securely plugged
in; check the driv e type in the
standard CMOS setup.
2. Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.
System only boots f rom optical driv e. 1. Back up data and applications
Hard disk can be read and applications f iles.
can be used but booting from hard disk 2. Ref ormat the hard driv e.
is impossible. Re-install applications and data
using backup disks.
Screen message says “Invalid Rev iew system’s equipment. Make sure
Conf iguration” or “CMOS Failure.” correct inf ormation is in setup.
Cannot boot system after installing 1. Set master/slave jumpers
second hard driv e. correctly.
2. Run SETUP program and select
correct driv e types. Call the drive
manuf acturers f or compatibility
with other drives.
21
Motherboard Manual
22
945P-A7G/945PL-A7G
2. When you see the following dialog in setup procedure, it means setup
is completed. Click “Finish” button.
Usage :
The following figures are only for reference, the screen printed in this
user manual will change according to your motherboard on hand.
23
Motherboard Manual
5.4 WARPSPEEDER™ III
1. Desktop Icon
After the [WarpSpeeder™ III] has been installed, a [WarpSpeeder™ III]
icon will appear on the desktop, just like the icon shown below.
2. Main Panel
If you double-click the desktop icon, [WarpSpeeder™ III] will be
launched. Please refer to the following figure; the utility’s first window
you will see is Main Panel.
24
945P-A7G/945PL-A7G
3. Overclock/Overvoltage Panel
Click the Overclock/Overvoltage button in the Main Panel, the button
will be highlighted and the Overclock/Overvoltage Panel will show
up as the following figure. As you can see, the Overclock Panel is
on the right side, and the Overvoltage Panel is on the left side.
25
Motherboard Manual
O ve rclock Panel contains these fe atures:
a. “Auto-Overclock”:
User can click this button and [WarpSpeeder™ III] will set the best
and stable performance and frequency automatically. A warning
dialog as below will show up to notify you that the system may
become unstable, click on “OK” to proceed.
26
945P-A7G/945PL-A7G
27
Motherboard Manual
5. About Panel
Click the “about” button in Main Panel, the button will be highlighted
and the About Panel will show up as the following figure.
In this panel, you can get model name and detail information in hints
of all the chipset that are related to overclocking. You can also get
the the version number of [WarpSpeeder™ III] utility.
Note :
Because the overclock, overvoltage, and hardware monitor features
are controlled by several separate chipset, [WarpSpeeder™ III]
divide these features to separate panels. If one chipset is not on
board, the correlative button in Main panel will be disabled, but will
not interfere other panels’ functions. This property can make
[WarpSpeeder™ III] utility more robust.
28
945P-A7G/945PL-A7G
29
Motherboard Manual
Celeron D Pr ozessoren mit bis zu 3,8 GHz Celeron D Pr ozessoren mit bis zu 3,8 GHz
CPU Unterstützt Hyper-Thre ading Unterstützt Hyper-Thre ading
Hardware-Überwachung Hardware-Überwachung
Super E/A
Lüfterdre hzahl-Co ntroller Lüfterdre hzahl-Co ntroller
"Smart Guar dian" -Funktion v on ITE "Smart Guar dian" -Funktion v on ITE
DDR2 DIMM-Steckplätze x 4 DDR2 DIMM-Steckplätze x 2
Jeder DIMM unterstützt 128/256/ 512MB & Jeder DIMM unterstützt 256/ 512MB & 1GB
30
945P-A7G/945PL-A7G
945P-A7G 945PL-A7G
PCI Expr ess x16 Steckplatz x1 PCI Expr ess x16 Steckplatz x1
Steckplätze PCI Expr ess x1 Steckplatz x2 PCI Expr ess x1 Steckplatz x2
PCI-Steckplatz x3 PCI-Steckplatz x3
System-Lüfter-Sockel x1 System-Lüfter-Sockel x1
"Gehä use o ffe n"-Sockel (optio nal) x1 "Gehä use o ffe n"-Sockel (optio nal) x1
PS/2-Tastatur x1 PS/2-Tastatur x1
PS/2-Maus x1 PS/2-Maus x1
Platinengr ö
205 mm (B) X 305 mm (L) 205 mm (B) X 305 mm (L)
ße.
Windows 2000 / XP / VISTA Windows 2000 / XP / VISTA
Biostar behält sich das Recht v or, ohne Biostar behält sich das Recht v or, ohne
OS-Unterst
Ankündigung die Unterstützung für ei n Ankündigung die Unterstützung für ei n
ützung
Betriebssystem hinzuzufügen oder zu Betriebssystem hinzuzufügen oder zu
entfernen. entfernen.
31
Motherboard Manual
FRANCE
945P-A7G 945PL-A7G
LGA 775 LGA 775
Processeurs Intel Core 2Duo / Pe ntium 4 / Processeurs Intel Core 2Duo / Pe ntium 4 /
Pentium D / Celeron D jusqu'à 3,8 GHz Pentium D / Celeron D jusqu'à 3,8 GHz
Prend en charge les technologies Prend en charge les technologies
UC
Hyper -Thre ading Hyper -Thre ading
d'exécution de bit de désactivation d'exécution de bit de désactivation
Intel Spee dStep® o ptimisée Intel Spee dStep® o ptimisée
Prend en charge la DDR 2 533 / 667 Prend en charge la DDR 2 400 / 533
Contrôl eur Seri al ATA i ntégré : Contrôl eur Seri al ATA i ntégré :
Taux de transfert jusqu'à 3.0 Go/s. Taux de transfert jusqu'à 3.0 Go/s.
