You are on page 1of 184

TEKNO

ALUMINUM VS. STEEL



There is no welding required! Our hard anodized extruded aluminum does not rust or corrode, so no painting is necessary, EVER! Extruded aluminum beam profiles are designed to be lightweight while maintaining exceptional high strength characteristics. Modu-Tek aluminum beam profiles are T-slotted for ease and speed of assembly. Only three simple hand tools (1/2 wrench, 5/32 Allen Wrench, and a Standard Tape Measure) are required to build structural systems. Structures built from Modu-tek aluminum beam can be quickly reconfigured to incorporate design changes. Extruded aluminum beams are are easily expanded or altered to meet the requirements of any on-going project. Additional components and accessories are simple to add at any time.

WHY TEKNO?

Tekno has the most competitive pricing in the industry. When the overall cost of completing a project from start to finish are evaluated, Tekno is the true leader in the price war. Teknos components do not require drilling, tapping, or counterboring; saving time, expense, and labor. Tekno offers a wide variety of hardware to meet every design requirement. Teknos extruded aluminum profiles are T-6 grade...the strongest in the industry! Because our Modu-Tek components were designed with the assembly process in mind, absolutely no other product is faster or easier to assemble.

...but we dont want you to simply take our word for it...

We want you to let us prove it.

TYPICAL ASSEMBLIES

TEKNO

Standard fastening method when joining a 1x1 Slot Support Beam perpindicular (90 deg.) to another.

High load capacity fastening method when joining a 1x1 Slot Support Beam perpindicular (90 deg.) to another. This method should be used when the structure is to be exposed to considerable vibration.

Standard fastening method when joining a 1x1 Slot Support Beam at a 45 deg. angle

High load capacity fastening method when joining a 1x1 Slot Support Beam at a 45 deg. angle. This method should be used when the structure is to be exposed to considerable vibration.

TEKNO

TYPICAL ASSEMBLIES

Standard fastening method when mounting a 1x1, 1x2, or 1x3 Slot Support Beam perpindicularly (90 deg.) to a 1x1 Slot Support Beam in cross beam applications.

High load capacity fastening method when mounting a 1x1, 1x2, or 1x3 Slot Support Beam perpindicularly (90 deg.) to a 1x1 Slot Support Beam in cross beam applications. This method should be used when the structure is to be exposed to considerable vibration.

Standard fastning method when joining 1x1, 1x2, and 1x3 Slot Support Beams to one another at a perpindicular (90 deg.) angle.

High load capacity fastening method when mounting 1x1, 1x2, and 1x3 Slot Support Beams to one another at a perpindicular (90 deg.) angle. This method should be used when the structure is to be exposed to considerable vibration.

TYPICAL ASSEMBLIES

TEKNO

Standard fastening method when joining 1x1, 1x2, and 1x3 Slot Support Beams to one another at a 45 degree angle.

High load capacity fastening method when mounting 1x1, 1x2, and 1x3 Slot Support Beams to one another at a 45 degree angle. This method should be used when the structure is to be exposed to considerable vibration.

Fastening method for building a clean, stable framework corner from two Support Beams mated end-to-end at a 30 degree mitered joint. The ends of the beams should be cut at 15 degrees to form the 30 degree mating angle.

Fastening method for building a clean, stable framework corner from two Support Beams mated end-to-end at a 90 degree mitered joint. The ends of the beams should be cut at 45 degrees to form the 90 degree mating

TEKNO

TYPICAL ASSEMBLIES

An alternative fastening method for building a clean, stable 45 degree framework corner from two Support Beams mated end-to-end or endto-side. Each end of the two beams can be cut at 22.5 degrees to form the 45 degree mating angle, or one beeam can be cut at 45 degrees and fastened along the side of the adjoining beam, allowing lateral positioning of the mitered beam anywhere along the lenght of the other beam.

An alternative fastening method for building a clean, stable 90 degree framework corner from two Support Beams mated end-to-end or endto-side. Each end of the two beams can be cut at 45 degrees to form the 90 degree mating angle, or one beam can be cut at 90 degrees and fastened along the side of the adjoining beam, allowing lateral positioning of the mitered beam anywhere along the length of the other beam.

Assembly of 1x1 slot Fixed Foot to 1x1 Slot Support Beam leg.

1x1 Teardrop Leveling Foot Assemnly specifically designed for mating with 1x1 Slot Support Beam legs.

TYPICAL ASSEMBLIES

TEKNO

All Metal Leveling Foot Assembly with 1/2-13 Stem specifically designed for mating with 1x1 Slot Support Beam legs.

Leveling Foot Assembly with 1/2-13 Stem designed for light duty support applications such as benches and tables.

1x1 Slot Rigid Caster Assembly mounts to the end of a 1x1 Slot Support Beam to provide fixed caster moblility.

1x1 Slot Swivel Caster Assembly with Brake mounts to the end of a 1x1 Slot Support Beam tp provide brakeable swivel caster mobility.

1x1 Slot End Caps are used to cover exposed ends of 1x1 Slot Support Beams and to present a clean, finished look to complete structures.

TEKNO

TYPICAL ASSEMBLIES

T-slot Covers are used to cover open T-slots. T-slot covers can be used to hold individual cables and air lines in position within the T-slot cavity, thus preventing damage and/or injury by reducing exposure of the lines and cables.

The Panel Clamp T-Slot insert is used in guards and enclosures to secure polycarbonate panels in place within extrusion T-slots.

Top and Bottom 2-Panel Door Slides used in conjunction hold and guide two sliding panels between two parallel beams.

Fastening method for attaching Expanded Mesh and/ or Black Plastic Coated Wire Mesh Paneling to Support Beam extrusions in guards and enclosures.

TYPICAL ASSEMBLIES

TEKNO

Fastening method for attaching solid Plastic/ Polycarbonate Paneling to Support Beam extrusions in guards and enclosures.

Handle Assembly used on sliding panels, doors, and access hatches.

Handle Assembly used when mounting handle to extrusion T-Slots.

Hinge Assembly for doors and swing-out or pivoting structures.

TEKNO

TYPICAL ASSEMBLIES

Hinge Assembly for doors, panels, and swingout or pivoting structures that provides either free or dampened door swing motion through adjustment.

Lift-off Hinge Assembly for doors and swing-out or pivoting structures that allows quick and easy door removal.

Handle Assembly used to latch and lock doors on cabinets and guarding enclosures.

Magnetic Catch Assembly latches panels in place. Ten punds of force is required to break contact between the magnet and striker plate.

TEKNO
Table Of Contents
1. 2. 3. 4. 5. 6. 7. 8. 9. T-Slotted Extrusions Brackets Adapter/Joining Plates Strap Nuts & Joiner Strips Support Feet & Casters Assembly Hardware Beams & Caps Electrical Components Accessories

10. Additional Products & Services

TEKNO

1-1 T - SLOTTED EXTRUSIONS


Support Beams

Tri-Slot Support Beam (1.31 in x 1.00 in) E0100101 Page 1-5

1 x 1 Slot Support Beam (1.63 in x 1.63 in) E0100201 Page 1-6

1 x 2 Slot Support Beam (1.63in x 2.50 in) E0100301 Page 1-7

1 x 3 Slot Support Beam (1.63 in x 3.38 in) E0100401 Page 1-8

2 x 2 Slot Support Beam E0100501 (2.50 in x 2.50 in) Page 1-9

2 x 3 Slot Support Beam (2.50 in x 3.38 in) E0100601 Page 1-10

3 x 3 Slot Support Beam (3.38 in x 3.38 in) E0100701 Page 1-11

1 x 1 Cross Beam (1.75 in X 1.00 in) E0100801 Page 1-12

Lift Extrusion

Guide Rail

Lift Extrusion E1200121 Page 1-13

Snap-on Guide Rail E0800121 Page 1-14

1-2
T - SLOTTED EXTRUSIONS

TEKNO
INTRODUCTION
The information on this page pertains to all T-Slotted Extrusions.

Material Specifications: Material: 6063-T6 Aluminum Alloy Surface Finish: 201 R1 Clear Anodize, 150 RMS with an application depth of 0.001 in - 0.002 in [0.025 mm - 0.051 mm] Yield Strength: 25,000 lbs/in2 [1,758 kg/cm2] Tensile Strength: 30,000 lbs/in2 [2,109 kg/cm2] Elongation: Maximum of 12% in 2.0 in [50.8 mm] of length Modulus of Elasticity: 10 million lbs/in2 [703,100 kg/cm2] Brinell Hardness (500 Kg. Load, 10mm Ball): Approximately 73 HB Straightness: 0.0125 in/ft [0.1042 cm/m2], not to exceed 0.25 in [0.64 cm] over a 20 ft [6 m] length. Twist: 1/4 per foot, not to exceed 3 over a 20-foot length.

TEKNO
T-Slotted Extrusion Load Data:
Typical Load Conditions (see illustrations at right): CASE 1: The extrusion is fixed at one end, with a downward load on the other end. CASE 2: The extrusion is supported at both ends, with a downward load on the center.
CASE 1:

1-3
T - SLOTTED EXTRUSIONS

CASE 3: The extrusion is fixed at both ends, with a downward load on the center. Notes on Load Conditions: CASE 1 cantilever simulates a 5.0 ft [1.5 m] beam span, while CASES 2 & 3 simulate a 10.0 ft [3.0 m] beam span. Gravity was applied, but the results do not account for the deflection caused by the weight of each beam. The force (W) is applied at the end of the 5.0 ft [1.5 m] beam section in CASE 1. The force (W) is applied at the center of the beam for CASES 2 & 3. Maximum stress for each case and each crosssection are shown in the Von Mises Stress Data table at the right. Maximum deflections are shown on the table on the next page. A diagram detailing Load 1 and Load 2 applied to E0400201 s also on the next page.
CASE 3: L

Y W CASE 2: L

W Y

W Y

Stress Data
Par t N o . C ase 1 50 E0100201 E0100301 E0100401 E0100501 E0100601 E0100701 E0100801 E0200101 E0200201 E0200301 E0400101 E0400201 Load 1 E0400201 Load 2 8696 4076 2435 4115 1848 1519 13636 1024 2540 1237 467 850 1060 2 50 43478 20380 12175 20576 9242 7595 68182 5121 12701 6186 2334 4249 5398 50 0 86957 40761 24351 41152 18484 15190 136364 10242 25402 12371 4668 8499 10597 C ase 2 50 4348 2038 1218 2058 924 759 6818 512 1270 619 233 425 530 2 50 21739 10190 6088 10288 4621 3797 34091 2561 6351 3093 1167 2125 2649 50 0 43478 20380 12175 20576 9242 7595 68182 5121 12701 6186 2334 4249 5298 C ase 3 50 2174 1019 609 1029 462 380 3409 256 635 309 117 212 265 2 50 10870 5095 3044 5144 2311 1899 17045 1280 3175 1546 583 1062 1325 2125 2649 50 0 21739 10190 6088 10288 4621 3797 34091 2561 6351 3093 1167 Lb s. F o r ce Stress(psi) Stress(psi) Stress(psi) Stress(psi) Stress(psi) Stress(psi) Stress(psi) Stress(psi) Stress(psi) Stress(psi) Stress(psi) Stress(psi) Stress(psi)

1-4
T - SLOTTED EXTRUSIONS Notes:

TEKNO

TEKNO
E0100101
Tri-Slot Support Beam 1.31 in x 1.00 in [33.27 mm x 25.40 mm]
Typical Uses: Structural framework. Cross supports. Door and safety screen frames. Features: T-slots for modular assembly with Tbolts, Joiner Strips, and Square Nuts. Material: 6063-T6 Aluminum Alloy Surface Finish: 201 R1 Clear Anodize, 150 RMS with an application depth of 0.001 in - 0.002 in [0.025 mm - 0.051 mm] Yield Strength: 25,000 lbs/in2 [1,758 kg/cm2] Tensile Strength: 30,000 lbs/in2 [2,109 kg/cm2] Cross Sectional Area (A): 0.422 in2 [2.723 cm2] Moments of Inertia: Ix: 0.043 in4 [1.790 cm4] Iy: 0.077 in4 [3.205 cm4]
1.00 [25.40mm]

1-5
T-SLOTTED EXTRUSIONS

1.31 [33.27mm] 0.81 [20.62mm]

Sectional Moduli: Wx: 0.084 in3 [1.377 cm3] Wy: 0.113 in3 [1.852 cm3] Weight Per Foot: 0.47 lb [0.21 kg] Maximum Length Available: 20.0 ft [6.1 m]

1-6
T-SLOTTED EXTRUSIONS

TEKNO
E0100201
1 x 1 Slot Support Beam 1.63 in x 1.63 in [41.40 mm x 41.40 mm]
Typical Uses: Structural framework. Cross supports. Door and safety screen frames. Features: T-slots for modular assembly with T-bolts, Joiner Strips, and Square Nuts. Corner holes run throughout the length of the extrusion for the attachment of End Caps, End Plate Brackets, Leveling Feet, and Casters. Material: 6063-T6 Aluminum Alloy Surface Finish: 201 R1 Clear Anodize, 150 RMS with an application depth of 0.001 in - 0.002 in [0.025 mm 0.051 mm] Yield Strength: 25,000 lbs/in2 [1,758 kg/cm2] Tensile Strength: 30,000 lbs/in2 [2,109 kg/cm2] Cross Sectional Area (A): 1.018 in2 [6.568 cm2] Moments of Inertia: Ix: 0.280 in4 [11.655 cm4] Iy: Symmetric Sectional Moduli: Wx: 0.345 in3 [5.654 cm3] Wy: Symmetric

0.81 [20.65mm]

1.63 [41.28mm]

1.13 [28.58mm]

0.25 [6.35mm] 0.23 [5.72mm] TYP. 4 PLCS.

Weight Per Foot: 1.20 lb [0.54 kg] Maximum Length Available: 20.0 ft [6.1 m]

TEKNO
E0100301
1 x 2 Slot Support Beam 1.63 in x 2.50 in [41.40 mm x 63.50mm]
Typical Uses: Structural framework. Cross supports. Door and safety screen frames. Features: T-slots for modular assembly with T-bolts, Joiner Strips, and Square Nuts. Corner holes run throughout the length of the extrusion for the attachment of End Caps and End Plate Brackets. Material: 6063-T6 Aluminum Alloy Surface Finish: 201 R1 Clear Anodize, 150 RMS with an application depth of 0.001 in - 0.002 in [0.025 mm 0.051 mm] Yield Strength: 25,000 lbs/in2 [1,758 kg/cm2] Tensile Strength: 30,000 lbs/in2 [2,109 kg/cm2]

1-7
T-SLOTTED EXTRUSIONS

Cross Sectional Area (A): 1.358 in2 [8.761 cm2] Moments of Inertia: Ix: 0.919 in4 [38.252 cm4] Iy: 0.377 in4 [15.692 cm4] Sectional Moduli: Wx: 0.736 in3 [12.060 cm3] Wy: 0.464 in3 [7.604 cm3] Weight Per Foot: 1.60 lb [0.73 kg] Maximum Length Available: 20.0 ft [6.1 m]
0.25 [6.35mm]

1.63 [41.28mm] 1.13 [28.65mm]

0.23 [5.72mm] TYP. 4 PLCS.

0.88 2.50 2.00 [63.50mm] [50.80mm][22.23mm]

0.81 [20.65mm]

1-8
T-SLOTTED EXTRUSIONS

TEKNO
E0100401
1 x 3 Slot Support Beam 1.63 in x 3.38 in [41.40 mm x 85.85 mm]
Typical Uses: Structural framework. Cross supports. Features: T-slots for modular assembly with T-bolts, Joiner Strips, and Square Nuts. Corner holes run throughout the length of the extrusion for the attachment of End Caps and End Plate Brackets. Material: 6063-T6 Aluminum Alloy Surface Finish: 201 R1 Clear Anodize, 150 RMS with an application depth of 0.001 in - 0.002 in [0.025 mm 0.051 mm] Yield Strength: 25,000 lbs/in2 [1,758 kg/cm2] Tensile Strength: 30,000 lbs/in2 [2,109 kg/cm2]
X

Y 1.63 [41.28mm] 1.13 [28.58mm] 0.25 [6.35mm] 0.23 [5.72mm]

Cross Sectional Area (A): 1.697 in2 [10.950 cm2] Moments of Inertia: Ix: 2.079 in4 [86.535 cm4] Iy: 0.474 in4 [19.729 cm4] Sectional Moduli: Wx: 1.232 in3 [20.190 cm3] Wy: 0.583 in3 [9.554 cm3] Weight Per Foot: 2.00 lb [0.91 kg]

3.38 2.88 [85.73mm] [73.03mm] 0.88 [22.23mm]

0.81 [20.65mm]

Maximum Length Available: 20.0 ft [6.1 m]

TEKNO
E0100501
2 x 2 Slot Support Beam 2.50 in x 2.50 in [63.50 mm x 63.50 mm]
Typical Uses: Structural framework. Cross supports. Support legs. Features: T-slots for modular assembly with T-bolts, Joiner Strips, and Square Nuts. Corner holes run throughout the length of the extrusion for the attachment of End Caps, End Plate Brackets, Leveling Feet, and Casters. Material: 6063-T6 Aluminum Alloy Surface Finish: 201 R1 Clear Anodize, 150 RMS with an application depth of 0.001 in - 0.002 in [0.025 mm 0.051 mm] Yield Strength: 25,000 lbs/in2 [1,758 kg/cm2] Tensile Strength: 30,000 lbs/in2 [2,109 kg/cm2] Cross Sectional Area (A): 1.697 in2 [10.950 cm2] Moments of Inertia: Ix: 1.232 in4 [51.280 cm4] Iy: Symmetric Sectional Moduli: Wx: 0.729 in3 [11.950 cm3] Wy: Symmetric Weight Per Foot: 2.00 lb [0.91 kg] Maximum Length Available: 20.0 ft [6.1 m]

1-9
T-SLOTTED EXTRUSIONS

0.81 [20.65mm] 0.25 [6.35mm]

2.50 2.00 0.88 [63.50mm] [50.80mm] [22.23mm]

0.23 [5.72mm]

1-10
T-SLOTTED EXTRUSIONS

TEKNO
E0100601
2 x 3 Slot Support Beam 2.50 in x 3.38 in [63.50 mm x 85.85 mm]
Typical Uses: Structural framework. Cross supports. Features: T-slots for modular assembly with T-bolts, Joiner Strips, and Square Nuts. Corner holes run throughout the length of the extrusion for the attachment of End Caps and End Plate Brackets. Material: 6063-T6 Aluminum Alloy Surface Finish: 201 R1 Clear Anodize, 150 RMS with an application depth of 0.001 in - 0.002 in [0.025 mm 0.051 mm] Yield Strength: 25,000 lbs/in2 [1,758 kg/cm2]
Y X X

2.50 [63.50mm] 2.00 [50.80mm] 0.25 [6.35mm] Y

Tensile Strength: 30,000 lbs/in2 [2,109 kg/cm2] Cross Sectional Area (A): 2.037 in2 [13.140 cm2] Moments of Inertia: Ix: 2.737 in4 [113.923 cm4] Iy: 1.541 in4 [64.142 cm4]

0.81 [20.62mm]

3.38 2.88 [86.73mm] [73.03mm] 0.88 [22.23mm]

Sectional Moduli: Wx: 1.623 in3 [26.600 cm3] Wy: 1.236 in3 [20.250 cm3] Weight Per Foot: 2.40 lb [1.09 kg] Maximum Length Available: 20.0 ft [6.1 m]

0.23 [5.72mm]

TEKNO
E0100701
3 x 3 Slot Support Beam 3.38 in x 3.38 in [85.85 mm x 85.85 mm]
Typical Uses: Structural framework. Cross supports. Support legs. Features: T-slots for modular assembly with T-bolts, Joiner Strips, and Square Nuts. Corner holes run throughout the length of the extrusion for the attachment of End Caps, End Plate Brackets, Leveling Feet, and Casters. Material: 6063-T6 Aluminum Alloy Surface Finish: 201 R1 Clear Anodize, 150 RMS with an application depth of 0.001 in - 0.002 in [0.025 mm 0.051 mm] Yield Strength: 25,000 lbs/in2 [1,758 kg/cm2] Tensile Strength: 30,000 lbs/in2 [2,109 kg/cm2] Cross Sectional Area (A): 2.379 in2 [15.350 cm2] Moments of Inertia: Ix: 3.395 in4 [141.311 cm4] Iy: Symmetric Sectional Moduli: Wx: 1.975 in3 [32.360 cm3] Wy: Symmetric Weight Per Foot: 2.80 lb [1.27 kg] Maximum Length Available: 20.0 ft [6.1 m]
0.25 [6.35mm]

1-11
T-SLOTTED EXTRUSIONS

3.38 [85.73mm] 2.88 [73.03mm]

0.23 [5.72mm]

0.88 [22.23mm]

0.81 [20.62mm]

1-12
T-SLOTTED EXTRUSIONS

TEKNO
E0100801
1 x 1 Slot Cross Beam 1.75 in x 1.00 in [44.45 mm x 25.40 mm]
Typical Uses: Structural framework. Cross supports. Door and safety screen frames. Features: T-slots for modular assembly with T-bolts, Joiner Strips, and Square Nuts. Material: 6063-T6 Aluminum Alloy Surface Finish: 201 R1 Clear Anodize, 150 RMS with an application depth of 0.001 in - 0.002 in [0.025 mm 0.051 mm] Yield Strength: 25,000 lbs/in2 [1,758 kg/cm2] Tensile Strength: 30,000 lbs/in2 [2,109 kg/cm2] Cross Sectional Area (A): 0.743 in2 [4.794 cm2]
Y X X

0.88 [22.23mm] 1.75 [44.45mm]

Moments of Inertia: Ix: 0.193 in4 [8.033 cm4] Iy: 0.074 in4 [3.080 cm4] Sectional Moduli: Wx: 0.220 in3 [3.605 cm3] Wy: 0.148 in3 [2.425 cm3] Weight Per Foot: 0.87 lb [0.39 kg]

0.50 [12.70mm] 1.00 [25.40mm]

Maximum Length Available: 20.0 ft [6.1 m]

TEKNO
E1200121
Lift Extrusion

1-13
T-SLOTTED EXTRUSIONS

Typical Use: Lift mechanisms within structural framework applications. Features: T-slots for modular assembly with T-bolts, Joiner Strips, and Square Nuts. * Two embedded larger slots for #60 chain and wearstrip the length of the beam. Material: 6063-T6 Aluminum Alloy Surface Finish: 201 R1 Clear Anodize, 150 RMS with an application depth of 0.001in - 0.002 in [0.025 mm - 0.051 mm]

