You are on page 1of 16

page 1

Russell Gries's prospective on the activation


sequence of the ABHA torus using electricity. V.1

This document was created by Russell Gries to help us


understand the missing link between the vortex based
mathematics’s toroid skin and the proper way to
energize the Rodin/ABHA coil with electricity. I have
spent many hours working on this document and would
appreciate any feedback on this document to improve/fix
any problems or missing information. This energizing is
just the surface topology, not true 3D as we are only
working with the surface of the toroid. Also if you build
and test the Rodin/ABHA coil please let me know as I
would like to work with you as well as document all
findings in one document for all to see.
This document is free to all and must not be sold in
anyway. Thank you. ~Russ

Email: rwg42985@aol.com

There is a three part searies videos that go along with this document. They can be found here:
Part 1: http://www.youtube.com/watch?v=4lQhuXzIJgQ
Part 2: http://www.youtube.com/watch?v=ACxx-7L1RaE
Part 3: http://www.youtube.com/watch?v=Ko3frb8G14w
Page 2
The symbol to the left is the symbol of enlightenment, courtesy of Adam from
vortexmath.com along with other photos in this document. This symbol is where all
the vortex math comes from, Marko Rodin is the discoverer of this. The reason I
choose this version of the symbol is that it matches the color's I will be using for
this document. You can see that there are two triangles and a point of a triangle I have taken a big
Thus there are three colors and each color is a family number group. These family leap into the
math, so the
number groups are energized in a sequence of three. We will call them stage A,
basics of the
stage B and stage C. One thing that you need to realize that there are both positive
math are not
and negative numbers. So for a positive 9 there is also a negative 9 behind it and so described in this
on for all the numbers. So there are three parts and each part has a positive and document. Please
negative this is referred to as a binary triplet. It's a flip/flop or on/off but it works in see Marko Rodin
threes. Now what I have discovered in my research is that when things are not or Randy
positive or negative they are neutral or “floating”. So we have stage A which is the Powell's Videos
blue or 2,5,8. Then stage B is the red or 3,6,9 and stage C is green or 1,4,7. There is for more detailed
never two stages on at the same time in one nested vorticity circuit. It's either A, B information. The
or C. That means they are 120 degrees out of phase with each other. The rest of the videos can be
document will explain. found on
YouTube by
Below you can see a 2D view of the skin of a 9x9 torus. With the symbol of enlightenment we can make a 2D map like this. On searching there
this map below there are three nested vortice circuits. According to Randy Powell the smallest map you can make is a 9x9. You names.
can see the numbers in a solid highlight box are connecting the nested vortice circuits together in a continues loop. There are
three nested vortice circuits on a 9x9 map. The color numbers are positive. The black numbers are negative counter draft space
or “gravity”. With this 2D map you can create a 3D torus so the 2D map wraps around the torus. Keep in mind that the three
nested vortice circuits never connect to each other. They are all isolated.
1 2 1 2
2 1 5 7 2 1 5 7
3 9 6 6 9 3 1 > > > > > > > > > > 3 9 6 6 9 3 > > > > > > > > > > > 2
4 8 7 5 1 2 4 8 4 8 7 5 1 2 4 8
5 7 8 4 2 1 5 7 8 4 9x9 torus skin 5 7 8 4 2 1 5 7 8 4
9x9 torus skin 6 6 9 3 3 9 6 6 9 3 3 9 labeled with 4 > > > > > > 6 6 9 3 3 9 6 6 9 3 3 9 > > > > > > > > 5
with no outlines 7 5 1 2 4 8 7 5 1 2 4 8 7 5 nested vortices 7 5 1 2 4 8 7 5 1 2 4 8 7 5
8 4 2 1 5 7 8 4 2 1 5 7 8 4 2 1 outlined 8 4 2 1 5 7 8 4 2 1 5 7 8 4 2 1
9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 3> > > > 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 > > > > > 3
4 8 7 5 1 2 4 8 7 5 1 2 4 8 7 5 4 8 7 5 1 2 4 8 7 5 1 2 4 8 7 5
8 4 2 1 5 7 8 4 2 1 5 7 8 4 8 4 2 1 5 7 8 4 2 1 5 7 8 4
3 9 6 6 9 3 3 9 6 6 9 3 2 > > > > > > > 3 9 6 6 9 3 3 9 6 6 9 3 > > > > > > > > 1
7 5 1 2 4 8 7 5 1 2 7 5 1 2 4 8 7 5 1 2
2 1 5 7 8 4 2 1 2 1 5 7 8 4 2 1
6 6 9 3 3 9 5 > > > > > > > > > > 6 6 9 3 3 9 > > > > > > > > > > > 4
1 2 4 8 1 2 4 8
5 7 5 7
Here you can see the 2D torus map and the emanations moving in straight lines that are energizing Page 3
the torus skin in stages of the three family number groups. Blue, Red and Green.
Black arrows are negative counter draft space or “gravity”.
Orange arrows are emanating from the center of the toroid.