SATA
Conforme à la spécification SATA Version Conforme à la spécification SATA Version
2.0 2.0
32
945P-A7G/945PL-A7G
945P-A7G 945PL-A7G
(optional) (optional)
Embase d'e ffacement CMOS x1 Embase d'e ffacement CMOS x1
Connecteur USB x2 Connecteur USB x2
Connecteur d'alimentatio n Connecteur d'alimentatio n
Dimension
s de la 205mm (l) X 305 mm ( H) 205mm (l) X 305 mm ( H)
carte
33
Motherboard Manual
IT ALIAN
945P-A7G 945PL-A7G
Processore Intel Core 2Duo / Pe ntium 4 / Processore Intel Core 2Duo / Pe ntium 4 /
Pentium D / Celeron D fino a 3.8 GHz Pentium D / Celeron D fino a 3.8 GHz
Ciascun DIMM supporta DDR2 256/ 512MB e Ciascun DIMM supporta DDR2 256/ 512MB e
principale Capacità massima della memori a 4GB Capacità massima della memori a 2GB
Modulo di memoria DDR a canale do ppio Modulo di memoria DDR a canale do ppio
Modalità Bus Master Ultra DMA 33 / 66 / Modalità Bus Master Ultra DMA 33 / 66 /
IDE
100 100
Controller Serial ATA inte grato Controller Serial ATA inte grato
Velocità di trasferimento dei dati fi no a 3.0 Velocità di trasferimento dei dati fi no a 3.0
SATA
Gb/s. Gb/s.
Compatibile specifiche SATA Versione 2.0. Compatibile specifiche SATA Versione 2.0.
Codec Uscita audio 5.1 ca nali (VER 6.X) Uscita audio 5.1 ca nali (VER 6.X)
audio Uscita audio 7.1 ca nali (VER 5.X) Uscita audio 7.1 ca nali (VER 5.X)
Supporto audio High- Defi nition (HD) Supporto audio High- Defi nition (HD)
34
945P-A7G/945PL-A7G
945P-A7G 945PL-A7G
Collettore apertur a telaio (optio nal) x1 Collettore apertur a telaio (optio nal) x1
Dimension
205 mm (larghezza) x 305 mm (altezza) 205 mm (larghezza) x 305 mm (altezza)
i scheda
35
Motherboard Manual
SPANISH
945P-A7G 945PL-A7G
Procesador I ntel Core 2Duo / Penti um 4 / Procesador I ntel Core 2Duo / Penti um 4 /
Pentium D / Celeron D hasta 3,8 GHz Pentium D / Celeron D hasta 3,8 GHz
CPU Admite Hyper -Threadi ng Admite Hyper -Threadi ng
Soporte los Mo dos PIO 0~4. Soporte los Mo dos PIO 0~4.
SATA Tasas de transfere ncia de hasta 3.0 Gb/s. Tasas de transfere ncia de hasta 3.0 Gb/s.
Compatible con la versión SATA 2.0. Compatible con la versión SATA 2.0.
sonido Salida de sonido de 7.1 canales (VER 5.X) Salida de sonido de 7.1 canales (VER 5.X)
Soporte de soni do de Alta Defi nición Soporte de soni do de Alta Defi nición
36
945P-A7G/945PL-A7G
945P-A7G 945PL-A7G
Cabecera de chasis abi erto(opcio nal) X1 Cabecera de chasis abi erto(opcio nal) X1
(4 patillas) (4 patillas)
Tamaño de
205 mm. (A) X 305 mm. (H) 205 mm. (A) X 305 mm. (H)
la placa
37
Motherboard Manual
PORT UGUESE
945P-A7G 945PL-A7G
LGA 775 LGA 775
Processador Intel Core2Duo / P entium 4 / Processador Intel Core2Duo / P entium 4 /
Pentium D / Celeron D até 3,8 GHz Pentium D / Celeron D até 3,8 GHz
CPU Suporta as tecnologias Hyper -Threa ding Suporta as tecnologias Hyper -Threa ding
Execute Disable Bit Execute Disable Bit
Cada mó dulo DIMM suporta uma memória Cada mó dulo DIMM suporta uma memória
Memória DDR2 de 256/ 512 MB & 1 GB DDR2 de 256/ 512 MB & 1 GB
Módulo de memória DDR de ca nal duplo Módulo de memória DDR de ca nal duplo
Suporta mó dulos DDR2 533 /667 Suporta mó dulos DDR2 400 / 533
Saída de á udio de 5.1 ca nais (VER 6.X) Saída de á udio de 5.1 ca nais (VER 6.X)
Codec de
Saída de á udio de 7.1 ca nais (VER 5.X) Saída de á udio de 7.1 ca nais (VER 5.X)
som
Suporta a especificação High-De finition Suporta a especificação High-De finition
Audio Audio
38
945P-A7G/945PL-A7G
945P-A7G 945PL-A7G
Conector do pai nel fro ntal x1 Conector do pai nel fro ntal x1
Conector de áudio fro ntal x1 Conector de áudio fro ntal x1
Tamanho
205 mm (L) X 305 mm (A) 205 mm (L) X 305 mm (A)
da pl aca
suportado ou remov er suporte para qualquer sistema ou remov er suporte para qualquer sistema
s operativo com ou sem aviso prévio. operativo com ou sem aviso prévio.
