You are on page 1of 15

===================================================================== License Agreement for DocuPrint 205/255/305 ===================================================================== 1.

PROPRIETARY RIGHTS: Title, ownership rights, and intellectual property rights in the SOFTWARE shall remain in Fuji Xerox and its third party suppliers. You have no rights in the SOFTWARE except as expressly granted in accordance with this agreement. 2. LICENSE: Under this agreement, you are granted a non-exclusive license to use the SOFTWARE for the purpose of using with compatible Fuji Xerox products in Japan. You are not permitted to (1) assign, sublicense, sell, rent, lease, convey, or transfer the SOFTWARE to any third party by any tangible media such as floppy disk, magnetic tape, or CD-ROM, (2) distribute the SOFTWARE on a network or by a telephone line available to the public or (3) alter, modify, decompile, disassemble, reverse engineer, or create derivative works based on the whole or any part of the SOFTWARE. If any direction on usage or restriction for the SOFTWARE is expressly specified in this web site, you are required to follow such direction. 3. TERM: This agreement is effective upon installing the SOFTWARE until you terminate the agreement by destroying the SOFTWARE. This agreement will also terminate if you fail to abide by any terms of this agreement. In case of termination, you must promptly destroy the SOFTWARE. 4. LIMITED WARRANTIES: THE SOFTWARE IS SUPPLIED STRICTLY ON AN 'AS IS' BASIS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE. YOU ARE RESPONSIBLE FOR CHOOSING, MAINTAINING AND MATCHING OTHER HARDWARE AND SOFTWARE COMPONENTS IN COMBINATION OF THE SOFTWARE. IN NO EVENT, SHALL FUJI XEROX, FUJI XEROX CHANNEL PARTNERS, AUTHORIZED DEALERS AND THEIR THIRD PARTY SUPPLIERS BE LIABLE FOR ANY LOSS OR DAMAGE INCLUDING INCIDENTAL OR CONSEQUENTIAL LOSS OR DAMAGE, ARISING FROM USE OF OR INABILITY TO USE SOFTWARE, OR ANY MODIFICATION OF THE SOFTWARE. 5. EXPORT CONTROL: You are not allowed to export the SOFTWARE in part or whole, directly or indirectly, in violation of any restrictions, laws or regulations imposed by the government of Japan or any other relevant countries, and are required to obtain necessary approval prior to exporting the SOFTWARE. ===================================================================== Additional Information: DocuPrint 205/255/305 Microsoft(R) Windows(R) 2000/XP, Windows Server(R) 2003/2008, Windows Vista(R) Printer Driver Ver. 2.4.29 ===================================================================== This document provides information about the printer driver on the following items: 1. Requirements 2. File Configuration 3. Installation 4. Version Improvements

5. Limitations 6. Inquiries ---------------1. Requirements ---------------1. Please note that this printer driver operates on a computer with a 32-bit x86-based microprocessor (Intel 80486/25 and above) and an upward-compatible processor, running Windows(R) 2000, Windows(R) XP, Windows Server(R) 2003, Windows Server(R) 2008 or Windows Vista(R) English version. (For clock speed of the CPU and memory, make sure that the system configuration is recommended by the operating system.) 2. This printer driver works correctly with the combinations of the below mentioned printer software versions. * DocuPrint 205 * DocuPrint 255 * DocuPrint 305 Important ----------* To update the printer standard ROM version, please download the firmware from the web site listed in "6. Inquiries". ---------------------2. File Configuration ---------------------fxltpji.inf fxltpjiu.dl_ fxltpjim.dl_ fxltpjdm.dl_ fxltpjir.xr_ fxltpj.cd_ fxltpjp1.dd_ fxltpjp2.dd_ fxltpjp3.dd_ fxltpj.xr_ fxltpj.hl_ fxltpj.cn_ fxz3051.dl_ fxzddmif.dl_ fxlzjnie.dl_ fxzdhb32.dl_ fxlzcomp.dl_ fxlznie1.dl_ fxzadcjp.dl_ fxzarl32.dl_ fxzpmc1.dl_ readme.txt -----------------3. Installation -----------------You can install this driver by downloading from our web site. Standard ROM Version 1.0.0 or later Standard ROM Version 1.0.0 or later Standard ROM Version 1.0.0 or later

