You are on page 1of 89

ITEM DESCRIPTION UNIT RATE

B - EXCAVATION & EARTH WORK

B 01 Site preparation, Clearing site vegetation, removing bushes, Sqr. 765.00


shrubs & top soil to a depth not exceeding 6" and removing all
debris away from site.

B 02 Manual Excavation over site to reduce level in any material Cube 1130.00
(except rock requiring blasting) including depositing and levelling
as directed up to a distance not exceeding 30'.

B 03 Manual Excavation over site to reduce level in any material Cube 1280.00
(except rock requiring blasting ) including depositing and levelling
as directed distance exceeding 30'-0" but not exceeding 1/4
mile.

Shoring, dewatering and rock blasting if necessary for the


excavation, shall be paid for separately for item B04 - B06

B 04 Manual Excavation for column, wall, staircase foundations in any Cube 1645.00
material (except rock requiring blasting) up to 5'-0" depth, part
return fill in and ram and surplus depositted within site as
directed.

B 05 Manual Excavation for column, wall, staircase foundations in any Cube 2525.00
material (except rock requiring blasting) depth exceeding 5'-0"
and not exceeding 10'-0", part return fill in and ram and surplus
depositted within site as directed.

B 06 Manual Excavation for column, wall, staircase foundations in any Cube 2720.00
material (except rock requiring blasting) depth exceeding 10'-0"
and not exceeding 15'-0", part return fill in and ram and surplus
depositted within site as directed.

B 07 Supplying and installation of pre-cast cylinders for soil Item 16000.00


improvement of 4'-0" dia. Hume pipes of wall thickness 2" and
height of 2'-0"( Nominal Reinforced type ) and lowering hume
pipes to loose soils with water table close to ground level toa
depth of 12'-0" below the ground level. Rate shall include for
removal of soil from inside the rings and lowering while de-
watering up to the required depth of 12'-0".(Rate per 12'-0" depth
per location)

B 08 Earth work supports,(Open planking) in trenches total depth up to Sq.ft. 77.00


5'-0", distance between opposing faces not exceeding 6'-6"

B 09 Earth work supports,(Open planking) in trenches total depth Sq.ft. 145.00


exceeding 5'-0" and not exceeding 10'-0", distance between
opposing faces not exceeding 6'-6"

B 10 Earth work supports,(Open planking) in trenches total depth Sq.ft. 210.00


exceeding 10'-0" and not exceeding 15'-0", distance between
opposing faces not exceeding 6'-6"

Engineering organization, W.P. Page 1 BSR 2010


ITEM DESCRIPTION UNIT RATE

B 11 Earth work supports,(Close planking) in trenches total depth up Sq.ft. 130.00


to 5'-0", distance between opposing faces not exceeding 6'-6"

B 12 Earth work supports,(Close planking) in trenches total depth Sq.ft. 250.00


exceeding 5'-0" and not exceeding 10'-0", distance between
opposing faces not exceeding 6'-6"

B 13 Earth work supports,(Close planking) in trenches total depth Sq.ft. 365.00


exceeding 10'-0" and not exceeding 15'-0", distance between
opposing faces not exceeding 6'-6"

Approved earth shall mean filling materials that comply to the


following :

The earth shall be free of vegetation, roots, boulders, easily


(a) decomposable materials, chemicals, industrial waste, plastic
etc.

(b) The maximum size of particle shall not exceed 75mm.

The earth shall be well graded and the silt and clay (fines)
(c)
content shall not be more than 25%

(d) The Standerd proctor density shall be grater than 1.70g/cm3

B 14 Approved hard Earth spreading , leveling watering and manual Cube 1130.00
compaction, using standered cast iron stamper or equivalent and
filling in 150 mm thick layers (loose volume) in respected area
(Earth available at site)

B 15 Approved earth supplying within 16 Km from the source and Cube 1850.00
piled at site (measured at piled volume)

B 16
Transport of Earth per Km per cube for over and above 16km 1 km 120.00
B 17 Off-shore Sand supply within 16km from the source (for Cube 6465.00
distances over 16km, add Rs. 75 per Cube per Killo Meter)
subject to the specific approval by the Divisional Engineer.
Rate is applicable for loose volume. *** In case of measurements
to be done on compacted volume multiply the rate by 1.2.

B 18 Compaction of Earth including watering in 225mm thick layers Cube 825.00


(measured on piled volume) using machine Rammer. Rate include
hire charges of the machine rammer. *** This rate is applicable
for building construction with earth work not exceeding 50
cubes. (earth available at site).

B 19 Manually spreading and leveling piled approved earth - H.S.R. Cube 285.00
item Ew -002 (applicable for filling out side the building area)
rate without compaction.

B 20
Bulk excavation using machinery Cube 1050.00

Engineering organization, W.P. Page 2 BSR 2010


ITEM DESCRIPTION UNIT RATE

B 21
Bulk excavation using machinery including operator, Fuel, etc... Per Hour 500.00

C - CONCRETE
Note:

The Quality of the concrete should confirm to the relevant


B.S., S.L.S. and ICTAD specification for Building works.

IN - SITU PLAIN CONCRETE

C 01 Cement concrete 1:3:6 (2") in wall foundation(Mass concrete) Cube 23910.00


Cement concrete 1:3:6 (1 1/2") in foundation and under column Cube 25420.00
C 02 footings (concrete mixer)

Cement concrete 1:3:6 (1 1/2") in foundation and under column Sqr. 6355.00
C 03 footings (lean concrete of 3" thickness)

Cement concrete 1:3:6 (1") in foundation and under column Sqr. 4110.00
C 04 footings (lean concrete of 2" thickness)

Cement concrete 1:3:6 (1") in foundation and under column Cube 24655.00
C 05 footings

Cement concrete bedding 1:2 1/2:5(1") in Floors / Toilets/ Cube 26610.00


C 06 Garage/ Factory floors

IN - SITU REINFORCED CONCRETE


C 07 Cement concrete 1:2:4 (3/4") footings, beams/lintels and columns Cube 31750.00
in ground floor using mixer and vibrator.

C 08 Cement concrete 1:2:4 (3/4") in beams/lintols and columns in first Cube 32700.00
floor using mixer and vibrator.

C 09 Cement concrete 1:2:4 (3/4") in beams/lintols and columns in Cube 33340.00


second floor using mixer and vibrator.

C 10 Cement concrete 1:1 1/2:3 (3/4") using mixer and vibrator in Cube 34200.00
ground floor.

C 11 Cement concrete 1:1 1/2:3 (3/4") using mixer and vibrator in first Cube 35230.00
floor

C 12 Cement concrete 1:1 1/2:3 (3/4") using mixer and vibrator in Cube 35915.00
second floor

C 13 4" Thick R.C.C slab in cement concrete 1:2:4(3/4") in first floor Sqr. 11180.00
using mixer and vibrator.

C 14 4 1/2" thick R.C.C. slab in cement concrete 1:2:4(3/4") in first Sqr. 12160.00
floor using mixer and vibrator.

C 15 5" thick R.C.C. slab in cement concrete 1:2:4(3/4") in first floor Sqr. 13145.00
using mixer and vibrator.

Engineering organization, W.P. Page 3 BSR 2010


ITEM DESCRIPTION UNIT RATE

C 16 5 1/2" thick R.C.C. slab in cement concrete 1:2:4(3/4") in first Sqr. 14570.00
floor using mixer and vibrator.

C 17 6" thick R.C.C. slab in cement concrete 1:2:4(3/4") in first floor Sqr. 15615.00
using mixer and vibrator.

C 18 Pre-cast lintols size 9" x 6" deep in 1:2:4(3/4") cement concrete, L.ft. 310.00
reinforced with 3 nos of 10mm dia. tor steel bars and 6mm mild
steel stirrups @ 8" c/c including necessary formwork in ground
floor.

C 19 Pre-cast lintols size 9" x 6" deep in 1:2:4(3/4") cement concrete, L.ft. 322.00
reinforced with 3 nos of 10mm dia. tor steel bars and 6mm mild
steel stirrups @ 8" c/c including necessary formwork in first
floor.

C 20 Pre-cast lintols size 9" x 6" deep in 1:2:4(3/4") cement concrete, L.ft. 328.00
reinforced with 3 nos of 10mm dia. tor steel bars and 6mm mild
steel stirrups @ 8" c/c including necessary formwork in second
floor.

C 21 Pre-cast lintols size 4 1/2" x 6" deep in 1:2:4(3/4") cement L.ft. 245.00
concrete, reinforced with 2 nos of 10mm dia. tor steel bars and
6mm mild steel stirrups @ 6" c/c including necessary formwork
ground floor.

C 22 Pre-cast lintols size 4 1/2" x 6" deep in 1:2:4(3/4") cement L.ft. 252.00
concrete, reinforced with 2 nos of 10mm dia. tor steel bars and
6mm mild steel stirrups @ 6" c/c including necessary formwork
first floor.

C 23 Pre-cast lintols size 4 1/2" x 6" deep in 1:2:4(3/4") cement L.ft. 258.00
concrete, reinforced with 2 nos of 10mm dia. tor steel bars and
6mm mild steel stirrups @ 6" c/c including necessary formwork
in second floor.

C 24 Stiffiner columns size 4" x 6" in 1:2:4 (3/4") reinforced cement L.ft. 270.00
concrete with 2 nos of 10mm dia. Tor steel bars , including
necessary form work.

C 25 Stiffiner columns size 4 1/2" x 6" in 1:2:4 (3/4") reinforced L.ft. 290.00
cement concrete with 2 nos of 10mm dia. Tor steel bars ,
including necessary form work.

C 26 Stiffiner columns size 9" x 6" in 1:2:4 (3/4") reinforced cement L.ft. 465.00
concrete with 2 nos of 10mm dia.Tor steel bars and 6mm mild
steel stirrups @ 6" c/c , including necessary form work.

C 27 Copings on the 4 1/2" thick walls, size of 6 1/2" x 3" in 1:2:4 L.ft. 230.00
(3/4") reinforced cement concrete with 1 no of 10mm dia. Tor
steel bar, including necessary form work & 1:3 cement plastering
, as per the Drawing No:- AR/DETAIL DRG/2010/01/10 &
Sheet No. 02

Engineering organization, W.P. Page 4 BSR 2010


ITEM DESCRIPTION UNIT RATE

C 28 Copings on the 6" thick walls, size of 8" x 3" in 1:2:4 (3/4") L.ft. 280.00
reinforced cement concrete with 2 nos of 10mm dia. Tor steel
bars and 6mm mild steel @ 6" c/c, including necessary form work
& 1:3 cement plastering , as per the Drawing No:- AR/DETAIL
DRG/2010/01/10 & Sheet No. 02
C 29 Copings on the 9" thick walls, size of 11" x 6" approx. in 1:2:4 L.ft. 365.00
(3/4") reinforced cement concrete with 2 nos of 10mm dia. Tor
steel bars and 6mm mild steel @ 6" c/c, including necessary form
work & 1:3 cement plastering , as per the Drawing No:-
AR/DETAIL DRG/2010/01/10 & Sheet No. 02
C 30 Cement concrete drains of internal size 9" wide and depth varies L.ft. 465.00
from 6" - 9" ,consist of 3" thick base and side walls in 1:3:6(1")
including 1/2" thick 1:3 rendering without ramp including
necessary formwork.
C 31 Cement concrete drains of internal size 9" wide and depth varies L.ft. 630.00
from 6" - 9" ,consist of 3" thick base and side walls in 1:3:6(1")
including 1/2" thick 1:3 rendering with 3" thick & 1'-6" width
concrete ramp, including necessary formwork.

C 32 Cement concrete drains of internal size 9" wide and depth varies L.ft. 785.00
from 6" - 9" ,consist of 3" thick base and side walls in 1:3:6(1")
including 1/2" thick 1:3 rendering with 3" thick & 2'-6" width
concrete ramp, including necessary formwork.

C 33 Construction of concrete drain 300mm width x 350mm depth and L.ft. 1530.00
varies up to 400mm. Consists of necessary excavation in hard
earth, 75mm thick concrete base and walls in Grade 20 concrete,
fair finish internal surface with size 450mm wide x 600mm long,
75mm thick Grade 20 removable cover slabs with side formwork.
Drain and cover slab reinforced with tor steel 10mm at 150m c/c
both ways.

C 34 Construction of concrete drain 300mm width x 350mm depth and L.ft. 1160.00
varies up to 400mm. Consists of necessary excavation in hard
earth, 75mm thick concrete base and walls in Grade 20 concrete,
fair finish internal surface without cover slab. Drain reinforced
with tor steel 10mm at 150m c/c both ways.

C 35 Construction of concrete drain 450mm width x 600mm minimum L.ft. 2705.00


depth and varies up to 750mm. Consists of necessary excavation
in hard earth, 100mm thick concrete base and walls in Grade 20
concrete, fair finish internal surface with adequate slope, 75mm
thick Grade 20 removable cover slabs with side formwork. Drain
and cover slab reinforced with tor steel 10mm at 150m c/c both
ways.

C 36 Construction of concrete drain 450mm width x 600mm minimum L.ft. 2130.00


depth and varies up to 750mm. Consists of necessary excavation
in hard earth, 100mm thick concrete base and walls in Grade 20
concrete, fair finish internal surface with adequate slope without
cover slab, with necessary formwork. Drain reinforced with tor
steel 10mm at 150m c/c both ways.

Engineering organization, W.P. Page 5 BSR 2010


ITEM DESCRIPTION UNIT RATE

C 37 Casting of 6" x 6" x 6" concrete cubes on a steel mould, curing No. 1100.00
for 7 days and testing for compressive strength at an approved
laboratory (rate includes transport of cubes from site to
laboratory ).

C 38 Continuous curing of reinforced concrete columns of size up to L.ft. 100.00


18" x 18" by covering with gunnies and spraying water and
keeping wet for a period of 5 days after removal of shuttering.

READY MIX CONCRETE


C 39 Ready mix concrete of grade 20(20 N/mm2) confirming to SLS Cu.m 9615.00
1144-1997, transport 20km from batching plant.
C 40 Ready mix concrete of grade 25(25 N/mm2) confirming to SLS Cu.m 9940.00
1144-1997, transport 20km from batching plant.
C 41 Ready mix concrete of grade 30(30 N/mm2) confirming to SLS Cu.m 10425.00
1144-1997, transport 20km from batching plant.
C 42
Transport charges per Km per m3 for over and above 20 km. Km 34.00
C 43
Placing , levelling , vibrating the concrete. Cu.m 400.00
C 44
Pumping charge for quantites up to 35 m3 by pump car Item 12000.00
C 45 3 Cu.m 400.00
For more than 35 m additional pumping charges. (Rate for every
m3 over and above 35 m3)

D - FORM WORK
Note:

The rates given for items D 02, D 03 to D 08 herein are


applicable for plywood sheets of 15 mm thick. Hence the rate
(a)
is valid only if the shuttering / formwork for footing , column ,
beams , lintel, walls, slabs are of 15 mm thick ply boards.

Any deviation from the specified materials, specified thickness


and the arrangement of formwork given in this document
(b) should require the written approval of the Divisional
Engineer. Rate for such deviation from the item description
will be decided by the D(B/SW)

For ordinary plywood of 15 mm thick boarding as shuttering,


(c)
(Even for WBP sheets the same rate shall be applicable).

D 01 Shuttering for sides of foundation with 1" thick rubber planking Sqr. 3725.00
including dismantling

D 02 Shuttering for sides and bottom of plinth beams, ground beams Sqr. 13385.00
including dismantling in 15mm thick plywood board.

Engineering organization, W.P. Page 6 BSR 2010


ITEM DESCRIPTION UNIT RATE

D 03 Shuttering for floor slab including dismantling in 15mm thick Sqr. 12080.00
Plywood board.

D 04 Shuttering for columns including dismantling in 15mm thick Sqr. 15850.00


Plywood board.

D 05 Shuttering for Beams/Lintols including dismantling in 15mm Sqr. 18735.00


thick Plywood Board

D 06 Shuttering for floor slab including dismantling in 15mm thick Sqr. 10570.00
Plywood board support by scaffolding up to 12'.

D 07 Shuttering for floor slab including dismantling in 15mm thick Sqr. 11060.00
Plywood board support by scaffolding up to 16'.

D 08 Shuttering for Beams/Lintols including dismantling in 15mm Sqr. 17115.00


thick Plywood Board support by G.I Jack.

Note:

The rates given in Items D09, D10, D11 herein are applicable
for Rubber planks. The rubber planks are allowed only for
minor works and should be used with the written approval of
the D.E.

D 09 Shuttering for Beams/Lintols including dismantling. Sqr. 5700.00


D 10 Shuttering for stiffener columns between wall panels in 9" walls, Sqr. 5100.00
4 1/2" walls and in boundary walls.

D 11 Shuttering for R.C.C. copings in top of balcony , stair and Sqr. 3700.00
boundary walls and pre - cast lintel sides

E - REINFORCEMENT
E 01 Mild steel reinforcement to slabs, beams, lintols, columns, Kg 150.00
footings & etc.. bent to shape, laid in position and tied with
16 B.W.G. binding wire in Ground floor .

E 02 Mild steel reinforcement to slabs, beams, lintols, columns, Kg 154.00


footings & etc.. bent to shape, laid in position and tied with
16 B.W.G. binding wire in first floor .

E 03 Mild steel reinforcement to slabs, beams, lintols, columns, Kg 157.00


footings & etc.. bent to shape, laid in position and tied with
16 B.W.G. binding wire in second floor .

E 04 Tor steel reinforcement to slabs, beams, lintols, columns, footings Kg 150.00


& etc.. bent to shape, laid in position and tied with 16
B.W.G. binding wire in Ground floor.

E 05 Tor steel reinforcement to slabs, beams, lintols, columns, Kg 154.00


footings & etc.. bent to shape, laid in position and tied with
16 B.W.G. binding wire in first floor.

Engineering organization, W.P. Page 7 BSR 2010


ITEM DESCRIPTION UNIT RATE

E 06 Tor steel reinforcement to slabs, beams, lintols, columns, Kg 157.00


footings & etc.. bent to shape, laid in position and tied with
16 B.W.G. binding wirein second floor.

E 07 Rate for testing of Tor-steel specimen of 1m length for Sample 3800.00


mechanical properties at an approved laboratory.

E 08 Application of two coats of Corrosion resistant primer of Sq.ft. 115.00


"BARRA ZINC SP" or equivalent to all exposed
reinforcements including preparing surfaces.

F - BRICK MASONRY
F 01 Brick work in cement and sand 1:8 in foundation up to D.P.C. Cube 23900.00
level.

F 02 Brick work in cement and sand 1:8 in super Structure in ground Cube 24695.00
floor. ( 9" thick brick work)

F 03 Brick work in cement and sand 1:8 in 1st floor level.(9" thick Cube 25930.00
brick work)

F 04 Brick work in cement and sand 1:8 in 2nd floor level.(9" thick Cube 26425.00
brick work)

F 05 Brick work in cement and sand 1:8 in superstructure in ground Cube 20195.00
floor (8" thick brick work)

F 06 Brick work in cement and sand 1:8 in 1st floor level.(8" thick Cube 21200.00
brick work)

F 07 Brick work in cement and sand 1:8 in 2nd floor level.(8" thick Cube 21600.00
brick work)

F 08 Brick work in cement and sand 1:5 in 4 1/2" thick walls in ground Sqr. 10200.00
floor.

F 09 Brick work in cement and sand 1:5 in 4 1/2" thick walls in 1st Sqr. 10710.00
floor

F 10 Brick work in cement and sand 1:5 in 4 1/2" thick walls in Sqr. 10915.00
2nd floor

F 11 Brick drain internal size 9" x 9"(average depth) , including L.ft. 360.00
excavation, back filling , 3" thick plain concrete 1:3:6(1") base, 4
1/2" thick Brick side walls in cement and sand mortar 1:5 ,
rendering 1/2" thick cement and sand 1:3 and finish smooth with
cement putty.

F 12
3" thick brick paving in cement and sand 1:8 mix Sqr. 7185.00
F 13 4 1/2" thick wire cut brick wall in cement and sand 1:5 in ground Sqr. 12930.00
floor.

F 14 4 1/2" thick wire cut brick wall in cement and sand 1:5 in first Sqr. 13580.00
floor.

Engineering organization, W.P. Page 8 BSR 2010


ITEM DESCRIPTION UNIT RATE

F 15 4 1/2" thick wire cut brick wall in cement and sand 1:5 in second Sqr. 13840.00
floor.

F 16 9" thick wire cut brick wall in cement and sand 1:5 in ground Sqr. 24590.00
floor.

F 17 9" thick wire cut brick wall in cement and sand 1:5 in first floor. Sqr. 25820.00

F 18 9" thick wire cut brick wall in cement and sand 1:5 in second Sqr. 26315.00
floor.

F 19 Steps 1' - 1 1/2" in brick in cement and sand 1:5 with 1/2" thick L.ft. 260.00
rendering in cement and sand 1:2 including 6" high foundation.

F 20
Brick piers in cement and sand 1:5 in ground floor. Cube 25960.00
F 21
Brick piers in cement and sand 1:5 in first floor. Cube 27260.00
F 22
Brick piers in cement and sand 1:5 in second floor. Cube 27780.00

G - CELLULAR AND SOLID BLOCK MASONRY


G 01 8" thick cement sand Cellular block wall (blocks confirming to Sqr. 14995.00
S.L.S. 855 and subject to the approval of the quality of the
blocks) in cement and sand mortar 1:5 in ground floor.

G 02 6" thick cement sand Cellular block wall (blocks confirming to Sqr. 11380.00
S.L.S. 855 and subject to the approval of the quality of the
blocks) in cement and sand mortar 1:5 in ground floor.

G 03 4" thick cement sand Cellular block wall (blocks confirming to Sqr. 8670.00
S.L.S.855 and subject to the approval of the quality of the blocks)
in cement and sand mortar 1:5 in ground floor.

G 04 6" thick cement sand Solid block wall (blocks confirming to Sqr. 14525.00
S.L.S. and subject to the approval of the quality of the blocks) in
cement and sand mortar 1:5 in ground floor.

G 05 4" thick cement sand Solid block wall (blocks confirming to S.L.S Sqr. 11655.00
and subject to the approval of the quality of the blocks) in cement
and sand mortar 1:5 in ground floor.

G 06 Supply and fixing 1'-0" x 1'-0" cement grill on wall. Sq.ft. 125.00

G 07 Supply and fixing glass blocks size 8" x 8" Sq.ft. 900.00

H - RUBBLE MASONRY
H 01 Random rubble (6"-9") masonry in cement mortar 1:5 in wall Cube 18220.00
foundation and retaining walls.

J - FLOORING
J 01 3/4" thick D.P.C. in cement sand 1:2 finished with 2 coats of Sqr. 6500.00
D.P.C. tar and blinded with sand.

Engineering organization, W.P. Page 9 BSR 2010


ITEM DESCRIPTION UNIT RATE

J 02 Gauge 700 polythene damp proof membrane with 6" laps laid Sqr. 300.00
under floors

J 03 Rendering 1/2" thick in cement and sand 1:2 in exposed concrete Sqr. 3685.00
surfaces and garage floors finished smooth with neat cement
slurry.

J 04 Rendering 1/2" thick in cement and sand 1:2 in exposed concrete Sqr. 4325.00
surfaces and garage floors finished smooth with colour pigment.
( Pigment added at 2.5 Kg / Sqr )

J 05 Rendering 1/2" thick in cement and sand 1:3 in R.C.C. floors and Sqr. 3800.00
paved floors finished smooth with neat cement slurry and colour
pigment.

J 06 Rendering 1/2" thick in cement and sand 1:3 in R.C.C. floors and Sqr. 3225.00
paved floors finished smooth without colour pigment.

J 07 1/2" thick Rendering to the top surface of the sunshade with Sqr. 5800.00
cement and sand 1:3 finished smooth and treated with two coats
of "Aqua Tuff " by M/s Lankem or approved equivalent and 1:8
slope should be made.

J 08 Skirting 4" x 1/2" thick in cement and sand 1:3 projected or flush L.ft. 53.00
to walls finished with cement floating including forming groove.

J 09 Skirting 4" x 1/2" thick in cement and sand 1:3 projected or flush L.ft. 57.00
to walls finished with colour pigmented neat cement including
forming groove.

J 10 Skirting 6" x 1/2" thick in cement and sand 1:3 projected flush to L.ft. 66.00
walls finished with cement floating including forming groove in
neat cement slurry.

J 11 Skirting 6" x 1/2" thick in cement and sand 1:3 projected flush to L.ft. 72.00
walls finished with colour pigmented neat cement including
forming groove.

J 12 3" thick brick paving in cement sand 1:8 and 1/2" thick cement Sqr. 12080.00
rendered in 1:3 floated with neat cement.

J 13 3" thick brick paving in cement sand 1:8 and 1/2" thick cement Sqr. 12725.00
rendered in 1:3 floated with neat cement and colour pigment.

J 14 Floor cement concrete in 1:2 1/2":5(1") to a thickness of 3" with Sqr. 10250.00
1/2" thick rendering 1:2 with expansion joints filled with cement
and sand.

J 15 Brick work in cement 1:5 wearing & throating on 4 1/2" brick L.ft. 186.00
wall including 1/2" thick 1:3 cement rendering

J 16 Brick work in cement 1:5 wearing & throating on 9" brick wall L.ft. 255.00
including 1/2" thick 1:3 cement rendering

Engineering organization, W.P. Page 10 BSR 2010


ITEM DESCRIPTION UNIT RATE

Water Proofing

The rates for Items J 17 to J 20 are strictly applicable, subject


to the fulfillment of the following conditions.

The waterproofing contractor (or sub-contractor) should be a


(a) registered specialist contractor at the ICTAD in the category
of water proofing.

The Contractor shall submit a written warranty of at least 5


year to cover on the quality of the material, suitability of the
(b)
material for the situation and the workmanship including
water tightness.

The water proofing material shall conform to relevant British,


(c)
Euro or ASTM specifications

Application of liquid polymer cement water proofing agents


(d)
for the following areas:
J 17 Water Proofing the inner surface of walls and floor slab of toilets Sq.ft. 240.00
and balconies where a waterproofing is necessary before tiling,
Application of "Baralastic" polymer modified cementitious
waterproofing agent after cleaning the subtrate all as per
manufacturer's specifications with 10 years warranty on
application.Rate shall include for ponding test for a 300mm water
height kept for a period of 48 hours.

J 18 Flat roofs, concrete/masonry tanks, wet areas of toilets including Sq.ft. 195.00
bathrooms, exposed balconies, concrete gutters. "Smart flex",
"Tharoseal" or any other equivalent product marketed/installed by
specialist contractor registered at ICTAD.

Application of cementitious type agents


J 19 On newly cast under ground sumps, swimming pools basements. Sq.ft. 310.00
"Osmoseal", "Xypex", "Vandex" or any other equivalent product
marketed/installed by a specialist contractor registered at ICTAD.

Application of membrane type agents


J 20 On large flat roofs, gutters, basements. "POLYFLEX" - 3mm Sq.ft. 395.00
thick bituman based membrane or any other equivalent product
marketed/installed by a specialist contractor registered at ICTAD,
including 1 : 3 cement,sand protective screed laid to slope. Rate
shall include the formation of edges, torch welding and metal strip
on vertical walls.