39
Motherboard Manual
POLISH
945P-A7G 945PL-A7G
LGA 775 LGA 775
Procesor Intel Cor e2Duo / Pe ntium 4 / Procesor Intel Cor e2Duo / Pe ntium 4 /
Pentium D / Celeron D do 3,8 GHz Pentium D / Celeron D do 3,8 GHz
kanału kanału
Obsługa DDR2 533 / 667 Obsługa DDR2 400 / 533
Funkcja ITE "Smart Guar dian" Funkcja ITE "Smart Guar dian"
Zintegrowany kontroler IDE Zintegrowany kontroler IDE
IDE Ultra DMA 33 / 66 / 100 Try b Bus Master Ultra DMA 33 / 66 / 100 Try b Bus Master
obsługa PIO tryb 0~4 obsługa PIO tryb 0~4
2.0. 2.0.
dupleksu dupleksu
40
945P-A7G/945PL-A7G
945P-A7G 945PL-A7G
Wymiary
205 mm (S) X 305 mm (W) 205 mm (S) X 305 mm (W)
płyty
Obsluga Windows 2000 / XP / VISTA Windows 2000 / XP / VISTA
systemu Biostar zastrzega sobie prawo do dawania Biostar zastrzega sobie prawo do dawania
41
Motherboard Manual
RUSSIAN
945P-A7G 945PL-A7G
LGA 775 LGA 775
CPU Процессор Intel Core 2Duo / Pentium 4 / Процессор Intel Core 2Duo / Pentium 4 /
(центра ль Pentium D / Celeron D до 3.8 ГГц Pentium D / Celeron D до 3.8 ГГц
ный Подде ржка техноло гий Hy per-Thre ading Подде ржка техноло гий Hy per-Thre ading
процессор Execute Disable Bit Execute Disable Bit
) Enha nced Intel SpeedStep® Enha nced Intel SpeedStep®
Extende d Memor y 64 Technology Extende d Memor y 64 Technology
FSB 533 / 800 / 1066 МГц 533 / 800 / 1066 МГц
Набор
Intel 945P Intel 945PL
микросхе
Intel ICH7 Intel ICH7
м
Слоты DDR2 DIMM x 4 Слоты DDR2 DIMM x 2
Каждый модуль DIMM по ддерж ивае т Каждый модуль DIMM по ддерж ивае т
128/256/ 512МБ & 1ГБ DDR2 128/256/ 512МБ & 1ГБ DDR2
Основная
Максимальная ёмк ость памя ти 4 ГБ Максимальная ёмк ость памя ти 2 ГБ
память
Модуль памя ти с дву хканальным Модуль памя ти с дву хканальным
режимом DDR режимом DDR
Подде ржка DDR2 533 / 667 Подде ржка DDR2 400 / 533
ITE 8712F ITE 8712F
Аппара тный монитор Аппара тный монитор
Super I/O Регуля тор скорости Регуля тор скорости
Функция ITE "Smart Guardian" Функция ITE "Smart Guardian"
(Интелле ктуа льна я защ ита) (Интелле ктуа льна я защ ита)
Встроенное устройств о у прав ления Встроенное устройств о у прав ления
встрое нными интерфе йсами устройств встрое нными интерфе йсами устройств
IDE Режим " хозяина" ш ины Ultra DMA 33 / 66 / Режим " хозяина" ш ины Ultra DMA 33 / 66 /
100 100
Подде ржка режима PIO 0~4, Подде ржка режима PIO 0~4,
Встроенное последов ате льное Встроенное последов ате льное
устройс тво управле ния ATA устройс тво управле ния ATA
скорость передач и данных до 3.0 скорость передач и данных до 3.0
SATA
гига бит/с. гига бит/с.
Соотве тств ие специф икации SATA версия Соотве тств ие специф икации SATA версия
2.0. 2.0.
Realtek 8110SC Realtek 8110SC
Автоматическое сог ласова ние Автоматическое сог ласова ние
Локаль на
10/ 100/1000 Мб/с 10/ 100/1000 Мб/с
я сеть
Частич ная / полная дуплексна я Частич ная / полная дуплексна я
способнос ть способнос ть
ALC861VD(VER 6.X) / ALC888(VER 5.X) ALC861VD(VER 6.X) / ALC888(VER 5.X)
Звуково й 5.1кана льный звуков ой выход (VER 6.X) 5.1кана льный звуков ой выход (VER 6.X)
кодек 7.1кана льный звуков ой выход (VER 5.X) 7.1кана льный звуков ой выход (VER 5.X)
Звукова я поддержка High-De finition Звукова я поддержка High-De finition
42
945P-A7G/945PL-A7G
945P-A7G 945PL-A7G
Слот PCI Ex press x16 x1 Слот PCI Ex press x16 x1
Слоты Слот PCI Ex press x1 x2 Слот PCI Ex press x1 x2
Слот PCI x3 Слот PCI x3
Разъём НГМД x1 Разъём НГМД x1
Разъём IDE x1 Разъём IDE x1
Разъём SATA x4 Разъём SATA x4
Разъём на лицево й пане ли x1 Разъём на лицево й пане ли x1
Входно й звук овой раз ъём x1 Входно й звук овой раз ъём x1
Разъём вв ода для CD x1 Разъём вв ода для CD x1
Разъём выво да для S/PDIF x1 Разъём выво да для S/PDIF x1
Контак тирующее приспосо бле ние Контак тирующее приспосо бле ние
вентиля тора центра льно го вентиля тора центра льно го
Встроенн
процессора x1 процессора x1
ый разъём
Контак тирующее приспосо бле ние Контак тирующее приспосо бле ние
вентиля тора системы x1 вентиля тора системы x1
Шасси о ткрыто го к онтактирую щего Шасси о ткрыто го к онтактирую щего
прис пособления ( дополнительно) x1 прис пособления ( дополнительно) x1
Открытое контак тирующее Открытое контак тирующее
прис пособление CMOS x1 прис пособление CMOS x1
USB-разъём x2 USB-разъём x2
Разъем питания ( 24 вывод) x1 Разъем питания ( 24 вывод) x1
Разъем питания ( 4 вывод) x1 Разъем питания ( 4 вывод) x1
Клавиа тура PS/ 2 x1 Клавиа тура PS/ 2 x1
Мышь PS/2 x1 Мышь PS/2 x1
Последо вате льный по рт x1 Последо вате льный по рт x1
Задняя
Порт подключ ения принтера x1 Порт подключ ения принтера x1
пане ль
Порт LAN x1 Порт LAN x1
средств
USB-порт x4 USB-порт x4
ввода-вы
Гнездо для по дключ ения Гнездо для по дключ ения
вода
наушников (Ver 6.x) x3 наушников (Ver 6.x) x3
Гнездо для по дключ ения Гнездо для по дключ ения
наушников (Ver 5.x) x6 наушников (Ver 5.x) x6
Размер
205 мм (Ш ) X 305 мм (В) 205 мм (Ш ) X 305 мм (В)
пане ли
Windows 2000 / XP / VISTA Windows 2000 / XP / VISTA
Biostar сохраня ет за собо й прав о Biostar сохраня ет за собо й прав о
Подде ржк
добав лять или уда лять средс тва добав лять или уда лять средс тва
а OS
обеспече ния для OS с или без обеспече ния для OS с или без
предварите льно го у ведом ления. предварите льно го у ведом ления.
