Professional Documents
Culture Documents
The control relays eay500/700/800 and the multifunction display MFD Titan offer all the technical possibilities needed to realize applications in industrial and manual applications as well as in machinery or apparatus construction.
eay500 Functions such as multifunction relays, current pulse switches, counters, analog value comparators, week and year time switches +++ Stand-alone device +++ Optimal for smaller applications +++ Connectable to Ethernet
eay700 Complete functional scope of an eay500 +++ Local and remote extension options for flexible applications +++ Connectable to current bus systems or Ethernet eay800 Complete functional scope of an eay700 +++ Numerous additional functions such as PID controller, arithmetic functions, value scaling, fast counter (5kHz) +++ To perform comprehensive control tasks +++ Digital and analog expandability +++ Integrated communication through eayNet +++ Connectable to current bus systems or Ethernet
MFD-Titan Combines control function of an eay800 with convenient visualization +++ Display, control, regulation and communication with one device +++ E/A modules for direct temperature sensing +++ Digital and analog expandability +++ Communication through eayNet possible +++ Connectable to current bus systems or Ethernet
2010 CA08103002Z-EN www.eaton.com
Control relay eay Technical overview Control relay, multi-function display System overview Control relays eay500, eay700 Ordering Basic devices eay500 eay700 Expansion Devices I/O expansions Coupling module Bus modules Ethernet gateway Accessories System overview Control relay eay800 Ordering Basic devices eay800 Expansion Devices I/O expansions Coupling module Bus modules Ethernet gateway Accessories 12/15 12/15 12/16 12/16 12/16 12/14 12/12 12/8 12/8 12/8 12/8 12/9 12/6 12/7 12/4 12/3
MFD-Titan Multi-function display System overview MFD-Titan Multifunctiondisplay Ordering Display/keypad Power supply unit/CPU module Power supply unit/communication module Input/output modules Expansion Devices I/O expansions Coupling module Bus modules Ethernet gateway Accessories 12/25 12/25 12/26 12/26 12/27 12/22 12/22 12/23 12/24 12/20
Control relay, multi-function display Technical data Basic devices, Expansion Devices eay... eay...DA... eayAB... eay...DC... eayAC... Input/output modules Basic devices, Expansion Devices Transistor outputs Relay outputs Bus modules Ethernet coupling unit, upstream device Switched-mode power supply units Dimensions
16.25 75 M4 16.25
12/30 12/31 12/32 12/33 12/35 12/39 12/42 12/44 12/45 12/47 12/49
107.5
102
110
90
45
12/2
Notes
2010 CA08103002Z-EN
www.eaton.com
12/3
Technical overview
Functions
Counter functions
Technical overview
easy500/700
16 (0 to 32000)
easy800
32 ( g231)
MFD-...CP8...
32 ( g231)
Counter relay (up, down counting) Frequency counters High-Speed counter Incremental counters Hour meter Weekly timer (4 channels per timer, each channel offers one On/Off time) Year time switch Set cycle time Timing relay Jump Conditional jump Master reset
2 (max. 1 kHz) 4 (max. 5 kHz) 4 (max. 3 kHz) 2 (max. 1 kHz) 4 (max. 5 kHz) 4 (max. 3 kHz) 2 (max. 3 kHz) 2 (max. 3 kHz) 4 (operating hours value is stored super-retentively (e.g also with program change) 8 8 16 (0.01 s 99 h 59 min) 8 3 32 32
Time functions
32 1 1 32 (0.005 s 2 min), On-delayed and/or off-delayed (optionally random switching), pulse shaping, flashing 32 32 32 32 32 32
Maths functions
Analog value comparator Arithmetic PID controller PT1 signal smoothing filter Value scaling Numerical converter Pulse output Pulse width modulation Value limit
16 16 16 x (4 x 12 characters)
Memory functions
Block comparison Block transfer Boolean operation Comparator Data function block Data multiplexer Shift register Table function
Communication functions
Get value from the NET Put value on the NET Bit output via NET Bit input via NET Diagnostic alarm Serial protocol Synchronize clock via NET Text display (can be edited via software) Static text Message text Screen menu Running text Rolling text Date and time information Year time switch entry Latching pushbutton Button field Timing relay value entry Value entry Week clock input Enter counter value/reference value/OT Bit display Message bitmap Bargraph Numerical value Timing relay value display Actual values Date and time
Text functions
Yes
Yes
Yes
Yes
Yes Yes
Yes Yes
Yes Yes
2010 CA08103002Z-EN
www.eaton.com
12/4
500, 700
Control relays
500, 700
System overview
3 4 3
2 5 2
POW
BUS
POWER COM-ERR
ERR MS
ADR
NS
11 10 12
11
10
2010 CA08103002Z-EN
www.eaton.com
Control relays
500, 700
Basic devices 500
Stand-alone 12 V DC = easy...DA... 24 V DC = easy...DC... 24 V AC = easy...AB... 100 - 240 V AC = easy...AC... 8 digital inputs 2 usable as analog inputs (DA, DC or AB versions) 4 relay outputs (max. 10 A, UL) or 4 transistor outputs Display and keypad optional Bolt-on and top-hat rail mounting Screw terminals Page 12/6 1
12/5
700
Expandable: Digital inputs/outputs and bus systems AS-Interface, CANopen, PROFIBUS-DP, DeviceNet 12 V DC = easy...DA... 24 V DC = easy...DC... 24 V AC = easy...AB... 100 - 240 V AC = easy...AC... 12 digital inputs 4 usable as analog inputs (DA, DC or AB versions) 6 relay outputs (max. 10 A, UL) or 8 transistor outputs Display and keypad optional Bolt-on and top-hat rail mounting Screw terminals Page 12/7
EASY6...
24 V DC 12 digital inputs 6 relay outputs (max. 10 A, UL) or 8 transistor outputs Bolt-on and top-hat rail mounting Screw terminals Page 12/15
11
EASY200-EASY
For remote connection of a digital I/O expansion through two-pole connection cable (max. 30 m); e.g. NYM 3 1.5 mm2 Bolt-on and top-hat rail mounting Screw terminals Page 12/15
12
EASY221-CO
CANopen connection, 24 V DC Page 12/16
EASY222-DN
DeviceNet connection, 24 V DC Page 12/16
2010 CA08103002Z-EN
www.eaton.com
12/6
Ordering
500/700Basic devices
Control relays
Basic devices
500/700
HPL12006EN
Supply voltage
Std. pack
500
Stand alone 8 8 8 8 8 8 8 8 8 8 8 8 2 2 2 2 2 2 2 2 2 4 4 4 4 4 4 4 4 4 4 4 4 24 V AC 24 V AC 100 - 240 V AC 100 - 240 V AC 100 - 240 V AC 12 V DC 12 V DC 24 V DC 24 V DC 24 V DC 24 V DC 24 V DC EASY512-AB-RC 274101 EASY512-AB-RCX 274102 EASY512-AC-R 274103 EASY512-AC-RC 274104 EASY512-AC-RCX 274105 EASY512-DA-RC 274106 EASY512-DA-RCX 274107 EASY512-DC-R 274108 EASY512-DC-RC 274109 EASY512-DC-RCX 274110 EASY512-DC-TC 274111 EASY512-DC-TCX 274112 EASY-COMBINATION-*1) 257823 Information relevant for export to North America Product Standards IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987; CE marking E135462 NRAQ 012528 2252-01 + 2258-02 UL Listed, CSA certified IEC: IP20, UL/CSA Type: 1 off
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection
1) UL/CSA
3 4 5
Accessories 1 Ethernet gateway 2 Connection cable 3 Power supply unit/communication 4 Display/keypad 5 Programming software 6 PC programming cable 7 Switched-mode power supply unit 8 Memory card
Page Page 12/16 Page 12/27 Page 12/23 Page 12/16 Page 12/9 Page 12/9 Page 12/10 Page 12/9
Power
6
easy 500
7 8
2010 CA08103002Z-EN
2, 6
www.eaton.com
500/700
HPL12007EN
500/700Basic devices
Control relays
Basic devices
12/7
Supply voltage
Std. pack
700
Expandable: Digital inputs/outputs and bus systems AS-Interface, CANopen, PROFIBUS-DP, DeviceNet 12 4 6 24 V AC 12
ALT OK
DEL
4 4 4 4 4 4 4
6 6 6 6 6 6 6
8 8
ESC
12 12 12 12 12 12 12 12
EASY719-AB-RC 274113 EASY719-AB-RCX 274114 EASY719-AC-RC 274115 EASY719-AC-RCX 274116 EASY719-DA-RC 274117 EASY719-DA-RCX 274118 EASY719-DC-RC 274119 EASY719-DC-RCX 274120 EASY721-DC-TC 274121 EASY721-DC-TCX 274122 EASY-COMBINATION-*1) 257823
1 off
Information relevant for export to North America Product Standards IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987; CE marking E135462 NRAQ 012528 2252-01 + 2258-02 UL Listed, CSA certified IEC: IP20, UL/CSA Type: -
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection
1) UL/CSA
3 4 5
Power
6
easy 700
Power
Accessories 1 Ethernet gateway 2 Connection cable 3 Power supply unit/communication module 4 Display/keypad 5 Programming software 6 PC programming cable 7 Switched-mode power supply unit 8 Memory card 9 Inputs/outputs expansion 10 output expansion, bus module, coupling module
Page Page 12/16 Page 12/27 Page 12/23 Page 12/16 Page 12/9 Page 12/9 Page 12/10 Page 12/9 Page 12/15 Page 12/16
9 2, 6
Power
10
2010 CA08103002Z-EN
www.eaton.com
12/8
Expansion devices500/700
Control relays
Expansion devices
500/700
HPL12008EN
Inputs Digital
Supply voltage
Std. pack
I/O expansions
Can be used through easyLink 12 12
Power
100 - 240 V AC 24 V DC
1 off
Product Standards
12
6 2
24 V DC 24 V DC
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection Product Standards
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection 6 6 4 4 24 V DC 24 V DC EASY410-DC-RE 114293 EASY410-DC-TE 114294 NA Certification Degree of Protection
IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987; CE marking E135462 NRAQ, NRAQ7 012528 2252-01 + 2258-02 UL Listed, CSA certified IEC: IP20, UL/CSA Type: IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987; CE marking E135462 NRAQ, NRAQ7 012528 2252-01 UL Listed, CSA certified IEC: IP20, UL/CSA Type: Request filed for UL and CSA IEC: IP20, UL/CSA Type: -
Coupling module
Can be used through easyLink For remote connection of a digital I/O expansion up to 30 m. EASY200-EASY 212315 1 off Product Standards IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987; CE marking E135462 NRAQ, NRAQ7 012528 2252-01 + 2258-02 UL Listed, CSA certified IEC: IP20, UL/CSA Type: -
Bus modules
Can be used through easyLink AS-Interface Slave 4 inputs, 4 outputs, 4 parameter bits Addresses available 0 to 31 Slave Addresses available 1 to 126 Addresses available 1 to 127 EASY205-ASI 221598 1 off
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection
PROFIBUSDP
24 V DC
EASY204-DP 212316
CANopen
24 V DC
EASY221-CO 233539
DeviceNet
Addresses available 0 to 63
24 V DC
EASY222-DN 233540
Ethernet gateway
Serial interface easyRelay or MFD-...CP8/CP10... to Ethernet, for connecting to easyOPC server, easySoft, or easyCom 24 V DC EASY209-SE 101520 1 off
1) Not
for use in combination with basic unit EASY719-DA-... Cannot be used on the EASY200EASY coupling module
www.eaton.com
500/700
HPL12009EN
Accessories500/700
Control relays
Accessories
12/9
Supply voltage
Description
Std. pack
1 off
Product Standards
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection
IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987; CE marking E135462 NRAQ 012528 2252-01 + 2258-02 UL Listed, CSA certified IEC: IP65, in combination with MFD-XM-80: UL/CSA Type 4X IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987; CE marking E135462 NRAQ 012528 2252-01 + 2258-02 UL Listed, CSA certified IEC: IP65, UL/CSA Type 4X
Without keypad, with Moeller company logotype Without keypad, without Moeller company logotype NEMA 4x
1 off
Product Standards
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection
Power supply unit/communication modules IP20, can be combined with display/operating unit MFD-80... as remote text display 24 V DC With connection cable (5 m, can be cut to length) 100 - 240 V AC With connection cable (5 m, can be cut to length) 24 V DC Without connection cable 100 - 240 V AC Without connection cable
1 off
Product Standards
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection 1 off
IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987; CE marking E135462 NRAQ 012528 2252-01 + 2258-02 UL Listed, CSA certified IEC: IP20, UL/CSA Type: -
Programming software
Menu selection in 13 languages Operating systems: Windows 2000 SP4, Windows XP SP3, Windows Vista (32 Bit), Windows 7 (32 Bit) EASY-SOFT-BASIC 284545 EASY-SOFT-PRO 266040 EASY-PC-CAB 202409 EASY-USB-CAB 107926 UL/CSA certification not required
Programming cable
SUB-D, 9 pole, serial, 2 m 1 off Product Standards IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987; CE marking E135462 NRAQ 012528 2252-01 + 2258-02 UL Listed, CSA certified IEC: IP20, UL/CSA Type: -
USB, 2 m
1 off UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection 1 off
Connecting cables
For connecting the MFD(-AC)-CP4 or EASY209-SE with easy500/easy700, 5 m, can be cut to length MFD-CP4-500CAB5 280886
Memory cards
32-kB module EASY-M-32K 270884 AWB2528-1508D 278499 AWB2528-1508GB 278500 1 off
Manuals
Deutsch English 1 off 1 off
2010 CA08103002Z-EN
www.eaton.com
12/10
Accessories500/700
Control relays
Accessories
500/700
HPL12010EN
Supply voltage
Description
Std. pack
Input/output simulators
24 V DC With plug-in power supply unit 100 - 240 V AC/ 24 V DC With plug-in power supply unit 120 V AC/24 V DC, plug for North America With plug-in power supply unit 100 - 240 V AC/ 24 V DC easy500-DC EASY412-DC-SIM 212318 1 off
24 V DC
easy500-DC
EASY412-DC-SIM-NA 222566
24 V DC
EASY800-DC-SIM 256278
Accessories
Description
Std. pack
EASY200-POW 229424
1 off
Product Standards
EASY400-POW 212319
1 off
Power
Rated input voltage: 50/60 Hz: 100 - 240 V AC Rated output voltage (residual ripple): 24 V DC ( 3 %) Rated output current: 2.5 A Rated input voltage: 50/60 Hz: 100 - 240 V AC Rated output voltage (residual ripple): 24 V DC ( 3 %) Rated output current: 4.2 A
1 off 1 off
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection Product Standards
UL File No. UL CCN CSA File No. 1 off CSA Class No. NA Certification Degree of Protection
EASY600-POW 262399
IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987; CE marking E135462 NRAQ 012528 2252-01 + 2258-02 UL Listed, CSA certified IEC: IP20, UL/CSA Type: IEC/EN see Technical Data; UL 508; CSA C22.2 No. 107.1-01; CE marking E300415 NMTR, NMTR7 UL report applies to both US and Canada 3211-87, 3211-07 UL Listed, certified by UL for use in Canada IEC: IP20, UL/CSA Type: -
2010 CA08103002Z-EN
www.eaton.com
500/700
HPL12011EN
Accessories500/700