*** The above rates include the cost of surface preparation,


but do not include the cost of protective masonry screed. The
approving authority for equivalent products will be the
Deputy Chief Secretary (Engineering)

Engineering organization, W.P. Page 11 BSR 2010


ITEM DESCRIPTION UNIT RATE

Anti-Tretement
J 21 Anti-tretement for the new construction with applying Sq.ft. 17.00
Biflexthrine 10Tc (Biflex ) or approved equivelant , Dialuted
chemicals 1:200 ratio with water after supplying the sealed bottle
with lables to the site and should be followed the manufacture
standards of application including horizontal & vertical barriers.
It should be 10 years warranty on application.

J 22 Anti-tretement for the post construction (Existing building ) with Sq.ft. 21.00
applying Biflexthrine 10Tc (Biflex ) or approved equivelant ,
Dialuted chemicals 1:200 ratio with water after supplying the
sealed bottle with lables to the site and should be followed the
manufacture standards of application including horizontal &
vertical barriers. It should be not less than 5 years warranty on
application.

K - PLASTERING
K 01 5/8" thick plastering to plinth wall in cement sand 1:3 including Sqr. 3545.00
cement floating.

K 02 Plastering 5/8" thick to walls in cement, lime or equivelent Sqr. 3650.00


chemical product (Febmix) and sand 1:1:5 finished semi-rough
with wooden float. (Sand to be seived).

K 03 Plastering 5/8" thick to reveals width not exceeding 6" in cement, L.ft. 81.00
lime or equivelent chemical product (Febmix) and sand 1:1:5
finished semi-rough with wooden float.

K 04 Plastering 5/8" thick to walls in cement, lime or equivelent Sqr. 4775.00


chemical product (Febmix) and sand 1:1:5 finished smooth with
lime putty.

K 05 Plastering 5/8" thick to reveals width not exceeding 6" in cement, L.ft. 91.00
lime or equivelent chemical product (Febmix) and sand 1:1:5
finished smooth with lime putty.

K 06 Plastering 3/8" thick to soffit of slab, sunshade, sides and soffit of Sqr. 5640.00
beams, stair cases and sides of columns in cement and sand 1:3
including floating with lime putty.

K 07 Plastering 3/8" thick to soffit of slab, sunshade, sides and soffit of Sqr. 5260.00
beams, stair cases and sides of columns in cement & sand 1:3
finished semi rough with wooden float.

K 08 Forming drip for sunshade edge cement & sand 1: 2 finish semi L.ft. 75.00
rough.

K 09 Plastering 3/4" thick to black board in cement & sand 1:3 finish Sqr. 10470.00
semi rough and Rendering cement floating coat using black
cement finished smooth with carborandum stone. Including
preparation of border.

Engineering organization, W.P. Page 12 BSR 2010


ITEM DESCRIPTION UNIT RATE

K 10 Plaster bands 6" x 1/2" in cement & sand 1:3 finished semi rough, L.ft. 110.00
extra over the plastering as per the Drawing No:- AR/DETAIL
DRG/2010/01/10 & Sheet No. 01
K 11 Plaster bands 9" x 1/2" in cement & sand 1:3 finished semi rough, L.ft. 140.00
extra over the plastering as per the Drawing No:- AR/DETAIL
DRG/2010/01/10 & Sheet No. 01

L - TILING
Note:
Tiles should comply with European standard specification
CEN 177.

For Item L01 - L03 Should be tile range manufractured by


Lanka Wall Tile or approved equivalant.

Wall Tiling
L 01 Glazed ceramic wall tiling of size 8" x 12" approved colour, Sqr. 23630.00
supplying and fixing to walls on a 1:3 cement sand mortar layer,
and pointed with tile grout to match the tile. *** (Rate does not
include the 1:3 cement sand mortar layer and is separately
measured under item L04)

L 02 Glazed ceramic wall tiling of size 12" x 16" approved colour, Sqr. 22795.00
supplying and fixing to walls on a 1:3 cement sand mortar layer,
and pointed with tile grout to match the tile. *** (Rate does not
include the 1:3 cement sand mortar layer and is separately
measured under item L04)

L 03 Glazed porcelain wall tiling of size 24" x 12" approved colour, Sqr. 35285.00
supplying and fixing to walls on a 1:3 cement sand mortar layer,
and pointed with tile grout to match the tile. *** (Rate does not
include the 1:3 cement sand mortar layer and is separately
measured under item L04)

L 04 Cement and sand 1:3 screed of 1/2" thick backing to receive wall Sqr. 3160.00
tiles.

Floor Tiling

Note :

For Item No. L05 to L16 Shall be Homogenous, Vitreous


porcelain floor tiles of industrial grade (heavy duty) Floor
tile range manufractured by Rocell or approved equivalant.
*** Rate includes the cost of 1:3 motar leveling bed.

L 05 Homogeneous vitreous porcelain glazed or unglazed floor tile 8" x Sqr. 26280.00
8" paving on 1:3 cement & sand bedding and pointed with tile
grout to match the tile. ( Heavy duty )

Engineering organization, W.P. Page 13 BSR 2010


ITEM DESCRIPTION UNIT RATE

L 06 Homogeneous vitreous porcelain glazed or unglazed floor tile 12" Sqr. 25980.00
x 12" paving on 1:3 cement & sand bedding and pointed with tile
grout to match the tile. ( Heavy duty )

L 07 Homogeneous vitreous porcelain glazed or unglazed floor tile 16" Sqr. 26440.00
x 16" paving on 1:3 cement & sand bedding and pointed with tile
grout to match the tile. ( Heavy duty )

L 08 Homogeneous vitreous porcelain polished floor tile 12" x 12" Sqr. 39945.00
paving on 1:3 cement & sand bedding and pointed with tile grout
to match the tile.( Heavy duty )

L 09 Homogeneous vitreous porcelain polished floor tile 16" x 16" Sqr. 40680.00
paving on 1:3 cement & sand bedding and pointed with tile grout
to match the tile. ( Heavy duty )

L 10 Homogeneous vitreous porcelain glazed floor tile 18" x 18" Sqr. 24445.00
paving on 1:3 cement & sand bedding and pointed with tile grout
to match the tile. ( Heavy duty )

L 11 Homogeneous vitreous porcelain rectified floor tile 24" x 12" Sqr. 31940.00
paving on 1:3 cement & sand bedding and pointed with tile grout
to match the tile. ( Heavy duty )

L 12 Homogeneous vitreous porcelain rectified floor tile 24" x 16" Sqr. 29120.00
paving on 1:3 cement & sand bedding and pointed with tile grout
to match the tile. ( Heavy duty )

L 13 Homogeneous vitreous porcelain rustic floor tile 12" x 12" for Sqr. 25470.00
garage & balcony areas paving on 1:3 cement & sand bedding
and pointed with tile grout to match the tile. ( Heavy duty )

L 14 Supply and laying of 4" high skirting including tile grout to match L.ft. 98.00
the tile of tiling confirming to items L 05 to L 13

L 15 Supply and laying of 4" high skirting including tile grout to match L.ft. 120.00
the tile for staircases.

L 16 Supplying and laying homogeneous vitreous porcelain tiles at Sqr. 43940.00


staircase treads including nosing type paving on 1:3 cement &
sand bedding and pointed with tile grout to match the tile.

Note :

The tiles specified in L17 to L22 are exclusively for


residential/non-public area as specified by an Architect. The
rate is applicable for tiles manufactured by Rocell or equilant
and are of coloured designed tiles.

L 17 Lay Ceramic glazed floor tiles 12" x 12" paving on 1:3 cement Sqr. 20850.00
sand bedding and pointed with tile grout to match the tile.

L 18 Lay Ceramic glazed floor tiles 13" x 13" paving on 1:3 cement Sqr. 24325.00
sand bedding and pointed with tile grout to match the tile.

Engineering organization, W.P. Page 14 BSR 2010


ITEM DESCRIPTION UNIT RATE

L 19 Lay Ceramic glazed floor tiles 16" x 16" paving on 1:3 cement Sqr. 22625.00
sand bedding and pointed with tile grout to match the tile.

L 20 Lay Ceramic glazed floor tiles 18" x 18" paving on 1:3 cement Sqr. 24820.00
sand bedding and pointed with tile grout to match the tile.

L 21 Lay Ceramic glazed floor tiles 24" x 12" paving on 1:3 cement Sqr. 31610.00
sand bedding and pointed with tile grout to match the tile.

L 22 Lay Ceramic glazed floor tiles 24" x 16" paving on 1:3 cement Sqr. 28640.00
sand bedding and pointed with tile grout to match the tile.

Note :

Rate for tiling should include for cement and sand 1:3 backing
20mm thick including pointing and grout to match with tiles
colours and sizes of tiles to approval by the Architect.

L 23 Rough heavy duty bathroom floor tiles of size 8" x 8" of Rocell or Sqr. 23250.00
equivalent, paving on 1:3 cement sand bedding and pointed with
tile grout to match the tiles.

L 24 Rough heavy duty bathroom floor tiles of size 12" x 12" of Rocell Sqr. 22770.00
or equivalent, paving on 1:3 cement sand bedding and pointed
with tile grout to match the tiles.

Granite

The Granite specified sizes,colour and details of paving


decided by Architect and sample should be approved by the
Architect before the construction.

The rate is applicable for Granite manufactured by "Ally


Weerasinghe" or approved equivalent.

Granite should be without any defects from oils , detergents &


chemicals
L 25 Polished Granite size 1'-0" x 1'-0" x 3/4" thick absolutely black Sqr. 175210.00
for vanity top of "Ally Weerasinghe" or approved equivalent , laid
on 1/2" thick cement sand 1:3 screed level off using cement slurry
and 1mm joints to be absolutely in line and flush and grout.

L 26 Polished Granite floor slabs of size 1'-0" x 1'-0" x 3/4" thick Sqr. 175210.00
absolutely black of "Ally Weerasinghe" or approved equivalent ,
laid on 1/2" thick cement sand 1:3 screed level off using cement
slurry and 1mm joints to be absolutely in line and flush and grout.

L 27 Granite floor slabs of size 1'-0" x 1'-0" x 3/4" thick rough finish Sqr. 58640.00
of "Ally Weerasinghe" or approved equivalent , laid on 1/2" thick
cement sand 1:3 screed level off using cement slurry and 1mm
joints to be absolutely in line and flush and grout.

Engineering organization, W.P. Page 15 BSR 2010


ITEM DESCRIPTION UNIT RATE

L 28 Granite floor slabs of size 1'-0" x 1'-0" x 3/4" thick gloss finish of Sqr. 58640.00
"Ally Weerasinghe" or approved equivalent , laid on 1/2" thick
cement sand 1:3 screed level off using cement slurry and 1mm
joints to be absolutely in line and flush and grout.

L 29 Granite floor slabs of size 2'-0" x 1'-0" x 3/4" thick gloss finish of Sqr. 97070.00
"Ally Weerasinghe" or approved equivalent , laid on 1/2" thick
cement sand 1:3 screed level off using cement slurry and 1mm
joints to be absolutely in line and flush and grout.

M - COLOUR WASHING, PAINTING &


POLISHING
M 01 White washing walls two coats in single storied building including Sqr. 475.00
preparing surface.

M 02 White washing walls two coats in two storied building including Sqr. 490.00
preparing surface.

M 03
Painting walls with one coat of wall primer. Sqr. 1225.00
M 04
Painting walls with one coat of emulsion paint. Sqr. 880.00
M 05
Painting walls with two coats of emulsion paint . Sqr. 1770.00
M 06
Painting soffit with one coat of emulsion paint. Sqr. 995.00
M 07
Painting soffit with two coats of emulsion paint. Sqr. 1995.00
M 08
Painting walls with onecoat of weather shield. Sqr. 1340.00
M 09
Painting walls with two coats of weather shield. Sqr. 2160.00
M 10
Painting walls & soffits with one coat of crack binder primer. Sqr. 2195.00
M 11 Cement washing two coats to walls in single storied buildings 385.00
including preparing surface. Sqr.

M 12
Painting walls with enamel paint one coat. Sqr. 1075.00
M 13
Painting walls with enamel paint two coats. Sqr. 2310.00
M 14 Application of plaster coatings of thickness not less than 2mm Sqr. 3480.00
using "Joint compound powder / Skimcoat ", or approved
equivalent to walls, slab, beam, column facings.Rate shall include
for sand papering and surface preparation.
M 15
Painting black boards with two coats of blackboard paint. Sqr. 2195.00
M 16 Preparing and painting old wood work with one coat of enamel Sqr. 1340.00
paint.

M 17 Preparing and painting old wood work with two coats of enamel Sqr. 2110.00
paint.

M 18 Preparing and painting new wood work with primer and two coats Sqr. 2770.00
enamel paint.

Engineering organization, W.P. Page 16 BSR 2010


ITEM DESCRIPTION UNIT RATE

M 19 Preparing and application of water based stain and two coats of Sqr. 11570.00
water based sealant to new wood work. Rate shall include for
preparing the surface.

M 20 Varnishing two coats with polyurethane varnish after sand Sqr. 2560.00
papering and application of sealer coat

M 21 Spray Painting for the wood work as per specified in SCA/4/1 Sqr. 3200.00
clause 14.9 ( f ).

M 22
Wax polishing to timber in panels and floors. Sqr. 680.00
M 23 Applying one coat of approved type floor polish including Sqr. 1080.00
smoothing.

M 24 Painting floors with one coat of quick drying floor paint including Sqr. 1395.00
washing and cleaning surfaces.

M 25 Painting steel work with one coat of anti-corrosive paint with


Sqr. 1135.00
primer including removing corroded scale and wire brushing.
M 26 Painting steel work with two coats of anti-corrosive paint with
Sqr. 1610.00
primer including removing corroded scale and wire brushing.
M 27 Painting steel work with one coat of "EPLACK EPOXY
COALTAR" or approved equivalent as per manufacturer's Sqr. 2525.00
specifications.
M 28 Labour rate for two coats of Emulsion Painting walls including 680.00
scaffolding (Paint & Brushes supplied by the client) Sqr.

M 29 Labour rate for single coat of Emulsion Painting walls including Sqr. 455.00
scaffolding (Paint & Brushes supplied by the client)

M 30 Labour rate for two coats of enamel painting (Paint & Brushes Sqr. 975.00
supplied by the client)

N - DOORS & WINDOWS

Timber :

Refer preamble note for approved species. Finished door


1 sash size of less than 1" thicknesses not allowed. Glass
thickness to be 5mm.

2 Rate shall include for following heavy duty brass furniture.

(a) Doors :- 3 no. 4"x 3" Solid brass hinges

(b) Doors :- 2 no. 6" Solid brass barral bolts

(c) Windows of 4'-0" ht. abo :- 2 no. 4"x 2" Solid brass hinges

(d) Windows above 4'-0" ht. o:- 3 no. 4"x 2" Solid brass hinges

Engineering organization, W.P. Page 17 BSR 2010


ITEM DESCRIPTION UNIT RATE

(e) Windows :- 1 no. 2" Solid brass Brass ring

(f) Windows :- 1 no. 10" Solid brass Casement Stay

(g) Windows :- 1 no. Solid brass Casement Fastner

Doors
N 01 Door flush paneled 1 1/8" thick single sash hung on 3 3/4" x 2 Sq.ft. 770.00
3/4" frame. Rate without brass furniture, painting and lock.

N 02 Door glazed and paneled 1 1/8" thick single sash hung on 3 Sq.ft. 760.00
3/4" x 2 3/4" frame. Rate without brass furniture, painting and
lock.

N 03 Door flush paneled 1" thick single sash hung on 3 3/4" x 2 3/4" Sq.ft. 725.00
frame. Rate without brass furniture, painting and lock.

N 04 Door glazed and paneled 1" thick single sash hung with 3 3/4" x 2 Sq.ft. 740.00
3/4" frame . Rate without brass furniture, painting and lock.

N 05 Door 30mm thick plywood ordinary sash single hung on 3 3/4" x Sq.ft. 465.00
2 3/4" frame. Rate without brass furniture, painting and lock.

N 06 Door 30mm thick plywood (marine) sash single hung on 3 3/4" x Sq.ft. 445.00
2 3/4" frame. Rate without brass furniture, painting and lock.

N 07 Door or window glazed and/or paneled 1 1/8" thick double sash Sq.ft. 795.00
hung on 3 3/4" x 2 3/4" frame. Rate without brass furniture,
painting and lock.

N 08 Door/Window ledged, braced & battened with 3 3/4" x 2 3/4" Sq.ft. 715.00
frames and 7/8" thick sash made out of GINISAPU. Rate
without brass furniture, painting and lock.

N 09 Supply & fixing 1 1/8" thick flush paneled door sash only. Rate Sq.ft. 590.00
without brass furnitures, door lock and painting.

N 10 Supply & fixing 1" thick flush paneled door sash only. Rate Sq.ft. 575.00
without brass furnitures, door lock and painting.

N 11 Supply & fixing 1 1/8" thick glazed & paneled door sash only. Sq.ft. 600.00
Rate without brass furnitures, door lock and painting.

N 12 Supply & fixing 1" thick glazed & paneled door sash only. Rate Sq.ft. 575.00
without brass furnitures, door lock and painting.

N 13 Supply & fixing 30mm thick plywood door sash only. Rate Sq.ft. 270.00
without brass furnitures, door lock and painting.

N 14 Door frame 3 3/4" x 2 3/4" in approved timber supplying & Sq.ft. 410.00
fixing in position.

Engineering organization, W.P. Page 18 BSR 2010


ITEM DESCRIPTION UNIT RATE

Windows
N 15 Window glazed 1 1/8" sash and 3 3/4" x 2 3/4" frame. Rate Sq.ft. 765.00
without brass furniture, painting.

N 16 Window glazed 1" sash and 3 3/4" x 2 3/4" frame. Rate without Sq.ft. 745.00
brass furniture, painting.

N 17 Window glazed 7/8" sash and 3 3/4" x 2 3/4" frame. Rate without Sq.ft. 715.00
brass furniture, painting.

N 18 Timber slats with 3 3/4" x 1 3/4" frame , 1" x 2 1/2" vertical slats Sq.ft. 480.00
at 2 1/2" centers. Painting measured separately.

N 19 Supply & fixing 1 1/8" thick glazed window sash only. Rate Sq.ft. 575.00
without brass furnitures and painting.

N 20 Supply & fixing 1" thick glazed window sash only. Rate without Sq.ft. 550.00
brass furnitures and painting.

N 21 Supply & fixing 7/8" thick glazed window sash only. Rate Sq.ft. 545.00
without brass furnitures and painting.

N 22 Window frame 3 3/4" x 2 3/4" in approved timber supplying & Sq.ft. 420.00
fixing in position.

P - BRASS FOUNDER

Note:

All Iron mongary shall be heavy duty and samples should be


approved by the D.E. Prior to installation.

In view of the variety of door locks available in the market, it


has become necessary to prescribe the exact quality
1 requirements in terms of performance and durability aspects.
The "Union" brand and respective model numbers have been
choosen as a bench mark to establish the said requirements.

The brand name and model number appearing in the


respective BSR items are purely meant to describe the
performance standard of the said fitting/item and does not
2
imply in any manner that only the "Union" brand is
recommended or considered to be restricted to the "Union"
brand.

Any other make/brand that has equivalent performance


3 characteristics are considered as equivalent provided such
fittings met with following criteria.

(a) has an authorized local agent in Sri Lanka

The local agent has been in the trade of the offered make for
(b)
not less than 5 years.

The fittings are manufactured in conformity to BS, JIS,


(c)
A.S.T.M., A.S. or S.L.S. standards.

Engineering organization, W.P. Page 19 BSR 2010


ITEM DESCRIPTION UNIT RATE

The dimensions are/and performance characteristics are in


(d)
par with the stated model.

The brands that may be considered as equivalent are "Miva"


of Japan "Whitco" of Australian make or "Dorma" of
European make.or any other approved make which prior
4
approval to be obtained from Deputy Chief Secretary
(Engineering) after producing necessary catalogues
documents.

The BSR Items No. P 16 - P 21 , P 23 & P 25 - P 27 are


5 payable only after producing an original invoice from the
authorized agent for "Union" brand.

Supplying and fixing 4" x 2 1/2" x 2.5mm thick solid brass hinges
P 01 with-out ball bearing inclusive of brass screws marketted by No. 945.00
M.M.Noorbhoy & company or approved equivalent.

Supplying and fixing 4" x 3" x 2.5mm thick solid brass hinges
P 02 with-out ball bearing inclusive of brass screws marketted by No. 1110.00
M.M.Noorbhoy & company or approved equivalent.

Supplying and fixing 5" x 3" x 2.5mm thick solid brass hinges
P 03 with-out ball bearing inclusive of brass screws marketted by No. 1340.00
M.M.Noorbhoy & company or approved equivalent.

Supplying and fixing heavy duty soild brass casement fastener


P 04 inclusive of brass screws marketted by M.M.Noorbhoy & No. 875.00
company or approved equivalent.

Supplying and fixing heavy duty solid brass casement stay - 6"
P 05 inclusive of brass screws marketted by M.M.Noorbhoy & No. 605.00
company or approved equivalent.
Supplying and fixing heavy duty solid brass casement stay - 12"
P 06 inclusive of brass screws marketted by M.M.Noorbhoy & No. 1115.00
company or approved equivalent.
Supplying and fixing heavy duty solid brass 4" centre pivot
P 07 inclusive of brass screws marketted by M.M.Noorbhoy & Pair 560.00
company or approved equivalent.
Supplying and fixing 4" long heavy duty solid brass tower bolt
P 08 inclusive of brass screws marketted by M.M.Noorbhoy & No. 800.00
company or approved equivalent.

Supplying and fixing 6" long heavy duty solid brass tower bolt
P 09 inclusive of brass screws marketted by M.M.Noorbhoy & No. 1030.00
company or approved equivalent.

Supplying and fixing 8" long heavy duty solid brass tower bolt
P 10 inclusive of brass screws marketted by M.M.Noorbhoy & No. 1530.00
company or approved equivalent.

Supplying and fixing 10" long heavy duty solid brass tower bolt
P 11 inclusive of brass screws marketted by M.M.Noorbhoy & No. 1885.00
company or approved equivalent.

Engineering organization, W.P. Page 20 BSR 2010


ITEM DESCRIPTION UNIT RATE

Supplying and fixing solid brass Door or Window pull ring of 1"
P 12 No. 265.00
dia. ( Small )

Supplying and fixing solid brass Door or Window pull ring of 1


P 13 No. 300.00
1/4" dia. ( Medium )

Supplying and fixing solid brass Door or Window pull ring of 2"
P 14 No. 340.00
dia. ( Large )

P 15 Supplying and fixing solid brass fanlight catch. No. 935.00

Supply and fixing Stainless Steel hinges of size 102 x 76 x 2mm


P 16 of Union Brand & Model no.- X8203-BB-2 or approved Pair 2540.00
equivalent.
Supply and fixing Stainless Steel hinges of size 102 x 76 x 3mm
P 17 of Union Brand & Model no.- X8203-BB-3 or approved Pair 3070.00
equivalent.

Supply and fixing Stainless Steel hinges of size 127 x 89 x 3mm


P 18 of Union Brand & Model no.- X8205-BB-3 or approved Pair 2865.00
equivalent.
Supplying and fixing Night - latch lock of Union Brand & Model No. 7960.00
P 19 No. -1028 WEPL or approved equivalent.

Supplying and fixing Night - latch lock of Union Brand & Model No. 9425.00
P 20 No. -1022 SEPL or approved equivalent.

Supplying and fixing two lever Mortice door lock for single sash No. 4890.00
P 21 of Union Brand & Model no.-678.24.95 CH or approved
equivalent.
Supplying and fixing two lever Mortice door lock for double sash No. 5860.00
P 22 of Raniyo Brand & Model no.- 965.41.94 CH or approved
equivalent.

Supplying and fixing cylindrical door lock of Union Brand & No. 5030.00
P 23 Model no. -96300-SS.or approved equivalent

Supplying & fixing rim lock of Raniyo Brand & Model no. - No. 1820.00
P 24 1445 or approved equivalent.
Supplying & fixing hydraulic door closer of Union Brand & No. 6135.00
P 25 Model no. - 8823 SIL or approved equivalent.
Supplying & fixing stainless steel Male or Female Symbol of No. 1225.00
P 26 Union Brand & Model no. - 200SS or approved equivalent.
Supplying & fixing stainless steel Disabled Symbol of Union No. 1500.00
P 27 Brand or approved equivalent.
No.
P 28 Supplying and fixing mortice lock - Imported chinese 2025.00

P 29 Supplying and fixing Yale mortice lock - (Italy make) No. 2695.00

P 30 Supplying and fixing cupboard door lock - 808 No. 600.00

P 31 Supplying and fixing magnet lock No. 70.00

Engineering organization, W.P. Page 21 BSR 2010


ITEM DESCRIPTION UNIT RATE

P 32 Supplying and fixing 1" padlock No. 495.00

P 33 Supplying and fixing 1 1/2" padlock No. 585.00

P 34 Supplying and fixing 2" padlock No. 1035.00

P 35 Supplying and fixing hasp & staple No. 50.00

Q - ROOFING AND CEILING


Q 01 Roof covering with calicut pattern clay tiles. (Timber frame work Sqr. 7825.00
and ridge covering measured separately)

Q 02 Roof covering with corrugated asbestos sheets. (Timber frame Sqr. 6710.00
work and ridge covering measured separately)

Q 03 Asbestos close fitting ridges fixed complete with roofing screws L.ft. 180.00
or hook bolts.

Q 04 Ridging with calicut pattern tiles bedded in cement, lime & sand L.ft. 140.00
mortar 1:1:4 and coloured to match the tiles.

Q 05
One layer of half round tiles over existing corrugated sheets. Sqr. 16700.00
Q 06 3/4" x 6" wide tongued and grooved lunumidella ceiling boards Sqr. 13235.00
fixed to underside of existing rafters with brass screws including
leveling with timber strip where necessary.

Q 07 Asbestos eaves ceiling with Halmilla coves & fillets. Under side Sqr. 7360.00
to existing rafter size of fillet to be 1 1/2" x 1/2" size of cove
moulding 2" x 2"

Q 08
Supplying and Fixing finished size 4" x 2" Coconut Rafters. L.ft. 110.00
Q 09 Supplying and Fixing planned finished size 3 1/2 "x1 1/2" L.ft. 85.00
Coconut Rafters.

DSI TILES ( NIVASI PRODUCT )

Item Q10 - Q14 are using for the laying of DSI ( NIVSA Tiles
or approved equivelant as per the m/s Samson Rajarata Tiles
(pvt)ltd. Manufactures specifications.
Timber frame work sizes specified as follows.
a) Ridge plate - 45mm x 190mm
b) Wall plate - 117mm x 190mm
c) Rafters - 45mm x 117mm maximum lengh 10'-0" @ 18"
C/C
d) Reepers - 45mm x 25mm @ 10" C/C
Q 10 Roof covering with Natural type main tiles or approved Sqr. 19385.00
equivelant . (Specified Timber frame work and ridge covering
measured separately)
Q 11 Ridging with Natural type ridge tiles bedded in cement, sand L.ft. 265.00
mortar 1:5 and coloured to match the tiles.

Engineering organization, W.P. Page 22 BSR 2010


ITEM DESCRIPTION UNIT RATE

Q 12 Roof covering with Natural type gable left tiles or approved L.ft. 175.00
equivelant .
Q 13 Roof covering with Natural type gable right tiles or approved L.ft. 175.00
equivelant .
Q 14 Roof covering with Natural type corner tiles or approved L.ft. 180.00
equivelant .

Flashing
Q 15 Aluminium Valley gutter of 3'-0" wide in gauge 24 sheets L.ft. 1195.00
including 3/4" thk. Ginisapu timber boarding finished with two
coats of wood preservative.