Activation
Activation Activation sequence,
sequence, sequence, stage C, 1,4,7
stage A, 2,5,8 1 2 stage B, 3,6,9 1 2 dubbing 1 2
halving circuit 2 1 5 7 “god space” 2 1 5 7 circuit. 2 1 5 7
3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3
4 8 7 5 1 2 4 8 4 8 7 5 1 2 4 8 4 8 7 5 1 2 4 8
5 7 8 4 2 1 5 7 8 4 5 7 8 4 2 1 5 7 8 4 5 7 8 4 2 1 5 7 8 4
6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9
7 5 1 2 4 8 7 5 1 2 4 8 7 5 7 5 1 2 4 8 7 5 1 2 4 8 7 5 7 5 1 2 4 8 7 5 1 2 4 8 7 5
8 4 2 1 5 7 8 4 2 1 5 7 8 4 2 1 8 4 2 1 5 7 8 4 2 1 5 7 8 4 2 1 8 4 2 1 5 7 8 4 2 1 5 7 8 4 2 1
9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6
4 8 7 5 1 2 4 8 7 5 1 2 4 8 7 5 4 8 7 5 1 2 4 8 7 5 1 2 4 8 7 5 4 8 7 5 1 2 4 8 7 5 1 2 4 8 7 5
8 4 2 1 5 7 8 4 2 1 5 7 8 4 8 4 2 1 5 7 8 4 2 1 5 7 8 4 8 4 2 1 5 7 8 4 2 1 5 7 8 4
3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3
7 5 1 2 4 8 7 5 1 2 7 5 1 2 4 8 7 5 1 2 7 5 1 2 4 8 7 5 1 2
2 1 5 7 8 4 2 1 2 1 5 7 8 4 2 1 2 1 5 7 8 4 2 1
6 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9
1 2 4 8 1 2 4 8 1 2 4 8
5 7 5 7 5 7

Below is the top view of the 3D torus skin. This is the 9x9, they are highlighted for each stage same as above.

Stage A Stage B Stage C


The pattern is repeating so we only Page 4
This in one nested vortice circuit on the 9x9 torus need this one section of it.
5 7 8 4 2 1 5 7 8 4 2 1 5 7 8 4 2 1 I will be referencing just one 5 7 8 4 2 1
6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 > > > > > section of the nested vortice > > > > > 6 9 3 3 9 6
1 2 4 8 7 5 1 2 4 8 7 5 1 2 4 8 7 5 circuit Shown on the left. 1 2 4 8 7 5

Everything on this page happens in three stages A, B and C.


Everything that is highlighted is positive or negative. All family
number groups have both positive and negative numbers that are
on at the same time. All The A's in these diagrams are on at the
same time, all B are on at the same time and C are on at the same
time.

Truth table for Positive Negative


energizing one Positive
nested vorticity Positive stage 5 7 8 4 2 1 5 7 8 4 2 1 C 5 7 8 4 2 1
circuit FNG's A B C > > > > A 6 9 3 3 9 6 A 6 9 3 3 9 6 > > > > B 6 9 3 3 9 6
1 4 7 x 1 2 4 8 7 5 1 2 4 8 7 5 A 1 2 4 8 7 5
Dubbing 3 6 9 x
2 5 8 5 7 8 4 2 1 5 7 8 4 2 1
1 4 7 > > > > B 6 9 3 3 9 6 B 6 9 3 3 9 6
Halving 3 6 9 1 2 4 8 7 5 1 2 4 8 7 5
2 5 8 x Negative
5 7 8 4 2 1 5 7 8 4 2 1 A 5 7 8 4 2 1
> > > > >
> > > > >
> > > > >

> > > > C 6 9 3 3 9 6 C 6 9 3 3 9 6 > > > > B 6 9 3 3 9 6


1 2 4 8 7 5 1 2 4 8 7 5 C 1 2 4 8 7 5
Truth table for
energizing one
nested vorticity Negative stage
circuit FNG's A B C A B C
1 4 7
Dubbing 3 6 9 9 9 9
2 5 8 x 8 1 8 1 8 1
1 4 7
Halving 3 6 9 x 7 2 7 2 7 2
2 5 8 x Positive >

6 3 6 3 6 3
5 4 5 4 5 4

A B C

9 9 9
8 1 8 1 8 1

7 2 7 2 7 2
Negative >

6 3 6 3 6 3
5 4 5 4 5 4
In theory if you were to take the positive numbers and make them a positive Page 5
voltage, and the negative numbers and make them a negative voltage, then
everything that is off is a zero voltage or floating. Below is what it would look
like as an electrical signal. Below I will be using a sine wave. All the voltages
and wave forms need to be explored.
This document is just
to show the theory of design.