Yield Strength: 25,000 lbs/in2 [1,758 kg/cm2]

Tensile Strength: 30,000 lbs/in2 [2,109 kg/cm2 Cross Sectional Area (A): 8.688 in2 Moments of Inertia: Sectional Moduli: Weight Per Foot: 10.17 lb [4.64 kg] Maximum Length Available:

1-14
T-SLOTTED EXTRUSIONS

TEKNO
E0800121
Snap-On Guide Rail
Typical Use: Guiding pallets along lenghts of conveyor. Features: Mounts easily to allTekno Guide Rail Brackets Material: 6063-T6 Aluminim Alloy Surface Finish: 201 R1 Clear Anodize, 150 RMS with an application depth of 0.001 in - 0.002 in [0.025 mm - 0.051 mm]

Yield Strength:

Tensile Strength:

Cross Sectional Area (A):

Moments of Inertia: Sectional Moduli: Weight Per Foot: Maximum Length Available: 20 ft (240in)

TEKNO
Notes:

1-15
T-SLOTTED EXTRUSIONS

TEKNO
90 Web Brackets

2-1
BRACKETS

1 x 2 Slot Full Web Bracket B0100121 Page 2-2

1 x 2 Slot Half Web Bracket - Right B0100221 Page 2-3

1 x 2 Slot Half Web Bracket - Left B0100321 Page 2-4

2 x 1 Slot Full Web Bracket B0100421 Page 2-5

2 x 2 Slot Full Web Bracket B0100521 Page 2-6

3 x 1 Slot Full Web Bracket B0100621 Page 2-7

3 x 2 Slot Full Web Bracket B0100721 Page 2-8

3 x 3 Slot Full Web Bracket B0100821 Page 2-9

45 Web Brackets

1 x 1 Slot 45 Web Bracket B0100921 Page 2-10

2 x 2 Slot 45 Web Bracket B0101021 Page 2-11

3 x 3 Slot 45 Web Bracket B0101121 Page 2-12

Guide Rail Bracket

Angle Bracket

Guide Rail Bracket B0700721 Page 2-13

1 x 1 Slot Angle Bracket B0200121 Page 2-14

TEKNO
B0100121
1 x 2 Slot Full Web Bracket
Typical Use: To join two coplanar lengths of 1-slot Support Beam perpendicular (90) to one another. Features: Raised bosses and slotted holes for easy alignment during installation. Material: Pressure Die-cast Aluminum Weight: 0.25 lb [0.11 kg] Hardware Recommended for Assembly: 5/16 - 18 x 3/4 T-Bolts (H0100121), 4 each. 5/16 Flat Washers (68N34WSDZ/089), 4 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 4 each. OR 5/16 - 18 x 5/8 Hex Head Cap Screws (31C62HCS5Z), 4 each. 5/16 Flat Washers (68N34WSDZ/089), 4 each. Double Square Nuts (H0100721), 4 each. Assembly Note: When using Hex Head Cap Screws and Double Square Nuts with this bracket in applications where the hardware may vibrate, apply Locktite #262 to the outside thread of the Cap Screws before insertion to prevent loosening.
0.88 [22.23mm] 0.38 [9.52mm] 0.43 [10.97mm] SQUARE

2-2
BRACKETS

0.34 [8.64mm]

0.19 [4.78mm] 0.06 [1.52mm] 0.25 [6.35mm] 2.31 [58.75mm]

1.38 [34.93mm] 0.69 [17.48mm] 0.81 [20.65mm]

2-3
BRACKETS

TEKNO
B0100221
1 x 2 Slot Half Web Bracket - Right
Typical Use: To join two lengths of 1-slot Support Beams, not on the same plane, perpendicular (90) to one another. Features: Raised bosses and slotted holes for easy alignment during installation. The web of the bracket is on its right side as shown in the illustration at right. Material: Pressure Die-cast Aluminum Weight: 0.14 lb [0.06 kg] Hardware Recommended for Assembly: 5/16 - 18 x 3/4 T-Bolts (H0100121), 3 each. 5/16 Flat Washers (68N34WSDZ/089), 3 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 3 each. OR

0.38 [9.52mm]

0.43 [10.97mm] SQUARE 1.38 [34.98mm] 0.69 [17.48mm] 0.81 [20.62mm] 2.31 [58.75mm] 0.88 [22.23mm]

0.19 [4.78mm] 0.06 [1.60mm] 0.25 [6.35mm]

5/16 - 18 x 5/8 Hex Head Cap Screws (31C62HCS5Z), 3 each. 5/16 Flat Washers (68N34WSDZ/089), 3 each. Double Square Nuts (H0100721), 3 each. Assembly Note: When using Hex Head Cap Screws and Double Square Nuts with this bracket in applications where the hardware may vibrate, apply Locktite #262 to the outside thread of the Cap Screws before insertion to prevent loosening.

1.47 [37.39mm]

0.34 [8.64mm]

TEKNO
B0100321
1 x 2 Slot Half Web Bracket - Left
Typical Use: To join two lengths of 1-slot Support Beams, not on the same plane, perpendicular (90) to one another. Features: Raised bosses and slotted holes for easy alignment during installation. The web of the bracket is on its left side as shown in the illustration at left. Material: Pressure Die-cast Aluminum Weight: 0.14 lb [0.06 kg] Hardware Recommended for Assembly: 5/16 - 18 x 3/4 T-Bolts (H0100121), 3 each. 5/16 Flat Washers (68N34WSDZ/089), 3 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 3 each. OR 5/16 - 18 x 5/8 Hex Head Cap Screws (31C62HCS5Z), 3 each. 5/16 Flat Washers (68N34WSDZ/089), 3 each. Double Square Nuts (H0100721), 3 each. Assembly Note: When using Hex Head Cap Screws and Double Square Nuts with this bracket in applications where the hardware may vibrate, apply Locktite #262 to the outside thread of the Cap Screws before insertion to prevent loosening.

2-4
BRACKETS

0.34 [8.64mm]

0.88 [22.23mm]

0.43 [10.97mm] SQUARE 1.38 [34.93mm] 0.06 [1.60mm] 0.69 [17.48mm] 0.81 [20.62mm] 0.38 [9.52mm]

0.19 [4.78mm]

0.25 [6.35mm]

1.47 [37.34mm] 2.31 [58.67mm]

2-5
BRACKETS

TEKNO
B0100421
2 x 1 Slot Full Web Bracket
Typical Use: To join two lengths of 2-slot Support Beam, not on the same plane, perpendicular (90) to one another. Features: Raised bosses and slotted holes for easy alignment during installation. Material: Pressure Die-cast Aluminum Weight: 0.24 lb [0.11 kg] Hardware Recommended for Assembly: 5/16 - 18 x 3/4 T-Bolts (H0100121), 6 each. 5/16 Flat Washers (68N34WSDZ/089), 6 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 6 each. OR 5/16 - 18 x 5/8 Hex Head Cap Screws (31C62HCS5Z), 6 each. 5/16 Flat Washers (68N34WSDZ/089), 6 each. Double Square Nuts (H0100721), 6 each. Assembly Note: When using Hex Head Cap Screws and Double Square Nuts with this bracket in applications where the hardware may vibrate, apply Locktite #262 to the outside thread of the Cap Screws before insertion to prevent loosening.
0.38 [9.52mm]

0.43 [10.97mm] SQUARE 0.19 [4.78mm] 2.25 [57.15mm]

0.69 0.06 [17.48mm] [1.60mm] 0.81 [20.62mm] 2.31 [58.75mm] 0.34 [8.64mm]

0.25 [6.35mm]

1.47 [37.39mm]

TEKNO
B0100521
2 x 2 Slot Full Web Bracket
Typical Use: To join two coplanar lengths of 2-slot Support Beam perpendicular (90) to one another. Features: Raised bosses and slotted holes for easy alignment during installation. Material: Pressure Die-cast Aluminum Weight: 0.44 lb [0.20 kg] Hardware Recommended for Assembly: 5/16 - 18 x 3/4 T-Bolts (H0100121), 8 each. 5/16 Flat Washers (68N34WSDZ/089), 8 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 8 each. OR 5/16 - 18 x 5/8 Hex Head Cap Screws (31C62HCS5Z), 8 each. 5/16 Flat Washers (68N34WSDZ/089), 8 each. Double Square Nuts (H0100721), 8 each. Assembly Note: When using Hex Head Cap Screws and Double Square Nuts with this bracket in applications where the hardware may vibrate, apply Locktite #262 to the outside thread of the Cap Screws before insertion to prevent loosening.
0.34 [8.64mm] 0.88 [22.35mm]

2-6
BRACKETS

0.43 [10.97mm] SQUARE

0.19 [4.78mm] 0.69 0.06 [17.48mm] [1.60mm] 0.25 [6.35mm] 2.31 [58.72mm] 0.81 [20.62mm] 2.25 [57.15mm]

0.38 [9.52mm]

2-7
BRACKETS

TEKNO
B0100621
3 x 1 Slot Full Web Bracket
Typical Use: To join a length of 1-slot Support Beam perpendicular (90), but not coplanar, to a length of 3-slot Support Beam. Features: Raised bosses and slotted holes for easy alignment during installation. Material: Pressure Die-cast Aluminum Weight: 0.42 lb [0.19 kg] Hardware Recommended for Assembly: 5/16 - 18 x 3/4 T-Bolts (H0100121), 6 each. 5/16 Flat Washers (68N34WSDZ/089), 6 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 6 each. OR 5/16 - 18 x 5/8 Hex Head Cap Screws (31C62HCS5Z), 6 each. 5/16 Flat Washers (68N34WSDZ/089), 6 each. Double Square Nuts (H0100721), 6 each. Assembly Note: When using Hex Head Cap Screws and Double Square Nuts with this bracket in applications where the hardware may vibrate, apply Locktite #262 to the outside thread of the Cap Screws before insertion to prevent loosening.

0.43 [10.97mm]

3.13 [79.38mm] 0.19 [4.78mm] 0.06 [1.60mm] 0.25 [6.35mm] 0.69 [17.48mm] 2.44 [61.93mm]

0.81 [20.62mm]

0.38 [9.52mm]

3.19 [80.98mm]

1.47 [37.39mm] 0.34 [8.64mm]

TEKNO
B0100721
3 x 2 Slot Full Web Bracket
Typical Use: To join a length of 2-slot Support Beam perpendicular (90), but not coplanar, to a length of 3-slot Support Beam. Features: Raised bosses and slotted holes for easy alignment during installation. Material: Pressure Die-cast Aluminum Weight: 0.53 lb [0.24 kg] Hardware Recommended for Assembly: 5/16 - 18 x 3/4 T-Bolts (H0100121), 8 each. 5/16 Flat Washers (68N34WSDZ/089), 8 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 8 each. OR 5/16 - 18 x 5/8 Hex Head Cap Screws (31C62HCS5Z), 8 each. 5/16 Flat Washers (68N34WSDZ/089), 8 each. Double Square Nuts (H0100721), 8 each. Assembly Note: When using Hex Head Cap Screws and Double Square Nuts with this bracket in applications where the hardware may vibrate, apply Locktite #262 to the outside thread of the Cap Screws before insertion to prevent loosening.
0.34 [8.64mm] 0.88 [22.23mm]

2-8
BRACKETS

0.34 [8.64mm] SQUARE 0.19 [4.78mm] 3.13 [79.38mm] 0.06 [1.60mm] 0.25 [6.35mm] 0.69 [17.48mm]

1.19 [30.18mm] 3.19 [80.98mm]

0.38 [9.52mm]

2.35 [59.59mm]

2-9
BRACKETS

TEKNO
B0100821
3 x 3 Slot Full Web Bracket
Typical Use: To join two coplanar lengths of 3-slot Support Beam perpendicular (90) to one another. Features: Raised bosses and slotted holes for easy alignment during installation. Material: Pressure Die-cast Aluminum Weight: 0.69 lb [0.31 kg] Hardware Recommended for Assembly: 5/16 - 18 x 3/4 T-Bolts (H0100121), 8 each. 5/16 Flat Washers (68N34WSDZ/089), 8 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 8 each. OR
0.38 [9.52mm] 0.06 [1.60mm]

1.75 [44.45mm]

0.43 [10.97mm] SQUARE

5/16 - 18 x 5/8 Hex Head Cap Screws (31C62HCS5Z), 8 each. 5/16 Flat Washers (68N34WSDZ/089), 8 each. Double Square Nuts (H0100721), 8 each.
3.13 [79.38mm]

0.34 [8.64mm]

1.75 [44.45mm]

0.69 [17.48mm]

0.81 [20.62mm]

3.19 [80.98mm]

Assembly Note: When using Hex Head Cap Screws and Double Square Nuts with this bracket in applications where the hardware may vibrate, apply Locktite #262 to the outside thread of the Cap Screws before insertion to prevent loosening.

.
0.25 [6.35mm] 0.19 [4.78mm]

TEKNO
B0100921
1 x 1 Slot 45 Web Bracket
Typical Uses: To join the end of a 1-slot Support Beam to the side of another 1-slot Support Beam at a 45 angle. Provides support structure sway bracing. Features: Provides easy alignment for 45 angle gussets. Surface A depicted in the 2-D illustration attaches firmly to the end of a 1 x 1 Slot Support Beam with 1/4 - 20 Socket Head Cap Screws. Surface B attaches firmly to the side of the other 1 x 1 Slot Support Beam with fasteners listed below. Material: Pressure Die-cast Aluminum Weight: 0.38 lb [0.17 kg] Hardware Recommended for Assembly: For attachment to the end of the one support beam: 1/4 - 20 x 1 Socket Head Cap Screws (25C100KCSS), 4 each. For attachment to the side of the other support beam: 5/16 - 18 x 7/8 T-bolts (H0100221), 2 each. 5/16 Flat Washers (68N34WSDZ/089), 2 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 2 each. OR 5/16 - 18 x 3/4 Hex Head Cap Screws (31C75HCS5Z), 2 each. 5/16 Flat Washers (68N34WSDZ/089), 2 each. Double Square Nuts (H0100721), 2 each. Assembly Note: When using Hex Head Cap Screws and Double Square Nuts with this bracket in applications where the hardware may vibrate, apply Locktite #262 to the outside thread of the Cap Screws before insertion to prevent loosening.
0.25 [6.35mm] 0.25 [6.35mm]

2-10
BRACKETS

1.13 [28.58mm] SURFACE A

1.95 0.31 [49.48mm] [7.92mm] SURFACE B 4.50 [114.30mm] 3.50 [88.90mm] 0.50 [12.70mm]

.
0.63 [15.88mm]

1.63 0.75 [19.05mm][41.28mm]

0.22 [5.56mm] 0.34 [8.64mm]

2-11
BRACKETS

TEKNO
B0101021
2 x 2 Slot 45 Web Bracket
Typical Uses: To join the end of a 2-slot Support Beam to the side of another 2-slot Support Beam at a 45 angle. Provides support structure sway bracing. Features: Provides easy alignment for 45 angle gussets. Surface A depicted in the 2-D illustration attaches firmly to the end of a 2 x 2 Slot Support Beam with 1/4 - 20 Socket Head Cap Screws. Surface B attaches firmly to the side of the other 2 x 2 Slot Support Beam with fasteners listed below. Material: Pressure Die-cast Aluminum Weight: 0.50 lb [0.23 kg] Hardware Recommended for Assembly: For attachment to the end of the 2 x 2 Slot Support Beam: 1/4 - 20 x 1 Socket Head Cap Screws (25C100KCSS), 4 each.
0.25 [6.35mm] 2.00 [50.80mm] 0.25 [6.35mm] 2.57 [65.18mm] 0.31 [7.95mm] SURFACE B 5.38 [136.53mm] 4.38 [111.13mm] 0.50 [12.70mm]

SURFACE A

For attachment to the side of the other support beam: 5/16 - 18 x 7/8 T-bolts (H0100221), 4 each. 5/16 Flat Washers (68N34WSDZ/089), 4 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 4 each. OR 5/16 - 18 x 3/4 Hex Head Cap Screws (31C75HCS5Z), 4 each. 5/16 Flat Washers (68N34WSDZ/089), 4 each. Double Square Nuts (H0100721), 4 each. Assembly Note: When using Hex Head Cap Screws and Double Square Nuts with this bracket in applications where the hardware may vibrate, apply Locktite #262 to the outside thread of the Cap Screws before insertion to prevent loosening.

0.88 [22.23mm]

2.13 2.50 [53.98mm] [63.50mm]

0.34 [8.64mm]

0.27 [5.58mm]

0.62 [15.72mm]

TEKNO
B0101121
3 x 3 Slot 45 Web Bracket
Typical Uses: To join the end of a 3-slot Support Beam to the side of another 3-slot Support Beam at a 45 angle. Provides support structure sway bracing. Features: Provides easy alignment for 45 angle gussets. Surface A depicted in the 2-D illustration attaches firmly to the end of a 3 x 3 Slot Support Beam with 1/4 - 20 Socket Head Cap Screws. Surface B attaches firmly to the side of the other 3 x 3 Slot Support Beam with fasteners listed below. Material: Pressure Die-cast Aluminum Weight: 0.63 lb [0.28 kg] Hardware Recommended for Assembly: For attachment to the end of the 3 x 3 Slot Support Beam: 1/4 - 20 x 1 Socket Head Cap Screws (25C100KCSS), 4 each. For attachment to the side of the other support beam: 5/16 - 18 x 7/8 T-bolts (H0100221), 6 each. 5/16 Flat Washers (68N34WSDZ/089), 6 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 6 each. OR 5/16 - 18 x 3/4 Hex Head Cap Screws (31C75HCS5Z), 6 each. 5/16 Flat Washers (68N34WSDZ/089), 6 each. Double Square Nuts (H0100721), 6 each. Assembly Note: When using Hex Head Cap Screws and Double Square Nuts with this bracket in applications where the hardware may vibrate, apply Locktite #262 to the outside thread of the Cap Screws before insertion to prevent loosening.
SURFACE B 6.00 [152.40mm] 5.00 [127.00mm]

2-12
BRACKETS

0.25 [6.35mm]

2.88 [73.03mm]

0.25 [6.35mm]

3.19 [80.90mm] SURFACE A 0.31 [7.92mm]

0.50 [12.70mm]

0.63 [15.88mm] 3.00 3.38 [76.20mm] [85.73mm]

0.88 [22.23mm]

0.34 [8.64mm]

0.27 [5.58mm]

2-13
BRACKETS

TEKNO
B0700721
Guide Rail Bracket
Typical Uses: Mounting bracket for Tekno style guide rail Material: 6061-T6 Aluminum Surface Finish: Polished Weight: 0.08 lb [0.03 kg] Hardware Recommended for Assembly: For a Support Beam Joint: 3/4 T-Bolt (H0100121), (1ea.) 5/16-18 NY-LOC Flange nut (31CNNEFW) Guide Rail Wedge ( H0900121), (1ea)

TEKNO
B0200121
1 x 1 Slot Angle Bracket
Typical Uses: To attach a 1-slot support beam to a machine base. Material: 6061-T6 Aluminum Alloy Angle Surface Finish: Clear Anodize Weight: 0.10 lb [0.05 kg] Hardware Recommended for Assembly: For a Support Beam Joint: 5/16 - 18 x 5/8 Button Head Cap Screws (31C62KBCS), 2 each. 5/16 Double Square Nuts (H0100721), 2 each. OR For Attachment to a Machine Base: 5/16 - 18 x 5/8 Button Head Cap Screws (31C62KBCS), 2 each. 5/16 Double Square Nut (H0100721), 1 each. Assembly Note: When using Cap Screws and Double Square Nuts with this bracket in applications where the hardware may vibrate; apply Locktite #262 to the outside thread of the Cap Screws before insertion to prevent loosening.

2-14
BRACKETS

0.25 [6.35mm]

0.34 [8.74mm]

1.50 [38.10mm]

0.25 [6.35mm]

0.81 [20.62mm] 1.50 [38.10mm]

0.81 [20.62mm] 0.75 [19.05mm]

1.50 [38.10mm]

TEKNO
Stair Tread and Walkovers
Teknos Modu-Tek line also allows you to design and build completely modular stair treads and walkovers for your application. Built of the highest quality extruded anodized aluminum, these structures provide lightweight, yet ultra sturdy platforms and staircases. Our tread plate material is designed with a premium on safety; all of our tread plates feature raised rows of teeth for extra traction. We also offer vented tread plate that allows dirt and other accumulates to fall freely through the plate, virtually eliminating the risk of slippage. As is the case with any Modu-Tek product, these structures posess incredible versatility and are easily configured/reconfigured for any application; no drilling or tapping required! Call us today for further information on our Modu-Tek Walkovers and Stair Treads!