Q 16 Aluminium flashing of 1'- 6" wide in gauge 24 sheets including L.ft. 960.00
3/4" thk. Ginisapu timber boarding finished with two coats of
wood preservative.

Q 17 Aluminium flashing of 1'-6" wide in gauge 24 sheets, bent to L.ft. 290.00


shape and fix to wall. (without timber boarding)

Q 18 G.I. Flashing 20 B.W.G. of 1'6" girth with end laps not less than L.ft. 390.00
6" , turned and tuck up not less 6" in wall and pointed in cement
motor 1:2

Q 19 G.I. Valley gutter of 3'-0" wide in gauge 18 sheets including 3/4" L.ft. 1400.00
thk. Ginisapu timber boarding including two coats of anti-
corrosive paint and wood preservative to sheet and boarding.
(Only to be specified when repairing an existing G.I. gutter)

Q 20 Zincalum flashing (0.47mm thick) and 1'6" wide bent to shape L.ft. 335.00
and fixed to wall (without timber coating)

Q 21 Zincalum Valley gutter of 3'-0" wide in 0.47mm thick sheets L.ft. 1290.00
including 3/4" thk. Ginisapu timber boarding including wood
preservative boarding.

Engineering organization, W.P. Page 23 BSR 2010


ITEM DESCRIPTION UNIT RATE

Roof Timber

Note :

During the past two years, Divisional Engineers have


reported that exact imperial sizes on the timber on
following categories are not readily available in the
market, unless logs are being purchased and sawn to
the exact size. Contractor's Association has also made
representation indicating that the imperial size specified
in the BSR is not available on imported timber
varieties, and due to scarcity of the local timber, small
scale Contractors are unable to purchase logs and
seasoned the timber and sawn to the imperial sizes.
Market survey has confirmed the same. Accordingly, it
has been decided to indicate the cross sectional size roof
timber in the following manner to be in par with
sectional sizes readly available in the local market, as it
may not be worthwhile to prescribe timber sizes and,
then request Contractors to by a large section and
produce it to the required size, since there is no
standardization of the timber imports. This has been
done to avoid subjective decision taken by the
Divisional Engineers during the project implementation
phase.
Accordingly, the following imperial sizes are being now
replaced by the following Metric sizes.
1" to be replaced by 22mm
2” to be replaced by 45mm
3” to be replaced by 70mm
4” to be replaced by 94mm
5” to be replaced by 117mm
6” to be replaced by 140mm
7” to be replaced by 165mm
8” to be replaced by 190mm.

Hence, timber will now be prescribed as


2"x 1" as 45mmx22mm
2”x 2” as 45mm x 45mm
4”x 2” as 94mm x 45mm
5”x 2” as 117mm x 45mm
5”x 3” as 117mm x 70mm
4”x 3” as 94mm x 70mm
6”x 2” as 140mm x 94mm
6”x 3” as 140mm x 70mm
6”x 4” as 140mm x 94mm
8”x 4” as 190mm x 94mm

Refer preamble note for approved timber species. The rate for
timber items will remain same irrespective of timber species.

Engineering organization, W.P. Page 24 BSR 2010


ITEM DESCRIPTION UNIT RATE

Q 22 Roof with calicut pattern tiles on local Micro (Eucalyptus Sqr. 29740.00
Microcoris) or Balau , Bitis or Kempas timber frame work
complete with ridge hips etc. comprising of 165mm x 45mm ridge
plate , 94mm x 70mm wall plate , 94mm x 45mm rafters @ 18"
c/c and 45mm x 22mm reepers @ 12" c/c. Rate shall include for
applying of wood preservative.

Q 23 Roofing with asbestos corrugated sheets on local Micro Sqr. 17815.00


(Eucalyptus Microcoris) or Balau , Bitis, or Kempas timber
frame work (Ridging measured separately).Comprising of 165mm
x 45mm ridge plate , 94mm x 70mm wall plate , 94mm x 45mm
rafters @ 30" c/c and 45mm x 45mm battens @ 3'-0" c/c.Rate
shall include for applying of wood preservative.

Q 24 Supply and installation of Zn/Alum profile sheets of total Sqr. 34945.00


thickness 0.47mm , fixed to the roof timber frame work
comprising of 140mm x 45mm hip rafters/valley rafters, 94mm x
70mm wall plates, 117mm x 94mm purling , 94mm x 45mm
rafters @ 2'-0" spacing and 45mm x 22mm reepers @ 3'-6"
spacing including ridge capping , end capping and other
accessories required to complete the roof to working order.
(Ceiling and thermal installation measured separately.) Rate shall
include for routing , planing and sand papering hip/valley rafters,
purlings and rafters and application of waterbased stain and two
coats of water based sealants. Rate shall include for applying of
wood preservative.

Q 25 Asbestos flat ceiling fixed with coves & fillets to local Micro Sqr. 21260.00
(Eucalyptus Microcoris) or Balau , Bitis or Kempas timber frame
work of 94mm x 45mm @ 4' - 0" c/c , 45mm x 45mm @ 2' - 0"
c/c, fillet size to be 1 1/2" x 1/2" and cove moulding size to be 2"
x 2". Rate shall include for applying of wood preservative.

Q 26 Asbestos flat eaves ceiling fixed with coves and fillets to local Sqr. 13725.00
Micro (Eucalyptus Microcoris) timber work. or Balau , Bitis or
Kempas.fillet size to be 1 1/2" x 1/2" cove moulding size to be 2"
x 2". Rate shall include for applying of wood preservative.

Q 27 3/4" thick x 6" wide tongued and grooved lunumidella ceiling Sqr. 21665.00
boards fixed flat on 94mm x 45mm local Micro (Eucalyptus
Microcoris) or Balau , Bitis or Kempas.and timber joist at every
2' - 0" c/c. cove moulding size to be 2" x 2". Rate shall include
for applying of wood preservative.
Q 28 Supply and installation of tongued and grooved 3/4" x 6" Sqr. 33400.00
lunumidella ceiling planks on top of rafters , with double sided
aluminium foil fixed on top. Rate shall include for sand papering
and smoothing one side of the planks , application of water based
staining and two coats of water based sealant. Rate shall include
for applying of wood preservative.

Engineering organization, W.P. Page 25 BSR 2010


ITEM DESCRIPTION UNIT RATE

Q 29 Supplying and fixing 190mm x 94mm , 165mm x 45mm , 140mm Cu.ft. 5150.00
x 94mm , 140mm x 70mm , 140mm x 45mm , 117mm x 190mm
and 45mm x 190mm local micro or Balau , Kempas or Bitis
timber purling , hip/valley rafters etc. with applying of wood
preservative.
Q 30 Supplying and fixing 117mm x 70mm purling up to 12'-0" length L.ft. 320.00
Balau, Kempas , Micro. with applying of wood preservative.

Q 31 Supplying and fixing 94mm x 70mm wall plates up to 12'-0" L.ft. 270.00
length, Balue, Kempas, Micro. with applying of wood
preservative.
Q 32 Supplying and fixing 117mm x 70mm , 117mm x 45mm , 94mm Cu.ft. 3800.00
x 70mm local Micro (Eucalyptus Microcoris) Balau , Bitis
,Kempas timber purlins, wall plates, rafters etc. with applying of
wood preservative.
Q 33 Supplying and fixing 94mm x 45mm local Micro (Eucalyptus L.ft. 195.00
Microcoris) or Balau Kempas or Bitis timber purling, rafters etc.
with applying of wood preservative.
Q 34 Supplying and fixing 45mm x 45mm local Micro (Eucalyptus L.ft. 86.00
Microcoris) or Balau, Kempas or Bitis timber bearers. with
applying of wood preservative.
Q 35 Supplying and fixing 45mm x 22mmlocal micro (Eucalyptus L.ft. 50.00
Microcoris)or Balau, Kempas or Bitis. timber reapers with
applying of wood preservative.
Q 36 Timber valance/barge board in GINISAPU timber finished size 9" L.ft. 195.00
x 3/4" thick fixed to roof frame with brass screws and applying of
wood preservative.
Q 37 Pressure treatment of timber at an approved kiln including Cu.ft. 390.00
transport charges

Q 38 Applying two coats of wood preservative (Clear) to wood work. Sqr. 790.00

Q 39 Supply and fixing 3/4"x 1/4"x12" long flat iron bracket for fixing No. 160.00
valance board/barge board. Rate shall include for two coats of
anti-corrosive paint.

R - GUTTERS AND DOWN PIPES


R 01 P.V.C. eaves gutter 4 1/2" square type fixed to valance board L.ft. 180.00
with P.V.C. brackets @ 1' - 6" c/c including necessary mitre
joints , gutter joiners , running heads & end caps.

R 02 P.V.C. down pipes 3 1/2" dia. fixed to wall with P.V.C. clips @ L.ft. 140.00
4'-0" c/c including necessary sockets, bends, elbows.

Engineering organization, W.P. Page 26 BSR 2010


ITEM DESCRIPTION UNIT RATE

S - SANITARY FITTINGS

Note :

In view of the variety of sanitary ware and fittings available in


the market, it has become necessary to prescribe the exact
quality requirements in terms of performance and durability
1
aspects. The "Rocell & American Standard" brands and
respective model numbers have been chosen as a bench mark
to establish the said requirements.

The brand name and model number appearing in the


respective BSR items are purely meant to describe the
performance standard of the said fitting/item and does not
2
imply in any model that only the "Rocell & American
Standard" brands are recommended or considered to be
restricted to the "Rocell & American Standard" brands.

Any other make/brand that has equivalent performance


3 characteristics are considered as equivalent provided such
fittings met with following criteria.

(a) Has an authorized local agent in Sri Lanka

The local agent has been in the trade of the offered make for
(b)
not less than 5 years.

The offered sanitary fittings has a 10 Year manufacturer's


(c)
warranty issued by the agent.

The cistern mechanism shall have an assurance for the


(d)
availability of spares for the next 3 years.

The fittings are manufactured in conformity to BS, JIS,


(e)
A.S.T.M., A.S. or S.L.S. standards.

The dimensions are and performance characteristics are in


(f)
par with the stated model.

The brands that may be considered as equivalent are "Ideal"


4 brand, or "Twyford" brand or any other approved make
which prior approval to be obtained.
5 (a) In case where wash basin outlet directly falls on to an open
drain, the bottle trap may be omitted.
5 (b) For wash basins fixed on open areas plastic tap of item T 07
be specified.

Engineering organization, W.P. Page 27 BSR 2010


ITEM DESCRIPTION UNIT RATE

Normal Range
S 01 Supply and fix white vitreous china floor standing wash basin and No. 14170.00
pedestal with overflow hole and single tap hole in center of
"Rocell" brand & model "Urban D" or approved equivalent
complete to working order inclusive of the 1 1/4" chromium
plated waste outlet of "Rocell" brand & model "A706" and 1
1/4" chromium plated siphon cleanable bottale trap of "Rocell"
brand & model "A186".

S 02 Supply and fix white vitreous china floor standing close coupled No. 17230.00
semi back to wall water closet suite with wash down flushing with
6/3 liters dual flushing has horizontal outlet with vario drain bend
and two lateral holes for bottom water connection , cistern with
water inlet from rear of "Rocell" brand & model "Urban D" or
approved equivalent complete to working order inclusive of
universal bend of "Rocell" brand & model "Vario Joint".

S 03 Supply and fix Chromium plated piller tap for wash basin only No. 2530.00
cold water of "American Standard" brand model No.
4604.415.50 or approved equivalent.

S 04 Supply and fix Chromium plated single level wash basin mixer No. 6750.00
tap without pop-up waste with connection flex of "Rocell" brand
model No.Duca - 16495 or approved equivalent with 5 year
written warranty from the authorized agent.

Semi - Luxuary Range


S 05 Supply and fix white vitreous china floor standing wash basin and No. 15795.00
pedestal with overflow hole and single tap hole in center of
"Rocell" brand & model "Dune" or approved equivalent
complete to working order inclusive of the 1 1/4" chromium
plated waste outlet of "Rocell" brand & model "A706" and 1
1/4" chromium plated siphon cleanable bottale trap of "Rocell"
brand & model "A186".

S 06 Supply and fix white vitreous china floor standing close coupled No. 20580.00
semi back to wall water closet suite with wash down flushing with
6/3 liters dual flushing has horizontal outlet with vario drain bend
and two lateral holes for bottom water connection , cistern with
water inlet from rear of "Rocell" brand & model "Dune" or
approved equivalent complete to working order inclusive of
universal bend of "Rocell" brand & model "Vario Joint".

S 07 Supply and fix Chromium plated piller tap for wash basin only No. 2530.00
cold water of "American Standard" brand model No.
4604.415.50 or approved equivalent.

S 08 Supply and fix Chromium plated single level wash basin mixer No. 6750.00
tap without pop-up waste with connection flex of "Rocell" brand
model No.Duca - 16495 or approved equivalent with 5 year
written warranty from the authorized agent.

Engineering organization, W.P. Page 28 BSR 2010


ITEM DESCRIPTION UNIT RATE

Luxuary Range
S 09 Supply and fix white vitreous china floor standing wash basin and No. 24785.00
pedestal with overflow hole and single tap hole in center of
"Rocell" brand & model "Intense" or approved equivalent
complete to working order inclusive of the 1 1/4" chromium
plated waste outlet of "Rocell" brand & model "A706" and 1
1/4" chromium plated siphon cleanable bottale trap of "Rocell"
brand & model "A186".

S 10 Supply and fix white vitreous china floor standing close coupled No. 31690.00
semi back to wall water closet suite with wash down flushing with
6/3 liters dual flushing has horizontal outlet with vario drain bend
and two lateral holes for bottom water connection , cistern with
water inlet from rear of "Rocell" brand & model "Intense" or
approved equivalent complete to working order inclusive of
universal bend of "Rocell" brand & model "Vario Joint".

S 11 Supply and fix white vitreous china floor standing Bidet with No. 17315.00
overflow hole of "Rocell" brand & model "Intense" or approved
equivalent complete to working order.

S 12 Supply and fix Chromium plated piller tap for wash basin only No. 12050.00
cold water of "American Standard" brand model No.A-1500N or
approved equivalent.

S 13 Supply and fix Chromium plated single level wash basin mixer No. 17820.00
tap with pop-up waste with connection flex of "Rocell" brand
model No.Sprint - 29500 or approved equivalent with 5 year
written warranty from the authorized agent.

Other Fittings for Normal / Semi-Luxury / Luxury


S 14 Supply and fix wall hung wash basin with half pedestal and single No. 20520.00
tap hole in center of "Rocell" brand model No."Dew Point" or
approved equivalent complete to working order.

S 15 Supply and fix wall hung ceramic corner wash basin of No. 6945.00
"American Standard " brand, model New Codie TF 0940 or
approved equivalent complete to working order.Rate inclusive of
brackets and connection to pipe line, but without tap and bottle
trap.

S 16 Supply and installation of vanity type wash basin of "American No. 6355.00
Standard " brand, model Ceros - TF0477 with A-8006 waste &
plug or approved equivalent. On concrete vanity slab finished
with 3/4" thick approved polished granite tile in black colour. (
Vanity top concrete slab & Granite tile laying measured
separatly.)

S 17 Supply and fix squatting pan with foot rest of "Rocell" brand No. 3545.00
model No. SP3F013 or approved equivalent.

Engineering organization, W.P. Page 29 BSR 2010


ITEM DESCRIPTION UNIT RATE

S 18 Supply and fix low level plastic cistern for squatting pan of No. 3470.00
"Rocell" brand or approved equivalent including connecting pipe
between tank and squatting pan.

S 19 Supply and fix ceramic urinal with flush valve of "Rocell" brand No. 17230.00
model DP70013 or approved equivalent complete to working
order.

S 20 Supply and fix Chromium plated 1 1/4" dia.siphon cleanable No. 5045.00
bottale trap of "Rocell" brand model No.A186 or approved
equivalent.

S 21 Supply and fix Chromium plated 1/2" dia. angle valve brass No. 1425.00
fitting with zink head of "Rocell" brand model No.A280 or
approved equivalent.

S 22 Supply and fix hand held chromium plated bidet spray of No. 4945.00
"American Standard " brand model A4700 or approved
equivalent.

S 23 Supply and fix Chromium plated 4 function shower head of No. 10275.00
"American Standard" brand model No. A-6080 with shower arm
of "American Standard" brand model No. A-6110-974-845 &
concealed valve of "American Standard" brand model No. A-
7002C-B JAZZ or approved equivalent for cold water.

S 24 Supply and fix Chromium plated hand shower of "American No. 15400.00
Standard" brand model No. A-2003-A-MR with adjustable
shower rod with soap tray of "American Standard" brand model
No. Viola 11 - A-6110-978-777 & angle valve of "American
Standard" brand model No. 9113.005.50 or approved equivalent
for cold water.

S 25 Supply and fix Chromium plated shower level built-in-shower No. 9015.00
mixer with auto diverter shower arm jointed shower head of
"Rocell" brand model No.Pony Z - Z6955 or approved
equivalent.

S 26 Supply and fix Chromium plated shower mixer of "American No. 13070.00
Standard" brand model No. Saga - 1512.701.50 with adjustable
shower rod of "American Standard" brand model No. Viola 11 -
A-6110-978-777 or approved equivalent.

S 27 Supply and fix service sink (Lab sink) of "American Standard " No. 14115.00
brand, model TF-8124 with A-8006 waste & plug or approved
equivalent for the school building complete to working order.

S 28 Supply and fix fully chemical resistant laboratory sink of No. 105810.00
"American Standard " brand, model Larch - S594501 or
approved equivalent specially for the operating theatres.

S 29 Supply and fix brass chromium plated elbow operated pillar tap No. 5765.00
for the operating theatres of "American Standard " brand, model
ML30 or approved equivalent.

Engineering organization, W.P. Page 30 BSR 2010


ITEM DESCRIPTION UNIT RATE

S 30 Supply and fix automatic hand dryer of "American Standard " No. 19750.00
brand, model Kingsway - HK1800PA or approved equivalent
including electrical connection.

S 31 Supply and fix 5mm thick mirror of size 18" x 24" double coated No. 2465.00
with pencelage back strecher.

Bathroom Accessories
S 32 Supply and fix chromium plated Soap Basket of "Rocell" brand No. 3270.00
& model "Charming" or approved equivalent. (Normal & Semi-
luxuary range )

S 33 Supply and fix chromium plated brass body and galss Soap Dish No. 2105.00
of "Rocell" brand & model "Charming" - DP 6703 or approved
equivalent. ( Luxuary range )

S 34 Supply and fix chromium plated brass body and galss Tumbler No. 2105.00
Holder of "Rocell" brand & model "Charming" or approved
equivalent.
S 35 Supply and fix chromium plated Towel Ring of "Rocell" brand No. 2035.00
& model "Charming" or approved equivalent.

S 36 Supply and fix chromium plated Robe Hook of "Rocell" brand & No. 1345.00
model "Charming" or approved equivalent.

S 37 Supply and fix chromium plated Toilet Paper Holder of "Rocell" No. 3075.00
brand & model "Charming" or approved equivalent.

S 38 Supply and fix chromium plated Toilet Cup Holder of "Rocell" No. 3395.00
brand & model "Charming" or approved equivalent.

S 39 Supply and fix chromium plated 600mm long Single Towel Bar No. 3770.00
of "Rocell" brand & model "Charming" or approved equivalent.

S 40 Supply and fix chromium plated 600mm long Double Towel Bars No. 4615.00
of "Rocell" brand & model "Charming" or approved equivalent.

S 41 Supply and fix chromium plated 600mm long Towel Rack of No. 8600.00
"Rocell" brand & model "Charming" or approved equivalent.

S 42 Supply and fix chromium plated brass body 450mm long Glass No. 3310.00
Shelf of "Rocell" brand & model "Charming" or approved
equivalent.

Disable Fittings & Accessories


S 43 Supply and fix ceramic wall hung wash basin for disabled of No. 7340.00
"American Standard " brand, model Kimera - TF995 with waste
& plug A-8006 or approved equivalent.

Engineering organization, W.P. Page 31 BSR 2010


ITEM DESCRIPTION UNIT RATE

S 44 Supply and fix white ceramic water closet suite for the disabled of No. 25965.00
"American Standard" brand & model Ventura - 3200.001.09 ,
Cygnet tank - PP.4041.020.03C and Seat and cover - 390000N
or approved equivalent complete to working order.

S 45 Supply and fix hand grip rails for disabled of "American No. 15340.00
Standard " brand, model Me-tu -MTJT26 or approved equivalent.

S 46 Supply and fix grip bar for disabled of "American Standard " No. 2435.00
brand, model Apex - AR-065-18 S/S or approved equivalent.

S 47 Supply and fix hand grip-shower angle for disabled of "American No. 14460.00
Standard " brand, model Me-tu - MTJT22-5 or approved
equivalent.

S 48 Supply and fix hand grip-shower for disabled of "American No. 14460.00
Standard " brand, model Me-tu - MTJT22-10 or approved
equivalent.

Indian & Malasian Origins


S 49 Supply and fix footrest squatting pan and trap including laying No. 2560.00
flush pipe laid on concrete base. (Indian Origin)

S 50 Supply and fix ceramic urinal bowl with trap fixed to wall as No. 2800.00
directed with inlet and outlet connection. (Indian Origin )

S 51 Supply and fix wash basin with pedestal model no.BSWBA No. 7180.00
620x470 VCP - manufactured by Mascon or equivalant complete
to work in order. Rate without pillar tap & bottle trap.

S 52 Supply and fix wall hung corner wash basin model No. 1545.00
no.BSWBA16x16CC manufactured by Mascon or equivalant
complete to work in order. Rate inclusive of brackets and
connection to pipe line, but without pillar tap & bottle trap.

S 53 Supply and fix wash basin only with steel brackets including 1/2" No. 5375.00
angle valve and 1/2" pillar tap marketed by M/s. "Rajabdeen" or
approved equivalent. ( Indian Origin )

S 54 Supply and fix low level water closet with cistern of Indian Origin No. 8100.00
with angle valve, "P" or "S" trap, all complete to working order. (
Indian Origin )

S 55 High-level plastic cistern supplied and fixed to wall rawl plug & No. 4315.00
screws complete with P.V.C. flush pipe, stop cock, water supply
connection etc. (Malaysian make)

S 56 Supply and fix 36" x 18" stainless steel kitchen sink with single No. 4470.00
bowl & single drain of "Sealcore" by mascons or approved
equivelant with 5 year written warranty from the authorized
agent. including PVC bottle trap and water connection with
flexible hose, all complete to working order. ( Swan neck tap paid
separately.)

Engineering organization, W.P. Page 32 BSR 2010


ITEM DESCRIPTION UNIT RATE

S 57 Supply and fix 17" x 18" stainless steel kitchen sink with single No. 3535.00
bowl of "Sealcore" by mascons or approved equivelant with 5
year written warranty from the authorized agent. including PVC
bottle trap and water connection with flexible hose, all complete
to working order. ( Swan neck tap paid separately.)
S 58 Supplying and fixing 1 1/4" (40 mm) dia. PVC Bottle Trap. No. 415.00
(Malaysian make )

S 59 Shower rose chromium plated 4" dia. Fixed vertically with 1/2" No. 885.00
valve socket including water connection.

S 60
Supply and fixing plastic seat cover No. 820.00
S 61 Mirror bevelled rectangular 20"x 15" with hard wood back 3/4" No. 2240.00
thickness finished with 2 coats of enamel paint. Aluminium clips
and key hole hanging plate including glass shelves.

T - PLUMBING

Note:

All P.V.C. pipes should confirm to S.L.S. 147


T 01 Supplying laying and/or fixing 1/2" dia. P.V.C. pipes Type L.ft. 46.00
1000 (Specials paid separately).

T 02 Supplying laying and/or fixing 3/4" dia. P.V.C. pipes Type L.ft. 72.00
1000 (Specials paid separately).

T 03 Supplying laying and/or fixing 1" dia. P.V.C. pipes Type 1000 L.ft. 84.00
(Specials paid separately).

T 04 Supplying laying and/or fixing 1 1/4" dia. P.V.C. pipes Type L.ft. 106.00
1000 (Specials paid separately).

T 05 Supplying laying and/or fixing 1 1/2" dia. P.V.C. pipes Type L.ft. 146.00
1000 (Specials paid separately).

T 06 Supplying laying and/or fixing 2" dia. P.V.C. pipes Type 1000 L.ft. 232.00
(Specials paid separately).

"Water - Tec" Brand or Approved Equivalent Fittings (


T 07 - T 12 )

T 07 Supplying and fixing 1/2" Bib tap No. 300.00

T 08 Supplying and fixing 1/2" Angle valve No. 295.00

T 09 Supplying and fixing 1/2" Pillar Sink tap.(Swan-neck) No. 920.00

T 10 Supplying and fixing 1/2" Wall Sink tap. No. 990.00

T 11 Supplying and fixing Health foucet.(Bidet Spray) No. 550.00

T 12 Supplying and fixing Shower rose No. 575.00

Engineering organization, W.P. Page 33 BSR 2010


ITEM DESCRIPTION UNIT RATE

"Plumber" Brand or Approved Equivalent Fittings (


T 13 -T17 )

T 13 Supply and fixing 1/2" dia. chromium plated Concealed stop cock No. 1600.00
of "Plumber" brand & model no: NCE-0405 or approved
equivalent.

T 14 Supply and fixing 1/2" dia. chromium plated Angle cock of No. 925.00
"Plumber" brand & model no: NCE-0507 or approved equivalent.

T 15 Supply and fixing 1/2" dia. chromium plated Pillar cock , foam No. 1580.00
flow of "Plumber" brand & model no : NCE-0101 or approved
equivalent.

T 16 Supply and fixing 1/2" dia. chromium plated Bib cock , foam No. 1335.00
flow of "Plumber" brand & model no : NCE-0202 or approved
equivalent.

T 17 Supply and fixing 1/2" dia. chromium plated Sink cock with No. 3400.00
swivel spout deck mounted, foam flow of "Plumber" brand &
model no : NCE-0202 or approved equivalent. (Swan-neck Type)

T 18
Supplying and fixing 1/2" stop cock. No. 535.00
T 19
Supplying and fixing 3/4" stop cock. No. 860.00
T 20 Supplying and fixing 1" wheel valve "Pegler" Brand or
No. 1640.00
approved equivalent.
T 21 Supplying and fixing 1 1/2" wheel valve "Pegler" Brand or
No. 2180.00
approved equivalent.
T 22 Supplying and fixing 2" wheel valve "Pegler" Brand or
No. 5675.00
approved equivalent.
T 23
Supplying and fixing 1/2" Handle valve No. 585.00
T 24
Supplying and fixing 3/4" Handle valve No. 910.00
T 25 Supply and fixing 1" dia Brass Ball valve "Pegler" Brand or
No. 1770.00
approved equivalent.
T 26 Supply and fixing 3/4" dia Brass Ball valve "Pegler" Brand or
No. 1215.00
approved equivalent.
T 27 Supply and fixing 1/2" dia Brass Ball valve "Pegler" Brand or
No. 710.00
approved equivalent.
T 28
Supply and fixing 1" dia PVC Compact Ball valve. No. 375.00
T 29
Supply and fixing 3/4" dia PVC Compact Ball valve. No. 355.00
T 30
Supply and fixing 1/2" dia PVC Compact Ball valve. No. 240.00
T 31
Supply and fixing 1/2" dia PVC Union. No. 210.00

Engineering organization, W.P. Page 34 BSR 2010


ITEM DESCRIPTION UNIT RATE

T 32
Supply and fixing 1" dia PVC Union. No. 230.00
T 33 Supplying and laying 4" dia.P.V.C. sewer pipes (type 600) L.ft. 885.00
Including cement concrete surrounding 1:3:6: ( 1") as per Drg.
No:- WSS 270 - Type I . Excavation paid separately.