Below is one nested vortice circuit showed using a sign wave to show the positive and negative voltage penitential.

When a number/voltage is off it is neutral, you can see in the diagrams that each number pattern is 180 degrees out of phase. Also keep in mind that in each stage
when the positive is on the negative is neutral. Also when the negative is on the positive is neutra.l So even tho the numbers are active at the same time, they never
are electrically on (high or low) at the same time since they are 180 degrees out of phase.

5 7 8 4 2 1 2 8 5 2 8 5 2 8 5
Positive > A 6 9 3 3 9 6 1 7 4 4 7 1 1 7 4 4 7 1 1 7 4 4 7 1
1 2 4 8 7 5 5 8 2 5 8 2 5 8 2

Positive >
5 7 8 4 2 1 Neutral
Negative > A 6 9 3 3 9 6 Negative >
1 2 4 8 7 5 Above is the half wave AC sign wave form (green) is
positive and (blue) is negative.

5 7 8 4 2 1 6 3 9 6 3 9 6 3 9 At this time all other numbers


Positive > B 6 9 3 3 9 6 all other numbers / circuits here < are neutral and are not
1 2 4 8 7 5 9 3 6 9 3 6 9 3 6 energized at all.
Positive
Neutral >
5 7 8 4 2 1 Negative
Negative > B 6 9 3 3 9 6 Above is the higher energy you cant see.
1 2 4 8 7 5 “The god thing”

5 7 8 4 2 1 7 4 1 7 4 1 7 4 1
Positive > C 6 9 3 3 9 6 5 2 8 8 2 5 5 2 8 8 2 5 5 2 8 8 2 5
1 2 4 8 7 5 1 4 7 1 4 7 1 4 7

Positive >
5 7 8 4 2 1 Neutral
Negative > C 6 9 3 3 9 6 Negative >
1 2 4 8 7 5 Above is the half wave AC sign wave (green) is positive
and (blue) is negative.
Page 6

Legend
Below is one nested vortice circuit and how it should be This in one nested vorticity circuit on the 9x9 torus
energized. one nested vortice circuit consists of 2 wires P = positive 5 7 8 4 2 1 5 7 8 4 2 1 5 7 8 4 2 1
and a gap space. The two wires will be energized in three N = negative 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6
stages. They will be just like above. one is the halving, one Z = zero 1 2 4 8 7 5 1 2 4 8 7 5 1 2 4 8 7 5
is the gap space and one is the doubling.

Here is the halving circuit. It will be one wire on your toroid. We will call it L2. > > 5 7 8 4 2 1 5 7 8 4 2 1 5 7 8 4 2 1
Here you have a blank on your toroid. This is the gap space (no wire). > > 6 9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6
Here is the doubling circuit. It will be one wire on your toroid. We will call it L1. > > 1 2 4 8 7 5 1 2 4 8 7 5 1 2 4 8 7 5

In the boxes below the voltage will be the same but the wave form is different.
Sign Everything in this box is happening in one cycle. We will call
Square Everything in this box is happening in one cycle. We will call
wave one cycle 360 degrees to make it easier. wave. one cycle 360 degrees to make it easier.
Stage A Stage A
L1 > P > L1 > P >
120 Degrees > > Z 120 Degrees > > Z
L2 > N > L2 > N >
Stage B Stage B
> >
120 Degrees > > > 120 Degrees > > >
> >
Stage C Stage C
L2 > P > L2 > P >
120 Degrees > > Z 120 Degrees > > Z
L1 > N > L1 > N >
Notice that L1 is 180 degrees out of phase between stages A and C Notice that L1 is 180 degrees out of phase between stages A and C
The wave form is a half wave sign wave. The signal is 50% duty cycle square wave.
Page 7

Thus far we have been talking about how to energize one nested vortice circuit.
From now on I will be calling a nested vortice circuit : (NVC). On a 9x9 torus
there are three NVC's. As before there are two wires and a gap for each NVC. If
we are energizing a 9x9 torus we will have 6 wires. We will call the wires L1, L2,
L3, L4, L5, L6. As before L1 and L2 is NVC one, L3, L4 is NVC two and L5, L6 is
NVC three. Each NVC contains a gap space. Each NVC is 120 degrees off from
the last NVC when energized. Spacing of the NVC are 120 degrees out of phase.
So to recap. While there are three stages going in one NVC the L's and gap
space are also cycling in threes. The NVC's are working in 120 degree phases
with each other. This is what creates the harmonics!

