Professional Documents
Culture Documents
Page: 1/8 BASF Pakistan (Private) Limited Safety data sheet Date / Revised: 27.05.2010 Product: Fixapret Resin F-ECO (Fixapret* F-ECO) Version: 2.0 (30183688/SDS_TEX_PK/EN) Date of print 15.10.2011
Company: BASF Pakistan (Private) Limited 46-A, Block 6, P.E.C.H.S, Karachi-75400 PAKISTAN Contact address: Telephone: +92 21 111-550550 Telefax number: +92 21 4547-815 / 4546-552 E-mail address: basfpak@cyber.net.pk Emergency information: International emergency number: Telephone: +49 180 2273-112
2. Composition/information on ingredients
Chemical nature Preparation based on: 2-Imidazolidinone, 4,5-dihydroxy-1,3-bis(hydroxymethyl)-, reaction products with diethylene glycol (Content (W/W): >= 20 % - <= 60 %) in water/solvent Hazardous ingredients Diethylene glycol Content (W/W): > 15 % - < 25 % EC-Number: 203-872-2 INDEX-Number: 603-140-00-6 Hazard symbol(s): Xn
Page: 2/8 BASF Pakistan (Private) Limited Safety data sheet Date / Revised: 27.05.2010 Product: Fixapret Resin F-ECO (Fixapret* F-ECO) Version: 2.0
(30183688/SDS_TEX_PK/EN) Date of print 15.10.2011 R-phrase(s): 22 formaldehyde Content (W/W): > 0.1 % - <= 0.5 % EC-Number: 200-001-8 INDEX-Number: 605-001-00-5 Hazard symbol(s): T R-phrase(s): 23/24/25, 34, 43, 40 The wording of the hazard symbols and R-phrases is specified in chapter 16 if dangerous ingredients are mentioned.
3. Hazard identification
May cause sensitization by skin contact.
4. First-Aid Measures
General advice: Immediately remove contaminated clothing. If inhaled: If difficulties occur after vapour/aerosol has been inhaled, remove to fresh air and seek medical attention. On skin contact: Wash thoroughly with soap and water. On contact with eyes: Wash affected eyes for at least 15 minutes under running water with eyelids held open. On ingestion: Rinse mouth immediately and then drink plenty of water, seek medical attention. Note to physician: Treatment: Treat according to symptoms (decontamination, vital functions), no known specific antidote.
5. Fire-Fighting Measures
Suitable extinguishing media: water spray, dry powder, foam Specific hazards: harmful vapours
Page: 3/8 BASF Pakistan (Private) Limited Safety data sheet Date / Revised: 27.05.2010 Product: Fixapret Resin F-ECO (Fixapret* F-ECO) Version: 2.0
(30183688/SDS_TEX_PK/EN) Date of print 15.10.2011 Evolution of fumes/fog. The substances/groups of substances mentioned can be released in case of fire. Further information: Contaminated extinguishing water must be disposed of in accordance with official regulations.
Page: 4/8 BASF Pakistan (Private) Limited Safety data sheet Date / Revised: 27.05.2010 Product: Fixapret Resin F-ECO (Fixapret* F-ECO) Version: 2.0
(30183688/SDS_TEX_PK/EN) Date of print 15.10.2011 Personal protective equipment Respiratory protection: Respiratory protection in case of vapour/aerosol release. Particle filter with medium efficiency for solid and liquid particles (e.g. EN 143 or 149, Type P2 or FFP2) Hand protection: Chemical resistant protective gloves Suitable materials short-term contact and/or splashes (recommended: At least protective index 2, corresponding > 30 minutes of permeation time according to EN 374) butyl rubber (butyl) - 0.7 mm coating thickness nitrile rubber (NBR) - 0.4 mm coating thickness Supplementary note: The specifications are based on tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g. temperature) it must be considered, that the practical usage of a chemical-protective glove in practice may be much shorter than the permeation time determined through testing. Manufacturer's directions for use should be observed because of great diversity of types. Eye protection: Safety glasses with side-shields. Body protection: Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust). General safety and hygiene measures: Handle in accordance with good industrial hygiene and safety practice. Wearing of closed work clothing is required additionally to the stated personal protection equipment.
solidification temperature: approx. -10 C boiling temperature: > 100 C (1,013 hPa) Flash point: Density: > 100 C 1.2 g/cm3 (20 C) 1.191 g/cm3 (55 C) fully soluble (DIN 51758)
Solubility in water:
Page: 5/8 BASF Pakistan (Private) Limited Safety data sheet Date / Revised: 27.05.2010 Product: Fixapret Resin F-ECO (Fixapret* F-ECO) Version: 2.0
Irritation
Primary skin irritation rabbit: non-irritant (OECD Guideline 404) Primary irritations of the mucous membrane rabbit: non-irritant (OECD Guideline 405)
Carcinogenicity
Information on: formaldehyde Assessment of carcinogenicity: Indication of possible carcinogenic effect in animal tests. After lifelong inhalation exposure to concentrations that were severely damaging to the nasal epithelium, nasal tumors were induced in rats; in other species these findings were not found or were considerably less pronounced. The International Agency for Research on Cancer (IARC) has classified formaldehyde as a Group 1 (known) human carcinogen based on epidemiological evidence linking formaldehyde exposure to occurrence of nasopharyngeal cancer and leukemia. Current regulatory information is provided in this MSDS. No adverse health effects are anticipated if recommended personal protective equipment and industrial hygiene practices are used. ----------------------------------
Experiences in humans
May lead to a skin reaction in people already sensitised with formaldehyde. The product contains: formaldehyde May produce an allergic reaction.
Page: 6/8 BASF Pakistan (Private) Limited Safety data sheet Date / Revised: 27.05.2010 Product: Fixapret Resin F-ECO (Fixapret* F-ECO) Version: 2.0
sum parameter
Chemical oxygen demand (COD): 682 mg/g Biochemical oxygen demand (BOD): 22 mg/g
Additional information
Other ecotoxicological advice: Do not release untreated into natural waters. The product has not been tested. The statement has been derived from the properties of the individual components.
Page: 7/8 BASF Pakistan (Private) Limited Safety data sheet Date / Revised: 27.05.2010 Product: Fixapret Resin F-ECO (Fixapret* F-ECO) Version: 2.0
(30183688/SDS_TEX_PK/EN) Date of print 15.10.2011 Not classified as a dangerous good under transport regulations
Sea transport IMDG Not classified as a dangerous good under transport regulations
Air transport IATA/ICAO Not classified as a dangerous good under transport regulations
Irritant.
Page: 8/8 BASF Pakistan (Private) Limited Safety data sheet Date / Revised: 27.05.2010 Product: Fixapret Resin F-ECO (Fixapret* F-ECO) Version: 2.0
(30183688/SDS_TEX_PK/EN) Date of print 15.10.2011 The data contained in this safety data sheet are based on our current knowledge and experience and describe the product only with regard to safety requirements. The data do not describe the product's properties (product specification). Neither should any agreed property nor the suitability of the product for any specific purpose be deduced from the data contained in the safety data sheet. It is the responsibility of the recipient of the product to ensure any proprietary rights and existing laws and legislation are observed.