This Page Intentionally Left Blank

TEKNO
Notes:

3-1
ADAPTER/JOINING PLATES
Adapter Plates

TEKNO

1 x 1 Slot End Adapter Plate B0300121 Page 3-3

1 x 2 Slot End Adapter Plate B0300221 Page 3-4

1 x 3 Slot End Adapter Plate B0300321 Page 3-5

2 x 1 Slot End Adapter Plate B0300421 Page 3-6

2 x 2 Slot End Adapter Plate B0300521 Page 3-7

2 x 3 Slot Ended Adapter Plate B0300621 Page 3-8

3 x 1 Slot End Adapter Plate B0300721 Page 3-9

3 x 2 Slot End Adapter Plate B0300821 Page 3-10

3 x 3 Slot End Adapter Plate B0300921 Page 3-11

90 Corner Joining Plates

Heavy Duty Joining Plates

1-Slot 90 Corner Joining Plate B0500121 Page 3-12

2-Slot 90 Corner Joining Plate B0500221 Page 3-13

3-Slot 90 Corner Joining Plate B0500321 Page 3-14

1-Slot Heavy Duty Corner Joining Plate B0500421 Page 3-15

TEKNO

3-2
ADAPTER/JOINING PLATES
45 Corner Joining Plates

1-Slot 45 Right Hand Corner Joining Plate B0500521 Page 3-16

1-Slot Left Hand Corner Joining Plate B0500621 Page 3-17

2-Slot 45 Right Hand Corner Joining Plate B0500721 Page 3-18

2-Slot 45 Left Hand Corner Joining Plate B0500821 Page 3-18

3-Slot 45 Right Corner Joining Plate B0500921 Page 3-19

3-Slot 45 Left Corner Joining Plate B0501021 Page 3-20

1 x 1 Joining Plate B0501121 Page 3-21

1 x 1 (4-Hole Tee) Joining Plate B0501221 Page 3-22

1 x 1 (6-Hole Tee) Joining Plate B0501321 Page 3-23

3-3
ADAPTER/JOINING PLATES

TEKNO
B0300121
1 x 1 Slot End Adapter Plate
Typical Use: To mount 1 x 1, 1 x 2, or 1 x 3 Slot Support Beams perpendicularly to 1 x 1 Slot Support Beams in cross beam applications. Features: Provides alignment for two perpendicular support beams. 1/4 - 20 x 1 1/4 Flat Head Cap Screws secure the end of a 1 x 1 Slot Support Beam to the bracket on surface A. T-bolts or Hex Head Cap Screws secure surface B of the bracket to the side of the mating 1 x 1, 1 x 2, or 1 x 3 Slot Support Beam. Material: Clear Anodized Aluminum Weight: 0.19 lb [0.09 kg] Hardware Recommended for Assembly: For attachment to the end of the 1 x 1 Slot Support Beam: 1/4 - 20 x 1 1/4 Flat Head Thread Cutting Cap Screws (25C125TTF), 4 each. For attachment to the side of the other mating support beam: 5/16 - 18 x 7/8 T-bolts (H0100221), 2 each. 5/16 Flat Washers (68N34WSDZ/089), 2 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 2 each. OR

4.25 [107.95mm] 3.25 [82.55mm] 1.13 [28.58mm] 0.81 [20.65mm] 1.63 [41.28mm] 1.56 [39.67mm] DRILLED & COUNTERSUNK FOR 1/4 -20 FHCS 0.34 [8.64mm]

0.25 [6.35mm] 1.13 [28.58mm] 0.50 [12.70mm] SURFACE A

SURFACE B 0.31 [7.95mm]

5/16 - 18 x 3/4 Hex Head Cap Screws (31C75HCS5Z), 2 each. 5/16 Flat Washers (68N34WSDZ/089), 2 each. Double Square Nuts (H0100721), 2 each. Assembly Note: When using Hex Head Cap Screws and Double Square Nuts with this bracket in applications where the hardware may vibrate, apply Locktite #262 to the outside thread of the Cap Screws before insertion to prevent loosening.

TEKNO
B0300221
1 x 2 Slot End Adapter Plate
Typical Use: To mount 1 x 1, 1 x 2, or 1 x 3 Slot Support Beams perpendicularly to 1 x 2 Slot Support Beams in cross beam applications. Features: Provides alignment for two perpendicular support beams. 1/4 - 20 x 1 1/4 Flat Head Cap Screws secure the end of a 1 x 2 Slot Support Beam to the bracket on surface A. T-bolts or Hex Head Cap Screws secure surface B of the bracket to the side of the mating 1 x 1, 1 x 2, or 1 x 3 Slot Support Beam. Material: Clear Anodized Aluminum Weight: 0.24 lb [0.11 kg] Hardware Recommended for Assembly: For attachment to the end of the 1 x 2 Slot Support Beam: 1/4 - 20 x 1 1/4 Flat Head Thread Cutting Cap Screws (25C125TTF), 4 each. For attachment to the side of the other mating support beam: 5/16 - 18 x 7/8 T-bolts (H0100221), 2 each. 5/16 Flat Washers (68N34WSDZ/089), 2 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 2 each. OR 5/16 - 18 x 3/4 Hex Head Cap Screws (31C75HCS5Z), 2 each. 5/16 Flat Washers (68N34WSDZ/089), 2 each. Double Square Nuts (H0100721), 2 each. Assembly Note: When using Hex Head Cap Screws and Double Square Nuts with this bracket in applications where the hardware may vibrate, apply Locktite #262 to the outside thread of the Cap Screws before insertion to prevent loosening.

3-4
ADAPTER/JOINING PLATES

3-5
ADAPTER/JOINING PLATES

TEKNO
B0300321
1 x 3 Slot End Adapter Plate
Typical Use: To mount 1 x 1, 1 x 2, or 1 x 3 Slot Support Beams perpendicularly to 1 x 3 Slot Support Beams in cross beam applications. Features: Provides alignment for two perpendicular support beams. 1/4 - 20 x 1 1/4 Flat Head Cap Screws secure the end of a 1 x 3 Slot Support Beam to the bracket on surface A. T-bolts or Hex Head Cap Screws secure surface B of the bracket to the side of the mating 1 x 1, 1 x 2, or 1 x 3 Slot Support Beam. Material: Clear Anodized Aluminum Weight: 0.29 lb [0.13 kg] Hardware Recommended for Assembly: For attachment to the end of the 1 x 3 Slot Support Beam: 1/4 - 20 x 1 1/4 Flat Head Thread Cutting Cap Screws (25C125TTF), 4 each. For attachment to the side of the other mating support beam: 5/16 - 18 x 7/8 T-bolts (H0100221), 2 each. 5/16 Flat Washers (68N34WSDZ/089), 2 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 2 each. OR 5/16 - 18 x 3/4 Hex Head Cap Screws (31C75HCS5Z), 2 each. 5/16 Flat Washers (68N34WSDZ/089), 2 each. Double Square Nuts (H0100721), 2 each. Assembly Note: When using Hex Head Cap Screws and Double Square Nuts with this bracket in applications where the hardware may vibrate, apply Locktite #262 to the outside thread of the Cap Screws before insertion to prevent loosening.

SURFACE A

0.31 [7.95mm]

SURFACE B 0.25 [6.35mm] 1.13 [28.58mm]

0.50 [12.70mm]

0.34 [8.64mm] DRILLED & COUNTERSUNK FOR 1/4-20 FHCS 2.88 [73.03mm] 5.00 [127.00mm] 6.00 [152.40mm]

1.56 [39.67mm]

0.81 [20.65mm] 1.63 [41.28mm]

TEKNO
B0300421
2 x 1 Slot End Adapter Plate
Typical Use: To mount 1 x 2, 2 x 2, or 2 x 3 Slot Support Beams perpendicularly to 1 x 2 Slot Support Beams in cross beam applications. Features: Provides alignment for two perpendicular support beams. 1/4 - 20 x 1 1/4 Flat Head Cap Screws secure the end of a 1 x 2 Slot Support Beam to the bracket on surface A. T-bolts or Hex Head Cap Screws secure surface B of the bracket to the side of the mating 1 x 2, 2 x 2, or 2 x 3 Slot Support Beam. Material: Clear Anodized Aluminum Weight: 0.30 lb [0.14 kg] Hardware Recommended for Assembly: For attachment to the end of the 1 x 2 Slot Support Beam: 1/4 - 20 x 1 1/4 Flat Head Thread Cutting Cap Screws (25C125TTF), 4 each. For attachment to the side of the other mating support beam: 5/16 - 18 x 7/8 T-bolts (H0100221), 4 each. 5/16 Flat Washers (68N34WSDZ/089), 4 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 4 each. OR 5/16 - 18 x 3/4 Hex Head Cap Screws (31C75HCS5Z), 4 each. 5/16 Flat Washers (68N34WSDZ/089), 4 each. Double Square Nuts (H0100721), 4 each. Assembly Note: When using Hex Head Cap Screws and Double Square Nuts with this bracket in applications where the hardware may vibrate, apply Locktite #262 to the outside thread of the Cap Screws before insertion to prevent loosening.

3-6
ADAPTER/JOINING PLATES

3-7
ADAPTER/JOINING PLATES

TEKNO
B0300521
2 x 2 Slot End Adapter Plate
Typical Use: To mount 1 x 2, 2 x 2, or 2 x 3 Slot Support Beams perpendicularly to 2 x 2 Slot Support Beams in cross beam applications. Features: Provides alignment for two perpendicular support beams. 1/4 - 20 x 1 1/4 Flat Head Cap Screws secure the end of a 2 x 2 Slot Support Beam to the bracket on surface A. T-bolts or Hex Head Cap Screws secure surface B of the bracket to the side of the mating 1 x 2, 2 x 2, or 2 x 3 Slot Support Beam. Material: Clear Anodized Aluminum Weight: 0.38 lb [0.17 kg] Hardware Recommended for Assembly: For attachment to the end of the 2 x 2 Slot Support Beam: 1/4 - 20 x 1 1/4 Flat Head Thread Cutting Cap Screws (25C125TTF), 4 each. For attachment to the side of the other mating support beam: 5/16 - 18 x 7/8 T-bolts (H0100221), 4 each. 5/16 Flat Washers (68N34WSDZ/089), 4 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 4 each. OR 5/16 - 18 x 3/4 Hex Head Cap Screws (31C75HCS5Z), 4 each. 5/16 Flat Washers (68N34WSDZ/089), 4 each. Double Square Nuts (H0100721), 4 each. Assembly Note: When using Hex Head Cap Screws and Double Square Nuts with this bracket in applications where the hardware may vibrate, apply Locktite #262 to the outside thread of the Cap Screws before insertion to prevent loosening.

TEKNO
B0300621
2 x 3 Slot End Adapter Plate
Typical Use: To mount 1 x 2, 2 x 2, or 2 x 3 Slot Support Beams perpendicularly to 2 x 3 Slot Support Beams in cross beam applications. Features: Provides alignment for two perpendicular support beams. 1/4 - 20 x 1 1/4 Flat Head Cap Screws secure the end of a 2 x 3 Slot Support Beam to the bracket on surface A. T-bolts or Hex Head Cap Screws secure surface B of the bracket to the side of the mating 1 x 2, 2 x 2, or 2 x 3 Slot Support Beam. Material: Clear Anodized Aluminum Weight: 0.45 lb [0.20 kg] Hardware Recommended for Assembly: For attachment to the end of the 2 x 3 Slot Support Beam: 1/4 - 20 x 1 1/4 Flat Head Thread Cutting Cap Screws (25C125TTF), 4 each. For attachment to the side of the other mating support beam: 5/16 - 18 x 7/8 T-bolts (H0100221), 4 each. 5/16 Flat Washers (68N34WSDZ/089), 4 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 4 each. OR 5/16 - 18 x 3/4 Hex Head Cap Screws (31C75HCS5Z), 4 each. 5/16 Flat Washers (68N34WSDZ/089), 4 each. Double Square Nuts (H0100721), 4 each. Assembly Note: When using Hex Head Cap Screws and Double Square Nuts with this bracket in applications where the hardware may vibrate, apply Locktite #262 to the outside thread of the Cap Screws before insertion to prevent loosening.

3-8
ADAPTER/JOINING PLATES

2.50 [63.50mm]

SURFACE A 0.31 [7.95mm]

SURFACE B 0.81 [20.65mm] 0.34 [8.64mm] 0.88 [22.23mm]

0.50 [12.70mm]

DRILLED & COUNTERSUNK FOR 1/4-20 FHCS 2.88 [73.03mm]

6.00 [152.40mm]

5.00 [127.00mm]

1.56 [39.67mm]

2.00 [50.80mm]

3-9
ADAPTER/JOINING PLATES

TEKNO
B0300721
3 x 1 Slot End Adapter Plate
Typical Use: To mount 1 x 3, 2 x 3, or 3 x 3 Slot Support Beams perpendicularly to 1 x 3 Slot Support Beams in cross beam applications. Features: Provides alignment for two perpendicular support beams. 1/4 - 20 x 1 1/4 Flat Head Cap Screws secure the end of a 1 x 3 Slot Support Beam to the bracket on surface A. T-bolts or Hex Head Cap Screws secure surface B of the bracket to the side of the mating 1 x 3, 2 x 3, or 3 x 3 Slot Support Beam. Material: Clear Anodized Aluminum Weight: 0.41 lb [0.18 kg] Hardware Recommended for Assembly: For attachment to the end of the 2 x 3 Slot Support Beam: 1/4 - 20 x 1 1/4 Flat Head Thread Cutting Cap Screws (25C125TTF), 4 each. For attachment to the side of the other mating support beam: 5/16 - 18 x 7/8 T-bolts (H0100221), 6 each. 5/16 Flat Washers (68N34WSDZ/089), 6 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 6 each. OR

SURFACE A

0.31 [7.95mm]

SURFACE B 3.38 [85.73mm] 0.25 [6.35mm] 0.34 [8.64mm] 0.88 [22.23mm] 0.50 [12.70mm]

DRILLED & COUNTERSUNK FOR 1/4-20 FHCS 1.13 [28.58mm]

3.25 [82.55mm] 4.25 [107.95mm]

5/16 - 18 x 3/4 Hex Head Cap Screws (31C75HCS5Z), 6 each. 5/16 Flat Washers (68N34WSDZ/089), 6 each. Double Square Nuts (H0100721), 6 each. Assembly Note: When using Hex Head Cap Screws and Double Square Nuts with this bracket in applications where the hardware may vibrate, apply Locktite #262 to the outside thread of the Cap Screws before insertion to prevent loosening.

1.56 [39.67mm]

1.75 [44.45mm] 2.88 [73.03mm]

TEKNO
B0300821
3 x 2 Slot End Adapter Plate
Typical Use: To mount 1 x 3, 2 x 3, or 3 x 3 Slot Support Beams perpendicularly to 2 x 3 Slot Support Beams in cross beam applications. Features: Provides alignment for two perpendicular support beams. 1/4 - 20 x 1 1/4 Flat Head Cap Screws secure the end of a 2 x 3 Slot Support Beam to the bracket on surface A. T-bolts or Hex Head Cap Screws secure surface B of the bracket to the side of the mating 1 x 3, 2 x 3, or 3 x 3 Slot Support Beam. Material: Clear Anodized Aluminum Weight: 0.50 lb [0.23 kg] Hardware Recommended for Assembly: For attachment to the end of the 2 x 3 Slot Support Beam: 1/4 - 20 x 1 1/4 Flat Head Thread Cutting Cap Screws (25C125TTF), 4 each. For attachment to the side of the other mating support beam: 5/16 - 18 x 7/8 T-bolts (H0100221), 6 each. 5/16 Flat Washers (68N34WSDZ/089), 6 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 6 each. OR 5/16 - 18 x 3/4 Hex Head Cap Screws (31C75HCS5Z), 6 each. 5/16 Flat Washers (68N34WSDZ/089), 6 each. Double Square Nuts (H0100721), 6 each. Assembly Note: When using Hex Head Cap Screws and Double Square Nuts with this bracket in applications where the hardware may vibrate, apply Locktite #262 to the outside thread of the Cap Screws before insertion to prevent loosening.

3-10
ADAPTER/JOINING PLATES

3.38 [85.73mm] SURFACE A 0.31 [7.95mm]

SURFACE B 0.88 [22.23mm] 0.81 [20.62mm]

0.50 [12.70mm]

0.34 [8.64mm] DRILLED & COUNTERSUNK FOR 1/4-20 FHCS 2.00 [50.80mm] 4.13 [104.78mm] 5.13 [130.18mm]

1.56 [39.67mm]

0.25 [6.35mm]

2.88 [73.03mm]

3-11
ADAPTER/JOINING PLATES

TEKNO
B0300921
3 x 3 Slot End Adapter Plate
Typical Use: To mount 1 x 3, 2 x 3, or 3 x 3 Slot Support Beams perpendicularly to 3 x 3 Slot Support Beams in cross beam applications. Features: Provides alignment for two perpendicular support beams. 1/4 - 20 x 1 1/4 Flat Head Cap Screws secure the end of a 3 x 3 Slot Support Beam to the bracket on surface A. T-bolts or Hex Head Cap Screws secure surface B of the bracket to the side of the mating 1 x 3, 2 x 3, or 3 x 3 Slot Support Beam. Material: Clear Anodized Aluminum Weight: 0.60 lb [0.27 kg] Hardware Recommended for Assembly: For attachment to the end of the 3 x 3 Slot Support Beam: 1/4 - 20 x 1 1/4 Flat Head Thread Cutting Cap Screws (25C125TTF), 4 each. For attachment to the side of the other mating support beam: 5/16 - 18 x 7/8 T-bolts (H0100221), 6 each. 5/16 Flat Washers (68N34WSDZ/089), 6 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 6 each. OR

3.38 [85.73mm] SURFACE A 0.31 [7.95mm]

SURFACE B 0.81 [20.65mm] 0.25 [6.35mm] 0.50 [12.70mm] 0.34 [8.64mm] 0.88 [22.23mm]

DRILLED & COUNTERSUNK FOR 1/4-20 FHCS

5.00 [127.00mm] 2.88 [73.03mm]

6.00 [152.40mm]

5/16 - 18 x 3/4 Hex Head Cap Screws (31C75HCS5Z), 6 each. 5/16 Flat Washers (68N34WSDZ/089), 6 each. Double Square Nuts (H0100721), 6 each. Assembly Note: When using Hex Head Cap Screws and Double Square Nuts with this bracket in applications where the hardware may vibrate, apply Locktite #262 to the outside thread of the Cap Screws before insertion to prevent loosening.

1.56 [39.67mm]

2.88 [73.03mm]

TEKNO
B0500121
1-Slot 90 Corner Joining Plate
Typical Use: To connect 1 x 1, 1 x 2, and 1 x 3 Slot Support Beams to one another at a perpendicular (90) angle. Features: Recessed tabs allow for the accurate positioning into beam T-slots to ensure squareness of the joint. Material: Mild Steel, Zinc Plated Weight: 0.32 lb [0.14 kg] Hardware Recommended for Assembly: Standard Configuration: 5/16 - 18 x 3/4 T-bolts (H0100121), 5 each. 5/16 Flat Washers (68N34WSDZ/089), 5 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 5 each. Alternate configuration (used as a high loading capacity fastening method which allows for easy lateral movement of the bracket and fasteners along the length of one beams T-slot): 5/16 - 18 x 1/2 Hex Head Cap Screws (31C50HCS5Z), 5 each. 5/16 Lock Washers (31NLOCZ), 5 each. Double Square Nuts (H0100721), 5 each.

3-12 ADAPTER/JOINING PLATES

0.63 [15.88mm]

1.75 [44.45mm]

0.88 [22.23mm]

0.34 [8.64mm] 4.56 [115.90mm]

0.13 [3.18mm] 0.06 [1.60mm]

0.43 [10.97mm]

SECTION A-A
1.25 [31.75mm]

High Load Capacity Fastening Method

3-13
ADAPTER/JOINING PLATES

TEKNO
B0500221
2-Slot 90 Corner Joining PlateB0500221 2-Slot 90 Corner Joining Plate
Typical Use: To connect 1 x 2, 2 x 2, and 2 x 3 Slot Support Beams to one another at a perpendicular (90) angle. Features: Recessed tabs allow for the accurate positioning into beam T-slots to ensure squareness of the joint. Material: Mild Steel, Zinc Plated Weight: 0.60 lb [0.27 kg] Hardware Recommended for Assembly: Standard Configuration: 5/16 - 18 x 3/4 T-bolts (H0100121), 10 each. 5/16 Flat Washers (68N34WSDZ/089), 10 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 10 each. Alternate configuration (used as a high loading capacity fastening method which allows for easy lateral movement of the bracket and fasteners along the length of one beams T-slot): 5/16 - 18 x 1/2 Hex Head Cap Screws (31C50HCS5Z), 10 each. 5/16 Lock Washers (31NLOCZ), 10 each. Double Square Nuts (H0100721), 10 each.

TEKNO
B0500321
3-Slot 90 Corner Joining Plate
Typical Use: To connect 1 x 3, 2 x 3, and 3 x 3 Slot Support Beams to one another at a perpendicular (90) angle. Features: Recessed tabs allow for the accurate positioning into beam T-slots to ensure squareness of the joint. Material: Mild Steel, Zinc Plated Weight: 0.93 lb [0.42 kg] Hardware Recommended for Assembly: Standard Configuration: 5/16 - 18 x 3/4 T-bolts (H0100121), 17 each. 5/16 Flat Washers (68N34WSDZ/089), 17 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 17 each. Alternate configuration (used as a high loading capacity fastening method which allows for easy lateral movement of the bracket and fasteners along the length of one beams T-slot): 5/16 - 18 x 1/2 Hex Head Cap Screws (31C50HCS5Z), 17 each. 5/16 Lock Washers (31NLOCZ), 17 each. Double Square Nuts (H0100721), 17 each.

3-14
ADAPTER/JOINING PLATES

3-15
ADAPTER/JOINING PLATES

TEKNO
B0500421
1-Slot Heavy Duty Corner Joining Plate
Typical Use: To connect all T-slotted Support Beams to one another at a perpendicular (90) angle with 4 fasteners per beam positioned linearly. Features: Greater plate thickness for increased strength and rigidity. Recessed tabs allow for the accurate positioning into beam T-slots to ensure squareness of the joint. Material: Mild Steel, Zinc Plated Weight: 1.08 lbs [0.49 kg] Hardware Recommended for Assembly: Standard Configuration: 5/16 - 18 x 3/4 T-bolts (H0100121), 8 each. 5/16 Flat Washers (68N34WSDZ/089), 8 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 8 each. Alternate configuration: 4-Hole Joiner Strips (B0600311), 2 each. 5/16 - 18 x 5/8 Hex Head Cap Screws (31C62HCS5Z), 8 each. 5/16 Lock Washers (31NLOCZ), 8 each.

TEKNO
B0500521
1-Slot 45 Right Hand Corner Joining Plate
Typical Use: To connect 1 x 1, 1 x 2, and 1 x 3 Slot Support Beams to one another at a 45 angle. Features: Provides alignment of two support beams at a 45 angle. Recessed tabs allow for the accurate positioning into beam T-slots to ensure a correct joint angle. Material: Mild Steel, Zinc Plated Weight: 0.41 lb [0.18 kg] Hardware Recommended for Assembly: Standard Configuration: 5/16 - 18 x 3/4 T-bolts (H0100121), 5 each. 5/16 Flat Washers (68N34WSDZ/089), 5 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 5 each. Alternate configuration (used as a high loading capacity fastening method which allows for easy lateral movement of the bracket and fasteners along the length of one beams T-slot): 5/16 - 18 x 1/2 Hex Head Cap Screws (31C50HCS5Z), 5 each. 5/16 Lock Washers (31NLOCZ), 5 each. Double Square Nuts (H0100721), 5 each.

