Professional Documents
Culture Documents
• Remote and difficult-to-access HART devices connected without expensive cables to the plant control room
• Tanks and silos integrated at minimal cost into e.g. SupplyCare Inventory Control software
• Endress+Hauser and 3rd party devices maintainable with open FieldCare Plant Asset Mangement software
• Network configuration also done within FieldCare Plant Asset Management software
Flexible solution ...
Open standard ...
WirelessHART
SupplyCare FieldCare
WirelessHART is a HART Communication Inventory Plant Asset
Foundation standard for use in process Control Management
automation. It adds wireless capabilities
to the HART protocol while maintaining
compatibility with existing HART devices,
commands, and tools. A WirelessHART
network comprises:
WirelessHART at a glance
• Dimensions: • Dimensions:
230 mm x 115 mm x 85 mm 90 mm x 90 mm x 75 mm
• Mounting: • Mounting:
top hat rail, wall or post mounting screw thread M20x1.5, NPT1/2, NPT3/4
• Power: • Battery life:
24 VDC 5–7 years for hourly update rate
• Signal output: dependent upon instrument type WirelessHART Fieldgate
HART OPC Server/Ethernet, Modbus • Operating frequency:
• Operating frequency: 2.4 GHz
2.4 GHz • Range under reference conditions:
• No of network participants: Outdoor 250 m, indoor 50 m
Max. 250, depending upon traffic • Ingress protection:
• Ingress protection: IP66
IP67 • Explosion protection:
• Explosion protection: Ex certificate: ATEX, CSA, or FM
Ex certificate: ATEX, CSA, or FM
WirelessHART Adapter
Supplementary Documentation
• FieldCare
Competence Brochure - CP001S/04/en
• SupplyCare
Innovation Brochure - IN007V/00/en
12.06/I.I.
Instruments International
Endress+Hauser
Instruments International AG
Kaegenstrasse 2
4153 Reinach
Switzerland
Tel. +41 61 715 81 00
Fax +41 61 715 25 00
http://www.endress.com
info@ii.endress.com
IN011S/04/en/04.08
71071558
HD/INDD CS2