Professional Documents
Culture Documents
Version : R6.1
www.Prepking.com
www.Prepking.com
1. Click the Exhibit button. Which command clears this intrusion record?
A. DELETE /INTRUSION_RECORD "XARA/0003440121:SMITH" B. DELETE /INTRUDER XARA/0003440121:SMITH C. SET AUDIT /DELETE /INTRUSION_RECORD "XARA/0003440121:SMITH" D. DELETE /INTRUSION_RECORD /SOURCE="XARA/0003440121:SMITH" Answer: A
2. What is the purpose of Autoconfigure? A. Detect devices and load drivers. B. Detect and start layered products. C. Detect and automatically configure tape density. D. Automatically select interconnect signal paths. Answer: A
3. The command MONITOR MODES/ALL shows that more than 70% of the CPU is consumed in INTERRUPT mode. What is the most likely problem? A. A user is failing to respond to the systems request for attention. B. External lock requests are consuming local CPU resources. C. The processor is consumed by internal Kernel requests. D. A faulty device is continually interrupting the processor. Answer: D
4. To prevent autogen from changing customized system parameters, add paramaters to A. AGEN$ADDHISTORY.DAT B. ALPHAVMSSYS.PAR C. SETPARAMS.DAT
www.Prepking.com
D. MODPARAMS.DAT Answer: D
5. When physical memory consumption reaches a certain level the system Select THREE. A. recovers pages from process working sets B. stops dormant processes C. swaps processes out of memory D. flushes the modified page list E. allocates pages from paged pool F. recovers pages from the pagefile Answer: ACD
6. By default, which file stores the system audit records? A. SYS$SYSTEM:SECURITY_JOURNAL.DAT B. SYS$MANAGER:AUDIT_SERVER.AUDIT$JOURNAL C. SYS$MANAGER:ACCOUNTNG.DAT D. SYS$MANAGER:SECURITY.AUDIT$JOURNAL Answer: D
7. A SHOW SYSTEM command shows many processes in the RWMPB state. What is the most likely reason? A. Excessive disk consumption. B. Excessive pagefile consumption. C. Excessive swapfile consumption. D. Excessive multiprocessor synchronization. Answer: B
8. Layered product startup procedures can be included into the system bootstrap utilizing Select TWO. A. the install utility B. the sysgen utility
www.Prepking.com
9. The growth path of a process working set is from A. WSAUTH to WSDEFAULT to WSEXTENT B. WSQUOTA to WSEXTENT to WSAUTH C. WSDEFAULT to WSQUOTA to WSEXTENT D. WSQUOTA to WSDEFAULT to WSEXTENT Answer: C
10. Which principal system components evaluate system performance? Select THREE. A. CPU B. storage C. I/O D. cache E. internal bus bandwidth F. memory Answer: ACF
11. The free page list is a A. cache of physical pages available for allocation B. list of zeroed pages available per process C. list of free process pages available for deallocation D. cache of free physical pages available to the modified page list Answer: A
12. Autogen reads the MODPARAMS.DAT file during which phase? A. savparams
www.Prepking.com
13. SYLOGICALS.COM is used to define A. network-wide system logical names B. domain-wide logical names C. system specific logical names D. user specific logical names Answer: C
14. Which command correctly terminates the AUDIT_SERVER process? A. STOP AUDIT_SERVER B. SET AUDIT /SERVER=TERMINATE C. SET AUDIT /SERVER=EXIT D. SHUTDOWN AUDIT_SERVER Answer: C
15. Which function does the JOB CONTROL process perform? A. Replies to user requests for tape mounts. B. Creates interactive, batch, and symbiont processes. C. Copies the contents of error buffers to errorlog files. D. Creates the LNM$JOB logical name table. Answer: B
16. Which image is first to utilize the system parameter file during bootstrap? A. vmb.exe B. apb.exe C. sysboot.exe
www.Prepking.com
D. sysinit.exe Answer: C
17. Which of the following starts system processes such as JOB_CONTROL, OPCOM, and ERRFMT? A. SYSINIT.EXE B. STARTUP.COM C. SYSTARTUP_VMS.COM D. SYSBOOT.EXE Answer: B
18. What is the correct console command required to force an AlphaServer GS series system to crash? A. >>> D/PS:1F00 >>> D/PC:FFFFFFF0 >>> CONT B. >>> D PS 1F00 >>> CONT C. >>>bugcheck D. >>>crash Answer: D
19. To display the execution of the startup command procedure while booting, you conversational boot and set A. STARTUP_P1 to "verbose" B. STARTUP_P2 to "yes" C. STARTUP_DISPLAY to "full" D. STARTUP_DISPLAY to "verbose" Answer: B
perform a
20. Based on the message format, "%facility-s-identification, text", where "s" represents the severity, what would a severity level of "e" represent?
www.Prepking.com
A. The output or program result is incorrect, but the system may attempt to continue execution. B. The output or program result is incorrect. The system cannot continue to execute the request. C. The system has performed your request. The message provides information about the process.
D. The command may have performed some, but not all, of your request. Answer: A
21. The command to specify that DECwindows client programs use node XARA as the DECwindows server, running over DECnet protocol is A. DEFINE DECW$DISPLAY XARA:: B. SET DECWINDOWS/NODE=XARA/TRANSPORT=DECNET C. SET DISPLAY/CREATE/NODE=XARA D. CREATE/DISPLAY/NODE=XARA/PROTOCOL=DECNET Answer: C
22. Which lexical function returns accounting, status, and identification information for a process? A. F$PROCESS B. F$GETJPI C. F$USER D. F$GETJOB Answer: B
23. After execution of the commands $ SYM="This is a local symbol" $ SYM=="This is a global symbol" the output of the command $ SHOW SYMBOL SYM will be A. SYM = "This is a local symbol" B. SYM == "This is a global symbol" C. SYM = "This is a local symbol"
www.Prepking.com
SYM == "This is a global symbol" D. %DCL-W-ABSYMB, ambiguous symbol - supply more characters \SYM\ Answer: A
24. Match each object with the most appropriate description. Objects A. B. C. D. verb qualifier keyword parameter
Description 1. the object of the command 2. modify the action of the commands 3. defines the action to be performed 4. reserved word used in certain specified formats A. A-3; B-2; C-4; D-1 B. A-3, B-4, C-1, D-2 C. A-2, B-1, C-3, D-4 D. A-4, B-3, C-2, D-1 Answer: A
25. Which command deletes a logical name TROLL from the group logical name table? A. DELETE/LOGICAL TROLL B. DEASSIGN/TABLE=GROUP TROLL C. DEASSIGN/GROUP TROLL D. DELETE/TABLE=GROUP TROLL Answer: C
26. By default, the log file for a batch job is Select TWO. A. not created
www.Prepking.com
B. created in the same directory as the batch procedure C. created in the job owners' SYS$LOGIN directory D. printed on queue SYS$PRINT, then deleted E. given the same protection as the batch procedure Answer: CD
27. Click the Exhibit button. The command procedure P.COM is invoked with the command: $ @P HELLO
28. The term "working set" refers to the A. processes that are currently residing in the system's balance set B. virtual pages that are mapped by a process that is in the CUR state C. virtual pages that are currently valid in the global page table D. virtual pages of a process that are currently valid and in physical memory Answer: D
29. A customer needs to share large amounts of data among eight OpenVMS systems. To minimize operating costs, these systems are treated as a single system management domain. Which technology provides these benefits? A. high capacity removable media
www.Prepking.com
100% Pass Guaranteed or Full Refund Word to Word Real Exam Questions from Real Test Buy full version of exam from this link below http://www.prepking.com/HP0-651.htm