These methods of installation are described below. Important ---------* Close all the running applications before installing the printer driver. * Always reboot the computer after installing an upgraded version of the printer driver. * If you have deleted an older version of the printer driver, always reboot the computer before installing the new version. * The installation procedures are written with the assumption that standard settings have been configured in Windows. The procedures may differ if the start menu or folder options have been changed. * You may not be able to install correctly if installation is made using Power User rights. Re-install as an Administrator. * Installation may not be successful if this driver is not installed using the following procedure. * Please refer to the following steps about deleting method under Windows Vista(R) and Windows Server(R) 2008. * About driver deleting method (When using Windows Vista(R) or Windows Server(R) 2008) ** Installation from downloaded data via the web site You can download the latest driver from our web site. Refer to "6. Inquiries" for our web site address (URL). Communication charges will be borne by the customer. 1) Double-click the downloaded compressed file (.exe format) to decompress. 2) Activate the "Add Printer Wizard". 2a) For Windows 2000, click the "Start" button. Point to "Settings" and click "Printers". Double-click the "Add Printer" icon. 2b) For Windows XP, click the "Start" button. Point to "Settings" and click "Printers and Faxes". Click the "Add a printer" icon. 2c) For Windows Server 2003, click the "Start" button. Point to "Settings" and click "Printers and Faxes". Double-click the "Add Printer" icon. 2d) The following steps are available for use when installing printer under Windows Vista. * Click "Start" button and then click "Control Panel". * Select "Printers and Faxes" in "Hardware and Sound" and then select "Add a Printer". 2e) On Windows Server 2008, select menu in the order below from the "Start" button. Go to "Start" > "Control Panel" > "Printers". Select "File" > "Run as Administrator" > "Add Printer" on the menu. 3) Specify the printer connection. * For a local printer: 3-1a) For Windows 2000, select "Local printer". 3-1b) For Windows XP and Windows Server 2003, select "Local printer attached to this computer". 3-1c) When using Windows Vista or Windows Server 2008, please click "Add a local printer." Proceed to step 4). * For a network printer:

3-2a) For Windows 2000, select "Network printer" and click the "Browse" button. 3-2b) For Windows XP and Windows Server 2003, select "A network printer, or a printer attached to another computer". 3-2c) When using Windows Vista or Windows Server 2008, please click "Add a network Wireless or Bluetooth printer". Specify the desired printer from the network. Contact the network administrator if you have any queries. If other printers are installed, a message asking whether to set this as the default printer is shown. Click "Yes" if you want to set it as a default printer. Proceed to step 11). 4) Specify the printer port . Create a port if there is no output port. Please refer to the "Frequently Asked Questions" from our driver download page for the port creation method. For our URL web page, please refer to "6. Inquiries". 5) Click "Have Disk" from the "Add Printer Wizard" screen. An "Install From Disk" screen is displayed. Specify the directory containing the uncompressed files in step 1) in the "Copy manufacturer's files from" box. Click "OK". 6) A list of printers is displayed. Select the desired printer. If the selected printer is already installed, a message asking whether to replace the existing driver is displayed. When installing a new version of the printer driver, select "Replace existing driver". The older version of the driver cannot be deleted if it is used in an application. In this case, close the application. Note: The following printers will be listed. Select the correct printer driver. "FX DocuPrint 205" Printer driver for DocuPrint 205 "FX DocuPrint 255" Printer driver for DocuPrint 255 "FX DocuPrint 305" Printer driver for DocuPrint 305 7) A dialog box for specifying the printer name is displayed. To change the printer name, enter any name in the "Printer name" box. If other printers are installed, a message asking whether to set this as the default printer is shown. 7a) When using Windows 2000,Windows XP,Windows Server 2003, please click "Yes" button if you want to set a printer as default. 7b) When installing the driver on Windows Vista or Windows Server 2008, you can set the printer as the default printer by checking the check box displayed under "Printer Name". As the following steps are not applied to Windows Vista and Windows Server 2008, please proceed to step 13). 8) Specify whether to share this printer with other network users. 9) A dialog box specifying whether to print the test page after installation is shown. To perform test printing on the print driver, load letter paper to the printer, select "Yes" and then "Next". Select "No" and click "Next" if you do not wish to print the test page. 10) A dialog box to confirm the settings is displayed. Click "Finish" after confirming the settings. 11) A dialog box to confirm the continuation of installation is displayed. 11a) For Windows 2000, a message about the Electronic Signature cannot be found will be displayed but this does not cause functional problem. Click "Yes". 11b) For Windows XP and Windows Server 2003, a message saying