T 34 Supplying and laying 6" dia.P.V.C. sewer pipes (type 600) L.ft. 1520.00
Including cement concrete surrounding 1:3:6: ( 1") as per Drg.
No:- WSS 270 - Type II . Excavation paid separately.

T 35 Supplying and laying 4" dia.P.V.C. sewer pipes (type 600) fixed L.ft. 585.00
to wall and floor slab with clips.

T 36 Supplying and laying 6" dia. P.V.C. sewer pipes (type 600) fixed L.ft. 1100.00
to wall and floor slab with clips.

T 37
Supplying and Fixing 1 1/4" dia P.V.C. waste pipe (type 600) L.ft. 95.00
T 38
Supplying and fixing 1 1/2" dia P.V.C. waste pipe (type 600) L.ft. 115.00
T 39
Supplying and fixing 2" dia. P.V.C waste pipe (type 600) L.ft. 165.00
T 40
Supplying and fixing 4" dia. P.V.C waste pipe (type 600) L.ft. 500.00
T 41 Supplying and installing "Plastishell" or any other water tank 500 No. 8600.00
Ltr. capacity (fittings paid separately) at an average height of 12'-
0". Tank shall have a 5 year warranty from the manufracture.

T 42 Supplying and installing "Plastishell" or any other water tank No. 15900.00
1000 Ltr. capacity (fittings paid separately) at an average height
of 12'-0". Tank shall have a 5 year warranty from the
manufracture.

T 43 Supplying and installing 2000 ltr. "Plastishell" or any other water No. 27100.00
tank at average 12 ft. height including transporting and hoisting
in position Tank shall have a 5 year warranty from the
manufracture.

T 44 Supplying and installing 5000 ltr. "Plastishell" or any other water No. 63980.00
tank at average 12 ft. height including transporting and hoisting
in position Tank shall have a 5 year warranty from the
manufracture.

T 45 Supplying and fixing 1/2" dia PVC Socket No. 43.00

T 46 Supplying and fixing 1/2" dia. PVC Valve Socket No. 47.00

T 47 Supplying and fixing 1/2" dia. PVC Faucet Socket No. 47.00

T 48 Supplying and fixing 1/2" dia. PVC Elbow No. 42.00

T 49 Supplying and fixing 1/2" dia. PVC Bend No. 54.00

T 50 Supplying and fixing 1/2" dia. PVC Equal Tee No. 47.00

Engineering organization, W.P. Page 35 BSR 2010


ITEM DESCRIPTION UNIT RATE

T 51 Supplying and fixing 1/2" dia. PVC Clips No. 21.00

T 52 Supplying and fixing 3/4" dia PVC Socket No. 52.00

T 53 Supplying and fixing 3/4" dia. PVC Valve Socket No. 57.00

T 54 Supplying and fixing 3/4" dia. PVC Faucet Socket No. 57.00

T 55 Supplying and fixing 3/4" dia. PVC Elbow No. 57.00

T 56 Supplying and fixing 3/4" dia. PVC Bend No. 65.00

T 57 Supplying and fixing 3/4" dia. PVC Equal Tee No. 65.00

T 58 Supplying and fixing 3/4" dia. PVC Clips No. 27.00

T 59 Supplying and fixing 1" dia PVC Socket No. 66.00

T 60 Supplying and fixing 1" dia. PVC Valve Socket No. 64.00

T 61 Supplying and fixing 1" dia. PVC Faucet Socket No. 67.00

T 62 Supplying and fixing 1" dia. PVC Elbow No. 72.00

T 63 Supplying and fixing 1" dia. PVC Bend No. 83.00

T 64 Supplying and fixing 1" dia. PVC Equal Tee No. 88.00

T 65 Supplying and fixing 1" dia. PVC Clips No. 28.00

T 66 Supplying and fixing 1 1/4" dia PVC Socket No. 87.00

T 67 Supplying and fixing 1 1/4" dia. PVC Valve Socket No. 96.00

T 68 Supplying and fixing 1 1/4" dia. PVC Faucet Socket No. 104.00

T 69 Supplying and fixing 1 1/4" dia. PVC Elbow No. 103.00

T 70 Supplying and fixing 1 1/4" dia. PVC Bend No. 150.00

T 71 Supplying and fixing 1 1/4" dia. PVC Equal Tee No. 125.00

T 72 Supplying and fixing 1 1/4" dia. PVC Clips No. 30.00

T 73 Supplying and fixing 1 1/2" dia PVC Socket No. 123.00

T 74 Supplying and fixing 1 1/2" dia. PVC Valve Socket No. 126.00

T 75 Supplying and fixing 1 1/2" dia. PVC Faucet Socket No. 136.00

T 76 Supplying and fixing 1 1/2" dia. PVC Elbow No. 157.00

T 77 Supplying and fixing 1 1/2" dia. PVC Bend No. 228.00

Engineering organization, W.P. Page 36 BSR 2010


ITEM DESCRIPTION UNIT RATE

T 78 Supplying and fixing 1 1/2" dia. PVC Equal Tee No. 205.00

T 79 Supplying and fixing 1 1/2" dia. PVC Clips No. 36.00

T 80 Supplying and fixing 2" dia PVC Socket No. 177.00

T 81 Supplying and fixing 2" dia. PVC Valve Socket No. 190.00

T 82 Supplying and fixing 2" dia. PVC Faucet Socket No. 195.00

T 83 Supplying and fixing 2" dia. PVC Elbow No. 243.00

T 84 Supplying and fixing 2" dia. PVC Bend No. 395.00

T 85 Supplying and fixing 2" dia. PVC Equal Tee No. 297.00

T 86 Supplying and fixing 2" dia. PVC Clips No. 38.00

T 87 Supplying and fixing 2 1/2" dia PVC Socket No. 378.00

T 88 Supplying and fixing 2 1/2" dia. PVC Valve Socket No. 1125.00

T 89 Supplying and fixing 2 1/2" dia. PVC Faucet Socket No. 356.00

T 90 Supplying and fixing 2 1/2" dia. PVC Elbow No. 795.00

T 91 Supplying and fixing 2 1/2" dia. PVC Bend No. 925.00

T 92 Supplying and fixing 2 1/2" dia. PVC Equal Tee No. 1015.00

T 93 Supplying and fixing 2 1/2" dia. PVC Clips No. 41.00

T 94 Supplying and fixing 3" dia PVC Socket No. 540.00

T 95 Supplying and fixing 3" dia. PVC Valve Socket No. 1150.00

T 96 Supplying and fixing 3" dia. PVC Faucet Socket No. 645.00

T 97 Supplying and fixing 3" dia. PVC Elbow No. 1425.00

T 98 Supplying and fixing 3" dia. PVC Bend No. 1520.00

T 99 Supplying and fixing 3" dia. PVC Equal Tee No. 1720.00

T 100 Supplying and fixing 3" dia. PVC Clips No. 94.00

T 101 Supplying and fixing 2" - 1 1/2" dia. PVC. Reducing Socket No. 151.00

T 102 Supplying and fixing 2" - 1 1/4" dia. PVC. Reducing Socket No. 147.00

T 103 Supplying and fixing 2" - 1" 1/2 dia. PVC. Reducing Socket No. 143.00

T 104 Supplying and fixing 2" - 3/4" 2 dia. PVC. Reducing Socket No. 139.00

Engineering organization, W.P. Page 37 BSR 2010


ITEM DESCRIPTION UNIT RATE

T 105 Supplying and fixing 2" - 1/2" 2 dia. PVC. Reducing Socket No. 135.00

T 106 Supplying and fixing 1 1/2" - 1 1/4" dia. PVC. Reducing Socket No. 118.00

T 107 Supplying and fixing 1 1/2" - 1" 1/2 dia. PVC. Reducing Socket No. 115.00

T 108 Supplying and fixing 1 1/2" - 3/4" 2 dia. PVC. Reducing Socket No. 101.00

T 109 Supplying and fixing 1 1/2" - 1/2" 2 dia. PVC. Reducing Socket No. 93.00

T 110 Supplying and fixing 1 1/4" - 1" 1/2 dia. PVC. Reducing Socket No. 90.00

T 111 Supplying and fixing 1 1/4" - 3/4" 2 dia. PVC. Reducing Socket No. 83.00

T 112 Supplying and fixing 1 1/4" - 1/2" 2 dia. PVC. Reducing Socket No. 76.00

T 113 Supplying and fixing 1" - 3/4" 2 dia. PVC. Reducing Socket No. 66.00

T 114 Supplying and fixing 1" - 1/2" 2 dia. PVC. Reducing Socket No. 59.00

T 115 Supplying and fixing 3/4" - 1/2" dia. PVC. Reducing Socket No. 52.00

T 116 Supplying and fixing 2" - 1 1/2" dia. PVC. Reducing Tee. No. 290.00

T 117 Supplying and fixing 2" - 1 1/4" dia. PVC. Reducing Tee. No. 282.00

T 118 Supplying and fixing 2" - 1" 1/2 dia. PVC. Reducing Tee. No. 280.00

T 119 Supplying and fixing 2" - 3/4" 2 dia. PVC. Reducing Tee. No. 279.00

T 120 Supplying and fixing 2" - 1/2" 2 dia. PVC. Reducing Tee. No. 270.00

T 121 Supplying and fixing 1 1/2" - 1 1/4" dia. PVC. Reducing Tee. No. 184.00

T 122 Supplying and fixing 1 1/2" - 1" 1/2 dia. PVC. Reducing Tee. No. 165.00

T 123 Supplying and fixing 1 1/2" - 3/4" 2 dia. PVC. Reducing Tee. No. 156.00

T 124 Supplying and fixing 1 1/2" - 1/2" 2 dia. PVC. Reducing Tee. No. 138.00

T 125 Supplying and fixing 1 1/4" - 1" 1/2 dia. PVC. Reducing Tee. No. 125.00

T 126 Supplying and fixing 1 1/4" - 3/4" 2 dia. PVC. Reducing Tee. No. 120.00

T 127 Supplying and fixing 1 1/4" - 1/2" 2 dia. PVC. Reducing Tee. No. 99.00

T 128 Supplying and fixing 1" - 3/4" 2 dia. PVC. Reducing Tee. No. 89.00

T 129 Supplying and fixing 1" - 1/2" 2 dia. PVC. Reducing Tee. No. 83.00

T 130 Supplying and fixing 3/4" - 1/2" dia. PVC. Reducing Tee. No. 70.00
Supplying and fixing 1" - 3/4" 2 dia. PVC. Reducing Foucet
T 131 No. 90.00
Tee.

Engineering organization, W.P. Page 38 BSR 2010


ITEM DESCRIPTION UNIT RATE

Supplying and fixing 1" - 1/2" 2 dia. PVC. Reducing Foucet


T 132 No. 76.00
Tee.
Supplying and fixing 3/4" - 1/2" dia. PVC. Reducing Foucet
T 133 No. 78.00
Tee.
T 134 Supplying and fixing 1" - 3/4" 2 dia. PVC. Reducing Elbow. No. 84.00

T 135 Supplying and fixing 1" - 1/2" 2 dia. PVC. Reducing Elbow. No. 78.00

T 136 Supplying and fixing 3/4" - 1/2" dia. PVC. Reducing Elbow. No. 75.00

T 137 Supply and fixing 1/2" dia flexible hose - 12" length. No. 480.00

T 138 Supply and fixing 1/2" dia flexible hose - 18" length. No. 555.00

Special Pipe fittings

All Special Pipe fittings should be "Anton" Brand or


approved equivalent.

T 139 Supplying and fixing 4" (110 mm) dia. Double access branch No. 1555.00
with cleaning eye.

T 140 Supplying and fixing 4" (110 mm) dia Single access branch with No. 1085.00
cleaning eye.

T 141 Supplying and fixing 4" (110 mm) dia single branch. No. 920.00
T 142 Supplying and fixing 4" (110 mm) dia Swept bend with cleaning No. 1005.00
eye.

T 143 Supplying and fixing 4" (110 mm) dia Swept bend. No. 1000.00
T 144 Supplying and fixing 4" (110 mm) dia Swept tee with cleaning No. 1140.00
eye.

T 145 Supplying and fixing 4" (110 mm) dia Swept tee. No. 735.00

T 146 Supplying and fixing 4" (110 mm) dia " P " trap. No. 970.00

T 147 Supplying and fixing 4" (110 mm) dia " S " trap. No. 1280.00

T 148 Supplying and fixing 4" (110 mm) Multi floor trap. No. 655.00

T 149 Supplying and fixing 4" (110 mm) dia Tee with cleaning eye. No. 895.00

T 150 Supplying and fixing 4" (110 mm) dia.Bend. No. 740.00

T 151 Supplying and fixing 6" (160mm) dia. Bend. No. 955.00

T 152 Supplying and fixing Reducing Tee 6" x 4" (160mm x 110mm) No. 1660.00
T 153 Supplying and fixing 1 1/2" (50 mm) dia Swept tee with cleaning No. 460.00
eye.

T 154 Supplying and fixing 1 1/2" (50 mm) dia Swept tee. No. 460.00

Engineering organization, W.P. Page 39 BSR 2010


ITEM DESCRIPTION UNIT RATE

T 155 Supplying and fixing 1 1/2" (50 mm) dia Equal tee. No. 415.00
T 156 Supplying and fixing 1 1/2" (50 mm) dia Bend with cleaning eye. No. 390.00

Hot water Pipes & Fittings


T 157 Supplying , laying and/or fixing 1/2" dia. CPVC - SDR pipes. L.ft. 105.00
(Specials paid separately).

T 158 Supplying , laying and/or fixing 1" dia. CPVC - SDR pipes. L.ft. 180.00
(Specials paid separately).

T 159 Supplying and fixing 1/2" dia. CPVC Socket. No. 60.00

T 160 Supplying and fixing 1" dia. CPVC Socket. No. 300.00

T 161 Supplying and fixing 1/2" dia. CPVC Valve Socket. No. 70.00

T 162 Supplying and fixing 1" dia. CPVC Valve Socket. No. 318.00

T 163 Supplying and fixing 1/2" dia. CPVC Faucet Socket. No. 92.00

T 164 Supplying and fixing 1" dia. CPVC Faucet Socket. No. 395.00

T 165 Supplying and fixing 1/2" dia. CPVC Tee. No. 92.00

T 166 Supplying and fixing 1" dia. CPVC Tee. No. 560.00

T 167 Supplying and fixing CPVC Elbow 1/2" x 45o No. 76.00

T 168 Supplying and fixing CPVC Elbow 1/2" x 90o No. 76.00

T 169 Supplying and fixing CPVC Elbow 1" x 45o No. 505.00

o
T 170 Supplying and fixing CPVC Elbow 1" x 90 No. 435.00

T 171 Supplying and fixing CPVC Reducing Socket 1" x 1/2" No. 270.00

T 172 Supplying and fixing CPVC Reducing Tee 1" x 1/2" No. 485.00

T 173 Supplying and fixing 1/2" dia. CPVC End Cap. No. 56.00

T 174 Supplying and fixing 1" dia. CPVC End Cap. No. 210.00

T 175 Supplying and fixing 1/2" dia. CPVC Tap End Plug. No. 810.00

T 176 Supplying and fixing 1/2" dia. CPVC Union. No. 645.00

T 177 Supplying and fixing 1/2" dia. CPVC Elbow Holder. No. 725.00

T 178 Supplying and fixing 1" dia. CPVC Elbow Holder. No. 875.00

T 179 Supplying and fixing 1/2" dia. CPVC Brass Male Adapter. No. 460.00

T 180 Supplying and fixing 1/2" dia. CPVC Brass Female Adapter. No. 695.00

Engineering organization, W.P. Page 40 BSR 2010


ITEM DESCRIPTION UNIT RATE

T 181 Supplying and fixing 1/2" dia. CPVC Brass Elbow. No. 625.00

Water Pump
T 182 Supplying and fixing water pump single phase manufactured by " No. 19625.00
Jinasena" Model no:- N110T/1 ,size 1" x 1" , 0.75 H.P. , total
head 80'-0" , out put 1000 I.g/hr. as per manufacturer's
specifications. Rate include for fixing 1" dia. Foot valve approved
make, Positioning and mount the pump on a concrete bed 9" x 9"
x 3" thick in 1:2:4(3/4") with 10mm dia. hexagonal bolts to
required lengh , Nuts & Washers 1/16" thick complete in working
order using necessary P.V.C. pipes, specials...etc. & electrical
supply from the closest DB. Pipes , specials & electricity
connection paid separatly.

Test

T 183 Water Pressure testing for PVC pipes. Item 1000.00


T 184 Testing of Water tanks & Sumps as per clause 3.8.6 of SCA/4/11 Item 4000.00

U - DRAINAGE

Waste Water Manhole - Brick


U 01 Construction of waste water brick manhole internal size of 1'-0" x No. 1890.00
1'-0" & depth upto 1'-3", consist of 3" thick Grade 15 concrete
base and 4 1/2" thick brick masonry side walls in 1:3 cement sand
mix , 1/2" thick cement rendering in 1:2 to internal & external
exposed faces of walls finished smooth with neat cement floating,
with 2" thick Grade 20 RCC cover slab with 6mm dia. M.S. rods
@ 4" c/c both ways. Rate to include for excavation, necessary
formwork , lifting hooks & 3" thick concrete pad as per Drawing
No:-WSS/10/01

U 02 Construction of waste water brick manhole internal size of 1'-3" x No. 3015.00
1'-3" & depth upto 2'-0", consist of 3" thick Grade 15 concrete
base and 4 1/2" thick brick masonry side walls in 1:3 cement sand
mix , 1/2" thick cement rendering in 1:2 to internal & external
exposed surfaces of walls finished smooth with neat cement
floatings, with 2" thick Grade 20 RCC cover slab with 6mm dia.
M.S. rods @ 4" c/c both ways. Rate to include for excavation,
necessary formwork , lifting hooks & 3" thick concrete pad as per
Drawing No:- WSS/10/01

Engineering organization, W.P. Page 41 BSR 2010


ITEM DESCRIPTION UNIT RATE

U 03 Construction of waste water brick manhole internal size of 1'-6" x No. 4700.00
1'-6" & depth 2'-0"to 3'-0", consist of 3" thick Grade 15 concrete
base and 4 1/2" thick brick masonry side walls in 1:3 cement sand
mix , 1/2" thick cement rendering in 1:2 to internal & external
exposed surfaces of walls finished smooth with neat cement
floatings, with 3" thick Grade 20 RCC cover slab with 10mm
dia.tor steel @ 6" c/c both ways. Rate to include for excavation,
necessary formwork, lifting hooks & 6" thick concrete pad as per
Drawing No:-WSS/10/01

U 04 Construction of waste water brick manhole internal size of 2'-0" x No. 11585.00
2'-0" & depth vary from 2'-0"-3'-0", consist of 4" thick Grade 15
concrete base and 9" thick brick masonry side walls in 1:3 cement
sand mix ,1/2" thick cement sand rendering in 1:2 to all internal
surfaces and external exposed surfaces of walls finished smooth
with neat cement floating , with 3" thick Grade 20 RCC cover
slab with 10mm dia. tor steel @ 6" c/c both ways.Rate to include
for excavation, necessary formwork, lifting hooks and 6" thick
concrete pad as per Drawing No:- WSS/10/01

Waste Water Manhole - Concrete


U 05 Construction of waste water concrete manhole internal size of 1'- No. 2610.00
0" x 1'-0" & depth up to 1'-3", consist of 4" thick Grade 20
concrete base and sides ,with 2" thick Grade 20 RCC cover slab
with 6mm dia.M.S. rods @ 4" c/c both ways. Rate to include for
excavation, necessary formwork, lifting hooks and 1/2" thick
cement sand rendering in 1:2 mix trowel smooth with neat grey
cement to all internal surfaces and external exposed surfaces as
per Drawing No:-WSS/10/02

U 06 Construction of waste water concrete manhole internal size of 1'- No. 3390.00
3" x 1'-3" & depth up to 2'-0", consist of 4" thick Grade 20
concrete base and sides ,with 2" thick Grade 20 RCC cover slab
with 6mm dia.M.S. rods @ 4" c/c both ways. Rate to include for
excavation, necessary formwork, lifting hooks and 1/2" thick
cement sand rendering in 1:2 mix trowel smooth with neat grey
cement to all internal surfaces and external exposed surfaces as
per Drawing No:-WSS/10/02

U 07 Construction of waste water concrete manhole internal size of 1'- No. 11475.00
6" x 1'-6" & depth vary from 2'-0' - 3'-0", consist of 3" thick
Grade15 lean concrete & 5" thick Grade 20 RCC base and side
walls with 10mm dia.tor steel @ 6" c/c both ways and 3" thick
Grade 20 RCC cover slab with 10mm dia. tor steel @ 6" c/c both
ways. Rate to include for excavation, necessary formwork, lifting
hooks and 1/2" thick cement & sand rendering in 1:2 mix trowel
smooth with neat grey cement to all internal surfaces and external
exposed surfaces as per Drawing No:- WSS/10/02

Engineering organization, W.P. Page 42 BSR 2010


ITEM DESCRIPTION UNIT RATE

Sewer Manhole - Brick


U 08 Construction of brick sewer manhole internal size of 2'-1" x 1'-7" No. 10705.00
& depth vary from 1'-6" - 3'-0", consist of 6" thick Grade 15 lean
concrete base and 9" thick brick masonry side walls in 1:3 cement
sand mix ,with 3" thick Grade 20 RCC cover slab with 10mm
dia.tor steel @ 6" c/c both ways.Rate to include for excavation,
necessary formwork, lifting hooks, concrete pad and 1/2" thick
cement & sand rendering in 1:2 mix trowel smooth with neat grey
cement to all internal surfaces , exposed external surfaces and
forming channel with 1:6 benching as per Drawing No:-
WSS/10/03

U 09 Construction of brick sewer manhole internal size of 2'-6" x 1'-7" No. 12840.00
& depth vary from 2'-0" - 3'-0", consist of 6" thick Grade 15 lean
concrete base and 9" thick brick masonry side walls in 1:3 cement
sand mix ,with 3" thick Grade 20 RCC cover slab with 10mm
dia.tor steel @ 6" c/c both ways. Rate to include for excavation,
necessary formwork, lifting hooks , concrete pad and 1/2" thick
cement & sand rendering in 1:2 mix trowel smooth with neat grey
cement to all internal surfaces , exposed external surfaces and
forming channel with 1:6 benching as per Drawing No:-
WSS/10/03

U 10 Construction of brick sewer manhole internal size of 3'-4 1/2" x 2'- No. 17870.00
3" & depth vary from 2'-0" - 3'-0", consist of 6" thick Grade 15
lean concrete base and 9" thick brick masonery side walls in 1:3
cement sand mix ,with 3" thick Grade 20 RCC cover slab with
10mm dia.tor steel @ 6" c/c both ways.Rate to include for
excavation, necessary formwork, lifting hooks , concrete pad and
1/2" thick cement & sand rendering in 1:2 mix trowel smooth
with neat grey cement to all internal surfaces , exposed external
surfaces and forming channel with 1:6 benching as per Drawing
No:- WSS/10/04

U 11 Construction of brick sewer manhole internal size of 4'-6" x 2'-7 No. 23115.00
1/2" & depth vary from 2'-0" - 3'-0", consist of 6" thick Grade 15
lean concrete base and 9" thick brick masonry side walls in 1:3
cement sand mix ,with 3" thick Grade 20 RCC cover slab with
10mm dia.tor steel @ 6" c/c both ways.Rate to include for
excavation, necessary formwork, lifting hooks, concrete pad and
1/2" thick cement & sand rendering in 1:2 mix trowel smooth
with neat grey cement to all internal surfaces , exposed external
surfaces and forming channel with 1:6 benching as per Drawing
No:- WSS/10/05

Engineering organization, W.P. Page 43 BSR 2010


ITEM DESCRIPTION UNIT RATE

U 12 Construction of brick sewer manhole internal size of 4'-6" x 2'-7 No. 29085.00
1/2" & depth vary from 3'-0" - 5'-0", consist of 6" thick Grade 15
lean concrete base and 9" thick brick masonery side walls in 1:3
cement sand mix ,with 3" thick Grade 20 RCC cover slab with
10mm dia.tor steel @ 6" c/c both ways.Rate to include for
excavation, necessary formwork, lifting hooks, concrete pad and
1/2" thick cement & sand rendering in 1:2 mix trowel smooth
with neat grey cement to all internal surfaces , exposed external
surfaces and forming channel with 1:6 benching as per Drawing
No:- WSS/10/05

U 13 Construction of brick Interceptor manhole internal size4'-6"x 2'-7 No. 39375.00


1/2" depth up to 5'-6" Consists of 3" thick grade 15 lean
concrete & 6" thick Grade 20 conrete base , 9" thick brick
masonry side walls in 1:3 cement sand mix ,with 3" thick Grade
20 RCC cover slab with 10mm dia.tor steel @ 6" c/c both
ways.Rate to include for excavation, necessary formwork, lifting
hooks concrete pad and 1/2" thick cement & sand rendering in
1:2 mix trowel smooth with neat grey cement to all internal
surfaces , exposed external surfaces including interceptor with
stopper and forming channels with 1:6 benching including
working spaces as per Drawing No:- WSS/10/06

U 14 Construction of brick drop manhole internal size 4'-6"x 2'-7 1/2" No. 30955.00
and depth up to 5'-0", Consists of 6" thick Grade 20 conrete base
with 10mm dia. tor steel @ 8" c/c bothways on 3"thick Grade 15
lean concrete and 9" thick brick masonry side walls in 1:3 cement
sand mix ,with 3" thick Grade 20 RCC cover slab with 10mm
dia. tor steel @ 6" c/c both ways. Rate to include for excavation,
necessary formwork, lifting hooks , concrete pad and 1/2" thick
cement & sand rendering in 1:2 mix trowel smooth with neat grey
cement to all internal surfaces , exposed external surfaces and
forming channels with 1:6 benching including P.V.C. specials ,
M.S. foot steps & working spaces as per Drawing No:-
WSS/10/07

U 15 Construction of brick drop manhole internal size 4'-6"x 2'-7 1/2" No. 45780.00
and depth vary from 5'-0" - 10'-0", Consists of 6" thick Grade 20
conrete base with 10mm dia. tor steel @ 8" c/c bothways on
3"thick Grade 15lean concrete and 9" thick brick masonery side
walls in 1:3 cement sand mix ,with 3" thick Grade 20 RCC cover
slab with 10mm dia.tor steel @ 6" c/c both ways.Rate to include
for excavation, necessary formwork, lifting hooks , concrete pad
and 1/2" thick cement & sand rendering in 1:2 mix trowel smooth
with neat grey cement to all internal surfaces , exposed external
surfaces and forming channel with 1:6 benching including P.V.C.
specials, M.S. foot step & working spaceas per Drawing No:-
WSS/10/07

Engineering organization, W.P. Page 44 BSR 2010


ITEM DESCRIPTION UNIT RATE

Sewer Manhole - Concrete


U 16 Construction of RCC sewer manhole internal size of 2'-1" x 1'-7" No. 15290.00
& depth up to 2'-0", consist of 2" thick Grade 15 lean concrete
and 6" thick Grade 20 concrete base and side walls r/f with 10mm
dia. tor steel @ 8" c/c bothways , with 3" thick Grade 20 RCC
cover slab with 10mm dia.tor steel @ 6" c/c both ways.Rate to
include for excavation, necessary formwork, lifting hooks and
1/2" thick cement & sand rendering in 1:2 mix trowel smooth with
neat grey cement to all internal surfaces , exposed external
surfaces and forming channel with 1:6 benching.as per Drawing
No:- .WSS/10/08

U 17 Construction of RCC sewer manhole internal size of 2'-6" x 1'-7" No. 17880.00
& depth vary from 2'-0" - 3'-0" , consist of 2" thick Grade 15 lean
concrete and 6" thick Grade 20 concrete base and side walls r/f
with 10mm dia. tor steel @ 8" c/c bothways , with 3" thick Grade
20 RCC cover slab with 10mm dia.tor steel @ 6" c/c both ways.
Rate to include for excavation, necessary formwork, lifting hooks
and 1/2" thick cement , sand rendering in 1:2 mix trowel smooth
with neat grey cement to all internal surfaces , exposed external
surfaces and forming channel with 1:6 benching as per Drawing
No:- WSS/10/08

U 18 Construction of RCC sewer manhole internal size of 3'-4 1/2" x 2'- No. 27000.00
3" & depth vary from 2'-0" - 3'-0" , consist of 2" thick Grade 15
lean concrete and 6" thick Grade 20 concrete base and side walls
r/f with 10mm dia. tor steel @ 8" c/c bothways , with 3" thick
Grade 20 RCC cover slab with 10mm dia.tor steel @ 6" c/c both
ways.Rate to include for excavation, necessary formwork, lifting
hooks and 1/2" thick cement , sand rendering in 1:2 mix trowel
smooth with neat grey cement to all internal surfaces , exposed
external surfaces and forming channel with 1:6 benching as per
Drawing No:-WSS/10/09

U 19 Construction of RCC sewer manhole internal size of 4'-6" x 2'-7 No. 33950.00
1/2" & depth vary fro0m 2'-0" - 3'-0" , consist of 2" thick Grade
15 lean concrete and 6" thick Grade 20 concrete base and side
walls r/f with 10mm dia. tor steel @ 8" c/c bothways , with 3"
thick Grade 20 RCC cover slab with 10mm dia.tor steel @ 6" c/c
both ways.Rate to include for excavation, necessary formwork,
lifting hooks and 1/2" thick cement & sand rendering in 1:2 mix
trowel smooth with neat grey cement to all internal surfaces ,
exposed external surfaces and forming channel with 1:6 benching
as per Drawing No:-WSS/10/08

Engineering organization, W.P. Page 45 BSR 2010


ITEM DESCRIPTION UNIT RATE

U 20 Construction of RCC sewer manhole internal size of 4'-6" x 2'-7 No. 45780.00
1/2" & depth vary from 3'-0" - 5'-0" , consist of 2" thick Grade 15
lean concrete and 6" thick Grade 20 concrete base and side walls
r/f with 10mm dia. tor steel @ 8" c/c bothways , with 3" thick
Grade 20 RCC cover slab with 10mm dia.tor steel @ 6" c/c both
ways.Rate to include for excavation, necessary formwork, lifting
hooks and 1/2" thick cement , sand rendering in 1:2 mix trowel
smooth with neat grey cement to all internal surfaces , exposed
external surfaces and forming channel with 1:6 benching as per
Drawing No:- WSS/10/10

Manhole Covers
U 21 RCC Manhole cover size of 2'-0" x 2'-0" approx. & 3" thick Sq.ft. 505.00
Consist of 1:2:4(3/4") concrete & 10mm dia. Tor steel bars @ 6"
C/C both ways. Rate include necessary formwork and lifting
hooks.