Control relays
Accessories
12/11
Description
Std. pack
Ballast
To increase the AC input current 6 channels, cable length up to 100 m EASY256-HCI 231168 1 off Product Standards IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987; CE marking E135462 NRAQ 012528 2252-01 UL Listed, CSA certified IEC: IP20, UL/CSA Type: -
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection
Connection plug
Bus connector plug between base unit and expansion unit/bus module EASY-LINK-DS 221607 1 off UL/CSA certification not required
Fixing bracket
For screw fixing to mounting plate 3 fixing brackets per easy400, 500, 600, 700, 800, EC4P, ES4P 2 fixing brackets per easy200 3 fixing brackets per, MFD...-CP8/CP10 ZB4-101-GF1 061360 9 off UL/CSA certification not required
Telescopic clip
With 35mm top-hat rail to IEC/EN 60715 for adjusting the mounting depth when rear mounting in CI-K enclosures and cabinets. Stepless adjustment via scale from 75 115 mm. Screw and snap fastening M22-TA 226161 1 off Product Standards IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14-05; CSA-C22.2 No. 94-91; CE marking E29184 NKCR 012528 3211-03 UL Listed, CSA certified
UL File No. UL CCN CSA File No. CSA Class No. NA Certification SKF-HA 233782 1 off
Inspection window
94 mm x 77 mm x 25 mm (4 space units) For use with easy500 130 mm x 77 mm x 25 mm (6 space units) For use with EASY700, EASY800, EC4P, ES4P
800Basic devices
1 off 1 off
2010 CA08103002Z-EN
www.eaton.com
12/12
Control relays
Basic devices
800
System overview
2 1 1 2 3
L DE
T AL
14
2010 CA08103002Z-EN
C ES
OK
15 15
POW
BUS
MS NS
14
10 9, 12 11
10
12
www.eaton.com
800
800
Control relays
Output expansion
1
12/13
Coupling module
8
EASY202-RE
2 relay outputs (max. 10 A, UL) Bolt-on and top-hat rail mounting Screw terminals Page 12/15
EASY200-EASY
For remote connection of a digital I/O expansion through two-pole connection cable (max. 30 m); e.g. NYM 3 1.5 mm Bolt-on and top-hat rail mounting Screw terminals Page 12/15
11
EASY411-DC-ME
24 V DC 1 digital input 6 analog inputs (2 010 V, 2 020 mA and 2 Pt100; voltage inputs (010 V) can optionally be used as digital inputs 2 transistor outputs/ 2 analog outputs (010 V) Bolt-on and top-hat rail mounting Screw terminals Page 12/15
15
EASY6...
24 V DC 12 digital inputs 6 relay outputs (max. 10 A, UL) or 8 transistor outputs Bolt-on and top-hat rail mounting Screw terminals Page 12/15
10
EASY410...
24 V DC 6 digital inputs 4 relay outputs (max. 10 A, UL) or 4 transistor outputs Bolt-on and top-hat rail mounting Screw terminals Page 12/15
12
EASY205-ASI
AS-Interface connection as slave Page 12/16
EASY221-CO
CANopen connection, 24 V DC Page 12/16
EASY222-DN
DeviceNet connection, 24 V DC Page 12/16
2010 CA08103002Z-EN
www.eaton.com
12/14
Ordering
800Basic devices
Control relays
Basic devices
800
HPL12014EN
Supply voltage
Std. pack
800
Expandable: Digital and analog inputs/outputs and bus systems AS-Interface, CANopen, PROFIBUS-DP, DeviceNet Bus system easyNet on board Individual laser inscription possible with EASY-COMBINATION-* Page 12/6
easyNet on board 12 12 12 12 12 12 12 12 12 12 4 4 4 4 4 4 4 4 6 6 6 6 6 6 8 8 8 8 1 1 1 1 100 - 240 V AC 100 - 240 V AC 24 V DC 24 V DC 24 V DC 24 V DC 24 V DC 24 V DC 24 V DC 24 V DC EASY819-AC-RC 256267 EASY819-AC-RCX 256268 EASY819-DC-RC 256269 EASY819-DC-RCX 256270 EASY820-DC-RC 256271 EASY820-DC-RCX 256272 EASY821-DC-TC 256273 EASY821-DC-TCX 256274 EASY822-DC-TC 256275 EASY822-DC-TCX 256276 1 off
Information relevant for export to North America Product Standards UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987; CE marking E135462 NRAQ 012528 2252-01 + 2258-02 UL Listed, CSA certified IEC: IP20, UL/CSA Type: -
3 4
2 easyNet 11
Power
easy 800
Power
Accessories 1 Ethernet gateway 2 Connection cable 3 Power supply unit/communication module 4 Display/keypad 5 Programming software 6 PC programming cable 7 Switched-mode power supply unit 8 Memory card 9 Inputs/outputs expansion 10 output expansion units, bus module, coupling module 11 easyNet 12 Multi-function display MFD-Titan
Page Page 12/16 Page 12/27 Page 12/23 Page 12/16 Page 12/9 Page 12/9 Page 12/10 Page 12/9 Page 12/15 Page 12/16 Page 12/18 Page 12/22
7 8
2, 6 9 9
Power
easy 800
MFD Titan
2, 6 12 8
10
2010 CA08103002Z-EN
www.eaton.com
800
HPL12015EN
800Expansion devices
Control relays
Expansion devices
12/15
Inputs Digital
Supply voltage
Std. pack
I/O expansions
Can be used through easyLink 12 12
Power
100 - 240 V AC 24 V DC
1 off
Product Standards
12
6 2
24 V DC 24 V DC
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection Product Standards
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection 6 6 4 4 24 V DC 24 V DC EASY410-DC-RE 114293 EASY410-DC-TE 114294 NA Certification Degree of Protection
IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142M1987; CSA C22.2 No. 213M1987; CE marking E135462 NRAQ, NRAQ7 012528 2252-01 + 2258-02 UL Listed, CSA certified IEC: IP20, UL/CSA Type: IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987; CE marking E135462 NRAQ, NRAQ7 012528 2252-01 UL Listed, CSA certified IEC: IP20, UL/CSA Type: Request filed for UL and CSA IEC: IP20, UL/CSA Type: -
Coupling module
Can be used through easyLink For remote connection of a digital I/O expansion up to 30 m. EASY200-EASY 212315 1 off Product Standards IEC/EN see Technical Data; UL 508; CE marking; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987 E135462 NRAQ, NRAQ7 012528 2252-01 + 2258-02 UL Listed, CSA certified IEC: IP20, UL/CSA Type: -
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection
Supply voltage
Std. pack
I/O expansions
Can be used through easyLink 1 / 2 2) 1 / 6 3) 2 2 2 2 1 2 24 V DC 24 V DC EASY406-DC-ME 114295 EASY411-DC-ME 116567 1 off 1 off
Notes
1) Not
for use in combination with EASY719-DA-basic unit Cannot be used on the EASY200EASY coupling module 2) 2 0 - 10 V, 2 0 - 20 mA, 2 RTD (2/3-wire connection); any combination Voltage inputs (010 V) can optionally be used as digital inputs 3) 2 x 0 - 10 V, 2 x 0 - 20 mA, 2 x Pt100 (2/3 wire connection); Voltage inputs (010 V) can optionally be used as digital inputs
Information relevant for export to North America NA Certification Degree of Protection Request filed for UL and CSA IEC: IP20, UL/CSA Type: -
2010 CA08103002Z-EN
www.eaton.com
12/16
800Expansion units, accessories
Control relays
Expansion units, accessories
800
HPL12016EN
Description
Supply voltage
Std. pack
Bus modules
Can be used through easyLink AS-Interface Slave 4 inputs, 4 outputs, 4 parameter bits Addresses available 0 to 31 Slave Addresses available 1 to 126 Addresses available 1 to 127 EASY205-ASI 221598 1 off Product Standards IEC/EN see Technical Data; UL 508; CE marking; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987 E135462 NRAQ, NRAQ7 012528 2252-01 + 2258-02 UL Listed, CSA certified IEC: IP20, UL/CSA Type: -
PROFIBUSDP
24 V DC
EASY204-DP 212316
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection
CANopen
24 V DC
EASY221-CO 233539
DeviceNet
Addresses available 0 to 63
24 V DC
EASY222-DN 233540
Ethernet gateway
Serial interface easyRelay or MFD-...CP8/CP10... to Ethernet, for connecting to easyOPC server, easySoft, or easyCom 24 V DC EASY209-SE 101520 1 off
1 off UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection
Without keypad, with Moeller company logotype Without keypad, without Moeller company logotype NEMA 4x
1 off 1 off
Product Standards
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection
Power supply unit/communication modules IP20, can be combined with display/operating unit MFD-80... as remote text display Product Standards With connection cable (5 m, can be cut to length) With connection cable (5 m, can be cut to length) Without connection cable Without connection cable 24 V DC 100 - 240 V AC 24 V DC 100 - 240 V AC MFD-CP4-800 274095 MFD-AC-CP4-800 286824 MFD-CP4 280888 MFD-AC-CP4 286822 1 off IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987; CE marking E135462 NRAQ 012528 2252-01 + 2258-02 UL Listed, CSA certified IEC: IP20, UL/CSA Type: -
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection
2010 CA08103002Z-EN
www.eaton.com
800
HPL12017EN
800Accessories
Control relays
Accessories
12/17
Description
Std. pack
Programming software
Menu selection in 13 languages Operating systems: Windows 2000 SP4, Windows XP SP3, Windows Vista (32 Bit), Windows 7 (32 Bit) EASY-SOFT-PRO 266040 1 off UL/CSA certification not required
Programming cable
Sub-D, 9 pole, serial, 2 m EASY800-PC-CAB 256277 1 off Product Standards IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987; CE marking E135462 NRAQ 012528 2258-02 UL Listed, CSA certified
USB, 2 m
EASY800-USB-CAB 106408
1 off
UL File No. UL CCN CSA File No. CSA Class No. NA Certification
Modem cable
Configurable modem, printer and programming cable, possible transfer rate 56 kbaud, 9 pole Sub-D plug (plug + socket for assembly by user) EASY800-MO-CAB 286079 1 off
Connecting cables
For connecting MFD(-AC)-CP4 with easy800/MFD-..-CP8/CP10... 5 m, can be cut to length MFD-CP4-800-CAB5 280887 1 off Product Standards IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987; CE marking E135462 NRAQ 012528 2252-01 + 2258-02 UL Listed, CSA certified IEC: IP20, UL/CSA Type: IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987; CE marking E135462 NRAQ 012528 2258-02 UL Listed, CSA certified IEC: IP20, UL/CSA Type: -
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection
Memory cards
256-kB module EASY-M-256K 256279 1 off Product Standards
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection
800Accessories
Supply voltage
Description
Std. pack
Input/output simulator
24 V DC With plug-in power supply unit 100 - 240 V AC/ 24 V DC easy700-DC easy800-DC EC4P EASY800-DC-SIM 256278 1 off
Manual
User manual, German User manual, English AWB2528-1423D 261371 AWB2528-1423GB 262671 1 off 1 off
2010 CA08103002Z-EN
www.eaton.com
12/18
800Accessories
Control relays
Accessories
800
HPL12018EN
Description
Std. pack
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection
Data cable
4 x 0.14 mm, twisted pair, AWG 26 Length: 100 m easyNet EASY-NT-CAB 256286 1 off UL File No. UL CCN NA Certification Degree of Protection Product Standards E135462 NRAQ UL Listed IEC: IP 20, UL/CSA Type: IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987; CE marking E135462 NRAQ 012528 2258-02 UL Listed, CSA certified IEC: IP20, UL/CSA Type: -
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection
Crimping tool
For RJ45 plug EASY-NT-CAB EASY-NT-RJ45 EASY-RJ45-TOOL 256282 MFD-800-CAB5 266041 1 off
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection
Power
Rated input voltage: 50/60 Hz: 100 - 240 V Rated output voltage: 24 V/12 V DC Rated output current: 0.35 A/20 mA Rated input voltage: 50/60 Hz: 100 - 240 V AC Rated output voltage (residual ripple): 24 V DC ( 3 %) Rated output current: 1.25 A Rated input voltage: 50/60 Hz: 100 - 240 V AC Rated output voltage (residual ripple): 24 V DC ( 3 %) Rated output current: 2.5 A Rated input voltage: 50/60 Hz: 100 - 240 V AC Rated output voltage (residual ripple): 24 V DC ( 3 %) Rated output current: 4.2 A
EASY200-POW 229424
1 off
Product Standards
EASY400-POW 212319
1 off
1 off 1 off
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection Product Standards
UL File No. UL CCN CSA File No. 1 off CSA Class No. NA Certification Degree of Protection
EASY600-POW 262399
Power
IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987; CE marking E135462 NRAQ 012528 2252-01 + 2258-02 UL Listed, CSA certified IEC: IP20, UL/CSA Type: IEC/EN see Technical Data; UL 508; CSA C22.2 No. 107.1-01; CE marking E300415 NMTR, NMTR7 UL report applies to both US and Canada 3211-87, 3211-07 UL Listed, certified by UL for use in Canada IEC: IP20, UL/CSA Type: -
800Accessories
2010 CA08103002Z-EN
www.eaton.com
800
HPL12019EN
800Accessories
Control relays
Accessories
12/19
Description
Std. pack
Ballast
To increase the AC input current 6 channels, cable length up to 100 m EASY256-HCI 231168 1 off Product Standards IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987; CE marking E135462 NRAQ 012528 2252-01 UL Listed, CSA certified IEC: IP20, UL/CSA Type: -
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection
Connection plug
Bus connector plug between base unit and expansion unit/bus module EASY-LINK-DS 221607 1 off UL/CSA certification not required
Fixing bracket
For screw fixing to mounting plate 3 fixing brackets per easy400, 500, 600, 700, 800, EC4P, ES4P 2 fixing brackets per easy200 3 fixing brackets per MFD...-CP8/CP10- ZB4-101-GF1 061360 9 off UL/CSA certification not required
Telescopic clip
With 35 mm top-hat rail to IEC/EN 60715 for mounting depth compensation when rear mounting in CI-K enclosures and cabinets. Stepless adjustment via scale from 75 115 mm. Screw and snap fastening M22-TA 226161 1 off Product Standards UL File No. UL CCN CSA File No. CSA Class No. NA Certification IEC/EN 60947-5; UL 508; CSAC22.2 No. 14-05; CSA-C22.2 No. 94-91; CE marking E29184 NKCR 012528 3211-03 UL Listed, CSA certified
Inspection window
130 mm x 77 mm x 25 mm (6 space units) For use with EASY700, EASY800, EC4P, ES4P SKF-FF6 233781 1 off UL/CSA certification not required
MFD-Titan
2010 CA08103002Z-EN
www.eaton.com
12/20
Multi-function display
MFD-Titan
System overview
1 1 2
14
POW
BUS
MS
13 13
NS
9 8, 10 11
7 12 9
10
2010 CA08103002Z-EN
www.eaton.com
MFD-Titan
MFD-Titan
The multi-function display MFD-Titan can be used in the following combinations: Power supply unit/CPU Power supply unit/CPU + I/O modules Power supply unit/CPU + display and operating unit Power supply unit/CPU + display and operating unit + I/O modules Page 12/22
Multi-function display
Display/operating unit, power supply unit/CPU module
Bus modules EASY204-DP
PROFIBUS DP connection as slave, 24 V DC Page 12/16 3
12/21
9
EASY6...
