You are on page 1of 16

http://shop.bsigroup.

com/constructionstandards Design
Structures
Construction products
Built environment engineering
Infrastructure
Site operations
Facilities management

2010
An essential guide to construction
Construction and the Built Environment and building publications

raising standards worldwide ™


BSI Construction standards
BSI brings a new and refreshed approach to the area of standardization. The emphasis
of standards has been extended beyond technical issues to include process issues of key
strategic importance to the construction sector. The policy remit has been widened to
include standards relating to all aspects of the built environment.
To compliment the change in policy focus, the construction standards committees at BSI
are also being reorganized into seven core areas, namely:
• Design • Structures • Construction products
• Built environment engineering • Infrastructure • Site operations
• Facilities management
This new portfolio addresses requirements for the whole of the built environment.
BSI has already mapped out an action plan for the future and has reorganized the
technical committees to mirror the way the industry actually works. This will lead to
a new generation of performance related standards which will improve innovation
and competitiveness in the UK and overseas.
The standards and the changes needed to reflect the new demands for
smart, sustainable construction for the future.

Contents

Design Page 3 Infrastructure Page 11

Structures Page 5 Site operations Page 12

Construction products Page 6 Facilities management Page 13

Built environment engineering Page 9

Standards and publications may also be ordered via the BSI shop at http://shop.bsigroup.com *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of
2 To order please call BSI Customer Services on the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is
required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and
+44 (0)20 8996 9001 or visit http://shop.bsigroup.com Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
Design
The standards for this key market are used by architects, design engineers, developers and facilities
management contractors.

BS 6100 Building and civil engineering vocabulary


New parts of BS 6100
With the growth in the number of international construction projects and the development of the international market in construction products, there is an increasing need
for agreement on a common language in the domain. Thus the following parts of this important standard have been revised to take into account both technical developments
and changes in commonly used terms.

Title ISBN Price Member Price

BS 6100-2:2007 Building and civil engineering. Vocabulary. Spaces, 978 0 580 50573 7 £124* £62
building types, environment and physical planning
BS 6100-3:2007 Building and civil engineering. Vocabulary. Civil engineering. General 978 0 580 53723 3 £172* £86
BS 6100-4:2008 BS 6100-4:2008 Building and civil engineering. Vocabulary. Transport 978 0 580 53724 0 £172* £86
BS 6100-5:2009 Building and civil engineering. Vocabulary. Civil engineering. 978 0 580 53725 7 £170* £85
Water engineering, environmental engineering and pipe lines
BS 6100-6:2008 Building and civil engineering. Vocabulary. Construction parts 978 0 580 53726 4 £196* £98
BS 6100-7:2008 Building and civil engineering. Vocabulary. Services 978 0 580 53727 1 £172* £86
BS 6100-8:2007 Building and civil engineering. Vocabulary. 978 0 580 50719 9 £124* £62
Work with timber and wood-based panels
BS 6100-9:2007 Building and civil engineering. Vocabulary. Work with concrete and plaster 978 0 580 53728 8 £172* £86
BS 6100-10:2007 Building and civil engineering. Vocabulary. Contract terms 978 0 580 50602 4 £86* £43
BS 6100-11:2007 Building and civil engineering. Vocabulary. 978 0 580 50891 2 £124* £62
Performance characteristics, measurement and joints
BS 6100-12:2008 Building and civil engineering. Vocabulary. Plant, equipment and persons 978 0 580 53730 1 £142* £71

BS 8300:2009 Design of buildings and their approaches to BS 9999:2008 Code of practice for fire safety in the
meet the needs of disabled people – Code of practice design, management and use of buildings
BS 8300 gives recommendations for the design of buildings and BS 9999 gives recommendations and guidance on the design,
their approaches to meet the needs of disabled people (including, management and use of buildings to achieve acceptable levels
where appropriate, disabled children). It applies to car parking of fire safety for all people in and around buildings.
provision, setting-down points and garaging, access routes to BS 9999 is applicable to the design of new buildings, and to
and around all buildings, and entrances to and interiors of new alterations, extensions and changes of use of an existing building,
buildings. The recommendations also apply to routes to facilities with the exception of individual homes and with limited applicability
associated with and in the immediate vicinity of buildings. in the case of certain specialist buildings. It also provides guidance
on the ongoing management of fire safety in a building throughout
POPULAR STANDARD the entire life cycle of the building, including guidance for designers
• A4 Loose-leaf/PDF • 232 pages • ISBN 0 580 57419 1 to ensure that the overall design of a building assists and enhances
Price £240*, Member Price £120 the management of fire safety. It can be used as a tool for assessing
existing buildings, although fundamental change in line with the
guidelines might well be limited or not practicable.

BESTSELLER
• A4 loose-leaf/PDF • 458 pages • ISBN 978 0 580 57920 2
FREE DOWNLOAD Price £290*, Member Price £145

Fire brochure
Download the latest Fire brochure at

http://shop.bsigroup.com/firestandards

*P&P £5.95 UK (inclusive of VAT); £9.95 Rest of the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer.
FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, http://shop.bsigroup.com/constructionstandards 3
DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change.
For details of BSI Membership, call +44 (0)20 8996 9001.
Design
BS ISO 15686-5:2008 Buildings and constructed assets. PD 156865:2008 Standardized method of life cycle
Service life planning. Life cycle costing costing for construction procurement. A supplement
This is the first international standard for property life cycle to BS ISO 15686-5. Buildings and constructed assets.
costing. It has been developed by industry and in consultation Service life planning. Life cycle costing
with 17 countries. It has a major impact on all future construction Standardized Method of Life Cycle Costing for Construction
procurement - particularly major investment and Private Finance Procurement brings together BS ISO 15686-5 and the BCIS
Initiative (PFI) and Public-Private partnership (PPP) projects. It also Standard Form of Capital Cost Analysis (SFCA) along with
impacts the design of new buildings through clients’ desire to set industry recognized occupancy cost codes
the right budgets and optimize their life cycle costs, from a whole
life value and sustainable development perspective. PUBLISHED DOCUMENT
POPULAR STANDARD • A4 paperback • 87 pages
• A4 Loose-leaf/PDF • 52 pages • ISBN 978 0 580 54083 7 • ISBN 978 0 580 62662 3
Price £172*, Member Price £86 Price £50

Title ISBN Price Member Price

BS ISO 15686-1:2000 Buildings and constructed assets. Service life planning. General principles 978 0 580 36496 8 £172* £86
BS ISO 15686-2:2001 Buildings and constructed assets. Service life planning. 978 0 580 37335 5 £142* £71
Service life prediction procedures
BS ISO 15686-3:2002 Buildings and constructed assets. Service life planning. 978 0 580 40324 6 £162* £81
Performance audits and reviews
BS ISO 15686-6:2004 Buildings and constructed assets. Service life planning. 978 0 580 44476 7 £86* £43
Procedures for considering environmental impacts
BS ISO 15686-7:2006 Buildings and constructed assets. Service life planning. 978 0 580 48028 3 £142* £71
Performance evaluation for feedback of service life data from practice
BS ISO 15686-8:2008 Buildings and constructed assets. Service-life planning. 978 0 580 53688 5 £162* £81
Reference service life and service-life estimation