3-16
ADAPTER/JOINING PLATES

3-17
ADAPTER/JOINING PLATES

TEKNO
B0500621
1-Slot 45 Left Hand Corner Joining Plate
Typical Use: To connect 1 x 1, 1 x 2, and 1 x 3 Slot Support Beams to one another at a 45 angle. Features: Provides alignment of two support beams at a 45 angle. Recessed tabs allow for the accurate positioning into beam T-slots to ensure a correct joint angle. Material: Mild Steel, Zinc Plated Weight: 0.41 lb [0.18 kg] Hardware Recommended for Assembly: Standard Configuration: 5/16 - 18 x 3/4 T-bolts (H0100121), 5 each. 5/16 Flat Washers (68N34WSDZ/089), 5 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 5 each. Alternate configuration (used as a high loading capacity fastening method which allows for easy lateral movement of the bracket and fasteners along the length of one beams T-slot): 5/16 - 18 x 1/2 Hex Head Cap Screws (31C50HCS5Z), 5 each. 5/16 Lock Washers (31NLOCZ), 5 each. Double Square Nuts (H0100721), 5 each.

TEKNO
B0500721
2-Slot 45 Right Hand Corner Joining Plate &

3-18
ADAPTER/JOINING PLATES

B0500821
2-Slot 45 Left Hand Corner Joining Plate
Typical Use: To connect 1 x 2, 2 x 2, and 2 x 3 Slot Support Beams to one another at a 45 angle. Features: Provides alignment of two support beams at a 45 angle. Recessed tabs allow for the accurate positioning into beam T-slots to ensure a correct joint angle. Material: Mild Steel, Zinc Plated Weight: 0.69 lb [0.32 kg] Hardware Recommended for Assembly: Standard Configuration: 5/16 - 18 x 3/4 T-bolts (H0100121), 10 each. 5/16 Flat Washers (68N34WSDZ/089), 10 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 10 each. Alternate configuration (used as a high loading capacity fastening method which allows for easy lateral movement of the bracket and fasteners along the length of one beams T-slot): 5/16 - 18 x 1/2 Hex Head Cap Screws (31C50HCS5Z), 10 each. 5/16 Lock Washers (31NLOCZ), 10 each. Double Square Nuts (H0100721), 10 each.
B0500821

B0500721

3-19
ADAPTER/JOINING PLATES

TEKNO
B0500921
3-Slot 45 Right Hand Corner Joining Plate
Typical Use: To connect 1 x 3, 2 x 3, and 3 x 3 Slot Support Beams to one another at a 45 angle. Features: Provides alignment of two support beams at a 45 angle. Recessed tabs allow for the accurate positioning into beam T-slots to ensure a correct joint angle. Material: Mild Steel, Zinc Plated Weight: 0.95 lb [0.43 kg] Hardware Recommended for Assembly: 5/16 - 18 x 3/4 T-bolts (H0100121), 15 each. 5/16 Flat Washers (68N34WSDZ/089), 15 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 15 each. Alternate configuration (used as a high loading capacity fastening method which allows for easy lateral movement of the bracket and fasteners along the length of one beams T-slot): 5/16 - 18 x 1/2 Hex Head Cap Screws (31C50HCS5Z), 15 each. 5/16 Lock Washers (31NLOCZ), 15 each. Double Square Nuts (H0100721), 15 each.

TEKNO
B0501021
3-Slot 45 Left Hand Corner Joining Plate
Typical Use: To connect 1 x 3, 2 x 3, and 3 x 3 Slot Support Beams to one another at a 45 angle. Features: Provides alignment of two support beams at a 45 angle. Recessed tabs allow for the accurate positioning into beam T-slots to ensure a correct joint angle. Material: Mild Steel, Zinc Plated Weight: 0.95 lb [0.43 kg] Hardware Recommended for Assembly: Standard Configuration: 5/16 - 18 x 3/4 T-bolts (H0100121), 15 each. 5/16 Flat Washers (68N34WSDZ/089), 15 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 15 each. Alternate configuration (used as a high loading capacity fastening method which allows for easy lateral movement of the bracket and fasteners along the length of one beams T-slot): 5/16 - 18 x 1/2 Hex Head Cap Screws (31C50HCS5Z), 15 each. 5/16 Lock Washers (31NLOCZ), 15 each. Double Square Nuts (H0100721), 15 each.

3-20
ADAPTER/JOINING PLATES

3-21
ADAPTER/JOINING PLATES

TEKNO
B0501121
1 x 1 Joining Plate
Typical Use: To mount 1 x 1 support beams side by side for guarding applications. Features: T-bolts secure the plate to the support beams for ease of assembly. Material: Clear Anodized Aluminum Weight: 0.21 lb [0.10 kg] Hardware Recommended for Assembly: 5/16 - 18 x 3/4 T-bolts (H0100121), 4 each. 5/16 Flat Washers (68N34WSDZ/089), 4 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 4 each.

3.00 [76.20mm] 0.69 [17.45mm] 2.31 [58.72mm] 0.63 [15.88mm]

3.00 [76.20mm]

2.38 [60.33mm]

0.25 [6.35mm]

TEKNO
B0501221
1 x 1 (4-Hole) Tee Joining Plate
Typical Use: To mount 1 x 1 support beams in a Tee configuration for guarding applications. Features: T-bolts secure the plate to the support beams for ease of assembly. Material: Clear Anodized Aluminum Weight: 0.27 lb [0.12 kg] Hardware Recommended for Assembly: 5/16 - 18 x 3/4 T-bolts (H0100121), 4 each. 5/16 Flat Washers (68N34WSDZ/089), 4 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 4 each.

3-22
ADAPTER/JOINING PLATES

3-23
ADAPTER/JOINING PLATES

TEKNO
B0501321
1 x 1 (6-Hole) Tee Joining Plate
Typical Use: To mount 1 x 1 support beams side by side for guarding applications. Features: T-bolts secure the plate to the support beams for ease of assembly. Material: Clear Anodized Aluminum Weight: 0.39 lb [0.18 kg] Hardware Recommended for Assembly: 5/16 - 18 x 3/4 T-bolts (H0100121), 6 each. 5/16 Flat Washers (68N34WSDZ/089), 6 each. 5/16 - 18 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 6 each.

TEKNO
Notes:

4-1 Strap Nuts & Joiner Strips

TEKNO
Straight Joiner Strip

Strap Nuts

2 - Hole Strap Nut B0600121 Page 4-2

3 - Hole Strap Nut B0600221 Page 4-3

4 - Hole Joiner Strip B0600311 Page 4-4

Vertical Joiner Strips

30 Vertical Joiner Strip B0600421 Page 4-5

45 Vertical Joiner Strip B0600521 Page 4-6

60 Vertical Joiner Strip B0600621 Page 4-7

90 Vertical Joiner Strip B0600721 Page 4-8

Horizontal Joiner Strips

30 Horizontal Joiner Strip B0600821 Page 4-9

45 Horizontal Joiner Strip B0600921 Page 4-10

60 Horizontal Joiner Strip B0601021 Page 4-11

90 Horizontal Joiner Strip B0601121 Page 4-12

TEKNO
B0600121
2-Hole Strap Nut
Typical Use: A high-loading fastening method which allows for easy movement along the length of a T-slot. The strap nut can function in place of T-bolts or Double Strap Nuts on Web Brackets, Corner Tab Brackets, etc. when a higher loading capacity is required. Features: Includes two pre-tapped holes for Hex Head Cap Screws, Set Screws, or Machine Screws. Material: Mild Steel, Zinc Plated Weight: 0.13 lb [0.06 kg] Hardware Recommended for Assembly: For a Web Bracket: 5/16 - 18 x 5/8 Hex Head Cap Screws (31C62HCS5Z), 2 each. 5/16 Flat Washers (68N34WSDZ/089), 2 each. For a 45 Web or End Plate Bracket: 5/16 - 18 x 3/4 Hex Head Cap Screws (31C75HCS5Z), 2 each. 5/16 Flat Washers (68N34WSDZ/089), 2 each. For a Corner Tab Bracket: 5/16 - 18 x 1/2 Hex Head Cap Screws (31C50HCS5Z), 2 each. 5/16 Lock Washers (31NLOCZ), 2 each.

4-2 Strap Nuts & Joiner Strips

2.50 [63.50mm] 1.75 [44.45mm]

0.38 [9.52mm]

5/16-18 TAPPED (2 PLACES)

0.75 [19.05mm]

0.25 [6.35mm]

4-3 Strap Nuts & Joiner Strips

TEKNO
B0600221
3-Hole Strap Nut
Typical Use: A high-loading fastening method which allows for easy movement along the length of a T-slot. The strap nut can function in place of T-bolts or Double Strap Nuts on Web Brackets, Corner Tab Brackets, etc. when a higher loading capacity is required. When used in this manner, the third pre-tapped hole, secured by a Set Screw, can serve to further prevent slippage of the parts along the length of the T-slot. Features: Includes three pre-tapped holes for Hex Head Cap Screws, Set Screws, or Machine Screws. Material: Mild Steel, Zinc Plated Weight: 0.21 lb [0.10 kg] Hardware Recommended for Assembly: For a Web Bracket: 5/16 - 18 x 5/8 Hex Head Cap Screws (31C62HCS5Z), 2 each. 5/16 - 18 x 5/16 Stainless Steel Set Screw (31C31KKCS), 1 each. 5/16 Flat Washers (68N34WSDZ/089), 2 each.
0.75 [19.05mm]

4.25 [107.95mm] 1.75 [44.45mm] 0.38 [9.52mm] 0.38 [9.52mm]

5/16-18 TAPPED (3 PLACES)

0.25 [6.35mm]

For a 45 Web or End Plate Bracket: 5/16 - 18 x 3/4 Hex Head Cap Screws (31C75HCS5Z), 2 each. 5/16 - 18 x 5/16 Stainless Steel Set Screw (31C31KKCS), 1 each. 5/16 Flat Washers (68N34WSDZ/089), 2 each. For a Corner Tab Bracket: 5/16 - 18 x 1/2 Hex Head Cap Screws (31C50HCS5Z), 2 each. 5/16 Lock Washers (31NLOCZ), 2 each.

TEKNO
B0600311
4-Hole Strap Nut
Typical Uses: To mate and connect support beams in an end-to-end fashion when inserted into Tslots and fastened. Can be used as a strap nut, a high-loading fastening method which allows for easy movement along the length of a T-slot. The strap nut can function in place of T-bolts and Double Square Nuts on Web Brackets, Corner Tab Brackets, etc. when a higher loading capacity is required. When used in this manner, the third and fourth pre-tapped holes, secured by Set Screws, can serve to further prevent slippage of the parts along the length of the T-slot. Features: Four pre-tapped 5/16 holes accommodate Set Screws, Cap Screws, or Machine Screws for connecting beams and attachments. Material: Mild Steel, Zinc Plated Weight: 0.32 lb [0.14 kg] Hardware Included: 5/16 - 18 x 5/16 Stainless Steel Set Screw (31C31KKCS), 4 each. Hardware Recommended for Assembly: For use as a Joiner Strip to join two support beams end-to-end: None (all set screws included). For attaching to a 3-Slot 90 Corner Tab Bracket: 5/16 - 18 x 1/2 Hex Head Cap Screws (31C50HCS5Z), 4 each. 5/16 Lock Washers (31NLOCZ), 4 each.

4-4 Strap Nuts & Joiner Strips

6.00 [152.40mm] 0.38 [9.52mm] 1.75 [44.45mm] 0.75 [19.05mm] 5/16-18 TAPPED (4 PLACES) 0.38 [9.52mm] 0.25 [6.35mm]

4-5 Strap Nuts & Joiner Strips

TEKNO
B0600421
30 Vertical Joiner Strip
Typical Use: To build a stable and neat framework corner from two Support Beams mated and connected end-to-end at a 30 mitered joint. The fitting is placed in the T-slots and clamped against the slot with Set Screws. Features: Four pre-tapped 5/16 holes accommodate Set Screws, Cap Screws, or Machine Screws for connecting beams and attachments. Material: Mild Steel, Zinc Plated Weight: 0.20 lb [0.09 kg] Hardware Recommended for Assembly: 5/16 - 18 x 5/16 Stainless Steel Set Screws (31C31KKCS), 4 each. Assembly Note: The ends of the two Support Beams have to be cut at 15 to form the 30 mating angle.

4.34 [110.24mm] 5/16-18 TAPPED (4 PLACES) 0.75 [19.05mm] 0.38 [9.52mm] 0.38 [9.52mm] 0.25 [6.35mm] 0.88 [22.23mm]

2.13 [53.98mm] 30

1.81 [46.05mm]

TEKNO
B0600521
45 Vertical Joiner Strip
Typical Use: To build a stable and neat framework corner from two Support Beams mated and connected end-to-end at a 45 mitered joint. The fitting is placed in the T-slots and clamped against the slot with Set Screws. Features: Four pre-tapped 5/16 holes accommodate Set Screws, Cap Screws, or Machine Screws for connecting beams and attachments. Material: Mild Steel, Zinc Plated Weight: 0.21 lb [0.10 kg] Hardware Recommended for Assembly: 5/16 - 18 x 5/16 Stainless Steel Set Screws (31C31KKCS), 4 each. Assembly Note: The ends of the two Support Beams have to be cut at 22.5 to form the 45 mating angle.

4-6 Strap Nuts & Joiner Strips

4.16 [105.61mm]

5/16-18 TAPPED (4 PLACES)

0.38 [9.52mm] 0.75 [19.05mm] 0.38 [9.52mm]

2.13 [53.98mm] 2.25 [57.23mm] 45

0.88 [22.23mm]

0.25 [6.35mm]

4-7 Strap Nuts & Joiner Strips

TEKNO
B0600621
60 Vertical Joiner Strip
Typical Use: To build a stable and neat framework corner from two Support Beams mated and connected end-to-end at a 60 mitered joint. The fitting is placed in the T-slots and clamped against the slot with Set Screws. Features: Four pre-tapped 5/16 holes accommodate Set Screws, Cap Screws, or Machine Screws for connecting beams and attachments. Material: Mild Steel, Zinc Plated Weight: 0.21 lb [0.10 kg] Hardware Recommended for Assembly: 5/16 - 18 x 5/16 Stainless Steel Set Screws (31C31KKCS), 4 each. Assembly Note: The ends of the two Support Beams have to be cut at 30 to form the 60 mating angle.

3.84 [97.46mm]

5/16-18 TAPPED (4 PLACES)

0.38 [9.52mm] 0.75 [19.05mm] 0.38 [9.52mm]

2.13 [53.98mm]

2.59 [65.79mm] 60

0.88 [22.23mm]

0.25 [6.35mm]

TEKNO
B0600721
90 Vertical Joiner Strip
Typical Use: To build a stable and neat framework corner from two Support Beams mated and connected end-to-end at a 90 mitered joint. The fitting is placed in the T-slots and clamped against the slot with Set Screws. Features: Four pre-tapped 5/16 holes accommodate Set Screws, Cap Screws, or Machine Screws for connecting beams and attachments. Material: Mild Steel, Zinc Plated Weight: 0.32 lb [0.14 kg] Hardware Recommended for Assembly: 5/16 - 18 x 5/16 Stainless Steel Set Screws (31C31KKCS), 4 each. Assembly Note: The ends of the two Support Beams have to be cut at 45 to form the 90 mating angle.

4-8 Strap Nuts & Joiner Strips

0.38 [9.52mm]

0.75 [19.05mm]

2.88 [73.03mm]

0.38 [9.52mm]

0.88 [22.35mm]

0.25 [6.35mm]

4-9 Strap Nuts & Joiner Strips

TEKNO
B0600821
30 Horizontal Joiner Strip
Typical Use: An alternative to the 30 Vertical Joiner Strip to build a stable and neat framework corner from two Support Beams mated and connected end-to-end at a 30 mitered joint. The fitting is placed in the T-slots and clamped against the slot with Set Screws. Features: Four pre-tapped 5/16 holes accommodate Set Screws, Cap Screws, or Machine Screws for connecting beams and attachments. Material: Mild Steel, Zinc Plated Weight: 0.19 lb [0.09 kg] Hardware Recommended for Assembly: 5/16 - 18 x 5/16 Stainless Steel Set Screws (31C31KKCS), 4 each. Assembly Note: The ends of the two Support Beams have to be cut at 15 to form the 30 mating angle

TEKNO
B0600921
45 Horizontal Joiner Strip
Typical Use: An alternative to the 45 Vertical Joiner Strip to build a stable and neat framework corner or joint from two Support Beams mated and connected end-to-end or endto-side. The fitting is placed in the T-slots and clamped against the slot with Set Screws. Features: Four pre-tapped 5/16 holes accommodate Set Screws, Cap Screws, or Machine Screws for connecting beams and attachments. Material: Mild Steel, Zinc Plated Weight: 0.19 lb [0.09 kg] Hardware Recommended for Assembly: 5/16 - 18 x 5/16 Stainless Steel Set Screws (31C31KKCS), 4 each. Assembly Note: The 45 Horizontal Joiner Strip may connect two beams end-to-end or end-to-side using two different configuration of beam cuts: Each end of the two Support Beams to be mated can be cut at 22.5 to form the 45 mating angle. OR One Support Beam can be cut at a 45 miter joint and fastened along the side of the adjoining beam. This allows lateral positioning of the mitered beam anywhere along the length of the beam to which it is connected.
0.35 [8.76mm]

4-10 Strap Nuts & Joiner Strips

5/16-18 TAPPED (4 PLACES) 0.75 [19.05mm]

0.38 [9.52mm]

0.88 [22.23mm]

3.80 [96.62mm]

.
0.25 [6.35mm]

1.75 [44.53mm] 45

4-11 Strap Nuts & Joiner Strips

TEKNO
B0601021
60 Horizontal Joiner Strip
Typical Use: An alternative to the 60 Vertical Joiner Strip to build a stable and neat framework corner or joint from two Support Beams mated and connected end-to-end or endtoside. The fitting is placed in the T-slots and clamped against the slot with Set Screws. Features: Four pre-tapped 5/16 holes accommodate Set Screws, Cap Screws, or Machine Screws for connecting beams and attachments. Material: Mild Steel, Zinc Plated Weight: 0.19 lb [0.09 kg] Hardware Recommended for Assembly: 5/16 - 18 x 5/16 Stainless Steel Set Screws (31C31KKCS), 4 each. Assembly Note: The 60 Horizontal Joiner Strip may connect two beams end-to-end or end-to-side using two different configuration of beam cuts: Each end of the two Support Beams to be mated can be cut at 30 to form the 60 mating angle. OR One Support Beam can be cut at a 60 miter joint and fastened along the side of the adjoining beam. This allows lateral positioning of the mitered beam anywhere along the length of the beam to which it is connected.

TEKNO
B0601121
90 Horizontal Joiner Strip
Typical Use: An alternative to the 90 Vertical Joiner Strip to build a stable and neat framework corner or joint from two Support Beams mated and connected either end-to-end at a 90 mitered joint or perpendicular to one another end-to-side with square ends. The fitting is placed in the T-slots and clamped against the slot with Set Screws. Features: Four pre-tapped 5/16 holes accommodate Set Screws, Cap Screws, or Machine Screws for connecting beams and attachments. Material: Mild Steel, Zinc Plated Weight: 0.19 lb [0.09 kg] Hardware Recommended for Assembly: 5/16 - 18 x 5/16 Stainless Steel Set Screws (31C31KKCS), 4 each. Assembly Note: The 90 Horizontal Joiner Strip may connect two beams end-to-end or end-to-side using two different configuration of beam cuts: Each end of the two Support Beams to be mated can be cut at 45 to form the 90 mating angle. OR One Support Beam can be cut at a normal 90 and fastened along the side of the adjoining beam. This allows lateral positioning of the mitered beam anywhere along the length of the beam to which it is connected.

4-12 Strap Nuts & Joiner Strips

5/16-18 TAPPED (4 PLACES) 0.75 [19.05mm] 0.88 [22.23mm]

0.38 [9.52mm] 0.35 [8.76mm]

2.38 [60..33mm]

0.25 [6.35mm]

TEKNO
Stair Tread and Walkovers
Teknos Modu-Tek line also allows you to design and build completely modular stair treads and walkovers for your application. Built of the highest quality extruded anodized aluminum, these structures provide lightweight, yet ultra sturdy platforms and staircases. Our tread plate material is designed with a premium on safety; all of our tread plates feature raised rows of teeth for extra traction. We also offer vented tread plate that allows dirt and other accumulates to fall freely through the plate, virtually eliminating the risk of slippage. As is the case with any Modu-Tek product, these structures posess incredible versatility and are easily configured/reconfigured for any application; no drilling or tapping required! Call us today for further information on our Modu-Tek Walkovers and Stair Treads!

This Page Intentionally Left Blank

TEKNO

5-1
SUPPORT FEET & CASTERS

1X1 Slot Center Angle Fixed Foot H0200121 Page 5-4

2X2 Slot Center Angle Fixed Foot H0200221 Page 5-5

3x3 Slot Center Angle Fixed Foot H0200321 Page 5-6

1X1 Slot Leveling Foot Support H0200421 Page 5-7

2X2 Slot Leveling Foot Support H0200521 Page 5-8

3X3 Slot Leveling Foot Support H0200621 Page 5-9

Teardrop Leveling Foot w/ 1/2-13 Stem H0200721 Page 5-10

Teardrop Leveling Foot w/ 3/4-10 Stem H0200821 Page 5-11

1X1 Slot Teardrop Leveling Foot Assembly H0200921 Page 5-12

2X2 Slot Teardrop 3X3 Slot Teardrop Leveling Foot Leveling Foot Assembly Assembly H0201011 H0201111 Page 5-13 Page 5-14

All Metal Leveling Foot with 1/2-13 Stem H0201221 Page 5-15

All Metal Leveling Foot with 3/4-10 Stem H0201321 Page 5-16

Leveling Foot with 1/2-13 Stem & Jam Nut H0201421 Page 5-17

5-2
SUPPORT FEET & CASTERS

TEKNO
Rigid Casters

Rigid Caster Mounting Plates

1X1 Slot Rigid Caster Plate H0300121 Page 5-18

2X2 Slot Rigid Caster Plate H0300221 Page 5-19

3X3 Rigid Caster Plate H0300321 Page 5-20

Rigid Caster with 5 Diameter Wheel H0300421 Page 5-21

Rigid Caster with 3 Diameter Wheel H0300521 Page 5-22

Rigid Caster Assemblies

Swivel Casters W/O Brakes

1X1 Slot Rigid Caster Assy. H0300611 Page 5-23

2X2 Slot Rigid Caster Assy. H0300711 Page 5-24

3X3 Slot Rigid Caster Assy. H0300811 Page 5-25

Swivel Caster with 1/2 Stem H0300921 Page 5-26

Swivel Caster with 3/4 Stem H0301021 Page 5-27

Swivel Casters with Brakes

Swivel Caster with 1/2 Stem and Brake H0301121 Page 5-28

Swivel Caster with 3/4 Stem and Brake H0301221 Page 5-29

TEKNO

5-3
SUPPORT FEET & CASTERS

Swivel Caster Assemblies W/O Brakes

1X1 Slot Swivel Caster Assembly H0301311 Page 5-30

2X2 Slot Swivel Caster Assembly H0301411 Page 5-31

3X3 Slot Swivel Caster Assembly H0301511 Page 5-32

Swivel Caster Assemblies with Brakes

1X1 Slot Swivel Caster Assembly with Brake H0301611 Page 5-33

2X2 Slot Swivel Caster Assembly with Brake H0301711 Page 5-34

3X3 slot Swivel Caster Assembly with Brake H0301811 Page 5-35

5-4
SUPPORT FEET & CASTERS

TEKNO
H0200121
1 x 1 Slot Center Angle Fixed Foot
Typical Use: Fixed support base for 1 x 1 slot support beam legs. Primarily designed for guarding and lighter-weight, non-load bearing applications. Features: Solid base for mounting beam to the floor to provide and anchor for machine guarding, benches, etc. T-slots on two sides of the support beam are accessible to within 0.25 [6.35mm] of the floor. Pre-drilled holes for lagging to the floor. Material: Hot Rolled Steel, Black Powder Coated

4.00 [101.60mm] 1.00 [25.40mm] 0.53 [13.46mm] (4 PLACES)

Weight: 3.75 lbs [1.70 kgs] Hardware Recommended for Assembly: For attachment to support beam: 5/16 - 18 x 5/8 Button Head Cap Screws (31C62KBC), 4 each. Double Square Nuts (H0100721), 4 each. OR 5/16 - 18 x 5/8 Hex Head Cap Screws (31C62HCS5Z), 4 each. Double Square Nuts (H0100721), 4 each. For attachment to floor: 3/8 diameter x 3 3/4 length Wedge Anchors (37C375AWG), 4 each.