12)

13)

14) 15) 16)

that it did not pass the Windows Logo Test will be displayed but this does not cause functional problem. Click "Continue Anyway". The necessary files are copied and a new printer icon is created. If you have printed the test page, a printer test result confirmation message is displayed. By the above steps, the driver installation is completed. Please proceed to step 17). For Windows Vista and Windows Server 2008, this is the start of the driver installation. You can continue with the installation in the "User Account Control" dialog box. Click the "Continue" button to proceed. For users without administrator rights who wish to install the driver, select the option of user with administrator rights, enter the password and then click "OK". "User Account Control" dialog is not displayed when the driver is installed through "Run as Administrator". Please ignore the pop-up dialogue of "Windows can't verify the publisher of this software". Click "Install this driver software anyway." to continue with the installation. When the driver is installed through "Run as Administrator", the dialogs for common settings are displayed. Specify common settings in the dialogs and click "Next". The driver installation is completed. Click "Print a test page" button if you want to print a test page. Please refer to step 9) for the details of test page printing.

Next, we set the installed printer options. 17) Click the printer icon. 18) From the "Printer" menu, click "Properties". 19) Click the "Options" tab. Perform the setting when the "Options" tab is displayed. About driver deleting method (When using Windows Vista(R) or Windows Server(R) 2 008) ---------------------------------------------------------------------------------To remove drivers from the systems under Window Vista(R) or Windows Server(R) 2008 environment completely, please delete drivers and driver packages according to the following steps. * Click "Start" and open "Control Panel", then select "Printer" in "Hardware and Sound" panel. * Delete printer icon in "Printers and Faxes" folder. * Right-click in "Printers" folder and select "Run as Administrator". Click "Server Properties" then "Print Server Properties" window is displayed. * Select the driver to be deleted from the "Driver" tab and click "Remove" button. * Select "Remove driver and driver package.", then click "OK" button. * Restart the computer. -----------------------4. Version Improvements -----------------------This section describes the modifications made for each upgraded version. [Improvements from Ver 2.4.1] * Improved the problem where print jobs cannot be sent from MicroGDS.

