Professional Documents
Culture Documents
AC Drilling Motor
Joliet Equipment Corporation... the quality source for Drilling Motors. For more than 70 years our motors have delivered Quality, Value and Reliability... Day-inDay-out.
The Joliet Horizontal AC Drilling Motor delivers a continuous 1800 HP rating for mud pump and rotary table applications and boasts an impressive intermittent rating of 2250HP for drawworks duty. The continuous rating is at 600VAC, 1600 Amperes, 45.6Hertz, 800/3000 RPM. Joliets HTM1800 has proven reliability throughout the drilling & marine industries and continues to meet & exceed all expectations. The Joliet HTM1800 provides competitive pricing and unsurpassed quality.
Features
Form Wound 6-Pole Stator. Class H Insulation. Copper Alloy Rotor Bars and End Rings. Inverter Duty. 4532 Alloy High Strength Forged Shaft for Radial Load. OPE Insulated Bearing. Pressurized connection box (IP56) mounted on left side of motor as viewed from commutator end, with bolt on cable connections and terminations for pressure sensor, thermostat, space heater, lockout switch & blower unit. Connection box can be specified on right side. DE- Roller Bearing for Axial Load. Blower Assembly; 25hp Explosion Proof, 3 Phase, 60 Hz, 460 Volts. Pressure sensor, Explosion Proof. Space Heater, 120/240 Volt, Explosion Proof. (6) Winding RTDs (100 Ohm). Speed Sensor Mount. Motor is dimensionally interchangeable with a GE 752 motor. Motor Enclosure: IP44. Altitude Below 3,300 FT. Approx. Weight: 8,400 Lbs. 3,810 Kg.
1 2 3
Dimensionally Interchangeable with the 752 (no variances in blower mounts, no welded feet, etc.)
Competitively Priced
Superior Quality Copper Bar Squirrel Cage Rotor with 4532 Alloy High-Strength Forged Shaft for Radial Load
Performance / Specifications
3000 Torque 14.8* 103 ft-LB 15.00 Intermittent 60 sec. on, 30 sec. off (Short Time Duty) 1800HP Continuos Area 900 Lo 1800min-1 (Continuous Duty) 15
10 Current 2100 A Torque (ft-lb*10 ) 5 Voltage 600 0 0 500 1000 1500 Speed (RPM) 2000 2500 3000
3
1000
ENGINEERING DATA
Motor Performance Curve see above Ventilation 60m3/min. 2200Pa at 800 min-1 Insulation Class H Maximum Service Speed: 3000 min-1 Over speed: 3600 min-1 Dielectric Test: 4025 V Noise (@ No-Load): Approx. 91 dB(A) at 1m from motor frame Bearing Type: Gear Side: Roller Bearing; Opp. Gear side: Roller Bearing (6) Winding RTDs 240 V, 1 heaters Rating: Output (HP) Output (KW) Voltage (V) Current (A) Speed (min-1) Frequency (HZ) Efficiency (%) Power Factor (%) Slip (%) Continuous 1800 1342 600 1600 900 45.6 95.0 85 1.3 Intermittent 2250 1678 600 2100 800 40.7 95.0 82 1.7
HTM1800
Drive End
Dimensions
APPROX. 38
17.7
19
1.75