0.25 [6.35mm]

1.94 [49.23mm]

0.81 [20.62mm] 0.34 [8.64mm] (4 PLACES)

4.75 [120.65mm]

6.25 [158.75mm]

1.25 [31.75mm]

0.25 [6.35mm]

TEKNO
H0200221
2 x 2 Slot Center Angle Fixed Foot
Typical Use: Fixed support base for 2 x 2 slot support beam legs. Primarily designed for guarding and lighter-weight, non-load bearing applications. Features: Solid base for mounting beam to the floor to provide and anchor for machine guarding, benches, etc. T-slots on two sides of the support beam are accessible to within 0.25 [6.35mm] of the floor. Pre-drilled holes for lagging to the floor. Material: Hot Rolled Steel, Black Powder Coated Weight: 4.50 lbs [2.04 kgs] Hardware Recommended for Assembly: For attachment to support beam: 5/16 - 18 x 5/8 Button Head Cap Screws (31C62KBC), 8 each. Double Square Nuts (H0100721), 8 each. OR 5/16 - 18 x 5/8 Hex Head Cap Screws (31C62HCS5Z), 8 each. Double Square Nuts (H0100721), 8 each. For attachment to floor: 3/8 diameter x 3 3/4 length Wedge Anchors (37C375AWG), 4 each.

5-5
SUPPORT FEET & CASTERS

5-6
SUPPORT FEET & CASTERS

TEKNO
H0200321
3 x 3 Slot Center Angle Fixed Foot
Typical Use: Fixed support base for 3 x 3 slot support beam legs. Primarily designed for guarding and lighter-weight, non-load bearing applications. Features: Solid base for mounting beam to the floor to provide and anchor for machine guarding, benches, etc. T-slots on two sides of the support beam are accessible to within 0.25 [6.35mm] of the floor. Pre-drilled holes for lagging to the floor. Material: Hot Rolled Steel, Black Powder Coated

6.00 [152.40mm] 0.53 [13.46mm] (4 PLACES)

1.00 [25.40mm]

Weight: 8.00 lbs [3.63 kgs] Hardware Recommended for Assembly: For attachment to support beam: 5/16 - 18 x 5/8 Button Head Cap Screws (31C62KBC), 8 each. Double Square Nuts (H0100721), 8 each.

0.25 [6.35mm] 2.06 [52.40mm]

OR 5/16 - 18 x 5/8 Hex Head Cap Screws (31C62HCS5Z), 8 each. Double Square Nuts (H0100721), 8 each. For attachment to floor: 3/8 diameter x 3 3/4 length Wedge Anchors (37C375AWG), 4 each.

0.34 [8.64mm] (8 PLACES)

5.50 [139.70mm]

8.25 [209.55mm]

1.25 [31.75mm]

0.25 [6.35mm]

TEKNO
H0200421
1 x 1 Slot Leveling Foot Support
Typical Use: Mounts to 1 x 1 slot support beams to provide a base for the foot. Features: Pre-drilled holes for mounting to 1 x 1 slot support beam. Tapped hole which accepts a 1/2 shaft for vertical adjustment. Material: Pressure Die-cast Aluminum Weight: 0.13 lb [0.06 kg] Hardware Recommended for Assembly: 1/4 - 20 x 5/8 Socket Head Cap Screws (25C62KCSS), 4 each. Assembly Note: Surface A must be assembled flush with the end of the 1 x 1 Slot Support Beam, i.e. the flange will not fit into the extrusion cavity for reverse mounting.

5-7
SUPPORT FEET & CASTERS

5-8
SUPPORT FEET & CASTERS

TEKNO
H0200521
2 x 2 Slot Leveling Foot Support
Typical Use: Mounts to 2 x 2 slot support beams to provide a base for the foot. Features: Pre-drilled holes for mounting to 2 x 2 slot support beam. Tapped hole which accepts a 3/4 shaft for vertical adjustment. Material: Pressure Die-cast Aluminum Weight: 0.25 lb [0.11 kg] Hardware Recommended for Assembly: 1/4 - 20 x 5/8 Socket Head Cap Screws (25C62KCSS), 4 each. Assembly Note: Unlike the 1 x 1 Slot Leveling Foot Support, either the top or the bottom surface can be assembled flush with the end of the 2 x 2 Slot Support Beam, i.e. the flange will fit into the extrusion cavity for reverse mounting.

TEKNO
H0200621
3 x 3 Slot Leveling Foot Support
Typical Use: Mounts to 3 x 3 slot support beams to provide a base for the foot. Features: Pre-drilled holes for mounting to 3 x 3 slot support beam. Tapped hole which accepts a 3/4 shaft for vertical adjustment. Material: Pressure Die-cast Aluminum Weight: 0.41 lb [0.18 kg] Hardware Recommended for Assembly: 1/4 - 20 x 5/8 Socket Head Cap Screws (25C62KCSS), 4 each. Assembly Note: Unlike the 1 x 1 Slot Leveling Foot Support, either the top or the bottom surface can be assembled flush with the end of the 3 x 3 Slot Support Beam, i.e. the flange will fit into the extrusion cavity for reverse mounting.

5-9
SUPPORT FEET & CASTERS

5-10
SUPPORT FEET & CASTERS

TEKNO
H0200721
Teardrop Leveling Foot 1/2 - 13 Stem
Typical Use: Leveling foot for support beam legs. Specifically designed for mating with 1 x 1 Slot Leveling Foot Supports. Features: Three holes in the base for use in lagging to the floor. Teardrop shape facilitates lagging when clearance for lag bolt drilling is needed. Easy height adjustment with 1/2 mounting rod and included adjustment nut. Weight Capacity: 1,200 lbs [544 kgs] static load Materials: Stem & Leveling Nut: Zinc-plated Steel Base: Glass-filled Nylon Weight: 1.00 lb [0.45 kg] Hardware Recommended for Assembly: None. Hardware Recommended for Attachment to the Floor: 3/8 diameter x 3 3/4 length Wedge Anchors (37C375AWG), 3 each.

TEKNO
H0200821
Teardrop Leveling Foot 3/4 - 10 Stem
Typical Use: Leveling foot for support beam legs. Specifically designed for mating with 2 x 2 and 3 x 3 Slot Leveling Foot Supports. Intended for supporting heavier loads. Features: Three holes in the base for use in lagging to the floor. Teardrop shape facilitates lagging when clearance for lag bolt drilling is needed. Easy height adjustment with 3/4 mounting rod and included adjustment nut. Weight Capacity: 1,800 lbs [816 kgs] static load Materials: Stem & Leveling Nut: Zinc-plated Steel Base: Glass-filled Nylon Weight: 1.50 lbs [0.68 kg] Hardware Recommended for Assembly: None. Hardware Recommended for Attachment to the Floor: 3/8 diameter x 3 3/4 length Wedge Anchors (37C375AWG), 3 each.

5-11
SUPPORT FEET & CASTERS

5-12
SUPPORT FEET & CASTERS

TEKNO
H0200911
1 x 1 Slot Teardrop Leveling Foot Assembly
Typical Use: Leveling foot and accompanying 1 x 1 Slot Leveling Foot Support and hardware specifically designed for mating with 1 x 1 Slot Support Beam legs. Features: Three holes in the base for use in lagging to the floor. Teardrop shape facilitates lagging when clearance for lag bolt drilling is needed. Easy height adjustment with 1/2 mounting rod and included adjustment nut. Mounting hardware included as described below. Weight Capacity: 1,200 lbs [544 kgs] static load Materials: Stem & Leveling Nut: Zinc-plated Steel Base: Glass-filled Nylon Support (provides mounting surface for support beam): Pressure Die-cast Aluminum Socket Head Cap Screws: 18 - 8 Stainless Steel Weight: 1.20 lbs [0.54 kg] Hardware Included: Teardrop Leveling Foot with 1/2 - 13 Stem (H0200721), 1 each. 1 x 1 Slot Leveling Foot Support (H0200421), 1 each. 1/4 - 20 x 1 PanTorx Type F Plated (25C100PTFZ), 4 each. 1/2 - 13 Standard Hex Nut (50CNFHZ), 1 each. Hardware Recommended for Attachment to the Floor: 3/8 diameter x 3 3/4 length Wedge Anchors (37C375AWG), 3 each.

TEKNO
Notes:

SUPPORT FEET & CASTERS

5-13
SUPPORT FEET & CASTERS

TEKNO
H0201011
2 x 2 Slot Teardrop Leveling Foot Assembly
Typical Use: Leveling foot and accompanying 2 x 2 Slot Leveling Foot Support and hardware specifically designed for mating with 2 x 2 Slot Support Beam legs. Features: Three holes in the base for use in lagging to the floor. Teardrop shape facilitates lagging when clearance for lag bolt drilling is needed. Easy height adjustment with 3/4 mounting rod and included adjustment nut. Mounting hardware included as described below. Weight Capacity: 1,800 lbs [816 kgs] static load Materials: Stem & Leveling Nut: Zinc-plated Steel Base: Glass-filled Nylon Support (provides mounting surface for support beam): Pressure Die-cast Aluminum Socket Head Cap Screws: 18 - 8 Stainless Steel Weight: 1.80 lbs [0.82 kg] Hardware Included: Teardrop Leveling Foot with 3/4 - 10 Stem (H0200821), 1 each. 2 x 2 Slot Leveling Foot Support (H0200521), 1 each. 1/4 - 20 x 1 PanTorx Type F Plated (25C100PTFZ), 4 each. 3/4 - 10 Standard Hex Nut (75CNFHZ), 1 each. Hardware Recommended for Attachment to the Floor: 3/8 diameter x 3 3/4 length Wedge Anchors (37C375AWG), 3 each.

TEKNO
H0201111
3 x 3 Slot Teardrop Leveling Foot Assembly
Typical Use: Leveling foot and accompanying 3 x 3 Slot Leveling Foot Support and hardware specifically designed for mating with 3 x 3 Slot Support Beam legs. Features: Three holes in the base for use in lagging to the floor. Teardrop shape facilitates lagging when clearance for lag bolt drilling is needed. Easy height adjustment with 3/4 mounting rod and included adjustment nut. Mounting hardware included as described below. Weight Capacity: 1,800 lbs [816 kgs] static load Materials: Stem & Leveling Nut: Zinc-plated Steel Base: Glass-filled Nylon Support (provides mounting surface for support beam): Pressure Die-cast Aluminum Socket Head Cap Screws: 18 - 8 Stainless Steel Weight: 2.00 lbs [0.91 kg] Hardware Included: Teardrop Leveling Foot with 3/4 - 10 Stem (H0200821), 1 each. 3 x 3 Slot Leveling Foot Support (H0200621), 1 each. 1/4 - 20 x 1 PanTorx Type F Plated (25C100PTFZ), 4 each. 3/4 - 10 Standard Hex Nut (75CNFHZ), 1 each. Hardware Recommended for Attachment to the Floor: 3/8 diameter x 3 3/4 length Wedge Anchors (37C375AWG), 3 each.

5-14
SUPPORT FEET & CASTERS

0.50 [12.70mm]

6.75 [171.45mm] 3.88 [98.43mm]

0.53 [13.46mm]

0.50 [12.70mm] (3 PLACES)

4.75 3.69 [93.73mm] [120.65mm]

2.22 [56.49mm] UPWARD ADJUSTMENT

8.22 [208.89mm] 0.92 [23.42mm] DOWNWARD ADJUSTMENT 6.00 [152.40mm]

5-15
SUPPORT FEET & CASTERS

TEKNO
H0201221
All Metal Leveling Foot with 1/2 13 Stem
Typical Use: Leveling foot for support beam legs. Specifically designed for mating with 1 x 1 Slot Leveling Foot Supports (H0200421). Features: Easy height adjustment with included adjustment nut. Weight Capacity: 5,000 lbs [2,268 kgs] static load Material: Yellow Zinc-plated Steel Weight: 0.50 lb [0.23 kg] Hardware Recommended for Assembly: None.

TEKNO
H0201321
All Metal Leveling Foot with 3/4 10 Stem
Typical Use: Leveling foot for support beam legs. Specifically designed for mating with 2 x 2 and 3 x 3 Slot Leveling Foot Supports (H0200521 & H0200621 respectively). Features: Easy height adjustment with included adjustment nut. Weight Capacity: 7,400 lbs [3,357 kgs] static load Material: Yellow Zinc-plated Steel Weight: 1.75 lbs [0.79 kg] Hardware Recommended for Assembly: None.

5-16
SUPPORT FEET & CASTERS

5-17
SUPPORT FEET & CASTERS

TEKNO
H0201421
Leveling Foot with 1/2 - 13 Stem
Typical Use: Leveling foot for the support of light duty applications such as table top applications, small tables, etc. Features: Non-skid base. Easy height adjustment with screw driver and included adjustment nut. Weight Capacity: 700 lbs [318 kgs] static load Materials: Stem & Shell: Chrome-plated Steel Base: Grey Nylon Weight: 0.24 lb [0.11 kg] Hardware Recommended for Assembly: None.

TEKNO
H0300121
1 x 1 Slot Rigid Caster Adapter Plate
Typical Use: To connect a rigid caster to a 1 x 1 Slot Support Beam. Features: Provides a transition plate for the mounting of an appropriate rigid caster to the end of a 1 x 1 Support Beam. Material: Clear Anodized Aluminum Weight: 0.39 lb [0.18 kg] Hardware Recommended for Assembly: 1/4 - 20 x 1 Socket Head Cap Screws (25C100KCSS), 4 each.

5-18
SUPPORT FEET & CASTERS

5-19
SUPPORT FEET & CASTERS

TEKNO
H0300221
2 x 2 Slot Rigid Caster Adapter Plate
Typical Use: To connect a rigid caster to a 2 x 2 Slot Support Beam. Features: Provides a transition plate for the mounting of an appropriate rigid caster to the end of a 2 x 2 Support Beam. Material: Clear Anodized Aluminum Weight: 0.41 lb [0.19 kg] Hardware Recommended for Assembly: 1/4 - 20 x 1 Socket Head Cap Screws (25C100KCSS), 4 each.

TEKNO
H0300321
3 x 3 Slot Rigid Caster Adapter Plate
Typical Use: To connect a rigid caster to a 3 x 3 Slot Support Beam. Features: Provides a transition plate for the mounting of an appropriate rigid caster to the end of a 3 x 3 Support Beam. Material: Clear Anodized Aluminum Weight: 0.57 lb [0.26 kg] Hardware Recommended for Assembly: 1/4 - 20 x 1 Socket Head Cap Screws (25C100KCSS), 4 each.

5-20
SUPPORT FEET & CASTERS

5-21
SUPPORT FEET & CASTERS

TEKNO
H0300521
Rigid Caster with 3.0 in [76.2 mm] Diameter Wheel
Typical Use: Fixed caster with a 3.0 in [76.2 mm] wheel for mating with a 1 x 1 Slot Rigid Caster Adapter Plate (B0500121). Features: Heavy gauge cold rolled steel, formed for strength. Weight Capacity: 150 lbs [68 kgs] Materials: Wheel: Cushion Tread Rubber. Housing: Mild Steel, Bright Zinc Plated. Weight: 1.69 lbs [0.77 kg] Hardware Recommended for Assembly: 1/4 - 20 x 5/8 Socket Head Cap Screws (25C62KCSS), 4 each.

TEKNO
H0300421
Rigid Caster with 5.0 in [127.0 mm] Diameter Wheel
Typical Use: Fixed caster with a 5.0 in [127.0 mm] wheel for mating with a 2 x 2 or 3 x 3 Slot Rigid Caster Mounting Plate (H0300211 & H0300321 respectively). Features: Heavy gauge cold rolled steel, formed for strength. Weight Capacity: 200 lbs [91 kgs] Materials: Wheel: Cushion Tread Rubber. Housing: Mild Steel, Bright Zinc Plated. Weight: 2.00 lbs [0.91 kg] Hardware Recommended for Assembly: 1/4 - 20 x 5/8 Socket Head Cap Screws (25C62KCSS), 4 each.

5-22
SUPPORT FEET & CASTERS

5-23
SUPPORT FEET & CASTERS

TEKNO
H0300611
1 x 1 Slot Rigid Caster Assembly
Typical Use: Assembly mounts to the end of a 1 x 1 Slot Support Beam (E0100201) to provide fixed caster mobility. Features: All mounting hardware included. Weight Capacity: 150 lbs [68 kgs] Materials: Wheel: Cushion Tread Rubber. Housing: Mild Steel, Bright Zinc Plated. Mounting Plate: Clear Anodized Aluminum. Weight: 2.50 lbs [1.13 kgs] Assembly Hardware Included: Rigid Caster with 3.0 [76.2mm] Diameter Wheel (MEAAD0700V015), 1 each. 1 x 1 Slot Rigid Caster Adapter Plate (H0300121), 1 each. 1/4 - 20 x 1 Socket Head Cap Screws (25C100KCSS), 4 each. 1/4 - 20 x 5/8 Socket Head Cap Screws (25C62KCSS), 4 each. Hardware Recommended for Assembly: None.

3.63 [92.08mm]

2.38 [60.33mm]

0.50 [12.70mm]

.
4.13 [104.78mm]

3.00 [76.20mm]

TEKNO
H0300711
2 x 2 Slot Rigid Caster Assembly
Typical Use: Assembly mounts to the end of a 2 x 2 Slot Support Beam (E0100501) to provide fixed caster mobility. Features: All mounting hardware included. Weight Capacity: 200 lbs [91 kgs] Materials: Wheel: Cushion Tread Rubber. Housing: Mild Steel, Bright Zinc Plated. Mounting Plate: Clear Anodized Aluminum. Weight: 3.00 lbs [1.36 kgs] Assembly Hardware Included: Rigid Caster with 5.0 in [127.0 mm] Diameter Wheel (MEAAD0700V016), 1 each. 2 x 2 Slot Rigid Caster Adapter Plate (H0300211), 1 each. 1/4 - 20 x 1 Socket Head Cap Screws (25C100KCSS), 4 each. 1/4 - 20 x 5/8 Socket Head Cap Screws (25C62KCSS), 4 each. Hardware Recommended for Assembly: None.

5-24
SUPPORT FEET & CASTERS

5-25
SUPPORT FEET & CASTERS

TEKNO
H0300811
3 x 3 Slot Rigid Caster Assembly
Typical Use: Assembly mounts to the end of a 3 x 3 Slot Support Beam (E0100701) to provide fixed caster mobility. Features: All mounting hardware included. Weight Capacity: 200 lbs [91 kgs] Materials: Wheel: Cushion Tread Rubber. Housing: Mild Steel, Bright Zinc Plated. Mounting Plate: Clear Anodized Aluminum. Weight: 3.94 lbs [1.79 kgs] Assembly Hardware Included: Rigid Caster with 5.0 in [127.0 mm] Diameter Wheel (MEAAD0700V016), 1 each. 3 x 3 Slot Rigid Caster Adapter Plate (H0300321), 1 each. 1/4 - 20 x 1 Socket Head Cap Screw (25C100KCSS), 4 each. 1/4 - 20 x 5/8 Socket Head Cap Screw (25C62KCSS), 4 each. Hardware Recommended for Assembly: None.

3.63 [92.08mm]

3.38 [85.73mm]

0.50 [12.70mm]

6.25 [158.75mm]

5.00 [127.00mm]

TEKNO
H0300921
Swivel Caster with 1/2 Stem
Typical Use: Caster with a 1/2 stem for mating with a 1 x 1 Slot Leveling Foot Support. Features: Caster swivels 180 upon double ball bearings and hardened raceways. Weight Capacity: 150 lbs [68 kgs] Materials: Wheel: Cushion Tread Rubber. Housing: Mild Steel, Bright Zinc Plated. Weight: 1.56 lbs [0.71 kg] Hardware Recommended for Assembly: 9/16 x 2 1/2 Caster Washer (56N250WSDZ/125), 1 each.

5-26
SUPPORT FEET & CASTERS

5-27
SUPPORT FEET & CASTERS

TEKNO
H0301021
Swivel Caster with 3/4 Stem
Typical Use: Caster with a 3/4 stem for mating with 2 x 2 and 3 x 3 Slot Leveling Foot Supports. Features: Caster swivels 180 upon double ball bearings and hardened raceways. Weight Capacity: 200 lbs [91 kgs] Materials: Wheel: Cushion Tread Rubber. Housing: Mild Steel, Bright Zinc Plated. Weight: 2.06 lbs [0.94 kg] Hardware Recommended for Assembly: 13/16 x 2 1/2 Caster Washer (81N250WSDZ/125), 1 each.