* Improved the problem where the "." character is overlapped with the next character during printing when a specific font is specified. * Improved the problem where a specific document cannot be printed from Microsoft(R) Excel. * Improved the problem where print settings were not saved correctly when logged in with user rights. [Improvements from Ver 2.4.9] * Improved the problem where print jobs cannot be printed with a specific application on MetaFrame(R). * Improved the situation where documents may not be printed as specified in the Print Properties when printing in PowerPoint 2002/2003. * Improved the problem that collated output was not performed when printing from the specific application on Windows Server 2003. * Improved the situation where installation to Windows Server 2003 cluster may fail. * Improved the situation where text may be missing or overlapped when printing with fonts of fixed width. * Improved the phenomena where specified copies were not reflected correctly when printing from a specific application. * Improved the phenomena where specific characters cannot be printed correctly when font substitution is set. * Improved the phenomena where font substitution for bold text and italic text cannot be made correctly. * Rectified the problem that a new registry entry may be created at each log in when using ACCP (Auto Created Client Printer) by MetaFrame(R). * Improved the problem that specified paper source from application may be ignored after changing [Ignore Application Paper Source Settings]. [Improvements from Ver 2.4.17] * Rectified the problem of abnormal termination and hung-up of the application when loading/unloading print driver. * Improved the phenomena of print failure from a particular application. * Improved the phenomena where print errors occurred when image documents are printed from a specific application. * Supported "Windows Vista". * Improved the performance of printing when specifying unsupported trays in specific application. * Rectified the problem in printing graphics in documents correctly when printing from specific applications. * Improved the problem where the values for "Margins" cannot be saved when user rights is used for login. * Solved the problem that resolution specified on an application may not be correctly reflected on the output . [Improvements from Ver 2.4.25] * Fixed the problem that settings of "Header / Footer Options" may be changed to default. --------------5. Limitations --------------============================ Driver-Specific Limitations ============================

When installing multiple drivers to a single LAN Manager port ============================================================== When installing multiple drivers to a single LAN Manager port, follow the procedure mentioned below. * For Windows 2000 1) Double-click the "Add Printer" icon to display the "Add Printer Wizard" screen. Activate the "Add Printer Wizard" and click "Next". 2) Select "Local Printer" and click "Next". 3) Select the LAN Manager port to be connected from "Available ports" and click "Next". 4) Double-click "Have Disk", specify the folder in which you have saved the driver and carry out the installation as per the instructions. * For Windows XP 1) Click the "Add a printer" icon to display the "Add Printer Wizard" screen. Activate the "Add Printer Wizard" and click "Next". 2) Select "Local printer attached to this computer" and click "Next". 3) Select the LAN Manager port to be connected from "Available ports" and click "Next". 4) Double-click "Have Disk", specify the folder in which you have saved the driver and carry out the installation as per the instructions. Shared Printer =============== When printing via a shared printer on Windows NT (R) 4.0, if the printer is using the LPR port and "Spool print documents so program finishes printing faster" on the "Advanced" tab is selected, please specify "Start printing after last page is spooled". If you select "Start printing immediately", the results may be different from the screen. Local Printer for Windows XP, Windows Server 2003 ================================================== When "\\server\printer (LAN Manager port)" is used in the local printer for Windows XP and Windows Server 2003, if printing is executed when the printer is offline, the local printer may not be able to recover from the offline mode. If this happens, delete the LAN Manager port and reset the local printer settings. If LAN Manager port is used in the network printer, there should not be any problem. When setting the local printer, use other ports except LAN Manager or delete the existing LAN Manager port before creating the "\\server\printer (local port)" at the "New Port" of the "Add Printer Wizard". Installing network printer in Microsoft Windows Vista(R) and Microsoft Windows Server(R) 2008 ========================================================= * When installing network printer by "Run as Administrator", the printer may be added under the administrator account used for installation and not under the current user.

