Professional Documents
Culture Documents
Introduction
The Allied Telesis SwitchBlade x908 is an industry leading switch, delivering a new generation of high performance. The SwitchBlade x908 provides scalable and application versatile switching solutions, spanning the core, aggregation layer and edge, for today's Enterprise networks.
Key Features
8 High speed expansion bays 2 High speed connectors on the rear of the chassis, for use as high availability links between two SwitchBlade x908s. 2 Hot-swappable chassis fan modules Hot-swappable, load sharing PSUs AlliedWare Plus Operating System
Quality of Service
Policy based QoS features Highly configurable traffic classification Extensive remarking capabilities, to fit in with any networks QoS scheme Control plane traffic prioritisation Mixed scheduling, to support complex traffic queuing requirements 8 CoS queues per port Twin-rate three-level (green, yellow, red) bandwidth metering, with burst sizes for improved TCP-IP bandwidth limiting performance and bandwidth resolution down to 1Kbps Low switching latency essential for Voice over IP (VoIP) and real-time streaming media applications
SwitchBlade x908
3RU Chassis Full rack width 8 x 60 Gbps expansion bays Hot swappable PSUs 1 + 1 PSU redundancy 10 GbE aggregator High density GbE XEM expansion modules are compatible with the x900-24X and x900-12XT/S Fully non-blocking backplane
High Performance
A 640Gbps switch fabric can process 476 Million packets per second All ports are non-blocking
Multicast
Wire-speed IPv4 multicasting PIM-SM IGMP, IGMP Snooping, IGMP proxy
At a Glance
Optional 10GbE uplinks and 12-port gigabit
Security
SSHv1.5/2 for management 802.1x port authentication Dynamic VLANs Private VLANs Port-based security Wire speed hardware-based filters Broadcast and multicast storm control
copper or fiber expansion modules. 2 x 80Gbps stacking connectors on the rear of the chassis for use as high availability links between two SwitchBlade x908s. The XEM-STK stacking module provides two proprietary 30Gbps stacking links for up to 2 devices. Advanced features include comprehensive Quality of Service (QoS), VLAN Double Tagging, hot swappable chassis fan modules, hot-swappable load sharing AC/DC power supplies.
The SwitchBlade x908 is a highly
Management/SCP
TFTP/HTTP for file transfer Industry standard CLI SNMPv3 with extensive MIB support Trigger facility RMON Scripts Traps
Layer 3 Features
Up to 256K Layer 3 IPv4 address table entries 4096 Layer 3 interfaces Advanced routing protocols OSPF, RIP and RIPv2 Support for equal cost multi path (ECMP) routing in hardware VRRP Support for 10Kbyte Jumbo frames
Allied Telesis
www.alliedtelesis.com
Service Provider
Delivery of high-quality voice, video, and data services at the metro edge and aggregation layer. Central office aggregation of long distance links to points of presence (PoPs). Head-end aggregation of broadcast and Video on Demand (VoD) servers. DSLAM aggregation at PoPs. Metro network access - Customer Premises Equipment (CPE) for Multi-tenant unit or leased offices. Data center, web hosting, and server co-location. Ethernet Protected Switched Rings (EPSR) and 10 GbE modules allow for the SwitchBlade x908, with a number of x900 switches or iMAPs, to form a high speed protected ring with sub 50ms failover. This feature is perfect for high performance at the core of Enterprise or Provider Access networks 10 Gigabit uplinks for maximum throughput of traffic. For more information refer to the SwitchBlade x908 datasheet.
SMB
Core of SMB Gigabit to the desktop Variety of Gigabit options, 10 GbE capability Expandibility
Enterprise
Aggregation in large Enterprises with good non-blocking 10GbE port density. Stacking two units together, using the 80Gbps stacking bus on the SwitchBlade x908, providing a reliable, resilient, redundant core solution. A cost-effective 10 Gigabit network core Gigabit to the desktop for bandwidth hungry applications. Hot-swappable load sharing PSUs.
Allied Telesis
www.alliedtelesis.com
Vendor Model
Ports Line card slots Proprietary stacking ports 8 2 fixed stacking connectors on the rear of chassis providing up to 160Gbps of stacking bandwidth. The Stacking XEM module allows between 2 and 4 nodes to be aggregated 8 with optional 1 x 10GE XFP hot-swappable expansion modules 96 (RJ45 or SFP) 96 GbE2 6 None 12 None 3 None 6 None
24 - 4:3 blocking
48 -4:3 blocking
Max GbE ports Max PoE ports Switching Core Throughput performance IPv4 address table size (routes) Switching Capacity Back Plane Bandwidth / Fabric Fabric Rate Forwarding Rate Power Supply AC Power Supply DC power supply Power Consumption Physical Height Depth Cooling Operating Temperature
Dual Hot swap load sharing power supply Dual Hot swap power supply 510W with 1 PSU and 8 XEMs (predicted)
4U 451mm Side to side 0C to 55C (32F to 131F); 0C to 40C with J8705A, J8706A, or J8707A modules installed 0C to 55C (32F to 131F); 0C to 40C with J8705A, J8706A, or J8707A modules installed 0C to 40C (32F to 104F) 0C to 40C (32F to 104F
Allied Telesis
www.alliedtelesis.com
Vendor Model
Routing
IPv6 switching
No (IPv6-ready in hardware)
No (IPv6-ready in hardware)
No
No
Routing Protocols
BGP-4 BGP route filtering / route mapping DHCP snooping DHCP option 82 Local proxy ARP / MAC forced forwarding
No No No Yes No
No No No Yes No
Yes (licenced) No No No No
Yes (licenced) No No No No
CoS Queues / port (Priority queuing levels) RED curves for drop precedence
8 Yes
8 Yes
8 Yes
Yes - either generalised or Yes taildrop (3 queues each with their own drop curve) Yes Yes Yes Yes Yes Yes Yes Yes Yes No
Marking and Remarking WRED curves for drop precedence Max bandwidth per port Min/Max bandwidth per traffic class Single rate, three-level traffic metering (RFC 2697) Twin rate, three-level traffic metering (RFC 2698) Assured Forwarding (RFC 2597)
Expedited Forwarding
Yes
No
No
No
No
Yes Yes
Yes Yes
Yes Yes
No No
No No
(RFC 2598) Virtual LANs (IEEE 802.1Q) Port based VLANs Protocol based VLANs IP subnet based VLANs VLAN Double Tagging (Q in Q)
3 Scheduled to be available late 2008
Allied Telesis
www.alliedtelesis.com
RoHS
Allied Telesis RoHS-compliant product conforms to the European Union Restriction of the Use of Certain Hazardous Substances (RoHS) in Electrical and Electronic equipment. Allied Telesis ensures RoHS conformance by requiring supplier Declarations of Conformity, monitoring incoming materials, and maintaining manufacturing process controls.
USA Headquarters | 19800 North Creek Parkway | Suite 100 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895 European Headquarters | Via Motta 24 | 6830 Chiasso | Switzerland | T: +41 91 69769.00 | F: +41 91 69769.11 Asia-Pacific Headquarters | 11 Tai Seng Link | Singapore | 534182 | T: +65 6383 3832 | F: +65 6383 3830
www.alliedtelesis.com
2008 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners. 618-32-007-00-Rev. E