Professional Documents
Culture Documents
6 CORPORATE PARKWAY
GOOSE CREEK , SC . 29445 STYLE NUMBER: LSP1826NR1,LSP1826BN1
www . quoizel . com
C Ceiling Canopy 1 pc
D Mounting Screw 3 pcs
E Lock Screw 3 pcs B
I
F Shade 1 pc
C
G Upper Rod 1 pc
H Medium Rod 1 pc
I Socket Assembly 1 pc
D
PREPARATION
● Before beginning installation of product, make sure all parts are present. Compare parts with package contents
list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate the
product. Contact customer service for replacement part.
● Estimated Assembly Time: 20 - 30 minutes
● Tool Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape,
Wire cutter, Safety glasses and (3) 100W A19 medium base bulbs .
● Helpful Tools (not included): Wire strippers.
1 OF 3
INSTALLATION INSTRUCTIONS STYLE NUMBER: LSP1826NR1, LSP1826BN1
STEP 1:
a. Screw the Socket Assembly, Medium Rod and Upper
Rod together as shown. Hand-tighten until snug.
Upper Rod
Medium Rod
Socket Assembly
STEP 2: Ceiling
a. Screw the Swivel at the bottom center of the Ceiling Canopy
Canopy into the top end of the Upper Rod. Hand-
tighten until snug.
Swivel
Upper Rod
STEP 3:
Crossbar
a. Secure the Crossbar to the Outlet Box with Outlet Box
Screws. Tighten until snug.
Outlet Box
Outlet Box Screw
2 OF 3
INSTALLATION INSTRUCTIONS STYLE NUMBER: LSP1826NR1, LSP1826BN1
STEP 4:
Outlet Box
Use Wire Connectors (not supplied) to connect the
WHITE OR RIBBED WHITE OR RIBBED
wires.
a. Connect the House Ground Wire to the Fixture Ground FROM HOUSE FROM FIXTURE
Wire.
b. Connect the House White (or Ribbed) Wire to the
Fixture Supply Wire (Black or Smooth Side). BLACK (OR RED) WIRE BLACK OR SMOOTH
c. Connect the House Black (or Red) Wire to the Fixture FROM FIXTURE
FROM HOUSE
Supply Wire (Black or Smooth Side).
d. Wrap each connection with approved electrical tape
and carefully stuff all of the connected wires into the GROUND WIRE GROUND WIRE
Outlet Box.
FROM HOUSE FROM FIXTURE
STEP 5:
a. Place the Ceiling Canopy onto the Outlet Box aligning Outlet Box
(3) holes on the edge of the Ceiling Canopy and
Mounting Holes on the Crossbar.
Crossbar
b. Using screwdriver, thread Mounting Screws into the
Mounting Holes on the Crossbar and hand-tighten until
snug to secure the fixture.
Ceiling Canopy
Mounting Screw
STEP 6:
a. Locate the Shade from the bottom of the Socket
Assembly. Attach the Tabs on the top edge of the Shade
to the end of the Side Arms. Thread the Lock Screws
into the Mounting Holes on the end of the Side Arms to Side Arm
secure the Shade. Hand-tighten until snug.
Mounting Hole
Socket Tab
Assembly
Lock Screw
Shade
STEP 7:
a. Install correct bulbs referring to fixture markings and/or labels for maximum wattage.
Your installation is completed now. Restore electricity. Retain this sheet for future reference.
3 OF 3