24 V DC 12 digital inputs 6 relay outputs (max. 10 A,UL) or 8 transistor outputs Bolt-on and top-hat rail mounting Screw terminals Page 12/15
EASY221-CO
CANopen connection, 24 V DC Page 12/16 1
EASY410...
24 V DC 6 digital inputs 4 relay outputs (max. 10 A,UL) or 4 transistor outputs Bolt-on and top-hat rail mounting Screw terminals Page 12/15
10
I/O modules
24 V DC 100 - 240 V AC 12 digital inputs 4 usable as analog inputs (DC versions) 4 relay outputs (max. 10 A,UL) or 4 transistor outputs 1 analog output, optional on DC versions Spring-loaded terminals Page 12/24
EASY205-ASI
AS-Interface connection as slave Page 12/16
EASY222-DN
DeviceNet connection, 24 V DC Page 12/16
Output expansion
1
EASY202-RE
2 relay outputs (max. 10 A, UL) Bolt-on and top-hat rail mounting Screw terminals Page 12/15
Display/keypad
24 V DC Monochrome display 132 64 pixels With or without keypad Custom laser labeling possible Page 12/16
24 V DC 1 digital input 2 analog inputs (2 010 V, 2 020 mA, 2 RTD); any combination Voltage inputs (010 V) can optionally be used as digital inputs 2 transistor outputs 1 analog output (0 - 10 V) Bolt-on and top-hat rail mounting Screw terminals Page 12/15
EASY411-DC-ME
24 V DC 1 digital input 6 analog inputs (2 x 0 - 10 V, 2 x 0 - 20 mA, 2 x Pt100); Voltage inputs (010 V) can optionally be used as digital inputs 2 transistor outputs/ 2 Analog outputs (0 - 10 V) Bolt-on and top-hat rail mounting Screw terminals Page 12/15
2010 CA08103002Z-EN
www.eaton.com
12/22
Ordering
Multi-function display
Display/operating units, CPU, communication modules
MFD-Titan
HPL12022EN
Supply voltage
Description
Std. pack
Display/keypad
Monochrome display 132 64 pixels with switchable backlight IP65, removable silver front frame With keypad, with Moeller company logotype NEMA 4x in conjunction with MFD-XM-80 protective diaphragm 12/29 With keypad, without Moeller company logotype NEMA 4x in conjunction with MFD-XM-80 protective diaphragm 12/29 MFD-80-B 265251 1 off Product Standards IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987; CE marking E135462 NRAQ 012528 2252-01 + 2258-02 UL Listed, CSA certified IEC: IP65, in combination with MFD-XM-80: UL/CSA Type 4X IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987; CE marking E135462 NRAQ 012528 2252-01 + 2258-02 UL Listed, CSA certified IEC: IP65, UL/CSA Type 4X
MFD-80-B-X 284905
1 off
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection
Without keypad, with Moeller company logotype NEMA 4x Without keypad, without Moeller company logotype NEMA 4x
1 off 1 off
Product Standards
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection
MFD-AC-CP8-NT 274092 MFD-AC-CP8-ME 274091 MFD-CP8-ME 267164 MFD-CP8-NT 265253 MFD-CP10-ME 1) 133801
1 off
Product Standards
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection
IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987; CE marking E135462 NRAQ 012528 2252-01 + 2258-02 UL Listed, CSA certified IEC: IP20, UL/CSA Type: -
1 off
24 V DC
MFD-CP10-NT 1) 133800
1 off
1)
Note
1)
2010 CA08103002Z-EN
www.eaton.com
MFD-Titan
HPL12023EN
MFD-TitanCommunication modules
Multi-function display
Communication modules
12/23
Supply voltage
Description
Std. pack
easy500 easy700
MFD-CP4-500 274094
1 off
Product Standards
MFD-CP4-800 274095
MFD-AC-CP4-500 286823
MFD-AC-CP4-800 286824
IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213M1987; CE marking UL File No. E135462 UL CCN NRAQ CSA File No. 012528 CSA Class No. 2252-01 + 2258-02 NA Certification UL Listed, CSA certified Degree of Protection IEC: IP20, UL/CSA Type: -
MFD-CP4 280888 MFD-AC-CP4 286822 MFD-80-... MFDMFD-CP8... COMBINATION-* MFD-CP10... 265260 1 off UL/CSA certification not required
Procedure and ordering example for Labeleditor inscription software Individually inscribe your device in 4 stages: Download the inscription software: www.moeller.net/support, keyword: Labeleditor Creation of label template (menu-guided in the software) Send the label template to the factory by email. The email address is automatically set for the selected product by the program. When your template is sent, the Labeleditor issues a file name such as EASY_12345.zip. This file name is part of the article to be ordered (see Ordering examples). Send order to the Eaton office or the electrical wholesalers. Ordering example: MFD-Titan MFD-80-B multi-function display with company name: 1 x MFD-COMBINATION-* 1 x MFD-80-B 1 x the file name MFD_xxxxx.zip issued by the Labeleditor
3 1
2 easyNet 10 11
Accessories 1 Ethernet gateway 2 Connection cable 3 Programming software 4 PC programming cable 5 Inputs/outputs expansion 6 output expansion, bus module, coupling module 7 Display/keypad 8 Power supply unit/CPU module 9 I/O module 10 Memory card 11 easyNet 12 Switched-mode power supply unit
Page Page 12/16 Page 12/27 Page 12/9 Page 12/9 Page 12/15 Page 12/16 Page 12/16 Page 12/23 Page 12/17 Page 12/9 Page 12/18 Page 12/10
MFD Titan
5 7 8
easy 800
Power
9 2, 4 10 9 8 12 6
2010 CA08103002Z-EN
www.eaton.com
12/24
MFD-TitanI/O modules
Multi-function display
I/O modules
MFD-Titan
HPL12024EN
Power supply
Temperature range
Std. pack
I/O modules
IP20, spring-loaded terminals
24 V DC 24 V DC 24 V DC 24 V DC 100 - 240 V DC
12 12 12 12 12
4 4 4 4
4 4 4
4 4
1 1
MFD-R16 265254 MFD-T16 265255 MFD-RA17 265364 MFD-TA17 265256 MFD-AC-R16 274093
24 V DC
6 6 6
2 2 2
2 2
4 4 4
6 6
2 2
4 4
1 1
-40+90 C 0+250 C 0+400 C -200+200 C 0+850 C -40+90 C 0+250 C -40+90 C 0+250 C 0+400 C -200+200 C 0+850 C -40+90 C 0+250 C
MFD-TP12-PT-A 106042 MFD-TP12-PT-B 106043 MFD-TP12-NI-A 106044 MFD-TAP13-PT-A 106045 MFD-TAP13-PT-B 106046 MFD-TAP13-NI-A 106047
1 off
1 off 1 off
Information relevant for export to North America Product Standards UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987; CE marking E135462 NRAQ 012528 2252-01 + 2258-02 UL Listed, CSA certified IEC: IP20, UL/CSA Type: -
2010 CA08103002Z-EN
www.eaton.com
MFD-Titan
HPL12025EN
MFD-TitanExpansion devices
Multi-function display
Expansion devices
12/25
Inputs Digital
Supply voltage
Std. pack
I/O expansions
Can be used through easyLink 12 12
Power
100 - 240 V AC 24 V DC
1 off
Product Standards
12
6 2
24 V DC 24 V DC
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection Product Standards
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection 6 6 4 4 24 V DC 24 V DC EASY410-DC-RE 114293 EASY410-DC-TE 114294 NA Certification Degree of Protection
IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142M1987; CSA C22.2 No. 213M1987; CE marking E135462 NRAQ, NRAQ7 012528 2252-01 + 2258-02 UL Listed, CSA certified IEC: IP20, UL/CSA Type: IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987; CE marking E135462 NRAQ, NRAQ7 012528 2252-01 UL Listed, CSA certified IEC: IP20, UL/CSA Type: Request filed for UL and CSA IEC: IP20, UL/CSA Type: -
Coupling module
Can be used through easyLink For remote connection of a digital I/O expansion up to 30 m. EASY200-EASY 212315 1 off Product Standards IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987; CE marking E135462 NRAQ, NRAQ7 012528 2252-01 + 2258-02 UL Listed, CSA certified IEC: IP20, UL/CSA Type: -
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection
Supply voltage
Std. pack
I/O expansions
Can be used through easyLink 1 / 22) 1 / 63) 2 2 2 2 1 2 24 V DC 24 V DC EASY406-DC-ME 114295 EASY411-DC-ME 116567 1 off 1 off
Notes
1) Not 2) 2
for use in combination with basic unit EASY719-DA-... Cannot be used on the EASY200EASY coupling module 0 - 10 V, 2 0 - 20 mA, 2 RTD (2/3-wire connection); any combination Voltage inputs (010 V) can optionally be used as digital inputs 3) 2 x 0 - 10 V, 2 x 0 - 20 mA, 2 x Pt100 (2/3 wire connection); Voltage inputs (0 10 V) can optionally be used as digital inputs
Information relevant for export to North America NA Certification Degree of Protection Request filed for UL and CSA IEC: IP20, UL/CSA Type: -
2010 CA08103002Z-EN
www.eaton.com
12/26
MFD-TitanExpansion devices
Multi-function display
Expansion devices
MFD-Titan
HPL12026EN
Description
Supply voltage
Std. pack
Bus modules
Can be used through easyLink AS-Interface Slave 4 inputs, 4 outputs, 4 parameter bits Addresses available 0 to 31 Slave Addresses available 1 to 126 Addresses available 1 to 127 EASY205-ASI 221598 1 off Product Standards IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987; CE marking UL File No. E135462 UL CCN NRAQ, NRAQ7 CSA File No. 012528 CSA Class No. 2252-01 + 2258-02 NA Certification UL Listed, CSA certified Degree of ProtectionIEC: IP20, UL/CSA Type: -
PROFIBUSDP
24 V DC
EASY204-DP 212316
CANopen
24 V DC
EASY221-CO 233539
DeviceNet
Addresses available 0 to 63
24 V DC
EASY222-DN 233540
Ethernet gateway
Serial interface easyRelay or MFD-...CP8/CP10... to Ethernet, for connection to easyOPC server, easySoft, or easyCom 24 V DC EASY209-SE 101520 1 off
MFD-TitanAccessoriesMFD-TitanAccessories
Description
Std. pack
Programming software
Menu selection in 13 languages Operating systems: Windows 2000 SP4, Windows XP SP3, Windows Vista (32-bit), Windows 7 (32-bit) EASY-SOFT-PRO 266040 1 off
Programming cable
SUB-D, 9 pole, serial, 2 m EASY800-PC-CAB 256277 1 off Product Standards IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142M1987; CSA C22.2 No. 213-M1987; CE marking E135462 NRAQ 012528 2258-02 UL Listed, CSA certified
UL File No. UL CCN CSA File No. CSA Class No. NA Certification USB, 2 m EASY800-USB-CAB 106408 1 off
Modem cable
Configurable modem, printer and programming cable, possible transfer rate 56 kbaud, 9 pole Sub-D plug (plug + socket for self connection) EASY800-MO-CAB 286079 1 off
Connecting cables
2010 CA08103002Z-EN
www.eaton.com
MFD-Titan
HPL12027EN
Description For use with Part no. Article no.