TEKNO
H0301121
Swivel Caster with 1/2 Stem with Brake
Typical Use: Brakeable caster with a 1/2 stem for mating with a 1 x 1 Slot Leveling Foot Support. Features: Caster swivels 180 upon double ball bearings and hardened raceways. Built-in brake mechanism. Weight Capacity: 150 lbs [68 kgs] Materials: Wheel: Cushion Tread Rubber. Housing: Mild Steel, Bright Zinc Plated. Weight: 1.69 lbs [0.77 kg] Hardware Recommended for Assembly: 9/16 x 2 1/2 Caster Washer (56N250WSDZ/125), 1 each.

5-28
SUPPORT FEET & CASTERS

5-29
SUPPORT FEET & CASTERS

TEKNO
H0301221
Swivel Caster with 3/4 Stem with Brake
Typical Use: Brakeable caster with a 3/4 stem for mating with 2 x 2 and 3 x 3 Slot Leveling Foot Supports. Features: Caster swivels 180 upon double ball bearings and hardened raceways. Built-in brake mechanism. Weight Capacity: 200 lbs [91 kgs] Materials: Wheel: Cushion Tread Rubber. Housing: Mild Steel, Bright Zinc Plated. Weight: 2.81 lbs [1.28 kgs] Recommended Hardware for Assembly: 13/16 x 2 1/2 Caster Washer (81N250WSDZ/125), 1 each.

TEKNO
H0301311
1 x 1 Slot Swivel Caster Assembly
Typical Use: Assembly mounts to the end of a 1 x 1 Slot Support Beam to provide swivel caster mobility. Features: Caster swivels 180 upon double ball bearings and hardened raceways. 1/2 diameter rod. Mounting hardware included. Weight Capacity: 150 lbs [68 kgs] Materials: Wheel: Cushion Tread Rubber. Housing: Mild Steel, Bright Zinc Plated. Weight: 1.75 lbs [0.79 kg] Assembly Hardware Included: Swivel Caster with 1/2 - 13 Stem (H0300921), 1 each. 1 x 1 Slot Leveling Foot Support (H0200421), 1 each. 1/4 - 20 x 1 PanTorx Type F Plated (25C100PTFZ), 4 each. 9/16 x 2 1/2 Caster Washer (56N250WSDZ/125), 1 each. Hardware Recommended for Assembly: None.

5-30
SUPPORT FEET & CASTERS

5-31
SUPPORT FEET & CASTERS

TEKNO
H0301411
2 x 2 Slot Swivel Caster Assembly
Typical Use: Assembly mounts to the end of a 2 x 2 Slot Support Beam to provide swivel caster mobility. Features: Caster swivels 180 upon double ball bearings and hardened raceways. 3/4 diameter rod. Mounting hardware included. Weight Capacity: 200 lbs [91 kgs] Materials: Wheel: Cushion Tread Rubber. Housing: Mild Steel, Bright Zinc Plated. Weight: 2.88 lbs [1.30 kgs] Assembly Hardware Included: Swivel Caster with 3/4 - 10 Stem (H0301021), 1 each. 2 x 2 Slot Leveling Foot Support (H0200521), 1 each. 1/4 - 20 x 1 PanTorx Type F Plated (25C100PTFZ), 4 each. 13/16 x 2 1/2 Caster Washer (81N250WSDZ/125), 1 each. Hardware Recommended for Assembly: None.

TEKNO
H0301511
3 x 3 Slot Swivel Caster Assembly
Typical Use: Assembly mounts to the end of a 3 x 3 Slot Support Beam to provide swivel caster mobility. Features: Caster swivels 180 upon double ball bearings and hardened raceways. 3/4 diameter rod. Mounting hardware included. Weight Capacity: 200 lbs [91 kgs] Materials: Wheel: Cushion Tread Rubber. Housing: Mild Steel, Bright Zinc Plated. Weight: 3.00 lbs [1.36 kgs] Assembly Hardware Included: Swivel Caster with 3/4 - 10 Stem (H0301021), 1 each. 3 x 3 Slot Leveling Foot Support (H0200621), 1 each. 1/4 - 20 x 1 PanTorx Type F Plated (25C100PTFZ), 4 each. 13/16 x 2 1/2 Caster Washer (81N250WSDZ/125), 1 each. Hardware Recommended for Assembly: None

5-32
SUPPORT FEET & CASTERS

5-33
SUPPORT FEET & CASTERS

TEKNO
H0301611
1 x 1 Slot Swivel Caster Assembly with Brake
Typical Use: Assembly mounts to the end of a 1 x 1 Slot Support Beam to provide brakeable swivel caster mobility. Features: Caster swivels 180 upon double ball bearings and hardened raceways. 1/2 diameter rod. Built-in on/off brake mechanism. Mounting hardware included. Weight Capacity: 150 lbs [68 kgs] Materials: Wheel: Cushion Tread Rubber. Housing: Mild Steel, Bright Zinc Plated. Weight: 1.88 lbs [0.85 kg] Assembly Hardware Included: Swivel Caster with 1/2 - 13 Stem with Brake (H0301121), 1 each. 1 x 1 Slot Leveling Foot Support (H0200421), 1 each. 1/4 - 20 x 1 PanTorx Type F Plated (25C100PTFZ), 4 each. 9/16 x 2 1/2 Caster Washer (56N250WSDZ/125), 1 each. Hardware Recommended for Assembly: None.

1/2 - 13 X 1 1/2 STEM

3.96 [100.66mm] SWIVEL RADIUS

1.50 [38.02mm]

4.80 [121.82mm] LOAD HEIGHT

3.94 [100.00mm]

3.00 [76.20mm] WHEEL 1.38 [35.05mm] OFFSET

TEKNO
H0301711
2 x 2 Slot Swivel Caster Assembly with Brake
Typical Use: Assembly mounts to the end of a 2 x 2 Slot Support Beam to provide brakeable swivel caster mobility. Features: Caster swivels 180 upon double ball bearings and hardened raceways. 3/4 diameter rod. Built-in on/off brake mechanism. Mounting hardware included. Weight Capacity: 200 lbs [91 kgs] Materials: Wheel: Cushion Tread Rubber. Housing: Mild Steel, Bright Zinc Plated. Weight: 3.00 lbs [1.36 kgs] Assembly Hardware Included: Swivel Caster with 3/4 - 10 Stem with Brake (H0301221), 1 each. 2 x 2 Slot Leveling Foot Support (H0200521), 1 each. 1/4 - 20 x 1 PanTorx Type F Plated (25C100PTFZ), 4 each. 13/16 x 2 1/2 Caster Washer (81N250WSDZ/125), 1 each. Hardware Recommended for Assembly: None.

5-34
SUPPORT FEET & CASTERS

5-35
SUPPORT FEET & CASTERS

TEKNO
H0301811
3 x 3 Slot Swivel Caster Assembly with Brake
Typical Use: Assembly mounts to the end of a 3 x 3 Slot Support Beam to provide brakeable swivel caster mobility. Features: Caster swivels 180 upon double ball bearings and hardened raceways. 3/4 diameter rod. Built-in on/off brake mechanism. Mounting hardware included. Weight Capacity: 200 lbs [91 kgs] Materials: Wheel: Cushion Tread Rubber. Housing: Mild Steel, Bright Zinc Plated. Weight: 3.19 lbs [1.45 kgs] Assembly Hardware Included: Swivel Caster with 3/4 - 10 Stem with Brake (H0301221), 1 each. 3 x 3 Slot Leveling Foot Support (H0200621), 1 each. 1/4 - 20 x 1 PanTorx Type F Plated (25C100PTFZ), 4 each. 13/16 x 2 1/2 Caster Washer (81N250WSDZ/125), 1 each. Hardware Recommended for Assembly: None.

3/4 - 10 X 1 3/4 STEM

4.47 [113.49mm] SWIVEL RADIUS

1.75 [44.45mm]

7.58 [192.56mm] LOAD HEIGHT 6.06 [153.87mm]

5.00 [127.00mm] WHEEL 1.44 [36.53mm] OFFSET

TEKNO
Notes:

SUPPORT FEET & CASTERS

TEKNO
Stair Tread and Walkovers
Teknos Modu-Tek line also allows you to design and build completely modular stair treads and walkovers for your application. Built of the highest quality extruded anodized aluminum, these structures provide lightweight, yet ultra sturdy platforms and staircases. Our tread plate material is designed with a premium on safety; all of our tread plates feature raised rows of teeth for extra traction. We also offer vented tread plate that allows dirt and other accumulates to fall freely through the plate, virtually eliminating the risk of slippage. As is the case with any Modu-Tek product, these structures posess incredible versatility and are easily configured/reconfigured for any application; no drilling or tapping required! Call us today for further information on our Modu-Tek Walkovers and Stair Treads!

This Page Intentionally Left Blank

TEKNO
T - Bolts Self Tapping Screws

6-1
ASSEMBLY HARDWARE
Set Screws

T - Bolts Part Nos. Shown in TBOLT Ordering Chart Page 6-3

6 Lobe Flat Head Thread Cutting Cap Screw, Type F 1/4 - 20 x 1 1/4 25C125TTF Page 6-4

Self Tapping Screw For Guide Rail #8 x 1/4 8N25TPC Page 6-4

Cup Point Socket Set Screws Part Nos. Shown in SHSS Ordering Chart Page 6-4

Nuts

Screws

Washers

Nylon insert Hext Lock Nuts Part Nos. Shown in HLNUT Ordering Chart Page 6-4

Flange Nut 5/16-18 31CNNEFW Page 6-5

Flat Head Cap Screw 1/2 - 13 x 7/8 50C88KFC Page 6-5

Flat Caster Washers Part Nos. Shown in FCWasher Ordering Chart Page 6-5

Torx Screw

Double Square Nut5/16-18 & 1/4-20 H0100721 Page 6-6

Thin Spring Strut Nuts Part Nos. Shown in SPRING NUT Ordering Chart Page 6-6

Torx Screw 1/4-20x1 25C100PTFZ Page 6-7

Flat Washers Part Nos. Shown in FWASHER Ordering Chart Page 6-7

Lock Washers Part Nos. Shown in LWASHER Ordering Chart Page 6-7

6-2
ASSEMBLY HARDWARE
Fastener Torque Recommendations

TEKNO

Application

Fastener Type

Recommended Torque (lbs.-ft.)


16

Corner Tab Bracket into Square Nut Corner Tab Bracket into Square Nut End Plate into Support Beam Heavy Duty Corner Tab Bracket into Square Nut Square Nut into Support Beam T-slot Square Nut into Support Beam T-slot Web Brackets, etc. into 5/16" Lock Nut & Washer End of Support Beam

5/16" - 18 Hex Head Cap Screw 5/16" - 18 Button Head Cap Screw 1/4" - 20 Flat Head Cap Screw 5/16" - 18 Flat Head Cap Screw 1/4" - 20 Socket Set Screw

16

14

17

5/16" - 18 Socket Set Screw

5/16" - 18 T-Bolt 1/4" - 20 x 1 1/4" 6-Lobe Thread Cutting Screw 1/4" - 20 x 1" Socket Head Cap Screw 5/16" - 18 Hex Head Cap Screw

12

14

End of Support Beam Web Bracket into Square Nut

14

16

TEKNO

6-3
ASSEMBLY HARDWARE

T-Bolts
Typical Use: To secure mounting hardware to support beam T-slots. Features: Easy twist and locate installation from the side of the beam. Indicator slot to identify proper orientation. The T-Bolt is known to be fastened correctly when the indicator slot is perpendicular to the support beam T-slot. Material: Low Carbon Steel, Zinc Plated.
0.23 [5.84mm] L 0.75 [19.05mm]

5/16 - 18

0.42 [10.67mm]

20.22mm [0.80]

5.34mm [0.21] 27.34mm [1.08]

M8 X 125 THD.

10.67mm [0.42]

T-BOLT Ordering Chart:


Part Number H0100121 H0100221 H0100321 H0100421 H0100521 H0100621 Description 3/4" T-Bolt 7/8" T-Bolt 1" T-Bolt 1 1/4" T-Bolt 1 1/2" T-Bolt M8-1.25 T-Bolt Length (L) 0.98 in 1.10 in 1.23 in 1.48 in 1.73 in 27.34 mm Weight (lb/kg) 0.03/0.01 0.04/0.02 0.04/0.02 0.04/0.02 0.05/0.02 0.03/0.01 List Price

6-4
ASSEMBLY HARDWARE

TEKNO

6-Lobe Flat Head Thread Cutting Cap Screw, Type F


P a rt Num be r 25C125TTF De scription 1/4" - 20 x 1 1/4" M a te ria l S teel, B lac k Ox ide W e ight (lb/kg) List P rice 0.02/0.01

Self Tapping-Screw, For Snap On Guide Rail

P a rt Num be r 8N25TP C

De scription #8 X 1/4"

M a te ria l S teel,B lac k Ox ide

W e ight (lb/kg) List P rice 0.02/0.01

Cup Point Socket Set Screws


SHSS Ordering Chart:
P a rt Num be r 25C31K K CS 31C31K K CS 31C37K K CS 10F100K K CS De scription 1/4" - 20 x 5/16" 5/16" - 18 x 5/16" 5/16" - 18 x 3/8" 10 - 32 x 1" 18-8 18-8 18-8 18-8 M a te ria l S tainles s S teel S tainles s S teel S tainles s S teel S tainles s S teel W e ight (lb/kg) 0.01/0.01 0.01/0.1 0.01/0.01 0.02/0.01 List P rice

Nylon Insert Hex Lock Nuts


Features: Nylon Locking Insert.

HLNUT Ordering Chart:


Part Number 31CNTEZ .80CNNE Description 5/16" - 18 Thin Height M8 - 1.25 Material Steel, Zinc Plated Steel, Zinc Plated W eight (lb/kg) List Price 0.01/0.01 0.01/0.01

TEKNO
Flange Nuts

6-5
ASSEMBLY HARDWARE

Part Number 31CNNEFW

Description 5/16" - 18

Material Steel, Zinc Plated

Weight (lb/kg) List Price 0.01/0.01

Flat Head Cap Screw

Pa rt Num be r 50C88KFC

Description 1/2"-13 x 7/8"

Ma te rial Steel,Black Oxide

W e ight (lb/kg) List Price 0.01/0.01

Flat Caster Washers


* Typical Use: To create a rotation plate between a caster and a Leveling Foot Support. Features: Distributes load across the casters ball bearings.

FCWASHER Ordering Chart


Part Number Description Material Weight (lb/kg) 0.01/0.001

56N250WSDZ/125

9/16 X 2 (for stem caster) 13/16 X 2 (for stem caster)

Zinc Plated Steel

81N250WSDZ/125

Zinc Plated Steel

0.01/0.001

6-6
ASSEMBLY HARDWARE
H0100721
Double Square Nut 5/16-18 & 1/4-20
Typical Uses: To secure mounting hardware to support beam T-slots. Used in place of a T-Bolt for increased surface contact with the T-slot profile to provide high loading capacity. Provides easy movement within the length of extrusion T-slots for easier positioning and adjustment of attachments. Features: Secured in T-slots with 1/4 - 20 or 5/16 18 set screws and attached to hardware with 1/4 - 20 or 5/16 - 18 screws. Weight: 0.05 lb [0.02 kg] Hardware Recommended for Assembly: 1/4 - 20 Cup Point Socket Set Screw (25C31KKCS), 1 each. 5/16 - 18 Cup Point Socket Set Screw (31C31KKCS), 1 each.
0.38 [9.52mm]

TEKNO

0.38 [9.52mm] 0.38 [9.52mm]

0.25 [6.35mm]

0.75 [19.05mm] 1.00 [25.40mm]

Thin Spring Strut Nuts


Typical Use: To secure mounting hardware to support beam T-slots. Features: The design allows for the insertion of the nut into Support Beam T-slots from the side of the extrusion. The nut is held in place by the compressed spring until tightened by a screw.

SPRING NUT Ordering Chart:


P a rt Num be r /G1534 /G1532 De scription 1/4" - 20" 10 32 M a te ria l S teel, Zinc P lated S teel, Zinc P lated W e ig ht (lb/kg) L ist P rice 0.03/0.01 0.04/0.02

TEKNO

6-7
ASSEMBLY HARDWARE

1/4-20 X 1 PAN TORX TYPE F ZINC PLATED

P a rt Nu m be r 25C100P TFZ

De scription 1/4" - 20 x 1

M a te ria l Zinc P lated S teel

W e ight (lb /kg) List P rice 0.04/0.02

Part Number 25NWSAZ 68N34WSDZ/089 37NWSAZ 50NWSAZ 75NWSAZ

Description 1/4" 5/16" 3/8" 1/2" 3/4"

Material Steel,Zinc Plated,Grade 8 Steel,Zinc Plated,Grade 8 Steel,Zinc Plated,Grade 8 Steel,Zinc Plated,Grade 8 Steel,Zinc Plated,Grade 8

Weight (lb/kg) 0.01/0.01 0.01/0.01 0.01/0.01 0.01/0.01 0.01/0.01

List Price

Lock Washers LWASHER Ordering Chart:


Part Number Description Material Zinc Plated Steel Medium Carbon, Heat Treated Zinc Plated Steel Medium Carbon, Heat Treated Zinc Plated Steel Medium Carbon, Heat Treated Weight (lb/kg) 0.01/0.001

25NLOCZ

31NLOCZ

5/16

0.01/0.001

37NLOCZ

3/8

0.01/0.001

7-1
BEAM END CAPS

TEKNO

Beam End Caps


Typical Uses: To cover the exposed ends of Support Beams. Presents a neat, finished look when used to complete a structure. Features: Push-lock tabs secure the end caps during assembly without the use of special tools. The end caps may be removed from beam ends without damage, so they can be used again. Material: Black Nylon. Hardware or Tools Required for Assembly: None. 1 x 2 Slot End Cap H0400321 Page 7-3 1 x 3 Slot EndCap H0400421 Page 7-3

Tri-Slot End Cap H0400121 Page 7-2

1 x 1 Slot End Cap H0400221 Page 7-2

2 x 2 Slot End Cap H0400521 Page 7-4

2 x 3 Slot End Cap H0400621 Page 7-4

3 x 3 Slot End Cap H0400721 Page 7-5

Guide Rail Lead In H0900221 Page 7-5

TEKNO
H0400121
Tri-Slot End Cap 1.28 in x 1.00 in [32.51 mm x 25.40 mm]
Weight: 0.01 lb [0.01 kg]

7-2
BEAM END CAPS

1.28 [32.61mm]

0.75 [19.05mm]

0.50 [12.70mm] 1.00 [25.40mm]

0.25 [6.35mm]

H0400221
1 x 1 Slot End Cap 1.63 in [41.40 mm] Square
Weight: 0.02 lb [0.01 kg]

0.75 [19.02mm] 0.25 [6.35mm] 0.25 [6.35mm]

1.63 [41.28mm]

1.13 [28.58mm]

7-3
BEAM END CAPS

TEKNO

H0400321
1 x 2 Slot End Cap 1.63 in x 2.50 in [41.40 mm x 63.50 mm]
Weight: 0.03 lb [0.01 kg]

H0400421
1 x 3 Slot End Cap 1.63 in x 3.38 in [41.40 mm x 85.85 mm]
0.25 [6.35mm] 2.88 [73.03mm] 0.25 [6.35mm]

1.13 [28.58mm]

Weight: 0.04 lb [0.02 kg]


1.62 [41.10mm]

.
0.75 [19.05mm] 3.38 [85.73mm]

TEKNO

7-4
BEAM END CAPS

H0400621
2 x 2 Slot End Cap 2.50 in [63.50 mm] Square

Weight: 0.04 lb [0.03 kg]

H0400621
2 x 3 Slot End Cap 2.50 in x 3.38 in [63.50 mm x 85.85 mm]
Weight: 0.05 lb [0.02 kg]
0.25 [6.35mm] 2.88 [73.03mm] 0.25 [6.35mm]

2.50 [63.50mm]

2.00 [50.80mm]

0.75 [19.02mm]

3.37 [85.67mm]

7-5
BEAM END CAPS

TEKNO

H0400721
3 x 3 Slot End Cap 3.38 in [85.85 mm] Square
Weight: 0.06 lb [0.03 kg]

.
0.25 [6.35mm]

3.37 [85.70mm]

2.88 [73.03mm]

0.75 [19.02mm]

0.25 [6.35mm]

H0900221 Guide Rail Lead In


Weight: 0.02 lb

. Hardware Recommended for Assembly: Self-Tapping Screw for Snap-On Guiderail (pp 6-4)

TEKNO
Notes:

7-5
BEAM END CAPS

7-6
BEAM END CAPS Notes:

TEKNO

TEKNO

8-1
ELECTRICAL COMPONENTS

Standard Aluminum Wireway Components

Wireway E0600121 Page 8-2

Wireway Cover E0600221 Page 8-3

Wireway Divider H0600121 Page 8-4

Wireway End Plate H0500121 Page 8-5

Wireway Junction Components

45 Wireway Junction Components

Wireway Junction E0600321 Page 8-6

Wireway Junction End Plate H0500221 Page 8-7

45 Wireway Junction Cover E0600421 Page 8-8

45 Wireway Junction End Plate H0500321 Page 8-9

Plastic Wireway

Junction Boxes

Plastic Wireway E0500121 Page 8-10

3-Hole 45 Junction Box V0201111 Page 8-11

1-Hole 45 Junction Box V0200411 Page 8-12

2-Hole 45 Junction Box V0200511 Page 8-13

3-Hole 45 Junction Box V0200611 Page 8-14

4-Hole 45 Junction Box V0200711 Page 8-15

5-Hole 45 Junction Box V0200811 Page 8-16

6-Hole 45 Junction Box V0200911 Page 8-17

8-2
ELECTRICAL COMPONENTS

TEKNO
E0600121
Wireway
Typical Use: For the routing of air and electrical lines between termination points. Features: The standard Modu-Tek T-slot configuration on each side of the extrusion allows the use of standard mounting hardware to fasten the wireway to all T-slotted structural extrusions. V-shaped indentation marks running along the length of three sides of the extrusion facilitate the proper alignment of a knockout punch for the attachment of conduit fittings. The standard 3 x 3 Slot End Cap (H0400721) fits the extrusion profile. The open top with snap-in wireway cover allows easy access for wiring. Material: 6063-T6 Aluminum Alloy with a 201-R1 Clear Anodize Exterior Finish. Cross Sectional Area (A): 1.70 in2 [10.94 cm2] Weight Per Foot: 1.99 lbs [0.90 kg] Standard Length: 20 ft [6.1 m] Maximum Length Available: 20 ft [6.1 m] Assembly Notes: 5/16 - 18 x 3/8 Set Screws (31C37KKCS) are required to be used in place of 5/16 - 18 x 5/16 Set Screws (31C31KKCS) when joining wireway sections together with joiner strips. The knockout holes require a special tool to create. Please give the length and location of junction knockouts when ordering.