Driver installation by remote access on Microsoft Windows Vista(R) and Microsoft Windows Server(R) 2008 ================================================================== In the case of driver installation by remote access on Windows Vista or later versions, the process may not end normally. In such case, try again on Windows XP. Notice to the users in the Microsoft Windows 2000 Server and Microsoft Windows Server 2003/2008 cluster environment =============================================================== * Use the following OS for Client. Microsoft(R) Windows(R) 2000 (English version) Microsoft(R) Windows(R) XP (English version) Microsoft(R) Windows Server(R) 2003 (English version) Microsoft(R) Windows Server(R) 2008 (English version) Microsoft(R) Windows Vista(R) (English version) * When you specify Custom Paper Size in the cluster environment, make same setting at all of the physical node in the environment. * When clicking the "Get Information from Printer" button, if the "Search Printer" dialog is displayed, select "Specify Address" and enter the network address of the printer. *Driver Installation in the cluster environment (A) Microsoft Windows 2000 Server, Microsoft Windows Server 2008 Install the driver on each of standby node and active node, and then install it on virtual server. (B) Microsoft Windows Server 2003 Install the driver on virtual server. * Deletion of driver in the cluster environment (A) Microsoft Windows 2000 Server After the driver on the virtual server is deleted, delete the drivers on all standby nodes. (B) Microsoft Windows Server 2003/2008 Delete the driver on virtual server, and then delete it on each standby node. * To delete driver on standby node (b-1) Change standby node to active node. (b-2) Install a printer on virtual server. (b-3) Delete the driver on the virtual server. * To delete driver Delete printer icon first and delete the driver from "Server Properties". Then reboot the computer. Number of Copies ================= This driver allows you to print from 1 to 999 copies. Only one copy will be printed if the number of copies specified exceeds this range. Watermark Printing =================== When performing watermark printing with "Transparent" specified, some of the colors that appear on the screen may be different when actually printed.

Print Booklet and Print Header/Footer functions ================================================ When the page number printing is simultaneously specified for Print Booklet function and Print Header/Footer function, the page numbers may not be printed properly. Limitations during EMF Spooling ================================ When the "EMF Spooling" on the "Detailed Settings" tab is set to "On", the following functions may not operate properly. When using these functions, set the "EMF Spooling" to "Off". * Print Header/Footer * Secure Print * Sample Print * Create Forms (Register Forms and Print Overlay will operate properly.) * E-mail Job Confirmation * Use Document Monitor * Specify Job Owner * Extended Features From Application * Specify Margin Printing Huge Print Data ========================= For some applications, if a pasted image is printed at high resolution, the print data expands and may result in an extremely slow printing speed. The print data size of the output may be improved by changing the following settings of "Other Settings (Graphics Settings)" on the "Detailed Settings" tab. * Change "Resolution". * Change "Image Compression". Skip Blank Pages ================= Even with "Skip Blank Pages" selected, blank pages may still be printed in the following situations. * * * * The page contains only line feeds. The page contains only spaces. The page contains only line feeds and spaces. A white background drawing instruction is sent from the application.

Print Area =========== The print area will be extended when "Extended" is selected from "Print Area". Due to printer limitations, printing may not be performed up to the edges. Font Substitution ================== If a size equal or larger than 36 points is specified, the document may be printed with incorrect font substitution. Printing Bold Fonts ==================== When printing documents with bold fonts, the thickness of the characters printed from Windows 2000 and Windows XP and Windows Server 2003/2008 and Windows Vista may vary.

Missing Items in the Printout ============================== In some applications, images may be missing in the printout. If this happens, activating EMF spooling as shown below may remove the problem. * Set "EMF Spooling" to "On" on the "Detailed Settings" tab. Custom Paper Size ================== Administrator rights are necessary for changing the setting of Custom Paper Size. When using Windows Vista or Windows Server 2008, please modify printer properties according to the following steps. * Select the printer from the printer folder. * Right-click the printer, click "Run as administrator" and then select "Properties". * Click the "Continue" button in the "User Account Control" dialog box, and from the displayed properties, configure the settings. Favorites ========== When only a margin setting is changed, "Change" is not displayed in the "Favorites" combo box. Printer Error ============== An error may occur at the printer if one of the following situations occurs during printing. Follow the instructions on the printer UI or the user guide to resolve the error. * Driver properties from the application program are not displayed. * Printer settings on the application program are not reflected in the driver properties when displayed. * Printer settings are changed midway in a document. (E.g. document which has different paper sizes for every page.) * Continuous printing from multiple application programs. * When an optional device that was not installed to the printer was specified at the "Options" tab. Compatibility with Printer Font ================================ If a document using the printer fonts of other machine models is printed through this driver, then the results of printing will be different. Paper conventions in the printer ================================= For paper size that cannot be recognized by the printer, the measurement instead of the name of that paper size will be displayed on the printer. An alternate paper size that can be selected in the printer driver is displayed on the printer in brackets. * * * * COM-10 (105x241mm) C5 (162x229mm) DL (110x220mm) Monarch (98x191mm)