Multi-function display
Accessories
12/27
Std. pack
For connecting the MFD (-AC)-CP4 or EASY209-SE with easy500/easy700, 5 m, can be cut to length For connecting the MFD (-AC)-CP4 or EASY209-SE with easy800/MFD-..-CP8/CP10..., 5 m, can be cut to length
MFD-CP4-500-CAB5 280886
1 off
Product Standards
MFD-CP4-800-CAB5 280887
1 off
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection Product Standards
IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142M1987; CSA C22.2 No. 213-M1987; CE marking E135462 NRAQ 012528 2252-01 + 2258-02 UL Listed, CSA certified IEC: IP20, UL/CSA Type: IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142M1987; CSA C22.2 No. 213-M1987; CE marking E135462 NRAQ 012528 2258-02 UL Listed, CSA certified IEC: IP20, UL/CSA Type: -
Memory cards
256-kB module 512-kB module MFD--CP8 MFD-CP10... EASY-M-256K 256279 EASY-M-512K1) 134969 1 off 1 off UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection
Manuals
German English MFD-Titan MFD-Titan AWB2528-1480D 267187 AWB2528-1480GB 267188 1 off 1 off
Data cable
4 x 0.14 mm, twisted pair, AWG 26 Length: 100 m Note
MFD-TitanAccessories
easyNet
EASY-NT-CAB 256286
1 off
1)
For availability please inquire Description For use with Part no. Article no. Price See price list Std. pack Information relevant for export to North America
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection
Crimping tool
For RJ45 plug EASY-NTCAB EASY-NTRJ45 EASY-RJ45-TOOL 256282 1 off
2010 CA08103002Z-EN
www.eaton.com
12/28
Multi-function display
Accessories
MFD-Titan
HPL12028EN
Description
Std. pack
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection
Description
Std. pack
EASY400-POW 212319
1 off
Power
1 off 1 off
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection Product Standards
UL File No. UL CCN CSA File No. 1 off CSA Class No. NA Certification Degree of Protection
EASY600-POW 262399
Power
Ballast
To increase the AC input current 6 channels, cable length up to 100 m EASY256-HCI 231168 1 off Product Standards IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142-M1987; CSA C22.2 No. 213-M1987; CE marking E135462 NRAQ 012528 2252-01 UL Listed, CSA certified IEC: IP20, UL/CSA Type: -
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection
2010 CA08103002Z-EN
www.eaton.com
MFD-Titan
HPL12029EN
MFD-TitanAccessories
Multi-function display
Accessories
12/29
Description
Std. pack
Connection plug
Bus connector plug between base unit and expansion unit/bus module EASY-LINK-DS 221607 1 off UL/CSA certification not required
Fixing bracket
For screw fixing to mounting plate 3 fixing brackets per easy400, 500, 600, 700, 800, EC4P, ES4P 2 fixing brackets per easy200 3 fixing brackets per MFD...-CP8/CP10 ZB4-101-GF1 061360 9 off UL/CSA certification not required
Telescopic clip
With 35mm top-hat rail to IEC/EN 60715 for mounting depth compensation when rear mounting in CI-K enclosures and cabinets. Stepless adjustment via scale from 75 115 mm. Screw and snap fastening M22-TA 226161 1 off Product Standards IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14-05; CSA-C22.2 No. 94-91; CE marking E29184 NKCR 012528 3211-03 UL Listed, CSA certified
UL File No. UL CCN CSA File No. CSA Class No. NA Certification
MFD-TS-144 274090
1 off
Protective cover
Transparent Protection against accidental actuation sealable Application without front frames MFD-80 MFD-XS-80 265259 1 off Product Standards IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142M1987; CSA C22.2 No. 213M1987; CE marking UL File No. E135462 UL CCN NRAQ CSA File No. 012528 CSA Class No. 2252-01 + 2258-02 NA Certification UL Listed, CSA certified Product Standards IEC/EN see Technical Data; UL 508; CSA C22.2 No. 142M1987; CSA C22.2 No. 213M1987; CE marking UL File No. E135462 UL CCN NRAQ CSA File No. 012528 CSA Class No. 2252-01 + 2258-02 NA Certification UL Listed, CSA certified Degree of ProtectionIEC: IP65, UL/CSA Type 4X
Protective diaphragm
Transparent version for harsh environmental conditions and application in the food industry For increasing the degree of protection to NEMA 4X for MFD-80-B MFD-80 MFD-XM-80 265258 1 off
2010 CA08103002Z-EN
www.eaton.com
12/30
...Basic devices, expansion devices
Control relays
Basic devices, expansion devices
EASY200-EASY EASY202-RE EASY4-DC-E EASY512- EASY6... EASY7
...
EASY8..-
Technical data
General Standards Dimensions (W x H x D) Weight Mounting Terminal capacity Solid Flexible with ferrule Flat-blade screwdriver Max. tightening torque Ambient climatic conditions Operating ambient temperature Condensation LCD display (clearly legible) Storage Relative humidity, non-condensing (IEC/EN 60068-2-30) Air pressure (in operation) Ambient mechanical conditions Protection type (IEC/EN 60529, EN50178, VBG 4) Vibrations (IEC/EN 60068-2-6) Constant amplitude 0.15 mm Constant acceleration, 2 g Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms Drop to IEC/EN 60068-2-31 Drop height Free fall, packaged (IEC/EN 60068-2-32) Mounting position Electromagnetic compatibility (EMC) Overvoltage category/pollution degree Electrostatic discharge (ESD), to IEC EN 61000-4-2 Air discharge Contact discharge Electromagnetic fields (RFI), to IEC EN 61000-4-2 Radio interference suppression Burst to IEC/EN 61000-4-4 Supply cables Signal cables Power pulses (surge), to IEC/EN 61000-4-5 Power pulses (surge), to IEC/EN 61000-4-5 Radiated RFI, to IEC/EN 61000-4-6 Insulation resistance Clearance in air and creepage distances Insulation resistance Back-up/accuracy of the real-time clock Back-up time Accuracy of the real-time clock at 55 C Repetition accuracy of timing relays Accuracy of timing relay (of value) Resolution Range S Range M:S Range H:M Retentive memory Write cycles of the retentive memory (minimum) Notes % ms s min s/day kV kV kV kV V kV kV V/m Hz Hz Shocks mm m C C % hPa C mm2 mm2 mm Nm mm kg
EN 55011, EN 55022, IEC/EN 61000-4, IEC 60068-2-6, IEC 60068-2-27 35.5 x 90 x 58 (2 space units) 0.07 71.5 x 90 x 58 (4 space units) 0.2 107.5 x 90 x 58 (6 space units) 0.3 107.5 x 90 x 72 (6 space units) 0.3
Top-hat rail IEC/EN 60715, 35 mm or screw fixing using fixing brackets ZB4-101-GF1 (accessories). 0.2 - 4 (AWG 22 - 12) 0.2 - 2.5 (AWG 22 - 12) 3.5 x 0.8 0.6 -2555, low temperatures to IEC 60068-2-1, high temperatures to IEC 60068-2-2 Prevent condensation by means of suitable measures 0 - 55 -40 - 70 5 - 95 795 - 1080 IP20 10 - 57 57 - 150 18 50 1 Vertical or horizontal II/2 8 6 10 II/2 8 6 10 II/2 8 6 10 II/2 8 6 10 0 - 55 -40 - 70 5 - 95 795 - 1080 IP20 10 - 57 57 - 150 18 50 1 0 - 55 -40 - 70 5 - 95 795 - 1080 IP20 10 - 57 57 - 150 18 50 1 0 - 55 -40 - 70 5 - 95 795 - 1080 IP20 10 - 57 57 - 150 18 50 1
EN 50178
1)
EN 50178
1)
1
1000000 (106) 10000000 (1010) (read/write cycles)
For additional technical data EASY5 and EASY7 AWB2528-1508D, EASY8 AWB2528-1423D
1)
200 180 160 140 120 100 80 60 40 20 0 25C 55C
2 3
2010 CA08103002Z-EN
www.eaton.com
10 11 12 13 14 15 16 17 18 19 20
...DA...
...DA...Basic devices
Control relays
Basic devices
12/31
EASY512-DA- Power supply Rated operational voltage Permissible range Ripple Input current At rated voltage Voltage dips (IEC/EN 61131-2) Heat dissipation Digital inputs 12 V DC Number Inputs can be used as analog inputs Status display Potential isolation From power supply Between digital inputs From the outputs Rated operating voltage On signal 0 On signal 1 Input current on signal "1" I1 to I6 I7, I8, I11, I12 I9 to I10 Delay time from 0 to 1 Debounce ON Debounce OFF Delay time from 1 to 0 Debounce ON Debounce OFF Cable length (unshielded) Frequency counters High-speed counter inputs Maximum counter frequency Pulse shape Cable length shielded Analog inputs Number Potential isolation From power supply From the digital inputs From the outputs Between the inputs Input type Signal range Resolution, analog Resolution, digital Resolution Input impedance Accuracy of actual value Two EASY devices Within a single device Conversion time analog/digital Input current Cable length shielded Relay outputs Notes % % ms mA m 3 2, (I7, I8, I11, I12) 0.12 V Input delay ON: 20; Input delay OFF: each cycle time <1 < 30 See technical data, relay outputs V DC V V Bit k No No Yes No DC voltage 0 - 10 0.01 0.01 10 (value 1 - 1023) 11.2 2 (I7, I8) m kHz ms ms m 20 Normally 0.3 (I1 - I6), 0.15 (I7, I8) 100 2 (I3, I4) 2 (I1, I2) <1 Square < 30 ms ms 20 Normally 0.3 (I1 - I6), 0.35 (I7, I8) mA mA mA 3.3 (at 12 V DC) 1.1 (at 12 V DC) Ue Ue Ue V DC V DC V DC No No Yes 12 4 (I1 - I8) 8 (I1 - I8) 8 2 (I7, I8) LCD display (if provided) mA ms W Normally 140 10 Normally 2 Ue V V DC % 12 DC (-15/+30%) 10.215.6 5
EASY719-DA-
12 DC (-15/+30%) 10.215.6 5 Normally 200 10 Normally 3.5 12 4 (I7, I8, I11, I12) LCD display (if provided) No No Yes 12 4 (I1 - I12) 8 (I1 - I12) 3.3 (at 12 V DC) 1.1 (At 12 V DC) 3.3 (at 12 V DC) 20 Normally 0.3 (I1 - I6, I9, I10), 0.35 (I7, I8, I11, I12) 20 Normally 0.4 (I1 - I6, I9, I10), 0.35 (I7, I8, I11, I12) 100 2 (I3, I4) 2 (I1, I2) <1 Square < 30 4 (I7, I8, I11, I12) No No Yes No DC voltage 0 - 10 0.01 0.01 10 (value 0 - 1023) 11.2 3 2, (I7, I8, I11, I12) 0.12 V Input delay ON: 20; Input delay OFF: each cycle time <1 < 30
For additional Technical Data EASY5 and EASY7 AWB2528-1508D, EASY8 AWB2528-1423D
2010 CA08103002Z-EN
www.eaton.com
12/32
...AB...Basic devices
Control relays
Basic devices
...AB...
