You are on page 1of 1

Crane name/number

CRANE OPERATOR DAILY INSPECTION CHECKLIST Crane type: Crane capacity Date of inspection:

Location:

Operators name:

Hour Meter: Start:___________________ Stop:___________________ Oilers name:

Total hours operated:

INSTRUCTIONS: Check all items indicated. Inspect and indicate as satisfactory = S, Unsatisfactory = U, or not applicable = N/A Walk around U S N/A Operator Cab U S N/A inspection Inspection Safety guards and Gauges plates Carrier frame, rotate Warning & indicator base lights General hardware Control/brakes Wire rope Visibility Reeving Load rating charts Block Safety devices Hook Emergency stops Sheeves List/trim indicators Boom/Jib Boom Angle/Radius Indicator Gantry, pendants, boom Machinery House U S N/A stops Inspection Walks, ladders, Housekeeping handrails Wind locks, chocks, Engine/Compressor stops Tires, wheels, tracks Leaks - Fuel, lube, Oil, Water Leaks-Fuel, oil, lube, Lubrication water Radius indicator Battery Outrigger/locking device Lights Glass Operation Inspection U S N/A Area safety Unusual noises Control Action Brakes/boom/load/ rotate Crane stability No load test Fleeting sheeve Limit switches Operators signature: Clutch/Brake linings Electric motors Warning tags Fire extinguisher Comments:

Supervisors signature:

This checklist is based on EM 385-1-1, dated 3 September 1996. Use of this checklist is optional.

You might also like