U 22 Supplying & fixing heavy duty Cast Iron manhole cover size of No. 6570.00
24" x 18" including cover frame.

Gulleys
U 23 Gulley S.W. 4" supplied and fixed including 1:2:4(3/4")concrete No. 1580.00
gully box.

U 24 Construction of gully internal size of 1'-2" x 1'-2" & depth up to No. 3630.00
1'-4" , consist of 3" thick Grade 20 concrete base and 4 1/2"
thick brick masonary side walls in 1:3 cement sand mix , with 2"
thick Grade 20 RCC cover slab with 6mm dia.M S rods @ 4" c/c
both ways.Rate to include for excavation, necessary formwork,
lifting hooks,,supplying P.V.C.gully trap infill with grade 20
concreate and 1/2" thick cement & sand rendering in 1:2 mix
trowel smooth with neat grey cement to all internal surfaces ,
exposed external surfaces and forming channel with 1:6 benching
as per Drawing No:-WSS/10/11

Soakage Pits
U 25 Construction of 4'-0" dia. soakage pit in hard soil.. as per No. 22490.00
Drawing No:- WSS/SP/01

U 26 Construction of 6'-0" dia. soakage pit in hard soil. as per No. 41425.00
Drawing No:- WSS/SP/02

U 27 Construction of 8'-0" dia. soakage pit in hard soil. as per No. 57570.00
Drawing No:- WSS/SP/03

U 28 Construction of 4'-0" dia. soakage pit in loose soil.. as per No. 52370.00
Drawing No:- WSS/SP/04

U 29 Construction of 6'-0" dia. soakage pit in loose soil. as per No. 83055.00
Drawing No:- WSS/SP/05

U 30 Construction of 8'-0" dia. soakage pit in loose soil. as per No. 112040.00
Drawing No:- WSS/SP/06

Engineering organization, W.P. Page 46 BSR 2010


ITEM DESCRIPTION UNIT RATE

Septic tanks
U 31 Construction of 30 person Septic tank (Brick) in hard soil. as per No. 120480.00
Drawing No:- WSS/ST/01

U 32 Construction of 50 person Septic tank (Brick) in hard soil. as per No. 140695.00
Drawing No:- WSS/ST/01

U 33 Construction of 70 person Septic tank (Brick) in hard soil. as per No. 158490.00
Drawing No:- WSS/ST/02

U 34 Construction of 100 person Septic tank (Brick) in hard soil. as No. 192800.00
per Drawing No:- WSS/ST/01

U 35 Construction of 150 person Septic tank (Brick) in hard soil. as No. 251945.00
per Drawing No:- WSS/ST/02

U 36 Construction of 100 person RCC Septic tank in hard/loose soil. No. 393060.00
as per Drawing No:-WSS/ST/03

U 37 Construction of 150 person RCC Septic tank in hard/loose soil. No. 497200.00
as per Drawing No:- WSS/ST/04

U 38 Supplying and fixing 4'-0" dia.x 8'-0" Pre-cast Septic tank No. 43130.00
(manufactured by SEC) including excavation depth not exeeding
8'-0" and Rate shall include a sand fill upto 2'-0" hight
sorrounding the tank.
U 39 Supplying and fixing 3'-0" internal dia.x 4'-0" depth & 3" thick No. 24260.00
walls, Pre-cast Soakage pit with perporated holes including
necessary excavation including working space and 6" thick rubble
packing sorrounding the tank. Rate shall include hire charges of
boomtruck for placing and subject to specified approved by the
Divisional Engineer.

V - ELECTRICAL INSTALLATION.

Note:

Work shall be done in accordance with specifications for


electrical and mechanical works(ICTAD Publication
No.SCA/8 of Nov.1987

Internal lighting wiring shall comply with the drawings and


1 shall be in 230/440 volt single core PVC insulated copper
cables

All switches and socket outlets shall be plated type "Clipsal",


2
" Orange"or Cabtree make.

All Fluorescent fittings of powder coated gauge 24 GI should


be complete with choke (Make:-"Atco","BG" original or -
3
Equivalent) starter and the tube should be Thron, Philips, or
Osram

All ceiling fans should be KDK, National, Mitsubishi, Hittachi


4 (Original Japan)with guarantee card from the authorized
dealer.

Engineering organization, W.P. Page 47 BSR 2010


ITEM DESCRIPTION UNIT RATE

Rate to include switch boxes, plugs, round or square blocks,


Chromium plated M.S. chains, brass hooks, ceiling roses,
5
holders (angle batten and ordinary battens) and any other
item necessary.

All distribution boards should be incorporated with multi 9


genuine Merlin Gerin, A.B.B. , Hager, F & G , clipsal make
MCB's ( Miniature circuit Breaker ) and cabtree, F & G,
6 Clipsal , Merlin Gerin make R.C.C.B.'s (Residual Current
circuit Breaker) and Terrasaki, Merlin Gerin, , Dormans
Smith ,Biticano , Clockner moeller make M.C.C.B.'s
(Moulded Case Circuit Breakers)

The whole installation shall be carried out according to


7
CEB/IEE wiring regulations.

All the M.C.C.B.'s for the distribution boards should be


purchased from the following authorized agents or from their
8 dealers and a certificate or invoice along with their Company
seal and Part No., numbers should be produced at the time of
payment.

Type Agent

1. Merlin Gerin M.C.C.B.'s Figaro Ltd.

2. F & G, M.C.B.'s and R.C.C.B.'s Rotex Ltd.

3. Terrasaki M.C.C.B.'s Rotex Ltd.

4. Cabtree R.C.C.B.'s Nawaloka Ltd.

5. Moeller MCB,MCCB,RCCB Richardson .


Electrical (Pvt) Ltd.

6. Orange,Switches and Socket outlet OS Projects


. (Pvt) Ltd.

7. Steel Enclosures Rotax Ltd./ Magline Ltd. / .


Figaro Ltd./MSS(Pvt) Ltd.

9 The height of the light bracket from floor level is 2.5m

10 Height of the switches from floor level is 1.5m

No ceiling fan should be installed at a height of less than 2.7m


11
from floor level

The distance of a light source from the wall should be equal


to one half the distance between two adjacent light sources
12
and also the distance between light fittings should not exceed
1.5 times the Mounting height.

Engineering organization, W.P. Page 48 BSR 2010


ITEM DESCRIPTION UNIT RATE

Point wiring only with and including switches (Rate includes


13 wiring from MCB through switch to lamp point and includes
the switch, switch box, lamp holder wire and conduit)

V 01 Light point wired through a 5Amp one gang one way plate switch Per Point 1230.00
using 2x1/1.13(2x1/044) P.V.C. insulated copper wire in fully
concealed/surface P.V.C. conduits.

V 02 Light points wired through a 5 Amp two gang one way plate Per Point 1845.00
switch using 2x1/1.13 (2x1/044) P.V.C. insulated copper wire in
fully concealed/surface P.V.C. conduits.

V 03 Light points wired through a 5 Amp three gang one way plate Per Point 2460.00
switch using 2x1/1.13 (2x1/044) P.V.C. insulated copper wire in
fully concealed/surface P.V.C. conduits.

V 04 Light points wired through a 5 Amp four gang one way plate Per Point 3060.00
switch using 2x1/1.13 (2x1/044) P.V.C. insulated copper wire in
fully concealed/surface P.V.C. conduits.

V 05 Light points-wired through a 5Amp 5 gang one way plate switch Per Point 3665.00
using 2x1/1.13 (2x1/044) P.V.C. insulated copper wire in fully
concealed/surface P.V.C. conduits.

V 06 Light point wired through a 5Amp one gang two way plate switch Per Point 1370.00
using 2x1/1.13 (2x1/044) P.V.C. insulated copper wire in fully
concealed/surface P.V.C. conduits.

V 07 Light point wired through a 5 Amp one gang one way plate Per Point 1915.00
switch using 2x1/1.13(2x1/044) P.V.C. insulated copper wire in
fully surface plastic casing and capping.

V 08 Light points wired through a 5 Amp two gang one way plate Per Point 2530.00
switch using 2x1/1.13(2x1/044) P.V.C. insulated copper wire in
fully surface plastic casing and capping.

V 09 Light points wired through a 5 Amp three gang one way plate Per Point 3150.00
switch using 2x1/1.13(2x1/044) P.V.C. insulated copper wire in
fully surface plastic casing and capping.

V 10 Light points wired through a 5 Amp four gang one way plate Per Point 3770.00
switch using 2x1/1.13(2x1/044) P.V.C. insulated copper wire in
fully surface plastic casing and capping.

V 11 Light points wired through a 5 Amp. 5 gang one way plate Per Point 4355.00
switch using 2x1/1.13(2x1/044) P.V.C. insulated copper wire in
fully surface plastic casing and capping.

V 12 Light point wired through a 5Amp one gang two way plate switch Per Point 2750.00
using 2x1/1.13(2x1/044) P.V.C. insulated copper wire in fully
surface plastic casing and capping.

Engineering organization, W.P. Page 49 BSR 2010


ITEM DESCRIPTION UNIT RATE

V 13 Light point wired through a 5 Amp one gang one way plate Per Point 1670.00
switch using 2x1/1.13 ( 2x1/044)P.V.C. insulated copper wire in
half surface with plastic casing and capping and other half in
open air.
V 14 Light points wired through a 5 Amp two gang one way using Per Point 2210.00
2x1/1.13 ( 2x1/044)P.V.C. insulated copper wire in half surface
with plastic casing & capping and other half in conduit.

V 15 Light points wired through a 5 Amp three gang one way using Per Point 2835.00
2x1/1.13 ( 2x1/044)P.V.C. insulated copper wire in half surface
with plastic casing & capping and other half in conduit.

V 16 Light points wired through a 5 Amp four gang one way plate Per Point 3450.00
switch using 2x1/1.13 ( 2x1/044)P.V.C. insulated copper wire in
half surface with plastic casing & capping and other half in
conduit.

V 17 Light points wired through a 5 Amp. five gang one way plate Per Point 4075.00
switch using 2x1/1.13 ( 2x1/044)P.V.C. insulated copper wire in
half surface with plastic casing & capping and other half in
conduit.

V 18 Light point wired through a 5Amp one gang two way plate switch Per Point 2750.00
using 2x1/1.13 ( 2x1/044)P.V.C. insulated copper wire in half
surface with plastic casing & capping and other half in conduit.

V 19 Electric Bell with Bell press switch using 2x1/1.13mm (2x1.044 Per Point 2065.00
PVC/insulated copper wire in fully concealed/ surface PVC
conduits.

V 20 Electric Bell with bell press switch using flexible wire (twisted No. 2155.00
twin wire) only in the table legs and floor crossings.

V 21 5 Amp Switch socket outlet wired using 2x1/1.13 P.V.C. No. 1900.00
insulated copper wire & 1x7/0.67(7/029)copper earth wire in
fully concealed/surface P.V.C. conduits.

V 22 5 Amp Switch socket outlet wired using 2x1/1.13 P.V.C. No. 2425.00
insulated copper wire & 1x7/0.67(7/029)copper earth wire in
fully surface plastic casing and capping.

V 23 15 Amp switch socket outlet wired using 2x7/0.67(2x7/029) No. 2400.00


insulated copper wire & 1x7/0.67 copper earth wire in surface
plastic casing and capping.

V 24 15 Amp switch socket outlet wired using 2x7/0.67(2x7/029) No. 2800.00


insulated copper wire & 1x7/0.67 copper earth wire in fully
concealed/surface P.V.C. conduits.

Engineering organization, W.P. Page 50 BSR 2010


ITEM DESCRIPTION UNIT RATE

V 25 Flush mounted 13 Amp. non-reversible type square pin switched No.


socket outlets wired in ring circuit using 4x1x7/0.67 PVC
insulated copper wire and 2x7/0.67 PVC insulated copper earth
wire in casing and capping.

R = 600/= x L+320/= x N

R = Rate per circuit (to be calculated as per formula.

L = Distance from DB to last socket ( in Meter)

N = Number of 13 Amp. sockets


V 26 Fan regulator wired without a switch using 2x1/1.13 mm P.V.C. No. 1800.00
insulated copper wire 1x7/0.67 P.V.C. insulated copper earth
wire in fully concealed/surface P.V.C. conduits.

V 27 Fan regulator wired through a 5 Amp plate one gang one way No. 1900.00
switch using 2x1/1.13 mm P.V.C. insulated copper wire 1x7/0.67
P.V.C. insulated copper earth wire in fully concealed/surface
P.V.C.conduits.

V 28 Fan regulator wired without a switch using 2x1/1.13 mm P.V.C. No. 2230.00
insulated copper wire 1x7/0.67 P.V.C. insulated copper earth
wire in fully surface plastic casing and capping.

V 29 Fan regulator wired through a 5 Amp plate one gang one way No. 2390.00
switch using 2x1/1.13 mm P.V.C. insulated copper wire 1x7/0.67
P.V.C. insulated copper earth wire in fully surface plastic casing
and capping

V 30 Fan regulator wired without a switch using 2x1/1.13 mm P.V.C. No. 2545.00
insulated copper wire 1x7/0.67 P.V.C. insulated copper earth
wire in half surface with plastic casing and copping and other half
in open area.

V 31 Fan regulator wired through a 5 Amp plate one gang one way No. 2165.00
switch using 2x1/1.13 mm P.V.C. insulated copper wire 1x7/0.67
P.V.C. insulated copper earth wire

V 32 Two Fan regulator wired through a 5Amp plate two gang one No. 3955.00
way switch using 2x1/1.13 mm P.V.C. insulated copper wire
1x7/0.67 P.V.C. insulated copper earth wire in fully concealed/
surface PVC conduit

V 33 Three Fan regulator wired through a 5Amp plate three gang one No. 5470.00
way switch using 2x1/1.13 mm P.V.C. insulated copper wire
1x7/0.67 P.V.C. insulated copper earth wire in fully concealed/
surface PVC conduit

Engineering organization, W.P. Page 51 BSR 2010


ITEM DESCRIPTION UNIT RATE

Supply install and wiring the following (Rate includes wiring


from MCB through switch and regulator to the fan point and
includes the cost of fan)
V 34 Supply and install a electrical fan and fan regulator wired through No. 7830.00
a 5Amp plate one gang one way switch using 2x1/1.13 mm
P.V.C. insulated copper wire 1x7/0.67 P.V.C. insulated copper
earth wire in fully concealed surface P.V.C. conduit.

V 35 Supply and install a electrical fan and fan regulator wired through No. 8270.00
a 5Amp plate one gang one way switch using 2x1/1.13 mm
P.V.C. insulated copper wire 1x7/0.67 P.V.C. insulated copper
earth wire in fully concealed surface casing and capping.

V 36 Supply and install a electrical fan and fan regulator wired through No. 8000.00
a 5Amp plate one gang one way switch using 2x1/1.13 mm
P.V.C. insulated copper wire 1x7/0.67 P.V.C. insulated copper
earth wire in fully surface with plastic casing and capping and
other half in conduit.

Supply & Install only the following fillings.


V 37 7" Diameter recess mounted anodized down lighter with No. 1520.00
aluminum reflector "Orange" Brand & Model No:YLI401 or
approved equivalent.
V 38 7" Diameter surface mounted black colour anodized down lighter
with aluminum reflector "Orange" Brand & Model No:YLI3400 No. 1630.00
or approved equivalent.

V 39 6" Diameter pendent type anodized cylindrical down lighter


"Orange" Brand & Model No:FAR01 or approved equivalent. No. 2165.00

V 40 5" / 6" Diameter wall mounted shaped upward light fitting


"Orange" Brand & Model No:YLIUDL7004 or approved No. 4150.00
equivalent.
V 41 Weatherproof IP64 rated aluminum die-casting surface mounted
round half covered outdoor bulk head lamp "Orange" Brand & No. 2850.00
Model No:FWP43118 or approved equivalent.
V 42 8" Half round glass globe pendent type fitting "Orange" Brand &
Model No:YLI401 YLIHLFGLOBE GALSS or approved No. 3310.00
equivalent.
V 43 8" White colour trasparent glass globe pendent type fitting
"Orange" Brand & Model No:YLIGLOBE GALSS or approved No. 2165.00
equivalent.
V 44
Bracket lamp with batton holder including bulbs No. 465.00
V 45
Pendent Lamp No. 455.00
V 46 20W CFL lamp with one year warranty - Osram , Philips or
No. 550.00
Approved Equivelant.
V 47
Spot light (equivalent to Osram Halospot) - German make No. 2275.00

Engineering organization, W.P. Page 52 BSR 2010


ITEM DESCRIPTION UNIT RATE

V 48 Mercury Vapour Lamp bracket complete 125 watts with clamps No. 7690.00
(equivalent to Siemens SNA 395)

V 49
-Ditto- 250 watts (equivalent to Siemens SNA 395) No. 14420.00
V 50
Ceiling fan 56" Sweep (KDK,National,Mitsubishi,Hittachi ) No. 6800.00
V 51 Dimmer type fan regulator with a switch (Clipsal, KDK or No. 650.00
equivalent)
V 52
Exhaust or blower fan 12" dia. (K.D.K. or Equivalent ) No. 10850.00
V 53
Wall mounted fan - European make (K.D.K. or Equivalent ) No. 12400.00

Note:

In all fluorescent lamp complete fittings incorporating, choke-


Atco, BG and starter, Bulb-Philips, Osram, Thorn Choke-
Atco, Starter - BG and Bulbs - Philips, osram, Thorn

V 54 4-0" long x 40W single fluorescent lamp suspension - Reflector No. 1000.00
type.

V 55 4-0" long x 40W single fluorescent lamp suspension - Box type No. 1000.00

V 56 4-0" long x 40W single fluorescent lamp suspension - Diffuser No. 1150.00
type

V 57 4' -0" long x 40W Twin fluorescent lamp suspension , powder No. 1500.00
coated - reflector type.

V 58 4' -0" long x 40W Twin fluorescent lamp suspension , powder No. 1500.00
coated - Box type

V 59 4' -0" long x 40W Twin fluorescent lamp suspension , powder No. 2050.00
coated - Diffuser type

V 60 2 x 20W single fluorescent lamp suspension , powder coated - No. 760.00


reflector type

V 61 2 x 20W single fluorescent lamp suspension , powder coated - No. 830.00


Box type

V 62 2 x 20W single fluorescent lamp suspension , powder coated - No. 995.00


Diffuser type

V 63 2'-0" long x 20W Twin fluorescent lamp suspension , powder No. 1300.00
coated - Reflector type

V 64 2'-0" long x 20W Twin fluorescent lamp suspension , powder No. 1300.00
coated - Box type

V 65 2'-0" long x 20W Twin fluorescent lamp suspension , powder No. 1550.00
coated - Diffuser type

V 66 4'-0" long x 20W single fluorescent lamp Batten , powder coated - No. 850.00
Reflector type

Engineering organization, W.P. Page 53 BSR 2010


ITEM DESCRIPTION UNIT RATE

V 67 4'-0" long x 20W single fluorescent lamp Batten , powder coated - No. 850.00
Box type

V 68 4'-0" long x 20W single fluorescent lamp Batten , powder coated - No. 1230.00
Diffuser type

V 69 4'-0" long x 20W Twin Fluorescent lamp Batten , powder coated - No. 1300.00
Reflector type

V 70 4'-0" long x 20W Twin Fluorescent lamp Batten , powder coated - No. 1300.00
Box type

V 71 4'-0" long x 20W Twin Fluorescent lamp Batten , powder coated - No. 1515.00
Diffuser type

V 72 2'-0" x 40W single fluorescent lamp Batten , powder coated - No. 1175.00
Reflector type

V 73 2'-0" x 40W single fluorescent lamp Batten , powder coated - No. 1175.00
Box type

V 74 2'-0" x 40W single fluorescent lamp Batten , powder coated - No. 1690.00
Diffuser type

V 75 2'-0" long x 40W Twin fluorescent lamp Batten , powder coated - No. 1380.00
Reflector type

V 76 2'-0" long x 40W Twin fluorescent lamp Batten , powder coated - No. 1380.00
Box type

V 77 2'-0" long x 40W Twin fluorescent lamp Batten , powder coated - No. 1590.00
Diffuser type

V 78 4-8 ways SP&N Distribution Board with thermo plastic frame No. 1420.00
and door, earth and neutral bars din trail type (protection rating
IP40)

V 79 8-10 ways SP&N Distribution board with thermo plastic frame No. 1420.00
and door, earth and neutral bars din trail type (protection rating
IP40)

V 80 10-12 ways SP&N Distribution board with thermo plastic frame No. 1610.00
and door, earth and neutral bars din trail type (protection rating
IP40)

V 81 14-16 ways SP&N distribution board with thermo plastic frame No. 1825.00
and door, earth and neutral bars din trail type (protection rating
IP40)

V 82 16-19 ways SP&N Distribution board with thermo plastic frame No. 1825.00
and door, earth and neutral bars din trail type (protection rating
IP40)

V 83 Provide an earth electrode copper plate 2'-0"x2'-0"x1/8" in 3m Item 20000.00


deep. Rate to include connection to the main panel, sub main,
earth clips, excavation etc. with 1'-0"x 1'-0"x 1'-0" earth pit
including 4 1/2" brick work and 3" concrete slab.

Engineering organization, W.P. Page 54 BSR 2010


ITEM DESCRIPTION UNIT RATE

V 84 Provide an earth electrode 2" dia 6'0" long G.I. pipe -ditto- with Item 1470.00
1'-0"x 1'-0"x 1'-0" earth pit including 4 1/2" brick work and 3"
concrete slab.

V 85 Supplying and wiring 2 x 2.5mm2 (7/.029") PVC/PVC/Cu cable L.ft. 50.00


+ 2.5mm2 (7/.029) earth wire to working order excluding conduit.

V 86 Supplying and wiring 2 x 6mm2 (7/.044") PVC/PVC/ Cu cable + L.ft. 118.00


6mm2 (7/.044") earth wire complete to working order excluding
conduit/casing
V 87 Supplying and wiring 2 x 6mm2 (7/.044") PVC/PVC/ Cu cable L.ft. 91.00
complete to working order excluding conduit/casing
V 88 Supplying and wiring 4 x 6mm2 (7/.044") PVC/PVC/ Cu cable + L.ft. 183.00
6mm2 (7/.044") earth wire complete to working order excluding
conduit/casing
V 89 Supplying and wiring 2 x 10mm2 (7/.052") PVC/PVC/ Cu cable L.ft. 167.00
+ 10mm2 (7/.052") earth wire complete to working order
excluding conduit/casing
V 90 Supplying and wiring 4 x 10mm2 (7/.052") PVC/PVC/ Cu cable L.ft. 281.00
+ 10mm2 (7/.052") earth wire complete to working order
excluding conduit/casing
V 91 2 L.ft. 254.00
Supplying and wiring 2 x 16mm (7/.064") PVC/PVC/ Cu cable
+ 16mm2 (7/.064") earth wire complete to working order
excluding conduit/casing
V 92 2 L.ft. 429.00
Supplying and wiring 4 x 16mm (7/0.064") PVC/PVC/ Cu cable
+ 16mm2 (7/.064") earth wire complete to working order
excluding conduit/casing
V 93 Supplying and wiring 2 x 25mm2 PVC/PVC/Cu cable + 16 mm2 L.ft. 421.00
earth wire complete to working order excluding conduit/casing.

V 94 Supplying and wiring 4 x 25mm2 PVC/PVC/Cu cable + 16 mm2 L.ft. 707.00


earth wire complete to working order excluding conduit/casing.

V 95 2 2 L.ft. 863.00
Supplying and wiring 4 x 35mm PVC/PVC/Cu cable + 16 mm
earth wire complete to working order excluding conduit/casing.

V 96 Supplying and wiring 4 x 95mm2 PVC/PVC/Cu cable + 50 mm2 L.ft. 2450.00


earth wire complete to working order excluding conduit/casing.