BS 1192:2007 Collaborative production of architectural, BS 8103-3:2009 Structural design of low-rise buildings.


engineering and, construction information. Code of practice for timber floors and roofs for housing
Code of practice BS 8103-3 gives recommendations for the sizes of timber
This standard establishes the methodology for managing the elements, fixings, and their connections with masonry walls,
production, distribution and quality of construction information, floors and roofs.
including that generated by CAD systems, using a disciplined process BS 8103-3 applies to:
for collaboration and a specified naming policy. The standard is • Detached houses
applicable to all parties involved in the preparation and use of such • Semi-detached houses
information throughout the design, construction, operation and • Terraced houses
deconstruction of projects and throughout the supply chain. • Flats (with not more than four self-contained dwelling units
per floor, accessible from one staircase)
POPULAR STANDARD • Single-storey non-residential buildings e.g. domestic garages
and annexes, not exceeding 36 m2 in floor area
• A4 Loose-leaf/PDF • 41 pages • ISBN 978 0 580 58556 2
Price £142*, Member Price £71 NEW STANDARD
• A4 Loose-leaf/PDF • 212 pages • ISBN 0 580 55897 9
Price £248*, Member Price £124
BS 6031:2009 Code of practice for earthworks
BS 6031 gives recommendations and guidance for unreinforced
earthworks forming part of general civil engineering construction, BS 8493:2008+Amendment 1:2010 Light reflectance value
with the exception of dams. It also gives recommendations and
guidance for temporary excavations such as trenches and pits.
(LRV) of a surface. Method of test
BS 6031 reflects the actual processes that might be followed on BS 8493 specifies the method of test to determine the Light
a typical project to deliver the earthworks. In practice earthworks Reflectance Value (LRV) of different surfaces of materials.
design is an iterative process where the employer, consultant, LRV is the proportion of visible light reflected by a surface
main contractor, sub-contractors and construction validation compared to the sensitivity to light of the human eye.
team often take design decisions. To reflect this situation
BS 6031 includes some subjects in more than one clause. AMENDED STANDARD
• A4 Loose-leaf/PDF • 22 pages
NEW STANDARD • ISBN 0 580 67695 6
• A4 Loose-leaf/PDF • 128 pages • ISBN 0 580 53841 4 Price £183*, Member Price £86
Price £206*, Member Price £103

Standards and publications may also be ordered via the BSI shop at http://shop.bsigroup.com *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of
4 To order please call BSI Customer Services on the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is
required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and
+44 (0)20 8996 9001 or visit http://shop.bsigroup.com Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
Structures
This section covers standards for the design and execution of buildings and civil engineering works.
Written for structural engineers, the standards and publications in this area cover design principles
and set out mathematical formulae and calculation methods.
Buildings (above four stories) and other structures such as bridges, chimneys, towers, masts, and
pipelines are covered. So too are requirements for the design of foundations, embankments, and piles.
Individual construction materials and the impacts of loadings are also covered.

BS EN 1090-2:2008 Execution of steel structures and BS 5268-3:2006 Structural use of timber. Code of practice
aluminium structures. Technical requirements for the for trussed rafter roofs
execution of steel structures BS 5268-3 covers the design, fabrication and use of trussed
BS EN 1090-2 specifies requirements for execution of steel rafters for roofs. This standard provides recommendations on the
structures, in order to ensure adequate levels of mechanical strength grades of timber used in the fabrication of rafters and
resistance and stability, serviceability and durability. This standard other critical design issues. Guidance on the handling, storage
specifies requirements for execution of steel structures in and installation of fabricated rafters is given. Information to be
particular those that are designed according to all parts of exchanged between the trussed rafter designer and the building
BS EN 1993 and the steel parts of composite steel and concrete designer is also listed.
structures designed according to all parts of BS EN 1994.
POPULAR STANDARD
POPULAR STANDARD • A4 Loose-leaf/PDF • 74 pages • ISBN 0 580 47340 6
• A4 Loose-leaf/PDF • 208 Pages • ISBN 978 0 580 55315 8 Price £186*, Member Price £93
Price £234*, Member Price £117

Construction Products
Construction products covers an industry of £40 billion annually and 40% of total construction output.
The main users of standards are manufacturers, inspectors and testers, but other parts of the
construction process also use the standards.
Many of the standards are harmonized product standards or supporting methods of test for the
Construction Products Directive 1989. The work programme is now nearly concluded but second
generation of standards will address dangerous substances.

BS 8500-1:2006 Concrete. Complementary British


Standard to BS EN 206-1. Method of specifying and BS 8902:2009 Responsible sourcing sector certification
guidance for the specifier schemes for construction products. Specification
BS 8500-1 is intended for use by specifiers of concrete. As the importance of green procurement strategies in the
BS 8500-1 gives five approaches to the specification of concrete, building and construction sectors grows, government is
with the standard describing the correct way of compiling requiring suppliers and contractors to improve their
specifications for designated, designed, prescribed, standardized sustainability performance. Responsible sourcing schemes
prescribed, and proprietary concretes. are a major part of this activity. Responsible sourcing is the
management of sustainable development in the provision
BS 8500-1 also gives detailed guidance for the specifier, including or procurement of a product.
advice on exposure classes, aggregate classes, intended working
life, temperature, etc., presented as a series of tables with BS 8902 provides a framework for the development of sector
accompanying explanatory text. certification schemes for responsible sourcing of construction products. It gives
requirements for the management, development, content and operation of
POPULAR STANDARD sector certification schemes for responsible sourcing and supply of construction
products.
• A4 Loose-leaf/PDF • 66 pages • ISBN 0 580 48251 0
Price £172*, Member Price £86 NEW STANDARD
• A4 Loose-leaf/PDF • 18 pages • ISBN 0 580 64889 2
Price £84*, Member Price £42

*P&P £5.95 UK (inclusive of VAT); £9.95 Rest of the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer.
FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, http://shop.bsigroup.com/constructionstandards 5
DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change.
For details of BSI Membership, call +44 (0)20 8996 9001.
Construction Products
BS 8500-2:2006 Concrete. Complementary British The Construction Products Directive (CPD) A Guide to the
Standard to BS EN 206-1. Specification for constituent Requirements & CE Marking
materials and concrete The Construction Products Directive (CPD) is one of the ‘New
BS 8500-2 is intended for use by producers of concrete. Approach’ Directives that aim to create a single European market
This part of BS 8500 specifies a number of basic requirements by removing the technical barriers to trade between Member
for concrete and its constituent materials, and gives specific States through the use of harmonized standards and approvals.
requirements relating to the types of concrete listed in Recently revised and regularly updated, this publication explains
BS 8500-1. It also specifies requirements relating to the implications of the Construction Products Directive and gives
delivery, conformity testing, production control and transport. guidance on compliance. It includes:

