Professional Documents
Culture Documents
The MCX connectors are push and lock series which are ideal for space-saving inter connections. These connectors are very reliable for usage upto 2 GHz applications. Sricom MCX connectors are intermatable with any standard connectors manufactured to MIL-C-39012 specifications.
TECHNICAL SPECIFICATIONS
ELECTRICAL Impedance Voltage proof 50 Ohms / 75 At sea level 500 V rms - RG 178 750 V rms - RG 316 Insulation Resistance at 500 V DC 1000 Meg Ohms (Min)
MATERIAL Body & Body components Outer contact Inner Contact Sockets Ferrule Dielectric MECHANICAL Mating Cable affixment Engagement Force Disengagement Force Pushon Solder / Crimp 63 N max. 8 N Min., 20 N Max. Extruded Brass Berylium Copper - heat treated Beryllium Copper - heat treated Annealed Copper PTFE
5 Milli ohms (Max) 2.5 Milli ohms (Max) At Sea level 335 V rms - RG 316 170 V rms - RG 178
VSWR
108
I n t e r f a c e D i m e n s i o n s MCX Series
PLUG JACK
MCX
PLUG MIN 3.62 2.00 0.50 2.80 4.15 0.20 2.80 2.49 0.48 MAX 3.65 3.70 nom 2.07 0.95 nom 0.75 3.20 0.30 0.25 3.20 2.59 0.53 MIN 3.60 3.42 1.80 0.75 2.60 4.00 0.55 3.70 2.30 2.80
JACK MAX 3.80 3.48 1.98 0.95 nom 0.85 2.80 0.20 4.12 0.58 3.85 2.80
109
MCX
Impedance Ohms 50 50
Straight Plug
Impedance Ohms 50
Right Angle Plug Crimp Type Order Code SC9-A-01 SC9-A-02 Impedance Ohms 50 50 Applicable Cable (RG/U) 178, 196 174, 188, 316
Right Angle Plug Order Code SC9-A-06 110 Impedance Ohms 50 Applicable Cable (RG/U) 405
Impedance Ohms 50 50
Panel Jack Bulk Head Mount Crimp Type Order Code SC9-BR-01 SC9-BR-02 Impedance Ohms 50 50 Applicable Cable (RG/U) 178, 196 174, 188, 316
Panel Jack Bulk Head Mount Order Code SC9-BR-06 Impedance Ohms 50 Applicable Cable (RG/U) 405 111
MCX
Impedance Ohms 50
Right Angle Receptacle Bulk Head Mount Order Code 112 SC9-FAB-01 Impedance Ohms 50
Impedance Ohms 50
Impedance Ohms 50
Impedance Ohms 50
113
Right Angle Plug MCX Order Code SC9A02-75 Impedance Ohms 75 Applicable Cable 179 B/U
Straight Plug PCB Mount Order Code SC9-PM-17 Impedance Ohms 50 Applicable Cable (RG/U) MH - 02
Impedance Ohms 75
Straight Plug PCB Mount Order Code SC9-PM27-75 Impedance Ohms 75 Applicable Cable (RG/U) MH - 02
MCX
H 06
1. 2. 3. 4. 5. Slide the crimp ferrule over the cable. Trim the cable as per the dimensions shown above. Insert trimmed cable into connector assembly and slide the crimp ferrule over the braid and crimp. Align the center conductor of the cable into the slot of the centre contact and solder. Fit the cap insulator and press the cap insert.
115
MCX
H 01
1. 2. 3. 4. 5. Slide the heat shrinkable tube and the ferrule over cable. Strip the cable as per dimensions shown in figure. Fit the centre contact over the centre conductor of cable and solder them. Insert the sub-assembly into body and slide the ferrule until it butts against the body and crimp the ferrule. Shrink the heat shrinkable tube over the ferrule.
Note : A plug body is shown, but these instructions are relevant to both plugs and jacks.
H 02
1. 2. 116 3. Strip the cable as per dimension shown in figure. Insert the centre conductor of the cable into the centre contact and solder. Insert the sub-assembly into the connector body and solder the outer contact of the cable to the connector body.
MCX
H 03
1. 2. 3. 4. 5. 6. Slide the heat shrinkable tube and the Ferrule over cable. Strip the cable as per dimensions shown in figure. Insert the cable into the body. Solder the centre conductor of the cable and centre contact. Slide the ferrule until it butts against the body and crimp the Ferrule. Shrink the Heat shrinkable tube over the Ferrule. Fit the cap.
H 04
1. 2. 3. Strip the cable as per dimension shown in figure. Insert the centre conductor of the cable into the centre contact and solder them. Insert the sub-assembly into the connector body and solder the outer conductor of the cable to the connector body.
H 05
1. 2. 3. 4. Strip the cable as per dimension shown in figure. Insert the cable into the connector body. Solder the centre conductor of the cable and centre contact. solder the outer conductor of the cable to the connector body. Fit the cap. 117