V 97 Supplying and fixing 2 core flexible (0.5mm2) . L.ft. 14.00


V 98 Supplying and wiring 2.5mm2 (7/.029") earth wire complete to L.ft. 13.00
working order excluding conduit/casing.
V 99 2 L.ft. 51.00
Supplying and wiring 6 mm (7/.044") earth wire complete to
working order excluding conduit/casing.

Engineering organization, W.P. Page 55 BSR 2010


ITEM DESCRIPTION UNIT RATE

V 100 Supplying and wiring 10 mm2 (7/.052") earth wire complete to L.ft. 60.00
working order excluding conduit/casing.
V 101 Supplying and wiring 16 mm2 (7/.064") earth wire complete to L.ft. 88.00
working order excluding conduit/casing.
V 102 Supplying and wiring 1mm2 (1/.044") PVC/PVC/ Cu two wire L.ft. 11.00
complete to working order excluding conduit/casing.
V 103 Supplying and wiring 2.5mm2 ((7/.029") PVC/PVC Cu two wire L.ft. 27.00
complete to working order excluding conduit/casing.
V 104 Supplying and wiring with 4mm2 (7/.036") PVC/PVC/Cu two L.ft. 34.00
wire complete to working order excluding conduit/casing.
V 105 Supplying and wiring with 2 x 4mm2 (7/.036") PVC/PVC/Cu L.ft. 80.00
cable+4mm2(7/.036) earth wire complete to working order
excluding conduit/casing.

V 106 Supplying and wiring with 4 x 4mm2 (7/.036") PVC/PVC/Cu L.ft. 135.00
cable+4mm2(7/.036) earth wire complete to working order
excluding conduit/casing.

V 107 Supplying and wiring with 2 x 2.5mm2(7/.029") PVC/PVC/Cu L.ft. 55.00


cable+2.5mm2(7/.036) earth wire complete to working order
excluding conduit/casing.

V 108 Supply and wiring 2 x 6mm2(7/044) PVC/PVC/CU Cable L.ft. 100.00


complete to working order excluding conduit & casing

Note:

Supply, install and wire with enclosure the following makes :

Cabtree, F & G, Genuine, Merlin & Gerin, Terrasaki,.

V 109 40Amp(30 mA) SP&N RCCB No. 3215.00

V 110 40Amp(100 mA) SP&N RCCB No. 3475.00

V 111 60Amp(30 mA) SP&N RCCB No. 4675.00

V 112 60Amp(100 mA) SP&N RCCB No. 5800.00

V 113 40Amp(30 mA) TP&N RCCB No. 4590.00

V 114 40Amp(100 mA) TP&N RCCB No. 4590.00

V 115 60Amp(30 mA) TP&N RCCB No. 7945.00

V 116 60Amp(100 mA) TP&N RCCB No. 7955.00

V 117 Main switch 30 Amp SP&N No. 1245.00

V 118 MCB SP (Single Pole) 6-40 Amp No. 737.00

Engineering organization, W.P. Page 56 BSR 2010


ITEM DESCRIPTION UNIT RATE

V 119 MCB SP 50-100 Amp No. 3530.00

V 120 MCB DP (Double Pole) 6-40 Amp No. 1730.00

V 121 MCB DP 50-100 Amp No. 1775.00

V 122 MCB TP ( Three Pole) 6-40 Amp No. 3680.00

V 123 MCB TP 50-100 Amp No. 4885.00

V 124 30,40,60,100 Amp Three pole MCCB with metal enclosure No. 12000.00
30,40,60,100 Amp four pole MCCB (25KA) with metal No. 16250.00
V 125 enclosure

V 126 30,40,60,100Amp Three pole MCCB without enclosure No. 9600.00


30,40,60,100Amp Three pole MCCB (25 Ka) without enclosure No. 13900.00
V 127

V 128 30 Amp TP&N main switch No. 4950.00

V 129 60 Amp TP&N main switch No. 8840.00

V 130 D'Bracket complete set (small size) No. 127.00


Supplying and fixing 30 A T.P.N. isolator complete to working No. 2255.00
V 131 order with enclosure.

Supplying and fixing 60 A T.P.N. isolator complete to working No. 3050.00


V 132 order with enclosure.

Supplying and fixing 100 A T.P.N. isolator complete to working No. 5130.00
V 133 order with enclosure.

Supplying and fixing 100 A T.P.N. isolator complete to working No. 1680.00
V 134 order with enclosure.

3/4" - 1" PVC conduits laying in the slab including placing 25.00
V 135 binding wire to draw through conduits. L.ft.

V 136 Supplying and fixing 5/8" PVC conduit including clips. L.ft. 16.00

V 137 Supplying and fixing 3/4" PVC conduit including clips. L.ft. 17.00

V 138 Supplying and fixing 1" PVC conduit including clips. L.ft. 18.00

V 139 Supplying and fixing 3" dia. PVC type 400 pipe including clips. L.ft. 210.00
Supplying and fixing 1 1 /2" dia. PVC type 400 pipe including L.ft. 55.00
V 140 clips.

Supplying and fixing 1 1 /4" dia. PVC type 400 pipe including L.ft. 50.00
V 141 clips.

V 142 Supplying and fixing 3/4" dia. PVC conduit bend No. 22.00

V 143 Supplying and fixing 1" dia. PVC conduit bend No. 26.00

Engineering organization, W.P. Page 57 BSR 2010


ITEM DESCRIPTION UNIT RATE

V 144 Supplying and fixing 1 1/2" dia. PVC conduit bend No. 65.00

V 145 Supplying and fixing 1 1/4" dia. PVC conduit bend No. 45.00

V 146 Supplying and fixing 2" dia. PVC conduit bend No. 95.00

V 147 Supplying and fixing 1 1/4" dia. PVC conduit pipe L.ft. 41.00

V 148 Supplying and fixing 1 1/2" dia. PVC conduit pipe L.ft. 58.00

V 149 Supplying and fixing 2" dia. PVC conduit pipe L.ft. 66.00

V 150 Supplying and fixing 1" dia. PVC conduit pipe L.ft. 15.00

V 151 Supplying and fixing 3/4" or 1" PVC conduit junction box. No. 24.00

V 152 Supplying and fixing 1" PVC casing L.ft. 20.00

V 153 Supplying and fixing 1 1/4" PVC casing L.ft. 24.00

V 154 Supplying and fixing 1 1/2" PVC casing L.ft. 28.00

V 155 Supplying and fixing 2" PVC casing L.ft. 38.00

V 156 Supplying and fixing 2"x 2: box casing. PVC casing L.ft. 65.00
Supply and install complete "D" shape bracket including Per Set 214.00
V 157 insulator, Nuts, bolts ect. fixed to working order.
Supply and install 2" x 2" x 6mm "L" Iron, including drilling L.ft. 220.00
V 158 12mm holes, 10mm G.I. bolt, and application of
anticorrosive paint all complete to working order.
Supply and install Recessed type ceiling lights with louvered
V 159 mirror type, florescent lamp fitting with

(a) 2'-0" x 1'0"- 2 no 20 watts fluorescent lamps No. 2880.00

(b) 2'-0" x 2'0"- 4 no 20 watts fluorescent lamps No. 3410.00

(c) 2'-0" x 1'0"- 4 no 20 watts fluorescent lamps No. 4530.00

(d) 4'-0" x 1'0"- 2 no 40 watts fluorescent lamps No. 3580.00

(e) 4'-0" x 1'0"- 3 no 40 watts fluorescent lamps No. 5340.00

(f) 4'-0" x 4'0"- 4 no 40 watts fluorescent lamps No. 5985.00


V 160 Supply and installation and connection of 25 x 3mm copper tape L.ft. 475.00
with necessary accessories. Rate shall include for connection of
both ends with brass.

V 161 Supply and installation and connection of 30A - 60A three phase No. 6340.00
with powder coated locable bus bar box including neutral bar and
earth bar.

Engineering organization, W.P. Page 58 BSR 2010


ITEM DESCRIPTION UNIT RATE

V 162 Supply and installation and connection of 100A - 125A three No. 9225.00
phase with powder coated locable bus bar box including neutral
bar and earth bar.

V 163 Supply and installation and connection of 30A - 60A single phase No. 4630.00
with powder coated locable bus bar box including neutral bar and
earth bar.

V 164 Testing of the electrical installation and submission of certificate Item 9000.00
from a chartered Electrical Engineer registerd at CEB.

W - METAL WORK

Note:

Aluminium doors, windows and partitions shall confirm to the


following requirements:

Aluminium alloy should confirm to- BS 1474:1972 Surface


1
treatment shall confirm to BS 1615 and BS 3987

2 Anodized coating thickness should be 15 +/- 5 microns

Minimum section thickness 1.6mm door frame , 1.5 mm


3
window frame and 1.2 mm partition.

Most of the aluminium extrusions available in the Local


Market are being manufactured in Sri Lanka by the
following leading companies and both companies are
changing the extrusion profiles and thicknesses from time to
time. Hence it has become very difficult t o specify standard
4 section sizes that are to be used for door /window frames and
sash members. Hence the rates given herein are based on the
recommended minimum sizes and thicknesses and profiles as
per their hand books published by M/S ALUMAX (PVT)
LTD and by M/S LANKA ALUMINIUM INDUSTRIES
LTD and M/S HEMALCO LTD.

At the time of bidding, all the Bidders shall specifically be


5
requested to submit the following information.

The specifications and thickness of Aluminium extrusions


(a)
bidder proposes to use on the works.

(b) Full size cross sections

Documentary evidence from the Profile Manufacture to the


(c) effect that the proposed profile will serve for the intended
purpose.

A Manufacturer's test certificate be produced as evidence that


(d)
the powder coating is of required thickness.

Engineering organization, W.P. Page 59 BSR 2010


ITEM DESCRIPTION UNIT RATE

6 Physical properties :-

(a) Minimum tensile strength 150 Mpa

(b) Elongation 7%

7 All screws should be stainless steel

But hinges and bar type hinges should be Aluminium or


8
Stainless Steel.

The item descriptions should be read along with the annexed


9 detail drawings. Drawing no:- AR/TYPE PLAN/DOORS &
WINDOWS/2010.07.07/DETAIL 1 - 18 ( Sheet 1 - 18 )

100Door-1.6mm thick,
70 Casement-1.5 mmthick,
80 Sliding-1.5mm thick,
76 Partition 1.2mm thick
Shop drawing should be provided prior to fabrication.

The rates and hence the item description shall include 5mm
10 thick Tinted glass, Neoprene gasket, pop revets, Rawl plugs,
Screws, Aluminium cleats etc.

11 The rates given herein are for Natural aluminium profiles.

For powder coated aluminium profiles (minimum powder


12 coating thickness of 40 + 5 microns) the rates shall be
increased by 15%.

For Bronze anodized aluminium profiles, the rates shall be


13
increased by 5%.

Doors

Openable Single Sash Door (Aluminium Composite Panel &


W 01
Glazed ) with Louvers on Top
Natural aluminium single sash butt hinged openable door with Sq.ft. 1,315.00
middle rail and louvers on top , panelling with two layers of 4mm
thick aluminium composite panel on both side and glazed with
5mm thick tinted glass panes, neoprene and woold beading,
gaskets, pop rivots, threaded bar with nut and approved quality
lock, butt hinges, door handle with cap nut. As per the members ,
sizes and details given in Drawing No:- AR/TYPE
PLAN/DOORS & WINDOWS/2010.07.07/ DETAIL 02 - D1

Engineering organization, W.P. Page 60 BSR 2010


ITEM DESCRIPTION UNIT RATE

W 02 Openable Single Sash Door (Aluminium Composite Panel &


Glazed ) with Fixed Glass on Top
Natural aluminium single sash butt hinged openable door with Sq.ft. 1,230.00
middle rail and fixed glass on top , panelling with two layers of
4mm thick aluminium composite panel on both side and glazed
with 5mm thick tinted glass panes, neoprene and woold beading,
gaskets, pop rivots, threaded bar with nut and approved quality
lock, butt hinges, door handle with cap nut. As per the members ,
sizes and details given in Drawing No:- AR/TYPE
PLAN/DOORS & WINDOWS/2010.07.07/ DETAIL 02 - D2

W 03 Openable Single Sash Door (Aluminium Composite Panel &


Glazed )
Natural aluminium single sash butt hinged openable door with Sq.ft. 1,330.00
middle rail , panelling with two layers of 4mm thick aluminium
composite panel on both side and glazed with 5mm thick tinted
glass panes, neoprene and woold beading, gaskets, pop rivots,
threaded bar with nut and approved quality lock, butt hinges, door
handle with cap nut. As per the members , sizes and details given
in Drawing No:- AR/TYPE PLAN/DOORS &
WINDOWS/2010.07.07/ DETAIL 02 - D3

W 04 Openable Single Sash Door (Fully Glazed ) with Louvers on


Top
Natural aluminium single sash butt hinged openable door with Sq.ft. 930.00
middle rail and louvers on top , glazed with 5mm thick tinted
glass panes, neoprene and woold beading, gaskets, pop rivots,
threaded bar with nut and approved quality lock, butt hinges, door
handle with cap nut. As per the members , sizes and details given
in Drawing No:- AR/TYPE PLAN/DOORS &
WINDOWS/2010.07.07/ DETAIL 03 - D4

W 05 Openable Single Sash Door (Fully Glazed ) with Fixed Glass


on Top
Natural aluminium single sash butt hinged openable door with Sq.ft. 845.00
middle rail and fixed glass on top , glazed with 5mm thick tinted
glass panes, neoprene and woold beading, gaskets, pop rivots,
threaded bar with nut and approved quality lock, butt hinges, door
handle with cap nut. As per the members , sizes and details given
in Drawing No:- AR/TYPE PLAN/DOORS &
WINDOWS/2010.07.07/ DETAIL 03 - D5

W 06 Openable Single Sash Door ( Fully Glazed )

Engineering organization, W.P. Page 61 BSR 2010


ITEM DESCRIPTION UNIT RATE

Natural aluminium single sash butt hinged openable door with Sq.ft. 860.00
middle rail and glazed with 5mm thick tinted glass panes,
neoprene and woold beading, gaskets, pop rivots, threaded bar
with nut and approved quality lock, butt hinges, door handle with
cap nut. As per the members , sizes and details given in Drawing
No:- AR/TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/
DETAIL 03 - D6

Openable Single Sash Door ( Fully panelled with Aluminium


W 07
Composite Panel )
Natural aluminium single sash butt hinged openable door with Sq.ft. 1,795.00
middle rail and fully panelling with two layers of 4mm thick
aluminium composite panel on both side, neoprene and woold
beading, gaskets, pop rivots, threaded bar with nut and approved
quality lock, butt hinges, door handle with cap nut. As per the
members , sizes and details given in Drawing No:- AR/TYPE
PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 04 - D7 &
D8

Sliding Single Sash Door (Aluminium Composite Panel &


W 08
Glazed )
Natural aluminium single sash sliding door with middle rail , Sq.ft. 1,160.00
panelling with two layers of 4mm thick aluminium composite
panel on both side and glazed with 5mm thick tinted glass panes,
neoprene and woold beading, gaskets, pop rivots, threaded bar
with nut roller, flush bolt and approved quality lock , door handle
with cap nut. As per the members , sizes and details given in
Drawing No:- AR/TYPE PLAN/DOORS & WINDOWS/
2010.07.07/ DETAIL 05 - D9

W 09 Sliding Single Sash Door ( Fully Glazed )


Natural aluminium single sash fully glazed sliding door with Sq.ft. 620.00
middle rail , glazed with 5mm thick tinted glass panes, neoprene
and woold beading, gaskets, pop rivots, threaded bar with nut
roller, flush bolt and approved quality lock , door handle with cap
nut. As per the members , sizes and details given in Drawing No:-
AR/TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/
DETAIL 05 - D10

Sliding Single Sash Door ( Fully panelled with Aluminium


W 10
Composite Panel )
Natural aluminium single sash sliding door with middle rail , fully Sq.ft. 1,695.00
panelling with two layers of 4mm thick aluminium composite
panel on both side, neoprene and woold beading, gaskets, pop
rivots, threaded bar with nut roller, flush bolt and approved
quality lock , door handle with cap nut. As per the members ,
sizes and details given in Drawing No:- AR/TYPE
PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 05 - D11

Engineering organization, W.P. Page 62 BSR 2010


ITEM DESCRIPTION UNIT RATE

Openable Double Sash Door (Aluminium Composite Panel &


W 11
Glazed ) with Fixed Glass on Top
Natural aluminium double sash butt hinged openable door with Sq.ft. 1,295.00
middle rail and fixed glass on top , panelling with two layers of
4mm thick aluminium composite panel on both side and glazed
with 5mm thick tinted glass panes, neoprene and woold beading,
gaskets, pop rivots, threaded bar with nut and approved quality
lock, butt hinges, door handle with cap nut. As per the members ,
sizes and details given in Drawing No:- AR/TYPE
PLAN/DOORS & WINDOWS/2010.07.07/ DETAIL 06 - D12

Openable Double Sash Door (Aluminium Composite Panel &


W 12
Glazed ) with Louvers on Top
Natural aluminium double sash butt hinged openable door with Sq.ft. 1,320.00
middle rail and louvers on top , panelling with two layers of 4mm
thick aluminium composite panel on both side and glazed with
5mm thick tinted glass panes, neoprene and woold beading,
gaskets, pop rivots, threaded bar with nut and approved quality
lock, butt hinges, door handle with cap nut. As per the members ,
sizes and details given in Drawing No:- AR/TYPE
PLAN/DOORS & WINDOWS/2010.07.07/ DETAIL 06 - D13

Openable Double Sash Door (Aluminium Composite Panel &


W 13
Glazed )
Natural aluminium double sash butt hinged openable door with Sq.ft. 1,390.00
middle rail , panelling with two layers of 4mm thick aluminium
composite panel on both side and glazed with 5mm thick tinted
glass panes, neoprene and woold beading, gaskets, pop rivots,
threaded bar with nut and approved quality lock, butt hinges, door
handle with cap nut. As per the members , sizes and details given
in Drawing No:- AR/TYPE PLAN/DOORS &
WINDOWS/2010.07.07/ DETAIL 06 - D14

Openable Double Sash Door (Fully Glazed ) with Fixed Glass


W 14
on Top
Natural aluminium double sash butt hinged openable door with Sq.ft. 840.00
middle rail and fixed glass on top , fully glazed with 5mm thick
tinted glass panes, neoprene and woold beading, gaskets, pop
rivots, threaded bar with nut and approved quality lock, butt
hinges, door handle with cap nut. As per the members , sizes and
details given in Drawing No:- AR/TYPE PLAN/DOORS &
WINDOWS/2010.07.07/ DETAIL 07 - D15

Engineering organization, W.P. Page 63 BSR 2010


ITEM DESCRIPTION UNIT RATE

Openable Double Sash Door (Fully Glazed ) with Louvers on


W 15
Top
Natural aluminium double sash butt hinged openable door with Sq.ft. 905.00
middle rail and louvers on top , fully glazed with 5mm thick tinted
glass panes, neoprene and woold beading, gaskets, pop rivots,
threaded bar with nut and approved quality lock, butt hinges, door
handle with cap nut. As per the members , sizes and details given
in Drawing No:- AR/TYPE PLAN/DOORS &
WINDOWS/2010.07.07/DETAIL 07 - D16

W 16 Openable double Sash Door ( Fully Glazed )


Natural aluminium double sash butt hinged openable door with Sq.ft. 885.00
middle rail and fully glazed with 5mm thick tinted glass panes,
neoprene and woold beading, gaskets, pop rivots, threaded bar
with nut and approved quality lock, butt hinges, door handle with
cap nut. As per the members , sizes and details given in Drawing
No:- AR/TYPE PLAN/DOORS & WINDOWS/
2010.07.07/DETAIL 07 - D17

Sliding Double Sash Door (Aluminium Composite Panel &


W 17
Glazed )
Natural aluminium double sash sliding door with middle rail , Sq.ft. 1150.00
panelling with two layers of 4mm thick aluminium composite
panel on both side and glazed with 5mm thick tinted glass panes,
neoprene and woold beading, gaskets, pop rivots, threaded bar
with nut roller, flush bolt and approved quality lock , door handle
with cap nut. As per the members , sizes and details given in
Drawing No:- AR/TYPE PLAN/DOORS & WINDOWS/
2010.07.07/DETAIL 08 - D18

Sliding Double Sash Door ( Fully Glazed ) with Fixed Glass on


W 18
Top
Natural aluminium double sash fully glazed sliding door with Sq.ft. 590.00
middle rail , fully glazed with 5mm thick tinted glass panes,
neoprene and woold beading, gaskets, pop rivots, threaded bar
with nut roller, flush bolt and approved quality lock , door handle
with cap nut. As per the members , sizes and details given in
Drawing No:- AR/TYPE PLAN/DOORS & WINDOWS/
2010.07.07/DETAIL 08 - D19

Engineering organization, W.P. Page 64 BSR 2010


ITEM DESCRIPTION UNIT RATE

Openable Single Sash Door for Toilets ( with Aluminium


W 19
Sheet )
Natural aluminium single sash butt hinged openable door with Sq.ft. 650.00
middle rail and gauge 24 aluminium sheet, neoprene and woold
beading, gaskets, pop rivots, threaded bar with nut and approved
quality lock, butt hinges, door handle with cap nut. As per the
members , sizes and details given in Drawing No:- AR/TYPE
PLAN/DOORS & WINDOWS/2010.07.07/ DETAIL 04 - D20

Windows

W 20 Casement Window with Louvers on Top ( 1 Bay )


Natural aluminium casement window single sash with louvers on Sq.ft. 1120.00
top, consisting of 5mm thick glass panes, casement lock, pull
rings , screws, pop rivots, gaskets, door hinge, weather strip
etc.As per the members , sizes and details given in Drawing No:-
AR/TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/DETAIL
09 - W1

W 21 Casement Window with Fixed Glass on Top ( 1 Bay )


Natural aluminium casement window single sash with fixed glass Sq.ft. 1055.00
on top, consisting of 5mm thick glass panes, casement lock,
screws, pop rivots, gaskets, door hinge, weather strip etc.As per
the members , sizes and details given in Drawing No:- AR/TYPE
PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 09 - W2

W 22 Casement Window ( 1 Bay )


Natural aluminium casement window single sash , consisting of Sq.ft. 1,025.00
5mm thick glass panes, casement lock, screws, pop rivots,
gaskets, door hinge, weather strip etc.As per the members , sizes
and details given in Drawing No:- AR/TYPE PLAN/ DOORS &
WINDOWS/2010.07.07/DETAIL 09 - W3

W 23 Casement Window with Louvers on Top ( 2 Bays )


Natural aluminium casement window double sash with louvers on Sq.ft. 990.00
top, consisting of 5mm thick glass panes, casement lock, screws,
pop rivots, gaskets, door hinge, weather strip etc.As per the
members , sizes and details given in Drawing No:- AR/TYPE
PLAN/ DOORS & WINDOWS/2010.07.07/ DETAIL 10 - W4

Engineering organization, W.P. Page 65 BSR 2010


ITEM DESCRIPTION UNIT RATE

W 24 Casement Window with Fixed Glass on Top ( 2 Bays )


Natural aluminium casement window double sash with fixed glass Sq.ft. 910.00
on top, consisting of 5mm thick glass panes, casement lock,
screws, pop rivots, gaskets, door hinge, weather strip etc.As per
the members , sizes and details given in Drawing No:- AR/TYPE
PLAN/ DOORS & WINDOWS/2010.07.07/ DETAIL 10 - W5

W 25 Casement Window ( 2 Bays )


Natural aluminium casement window double sash , consisting of Sq.ft. 890.00
5mm thick glass panes, casement lock, screws, pop rivots,
gaskets, door hinge, weather strip etc. As per the members , sizes
and details given in Drawing No:- AR/TYPE PLAN/ DOORS &
WINDOWS/2010.07.07/ DETAIL 10 - W6

W 26 Sliding Window with Louvers on Top ( 2 Bays )


Natural aluminium sliding window with louvers on top consisting Sq.ft. 905.00
of 5mm thick glass panes , lock, roller, screws, gaskets, nut felt,
pop rivots, cap, plastic guide etc. As per the members , sizes and
details given in Drawing No:- AR/TYPE PLAN/DOORS &
WINDOWS/ 2010.07.07/ DETAIL 11 - W7

W 27 Sliding Window with Fixed Glass on Top ( 2 Bays )


Natural aluminium sliding window with fixed glass on top Sq.ft. 815.00
consisting of 5mm thick glass panes , lock, roller, screws,
gaskets, nut felt, pop rivots, cap, plastic guide etc. As per the
members , sizes and details given in Drawing No:- AR/TYPE
PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 11 - W8

W 28 Sliding Window ( 2 Bays )


Natural aluminium sliding window ,consisting of 5mm thick glass Sq.ft. 730.00
panes , lock, roller, screws, gaskets, nut felt, pop rivots, cap,
plastic guide etc. As per the members , sizes and details given in
Drawing No:- AR/ TYPE PLAN/ DOORS & WINDOWS/
2010.07.07/ DETAIL 11 - W9

W 29 Casement Window with Louvers on Top ( 3 Bays )


Natural aluminium casement window with louvers on top, Sq.ft. 985.00
consisting of 5mm thick glass panes, casement lock, screws, pop
rivots, gaskets, door hinge, weather strip etc.As per the members ,
sizes and details given in Drawing No:- AR/ TYPE
PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 12 - W10

Engineering organization, W.P. Page 66 BSR 2010


ITEM DESCRIPTION UNIT RATE

W 30 Casement Window with Fixed Glass on Top ( 3 Bays )


Natural aluminium casement window with fixed glass on top, Sq.ft. 895.00
consisting of 5mm thick glass panes, casement lock, screws, pop
rivots, gaskets, door hinge, weather strip etc.As per the members ,
sizes and details given in Drawing No:- AR/ TYPE
PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 12 - W11

W 31 Casement Window ( 3 Bays )


Natural aluminium casement window, consisting of 5mm thick Sq.ft. 865.00
glass panes, casement lock, screws, pop rivots, gaskets, door
hinge, weather strip etc. As per the members , sizes and details
given in Drawing No:- AR/ TYPE PLAN/DOORS &
WINDOWS/ 2010.07.07/ DETAIL 12 - W12

W 32 Sliding Window with Louvers on Top ( 3 Bays )


Natural aluminium sliding window with louvers on top consisting Sq.ft. 870.00
of 5mm thick glass panes , lock, roller, screws, gaskets, nut felt,
pop rivots, cap, plastic guide etc. As per the members , sizes and
details given in Drawing No:- AR/ TYPE PLAN/DOORS &
WINDOWS/ 2010.07.07/ DETAIL 13 - W13

W 33 Sliding Window with Fixed Glass on Top ( 3 Bays )


Natural aluminium sliding window with fixed glass on top Sq.ft. 840.00
consisting of 5mm thick glass panes , lock, roller, screws,
gaskets, nut felt, pop rivots, cap, plastic guide etc. As per the
members , sizes and details given in Drawing No:- AR/ TYPE
PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 13 - W14

W 34 Sliding Window ( 3 Bays )


Natural aluminium sliding window ,consisting of 5mm thick glass Sq.ft. 815.00
panes , lock, roller, screws, gaskets, nut felt, pop rivots, cap,
plastic guide etc. As per the members , sizes and details given in
Drawing No:- AR/ TYPE PLAN/DOORS & WINDOWS/
2010.07.07/ DETAIL 13 - W15