• Copy of the CPD


POPULAR STANDARD • Explanation of the essential requirements
• New values and classification systems
• A4 Loose-leaf/PDF • 46 pages • ISBN 0 580 48252 9 • The CE marking process, step-by-step
Price £142*, Member Price £71 • CE marking requirements
• List of:
- Notified bodies
- Current harmonized standards
BS EN 12620:2002+Amendment 1:2008 Aggregates for - Supporting standards
concrete - European technical approvals.
BS EN 12620 specifies the properties of aggregates and filler
aggregates obtained by processing natural, manufactured or
POPULAR SUBSCRIPTION PRODUCT
recycled materials and mixtures of these aggregates for use in • Loose-leaf with binder • ISBN 0 580 33091 5 • BSI order ref TH 42097
concrete. It covers aggregates having an oven dried particle density Price £189* includes free updating service in the first year
greater than 2,00 Mg/m3 (2 000 kg/m3) for all concrete, including
concrete in conformity with BS EN 206-1 and concrete used in
roads and other pavements and for use in precast concrete
products. BS EN 12620 also covers recycled aggregate with BS 8214:2008 Code of practice for fire door assemblies
densities between 1,50 Mg/m3 (1 500 kg/m3) and 2,00 Mg/m3
TBS 8214 gives recommendations for the specification,
(2 000 kg/m3) with appropriate caveats and recycled fine
installation and maintenance of fire doors. The recommendations
aggregate (4 mm) with appropriate caveats.
are applicable only to hinged or pivoted pedestrian doorsets, door
NEW STANDARD assemblies, or door leaves of any material, fitted into frames of
any material.
• A4 Loose-leaf/PDF • 60 pages • ISBN 978 0 580 63327 0
Price £172*, Member Price £86

NEW STANDARD
BS EN 206-1:2000 Concrete. Specification, performance, • Loose-leaf with binder • 30 pages • ISBN 0 580 53032 6
production and conformity Price £124*, Member Price £62
This standard applies to concrete for structures cast in situ,
precast structures, and structural precast products for buildings
and civil engineering structures. BS 644:2009 Timber windows. Fully finished factory-
The concrete may be mixed on site, ready-mixed concrete or assembled windows of various types. Specification
produced in a plant for precast concrete products.
BS 644 specifies requirements for the design, construction and
This standard specifies requirements for: performance of fully finished and glazed factory-assembled timber
• The constituent materials of concrete windows of various types.
• The properties of fresh and hardened concrete and their verification
• The limitations for concrete composition It applies to windows that have been treated with either opaque,
• The specification of concrete non-opaque finishes, or that are designed to support an externally
• The delivery of fresh concrete fixed covering of another material, and that have been factory-
• The production control procedures glazed. It does not apply to windows supplied as kits for site
• The conformity criteria and evaluation of conformity assembly.
This standard applies to normal-weight, heavy-weight and light-weight concrete. NEW STANDARD
POPULAR STANDARD • A4 Loose-leaf/PDF • 28 pages • ISBN 0 580 56200 6
• A4 Loose-leaf/PDF • 74 pages • ISBN 0 580 36882 3 Price £120*, Member Price £60
Price £186*, Member Price £93

Standards and publications may also be ordered via the BSI shop at http://shop.bsigroup.com *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of
6 To order please call BSI Customer Services on the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is
required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and
+44 (0)20 8996 9001 or visit http://shop.bsigroup.com Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
Construction Products
BS 7533-3:2005+Amendment 1:2009 Pavements BS 8204-1:2003+Amendment 1:2009 Screeds, bases and in
constructed with clay, natural stone or concrete pavers. situ floorings. Concrete bases and cementitious levelling
Code of practice for laying precast concrete paving screeds to receive floorings. Code of practice
blocks and clay pavers for flexible pavements BS 8204-1 gives recommendations for the design and laying
BS 7533-3 has been revised to incorporate the latest practices of concrete bases and cementitious levelling screeds to receive
involved in the laying of pavements. It also includes guidance in situ floorings. It also gives recommendations for constituent
on the laying of permeable pavements. Guidance on the materials, design, work on site, inspection and testing of concrete
reinstatement of pavements has been moved to BS 7533-11. bases that are to receive in situ wearing screeds.
BS 7533-3 gives recommendations for the laying of conventional AMENDED STANDARD
and permeable pavements using precast concrete paving blocks
conforming to BS EN 1338 and clay pavers conforming to • A4 Loose-leaf/PDF • 46 pages
BS EN 1344. • ISBN 0 580 65352 0
Price £158*, Member Price £79
AMENDED STANDARD
• A4 Loose-leaf/PDF • 30 pages • ISBN 0 580 68068 7
Price £124*, Member Price £62
BS 8204-2:2003+Amendment 1:2009 Screeds, bases and
in situ floorings. Concrete wearing surfaces. Code of
practice
BS 7533-13:2009 Pavements constructed with clay, natural
BS 8204-2 gives recommendations for constituent materials,
stone or concrete pavers. Guide for the design of design, work on site, inspection and testing of in situ concrete
permeable pavements constructed with concrete paving direct finished base slabs. It applies to concrete as the wearing
blocks and flags, natural stone slabs and setts and clay surface and wearing screeds (formerly known as high strength
pavers concrete toppings and granolithic toppings). It applies to both
ground-supported floors and suspended floors.
BS 7533-13 gives guidance on the design of permeable
pavements surfaced with:
• Concrete paving blocks manufactured in accordance AMENDED STANDARD
with BS EN 1338
• A4 Loose-leaf/PDF • 40 pages • ISBN 0 580 65353 7
• Concrete paving flags manufactured in accordance
with BS EN 1339 Price £142*, Member Price £71
• Natural stone slabs manufactured in accordance
with BS EN 1341
• Natural stone setts manufactured in accordance
with BS EN 1342 BS 8204-3:2004+Amendment 1:2009 Screeds, bases and in
• Clay pavers manufactured in accordance with BS EN 1344. situ floorings. Polymer modified cementitious levelling
BS 7533-13 applies to all pavements subjected to the usual road spectrum of axle screeds and wearing screeds. Code of practice
loads up to 8 000 kg, including both highway pavements and light industrial BS 8204-3 gives recommendations for the design and installation
pavements where the traffic is similar in character to highway vehicles. of trowel finished polymer modified cementitious levelling screeds
and wearing screeds. It applies where the proportion of polymer
NEW STANDARD solids based on the mass of dry cement is at least 4 %, as
• A4 Loose-leaf/PDF • 34 pages • ISBN 0 580 58077 2 bonded screeds applied to direct finished concrete slabs, fine
Price £138*, Member Price £69 concrete screeds and to existing concrete floors within buildings.