EASY512-AB- Power supply Rated operational voltage Permissible range Frequency Input current At 24 V AC 50/60 Hz Voltage dips (IEC/EN 61131-2) Heat dissipation At 24 V AC Digital inputs 24 V DC Number Inputs can be used as analog inputs Status display Potential isolation From power supply Between digital inputs From the outputs Rated operational voltage Rated voltage L (sinusoidal) On signal 0 On signal 1 Rated frequency Input current on signal "1" I1 to I6 I7, I8 I9, I10 I11, I12 Delay time (0 - 1/1 - 0) I1 - I12 Debounce ON, 50/60 Hz Debounce OFF, 50/60 Hz Max. admissible cable length (per input) Maximum remote installation distance I9, I10 Analog inputs Number Potential isolation From power supply From the digital inputs From the outputs Between the inputs Input type Signal range Resolution, analog Resolution, digital Resolution Input impedance Accuracy of actual value Two EASY devices Within a single device Conversion time analog/digital Input current Cable length shielded Relay outputs Notes % % ms mA m 3 2, (I7, I8) 0.12 V Input delay ON: 20; Input delay OFF: each cycle time <1 < 30 See technical data, relay outputs V DC V V Bit k No No Yes No DC voltage 0 - 10 0.01 0.01 10 (value 1 - 1023) 11.2 2 (I7, I8) m m 40 ms ms 8066 2016 mA mA mA mA 4 (at 24 V AC, 50 Hz) 2 (at 24 V AC, 50 Hz) 2 (at 24 V DC) Ue V AC V Hz 0-6 (I7, I8) > 7 AC, > 9.5 DC (I1 - I6) 14 - 26.4 AC 50 - 60 Ue V No No Yes 24 AC 8 2 (I7, I8) LCD display (if provided) VA Normally 5 mA ms Normally 200 20 Ue V V AC Hz 24 AC 20.426.4 50/60 ( 5%)
EASY719-AB-
24 AC 20.426.4 50/60 ( 5%) Normally 300 20 Normally 7 12 4 (I7, I8, I11, I12) LCD display (if provided) No No Yes 24 AC 0-6 (I7, I8, I11, I12) > 7 AC, > 9.5 DC (I1 - I6, I9, I10) 14 - 26.4 AC 50 - 60 4 (at 24 V AC, 50 Hz) 2 (at 24 V AC, 50 Hz) 2 (at 24 V DC) 4 (At 24 V AC, 50 Hz) 2 (at 24 V AC, 50 Hz) 2 (at 24 V DC) 8066 2016 40 Normally 40 4 (I7, I8, I11, I12) No No Yes No DC voltage 0 - 10 0.01 0.01 10 (value 0 - 1023) 11.2 3 2, (I7, I8, I11, I12) 0.12 V Input delay ON: 20; Input delay OFF: each cycle time <1 < 30
For additional technical data EASY5 and EASY7 AWB2528-1508D, EASY8 AWB2528-1423D
2010 CA08103002Z-EN
www.eaton.com
...DC...
...DC...Basic devices, expansion devices
12/33
EASY410-DC-RE EASY410-DC-TE Power supply Rated operational voltage Permissible range Ripple Input current At rated voltage Voltage dips (IEC/EN 61131-2) Heat dissipation Digital inputs 24 V DC Number Inputs can be used as analog inputs Status display Potential isolation From power supply Between digital inputs From the outputs From PC interface, memory card, easyNet, easyLink Rated operating voltage On signal 0 No No Yes Ue Ue V DC V DC 24 < 5 (R1 - R6) 6 mA ms W Normally 140 10 Normally 3.5 Ue V V DC % 24 DC (-15/+20%) 20.428.8 5
EASY512-DC-
EASY6..-DC-.E
EASY7..-DC-
EASY7..-DC-
EASY8..-DC-
LCD display (if provided) No No Yes 24 < 5 (I1 - I8) No No Yes 24 < 5 (I1 - I12, R1 - R12) No No Yes 24 < 5 (I1 - I12, R1 - R12) > 15.0 (I1 - I6, I9, I10), > 8.0 (I7, I8, I11, I12) 3.3 (at 24 V DC) 2.2 (at 24 V DC) 3.3 (at 24 V DC) 2.2 (at 24 V DC) 20 Normally 0.25 (I1 - I12) No No Yes 24 < 5 (I1 - I12, R1 - R12) > 15.0 (I1 - I6, I9, I10), > 8.0 (I7, I8, I11, I12) 3.3 (at 24 V DC) 2.2 (at 24 V DC) 3.3 (at 24 V DC) 2.2 (at 24 V DC) 20 Normally 0.25 (I1 - I12) No No Yes Yes 24 < 5 (I1 - I6, I9, I10) < 8 (I7, I8, I11, I12) > 15.0 (I1 - I6, I9, I10), > 8.0 (I7, I8, I11, I12) 3.3 (at 24 V DC) 2.2 (at 24 V DC) 3.3 (at 24 V DC) 2.2 (at 24 V DC) 20 Normally 0.1 (I1 - I4), normally 0.25 (I5 - I12) 20 Normally 0.1 (I1 - I4), normally 0.4 (I5, I6, I9, I12), normally 0.2 (I7, I8, I11, I12) 100 4 (I1, I2, I3, I4) <5 Square 2 (I1 + I2, I3 + I4) 3 Square 2 90 1:1 4 (I1, I2, I3, I4) < 20 <5 Square 100
On signal 1
Ue
V DC
Input current on signal "1" R1 - R6 (R12) I1 to I6 I7, I8 I9, I10 I11, I12 Delay time from 0 to 1 Debounce ON Debounce OFF ms ms 20 Normally 0.25 (R1 - R6) 20 Normally 0.25 (I1 - I8) 20 Normally 0.25 (R1 - R12) mA mA mA mA mA 3.3 (at 24 V DC) 3.3 (at 24 V DC) 2.2 (at 24 V DC) 3.3 (at 24 V DC)
Cable length (unshielded) Frequency counters Number Counter frequency Pulse shape Incremental counters Number Counter frequency Pulse shape Counter inputs I1 and I2, I3 and I4 Signal offset Mark-to-space ratio High-speed counter inputs Number Cable length, shielded Counter frequency Pulse shape Cable length (unshielded) Relay outputs Transistor outputs Notes
100
100 2 (I3, I4) <1 Square 1 2 (I1, I2) < 20 <1 Square 100
100 100
100 2 (I3, I4) <1 Square 1 2 (I1, I2) < 20 <1 Square 100
100 2 (I3, I4) <1 Square 1 2 (I1, I2) < 20 <1 Square 100
kHz
kHz
m kHz m
See technical data, relay outputs See technical data, transistor outputs
For additional technical data EASY5 and EASY7 AWB2528-1508D, EASY8 AWB2528-1423D
2010 CA08103002Z-EN
www.eaton.com
12/34
...DC...Basic devices, expansion devices
...DC...
EASY406-DC-ME Analog inputs Number Potential isolation From power supply From the digital inputs From the outputs From PC interface, memory card, easyNet, easyLink Input type Signal range Resolution, analog Resolution, digital Resolution Input impedance Accuracy of actual value Two EASY devices Within a single device Conversion time analog/digital Input current Cable length shielded Analog outputs Number Potential isolation From power supply From the digital inputs From the digital outputs easyLink Output type Signal range Signal range min. voltage Signal range max. voltage Max. output current Load resistance Overload and short-circuit protection Resolution, analog Resolution, digital Recovery time Accuracy -25 C - 55 C 25C Conversion time analog/digital Network easyNet Stations Data transfer rate/distance Number % % ms 2 1 200 V DC Bit s V V A 0 10 0.01 1 k Yes 0.01 10 (value 0 - 1023) No No No Yes DC voltage 1 % % ms mA m 3 <3% 800 <1 < 10 V DC V V Bit k No No No Yes DC voltage 0 - 10 10 (value 0 - 1023) 11.2 2
EASY411-DC-ME
EASY512-DC-
EASY7..-DC-
EASY8..-DC-
6 No No No Yes DC voltage 0 - 10 11.2 3 <3% 800 <1 < 10 2 No No No Yes DC voltage 0 10 0.01 1 k Yes 0.01 10 (value 0 - 1023) 2 1 200
4 (I7, I8, I11, I12) No No Yes Yes DC voltage 0 - 10 0.01 0.01 11.2 3 2, (I7, I8, I11, I12) 0.12 V Each CPU cycle <1 < 30 1 No No Yes Yes DC voltage 0 10 0.01 1 k Yes 0.01 10, (value: 0 1023) 100 2 1 Each CPU cycle Max. 8 1000 Kbit/s, 6 m 500 Kbit/s, 25 m 250 Kbit/s, 60 m 125 Kbit/s, 125 m 50 Kbit/s, 300 m 20 Kbit/s, 700 m 10 Kbit/s, 1000 m Yes Yes Yes Yes Yes RJ45, 8 pole
2, (I7, I8, I11, I12) 2, (I7, I8, I11, I12) 0.12 V 0.12 V Input delay ON: 20; input delay OFF: every cycle time <1 <1 < 30 No No No No < 30 No No No No
Input delay ON: 20; input delay OFF: every cycle time
Potential isolation Of the 2 additional inputs Potential isolation Electrical isolation between inputs and internal power supply Potential isolation Bus termination (first and last station) Terminal type Notes
For additional technical data EASY5 and EASY7 AWB2528-1508D, EASY8 AWB2528-1423D
2010 CA08103002Z-EN
www.eaton.com
...AC...
...AC...Basic devices, expansion devices
12/35
EASY512-AC-R.. Power supply Rated operational voltage Permissible range Frequency Input current At 115/120 V AC 60 Hz At 230/240 V AC 50 Hz Voltage dips (IEC/EN 61131-2) Heat dissipation At 115/120 V AC At 115/230 V AC Digital inputs 115/230 V AC Number Status display Potential isolation From power supply Between digital inputs From the outputs Potential isolation Rated voltage L (sinusoidal) On signal 0 On signal 1 Rated frequency Input current on signal "1" R1 to R12 mA V AC V AC Hz 0 - 40 79 - 264 50 - 60 No No Yes 8 LCD display (if provided) VA VA Normally 5 Normally 5 mA mA ms Normally 40 Normally 20 20 Ue V V AC Hz
EASY618-AC-RE
EASY719-AC-RC.
EASY819-AC-RC.
100/110/115/120/230/240 AC (+10/-15 %) 85264 50/60 ( 5%) 85264 50/60 ( 5%) Normally 70 Normally 35 20 Normally 10 Normally 10 12 85264 50/60 ( 5%) Normally 70 Normally 35 20 Normally 10 Normally 10 12 85264 50/60 ( 5%) Normally 70 Normally 35 20 Normally 10 Normally 10 12
No No Yes 0 - 40 79 - 264 50 - 60 12 x 0.25 (at 115 V AC, 60 Hz)12 x 0.5 (at 230 V AC, 50 Hz)
No No Yes 0 - 40 79 - 264 50 - 60
I1 to I6
mA
I7, I8
mA
6 x 0.25 (at 115 V AC, 60 Hz)6 x 0.5 (at 230 V AC, 50 Hz) 2 x 4 (at 115 V AC, 60 Hz)2 x 6 (at 230 V AC, 50 Hz)
I9 to I12
mA
6 x 0.25 (at 115 V AC, 60 Hz)6 x 0.5 (at 230 V AC, 50 Hz) 2 x 4 (at 115 V AC, 60 Hz)2 x 6 (at 230 V AC, 50 Hz) 4 x 0.25 (at 115 V AC, 60 Hz)4 x 0.5 (at 230 V AC, 50 Hz)
6 x 0.25 (at 115 V AC, 60 Hz)6 x 0.5 (at 230 V AC, 50 Hz) 2 x 4 (at 115 V AC, 60 Hz)2 x 6 (at 230 V AC, 50 Hz) 4 x 0.25 (at 115 V AC, 60 Hz)4 x 0.5 (at 230 V AC, 50 Hz)
Delay time Delay time (0 - 1/1 - 0) I1 - I6, I9 - I12, R1 - R12 Debounce ON, 50/60 Hz Debounce OFF, 50/60 Hz Delay time I7, I8 (1 - 0) Debounce ON, 50/60 Hz Debounce OFF, 50/60 Hz Delay time I7, I8 (0 - 1) Debounce ON, 50/60 Hz Debounce OFF, 50/60 Hz Max. admissible cable length (per input) R1 to R12 I1 to I6 I7, I8 I9 to I12 Relay outputs Notes m m m m Normally 40 Normally 100 Normally 40 Normally 40 Normally 100 Normally 40 Normally 40 Normally 100 Normally 40 Normally 60 Normally 100 Normally 60 ms ms 8066 2016 8066 2016 8066 2016 8066 2016 ms ms 160150 100100 8066 2016 8066 2016 120100 4033
ms ms
8066 2016
8066 2016
8066 2016
8066 2016
See technical data, relay outputs For additional technical data EASY5 and EASY7 AWB2528-1508D, EASY8 AWB2528-1423D
2010 CA08103002Z-EN
www.eaton.com
12/36
MFD-80, MFD-(AC)-CP...Display/operating units, CPU, communication modules
MFD-80, MFD-(AC)-CP...
MFD-80..
MFD-CP4
MFD-AC-CP4.. MFD-AC-CP8..
MFD-CP10.. MFD-CP8..
General Standards Dimensions (W x H x D) mm EN 61000-6-1/-2/-3/-4, IEC 60068-2-6, IEC 60068-2-27 86.5 x 86.5 x 21.5 (with buttons) 86.5 x 86.5 x 20 (without buttons) 0.13 2 x 22.5 mm, display fastened using 2 threaded fixing rings. Wall thickness: without top-hat rail (CPU) 1 6 mm with top-hat rail 1 4 mm mm2 mm2 mm Nm C C C % hPa 75 x 58 x 36.2 107.5 x 90 x 30 107.5 x 90 x 30
Weight Mounting
kg
0.14 Fitted on the fixing shaft of the display or on top-hat rail according to IEC/EN 60715, 35 mm deep (without display)
0.14 Fitted on the fixing shaft of the display or on top-hat rail according to IEC/EN 60715, 35 mm deep (without display)
Terminal capacity Solid Flexible with ferrule Flat-blade screwdriver Max. tightening torque Ambient climatic conditions Operating ambient temperature Condensation LCD display (clearly legible) Storage Relative humidity, non-condensing (IEC/EN 60068-2-30) Air pressure (in operation) Ambient mechanical conditions Protection type (IEC/EN 60529, EN50178, VBG 4) Vibrations (IEC/EN 60068-2-6) Constant amplitude 0.15 mm Constant acceleration, 2 g Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms Drop to IEC/EN 60068-2-31 Free fall, packaged (IEC/EN 60068-2-32) Mounting position Hz Hz Shocks Drop height mm m IP65 IP20 IP20 IP20 -25 - 55, low temperatures to IEC 60068-2-1, high temperatures to IEC 60068-2-2 Prevent condensation by means of suitable measures -5 - 50 -40 - 70 5 - 95 795 - 1080 -40 - 70 5 - 95 795 - 1080 -40 - 70 5 - 95 795 - 1080 -40 - 70 5 - 95 795 - 1080 0.24 (AWG 24 - 12) 0.22.5 (AWG 24 - 12) 3.5 x 0.6 0.24 (AWG 24 - 12) 0.22.5 (AWG 24 - 12) 3.5 x 0.6
10 - 57 57 - 150 18 50 1
10 - 57 57 - 150 18 50 1
10 - 57 57 - 150 18 50 1
2010 CA08103002Z-EN
www.eaton.com
MFD-80, MFD-(AC)-CP...