COVER CAN PIVOT TO 10 FROM THE VERTICAL PLANE

0.23 [5.72mm] (4 PLACES) 2.88 [73.03mm] 3.35 [85.19mm]

0.81 [20.62mm] 0.25 [6.35mm] 2.88 [73.03mm] 3.38 [85.73mm] 0.25 [6.35mm]

TEKNO
E0600221
Wireway Cover
Typical Use: Provides a hinged cover for the Modu-Tek Wireway (E0600121). Features: Unique profile snaps onto the wireway extrusion providing a hinged cover along the entire length of the wireway without the use of fasteners. The wireway extrusion is symmetrical, allowing the piece to be attached as either a right hand or left hand cover. Profile design allows the cover to hinge open 10 beyond the vertical position to provide easy access for wiring. Easy lift-off profile allows the cover to be removed. Material: 6063-T6 Aluminum Alloy with a 201-R1 Clear Anodize Exterior Finish. Cross Sectional Area (A): 0.37 in2 [2.39 cm2] Weight Per Foot: 0.44 lb [0.20 kg] Standard Length: 20 ft [6.1 m] Maximum Length Available: 20 ft [6.1 m] Hardware Required for Attachment to Wireway: None.

8-3
ELECTRICAL COMPONENTS

2.88 [73.03mm] COVER CAN PIVOT TO 10 FROM THE VERTICAL PLANE ON WIREWAYS CYLINDRICAL PROFILE

WIREWAY EXTRUSION

8-4
ELECTRICAL COMPONENTS

TEKNO
H0600121
Wireway Divider
Typical Use: The steel wall divides Wireway (E0600121) into two equal-sized, parallel chambers. Features: Allows separation of electrical wiring and pneumatic air lines. Can be used to separate wiring to avoid electrical noise interference that can occur when these wires run together for long distances. Material: Mild Steel Weight Per Foot: 0.62 lb [0.28 kg] Hardware Recommended for Assembly to Center of Wireway Extrusion Trough: 1 Double-sided Industrial Foam Tape (VHB4941), cut to length of Wireway Divider.

0.38 [9.52mm]

2.88 [73.03mm]

0.75 [19.05mm]

TEKNO
H0500121
Wireway End Plate
Typical Use: The aluminum plate covers the exposed end of the Modu-Tek Wireway (E0600121). Features: The structural integrity and material composition of the part allows for the tapping of a hole in the center to accept standard conduit fittings. Although the wireway extrusion end can also accommodate the 3 x 3 Slot Plastic End Cap (H0400721), the aluminum Wireway End Plate is the best choice for the secure attachment of conduit fittings. Material: 6063-T6 Aluminum Alloy with a Clear Anodize Finish. Weight: 0.14 lb [0.06 kg] Hardware Recommended for Assembly to Wireway: 1/4 - 20 x 1 Pan Torx Screw Type F Plated (25C100PTFZ), 4 each.

8-5
ELECTRICAL COMPONENTS

3.38 [85.73mm] 2.88 [73.03mm] 0.25 [6.35mm] 0.13 [3.18mm]

.
3.38 [85.73mm]

0.28 [7.11m] (4 PLACES)

8-6
ELECTRICAL COMPONENTS

TEKNO
E0600321
Wireway Junction
Typical Use: Provides a 90 junction at the end of a wireway section for the routing of air and electrical lines between termination points. Features: The symmetrical design of the junction provides an open-style extrusion to facilitate the addition of conduit fitting knockout holes from the inside of the extrusion. Two pieces of the extrusion can be mated together and firmly secured between two Wireway Junction End Plates to form a fully enclosed junction box. Since the Wireway Junction is an extrusion, various lengths can be accommodated to create simple 90 or 45 elbow, T configurations, or junction boxes with terminations from wireway to field devices. Material: 6063-T6 Aluminum Alloy with a 201-R1 Clear Anodize Exterior Finish. Cross Sectional Area (A): 1.32 in2 [8.52 cm2] Weight Per Foot: 1.55 lbs [0.70 kg] Standard Length: 20 ft [6.1 m]
4.67 [118.46mm]

4.67 [118.46mm]

4.00 [101.60mm]

Maximum Length Available: 20 ft [6.1 m] Assembly Notes: The junction extrusion halves slide together end-to-end. The knockout holes require a special tool to create. Please give the length and location of junction knockouts when ordering.

4.00 [101.60mm]

TEKNO
H0500221
Wireway Junction End Plate
Typical Use: This aluminum plate covers the exposed ends of two identical mated Modu-Tek Wireway Junction halves (E0500121). Features: The structural integrity and material composition of the part allows for the tapping of a hole in the center to accept standard conduit fittings. Material: 6061 Aluminum Alloy with a Clear Anodize Exterior Finish. Weight: 0.26 lb [0.12 kg] Hardware Recommended for Assembly to Mated Wireway Junction Extrusions: 1/4 - 20 x 1 Pan Torx ScrewType F Plated (25C100PTFZ), 4 each.

8-7
ELECTRICAL COMPONENTS

4.00 [101.60mm]

0.13 [3.18mm]

0.28 [7.14mm] (3 PLACES) 4.67 [118.49mm]

4.67 [118.49mm]

8-8
ELECTRICAL COMPONENTS

TEKNO
E0600421
45 Wireway Junction Cover
Typical Use: Accommodates 45 wireway runs from the Wireway Junction (E0600321). Features: An indentation mark running the length of the inside of the extrusion facilitates the proper alignment of a knockout punch for the attachment of conduit fittings. The Wireway Junction and cover can be mated and secured firmly in place with the mounting of a 45 Wireway Junction End Plate (EEPPD0600V003) on each end. Material: 6063-T6 Aluminum Alloy with a 201-R1 Clear Anodize Exterior Finish. Cross Sectional Area (A): 1.02 in2 [6.58 cm2] Weight Per Foot: 1.20 lbs [0.54 kg]
45

5.66 [143.69mm]

Standard Length: 20 ft [6.1 m] Maximum Length Available: 20 ft [6.1 m]

1.11 [28.09mm]

1.79 [45.52mm]

Assembly Notes: The Wireway Junction Cover must slide from the end of the Wireway Junction to mate the two parts. The knockout holes require a special tool to create. Please give the length and location of junction knockouts when ordering.

1.79 [45.52mm]

4.67 [118.49mm]

TEKNO
H0500321
45 Wireway Junction End Plate
Typical Use: This aluminum plate covers the exposed ends of the mated Modu-Tek Wireway Junction (E0500121) and 45 Wireway Junction Cover (E060221). Features: The structural integrity and material composition of the part allows for the tapping of a hole in the center to accept standard conduit fittings. Material: 6061 Aluminum Alloy with a Clear Anodize Exterior Finish. Weight: 0.21 lb [0.10 kg] Hardware Recommended for Assembly to Mated Wireway Junction and 45 Wireway Junction Cover Extrusions: 1/4 - 20 x 1 Pan Torx ScrewType F Plated (25C100PTFZ), 3 each.

8-9
ELECTRICAL COMPONENTS

4.67 [118.49mm] 4.00 [101.60mm] 45 0.13 [3.18mm]

0.28 [7.14mm] (3 PLACES)

8-10
ELECTRICAL COMPONENTS

TEKNO
E0500121
Plastic Wireway 1.00 in x 1.50 in [25.40 mm x 38.10 mm]
Typical Use: To neatly contain pneumatic tubes and electrical cables along the length of support structure extrusion T-slots. Features: Flexible snap-in profile fits support structure extrusion T-slots. The flexible hinge and snap-on lid allows easy access to the wireway. Witness lines along the full length of the extrusion allow for accurate positioning of holes for the entry and exit of cables through the sides of the wireway. Material: Black Dual Durometer Polyvinyl Chloride. Weight Per Foot: 0.14 lb [0.06 kg] Hardware or Tools Recommended for Assembly: None.

1.50 [38.10mm] 1.00 [25.40mm]

0.06 [1.60mm]

CLOSED VIEW

OPEN VIEW

PLASTIC WIREWAY ASSEMBLED TO 1 X 1 SUPPORT BEAM

TEKNO
V0201111 3-Hole Junction Box
Typical Use: An enclosure for the mounting and wiring of two electrical components. Features: Allows two electrical components to be mounted at a 45 angle. Mounts to a Wireway extrusion (E0600121) when wireway knockouts are specified. Can also be mounted to a conduit. Materials: Junction Box Extrusions: 6063-T6 Aluminum Alloy with a Clear Anodize Finish. End Plates: 6061 Aluminum Alloy with a Clear Anodize Finish. Button Head Cap Screws: 18-8 Stainless Steel. Weight: 1.25 lbs [0.57 kg] Hardware Included: 1-Hole 45 Wireway Junction Cover (E0600421), 1 each. Wireway Junction (E0600321), 1 each. 45 Wireway Junction End Plates (H0500321), 2 each. 1/4 - 20 x 1 Pan Torx ScrewType F Plated (25C100PTFZ), 8 each. Hardware Recommended for Assembly: None.

8-11
ELECTRICAL COMPONENTS

8-12
ELECTRICAL COMPONENTS

TEKNO
V0200411
1-Hole 45 Junction Box
Typical Use: An enclosure for the mounting and wiring of two electrical components. Features: Allows two electrical components to be mounted at a 45 angle. Mounts to a Wireway extrusion (E0600121) when wireway knockouts are specified. Can also be mounted to a conduit. Materials: Junction Box Extrusions: 6063-T6 Aluminum Alloy with a Clear Anodize Finish. End Plates: 6061 Aluminum Alloy with a Clear Anodize Finish. Button Head Cap Screws: 18-8 Stainless Steel. Weight: 1.25 lbs [0.57 kg] Hardware Included: 1-Hole 45 Wireway Junction Cover (E0600421), 1 each. Wireway Junction (E0600321), 1 each. 45 Wireway Junction End Plates (H0500321), 2 each. 1/4 - 20 x 1 Pan Torx ScrewType F Plated (25C100PTFZ), 8 each. Hardware Recommended for Assembly: None.

TEKNO
V0200511
2-Hole 45 Junction Box
Typical Use: An enclosure for the mounting and wiring of two electrical components. Features: Allows two electrical components to be mounted at a 45 angle. Mounts to a Wireway extrusion (E0600121) when wireway knockouts are specified. Can also be mounted to a conduit. Materials: Junction Box Extrusions: 6063-T6 Aluminum Alloy with a Clear Anodize Finish. End Plates: 6061 Aluminum Alloy with a Clear Anodize Finish. Button Head Cap Screws: 18-8 Stainless Steel. Weight: 1.80 lbs [0.82 kg] Hardware Included: 2-Hole 45 Wireway Junction Cover (E0600421), 1 each. Wireway Junction (E0600321), 1 each. 45 Wireway Junction End Plates (H0500321), 2 each. 1/4 - 20 x 1 Pan Torx ScrewType F Plated (25C100PTFZ), 8 each. Hardware Recommended for Assembly: None.

8-13
ELECTRICAL COMPONENTS

8-14
ELECTRICAL COMPONENTS

TEKNO
V0200611
3-Hole 45 Junction Box
Typical Use: An enclosure for the mounting and wiring of three electrical components. Features: Allows three electrical components to be mounted at a 45 angle. Mounts to a Wireway extrusion (E0600121) when wireway knockouts are specified. Can also be mounted to a conduit. Materials: Junction Box Extrusions: 6063-T6 Aluminum Alloy with a Clear Anodize Finish. End Plates: 6061 Aluminum Alloy with a Clear Anodize Finish. Button Head Cap Screws: 18-8 Stainless Steel. Weight: 2.40 lbs [1.09 kgs] Hardware Included: 3-Hole 45 Wireway Junction Cover (E0600421), 1 each. Wireway Junction (E0600321), 1 each. 45 Wireway Junction End Plates (H0500321), 2 each. 1/4 - 20 x 1 Pan Torx ScrewType F Plated (25C100PTFZ), 8 each. Hardware Recommended for Assembly: None.

TEKNO
V0200711
4-Hole 45 Junction Box
Typical Use: An enclosure for the mounting and wiring of three electrical components. Features: Allows three electrical components to be mounted at a 45 angle. Mounts to a Wireway extrusion (E0600121) when wireway knockouts are specified. Can also be mounted to a conduit. Materials: Junction Box Extrusions: 6063-T6 Aluminum Alloy with a Clear Anodize Finish. End Plates: 6061 Aluminum Alloy with a Clear Anodize Finish. Button Head Cap Screws: 18-8 Stainless Steel. Weight: 3.00 lbs [1.36 kgs] Hardware Included: 4-Hole 45 Wireway Junction Cover (E0600421), 1 each. Wireway Junction (E0600321), 1 each. 45 Wireway Junction End Plates (H0500321), 2 each. 1/4 - 20 x 1 Pan Torx ScrewType F Plated (25C100PTFZ), 8 each. Hardware Recommended for Assembly: None.

8-15
ELECTRICAL COMPONENTS

8-16
ELECTRICAL COMPONENTS

TEKNO
V0200811
5-Hole 45 Junction Box
Typical Use: An enclosure for the mounting and wiring of three electrical components. Features: Allows three electrical components to be mounted at a 45 angle. Mounts to a Wireway extrusion (E0600121) when wireway knockouts are specified. Can also be mounted to a conduit. Materials: Junction Box Extrusions: 6063-T6 Aluminum Alloy with a Clear Anodize Finish. End Plates: 6061 Aluminum Alloy with a Clear Anodize Finish. Button Head Cap Screws: 18-8 Stainless Steel. Weight: 3.60 lbs [1.63 kgs] Hardware Included: 5-Hole 45 Wireway Junction Cover (E0600421), 1 each. Wireway Junction (E0600321), 1 each. 45 Wireway Junction End Plates (H0500321), 2 each. 1/4 - 20 x 1 Pan Torx ScrewType F Plated (25C100PTFZ), 8 each. Hardware Recommended for Assembly: None.

TEKNO
V0200911
6-Hole 45 Junction Box
Typical Use: An enclosure for the mounting and wiring of three electrical components. Features: Allows three electrical components to be mounted at a 45 angle. Mounts to a Wireway extrusion (E0600121) when wireway knockouts are specified. Can also be mounted to a conduit. Materials: Junction Box Extrusions: 6063-T6 Aluminum Alloy with a Clear Anodize Finish. End Plates: 6061 Aluminum Alloy with a Clear Anodize Finish. Button Head Cap Screws: 18-8 Stainless Steel. Weight: 4.00 lbs [1.81 kgs] Hardware Included: 6-Hole 45 Wireway Junction Cover (E0600421), 1 each. Wireway Junction (E0600321), 1 each. 45 Wireway Junction End Plates (H0500321), 2 each. 1/4 - 20 x 1 Pan Torx ScrewType F Plated (25C100PTFZ), 8 each. Hardware Recommended for Assembly: None.

8-17
ELECTRICAL COMPONENTS

TEKNO
Stair Tread and Walkovers
Teknos Modu-Tek line also allows you to design and build completely modular stair treads and walkovers for your application. Built of the highest quality extruded anodized aluminum, these structures provide lightweight, yet ultra sturdy platforms and staircases. Our tread plate material is designed with a premium on safety; all of our tread plates feature raised rows of teeth for extra traction. We also offer vented tread plate that allows dirt and other accumulates to fall freely through the plate, virtually eliminating the risk of slippage. As is the case with any Modu-Tek product, these structures posess incredible versatility and are easily configured/reconfigured for any application; no drilling or tapping required! Call us today for further information on our Modu-Tek Walkovers and Stair Treads!

This Page Intentionally Left Blank

TEKNO
T-Slot Covers Panel Clamp

9-1
ACCESSORIES

2-Panel Door Slide T-Slot Inserts

T- Slot Cover, Safety T-Slot Cover, Black Yellow E0500321 E0500221 Page 9-4 Page 9-4

Panel Clamp T-Slot Insert E0500521 Page 9-5

2 - Panel Door Slide, Top E0500721 Page 9-6

2 - Panel Door Slide, Bottom E0500721 Page 9-7

Panels

Clear Polycarbonate Panel H0700121 Page 9-8

Expanded Metal Mesh Panel H0700221 Page 9-8

1/2 x 1/2 Black PlasticCoated 16 Guage Wire Mesh Panel H0700321 Page 9-9

1 x 1 Black PlasticCoated 12 Guage Wire Mesh Panel H0700421 Page 9-9

Panel Retainers

Panel Retainer Strips

Panel Retainer for Mesh Panels H0700521 Page 9-10

Panel Retainer for Plastic Panels H0700621 Page 9-11

Panel Retainer Strip E0500821 Page 9-12

Double Panel Retainer Strip E0500921 Page 9-13

Corne
Flat Panel Retainer Strip E0501021 Page 9-14

9-2
ACCESSORIES

TEKNO
Guide Wheel

Corner Finishing Cap

Corner Finishing Cap H0400821 Page 9-15

Guide Wheel H0801121 Page 9-16

Plastic Door Handles

Plastic Door Handle for Panels H0800711 Page 9-17

Plastic Door Handle for Extrusion T-Slots H0800221 Page 9-18

Nylon Door Hinges

Door Hinge H0800521 Page 9-19

Adjustable Door Hinge H0800621 Page 9-20

Lift-Off Door Hinge, Left Hand H0800521 Page 9-21

Lift-Off Door Hinge, Right Hand H0800811 Page 9-22

Metal Handle Assemblies

Magnetic Catch Assemblies

Metal Handle Assembly, Non-Locking H0800411 Page 9-23

Metal Handle Assembly,Locking H0800311 Page 9-24

Magnetic Catch Assembly, H0800911 Page 9-25

Magnetic Catch Assembly, for Tri-Slot Support Beam H0801011 Page 9-26

TEKNO
Corner Extrusion Covered Roller

9-3
ACCESSORIES

Corner Extrusion E0502021 Page 9-27

Covered Roller H0301921 Page 9-27

1x1 End Brackets

1x1 End Bracket B0700521 Page 9-28

1x1End Bracket Swivel B0700511 Page 9-28

Tool Trolley

Tool Trolley Assembly H1300311 Page 9-29

Cam Roller H1300211 Page 9-29

9-4
ACCESSORIES

TEKNO
E0500221
T-Slot Cover, Safety Yellow

E0500321
T-Slot Cover, Black
Typical Use: To cover T-slots. To hold cables and piping in position. Features: Flexible snap-in profile. No hardware or special tools required to insert into beam extrusions. Material: Rigid Polyvinyl Chloride Extrusion Weight Per Foot: 0.02 lb [0.01 kg] Standard Length Available: 16.0 ft [4.9 m] Maximum Length Available: 16.0 ft [4.9 m] Hardware or Tools Required For Assembly: None: installs by pressing into a standard T-slot of any Modu-Tek extrusion.

.
0.19 [4.70mm]

INSTALLED IN T-SLOT

0.47 [11.99mm]

TEKNO
E0500521
Panel Clamp T-Slot Insert
Typical Use: To secure 7/32 stationary polycarbonate panels in place within extrusion T-Slots for guarding and enclosures. Features: Flexible profile accepts various widths of polycarbonate sheeting. No hardware required for assembly. Material: Black Rigid Polyvinyl Chloride Extrusion Weight Per Foot: 0.04 lb [0.02 kg] Standard Length Available: 16.0 ft [4.9 m] Maximum Length Available: 16.0 ft [4.9 m] Hardware or Tools Required For Assembly: None. Assembly Note: Panels must be inserted before the completion of a closed assembly frame. The Panel T-Slot Clamp installs onto the polycarbonate sheet by pressing the open cavity of the PVC extrusion onto the edge of the panel, while the mated polycarbonate panel and clamp installs by pressing into the T-Slot of a support beam extrusion. A rubber mallet can be used to tap the extrusion onto the edge of the polycarbonate panel.

9-5
ACCESSORIES

9-6
ACCESSORIES

TEKNO
E0500621
2-Panel Door Slide, Top
Typical Use: Holds the tops of two sliding panels in place between two parallel beams. Features: Flexible snap-in profile. No hardware or special tools required to insert into beam extrusions. Panels can be inserted after frame assembly. Material: Black Rigid Polyvinyl Chloride Extrusion Weight Per Foot: 0.21 lb [0.09 kg] Standard Length Available: 16.0 ft [4.9 m] Maximum Length Available: 16.0 ft [4.9 m] Hardware or Tools Required For Assembly: None. Assembly Note: Installs by pressing into T-slot. The sliding panel height appropriate for a given space between two parallel beams can be derived by subtracting 0.81 in [20.57 mm] from the distance between the bottom edge surface of the top beam and the top edge of the lower beam.

TEKNO
E0500721
2-Panel Door Slide, Bottom
Typical Use: Holds the bottoms of two sliding panels in place between two parallel beams. Features: Flexible snap-in profile. No hardware or special tools required to insert into beam extrusions. Panels can be inserted after frame assembly. Material: Black Rigid Polyvinyl Chloride Extrusion Weight Per Foot: 0.17 lb [0.08 kg] Standard Length Available: 16.0 ft [4.9 m] Maximum Length Available: 16.0 ft [4.9 m] Hardware or Tools Required For Assembly: None. Assembly Note: Installs by pressing into T-slot. The sliding panel height appropriate for a given space between two parallel beams can be derived by subtracting 0.81 in [20.57 mm] from the distance between the bottom edge surface of the top beam and the top edge of the lower beam.

9-7
ACCESSORIES

9-8
ACCESSORIES

TEKNO
H0700121
Clear Polycarbonate Panel
Typical Use: For guarding enclosure applications with all Modu-Tek extrusions. Features: High Impact strength and durablilty, 0.22in [5.59mm] thick. Weight Per Square Foot: 1.50 lb [0.7 kg] Standard / Maximum Size: 4.0 ft x 8.0 ft [1.2 m x 2.4 m] sheet Custom Sizes: Cut sizes smaller than standard are available.