* Youkei 4 (105x235mm) The alternate paper size that can be selected in the printer driver is displayed on the printer in the following manner: Driver display Printer display -----------------------------------5.5x8.5" 140x216mm Names of Custom Paper Size =========================== If the names of custom paper size are the same as the existing ones in the print driver, the custom paper cannot be selected for output. If this happens, change the custom paper name. Paper Size =========== * The following Paper Size(s) are displayed on the menu, but it cannot be used. You can avoid this problem for the following Paper Size(s) by registering each paper size at the "Custom Paper Size" dialog box on the "Configuration" tab. In this case, please specify "Millimeters" for "Units". Postcard(100x148mm) Print Overlay ============== The alphabetical "Form Name" specified in the "Print Overlay" is case sensitive. Specify the correct case sensitive form name registered in the printer. As some applications paint the background in white to print, forms with overlay may be hidden. Such applications include Internet Explorer and WordPad. ================================= Application-Specific Limitations ================================= All Applications ================= * Depending on the application used by the customer, blank pages for page adjustment will be inserted automatically according to the conditions like the number of copies specified when outputting 2-sided prints. In this case, the blank inserts will be included by the application. The performance is improved by changing the setting below. - Check "Skip Blank Pages" on "Advanced Settings" tab. * The print layout may be changed when you change the "Resolution" of this driver. * In some applications, when the line width is set to thin lines, the selected dotted lines may be printed as solid lines instead. If this happens, select another line width. * When printing documents with image data such as photos, the processing time may increase. In such case, the processing time can be reduced by setting the "Image Compression" option

of "Other Settings (Graphics Settings)" on the "Detailed Settings" tab to "Photo". * When garbage text is printed, select "Always Use TrueType Fonts" from the "Fonts" tab when printing. * When a printed pattern or diagram is different from what you see on the screen, changing the following settings of "Other Settings (Graphics Settings)" on the "Detailed Settings" tab may alleviate the problem. * Uncheck the "High Speed Image Processing". * Check the "Draw the pattern with fine lines as per the resolution" check box. * Change "Resolution". * Change "Halftone Print". * Change the "Print Mode" from the "Graphics" tab. * Change the "Brightness" and "Contrast" from the "Graphics" tab. * The print result may overlap if Multiple Up is selected when printing a document that has exceeded the print area of the printer driver. * The following applications can print multiple copies in one document. Therefore, even if "Sample Print" is selected in "Job Type", the printing may be the same as "Normal Print". * * * * Adobe Lotus Lotus Adobe PageMaker7.0 1-2-3 2001 Freelance 2001 InDesign2.01

Adobe(R) Acrobat(R) ==================== Adobe(R) Reader(R) ==================== Changing the following settings may improve the printing result if the printed output is different from what you see on the screen. * Check the "Print Image" at the print dialog box of the application before printing. When printing a PDF file containing mixed sizes such as A4 portrait and A3 landscape, the printer driver is unable to separate and print pages of different sizes onto different paper in a single operation. To print on different paper sizes, separate the pages of different sizes into different print operations. To fit a mixed-size print output to a single paper size in a single print operation, select "Reduce" on the "Print" dialog box. For example, you can rotate and reduce an A3 landscape page to be printed on an A4 portrait paper. "Turn Image by 180deg" setting will not be reflected on the output result. Adobe(R) Illustrator(R) 9.0 ============================ "Paint" and "Lines" areas specified in the text may be printed incorrectly if printer fonts are used. If this happens, specify "Always Use TrueType Fonts" on the "Fonts" tab in the printer driver.