12/37
MFD-80..
MFD-CP4
MFD-AC-CP4.. MFD-AC-CP8..
MFD-CP10.. MFD-CP8..
Electromagnetic compatibility (EMC) Overvoltage category/ pollution degree Electrostatic discharge (ESD), to IEC EN 61000-4-2 Air discharge Contact discharge Electromagnetic fields (RFI), to IEC EN 61000-4-2 Radio interference suppression Burst to IEC/EN 61000-4-4 Supply cables Signal cables High-energy pulses (surge) (IEC/EN 61000-4-5, Level 2) Supply cables, symmetrical Radiated RFI, to IEC/EN 61000-4-6 Insulation resistance Clearance in air and creepage distances Insulation resistance Back-up/accuracy of the real-time clock Back-up time Accuracy of the real-time clock at 55 C Repetition accuracy of timing relays Accuracy of timing relay (of value) Resolution Range S Range M:S Range H:M Retentive memory Write cycles of the retentive memory (minimum) Notes 1010 (read write cycles) 1010 (read write cycles) % 0.02 0.02 s/day EN 50178, UL 508, CSA C22.2, No. 142 EN 50178 V kV kV 2 2 2 2 2 2 2 2
kV kV V/m
8 6 10
8 6 10
8 6 10
8 6 10
10
0.5 10
1 10
0.5 10
1)
1)
ms s min
5 1 1
5 1 1
For additional technical data EASY5 and EASY7 AWB2528-1508D, EASY8 AWB2528-1423D
1)
200 180 160 140 120 100 80 60 40 20 0 25C 55C
2 3
10 11 12 13 14 15 16 17 18 19 20
2010 CA08103002Z-EN
www.eaton.com
12/38
MFD-(AC)-CP...CPU, communication modules
MFD-(AC)-CP...
MFD-CP4.. Power supply Rated operational voltage Permissible range Permissible range Ripple Frequency Input current At 115/120 V AC 60 Hz At 230/240 V AC 50 Hz At 24 V DC Voltage dips (IEC/EN 61131-2) Heat dissipation At 115/120 V AC At 230240 V AC At 24 V DC Point-to-point connection Stations Baud rate easy500, easy700 easy800, MFD, EC4P Distance Potential isolation From power supply From the connected device Terminal type Power pulses Stations Data transfer rate/distance Number Max. 1 Yes Yes Spring-loaded terminals m MBit/s 9.6 kBaud 19.2 kBaud Max. 5 1 VA VA W 1.5 mA mA mA ms Normally 185 10 Ue V V AC V DC % Hz 20.428.8 5 24 DC (-15+20 %)
MFD-CP8.. MFD-CP10..
MFD-AC-CP4.. MFD-AC-CP8..
24 DC (-15+20 %)
100/110/115/120//230/240 AC (+10/-15 %) 85264 5060 ( 5%) Normally 90 Normally 60 10 Normally 11 Normally 15 Max. 5 Max. 8 1000 Kbit/s, 6 m 500 Kbit/s, 25 m 250 Kbit/s, 40 m 125 Kbit/s, 125 m 50 Kbit/s, 300 m 20 Kbit/s, 700 m 10 Kbit/s, 1000 m Yes Yes Yes Yes Yes RJ45, 8 pole
20.428.8 5 Normally 200 10 3.4 Max. 5 Max. 8 1000 Kbit/s, 6 m 500 Kbit/s, 25 m 250 Kbit/s, 40 m 125 Kbit/s, 125 m 50 Kbit/s, 300 m 20 Kbit/s, 700 m 10 Kbit/s, 1000 m Yes Yes Yes Yes RJ45, 8 pole
Potential isolation From power supply From the inputs From the outputs From PC interface, memory card, easyNet, easyLink Bus termination (first and last station) Terminal type
2010 CA08103002Z-EN
www.eaton.com
MFD-(AC)-R..., MFD-T...
MFD-(AC)-R..., MFD-T...I/O modules
12/39
MFD-R16 MFD-RA17 General Standards EN 61000-6-1/-2/-3/-4, IEC/EN 61000-4, IEC 60068-2-6, IEC 60068-2-27 89 x 90 x 44 0.15
MFD-AC-R16
MFD-T16 MFD-TA17
MFD-T.P..
Dimensions (W x H x D) Weight Mounting Terminal capacity Solid Flexible with ferrule Flat-blade screwdriver Power supply Solid Flexible with ferrule Flat-blade screwdriver Data cable Solid Flexible with ferrule Ambient climatic conditions Operating ambient temperature Condensation LCD display (clearly legible) Storage Relative humidity, non-condensing (IEC/EN 60068-2-30) Air pressure (in operation) Ambient mechanical conditions Pollution degree Protection type (IEC/EN 60529, EN50178, VBG 4) Vibrations (IEC/EN 60068-2-6) Constant amplitude 0.15 mm Constant acceleration, 2 g Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms Drop to IEC/EN 60068-2-31 Free fall, packaged (IEC/EN 60068-2-32) Mounting position Electromagnetic compatibility (EMC) Electrostatic discharge (ESD), to IEC EN 61000-4-2 Air discharge Contact discharge Electromagnetic fields (RFI), to IEC EN 61000-4-2 Radio interference suppression Burst to IEC/EN 61000-4-4 Supply cables Signal cables Power pulses (surge) (IEC/EN 61000-4-5)
mm kg
Fitted into the power supply unit. mm2 mm2 mm mm2 mm2 mm mm2 mm2 C C C % hPa -40 - 70 5 - 95 795 - 1080 2 IP20 -40 - 70 5 - 95 795 - 1080 2 IP20 -40 - 70 5 - 95 795 - 1080 2 IP20 -40 - 70 5 - 95 795 - 1080 2 IP20 0.24 (AWG 24 - 12) 0.22.5 (AWG 24 - 12) 3.5 x 0.6 0.082.5 (AWG 28 - 12) 0.081.5 (AWG 28 - 12) 0.24 (AWG 24 - 12) 0.22.5 (AWG 24 - 12) 3.5 x 0.6 0.082.5 (AWG 28 - 12) 0.081.5 (AWG 28 - 12) 0.24 (AWG 24 - 12) 0.22.5 (AWG 24 - 12) 3.5 x 0.6 0.082.5 (AWG 28 - 12) 0.081.5 (AWG 28 - 12) 0.24 (AWG 24 - 12) 0.22.5 (AWG 24 - 12) 3.5 x 0.6 0.082.5 (AWG 28 - 12) 0.081.5 (AWG 28 - 12)
-25 - 55, low temperatures to IEC 60068-2-1, high temperatures to IEC 60068-2-2 Prevent condensation by means of suitable measures
Hz Hz Shocks
10 - 57 57 - 150 18
10 - 57 57 - 150 18
10 - 57 57 - 150 18
10 - 57 57 - 150 18
Drop height
mm m
50 1 Vertical or horizontal
50 1
50 1
50 1
kV kV V/m
8 6 10
8 6 10
8 6 10
8 6 10
EN 55011 Class B, EN 55022 Class B kV kV kV 2 2 2 (supply cables, symmetrical) 0.5 (supply cables, symmetrical) 10 2 2 2 (supply cables, symmetrical) 0.5 (supply cables, symmetrical) 10 2 2 2 (supply cables, symmetrical) 0.5 (supply cables, symmetrical) 10 2 2 2 (supply cables symmetrical, MFD-AC-CP8..) 0.5 (supply cables, symmetrical, MFD-CP8..) 10
kV
Radiated RFI, to IEC/EN 61000-4-6 Insulation resistance Clearance in air and creepage distances Insulation resistance
MFD-(AC)-R..., MFD-TI/O modules
2010 CA08103002Z-EN
www.eaton.com
12/40
Multi-function display
I/O modules
MFD-(AC)-R..., MFD-T
MFD-R16 MFD-RA17 Digital inputs 24 V DC Number Inputs can be used as analog inputs Potential isolation From power supply Between digital inputs From the outputs From PC interface, memory card, easy NET, easyLink Rated operating voltage On signal 0 On signal 1 Input current on signal "1" I1 to I6 I1 to I4 I7, I8 I9, I10 I11, I12 Delay time from 0 to 1 Debounce ON Debounce OFF Delay time from 1 to 0 Debounce ON Debounce OFF ms ms 20 Normally 0.1 (I1 - I4), normally 0.4 (I5, I6, I9, I10), normally 0.2 (I7, I8, I11, I12) 100 4 (I1, I2, I3, I4) kHz <3 Square 2 (I1 + I2, I3 + I4) kHz 3 Square 90 4 (I1, I2, I3, I4) kHz m <3 Square < 20 ms ms 20 mA mA mA mA mA 3.3 (at 24 V DC) 2.2 (at 24 V DC) 3.3 (at 24 V DC) 2.2 (at 24 V DC) No No Yes Yes Ue Ue Ue V DC V DC V DC 24 < 5.0 (I1 - I6, I9 - I10), < 8 (I7, I8, I11, I12) > 15.0 (I1 - I6, I9 - I10), > 8.0 (I7, I8, I11, I12) 12 4 (I7, I8, I11, I12)
MFD-T16 MFD-TA17
MFD-T...P...
MFD-AC-R16
12 4 (I7, I8, I11, I12) No No Yes Yes 24 < 5.0 (I1 - I6, I9 - I10), < 8 (I7, I8, I11, I12) > 15.0 (I1 - I6, I9 - I10), > 8.0 (I7, I8, I11, I12) 3.3 (at 24 V DC) 2.2 (at 24 V DC) 3.3 (at 24 V DC) 2.2 (at 24 V DC) 20
6 2 (I11, I12) No No Yes Yes 24 < 5.0 (I1 - I4), < 8.0 (I11, I12) >15.0 (I1 - I4), > 8.0 (I11, I12) 3.3 (at 24 V DC) 2.2 (at 24 V DC) 20
Normally 0.1 (I1 - I4), normally 0.25 (I5 - I12) 20 Normally 0.1 (I1 - I4), normally 0.4 (I5, I6, I9, I10), normally 0.2 (I7, I8, I11, I12) 100 4 (I1, I2, I3, I4) <3 Square 2 (I1 + I2, I3 + I4) 3 Square 90 4 (I1, I2, I3, I4) <3 Square < 20 20 Normally 0.1 (I1 - I4), normally 0.2 (I11, I12)
Cable length (unshielded) Frequency counters Number Counter frequency Pulse shape Incremental counters Number Counter frequency Pulse shape Signal offset High-speed counter inputs Number Counter frequency Pulse shape Cable length, shielded Digital inputs 115/230 V AC Number Status display Potential isolation From power supply Between digital inputs From the outputs From PC interface, memory card, easyNet, easyLink Rated voltage L (sinusoidal) On signal 0 On signal 1 Rated frequency Input current on signal "1" I1 to I12
100 4 (I1, I2, I3, I4) <3 Square 2 (I1 + I2, I3 + I4) 3 Square 90 4 (I1, I2, I3, I4) <3 Square < 20 12 LCD display (if provided) No No Yes Yes
V AC V AC Hz mA
0 - 40 79 - 264 50 - 60 12 x 0.2 (at 115 V AC, 60 Hz), 12 x 0.5 (at 230 V AC, 50 Hz) 10100
Delay time Delay time (0 - 11 - 0) I1 - I12, 5060 Hz Max. admissible cable length (per input) I1 to I12
Normally 60
2010 CA08103002Z-EN
www.eaton.com
MFD-R..., MFD-T...
