Professional Documents
Culture Documents
The ACI Communications Drop Amplifier with a dedicated modem pass-through port is a house-type active device that delivers superior performance up to 1 GHz in todays expanding RF telecommunications networks. The modem pass through port has a switching relay that will keep the modem connection active if the residential power is lost and then return to normal operation once the power is resorted
The Drop Amplifier provides additional gain at the customer premise when needed as a result of long drops, multiple TV outlets, or multiple service requirements. Additionally, port 5 will maintain a signal for lifeline VoIP services if the residential power is lost. This is done by a switching relay that will detect the loss of power and switch into a passive mode with only port 5 active, and then automatically switch back to normal operation when the residential power is restored. The Drop Amplifier allows very versatile deployment. To install, simply locate and mount the amplifier, and then connect the RF input cable and the RF output cable(s) making sure to connect any VoIP services cable to the VoIP port. Since the amplifier is a DC powered device, powering may be achieved in two different ways. It can either be powered directly in a co-located situation through an externally mounted transformer or it may be powered remotely by an externally mounted transformer via the cable through a power inserter at the TV set location.
Features
Modem VoIP port pass-through is clearly marked for ease of installation. 4.0 dB forward gain & unity reverse gain on each of the four TV ports GaAsFET technologies Superior performance specifications for full channel loading at design bandwidth Low noise and excellent distortion performance Low power consumption Die-cast aluminum housing for excellent heat dissipation Remote or co-located powering capability 6 Kv combination wave surge protection on amplifier all ports (IEEE587 category B3) 6 Kv combination wave surge protection on the transformer (IEEE587 category B3). High performance F connectors - SCTE compliant 1002 MHz bandwidth Universal range AC power pack ensures normal operation under widely varying AC inputs.
Preliminary
PWR IN +12 TO 16 VDC
P5 VoIP
RF IN/OUT
PWR
VoIP
OUT
RF
IN
RLY
SST-5-S4PC
FWD
Forward Bandwidth: 54~1002 MHz Reverse Bandwidth: 5~42 MHz Forward TV Port Gain: 5 dB Reverse TV port Gain: 0 dB V in: 12 to 16 VDC I in Max 300 mA : SHOWN ENERGIZED
H L
RVS
H L
75 ?
TV2 OUT
TV3 OUT
TV4 OUT
P1
P2
P3
P4
NOTES
Max Min
550 MHz analog channel loading, 79 channels +320 MHz digital channel loading, 256 QAM at -6dBc relative to its associated visual carrier
Station Output Levels Levels out Station Distortions (Worst Case) Composite Triple Beat (CTB) Cross Modulation (XMOD) Composite Second Order (CSO) HUM Modulation dBmV -dBc -dBc -dBc dB 15 75 75 65 80
Confidential Information contained in this document is subject to change w ithout notice. Revision Date: 6/08/11
ACI Communications, Inc. reserves the right to discontinue the manufacture or change specifications without prior notice on any parts illustrated in this data sheet. Current drawings are available of 4 Page 2 upon request.
Communications, Inc.
www.acicomms.com