AMENDED STANDARD
PD 6689:2009. Surface treatments. Guidance on the use of • A4 Loose-leaf/PDF • 30 pages • ISBN 0 580 65354 4
BS EN 12271 and BS EN 12273 Price £124*, Member Price £62
Published Document (PD) 6689 gives guidance on the use
of BS EN 12271 and BS EN 12273 in the United Kingdom.
BS EN 12271 specifies the properties of surface dressing whilst
BS EN 12273 specifies the properties of slurry surfacing and
BSI MEMBERSHIP
microsurfacing.
Standards are recognized as a powerful business tool and can define
PD 6689 gives guidance on the performance requirements and
control procedures for the installation of both surface treatments
crucial aspects of a company's safety, quality and reliability. They also
as products for the maintenance of roads and other trafficked areas. enable businesses to operate in a global market.
Become a BSI member to get 50% off British Standards
PUBLISHED DOCUMENT
• A4 Loose-leaf/PDF • 24 pages • ISBN 0 580 65636
Visit www.bsimembers.com
Price £120*, Member Price £60

*P&P £5.95 UK (inclusive of VAT); £9.95 Rest of the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer.
FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, http://shop.bsigroup.com/constructionstandards 7
DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change.
For details of BSI Membership, call +44 (0)20 8996 9001.
Construction Products
BS 5395-1:2010 Stairs. Code of practice for the design of PD 6682-2:2009 Aggregates. Aggregates for bituminous
stairs with straight flights and winders mixtures and surface treatments for roads, airfields and
In the UK, there are over 500 deaths each year from stair related other trafficked areas. Guidance on the use of BS EN 13043
accidents in the home. It is estimated that a further 250 000 Published Document (PD) 6682-2 gives guidance on how to use
non-fatal accidents take place on stairs in the home each year. BS EN 13043.
It is therefore important that stairs are designed and constructed
BS EN 13043 covers requirements for aggregates for bituminous
to enable use by people with as wide range of ability as practical.
mixtures and surface treatments for roads, airfields and other
It is therefore important that stairs are designed and constructed trafficked areas.
to enable use by people with as wide range of ability as practical.
BS EN 13043 specifies a range of categories for properties to help
NEW STANDARD you select appropriate limiting values for the wide range of
aggregates in bituminous mixtures and surface treatments within
• A4 Loose-leaf/PDF • 42 pages • ISBN 0 580 55896 2 Europe. In most instances, provision is also made to identify a
Price £142*, Member Price £71 declared value for properties when the value is outside indicated
categories.

PUBLISHED DOCUMENT
PD 6682-1:2009 Aggregates. Aggregates for concrete. • A4 Loose-leaf/PDF • 30 pages • ISBN 0 580 66959 0
Guidance on the use of BS EN 12620 Price £120*, Member Price £60
Published Document (PD) 6682 gives recommendations and
guidance on how to use BS EN 12620:2002+ Amendment1:2008
in the UK.
PD 6682-6:2009 Aggregates. Aggregates for unbound and
BS EN 12620 specifies the properties of aggregates and filler
aggregates obtained by processing natural, manufactured or hydraulically bound materials for use in civil engineering
recycled materials. It also covers mixtures of these aggregates for works and road construction. Guidance on the use of
use in concrete. This is a useful standard for the construction of BS EN 13242
roads and pavements.
Published Document (PD) 6682-6 gives recommendations and
PUBLISHED DOCUMENT guidance on how to use BS EN 13242:2002+Amendment1:2007
in the UK.
• A4 Loose-leaf/PDF • 34 pages • ISBN 0 580 65306 3
BS EN 13242 specifies the properties of aggregates obtained
Price £138*, Member Price £69
by processing natural, manufactured or recycled materials for
hydraulically bound and unbound materials. The standard applies
to civil engineering work and road construction.
BS EN 13242 specifies a range of categories for properties to help you select appropriate
limiting values for the wide range of aggregates used in unbound and hydraulically
bound materials produced in Europe. In most instances, provision is also made to identify
a declared value for properties when the value is outside indicated categories.

PUBLISHED DOCUMENT
• A4 Loose-leaf/PDF • 34 pages • ISBN 0 580 65330 8
Price £138*, Member Price £69

Standards for testing concrete

Title ISBN Price Member Price

BS EN 12350-1:2009 Testing fresh concrete. Sampling 0 580 58788 7 £68* £34


BS EN 12350-2:2009 Testing fresh concrete. Slump-test 0 580 58789 4 £68* £34
BS EN 12350-3:2009 Testing fresh concrete. Vebe test 0 580 58790 0 £68* £34
BS EN 12350-4:2009 Testing fresh concrete. Degree of compactability 0 580 58791 7 £68* £34
BS EN 12350-5:2009 Testing fresh concrete. Flow table test 0 580 58792 4 £68* £34
BS EN 12350-6:2009 Testing fresh concrete. Density 0 580 58793 1 £68* £34
BS EN 12350-7:2009 Testing fresh concrete. Air content. Pressure methods 0 580 58794 8 £120* £60
BS EN 12390-2:2009 Testing hardened concrete. Making and curing specimens for strength tests 0 580 58796 2 £68* £34
BS EN 12390-3:2009 Testing hardened concrete. Compressive strength of test specimens 0 580 58797 9 £84* £42
BS EN 12390-5:2009 Testing hardened concrete. Flexural strength of test specimens 0 580 58798 6 £68* £34
BS EN 12390-7:2009 Testing hardened concrete. Density of hardened concrete 0 580 58799 3 £68* £34
BS EN 12390-8:2009 Testing hardened concrete. Depth of penetration of water under pressure 0 580 58800 6 £68* £34
BS EN 12504-1:2009 Testing concrete in structures. Cored specimens. 0 580 58801 3 £68* £34
Taking, examining and testing in compression

Standards and publications may also be ordered via the BSI shop at http://shop.bsigroup.com *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of
8 To order please call BSI Customer Services on the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is
required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and
+44 (0)20 8996 9001 or visit http://shop.bsigroup.com Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
Built Environment Engineering
This area is involved with standards used in the construction sector for: heating, ventilation,
air conditioning, installation of gas appliances and electrical installations.
BS 5440-1:2008 Flueing and ventilation for gas appliances BS 5871-4:2007 Specification for the installation and
of rated input not exceeding 70 kW net (1st, 2nd and 3rd maintenance of gas fires, convector heaters, fire/back
family gases). Specification for installation of gas boilers and decorative fuel effect gas appliances.
appliances to chimneys and for maintenance of chimneys Independent gas-fired flueless fires, convector heaters
BS 5440-1 specifies requirements for the installation of gas and heating stoves of nominal heat input not exceeding
appliances to chimneys, chimney installation work likely to be 6 kW (2nd and 3rd family gases)
undertaken by gas engineers working under UK gas industry This part of BS 5871 specifies installation and maintenance
conditions and requirements for the maintenance of chimneys. requirements for independent gas-fired flueless fires, convector
This revision has been undertaken for the following reasons. heaters and heating stoves of nominal heat input not exceeding
a) To align with European Standards, including how chimneys 6 kW burning 2nd and 3rd family gases for the purpose of heating
are treated and defined. rooms or internal spaces in domestic or commercial premises.
b) To recognize and refer to recent changes in building legislation.
c) To cover recent developments in appliance design, flue material POPULAR STANDARD
and practical experience in the disposal of products of • A4 Loose-leaf/PDF • 38 pages
combustion by means of flues.
• ISBN 978 0 580 53949 7
d) To improve advice on flueing and ventilation installation
practices and reduce occurrences of CO related incidents Price £142*, Member Price £71
attributable to flueing and ventilation for gas appliances.