43
Motherboard Manual
ARABIC
945PL-A7G 945P-A7G
ﺑ ﺘﺮدد ﻳﺼﻞ إﻟﻰ 3.8ﺝﻴﺠﺎ Pentium D / Celeron D ﺑ ﺘﺮدد ﻳﺼﻞ إﻟﻰ 3.8ﺝﻴﺠﺎ Pentium D / Celeron D
Hyper -Thr eadi ngﺕﺪﻋﻢ ﺕﻘﻨﻴﺎت Hyper -Thr eadi ngﺕﺪﻋﻢ ﺕﻘﻨﻴﺎت اﻟﻤﺮآﺰﻳ ﺔ
اﻟﻨﺎﻗﻞ اﻷﻡﺎﻡﻲ
ﻡﻴﺠﺎ هﺮﺕﺰ 533 / 800 / 1066ﺕﺮدد ﻡﻴﺠﺎ هﺮﺕﺰ 533 / 800 / 1066ﺕﺮدد
اﻟﺠﺎﻥﺒﻲ
ﻡﻴﺠﺎ ﺑﺎﻳﺖ و 1ﺝﻴﺠﺎ ﺑﺎﻳﺖ 256/512 ﻡﻴﺠ ﺎ ﺑﺎﻳﺖ و 1ﺝﻴﺠﺎ ﺑﺎﻳﺖ 256/512
اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ
ﺱﻌﺔ ذاآﺮة ﻗﺼﻮى 2ﺝﻴﺠﺎ ﺑﺎﻳﺖ ﺱﻌﺔ ذاآﺮة ﻗﺼﻮى 4ﺝﻴﺠﺎ ﺑﺎﻳﺖ
ﻡﻴﺠﺎ ﺑﺎﻳﺖ 400 / 533ﺱﻌﺎت DDRﺕﺪﻋﻢ اﻟﺬاآﺮة ﻡﻦ ﻥﻮع ﻡﻴﺠﺎ ﺑﺎﻳﺖ 533 / 667ﺱﻌﺎت DDRﺕﺪﻋﻢ اﻟﺬاآﺮة ﻡﻦ ﻥﻮع
ﻡﺘﻜﺎﻡﻞIDEﻡﺘﺤﻜﻢ ﻡﺘﻜﺎﻡﻞIDEﻡﺘﺤﻜﻢ
ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺑﺴﺮﻋﺎت ﺕﺼﻞ إﻟﻰ 3.0ﺝﻴﺠﺎﺑﺖ/ﺛﺎﻥﻴﺔ. ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺑﺴﺮﻋﺎت ﺕﺼﻞ إﻟﻰ 3.0ﺝﻴﺠﺎﺑﺖ /ﺛﺎﻥﻴﺔ. SATA
ﺕﻔﺎوض ﺕﻠﻘﺎﺋﻲ 1000 / 100/10ﻡﻴﺠﺎ ﺑﺎﻳﺖ /ﺛﺎﻥﻴﺔ ﺕﻔﺎوض ﺕﻠﻘﺎﺋﻲ 1000 / 100/10ﻡﻴﺠﺎ ﺑﺎﻳﺖ /ﺛﺎﻥﻴﺔ ﺵﺒﻜﺔ داﺧﻠﻴﺔ
44
945P-A7G/945PL-A7G
945PL-A7G 945P-A7G
) (VER 6.Xﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت5.1 ) (VER 6.Xﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت5.1
آﻮدﻳﻚ اﻟﺼﻮ ت
) (VER 5.Xﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت7.1 ) (VER 5.Xﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت7.1
ﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮﻳﻒ ﻡﻦ ﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮﻳﻒ ﻡﻦ
ﻋﺪد 1 ﻓﺘﺤﺔ PCI Expressx16 ﻋﺪد 1 ﻓﺘﺤﺔ PCI Expressx16
ﻋﺪد 2 ﻓﺘﺤﺔ PCI Expressx1 ﻋﺪد 2 ﻓﺘﺤﺔ PCI Expressx1 اﻟﻔﺘﺤﺎت
ﻋﺪد 1 ﻡﻨﻔﺬ ﻡﺤﺮك أﻗﺮاص ﻡﺮﻥﺔ ﻋﺪد 1 ﻡﻨﻔﺬ ﻡﺤﺮك أﻗﺮاص ﻡﺮﻥﺔ
ﻋﺪد 1 ﻡﻨﻔﺬIDE ﻋﺪد 1 ﻡﻨﻔﺬIDE
ﻋﺪد 4 ﻡﻨﻔﺬSATA ﻋﺪد 4 ﻡﻨﻔﺬSATA
ﻋﺪد 1 ﻡﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ ﻋﺪد 1 ﻡﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ
ﻋﺪد 1 ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ ﻋﺪد 1 ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ
ﻋﺪد 1 ﻡﻨﻔﺬCD-IN ﻋﺪد 1 ﻡﻨﻔﺬCD-IN
ﻋﺪد 1 ﻡﻨﻔﺬ ﺧﺮجS/PDIF ﻋﺪد 1 اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺱﻄﺢ ﻡﻨﻔﺬ ﺧﺮجS/PDIF
ﻋﺪد 1 وﺹﻠﺔ ﻡﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ ﻋﺪد 1 وﺹﻠﺔ ﻡﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ اﻟﻠﻮﺣ ﺔ
ﻋﺪد 1 وﺹﻠﺔ ﻡﺮوﺣﺔ اﻟﻨﻈﺎم ﻋﺪد 1 وﺹﻠﺔ ﻡﺮوﺣﺔ اﻟﻨﻈﺎم
ﻋﺪد 1 وﺹﻠﺔ ﻓﺘﺢ اﻟﻬﻴﻜﻞ) اﺧﺘﻴﺎري( ﻋﺪد 1 وﺹﻠﺔ ﻓﺘﺢ اﻟﻬﻴﻜﻞ) اﺧﺘﻴﺎري(
ﻋﺪد 1 وﺹﻠﺔ ﻡﺴﺢCMOS ﻋﺪد 1 وﺹﻠﺔ ﻡﺴﺢCMOS
ﻋﺪد 2 ﻡﻨﻔﺬUSB ﻋﺪد 2 ﻡﻨﻔﺬUSB
ﻋﺪد 1 ﻡﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )24دﺑﻮس( ﻋﺪد 1 ﻡﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )24دﺑﻮس(