H0700221
Expanded Metal Mesh Panel
Typical Use: For guarding enclosure applications with all Modu-Tek extrusions. Features: 1.680 in x 0.563 in [42.672 mm x 14.300 mm] openings. Material: 0.75 in [19.05 mm] #9 Flattened 0.13 in [3.30 mm] Thick Powder Coated Yellow Carbon Steel Weight Per Square Foot: 1.75 lbs [0.79 kg] Standard / Maximum Size: 4.0 ft x 8.0 ft [1.2 m x 2.4 m] sheet

TEKNO
H0700321
1/2 x 1/2 Black Plastic-Coated 16 Guage Wire Mesh Panel
Typical Use: For guarding enclosure applications with all Modu-Tek extrusions. Features: 0.50 [12.70mm] Square openings. Weight Per Square Foot: 0.50 lb [0.23 kg] Standard / Maximum Size: 4.0 ft x 8.0 ft [1.2 m x 2.4 m] sheet Custom Sizes: Cut sizes smaller than standard are available.

9-9
ACCESSORIES

H0700421
1 x 1 Black Plastic-Coated 12 Guage Wire Mesh Panel
Typical Use: For guarding enclosure applications with all Modu-Tek extrusions. Features: 1.00 [25.40mm] Square openings. Weight Per Square Foot: 1.00 lb [0.45 kg] Standard / Maximum Size: 4.0 ft x 8.0 ft [1.2 m x 2.4 m] sheet Custom Sizes: Cut sizes smaller than standard are available.

9-10
ACCESSORIES

TEKNO
H0700521
Panel Retainer for Mesh Panel
Typical Use: To attach expanded metal panel to support beam extrusions in guarding enclosures. Features: Attaches to all support beams with standard fastener hardware. The retainer allows the expanded metal to be seated into the T-slot, providing a completely enclosed guard. Material: 1/8 Thick Mild Seel, Zinc Plated. Weight: 0.28 lb [0.13 kg] Hardware or Tools Required For Assembly: To Support Beam: 5/16 - 18 x 3/4 T-Bolts (H0100121), 2 each. 5/16 Flat Washers (68N34WSDZ/089), 2 each. 5/16 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 2 each. To Mesh Panel: 5/16 - 18 x 5/8 Hex Head Cap Screws (31C62HCS5Z), 2 each. 5/16 Lock Washers (31NLOCZ), 2 each. 2-Hole Strap Nut (B0600121), 1 each. Assembly Note: This panel retainer is not compatible with the Tri-Slot Support Beam (E0100101).

0.84 [21.34mm]

3.34 [84.94mm]

1.44 [36.58mm]

0.34 [8.64mm] 0.63 [15.95mm]

0.59 [14.99mm]

1.75 [44.45mm] 2.50 [63.50mm]

TEKNO
H0700721
Panel Retainer for Plastic Panel
Typical Use: To attach polycarbonate sheeting to support beam extrusions in guarding enclosures. Features: Attaches to all support beams with standard fastener hardware. The retainer allows a polycarbonate sheet to be firmly seated and secured into the Tslot, providing a completely enclosed guard. Material: 1/8 Thick Mild Steel, Zinc Plated. Weight: 0.14 lb [0.07 kg] Hardware or Tools Required For Assembly: To Support Beam: 5/16 - 18 x 3/4 T-bolt (H0100121), 1 each. 5/16 Flat Washer (68N34WSDZ/089), 1 each. 5/16 Nylon Insert Thin Height Lock Nut (31CNTEZ), 1 each. To Polycarbonate Panel: 5/16 - 18 x 3/4 Hex Head Cap Screw (31C75HCS5Z), 1 each. 5/16 Flat Washer (68N34WSDZ/089), 1 each. 5/16 Nylon Insert Thin Height Lock Nut (31CNTEZ), 1 each. Assembly Note: This panel retainer is not compatible with the Tri-Slot Support Beam (E0100101).

9-11
ACCESSORIES

9-12
ACCESSORIES

TEKNO
E0500821
Panel Retainer Strip
Typical Use: To secure 7/32 [5.56 mm] polycarbonate paneling to T-slotted frame structures in guarding applications. Features: Flexible snap-in profile. No hardware or special tools required to insert into beam extrusions. Material: Black Rigid Polyvinyl Chloride Extrusion Weight Per Foot: 0.06 lb [0.03 kg] Maximum Length Available: 16.0 ft [4.9 m] Hardware or Tools Required For Assembly: A special installation tool is recommended and available upon request.

TEKNO
E0500921
Double Panel Retainer Strip
Typical Use: To secure 7/32 [5.56 mm] polycarbonate paneling to T-slotted frame structures in guarding applications. Secures paneling to both sides of the T-slot. Features: Flexible snap-in profile. No hardware or special tools required to insert into beam extrusions. Reduces the amount of T-slotted beam required to complete a structure. Material: Black Rigid Polyvinyl Chloride Extrusion Weight Per Foot: 0.10 lb [0.04 kg] Maximum Length Available: 16.0 ft [4.9 m] Hardware or Tools Required For Assembly: A special installation tool is recommended and available upon request.

9-13
ACCESSORIES

9-14
ACCESSORIES

TEKNO
E0501021
Flat Panel Retainer Strip
Typical Use: To secure 7/32 [5.56 mm] polycarbonate paneling to the flat-surfaced framing structures, such as tubing, in guarding applications. Features: Flexible profile. Material: Black Rigid Polyvinyl Chloride Extrusion Weight Per Foot: 0.06 lb [0.02 kg] Maximum Length Available: 16.0 ft [4.9 m] Hardware Recommended For Assembly: 1/4 - 20 x 3/8 Socket Head Cap Screws (25C37KCSS), quantity as needed per job.

TEKNO
H0400821
Corner Finishing Cap
Typical Use: To provide a finished look to individual 90 corners where Panel Retainer Strip, E0500821, is used. Features: The Cap covers the exposed ends of the Panel Retainer Strips, thereby, preventing them from being pulled away from the beam slot. Material: Black Nylon. Weight: 0.03 lb. [0.01 kg.] Hardware Recommended For Assembly: 1/4 - 20 x 7/8 Button Head Cap Screw (25C87KBC), 1 each. Double Square Nut (H0100721), 1 each.

9-15
ACCESSORIES

9-16
ACCESSORIES

TEKNO
H0801121
Guide Wheel
Typical Use: As rollers to create panels that slide along the standard Modu-Tek T-slotted extrusion. Material: Polyamide Weight: 0.26 lb. [0.12 kg.] Hardware Recommended For Assembly: 5/16 x 5/8 Shoulder Bolt (31N62KSS), 1 each. 5/16 Flat Washer (68N34WSDZ/089), 1 each. Double Square Nut (H0100721), 1 each.

TEKNO
H0800121
Plastic Door Handle for Panels
Typical Use: To be mounted as a handle to sliding panels, doors, and access hatches. Features: Lightweight and sturdy. 1/4 - 20 inserts accept standard screws for attachment to surfaces. Material: Polypropylene-Copolymer Weight: 0.08 lb [0.03 kg] Hardware Recommended For Assembly: 1/4 - 20 x 1/2 Flat Head Cap Screws (25C50KFCS), 2 each. Assembly Note: Panel holes must be drilled and countersunk to use handle with Flat Head Cap Screws.

9-17
ACCESSORIES

9-18
ACCESSORIES

TEKNO
H0800221
Plastic Door Handle for Extrusion T-Slots
Typical Use: To be mounted as a handle to extrusion Tslots. Features: Lightweight and sturdy. 1/4 - 20 inserts accept standard screws for attachment to extrusions. Material: Thermoplastic, Glass Fiber Reinforced Weight: 0.09 lb [0.04 kg] Hardware Recommended For Assembly: 1/4 - 20 x 5/8 Socket Head Cap Screws (25C62KCSS), 2 each. Double Square Nuts (H0100721), 2 each. 5/16 - 18 x 5/16 Socket Set Screws with Cup Points (31C31KKCS), 2 each. Required in lieu of above listed 5/8 Socket Head Cap Screws (25C62KCSS) when mounting to the Tri-Slot Support Beam (H0800221): 1/4 - 20 x 1/2 Socket Head Cap Screws (25C50KCSS), 4 each.
0.25 [6.35mm] THROUGH, 0.41 [10.41mm] X 0.35 [8.89mm] DEEP

1.02 [25.91mm]

1.61 [40.89mm]

1.34 [34.04mm]

0.24 [6.10mm]

3.75 [95.30mm] 4.61 [117.14mm] 5.47 [138.99mm]

TEKNO
H0800521
Door Hinge
Typical Use: Hinge for doors and swing-out or pivoting structures. Features: Mounts directly to extrusion T-slots. Material: Leaves: Reinforced Polyamide. Hinge Pin: AISI 304 Stainless Steel Weight: 0.26 lb [0.12 kg] Hardware Recommended For Assembly: 1/4 - 20 x 1/2 Socket Head Cap Screws (25C50KCSS), 4 each. Double Square Nuts (H0100721), 4 each. 5/16 - 18 x 5/16 Socket Set Screws (31C31KKCS), 4 each. Assembly Note: This door hinge provides a wider gap between extrusions than the lift off hinges (H0800711 and H0800811).

9-19
ACCESSORIES

9-20
ACCESSORIES

TEKNO
H0800621
Adjustable Door Hinge
Typical Use: Hinge for doors, panels, and swing-out or pivoting structures. Features: Mounts directly to extrusion T-slots. Provides either free or dampened door swing motion. Assists in holding door open, closed, or partially open. Materials: Leaves: Black Acetal. Hinge Pin: Clear Polycarbonate. Adjusting Screw and Nut: 303 Stainless Steel. Weight: 0.10 lb [0.05 kg] Hardware Recommended For Assembly: For attachment to T-Slot: 1/4 - 20 Thin Spring Strut Nuts (/G1534), 2 each. 1/4 - 20 x 1/2 Socket Head Cap Screws (25C50KCSS), 2 each. For attachment to polycarbonate sheet (H0700121) with drilled and tapped holes: 1/4 - 20 x 1/2 Socket Head Cap Screws (25C50KCSS), 2 each. For attachment to Tri-Slot Support Beam: 1/4 - 20 x 3/8 Socket Head Cap Screws (25C37KCSS), 2 each. Assembly Note: For attachment of this hinge to Tri-Slot Support Beams (H0800221), drill and tap two 1/4 - 20 x 1/4 deep holes into center of solid side of extrusion on 1.88 [47.75mm] centers.

TEKNO
H0800711
Lift-off Door Hinge, Left Hand
Typical Use: Hinge for doors and swing-out or pivoting structures. Features: Attached door can be lifted off of its hinge. Material: Glass-filled Nylon Weight: 0.38 lb [0.17 kg] Hardware Recommended For Assembly: 3/4 T-Bolts (H0100121), 4 each. 5/16 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 4 each. 5/16 Flat Washers (68N34WSDZ/089), 4 each.

9-21
ACCESSORIES

3.00 [76.20mm] 0.88 [22.23mm]

1.28 [32.56mm]

1.22 [30.96mm]

0.81 [20.62mm]

2.50 [63.50mm]

0.88 [22.23mm] 5.00 [127.00mm] 0.81 [20.62mm]

0.34 [8.64mm]

0.88 [22.23mm] 1.50 [38.10mm]

9-22
ACCESSORIES

TEKNO
H0800811
Lift-off Door Hinge, Right Hand
Typical Use: Hinge for doors and swing-out or pivoting structures. Features: Attached door can be lifted off of its hinge. Material: Glass-filled Nylon Weight: 0.38 lb [0.17 kg] Hardware Recommended For Assembly: 3/4 T-Bolts (H0100121), 4 each. 5/16 Nylon Insert Thin Height Lock Nuts (31CNTEZ), 4 each. 5/16 Flat Washers (68N34WSDZ/089), 4 each.

0.88 [22.23mm]

.
1.28 [32.56mm] 1.22 [30.96mm]

3.00 [76.20mm] 0.88 [22.23mm] 0.81 [20.62mm]

0.88 [22.23mm]

0.81 [20.62mm]

5.00 [127.00mm]

2.50 [63.50mm]

0.34 [8.64mm] 1.50 [38.10mm]

TEKNO
H0800411
Handle Assembly, Non-locking
Typical Use: To latch doors on cabinets and guarding. Features: Corrosion-resistant chrome finish. 360 turn for right hand or left hand use. Material: Bright Chrome, Zinc Die Cast. Weight: 0.63 lb [0.28 kg] Hardware Included with Assembly: Handle (H0800411), 1 each. 10 - 32 Spring Nuts (/G1532), 2 each. 10 - 32 x 1/2 Flat Head Cap Screws (10F50KFCS), 2 each. Nylon Washer (90295A185), 1 each. Cam (H0800411), 1 each. Hardware Recommended for Assembly: None.

9-23
ACCESSORIES

9-24
ACCESSORIES

TEKNO
H0800311
Handle Assembly, Locking
Typical Use: To latch and lock doors on cabinets and guarding. Features: Corrosion-resistant chrome finish. 360 turn for right hand or left hand use. Keyed lock for security. Material: Bright Chrome, Zinc Die Cast. Weight: 0.63 lb [0.28 kg] Hardware Included with Assembly: Handle (H0800411), 1 each. 10 - 32 Spring Nuts (/G1532), 2 each. 10 - 32 x 1/2 Flat Head Cap Screws (10F50KFCS), 2 each. Nylon Washer (90295A185), 1 each. Cam (H0800411), 1 each. Two working keys. Hardware Recommended for Assembly: None.

TEKNO
H0800911
Magnetic Catch Assembly
Typical Use: To latch panels in place. Features: Compact and rugged. Self-aligning magnets assure full contact and maximum holding power. Ten pounds of pull required to break contact between surfaces. Material: Body: Plastic. Magnetic Poles & Striker Plate: Steel. Weight: 0.08 lb [0.04 kg] Hardware Included with Assembly: Magnet and Striker Plate Set (H0850721), 1 each. 10 - 32 Spring Nuts (/G1532), 2 each. 10 - 32 x 1/2 Socket Head Cap Screws (10F50KCSS), 2 each. #6 x 1/4 Self-tapping Screw (6N25TXFZ), 1 each. Hardware Recommended for Assembly: None. Note: To use a magnetic catch assembly with a frame built from Tri-Slot Beam extrusions, refer to the Magnetic Catch Assembly for TriSlot Beam (H0801011) on the next page.

9-25
ACCESSORIES

9-26
ACCESSORIES

TEKNO
H0801011
Magnetic Catch Assembly for TriSlot Support Beam
Typical Use: To latch panels in place when the Tri-Slot Support Beam is used in a vertical position as shown in the typical installation illustration at right. Note: The standard Magnetic Catch Assembly (H0800911) can be used with the Tri-Slot Support Beam if the catch is mounted on the long side of the beam. Features: Compact and rugged. Self-aligning magnets assure full contact and maximum holding power. Ten pounds of pull required to break contact between surfaces. Material: Body: Plastic. Magnetic Poles & Striker Plate: Steel. Mounting Plate: Aluminum. Weight: 0.18 lb [0.08 kg] Hardware Included with Assembly: Magnet and Striker Plate Set (H0850721), 1 each. 10 - 32 Spring Nuts (/G1532), 2 each. 10 - 32 x 3/8 Flat Head Cap Screws (10F37KFC), 2 each. #6 x 1/4 Self-tapping Screw (6N25TXFZ), 1 each. 10 - 32 x 1/4 Socket Head Cap Screws (10F25KFCS), 2 each. Mounting Angle Bracket (B0100821), 1 each. Hardware Recommended for Assembly: None.

TEKNO
H0301921
Covered Roller
Typical Use: Cover Roller used on the Assembly of a Pallet . Features: Excepts 3/8 and 10mm Flat Head Screw Material: Urethane,Sealed/Permanet Lubricated Sealed Ball Bearing

9-27
ACCESSORIES

Weight:

Hardware Recommended For Assembly: 1/2-13 x 7/8 Flat Head Cap Screw(1 each)

E0502021
Corner Extrusion
pical Use: Slide surface, Guide rail Features: Slide on corner of any support beam Material: High Density Polyethylene (UHMW) Weight:

9-28
ACCESSORIES

TEKNO
B0700521 1x1 End Bracket
Typical Use: Features: Can attach to 1x1 Beam with self tapping torx screws. Can attach by using a 3/4 x 7/8 T-Bolt Can be used as rollers by attaching a covered roller to it (H0301921). Material: Die Cast Zinc

Weight:

Hardware Recommended For Assembly: 1/4 - 20 x 1 Torx Screw 3/4 x 7/8 T-Bolt 1/2-13 x 7/8 Flat Head Cap Screw

B0700511 1x1 End Bracket Swivel Assembly


Features: Can attach to 1x1 Beam with self tapping torx screws. Can attach by using a 3/4 x 7/8 T-Bolt Material: Die Cast Zinc Weight:

Hardware Recommended For Assembly: 1/4 - 20 x 1 Torx Screw 3/4 x 7/8 T-Bolt

TEKNO
H1300311 Tool Trolley Assembly
Typical Use Features: Mounting Over of tool balancers Fixtures that need to move Material: Steel

9-29
ACCESSORIES

Weight:

Hardware Recommended For Assembly: 8 cam rollers (H1300211) 8 Jam nuts

H1300211 Cam Roller


Material: Hardened Steel Sealed/Permanet Ball Bearing Lubrication

Weight:

TEKNO
Stair Tread and Walkovers
Teknos Modu-Tek line also allows you to design and build completely modular stair treads and walkovers for your application. Built of the highest quality extruded anodized aluminum, these structures provide lightweight, yet ultra sturdy platforms and staircases. Our tread plate material is designed with a premium on safety; all of our tread plates feature raised rows of teeth for extra traction. We also offer vented tread plate that allows dirt and other accumulates to fall freely through the plate, virtually eliminating the risk of slippage. As is the case with any Modu-Tek product, these structures posess incredible versatility and are easily configured/reconfigured for any application; no drilling or tapping required! Call us today for further information on our Modu-Tek Walkovers and Stair Treads!

This Page Intentionally Left Blank

TEKNO

10-1 ADDITIONAL PRODUCTS & SERVICES


Stair Tread and Walkovers
Teknos Modu-Tek line also allows you to design and build completely modular stair treads and walkovers for your application. Built of the highest quality extruded anodized aluminum, these structures provide lightweight, yet ultra sturdy platforms and staircases. Our tread plate material is designed with a premium on safety; all of our tread plates feature raised rows of teeth for extra traction. We also offer vented tread plate that allows dirt and other accumulates to fall freely through the plate, virtually eliminating the risk of slippage. As is the case with any Modu-Tek product, these structures posess incredible versatility and are easily configured/reconfigured for any application; no drilling or tapping required! Call us today for further information on our Modu-Tek Walkovers and Stair Treads!

10-2 ADDITIONAL PRODUCTS & SERVICES

TEKNO

FlowRacks/Gravity Racks

Looking for innovative material handling solutions? Modu-Tek by Tekno signals the end of your search! Our vast array of extrusions and brackets have lended themselves wonderfully to the creation of flow racks and gravity racks. These structures provide functionality and durability that goes above and beyond anything else in the industry. With a framework constructed of our heavy duty hard-anodized aluminum extrusion, these racks are sturdy enough to handle virtually any load, yet light enough to move and/or reconfigure at a moments notice.

As with any Modu-tek structure, our skilled professionals can design and build a flow rack/gravity rack to meet your specific needs. Or you may prefer to have it shipped to you in kit form, and using three simple hand tools, assemble it yourself in minutes with no drilling/tapping required! Regardless of the application, Tekno has the solution to meet your needs. Call us today!

TEKNO

10-3 ADDITIONAL PRODUCTS & SERVICES


Systems Integration
Tekno Offers Turn-Key Manufacturing & Material Handling Systems Integration Services:
Tekno provides systems integration services to clients for projects large and small. With over 15 years of experience in mainstream industry, both domestically and internationally, we have the proven know-how, expertise, and product familiarity to make your automated production systems a success. With internal design, assembly, machining, control panel configuration, and programming capabilities, Tekno offers a breadth and depth of services worthy of the worlds finest manufacturing facilities.

GEMINI Conveyor Systems


Use Teknos own Gemini Non-synchronous Conveyor System for Palletized Product Assembly & Conveyance:
Tekno is an Original Equipment Designer and Manufacturer of a world class line of modular non-synchronous conveyor components. Gemini conveyors can handle a wide variety of product and carrier types, loads, sizes, and conveyance speeds. Gemini conveyors are extremely flexible in application, and theyre re-configurable when production requirements change. Hundreds of automated conveyance, assembly, and processing systems built from the wellestablished Gemini System product line have been fielded across North America and beyond.

Custom Control Panels


Tekno has Internal Control Panel Design, Sourcing, Building, Programming, and Installation Capabilities:
Tekno designs and builds custom control panels, operator interface terminals, industrial computer enclosures, and factory communications networks to customer specifications. All design work is performed by qualified engineers and technicians on AutoCAD workstations for convenient client modification and approval. Teknos in-house fabrication and assembly capability can provide enclosures, panel inserts, touch screens, and data collection / charting / display equipment of many styles and brands. Using the latest in design techniques, materials, fabrication equipment, and third-party hardware and software, Teknos engineers and technicians can deliver the custom controls support you need for your unique production and materials handling operations.

10-4 ADDITIONAL PRODUCTS & SERVICES

TEKNO
Custom Product Pallets

Check Out Teknos Own Internal Custom Pallet Design, Fabrication, and Build Capabilities: Tekno can design and build product carriers of almost any size, shape, and composition, to very close toleracnes. Teknos in -house fabrication, machining, and assembly capability can provide special fixtures, pallet electrification equipment, multiple-model corner and prodcut support blocks, pallet-to-station locking methods, status flag, in -line product burn-in and testing features, corner rollers, UHMW-PE glide edging, stopper cutouts, and raised aluminum pedestals, Send your custom applications our way.

TEKNO
Special Machinery
Teknos Skilled Engineers & Technicians Can Design, Fabricate, Build, and Install Special Machinery to Meet Your Needs: Teknos engineering, machining, fabrication, assembly, and documentation departments provide a wealth of capabilities in the creation and application of custom machinery. With specialists in conveyance, part fixturing, material flow, heat treatment, furnaces and ovens, vertical product lifts, brazing technology, manufacturing processes, in-line gauging, product inspection and testing, automation programming and robotic applications, Tekno can handle many types of special equipment projects. Special machinery is pre-built in our facility, then tested, de-bugged, and run off for the customer prior to shipment and installation of the equipment. To help your operators and maintenance technicians better understand and care for your new machinery, Tekno also offers various levels of custom documentation and training packages.

10-5 ADDITIONAL PRODUCTS & SERVICES

TEKNO
Notes:

You might also like