CorelDRAW(R) ============= When a printed pattern or diagram is different from what you see on the screen, changing the following settings may alleviate the problem. * Check "Paint Only Enclosed Areas" from the "Graphics" tab. Adobe(R) PageMaker(R) ====================== Images pasted at a tilted angle may be printed with dotted line grids. Corel(R) DESIGNER(TM) ====================== Objects that are drawn in solid lines may be printed in dotted lines. The print output may not look good, for example, lines and gaps may be seen in circle gradations. The print output may be improved by converting the gradations to images. JUSTSYSTEM(R) Ichitaro(R) ========================== Sometimes the partial printing may not be performed properly. Such cases can be avoided by the following method. * Before starting the application, open the default setting of the document from the Printer Folder and click "OK". Microsoft(R) Excel =================== When printing a book or multiple sheets in Excel, the second and subsequent sheets may not be printed as specified in the dialog settings. When you specify to print an entire book with mixed double-sided and single-sided sheets, each sheet is printed according to its individual print information. Batch printing is not performed. You can avoid this problem by doing the following: 1. Select another printer on the print dialog or page setup dialog of any sheet and close the document temporarily to activate the change. 2. Change the default value of the driver to the desired setting. (E.g. 2 Sided Print, 2 Up, etc.) 3. Open the document and select this driver on the print dialog before printing. The print layout may be changed when you change the "Resolution" of this driver. You may not be able to print if you change the port after installing this driver. In this case, delete the driver. Specify the desired port and install again. Microsoft(R) Internet Explorer =============================== When the output of the image data is different from what you see on

the screen, use the following method to resolve. * Change the "Resolution" setting of "Other Settings (Graphics Settings)" on the "Detailed Settings" tab. When Web pages containing Excel document are divided into multiple files and printed, you can use the following method to improve the printing. 1. Exit Internet Explorer. 2. Open the Properties of the printer driver from the Printers folder. 3. In the setting items list under "Other Settings" on the "Detailed Settings" tab, change the "Apply Zoom to Application" setting to "Off". Since File creation at printing is restricted on Internet Explorer in Protection mode on Windows Vista and Windows Server 2008, Form file can not be created even if "Create/Register Forms" is specified. Microsoft(R) PowerPoint(R) =========================== Depending on the font (e.g. MS-Mincho) and point size specified for a piece of text, the underscore (_) and the underline may overlap in the print output. Even if the overlap is not apparent because of the screen display ratio, the underscore (_) and the underline may overlap on the print output. When the output in black is different from what you see on the screen, use the following method to resolve. * Check the "Grayscale" on the Print dialog of the application and print. Microsoft(R) Word ================== Even if "Skip Blank Pages" is specified, when a blank page is included in documents, it may be output. When "Poster" is selected to print two or more copies of a single-page document, the copies will not be collated. You may not be able to print if you change the port after installing this driver. In this case, delete the driver. Specify the desired port and install again. Lotus(R) Freelance(R) ====================== Some of the settings such as paper source, print mode in the printer properties may not be reflected in the output. Fuji Xerox DocuWorks(TM) ========================= When printing a mixed size document, the printer may not be able to switch between different output paper sizes. Such cases can be avoided by the following method. * Display the "Printer Settings" dialog box using the "File"> "Printer Settings" menu. * Specify "Auto" from "Paper Source". --------------

6. Inquiries -------------Fuji Xerox Co., Ltd. Printer Support Desk Please check the telephone number to call on the "Maintenance/Operation Inquiries" card pasted on the machine. The latest software is available on our web site. http://download.fujixerox.co.jp/ Communication charges will be borne by the customer. "Microsoft", "PowerPoint", "Windows", "Windows NT", "Windows Server" and "Windows Vista" are registered trademarks of Microsoft Corporation, U.S.A. in the United States and other countries. Adobe, Adobe Illustrator, Adobe Acrobat, PageMaker, and Adobe Reader are trademarks of Adobe Systems Incorporated. "Corel DESIGNER" is trademark or registered trademark of Corel Corporation. Other company names and product names are trademarks or registered trademarks of the respective companies.

You might also like