Professional Documents
Culture Documents
Transforming energy
into solutions
Three Phase Induction Motors
Medium and High Voltage
In conjunction with a world renown consultant company, WEG developed its three phase induction motors which
allow easy maintenance and high performance level. Divided in two different lines, M Line and H Line, the WEG
three phase induction motors became the best solution for those applications requiring such motors.
Due to its mechanical design flexibility, M Line (Master) motors can be applied on a wide variety of applications
with different operational requirements. In addition the M Line can be easily modified to match existing motors.
H Line (High Performance) motors have been designed in such a way to withstand the most demanding applications
and are regarded as both a reliable and low maintenance cost solution under such conditions.
With the application of modern software’s which were developed in conjunction with Universities of
Europe, USA and Brazil ensuring high design accuracy, WEG provides superior performance from these
machines.
Optimized design, quality of materials used, associated with manufacturing process duly controlled on
all production phases make these motors suitable for several market segment applications including
mining, sanitation, cooling systems, cement, oil and gas, steel plants, pulp and paper and others.
In order to comply with highly demanding world markets, WEG has its Quality System certified by Bureau
Veritas Quality Institute in accordance with ISO 9001 requirements. As well as ISO 14001 environment
certification, all WEG medium and high voltage motors are also certified by internationally recognized
certifying institutions such as CSA (Canada) and PTB (Germany).
M Line - Master
MOTOR LINE
M – Master Line
ROTOR TYPE
G – Squirrel cage
A – Slip ring (Wound rotor)
COOLING METHODS
A – Open self-cooled
D – Self-cooled by ducts, air inlet and outlet
T – Forced cooling, air inlet and outlet by ducts
V – Forced cooling, cooling on top of motor and air outlet by ducts
F – Self-cooled with air-to-air heat exchanger, heat exchanger on top of motor
R – Self-cooled with air-to-air heat exchanger, heat exchanger around the stator
I - Forced cooling on the internal and external air flow, air-to-air heat exchanger
W – Air-to-water heat exchanger
L – Air-to-water heat exchanger, forced cooling on the internal air flow
FRAME
IEC 280 to 1800
NEMA 4400 to 28,000
FEET HOLES
IEC (S, M, L, A, B, C, D, E)
NEMA (06,07,08,09,10,11...)
H Line - High Performance
MOTOR LINE
H - High Performance Line
ROTOR TYPE
G – Squirrel cage
COOLING SYSTEM
F – Enclosed, finned, internal and external air flow
FRAME
IEC 315 to 630
NEMA 5000 to 10,400
FEET HOLES
IEC (L, A, B, C, D, E)
NEMA (06,07,08,09,10,11...)
Applications
Supply: MAF400, 331kW (440HP), Supply: MGF8809, 930kW (1240HP), Supply: MGF630, 1070kW (1430HP),
6600V, 6 poles 4160V, 2 poles 13,200V, 8 poles
Application: Conveyor belt Application: Pump Application: Pump
Vertical Shaft Motors
WEG also offers medium and high voltage vertical shaft motors.
These motors can be supplied with either grease lubricated ball
or roller bearings, or angular contact bearings. Depending on
the application, specially when subject to high inertia and high
thrust loads, vertical motors can be supplied with oil lubricated
roller bearings or sleeve bearings. H and M vertical shat motors
are designed and manufactured to meet customer requirements
for pump, crusher, mixer applications, among others.
Supply: HGF355, 290kW (390HP), Supply: HGF450, 630kW (845HP), Supply: HGF450, 810kW (1086HP),
3300V, 4 poles 6600V, 2 poles 4000V, 6 poles
Application: Centrifugal pump Application: Blower Application: Debarker
Constructive Characteristics
Frame
Manufactured either with welded steel plates or cast iron, the frame is motor structural
component that accommodates, supports and protects the active magnetic part of the
motor. Its rugged construction offers excellent mechanical strengthen to the motor along
with low vibration levels.
Stator
Regarded as the static magnetic part of the motor, the stator consists of a steel laminated
core. The coils forming the stator winding are fitted into the lamination core slots. The
stator core is mounted directly on the motor frame.
Winding
The winding process supplied by WEG is specially designed and specified for the
voltage and application they are intended for. Medium and high voltage motor coils are
manufactured with rectangular copper wire, form-coiled and totally mica tape insulated.
Conductive and semi-conductive tapes are also used to insulate the coils to ensure
improved resistance to corona effect.
Insulation System
WEG MICATHERM insulation system is based on the “Vacuum Pressure
Impregnation” (VPI) system, which was developed in conjunction with
renown suppliers of insulating materials all over the world.
Applying special epoxy resin, this system provides perfect to the motor
protection process which has no emission of harmful gases to the
environment.
The VPI system for many years has been reliable and efficient on electric
rotating machines for a wide variety of applications. The insulation system
is applied on medium and high voltage machines manufactured with form
coils ranging from 380 to 15,000V.
Balance
WEG counts on a series of equipment to perform balance up to 3600rpm.
Computerized equipment allow accurate balance on all rotors. As a
consequence, WEG motors present significantly reduced noise levels.