ﻋﺪد 1 ﻡﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ) 4دﺑﺎﺑﻴﺲ( ﻋﺪد 1 ﻡﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ) 4دﺑﺎﺑﻴﺲ(
ﻋﺪد 1 ﻟﻮﺣﺔ ﻡﻔﺎﺕﻴﺢPS/2 ﻋﺪد 1 ﻟﻮﺣﺔ ﻡﻔﺎﺕﻴﺢPS/2
ﻋﺪد 1 ﻡﺎوس PS/2 ﻋﺪد 1 ﻡﺎوس PS/2
ﻋﺪد 1 ﻡﻨﻔﺬ ﺕﺴﻠﺴﻠﻲ ﻋﺪد 1 ﻡﻨﻔﺬ ﺕﺴﻠﺴﻠﻲ
ﻋﺪد 1 ﻡﻨﻔﺬ ﻃﺎﺑﻌﺔ ﻋﺪد 1 ﻡﻨﻔﺬ ﻃﺎﺑﻌﺔ ﻡﻨﺎﻓﺬ دﺧﻞ /ﺧﺮج
ﻋﺪد 1 ﻡﻨﻔﺬ ﺵﺒﻜﺔ اﺕﺼﺎل ﻡﺤﻠﻴﺔ ﻋﺪد 1 ﻡﻨﻔﺬ ﺵﺒﻜﺔ اﺕﺼﺎل ﻡﺤﻠﻴﺔ اﻟﻠﻮﺣﺔ اﻟ ﺨﻠﻔﻴﺔ
ﺑﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ﺕﺸﻐﻴﻞBiostarﺕﺤﺘﻔﻆ دﻋﻢ أﻥﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ ﺑﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ﺕﺸﻐﻴﻞBiostarﺕﺤﺘﻔﻆ
45
Motherboard Manual
JAPANESE
945P-A7G 945PL-A7G
各DIMMは 256/ 512MB & 1GB DDRをサポー 各DIMMは 256/ 512MB & 1GB DDRをサポー
ト ト
メインメモ
最大メモリ容量4GB 最大メモリ容量2GB
リ
デュアル チャンネルモードDDRメモリモジュ デュアル チャンネルモードDDRメモリモジュ
ール ール
DDR2 533 / 667 をサポート DDR2 400 / 533 をサポート
H/Wモニター H/Wモニター
Super I/O
ファン速度コントローラ/ モニター ファン速度コントローラ/ モニター
ITEの「スマートガーディアン」機能 ITEの「スマートガーディアン」機能
統合IDEコントローラ 統合IDEコントローラ
統合シリアルATAコントローラ 統合シリアルATAコントローラ
SATAバージョン2.0仕様に準拠。 SATAバージョン2.0仕様に準拠。
半/全二重機能 半/全二重機能
ハイデフィニションオーディオのサポート ハイデフィニションオーディオのサポート
46
945P-A7G/945PL-A7G
945P-A7G 945PL-A7G
PCIスロット x3 PCIスロット x3
フロッピーコネクタ x1 フロッピーコネクタ x1
IDEコネクタ x1 IDEコネクタ x1
SATAコネクタ x4 SATAコネクタ x4
フロントパネルコネクタ x1 フロントパネルコネクタ x1
フロントオーディオコネクタ x1 フロントオーディオコネクタ x1
CDインコネクタ x1 CDインコネクタ x1
システムファンヘッダ x1 システムファンヘッダ x1
シャーシオープンヘッダ(オプション) x1 シャーシオープンヘッダ(オプション) x1
CMOSクリアヘッダ x1 CMOSクリアヘッダ x1
USBコネクタ x2 USBコネクタ x2
電源コネクタ(24ピン) x1 電源コネクタ(24ピン) x1
電源コネクタ(4ピン) x1 電源コネクタ(4ピン) x1
PS/2キーボード x1 PS/2キーボード x1
PS/2マウス x1 PS/2マウス x1
シリアルポート x1 シリアルポート x1
背面パネル プリンタポート x1 プリンタポート x1
I/O LANポート x1 LANポート x1
USBポート x4 USBポート x4
オーディオジャック (Ver 6.x) x3 オーディオジャック (Ver 6.x) x3
ボードサイ
205 mm (幅) X 305 mm (高さ) 205 mm (幅) X 305 mm (高さ)
ズ
47
945P-A7G/945PL-A7G BIOS Manual
BIOS Setup..............................................................................1
8 PC Health Status.....................................................................................33
1
945P-A7G/945PL-A7G
BIOS Setup
Introduction
This manual discussed Phoenix-Award™ Setup program built into the ROM BIOS. The
Setup program allows users to modify the basic system configuration. This special
information is then stored in battery-backed RAM so that it retains the Setup information
when the power is turned off.