REVISED STANDARD BS 6798:2009 Specification for installation and


• A4 Loose-leaf/PDF • ISBN 978 0 580 57065 0 maintenance of gas-fired boilers of rated input not
Price £212*, Member Price £106 exceeding 70 kW net
BS 6798 specifies requirements for the selection, installation,
inspection, commissioning and maintenance of gas‑fired boilers
BS 5422:2009 Method for specifying thermal insulating for central heating and other purposes, which have a total rated
materials for pipes, tanks, vessels, ductwork and heat input not exceeding 70 kW, based on net calorific value.
equipment operating within the temperature range This includes cookers with integral boilers used to provide
-40°C to +700°C central heating.

Since thermal insulation of pipework and equipment represents NEW STANDARD


one of the most cost‑effective ways available of limiting carbon • A4 Loose-leaf/PDF • 46 pages
dioxide emissions, BS 5422-- highlights a series of thicknesses
within its core tables, which have been calculated in accordance • ISBN 978 0 580 59048 1
with environmental principles. BS 5422 describes a method for Price £158*, Member Price £79
specifying requirements for thermal insulating materials on pipes,
tanks, vessels, ductwork and equipment for certain defined
applications and conditions within the temperature range -40 °C
to +700 °C. It also specifies some physical requirements for the insulating materials.
Hot and Cold Water Supply. 3rd edition Robert H Garrett
It is intended for use by designers, specifiers, contractors and manufacturers of (co-published with Wiley-Blackwell)
thermal insulation. "...probably the most significant book on the subject of plumbing
published this decade... easy to read and understand with many
NEW STANDARD clear illustrations."
• A4 Loose-leaf/PDF • 88 pages • ISBN 978 0 580 56661 5 Teaching & Plumbing ( National Association of Plumbing Teachers)
Price £180*, Member Price £90 This book, considered the ‘Plumber’s Bible’, provides a highly
illustrated guide for designers, installers and contractors working
on hot and cold water supplies. The book takes account of the
BS 5546:2000 Specification for installation of hot water 1999 Water Regulations and British Standard BS 6700. The new
edition takes account of the latest requirements of the Building
supplies for domestic purposes, using gas-fired Regulations and features a new section on sprinkler systems.
appliances of rated input not exceeding 70 kW
This British Standard specifies requirements for the selection,
BESTSELLER
installation, inspection and commissioning of gas-fired water- • Paperback • 412 pages • Published by BSI
heating appliances of rated net input not exceeding 70 kW, which • ISBN 978 0 580 56661 5 • BSI order ref BIP 2177
supply hot water for domestic purposes. It applies to appliances
Price £39.99*
which use 1st, 2nd or 3rd family gases.
This British Standard does not apply to hot water supply systems
in multiple dwellings supplied from a central source.

POPULAR STANDARD
• A4 Loose-leaf/PDF • 50 pages • ISBN 0 580 33228 4
Price £142*, Member Price £71

*P&P £5.95 UK (inclusive of VAT); £9.95 Rest of the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer.
FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, http://shop.bsigroup.com/constructionstandards 9
DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change.
For details of BSI Membership, call +44 (0)20 8996 9001.
Built Environment Engineering
BS 6644:2005+A1:2008 Specification for installation of Electrician’s Guide to the Building Regulations
gas-fired hot water boilers of rated inputs of between This publication includes Approved Document P:
70kW (net) and 1.8 MW (net) (2nd and 3rd family gases) Electrical Safety in Dwellings
BS 6644 is a key standard on installation of gas-fired hot water The law requires you to meet the requirements of the Building
boilers. It specifies requirements for the installation, including Regulations. This new guide has been written so that electricians
design, inspection and commissioning, of gas-fired hot water can meet the requirements not only of Part P: Fixed Installations
boilers of net rated heat inputs exceeding 70 kW. Groups of in Dwellings, but also other relevant Building Regulations.
boilers with individual net heat inputs of 70 kW or less, but It is written to meet the needs of those studying for the Level 2
with total net heat inputs in excess of 70 kW are also covered Domestic Installers award. The Guide includes simple standardised
by this standard. circuits, with full colour pictures and a comprehensive index.
NEWLY AMENDED POPULAR GUIDE
• A4 Loose-leaf/PDF • 52 pages • ISBN 978 0 580 64905 9 • A4 paperback • 210 pages • ISBN 0 86341 463 X
Price £172*, Member Price £86 • BSI order ref BIP 2082
Price £20*

BS 7671:2008 Requirements for electrical installations.


IEE Wiring Regulations. Seventeenth edition BS 6644:2005+Amendment 1:2008 Specification for
BS 7671 applies to the design, erection and verification of installation of gas-fired hot water boilers of rated inputs
electrical installations, also additions and alterations to existing of between 70kW (net) and 1.8 MW (net) (2nd and 3rd
installations. Existing installations that have been installed in
accordance with earlier editions of the Regulations may not family gases)
comply with this edition in every respect. This does not necessarily BS 6644 is a key standard on installation of gas-fired hot water
mean that they are unsafe for continued use or require upgrading. boilers. It specifies requirements for the installation, including
BS 7671 applies to all commercial, domestic and industrial wiring design, inspection and commissioning, of gas-fired hot water
installations. These must be designed, constructed, inspected, boilers of net rated heat inputs exceeding 70 kW. Groups of
tested and certificated to meet the requirements of BS 7671. boilers with individual net heat inputs of 70 kW or less, but
BS 7671 includes changes necessary to maintain technical with total net heat inputs in excess of 70 kW are also covered
alignment with CENELEC harmonization documents. by this standard.

BESTSELLER AMENDED STANDARD


• A4 Loose-leaf/PDF • 317 pages • ISBN 978 0 86341 844 0 • A4 paperback • 52 pages • ISBN 0 580 64905 9
Price £75*, Member Price £75 Price £172*, Member Price £86