Engineering organization, W.P. Page 67 BSR 2010


ITEM DESCRIPTION UNIT RATE

Top Hung Casement Window with Fixed Louvers on Top &


W 35
Fixed Glass at Bottom (3 Bays )
Natural aluminium top hung casement window with fixed glass Sq.ft. 1,030.00
on top and fixed glass at bottom, consisting of 5mm thick glass
panes, casement lock, screws, pop rivots, gaskets, door hinge,
weather strip etc.As per the members , sizes and details given in
Drawing No:- AR/ TYPE PLAN/DOORS & WINDOWS/
2010.07.07/ DETAIL 14 - W16

Top Hung Casement Window with Fixed Louvers on Top &


W 36
Fixed Glass at Bottom (2 Bays )
Natural aluminium top hung casement window with fixed glass Sq.ft. 1,000.00
on top and fixed glass at bottom, consisting of 5mm thick glass
panes, casement lock, screws, pop rivots, gaskets, door hinge,
weather strip etc.As per the members , sizes and details given in
Drawing No:- AR/ TYPE PLAN/DOORS & WINDOWS/
2010.07.07/ DETAIL 14 - W17

W 37 Casement Window with Louvers on Top ( 4 Bays )


Natural aluminium casement window with louvers on top, Sq.ft. 860.00
consisting of 5mm thick glass panes, casement lock, screws, pop
rivots, gaskets, door hinge, weather strip etc.As per the members ,
sizes and details given in Drawing No:- AR/ TYPE
PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 15 - W18

W 38 Casement Window with Fixed Glass on Top ( 4 Bays )


Natural aluminium casement window with fixed glass on top, Sq.ft. 735.00
consisting of 5mm thick glass panes, casement lock, screws, pop
rivots, gaskets, door hinge, weather strip etc.As per the members ,
sizes and details given in Drawing No:- AR/ TYPE
PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 15 - W19

W 39 Louver Panel 1
Natural aluminium framed lovers, consisting of screws, pop Sq.ft. 685.00
rivots, etc. As per the members , sizes and details given in
Drawing No:- AR/ TYPE PLAN/DOORS & WINDOWS/
2010.07.07/ DETAIL 16 - W20

W 40 Louver Panel 2
Natural aluminium framed lovers, consisting of screws, pop Sq.ft. 555.00
rivots, etc. As per the members , sizes and details given in
Drawing No:- AR/ TYPE PLAN/DOORS & WINDOWS/
2010.07.07/ DETAIL 16 - W21

Engineering organization, W.P. Page 68 BSR 2010


ITEM DESCRIPTION UNIT RATE

W 41 Top Hung Fanlight with Lover panel on top


Natural aluminium top hung type fanlight with louver on top Sq.ft. 1,290.00
consisting of locks, screws, pop rivots, gaskets, door hinge,
weather strip etc. As per the members , sizes and details given in
Drawing No:- AR/ TYPE PLAN/DOORS & WINDOWS/
2010.07.07/ DETAIL 17 - FL1

W 42 Top Hung Fanlight with Fixed Glass on top


Natural aluminium top hung type fanlight with fixed glass on top Sq.ft. 1,165.00
consisting of locks, screws, pop rivots, gaskets, door hinge,
weather strip etc. As per the members , sizes and details given in
Drawing No:- AR/ TYPE PLAN/DOORS & WINDOWS/
2010.07.07/ DETAIL 17 - FL2

W 43 Centre Pivot Fanlight with Lover panel on top


Natural aluminium centre pivot type fanlight with louver on top Sq.ft. 1,370.00
consisting of locks, screws, pop rivots, gaskets, door hinge,
weather strip etc. As per the members , sizes and details given in
Drawing No:- AR/ TYPE PLAN/DOORS & WINDOWS/
2010.07.07/ DETAIL 17 - FL3

W 44 Top Hung Fanlight with Fixed Glass on top


Natural aluminium centre pivot type fanlight with fixed glass on Sq.ft. 1,200.00
top consisting of locks, screws, pop rivots, gaskets, door hinge,
weather strip etc. As per the members , sizes and details given in
Drawing No:- AR/ TYPE PLAN/DOORS & WINDOWS/
2010.07.07/ DETAIL 17 - FL4

W 45 Top Hung Fanlight ( 3 bays )


Natural aluminium top hung type fanlight 3 bays, consisting of Sq.ft. 740.00
locks, screws, pop rivots, gaskets, door hinge, weather strip etc.
As per the members , sizes and details given in Drawing No:- AR/
TYPE PLAN/DOORS & WINDOWS/ 2010.07.07/ DETAIL 18 -
FL5

W 46 Top Hung Fanlight ( 2 Bays + 1 Bay )


Natural aluminium top hung type fanlight 2 bays + 1 bay, Sq.ft. 755
consisting of locks, screws, pop rivots, gaskets, door hinge,
weather strip etc. As per the members , sizes and details given in
Drawing No:- AR/ TYPE PLAN/DOORS & WINDOWS/
2010.07.07/ DETAIL 18 - FL6

Fixed Glazed Window


W 47 Natural aluminium fixed glaxed window with 5mm thick tinted Sq.ft. 550.00
glazed and screws, pop rivots, gasket and wool felt etc.

Engineering organization, W.P. Page 69 BSR 2010


ITEM DESCRIPTION UNIT RATE

Fully Board Partition with Emboss Decorative Plywood


W 48 Natural aluminium partition frame top and bottom with 2.5mm Sq.ft. 260.00
thick emboss laminated plywood boarding both side kept back to
back ( Total thickness 5mm ) with necessary pop rivots, gasket
and GI channels & etc. work complete in order.
W 49 Natural aluminium partition frame top and bottom with 3mm Sq.ft. 275.00
thick emboss decorative plywood boarding both side kept back to
back ( Total thickness 6mm ) with necessary pop rivots, gasket
and GI channels & etc. work complete in order.

Full Board Partition with Aluminium Composite Panel

W 50 Natural aluminium partition frame top and bottom with 4mm Sq.ft. 1870.00
thick pvdf coated aluminium composite both side kept back to
back ( Total thickness 8mm ) with necessary pop rivots, gasket
and GI channels & etc. work complete in order.
W 51 Natural aluminium partition frame top and bottom with 4mm Sq.ft. 800.00
thick polyester coated aluminium composite both side kept back
to back ( Total thickness 8mm ) with necessary pop rivots, gasket
and GI channels & etc. work complete in order.

Glazed & Board Partition with Emboss Decorative Plywood


& 5mm Tinted Glass
W 52 Natural aluminium partition frame top part with 5mm thick tinted Sq.ft. 350.00
glass and bottom part with 2.5mm thick emboss laminated
plywood boarding both side kept back to back ( Total thickness
5mm ) with necessary pop rivots, gasket and GI channels & etc.
work complete in order.
W 53 Natural aluminium partition frame top part with 5mm thick tinted Sq.ft. 360.00
glass and bottom part with 3mm thick emboss decorative
plywood boarding both side kept back to back ( Total thickness
6mm ) with necessary pop rivots, gasket and GI channels & etc.
work complete in order.
W 54 Natural aluminium partition frame top & bottom part with Sq.ft. 320.00
2.5mm thick emboss laminated plywood boarding both side kept
back to back ( Total thickness 5mm ) and middle part with 5mm
thick tinted glass with necessary pop rivots, gasket and GI
channels & etc. work complete in order.
W 55 Natural aluminium partition frame top & bottom part with 3mm Sq.ft. 330.00
thick emboss decorative plywood boarding both side kept back to
back ( Total thickness 6mm ) and middle part with 5mm thick
tinted glass with necessary pop rivots, gasket and GI channels &
etc. work complete in order.

Engineering organization, W.P. Page 70 BSR 2010


ITEM DESCRIPTION UNIT RATE

Fully Glazed Partition with 5mm Tinted Glass


W 56 Natural aluminium partition frame top and bottom with 5mm Sq.ft. 360.00
thick tinted glass with necessary pop rivots, gasket & etc. work
complete in order.

Gypsum Board Partition


W 57 Fabricating and installing gypsum board partitioning with Sq.ft. 315.00
necessary GI channel member frame work fixed on to wall and
floors and 9mm thick gypsum board fixed to both sides of the
frame work all completed with board joints taped and finished
with gypsum compound to get wall finish. Rate to include for
applying one coat of Acrylic filler to boards.

Door Pull Handle


W 58 Supplying and fixing " Hexzagon type "stainless steel door pull No. 3650.00
handle fixed complete to working order.(12" )

Door closer
W 59 Supplying & fixing of heavy duty door closer of approved quality No. 5685.00
( "Union" brand or equivalent ) and fixing to doors including all
connecting works and making good after completion. (Guarantee
Card from the local agent should be provided prior to installation)

CEINING
W 60 Supply and installation of Concealed type metal false ceiling of Sq.ft. 400.00
600mm x 600mm out of 0.5mm average thickness epoxy powder
painted steel sheets ( Paint film thickness of average 80 microns )
suspended to the roof frame work with hot dip galvanized " T "
bars of 14mm x 38mm and wall angles of 19mm x 24mm
suspended with 4mm dia. galvanized hanger rods.

W 61 Supply and installation of Exposed grid type metal false ceiling Sq.ft. 375.00
of 600mm x 600mm out of 0.5mm average thickness epoxy
powder painted steel sheets ( Paint film thickness of average 80
microns ) suspended to the roof frame work with hot dip
galvanized " T " bars of 14mm x 38mm and wall angles of 19mm
x 24mm suspended with 4mm dia. galvanized hanger rods.

Engineering organization, W.P. Page 71 BSR 2010


ITEM DESCRIPTION UNIT RATE

IRON GRILL
W 62 Welded, Diamond shaped Iron grill, consisting 20mm x 6mm flat Sq.ft. 330.00
iron frame, 6mm dia M.S. rods at 3" centers to form 3"x6"
diamond shape grill Rate shall include for fixing with No.10, 1"
counter sunk iron screws and applying two coats of anti-
Corrosive paint. (Based on 2'-0"x4'-0" area)
W 63 Welded, Diamond shaped Iron grill, consisting 20mm x 5mm flat Sq.ft. 275.00
iron frame, 5mm dia M.S. rods at 3" centers to form 3"x6"
diamond shape grill Rate shall include for fixing with No.10, 1"
counter sunk iron screws and applying two coats of anti-
Corrosive paint. (Based on 2'-0"x4'-0" area)
W 64 Welded Diamond shaped iron grill, consisting 20mm x 6mm flat Sq.ft. 240.00
iron frame without joints, 20mm x 6mm mullions without joints,
20mm x 6mm isolated mid rails, 6mm dia. M.S. rods welded to
form 3" x 6" diamond shaped isolated paneles. Rate shall include
for fixing with No.10, 1" counter sunk iron screws and applying
two coats of anti- Corrosive paint. (Based on 9'-0"x6'-0" area)

W 65 Welded Diamond shaped iron grill, consisting 20mm x 5mm flat Sq.ft. 190.00
iron frame without joints, 20mm x 5mm mullions without
joints, 20mm x 5mm isolated mid rails,5mm dia. M.S. rods
welded to form 3"x6" diamond shaped isolated paneles. Rate shall
include for fixing with No.10, 1" counter sunk iron screws and
applying two coats of anti- Corrosive paint. (Based on 9'-0"x6'-
0" area)

W 66 Mild steel door 3'-0"x9"-0" high overall with 2'-3" high Iron grill Sq.ft. 570.00
on top consisting 1 1/2"x1 1/2"x4mm thick angle Iron door
frame, 1/4" dia. mild steel grill on top (3"x6" diamond shape),
1"x1" M.S. Hollow section outer frame in sash with 2 No.
1"x1"x 3mm thick angle iron mid rail at 3'-0" hight, sheet gage
22 G.I. bottom panell, 6mm dia. mild steel rod grill on top panell
, (3"x6" diamond shape)fix complete with 3No. 4"x4" M-S Butt
Hinges tower bolt and Hasp and plate. Rate shall include for
applying two coats of anti-Corrosive paint.

W 67 Welded Diamond shaped iron grill, consisting 1" x 1" x 3mm Sq.ft. 380.00
angle iron frame 20mm x 6mm Mullions at 2'-0" centres.6mm
dia. MS rods welded together to form 3" x 6" Diamond shape
grill. Rate shall include for fixing with No.10, 1" counter sunk
iron screws and applying two coats of anti-corrosive paint.
W 68 Welded Diamond shaped iron grill, consisting 1" x 1" x 3mm Sq.ft. 345.00
angle iron frame 20mm x 5mm Mullions at 2'-0" centres.5mm
dia. MS rods welded together to form 3" x 6" Diamond shape
grill. Rate shall include for fixing with No.10, 1" counter sunk
iron screws and applying two coats of anti-corrosive paint.

Engineering organization, W.P. Page 72 BSR 2010


ITEM DESCRIPTION UNIT RATE

W 69 Welded Iron grill of rectangular pattern , consisting of a flat Iron Sq.ft. 560.00
frame of 25mm x 6mm with out intermediate joints, 2 nos of
25mm x 6mm horizontal members , 12mm dia. M.S. round bars
as vertical members @ 4" c/c , vertical round bars to be drilled
through horizontal flat Irons, fixed complete with counter sunk
screws and rawl plugs to the masonry opening or timber. Rate
shall include for applying two coats of anti-corrosive paint and
two coats of enamal paint. ( for window openings of size 4'-0" x
2'-0" ). Details as per the Drawing No:- AR/DETAIL
DRG/2010/01/10 & Sheet No. 05

COLLAPSIBLE DOOR
W 70 Fabricating and Installation of open type collapsible Iron door Sq.ft. 1100.00
consisting with 20mm x 6mm flat iron codling cover and
necessary screws, etc.. Rate shall include for applying two coats
of anti-corrosive paint.

ROLLER SHUTTERS & ROLLER DOORS


W 71 Supply and fixing natural aluminium roller shutter consisting Sq.ft. 625.00
aluminium slats to the thickness of 1.2mm, centre bar, pulleys,
side plate with the racers, fabricating the mechanical box with
M.S. square tubes and covering the box and fixing on site with
the bottom bars and necessary U channels. ( Approx. Size: 10'-6"
width x 9'-8" high )

W 72 Supply and fixing powder coated zink alum roller doors Sq.ft. 625.00
consisting heavy duty powder coated aluminium slats bearing a
thickness of 1.2mm and height of the slat to be 83mm, centre bar,
pulleys, springs, dust seal, nylon strip, side plate with the racers
& work complete in order.

W 73 Supply and fixing the motor with two remotes for the roller Item 32400.00
shutter & roller door.

MILD STEEL BALUSTRADE


W 74 Supplying , fabricating & fixing mild steel and timber hand L.ft. 1805.00
rail, consisting of 16mm M.S. round bars @ 4" c/c as
vertical members fixed to steps with the 8" x 1 1/2" x 1/2"
thick M.S. plate connecting with 2 nos of 10mm anchor
bolts, 4" x 2" approved timber rail fixed to 30mm x 6mm
flat iron aling to the stair & 20mm x 6mm flat iron as the
horizontal members to connecting the two vertical members
finished smooth and work complete in order with necessary
nuts & bolts. Rate Shall include for applying two coats of
anti-corrosive paint and two coats of enamel paints. All
sizes & details as per Drawing No:- AR/DETAIL
DRG/2010/01/10 & Sheet No. 03 - Type 1-A

Engineering organization, W.P. Page 73 BSR 2010


ITEM DESCRIPTION UNIT RATE

W 75 Supplying , fabricating & fixing mild steel and timber hand L.ft. 1975.00
rail, consisting of 16mm M.S. round bars @ 4" c/c as
vertical members fixed to steps with the 8" x 1 1/2" x 1/2"
thick M.S. plate connecting with 2 nos of 10mm anchor
bolts, 4" x 2" approved timber decorative rail fixed to
30mm x 6mm flat iron aling to the stair & 20mm x 6mm flat
iron as the horizontal members to connecting the two
vertical members finished smooth and work complete in
order with necessary nuts & bolts. Rate Shall include for
applying two coats of anti-corrosive paint and two coats of
enamel paints. All sizes and details as per Drawing No:-
AR/DETAIL DRG/2010/01/10 & Sheet No. 03 - Type 1-B
W 76 Supplying , fabricating & fixing GI pipe hand rail, consisting L.ft. 1690.00
of 2" dia. GI pipe as hand rail and 3/4" dia. GI pipes @ 11"
c/c as vertical members fixed to steps with the 4" x 1 1/2" x
1/2" thick M.S. plate connecting with 2 nos of 10mm
anchor bolts, work complete in order with necessary nuts &
bolts. Rate Shall include for applying two coats of anti-
corrosive paint and two coats of enamel paints. All sizes
and details as per Drawing No:- AR/DETAIL
DRG/2010/01/10 & Sheet No. 04 - Type 2
W 77 Supplying , fabricating & fixing GI pipe hand rail top of the L.ft. 650.00
9" thick brick wall ( Brick work measured separately )
consisting of 2" dia. GI pipe as hand rail and fixed to wall
with 30mm x 6mm flat iron @ 18" c/c work complete in
order. Rate Shall include for applying two coats of anti-
corrosive paint and two coats of enamel paints. All sizes
and details as per Drawing No:- AR/DETAIL
DRG/2010/01/10 & Sheet No. 04 - Type 3
W 78 Fabricate, supply and fix stainless steel pipe hand rail at L.ft. 3700.00
staircase comprising 1 1/4" dia. uprights at 1'-0" c/c, 2" dia.
top rail and 1" dia. middle rail. Uprights fixed to steps
with 100 x 100 x 8mm thick S.S. base plate with 8mm dia.
S.S. nuts and bolts complete as per working order.

Y - STRUCTURAL STEEL WORK


Y 01 Supplying and fixing 2" x 2" x 5mm angle iron purling at L.ft. 245.00
maximum spacing of 4'-0" centers upto maximum span of
10'-0" including nuts, necessary bolds & washers etc. and
application of two coats of anti-Corrosive paint.

Y 02 Supplying and fixing 2 1/2" x 2 1/2" x 5mm angle iron purling at L.ft. 285.00
maximum spacing of 4'-0" centers maximum span of 11'-0" (not
less than 10'-0") for a asbestos purling roof without covering tiles
on top. Rate shall include for necessary nuts, bolds &
washers,etc. applying two coats of anti-Corrosive paint.

Engineering organization, W.P. Page 74 BSR 2010


ITEM DESCRIPTION UNIT RATE

Y 03 Supplying and fixing 3" x 3" x 5mm angle iron purling at L.ft. 375.00
maximum spacing of 4'-0" centers maximum span of 12'-0" (not
less than 11'-0") for a asbestos purling roof without covering tiles
on top. Rate shall include necessary nuts, olds & washers etc. ,
applying two coats of anti -Corrosive paint.
Y 04 Supplying and fixing 4" x 2" x 6mm channel Iron purling L.ft. 532.00
including two coats of anticorrosive paint up to 14'-0" span at
4'-0" c/c
Y 05 Supplying and fixing 5" x 2 1/2" x 6mm chanel Iron purling to L.ft. 860.00
existing Roof frame work , including two coats of anti-corrosive
paint up to 16'-0" span, at 4'-0" c/c.

Y 06 Supplying and fixing 6" x 3" x 6mm channel Iron purling to L.ft. 1010.00
existing Roof frame work , including two coats of anti-corrosive
paint up to 18'-0" span at 4'-0"c/c.

Y 07 Supply and fixing double angles welded back to back as sleepers L.ft. 550.00
size 2" x 2" x 6mm ; Rate to include for two coats of anti-
corrosive paint and one coat of enamel paint.

Y 08 Supply and fixing double angles welded back to back as sleepers L.ft. 650.00
size 2 1/2" x 2 1/2" x 6mm ; Rate to include for two coats of anti-
corrosive paint and one coat of enamel paint.

Y 09 Supply and fixing double angles welded back to back as sleepers L.ft. 830.00
size 3" x 3" x 6mm ; Rate to include for two coats of anti-
corrosive paint and one coat of enamel paint.

Mild steel Roof truss


Y 10 Mild steel Roof truss for Calicut tile roofing (Maximum spacing No. 45000.00
10'-0" ), 20'-0" span centre to centre, 25 pitch maximum and 18
pitch minimum with 4'-0" wide eaves at both sides, consisting of 2
No. 2" x 2" x 6mm angles as top and bottom chords. Rate shall
include for struts and ties, gusset plates, base plates, sole plates,
mild steel rag bolts, purling cleats & etc.. fabricating ,
transporting , hoisting , fixing in position and applying two coats
of Zinc Phosphate paint, all details as per Drawing no:-
WP/TYPE/STR/2010/RT1

Y 11 Mild steel Roof truss for Asbestos roofing (Maximum spacing No. 43000.00
10'-0" ), 6 m (20'-0") span centre to centre, 12 pitch , with 4'-0"
wide eaves at both sides, consisting of 2 No. 2" x 2" x 6mm
angles as top and bottom chords. Rate shall include for struts and
ties, gusset plates, base plates, sole plates, mild steel rag bolts,
purling cleats & etc.. fabricating , transporting , hoisting , fixing
in position and applying two coats of Zinc Phosphate paint, all
details as per Drawing no:-WP/TYPE/STR/2010/RT2

Engineering organization, W.P. Page 75 BSR 2010


ITEM DESCRIPTION UNIT RATE

Y 12 Mild steel Roof truss for Calicut tile roofing(Maximum spacing No. 49000.00
10'-0") 25'-0", span centre to centre 25 pitch maximum and 18
pitch minimum with 4'-0" wide eaves at both sides, consisting of 2
No. 2" x 2" x 6mm angles as top and bottom chords, 1 No. 2" x
2" x 6mm angles as struts and ties, 1/4" thick gusset plates, 3/8"
thick. base plates, 3/4" dia M.S. Rag bolts of 12" long , 3" x 3" x
6mm size 1'-0" long purling cleats at 3'-6" centers and 2" x 2" x
16mm thick spacers at 2'-0" centers. Rate shall include for
fabricating, transport, hoisting, fixing in position, and applying
two coats of Zinc Phosphate paint. As per detail drg. No. 1190
school work branch.

Y 13 Mild steel Roof truss for Asbestos roofing (Maximum spacing No. 45000.00
10'-0" ), 7.5 m (25'-0") span centre to centre, 12 pitch , with 4'-0"
wide eaves at both sides, consisting of 2 No. 2
1/2" x 2 1/2" x 6mm angles as top and bottom chords. Rate shall
include for struts and ties, gusset plates, base plates, sole plates,
mild steel rag bolts, purling cleats & etc.. fabricating ,
transporting , hoisting , fixing in position and applying two coats
of Zinc Phosphate paint, all details as per Drawing no:-
WP/TYPE/STR/2010/RT3

Y 14 Mild steel roof truss for Asbestos roofing 9 m (30'-0") span , 12 No. 78000.00
pitch, comprising of 2 No. 65 x 65 x 6mm double angles as top
and bottom welded with M.S. Plate of 65 x 65 x 8mm at 600mm
intervals, and web member comprising of double angle of sizes 65
x 65 x 6mm and 50 x 50 x 6mm connected with 8mm thick mild
steel gusset plate and 10mm thick base plate of 225 x 225 on
either side and 10mm thick vertical gusset plate at the ends,
20mm dia. M.S. rag bolts of 400mm long. Rate shall include for
fabricating, transport, hoisting, fixing in position, and including 2
coats of Zinc Phosphate paint and two coats of enamel paint. As
per Drawing No. 1732 of School Work Division of Ministry of
Education

Y 15 Mild steel roof truss for Calicut tile roofing 30'-0" span , 25 No. 82000.00
pitch maximum and 18 pitch minimum, consisting of 2 No.
2 1/2" x 2 1/2" x 6mm angles as top and bottom chords. Rate
shall include for struts and ties, gusset plates, base plates, sole
plates, mild steel rag bolts, purling cleats & etc.. fabricating ,
transporting , hoisting , fixing in position and applying two coats
of Zinc Phosphate paint, all details as per Drawing no:-
WP/TYPE/STR/2010/RT4

Steel Scaffolding Set


Y 16 Supplying and erecting steel scaffolding sets. Rate to include for Set per day 80.00
dismantling same after completion of work.

Engineering organization, W.P. Page 76 BSR 2010


ITEM DESCRIPTION UNIT RATE

Zinc Alum Roofing


Y 17 Supplying and fixing zinc aluminium color bond standard ridge L.ft. 310.00
cap to existing sheet roof using new fasteners.

Y 18 Supply and fix proprietary coated zincalum gutter (minimum base L.ft. 525.00
metal thickness of sheet 0.4mm and minimum total thickness
0.47mm) complete with end caps, running joints etc. All joints to
be properly connected with an adequate side laps not less than
225mm length and with sealant to ensure water tightness along
the entire length of the gutter and including angle iron gutter
brackets 25x25x3mm at 450mm centers with an adequate slope
as directed and including application of two coats of each
anticorrosive paint and enamel paint to all steel surfaces to match
the gutter fix in position.( Inner size of 150mm x 175mm )

Y 19 Supply and fix proprietary coated zincalum square down pipe L.ft. 460.00
(minimum base metal thickness of sheet 0.4mm and minimum
total thickness 0.47mm) complete with necessary socket , elbow
& bend. All joints to be properly connected and with sealant to
ensure water tightness along the entire length. Down pipe brackets
@ 1.0m c/c .

Y 20 Color bonded wall cladding 0.40mm thick fixed to external wall Sq.ft. 285.00
boxed out at down pipes including sills, flashing, removable
sections at access points such as cleaning eyes etc. completely
covering the surface as directed by the Engineer.

Y 21 Supply and fix Composite wall clading of 0.4mm thickness Sq.ft. 625.00
including inner frame work to vertical walls up to 30'-0". Rate
shall include for scaffolding.

Y 22 Supply and lay double sided 3mm thick aluminium foil heat Sqr. 6310.00
reflecting material to underside of roof supported with Gauge 10,
2" x 2" GI mesh.

Y 23 Supply and fix zinc alum profile roofing sheet (minimum base Sqr. 16750.00
metal thickness of 0.4mm) and minimum thickness of 0.47mm,
laid on existing purlings with joints to be properly connected with
an adequate side lap to ensure water tightness along the entire
length and complete to working order.
Y 24 Supply and fixing high tensile Galvanized iron "C" channels of L.ft. 335.00
100 x 50 x 15 x 2.0mm thick

Y 25 Supply and fixing high tensile Galvanized iron "C" channels of L.ft. 385.00
125 x 60 x 20 x 2.0mm thick

Y 26 Supply and fixing high tensile Galvanized iron "C" channels of L.ft. 420.00
150 x 65 x 20 x 2.0mm thick

Engineering organization, W.P. Page 77 BSR 2010


ITEM DESCRIPTION UNIT RATE

Z - MAINTANANCE WORK

Demolishing
Z 01 Demolishing reinforced cement concrete in suspended floors up to Cube 14275.00
4" thick , removing reinforcement and clearing debris.

Z 02 Demolishing cement concrete and clearing debris in floors from Cube 6590.00
4" to 6" thick floors.

Z 03 Demolishing reinforced cement, concrete in lintol of 9" x 6" L.ft. 34.00


removing reinforcement and clearing debris.

Z 04 Demolishing reinforced cement, concrete in lintol of 4 1/2"x 6" L.ft. 28.00


removing reinforcement and clearing debris.

Z 05 Demolishing brick piers, stacking brick and clearing debris away. Cube 930.00

Z 06 Demolishing 9" thick brick walls stacking brick and clearing Cube 1130.00
debris away.