The Phoenix-Award BIOS™ installed in your computer system’s ROM (Read Only
Memory) is a custom version of an industry standard BIOS. This means that it supports
Intel Pentium ® 4 processor input/output system. The BIOS provides critical low-level
support for standard devices such as disk drives and serial and parallel ports.
Adding important has customized the Phoenix-Award BIOS™, but nonstandard, features
such as virus and password protection as well as special support for detailed fine-tuning of
the chipset controlling the entire system.
The rest of this manual is intended to guide you through the process of configuring your
system using Setup.
APM Support
These PHOENIX-AWARD BIOS supports Version 1.1&1.2 of the Advanced Power
Management (APM) specification. Power management features are implemented via the
System Management Interrupt (SMI). Sleep and Suspend power management modes are
supported. Power to the hard disk drives and video monitors can be managed by this
PHOENIX-AWARD BIOS.
ACPI Support
Phoenix-Award ACPI BIOS support Version 1.0b of Advanced Configuration and Power
interface specification (ACPI). It provides ASL code for power management and device
configuration capabilities as defined in the ACPI specification, developed by Microsoft,
Intel and Toshiba.
1
945P-A7G/945PL-A7G
PCI Bus Support
This PHOENIX-AWARD BIOS also supports Version 3.0 of the Intel PCI (Peripheral
Component Interconnect) local bus specification.
DRAM Support
DDR2 SDRAM (Double Data Rate Synchronous DRAM) are supported.
Supported CPUs
This PHOENIX-AWARD BIOS supports the Intel CPU.
Using Setup
In general, you use the arrow keys to highlight items, press <Enter> to select, use the
<PgUp> and <PgDn> keys to change entries, press <F1> for help and press <Esc> to quit.
The following table provides more detail about how to navigate in the Setup program by
using the keyboard.
Keystroke Function
Up arrow Move to previous item
Down arrow Move to next item
Left arrow Move to the item on the left (menu bar)
Right arrow Move to the item on the right (menu bar)
Move Enter Move to the item you desired
PgUp key Increase the numeric value or make changes
PgDn key Decrease the numeric value or make changes
+ Key Increase the numeric value or make changes
- Key Decrease the numeric value or make changes
Esc key Main Menu – Quit and not save changes into CMOS
Status Page Setup Menu and Option Page Setup Menu – Exit
Current page and return to Main Menu
F1 key General help on Setup navigation keys
F5 key Load previous values from CMOS
F7 key Load the optimized defaults
F10 key Save all the CMOS changes and exit
2
945P-A7G/945PL-A7G
1 Main Menu
Once you enter Phoenix-Award BIOS™ CMOS Setup Utility, the Main Menu will appear
on the screen. The Main Menu allows you to select from several setup functions. Use the
arrow keys to select among the items and press <Enter> to accept and enter the sub-menu.
!! WARNING !!
For better system performance, the BIOS firmware is being
continuously updated. The BIOS information described in this
manual (Figure 1, 2, 3, 4, 5, 6, 7, 8, 9) is for your reference only.
The actual BIOS information and settings on board may be slightly
different from this manual.
3
945P-A7G/945PL-A7G
Advanced Chipset Features
This submenu allows you to configure special chipset features.
Integrated Peripherals
This submenu allows you to configure certain IDE hard drive options and Programmed
Input/ Output features.
PnP/PCI Configurations
This submenu allows you to configure certain “Plug and Play” and PCI options.
PC Health Status
This submenu allows you to monitor the hardware of your system.
Frequency/ Voltage Control
This submenu allows you to change CPU Vcore Voltage and CPU/PCI clock. (However,
this function is strongly recommended not to use. Not properly change the voltage
and clock may cause the CPU or M/B damage!)
4
945P-A7G/945PL-A7G
Set User Password
If the Supervisor Password is not set, then the User Password will function in the same way
as the Supervisor Password. If the Supervisor Password is set and the User Password is
set, the “User” will only be able to view configurations but will not be able to change them.
Upgrade BIOS
This submenu allows you to upgrade bios.
5
945P-A7G/945PL-A7G
6
945P-A7G/945PL-A7G
7
945P-A7G/945PL-A7G
8
945P-A7G/945PL-A7G
CPU FEATURE
Thermal Management
Allow you to choose the thermal management method of your monitor.
The Choices: Thermal Monitor 1 (default), Thermal Monitor2.
Notes: The choices will be different according to your CPU features.
9
945P-A7G/945PL-A7G
C1E Function
CPU C1E Function select.
The Choices: Auto (default),Disabled
Virtualization Technology
When enabled, a VMM can utilize the additional hardware
Capabilities provided by vanderpool Technology.