Electrical Plugs and Wiring and World Supplies BS 6798:2009 Specification for installation and maintenance
2nd edition of gas-fired boilers of rated input not exceeding 70 kW net
This indispensable guide and reference source for electrical BS 6798 specifies requirements for the selection, installation,
plugs, wiring and electricity supplies worldwide, provides inspection, commissioning and maintenance of gas fired boilers
individual country information on electrical plugs, wiring for central heating and other purposes, which have a total rated
and electricity supplies for over 110 countries spanning Europe, heat input not exceeding 70 kW, based on net calorific value.
the Americas, the Middle East, Africa, Asia and the Pacific Rim. This includes cookers with integral boilers used to provide central
heating.
An invaluable resource for any manufacturer, exporter or supplier
of electrical goods and services, this international survey comes
in two main parts. NEW STANDARD
The first part deals with plugs and wiring that would be used with mains-powered • A4 paperback • 46 pages • ISBN 0 580 59048 1
household and similar equipment, operating up to 250V a.c. single phase, with
a maximum current rating of 20A. For most countries, individual country surveys Price £158*, Member Price £79
contain information on plugs, mains cables, sockets for lamps and building wiring
codes, as well as diagrams and dimensions of plugs and sockets. The second part
provides useful comparative tables of world electricity supplies, voltages and BS 6173:2009 Specification for installation and maintenance
frequencies. All domestic, commercial and industrial supplies are included, with
some distribution voltages. Supplementary notes provide additional information. of gas-fired catering appliances for use in all types of
For a full list of countries covered please visit www.bsigroup.com/plugs catering establishments (2nd and 3rd family gases)
POPULAR BOOK BS 6173 is a key standard for all gas installers. BS 6173 specifies
requirements for the installation, servicing and maintenance of
• A4 paperback • 271 pages • ISBN 0 580 50495 2 new and previously-used gas-fired catering appliances used in
• BSI order ref BIP 2074 catering establishments, burning 2nd or 3rd family gases. The
Price £170* main changes to the standard include updates to installation
practice and legislation.

NEW STANDARD
• A4 paperback • 30 pages • ISBN 0 580 61900 7
Price £120*, Member Price £60

Standards and publications may also be ordered via the BSI shop at http://shop.bsigroup.com *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of
10 To order please call BSI Customer Services on the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is
required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and
+44 (0)20 8996 9001 or visit http://shop.bsigroup.com Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
Infrastructure
Infrastructure meets society’s needs for travel, energy, water and public services.

BS 6465-1:2006+Amendment1:2009 Sanitary installations. BS 6700:2006+Amendment 1:2009 Design, installation,


Code of practice for the design of sanitary facilities and testing and maintenance of services supplying water for
scales of provision of sanitary and associated appliances domestic use within buildings and their curtilages.
This part of BS 6465 gives recommendations on the design of Specification
sanitary facilities and the recommended scale of provision of This British Standard specifies requirements for and gives
sanitary and associated appliances in new buildings and buildings recommendations on the design, installation, alteration, testing
undergoing major refurbishment. and maintenance of services supplying water for domestic use
within buildings and their curtilages. It covers the system of
pipes, fittings and connected appliances installed to supply
any building with water for drinking, culinary, domestic laundry,
ablutionary, cleaning and sanitary purposes.
• A4 Loose-leaf/PDF • 36 pages • ISBN 0 580 67116 6
Price £162*, Member Price £81 POPULAR STANDARD
• A4 Loose-leaf/PDF • 146 pages • ISBN 0 580 64283 8
Price £218*, Member Price £109
BS 6465-2:1996 Sanitary installations. Code of practice for
space requirements for sanitary appliances
BS 8490:2007 Guide to siphonic roof drainage systems
This Part of BS 6465 gives recommendations for the spaces to
be provided for the location, installation, use and maintenance This British Standard applies to roof drainage systems using
of sanitary appliances within dwellings, places of work or public circular-section pipes that operate under siphonic action.
amenities. These recommendations do not cover the needs of It gives information and provides guidance on design parameters,
all disabled people. installation, verification and maintenance needs of siphonic roof
drainage systems.

• A4 Loose-leaf/PDF • 38 pages • ISBN 0 580 25456 9 POPULAR STANDARD


Price £142*, Member Price £71 • A4 Loose-leaf/PDF • 36 pages • Published by BSI
• ISBN 978 0 580 50206 4
Price £142*, Member Price £71
BS 6465-3:2006 Sanitary installations. Code of practice for
the selection, installation and maintenance of sanitary
and associated appliances BS 9124:2008 Specification for steel and aluminium
This part of BS 6465 gives recommendations on the selection, access cover systems with over 1 m clear opening
installation and maintenance of the most commonly used sanitary
BS 9124 specifies requirements for access cover systems
and associated appliances to be provided in new and refurbished
manufactured from steel or aluminium and with a clear
buildings.
opening greater than 1 m for installations within areas
subject to pedestrian and/or slow moving vehicular traffic,
for use as covers over chambers and ducts.
BS 9124 provide as basis for consistent quality, user safety,
customer satisfaction and manufacturer discipline, in a highly
• A4 Loose-leaf/PDF • 46 pages • ISBN 0 580 49199 4 fragmented market. BS 9124 establishes definitions, materials,
Price £162*, Member Price £81 design, structural performance, technical documentation,
installation and operating guidance notes, warning notes,
testing requirements, verification and marking of such access
cover systems.
BS 6297:2007+Amendment 1:2008 Code of practice for
the design and installation of drainage fields for use POPULAR STANDARD
in wastewater treatment • A4 Loose-leaf/PDF • 30 pages • ISBN 0 580 57176 3
BS 6297 gives recommendations and guidance on the design Price £124*, Member Price £62
and installation of drainage fields and infiltration systems for use
in wastewater treatment. It is applicable to systems for handling
discharges from domestic and commercial sources from single
households and upwards. These sources are typically septic tanks
and package treatment plants.

• A4 Loose-leaf/PDF • 44 pages • ISBN 0 580 64038 4


Price £142*, Member Price £71

*P&P £5.95 UK (inclusive of VAT); £9.95 Rest of the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer.
FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, http://shop.bsigroup.com/constructionstandards 11
DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change.
For details of BSI Membership, call +44 (0)20 8996 9001.
Infrastructure
BS 8515:2009 Rainwater harvesting systems. Code of BS 8102:2009 Code of practice for protection of below
practice ground structures against water from the ground
BS 8515 gives guidance on the design, installation, testing and BS 8102 gives recommendations and provides guidance on
maintenance of rainwater harvesting systems supplying non- methods of dealing with and preventing the entry of water
potable water in the UK. Non-potable water is water that can be from surrounding ground into a structure below ground level.
used for other things excluding human consumption. This includes It covers the use of:
laundry, WC flushing and garden watering. It does not cover a) Waterproofing barrier materials applied to the structure
systems supplying water for drinking, food preparation and b) Structurally integral watertight construction
cooking, dishwashing and personal hygiene. c) Drained cavity construction.

