You are on page 1of 4

FT2 - 10.

98

IS400 Product Data Sheet


FT2 - 10.98

Technical Characteristics
Mechanical Characteristics
Machine
Size Net weight Max. engraving area mm kg mm 435 x 610 x 893 42 305 x 210

Packaging
Overall size Weight (packaging + machine) mm kg 1020 x 750 x 670 68

Vice
Max. length Maximum object weight Max. opening Height of jaws Spindle and jig clearance mm kg mm mm mm unlimited x 230 20 230 75 33

Standard spindle
Tool Type Diameter Max. rotation speed Spindle displacement speed Off-load travelling speed Working speed up to Spindle travel in Z direction mm 40 mm/s mm/s 60 35 mm inches tr/min. Rotating, top-loading 4.36 11/64 20000

IS400 product data sheet . 1

FT2 - 10.98 Max. precision X Y Z Levelness X Y mm mm 0.2 0.2 mm mm mm 0.0127 0.0127 0.0127

Free field sound signal to operator's stand/s according to norm ISO 11201. (* according to Gravograph standard)
off-load* nominal engraving* nominal engraving peak* LAeq LAeq Lp Cpeak db(A) db(A) db(C) < 72 1 80 2 < 95

Environment *according to norm EN60721


Operational temperature* Storage temperature * Degree of moisture when in use - Min. - Max. - Mini. - Maxi % C C C C +5 +40 -5 +45 20 to 80

Electrical Characteristics
Machine
Power supply Max. absorbed current Frequency Output Insulation Type of service Electromagnetic compatibility Type of protection Degree of protection Emission : Immunity : V A Hz W Classe 100 - 240 3.5 50 - 60 300 1 S1 norm NF EN 50081-1 (residential environment) norm NF EN 50082-2 (industrial environment) Fuse 5 x 20 mm 4A F1T IP40

Spindle motor
Type Output Absorbed current Speed W A tr/min. Continuous current 70 2.5 3700-7500

Displacement motor
Stepper motor step/revs 200

IS400 product data sheet . 2

FT2 - 10.98

Electronic Characteristics
Electronic cards
UC board Type of microprocessor Clock RAM EPROM Flash Power board Supply V A W Spindle motor Stepper motor V W V W 5 / 13.5 / 12 / 24 1 / 0,8 / 0,1 / 2,1 5 / 11 / 1,2 / 50 17 - 35 (max.) 70 40 40 MHz Mo Ko MOTOROLA 68000 10 2 512

Other Equipment
Hard disk Capacity Disk drive Disk type Capacity Capture keyboard Number of keys Type Monitor Resolution Size Screen Control panel Number of keys Type Display 12 Membrane with raised tactile points LCD 2 lines of 20 characters lines x points inches Not available inches Ko Not available Not available Not available

Connexions - Liaisons
Parallel Serial RS232 Memory card 38 points

IS400 product data sheet . 3

FT2 - 10.98

Software characteristics
Languages File formats ITA, SPA, NL, JAP, FRA, ENG, GER HPGL standard HPGL open software

Optional accessories
Pen attachment
Reference (user manual) Weight Ext. dimensions Maximum object weight Min.-max. diameter Max. length Kg mm kg mm mm

D2524 000
D2136 799 1.150 270 x 135 x 74 0.3 5 - 15 160

Cylinder attachment
Reference (user manual) Weight Ext. dimensions Maximum object weight Min.-max. diameter Max. length Kg mm kg mm mm

D2521 000
D2135 799 4.7 450 x 220 x 150 - 110 200

Vacuum table
Reference (user manual) Ext. dimensions Max. extraction surface Max. engraving area Spindle clearance mm mm mm mm 353 x 360 x 30 310 x 210 305 x 210 25

T-slot table
Reference (user manual) Ext. dimensions Max. engraving area Spindle clearance mm mm mm

D2502 000
D2097 799 314 x 404 x 85 305 x 210 30

Spindles
Collet Diamond Rotring High frequency Pyroengraver B2701 000 A0140 100 A0274 000 Not available A0270 100

IS400 product data sheet . 4

You might also like