MFD-R..., MFD-T...I/O modules
12/41
MFD-RA17 MFD-TA17
MFD-TAP
4 (I7, I8, I11, I12) 2 (I11, I12) for MFD-T(A)P No No Yes Yes DC voltage 0 - 10 0.01 0.01 10 (value 0 - 1023) 11.2
Potential isolation From power supply From the digital inputs From the outputs From PC interface, memory card, easyNet, easyLink Input type Signal range Resolution, analog Resolution, digital Resolution Input impedance Accuracy of actual value Two MFD devices Within a single device Conversion time analog/digital Input current Cable length shielded
V DC V V Bit k
Potential isolation From power supply From the digital inputs From the digital outputs From PC interface, memory card, easyNet, easyLink Output type Signal range Max. output current Load resistance Overload and short-circuit protection Resolution, analog Resolution, digital Resolution, digital Recovery time Accuracy -25 C - 55 C 25C Conversion time, analog/digital
No No Yes Yes DC voltage 0 - 10 0.01 1 Yes 0.01 10 (value 0 - 1023) 100 2 1 Each CPU cycle
No No Yes Yes DC voltage 0 - 10 0.01 1 Yes 0.01 12 (value 0 - 4095) at QA01, MD 0.1, 0.01, 0.001 at MD 100 2 1 Each CPU cycle
V DC A k V DC Bit V DC s % % ms
% % ms mA m
MFD-TP, MFD-TAP Analog input temperature resistance Pt100 or Ni1000 sensors Number Input type resistance sensor Platinum sensor Pt100 according to DIN EN 60751, IEC 751 Nickel sensor Ni1000 according to DIN 43760 Temperature range Pt100, range A, selectable Ni1000, range A, selectable Pt100, range B Potential isolation From power supply From the digital inputs From the outputs From PC interface, memory card, easyNet, easyLink Resolution digital, scaling per sensor With operands "IA" and "MD", selectable under scaling With operand "MD", selectable under scaling Measurement value resolution analog/digital Measuring current Damage limit (in the case of a wiring error) Measurement method Accuracy (without EMC interference) Two MFD devices one above the other Pt100 RTD (offset error, linearity error, repetition accuracy, temperature dependency of the device included) Ni1000 RTD (offset error, linearity error, repetition accuracy, temperature dependency of the device included) Conversion time analog/digital Without sampling time setting, selectable per sensor With sampling time (adjustable), selectable per sensor Additional measurement aids Filtering (software), analog input signal smoothing (Pt1 characteristic), only with set sampling time, selectable for each detector Filter for suppression of certain frequencies and their multiples Diagnostics Card diagnostic Wire break diagnostic per sensor Wire break diagnostic per sensor Below lower measurement range Upper measuring range limit of sensor exceeded Cable length shielded
2 x Pt 100 or 2 x Ni1000 (according to part no.) MFD-TP12-PT... MFD-TP12-NI... C, (F) C, (F) C, (F) -40 - +90, (-40 - 194); 0 - 250, (32 - 482); 0 - 400, (32 - 752) -40 - +90, (-40 - 194); 0 - 250, (32 - 482) -0 - +8500, (32 - 1562); -200 - 200, (-328 - 392) No No Yes Yes Bit C, (F) Bit mA 12 (0 - 4095) 1, 0.1, (1), (0.1) Depending upon the scaling < 1.6 Apply external voltage Two or three wire per sensor, selectable by connection of sensor Normally 1; maximal 1.6 (Pt), 1.2 (Ni) 0.8 of measurement range 0,6 of measurement range
% % %
ms ms
Hz
50, 60, 250, 500 Yes Yes Yes Yes Yes < 10
2010 CA08103002Z-EN
www.eaton.com
12/42
...T..., MFD...T...Basic devices, expansion devices
...T..., MFD...T...
...T..., MFD...T...
12/43
EASY4-DC-ME
EASY512-DC-T..
EASY410-DC-TE EC4E-221-DT
EASY620-DC-TE
EASY721-DC-T..
EASY8..-DC-T..
MFD-T..
Transistor outputs Number Rated operating voltage Permissible range Ripple Supply current On signal 0 On signal 1 Protection against polarity reversal
Ue Ue
V DC V DC % mA mA
Yes (Caution: A short circuit will result if 0 V or GND is applied to the outputs in the event that the supply voltage is connected to the wrong poles.) No Yes 1 5 < 0.1 2.5 U = Ue -1 V Yes, thermal (analysis via diagnostics input R16) 1.4 Ie 4 8 16 Yes 40000 Yes Yes Max. 0.5 5 < 0.1 2.5 U = Ue -1 V Yes, thermal (analysis via diagnostics input I16, I15; R15, R16) 0.7 Ie 2 per output 8 16 Yes 40000 Yes Yes Max. 0.5 5 < 0.1 2.5 U = Ue -1 V Yes, thermal (analysis via diagnostics input R16) 0.7 Ie 2 per output 8 16 Yes 40000
Yes (Caution: A short circuit will result if 0 V or GND is applied to the outputs in the event that the supply voltage is connected to the wrong poles.)
Potential isolation Potential isolation from power supply, inputs From PC interface, memory card, easyNet, easyLink From the inputs Rated operational current on signal "1" DC Lamp load without Rv Residual current on signal "0" per channel Max. output voltage On "0" at external load < 10 M On 1 at Ie = 0.5 A Short-circuit protection
Ie
A W mA V V
Yes Yes Max. 0.5 5 < 0.1 2.5 U = Ue -1 V Yes, thermal (analysis via diagnostics input I16, I15; R15, R16) 0.7 Ie 2 16 32 Yes 40000
Yes Yes Max. 0.5 5 < 0.1 2.5 U = Ue -1 V Yes, thermal (analysis via diagnostics input I16, I15; R15, R16) 0.7 Ie 2 per output 16 32 Yes 40000
Yes Yes Yes Max. 0.5 3 (Q1 - Q4) 5 (Q5 - Q8) < 0.1 2.5 U = Ue -1 V Yes, electronic (Q1 Q4), thermal (Q5 Q8), (analysis via diagnostics input I16, I15) 0.7 Ie 2 per output 16 32 Yes 40000
Yes Yes Max. 0.5 5 (Q1 - Q4) < 0.1 2.5 U = Ue -1 V Thermal (Q1 Q4), (analysis via diagnostics input I16) 0.7 Ie 2 per output 8 16 Yes 40000
Short-circuit tripping current for Ra 10 m Total short-circuit current Peak short-circuit current Thermal cutout Max. operating frequency at constant resistive load RL < 100 k (dependent on program and load) Parallel connection of outputs With resistive load, inductive load with external suppressor circuit, combination within a group Number of outputs Max. total current Status indication of the outputs Inductive load to EN 60947-5-1 Without external suppressor circuit T0.95 = 1 ms, R = 48 , L = 16 mH Utilization factor Duty factor Max. operating frequency f = 0.5 Hz (max. ED = 50 %) DC-13, T0.95 = 72 ms, R = 48 , L = 1.15 H Utilization factor Duty factor Max. operating frequency f = 0.5 Hz (max. ED = 50 %) T0.95 = 15 ms, R = 48 , L = 0.24 H Utilization factor Duty factor Max. operating frequency f = 0.5 Hz (max. ED = 50 %) With external suppressor circuit Utilization factor Duty factor Max. switching frequency, max. duty factor Notes
A A A Ops/h
Q1 and Q2 Max. A
Group 1: Q1 to Q4
Group 1: Q1 to Q4
2 4 4 2 (Attention! Outputs must be activated simultaneously and for the same duration) LCD display (if provided)
Group 1: S1 - S4 Group 1: Q1 to Q4 Group 1: Q1 to Q4 Group 2: S5 - S8 Group 2: Q5 to Q8 Group 2: Q5 to Q8 4 4 4 2 (Attention! Outputs must be activated simultaneously and for the same duration) LCD display (if provided)
Group 1: Q1 to Q4 4
g % DF Operations
g % DF Operations
g % DF Operations
g % DF Operations
1 100
1 100
1 100
For additional technical data EASY5 and EASY7 AWB2528-1508D, EASY8 AWB2528-1423D, MFD-Titan AWB2528-1480D
2010 CA08103002Z-EN
www.eaton.com
2010 CA08103002Z-EN
www.eaton.com
12/44
...R..., MFD...R...Basic devices, expansion devices
...R..., MFD...R...
EASY202-RE
EASY618/719-..-R.. EASY8..--R
Relay outputs Number Outputs in groups of Parallel switching of outputs to increase performance Protection of an output relay Potential isolation From power supply From the inputs Electrical isolation in groups Safe isolation according to EN 50178 Basic insulation Lifespan, mechanical Contacts Conventional thermal current (10 A UL) Recommended for load: 12 V AC/DC Short-circuit proof p.f. = 1, characteristic B16 at 600 A Short-circuit proof p.f. = 0.5 - 0.7; characteristic B16 at 900 A Rated impulse withstand voltage Uimp contact coil Rated operating voltage Rated insulation voltage Safe isolation to EN 50178 between coil and contact Safe isolation to EN 50178 between two contacts Making capacity AC-15, 230 V AC, 3 A DC-13, 24 V DC, 5 A, 0.1 Hz Breaking capacity AC-15, 250 V AC, 3 A (600 ops./h) DC-13, L/R 150 ms, 24 V DC, 1 A (500 S/h) Filament bulb load 1000 W at 230/240 V AC 500 W at 115/120 V AC Fluorescent lamp load Fluorescent lamp load 10 x 58 W at 230/240 V AC With upstream electrical device Uncompensated Fluorescent lamp load 1 x 58 W at 230/240 V AC, conventionally compensated Switching frequency Mechanical operations Switching frequency Resistive load/lamp load Inductive load UL/CSA Continuous current at 240 V AC Continuous current at 24 V DC AC Control circuit rating codes (utilization category) Max. rated operational voltage Max. thermal continuous current p.f. = 1 at B 300 Max. make/break p.f. capacity 1 at B 300 DC Control circuit rating codes (utilization category) Max. rated operational voltage Max. thermal continuous current at R 300 Max. make/break capacity at R 300 Notes V DC A VA R 300 Light Pilot Duty 300 1 28/28 300 1 28/28 300 1 28/28 V AC A VA B 300 Light Pilot Duty 300 5 3600/360 300 5 3600/360 300 5 3600/360 A A 10 8 10 8 10 8 Operations Operations Operations 25000 25000 25000 25000 25000 25000 25000 25000 25000 Operations Operations 25000 25000 25000 25000 25000 25000 Operations Operations 300000 200000 300000 200000 300000 200000 Operations Operations 300000 200000 300000 200000 300000 200000 Ue Ui A mA A A kV V AC V AC V AC V AC 8 > 500 16 16 6 250 250 300 300 8 > 500 16 16 6 250 250 300 300 8 > 500 16 16 6 250 250 300 300 Operations V AC V AC x 106 Yes Yes Yes 300 600 10 Yes Yes Yes 300 600 10 Yes Yes Yes 300 600 10 2 2 Not permissible 4 1 Not permissible 6 1 Not permissible
x 106 Hz Hz Hz
10 10 2 0.5
10 10 2 0.5
10 10 2 0.5
For additional technical data EASY5 and EASY7 AWB2528-1508D, EASY8 AWB2528-1423D, MFD AWB2528-1480D
2010 CA08103002Z-EN
www.eaton.com
...ASI/DP/CO/DN
...ASI/DP/CO/DNBus modules
12/45
EASY205-ASI EASY204-DP General Standards EN 55011, EN 55022, IEC/EN 61000-4, IEC 62026 EN 55011, EN 55022, IEC/EN 61000-4, IEC 61158 35.5 x 90 x 58 (2 space units) 0.12 0.15
EASY221-CO EASY222-DN
Dimensions (W x H x D) Weight Mounting Terminal capacity Solid Flexible with ferrule Flat-blade screwdriver Max. tightening torque Ambient climatic conditions Operating ambient temperature Condensation Storage Relative humidity, non-condensing (IEC/EN 60068-2-30) Air pressure (in operation) Ambient mechanical conditions Protection type (IEC/EN 60529, EN50178, VBG 4) Vibrations (IEC/EN 60068-2-6) Constant amplitude 0.15 mm Constant acceleration, 2 g Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms Drop to IEC/EN 60068-2-31 Free fall, packaged (IEC/EN 60068-2-32) Mounting position Electromagnetic compatibility (EMC) Overvoltage category/pollution degree Electrostatic discharge (ESD), to IEC EN 61000-4-2 Air discharge Contact discharge Electromagnetic fields (IEC/EN 61000-4-3, RFI) Radio interference suppression Burst to IEC/EN 61000-4-4 AS-Interface cables Supply cables Signal cables Power pulses (surge), to IEC/EN 61000-4-5 Radiated RFI, to IEC/EN 61000-4-6 Insulation resistance Clearance in air and creepage distances Insulation resistance V/m
mm kg
EN 55011, EN 55022, IEC/EN 61000-4, EN 50325 EN 55011, EN 55022, IEC/EN 61000-4, IEC 62026 35.5 x 90 x 58 (2 space units) 0.15
Top-hat rail IEC/EN 60715, 35 mm or screw fixing using fixing brackets ZB4-101-GF1 (accessories). mm2 mm2 mm Nm C C % hPa 0.2 - 4 (AWG 22 - 12) 0.2 - 2.5 (AWG 22 - 12) 3.5 x 0.8 0.6 0.2 - 4 (AWG 22 - 12) 0.2 - 2.5 (AWG 22 - 12) 3.5 x 0.8 0.6
-2555, low temperatures to IEC 60068-2-1, high temperatures to IEC 60068-2-2 Prevent condensation by means of suitable measures -40 - 70 5 - 95 795 - 1080 IP20 -40 - 70 5 - 95 795 - 1080 IP20 10 - 57 57 - 150 18 50 1 Vertical or horizontal II/2 8 6 10
kV kV
kV kV kV kV V