NEW STANDARD NEW STANDARD


• A4 Loose-leaf/PDF • 48 pages • ISBN 978 0 580 60490 4 • A4 Loose-leaf/PDF • 46 pages • ISBN 0 580 59399 4
Price £158*, Member Price £79 Price £158*, Member Price £79

PAS 1188 Flood protection products

Title ISBN Price Member Price

PAS 1188-1 Flood protection products. Specification. Part 1: Building aperture products 0 580 62700 2 £85* £42.50
PAS 1188-2 Flood protection products. Specification. Part 2: Temporary products 0 580 62701 9 £85* £42.50
PAS 1188-3 Flood protection products. Specification. Part 3: Building skirt systems 0 580 62702 6 £85* £42.50
PAS 1188-4 Flood protection products. Specification. Part 4: Demountable products 0 580 62703 3 £85* £42.50

Site Operations
This section is for contractors – many of which are SMEs – and covers mobile machinery and temporary
equipment, noise control of machinery and of operations, environmental pollution, operator competency
site and public safety.
BS 7212:2006 Code of practice for the safe use of BS 5228-2:2009 Code of practice for noise and vibration
construction hoists control on construction and open sites. Vibration
This British Standard gives recommendations and guidance on BS 5228-2 gives recommendations for basic methods of vibration
the installation, maintenance, examination and operation of control relating to construction and open sites where work
construction hoists, including hoistway protection, and on the activities/operations generate significant vibration levels, including
management of these activities. It includes recommendations and industry-specific guidance. The legislative background to vibration
guidance on erection, alteration and dismantling of hoists. It also control is described and recommendations are given regarding
sets out the responsibilities of the various parties involved in all procedures for the establishment of effective liaison between
these activities. The standard is applicable to temporarily installed developers, site operators and local authorities.Guidance is
powered construction hoists. provided concerning methods of measuring vibration and
assessing its effects on the environment.
POPULAR STANDARD
• A4 Loose-leaf/PDF • 72 pages • ISBN 0 580 48249 9 NEW STANDARD
Price £186*, Member Price £93 • A4 Loose-leaf/PDF • 96 pages • ISBN 978 0 580 56049 1
Price £180*, Member Price £90

BS 5228-1:2009 Code of practice for noise and vibration


control on construction and open sites. Noise
SIGN UP TO FREE E-NEWSLETTERS
BS 5228-1 gives recommendations for basic methods of noise
control relating to construction and open sites where work
activities/operations generate significant noise levels, including To keep up to date with the latest developments in fire standards, sign
industry-specific guidance. The legislative background to noise up to receive our sector-specific newsletters at
control is described and recommendations are given regarding
procedures for the establishment of effective liaison between http://shop.bsigroup.com/newsletters
developers, site operators and local authorities.

NEW STANDARD
• A4 Loose-leaf/PDF • 69 pages • ISBN 978 0 580 56048 4
Price £228*, Member Price £114

Standards and publications may also be ordered via the BSI shop at http://shop.bsigroup.com *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of
12 To order please call BSI Customer Services on the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is
required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and
+44 (0)20 8996 9001 or visit http://shop.bsigroup.com Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
Site Operations
BS 5975:2008 Code of practice for temporary works BS 7121-4:2010 Code of practice for safe use of cranes.
procedures and the permissible stress design of falsework Lorry loaders
BS 5975 gives recommendations and guidance on the procedures BS 7121-4 gives recommendations for the safe use of lorry
for all aspects of temporary works in the construction industry. It loaders. A lorry loader is a commercial vehicle or trailer, fitted
includes guidance on design, specification, construction, use and with a loader crane, which normally has a load-carrying capability.
dismantling of falsework. This standard also gives guidance on BS 7121-4 should be used in conjunction with BS 7121-2,
permissible stress design of falsework. which provides general guidance on the inspection, testing
Falsework is any temporary structure used to support a permanent and examination of all types of cranes.
structure while it is not self-supporting e.g. scaffolding.

POPULAR STANDARD NEW STANDARD


• A4 Loose-leaf/PDF • 214 pages • ISBN 0 580 66644 5 • A4 Loose-leaf/PDF • 102 pages • ISBN 0 580 53622 9
Price £248*, Member Price £124 Price £196*, Member Price £98

DD 8483:2008 Cranes. Condition monitoring. Specification BS 7121-13:2009 Code of practice for safe use of cranes.
for data logging equipment Hydraulic gantry lifting systems
Data logging on cranes started with offshore cranes in the 1980s, BS 7121-13 gives recommendations for the safe use of hydraulic
following a serious accident in the North Sea involving the failure gantry lifting systems (HGLS). Subjects covered include safe
of a crane slew ring well within its predicted life. This incident systems of work, management, planning, selection, erection and
focused attention on the potential for serious overloading with dismantling, inspection, testing, examination, training, operation
offshore cranes. and maintenance.
DD 8483 specifies general requirements for data logging devices BS 7121-13 should be used with BS 7121-2, which provides
which, when fitted to cranes, monitor specified parameters to general guidance on the inspection, testing and examination
provide information on crane use. of all types of cranes.

DRAFT DOCUMENT NEW STANDARD


• A4 Loose-leaf/PDF • 32 pages • ISBN 0 580 53609 0 • A4 Loose-leaf/PDF • 70 pages • ISBN 580 68410 4
Price £72*, Member Price £36 Price £168*, Member Price £84

Facilities Management
Facilities managers have responsibilities for providing, maintaining and developing many services.
These range from property strategy, space management and communications infrastructure to
building maintenance, administration and contract management.
Facilities management includes space, infrastructure, people and organization.

BS 25999-1:2006 Code of practice for business continuity BS 25999-2:2007 Business continuity management.
management Specification
BS 25999-1 establishes the process, principles and terminology BS 25999-2 specifies requirements for setting up and managing
of business continuity management (BCM). It provides a basis for an effective Business Continuity Management System (BCMS) in
understanding, developing and implementing business continuity the following areas:
within an organization and provides confidence in business-to- • Planning
business and business-to-customer dealings. • Implementing
• Monitoring
BS 25999-1 has been developed by practitioners throughout the
• Maintaining and improving
global community, drawing upon their considerable academic,
technical and practical experiences of BCM. It has been produced The requirements specified in BS 25999-2 are generic and can be
to provide a system based on good practice for BCM. applied to all organizations regardless of type, size and nature of
business.
BESTSELLER BS 25999-2 can be used by internal and external parties, including certification bodies,
• A4 Loose-leaf/PDF • 50 pages • ISBN 978 0 580 49601 5 to assess an organization’s ability to meet its own business continuity needs, as well
as any customer, legal or regulatory needs.
Price £100*, Member Price £50
BESTSELLER
• A4 loose-leaf/PDF • 28 pages • ISBN 978 0 580 59913 2
Price £100*, Member Price £50

*P&P £5.95 UK (inclusive of VAT); £9.95 Rest of the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer.
FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, http://shop.bsigroup.com/constructionstandards 13
DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change.
For details of BSI Membership, call +44 (0)20 8996 9001.
Facilities Management
BS EN 12464-2:2007 Lighting of work places. Outdoor
work places
BS EN 12464-2 is a new European standard that focuses on the
recommendations for outdoor work places that are used at night.
FREE DOWNLOAD BS EN 12464-2 includes important recommendations on how
Risk brochure obtrusive light can be limited, to keep our night sky free of
light pollution.