The Choices: Enabled (default), Disabled
CACHE SETUP
CPU L3 Cache
Depending on the CPU/chipset in use, you may be able to increase memory access time
with this option.
Enabled (default) Enable cache.
Disabled Disable cache.
10
945P-A7G/945PL-A7G
BOOT SEQ & FLOPPY SETUP
These BIOS attempt to load the operating system from the device in the sequence
selected in these items.
The Choices: Pri. Master, Pri.Slave, Sec.Master, Sec. Slave, USBHDD0,
USBHDD1, USBHDD2 and Bootable Add-in Card.
11
945P-A7G/945PL-A7G
First/Second/Third Boot Device
These BIOS attempt to load the operating system from the device in the sequence
selected in these items.
The Choices: Floppy, LS120, Hard Disk, CDROM, ZIP100, USB-FDD, USB-ZIP,
USB-CDROM, LAN, Disabled.
VIRUS WARNING
This option allows you to choose the Virus Warning feature that is used to protect
the IDE Hard Disk boot sector. If this function is enabled and an attempt is made to
write to the boot sector, BIOS will display a warning message on the screen and sound an
alarm beep.
Disabled (default) Virus protection is disabled.
Enabled Virus protection is activated.
HYPER-THREADING TECHNOLOGY
This option allows you to enable or disabled CPU Hyper-Threading.
Enabled for Windows XP and Linux 2.4.x (OS optimized for Hyper Threading
Technology. Disabled for other OS (OS not optimized for Hyper Threading Technology.
The Choices: Enabled (default), Disabled.
12
945P-A7G/945PL-A7G
BOOT UP NUMLOCK STATUS
Selects the NumLock. State after power on.
On (default) Numpad is number keys.
Off Numpad is arrow keys.
SECURITY OPTION
This option will enable only individuals with passwords to bring the system online and/or
to use the CMOS Setup Utility.
System A password is required for the system to boot and
is also required to access the Setup Utility.
Setup (default) A password is required to access the Setup Utility only.
This will only apply if passwords are set from the Setup main menu.
APIC MODE
Selecting Enabled enables APIC device mode reporting from the BIOS to the operating
system.
The Choices: Enabled (default), Disabled.
13
945P-A7G/945PL-A7G
SMALL LOGO (EPA) SHOW
This item allows you to select whether the “Small Logo” shows.
Enabled (default) “Small Logo” shows when system boot up.
Disabled No “Small Logo” shows when system boots up.
14
945P-A7G/945PL-A7G
15
945P-A7G/945PL-A7G
DRAM RAS# PRECHARGE
If an insufficient number of cycles is allowed for RAS to accumulate its charge before
DRAM refresh, the refresh may be incomplete, and the DRAM may fail to retain data.
Fast gives faster performance; and Slow gives more stable performance. This field
applies only when synchronous DRAM is installed in the system.
The Choices: Auto (default), 2,3,4,5,6.
16
945P-A7G/945PL-A7G
PCI EXPRESS ROOT PORT FUNC
17
945P-A7G/945PL-A7G
5 Integrated Peripherals
Figure 5. Integrated Peripherals
18
945P-A7G/945PL-A7G
ONCHIP IDE DEVICE
19
945P-A7G/945PL-A7G
On-chip Secondary PCI IDE
This item allows you to enable or disable the primary/ secondary IDE Channel.
The Choices: Enabled (default), Disabled.
SATA Mode
This item allows you to choose SATA Mode.
The Choices: IDE (default),RAID,AHCI.
20
945P-A7G/945PL-A7G
ON BOARD DEVICE
USB Controller
Select Enabled if your system contains a Universal Serial Bus (USB) controller and
you have USB peripherals.
The Choices: Enabled (default), Disabled
21
945P-A7G/945PL-A7G
Onboard RAID <ITE8211>
This item allows you to enable or disable to support Onboard RAID (ITE8211).
The Choices: Enabled (default), Disabled.
Onboard 1394
This item allows you to enable or disable to support Onboard 1394 contrller.
The Choices: Enabled (default), Disabled.
Onboard LAN
This item allows you to enable or disable the Onboard LAN.
The Choices: Enabled (default), Disabled.
22
945P-A7G/945PL-A7G
SUPER IO DEVICE
If you highlight the literal “Press Enter” next to the “Super IO Device” label and then press
the enter key, it will take you a submenu with the following options:
23
945P-A7G/945PL-A7G
ECP Mode Use DMA
Select a DMA Channel for the port.
The Choices: 3 (default), 1.
24
945P-A7G/945PL-A7G
25
945P-A7G/945PL-A7G
ACPI & WAKE UP EVENTS
ACPI Function
This item displays the status of the Advanced Configuration and Power Management
(ACPI).
The Choices: Enabled (default), Disabled.
26
945P-A7G/945PL-A7G
Wake-Up by PCI card
When you select “Enable”, a PME signal from PCI card returns the system to Full On
state.
The Choices: Enabled, Disabled (default).
Power On by Ring
An input signal on the serial Ring Indicator (RI) line (in other words, an
incoming call on the modem) awakens the system from a soft off state.
The Choices: Enabled, Disabled (default).
Resume by Alarm
This function is for setting date and time for your computer to boot up.
During Disabled, you cannot use this function. During Enabled,
Choose the Date and Time.
The Choices: Enabled, Disabled (default).
POWER ON Function
This item allows you to choose the power on function.
The Choices: Button Only (default), Password, Hot Key, Mouse Move/Click,
Mouse Double Click, Any Key, Keyboard 98.
KB POWER ON Password
Input password and press Enter to set the Keyboard power on password.