2 10 EN 50178, UL 508, CSA C22.2, No. 142 EN 50178 0.5 (supply cables, symmetrical)
EN 50178
2010 CA08103002Z-EN
www.eaton.com
12/46
...ASI/DP/CO/DN
EASY205-ASI Power supply Rated operational voltage Permissible range Total power consumption of the AS interface Ripple Max. current consumption (at 24 V DC) Voltage dips (IEC/EN 61131-2) Heat dissipation at 24 V DC Protection against polarity reversal AS-Interface protection against polarity reversal AS-Interface profile Slave address Addressing unit interface Power supply LED indicators Supply LED display I/O addresses easy700/easy800 contact and coil AS-Interface S1 input 0 S2 input 1 S3 input 2 S4 input 3 R1 outputs 0 R2 outputs 1 R3 outputs 2 R4 outputs 3 R5 PARAMETEROUTPUT 0 R6 PARAMETEROUTPUT 1 R7 PARAMETEROUTPUT 2 R8 PARAMETEROUTPUT 3 AS-Interface Power: green Com Error: red Yes 7F (hex) 0 - 31 3.5 mm socket Ue V V DC mA % mA ms W 30 26.5 - 31.6
EASY204-DP
EASY221-CO
EASY222-DN
24 (-15/+20 %) 20.428.8 5 Normally 200 10 4.8 Yes Power LED (POW): green LED PROFIBUS-DP (BUS): red
24 (-15/+20 %) 20.428.8 5 Normally 200 10 4.8 Yes RUN LED (RUN): green LED ERROR (ERR): red
24 (-15/+20 %) 20.428.8 5 Normally 200 10 4.8 Yes Module status LED (MS): green Network status LED (NS): red/green
Network Terminal type Potential isolation Function Interface Bus protocol Baud rates Bus terminating resistors SUB-D 9 pole, socket 5 pole, pluggable screw terminal Between bus and power supply (simple), between bus and power supply and easy base unit (safe isolation) PROFIBUS-DP slave CANopen slave DeviceNet slave RS485 PROFIBUS-DP Automatic search up to 12 MBits Can be connected via plug 1 - 126 can be addressed via easy base unit with display or via EASY-SOFT All data R1 - R16, S1 - S8 Readwrite, time, day, daylight saving time All parameters of the EASY function relay CAN CANopen Automatic search up to 1 MBits Separate external bus termination required (120 ) 1 - 127 can be addressed via easy basic units with display or via easySoft CAN DeviceNet Automatic search up to 500 kBits Separate external bus termination required (120 ) 0 - 63 can be addressed via easy basic units with display or via easySoft RJ45
Bus addresses
2010 CA08103002Z-EN
www.eaton.com
EASY209-SE, EASY256-HCI
EASY209-SE, EASY256-HCIEthernet coupling unit, upstream device
12/47
EASY209-SE General Standards Dimensions (W x H x D) Weight Mounting Channels Voltage range for Ue Current increase 115/230 V AC Delay time Cable length Parallel switching of outputs to increase performance mA ms m Number mm kg
EASY256-HCI
EN 55011, EN 55022, IEC/EN 61000-4, EN 50178 35.5 x 90 x 58 (2 space units) 0.15 35.5 x 90 x 58 (2 space units) 0.15
Top-hat rail IEC/EN 60715, 35 mm or screw fixing using fixing brackets ZB4-101-GF1 (accessories). 6 0 - 264 4/6 40/37 100 Several possible (Off-delay extended depending on the number of parallel channels) Capacitive 0.2 - 4 (AWG 22 - 12) 0.2 - 2.5 (AWG 22 - 12) 3.5 x 0.8 0.6
Type of resistance Terminal capacity Solid Flexible with ferrule Flat-blade screwdriver Max. tightening torque Data cable Solid Flexible with ferrule Ambient climatic conditions Operating ambient temperature C mm2 mm2 mm2 mm2 mm Nm
0.2 - 4 (AWG 22 - 12) 0.2 - 2.5 (AWG 22 - 12) 3.5 x 0.8 0.6 0.25/1.5 (AWG 24/16) 0.14/ 1 (AWG 26/17) -2555
Condensation Storage Relative humidity, non-condensing (IEC/EN 60068-2-30) Air pressure (in operation) Ambient mechanical conditions Protection type (IEC/EN 60529, EN50178, VBG 4) Vibrations (IEC/EN 60068-2-6) Constant amplitude 0.15 mm Constant acceleration, 2 g Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms Drop to IEC/EN 60068-2-31 Free fall, packaged (IEC/EN 60068-2-32) Mounting position Electromagnetic compatibility (EMC) Overvoltage category/pollution degree Electrostatic discharge (ESD), to IEC EN 61000-4-2 Air discharge Contact discharge Electromagnetic fields (IEC/EN 61000-4-3, RFI) Radio interference suppression Burst to IEC/EN 61000-4-4 AS-Interface cables Supply cables Signal cables Ethernet interface cable COM interface cable Power pulses (surge), to IEC/EN 61000-4-5 Radiated RFI, to IEC/EN 61000-4-6 Insulation resistance Clearance in air and creepage distances Insulation resistance kV kV kV kV kV kV V V/m kV kV Hz Hz Shocks Drop height mm m C % hPa
-2555, low temperatures to IEC 60068-2-1, high temperatures to IEC 60068-2-2 Prevent condensation by means of suitable measures -40 - 70 5 - 95 795 - 1080 IP20 10 - 57 57 - 150 18 50 1 Vertical or horizontal II/2 8 6 RS-232 line unshielded: 3, shielded: 10 EN 55011 Class B, EN 55022 Class B 2 2 2 1 (supply cables, symmetrical) RS-232 line unshielded: 3, shielded: 10 EN 50178, UL 508, CSA C22.2, No. 142 EN 50178 EN 50178 II/2 8 6 10 -40 - 70 5 - 95 795 - 1080 IP20 10 - 57 57 - 150 18 50 1
2010 CA08103002Z-EN
www.eaton.com
12/48
EASY209-SE, EASY256-HCIEthernet gateway
EASY209-SE, EASY256-HCI
EASY209-SE Power supply Rated operational voltage Permissible range Ripple Max. current consumption (at 24 V DC) Voltage dips (IEC/EN 61131-2) Heat dissipation at 24 V DC Protection against polarity reversal Power supply LED indicators Supply LED display RJ-45 socket, top RJ-45 socket, bottom Gateway ready for operation Power supply SmartWire (contactor) Network Status (easyNet/CANopen) Status SmartWire Reset Strain relief Network Terminal type Potential isolation Bus protocol Bus terminating resistors Bus addresses Default settings Ethernet: IP adress 0.0.0.0 SUBNET screen: 255.255.0.0 coupling unit address 0.0.0.0 remote address 0.0.0.0 LED Front-LED Power: ON Front-LED COM active: flashes No Activity: OFF, Amber: Half Duplex, Green: Full Duplex No Link: OFF, Amber: 10 MBit/s, Green: 100 MBit/s Front: per pushbuttons > 2s By cable tie in fastener Yes Ue V V DC % mA ms W 24 (-15/+20 %) 20.428.8 5 Normally 65 1.7
2010 CA08103002Z-EN
www.eaton.com
...POW
...POWSwitched-mode power supply units
12/49
EASY200-POW
EASY400-POW EASY430-POW
EASY500-POW
EASY600-POW
General Standards Dimensions (W x H x D) Weight Mounting Terminal capacity Solid Flexible with ferrule Flat-blade screwdriver Max. tightening torque Ambient climatic conditions Operating ambient temperature C -2555, low temperatures to IEC 60068-2-1, high temperatures to IEC 60068-2-2 -25 - 55, low temperatures to IEC 60068-2-1, high temperatures to IEC 60068-2-2; -25 - 45 to UL/CSA Prevent condensation by means of suitable measures -40 - 70 5 - 95 795 - 1080 2000 -40 - 70 5 - 95 795 - 1080 2000 -40 - 70 5 - 95 795 - 1080 2000 -2555, low temperatures to IEC 60068-2-1, high temperatures to IEC 60068-2-2 -2555, low temperatures to IEC 60068-2-1, high temperatures to IEC 60068-2-2 mm2 mm2 mm Nm 0.2 - 4 (AWG 22 - 12) 0.2 - 2.5 (AWG 22 - 12) 3.5 x 0.8 0.6 3.5 x 0.8 0.6 3.5 x 0.8 0.6 3.5 x 0.8 0.6 mm kg EN 55011, EN 55022, IEC/EN 61000-4, IEC 60068-2-6, IEC 60068-2-27, EN 61000-6-2 35.5 x 90 x 58 (2 space units) 0.1 71.5 x 90 x 58 (4 space units) 0.25 71.5 x 90 x 58 (4 space units) 0.28 107.5 x 90 x 58 (6 space units) 0.3
Top-hat rail IEC/EN 60715, 35 mm or screw fixing using fixing brackets ZB4-101-GF1 (accessories).
Condensation Storage Relative humidity, non-condensing (IEC/EN 60068-2-30) Air pressure (in operation) Max. installation altitude above sea level, observe derating at higher altitudes Ambient mechanical conditions Pollution degree Protection type (IEC/EN 60529, EN50178, VBG 4) Vibrations (IEC/EN 60068-2-6) Constant amplitude 0.15 mm Constant acceleration, 2 g Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms Drop to IEC/EN 60068-2-31 Free fall, packaged (IEC/EN 60068-2-32) Mounting position Electromagnetic compatibility (EMC) Electrostatic discharge (ESD), to IEC EN 61000-4-2 Air discharge Contact discharge Electromagnetic fields (RFI), to IEC EN 61000-4-2 Radio interference suppression Burst pulses (IEC/EN 61000-4-4, level 3) Power pulses (surge) (IEC/EN 61000-4-5) Power pulses (surge) (IEC/EN 61000-4-5, Level 2), 24 V Radiated RFI, to IEC/EN 61000-4-6 Surge voltage (EN 50 178), 24 V Insulation resistance Clearance in air and creepage distances Insulation resistance Protection class Uout to Uin Potential isolation primary/secondary Input voltage Rated input voltage AC Protective switches AC Rated input voltage DC DC protective switches Voltage range Frequency range Mains failure bridging 115/230 V (IEC/EN 61000-4-11) Fuse 115/230 V V AC Hz ms A V V kV kV kV V kV kV kV V/m Hz Hz Shocks Drop height mm m C % hPa m
8 6 10 2
8 6 10 2
8 6 10 2
8 6 10 2
EN 55011 Class B; EN 55022 Class B, EN 50081-2 Class B 2 (supply cables, symmetrical) 0.5 (output cables, symmetrical) 10 6 EN 50178 EN 50178 Class II to IEC 60536 Yes, SELV (VDE 0100 Part 410; IEC 60364-4-41, HD 384.4.41 S2) EN 60950, EN 50178 100/120/230/240 (-15/+10 %) FAZ-C1/1 or FAZ-B6/1 85 - 264 FAZ-C2/1-DC 85 - 264 47 - 63 > 10/> 20 1.5 slow 85 - 264 FAZ-C2/1-DC 85 - 264 47 - 63 > 20/> 40 2/1 time delay 85 - 264 FAZ-C2/1-DC 85 - 264 47 - 63 > 20/> 40 2/1 time delay 85 - 264 FAZ-C2/1-DC 85 - 264 47 - 63 > 20/> 40 2/1 time delay 10 6 10 6 10 6
2010 CA08103002Z-EN
www.eaton.com
12/50
...POW
EASY200-POW
EASY400-POW EASY430-POW
EASY500-POW
EASY600-POW
Rating data Efficiency Power consumption Heat dissipation Input current Rated input current value 115/230 V AC Inrush current at 230 C 25 V Output voltage 12 V DC (reference voltage) Rated value Tolerance Switching peaks Effect of input voltage Effect with 25 100 % load change 24 V DC Rated value Tolerance Switching peaks 115/230 Effect of input voltage Effect with 25 100 % load change Can be connected in parallel to increase power Output current 12 V DC (reference voltage) Output current Effectiveness of current limitation Reduction of output voltage after current limitation Overload proof mA mA V 0 - 20 20 < 12 Yes, by current limitation permanently short-circuit proof Yes A A V 0 - 0.35 > 0.4 V DC % mVSS % % 24 3 < 50/30 1 1 24 3 <5 1 2 Yes 24 3 <5 1 2 Yes 24 3 <5 1 2 Yes V DC % mVSS % % 12 4 <7 1 1 A A Approx. 0.17/0.05 <5 Approx. 0.6/0.3 < 18 Approx. 0.8/0.4 < 30 Approx. 1/0.5 < 30 % W W > 80 Normally 7 Normally 1 > 83 Normally 35 Normally 5 > 85 Normally 70 Normally 10 > 85 Normally 115 Normally 18
Proof against sustained short circuit 24 V DC Output current Effectiveness of current limitation Reduction of output voltage after current limitation Overload proof Proof against sustained short circuit Special load conditions Lamp load, cold, 24 V DC Base load present Behavior in the event of emergency switch off in 24 V circuit, switch off using contactor (contactor load, no damage) Indication Indication of output voltage (LED, continuous green light = OK) V DC W W W
24
24
24
24
2010 CA08103002Z-EN
www.eaton.com
..., MFD-80...
Dimensions
..., MFD-80...Basic devices, expansions, display/operating unit
12/51
easy200
7.5
easy400 easy500
10.75 50
easy600 easy700
16.25 75 M4 16.25
102
110
90
102
110
90
M4 7.5 35.5
easy800
16.25
75 M4
16.25
102
45
102
110
90
48.5 70.5 72
MFD-80...
MFD-80
MFD-80-B
17
32
86.5
22.3
22.3 +0.4
MFD-CP...
30
MFD-CP...
28.25
30 62 86.5
28.25
20
13.7
21.5
13.7
2010 CA08103002Z-EN
www.eaton.com
30
45
110
90
12/52
MFD...Central processing unit, communication module, inputs/outputs modules
MFD...
MFD-CP... , MFD-AC-CP...
90
88.1
90
19
25
38.75 16.25
30 g0.2 75 107.5
38.75 16.25
4.5 29.5
MFD-80... + MFD-CP4
90
86.5
58
75 107.5 86.5
29.3 65.5
36.2
2010 CA08103002Z-EN
www.eaton.com
MFD..., SKF...
MFD..., SKF...Accessories
12/53
SKF-FF6
16
76
94
25
76
130
25
82
Protective diaphragm
MFD-XM-80
48
66
Protective cover
MFD-XS-80
88.5
95
88.5
22.5
86.5
25
Mounting rail
MFD-TS-144
60 23.75
30 g0.2 142.5
38.75
24
35
2010 CA08103002Z-EN
www.eaton.com