Download the latest Business Continuity POPULAR STANDARD


Management and Risk brochure at • A4 Loose-leaf/PDF • 30 pages
• ISBN 978 0 580 58500 5
http://shop.bsigroup.com/riskstandards Price £124*, Member Price £62

A Guide to Emergency Lighting C J Watts


Protection against lightning: UK guide to the practical This popular guide aids users and design, installation and
application of BS EN 62305:2006 maintenance engineers in providing appropriate emergency
This new book is a comprehensive companion guide to the new lighting systems to assist occupants to leave premises safely
British standard BS EN 62305:2006, which aims to promote a and comply with this new legislation. It covers all aspects of
consistent approach to the standard's usage in the field by the selection, design, installation, maintenance and testing of
offering practical interpretations of its formal approach. battery powered emergency lighting systems to meet legislation.

BESTSELLER
• ISBN 978 0 580 50899 8 • BSI order ref BIP 2118
POPULAR GUIDE
• A5 Paperback • 216 pages, 2006 • Published by BSI
Price £75*, Member Price £50
• ISBN 0 580 47755 X • BSI order ref BIP 2081
Price £45*, Member Price £45
BS 5266-1:2005 Emergency lighting. Code of practice for
the emergency lighting of premises Emergency lighting CD-ROM
BS 5266-1:2005 gives recommendations and guidance on the This CD-ROM contains a compilation of standards and
factors that need to be considered in the design of, and the explanatory guides to give you an invaluable tool when
installation and wiring of, the electrical emergency lighting designing, building and installing emergency lighting.
systems specified in BS EN 50172/BS 5266-8 in order to provide It includes BS 5266-1, BS 5266-7 (BS EN 1838), BS 5266-8
the lighting parameters specified in BS EN 1838/BS 5266-7. (BS EN 50172), BS EN 60598-2-22, BS EN 50171 and BIP 2081
(A Guide to Emergency Lighting).
POPULAR STANDARD
These are complemented by a series of slides written by CJ
• A4 Loose-leaf/PDF • 36 pages
Watts (the author of the Guide to Emergency Lighting) and
• ISBN 0 580 46820 8 the ICEL (Industry Committee for Emergency Lighting) which
Price £142*, Member Price £71 will assist with the application of the standards.

POPULAR CD-ROM
• CD-ROM • 2006 • Published by BSI
BS 5266-10:2008 Guide to the design and provision of • BSI order ref BIP 3071
emergency lighting to reduce the risks from hazards in Price £295* + VAT, Member Price £195
the event of failure of the normal lighting supply
BS 5266-10 provides specific guidance on:
• Hazards that can arise in a building as a result of the type or PAS 79:2007 Fire Risk Assessment. Guidance and a
number of occupants, the design of the premises and activities Recommended Methodology C S Todd & Associates Ltd
carried out within it
• The actions occupants have a responsibility to perform in the PAS 79 has been revised to take account of changes to the
event of a normal lighting supply failure. Regulatory Reform (Fire Safety) Order.
BS 5266-10: This comprehensive publication gives a nine-step structured
• Gives recommendations on the factors that need to be considered approach and corresponding documentation for conducting and
in the design and provision of emergency lighting systems recording significant findings of fire risk assessments in buildings
across three legislative regimes, namely that in England and Wales,
• Helps reduce risk in the event of a failure of the normal
that in Scotland and the unchanged legislation in Northern Ireland.
lighting supply
• Offers advice on appropriate emergency lighting levels,
initiation times and working planes.
For a full list of contents visit http://shop.bsigroup.com/PAS79
NEW STANDARD BESTSELLER
• A4 loose-leaf/PDF • 26 pages • ISBN 978 0 580 58881 5 • A4 Paperback/PDF • 95 pages • Published by BSI
Price £124*, Member Price £62 • ISBN 978 0 580 59398 7 • BSI order ref PAS 79
Price £99*

Standards and publications may also be ordered via the BSI shop at http://shop.bsigroup.com *P&P £5.95 UK (inclusive of VAT); £9.95 Rest of
14 To order please call BSI Customer Services on the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is
required by non-Members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and
+44 (0)20 8996 9001 or visit http://shop.bsigroup.com Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0)20 8996 9001.
British Standards Online (BSOL) Conferences

Our conferences bring together key players to debate


latest trends, regulations and issues, with opportunities
for delegates to take part in open discussions and
British Standards Online (BSOL) is BSI’s flagship database of debates led by panels of expert speakers. These
standards. Used by professionals around the world, it is the conferences are often accompanied by relevant
most comprehensive and authoritative source of British, workshops which go into detail on particular topics
and adopted European and international, standards. in a practical learning environment.

BSOL is the authoritative collection of standards, and using See the latest conferences we offer at
standards can help you and your organization to:
http://shop.bsigroup.com/conferences
• Improve your products or services
• Reduce costs
• Attract new customers
• Increase your competitive edge
• Inspire trust and confidence Sign up to free e-Newsletters
• Improve quality and performance lessening
the likelihood of mistakes
• Make products compatible
• Encourage international trade.

http://shop.bsigroup.com/bsol

BSI Standards Development


To keep up-to-date with the latest developments in
website construction and Eurocodes, sign up to receive our
sector-specific newsletters at
See what’s happening at BSI:
• Search through standards currently
http://shop.bsigroup.com/newsletters
in development and monitor their
progress
• Discover and comment on proposals
for new standards and draft standards BSI Membership
• Find out which trade associations and professional
bodies are represented on BSI committees and discover
which standards they are working on
• Suggest a new standard and put forward your ideas

http://standardsdevelopment.bsigroup.com

BSI Membership gives you access to an exclusive range


of services aimed at helping your business to prosper
in an increasingly competitive marketplace.
Eurocodes brochure
www.bsimembers.com
Download the latest Eurocodes brochure
http://shop.bsigroup.com/eurocodes
How to buy online…

1 Visit our online shop at http://shop.bsigroup.com and 5 Log in or register to buy online
type in a keyword or a standard number/title into the
search box.
6 Follow the payment instructions

2 Click on the publication you require in the search results


7 Download your standard or wait for the
hard copy to deliver
3 Add the publication to your basket

…it’s that easy!


4 Continue shopping or if you are ready to finish
shopping, click on ‘checkout’

BSI Membership
Standards are recognized as a powerful business tool and BSI Membership gives you access to an exclusive range of
can define crucial aspects of a company's safety, quality services aimed at helping your business to prosper in an
and reliability. They also enable businesses to operate in increasingly competitive marketplace.
a global market.

Services and benefits include:


• 50% off British standards • Free subscription to Update Standards and access to
• 50% off the subscription of our flagship database product, Business Standards Online
British Standards Online (BSOL) • Free entry in BSI's searchable online Member Directory
• Free P&P and credit facilities • Access to PLUS (Private List Updating Service)
• And much more

To find out more call +44 (0)20 8996 7002 or visit www.bsimembers.com

Please quote marketing reference BR-BUILD-10 when placing your order.

BSI Group Headquarters


389 Chiswick High Road London W4 4AL UK
FSC Logo
Tel +44 (0)20 8996 9000
Printed responsibly using vegetable-oil based inks
Fax +44 (0)20 8996 7400 on 100% recycled paper. Printed on FSC material
www.bsigroup.com under chain of custody conditions by an FSC
certified printer. Please recycle after use.
© BSI copyright 02/10

You might also like