27
945P-A7G/945PL-A7G
RELOAD TIMER EVENTS
28
945P-A7G/945PL-A7G
POWER MANAGEMENT
This category allows you to select the type (or degree) of power saving and is directly
related to the following modes:
1. HDD Power Down.
2. Suspend Mode.
There are four options of Power Management, three of which have fixed mode settings
Min Saving (default)
Minimum power management.
Suspend Mode = 1 hr.
HDD Power Down = 15 min
Max Saving
Maximum power management only available for sl CPU’s.
Suspend Mode = 1 min.
HDD Power Down = 1 min.
User Define
Allow you to set each mode individually.
When not disabled, each of the ranges is from 1 min. to 1 hr. except for HDD
Power Down which ranges from 1 min. to 15 min. and disable.
Blank Screen
This option only writes blanks to the video buffer.
DPMS(default)
Initial display power management signaling.
SUSPEND TYPE
Select the Suspend Type.
The Choices: Stop Grant (default), PwrOn Suspend.
29
945P-A7G/945PL-A7G
MODEM USE IRQ
This determines the IRQ, which can be applied in MODEM use.
The Choices: 3 (default), 4 / 5 / 7 / 9 / 10 / 11 / NA.
SUSPEND MODE
The item allows you to select the suspend type under ACPI operating system.
The Choices: Disabled, 1 Min, 2 Min, 4 Min, 6 Min, 8 Min, 10 Min, 20 Min, 30 Min, 40
Min, 1 Hour (default).
SOFT-OFF BY PWR-BTN
Pressing the power button for more than 4 seconds forces the system to enter the
Soft-Off state when the system has “hung.”
The Choices: Delay 4 Sec, Instant-Off (default).
INTRUDER# DETECTION
This item allows you to enable or disable intruder# detection.
The Choices: Disabled (default), Enabled.
30
945P-A7G/945PL-A7G
7 PnP/PCI Configurations
This section describes configuring the PCI bus system. PCI, or Personal Computer
Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed of
the CPU itself uses when communicating with its own special components. This section
covers some very technical items and it is strongly recommended that only experienced
users should make any changes to the default settings.
Figure 7. PnP/PCI Configurations
RESOURCES CONTROLLED BY
By Choosing “Auto (ESCD)” (default), the system BIOS will detect the system
resources and automatically assign the relative IRQ and DMA channel for each
peripheral. By Choosing “Manual”, the user will need to assign IRQ & DMA for add-on
cards. Be sure that there are no IRQ/DMA and I/O port conflicts.
The Choices: Auto (default),Manual.
31
945P-A7G/945PL-A7G
IRQ RESOURCES
This submenu will allow you to assign each system interrupt a type, depending on the
type of device using the interrupt. When you press the “Press Enter” tag, you will be
directed to a submenu that will allow you to configure the system interrupts. This is only
configurable when “Resources Controlled By” is set to “Manual”.
IRQ-3 assigned to PCI Device
IRQ-4 assigned to PCI Device
IRQ-5 assigned to PCI Device
IRQ-7 assigned to PCI Device
IRQ-9 assigned to PCI Device
IRQ-10 assigned to PCI Device
IRQ-11 assigned to PCI Device
IRQ-12 assigned to PCI Device
IRQ-14 assigned to PCI Device
IRQ-15 assigned to PCI Device
32
945P-A7G/945PL-A7G
8 PC Health Status
Figure 8. PC Health Status
33
945P-A7G/945PL-A7G
Slope PWM
Increasing the value of slope PWM will raise the speed of CPU fan.
The Choices: 1 PWM Value/℃(default), 2 PWM Value/℃, 4 PWM Value/℃, 8 PWM
Value/℃,16 PWM Value/℃.
SHUTDOWN TEMPERATURE
This item allows you to set up the CPU shutdown Temperature. This item only effective
under Windows 98 ACPI mode
The Choices: 65OC/140OF, 70OC/149OF, 75OC/158OF, Disabled (default).
34
945P-A7G/945PL-A7G
9 Frequency/Voltage Control
Figure 9. Frequency Control
CPU Voltage
This item allows you to select CPU Voltage Control.
The Choices: StartUp (default), +0.012V~+0.787V.
Memory Voltage
The Choices:1.90V (default), 2.00V, 2.10V, 2.20V, 2.30V, 2.40V, 2.50V, 2.60V..
NB/SB Voltage
The Choices: 1.5V (default), 1.6V, 1.7V, 1.8V.
35
945P-A7G/945PL-A7G
CPU CLOCK
This item allows you to select CPU Clock, and CPU over clocking.
Min= 100, Max= 265,Key in a DEC number.
The Choices: 100MHZ (default).
Special Notice:
If unfortunately, the system’s frequency that you are selected is not functioning, there are
two methods of booting-up the system.
Method 1:
Clear the COMS data by setting the JCOMS1 ((2-3) closed)) as “ON” status. All the
CMOS data will be loaded as defaults setting.
Method 2:
Press the <Insert> key and Power button simultaneously, after that keep-on pressing the
<Insert> key until the power-on screen showed. This action will boot-up the system
according to FSB of the processor.
PCIE Clock
This item will activated only when “PCIE Clock Select” is set to “Manual”
The Choices: Min= 100, Max= 200, Key in a DEC number.
PCI Clock
The Choices: 33.33Mhz(default), 33.80Mhz, 34.29Mhz, 34.78Mhz, 35.29Mhz,
35.82Mhz, 36.36Mhz, 36.92Mhz, 37.50Mhz.
It’s strongly recommended to set CPU Vcore and clock in default setting. If the CPU
Vcore and clock are not in default setting, it may cause CPU or M/B damage.
36