The standard balance is provided in two planes. However, the company has
the capability of providing three plane balancing whenever required or when
requested by the customer.
WEG medium and high voltage motors can be supplied with usual cooling methods which may vary based on the type
of machine to be driven, by the application and environment conditions.
H LINE
Totally Enclosed
Self-cooled
IC411 (TEFC)
IP(W)55 / IP(W)56 / IP(W)65
Totally enclosed
Forced cooling
IC416 (TEBV)
IP(W)55 / IP(W)56 / IP(W)65
M LINE
Totally enclosed
Air-to-air heat exchanger
IC611 (TEAAC)
IP(W)55 / IP(W)56 / IP(W)65
MGF, MAF
Totally enclosed
Air-to-water heat exchanger
IC81W (TEWAC)
IP(W)55 / IP(W)56 / IP(W)65
MGW, MAW
M LINE
Totally enclosed
Independent cooling
Air-to-water heat exchanger
IC86W (TEWAC)
IP(W)55/IP(W)56/IP(W)65
MGL, MAL
Totally enclosed
Independent cooling
Air-to-air heat exchanger
IC666 (TEAAC)
IP(W)55/IP(W)56/IP(W)65
MGI, MAI
Non-contaminated area
Non-contaminated area
Non-contaminated area
Totally enclosed
Self-cooled by ducts
IC31 (TEPV)
IP(W)55/IP(W)56/IP(W)65
MGD, MAD
Non-contaminated area
Independent cooling
by ducts
Non-contaminated area
Non-contaminated area
IC37 (TEPV)
IP(W)55/IP(W)56/IP(W)65
MGT, MAT
Open (Self-cooled)
IC01 (ODP)
IP23 (WP-I)
IP(W)24 (WP-II)
MGA, MAA, MGP, MAP
Independent cooling Cold air Cold air Could air Could air
IC06 (OIV)
IP23 without ducts
IC26 (OIV)
IP(W)24 with ducts
MGV, MAV
Accessories and Special Features
Standard Accessories
- Temperature detectors - PT-100 – in the stator winding
- Temperature detectors - PT-100 – in the bearings
- Space heaters
- Shaft grounding brushes for VFD applications, or all motors in frame size 450 and larger.
Special Accessories
- Vibration detectors
- Bearing
Thermometer
Oil thermometer
Oil flowmeter
Lubrication hydraulic unit
Oil pressure system (Hydrostatic Jacking)
- Capacitors
- Lighting arresters PT-100 in the bearing
- Current transformer (CT)
- Independent cooling
- Temperature detectors for air inlet and outlet (cooling)
- Air thermometer (cooling)
- Position indicators (encoder or tacho-generator)
- Air-to-water heat exchanger
Water flowmeter
Water flow sight glass
Water thermometer
- Water leakage indicator
- Anchorage plate
- Noise muffler
- Surrounding muffler
- Speed non-reversing ratchet (vertical shaft motors)
- Rail base Rail Base
Special Features
- Mounting
- Special painting
- Class H insulation (only for low voltage)
- Reduced vibration level
- Reduced noise level
- Degree of Protection IP56 / IP65
Tapered shaft
- Labyrinth taconite
Labyrinth taconite
- Sleeve bearing
- Oil lubricated ball or roller bearings
- Oil-Mist bearings
- Special shaft:
Tapered shaft end
Double shaft end
Hollow shaft
Special shaft end
- Squirrel cage rotor material
Copper Surrounding Muffler
Brass
- Modified main connection box
- Additional main connection box
- Protection for classified area motors
EEx n (Non spaking) NEC
EEx e (Increased Safety) NEC
EEx p (Pressurized) NEC
Type Tests
All routine tests
Vibration measurement at cold
Breakdown test
Temperature rise test
Load test at constant voltage
Special Tests
Noise level
Shaft voltage
Overspeed
Vibration analysis
Curve performance
Full spectrum noise
Service and Costumer
Services
Customer Services
WEG offers its customers complete service and after service support. Included in this package of
services are response to general requirement and field service such as identification of problem causes
and commissioning of machines. In addition to that, its skilled Service Team is permanently available
to give prompt support all over the world.
Manuals supplied together with the equipment provide detailed and precise information related to safety,
installation and maintenance instructions.
WEG Service Department counts on a qualified and well-trained team capable to provide support on
any field requirement with the application of modern equipment so as to ensure reliable results.
Service
As leading provider of motors and generators, WEG offers a complete package of additional services to
its customers including repairs, rerating of small and large size machines, including other manufacturers
machines, specialized applications within the following scope:
- DC traction motors and generators (AC)
- Squirrel cage and slip ring motors in output ratings up to 50,000kW (70,000HP) and voltages up
to 13,800V
- Synchronous generators, brushless or with brushes, medium and high voltage
When performing repair services, WEG employs the same technology and facilities used on the plant
manufacturing process for superior performance.
632.10/062005
WEG EXPORTADORA
Av. Prefeito Waldemar Grubba, 3000
89256-900 - Jaraguá do Sul - SC - Brazil
PHONE: 55 47 372-4002 - FAX 55 47 372-4060
www.weg.com.br