In this torus below the three arrows are different


lengths. Each arrow is pointing to a 6 in a different
In this 2d map below the three arrows are different NVC. This is the 120 deference between each NVC.
lengths. Each arrow is pointing to a 6 in a different This is why the NVC's are energized 120 degrees
NVC. This is better seen in the next diagram. This is out of phase.
the 120 deference between each NVC.
1 2 NVC 2

>
2 1 5 7
3 9 6 6 9 3
4 8 7 5 1 2 4 8
5 7 8 4 2 1 5 7 8 4
6 6 9 3 3 9 6 6 9 3 3 9
7 5 1 2 4 8 7 5 1 2 4 8 7 5 < NVC 1
8 4 2 1 5 7 8 4 2 1 5 7 8 4 2 1
9 3 3 9 6 6 9 3 3 9 6 6 9 3 3 9 6 6
4 8 7 5 1 2 4 8 7 5 1 2 4 8 7 5
8 4 2 1 5 7 8 4 2 1 5 7 8 4
3 9 6 6 9 3 3 9 6 6 9 3
7 5 1 2 4 8 7 5 1 2
2 1 5 7 8 4 2 1
NVC 1 6 6 9 3 3 9
1 2 4 8
NVC 2 5 7 NVC 3 >

NVC 3
Page 8

This is a the chart from earlier. This is one NVC and its three stages, I will be
using the A, B and C as the three stages in one NVC in the next diagram. This is the three stages in one NVC.

Stage A A B C
L1 > P >
A 120 Degrees > > Z
L2 > N > This is the three stages in one NVC cycling.
Stage B
> A B C A B C A B C A B C A B C A B C A B C
B 120 Degrees > > >
>
Stage C
L2 > P >
C 120 Degrees > > Z
L1 > N >

Start Cycle NVC three > >


Start Cycle NVC one > >
Start Cycle NVC two > >
In this diagram below each NVC is shifted 120
degrees off from the other NVC's. This is the
phasing which creates the harmonics. This is all
three NVC for the 9x9 torus.

This line will indicate NVC one and its three stages, A,B,C. > > A B C A B C A B C A B C A B C A B C A B C
This line will indicate NVC two and its three stages, A,B,C > > A B C A B C A B C A B C A B C A B C A B C
This line will indicate NVC three and its three stages, A,B,C. > > A B C A B C A B C A B C A B C A B C A B C
Page 9

This 9x9 torus is labeled with different colors. Each color is


representing a wire. The colors correspond like this:

Yellow is L1, Green is L2 and they are part of NVC one.

Blue is L3, Orange is L4 and they are apart of NVC two.

Brown is L5, Black is L6 and they are apart of NVC three.

There is a gap space in each NVC, it is located between each


wire in the NVC group, this is represented in the light gray
color.

The wires are hard to see on a 2D torus The wire goes


around the torus and back to the same point it started at.
This perspective view is easier to see how the wires wrap
around the torus.
Page 10
Now I'm going to discuss the 36x18 as it is the most common seen number
torus. I'm not going to go into the details on the torus, but I will show you
the sequence of activation. Here you can see the 3 stages in the NVC's. It is
just as before but with more tiles and more NVC's

Stage A Stage B Stage C


Page 11

The 36 x 18 is only slightly different than the 9x9; the main


deference is that instead of there being three NVC's, there
are 6 NVC's. In this diagram I have highlighted the NVC's,
Red, Green and Blue. There are two shades of each color;
these are different NVC's. Since there are double the NVC's,
then the amount of wires also double. As before, for each
NVC there are 2 wires and a gap space.