Z 07 Demolishing 4 1/2" thick brick walls stacking brick and clearing Sqr. 425.00
debris away.

Z 08 Demolishing 3" thick brick paved floors and clearing debris away. Sqr. 550.00

Z 09
Demolishing drains and clearing debris away. L.ft. 19.00
Z 10 Demolishing rubble masonry built in cement and sand, stacking Cube 1510.00
rubble and clearing debris away.

Z 11
Demolishing floor tiles and clearing debris away. Sqr. 1280.00
Z 12
Demolishing wall tiles and clearing debris away. Sqr. 1035.00
Z 13
Chipping cement rendering and clearing debris away. Sqr. 820.00
Z 14
Chipping cement plastering and clearing debris away. Sqr. 565.00
Z 15
Chipping lime plastering and clearing debris away. Sqr. 280.00
Z 16
Chipping cement plaster in soffits and clearing debris away. Sqr. 850.00

Roof work
Z 17 Removing and stacking calicut tile or half round tile from roof in Sqr. 366.00
single storied building.

Z 18 Removing and stacking calicut tile or half round tile from roof in Sqr. 565.00
two storied building.

Z 19 Removing and stacking calicut tile or half round tile from roof in Sqr. 750.00
three storied building.

Z 20 Removing and stacking corrugated asbestos sheet from roof in Sqr. 280.00
single storied building.

Engineering organization, W.P. Page 78 BSR 2010


ITEM DESCRIPTION UNIT RATE

Z 21 Removing and stacking corrugated asbestos sheet from roof in Sqr. 375.00
two storied building.

Z 22 Removing and stacking corrugated asbestos sheet from roof in Sqr. 470.00
three storied building.

Z 23 Removing roof tiles/asbestos sheets and timber frame work, Sqr. 755.00
stacking serviceable materials and clearing debris away in single
storied building.

Z 24 Removing roof tiles/asbestos sheets and timber frame work, Sqr. 945.00
stacking serviceable materials and clearing debris away in two
storied building.

Z 25 Removing roof tiles/asbestos sheets and timber frame work, Sqr. 1130.00
stacking serviceable materials and clearing debris away in three
storied building.

Z 26
Removing and stacking calicut ridge tile. L.ft 23.00
Z 27
Removing and stacking asbestos ridging. L.ft 20.00
Z 28 Removing and stacking valance/Barge board materials and L.ft 7.00
clearing debris away in single storied building.

Z 29 Removing and stacking valance/Barge board materials and L.ft 10.00


clearing debris away in two storied building.

Z 30 Removing and stacking eaves gutter from roof of single storied L.ft 10.00
buildings.

Z 31 Removing and stacking eaves gutter from roof of two storied L.ft 15.00
building.

Z 32 Removing and stacking down pipes from roof of single storied L.ft 9.00
building.

Z 33 Removing and stacking down pipe from roof of two storied L.ft 12.00
building.

Z 34
Removing and stacking G.I. Valley gutter and flashing. L.ft 20.00
Z 35 Re-laying available calicut tiles on the roof in single storied Sqr. 375.00
building.
Z 36 Re-laying available calicut tiles on the roof in two storied Sqr. 470.00
building.
Z 37 Re-laying available calicut tiles on the roof in three storied Sqr. 565.00
building.
Z 38 Re-laying available asbestos sheets on the roof in single storied Sqr. 605.00
building.
Z 39 Re-laying available asbestos sheets on the roof in two storied Sqr. 755.00
building.
Z 40 Re-laying available asbestos sheets on the roof in three storied Sqr. 905.00
building.

Engineering organization, W.P. Page 79 BSR 2010


ITEM DESCRIPTION UNIT RATE

Z 41
Fixing available Reepers with wire nails. L.ft 5.00
Z 42 Fixing sorted out & cut to required size available timber to roof C.ft 520.00
or other carpentry work.

Z 43 Fixing available corrugated asbestos sheet with hooks , nuts and Sqr. 1215.00
bolts to roofing.

Z 44 Supply and fixing hooks, nuts & bolts for existing asbestos roof. No 26.00

Z 45 Ridge tile bedded in lime cement motor 1:1:4 and coloured to L.ft 73.00
match tiles.( Ridge tile available at site )

Z 46 Fixing of available barge/Valance boards & fascia including L.ft 18.00


cutting and minor repairs.

Z 47 Refixing existing G.I. Valley gutter and flashing including making L.ft 58.00
good.

Z 48 Fixing of existing gutter and down pipe with making goods and L.ft 30.00
including brackets.

Ceiling work
Z 49 Removing asbestos ceiling including timber frame work, stacking Sqr. 870.00
serviceable materials and clearing debris away in single storied
building.

Z 50 Removing asbestos ceiling including timber frame work, stacking Sqr. 1245.00
serviceable materials and clearing debris away in two storied
building.

Z 51 Removing ceiling timber frame work,(with out asbestos sheet) Sqr. 205.00
stacking serviceable materiel and clearing debris away in single
storied buildings.

Z 52 Removing ceiling timber frame work,(with out asbestos sheet) Sqr. 300.00
stacking serviceable materiel and clearing debris away in two
storied buildings.

Z 53 Removing existing ceiling sheet stacking materials at the site and Sqr. 490.00
clearing debris away.

Z 54 Renewing in small quantities of 6" x 5/8" - 3/4" lunumidella L.ft 55.00


ceiling including scaffolding up to 30'-0" hight.

Z 55 Fixing available lunumidella ceiling planks with new wire nails. Sqr. 1720.00
Z 56 Supplying and fixing 1 1/2" x 1/2" thick Beading , Halmilla or L.ft. 30.00
equivalant, planning & chamfering complete with brass screws.

Doors & Windows


Z 57 Removing and stacking door sash only up to 40 S.ft from existing No. 100.00
walls.

Engineering organization, W.P. Page 80 BSR 2010


ITEM DESCRIPTION UNIT RATE

Z 58 Removing and stacking door sash only over 40 S.ft from existing No. 150.00
walls.

Z 59 Removing and stacking door or window frame size up to 40 S.ft No. 730.00
from existing walls.

Z 60 Removing and stacking door or window frame size over 40 S.ft No. 1100.00
from existing walls.

Z 61 Removing and stacking window sash only up to 40 S.ft from No. 100.00
existing walls.

Z 62 Removing and stacking window sash only over 40 S.ft from No. 150.00
existing walls.

Z 63 Removing and stacking trellis work Sq.ft. 10.00


Z 64 Removing and stacking glass panes in doors, windows and Sq.ft. 31.00
fanlights.

Z 65 Renewing in short lengths with approved timber in existing door L.ft. 380.00
or window frames .

Z 66 Door or window frame altering existing rebate fillet using No. 1720.00
approved quality timber with screws and fixing available sashes.

Sq.ft.
Z 67 Fixing available door or window frame. 25.00
Sq.ft.
Z 68 Fixing available door or window sash. 18.00
Z 69 Removing damage sashes of door or window and preparing & re- Per sash 210.00
fixing.
Z 70 Supply and fixing Trellis work 1/2" x 1/2" laths with 2" apart Sq.ft. 250.00
diagonally, horizontally or vertically on existing timber framing.

Z 71 Supply and fixing 3mm thick glass panes for the existing door / Sq.ft. 190.00
window or fanlight sashes with approved timber beading.

Sanitary
Z 72 Removing wash basin , sink or urinals including all fittings and No. 245.00
making walls good.

Z 73 Removing squatting pan & standing types water closet with No. 1000.00
plugging sewer connection and reparing the wall & floor.

Z 74 Disconnecting flushing cistern and removing with plugging water No. 850.00
connection and making good of all damaged walls, floors & etc.

Z 75 Removing 1/2" to 1 1/2" dia. bib tap or stop cock. No. 34.00

Z 76 Fixing available ball valve. No. 100.00


Z 77 Fixing lavatory type basin to existing brackets. ( Tap , waste pipe No. 830.00
and basin are available)

Engineering organization, W.P. Page 81 BSR 2010


ITEM DESCRIPTION UNIT RATE

Z 78 Fixing of wash basin, leveling and connecting to existing water No. 1080.00
connections and making good (Basin, bracket and fittings are
available)

Z 79 Repairing bib taps and stop cocks by fixing leather washers. No. 105.00
Z 80 Removing & repairing pillar tap and re-fixing to the wash basin No. 170.00
carefully without any damaged.

Painting

Z 81 Removing painting from walls and clearing debris away. Sqr. 375.00
Z 82 Removing enamel paint from door or window frame and clearing Sqr. 750.00
debris away.

Z 83 Removing paint from painted glass panes with caustic soda Sq.ft. 26.00
solution or other paint remover.

Z 84 Removing water proof treatment or hot bitumen from floors or Sqr 1465.00
flat roof and clearing debris away.

Z 85 Painting ceiling beading with two coats of enamal paint. L.ft 12.00

Electrical

Supply & replacing one gang one way switch without wiring
Z 86 No. 100.00
including removing old one.

Supply & replacing two gang one way switch without wiring
Z 87 No. 175.00
including removing old one.

Supply & replacing three gang one way switch without wiring
Z 88 No. 250.00
including removing old one.

Supply & replacing four gang one way switch without wiring
Z 89 No. 330.00
including removing old one.

Supply & replacing five gang one way switch without wiring
Z 90 No. 410.00
including removing old one.

Supply & replacing 5 Amp. Switch socket outlet without wiring


Z 91 No. 160.00
including removing old one.

Supply & replacing 15 Amp. Switch socket outlet without wiring


Z 92 No. 435.00
including removing old one.

Supply & replacing 13 Amp. Switch socket outlet without wiring


Z 93 No. 300.00
including removing old one.

Other

Z 94 Supplying and placing 4" dia.PVC (Type 250) wheep holes. L.ft 130.00

Z 95 Removing existing mortice lock repairing and re-fixing. No 330.00

Z 96 Removing and stacking aluminium frame partition. Sq.ft. 8.00

Engineering organization, W.P. Page 82 BSR 2010


ITEM DESCRIPTION UNIT RATE

Transporting
Z 97 Transporting debris cleared away from site by tractor (approx.. Per Load 2200.00
10 Miles away).

Z 98 Transporting debris cleared away from site by 3.5 Cubes capacity Per Load 4500.00
heavy vehicle. Rate to inclusive of loading with JCB machine
(approx.. 20 Miles away).

AA - MISCELLANEOUS

The following AA 01 & AA 02 items are exclusively for


estimating purposes for which a standard work norm is not
immediately available and at the same time it is impossible to
arrive at a realistic break-up of labour component involved at
the time of preparation of the estimate. The rate is not to be
used for engaging labourers on routine work and the mere
appearance of this rate on BSR is not a sanction to pay the
daily labourers at this rate. Skilness of the Craftman to be
verified by a trade test certificate at the time of engagement.

AA 01 Engaging special skilled labour services in the trades of fitter, Per 8 Hour 885.00
electrician, welder, mason, carpenter, bar bender, painter on 8 day Per
hour day basis. Person

AA 02 Engaging labour services in un-skilled category of any type of Per 8 Hour 732.00
manual work on a 8 hour day basis. day Per
Person

Per 8 Hour
AA 03 Pumping water using 2" dia. water pump. 2440.00
Day

P.V.C. Coated Chain Link Fence


AA 04 Supplying & fixing PVC coated G.I. chain link fence (2" x 2") of Sq.ft. 84.00
gauge 10 height of 8'-0" for GI pipe fixed with available 20mm x
6mm flat iron ( GI pipe & flat iron measured separately) complete
with tension J bolts and tension cords.

AA 05 Supplying & fixing PVC coated G.I. chain link fence (2" x 2") of Sq.ft. 77.00
gauge 10 height of 10'-0" for GI pipe fixed with available 20mm
x 6mm flat iron ( GI pipe & flat iron measured separately)
complete with tension J bolts and tension cords.

AA 06 Supplying and fixing 2" dia.x 3.6mm thick Medium quality GI L.ft. 615.00
pipe 8'-0" clear height with excavation 1'-0"x 1'-0"x 3'-0" cement
concrete base 1:2 1/2:5 (1") with 1/2" dia. MS rods welded to
bottom of G.I. Pipe and drilling 7 Nos. holes to fixed the chain
link (chain link measured separately) and fiberglass coping on
top. Rate to include for application of one coat of anticorrosive
paint and two coats of enamel paint.

Engineering organization, W.P. Page 83 BSR 2010


ITEM DESCRIPTION UNIT RATE

AA 07 Supplying and fixing 2" dia.x 3.6mm thick Medium quality GI L.ft. 575.00
pipe 10'-0" clear height with excavation 1'-0"x 1'-0"x 3'-0"
cement concrete base 1:2 1/2:5 (1") with 1/2" dia. MS rods
welded to bottom of G.I. Pipe and drilling 7 Nos. holes to fixed
the chain link (chain link measured separately) and fiberglass
coping on top. Rate to include for application of one coat of
anticorrosive paint and two coats of enamel paint.

AA 08 Supplying and fixing 3" dia.x 4mm thick Medium quality GI pipe L.ft. 870.00
8'-0" clear height with excavation 1'-0"x 1'-0"x 3'-0" cement
concrete base 1:2 1/2:5 (1") with 1/2" dia. MS rods welded to
bottom of G.I. Pipe and drilling 7 Nos. holes to fixed the chain
link (chain link measured separately) and fiberglass coping on
top. Rate to include for application of one coat of anticorrosive
paint and two coats of enamel paint.

AA 09 Supplying and fixing 3" dia.x 4mm thick Medium quality GI pipe L.ft. 830.00
10'-0" clear height with excavation 1'-0"x 1'-0"x 3'-0" cement
concrete base 1:2 1/2:5 (1") with 1/2" dia. MS rods welded to
bottom of G.I. Pipe and drilling 7 Nos. holes to fixed the chain
link (chain link measured separately) and fiberglass coping on
top. Rate to include for application of one coat of anticorrosive
paint and two coats of enamel paint.

AA 10 Supplying and fixing 20mm x 6mm flat iron to existing GI pipe L.ft. 110.00
(GI pipe measured separately) to fix the chain link, Rate inclusive
of drilling 09 Nos. holes of 6mm dia. Rate to include for
application of one coat of anticorrosive paint and two coats of
enamel paint.
AA 11 Supplying and fixing 1 1/4"x 1 1/4"x 6mm angle iron horizontal L.ft. 220.00
bracings welded to existing GI pipes. Rate to include for
application of one coat of anticorrosive paint and two coats of
enamel paint.

AA 12 Supplying and fixing 1" dia. x 3.2mm thick GI pipe horizontal L.ft. 235.00
bracings welded to existing GI pipes. Rate to include for
application of one coat of anticorrosive paint and two coats of
enamel paint.

Barbed Wire Fence


AA 13 Supplying & fixing 14 gauge galvanized barbed wire 4 points, 3" L.ft. 10.00
apart on pre-cast concrete posts with hook bolts including
straining. ( Concrete Posts paid seperately)

AA 14 Supplying & fixing pre-cast concrete Intermediate Posts of size No. 990.00
(5" x 5") - (3" x 3") & 5'-9" high for 7 strands including
necessary excavation and concreting at the placing.
AA 15 Supplying & fixing pre-cast concrete End Posts of size (5" x 5") No. 1555.00
& 6'-3" high for 7 strands including necessary excavation and
concreting at the placing.

Engineering organization, W.P. Page 84 BSR 2010


ITEM DESCRIPTION UNIT RATE

AA 16 Supplying & fixing pre-cast concrete Struts of size (5" x 4") - (3" No. 1075.00
x 3") & 6'-5" high for 7 strands including necessary excavation
and concreting at the placing.
AA 17 Supplying & fixing pre-cast concrete Intermediate Posts of size No. 1055.00
(5" x 5") - (3" x 3") & 6'-9" high for 8 strands including
necessary excavation and concreting at the placing.
AA 18 Supplying & fixing pre-cast concrete End Posts of size (5" x 5") No. 1950.00
& 7'-3" high for 8 strands including necessary excavation and
concreting at the placing.
AA 19 Supplying & fixing pre-cast concrete Struts of size (5" x 4") - (3" No. 1130.00
x 3") & 7'-5" high for 8 strands including necessary excavation
and concreting at the placing.
AA 20 Supplying & fixing pre-cast concrete Intermediate Posts of size No. 1280.00
(5" x 5") - (3" x 3") & 7'-9" high for 9 strands including
necessary excavation and concreting at the placing.
AA 21 Supplying & fixing pre-cast concrete End Posts of size (5" x 5") No. 2230.00
& 8'-3" high for 9 strands including necessary excavation and
concreting at the placing.
AA 22 Supplying & fixing pre-cast concrete Struts of size (5" x 4") - (3" No. 1275.00
x 3") & 8'-5" high for 9 strands including necessary excavation
and concreting at the placing.
AA 23 Supplying & fixing pre-cast concrete Intermediate Posts of size No. 1585.00
(5" x 5") - (3" x 3") & 7'-7" + 1'-6" high for 12 strands including
necessary excavation and concreting at the placing.
AA 24 Supplying & fixing pre-cast concrete End Posts of size (5" x 5") No. 2795.00
& 8'-1" + 1'-6" high for 12 strands including necessary
excavation and concreting at the placing.
AA 25 Supplying & fixing pre-cast concrete Struts of size (5" x 4") - (3" No. 2335.00
x 3") & 8'-1" + 1'-6" high for 12 strands including necessary
excavation and concreting at the placing.

AB - LANDSCAPINGS

Turfing
AB 01 Supply , laying & turfing Buffalo grass after the levelling ground Sq.ft. 40.00
with necessary soil filling and laying refuse of coir layer and
watering. Also fertilizing with using waer and maintain the turfing
area for a 1 year period.
AB 02 Supply , laying ,turfing & planting Blue grass after the levelling Sq.ft. 130.00
ground with necessary soil filling and laying refuse of coir layer
and watering. Also fertilizing with using waer and maintain the
turfing area for a 1 year period.

ROOT BOLL PLANTS


AB 03 Supply & Planting maximum 5'-0" girth and 10'-0" - 12'-0" high No. 5400.00
Atteria Plant with the fertilizing , watering & plant should be
maintain for a 1 year period.

Engineering organization, W.P. Page 85 BSR 2010


ITEM DESCRIPTION UNIT RATE

AB 04 Supply & Planting maximum 5'-0" girth and 10'-0" - 12'-0" high No. 5400.00
Ehala with the fertilizing , watering & plant should be maintain
for a 1 year period.
AB 05 Supply & Planting maximum 5'-0" girth and 10'-0" - 12'-0" high No. 5400.00
Araliya Plant with the fertilizing , watering & plant should be
maintain for a 1 year period.
AB 06 Supply & Planting maximum 5'-0" girth and 10'-0" - 12'-0" high No. 5400.00
Kiripalu Plant with the fertilizing , watering & plant should be
maintain for a 1 year period.
AB 07 Supply & Planting maximum 5'-0" girth and 7'-0" - 8'-0" high No. 6500.00
Foxtail Palm with the fertilizing , watering & plant should be
maintain for a 1 year period.
AB 08 Supply & Planting maximum 5'-0" girth and 8'-0" - 10'-0" high No. 3250.00
Kentiya Palm with the fertilizing , watering & plant should be
maintain for a 1 year period.
AB 09 Supply & Planting maximum 5'-0" girth and 6'-0" - 8'-0" high No. 4300.00
Red Palm with the fertilizing , watering & plant should be
maintain for a 1 year period.
AB 10 Supply & Planting maximum 5'-0" girth and 6'-0" - 8'-0" high No. 6500.00
Queen Palm with the fertilizing , watering & plant should be
maintain for a 1 year period.

Paving Blocks
AB 11 Supply & paving 100mm thick Uni-Natura precast interlocking Sqr. 27330.00
paving blocks of 40 N/mm2 compressive strengh , manufactured
by "Sehda Lanka Ltd." or approved equivelant, on 2" thick
compacted quarry dust bed laid on top of a well compacted earth
sub base for the high volume traffic areas. ( Colour of block
should be approved by Architect. )

AB 12 Supply & paving 100mm thick Uni-Flora precast interlocking Sqr. 30275.00
paving blocks of 40 N/mm2 compressive strengh , manufactured
by "Sehda Lanka Ltd." or approved equivelant, on 2" thick
compacted quarry dust bed laid on top of a well compacted earth
sub base for the high volume traffic areas. ( Colour of block
should be approved by Architect. )

AB 13 Supply & paving 80mm thick Uni-Natura precast interlocking Sqr. 24250.00
2
paving blocks of 15 N/mm compressive strengh , manufactured
by "Sehda Lanka Ltd." or approved equivelant, on 2" thick
compacted quarry dust bed laid on top of a well compacted earth
sub base for the Low volume traffic areas or Pedestrian areas. (
Colour of block should be approved by Architect. )

Engineering organization, W.P. Page 86 BSR 2010


ITEM DESCRIPTION UNIT RATE

AB 14 Supply & paving 80mm thick Uni-Flora precast interlocking Sqr. 27070.00
paving blocks of 15 N/mm2 compressive strengh , manufactured
by "Sehda Lanka Ltd." or approved equivelant, on 2" thick
compacted quarry dust bed laid on top of a well compacted earth
sub base for the Low volume traffic areas or Pedestrian areas. (
Colour of block should be approved by Architect. )

AB 15 Supply & paving 60mm thick Uni-Natura precast interlocking Sqr. 22715.00
paving blocks of 15 N/mm2 compressive strengh , manufactured
by "Sehda Lanka Ltd." or approved equivelant, on 2" thick
compacted quarry dust bed laid on top of a well compacted earth
sub base for the Low volume traffic areas or Pedestrian areas. (
Colour of block should be approved by Architect. )

AB 16 Supply & paving 60mm thick Uni-Flora precast interlocking Sqr. 25280.00
paving blocks of 15 N/mm2 compressive strengh , manufactured
by "Sehda Lanka Ltd." or approved equivelant, on 2" thick
compacted quarry dust bed laid on top of a well compacted earth
sub base for the Low volume traffic areas or Pedestrian areas. (
Colour of block should be approved by Architect. )

AB 17 Supply & paving Dutch-Natura precast interlocking paving Sqr. 25150.00


blocks of 15 N/mm2 compressive strengh , manufactured by
"Sehda Lanka Ltd." or approved equivelant, on 2" thick
compacted quarry dust bed laid on top of a well compacted earth
sub base for the Low volume traffic areas or Pedestrian areas. (
Colour of block should be approved by Architect. )
AB 18 Supply & paving Dutch-Floara precast interlocking paving Sqr. 28350.00
blocks of 15 N/mm2 compressive strengh , manufactured by
"Sehda Lanka Ltd." or approved equivelant, on 2" thick
compacted quarry dust bed laid on top of a well compacted earth
sub base for the Low volume traffic areas or Pedestrian areas. (
Colour of block should be approved by Architect. )

AB 19 Supply & paving Camino-Natura precast interlocking paving Sqr. 23740.00


blocks of 15 N/mm2 compressive strengh , manufactured by
"Sehda Lanka Ltd." or approved equivelant, on 2" thick
compacted quarry dust bed laid on top of a well compacted earth
sub base for the Low volume traffic areas or Pedestrian areas. (
Colour of block should be approved by Architect. )

AB 20 Supply & paving Camino-Floara precast interlocking paving Sqr. 26300.00


blocks of 15 N/mm2 compressive strengh , manufactured by
"Sehda Lanka Ltd." or approved equivelant, on 2" thick
compacted quarry dust bed laid on top of a well compacted earth
sub base for the Low volume traffic areas or Pedestrian areas. (
Colour of block should be approved by Architect. )

Engineering organization, W.P. Page 87 BSR 2010


ITEM DESCRIPTION UNIT RATE

AB 21 Supply & paving Wintage-Natura precast interlocking paving Sqr. 22200.00


blocks of 15 N/mm2 compressive strengh , manufactured by
"Sehda Lanka Ltd." or approved equivelant, on 2" thick
compacted quarry dust bed laid on top of a well compacted earth
sub base for the Low volume traffic areas or Pedestrian areas. (
Colour of block should be approved by Architect. )

AB 22 Supply & paving Wintage-Floara precast interlocking paving Sqr. 24125.00


blocks of 15 N/mm2 compressive strengh , manufactured by
"Sehda Lanka Ltd." or approved equivelant, on 2" thick
compacted quarry dust bed laid on top of a well compacted earth
sub base for the Low volume traffic areas or Pedestrian areas. (
Colour of block should be approved by Architect. )

AB 23 Supply & paving Dobler-Natura precast interlocking paving Sqr. 22200.00


2
blocks of 15 N/mm compressive strengh , manufactured by
"Sehda Lanka Ltd." or approved equivelant, on 2" thick
compacted quarry dust bed laid on top of a well compacted earth
sub base for the Low volume traffic areas or Pedestrian areas. (
Colour of block should be approved by Architect. )
AB 24 Supply & paving Dobler-Floara precast interlocking paving Sqr. 24510.00
blocks of 15 N/mm2 compressive strengh , manufactured by
"Sehda Lanka Ltd." or approved equivelant, on 2" thick
compacted quarry dust bed laid on top of a well compacted earth
sub base for the Low volume traffic areas or Pedestrian areas. (
Colour of block should be approved by Architect. )

AB 25 Supply & paving Pietra-Natura precast interlocking paving Sqr. 26300.00


blocks of 15 N/mm2 compressive strengh , manufactured by
"Sehda Lanka Ltd." or approved equivelant, on 2" thick
compacted quarry dust bed laid on top of a well compacted earth
sub base for the Low volume traffic areas or Pedestrian areas. (
Colour of block should be approved by Architect. )

AB 26 Supply & paving Pietra-Floara precast interlocking paving Sqr. 29250.00


2
blocks of 15 N/mm compressive strengh , manufactured by
"Sehda Lanka Ltd." or approved equivelant, on 2" thick
compacted quarry dust bed laid on top of a well compacted earth
sub base for the Low volume traffic areas or Pedestrian areas. (
Colour of block should be approved by Architect. )

CONCRETE CURB
AB 27 Supply & paving pre cast concrete Curb ( Small ) of size L.ft. 350.00
540mm x 175mm manufactured by "Sehda Lanka Ltd." or
approved equivelant, with 1:3 cement mortar on top of a well
compacted earth sub base.
AB 28 Supply & paving pre cast concrete Curb ( Half ) of size 450mm L.ft. 530.00
x 255mm manufactured by "Sehda Lanka Ltd." or approved
equivelant, with 1:3 cement mortar on top of a well compacted
earth sub base.

Engineering organization, W.P. Page 88 BSR 2010


ITEM DESCRIPTION UNIT RATE

AB 29 Supply & paving pre cast concrete Curb ( Full ) of size 915mm L.ft. 525.00
x 255mm manufactured by "Sehda Lanka Ltd." or approved
equivelant, with 1:3 cement mortar on top of a well compacted
earth sub base.

CEMENT POTS
AB 30 Supply & placing of 12" dia. Cement pots 4'-0" high ( size No. 1400.00
approximate )
AB 31 Supply & placing of 18" dia. Cement pots 4'-0" high ( size No. 2600.00
approximate )
AB 32 Supply & placing of 24" dia. Cement pots 4'-0" high ( size No. 3400.00
approximate )
AB 33 Supply & placing of 28" dia. Cement pots 4'-0" high ( size No. 6800.00
approximate )
AB 34 Supply & placing of 48" dia. Cement pots 4'-0" high ( size No. 9100.00
approximate )

Engineering organization, W.P. Page 89 BSR 2010

You might also like