The wires still follow the highlighted colors,


but instead of the wire going around the torus
once before starting at the beginning, they go
around twice. Take the light red for instance. If
we start at the top and follow the red around
you can see it goes in the center of torus, 90
degrees from where it came out. (Top). Then
the wire comes out at the bottom of the torus,
which is 180 degrees from the start of the
wire. Then the wire goes back in the center 90
degrees from the bottom, so we are now 270
degrees from where we started. Then back
around and out the top to make our 360
degree's all the way around the torus to the
start of the wire. So you can see, instead of
In this 36x18 there are now 12 wires as making it one time around the torus, it goes
there are six NVC's. There are two wires two times around the torus.
and a gap space within each solid color.
The colors correspond like this:

Light Red NVC one , L1, L2


Light Green NVC two , L3, L4
Light Blue NVC three , L5, L6
Dark Red NVC four , L7, L8
Dark Green NVC five , L9,L10
Dark Blue NVC six , L11, L12
Page 12

In this diagram. You can see the white nested vortices are the same spacing from the
center. The arrows are the emanations activating the numbers. As you can see the light
blue and dark blue are activated at the same time. If you look at the math, the nested
vortices highlighted in white are activated at the same time. With this said you don’t
need to change anything on your activation circuit. You can just parallel the NVC one
and four wires L1 and L7. You also parallel NVC one and four wires L2 and L8. That
means the NVC that are 90 degrees apart are activated st the same time.
Page 13

1 Start Cycle NVC one & four > >


The wires and sequence will

3Start Cycle NVC three & six > >


2 Start Cycle NVC two& five > >
be like this:

Light Red NVC one and four , L1, L7 paralleled A


1 Gap Space
Dark Red NVC one and four , L2, L8 paralleled
B
C

Light Green NVC two and five , L3, L9 paralleled A


2 Gap Space
Dark Green NVC two and five , L4, L10 paralleled
B
C

Light Blue NVC three and six , L5, L11 paralleled A


3 Gap Space
Dark Blue NVC three and six , L6, L12 paralleled
B
C
A B C A B C A B C A B C A B C A B C A B C
A B C A B C A B C A B C A B C A B C A B C
A B C A B C A B C A B C A B C A B C A B C
Page 14

This is a schematic for the 9x9 ABHA torus. This is a


circuit I came up with using a 74LS175 IC for the 3 stages
A, B,C. The center tap transformer and diodes create the
positive half wave and the negative half wave, as well as the
180 degree phased shift. There are 4 Mosfets to control the
energizing sequence. The Mosfets are connected so they
are 120 degrees out of phase with the other coils. You can
also use a microprocessor to control the 3 stages. The
LED's are for visual use only.

Thanks to YouTube member


rave154 for all the testing
research discussion.
Page 15
This is the 36x18 schematic. It is the same schematic but
with the other coils that make up the 36x18. Here I have the
coils paralleled and I feel that this is the way to do it, but
you can also series the coils for more resistance and less
amperage.

Thanks to YouTube member


rave154 for all the testing
research discussion.
Page 16

With all of this said. I would like to let you know my thoughts on this document. When energizing the coil I think that
everything needs to be perfect to get good results. Make sure all wires are identical. I believe that if one wire Is longer
than the other it will have a great effect on the energizing time. I remember reading a Tesla patent that was talking about
the wire length playing a roll on the device working correct. It’s all about resonance. So if the connections and wires are
not all the same maybe down to the 1/16” of an inch might play a role to not working correctly. The phasing needs to be
timed with the wave cycle. So the coil is energizing when the start of the wave form is starting and when it ends then
switch the coil energized and so on.

Everything needs to be tried. This document was created to try to get as close to the math as possible.

Another thing we need to take in to consecration is that this document was talking about a one layer coil. I just
discovered for myself that there are 3 plains and each plain has a map. Greg Volk and Marko Rodin is working on this
now. That is what I will be working on next. This should be interesting.

Please feel free to contact me and let me now your thoughts and ideas. Also if you need help I will be glad to help if I
can.

Thanks! ~Russ 9-30-10

I will be creating a PDF document of any one that’s want to give my any schematics and program code that you have
developed. So anyone that wants to add to the file can just send me what they have tried how they energized the coil
and there results. Anything and everything can be added to the file. Just email me all data and I will add it then post an
updated file for download. Basically what I want to do is collect all data and store it in one place so anyone that would
like to see the tests that other people have tried can just check out the PDF. You will have your own section in the PDF
and I will just add anything you send me to your section. One thing I do ask is that you send any photos (coils and
circuits), all schematics, all data in detail and I will add the info. I will not change it in anyway. So be sure to make it with
good details. Anything and everything goes as long as it pertains to VBM. I hope to make it the most compiled data of
Rodin coils and tests/ideas for all to see in one PDF. Thank you! ~Russ

The testing data can be found here: http://www.ringsbyruss.com/testdata/Rodin_coil_testing_data_compiled.pdf

Contact me: rwg42985@aol.com

You might also like